Bosch DVR-16K System information

Divar MR Digital Video Recorder
Type numbers DVR-8K, DVR-16K, DVR-8L, DVR-16L
en
Operation Manual_en
Digital Video Recorder
Table of contents | en
1
Table of contents
1
Safety
3
1.1
Important safety instructions
3
1.2
Safety precautions
4
1.3
Important Notices
4
2
Introduction
9
2.1
Features
2.2
Accessories
10
2.3
Front panel
11
2.4
Back panel
13
2.5
Remote Control
14
3
Connections and settings
17
3.1
Basic connection overview
17
9
3.2
Camera connections
18
3.3
Monitor connections
18
3.4
Connecting the RS-232C (COM 1) Port
18
3.5
CCTV keyboard connections
19
3.6
Network connection
19
3.7
Connecting the USB device
19
3.8
Connecting a RS-422/485 device
20
3.9
Connecting the BIPHASE port
21
3.10
Connecting the ALARM I/O port
22
3.11
System operation
23
3.12
Selecting the main monitor type
24
3.13
General explanation of the live screen on the main monitor
25
3.14
Selecting live screen mode
27
3.15
PTZ camera control
28
3.16
Viewing System Information
32
3.17
Viewing the System Log List
32
3.18
Configuration Menu
34
3.19
Camera settings
36
3.20
Schedule settings
43
3.21
Display settings
50
3.22
Event settings
52
3.23
Network settings
55
3.24
System settings
60
4
Recording
71
4.1
Instant Recording
71
5
Search and playback
73
5.1
Playback
73
5.2
Search
73
5.3
Functions available during playback
79
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
2
en | Table of contents
Digital Video Recorder
5.4
EXPORT
80
6
Control Center
83
6.1
PC minimum Requirements
83
6.2
Control Center installation
83
6.3
Connecting to the DVR
83
6.4
Main screen of DVR Control Center Program
86
6.5
Live Mode
88
6.6
Search mode
93
6.7
Remote Setup mode
6.8
Remote Export Settings
107
7
Additional programs
109
7.1
Alarm Notifier program
109
7.2
Main Screen of Alarm Notifier program
110
7.3
Archive Player program
112
7.4
Web Viewer program
115
8
REFERENCE
119
8.1
Troubleshooting
119
8.2
Recommended devices
122
8.3
Time zones
124
8.4
Factory default configuration settings
125
8.5
Recording Time Table (500GB HDD)
128
97
8.6
Recording Time Table (160GB HDD)
130
8.7
Specifications
133
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
Safety | en
1
Safety
1.1
Important safety instructions
3
Read, follow, and retain for future reference all of the following safety instructions. Heed all
warnings on the unit and in the operating instructions before operating the unit.
1.
Cleaning - Unplug the unit from the outlet before cleaning. Follow any instructions provided
with the unit. Generally, using a dry cloth for cleaning is sufficient, but a moist fluff-free cloth
or leather shammy may also be used. Do not use liquid cleaners or aerosol cleaners.
2.
Heat Sources - Do not install the unit near any heat sources such as radiators, heaters,
stoves, or other equipment (including amplifiers) that produce heat.
3.
Ventilation - Any openings in the unit enclosure are provided for ventilation to prevent overheating and ensure reliable operation. Do not block or cover these openings. Do not place the
unit in an enclosure unless proper ventilation is provided, or the manufacturer’s instructions
have been adhered to.
4.
Water - Do not use this unit near water, for example near a bathtub, washbowl, sink, laundry basket, in a damp or wet basement, near a swimming pool, in an outdoor installation, or
in any area classified as a wet location. To reduce the risk of fire or electrical shock, do not
expose this unit to rain or moisture.
5.
Object and liquid entry - Never push objects of any kind into this unit through openings as
they may touch dangerous voltage points or short-out parts that could result in a fire or electrical shock. Never spill liquid of any kind on the unit. Do not place objects filled with liquids,
such as vases or cups, on the unit.
6.
Lightning - For added protection during a lightning storm, or when leaving this unit unattended and unused for long periods, unplug the unit from the wall outlet and disconnect the cable
system. This will prevent damage to the unit from lightning and power line surges.
7.
Controls adjustment - Adjust only those controls specified in the operating instructions.
Improper adjustment of other controls may cause damage to the unit. Use of controls or
adjustments, or performance of procedures other than those specified, may result in hazardous radiation exposure.
8.
Overloading - Do not overload outlets and extension cords. This can cause fire or electrical
shock.
9.
Power cord and plug protection - Protect the plug and power cord from foot traffic, being
pinched by items placed upon or against them at electrical outlets, and its exit from the unit.
For units intended to operate with 230 VAC, 50 Hz, the input and output power cord must
comply with the latest versions of IEC Publication 227 or IEC Publication 245.
10.
Power disconnect - Units with or without ON/OFF switches have power supplied to the unit
whenever the power cord is inserted into the power source. The power cord is the main
power disconnect device for switching off the voltage for all units.
11.
Power sources - Operate the unit only from the type of power source indicated on the label.
Before proceeding, be sure to disconnect the power from the cable to be installed into the
unit.
12.
Servicing - Do not attempt to service this unit yourself. Opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
13.
Damage requiring service - Unplug the unit from the main AC power source and refer servicing to qualified service personnel when any damage to the equipment has occurred, such as:
–
the power supply cord or plug is damaged;
–
exposure to moisture, water, and/or inclement weather (rain, snow, etc.);
–
liquid has been spilled in or on the equipment;
–
an object has fallen into the unit;
–
unit has been dropped or the unit cabinet is damaged;
–
unit exhibits a distinct change in performance;
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
4
en | Safety
Digital Video Recorder
–
1.2
unit does not operate normally when the user correctly follows the operating instructions.
14.
Replacement parts - Be sure the service technician uses replacement parts specified by the
manufacturer, or that have the same characteristics as the original parts. Unauthorized substitutions could void the warranty and cause fire, electrical shock, or other hazards.
15.
Safety check - Safety checks should be performed upon completion of service or repairs to
the unit to ensure proper operating condition.
16.
Installation - Install in accordance with the manufacturer’s instructions and in accordance
with applicable local codes.
17.
Attachments, changes or modifications - Only use attachments/accessories specified by
the manufacturer. Any change or modification of the equipment, not expressly approved by
Bosch, could void the warrantee or, in the case of an authorization agreement, authority to
operate the equipment.
Safety precautions
DANGER! High risk:
This symbol indicates an imminently hazardous situation such as
“Dangerous Voltage” inside the product.
If not avoided, this will result in an electrical shock, serious bodily
injury, or death.
WARNING! Medium risk:
Indicates a potentially hazardous situation.
If not avoided, this could result in serious bodily injury or death.
CAUTION! Medium risk:
Indicates a potentially hazardous situation.
If not avoided, this may result in minor or moderate injury.
Alerts the user to important instructions accompanying the unit.
CAUTION! Low risk: (without safety alert symbol)
Indicates a potentially hazardous situation.
if not avoided, this may result in property damage or risk of
damage to the unit.
NOTICE!
This symbol indicates information or a company policy that
relates directly or
indirectly to the safety of personnel or protection of property.
1.3
Important Notices
Accessories - Do not place this unit on an unstable stand, tripod, bracket, or mount. The unit may
fall, causing serious injury and/or serious damage to the unit. Use only with the cart, stand, tripod,
bracket, or table specified by the manufacturer. When a cart is used, use caution and care when
moving the cart/apparatus combination to avoid injury from tip-over. Quick stops, excessive force, or
uneven surfaces may cause the cart/unit combination to overturn. Mount the unit per the manufacturer’s instructions.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
Safety | en
5
All-pole power switch - Incorporate an all-pole power switch, with a contact separation of at least
3 mm in each pole, into the electrical installation of the building. If it is needed to open the housing for servicing and/or other activities, use this all-pole switch as the main disconnect device for
switching off the voltage to the unit.
Battery replacement - A lithium battery is located inside the unit enclosure. To avoid danger of
explosion, replace the battery as per instructions. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of the replaced battery in an environmentally friendly way.
Refer all servicing to qualified service personnel.
CAUTION!
Class I Laser Product
Invisible laser radiation when open. Avoid exposure to beam.
This warning is applicable only to those models that contain an internal DVD burner which uses a
certified Class I laser.
Coax grounding:
–
Ground the cable system if connecting an outside cable system to the unit.
–
Connect outdoor equipment to the unit’s inputs only after this unit has had its grounding
plug connected to a grounded outlet or its ground terminal is properly connected to a ground
source.
–
Disconnect the unit’s input connectors from outdoor equipment before disconnecting the
grounding plug or grounding terminal.
–
Follow proper safety precautions such as grounding for any outdoor device connected to this
unit.
U.S.A. models only - Section 810 of the National Electrical Code, ANSI/NFPA No.70, provides information regarding proper grounding of the mount and supporting structure, grounding of the coax to
a discharge unit, size of grounding conductors, location of discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
NOTICE!
This device is intended for use in public areas only.
U.S. federal law strictly prohibits surreptitious recording of oral
communications.
Disposal - Your Bosch product was developed and manufactured with high-quality material and
components that can be recycled and reused. This symbol means that electronic and electrical appliances, which have reached the end of their working life, must be collected and disposed of separately from household waste material. Separate collecting systems are usually in place for disused
electronic and electrical products. Please dispose of these units at an environmentally compatible
recycling facility, per European Directive 2002/96/EC.
Environmental statement - Bosch has a strong commitment towards the environment. This unit has
been designed to respect the environment as much as possible.
Electrostatic-sensitive device - Use proper CMOS/MOS-FET handling precautions to avoid electrostatic discharge.
NOTE: Wear required grounded wrist straps and observe proper ESD safety precautions when handling the electrostatic-sensitive printed circuit boards.
Fuse rating - For security protection of the device, the branch circuit protection must be secured
with a maximum fuse rating of 16A. This must be in accordance with NEC800 (CEC Section 60).
Grounding and polarization - This unit may be equipped with a polarized alternating current line plug
(a plug with one blade wider than the other blade). This safety feature allows the plug to fit into
the power outlet in only one way. If unable to insert the plug fully into the outlet, contact a locally
certified electrician to replace the obsolete outlet. Do not defeat the safety purpose of the polarized
plug.
Alternately, this unit may be equipped with a 3-pole grounding plug (a plug with a third pin for earth
grounding). This safety feature allows the plug to fit into a grounded power outlet only. If unable to
insert the plug into the outlet, contact a locally certified electrician to replace the obsolete outlet.
Do not defeat the safety purpose of the grounding plug.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
6
en | Safety
Digital Video Recorder
Moving - Disconnect the power before moving the unit. Move the unit with care. Excessive force or
shock may damage the unit and the hard disk drives.
Outdoor signals - The installation for outdoor signals, especially regarding clearance from power
and lightning conductors and transient protection, must be in accordance with NEC725 and NEC800
(CEC Rule 16-224 and CEC Section 60).
Permanently connected equipment - Incorporate a readily accessible disconnect device in the building installation wiring.
Pluggable equipment - Install the socket outlet near the equipment so it is easily accessible.
Power disconnect - Units have power supplied whenever the power cord is inserted into the power
source. The power cord is the main power disconnect for all units.
Rack-mount
–
Ventilation - Do not place this unit in a built-in installation or rack without proper ventilation
or adhering to the manufacturer’s instructions. The equipment must not exceed its maximum
operating temperature requirements.
–
Mechanical loading - Properly mount the equipment in a rack to prevent a hazardous condition due to uneven mechanical loading.
SELV - All the input/output ports are Safety Extra Low Voltage (SELV) circuits. SELV circuits should
only be connected to other SELV circuits.
Video loss - Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. To minimize the risk
of lost digital information, Bosch Security Systems recommends multiple, redundant recording systems, and a procedure to back up all analog and digital information.
FCC & ICES Information (residential applications)
(U.S.A. and Canadian Models Only)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
–
reorient or relocate the receiving antenna;
–
increase the separation between the equipment and receiver;
–
connect the equipment into an outlet on a circuit different from that to which the receiver is
connected;
–
consult the dealer or an experienced radio/TV technician for help.
Intentional or unintentional modifications, not expressly approved by the party responsible for compliance, shall not be made. Any such modifications could void the user’s authority to operate the
equipment. If necessary, the user should consult the dealer or an experienced radio/television technician for corrective action.
The user may find the following booklet, prepared by the Federal Communications Commission,
helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the
U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4.
Disclaimer
Underwriter Laboratories Inc. (“UL”) has not tested the performance or reliability of the security or
signaling aspects of this product. UL has only tested fire, shock and/or casualty hazards as outlined
in UL’s Standard(s) for Safety for Information Technology Equipment, UL 60950-1. UL Certification does
not cover the performance or reliability of the security or signaling aspects of this product.
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR CERTIFICATIONS WHATSOEVER REGARDING
THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING-RELATED FUNCTIONS OF
THIS PRODUCT.
Copyright
This user guide is the intellectual property of Bosch Security Systems and is protected by copyright.
All rights reserved.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
Safety | en
7
Trademarks
All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly.
NOTICE!
This operation manual has been compiled with great care and
the information it contains has been thoroughly verified. The text
was complete and correct at the time of printing. The ongoing
development of the products may mean that the content of the
user guide can change without notice. Bosch Security Systems
accepts no liability for damage resulting directly or indirectly from
faults, incompleteness or discrepancies between the user guide
and the product described.
More information
For additional information, please contact the Bosch Security Systems location nearest you or visit
our web site at www.boschsecurity.com
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
8
en | Safety
F01U | 2.0 | 2008.12
Digital Video Recorder
User Manual
Bosch Security Systems
Digital Video Recorder
Introduction | en
2
Introduction
2.1
Features
•
Stable embedded operating system.
•
Small file sizes with MPEG-4 compression.
•
Internal storage capacity to 2TB.
•
NTSC and PAL selectable video format.
•
Full realtime recording:
•
•
-
Up to 480IPS@352 X 240: DVR-16K, DVR-16L NTSC
-
Up to 400IPS@352 X 288: DVR-16K, DVR-16L PAL
-
Up to 240IPS@352 X 240: DVR-8K, DVR-8L NTSC
-
Up to 200IPS@352 X 288: DVR-8K, DVR-8L PAL
Various recording resolutions and quality levels:
-
4CIF (704x480), 2CIF (704x240), CIF(352x240) : NTSC
-
4CIF (704x576), 2CIF (704x288), CIF(352x288) : PAL.
-
5 step quality level (Lowest, Low, Normal, High, Best).
Easy operation using various user interface & user friendly GUI:
-
•
Optical mouse, Full function IR remote controller, Jog/Shuttle
Powerful multiplex functions:
-
•
9
Simultaneous live display, recording, playback, network transmission, back-up.
Various search functions:
-
Date/time search, event search, bookmark search, smart search.
•
Event data protection by event partition recording.
•
Pre-alarm recording (up to 1 minute).
•
Motion event recording and preview test function of motion sensitivity.
•
Recording image rate & quality adjustment per individual camera.
•
Powerful record scheduling.
•
Instant playback in live mode.
•
Perfect audio/video synchronization.
•
Automatic backup by schedule.
•
Image authentication (Watermark).
•
Three USB 2.0 ports for backup interface.
•
Setup configuration export/import with USB memory stick or network.
•
Easy system software update with USB memory stick or network.
•
Control Center PC software can manage max 100 DVR.
•
Max five clients can access one DVR server simultaneously.
•
Network bandwidth throttle:
-
Automatically adjust a bandwidth according to network speed status of unit.
•
Remote alarm notification via PC software or e-mail.
•
Time and date sync from NTP server.
•
Daylight saving mode.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
10
en | Introduction
Digital Video Recorder
•
Covert camera protection.
•
User management (User level control).
•
PTZ Control:
-
For more details see "8.2.4 Supported PTZ camera list".
-
Dome camera telemetry control (Dome OSD control).
Note:
Model DVR-16L (16 Channel) is used for the description, operation and
details provided in this operation manual.
2.2
Accessories
Remote Control
AAA Type Batteries for Remote
Control
Rack Mount Bracket
Mouse
Divar MR PC software
Screws for rack mount bracket
D
IEL
1
SH
RL
CT
D
IEL
H
2
S
RL
T
C
D
IEL
3
SH
RL
CT
D
IEL
4
SH
RL
CT
D
IEL
5
SH
RL
T
C
D
IEL
SH
Power plugs
R 3A
1A E 3B
1B L 4A
2A AY 4B
2 B ND
G
9
1 IN 10
2 ND
G 11
3 IN 12
4 ND
G 13
5 IN 14
6 ND
G 15
7 IN 16
8
Connection board for Alarm I/O
and Biphase
Figure 2.1 Accessories
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
2.3
Introduction | en
11
Front panel
DVR-16K / DVR-16L
a
b
g
h
c
i
j
d
k
e
f
l
DVR-8K / DVR-8L
a
b
g
h
c
i
j
d
k
e
f
l
Figure 2.2 Front panel
a
Arrow Buttons (b B v V): Select or move between the menu options.
(ENTER): Confirms menu selections.
b
Function Buttons
: Displays the setup menu.
: Display the monitor A control menu to set the screen mode to full, 4, 6, 8, 9 or 16
screens. Set the video output signal to VGA mode.
: Display the monitor B control menu. Set the video output signal to MON A mode.
: Switches the unit to PTZ mode to control the connected PTZ camera.
: Press to see different multiscreen modes.
: View all channels in sequence.
: Displays the search menu.
: Starts or stops instant recording of the selected camera (yellow border).
: Cancels alarm activation and returns the system to the condition before the alarm was
activated.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
12
en | Introduction
Digital Video Recorder
c
Disc Tray (DVR-8L and DVR-16L only)
Insert a disc here.
d
Channel Buttons
You can input a number with the channel buttons. You can also use the channel buttons for
sub-function with ALT button (The COPY, IRIS +, SET, CLEAR, MOVE and TOUR buttons of 8
channel DVR are used for subfunction without ALT button.).
•
•
•
•
•
•
•
•
•
•
•
•
•
•
The LED in the button indicates the status as follows:
- Off: The current status is for live mode.
- Red: Recording mode.
Blinks when an event occurs.
(1) OPEN: Opens or closes the disc tray (DVR-8L and DVR-16L only).
(2) LOCK: Displays the lock menu to change the user type or disable the system
operation.
(3) ZOOM - / (4) ZOOM +: Adjusts the zoom level of the PTZ camera.
(5) LOG: Displays or removes the System Log List.
(6) INFO: Displays or removes system information.
(7) FOCUS - / (8) FOCUS +: Adjusts focus position of the PTZ camera.
(9) COPY: Copies the recording data to an external device.
(10) MARK: Sets the mark point for recording search. You can set the mark point during
the single channel playback of recorded data.
(11) IRIS - / (12) IRIS +: Adjusts iris position of the PTZ camera.
(13) SET: Registers the PTZ camera's preset position.
(14) CLEAR: Deletes a memorized preset position of the PTZ camera.
(15) MOVE: Moves the PTZ camera to the preset position.
(16) TOUR: Tours all registered preset positions in the PTZ camera.
e
Shuttle Ring: Fast forward or reverse picture search when the dial is rotated.
f
JOG Dial: Allows a forward or reverse frame search.
In pause mode, plays recorded images frame by frame through rotation. Increases or
decreases the options value.
g
ESC: Use to return to previous level or to exit menu system without saving.
h
Playback Control Buttons
- X: Pauses playback.
- m: Reverse search the recorded images.
- bB: Playback or reverse playback of recorded images.
- M: Forward search the recorded images.
- x: Stops playback.
i
Indicators
: Lights when the DVR is powered.
: Blinks when the HDD is accessed.
: Lights when the alarm is active.
: Lights when a network cable is connected.
j
USB Port
Connect an external USB device for back up or playback.
k
Remote Sensor
Point the remote control here.
l
ALT
Activate if you use the Sub-function of the channel button.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
2.4
Introduction | en
13
Back panel
DVR-16K / DVR-16L
a
d e
b
f
g
c
h
i
j
k fl m
n
o
DVR-8K / DVR-8L
a
d e
b
f
g
c
h
i
j
k
lm
n
o
Figure 2.3 Back panel
a
VIDEO INPUT: Connect the camera’s video output to these BNC connectors.
b
LOOP OUT: The signal from VIDEO INPUT connector is looped out to this connector.
c
Power Cord Inlet (AC IN): Connect the power plug.
d
AUDIO OUT: Connect the audio input signal of an external device.
e
BIPHASE: Connect a pan/tilt/zoom control unit via the supplied 15-pole D-type connector
board.
f
AUDIO IN: Connect the audio output of an external device.
g
ALARM I/O: Connect up to 16 alarm inputs via the supplied 25-pin D-type connector board.
Connect up to 8 alarm output relays via the supplied 25-pin D-type connector board.
h
RS-422/485 Terminals: Connect RS422/485 compatible cameras.
i
KBD IN: Connect a Bosch CCTV keyboard unit to the KBD IN socket.
j
COM1: Use to connect to a host device equipped with RS-232C connector (such as a personal
computer).
k
ETHERNET Port: Connect the ethernet 10/100Mbps network cable for controlling this unit via
a PC network.
l
MON B (BNC Type Connector): Connect to spot monitor or display device.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
14
2.5
en | Introduction
Digital Video Recorder
m
MON A (BNC Type Connector): Connect to main monitor or display device.
n
VGA: Connect a VGA monitor.
o
USB Ports: Connect optional extension USB devices (e.g. mouse, memory stick).
Remote Control
Figure 2.4 Remote control.
•
LOCK: Displays the lock menu to change user type or disable system operation.
•
ACK: Cancels alarm activation and returns the system to the condition before the alarm was
activated.
•
: Display the monitor A control menu to set the screen mode to full, 4, 6, 8, 9 or 16
screens.
•
: Display the monitor B control menu to allow spot monitor control.
•
: Press to see different multiscreen modes.
•
: View all channels in sequence.
•
ESC: Use to return to previous level or to exit menu system without saving.
•
MENU: Displays the setup menu.
•
Arrow Buttons (b B v V): Selects or moves between the menu options.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
Introduction | en
15
•
ENTER: Confirms menu selections or go to full screen of a selected camera in multiscreen.
Pressing this key again to return from full screen to multiscreen.
•
COPY: Copies the recorded data to an external device.
•
SEARCH: Displays the search menu.
•
MARK: Sets the mark point for recording search. You can set the mark point during the single
channel playback of recorded data.
•
PAUSE (X): Pauses playback.
•
STOP(x): Stops playback.
•
REC (z): Starts or stops recording.
•
m / c: Reverse search; Searches the recorded images in reverse sequence.
•
bB: Playback or reverse playback of recorded images.
•
M / C: Forward search; Searches the recorded images in forward sequence.
•
Number Buttons (0, 1-9): To select the PTZ preset number, ID, or channel.
•
INFO: Displays or removes the system information window.
•
LOG: Displays or removes the System Log List window.
•
PTZ: Switches this unit to PTZ mode to control the connected PTZ camera.
•
TOUR: Tours all registered preset positions in the PTZ camera.
•
ZOOM + / -: Adjusts the zoom level of the PTZ camera.
•
FOCUS + / -: Adjusts the focus of the PTZ camera.
•
IRIS + / -: Adjusts the iris of the PTZ camera.
•
PRESET
•
-
SET: Registers the PTZ camera’s preset positions.
-
CLEAR: Deletes a memorized preset position.
-
MOVE: Moves the camera to the preset position.
ID: Set the appropriate DVR system ID to operate via the IR Remote Controller when using
multiple DVRs. Press the ID button, then press the number button within 2 seconds to select
the system ID of the DVR. If you set the system ID to “0”, you can control multiple DVR at the
same time.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
16
en | Introduction
F01U | 2.0 | 2008.12
Digital Video Recorder
User Manual
Bosch Security Systems
Digital Video Recorder
3
Connections and settings | en
17
Connections and settings
Precautions
3.1
•
There are various ways to connect the unit, depending on the camera and other equipment.
Please refer to the camera manual or the manuals for other devices as necessary for additional
connection information.
•
Be sure to switch off the camera before installation and connection.
•
Default the main monitor (MON A) will start up in VGA mode. See section 3.12 for selection
of the main monitor type.
Basic connection overview
a
b
c
e
f
g
h
j
i
d
SHIELD
CTRL 1
SHIELD
CTRL 2
SHIELD
CTRL 3
SHIELD
CTRL 4
SHIELD
CTRL 5
SHIELD
k
l
m
n
1A R 5A
2A E
L 6A
3A A 7A
4A Y 8A
GND
9
1
2 IN 10
GND
3 IN 11
12
4
GND
13
5
IN
14
6
GND
7 IN 15
16
8
Figure 3.1 Basic connection overview
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
18
3.2
en | Connections and settings
Digital Video Recorder
a
Connect the cameras to the BNC loop-through camera inputs (automatically terminated).
b
Connect the Monitor, DVR, VCR, or others to the video out BNC.
c
Connect the power cord to the unit.
d
Connect an audio amplifier.
e
Connect a pan/tilt/zoom control unit via the supplied 15-pole D-type connector board.
f
Connect up to 16 (alarm) inputs or connect up to 8 alarm output relays via the supplied 25-pin
D-type connector board.
g
Connect PTZ cameras or DVRs.
h
Connect a Bosch CCTV keyboard unit to the KBD IN socket.
i
Connect audio (line input).
j
Connect to your network via the Ethernet port or use the RS232 connector to connect directly
to a PC serial port (for service purposes).
k
Connect monitor B to the BNC output MON B.
l
Connect monitor A to the BNC output MON A.
m
Connect a VGA monitor.
n
Connect optional extension USB devices (e.g. mouse, memory stick).
Camera connections
Connect cameras to the unit using 75-ohm video coaxial cables with BNC connectors. There are
two BNC connectors for each camera. Either connector can receive a camera’s signal. This signal
is looped-through (directly connected) to the other connector, so that you can send the camera’s
signal to other equipment. The camera input connectors are auto-terminating, so you do not need to
add a terminator to the output connector if no additional equipment is connected.
If the camera signal is looped-through to additional equipment, make sure that the end of the video
line is terminated with a 75-ohm terminator.
3.3
Monitor connections
Connect the unit to the monitors via 75-ohm video coaxial cables with BNC connectors. The unit
provides a 1Vpp CVBS signal.
If the monitor has a loop-through connection and you are not using the loopthrough output, then
select the 75-ohm impedance setting on the monitor. If the monitor’s loop-through output is
connected to an additional device, the device’s termination is set to 75 ohms and the monitor’s
termination is set to high impedance (note that this is not necessary on devices with automatic
termination).
3.4
Connecting the RS-232C (COM 1) Port
The serial RS232 console port connector is used to connect a PC to the unit for service purposes.
Use a null-modem cable to connect the serial port of the PC to the unit.
This terminal is compliant with the RS-232C standard.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
3.5
Connections and settings | en
19
CCTV keyboard connections
The keyboard input connector is used to connect an external CCTV keyboard to the unit. Connect
the keyboard to the KBD IN connector.
For short distances (up to 30m), standard 6-core telecom flat cable can be used to supply power
and signal connections for the keyboard.
For distances over 30m between keyboard and Divar MR, the Keyboard Extension Kit (LTC 8557)
must be used. This kit provides junction boxes, cables and the appropriate power supply for the
external keyboards. The recommended cable type is Belden 9841 or equivalent.
3.6
Network connection
3.6.1
LAN connection
Connect the LAN port to an available 10/100 base-T port with a straight ethernet cable (not
supplied).
3.6.2
Automatic network configuration
The DVR can automatically obtain and configure the network interface via DHCP.
3.6.3
Manually configure network
The DVR may be manually configured by assigning an IP address, subnet mask, gateway and DNS.
3.7
Connecting the USB device
3.7.1
USB memory device
Insert the memory device into the USB port. The system automatically recognizes the device.
Using a USB memory device the system software can be easily upgraded.
3.7.2
USB backup device
Connect the USB cable of the USB backup device to the USB port on the rear panel of the unit.
(Example: HDD or other external storage).
3.7.3
Mouse
Connect the USB mouse for function control of the unit.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
20
3.8
en | Connections and settings
Digital Video Recorder
Connecting a RS-422/485 device
Use this port to connect PTZ cameras.
Connect the PTZ serial communication lines to the RS-422/485 terminal.
Notes:
•
•
•
When connecting lines, connect the TX- of the DVR to RX- of the PTZ
unit and TX+ of the DVR to RX+ of the PTZ unit correctly.
Recommended initial data are 9600 Baud Rate, 8 Data bits, 1 Stop bit
and No parity.
When connecting PTZ cameras to DVRs it is necessary to set the setup
menu for this unit according to the RS-485 settings of the camera and
DVRs.
Figure 3.2 RS-422/485 connections
RS-422/485 Terminal
Description
TX- (DATA -)
Data Transmission
TX+ (DATA +)
Data Transmission
RX- (DATA -)
Data Reception
RX+ (DATA +)
Data Reception
GND
Shield
Table 3.1 RS-422-485 connections
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
3.9
Connections and settings | en
21
Connecting the BIPHASE port
The Biphase port is used for connecting cameras that use Bosch Biphase communications to
control camera positioning. Five Biphase outputs are provided for dome camera and pan, tilt and
zoom control. The screw terminal connection board supplied with the unit simplifies all Biphase
connections to the unit.
Maximum cable length per Biphase output is 1.5 kilometers (0.9 miles). Maximum number of
controllable cameras is 4 per Biphase output.
8
1
15
9
SHIELD
CTRL 1
SHIELD
CTRL 2
SHIELD
CTRL 3
SHIELD
CTRL 4
SHIELD
CTRL 5
SHIELD
Figure 3.3 Biphase port connector
BIPHASE port - 15-pole D-type socket
Signal name:
Pin no.
Code 1 -
1
Biphase control ch. 1 (minus)
Description
Code 1 +
2
Biphase control ch. 1 (plus)
Shield
3
System ground/cable shield.
Code 2 -
4
Biphase control ch. 2 (minus)
Code 2 +
5
Biphase control ch. 2 (plus)
Shield
6
System ground/cable shield.
Code 3 -
7
Biphase control ch. 3 (minus)
Code 3 +
8
Biphase control ch. 3 (plus)
Shield
9
System ground/cable shield.
Code 4 -
10
Biphase control ch. 4 (minus)
Code 4 +
11
Biphase control ch. 4 (plus)
Shield
12
System ground/cable shield.
Code 5 -
13
Biphase control ch. 5 (minus)
Code 5 +
14
Biphase control ch. 5 (plus)
Shield
15
System ground/cable shield.
Table 3.2 Biphase pin configuration
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
22
en | Connections and settings
3.10
Digital Video Recorder
Connecting the ALARM I/O port
Alarm inputs and outputs are supplied via a 25-pole D-type socket. The screw terminal input/output
connection board supplied with the unit simplifies all alarm connections to the unit.
Relay 1
13
1
1A
Relay 2
25
14
2A
Relay 3
1A R 5A
2A E
L 6A
3A A 7A
4A Y 8A
GND
1
9
2 IN 10
GND
3 IN 11
4
12
GND
5
13
IN
6
14
GND
7 IN 15
8
16
3A
GND
Relay 7
7A
Relay 8
8A
Figure 3.4 Alarm I/O port connector
3.10.1
Connecting the Inputs
Each (alarm) input line can be switched by a relay contact from devices such as pressure pads,
passive infra red detectors, smoke detectors and similar devices.
Wire them as either N/O (Normally Open) or N/C (Normally Closed). You can configure the alarm
inputs as N/O or N/C in the menu system. The default is N/O.
3.10.2
Connecting the Alarm Outputs
The eight alarm output relays respond to input alarms and triggers. You can configure the alarm
outputs as N/O or N/C in the menu system. The relays are active for the duration of the driving
event. Connect the application to the alarm output relays (resistive loads only). Do not exceed 1A
30V DC, 0.3A 125V AC on an alarm output relay’s contacts. The contacts must not be used at AC line
voltages.
ALARM I/O - 25-pole D-type socket
F01U | 2.0 | 2008.12
Signal name
Pin no.
Description
Alarm_in_1
1
Alarm input 1
Alarm_in_2
2
Alarm input 2
Alarm_in_3
3
Alarm input 3
Alarm_in_4
4
Alarm input 4
Alarm_in_5
5
Alarm input 5
Alarm_in_6
6
Alarm input 6
Alarm_in_7
7
Alarm input 7
Alarm_in_8
8
Alarm input 8
Alarm_in_9
9
Alarm input 9
Alarm_in_10
10
Alarm input 10
User Manual
Bosch Security Systems
Digital Video Recorder
Connections and settings | en
Alarm_in_11
11
Alarm input 11
Alarm_in_12
12
Alarm input 12
Alarm_in_13
13
Alarm input 13
Alarm_in_14
14
Alarm input 14
Alarm_in_15
15
Alarm input 15
Alarm_in_16
16
Alarm input 16
Relay1_A
17
Relay 1 output pole 1
Relay2_A
18
Relay 2 output pole 1
Relay3_A
19
Relay 3 output pole 1
Relay4_A
20
Relay 4 output pole 1
Relay5_A
21
Relay 5 output pole 1
Relay6_A
22
Relay 6 output pole 1
Relay7_A
23
Relay 7 output pole 1
Relay8_A
24
Relay 8 output pole 1
System Ground
25
Chassis Ground
23
Table 3.3 Alarm I/O pin configuration
3.11
System operation
Default monitor setting is VGA.
1.
Turn on the unit. System booting will commence. The BOSCH logo image will be displayed on
the main monitor during the system booting.
2.
When booting is complete, the login window will be displayed.
Select a user ID by using the mouse or arrow, then the ENTER button on the remote control or
front panel.
Figure 3.5 Login window
-
ADMINISTRATOR: Unlimited operation of the unit.
-
Advanced User: Use of the limited functions of the system (the setup configuration is not
allowed to change).
-
Normal User: Use of the limited functions of the system (multiscreen monitor and live
image view are available).
3.
Enter the password by using the virtual keyboard. (Initial password is “000000”.)
4.
Press LOCK or click the OK (LOCK) icon.
You can see the live screen and operate the system.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
24
en | Connections and settings
Digital Video Recorder
•
It is not possible to connect the VGA monitor and the composite monitor simultaneously.
Consequently, the user is obliged to choose either the composite monitor or the VGA monitor.
When set to composite monitor there is no VGA output. When set to VGA monitor there is no
composite output. Monitor B is unaffected by the monitor setting.
•
This DVR is based on a VGA monitor using OSD. We recommend using the VGA monitor with
this unit. If you use a composite monitor, the OSD quality may lower to read it.
•
User access rights:
User Level
Administrator
Advanced User
Normal User
View Live Video
YES
YES
YES
Alarm Off
YES
YES
NO
PTZ
YES
YES
NO
Instant Record
YES
YES
NO
Export
YES
YES
NO
Search/Play
YES
YES
NO
Setup
YES
NO
NO
Table 3.4 User access rights
3.12
Selecting the main monitor type
You can select the main monitor type to display the main screen during power on.
3.12.1
Using the VGA monitor
1.
Connect the VGA monitor to the VGA connector on the back of the DVR.
2.
Turn on the VGA monitor.
3.
Press and hold the A (
) button on the front panel until the beep sounds to display the
main screen. The DVR will restart and then the VGA monitor is set as a main monitor.
Figure 3.6 The A button on the front panel
3.12.2
CCTV (composite video type) monitor
1.
Connect the CCTV monitor to the MON A connector on the back of the DVR.
2.
Turn on the CCTV monitor.
3.
Press and hold the B (
) button on the front panel until the beep sounds to display the
main screen. The DVR will restart and the CCTV monitor is then set as main monitor.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
Connections and settings | en
25
Figure 3.7 The B button on the front panel
Note:
You can select the monitor type by using the A (
) or B (
) button
at any time. If you change the monitor type, the system will be rebooted
automatically.
3.13
General explanation of the live screen on the main monitor
Main monitor screen
ab
c
d
e
f
g
Figure 3.8 Main monitor screen
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
26
en | Connections and settings
Digital Video Recorder
a
Channel Number: Displays the channel number.
b
Camera Name: Displays the edited camera name.
c
Recording status icon: Displays the recording status.
•
Red “Dot icon” indicates Instant recording.
•
Yellow “Running man icon” indicates motion detection recording.
•
Red “Alarm bell icon” indicates input triggered recording.
d
Selected Channel: Displays the selected channel with yellow box.
e
System Control Bar
•
: Displays the setup menu.
•
: Displays the search menu.
•
: Displays the PTZ remote control window.
•
: Displays the lock menu to change the user type or disable system operation.
•
: Displays the system log list window.
•
: Displays the system information window.
•
: Turns the alarm off.
•
: Displays the screen division selection window for the monitor A.
•
: Displays the screen division selection window for the monitor B.
•
: Click at a desired point to be marked during playback. Up to 15 points can be
marked.
: Display copy (export) menu.
•
:Displays the remaining HDD status.
•
•
•
N (Normal partition): Used size/total size.
E (Event partition): Used size/total size.
: Pause playback.
: Select the required scanning speed.
•
: Starts instant playback in selected channel.
•
: Stop playback.
f
Live Screen: Displays the current surveillance live screen.
g
Displays the current date and time.
Note:
Click the right button on the mouse to display / remove the system control
bar displayed on-screen.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
Connections and settings | en
3.14
Selecting live screen mode
3.14.1
Monitor A
27
You can select the live screen mode to display a full, 4-view, 6-view, 8-view, 9-view or 16-view
screens on the main monitor.
1.
Press A (
) button or click the
icon in the system control bar.
The screen mode select menu of monitor A is displayed on the monitor A.
2.
Select screen mode.
a
b
c
d
e
Figure 3.9 The screen mode select menu of monitor A.
a Selected channel of the monitor A.
b Channel buttons: Press the 1 to 16 channel button to see the current camera images in
selected live screens on the monitor A.
c Screen mode
• Full Screen Mode: When you see the selected channel on the full screen.
• 4, 6, 8, 9 and 16 view Mode: Displays selected multi screens on the monitor A.
d Selected view mode.
e Sequence: Views the all channels in sequence.
3.
Select [OK (A)] and press ENTER to confirm your selection.
Note:
To display the screen you desire to watch in full screen mode, double click
the desired channel.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
28
en | Connections and settings
3.14.2
Digital Video Recorder
Monitor B
You can select the live screen mode to full or 4-view screens on the monitor B.
1.
Press B (
) button or click the
icon in the system control bar.
The screen mode select menu of monitor B is displayed on the monitor A.
2.
Select screen mode.
a
b
c d
e
Figure 3.10 The screen mode select menu of monitor B.
a Selected channel of the monitor B.
b Channel buttons: Press a 1 to 16 channel button to see the current camera image on the
monitor B.
c Screen mode
• Full Screen Mode: When you see the selected channel on the full screen.
• 4 view Mode: Displays 4 view screens on the monitor B.
d Selected view mode.
e Sequence: View all channels in sequence.
3.
Select [OK (B)] and press ENTER to confirm your selection.
Note:
On Monitor B output always the channel number (CH01 ... CH16) is
displayed. Camera name can only be displayed on Monitor A output.
3.15
PTZ camera control
You can control the cameras connected via the biphase port and data port RS-422/485 terminal. You
must set the configuration between the PTZ camera and the DVR.
1.
Select the PTZ camera channel on monitor A you want to control.
2.
Press PTZ or click the PTZ icon in the system control bar.
PTZ virtual remote control is displayed on monitor A.
3.
Use each item to control the PTZ camera.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
Connections and settings | en
29
a
b
c
d
e
f
g
h
m
i
n
j
o
k
l
Figure 3.11 The PTZ virtual remote control.
Button
a
Remove the PTZ virtual remote control.
b
Use to pan/tilt the camera.
c
Confirm the preset position.
d
Adjust the camera zoom.
e
Manually adjust the focus of a camera.
f
Manually adjust the iris of a camera.
g
Displays the Selected Preset Number
h
Input the preset number.
i
Delete a memorized preset position.
j
Start a preset tour.
k
Sends the Aux OFF command. (Used only for
BOSCH Auto Dome camera).
Display the setup menu of the PTZ camera.
(Except BOSCH PTZ camera).
l
Bosch Security Systems
Function
User Manual
F01U | 2.0 | 2008.12
30
en | Connections and settings
Digital Video Recorder
m
Register preset positions.
n
Move the camera to the preset position.
o
Sends the Aux ON command. (Used only for
BOSCH Auto Dome camera).
Table 3.5 The PTZ virtual remote control button function table
3.15.1
Preset settings
Preset position is the function to program camera monitoring positions (preset positions) associated
with position numbers.
By entering the position numbers, you can move cameras to the preset positions.
Note:
To activate this function, you need to register the preset positions of the
PTZ camera.
3.15.2
To program preset positions
1.
Move the camera to a point you wish by using the v/V/b/B.
2.
Press SET or click the [SET] icon.
3.
Select the preset number you wish to register.
4.
Press ENTER or click the
icon.
The position and its number are memorized.
5.
Repeat steps 1-4 to add additional positions.
Note:
Preset numbers from 0 to 255 are available on this unit but the actual
preset range differs depending on PTZ cameras.
3.15.3
Changing to a preset position
The following function is available only with cameras provided with the preset function. The preset
function makes the PTZ camera move to the programmed preset position. It is necessary to program
preset positions for the PTZ camera beforehand.
1.
Press the MOVE button or click the [MOVE] icon.
2.
Use number buttons to enter the memorized preset position’s index number then press ENTER
or click the
icon. The camera moves to the preset position and the picture of the camera
in that position appears on the monitor.
3.15.4
To clear the preset position
You can clear a memorized preset position.
1.
Press the CLEAR button or Click the [CLEAR] icon.
2.
Use number buttons to enter the memorized preset index number, then press ENTER or Click
the
F01U | 2.0 | 2008.12
icon to clear the preset positions.
User Manual
Bosch Security Systems
Digital Video Recorder
Connections and settings | en
31
Note:
This function may not be available depending on PTZ cameras.
3.15.5
To tour the preset positions
You can tour all preset positions.
3.15.6
1.
Press the TOUR button or Click the [TOUR] icon.
All registered preset positions in the camera will be selected. The camera position image will
be switched on the active monitor.
2.
You can stop the tour by pressing the TOUR button or clicking the [TOUR] icon.
Setup for PTZ cameras
You can adapt the camera to your requirements by setting up the respective items in menus.
1.
Click the [SETUP] icon.
The setup menu appears in the selected window of the main monitor.
2.
Use arrows, ZOOM +/- and ENTER buttons to set the options.
Notes:
•
•
•
•
3.15.7
Refer to the manuals of the PTZ camera for more details.
Some PTZ cameras may not operate correctly with this unit.
You cannot control the other functions when the PTZ virtual remote control is displayed.
If you use the BOSCH PTZ camera that use the Bosch protocol, the
SETUP icon is not displayed on the PTZ virtual remote control.
To send the Aux On/Off commnd
1.
Click the [ON] or [OFF] icon.
2.
Enter the Aux command number of the BOSCH Auto Dome camera.
3.
Click the
Bosch Security Systems
icon to send the Aux commend.
User Manual
F01U | 2.0 | 2008.12
32
3.16
en | Connections and settings
Digital Video Recorder
Viewing System Information
To view system information:
1.
Press INFO or click the INFO icon in the system control bar. The system information window is
displayed on the main monitor.
Figure 3.12 System information window
2.
3.17
Press INFO or click the [Exit(Info)]button to exit the window.
Viewing the System Log List
To view the system log list:
1.
Press LOG or click the LOG icon in the system control bar. The system log list window is
displayed on the main monitor.
Figure 3.13 System log window
2.
F01U | 2.0 | 2008.12
Use b / B to see the previous or next log list.
User Manual
Bosch Security Systems
Digital Video Recorder
3.
Connections and settings | en
33
Press LOG or click the [Exit(LOG)]button to exit the window.
• The system log list:
No.
Log Message
No.
Log Message
1
Power On
24
Export Failed
2
Power Off
25
S/W Updated
3
Power Recovery
26
HDD Added (HDD1)
4
Admin Login (Remote)
27
HDD Added (HDD2)
5
Admin Logout (Remote)
28
HDD Added (HDD3)
6
Advanced User Login (Remote)
29
HDD Added (HDD4)
7
Advanced User Logout (Remote)
30
HDD Removed (HDD1)
8
Normal User Login (Remote)
31
HDD Removed (HDD2)
9
Normal User Logout (Remote)
32
HDD Removed (HDD3)
10
Admin Login (Local)
33
HDD Removed (HDD4)
11
Admin Logout (Local)
34
HDD Formatted (HDD1)
12
Advanced User Login (Local)
35
HDD Formatted (HDD2)
13
Advanced User Logout (Local)
36
HDD Formatted (HDD3)
14
Normal User Login (Local)
37
HDD Formatted (HDD4)
15
Normal User Logout (Local)
38
HDD Changed (HDD1)
16
Configuration Changed
39
HDD Changed (HDD2)
17
Configuration Imported
40
HDD Changed (HDD3)
18
Factory Default Set
41
HDD Changed (HDD4)
19
Backup Started
42
HDD Damaged (HDD1)
20
Backup Finished
43
HDD Damaged (HDD2)
21
Backup Failed
44
HDD Damaged (HDD3)
22
Export Started
45
HDD Damaged (HDD4)
23
Export Finished
46
System Fan Failure
Table 3.6 System log list
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
34
3.18
en | Connections and settings
Digital Video Recorder
Configuration Menu
The features and options of the DVR are configured through the menu. The operations of this
unit can be set via a menu displayed on the main monitor. You can select and set the operational
conditions by using the buttons on the front panel, the remote control, or using a USB Mouse
connected to the unit.
Only administrator-level users have permission to access the Setup menu and configure the DVR.
a
bc
d
e
f
Figure 3.14 DVR setup menu
a
Displays the selected main menu title.
b
Displays the main menu icons.
c
Displays the submenu options.
d
Displays the help menu.
e
Displays the selected submenu title.
f
Displays the detail options for selected submenu.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
3.18.1
Connections and settings | en
35
Using a mouse to set a menu
Use the left and right mouse buttons to set the menu.
3.18.2
•
Left button: Use to select a required item or decrease the options value.
•
Right button: Use to increase the options value.
1.
icon on the bottom of the on-screen display with the left mouse button to
Click the
display a setup menu.
2.
Click the desired menu icon with the left mouse button to display the submenu.
3.
Click the desired submenu item with the left mouse button.
4.
Set the selected options value.
5.
Click the Exit icon to exit setup menu. If the save message appears, click [OK] with the left
mouse button to save the settings.
Setting the menu using the front panel buttons or remote control buttons
•
Arrow Buttons (v/V/b/B): Use these buttons to select the menu options or adjust the
options value.
•
ENTER: Select the option or confirm the setting.
•
ESC: Return to the previous menu or level.
1.
Press SETUP(
2.
Use b/B to select the desired menu icon.
3.
Use v/V to select the desired submenu item, then press ENTER to display the setting options.
4.
Use v/V/b/B to select the desired option, then press ENTER to set the value.
5.
Use b/B to select the desired setting then press ENTER to confirm your selection.
6.
Press ESC to exit the Setup menu. If the Save message appears, press ENTER to save the
settings.
) to display the setup menu.
Note:
When you operate the function menu by using the remote control and front
panel buttons, both buttons are operated in the same way to control the
function menu.
To use other functions of number buttons on the front panel as shown below:
1.
Press ALT. The button indicator turns green.
2.
Select the function button you want.
All the operation explanations are based on using the remote control.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
36
en | Connections and settings
3.19
Camera settings
3.19.1
Camera
Digital Video Recorder
The camera name, covert and input audio channel settings are configured.
Figure 3.15 Camera setup menu
•
Ch: Displays the channel number.
•
Name: Enter the camera name using up to 12 characters.
- b/B/v/V: Select a character.
- ENTER: Confirms your selection.
- ESC: Exits the virtual keyboard menu.
•
Covert: You can set the camera conditions to prevent operation by other users.
•
Audio: You can hear from the selected input audio channel.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
3.19.2
Connections and settings | en
37
Video adjustment
Adjust the brightness, contrast and color settings of each camera channel. You can see the settings
screen from the preview windows.
Figure 3.16 Video adjustment setup menu
•
Channel: Selects the desired channel to adjust.
•
Brightness: Adjust the brightness value from 00 to 100 for the selected channel.
•
Contrast: Adjust the contrast value from 00 to 100 for the selected channel.
•
Color: Adjust the color value from 00 to 100 for the selected channel.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
38
en | Connections and settings
3.19.3
Digital Video Recorder
PTZ
Settings for the PTZ cameras connected via the data port of the biphase connecter or RS-422/485
terminal.
Figure 3.17 PTZ setup menu.
•
Camera: Selects the desired camera to set the connected PTZ camera.
•
COM port: Selects the connected data port of the biphase connecter, or RS-422/485 terminal
on the rear panel.
•
Control ID: Selects the PTZ camera ID from 00 to 255. Make the same settings as the PTZ
camera.
•
Protocol: Selects the protocol supported by PTZ camera.
•
Baud rate: Selects the communication speed (1200, 2400,4800,9600,19200 or 38400).
•
PTZ test: After the PTZ setting, you can test the pan/tilt function for the selected PTZ camera.
You can see the test screen from the preview windows on the right side of the PTZ test option.
- b/B: Test the pan direction.
- v/V: Test the tilt direction.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
3.19.4
Connections and settings | en
39
Continuous recording
Settings concerning continues recording.
Figure 3.18 Continuous recording setup menu
•
Ch: Displays the channel number.
•
Resolution: Selects the recording resolution.
•
Quality: Selects the recording picture quality (Lowest, Low, Normal, High or Best).
•
Frame rate: Selects the frame rate. The frame rate is the number of recorded frames per
second. According to resolution, the frame rate is set automatically. If you wish to set
manually, refer to the below table.
Resolution
NTSC
PAL
Frame rate
352*240
1, 3, 5, 7.5, 15, 20, 30
704*240
1, 3, 5, 7.5, 15
704*480
1, 3, 5, 7.5
352*288
1, 3, 5, 6, 12.5, 20, 25
704*288
1, 3, 5, 6, 12.5
704*576
1, 3, 5, 6
Table 3.7 Frame rate table
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
40
en | Connections and settings
3.19.5
Digital Video Recorder
Instant recording
Settings concerning instant recording.
Figure 3.19 Instant recording setup menu
•
Ch: Displays the channel number.
•
Resolution: Selects the recording resolution.
•
Quality: Selects the recording picture quality (Lowest, Low, Normal, High or Best).
•
Frame rate: Selects the frame rate. The frame rate is the number of recorded frames per
second. According to resolution, the frame rate is set automatically. If you wish to set
manually, refer to the below table.
Resolution
NTSC
PAL
Frame rate
352*240
1, 3, 5, 7.5, 15, 20, 30
704*240
1, 3, 5, 7.5, 15
704*480
1, 3, 5, 7.5
352*288
1, 3, 5, 6, 12.5, 20, 25
704*288
1, 3, 5, 6, 12.5
704*576
1, 3, 5, 6
Table 3.8 Frame rate table
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
3.19.6
Connections and settings | en
41
Input recording
Settings concerning input recording.
Figure 3.20 Input recording setup menu
•
Ch: Displays the channel number.
•
Resolution: Selects the recording resolution.
•
Quality: Selects the recording picture quality (Lowest, Low, Normal, High or Best).
•
Frame rate: Selects the frame rate. The frame rate is the number of recorded frames per
second. According to resolution, the frame rate is set automatically. If you wish to set
manually, refer to the below table.
Resolution
NTSC
PAL
Frame rate
352*240
1, 3, 5, 7.5, 15, 20, 30
704*240
1, 3, 5, 7.5, 15
704*480
1, 3, 5, 7.5
352*288
1, 3, 5, 6, 12.5, 20, 25
704*288
1, 3, 5, 6, 12.5
704*576
1, 3, 5, 6
Table 3.9 Frame rate table
•
Pre-event: Specify the pre-event recording time that records the situation until the input has
been detected. (Off, 5, 10, 20, 30, 40, 50 sec or 1 min)
•
Post-event: Specify the post-event recording time that records the situation after the input has
been detected. (10, 20, 30, 40, 50 sec or 1, 2, 3, 5, 10 min)
Note:
Pre-event times given are only a rough guide. Actual times are dependent
upon resolution, quality, and frame rate settings, as well as the number of
channels selected for pre-event recording.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
42
en | Connections and settings
3.19.7
Digital Video Recorder
Motion recording
Settings concerning motion recording.
Figure 3.21 Motion recording setup menu
•
Ch: Displays the channel number.
•
Resolution: Selects the recording resolution.
•
Quality: Selects the recording picture quality (Lowest, Low, Normal, High or Best).
•
Frame rate: Selects the frame rate. The frame rate is the number of recorded frames per
second. According to resolution, the frame rate is set automatically. If you wish to set
manually, refer to the below table.
Resolution
NTSC
PAL
Frame rate
352*240
1, 3, 5, 7.5, 15, 20, 30
704*240
1, 3, 5, 7.5, 15
704*480
1, 3, 5, 7.5
352*288
1, 3, 5, 6, 12.5, 20, 25
704*288
1, 3, 5, 6, 12.5
704*576
1, 3, 5, 6
Table 3.10 Frame rate table
•
Pre-event: Specify the pre-event recording time that records the situation until motion has
been detected. (Off, 5, 10, 20, 30, 40, 50 sec or 1 min)
•
Post-event: Specify the post-event recording time that records the situation after motion has
been detected. (10, 20, 30, 40, 50 sec or 1, 2, 3, 5, 10 min)
Note:
Pre-event times given are only a rough guide. Actual times are dependent
upon resolution, quality, and frame rate settings, as well as the number of
channels selected for pre-event recording.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
3.19.8
Connections and settings | en
43
Video format
Selects the video format to NTSC or PAL according to your video system format.
1.
Select the video format.
The confirmation message is displayed.
2.
Select [OK] and press ENTER.
After the HDD has been formatted, the system will reboot.
Figure 3.22 Video format setup menu
3.20
Schedule settings
The DVR can record according to a schedule set by the user. It can also record manually regardless
of date and time. The recording can be made either continuously or triggered by events (input and
motion detection).
The recording schedule screen displays one day of the week showing the schedule of all channels
over a 24-hour period.
For each 1-hour cell block the recording method can be specified. The recording method for each
block is shown in color for easy viewing.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
44
en | Connections and settings
Digital Video Recorder
Figure 3.23 Schedule setup menu
3.20.1
To set the Recording Schedule for a typical day of the week
1.
Select a day of the week. (Sun, Mon, Tue, Wed, Thu, Fri or Sat)
2.
Select the desired channel to schedule recording.
3.
Select the time cell block for the start time.
Figure 3.24 Schedule setup menu
4.
F01U | 2.0 | 2008.12
Press ENTER or click the left mouse button to select a recording mode. The color of the cell
blocks will change automatically.
-
Gray: No scheduled recording
-
Blue (Continuous recording): Recording starts automatically from the preset time.
-
Red (Input event recording): Recording starts automatically when the input is activated
within a designated time.
-
Yellow (Motion event recording): Recording starts automatically when motion is detected
within a designated time.
User Manual
Bosch Security Systems
Digital Video Recorder
5.
Connections and settings | en
45
-
Green (Input+Motion recording): Recording starts automatically when the input is activated
or motion has been detected.
-
Blue+Red (Continuous+Input event recording): Recording starts automatically from the
preset time. When the input is activated within a designated time, change the continuous
recording mode to input event recording mode and recording starts automatically.
-
Blue+Yellow (Continuous+Motion event recording): Recording starts automatically from the
preset time. When the motion is detected within a designated time, change the continuous
recording mode to motion event recording mode and recording starts automatically.
-
Blue+Green (Continuous+Input+Motion event recording): Recording starts automatically
from the preset time. When the input is activated or motion has been detected, change
the continuous recording mode to motion event recording mode and recording starts
automatically.
Select the next time cell block of schedule time cell blocks to confirm the schedule time.
Figure 3.25 Schedule setup menu
6.
Press ENTER or click the left mouse button repeatedly to select gray to set the time for the
end of the schedule. The settings cell block is highlighted.
Figure 3.26 Schedule setup menu
7.
Press MENU to confirm your settings. The confirmation window is displayed.
8.
Select OK and press ENTER to save the new settings.
•
Bosch Security Systems
Press ESC to exit the specific date selection menu.
User Manual
F01U | 2.0 | 2008.12
46
en | Connections and settings
3.20.2
Digital Video Recorder
To set a recording schedule for an Exception days
In addition to the weekly schedule, up to 10 specific date/time periods can be defined. To configure
the specific recording schedule select Specific Dates.
1.
Select the [Exception days] option.
Figure 3.27 Exception days setup menu
2.
Select a cell block.
Figure 3.28 Exception days setup menu
3.
F01U | 2.0 | 2008.12
Press the SET button or click the
The specific date selection menu appears.
User Manual
icon on the exception days setting menu.
Bosch Security Systems
Digital Video Recorder
Connections and settings | en
47
Figure 3.29 Exception days setup menu
4.
5.
Enter the necessary information for year, month and date.
•
b/B/v/V: Press to move the columns, [OK] or [Cancel] buttons.
•
b/B (or left/right mouse button): Changes the value at the current position.
Use b/B/v/V to select [OK] button and press ENTER.
The virtual keyboard menu appears.
Figure 3.30 Exception days setup menu
6.
Enter the name of the exception day. Use v/V/b/B to select a character then press ENTER to
confirm your selection.
7.
Use v / V to select the [OK] icon then press ENTER to fix the date of the special day and
return to the special day menu screen.
8.
Select the schedule time and set the recording method for each channel.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
48
en | Connections and settings
3.20.3
Digital Video Recorder
Checking the Exception days schedule list
1.
Press INFO when the “Exception days” option is selected.
The exception days scheduled list appears.
Figure 3.31 Exception days scheduled list
2.
Select a exception day title on the list and press ENTER.
The title color turns orange.
3.
Select the [Edit] icon, press ENTER to edit the exception day or press CLEAR to delete the
exception day schedule.
4.
Press ESC to exit the exception day schedule list.
Note:
If the exception day recording schedule is duplicated with the other
recordings, only the exception day recording is possible.
3.20.4
Copying the recording schedule
Copying from the scheduled data of the channel
You can copy the schedule data of the channel to the other channel(s) within the selected day of the
week.
1.
Select the day of the week and press ENTER.
2.
Select channel that you want to copy.
3.
Press COPY then the channel selection menu appears.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
Connections and settings | en
49
Figure 3.32 Channel copy menu
4.
Use b/B to move to the left or right column then press ENTER to select the target channel(s).
You can cancel the selected channel by pressing ENTER.
5.
Use v/V to select [OK] then press ENTER to confirm your selection.
Copying from the Scheduled Data of the day
You can copy the scheduled day of the week to another day of the week, weekday and weekend
using the MARK button.
1.
Select the day of week that you want to copy.
2.
Press MARK then the select date(s) menu appears.
Figure 3.33 Day copy menu
3.
Use b/B to select the target date(s).
4.
Use v/V to select [OK] then press ENTER to confirm your selection.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
50
en | Connections and settings
3.21
Display settings
3.21.1
OSD
Digital Video Recorder
Figure 3.34 OSD setup menu
•
Language: Select a language for the setup menu and information display.
•
Camera name
•
F01U | 2.0 | 2008.12
-
On: Displays the title of the camera.
-
Off: Displays the live picture without the title of the camera.
Camera status
-
On: The current camera recording status is displayed.
-
Off: Remove the current camera recording status.
User Manual
Bosch Security Systems
Digital Video Recorder
3.21.2
Connections and settings | en
51
Monitor A
Figure 3.35 Monitor A setup menu
•
3.21.3
Seq. dwell time: You can set the camera sequence time to 2 sec, 5 sec, 10 sec, 20 sec, 30 sec,
40 sec, 50 sec, 60 sec, 70 sec, 80 sec or 90 sec.
Monitor B
Figure 3.36 Monitor B setup menu
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
52
en | Connections and settings
Digital Video Recorder
•
Seq. dwell time: You can set the camera sequence time to 2 sec, 5 sec, 10 sec, 20 sec, 30 sec,
40 sec, 50 sec, 60 sec, 70 sec, 80 sec or 90 sec.
•
Event popup: Displays an event popup on the monitor B if motion, input or all (motion or
input) occur.
3.22
Event settings
3.22.1
Input
Figure 3.37 Input setup menu
•
In: Displays the number of inputs.
•
Input type: The input state can be set to either N.O. (Normally Open) or N.C. (Normally
Closed).
•
Camera: Select the connected camera channel to the input.
•
Relay output: Select the relay output number for the selected input.
•
Preset: Select the preset number. When the input is activated, the camera moves to the
selected preset position and the picture of the camera in that position appears on the monitor.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
3.22.2
Connections and settings | en
53
Motion
Figure 3.38 Motion setup menu
•
Camera: Select the camera to set motion detection.
•
Sensitivity: Set the level of sensitivity for the created motion detection area. Sensitivity can be
set from level 01 to 10 or Off.
•
Relay output: Select the number of the output relay when motion is detected.
•
Area: Select the desired motion detection area on the preview window screen.
•
-
b / B / v / V: Moves the yellow cell box to another cell zone.
-
ENTER: Selects or cancels the motion detection area at the current cell position.
-
Press ESC to exit the settings.
You can select the motion detection area by using the mouse.
-
To select the area: Drag & drop a cell to the right to select the motion detection area.
-
To cancel area: Drag & drop a cell point of a selected cell area to the left to cancel the
motion detection area.
Note:
In situations where illumination is low and the outline of object is not clear
enough to see, regardless of sensitivity, Motion Event might not activate.
You must check Motion Event before setting.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
54
en | Connections and settings
3.22.3
Digital Video Recorder
Alarm acknowledgement
Figure 3.39 Alarm acknowledgement setup menu
•
F01U | 2.0 | 2008.12
Alarm ackn.
-
Manual: Use the ACK button on the remote control or
stop alarm.
-
Post-event time: The alarm is stopped after the programmed post-event time.
User Manual
button on the front panel to
Bosch Security Systems
Digital Video Recorder
Connections and settings | en
3.23
Network settings
3.23.1
TCP/IP
55
Figure 3.40 TCP/IP setup menu
•
DHCP: DHCP stands for Dynamic Host Configuration Protocol.
-
On: Network settings of this unit are configured automatically by the DHCP server.
If you set to ON, the [IP Address], [Subnet Mask], [Gateway], [Primary DNS] and
[Secondary DNS] options are dimmed and these options can not be set.
-
Off: Enter the network settings manually.
•
IP address: Enter an IP address using the virtual keyboard.
•
Subnet mask: Enter a subnet mask address using the virtual keyboard.
•
Gateway: Enter the gateway address using the virtual keyboard.
•
Primary DNS: Enter the Main DNS server address using the virtual keyboard.
•
Secondary DNS: Enter the Sub DNS server address using the virtual keyboard.
•
Remote client port no.: Enter the remote client port number using the virtual keyboard. You
can watch the live surveillance image over the network with the Control Center program. The
factory default port for transmission of video and audio data is 9001. However in some cases it
is better to change this port number for added flexibility or security. If desired change the port
number (1025 ~ 65535).
•
HTTP port no.: Enter the HTTP port number using the virtual keyboard. You can watch the live
surveillance image over the network with a web browser. Typically the TCP port used by HTTP
is 80. However in some cases it is better to change this port number for added flexibility or
security. If desired change the port number (80 or 1025~ 65535).
•
Bandwidth limit: Enter the Bandwidth to adjust the data traffic.
Note:
When you change the Remote client port or HTTP port number, all
connections with the Control Center programs or web browser will be
disconnected.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
56
en | Connections and settings
3.23.2
Digital Video Recorder
DDNS (Dynamic Domain Name System)
Figure 3.41 DDNS setup menu
•
User name: Enter the DDNS registered user name using the virtual keyboard.
•
Password: Enter the user password in [User name] using the virtual keyboard.
Note:
The DDNS function is serviced using a TCP 8245 port by “No-IP” (http://
www.no-ip.com/).
In case the DVR is used in the network system with a firewall, open the
TCP 8245 port so that DDNS data can get into firewall. For more detail
on firewall setup, ask your network administrator and/or network service
provider.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
3.23.3
Connections and settings | en
57
Notification
Figure 3.42 Notification setup menu
•
•
•
•
•
•
Alarm on:
-
On: Sends an e-mail when an input has been activated.
-
Off: Not used.
Motion detect:
-
On: Sends an e-mail when motion detection has been activated.
-
Off: Not used.
Disk full:
-
On: Sends an e-mail when the HDD has fully recorded.
-
Off: Not used.
Admin PW changed:
-
On: Sends an e-mail when the administrator password has changed.
-
Off: Not used.
Video loss:
-
On: Sends an e-mail when a video signal from the camera has stopped because of a cable
disconnection or malfunction of a camera.
-
Off: Not used.
Power on/off:
-
On: Sends an e-mail when power is on or off.
-
Off: Not used.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
58
en | Connections and settings
3.23.4
Digital Video Recorder
Mail
Figure 3.43 Mail setup menu
•
Notification
-
On: Notifies the user by e-mail of unit operating information, according to notification
settings.
-
Off: The notification function is not used.
The mail options are dimmed.
•
SMTP server: Enter the SMTP Server address using the virtual keyboard.
If notification is set to On and the SMTP server option is empty, the SMTP port no., user name,
and password options are dimmed and the options are not set.
•
SMTP port no.: Enter the SMTP port number using the virtual keyboard. Typically the port
used for SMTP is 25. However, in some cases it is better to change this port number for added
flexibility or security. If desired change the port number (1 ~ 65535).
•
User name: Enter the user name using the virtual keyboard.
•
Password: Enter the password using the virtual keyboard.
•
TLS: Set to On when using the TLS (Transport Layer Security) function. By default, TLS is Off.
•
Mail address (1-3): Enter the mail address using the virtual keyboard.
You can input up to 3 e-mail addresses.
•
E-mail test: Select [E-mail test] to test sending an e-mail.
Note:
The SMTP server, SMTP port no., user name or password settings are
optional. The DVR can send e-mail directly without the use of an SMTP
server or MTA (message transfer agent). In certain cases all e-mail should
be forwarded to a specific SMTP server. Specify the server host name or IP
address in such a case. For more detail on SMTP setup, ask your network
administrator and/or mail service provider.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
3.23.5
Connections and settings | en
59
Emergency
Figure 3.44 Emergency setup menu
•
•
Notification:
-
On: Notifies the Alarm notifier program about unit operating information according to your
notification settings.
-
Off: Notification function is not used.
IP address/Port no.: Enter the IP address/port number of the Alarm notifier program using the
virtual keyboard. The factory default port for this function is 9002. However, in some cases it is
better to change this port number for added flexibility or security. If desired, change the port
number (1025 ~ 65535). You can set up to 9 IP address/port numbers.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
60
en | Connections and settings
3.24
System settings
3.24.1
Date/Time
Digital Video Recorder
Figure 3.45 Date/Time setup menu
•
Date: Enter the current date.
•
Time: Enter the current time. (24 HR or 12 HR)
•
Date format: Select the date display format.
•
Time format: Select the time display format.
•
Time zone: Select your Time zone (for more details see "8.3 Time zones").
•
Daylight saving: Set to On to use the daylight saving function.
•
Daylight saving start: Select the Daylight saving start time.
•
Daylight saving end: Select the Daylight saving end time.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
3.24.2
Connections and settings | en
61
NTP
Figure 3.46 NTP setup menu
•
NTP: Set to On when using the NTP (Network Time Protocol) server for time adjustment. If the
NTP is set to Off, the time settings should be entered manually and the [Time server], [Private
time server], [Sync. interval] and [NTP test] options are deactivated.
•
Time server: For most cases select public. The DVR will obtain the average time among 5
public servers (time.nist.gov, time-a.nist.gov, time-b.nist.gov, ntp.nasa.gov, clock.isc.org).
•
Private time server: Enter the private time server’s IP address or host name using the virtual
keyboard.
•
Sync. interval: You can set synchronized intervals with the NTP time server to 1 day, 1 hour, 1
month and 1 week.
•
NTP test: Select [NTP test] to test the NTP server.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
62
en | Connections and settings
3.24.3
Digital Video Recorder
Beeper
Figure 3.47 Beeper setup menu
•
•
•
•
Button beeper
-
On: Makes a sound when using the buttons.
-
Off: Turns off the button beep.
Input beeper
-
On: Makes a sound when a input is activated.
-
Off: Turns off the input beeper.
Motion beeper
-
On: Makes a sound when a motion is detected.
-
Off: Turns off the motion beeper.
System beeper
-
On: Makes a sound when a cooling fan is not activated or the HDD has a bad sector.
-
Off: Turns off the system beeper.
Note:
The beeper is a low sound on this unit. If you want to make a loud sound,
connect an external alarming device to the output connecter (ext. siren).
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
3.24.4
Connections and settings | en
63
User
You can register a new user with various access rights to the DVR or Control Center.
Figure 3.48 User setup menu
•
No.: Displays the user number.
•
ID: Enter the new user ID using the virtual keyboard.
•
Level: Select the level of the new user.
•
Password: Enter or change the password for the user using the virtual keyboard. You can use
the password with number, special character or characters. (minimum length 4, maximum
length 8).
Note:
Remember the password. If you forget the password please contact an
authorized service center or the dealer you purchased the system.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
64
en | Connections and settings
3.24.5
Digital Video Recorder
Update
The update feature allows you to upgrade DVR software and add/upgrade PTZ protocols. In this
case, the current DVR settings are not deleted or replaced during the update process.
Figure 3.49 Update setup menu
1.
2.
3.
Select one of the following:
•
Select System firmware to upgrade DVR system software.
•
Select PTZ protocol to update the DVR protocols.
Choose the media from which to perform the update:
•
USB: Select USB, and then insert the USB drive into the DVR. All USB devices must be
disconnected before you can use the USB drive.
•
Network: Select Network, and then do the following:
a. Select the update server settings box. The virtual keyboard is displayed.
b. Enter the update server IP address. The DVR network settings must be configured and
you must know the update server’s IP address.
Select Update to start the update process.
4.
Select OK to begin the update process or click Cancel to stop and exit. After the update
process is completed, the system displays the Restart the system dialog box.
5.
Click OK to restart the DVR.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
3.24.6
Connections and settings | en
65
Configuration
Figure 3.50 Configuration setup menu
•
Import configuration: Import the DVRs configuration data from the USB memory stick.
•
Export configuration: Export the configuration data from this DVR to the USB memory stick.
•
Factory defaults: You can reset the DVR to its original factory settings. Some options cannot
be reset (Video format, Date, Time, Time zone, Daylight saving, Daylight saving start, Daylight
saving end, User settings, Event partition settings).
Notes:
•
•
Bosch Security Systems
Configuration data import is available when the configuration data of a
DVR is the same kind as this unit’s data.
If you use a USB memory stick for configuration export, you must disconnect the other external USB devices.
User Manual
F01U | 2.0 | 2008.12
66
en | Connections and settings
3.24.7
Digital Video Recorder
Hard disk
Figure 3.51 Hard disk setup menu
•
Overwrite:
-
All: Overwrite recording is possible when the normal partition and event partition of HDD
have fully recorded.
-
Normal partition: Overwrite recording is possible for normal partition of HDD when the
normal partition of HDD has fully recorded.
-
Event partition: Overwrite recording is possible for event partition of HDD when the event
partition of HDD has fully recorded.
-
Off: Do not use overwriting.
•
Disk full warning: When the HDD has overflowed a warning message is displayed.
•
Event partition: Set the space of event partition for event recording.
•
Auto delete: Set the auto delete date (Off, 1 day, 2 days, 5 days, 7 days, 10 days, 20 days, 30
days, 40 days, 50 days or 60 days). If you set the auto delete date, the recorded data will be
deleted except the data within the selected date period of time. The Auto delete function is
activated every 35 minutes.
•
Format: Initializes the HDD (Hard Disk Drive). All data on the selected HDD will be erased.
To format HDD(s) enter YES (all capitals) for all language settings.
Notes:
If you change the value of event partition, the current recorded data of
HDD is deleted and the partition is reset. The partitions will be formatted
automatically and the system will be restarted.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
3.24.8
Connections and settings | en
67
Backup
Figure 3.52 Backup setup menu
•
Partition selection: Select a backup partition.
•
Schedule: You can set the backup schedule.
-
Off: All options are disabled.
-
Instant: The backup data is saved manually.
-
Weekly or daily: The backup data will be automatically saved according to the setting.
•
Device: Select a backup device.
•
Schedule start: Set the schedule start date (a day of the week and time).
•
Time range date: Enter the backup time range. Enter the date you want to backup.
•
Time range start: Enter the start day of the week or time.
•
Time range end: Enter the end day of the week or time.
•
Estimate size: Displays the size of backup data and the free space of external devices.
•
Start backup: To start backup.
•
Erase media: To erase the media.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
68
en | Connections and settings
Digital Video Recorder
Notes:
•
•
•
•
•
•
•
•
•
The backup function is not supported on the external USB CD-ROM
drive.
Backup to external USB HDD is supported with maximum 250 GB.
Use the recommended external USB devices for preventing malfunction
(See “8.2.1 Supported USB memory list”).
The CD-R, DVD-R or DVD+R discs cannot be formatted.
An external media has to be formatted on this unit to prevent malfunction.
DVD+RW and DVD-RW discs have to be initialized before using.
You cannot use the [Estimate size], [Start backup] and [Erase media]
options in backup progressing.
Do not remove the USB device while the backup is in progress, it may
cause a malfunction. If you reuse the removed device, you must format
the media by using Erase media options.
If you format the external media by using a PC with FAT32, the media
may not be used on this unit.
Instant Backup
1.
Connect the backup USB device or insert a recordable disk to the disc driver for backup.
2.
Select the partition you want to backup.
3.
Select INSTANT from the schedule options.
4.
Select the backup device.
5.
Select the Time range date, Time range start time, and Time range end time for backup.
6.
Select the [Estimate size] icon and press ENTER.
7.
Check the size of the selected data and free space. If the device does not have enough space,
create space on the device or erase the previously stored data.
8.
Select the [Start backup] icon and press ENTER to start backup.
9.
Exit the setup menu.
You can check the backup status on the system control bar in backup progress.
Note:
You cannot stop the backup while in progress.
•
The warning message will appear for the conditions listed below.
-
When the start time and end time are the same value.
-
When the start time is later than the end time.
-
A media does not have enough space.
-
When you set the time for data that does not exist.
•
The disc burning is carried out by a single session closed format.
•
If you use the CD/DVD writer device for backup,the backup status will be displayed as shown
below.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
Connections and settings | en
69
- 1st. Status of making ISO image
- 2nd. Status of writing
Daily/Weekly backup
1.
Connect the USB device for backup.
You cannot use the CD or DVD writer for daily or weekly backup.
2.
Select Weekly or Daily on the schedule options.
3.
Select the backup device.
4.
Enter the date and/or time to start backup on the schedule start option.
5.
Enter the day of week and/or time on the Time Range Start option.
6.
Enter the day of week and/or time on the Time Range End option.
7.
Select [Estimation size] icon and press ENTER.
8.
Check the size of selected data and free space of USB device. If the USB device does not have
enough space, change the USB device of enough space or erase the connected USB device.
Note:
You cannot stop the backup while in progress.
•
The warning message will appear for the conditions listed below.
-
When the start time and end time setting are wrong.
-
A media does not have enough space.
-
When you set the time for data that does not exist.
-
When the selected USB device is disconnected.
•
The estimated size of backup data is only the approximate size. Be sure to allocate sufficient
space on the media to accommodate the backup task.
•
You can check the backup status on the system control bar.
•
The scheduled backup will not start if there is an export or a search of the external USB device
in progress. After the export or backup search is finished, scheduled backup will be restarted.
•
When you set the schedule backup, the backup data size is estimated from the recording
settings of the Setup menu. If the actual recorded data size is larger than the estimated
recording data size, the schedule backup may not be activated.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
70
en | Connections and settings
3.24.9
Digital Video Recorder
System
Figure 3.53 System setup menu
•
IR remote controller: Select the IR remote ID for this unit (01~09). If you use multi systems set
the IR remote ID for each DVR unit.
•
DVR ID: Select the DVR ID for this unit (01~16). If you use multi systems set the DVR ID for
each DVR unit.
•
Auto user logout: Logout is automatical at fixed intervals. You can set auto logout time to 5
min, 10 min, 30 min, 60 min or Off.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
4
Recording | en
71
Recording
Images from a camera will be recorded on the built-in hard disk.
Note:
External recording devices can be used as copy areas for images recorded
on the hard disk. It is impossible to record images on the external recording
devices directly.
4.1
Instant Recording
Ensure all the cameras are connected and that time and date have been set correctly.
Before you start recording, first SETUP the recording settings in the instant recording menu of the
system setup.
1.
Select the desired channel for instant recording.
2.
Press the REC button on the remote control or press
button on the front panel to start
record.
The red dot is blinking on the selected channel screen of the main monitor.
Figure 4.1 Rec buttons
3.
Press the REC button on the remote control or press
button on the front panel to
stop recording. If you stop instant recording, the recording mode will be changed into the
scheduled recording mode and the red dot disappears.
Figure 4.2 Selected channel screen of the main monitor, showing the red dot.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
72
en | Recording
Digital Video Recorder
Notes:
•
•
•
•
F01U | 2.0 | 2008.12
You can not record the Instant and Continuous recording under the following conditions.
- A HDD is not formatted.
- The channel has no video input for display.
- Overwrite is set to “Off” or “Event Partition”, and normal partition is
full.
- On the HDD setting, the event partition is set to 100%.
You can not record the Input and Motion recording under the following
conditions.
- A HDD is not formatted.
- The channel has no video input for display.
- Overwrite is set to “Off” or “Normal Partition”, and event partition is
full.
- On the HDD setting, the event partition is set to 0%.
- The schedule (Input/Motion) record is not set.
HDD partition according to a recording type.
- Normal Partition: It is the space in the HDD that stores the continuous and instant recorded data. Once the normal partition is set to
0% (the event partition is 100%), you can not record the continuous
or instant recordings.
- Event Partition: It is the space on the HDD that stores input and
motion recorded data. Once the event partition is set to 0%, you can
not record the alarm and motion recording.
Priority of record.
Instant record > Input record > Motion record > Continuous record.
User Manual
Bosch Security Systems
Digital Video Recorder
Search and playback | en
5
Search and playback
5.1
Playback
73
It is possible to play a recorded image without stopping recording.
1.
Select a channel you want to playback.
2.
Press bB to play a recorded image of the previous 2 minutes of recording.
The playback image will be displayed on the selected channel window.
Figure 5.1 Playback window
3.
Press x (STOP) to stop the playback.
Note:
The playback window is fixed and only in selected channel.
5.2
Search
The various search functions of this unit can be used to go to the beginning of the desired picture.
This unit is equipped with 4 search functions.
5.2.1
Select source device
This item is used to set the playback or search device.
1.
Press SEARCH button, the search menu is displayed.
2.
Press ESC to move to the Title menu tab.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
74
en | Search and playback
Digital Video Recorder
Figure 5.2 Search menu tab
3.
Use b/B to select [INTERNAL HDD] then press ENTER.
Figure 5.3 Source device select menu
4.
5.
Use b/B to select the desired source device.
•
INTERNAL HDD: Plays back or searches recorded contents of the internal HDD device.
•
Source device: Plays back or searches backup contents of the source device.
Press ENTER to confirm your selection.
Notes:
•
•
5.2.2
While the backup is in progress, you can not search the data on the
backup device.
Do not remove the external USB device while the backup search is in
progress from the USB device. It may cause a malfunction.
Date/time search
Use to search recorded pictures by specifying date, hour and minute.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
Search and playback | en
75
Figure 5.4 Date/time search menu
1.
Select the [Date/time search] menu.
2.
Use v/V/b/B to select the year, month, date, hour or minute column, then press ENTER.
3.
Use b/B to input the date or time.
4.
Press ENTER to confirm it.
5.
Select the [Update] icon then press ENTER.
The search result is displayed in the time table of the search menu.
6.
Use the channel buttons on the front panel to select the channel(s) you want to play back.
7.
Press bB or Click the [Play (B)] icon to start playback.
The picture(s) is (are) displayed in the main monitor.
Figure 5.5 Playback showing system control bar
8.
Press STOP (x) to stop playback and return to the search menu.
9.
Press SEARCH or ESC to exit the menu.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
76
en | Search and playback
Digital Video Recorder
Notes:
•
•
5.2.3
Recorded data shown on the time graph will be displayed in different
colors depending on the recording type.
- Blue: Continuous/Instant recording.
- Red: Input recording.
- Yellow: Motion-detection recording.
- Gray: No recording.
Use the ZOOM + button to view the detailed time by 6 hour intervals.
Event Search
Search a recorded picture by date and type of event.
Figure 5.6 Event search menu
1.
Select the [Event Search] menu.
2.
Set the year, month, day and time.
- v/V/b/B: Moves to the previous or next column or changes the setting at the current
position.
- ENTER: Selects the column or confirms the setting.
3.
Select the channel for event search using ENTER.
4.
Use v/V/b/B to select the [Event type] then press ENTER.
5.
Select the [Search] icon then press ENTER.
The event list menu appears.
Figure 5.7 Event list
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
5.2.4
Search and playback | en
77
6.
Select the recording data on the event list then press bB, click [Play (B)] or double click the
selected data to start playback.
The picture is displayed on the monitor A.
7.
Press STOP (x) to stop playback and return to the event list menu.
8.
Press ESC repeatedly to exit the event search menu.
Smart Search
Pictures recorded via motion detection can be searched by specifying the motion detection
conditions.
Figure 5.8 Smart search menu
1.
Select the [Smart search] menu.
2.
Set the channel number, start time, end time and sensitivity options.
- b/B/v/V: Moves to the options or sets the selected option.
- ENTER: Selects option or confirms the setting.
Note:
The time between the start time and the end time is automatically
set at 1hour.
3.
Select the [Set] in the [Area] option, then press ENTER.
The picture from the selected camera is displayed.
4.
Set the motion mask setting.
The area switches between active and inactive each time you press ENTER.
Click the one point and drag & drop the end point, to the right, to select the motion using the
mouse. Click the one point and drag & drop the end point, to the left, to unselect the motion
using the mouse.
The active areas are indicated in red.
5.
Press ESC to exit the mask setting.
6.
Select [Search] then press ENTER.
The motion detect list menu is displayed.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
78
en | Search and playback
Digital Video Recorder
Figure 5.9 Motion detect list
5.2.5
7.
Select the recording data on the motion detect list then press bB, click [Play (B)] or double
click the selected data to start playback.
The picture is displayed in the main monitor.
8.
Press STOP (x) to the stop playback and return to motion detect list menu.
9.
Press ESC repeatedly to exit the smart search menu.
Bookmark Search
Search the desired picture with a bookmark registered by the bookmark function.
1.
Select [Bookmark Search] menu.
Figure 5.10 Bookmark search menu
2.
Select the recording data on the list then press bB, click [Play (B)] or double click the
selected data to start playback.
The picture is displayed in the main monitor.
3.
Press STOP (x) to stop playback and return to the bookmark list menu.
4.
Press ESC to exit the bookmark search menu.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
Search and playback | en
79
Notes:
•
•
•
•
5.3
If you want to delete the bookmark on the list, press the CLEAR button.
Backup data can not be played back by a bookmark search.
You can register a bookmark only in the single channel playback.
You can not register a bookmark during instant playback
Functions available during playback
Button
System
Control Bar
Remote
Control
Function
Front panel
Stop playback.
Pause playback.
Press repeatedly to select the required
scan speed. (M, MB, MM, MMB
or m, mb, mm, mmb)
Press repeatedly to play frame-by-frame in
pause mode.
Press to play reverse or normal playback.
+
Press MARK at a desired point to be
marked during playback. Up to 15 points
can be marked.
Notes:
•
•
•
Bosch Security Systems
You can play back the backup or export data in normal speed only.
If you use the reverse frame skip function, a frame may be skipped.
Multi channel play works only in the date/time search function.
User Manual
F01U | 2.0 | 2008.12
80
5.4
en | Search and playback
Digital Video Recorder
EXPORT
This unit can manually copy recorded images and audio from built-in HDD to the external recording
devices.
1.
Press COPY or click
.
The export menu window appears.
Figure 5.11 Export menu window
2.
Select a target device to export.
3.
Select the channel number(s).
4.
Set the start date/time and end date/time to copy.
5.
icon to start exporting.
Press COPY or Click
The exported data will be authorized by the unit before saving and it can only be played back
with the Archive player.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
Search and playback | en
81
Notes:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Bosch Security Systems
You can also use the COPY button on the front panel for export function.
- DVR-16K/DVR-16L: Press ALT and then COPY button.
- DVR-8K/DVR-8L: Press COPY button only.
You can export the recorded data only in the live mode.
If you use the external USB memory device, the external USB memory
device has to be formatted on this unit. To format the USB memory
device on the unit, refer to 3.24.8 Backup. In the backup menu you have
to select device to be formatted and press “Erase media”.
Check the export device before you proceed.
Export can not be executed while the backup is in progress.
You can view the exported data with the supplied Archive player software.
When you export the recorded data, the audio data will also be exported.
When you export the recorded data the Archive player program will also
be exported in the [ArchivePlayer] folder of the device. The exported data
file name is made automatically as the [Channel name_export date_export
time.exp] type.
Do not remove the USB device while the export is in progress, it may
cause a malfunction. If you reuse the removed device, you must format
the media by using erase media options.
The warning message appears for the conditions listed below.
- When the start date/time and end date/time are the same value.
- When the start date/time is later than the end date/time.
- The export media does not have enough space.
- When you set the time for data that does not exist.
An external media has to be formatted on this unit to prevent a malfunction.
DVD+RW and DVD-RW discs have to be initialized before using.
You can format the external media with the backup tab in the setup menu.
Export time is limited for 16 hours for 1 channel. For 2 channels is this 8
hours, 4 channels 4 hours and so on. If you want to archive 16 channels
simultaneously you have a limit of 1 hour. When attempting more than 16
hours, the message “Invalid export time range” is displayed.
You can export the customer log file to the USB device using the
[File(Log)] button. The customer log file name is [ExportLog-export date
and time-MAC Address.txt]. When you export the recorded data, the
export information is saved to the customer log file of the DVR’s flash
memory.
The customer log file contains the following information.
- DVR information.
- Start date and time when the operator made the export.
- Start date and time of the export clip.
- End date and time of the export clip.
- Destination on which media the operator saved the export (USB or
DVD/CD or IP [via network])
- Exported channel number(s)
- User ID that is logged on the system when an export was made.
User Manual
F01U | 2.0 | 2008.12
82
en | Search and playback
F01U | 2.0 | 2008.12
Digital Video Recorder
User Manual
Bosch Security Systems
Digital Video Recorder
6
Control Center | en
83
Control Center
Control Center is the network program of the DVR-8K/DVR-8L and DVR-16K/DVR-16L. This manual is
written based on DVR-16L (16 channels).
The description pictures may differ from your OS (Operating System) type. The pictures used in this
manual are based on Windows XP.
Note:
Do not use other applications with this Control Center program. This can
cause memory shortage and Client program malfunction.
6.1
PC minimum Requirements
x
OS (Operating System): Windows 2000 or above, DirectX 8.1 or above.
x
CPU: Intel Pentium III or above, AMD Athlon with 800 MHz or above.
x
RAM: 512 MB or above.
x
Graphics Card: AGP VGA with 64 MB Video RAM or above.
Recommended PC Requirements
•
•
•
•
6.2
OS: Windows XP
CPU: Intel Pentium IV
RAM: 512 MB
Graphics Card: AGP VGA with 128 MB Video RAM
Control Center installation
1.
Insert the Divar MR PC software CD which will be started automatically.
If the disc does not run automatically on your PC, open the Divar MR PC software CD and
install the program manually.
2.
Run the install file and install the programs to your computer following the InstallShield Wizard
displayed.
3.
After installation finishes you will find the programs in the start menu of the computer.
Note:
The [Divar MR Alarm Notifier] and [Divar MR Archive player] programs will
be installed with the Control Center installation.
6.3
Connecting to the DVR
6.3.1
Register the Site Name
You should register a site name to control DVR by the Control Center.
1.
Double-Click the [Divar MR Control Center] icon to start the Control Center. The menu is
displayed.
2.
Select [Tools] > [Connection Information].
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
84
en | Control Center
Digital Video Recorder
The connection list menu is displayed.
Figure 6.1 Connection list window
3.
Select [Add] and the connection setup menu is displayed.
Figure 6.2 Connection setup window
4.
5.
Enter the site name, IP address and port.
-
Site Name: Enter the description of the site.
-
IP Address: Enter the IP Address or URL of the DVR.
-
Port: Enter the Port number of the DVR. If it isn’t entered, the port number is set by
default.
Select [OK].
Figure 6.3 Connection list window
6.
F01U | 2.0 | 2008.12
Select [OK] to confirm the settings.
The registered site name is displayed.
User Manual
Bosch Security Systems
Digital Video Recorder
Control Center | en
85
Note:
In the case of entering the server name instead of the IP Address, set up the
DDNS configuration properly in the server.
6.3.2
User log on
1.
Select the registered site name and right click the mouse.
2.
Select [User Log on].
3.
Enter the user ID and enter the password.
-
ADMINISTRATOR: Operates the unit without limitations.
-
Advanced User: Uses the live and search mode functions.
-
Normal User: Shows the live image only.
Figure 6.4 Remote log on window
4.
Select [OK] and the [Divar MR Control Center] main window is activated.
•
If someone is logged on to the DVR using the Admin ID, you can not log on using the Admin ID.
•
If you want to log off, right click the mouse on the site name and select [User log off].
•
Up to 5 users can connect to the DVR system using the Control Center program as shown
below.
User
Case 1
Case 2
Case 3
Case 4
Case 5
Bosch Security Systems
User 1
Admin
Advanced
Normal
Admin
Advanced
User2
Advanced
Advanced
Normal
Normal
Normal
User Manual
User3
Normal
Normal
Normal
Normal
Normal
User4
Normal
Normal
Normal
Normal
Normal
User5
Normal
Normal
Normal
Normal
Normal
F01U | 2.0 | 2008.12
86
6.4
en | Control Center
Digital Video Recorder
Main screen of DVR Control Center Program
Figure 6.5 Main screen of DVR Control Center Program
1.
Program Menu
•
File
•
View
-
•
Channel Number: Displays or removes the channel number in the channel window.
>
Site Name: Displays or removes the site name in the channel window.
>
Camera Name: Displays or removes the camera name in the channel window.
>
Playback Time: Displays or removes the date/time of playback data in the channel
window.
>
Select All: Displays all OSD options in the channel window.
-
Video Size: Select the video size from 100%, 150% or 200%.
-
Language: Select the language for Control Center program.
Tools
Connection Infomation: To register a site name.
Help
Control Center Information: Displays Control Center Version Information.
Mode Selection Icons
•
•
F01U | 2.0 | 2008.12
>
Sequence (Dwell Time): Select the sequence to 5 seconds, 10 seconds, 15 seconds or
20 seconds.
2.
OSD
-
•
Exit: Exit the program.
Live Mode
-
Camera View: You can see the surveillance camera’s images in the window(s) and the
camera information.
-
Pan/Tilt/Zoom: You can control the PTZ cameras.
-
Log View: Displays system log list.
Search Mode
User Manual
Bosch Security Systems
Digital Video Recorder
Control Center | en
87
You can search the recorded data as shown below.
•
-
Date/Time Search (See "6.6.1 Using the Date/Time Search function")
-
Event Search (See " 6.6.2 Using the Event Search function")
-
Bookmark Search (See "6.6.3 Using the Bookmark Search function")
-
Smart Search (See " 6.6.4 Using the Smart Search function")
Remote Setup Mode
You can set the configuration of the unit.
3.
-
Camera / Display (See "6.7.1 Camera/Display setup")
-
Schedule (See "6.7.2 Schedule setup")
-
Event (See "6.7.3 Event setup")
-
Network (See "6.7.4 Network setup")
-
System (See "6.7.5 System setup")
Remote Export Icon
Click to display the Export pop-up windows. (See "6.8 Remote Export Settings")
4.
Screen Mode Selection Icons
When the icon is clicked, the screen will be changed to multiscreen view. If the icon is clicked
again, the screen will be changed by sequence.
You can view the live window(s) in full screen view. To return to the normal screen, right click
the mouse.
5.
Sequence Icon
View all the channels in sequence. You cannot use sequence mode with the 16 multiscreen
view.
6.
Information Display Window
Displays current date and time, user information, and the remaining HDD status of the
selected site name.
Figure 6.6 Information Display Window
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
88
en | Control Center
Digital Video Recorder
6.5
Live Mode
6.5.1
Using the Camera View
1.
Select the [Camera View] tab in the live mode.
2.
Select the registered site name and double click the left mouse button or click the plus mark
of the registered site name.
3.
Select [Cameras] and double click the left mouse button or click the plus mark.
Figure 6.7 Divar MR Control Center Window
4.
Select the channel number you want to view.
5.
Click the channel number and drag and drop to live window position.
If you select [Cameras] and drag and drop to a live window then all channels are displayed.
6.
Live image is displayed in the selected window.
Figure 6.8 Camera View window
7.
Repeat steps 3-5 to set the other live windows.
Notes:
•
•
F01U | 2.0 | 2008.12
Configuration of camera view is set the first time only. This configuration setup is memorized for the next time and displayed as it is.
No audio available in live mode only in playback.
User Manual
Bosch Security Systems
Digital Video Recorder
6.5.2
Control Center | en
89
Using the live window
Playback of Recorded Data
A
B
C
E
D
Figure 6.9 Camera View window
1.
Select the camera’s display window.
2.
Select the date.
The day is displayed in a blue text when recorded data exists.
3.
Select playback start time.
When using timeline to search a start time, use the zoom in/out icons for more detailed
searches (4 step).
4.
Select playback speed and mute speaker icon.
5.
Start playback using these control buttons.
Notes:
•
•
6.5.3
If you don’t want to play with sound click the speaker icon to mute.
You can not use the playback function when you log in with the Normal
User ID.
Using the Pan/Tilt/Zoom function
You can control the PTZ cameras via the network.
Figure 6.10 The Pan/Tilt/Zoom window
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
90
en | Control Center
Digital Video Recorder
1.
Select the PTZ camera channel window in the camera view mode.
2.
Select Pan/Tilt/Zoom tab.
3.
Use virtual remote control buttons to control the PTZ camera.
Button
Function
Use to Pan/Tilt the camera.
To confirm the preset position and set a menu
option in the PTZ camera.
(ZOOM)
(FOCUS)
(IRIS)
To adjust the camera zoom.
To manually adjust the focus of a camera.
To manually adjust the iris of a camera.
Displays selected preset numbers
To input the preset number.
To register preset positions.
To move the camera to the preset position.
To delete a memorized preset position.
To start a preset tour.
To displays the setup menu of the PTZ camera.
Table 6.1 Virtual remote control button table
Notes:
•
•
If someone is controlling a PTZ camera using the DVR, you cannot use
the PTZ function and vice versa.
You can not use the PTZ function when you log in with a normal user ID.
To Register preset positions
1.
Move the camera to the point you wish by using the v/V/b/B.
2.
Click the [SET] icon.
3.
Select preset the number you wish to register.
4.
Click the
icon.
The position and its numbers are memorized.
5.
F01U | 2.0 | 2008.12
Repeat steps 1-4 to add additional positions.
User Manual
Bosch Security Systems
Digital Video Recorder
Control Center | en
91
Note:
The preset range is available from 0 to 255 on this unit. However the actual
preset range differs depending on the PTZ cameras.
Changing to a picture in a preset position
The following function is available only with cameras equipped with the preset function.
The preset function makes the PTZ camera move to the programmed preset position.
It is necessary to program preset positions for the PTZ camera beforehand.
1.
Click the [MOVE] icon.
2.
Use number icons to enter the memorized preset position’s index number, Click the
icon.
The camera moves to the preset position and the picture from the camera in that position
appears on the monitor.
To clear the preset position
You can delete a memorized preset position.
1.
Click the [CLEAR] icon.
2.
Use number icons to enter the memorized preset index number, Click the
icon.
The preset position will be deleted.
To tour the preset positions
You can tour all preset positions.
1.
Click the [TOUR] icon.
All registered preset positions in the camera will be selected and the camera position image
will be switched on to the active window.
2.
You can stop the tour by clicking the [TOUR] icon.
Setup for PTZ camera
You can change the setting of PTZ camera using each item in the menu.
1.
Click the [SETUP] icon.
SETUP MENU appears in the windows.
2.
Use the arrow and
icons to set the options.
Note:
Refer to the manuals of the PTZ camera for more details.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
92
6.5.4
en | Control Center
Digital Video Recorder
Using the Log View function
You can see the system log list of selected site names in the remote setup tab via the network.
1.
Select the log view tab.
Log search menu appears.
Figure 6.11 The log search menu window
2.
Click the date icon and select the day for the log search.
(The selectable days are displayed in blue text color.)
Figure 6.12 The day select window
3.
F01U | 2.0 | 2008.12
Click the search icon.
The system log is displayed in the list.
User Manual
Bosch Security Systems
Digital Video Recorder
Control Center | en
93
Figure 6.13 The system log list window
6.6
Search mode
You can search the data of a selected site name in the remote setup tab via the network.
6.6.1
Using the Date/Time Search function
Use to search a recorded picture by specifying date, hour and minute.
Figure 6.14 The Date/Time search window
1.
Select the date/time search tab.
2.
Click the date icon and select the day (the selectable days are displayed in blue color).
3.
Select the channel window you want to view.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
94
en | Control Center
Digital Video Recorder
Check this box when you want
to view from all camera channel
windows.
Displays selected camera number.
Figure 6.15 Camera channel select window
4.
Use the timeline and time input column to search recorded data.
Figure 6.16 Recorded data search window
5.
Playback the searched data using the playback control buttons.
Figure 6.17 The playback control buttons
6.6.2
Using the Event search function
Search a recorded picture by date and event type.
Figure 6.18 The Event search window
1.
Select the event search tab.
2.
Click the date icon and select the day.
(The selectable days are displayed in blue color.)
3.
Select the camera channel for event search.
4.
Select the event type.
5.
Click the search icon.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Digital Video Recorder
Control Center | en
95
The event list is displayed.
6.6.3
6.
Select the event from the event list.
7.
You can play the searched data using the playback control buttons.
Using the Bookmark search function
Search the desired picture with a registered bookmark using the bookmark function.
Figure 6.19 The Bookmark search window
6.6.4
1.
Select the bookmark search tab.
2.
Click the search icon.
All bookmark data is displayed in the list.
3.
Select the data in the list.
4.
Play the searched data using the playback control buttons.
Using the Smart search function
Picture recorded via motion detection can be searched by specifying the motion detection
conditions.
Figure 6.20 The Smart search window
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
96
en | Control Center
Digital Video Recorder
1.
Select the Smart Search tab.
2.
Click the date icon and select the day.
(The selectable days are displayed in blue color.)
3.
Select the camera channel.
4.
Select the start time using the timeline.
Figure 6.21 Selected start time
5.
Select the end time.
6.
Select the motion sensitivity level and motion area on the display window using the mouse.
Cancel the selected area.
Select the all area.
Figure 6.22 The sensitivity level setting window
Selected area within red box.
Figure 6.23 Selected motion area
7.
F01U | 2.0 | 2008.12
Click the search icon.
The smart search data is displayed.
User Manual
Bosch Security Systems
Digital Video Recorder
Control Center | en
97
Figure 6.24 The searched data list
6.7
8.
Select the channel from the list.
9.
You can play the searched data using the playback control buttons.
Remote Setup mode
You can set the DVR of a selected site name in the remote setup tab via the network.
6.7.1
Camera / Display setup
Figure 6.25 The Camera/Display setup window
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
98
en | Control Center
Digital Video Recorder
Camera Setting
Figure 6.26 The Camera setting window
1.
Select a channel for settings.
If you want to block a channel from other users, mark up the convert option.
2.
Enter the new channel name.
3.
Select input audio channel.
4.
Set the PTZ control options.
5.
•
COM port: Select the connected data port of the RS-422/485 terminal on the rear panel.
•
Control ID: Select the PTZ camera ID from 0 to 255. Make the same settings as the PTZ
camera.
•
Protocol: Select the protocol supported by PTZ camera.
•
Baud rate: Select the communication speed (1200, 2400,4800,9600,19200 or 38400).
Set the motion options.
•
Sensitivity: Set the sensitivity level for the created motion detection area. Sensitivity can be
set from 0 to 10.
•
Relay output: Select the number of the ALARM I/O port for the output alarm signal when
motion is detected.
•
Area: Select the desired motion detection area on the preview window screen using the
mouse. Click the one point and drag & drop the end point to select the motion area.
Notes:
•
•
F01U | 2.0 | 2008.12
If you want to display the grid, mark up the [Show grid] option.
If you want to select the entire area, click the [Set all] button or click
the [Clear all] button to cancel the selected area.
User Manual
Bosch Security Systems
Digital Video Recorder
Control Center | en
99
Continuous recording settings
1.
Click the [Continuous Rec] button.
The continuous recording setting window appears.
Figure 6.27 The Continuous recording setting window
2.
Set each option using the mouse (see "3.19.4 Continuous recording").
3.
Click the [OK] button to confirm the settings.
Instant recording settings
1.
Click the [Instant Rec] button.
The instant recording setting window appears.
Figure 6.28 The Instant recording setting window
2.
Set each option using the mouse (see "3.19.5 Instant recording").
3.
Click the [OK] button to confirm the settings.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
100
en | Control Center
Digital Video Recorder
Input recording settings
1.
Click the [Input Rec] button.
The instant recording setting window appears.
Figure 6.29 The Input recording setting window
2.
Set each option using the mouse (see "3.19.6 Input recording").
3.
Click the [OK] button to confirm the settings.
Motion recording settings
1.
Click the [Motion Rec] button.
The instant recording setting window appears.
Figure 6.30 The Motion recording setting window
2.
Set each option using the mouse (see "3.19.7 Motion recording").
3.
Click the [OK] button to confirm the settings.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Control Center | en 101
Digital Video Recorder
Display settings
Figure 6.31 The Display setting window
6.7.2
1.
Set the OSD options.
2.
Set the monitor A option.
3.
Set the monitor B options.
Schedule setup
Figure 6.32 The Schedule setup window
1.
Select a day of the week.
2.
Mark up the desired recording option.
•
3.
Gray: No scheduled recording
•
Blue (Continuous recording): Recording starts automatically from the preset time.
•
Red (Input event recording): Recording starts automatically when the input is activated
within a designated time.
•
Yellow (Motion event recording): Recording starts automatically when motion is detected
within a designated time.
-
Green (Input+Motion recording): Recording starts automatically when the input is activated
or motion has been detected.
•
Blue+Red (Continuous+Input event recording): Recording starts automatically from the
preset time. When the input is activated within a designated time, change the continuous
recording mode to input event recording mode and recording starts automatically.
•
Blue+Yellow (Continuous+Motion event recording): Recording starts automatically from the
preset time. When the motion is detected within a designated time, change the continuous
recording mode to motion event recording mode and recording starts automatically.
•
Blue+Green (Continuous+Input+Motion event recording): Recording starts automatically
from the preset time. When the input is activated or motion has been detected, change
the continuous recording mode to motion event recording mode and recording starts
automatically.
Select the channel to set the schedule.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
102
en | Control Center
4.
Digital Video Recorder
Click the start time cell block and drag & drop to select a time period cell block.
or
Click the start time cell block of a channel and drag & drop across the channels to select the
time period block for multi-channel setting at the same time.
The color of the cell blocks will change.
Schedule Copy settings
Figure 6.33 The Schedule copy setting window
1.
Select the source day to copy.
2.
Select the destination day from the day of the week, weekday or weekend options.
3.
Click the copy button to copy the schedule data.
Exception day settings
Figure 6.34 The Exception day setting window
1.
Mark up the exception day option.
2.
Select the date to set the exception day schedule.
3.
Mark up the desired recording option.
4.
Select the channel to set the schedule.
5.
Click the start time cell block and drag & drop to select a time period cell block.
or
Click the start time cell block of a channel and drag & drop across the channels to select the
time period block for multi channel setting at the same time.
The color of the cell block will change.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Control Center | en 103
Digital Video Recorder
6.7.3
6.
Enter the name of the exception day.
7.
Click the add button to add the special day settings.
The exception day is added to the list.
If you want to cancel the registered exception day, select the exception day in the list and click
the delete button.
Event setup
Figure 6.35 The Event setup window
1.
2.
Set the event options.
•
Input: Displays the number of the ALARM I/O port.
•
Input type: The alarm state can be set to either N.O. (Normally Open) or N.C. (Normally
Closed).
•
Linked camera: Select the connected camera channel with the ALARM I/O port.
•
Relay out: Select the alarm output number of the RELAY-OUT terminal for the output alarm
signal.
•
Preset: Select the preset number. When the input is activated, the camera moves to the
selected preset position and the picture of the camera in that position appears on the
monitor.
Setting [Alarm ackn.] options.
•
Bosch Security Systems
Alarm ackn.: Set the “Manual” or “Post-event time” option to off.
User Manual
F01U | 2.0 | 2008.12
104
6.7.4
en | Control Center
Digital Video Recorder
Network setup
Figure 6.36 The Network setup window
TCP/IP settings
The [DHCP], [IP address], [Subnet mask], [Gateway], [Primary DNS], [Secondary DNS] and [Remote
client port no.] option settings are not available in the client program. You can set these options in
the system menu of the DVR.
•
HTTP port no.: Enter the HTTP port number.
•
Bandwidth limit: Enter the bandwidth to adjust the data traffic.
Mail settings
Set the mail options.
•
Notification: When you mark up the notification option, notify the user about unit operating
information by e-mail according to your notification settings.
•
TLS: Mark up when using the TLS (Transport Layer Security) function.
•
SMTP server: Enter the SMTP server address.
•
SMTP port no.: Enter the SMTP port number. Typically the TCP port used for SMTP is 25.
However, in some cases it is better to change this port number for added flexibility or security.
If desired, change the port number (1 ~ 65535).
•
User name: Enter the user name.
•
Password: Enter the password.
•
Mail address (1~3): Enter the mail address. You can input up to 3 e-mail addresses.
Note:
The [SMTP server], [SMTP port no.], [User name] or [Password] settings
are optional. The DVR can send e-mail directly without the use of an SMTP
server or an MTA (message transfer agent). In certain cases all e-mail
should be forwarded to a specific SMTP server. Specify the server host
name or IP address in such cases. For more detail on SMTP setup, ask your
network administrator and/or mail service provider.
Notification
Set the notification options.
•
F01U | 2.0 | 2008.12
Alarm on: Sends an e-mail when an input has been activated.
User Manual
Bosch Security Systems
Control Center | en 105
Digital Video Recorder
•
Video loss: Sends an e-mail when a video signal from the camera has stopped because of a
cable disconnection or malfunction of a camera.
•
Motion detect: Sends an e-mail when motion detection has occurred.
•
Power on/off: Sends an e-mail when power is on or off.
•
Disk full: Sends an e-mail when the HDD has fully recorded.
•
Admin PW changed: Sends an e-mail when the administrator password has changed.
DDNS
•
User ID: Enter the DDNS registered user name.
•
Password: Enter the user password in [User ID].
Note:
The DDNS function is serviced using a TCP 8245 port by “No-IP” (http://
www.no-ip.com/).
In case the DVR is used in the network system with a firewall, open the
TCP 8245 port so that DDNS data can get into firewall. For more detail
on firewall setup, ask your network administrator and/or network service
provider.
Emergency
6.7.5
•
Notification: Notify the Alarm Notifier about unit operating information according to your
notification settings.
•
IP Address, Port: Enter the IP Address and port number of the Alarm Notifier program installed
on the PC. The factory default port for this function is 9002. However, in some cases it is
better to change this port number for added flexibility or security. If desired, change the port
number (1025 ~ 65535). You can set up to 9 IP address and port numbers.
System setup
Figure 6.37 The System setup window
Date/Time settings
Set the date/time options.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
106
en | Control Center
Digital Video Recorder
•
NTP: Mark up when using the NTP (Network Time Protocol) server for time adjustment.
•
Date format: Select the date display format.
•
Time zone: This option setting is not available in the Control Center program.
•
Server: Select your time server.
The DVR will obtain the average time among 5 public servers (time.nist.gov, time-a.nist.gov,
time-b.nist.gov, ntp.nasa.gov, clock.isc.org).
•
Private time server: Enter the private time server’s IP address or host name.
•
Sync. interval: You can set synchronized interval with the NTP time server to 1 day, 1 hour, 1
week and 1 month.
•
Daylight saving: Mark up when you use the daylight saving function.
-
Start: Select the Daylight Saving start time.
-
End: Select the Daylight Saving end time.
Hard Disk
•
Overwrite: Select the overwrite recording type (Off, Normal partition, Event partition or All).
This function is possible when the selected HDD type has fully recorded.
•
Disk full warning: When the HDD has overflowed the warning message is displayed.
•
Event partition: Sets the space of event partitions for event recording.
Log Out
•
Auto user logout: Setting the logout time. You can set the auto logout time to 5 minutes, 10
minutes, 30 minutes or 60 minutes.
Sound settings
Select the beeper options.
•
Button beeper: Makes a sound when using the buttons.
•
Input beeper: Makes a sound when an input occurs.
•
Motion beeper: Makes a sound when motion is detected.
•
System beeper: Makes a sound when a cooling fan is not activated or the HDD has bad sector.
Update settings
Set the update options.
•
•
•
Item Selection: Select the items for updating.
-
PTZ Protocol: Set to PTZ Protocol update.
-
System firmware: Set to System software update.
Method: Select the update method.
-
USB: Update from USB memory stick.
-
Network: Update from the update server.
Update server: Enter the IP address of the update server.
Note:
If you can not update from the update server, check the TCP/IP options and
the IP address of the update server.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Control Center | en 107
Digital Video Recorder
User settings
Add User
You can add user.
1.
Click the “Add” button. User Setting window is displayed.
2.
Enter the User ID and Password.
3.
Enter the password again to verify.
4.
Select the user level and then click “OK” to confirm your selection.
Edit the registered User
You can change the User ID, password or user level.
1.
Choose the user ID and then click the “Edit” button.
2.
Change the ID, Password or User level, then click “OK” to confirm your selection.
Delete registered User
6.8
1.
Choose the user ID you want to delete
2.
Click the “Delete” button.
Remote Export Settings
You can copy the recorded images and audio data from the DVR unit to the PC. This function is
permitted for Administrator and Advanced user.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
108
en | Control Center
Digital Video Recorder
•
Site Name: Displays the selected site name.
•
Channel: Select a channel(s) to export the data. You can select more than one channel. Click
on the
icon to select or de-select all cameras.
•
Audio: Set to On or Off to export the audio data.
•
Start: Set the start date/time to copy.
•
End: Set the end date/time to copy.
•
Store in: Displays the current exported data save folder. You can select (or make) the folder
on the computer to save the exported data. The initial save folder is "C:\Program Files\Bosch
Security Systems\Divar MR\Exports". If you want to change the exported data save folder, click
icon and select the new folder.
the
•
Name: Enter the file name of the export data. If you don't enter a file name, the default name
CHx_start_time.exp is used.
•
Data Type: You can select the saving file format between “Native [*.exp]” and “AVI”. The Native
file is saved with the extention of "*.exp" and the AVI file is saved with the extention of "*.avi".
The saved "*.exp" file can playback using the Divar MR Archive Player program and "*.avi" file
can playback using the Windows Media Player or the other ".avi" file player.
•
Export: Click to start export the data of the selected export setting.
•
Cancel: Click it to cancel data exporting.
•
Exit: Click to exit the window.
How to export the data
1.
Set the Channel options. You can select more than one channels.
2.
Set the Start date/time options.
3.
Set the End date/time options.
4.
Select the folder on the computer to save the exported data.
5.
Enter the export data name.
6.
Select the data format.
7.
Click the Export button to begin the export.
The export status will be displayed on the Status column.
8.
Click the Exit button to exit the window.
Notes:
•
•
•
•
•
•
•
F01U | 2.0 | 2008.12
The exported data file name is made as the [Channel number_Entered
name.exp (or "avi")] type.
If you do not assign the export directory, the export directory will be set
to default directory and sub directory will be created with start date.
If you log-out from the network client, the export sequence will be terminated.
If the export data size is larger than available size of the PC, the warrning message will be displayed and you can not export the data.
If you set the time for data that does not exist, the export function is
not activated.
The warning message appears for the conditions listed below.
- When the start date/time and end date/time are the same.
- When the start date/time is later than the end date/time.
If you exit the export window during exporting, the export icon will be
blinked until the export is finished and the Export completed window
will be displayed.
User Manual
Bosch Security Systems
Additional programs | en 109
Digital Video Recorder
7
Additional programs
7.1
Alarm Notifier program
If you set the notification in the emergency option to On, the system sends a message according to
the settings of the notification options in the setup menu. (See “3.23.3 Notification”).
1.
Double-click the [Divar MR Alarm Notifier] icon to start the emergency agent program.
The Alarm Notifier icon is displayed in the system tray on the bottom right of the screen.
Figure 7.1 The Alarm Notifier icon in the system tray
2.
Whenever a notification function occurs, a message box is displayed on the bottom right of the
screen.
The message box is displayed for 5 seconds.
Figure 7.2 The message box window
3.
Check the message.
4.
Click the message box within 5 seconds to display the [Divar MR Alarm Notifier-Received
Messages] window.
or
Right click the mouse on the program icon in the system tray and select the [Check Message
Box] option to display the [Divar MR Alarm Notifier-Received Messages] window.
5.
You can check all the subjects of received messages.
6.
Click the
Bosch Security Systems
button to close the [Divar MR Alarm Notifier-Received Messages] window.
User Manual
F01U | 2.0 | 2008.12
110
7.2
en | Additional programs
Digital Video Recorder
Main Screen of Alarm Notifier program
a
d e f
b
g
c
h i
Figure 7.3 Main Screen of Emergency Agent
a
Displays message type.
b
Displays IP Address.
c
Displays received date and time.
d
Displays the port settings window.
e
Displays the search window.
f
Refreshes the received message on the list.
g
Detailed view of the received message.
h
Deletes the selected message from the list.
i
Closes the [Divar MR Alarm Notifier-Received Messages] window.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Additional programs | en 111
Digital Video Recorder
7.2.1
Port setting
Figure 7.4 Port setting window
7.2.3
1.
Click the
button.
The option window is displayed.
2.
Enter the port number of the emergency agent listening port. The factory default port is 9002.
However in some cases it is better to change this port number for added flexibility or security.
If desired change the port number (1025 ~ 65535).
3.
Click the OK button to exit.
Message search
Figure 7.5 Message search window
1.
Click the
button.
The message search window is displayed.
2.
Select the search method.
3.
•
Event search: Search by selected type of event for the message.
•
Date search: Search by selected date.
Click the Search button.
The search message is displayed on the [Divar MR Alarm Notifier-Received Messages] window.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
112
7.2.4
en | Additional programs
Digital Video Recorder
Delete the message from the list
1.
Select the message(s) you want to delete.
2.
Click the
button.
The confirmation window is displayed.
Figure 7.6 The confirmation window
3.
7.3
Click [Yes] to delete the message.
Archive Player program
You can playback from the archived data on the PC using this program. The Archive Player program
is saved automatically when you install the Control center program or archive the data.
7.3.1
Main screen of Archive Player
Figure 7.7 The Archive Player window
•
Program Menu.
-
File(F)
> Open: Open the archived file.
> Print: Print image in window of Archive Player.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Additional programs | en 113
Digital Video Recorder
> Exit: Exit the program.
-
Lang(L): Select the language for Archive Player program.
-
Help(H)
> About Archive Player: Displays Archive Player information.
•
•
Control Icons
-
: Pauses playback.
-
: Starts playback.
-
: Stops playback.
Watermark Setting
Check the option “Check watermark”. If the file which is in playback differs from the file that
is originally recorded, a warning window will appear.
•
7.3.2
Video Information
-
File Name: Displays the file name.
-
Video Format: Displays the video type of the data.
-
Time: Displays the recorded date and time of data.
-
Recording Mode: Displays the save mode of the data. (continuous, motion or other).
-
Camera Number: Displays the camera channel number of recorded data.
Playing data
1.
Double-Click the [Divar MR Archive Player] icon on the PC or [Archive Player] folder of the
external USB device. If you insert the exported data CD or DVD disc, the Archive Player
program run automatically.
The Archive Player window is displayed.
2.
Select [File(F)] > [Open].
The open window is displayed.
Figure 7.8 The open window
3.
Select the root directory of the USB device and select the desired file.
An example of playable file format is “Channel name_date_time.exp”.
4.
Click the [Open] button.
The selected data is played back automatically.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
114
en | Additional programs
Digital Video Recorder
Figure 7.9 The Archive Player window
5.
F01U | 2.0 | 2008.12
Click the
button to stop playback.
User Manual
Bosch Security Systems
Additional programs | en 115
Digital Video Recorder
7.4
Web Viewer program
7.4.1
Logging into the Web Viewer
1.
Start the web browser.
2.
In the Address Box, enter “HTTP://” and the IP Address of the DVR.
3.
Press ENTER, then the Web Viewer and the Remote log on menu will be displayed.
Figure 7.10 The Remote log on menu
4.
Enter the User Type and Password.
5.
Click [OK].
Notes:
•
•
Bosch Security Systems
If the web viewer is not displayed, check the TCP/IP settings of the DVR.
If you connect the DVR for the first time, the Security Warning window
is displayed. You must click [Install] on the Security Warning window to
install the program for using the Web Viewer. If you click [Don’t Install],
the Web Viewer program is not available.
User Manual
F01U | 2.0 | 2008.12
116
7.4.2
en | Additional programs
Digital Video Recorder
Using the Web Viewer
You can control the live image using the Web Viewer.
Figure 7.11 The Web Viewer window
Mode select icon. Click to change the PTZ View mode
or Live View mode.
Multiscreen selection icons.
Live screen display window.
7.4.3
Live screen control
•
Left mouse button: Select the channel. If you want to set to full screen, double click the
selected channel. To return to the previous screen, double click again.
•
Right mouse button: If you want to exit full screen mode, right click the mouse to return to the
normal screen.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Additional programs | en 117
Digital Video Recorder
7.4.4
PTZ View control
•
Click the
displayed.
icon to change the PTZ view mode. The PTZ virtual remote control is
Figure 7.12 The PTZ virtual remote control window
•
Use virtual remote control buttons to control the PTZ camera.
For more details, refer to “6.5.3 Using the Pan/Tilt/Zoom function”.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
118
en | Additional programs
F01U | 2.0 | 2008.12
Digital Video Recorder
User Manual
Bosch Security Systems
Reference | en 119
Digital Video Recorder
8
REFERENCE
8.1
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Symptoms
The system power
does not turn on.
Resolutions
Check that the power cable is connected correctly.
Check that the input voltage is correct.
If the system power does not turn on even if the power cable is
connected correctly, please contact the service center.
The system power
is turned on but
no video data is
displayed on the
monitor.
Check that the monitor power cable is connected properly.
Make sure the monitor is turned on.
Check the video output cable of the DVR is properly connected to the
monitor.
Check the selected monitor type (see “3.12 Selecting the main monitor
type”).
Unplug the power cable and plug in again.
The camera numbers
are displayed on
the screen but the
camera images are not
displayed.
Check that the camera video output is connected to the DVR system
correctly.
Check that the power cable on the camera is connected correctly.
Check the video cable connection from the camera to the DVR system.
Turn off the DVR system and turn it on again.
The camera video is
shown on the screen
but the system does
not record the video.
Check the recording mode in the record setting menu.
Check the HDD detection status in the System Information window. If
the HDD detection status is abnormal, check the HDD formatting.
Check the recordable disk space in the HDD.
Check the overwrite option in the setup menu for overwrite recording.
It is impossible to
search through the
recorded video.
Check if there is recorded video data for the time that you are trying to
search on the table.
If there is no recorded video data, check the recording mode in the
record setting menu.
Check the HDD detection status in the system information window. If
the HDD detection status is abnormal, check the HDD formatting.
Check the user type. The search function is not available for a normal
user.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
120
en | Reference
Digital Video Recorder
Symptoms
Audio data recorded
with video data is not
playing.
Resolutions
Check that the audio recording option is correctly set for the camera
you wish to record audio.
Check that the speaker and audio (line input) on the rear of system are
connected correctly.
Check that the connected speaker is working properly.
The colors of some
camera videos are
strange or videos are
displayed abnormally.
If the camera connected to the system has a problem, check that the
camera is not damaged by connecting another camera into a working
video output.
There is a lot of
(screen) noise
accompanying the
image.
Check if the video signal output from the camera has a problem. Ensure
the camera is not damaged by trying another camera with a working
video output.
Check video format setting of the unit is the same as the connected
camera’s video format. Depending on your region, the camera’s video
format can support either PAL or NTSC. Depending on the camera’s
video format, the video process can differ greatly, therefore it can
be difficult to recognize the video data if the video format setting is
different from the camera’s video format.
Check if the video cable connection between the camera and the DVR is
cut, crosswired, or shorted.
Check if there is a high voltage wire around the video cable connection
between camera and DVR system. It can cause interference and affect
video quality.
Check that the video cable connection between the camera and the DVR
system is the correct video cable. When a normal power-supplying cable
is used instead of the video cable, screen noise can be generated.
The connected input is
not operating.
Check that the type of input in the camera setting is the same as with
the connected input.
Check that the system is set to use the input in the recording schedule
window in the recording setting menu.
Check that the input is properly connected to the ALARM-I/O.
The connected
PTZ camera is not
operating.
Check that the system is set to use the PTZ camera in the camera
setting menu.
Check that the power cable of the PTZ camera is properly connected.
Check that the signal cable of the PTZ camera is properly connected.
Check that the selected channel to control the PTZ camera.
Check the user type. The PTZ camera control is not available for a
normal user.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Reference | en 121
Digital Video Recorder
Symptoms
An e-mail sent
from this product
was not received.
Resolutions
E-mail reception failed without SMTP server setting.
• Make sure the network is correctly set.
• Make sure the mail address is input correctly.
• Check the spam mail setting of the inputted mail address.
(If you set the spam mail, some mails are deleted automatically or classified in the spam mail box)
• Some of SMTP mail services do not support e-mails from private SMTP
servers. In this case, use the public SMTP server.
E-mail reception failed even if the SMTP server was set.
• When the [Please check the SMTP information or internet cable] message is displayed.
- Check the SMTP server address.
- Check the SMTP port number. (Default setting is 25).
- Check the network settings.
• When the [Please check the authentication information] message is displayed.
- Check the user name.
- Check the password.
• The mail reception failed without error message.
- Check the receiver’s mail address.
- Check that your e-mail is not classified as spam on the receiver's mail
setting.
The remote control
does not work
properly.
Check the batteries in the remote control.
Check the ID setting for the remote control (See “3.24.9 System”).
Note:
If you observe any of the following symptoms:
• Some of the front panel LEDs do not light.
• The DVR does not operate normally.
You can reboot the DVR as follows:
• Turn off the DVR and turn it on again after a few seconds.
When the recorder does not work normally after rebooting, contact the
service center.
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
122
en | Reference
Digital Video Recorder
8.2
Recommended devices
8.2.1
Supported USB Memory list
8.2.2
No.
Maker
Model Name
Capacity
USB Version
1
Sandisk
Cruzer Micro
256MB / 512MB / 1GB
Ver 2.0
2
Sony
Ultra Mini USM
256MB / 512MB / 1GB
Ver 2.0
3
Transcend
JF 120 2.0
256MB / 512MB / 1GB
Ver 2.0
4
Imation
Mini Drive
256MB / 512MB / 1GB
Ver 2.0
Supported CD/DVD Media list
Maker
CD-R
CD-RW
DVD-R
DVD-RW
DVD+R
DVD+RW
Mitsubishi
Yes
Yes
Yes
Yes
Yes
Yes
Imation
Yes
Yes
Yes
Yes
Yes
Yes
Tayioyuden
Yes
No
Yes
No
Yes
No
TDK
Yes
No
Yes
Yes
Yes
Yes
Note:
8cm 1.4G mini DVD is not supported.
8.2.3
Supported function list for device
Device
Instant
backup
Schedule
backup
Export
Configuration Import/
Export
CD/DVD
Yes
No
Yes
No
USB memory
Yes
Yes
Yes
Yes
USB HDD
Yes
Yes
Yes
Yes
Note:
If you use a USB memory stick or USB HDD for configuration import/
export, you must disconnect the other external USB devices.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Reference | en 123
Digital Video Recorder
8.2.4
Supported PTZ camera list
Protocol Name
Maker
Pan/
Tilt
Zoom
Focus
Iris
Preset
Tour
Setup
BOSCH
BOSCH
YES
YES
YES
YES
YES
YES
YES
PELCO D
PELCO
YES
YES
YES
YES
YES
YES
YES
PELCO P
PELCO
YES
YES
YES
YES
YES
YES
YES
GANZ_DSCP
CBC
YES
YES
YES
YES
YES
YES
YES
GANZ_P360V1
CBC
YES
YES
YES
YES
YES
YES
NO
LG_MULTIX
LG
YES
YES
YES
YES
YES
YES
YES
LG_SD168
LG
YES
YES
YES
YES
YES
YES
YES
KALATEL_
CYBERDOM
KALATEL
YES
YES
YES
YES
YES
YES
NO
PANASONIC_
CS850
PANASONIC
YES
YES
YES
YES
YES
YES
YES
SAMSUNG_SCC
SAMSUNG
YES
YES
YES
YES
YES
YES
YES
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
124
8.3
en | Reference
Digital Video Recorder
Time zones
Timezone name
Eniwetok, Kwajalein
Midway Island, Samoa
Hawaii
Alaska
Pacific Time (US and Canada); Tijuana
Mountain Time (US and Canada), Chihuahua, La Paz,
Mazatlan, Arizona
Central Time (US and Canada), Saskatchewan,
Guadalajara, Mexico City, Monterrey, Central America
Eastern Time (US and Canada), Indiana (East), Bogota,
Lima, Quito
Atlantic Time (Canada), Caracas, La Paz, Santiago
Newfoundland
Brasilia, Buenos Aires, Georgetown, Greenland
Mid-Atlantic
Azores, Cape Verde Islands
Greenwich Mean Time: Dublin, Edinburgh, Lisbon,
London, Casablanca, Monrovia
Amsterdam, Belgrade, Bratislava, Budapest, Ljubljana,
Prague, Sarajevo, Skopje, Warsaw, Zagreb, Brussels,
Copenhagen, Madrid, Paris, Berlin, Bern, Rome,
Stockholm, Vienna, West Central Africa
Athens, Istanbul, Minsk
Bucharest, Cairo, Pretoria, Jerusalem, Harare, Pretoria
Helsinki, Riga, Israel, Kyiv, Sofia, Tallinn, Vilnius
Baghdad, Kuwait, Riyadh, Nairobi
Moscow, St.Petersburg, Volgograd
Tehran
Abu Dhabi, Muscat, Baku, Tbilisi, Yerevan
Kabul
Ekaterinburg, Islamabad, Karachi, Tashkent
Bombay, Calcutta, Madras, New Delhi, Chennai, Kolkata
Almaty, Dhaka, Colombo, Astana, Sri Jayawardenepura,
Novosibirsk
Bangkok, Hanoi, Jakarta, Krasnoyarsk
Beijing, Changqing, Hong Kong, Uramqi
Perth, Singapore, Taipei, Beijing, Chongqing, Hong Kong
SAR, Urumqi, Kuala Lumpur, Irkutsk, Ulaan Bataar
Osaka, Sapporo, Tokyo
Seoul, Yakutks
Adlaide, Darwin
Brisbane, Guam, Port Moresby
Canberra, Melbourne, Sydney
Hobart, Vladivostok
Magadan, Solomon Islands, New Caledonia
Auckland, Wellington
Fiji Islands, Kamchatka, Marshall Islands
F01U | 2.0 | 2008.12
User Manual
Timezone
Abbreviation
EK
MIS
HAW
ALA
PST
Timezone
DST
-12:00
-11:00
-10:00
-09:00
-08:00
-08:00
-07:00
MST
-07:00
-06:00
CST
-06:00
-05:00
EST
-05:00
-04:00
AST
NWF
BBA
MAT
AZO
-04:00
-03:30
-03:00
-02:00
-01:00
GMT
0
+01:00
AMS
+01:00
+02:00
AIM
BCP
HRI
BKR
MSV
THE
ABT
KAB
EIK
BCD
+02:00
+02:00
+02:00
+03:00
+03:00
+03:30
+04:00
+04:30
+05:00
+05:30
+03:00
+03:00
+03:00
+04:00
+04:00
+04:30
ADC
+06:00
BHJ
BHU
+07:00
+08:00
SST
+08:00
OST
SYA
ADA
BGP
CMS
HVL
MSN
AWE
FKM
+09:00
+09:00
+09:30
+10:00
+10:00
+10:00
+11:00
+12:00
+12:00
-02:30
+12:00
Bosch Security Systems
Reference | en 125
Digital Video Recorder
8.4
Factory default configuration settings
Classification
1st level
Detailed Items
2nd level
3rd level
Default Setting
DVR-16K/
DVR-8K/
DVR-16L
DVR-8L
Factory
Default
Ch
Camera
Video adj.
PTZ
Continuous Rec
Camera
Instant Rec
Input Rec
Name
Covert
Audio
Channel
Brightness
Contrast
Color
Camera
COM port
Control ID
Protocol
Baud rate
PTZ test
Ch
Resolution
Quality
Frame rate
Ch
Resolution
Quality
Frame rate
Ch
Resolution
Quality
Frame rate
Pre-event
Post-event
Motion Rec
Schedule
Bosch Security Systems
Video format
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Exception days
Ch
Resolution
Quality
Frame rate
Pre-event
Post-event
Video format
User Manual
Camera 1 ~
Camera 16
Camera 1 ~
Camera 8
Off
01 ~ 08, None
01 ~ 04, None
01:Name
50
50
50
01:Name
None
00
Bosch
9600
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
352X240 (NTSC), 352X288 (PAL)
Normal
30 IPS (NTSC), 25 IPS (PAL)
Yes
Yes
Yes
352X240 (NTSC), 352X288 (PAL)
Normal
30 IPS (NTSC), 25 IPS (PAL)
Yes
Yes
Yes
352X240 (NTSC), 352X288 (PAL)
Normal
30 IPS (NTSC), 25 IPS (PAL)
Off
Yes
Yes
Yes
Yes
10sec
Yes
352X240 (NTSC), 352X288 (PAL)
Normal
30 IPS (NTSC), 25 IPS (PAL)
Off
10sec
PAL to EMEA/APR, NTSC to US
Continuous
Continuous
Continuous
Continuous
Continuous
Continuous
Continuous
Continuous
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
F01U | 2.0 | 2008.12
126
en | Reference
Digital Video Recorder
Classification
1st level
Detailed Items
2nd level
OSD
Display
Monitor A
Monitor B
Input
Event
Motion
Alarm ackn.
TCP/IP
DDNS
Network
Notification
Mail
Emergency
F01U | 2.0 | 2008.12
3rd level
Language
Camera name
Camera status
Seq. dwell time
Seq. dwell time
Event popup
In
Input type
Camera
Relay output
Preset
Camera
Sensitivity
Relay output
Area
Alarm ackn.
DHCP
IP address
Subnet mask
Gateway
Primary DNS
Secondary DNS
Remote client port
no.
HTTP port no.
Bandwidth limit
User name
Password
Alarm on
Motion detect
Disk full
Admin PW changed
Video loss
Power on/off
Notification
SMTP server
SMTP port no.
User name
Password
TLS
Mail address 1
Mail address 2
Mail address 3
Notification
IP address
Port no.
User Manual
Default Setting
DVR-16K/
DVR-8K/
DVR-16L
DVR-8L
English
On
On
2 sec
2 sec
Off
N.O.
01~16
01~08
Factory
Default
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
None
None
01:Name
5
None
On
Post-event time
On
NULL
NULL
NULL
NULL
NULL
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
9001
Yes
80
100 Mbps
NULL
NULL
Off
Off
Off
Off
Off
Off
Off
NULL
25
NULL
NULL
Off
NULL
NULL
NULL
Off
NULL
9002
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Bosch Security Systems
Reference | en 127
Digital Video Recorder
Classification
1st level
Detailed Items
2nd level
Default Setting
3rd level
Date
Date/Time
NTP
Beeper
DVR-16K/
DVR-16L
DVR-8K/
DVR-8L
2007.01.01
Factory
Default
No
Time
0:00
No
Date format
YYYY/MM/DD
Yes
Time format
12 hr
Yes
Time zone
GMT
No
Daylight saving
Off
No
Daylight saving start
Jan / 1st / Sun / 00
No
Daylight saving end
Jan / 1st / Sun / 00
No
NTP
Off
Yes
Time server
Public server
Yes
Private time server
NULL
Yes
Sync. interval
1 day
Yes
Button beeper
Off
Yes
Input beeper
Off
Yes
Motion beeper
Off
Yes
System beeper
On
Yes
No.
User
System
Update
ID
NULL
No
Level
Normal user
No
Password
000000
No
Item
System firmware
Yes
Method
USB
Yes
Update server
NULL
Yes
Normal partition
Yes
Disk full warning
Off
Yes
Event partition
20%
No
Auto delete
Off
Yes
Format
All
Yes
Partition selection
All
Yes
Schedule
Off
Yes
Schedule start
0
Yes
Time range date
0
Yes
Time range start
0
Yes
Import configuration
Configuration
Export configuration
Factory defaults
Overwrite
Hard disk
Device
Backup
System
Bosch Security Systems
Time range end
0
Yes
IR remote controller
01
Yes
DVR ID
01
Yes
Auto user logout
Off
Yes
User Manual
F01U | 2.0 | 2008.12
128
8.5
en | Reference
Digital Video Recorder
Recording Time Table (500GB HDD)
Recording Time (Hr)
Resolution
(NTSC/PAL)
Quality
Lowest
Low
352x240/
352x288
Normal
High
Best
F01U | 2.0 | 2008.12
Video
(NTSC/PAL)
IPS
(NTSC/PAL)
Video+Audio
(NTSC/PAL)
DVR-8K/
DVR-8L
DVR-16K/
DVR-16L
DVR-8K/
DVR-8L
DVR-16K/
DVR-16L
30/25
550/440
275/220
501/401
251/201
20/20
571/457
285/228
518/415
259/207
15/12.5
833/666
416/333
726/581
363/290
7.5/6
1185/948
593/474
979/784
490/392
5/5
1427/1141
713/571
1139/911
569/455
3/3
1712/1370
856/685
1313/1051
657/525
1/1
2703/2162
1352/1081
1828/1462
914/731
30/25
481/385
241/193
444/355
222/177
20/20
541/432
270/216
493/395
247/197
15/12.5
700/560
350/280
623/498
312/249
7.5/6
963/770
481/385
823/658
411/329
5/5
1048/838
524/419
884/707
442/354
3/3
1185/948
593/474
979/784
490/392
1/1
1926/1541
963/770
1436/1149
718/574
30/25
321/257
160/128
304/243
152/121
20/20
342/274
171/137
323/258
161/129
15/12.5
550/440
275/220
501/401
251/201
7.5/6
717/573
358/287
636/509
318/254
5/5
815/652
408/326
712/570
356/285
3/3
875/700
438/350
758/606
379/303
1/1
1401/1121
700/560
1122/898
561/449
30/25
241/193
120/96
231/185
115/92
20/20
278/222
139/111
265/212
132/106
15/12.5
385/308
193/154
361/288
180/144
7.5/6
541/432
270/216
493/395
247/197
5/5
642/514
321/257
576/461
288/231
3/3
770/616
385/308
678/542
339/271
1/1
1141/913
571/457
949/759
475/380
30/25
151/121
76/60
147/118
74/59
20/20
180/144
90/72
175/140
87/70
15/12.5
257/205
128/103
246/196
123/98
7.5/6
376/301
188/150
352/282
176/141
5/5
471/377
236/188
435/348
217/174
3/3
535/428
267/214
489/391
244/195
1/1
820/656
410/328
716/572
358/286
User Manual
Bosch Security Systems
Reference | en 129
Digital Video Recorder
Recording Time (Hr)
Resolution
(NTSC/PAL)
Quality
Lowest
Low
704x240/
704x288
Normal
High
Best
Lowest
704x480/
704x576
Low
Normal
Bosch Security Systems
Video
(NTSC/PAL)
IPS
(NTSC/PAL)
Video+Audio
(NTSC/PAL)
DVR-8K/
DVR-8L
DVR-16K/
DVR-16L
DVR-8K/
DVR-8L
DVR-16K/
DVR-16L
15/15
642/514
321/257
576/461
288/231
7.5/7.5
906/725
453/363
781/625
390/312
5/5
1141/913
571/457
949/759
475/380
3/3
1284/1027
642/514
1046/837
523/418
1/1
2266/1813
1133/906
1617/1293
808/647
15/15
593/474
296/237
536/429
268/215
7.5/7.5
833/666
416/333
726/581
363/290
5/5
885/708
443/354
765/612
383/306
3/3
951/761
476/380
814/651
407/326
1/1
1572/1258
786/629
1230/984
615/492
15/15
428/342
214/171
398/318
199/159
7.5/7.5
571/457
285/228
518/415
259/207
5/5
634/507
317/254
570/456
285/228
3/3
700/560
350/280
623/498
312/249
1/1
1101/880
550/440
921/737
460/368
15/15
358/287
179/143
337/270
168/135
7.5/7.5
481/385
241/193
444/355
222/177
5/5
541/432
270/216
493/395
247/197
3/3
593/474
296/237
536/429
268/215
1/1
923/738
461/369
793/634
396/317
15/15
208/167
104/83
201/161
100/80
7.5/7.5
314/252
157/126
298/238
149/119
5/5
395/316
198/158
369/295
185/148
3/3
433/346
216/173
402/322
201/161
1/1
744/595
372/298
658/526
329/263
7.5/7.5
428/342
214/171
398/318
199/159
5/5
552/442
276/221
503/402
252/201
3/3
642/514
321/257
576/461
288/231
1/1
1133/906
566/453
943/755
472/377
7.5/7.5
390/312
195/156
365/292
182/146
5/5
463/370
231/185
428/342
214/171
3/3
507/405
253/203
465/372
233/186
1/1
786/629
393/314
690/552
345/276
7.5/7.5
280/224
140/112
267/214
133/107
5/5
302/242
151/121
287/229
143/115
3/3
335/268
167/134
316/253
158/126
1/1
499/399
249/199
458/367
229/183
User Manual
F01U | 2.0 | 2008.12
130
en | Reference
Digital Video Recorder
Recording Time (Hr)
Resolution
(NTSC/PAL)
Quality
High
704x480/
704x576
Best
Video
(NTSC/PAL)
IPS
(NTSC/PAL)
Video+Audio
(NTSC/PAL)
DVR-8K/
DVR-8L
DVR-16K/
DVR-16L
DVR-8K/
DVR-8L
DVR-16K/
DVR-16L
7.5/7.5
220/176
110/88
212/169
106/85
5/5
263/211
132/105
252/201
126/101
3/3
291/233
145/116
276/221
138/111
1/1
440/352
220/176
408/327
204/163
7.5/7.5
162/130
81/65
158/126
79/63
5/5
198/158
99/79
191/153
95/76
3/3
220/176
110/88
212/169
106/85
1/1
320/256
160/128
303/242
151/121
Note:
This recording time table is for reference only.
The recording time can be different depending on your surveillance
environment.
8.6
Recording Time Table (160GB HDD)
Resolution
(NTSC/PAL)
Quality
Lowest
352x240/
352x288
Low
Normal
F01U | 2.0 | 2008.12
IPS
(NTSC/PAL)
30/25
20/20
15/12.5
7.5/6
5/5
3/3
1/1
30/25
20/20
15/12.5
7.5/6
5/5
3/3
1/1
30/25
20/20
15/12.5
7.5/6
5/5
3/3
1/1
Recording Time (Hr)
Video
Video+Audio
(NTSC/PAL)
(NTSC/PAL)
DVR-8K/
DVR-16K/
DVR-8K/
DVR-16K/
DVR-8L
DVR-16L
DVR-8L
DVR-16L
176/141
88/70
160/128
80/64
183/146
91/73
166/133
83/66
267/213
133/107
232/186
116/93
379/303
190/152
313/251
157/125
457/365
228/183
364/292
182/146
548/438
274/219
420/336
210/168
865/692
432/346
585/468
292/234
154/123
77/62
142/114
71/57
173/138
86/69
158/126
79/63
224/179
112/90
199/159
100/80
308/247
154/123
263/211
132/105
335/268
168/134
283/226
141/113
379/303
190/152
313/251
157/125
616/493
308/247
459/368
230/184
103/82
51/41
97/78
49/39
110/88
55/44
103/83
52/41
176/141
88/70
160/128
80/64
229/183
115/92
203/163
102/81
261/209
130/104
228/182
114/91
280/224
140/112
243/194
121/97
448/359
224/179
359/287
180/144
User Manual
Bosch Security Systems
Reference | en 131
Digital Video Recorder
Recording Time (Hr)
Resolution
(NTSC/PAL)
Quality
High
352x240/
352x288
Best
Lowest
Low
704x240/
704x288
Normal
High
Best
Bosch Security Systems
Video
(NTSC/PAL)
IPS
(NTSC/PAL)
Video+Audio
(NTSC/PAL)
DVR-8K/
DVR-8L
DVR-16K/
DVR-16L
DVR-8K/
DVR-8L
DVR-16K/
DVR-16L
30/25
77/62
39/31
74/59
37/30
20/20
89/71
44/36
85/68
42/34
15/12.5
123/99
62/49
115/92
58/46
7.5/6
173/138
86/69
158/126
79/63
5/5
205/164
103/82
184/148
92/74
3/3
247/197
123/99
217/174
108/87
1/1
365/292
183/146
304/243
152/122
30/25
48/39
24/19
47/38
24/19
20/20
58/46
29/23
56/45
28/22
15/12.5
82/66
41/33
79/63
39/31
7.5/6
120/96
60/48
113/90
56/45
5/5
151/121
75/60
139/111
70/56
3/3
171/137
86/68
156/125
78/63
1/1
262/210
131/105
229/183
114/92
15/15
205/164
103/82
184/148
92/74
7.5/7.5
290/232
145/116
250/200
125/100
5/5
365/292
183/146
304/243
152/122
3/3
411/329
205/164
335/268
167/134
1/1
725/580
363/290
517/414
259/207
15/15
190/152
95/76
172/137
86/69
7.5/7.5
267/213
133/107
232/186
116/93
5/5
283/227
142/113
245/196
122/98
3/3
304/243
152/122
260/208
130/104
1/1
503/402
252/201
393/315
197/157
15/15
137/110
68/55
127/102
64/51
7.5/7.5
183/146
91/73
166/133
83/66
5/5
203/162
101/81
182/146
91/73
3/3
224/179
112/90
199/159
100/80
1/1
352/282
176/141
295/236
147/118
15/15
115/92
57/46
108/86
54/43
7.5/7.5
154/123
77/62
142/114
71/57
5/5
173/138
86/69
158/126
79/63
3/3
190/152
95/76
172/137
86/69
1/1
295/236
148/118
254/203
127/101
15/15
67/53
33/27
64/51
32/26
7.5/7.5
101/80
50/40
95/76
48/38
5/5
126/101
63/51
118/95
59/47
3/3
138/111
69/55
129/103
64/51
1/1
238/191
119/95
210/168
105/84
User Manual
F01U | 2.0 | 2008.12
132
en | Reference
Digital Video Recorder
Recording Time (Hr)
Resolution
(NTSC/PAL)
Quality
Lowest
Low
704x480/
704x576
Normal
High
Best
Video
(NTSC/PAL)
IPS
(NTSC/PAL)
Video+Audio
(NTSC/PAL)
DVR-8K/
DVR-8L
DVR-16K/
DVR-16L
DVR-8K/
DVR-8L
DVR-16K/
DVR-16L
7.5/7.5
137/110
68/55
127/102
64/51
5/5
177/141
88/71
161/129
80/64
3/3
205/164
103/82
184/148
92/74
1/1
363/290
181/145
302/242
151/121
7.5/7.5
125/100
62/50
117/93
58/47
5/5
148/118
74/59
137/109
68/55
3/3
162/130
81/65
149/119
74/60
1/1
252/201
126/101
221/177
110/88
7.5/7.5
90/72
45/36
85/68
43/34
5/5
97/77
48/39
92/73
46/37
3/3
107/86
54/43
101/81
51/40
1/1
160/128
80/64
147/117
73/59
7.5/7.5
70/56
35/28
68/54
34/27
5/5
84/67
42/34
81/64
40/32
3/3
93/74
47/37
88/71
44/35
1/1
141/113
70/56
131/105
65/52
7.5/7.5
52/42
26/21
50/40
25/20
5/5
63/51
32/25
61/49
31/24
3/3
70/56
35/28
68/54
34/27
1/1
102/82
51/41
97/77
48/39
Note:
This recording time table is for reference only.
The recording time can be different depending on your surveillance
environment.
F01U | 2.0 | 2008.12
User Manual
Bosch Security Systems
Reference | en 133
Digital Video Recorder
8.7
Specifications
Model
Input
DVR-8K/DVR-8L
DVR-16K/DVR-16L
8
16
Composite video 0.5-2Vpp, 75 ohm, automatic termination.
Loop
Through
Video
Output
8
16
Mon A
(CVBS)
1
1
Mon A
(VGA)
1
Mon B
(CVBS)
1
1.0Vpp±0.1V, 75 Ω
1
1.0Vpp±0.1V, 75 Ω
4
Input
8
Line In, 30KΩ
Audio
1
Output
1
Line, 100 KΩ
8
Input
Alarm
1
Analog RGB 800x600
16
Opto-coupled alarm input (Max. 5V)
4
Output
8
1A 30V DC, 0.3A 125V AC
Pre-Alarm Recording
Recording
Search
Display
Frame
Rate
(/sec)
Up to 60 sec
NTSC
Up to 240 IPS @ 352x240
Up to 120 IPS @ 704x240
Up to 60 IPS @ 704x480
Up to 480 IPS @ 352x240
Up to 240 IPS @ 704x240
Up to 120 IPS @ 704x480
PAL
Up to 200 IPS @ 352x288
Up to 100 IPS @ 704x288
Up to 50 IPS @ 704x576
Up to 400 IPS @ 352x288
Up to 200 IPS @ 704x288
Up to 100 IPS @ 704x576
Playback Function
FF, FB, Frame Advance
Search Mode
Date/Time, Event (Motion, Input), Bookmark, Smart
Frame
Rate
(/sec)
NTSC
240 IPS
(Real time per each channel)
480 IPS
(Real time per each channel)
PAL
200 IPS
(Real time per each channel)
400 IPS
(Real time per each channel)
1, 4, 9, 1+5
1, 4, 9, 16, 1+5, 1+7
Multiscreen Mode
Internal
HDD
Backup
Serial I/F
Network
Security
Bosch Security Systems
Max Capacity
2TB (Up to 4 HDDs)
Backup Interface
USB 2.0 (x3), Network
Supportable Devices
USB Memory, CD-RW, DVD-RW, HDD
PTZ Control Interface
RS-485/ RS-422
Serial Interface
RS-232C (D-SUB9)
Biphase
1 connector (5 outputs)
Network Connection
Ethernet 10/100BaseT (RJ-45)
Network Transmittion
Speed
Up to120 IPS @ 352x240
Bandwidth Control
Yes
Password Protection
Yes
Image Authentication
Yes
User Manual
F01U | 2.0 | 2008.12
134
en | Reference
Digital Video Recorder
Model
DVR-8K/DVR-8L
Power
100~240VAC, 50/60Hz
Power consumption
Max. 80 W (with 1x HDD) / Max. 120 W (with 4x HDD)
Dimension (WxDxH)
430 x 425 x 88 mm / 16.9 x 16.7 x 3.5 inch
Net Weight (with 4x HDD)
9 Kg / 19.8lbs
Operation Temp. / Humidity
0 ºC ~ 40 ºC (32 ºF ~ 104 ºF) / 0%RH ~ 80%RH
Bi-phase
Impedance
128 ohm. max
Overvoltage protection
±40V
Max. cable length
F01U | 2.0 | 2008.12
DVR-16K/DVR-16L
1.5 Km (0.9 miles)
Keyboard Output
Conform RS485 max. signal voltage ±12V
DVD writer
DVD+R / DVD+RW, DVD-R / DVD-RW, CD-R / CD-RW
User Manual
Bosch Security Systems
Reference | en 135
Digital Video Recorder
Bosch Security Systems
User Manual
F01U | 2.0 | 2008.12
136
en | Reference
F01U | 2.0 | 2008.12
Digital Video Recorder
User Manual
Bosch Security Systems
Bosch Security Systems
www.boschsecurity.com
© Bosch Security Systems, 2008
F01U | 2.0 | 2008.12
P/N: MFL????????