Metz 70 TE 65 Operating instructions

TV. VIDEO. AUDIO. MECABLITZ
Elba
63 TD 61 – 100 MT
Hawaii
70 TD 64 – 100 MT
Linea – SF
72 TD 66 – 100 MT
Linea de luxe – SF 72 TD 67 – 100 MT
Gemini– SF
82 TE 93 – 100 MT
Morea– S
70 TE 65 – 100 MT
Operating Instructions
Hints for use of the Operating Instructions
Do not be put off by the size of the Operating Instructions. Initially, it is sufficient to read the instructions in Sections 1.1, 2 and 4.
In order to familiarise yourself with the TV set and its many functions, we recommend that you read the Operating Instructions
step by step, carrying out the described actions on your TV set as
you do so.
This method, often called "learning by doing", is the easiest way
of learning how to execute the various functions.
Do not be afraid to change the settings in the various menus (the
TV menu, the TV station table, programming of the function keys,
etc.). If you make any changes to these settings, the TV set reacts immediately, but the changes are not yet stored. After each
change in a menu, a red box is displayed at the bottom right of
the screen, asking if you want to save the changes.
• If you want to save the changes, press the OK key to do so.
• If you are not sure, or if you do not want to save a changed setting, press the MENU key and then the TV key to exit from the
menu without saving the new settings.
We have made every effort to provide a detailed table of contents
and a comprehensive index to help you to find the information
you need. The Section "Glossary" contains explanations of
various technical terms used in the manual.
In the descriptions of the various functions, the left-hand column
shows which keys you must press in order to see the screen display given in the centre column. Do not press the keys too quickly. It may occur that the TV set will not recognise the next key you
press and may therefore not display the menu shown in the centre column but something completely different. The right-hand
column of the function description provides additional information which may be useful but is not absolutely necessary for execution of the function.
If you comply with these hints, you should have no problems in
the operation of your TV set.
Your Metz-Werke
Contents
8.2
Recording with the timer . . . . . . . . . . . . . . . . . . . . . .28
1.
1.1
Remote control handset RB 11 . . . . . . . . . . . . . . . . .3
Setting up and connecting . . . . . . . . . . . . . . . . . . . .4
Turning the TV on and off . . . . . . . . . . . . . . . . . . . . . . .5
9.
Connecting headphones . . . . . . . . . . . . . . . . . . . . .29
Adjusting the headphones volume . . . . . . . . . . . . . . .29
2.
2.1
2.2
Language selection in the TV menu . . . . . . . . . . . . .6
TV menu and operator help . . . . . . . . . . . . . . . . . . . . .6
Programme selection . . . . . . . . . . . . . . . . . . . . . . . .6, 7
10.
3.
3.2
3.3
Presetting TV stations . . . . . . . . . . . . . . . . . . . . . . . .8
Direct channel entry/station search . . . . . . . . . . . . . . .8
Autostore function . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Sorting stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Move, exchange, copy, delete . . . . . . . . . . . . . . . . . .10
Fine tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Allocating a station logo . . . . . . . . . . . . . . . . . . . . . . .12
4.
4.1
4.2
Changing individual picture settings . . . . . . . . . . .13
Changing individual sound settings . . . . . . . . . . . . . .13
Adjusting the video and audio standard values . . . . . .14
Megatext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Basic functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Multiple pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Direct page selection . . . . . . . . . . . . . . . . . . . . . . . . .33
Return to last index page . . . . . . . . . . . . . . . . . . . . . .34
Doubling the font size . . . . . . . . . . . . . . . . . . . . . . . . .35
Setting marks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Mark-by-mark advance . . . . . . . . . . . . . . . . . . . . . . .38
Erasing marks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Riddle solutions key . . . . . . . . . . . . . . . . . . . . . . . . . .40
11.
5.
Equipment configuration . . . . . . . . . . . . . . . . . . . . .15
Assigning the function keys . . . . . . . . . . . . . . . . . . . .15
Setting for programme change . . . . . . . . . . . . . . . . . .17
Setting the RGB priority . . . . . . . . . . . . . . . . . . . . . . .18
Volume adaptation . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Special picture effects . . . . . . . . . . . . . . . . . . . . . . .41
Variable Zoom (not for Gemini) . . . . . . . . . . . . . . . . . .41
Frame freeze / Picture format . . . . . . . . . . . . . . . . . . .42
Format 4:3 / 16:9 function (only Gemini) . . . . . . . . . .43
Zoom (only Gemini) . . . . . . . . . . . . . . . . . . . . . . . . . .43
Grey value of side bars (only Gemini) . . . . . . . . . . . . .44
12.
Operation without remote control . . . . . . . . . . . . . .44
13.
Connecting peripheral equipment . . . . . . . . . . . . . .45
Connecting a video recorder / camcorder . . . . . . . . . .45
Connecting external devices . . . . . . . . . . . . . . . . . . . .46
Connecting a video recorder . . . . . . . . . . . . . . . . . . . .47
Video recorders/video signal . . . . . . . . . . . . . . . . . . .48
Video recorders . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Pay TV decoder (e.g. Premiere) . . . . . . . . . . . . . .50, 51
3.1
6.
6.1
Volume adjustment and forced mono . . . . . . . . . . .19
Correcting picture deviations . . . . . . . . . . . . . . . . . . .20
Noise reduction and CTI function . . . . . . . . . . . . . . . .20
Picture format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
7.
AV recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Camcorder ➜ video recorder . . . . . . . . . . . . . . . . . . .22
Video recorder ➜ video recorder . . . . . . . . . . . . . . . .23
8.
Time settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Switch-on/off and reminder time . . . . . . . . . . . . . . . .24
Childlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Switching on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Permitted programmes . . . . . . . . . . . . . . . . . . . . . . .26
Personal code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Beginning and end of viewing period . . . . . . . . . . . . .27
Switching off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
8.1
2
14. Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
14.1 Upgrade kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
14.2 Maintenance and care . . . . . . . . . . . . . . . . . . . . . . . .52
15.
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
16.
Remote control handset for video recorders . . . . .54
17.
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Remote control handset RB 11
The remote control sends commands to the TV set with the aid of infrared light. For this reason, you should always point the remote control at
the TV set for reliable operation. Use of the remote control may interfere with the operation of other devices or systems controlled which use
infrared light (such as infrared headphones).
If the TV set is exposed to direct sunlight, it may sometimes not function correctly because it cannot recognise the commands transmitted by
remote control.
The television must be switched on or in standby mode (ON/OFF key depressed) when it is to be operated by remote control. Always point the
remote control in the direction of the TV for operation. A pilot lamp starts to flash as soon as a key on the remote control handset is pressed.
Nota:
For explanation of the video level for
the remote control of video recorders,
please refer to Section 16, page 54.
Do not point the remote control unit into your eyes and
press a key on it !
RB 11
100 Hz
Do not use rechargeable batteries in the remote control
unit.
• Preselect with entry of two digits
• Cursor page selection in Megatext mode
VTR
1
2
3
4
5
6
7
8
9
• Mute
-/--
• Changing the setting
P+
ľľ
OK
-
Pı
TV
• Call TV menu
MENU
ı
• Operator Help
?
ľľ
ɚ
B
REC
ıı
Ȅ
• IInfotext (select marks)
ķ INFO
• Return to last programme
PRG.
• Changeover from spoken to
music broadcasts
ɮ
• Still picture
IJ
• Next programme
• Partial page selection with multiple
pages in Megatext
• Select picture function
• Megatext - select subject
• Select sound function
• Megatext - select chapter
A
• Change of format (variable zoom)
ıı
+
• Basic picture and sound settings
• Function keys, depending upon
programming
• Numeric keys
0
TIMER
• Call Megatext
• Return from menu and
Megatext to TV picture
• ON - Set switches to last viewed programme
• OFF (standby setting)
AV
• Call station table
• Megatext - next page
• AV recording
• Megatext - skip to next mark
• Logo display (display of time, programme, and sound mode
• Megatext - set or delete mark
Batteries:
Insert the enclosed batteries in the remote
control, observing the symbols on the
cover of the battery compartment.
Remove exhausted batteries from the
remote control and return them to your
dealer or to an authorised battery collection
point.
3
1. Setting up and connecting
Setting up
When selecting a suitable place for the TV, be sure that no bright
light or sunlight falls on the screen. Light may cause reflections
and impair the brilliance of the image.
The best viewing distance is five times the picture tube diagonal,
e.g. about 3.5 m for TV sets with a 70 cm screen.
5 x cm
cm
y
y
Connecting the aerial
TV sets require adequate ventilation. The ventilation
slots at the rear of the set should therefore never be
covered by curtains, doilies, newspapers or similar
objects. Likewise, all slots at the bottom of the set
must be freely accessible so that the intake of air is
not impaired in any way
Standard SAT and terrestrial station aerial sockets are fitted at
the rear of the TV.
Thunderstorms represent a danger for all electrical appliances! If
lightning strikes the power line or the aerial, the TV may be
damaged even if it is switched off. Therefore, always unplug the
mains lead AND aerial during thunderstorms. If the TV is not
going to be used for an extended period of time, for instance
when on holiday, then disconnect the set both from the mains
and the aerial.
Aerial connection
Do not set up the TV near a radiator as this would
impair adequate cooling.
Do not place
- burning candles or
- flower vases filled with water
on top of the TV set.
Hot wax and liquids destroy the electrical components
and jeopardize the electrical safety of the set
5 cm
10 cm
20 cm
698-3EURO
10 cm
Mains voltage
y
If you place the set in a wall unit, leave sufficient space
on all sides so that the air can circulate freely.
Your TV set is intended for use in dry rooms. If you wish
to use it occasionally outdoors, be sure to protect it
against any kind of moisture (rain, splashes, dew, etc.).
4
Plug the mains lead into a wall
outlet. The TV set is equipped for
230 V ac.
1.1 Turning the TV on and off
Turning on with the ON/OFF key
Turning on with the remote control
Before turning on a cold TV in a warm room, first
allow any condensation mist that may have formed
on the screen to evaporate.
Press the ON/OFF key.
The programmes can be directly selected with the 0-9 keys
when the television is in standby mode.
Select single-digit programme numbers by pressing the corresponding numeric key.
Two-digit programme numbers are entered with the -/-- preselect key:
• The television is switched to the last watched programme.
• The preselect box is displayed on the screen.
Programme position 1 is then selected. Depending on the assignments made, the following information will appear in the screen
box:
SAT programme position
Terrestrial
(only with built-in
programme position
SAT upgrade module)
Pr 1
ARD
MONO
PS 1
• The 2-digit programme number can now be entered with the
numeric keys.
MONO
ARD
18:15:33
Pr - -
18:15:33
The last programme watched before the television was switched
off can be set with the
key.
The television is automatically set to standby mode ten minutes
after station closedown. However, this is not the case if the station
starts to transmit a test card within these ten minutes.
Turning off with the ON/OFF key
Press the ON/OFF key. The television is now disconnected from
the mains.
Turning off with the remote control
You are advised to turn off the TV with the ON/OFF key after station
closedown and when it is not going to be used for an extended
period of time.
Press the
key to switch the TV to standby mode.
The standby status is indicated by the red lamp.
2. Language selection in the TV menu
1. Call the Equipm.
Configuration menu
The screen displays
MENU
return
TV
Explanation
TV picture
?
Help
MENU
red
green
2. Adjust the language
blue
1
2
3
4
5
6
7
8
9
--/-
0
yellow
Function keys
Device connection
Press the OK key to confirm and store the selection
made. The complete text in the TV menu is then displayed in the selected language.
P+
+
OK
Select the desired language with the
keys when
the submenu for the language is displayed on a green
background.
+
Equipm. configuration
The desired language for the entire TV menu is adjusted in the „Equipm.Configuration“ menu.
-
Press this key on the remote
control....
white
SAT settings
green
Language:
-
P-
-
TV
+
MENU
?
English
A
B
REC
Ȅ
AV
red
3. Store the selected language
698-06N-GB
further
store?
OK
OK
4. Return to TV picture
TV
TV picture
5
2.1 TV menu and operator help
Menu control of the TV, and the versatility of the system, ensure that supposed complicated settings and entries are made easily and
clearly comprehensible for everyone. Operator Help can be called with the ? key when in TV mode. Operator Help indicates the
functions of the individual keys.
All settings are entered by way of different submenus. Simply call Operator Help with the ? key should you encounter difficulties in
entering the different equipment configurations or if problems arise in operating the TV. Operator Help is specifically matched to the
corresponding menu and functions as a reminder when settings are entered or programmed.
Press this key on the remote
control....
The screen displays
Explanation
?
Operator Help: Call/exit
Operator help
3
5
6
7
8
9
--/-
0
Ȅ
-
P-
TV
TV
MENU
MENU
?
A
A
B
Ȅ AV
Ȅ
B
Operator Help shows the functions of the individual
keys when in TV mode.
The A and B function keys can be programmed by the
user. Consequently their functions can differ to those
shown in the adjoining picture.
Station table
AV recording
Program/time of day
Teletext/TV picture
TV-menu
MUTING - 12DB
Zoom 2:1
Infotext
AV
+
OK
Switch set on/off
-/-- (2 dig.)
Prog select
Next programme
Basic video/audio settings
Sound interrupt
Change vol./adj. function
/
Sel.video/audio funct.
OK
-
2
4
9
P-
+
1
0
P+
P+
?
return
REC
last program.
Var. format
IJŀ
PRG
698-HELP1-GB
return
MENU
ɮ
ɳI I 1-2
Spch/mus.
Still
picture
TV
Help
?
TV menu: Call/exit
TV-menu
Video standard values
9
yellow
Audio standard values
+
white
Station settings
green
Timer/childlock
red
Equipm. configuration
2
3
4
5
6
7
8
--/-
0
Settings in the submenus can be changed
with the
keys.
-
P+
-
OK
P-
MENU
Press the OK key to confirm and store the
new setting.
TV
MENU
?
+
blue
1
The individual menu lines are selected with the coloured keys of the remote control, to open the corresponding submenu. Keys not enhanced in white or colour
on the displayed menu have no function in the current
operating state.
A
B
REC
Ȅ
Press the MENU key to move back by one
step within the TV menu.
AV
698-01-GB
Operator Help in TV menu:
Call/exit
return
MENU
picture
TV
?
return
TV-menu
Operator help
1
2
3
4
5
6
7
8
9
--/-
0
?
Change/store luminance, contrast, etc.
Change/store volume
treble, etc.
P+
Define program
assignments
+
OK
-
PTV
MENU
AV
?
A
B
REC
Ȅ
AV
REC
698-HELP2-GB
6
Ȅ
Timer settings/
childlock
TV/SAT-configuration,
settings function
keys, menu language
Operator Help can be called for each menu displayed
on the screen (Example: Operator Help with displayed
TV menu).
2.2 Programme selection
Press this key on the remote
control....
The screen displays
Explanation
1. Select the programme
position (e.g. Prog
number 10)
-/--
1
Press the -/-- key when the TV is in standby mode.
The TV then switches to the programme viewed before
the receiver was turned off to standby.
Now enter the programme number with the numeric
keys. The TV is changed over to the selected programme
position as soon as the last digit has been entered.
With single-digit programme numbers it is only necessary to press the corresponding key, e.g. key 4 for programme position 4.
After the programme position has been selected an
information box appears indicating the programme
position number, the time, and the currently valid
sound mode, e.g. stereo.
0
Pr - -
2. Next programme
Press the P P- keys to run through the programmes. Keeping the P or P- key depressed for more
than 2 seconds will cause a programme box to be displayed on the screen for selection of the programme
position. Release the P or P- key as soon as the
desired logo is highlighted in white. The corresponding
programme position will then be selected.
+
P+
Pr 13 MONO
P-
3. Last programme
PRG.
RTL
ZDF
BR3
RTL
SAT1
RTL2
PRO7
EUSPO
NTV
NORD3
MDR3
SWF3
+
+
18:15:33
With this key, you can switch back and forth between
the last two programme positions you selected.
Example:
You are watching a programme on ITN; during the
commercials, you switch to BBC with the aid of the
numeric keys . .
You can now switch back and forth between ITN and
BBC by pressing the PRG. key.
7
3. Presetting TV stations
Direct channel entry/
station search
The TV is supplied with factory preprogrammed TV stations. However, if you can receive TV stations in your area that are not listed in the
station table, then these transmitters can be entered and programmed at any time.
You can choose one of the following three programming possibilities:
a) Direct channel entry
b) Station search
c) Autostore function
Press this key on the remote
control....
The screen displays
MENU
1. Call the station table and
channel type survey
return
TV
picture
Explanation
?
Help
Station table
Prog
Logo
▲▼
0
1
2
3
4
5
6
7
8
9
yellow
Channel
Signal
VTR1
00 Video Rec.1
ARD
06
Aerial
ZDF
34
Aerial
SAT 1
40
Aerial
blue Std channel
06
ARD
yellow Spec. channel
SAT-TV
SAT-RADIO
red Fine tuning
>> weitere Einstellungen
Std., Pict., Sound
698-03A-GB
MENU
2. Select the type of channel
(e.g. standard channel)
return
TV
picture
?
Help
Station table
Prog
Logo
▲▼
0
1
2
3
4
5
6
7
8
9
blue
Channel
Signal
VTR1
00 Video Rec.1
ARD
06
Aerial
ZDF
34
Aerial
SAT 1
40
Aerial
blue Std channel
06
ARD
yellow Spec. channel
SAT-TV
SAT-RADIO
red Fine tuning
>> weitere Einstellungen
Std., Pict., Sound
With direct channel entry it is necessary to know the
type of channel and the channel number.
If type and number of channel are not known, you can
scan through the entire reception range with the
search function to locate stations.
The station table lists all the preset stations.
These stations can be changed at any time.
The cursor always highlights the type of channel currently preset in the given programme position.
For the search function it is advisable to switch to a
vacant programme position.
The yellow framed field offers four types of channels.
Select the channel type with the assigned coloured
key.
After the channel type has been selected, a channel
number is displayed in the bar when a station is stored
in this programme position. Two lines are shown if this
position is still vacant.
„SAT channel“ and „SAT radio channel“ can only be
selected if a SAT upgrade module has been installed in
the TV receiver.
698-03A-GB
return
or
?
+
0
1
2
3
4
5
6
7
8
9
Logo
Channel
Signal
store?
-
OK
4. Store the setting and return
to TV picture
8
TV
With direct channel entry, the station table is briefly
faded out when the channel number is entered, and
the selected station is displayed.
The station search proceeds from the displayed
channel number in a forward sequence with the
key, and in a reverse sequence with the
key.
Search proceeds from the lower channel area
upwards or downwards when two lines are displayed.
The search stops when a station has been found.
Proceed as described in step 4 if the located station is
to be stored.
Press the or key if the located station is not to be
stored so that the search can be continued.
+
VTR1
00 Video Rec.1
ARD
06
Aerial
ZDF
34
Aerial
SAT 1
40
Aerial
blue Std channel
06
ARD
yellow Spec. channel
SAT-TV
SAT-RADIO
red Fine tuning
>> weitere Einstellungen
Std., Pict., Sound
6 9 8 - 0 3 A - S T- G B
OK
Help
+
▲▼
6
picture
Station table
Prog
0
TV
-
MENU
-
3. Enter the channel number
(Example: Standard channel
06) or start station search
Complete fine tuning if station reception is not clear
(see Section 3.2).
TV picture
3. Presetting TV stations
Autostore function,
sorted to countries
The autostore function automatically scans through the entire reception range to locate stations. The located stations are presented in the
station table and can then be stored by way of the OK key.
If you do not like the order in which the stations appear in the station table, you can sort the stations to match your own requirements as
described on the next page.
Press this key on the remote
control....
The screen displays
return
MENU
1. Call the menu
„Station settings“
TV
Explanation
picture
?
Help
Station settings
blue
MENU
1
2
3
4
5
6
7
8
9
--/-
0
yellow
Station table
Autostore
P+
SAT programming
+
OK
-
PTV
MENU
?
A
B
REC
Ȅ
AV
698-03B-GB
2. Call the autostore function
and enter a programme
number (e.g. 01)
MENU
return
TV
picture
?
Help
Autostore
Prog
Logo
Channel
Signal
yellow
Press the yellow key to call the autostore function. Use
the numeric keys to enter the two-digit programme
number (e.g. 01) at which the station is to be stored.
After entry of this number, a red box with the text
„Start ?“ is displayed.
sort for
Germany
yellow Austria
white Switzerland
green others
blue
1
2
3
4
5
6
7
8
9
from nr. of progr.
01
start ?
698-03C-SP-GB
OK
0
MENU
return
TV
The TV now scans through the entire reception range.
picture
3. Start the autostore function
Autostore
Prog
Logo
ARD
Channel
Signal
06
Aerial
OK
The first „standard-channel“ station to be found is
shown on the screen after all stations have been located. The channel number and an automatic logo are
displayed. The auto logo only appears for stations
which transmit a VPS signal.
Now proceed as described in Section 3.1 Sorting
stations.
Searching for stations
Ch06
698-03D-GB
9
3.1 Sorting stations
IIn the „Sort“ submenu you can move, exchange, copy, or delete the stationss stored in the programme positions. The „Sort“ submenu is
displayed automatically after the autostore function has found all available stations.
This menu can also be called at any time from the station table display for subsequent modification of the station programming.
Press this key on the remote
control....
The screen displays
MENU
1. Call the „Sort“ submenu
and move the station
return
TV
Explanation
picture
Help
?
Station table
When the „Sort“ submenu is displayed, the function
„Move“ is preset.
Use the P and P- keys to select the programme
position to be modified.
Select one of the functions „move“, „exchange“,
„copy“ or „delete“ with the related coloured key.
If you inadvertently delete a programme position, you
can restore it by pressing the B key.
+
Prog
698-03E-GB
0
1
2
3
4
5
6
7
8
9
blue
yellow
white
green
2. Exchanging two programme
positions
Channel
VTR2
ARD
ZDF
SAT 1
RTL
BR 3
N3
MDR 3
SWF 3
MDR 3
02
06
34
40
36
59
S23
12
45
S05
▲▼
either automatically after autostore
or
A
Logo
MENU
sort
move
change
copy Pr 1 ➔ Pr - Pr 1 delete
return
Prog
4
5
6
7
8
9
0
3. Store the settings
0
1
2
3
4
5
6
7
8
9
698-03F-GB
3
TV
picture
Logo
Channel
VTR2
ARD
ZDF
SAT 1
RTL
BR 3
N3
MDR 3
SWF 3
MDR 3
02
06
34
40
36
59
S23
12
45
S05
▲▼
2
Video Rec.2
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Help
?
Station table
yellow
1
Signal
Signal
Video Rec.2
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
sort
move
Pr1 ➔ Pr - exchange
Pr1 ➔ Pr - white copy
Pr 1 ➔ Pr - green Pr 1 delete
return
TV
picture
?
Help
Station table
▲▼
698-03F-SP-GB
TV
10
The selected function is executed as soon as you
enter the new number.
blue
Prog
4. Return to TV picture
The blinking hyphen on the right of the sub-menu now
prompts you for input of a programme position number.
yellow
MENU
OK
When moving, exchanging or copying a programme
position, the new programme position must be selected
by entering two digits on the numeric keys.
0
1
2
3
4
5
6
7
8
9
Logo
Channel
VTR2
ARD
ZDF
SAT 1
RTL
BR 3
N3
MDR 3
SWF 3
MDR 3
02
06
34
40
36
59
S23
12
45
S05
Signal
Video Rec.2
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
sort
move
Pr1 ➔ Pr - exchange
Pr1 ➔ Pr - white copy
Pr 1 ➔ Pr - store?
green Pr 1 delete
OK
blue
yellow
After the contents of a programme position have been
moved, exchanged, copied or deleted, a red store box is
displayed to ask if you want to store the new settings.
Press the OK key to store the new settings or press
the TV key to abort the operation.
3.2 Fine tuning
The individual channels are automatically tuned to channel centre for station tuning. As a rule, this automatic tuning will be sufficient.
Apply manual fine tuning if automatic tuning does not produce satisfactory results.
Select the programme number at which fine tuning is to be completed.
Press this key on the remote
control....
The screen displays
MENU
1. Select the fine tuning
function
return
Logo
▲▼
0
1
2
3
4
5
6
7
8
9
red
picture
?
Help
The „Fine tuning“ function is only activated when the
red bar is displayed.
Station table
Prog
yellow
TV
Explanation
Channel
Signal
VTR1
00 Video Rec.1
ARD
06
Aerial
ZDF
34
Aerial
SAT 1
40
Aerial
blue Std channel
06
ARD
yellow Spec. channel
SAT-TV
SAT-RADIO
red
Fine tuning
>> weitere Einstellungen
Std, Pict., Sound
698-03G-GB
2. Adjust the fine tuning
-
Std channel
06
ARD
Spec. channel
SAT-TV
SAT-RADIO
red
Fine tuning
>> weitere Einstell ngen
blue
+
Adjust fine tuning within the range of -99 to +99 with
the
keys.
The station table is blanked out for better picture
assessment.
yellow
-
+
store?
OK
3. Store the fine tuning and
return to TV picture
Once the station is correctly tuned, press the
to store the new setting.
OK
key
OK
TV
11
3.3 Allocating a station logo
A logical logo consisting of up to 5 characters can be allocated to each station. The station RTL 2, for example, can be allocated the logo
RTL 2.
Manual logo allocation is not necessary with most stations. The corresponding station logo appears a few seconds after the picture when
a station is selected by direct channel entry. However, an automatic logo only appears for stations which transmit a VPS signal.
Press this key on the remote
control....
The screen displays
MENU
return
TV
Explanation
TV picture
?
Help
1. Call the logo menu
TV station table
Prog
Logo
▲▼
Channel
Signal
0
E1 FBAS
Logo:
1
Antenne
2
Antenne
VW
3 A B C D E F G H I J K L M N O P Q R S T UAntenne
4
Antenne
5 XYZ
Antenne
0123456789
!+6
Antenne
P
select
7
Antenne
8
Antenne
P9
Antenne
white
The logo is automatically displayed if the selected programme position already has a logo. The field remains
blank if a logo has not yet been allocated.
Any existing logo will be overwritten.
+
blue
-
+
next number
698+03H-GB
MENU
return
TV
TV picture
Help
?
Select the desired character (in our example the letter
R) with the keys
, P , P- .
-
TV station table
Prog
Logo
▲▼
Channel
Signal
+
2. Select the first character
+
This will overwrite any existing logo.
0
E1 FBAS
R
1 Logo:
Antenne
2
Antenne
VW
3 A B C D E F G H I J K L M N O P Q R S T UAntenne
4
Antenne
5 XYZ
Antenne
0123456789
!+6
Antenne
P
select
7
Antenne
8
Antenne
P9
Antenne
P+
-
+
P-
+
-
+
next number
store?
698+03I-GB
OK
3. Move the cursor to the
second position and select
the second character
MENU
return
Logo
?
Help
Channel
Signal
The cursor is moved within the logo field with the blue
key.
Select the desired character (in our example the letter
T) with the keys
, P , P- .
+
-
Repeat this procedure to enter the entire logo.
+
+
-
-
+
0
E1 FBAS
Logo: R T
1
Antenne
2
Antenne
VW
3 A B C D E F G H I J K L M N O P Q R S T UAntenne
4
Antenne
5 XYZ
Antenne
0123456789
!+6
Antenne
P
select
7
Antenne
8
Antenne
P9
Antenne
+
▲▼
P+
TV picture
TV station table
Prog
blue
TV
next number
P698+03J-GB
4. Store the setting and return
to TV picture
OK
12
TV
After input of the desired logo, press the
store it.
TV picture
OK
key to
The programmed logo automatically appears in the
station table.
4. Changing individual picture settings
The screen displays
Explanation
Luminance
OK
+
40 change:
-
1. Adjusting the luminance
Press the
tion.
key to display the last adjusted func-
Continue pressing the
key until the picture setting value to be changed is displayed.
Contrast
OK
+
40 change
+
-
Adjust the required value with the
-
Press this key on the remote
control....
keys.
OK
-
OK
+
+ 40 change
-
+
Chrominance
Sharpness
+
R 02 change
694-00E-GB
Press the
key a number of times until the contrast field is displayed on the screen.
+
Adjust the required value with the
-
-
2. Adjusting the contrast
keys.
+
Chrominance and sharpness are adjusted in the
same manner.
-
4.1 Changing individual sound settings
The screen displays
Explanation
Volume
OK
+
30 change:
-
1. Adjusting the volume
OK
+
-
+ 25 change
key to display the last adjusted func-
Continue pressing the
key until the volume field
is displayed on the screen.
Treble
-
Press the
tion.
+
Adjust the required value with the
-
Press this key on the remote
control....
keys.
+
Bass
-
+ 25 change
OK
+
Press the
key a number of times until the treble
field is displayed on the screen.
2. Adjusting the treble setting
Balance
OK
-
change
+
+
On/Off
keys.
Bass, balance, sound effects and speaker soundmode settings are adjusted in the same manner.
Sound effects
Spatial sound
Adjust the required value with the
+
R 00 change
+
L
-
-
-
-
Sound-mode speaker
-
change
+
Mono/Stereo/Chann.1/Chann.2
695-D-GB
Vo l u m e
OK
+
change
-
3. Sound mute
695-DX-GB
Press the
key to mute the sound.
Renewed depression of the
key resets the sound
to the previously adjusted volume.
Note: All settings modified in this menu can be stored by calling the „Video standard values“ or „Audio standard values“ menu respectively and pressing the OK key. The stored values can be recalled at any time with the OK key.
13
4.2 Adjusting the video and audio standard values
Press this key on the remote
control....
The screen displays
return
MENU
Explanation
picture
TV
?
Help
Press any coloured key to step through the submenus.
Pressing the blue key selects the „Video standard
values“ submenu, pressing the yellow key selects the
„Audio standard values“ submenu
Help
Luminance, contrast, chrominance and tint* can be
adjusted in the „Video standard values“ submenu.
Select the menu line with the value to be changed by
pressing the assigned colour keys.
1. Call the TV menu
TV-menu
blue
Video standard values
9
yellow
Audio standard values
+
white
Station settings
green
Timer/childlock
red
Equipm. configuration
1
2
3
4
5
6
7
8
--/-
0
MENU
P+
-
OK
P-
TV
MENU
?
A
B
REC
Ȅ
AV
698-01-GB
return
MENU
picture
TV
Video standard values
1
2
3
4
5
6
7
8
9
--/-
0
blue
Luminance
yellow
Contrast
40
50
P+
+
-
+
-
OK
Chrominance
white
P-
36
TV
MENU
Tint
-
A
B
REC
Ȅ
+ 00
* (only if a multi-standard upgrademodule has been
installed)
The volume, treble, bass and balance settings, as well
as the headphones volume, can be adjusted in a similar manner in the „Audio standard values“ submenu.
Adjust the desired value with the
keys.
+
?
OK
?
-
2. Example 1: Call the „Video
standard values“ submenu. Adjust and store
the luminance.
AV
Sharpnes
red
02
698-04A-GB
3. Example 2: Call the „Audio
standard values“ submenu. Adjust and store
the volume.
MENU
store?
return
picture
TV
?
Help
Audio standard values
blue
1
2
3
4
5
6
7
8
9
yellow
--/-
0
+
white
Volume
48
Treble
-
+ 23
P+
OK
-
-
+
P-
-
+ 42
Balance
green
?
OK
Bass
TV
MENU
-
A
B
REC
Ȅ
+ 00
AV
red
Volume headphones
65
698-04B-GB
store ?
OK
4. Return to TV picture
TV
14
If no other video standard values or audio standard
values are to be changed, then press the OK key to
store the new setting.
The red store box disappears when the
pressed.
OK
key is
5. Equipment configuration
Assigning the
function keys
The remote control handset has two factory programmed function keys A and B. Press the ? key in normal television mode to reveal the
factory programming. The displayed Operator Help text describes the current programming in the last-but-one paragraph. This programming
can be changed according to your requirements in conformity with the displayed selection. This choice is described in the „Glossary“ chapter.
Example of programming function key B:
In TV mode, the B key is to activate the „subtitles“ function; in Megatext mode, you can use it for the „page stop“ function.
Press this key on the remote
control....
The screen displays
MENU
1. Call the „Equipment
configuration“ menu
MENU
return
TV
Explanation
picture
?
Help
Equipm. configuration
1
2
3
4
5
6
7
8
9
--/-
0
blue
Function keys
yellow
Device connection
P+
SAT settings
+
-
OK
P-
red
TV
MENU
?
green
Language:
red
further
English
A
AV
B
REC
Ȅ
698-05A-GB
MENU
2. Call the „Function keys“
menu
return
TV
picture
Function keys
?
Functions
Help
▲
▼
Television
blue
1
2
3
4
5
6
7
8
--/-
0
9
A
B
TV
TV
Muting -12dB
Reveal text
Pict. format
Large letters
P+
+
-
OK
P-
TV
MENU
?
A
AV
B
REC
Ȅ
no function
Subtitles
Large subt.
Pict. format
Comb filter
Zoom 2:1
Sound-effects
Stereo/ch. 1-2
Muting -12dB
The left-hand side of this menu shows the currently
valid programming of the function keys.
The window on the right-hand side indicates the
selection that can be programmed.
The individual functions are explained in detail in
the „Glossary“ on page 53.
698-05M-GB
B
MENU
return
TV
picture
Function keys
?
Functions
Help
▲
▼
Television
1
2
3
4
5
6
7
8
9
--/-
0
P+
OK
+
-
3. Press the function key to be
programmed (in this example: B key)
PTV
MENU
?
A
AV
B
REC
Ȅ
A
B
TV
Muting -12dB
Reveal text
TV
Pict. format
Large letters
no function
Subtitles
Large subt.
Pict. format
Comb filter
Zoom 2:1
Sound-effects
Stereo/ch. 1-2
Muting -12dB
VTR operation
Two functions can be programmed for function key B.
The upper line indicates the function programmed for
TV mode, the lower line the function programmed for
Megatext mode.
Press the TV key to switch between the two lines.
Press the B key to display the currently programmed
function.
698-05N-GB
15
5. Equipment configuration
Press this key on the remote
control....
4. Select the function for TV
mode (in this example
„Subtitles“)
The screen displays
MENU
return
TV
?
▲
▼
Functions
1
2
3
4
5
6
7
8
9
--/-
0
A
B
TV
TV
Muting -12dB
Reveal text
no function
Subtitles
Subtitles
Large letters Large subt.
-
OK
P-
TV
MENU
?
A
B
REC
AV
Ȅ
Select the function in the right-hand field with the P
or P- key. The text on the left-hand side changes as
soon as the cursor (a white bar) is moved.
+
If the function „Subtitles“ has been programmed for
key B, the subtitles will be displayed when the TV set
is switched, if subtitles are actually transmitted with
the programme.
Logo
Pict. format
Zoom 2:1
Sound-effects
Stereo/ch. 1-2
Muting -12dB
+
P+
Help
Television
P+
P-
Explanation
picture
Function keys
Assigning the
function keys
store ?
696-05O-GB
OK
5. Switch to Megatext mode
and program the function
keys
MENU
return
TV
picture
?
2
3
4
5
6
7
8
9
--/-
0
TV
A
B
▲
▼
Functions
Function keys
1
Help
TV
Muting -12dB
Reveal text
TV
Subtit.
Stop page
Videotext
no function
Reveal text
Large letters
Stop page
P+
+
-
OK
P-
TV
MENU
?
P-
P+
A
B
REC
Ȅ
AV
store ?
698-05P-GB
OK
6. Store the assignments and
return to the „Equipment
Configuration“ menu
OK
MENU
return
TV
picture
?
Equipm. configuration
1
2
3
4
5
6
7
8
9
--/-
0
blue
Function keys
yellow
Device connection
P+
OK
SAT settings
+
-
MENU
PTV
MENU
?
green
Language:
red
further
A
AV
B
REC
Ȅ
698-05A-GB
7. Return to TV picture
TV
16
English
Help
The cursor (a white bar) is now located in the second
line, on the currently programmed function.
The desired Megatext functions can now be programmed
in the sequence described in steps 3 and 4, above.
5. Equipment configuration
Press this key on the remote
control....
The screen displays
return
TV
Explanation
picture
?
Help
Prog. change settings
Yes
9
yellow
Spat. sound on PC :
Off
white
Stereo wide on PC :
Off
2
3
4
5
6
7
8
--/-
0
In the first line of the menu, use the
keys to select
whether the mute function is to be retained („Yes“) or
to be cancelled („No“) when you change programmes.
+
No sound on PC :
+
MENU
blue
1
In this menu you can define the sound functions for a
programme change.
-
MENU
1. Call the settings for
programme change
Settings for
programme change
P+
-
OK
P-
2x red
The new settings can be stored by pressing the
key.
TV
MENU
?
A
2x
B
blue
REC
Ȅ
OK
AV
store ?
698-05C-GB
OK
picture
?
Help
Prog. change settings
blue
No sound on PC :
Yes
9
yellow
Spat. sound on PC :
Off
+
yellow
TV
white
Stereo wide on PC :
Off
1
2
3
4
5
6
7
8
--/-
0
P+
-
OK
P-
Use the
keys in this menu line to define whether
the spatial sound is to be switched on or off when the
programme is changed to a monaural station.
-
return
+
MENU
2. Set spatial sound when
changing programmes
When in mono mode, you can change over to spatial
sound by pressing a self-defined function key (sound
effects).
If no other values are to be changed, then press the
OK key to store the new setting.
TV
MENU
?
-
A
+
B
REC
Ȅ
AV
The term „spatial sound“ is explained in the section
„Glossary“ on page 53.
store ?
698-05D-GB
OK
picture
?
Help
Prog. change settings
blue
No sound on PC :
Yes
9
yellow
Spat. sound on PC :
Off
+
white
TV
white
Stereo wide on PC :
Off
1
2
3
4
5
6
7
8
--/-
0
P+
OK
Use the
keys in this menu line to select whether
stereo wide is to be switched on or off when the programme is changed to a stereo station.
When in stereo mode you can change over to stereo
wide by pressing a self-defined function key (sound
effects).
-
P-
+
TV
If no other values are to be changed, then press the
OK key to store the new setting.
MENU
?
-
A
B
REC
Ȅ
AV
698-05E-GB
store ?
OK
4. Store the settings and
return to TV picture
OK
-
return
+
MENU
3. Select stereo wide when
changing program
The term „stereo wide“ is explained in the Section
„Glossary“ on page 53.
TV
17
5. Equipment configuration
Press this key on the remote
control....
1. Call the „Equipment
configuration“ menu
MENU
MENU
return
TV
Explanation
picture
?
Help
Equipm. configuration
1
2
3
4
5
6
7
8
9
--/-
0
red
blue
Prog. change settings
yellow
RGB priority:
Yes
white
Sound settings:
Yes
P+
-
OK
+
2x
The screen displays
RGB priority
Volume adaptation
PTV
MENU
?
A
B
REC
Ȅ
AV
store ?
OK
698-05B-GB
MENU
return
TV
picture
?
Help
2. Set the RGB priority
The RGB priority must be set to Yes if a Pay-TV decoder (Premiere) is to be connected to the TV.
Equipm. configuration
2
3
4
5
6
7
8
9
--/-
0
blue
Select the setting Yes or No with the
Prog. change settings
yellow
RGB priority:
Yes
white
Sound settings:
Yes
Store the new settings with the
OK
-
1
+
yellow
keys.
key
P+
+
-
OK
P-
-
TV
+
MENU
?
A
B
REC
Ȅ
AV
store ?
OK
698-05F-GB
MENU
3. Activate and deactivate the
volume adaptation
white
return
TV
picture
?
Equipm. configuration
1
2
3
4
5
6
7
8
9
--/-
0
blue
Prog. change settings
+
yellow
RGB priority:
Yes
white
Sound settings:
Yes
P+
+
OK
-
-
PTV
MENU
?
A
B
REC
Ȅ
AV
store ?
OK
698-05G-GB
4. Store the settings and
return to TV picture
OK
18
TV
Help
Some stations transmit commercials at a higher volume than the normal programme. You can activate an
automatic volume adaptation function so that you do
not have to adjust the volume with the remote control
each time.
When this function is active, differences in the volume
are automatically equalised.
The setting you select here applies to all programme
positions.
6. Volume adjustment and forced mono
It is possible for TV stations to be received at different volume levels although the volume level settings on the individual programme
positions are identical. To overcome this problem, you can set a volume correction factor for each programme position.
Example:
Programme 1 is soft: volume value 40. Programme 3 is loud: volume value 40. Programme 1 is to be adjusted to the same volume as
Programme 3. Switch over to programme position 1.
Press this key on the remote
control....
The screen displays
TV
picture
?
Help
Station table
Std
Pict.
Sound
VTR1
ARD
ZDF
SAT 1
Auto.
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
white
blue
yellow
Volume adjustment
Forced mono
+00
Off
-
red
-
+
<< weitere Einstellungen
Logo, Channel, Signal
698-06A-GB
store ?
MENU
return
TV
picture
+
OK
2. Set forced mono
?
Help
Station table
Std
Pict.
Sound
VTR1
ARD
ZDF
SAT 1
Auto.
Auto.
Auto.
Auto.
yellow
—
—
—
—
—
—
—
—
blue
-
+
yellow
Volume adjustment
Forced mono
+00
Off
<< weitere Einstellungen
Logo, Channel, Signal
698-06B-GB
It may happen that the TV set inadvertently switches
from mono to stereo during a transmission,
although no stereo programme is being received.
This usually depends upon the prevailing reception
conditions.
Use the
+
Programme
▲▼
0
1
2
3
4
5
6
7
8
9
+
0
1
2
3
4
5
6
7
8
9
+
Programme
▲▼
white
In this submenu, you can assign a volume correction
factor to a programme position and, if necessary,
activate forced mono sound mode.
A volume correction factor can be set with the
keys
when the text is displayed on a blue background.
Press the key to enter a positive correction factor
which is added to the standard volume value (increasing the volume). Press the key to enter a negative
correction factor which is subtracted from the
standard volume value (decreasing the volume).
In our example:
Press the key and increase the volume until it is the
same as the volume on Programme 3. The resulting
correction factor could , for example, be displayed as 05.
-
return
-
MENU
1. Call the sound submenu
and adjust the volume
Explanation
keys to select forced mono.
If this setting is stored, all transmissions received in
this programme position will always be reproduced in
mono.
store ?
OK
3. Store the setting and return
to TV picture
All changed settings are stored.
OK
TV
19
6.1 Correcting picture deviations
It is possible for stations to be received with differing levels of chrominance, picture sharpness and contrast, even though the settings on
the individual programme positions are identical. For this reason, your TV set enables you to correct the value for each programme
position and/or to select a picture correction function (CTI, noise reduction).
Press this key on the remote
control....
1. Call the first picture menu in
the station table and correct
the picture sharpness
The screen displays
MENU
return
TV
Explanation
picture
Help
?
Station table
Programme
▲▼
0
1
2
3
4
5
6
7
8
9
red
yellow
VTR1
ARD
ZDF
SAT 1
blue
Std
Pict.
Sound
Auto.
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
Sharpness
Noise reduction
CTI
Comb filter
further
yellow
white
green
red
The picture menu contains all settings which can
change the picture.
If the pictures received from a station are unsharp, this
function permits you to correct the picture sharpness
for an individual programme position and to store this
adjustment.
The picture sharpness can be changed with the
1
A2
On
On
-
+
<< weitere Einstellungen
store ?
Logo, Channel, Signal
OK
698-06C-GB
MENU
return
TV
2. Switch on the noise
reduction
picture
Help
?
This noise reduction function can be switched on if the
picture contains snow or noise.
Station table
Programme
▲▼
0
1
2
3
4
5
6
7
8
9
yellow
VTR1
ARD
ZDF
SAT 1
blue
Std
Pict.
Sound
Auto.
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
-
+
Sharpness
Noise reduction
CTI
Comb filter
further
yellow
white
green
red
The noise reduction function can be switched OFF or
A1, A2, or A3.
1
A2
On
On
<< weitere Einstellungen
store ?
Logo, Channel, Signal
OK
698-06D-GB
MENU
return
TV
3. Switch on the CTI function
picture
Help
?
Station table
Programme
▲▼
0
1
2
3
4
5
6
7
8
9
white
VTR1
ARD
ZDF
SAT 1
blue
Std
Pict.
Sound
Auto.
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
-
+
Sharpness
Noise reduction
CTI
Comb filter
further
yellow
white
green
red
1
A2
On
On
<< weitere Einstellungen
store ?
Logo, Channel, Signal
OK
698-06E-GB
MENU
return
TV
picture
Help
?
4. Switch on the comb filter
Station table
Programme
▲▼
green
+
0
1
2
3
4
5
6
7
8
9
VTR1
ARD
ZDF
SAT 1
yellow
blue
white
green
red
Std
Pict.
Sound
Auto.
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
Sharpness
Noise reduction
CTI
Comb filter
further
1
A2
On
On
-
<< weitere Einstellungen
store ?
Logo, Channel, Signal
698-06F-GB
20
OK
CTI stands for Colour Transient Improvement and
improves the transitions between different coloured
areas of the picture, making the picture appear much
sharper. The CTI function is effective for both transmissions received by way of the aerial input and for signals
received via the AV sockets. CTI also provides a visible
improvement when playing back from a video recorder.
However, in certain applications (such as playing back
from an S-VHS video recorder), the CTI function may
just have the opposite effect.
When playing back from such recorders, CTI can result
in a lower-quality picture. For this reason, this menu
permits you to switch off the CTI function for specific
programme positions.
The comb filter removes so-called „cross-interference“,
which appears as coloured moiré fringes on striped or
checked patterns in the picture.
The comb filter can be switched on or off for each programme position in the station table.
You can also programme the comb filter on one of the
functions keys in the „Function keys“ menu. You can
then switch the comb filter on and off as desired with
this key.
Use of this function for AV programme positions is not
advisable.
6.1 Correcting picture deviations
5. Call the second picture
menu and adjust
the chrominance
The screen displays
MENU
return
TV
Explanation
picture
Help
?
Station table
Programme
▲▼
red
-
+
0
1
2
3
4
5
6
7
8
9
VTR1
ARD
ZDF
SAT 1
blue
yellow
white
green
red
Std
Pict.
Sound
Auto.
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
Chrom. adjustm.
Col. offset adj.
Contrast adj.
Picture format
VCR
00
0
00
4:3
Off
In this second picture menu, the chrominance, colour
offset and contrast can be corrected individually for
each programme position.
In our example, the chrominance of Programme 1 is to
be diminished. Hold down the
key until the colour
intensity is the same as in programme position 3.
-
Press this key on the remote
control....
The chrominance adjustment range is -15 to +15.
If no other values are to be changed, then press the
OK key to store the new setting.
<< weitere Einstellungen
Logo, Channel, Signal
store ?
698-06G-GB
OK
MENU
return
TV
6. Adjust the colour offset
or contrast
picture
?
Help
Station table
Programme
▲▼
yellow
or
0
1
2
3
4
5
6
7
8
9
white
VTR1
ARD
ZDF
SAT 1
blue
Std
Pict.
Sound
Auto.
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
-
+
Chrom. adjustm.
Col. offset adj.
Contrast adj.
Picture format
VCR
yellow
white
green
red
00
0
00
4:3
Off
Normally, it is not necessary to adjust the colour offset.
However, if external units are connected it is possible
that colour and black-and-white pictures are not accurately superimposed. A similar effect is sometimes
encountered in journals when the black-and-white
and colour impressions do not register, with the result
that the contours are blurred.
The colour offset range is between -3 and +3.
The contrast adjustment range is -15 to +15.
If no other values are to be changed, then press the
OK key to store the new settings.
<< weitere Einstellungen
Logo, Channel, Signal
store ?
698-06H-GB
OK
MENU
return
TV
picture
Help
?
7. Chage the picture format
Station table
Programme
▲▼
green
+
0
1
2
3
4
5
6
7
8
9
VTR1
ARD
ZDF
SAT 1
blue
yellow
white
green
red
Std
Pict.
Sound
Auto.
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
Chrom. adjustm.
Col. offset adj.
Contrast adj.
Picture format
VCR
00
0
00
4:3
Off
-
<< weitere Einstellungen
Logo, Channel, Signal
store ?
698-06I-GB
The picture format of each TV programme position
must be set to 4:3.
If a video recorder with 16:9 format detection is
connected, the picture format of the related programme
position must be set to 16:9.
If a 16:9 input signal is applied to the phono sockets or
the mini-DIN (YC) socket, the picture format must be
changed manually.
An external switching voltage of 4-7 V at the EURO
socket automatically switches the TV to 16:9 format,
provided that the signal type was stored under the
heading „...controls AV operation“ in the menu
„Equipm. configuration, device connection“.
OK
8. Store all settings and return
to TV picture
OK
TV
21
7. AV recording
Camcorder ➜ video recorder
In the „AV recording“ menu, you can define which of the connected peripheral AV devices are to be used for copying a recording.
AV device is a generic term for all external video units, such as video recorders, camcorders,video disk players, photo CD players, etc
which can be connected to a TV.
Example: You wish to copy a film recorded with an S-VHS/Hi8 camcorder to an S-VHS/Hi8 video recorder which is also connected to the
TV set.
Press this key on the remote
control....
The screen displays
MENU
return
Explanation
picture
TV
?
Help
1. Call the AV menu
AV-recording
AV
Input
Output
blue
Video Rec.2
Video Rec.2
yellow
Video Rec.1
Video Rec.1
white
Camcorder
Camcorder
red
Pr. 1: ARD
In the „AV recording“ menu , you can select how the
AV devices connected to your TV set (see Section 13,
„Equipment configuration/Connecting external devices“)
are to be used for copying a recording.
The left side of the menu (Input) shows the devices
which supply picture and sound for the copy operation.
Selection of an input for a programme is meaningful
only for SAT or decorder operation.
The right side of the menu (Output) shows the devices
capable of recording the picture and sound.
no recording
698-07A-GB
A Device connection
MENU
TV
picture
?
Help
AV-recording
blue
Video Rec.2
Video Rec.2
yellow
Video Rec.1
Video Rec.1
white
Camcorder
Camcorder
red
Pr. 1: ARD
Output
yellow
After calling this menu, you must first select the input
device, i.e. the device which is to supply the picture.
Once you have done this, the cursor moves to the output side of the menu and the keys are displayed in
colour. If there is more than one AV device shown on
the output side, you must select the desired device
manually. If you make a mistake, you can switch
between the input and output sides of the menu with
the
keys.
Back to the example:
You want to copy the film from the camcorder to video
recorder 1.
Press the white key to display the signal from the
camcorder on the screen. Then press the yellow key to
select the output device.
-
EURO3:
EURO2:
Video Camcorder ➜ Video Rec.1 Video
698-07B-GB
record ?
A Device connection
OK
+
Input
+
white
return
-
2. Select the desired AV devices (in this example: Camcorder and Video Rec. 1)
3. Store the settings and clear
the menu
The copy operation with the selected devices is now
active.
OK
If any subsequent switching operations could interfere
with copying, a warning box with the text „AV recording“ will be displayed and the requested switching
operation will not be executed.
To check the progress of the operation, press the AV
key to display the picture from the input device on the
screen.
TV
4. Terminate or abort the
copy operation
AV
22
OK
If you wish to execute the copy operation in standby
mode, you can switch the TV set to this mode by pressing the
key.
7. AV recording
Video recorder ➜ video recorder
Example: You wish to copy a film from video recorder 1 to video recorder 2.
Press this key on the remote
control....
The screen displays
MENU
return
TV
Explanation
picture
Help
?
1. Call the AV menu
AV-recording
AV
Input
Output
blue
Video Rec.2
Video Rec.2
yellow
Video Rec.1
Video Rec.1
white
Camcorder
Camcorder
red
Pr. 1: ARD
no recording
698-07A-GB
A Device connection
yellow
MENU
return
TV
picture
?
Help
AV-recording
-
2. Select the desired AV device
(in this example:
video rec. 1)
Input
Output
blue
Video Rec.2
Video Rec.2
yellow
Video Rec.1
Video Rec.1
white
Camcorder
Camcorder
red
Pr. 6: RTL2
After calling the menu, you must first select the input
device which is to supply the picture. In our example,
you select video rec. 1 by pressing the yellow key.
Once you have done this, the cursor moves to the output side of the menu and video rec. 2 is selected automatically, since there is no other choice.
If, however, there were a further video recorder
connected to the EURO 3 socket, you would have to
select the desired device with the related key.
EURO2:
EURO1:
Video Video Rec.1 ➜ Video Rec.2 Video
698-07C-GB
record ?
A Device connection
OK
The copy operation with the selected devices is now
active.
3. Store the settings and
clear the menu
OK
If any subsequent switching operation could interfere
with copying, a warning box with the text „AV recording“ will be displayed and the requested switching
operation will not be executed.
TV
To check the progress of the operation, press the AV
key to display the picture from the input device on the
screen.
If you wish to execute the copy operation in standby
mode, you can switch the TV set to this mode by pressing the
key.
4. Terminate or abort the
copy operation
AV
OK
TV picture
23
Switch-on/off and
reminder time
8. Time settings
In the „Time settings“ menu, you can enter settings which will instruct the TV to switch itself on or off, and to display a reminder at a given time.
Switching from summer time to winter time and vice versa is carried out automatically by the teletext clock.
The switch-on time function will automatically turn on the TV at the preset time if the television is in standby mode. The switch-off time
function will automatically switch it off as desired. The reminder service is intended to help you remember things which you have to do
later on, for instance a telephone call. All three settings can be jointly programmed.
Example: The TV is to switch itself on at 20:00 hr, remind you of something at 21:45 hr, and switch itself off at 23.30 hr.
Press this key on the remote
control....
The screen displays
MENU
1. Call the „Time settings“
menu
TV
picture
?
Help
Time settings
blue
Switch-on time:
Off
9
yellow
Switch-off time:
Off
+
MENU
return
Explanation
white
Reminder time
-- : --
green
Time of day:
08 : 22
1
2
3
4
5
6
7
8
--/-
0
The adjoining picture shows the appearance of the
„Time settings“ menu when no times have been programmed.
P+
-
green
OK
P-
TV
MENU
?
A
blue
B
REC
Ȅ
AV
698-08A-GB
TV
picture
?
Help
blue
Switch-on time:
20:00
9
yellow
Switch-off time:
Off
white
Reminder time
-- : --
green
Time of day:
08 : 22
1
2
3
4
5
6
7
8
--/-
0
P+
OK
-
P-
MENU
?
B
REC
0
0
0
698-08B-GB
MENU
3. Enter the switch-off time
(Example: 23.30 hr)
return
TV
picture
?
Help
blue
Switch-on time:
20:00
1
2
3
4
5
6
7
8
9
yellow
Switch-off time:
23:30
--/-
0
white
Reminder time
-- : --
green
Time of day:
08 : 22
When the set has switched itself on automatically,
you must press any key you choose on the remote
control, otherwise the set will return to standby
mode after about 10 min. This is a safety precaution
to ensure that the television does not stay on if
you are not at home.
If you press the yellow key, the text in the second line
is displayed on a yellow background.
Now press the
+
Time settings
+
yellow
Ȅ
AV
or the
-
-
+
TV
A
2
If you press the blue key, the text in the first line is displayed on a blue background.
Now press the or the key to switch on the function.
Enter the desired switch-on time with the numeric
keys. The function is activated after input of the last
digit. Henceforth the TV set will switch itself on every
day at the preprogrammed time.
+
Time settings
+
blue
return
-
MENU
2. Enter the switch-on time
(Example: 20.00 hr)
key to switch on the function.
Enter the desired switch-off time with the numeric
keys. The function is activated after input of the last
digit.
P+
-
P-
-
+
?
A
B
REC
Ȅ
AV
698-08C-GB
2
24
3
3
0
The switch-on/switch-off times can be deleted with
the
keys (function OFF).
+
MENU
-
OK
TV
8. Time settings
Press this key on the remote
control....
The screen displays
MENU
return
TV
4. Enter the reminder time
(Example: 21.45 hr)
Explanation
picture
?
Help
Time settings
If you press the white key, the text in the third line is
displayed on a white background.
blue
Switch-on time:
20:00
nter the desired reminder time with the numeric keys.
The function is activated after input of the last digit.
9
yellow
Switch-off time:
23:30
The reminder time can be deleted with the
+
white
Switch-on/off and
reminder time
white
Reminder time
21:45
green
Time of day:
08 : 22
1
2
3
4
5
6
7
8
--/-
0
-/--
key.
P+
OK
-
PTV
2
1
4
5
MENU
?
A
B
REC
Ȅ
AV
698-08D-GB
At the programmed time, a box with the text „Hallo“ is
displayed on the screen if the TV set is switched on.
OK
This box disappears if you press the OK or
switch to a different programme position.
TV
key or
or
TV
Hallo
MENU
5. Enter the time manually
(Example: 14.24 hr)
TV
picture
?
Time settings
blue
Switch-on time:
Off
9
yellow
Switch-off time:
Off
+
green
return
white
Reminder time
--:--
green
Time of day:
--:--
1
2
3
4
5
6
7
8
--/-
0
Help
If you switch to a programme position in which teletext
has been stored, the current time automatically
appears in this menu and the green key is not displayed.
In such a case the time setting cannot be changed.
If, for the reason stated above, the clock is to be set
manually, simply enter the time with four digits.
P+
OK
-
PTV
MENU
1
4
2
4
?
A
B
REC
Ȅ
AV
698-08E-GB
From the standby mode, the TV set will switch itself on
at 20.00 hr, remind you of the telephone call you wish
to make at 21.45 hr, and switch back to standby mode
at 23.30 hours.
6. Switch to standby mode
TV picture
25
8.1 Childlock
Switching on
Your TV set can be protected against unauthorized use. It is possible to prevent any use of the television at all or to permit viewing of up to
five specific programmes. Consequently, the childlock can be set to prevent a child from seeing violent films, yet still provide access to
children’s programmess on selected channels. Access to such permitted programmes can be provided in general or within a specified
period of time.
Example: The children shall only be allowed to watch programmes on the programme positions 01, 02 and 05 from 14.00 to 18.00 hr.
Access to all other programme positions shall be excluded.
Press this key on the remote
control....
The screen displays
MENU
1. Call the „Timer/childlock“
menu
return
TV
Explanation
picture
?
Help
Timer/childlock
1
2
3
4
5
6
7
8
9
--/-
0
MENU
blue
Time settings
yellow
Childlock
white
Timer recording
P+
OK
+
-
green
PTV
MENU
Basic setting of MVS
?
A
B
REC
Ȅ
AV
698-08F-GB
picture
?
Help
Childlock
blue
Childlock. . . . .
9
yellow
Permitted programmes:
-- -- -- -- --
white
Enter code . . . . : - - - -
1
2
3
4
5
6
7
8
--/-
0
Off
P+
OK
-
P-
blue
TV
MENU
?
green
Begin viewing . : - - : -
red
End viewing . . . : - - : -
A
B
REC
-
+
3. Select and store permitted
programmes
Ȅ
AV
698-08G-GB
MENU
return
-
TV
picture
?
Help
Childlock
yellow
1
2
3
1
2
3
4
5
6
7
8
9
--/-
0
Off
blue
Childlock. . . . .
yellow
Permitted programmes:
01 02 05 -- --
P+
6
-
5
OK
+
4
white
P-
MENU
?
7
8
0
OK
26
9
Enter code . . . . : - - - -
TV
green
Begin viewing . : - - : -
red
End viewing . . . : - - : -
A
B
REC
Ȅ
AV
698-08H-GB
store?
OK
-
The childlock can be switched on and off with the
keys. If you set the childlock to „ON“, you must also enter a 4-digit personal code number.
If the childlock has been set previously, this setting
will be used and the television switches to standby
mode.
The TV set can now still be switched on, but programmes
will not be shown on the screen. Instead the „Childlock“
menu will be displayed with the cursor on the „Enter
code“ line.
The childlock can be turned off again by entering the
4-digit personal code number. The TV is automatically
switched to standby mode after approx. 10 minutes if it
has not been switched off manually in the meantime.
-
TV
+
yellow
return
+
MENU
2. Call the „Childlock“
submenu and switch on
the childlock
A maximum of 5 programme positions can be entered
to which access is permitted.
These programme positions are entered with the
numeric keys; all entries can be erased with the -/-key.
Back to the example:
Enter two digits for each programme position that may
be watched. In our example the child has access to the
programme positions 01, 02 and 05.
Before continuing with the next programming steps,
the permitted programme positions entered above
must be stored; otherwise the entries will be lost.
8.1 Childlock
Press this key on the remote
control....
The screen displays
MENU
return
TV
Explanation
picture
?
Help
4. Enter your personal code
9
yellow
Permitted programmes:
white
Enter code :
2
3
4
5
6
7
8
--/-
0
3
Ask your local dealer for help if you have forgotten
your personal code number.
01 02 05 -- -P+
-
2
Childlock. . . . .
+
1
Off
blue
1
Enter your personal 4-digit code at this point.
The digits are entered with the numeric keys. The
entered code number is NOT displayed!
Childlock
white
Switching on
OK
P-
- - ----:-
TV
MENU
4
5
6
?
B
REC
7
8
green
Begin viewing . : --:- -
red
End viewing . . . : --:- -
A
9
Ȅ
AV
698-08I-GB
0
MENU
5. Enter the beginning and
end of the viewing period
1
green
4
0
return
TV
picture
?
Help
Childlock
0
1
2
3
4
5
6
7
8
9
--/-
0
The TV is not automatically switched on at the beginning of this period; it is, however, automatically switched off at the end of it.
Off
blue
Childlock. . . . .
yellow
Permitted programmes:
01 02 05 -- --
P+
+
OK
white
-
P-
Enter code :
Here you can enter the times between which viewing
of the permitted programmes is allowed.
----
If no permitted programmes have been entered all TV
transmissions within this period can be viewed.
TV
MENU
1
red
8
0
0
?
green
Begin viewing . : 14:0 0
red
End viewing . . . : 18:0 0
A
B
REC
Ȅ
AV
698-08J-GB
The childlock is activated when the set is switched off
with the
key or with the ON/OFF key.
6. Activate the childlock
8.1 Childlock
MENU
Call the TV menu and enter
your personal code
1
2
3
return
TV
picture
?
Help
Childlock
1
2
3
4
5
6
7
8
9
--/-
0
Switching off
Entry of the personal code number switches off the
childlock and the selected programme is displayed on
the screen.
Off
blue
Childlock. . . . .
yellow
Permitted programmes:
01 02 05 -- --
Ask your local dealer for help if you have forgotten
your personal code number.
P+
6
-
5
OK
+
4
white
P-
Enter code :
- - ----:-
TV
MENU
?
7
8
0
9
green
Begin viewing . : --:- -
red
End viewing . . . : --:- -
A
B
REC
Ȅ
AV
698-08I-GB
27
8.2 Recording with the timer
The menu „Timer recording“ is intended primarily for recording Pay-TV programmes (e.g. Premiere) in cases where the decoder is
connected to a EURO socket of the TV set.
8 timers can be programmed up to 2 months in advance.
Example: A VHS video recorder which has only one EURO socket is connected to the EURO 1 socket of the TV, while a Pay-TV decoder is
connected to the EURO 3 socket. You now wish to record a film running on the Pay TV channel.
Press this key on the remote
control....
The screen displays
MENU
1. Call the „Timer recording“
menu
return
TV
Explanation
picture
Help
?
Timer recording
Prog.
--
MENU
green
white
—
—
—
—
—
—
—
—
—
—
VPS
Time of day
Date
.
.
.
.
.
.
.
.
.
.
:
:
:
:
:
:
:
:
:
:
enter date
19.03.
—
—
—
—
—
—
—
—
—
—
:
:
:
:
:
:
:
:
:
:
If no timers have been programmed before, the table
in the menu is empty. If you have previously programmed timer recordings, these will be displayed in the
table.
—
—
—
—
—
—
—
—
—
—
The current time of day and the current date are needed for programming in the timer menu. The time is
normally obtained from the Megatext function and the
date from the VPS signal. Note that some stations do
not transmit VPS signals and/or Megatext.
Help
The month, the day, the hours and the minutes must
each be entered in the form of two digits, e.g. 01.09
for September 1 and 09:00 for 9 AM.
14:20
If the time and/or date are not detected automatically, you must enter them manually.
698-08K-GB
2. Enter the date and time of
the film to be recorded
(see example)
MENU
return
TV
2
3
4
5
6
7
8
9
0
3. Store the programmed data
and return to the TV picture
or standby mode
OK
TV
or
Date
VPS
Time of day
09.03
.
.
.
.
.
.
.
.
.
20:15
:
:
:
:
:
:
:
:
:
— 22:10
—
:
—
:
—
:
—
:
—
:
—
:
—
:
—
:
—
:
enter date
19.03.
14:20
25 PREMI
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
MENU
return
TV
picture
If you make a mistake when entering the date and
time, you can delete the entry in the current column or
the entire line by pressing the -/-- key. The entire line
can be deleted only if the key symbols at the top of the
menu are displayed in colour.
Timer recordings are not possible if the childlock
is switched on.
698-08L-GB
?
Help
At the moment, PAY TV stations do not transmit a VPS
signal.
Timer recording
Time of day
Prog.
Date
25 PREMI
-- —
—
—
—
—
—
—
—
—
09.03
.
.
.
.
.
.
.
.
.
20:15
:
:
:
:
:
:
:
:
:
enter date
19.03.
698-08M-GB
28
?
Timer recording
Prog.
1
picture
— 22:10
—
:
—
:
—
:
—
:
—
:
—
:
—
:
—
:
—
:
14:20
VPS
—
—
—
—
—
—
—
—
—
—
The recording can be aborted at any time by pressing the keys AV , OK and TV sequentially, in
this order, or by pressing the -/-- key with the
timer menu displayed.
The same data must must also be entered on the
AV programme position of the video recorder or
on a programme position where the video recorder
does not receive a station.
9. Connecting headphones
Headphones can be connected to the TV by way of the connecting socket underneath the fascia cover at the front. The socket will only
accept headphones with a 3,5 mm jack plug ( Elba 6,35 mm ).
We recommend the use of headphones with an impedance of at least 32 Ohms. Headphones of a lower impedance (down to approx.
8 Ohms) will impair the sound quality.
The headphones volume can be stored as a standard value. The headphones and the TV speakers can be used together.
In the event of 2-channel sound transmissions it is possible to listen to either channel 1 or 2 on the headphones, irrespective of the
channel set for the TV speakers.
9. Headphones
Press this key on the remote
control....
The screen displays
Volume
Explanation
It is advisable to switch off the TV speakers with the
key when adjusting the volume for the headphones.
1. Switch off the TV speakers
and adjust the headphones
volume
Press the yellow key to display the bar for the headphones volume.
+
-
Adjust the volume with the
keys.
Vo l u m e h e a d p h o n e s
OK
+
-
65 change
695-DXX-GB
-
+
MENU
2. Store the headphones volume as a standard value
return
picture
TV
Help
Audio standard values
blue
MENU
?
1
2
3
4
5
6
7
8
9
--/-
0
All standard values can be stored in the „Audio standard values“ submenu.
Volume
48
The volume has already been adjusted (see step 1).
Treble
yellow
-
+ 23
It is now only necessary to press the
the headphones volume.
P+
Bass
white
+
OK
-
P-
-
+ 42
TV
MENU
-
A
B
REC
Ȅ
OK
key to store
Balance
green
?
OK
The standard value for the headphones volume can
only be stored by way of the TV menu.
+ 00
AV
red
Volume headphones
65
698-09A-GB
store ?
OK
3. Return to TV picture
TV picture
Sound mode selection for
headphones
Sound-mode headphones
change
-
Stereo / Chann.1 / Chann.2
OK
+
2x
698-B15-GB
+
With 2-channel sound transmissions it is possible to
select either channel 1 or channel 2.
If headphones are connected, it is possible to listen,
for example, to the English sound track on the speakers (channel 1) and to the other language on the
headphones (channel 2).
This setting can also be called by pressing repeatedly
the yellow key.
The desired channel can then be selected with the
keys..
29
-
TV
10. Megatext
Press this key on the remote
control....
The screen displays
MENU
1. Call Megatext
TV-picture
Explanation
View page
OK
?
Help
TOP
MEGATEXT
TV
2. Select a subject
Börse
Wetter
ARD-Programm
Football
Bundesligen
Hinweise
Fußball
VT-Redaktion
Sport
VT-Zentrale
Aktuelles
Index
Übersicht
Inhalt
Subj.
Chapter
on subject
MENU
TV-picture
For some stations, for example, only numbers, rather
than the header lines, appear in the Megatext file.
?
Help
TOP
MEGATEXT
Börse
Wetter
ARD-Programm
blue
Football
Bundesligen
Fußball
Sport
Aktuelles
3. Select a chapter
MENU
The displayed choice of chapters is adapted to the
currently selected subject.
Inhalt
Subj.
Chapter
on subject
TV-picture
View page
OK
Each time the blue key is pressed, the next subject is
selected and the corresponding file card is raised. Prolonged depression of the blue key raises all of the subjects sequentially.
Press the right side of the key to step backwards
through the subjects, or the left side of the key to step
forwards.
übermorgen
jetzt im TV
morgen
heute
Übersicht
The Megatext file displays all the subjects available on
a specific programme position and the chapters belonging
to the currently selected subject.
The range of subjects and chapters depend on the
transmitting station and can therefore be completely
different in each programme position.
View page
OK
Basic functions
?
Help
Each time the yellow key is pressed, the next chapter
is selected and the corresponding file card is raised.
TOP
MEGATEXT
Press the right side of the key to step backwards, or
the left side of the key to step forwards.
Börse
Wetter
ARD-Programm
yellow
Football
Bundesligen
Fußball
Sport
Aktuelles
Prolonged depression of the yellow key raises all the
chapters sequentially.
übermorgen
jetzt im TV
morgen
heute
Übersicht
Inhalt
Subj.
Chapter
on subject
695-MT 1-3-GB
4. Open the first page
of the chapter
MENU
Card index
Mark:
AV
next
Ȅ
new
?
300 ARD/ZDF Mi. 29.09.93 13:49:00
ARD
OK
HEUTE
vormittag
301
nachmittag 302
abend 303/304
MORGEN
vormittag
321
nachmittag 322
abend 323/324
ÜBERMORGEN
vormittag
341
nachmittag 342
abend 343/344
JETZT IM
PROGRAMM . . .
333
WOCHENÜBERSICHT . . .
360
EINS PLUS . . .
370
PROGRAMMBEGLEITUNG . .
390
UT-VORSCHAU .
398
ARD-Programm heute
30
Help
The first page of the selected subject and chapter is
displayed.
File symbols with arrows in the bottom line indicate
that the corresponding coloured keys will activate subject-by-subject, chapter-by-chapter or page-by-page
leafing.
The blue text window shows the name of the currently
selected subject, while the yellow shows the name of
the currently selected chapter.
10. Megatext
Press this key on the remote
control....
5. Page-by-page leafing
The screen displays
Card index
MENU
Mark:
AV
Ȅ
next
Explanation
new
?
Help
301 ARD/ZDF Mi. 5.10.93 10:52:00
ARD
white
05.55
06.00
09.00
09.03
09.45
10.00
10.03
10.45
11.00
11.03
12.35
12.55
13.00
13.05
Basic functions
Dienstag,
5. Oktober 1993
This function enables you to run through the individual
pages. Just as in a book, you can leaf forwards or
backwards from the displayed page.
Press the right side of the key to step backwards, and
the left side of the key to step forwards.
Käpt'n Blaubär
ARD-Morgenmagazin
Tagesschau
Dallas
Tele-Gym
Tagesschau
auslandsjournal
ZDF-Info Gesundheit
Tagesschau
Cappuccino Melange
Fernsehfilm, 1993 . . . . . . .
Umschau
Presseschau
Tagesschau
ARD-Mittagsmagazin . . . .
bis 13.45 Uhr
307
313
Nachmittagsprogramm auf 302
ARD-Programm heute
Card index
MENU
6. Chapter-by-chapter leafing
Mark:
AV
Ȅ
next
new
?
Help
321 ARD/ZDF Di. 12.10.93 10:54:00
ARD
05.55
06.00
09.00
09.03
09.45
10.00
10.03
10.35
11.00
11.03
yellow
12.30
12.55
Mittwoch,
13. Oktober 1993
JOYrobic
ZDF-Morgenmagazin
heute
Dallas
Tele-Gym
heute
Gott und die Welt . . . . . . . 326
ZDF-Info
Arbeit und Beruf
heute
Männer im gefährlichen
Alter
Spielfilm, D 1953 . . . . . . . . 327
Umschau
Presseschau
bis 13.00 Uhr
This function enables you to run through the individual
chapters.
Each time you press the yellow key, the first page of
the next or previous chapter is opened.
Press the right side of the key to step backwards, and
the left side of the key to step forwards.
Nachmittagsprogramm auf 322
ARD-Programm morgen
7. Subject-by-subject leafing
MENU
Card index
Mark:
AV
Ȅ
next
new
?
Help
400 ARD/ZDF Di. 12.10.93 10:52:00
Each time you press the blue key, the first page of the
next or previous subject is opened. In most cases, this
will be an index page.
W E T T E R
Ü B E R S I C H T
Press the right side of the key to step backwards, and
press the left side of the key to step forwards.
Deutschland
Wettervorhersage . . . . . . . . . . . . 401
. . . . . 402
Früh- bzw. Mittagstemperaturen
Aussichten für die nächsten Tage . . . . . 403
blue
Europäisches Reisewetter
Nord- und Nordwesteuropa
Mittel- und Südosteuropa .
Süd- und Südwesteuropa .
Wassertemperaturen . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
404
405
406
407
Temperaturen international . . . . . . . . 408
Quelle: METEO CONSULT / DWD
Wetter
Inhalt
31
10. Megatext
Press this key on the remote
control....
1. Recognizing multiple pages
The screen displays
MENU
Card index
Mark:
AV
Ȅ
next
Explanation
new
?
Help
422 ARD/ZDF Di. 12.10.93 13:08:00
/1
/2
/3
/4
/5
/6
/7
/8
/9
/10
/11
/12
/13
/14
/15
>>
börse frankfurt
Fortlaufende Notierungen
Kassa
12.10.93
1/4
Vortag
AEG
AMB
AGIV
Allianz
Altana
Asko
BSAF
Bayer
Bay. Hypo
BHF-Bank
BMW
Bay. Verbank
165,0
1270,0
528,0
2730,0
578,0
875,0
267,0
316,5
472,0
496,5
596,0
524,0
164,8
1270,0
532,0
2709,0
578,0
891,0
263,0
312,0
470,0
493,0
589,0
518,0
164,8
1270,0
529,0
2710,0
578,0
894,0
263,8
312,7
470,5
491,0
591,0
518,0
ohne Gewähr
Börse
MENU
2. Selecting subpages
Card index
Kurse Ffm.
Mark:
AV
Ȅ
next
new
?
Help
422 ARD/ZDF Di. 12.10.93 13:08:00
P-
P+
Multiple pages
/1
/2
/3
/4
/5
/6
/7
/8
/9
/10
/11
/12
/13
/14
/15
>>
börse frankfurt
Fortlaufende Notierungen
12.10.93
Kassa
Vortag
324,7
227,5
740,5
384,0
206,0
808,0
576,0
431,5
125,0
580,0
1122,0
286,5
930,0
326,5
232,0
741,0
383,0
206,5
809,0
580,0
435,0
125,0
588,0
1140,0
291,5
962,0
Commerzbank 325,0
Continental
225,6
Daimler
741,5
Degussa
384,5
Dt. Babcock
206,5
Dt. Bank
808,4
Douglas
579,0
Dresdn. Bk.
430,5
FAG
123,5
Henkel Vz.
580,0
Hochtief
1125,0
Hoechst
285,5
Holzmann
935,0
Multiple pages are indicated by a dark bar with the
subpage numbers on the left-hand side of the displayed page.
The bright numbers indicate the number of subpages
contained in this multiple page. The number of subpages is transmitted by the stations at intervals of 20
seconds. Consequently, it may take some time until all
subpage numbers are displayed.
If there are more than 15 subpages, the cursor (white
bar) can be moved downwards with the P- key to display the next group of subpage numbers (for example
/16 to /30).
Some stations do not provide multiple page identification; in this case, the subpages are displayed sequentially. To stop a page for reading, one of the A or B function keys must be programmed with the „Stop page“
function in Megatext mode. Renewed depression of
the „Stop page“ function key advances to another
subpage (the one the station is currently transmitting).
P
Use the Pkeys to move the cursor (white bar)
up or down. The subpage selected with the cursor is
displayed on the screen.
+
2/4
The numbers in the top right corner of the displayed
page (in this example 2/4) indicate the currently displayed subpage and the total number of subpages (in
the example: subpage 2 of a total of 4 pages).
ohne Gewähr
Börse
Kurse Ffm.
10. Megatext
MENU
Card index
Mark:
AV
next
Ȅ
new
?
300 ARD/ZDF Mi. 29.09.93 13:49:00
ARD
-/--
HEUTE
vormittag
301
nachmittag 302
abend 303/304
MORGEN
vormittag
321
nachmittag 322
abend 323/324
OK
ÜBERMORGEN
vormittag
341
nachmittag 342
abend 343/344
ARD-Programm
694-00G-D
32
JETZT IM
PROGRAMM . . .
333
WOCHENÜBERSICHT . . .
360
EINS PLUS . . .
370
PROGRAMMBEGLEITUNG . .
390
UT-VORSCHAU .
398
heute
Help
Page selection by cursor
Use the -/-- key to move the cursor (coloured bar)
downwards through the page numbers. The page
number highlighted by the cursor can be directly called
with the OK key.
10. Megatext
Press this key on the remote
control....
The screen displays
MENU
1. Select the subject
TV-picture
Explanation
View page
OK
Help
?
TOP
MEGATEXT
Select a file card for any desired subject.
Continue pressing the blue key to run through the filecard box.
Börse
Wetter
ARD-Programm
Football
Bundesligen
Fußball
Sport
Aktuelles
blue
Direct page selection
The displayed choice of chapters is adapted to the
selected subject.
übermorgen
jetzt im TV
morgen
heute
Inhalt
Übersicht
Subj.
Chapter
on subject
695-MT2-GB
MENU
2. Select the chapter
TV-picture
OK
View page
Help
?
TOP
MEGATEXT
Börse
Wetter
Continue pressing the yellow key to run through the
file-card box.
ARD-Programm
Football
Bundesligen
Fußball
Sport
Aktuelles
yellow
Select a file card for any desired chapter.
übermorgen
jetzt im TV
morgen
heute
Übersicht
Inhalt
Subj.
Chapter
on subject
695-MT3-GB
3. Open the first page
of the chapter
MENU
Card index
Mark:
AV
new
?
Help
The first page of the selected subject and chapter is
displayed.
301 ARD/ZDF Mi. 5.10.93 10:52:00
ARD
05.55
06.00
09.00
09.03
09.45
10.00
10.03
10.45
11.00
11.03
OK
Ȅ
next
12.35
12.55
13.00
13.05
Dienstag,
5. Oktober 1993
Käpt'n Blaubär
ARD-Morgenmagazin
Tagesschau
Dallas
Tele-Gym
Tagesschau
auslandsjournal
ZDF-Info Gesundheit
Tagesschau
Cappuccino Melange
Fernsehfilm, 1993 . . . . . . .
Umschau
Presseschau
Tagesschau
ARD-Mittagsmagazin . . . .
bis 13.45 Uhr
307
313
Nachmittagsprogramm auf 302
ARD-Programm heute
4. Enter the page number
e.g. page 422
4
2
2
MENU
Card index
Mark:
AV
Ȅ
next
new
?
Help
422 ARD/ZDF Di. 12.10.93 13:08:00
/1
/2
/3
/4
/5
/6
/7
/8
/9
/10
/11
/12
/13
/14
/15
>>
börse frankfurt
Fortlaufende Notierungen
Kassa
12.10.93
1/4
Vortag
AEG
AMB
AGIV
Allianz
Altana
Asko
BSAF
Bayer
Bay. Hypo
BHF-Bank
BMW
Bay. Verbank
165,0
1270,0
528,0
2730,0
578,0
875,0
267,0
316,5
472,0
496,5
596,0
524,0
164,8
1270,0
532,0
2709,0
578,0
891,0
263,0
312,0
470,0
493,0
589,0
518,0
164,8
1270,0
529,0
2710,0
578,0
894,0
263,8
312,7
470,5
491,0
591,0
518,0
After depression of the first numeric key, the number of this key, followed by two hyphens, appears at
the top left of the screen. Enter the complete 3-digit
number. A green line with the text „Wait for page ...“
is displayed at the top of the screen after the last
digit has been entered. A red line with the message
„Page is not transmitted“ is displayed if the entered
page number does not exist. Otherwise the TV searches
for the specified page and displays it as soon as it is
located.
ohne Gewähr
Börse
Kurse Ffm.
33
10. Megatext
Press this key on the remote
control....
The screen displays
Direct page selection
Explanation
5. Return to TV picture
TV
10. Megatext
MENU
Return to last index page
Card index
Mark:
AV
next
Ȅ
new
?
300 ARD/ZDF Mi. 29.09.93 13:49:00
ARD
HEUTE
vormittag
301
nachmittag 302
abend 303/304
0
MORGEN
vormittag
321
nachmittag 322
abend 323/324
ÜBERMORGEN
vormittag
341
nachmittag 342
abend 343/344
JETZT IM
PROGRAMM . . .
333
WOCHENÜBERSICHT . . .
360
EINS PLUS . . .
370
PROGRAMMBEGLEITUNG . .
390
UT-VORSCHAU .
398
ARD-Programm heute
34
Help
Return to last index page
Press the 0 key to return to the previous numerically
called page or, if not numerically called, to the index
page of the displayed choice.
The adjoining picture shows the index page of the ARD
channel as an example.
10. Megatext
Press this key on the remote
control....
1. Select double font size,
e.g. press the B* key
A
B *
2. Scroll the page upwards,
e.g. press the B* key
A
B *
3. Scroll the page further,
e.g. press the B* key
A
B *
4. Return to normal font size
The screen displays
Explanation
300 ARD/ZDF Mi. 29.09.93 13:49:00
When the B* key is pressed for the first time, the upper
part of the selected page is displayed with the font size
doubled.
ARD
B *
You can scroll slowly through the page by holding
down the key.
HEUTE
vormittag 301 JETZT IM
nachmittag 302 PROGRAMM . . . 333
abend 303/304
WOCHENMORGEN
ÜBERSICHT 360
HEUTE
vormittag 301 JETZT IM
nachmittag 302 PROGRAMM . . .
abend 303/304
WOCHENMORGEN
ÜBERSICHT . . .
vormittag 321
nachmittag 322 EINS PLUS . . .
abend 323/324
PROGRAMMÜBERMORGEN BEGLEITUNG . .
vormittag 341
HEUTE
vormittag 301 JETZT IM
nachmittag 302 PROGRAMM . . .
abend 303/304
WOCHENMORGEN
ÜBERSICHT . . .
vormittag 321
nachmittag 322 EINS PLUS . . .
abend 323/324
PROGRAMMÜBERMORGEN BEGLEITUNG . .
vormittag 341
333
360
370
390
When the B* key is pressed for the third time, the displayed page is scrolled further, and so on.
333
360
370
390
ARD
MORGEN
vormittag
321
nachmittag 322
abend 323/324
ÜBERMORGEN
vormittag
341
nachmittag 342
abend 343/344
JETZT IM
PROGRAMM . . .
333
WOCHENÜBERSICHT . . .
360
EINS PLUS . . .
370
PROGRAMMBEGLEITUNG . .
390
UT-VORSCHAU .
398
ARD-Programm heute
* The B key was programmed in the factory for this
function, but this programming can be changed (see
Section „Equipment configuration - Assigning the
function keys“).
When the B* key is pressed for the second time, the
displayed page is scrolled upwards.
300 ARD/ZDF Mi. 29.09.93 13:49:00
HEUTE
vormittag
301
nachmittag 302
abend 303/304
A
Doubling the font size
Press the B* key for a fifth time to return to normal font
size.
* Depending on the assignment of the
function keys. The factory setting is B.
35
10. Megatext
Infotext - Setting marks
There will be certain Megatext pages, e.g. stock market, news, weather forecast, etc., that you will want to read repeatedly. We have programmed a way of making it easier to read such pages.
10 marks per position can be set on each of the first ten programme positions. These marks can be set on any desired text page of your
choice, and they can be erased at any time. After marks have been assigned to a programme position it will be possible to step sequentially
through the marked pages with the ķ INFO key. Marks can also be set on all programme positions above Pr 10, but these marks are
erased when you switch to another programme position.
Press this key on the remote
control....
1. Call the desired page
e.g. page 400
The screen displays
Card index
MENU
Mark:
AV
Ȅ
next
Explanation
new
?
Help
400 ARD/ZDF Di. 12.10.93 10:52:00
W E T T E R
Ü B E R S I C H T
4
0
0
Deutschland
Wettervorhersage . . . . . . . . . . . . 401
. . . . . 402
Früh- bzw. Mittagstemperaturen
Aussichten für die nächsten Tage . . . . . 403
Europäisches Reisewetter
Nord- und Nordwesteuropa
Mittel- und Südosteuropa .
Süd- und Südwesteuropa .
Wassertemperaturen . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
404
405
406
407
Temperaturen international . . . . . . . . 408
Quelle: METEO CONSULT / DWD
Wetter
Card index
MENU
2. Set the first mark
Inhalt
Mark:
AV
Ȅ
next
new
?
Help
MARKE 1 400 ARD/ZDF Di. 12.10.93 10:52:00
W E T T E R
Ü B E R S I C H T
red
If marks have not yet been set in this programme
position, then press the red key to set the 1st mark.
„MARK 1“ is displayed in green lettering in the top lefthand corner of the screen.
Deutschland
Wettervorhersage . . . . . . . . . . . . 401
. . . . . 402
Früh- bzw. Mittagstemperaturen
Aussichten für die nächsten Tage . . . . . 403
Europäisches Reisewetter
Nord- und Nordwesteuropa
Mittel- und Südosteuropa .
Süd- und Südwesteuropa .
Wassertemperaturen . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
404
405
406
407
Temperaturen international . . . . . . . . 408
Quelle: METEO CONSULT / DWD
Wetter
3. Select the next page
e.g. 422
white
MENU
Card index
Inhalt
Mark:
AV
Ȅ
next
/1
/2
/3
/4
/5
/6
/7
/8
/9
/10
/11
/12
/13
/14
/15
>>
?
Help
börse frankfurt
Fortlaufende Notierungen
12.10.93
Kassa
Vortag
324,7
227,5
740,5
384,0
206,0
808,0
576,0
431,5
125,0
580,0
1122,0
286,5
930,0
326,5
232,0
741,0
383,0
206,5
809,0
580,0
435,0
125,0
588,0
1140,0
291,5
962,0
Commerzbank 325,0
Continental
225,6
Daimler
741,5
Degussa
384,5
Dt. Babcock
206,5
Dt. Bank
808,4
Douglas
579,0
Dresdn. Bk.
430,5
FAG
123,5
Henkel Vz.
580,0
Hochtief
1125,0
Hoechst
285,5
Holzmann
935,0
ohne Gewähr
Börse
36
new
422 ARD/ZDF Di. 12.10.93 13:08:00
Kurse Ffm.
2/4
In the ARD channel, for example, page 422 is a multiple
page.
With multiple pages, marks can be set on any subpage.
10. Megatext
Press this key on the remote
control....
The screen displays
MENU
4. Set the second mark
Card index
Mark:
AV
Ȅ
next
Explanation
new
?
Help
MARKE 2 422 ARD/ZDF Di. 12.10.93 13:08:00
/1
/2
/3
/4
/5
/6
/7
/8
/9
/10
/11
/12
/13
/14
/15
>>
red
börse frankfurt
Fortlaufende Notierungen
12.10.93
Kassa
Vortag
324,7
227,5
740,5
384,0
206,0
808,0
576,0
431,5
125,0
580,0
1122,0
286,5
930,0
326,5
232,0
741,0
383,0
206,5
809,0
580,0
435,0
125,0
588,0
1140,0
291,5
962,0
Commerzbank 325,0
Continental
225,6
Daimler
741,5
Degussa
384,5
Dt. Babcock
206,5
Dt. Bank
808,4
Douglas
579,0
Dresdn. Bk.
430,5
FAG
123,5
Henkel Vz.
580,0
Hochtief
1125,0
Hoechst
285,5
Holzmann
935,0
Infotext - Setting marks
2/4
When the required page is displayed (in our example
subpage 422/2), press the red key again.
„MARK 2“ is now displayed in green lettering in the
top left-hand corner of the screen.
ohne Gewähr
Börse
5. Set further marks
e.g. page 110
MENU
Card index
MARKE 3
Kurse Ffm.
Mark:
AV
next
Ȅ
new
?
Help
110 ARD/ZDF Do. 14.10.93 08:11:00
10 marks can be set as described in steps 1 - 4 in
each of the first 10 programme positions.
AKTUELLES
Letzte Meldung . . . . . . . . . .
1
1
red
0
111
Nachrichten . . . . . . . . . . 112-115
Politik, Wirtschaft, Kultur
Umwelt, Ratgeber, Aus aller Welt
Wetter . . . . . . . . . . . . . . .
400
Börsenkurse
420
. . . . . . . . . . .
Kirche . . . . . . . . . . . . . 155/156
Am Wochenende (Freitag - Sonntag):
Reise . . . . . . . . . . . . . . . 560
Gesundheit . . . . . . . . . . . . 580
***
Sport . . . . . . . . . . 200
Aktuelles
Inhalt
***
6. Return to TV picture
TV
37
10. Megatext
Press this key on the remote
control....
1. From TV picture to
the first mark
The screen displays
Card index
MENU
Mark:
AV
Ȅ
next
Explanation
new
?
Help
MARKE 1 400 ARD/ZDF Di. 12.10.93 10:52:00
W E T T E R
Ü B E R S I C H T
ķ INFO
Infotext - Mark-by-mark advance
After the ķ INFO key has been pressed, a panel with
„Mark 1“ will be displayed.
On programme positions without a mark, a white field
will be displayed with the text „No mark“.
Deutschland
Wettervorhersage . . . . . . . . . . . . 401
. . . . . 402
Früh- bzw. Mittagstemperaturen
Aussichten für die nächsten Tage . . . . . 403
Europäisches Reisewetter
Nord- und Nordwesteuropa
Mittel- und Südosteuropa .
Süd- und Südwesteuropa .
Wassertemperaturen . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
404
405
406
407
Temperaturen international . . . . . . . . 408
Quelle: METEO CONSULT / DWD
Wetter
2. Step forward to the
next mark
ķ INFO
or
green
MENU
Card index
ķ INFO
or
TV
38
Mark:
AV
Ȅ
next
new
?
Help
MARKE 2 422 ARD/ZDF Di. 12.10.93 13:08:00
/1
/2
/3
/4
/5
/6
/7
/8
/9
/10
/11
/12
/13
/14
/15
>>
börse frankfurt
Fortlaufende Notierungen
12.10.93
Kassa
Vortag
324,7
227,5
740,5
384,0
206,0
808,0
576,0
431,5
125,0
580,0
1122,0
286,5
930,0
326,5
232,0
741,0
383,0
206,5
809,0
580,0
435,0
125,0
588,0
1140,0
291,5
962,0
Commerzbank 325,0
Continental
225,6
Daimler
741,5
Degussa
384,5
Dt. Babcock
206,5
Dt. Bank
808,4
Douglas
579,0
Dresdn. Bk.
430,5
FAG
123,5
Henkel Vz.
580,0
Hochtief
1125,0
Hoechst
285,5
Holzmann
935,0
Each time the ķ INFO key is pressed, you advance to
the next mark. In this manner you can run through all
pages on which marks are set.
2/4
ohne Gewähr
Börse
3. Return to TV picture
Inhalt
Kurse Ffm.
The ķ INFO key will return you to the TV picture after
having run through all marks.
Press the TV key to return directly to the TV picture
without having to run through all the marks.
10. Megatext
Press this key on the remote
control....
1. Call the desired page
e.g. page 422/2
ķ INFO
or
green
The screen displays
MENU
Card index
Mark:
AV
Ȅ
next
Explanation
new
?
Help
MARKE 2 422 ARD/ZDF Di. 12.10.93 13:08:00
/1
/2
/3
/4
/5
/6
/7
/8
/9
/10
/11
/12
/13
/14
/15
>>
börse frankfurt
Fortlaufende Notierungen
12.10.93
Kassa
Vortag
324,7
227,5
740,5
384,0
206,0
808,0
576,0
431,5
125,0
580,0
1122,0
286,5
930,0
326,5
232,0
741,0
383,0
206,5
809,0
580,0
435,0
125,0
588,0
1140,0
291,5
962,0
Commerzbank 325,0
Continental
225,6
Daimler
741,5
Degussa
384,5
Dt. Babcock
206,5
Dt. Bank
808,4
Douglas
579,0
Dresdn. Bk.
430,5
FAG
123,5
Henkel Vz.
580,0
Hochtief
1125,0
Hoechst
285,5
Holzmann
935,0
Infotext - Erasing marks
Press the ķ INFO key to call the page where the mark
is to be erased.
2/4
ohne Gewähr
Börse
MENU
2. Erase the mark
red
Card index
Kurse Ffm.
Mark:
AV
Ȅ
next
new
?
Help
422 ARD/ZDF Di. 12.10.93 13:08:00
/1
/2
/3
/4
/5
/6
/7
/8
/9
/10
/11
/12
/13
/14
/15
>>
börse frankfurt
Fortlaufende Notierungen
12.10.93
Kassa
Vortag
324,7
227,5
740,5
384,0
206,0
808,0
576,0
431,5
125,0
580,0
1122,0
286,5
930,0
326,5
232,0
741,0
383,0
206,5
809,0
580,0
435,0
125,0
588,0
1140,0
291,5
962,0
Commerzbank 325,0
Continental
225,6
Daimler
741,5
Degussa
384,5
Dt. Babcock
206,5
Dt. Bank
808,4
Douglas
579,0
Dresdn. Bk.
430,5
FAG
123,5
Henkel Vz.
580,0
Hochtief
1125,0
Hoechst
285,5
Holzmann
935,0
ohne Gewähr
Börse
Kurse Ffm.
2/4
Erasure of the mark on the current text page changes
the sequence of the remaining marks.
Example:
3 marks have been set in the current programme position:
- Mark 1 on text page 400
- Mark 2 on text page 422/2
- Mark 3 on text page 503
You now erase the mark 2 on text page 422/2.
The sequence of the remaining marks is immediately
re-arranged and is now::
- Mark 1 on text page 400
- Mark 2 on text page 503
3. Return to TV picture
TV
39
10. Megatext
Subtitles
This TV enables you to display programme subtitles automatically.
For this purpose one of the two A or B function keys must be programmed on the remote control handset. Please refer to Section „Equipment
configuration - Assigning the function keys“ for programming. The subtitles will only be displayed automatically after a function key
has been programmed accordingly.
Example: You wish to watch the news with its subtitles. Program a function key with the „Subtitle“ function.
Press this key on the remote
control....
The screen displays
Explanation
The teletext transmitted by the station is superimposed on the picture at the bottom of the screen.
1. Display of subtitles in the
current programme
The subtitle function can be activated or deactivated
with the A or B function key.
automatically
In Ballungsgebieten sind solche Bilder selten
2. Blank out the subtitles*
A
or
B
The subtitle function can be switched off and on again
with the correspondingly programmed function key.
Note: If the subtitle function is programmed for
one of the function keys, it will automatically be activated when the TV set is
switched on.
* Depending on the assignment of the function keys
10. Megatext
Access to riddle solutions
Riddle solutions key
Megatext contains riddles with hidden answers.
The solutions to these riddles can be displayed with
the A* or B function key.
A *
or
B
* Depending on the assignment of the function
keys. The factory setting is A.
40
11. Special picture effects
(not for Gemini)
Variable Zoom
All programmes that are not transmitted in the traditional 4:3 screen format, such as cinema films in Cinemascope or Super-Cinemascope or
16:9 format, have black bars at the top and bottom of the screen.
With the zoom function, you can increase the size of the picture and make the black bars disappear. Although this also causes part of the
picture to move off the screen at each side, the resulting loss of information is slight and less disturbing than the black bars.
Press this key on the remote
control....
The screen displays
Press the P button until the black bars at the top
and bottom of the screen have disappeared. The
entire picture is enlarged uniformly.
1. Switch on the zoom function
and enlarge the picture
+
IJ
The selected enlargement factor is automatically
stored for this programme position as long as the
TV set is not switched off. Switching to another
station will restore the picture to its normal size.
If you return to the station for which you activated the zoom function, the picture will be automatically enlarged if the same programme is still
running.
P+
Zoom
IJ
If you wish to use the selected enlargement also
for other programmes, press the IJ key again
after setting the zoom factor with the P key.
This returns the picture to its normal size, but
stores the current enlargement factor for subsequent use.
2. Call the zoom function for the
current programme position
+
IJ
Zoom
IJ
IJ
3. Switch off the zoom function
2x
Explanation
IJ
IJ
Zoom
If the TV set has been switched off with the
remote control or the main switch, the stored
enlargement factor can be recalled by pressing
the IJ key twice.
IJ
41
11. Special picture effects
Press this key on the remote
control....
The screen displays
Frame freeze
Explanation
When you press this key, the current frame is
„frozen“ on the screen. The TV programme (or
the video film) continues to run in the background.
1. Activating frame freeze
Pressing the key again switches back to the current programme (or video film).
2. Deactivating frame freeze
11. Special picture effects
Picture format
The „picture format“ function is used primarily for displaying the picture format of external devices (such as a 16:9 video recorder) in the
correct proportions.
It can, however, also be used to make the picture of a 4:3 programme wider. This function can be stored on one of the function keys.
Press this key on the remote
control ...
The screen displays
1. Call the „picture format“
function
A*
R
B*
*) depending on the function key
assignments
L
Press the function key you have programmed for
this function.
The width of the picture is increased proportionally to fill the entire width of the screen.
R
42
T
Explanation
T
L
11. Special picture effects (only Gemini)
4:3 / 16:9
All programmes that are not transmitted in the traditional 4:3 format, such as cinema films in Cinemascope or Super-Cinemascope or 16:9
format, have black bars at the top and bottom of the screen.
With the 4:3 / 16:9 function, you can increase the size of the picture and make the black bars disappear.
Press this key on the remote
control....
The screen displays
Explanation
1. Call the 16:9 function
R
R
2x
T
T
L
L
IJ
16:9
11. Special picture effects (only Gemini)
Zoom
All programmes transmitted in 4:3 format are displayed on the screen with black stripes on the left and right. Cinemascope, 16:9 films
and other wide-screen formats are displayed with black stripes at the top and bottom.
The zoom function permits you to increase the picture size, thus moving the black stripes off the visible part of the screen.
Press this key on the remote
control....
The screen displays
IJ
R
T
-
Zoom
+
-
+
2. Move the zoomed picture up
and down
You can move the magnified picture upwards by
pressing the P key or downwards by pressing
the P- key.
L
+
IJ
These modified picture settings are automatically stored for this programme position as long as
the TV set is not switched off.
Zoom
-
P-
+
P+
You can magnify the picture uniformly in five
steps by pressing the . The size of the magnified picture can be reduced again by pressing
the key.
-
3x
L am Bildschirm erscheint
.R. .T und
+
1. Call the zoom function and
magnify the picture
Explanation
If you return to the station for which you activated the zoom function, the picture will be automatically enlarged if the same programme is still
running.
43
11. Supplement to Equipment Configuration
Grey value of side bars
(only Gemini)
Grey value of side bars: When "normal" 4:3 format programmes are being received, grey bars appear at the left and right sides of the
screen. The tonal value of these side bars can be adjusted in steps from 0 to 6, where 0 is black and 6 is light grey.
1. Ajustar el valor gris del
margen
The screen displays
MENU
return
TV
Explanation
picture
Help
?
blue
This setting applies to all programme positions.
Prog. change settings
1
2
3
4
5
6
7
8
9
yellow
yes
0
RGB priority:
--/-
+
3 x red
+
Equipm. configuration
MENU
The grey value of the side bars on the screen
(during reception of a programme in 4:3 format)
can be adjusted with the
keys.
-
Press this key on the remote
control....
white
Sound settings:
yes
red
Side bar value:
3
P+
-
+
OK
-
PTV
MENU
?
OK
TV
A
B
REC
Ȅ
AV
698-05S-GB
store ?
OK
12. Operation without remote control
This mode is only intended for an emergency when the battery in
the remote control handset is flat, or if the remote control is not
available.
The TV controls are underneath a cover at the front of the set.
You can control the following functions on the TV without the
remote control handset. The preselection of the function is valid
for 10 seconds, only 5 of which are shown in the permanent display.
44
Programme selection:
Press the - P + keys.
Volume:
Hold down the preselect key until the bar display for the volume
appears on the screen. Now press the - P + keys to adjust the
volume.
Contrast:
Hold down the preselect key until the bar display for contrast
appears on the screen. Then press the - P + keys to adjust the
contrast.
13. Connecting peripheral equipment
Camcorders
Videorecorders
Video recorders can be connected to the TV set via the antenna socket or a EURO socket.
We recommend connection via a EURO (Scart) socket, since only such sockets have separate inputs and outputs for the picture
and sound signals.
Camcorders can be connected to the TV set with special cables (available from your dealer).
The following connection diagram applies in principle to all of our products, although the various sockets may be located in different positions
on different units.
TV set (rear view)
Euro 1
Euro 1 for S-VHS
Euro 3 for VHS
Phono-Scart cable for VHS-Scart or S-VHS-Scart connection
Metz-cable 087928010
Euro 2
e.g. hama Item No. 42387 or hama Item No. 42394
Euro or Scart cable
1
AV
Video recorder (rear view)
Camcorder (video camera)
Metz-cable 087928010
only for copying S-VHS/Hi-8 films from EURO 2 to AV 3
In (phono input)
45
13. Equipment configuration
Connecting external
devices
In the menu „Device connection“, you can define which AV devices are connected to the various sockets on the TV set. The box „Devices“
contains a list of common AV devices. Only certain devices can be connected to the FRONT sockets.
Wherever possible, the AV devices should be connected to specific EURO sockets, namely:
EURO 1: VHS or S-VHS video recorder + Pay-TV decoder, video recorder with data transfer to/from TV set, PC, games console ( e.g.
Nintendo), laser disk, photo CD, SAT receiver, Pay-TV decoder, SAT/Set Top unit, S-VHS playback unit.
EURO 2: S-VHS/Hi8 video recorder, S-VHS/Hi8 video recorder + Pay-TV decoder, VHS video recorder, SAT receiver.
EURO 3: VHS video recorder, VHS video recorder + Pay-TV decoder, games console (e.g. Nintendo), laser disk, photo CD, SAT receiver, Pay-TV decoder.
The connections are pre-programmed in the factory as shown in the picture for step 2.
Press this key on the remote
control....
The screen displays
MENU
1. Call the „Device
connection“ menu
return
Help
Device connection Devices
▲
▼
9
yellow
EURO2: Video
Video Rec. 1
+
white
EURO3: Video
Camcorder
3
4
5
6
7
8
--/-
0
P+
-
red
OK
picture
EURO1: Video
Video Rec. 2
2
MENU
?
TV
blue
1
PTV
MENU
?
yellow
A
B
Ȅ
REC
AV
red
Signal type
selection
698-05Q-GB
MENU
2. Change the device
connections
return
▲
▼
yellow
EURO2: Video
Video Rec. 1
+
white
EURO3: Video
Camcorder
4
5
6
7
8
--/-
0
yellow
Device connection Devices
9
3
blue
Help
P+
-
OK
picture
EURO1: Video
Video Rec. 2
2
PTV
MENU
?
white
A
B
REC
P-
P+
Ȅ
no device
Video Rec. 1
Video Rec. 2
Video Rec. 3
VTR+DEC(1)
VTR+DEC(2)
VTR+DEC(3)
Camcorder
Mixer
PC
Decoder A
Decoder B
Laser Disk
Photo CD
SAT/SetTop
Games
?
TV
blue
1
Explanation
AV
red
Signal type
selection
698-05Q-GB
no device
Video Rec. 1
Video Rec. 2
Video Rec. 3
VTR+DEC(1)
VTR+DEC(2)
VTR+DEC(3)
Camcorder
Mixer
PC
Decoder A
Decoder B
Laser Disk
Photo CD
SAT/SetTop
Games
In the „Device connection“ menu, you can assign one
of the defined AV devices to each of the EURO sockets.
The abbreviations in the box on the right have the
following meanings:
Video rec. = video recorder (up to 3 may be connected).
Video rec. 1 is the video recorder which is always
connected; Video rec. 2 and 3 are used for copying
from one recorder to another.
VTR+Dec. = video recorder and Pay-TV decoder (e.g.
Premiere), where the decoder is connected only to the
video recorder.
Camcorder = video camera
Decoder = Pay-TV decoder (e-g- Premiere)
SAT = external satellite receiver
Game = games console
The default settings can be modified to meet your own
requirements. You should, however, note the following
input and output signal allocations when doing this.
S-VHS / Hi8
(= Y/C =S-Video)
EURO 1
EURO 2
EURO 3
VHS
(= Video)
RGB
Input
Output
Input
Output
Input
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
Yes
Yes
Yes
To change the settings, select the appropriate EURO
socket with the coloured keys and then select the
device to be connected with the P and P- keys.
+
MENU
return
TV
3. Change the signal type
1
2
3
4
blue
EURO1: Video
Video Rec. 2
5
6
7
8
9
yellow
--/-
0
EURO2: Video
Video Rec. 1
white
EURO3: Video
Camcorder
P+
OK
-
P-
P+
P-
TV
MENU
?
A
B
REC
4. Store the settings and
return to TV picture
OK
46
TV
?
Help
Device connection Sign. type
+
red
picture
Ȅ
AV
red
698-05R-GB
Signal type
selection
Video Rec. 2
controls AV
operation
Video
RGB
YC in
continuous
AV operation
Video
RGB
YC in
TV picture
▲
▼
When the devices are selected, the signal type is
always set to „video“. Pressing the red key displays a
box for selection of the signal type.
Differences between the signal types:
• continuous AV operation: the screen displays the
picture provided by the AV device. The channel setting
of the TV set has no effect.
• . . . controls AV operation: if the AV device is set to
„play“, the screen displays the picture provided by the
AV device; if the AV device is set to „stop“, the screen
displays the picture of the selected TV programme
position.
13. Connecting peripheral equipment
Video recorder
Video Rec. 1
or
Video Rec.2
Metz cable 087928010
only for copying S-VHS/Hi-8 films from
EURO 2 to AV 3 In (phono input)
Video Rec. 1
S-VHS/i8 Video recorder
Fully assigned SCART or EURO cable, for S-VHS/Hi8 playback only
AV
VHS Video recorder
Euro 1/2/3
Connections on the rear of the TV set
A video recorder can be connected to the TV set via the aerial socket or via one of the EURO sockets.
We recommend connecting the video recorder via a EURO (Scart) socket, since only these sockets have separate inputs and outputs for the video and audio signals.
A VHS video recorder can be connected to any of the three EURO sockets. An S-VHS/Hi8 video recorder must be connected to the EURO
socket 2 if you wish to take advantage of the full picture quality provided by such a recorder (see the table on page 44). A second
S-VHS/Hi8 video recorder can be connected to EURO socket 1 to play back films recorded on the S-VHS/Hi8 video recorder connected to
the EURO socket 2.
47
13. Connecting peripheral equipment
Video recorders
Video signal
In the following example, video recorder 2 is to be connected to the EURO 1 socket.
☞ Video recorder 1 is programmed in the factory on programme position 0. For this reason, connect the video recorder via a EURO cable to
the EURO 2 socket, insert a recorded cassette, press the ı key and select programme position 0 on the TV set.
Example: Connect Video recorder 2 to the EURO 1 socket, as shown on page 43.
Press this key on the remote
control....
1.Select any desired programme position and call the
station table
The screen displays
return
MENU
TV
2
3
4
5
6
7
8
9
20
21
22
23
24
25
26
27
28
29
Channel
Logo
▲▼
red
0
picture
?
Help
Select any desired programme position (in this
example: position 25).
Help
The video signal is normally supplied directly by the
aerial.
Help
In order to display the picture from the video cassette
on the screen, the video signal must be set to
„EURO1“.
Station table
Prog.
1
Explanation
PRO7
41
RTL2
24
VOX
29
DSF
52
EUSPO
28
PREMI
46
DISCO
12
MTV
42
MDR
53
CNN
61
>> further settings
Std., Pict., Sound
Signal
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
698-11A-GB
white
return
MENU
2. Call the submenu
„Video signal“
TV
picture
?
Station table
Prog.
Logo
▲▼
20
21
22
23
24
blue
25
yellow
26
27
white
28
green
29
white
Channel
PRO7
RTL2
VOX
DSF
EUSPO
Aerial
PREMI
EURO1:
DISCO
MTV
EURO2:
MDR
EURO3:
CNN
Signal
41
24
29
52
28
PREMI 46
Video Rec.
12 2
42 1
Video Rec.
53
Decoder 61
A
Aerial
Aerial
Aerial
Aerial
Aerial
Antenne
Antenne
Antenne
Antenne
Antenne
>> weitere Einstellungen
Std., Pict., Sound
Ȅ
698-11B-GB
MENU
return
TV
3. Select the video signal
EURO 1: „LogicVTR+D“
?
Station table
Prog.
Logo
▲▼
20
21
22
23
24
blue
25
yellow
26
27
white
28
green
29
yellow
picture
Channel
Signal
PRO7
41
RTL2
24
VOX
29
DSF
52
EUSPO
28
Aerial
PREMIdirect
46
EURO1:
DISCO Video Rec.
12 2
MTV
42 1
EURO2:
Video Rec.
MDR
53
EURO3:
Decoder 61
A
CNN
Aerial
Aerial
Aerial
Aerial
Aerial
Antenne
Antenne
Antenne
Antenne
Antenne
>> weitere Einstellungen
Std., Pict., Sound
Ȅ
698-11C-GB
4. Store the setting and return
to the TV picture
OK
48
TV
TV picture
13. Connecting peripheral equipment
Video recorders
Connecting a video recorder via the aerial socket
• Connect the aerial output (RF-out) of the video recorder to the aerial socket of your TV by means of the aerial cable.
• Load a recorded video cassette in the video recorder.
• Start playback or switch on the test pattern of the video recorder. The test pattern of most video recorders is located within the standard
channels Ch 30 to Ch 40 (see operating instructions of the video recorder).
• Execute a station search, beginning with standard channel 25. See Section 3. Presetting TV stations, station search.
• If the playback picture or the test pattern of the video recorder is displayed on the screen, then this channel can be stored. See Section
3. Presetting TV stations.
• In order to ensure optimum picture quality at all times, select the option „VCR
Press this key on the remote
control....
1. Select the station table and
call the picture submenu
On“. To do so, proceed as described below.
The screen displays
MENU
return
TV
Explanation
picture
Help
?
Station table
Programme
Std
Pict.
Sound
EURO1
ARD
ZDF
SAT 1
Auto.
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
▲▼
0
1
2
3
4
5
6
7
8
9
red
yellow
yellow
Sharpness
Noise reduction
CTI
Comb filter
further
blue
white
green
red
The picture quality of a video film can be improved in a terrestrial programme position with a
standard channel.
The video signal for this programme position
must be set to „Aerial“.
1
A2
On
<< weitere Einstellungen
store ?
Logo, Channel, Signal
OK
698-11D-GB
2. Call the second picture submenu and adjust VCR
MENU
return
TV
picture
Help
?
-
+
OK
Programme
Std
Pict.
Sound
EURO1
ARD
ZDF
SAT 1
blue
Auto.
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
▲▼
green
0
1
2
3
4
5
6
7
8
9
-
red
yellow
white
green
red
Chrom. adjustm.
Col. offset adj.
Contrast adj.
Picture format
VCR
0
0
0
4:3
On
Set the „VCR“ function to „On“ with the
keys and press the OK key to store the setting in
the programme position.
Press the
TV
+
Station table
To ensure optimum picture quality the „VCR“
function must be switched on.
key to return to the TV picture.
<< weitere Einstellungen
Logo, Channel, Signal
store ?
698-11E-GB
OK
49
13. Connecting peripheral equipment
Pay-TV decoder
50
Euro 1/2/3
VHS Video recorder
Euro 1/3
Decoder (e.g. Premiere)
Metz cable 087928010
only for copying S-VHS/Hi-8 films from
EURO 2 to AV 3 In (phono input).
S-VHS/HI8 Video recorder
Decoder (e.g. Premiere)
EURO
Euro
2
Connections on the rear of the TV set
EURO
Euro
1/2/3
This Pay-TV decoder decodes the scrambled signals of a Pay-TV station (e.g. Premiere) so that they can be displayed on the screen of the
TV set. For connection of a Pay-TV decoder, you need a EURO (=Scart) cable in which all 21 pins are assigned.
If you want to record Pay-TV programmes with a video recorder, we recommend that you connect the Pay-TV decoder directly to the video
recorder. If this is not possible, the Pay-TV decoder can be connected to the EURO 1 or EURO 3 socket (see also „Connecting external
devices“ on page 44).
The following diagram shows the connection of a Premiere decoder Typ G2.
13. Connecting peripheral equipment
Pay-TV decoder
For the following explanation it is assumed that the Pay-TV decoder A (Premiere) is connected to the EURO 3 socket.
The following settings must be made on the TV set:
Press this key on the remote
control....
1. Select the Pay-TV programme position and call the
station table
The screen displays
MENU
return
TV
Explanation
picture
Help
?
Station table
Prog.
▲▼
20
21
22
23
24
25
26
27
28
29
red
Channel
Logo
PRO7
41
RTL2
24
VOX
29
DSF
52
EUSPO
28
PREMI
46
DISCO
12
MTV
42
MDR
53
CNN
61
>> further settings
Std., Pict., Sound
Signal
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
698-11A-GB
MENU
return
TV
picture
Help
?
2. Call the submenu „Signal“
The video signal is normally supplied directly from the
aerial.
Station table
Prog.
Logo
▲▼
20
21
22
23
24
blue
25
yellow
26
27
white
28
green
29
white
PRO7
RTL2
VOX
DSF
EUSPO
Aerial
PREMI
EURO1:
DISCO
MTV
EURO2:
MDR
EURO3:
CNN
Channel
Signal
41
24
29
52
28
PREMI 46
Video Rec.
12 2
42 1
Video Rec.
53
Decoder 61
A
Aerial
Aerial
Aerial
Aerial
Aerial
Antenne
Antenne
Antenne
Antenne
Antenne
>> weitere Einstellungen
Std., Pict., Sound
Ȅ
698-11B-GB
return
?
+
20
21
22
23
24
blue
25
yellow
26
27
white
28
green
29
Channel
Signal
Help
A Pay-TV signal must always be unscrambled in a
decoder before it can be displayed on the screen.
You can switch between „Aerial direct“ and „Aerial via
decoder“ with the aid of the
keys.
+
Logo
▲▼
PRO7
41
RTL2
24
VOX
29
DSF
52
EUSPO
28
Aerial
PREMIvia Decoder
46A
EURO1:
DISCO Video Rec.
12 2
MTV
42 1
EURO2:
Video Rec.
MDR
53
EURO3:
Decoder 61
A
CNN
-
Ȅ
698-11F-GB
OK
picture
Station table
Prog.
4. Store the setting and return
to TV picture
TV
-
MENU
3. Select video signal „via
decoder“
Aerial
Aerial
Aerial
Aerial
Aerial
Antenne
Antenne
Antenne
Antenne
Antenne
>> weitere Einstellungen
Std., Pict., Sound store?
OK
Note:
You can call the Premiere Info-Service only if the
RBG priority is set to „Yes“ in the menu „Equipment configuration“. See Section 5. Equipment
configuration, RGB priority.
TV
51
14. Technical data
Mains voltage:
230 V ac, 50/60 Hz
14.1 Upgrade kits
• Multi-standard upgrade kit 031 NB 1038
For reception of „Standard M“ and „Standard L“ stations.
Power consumption:
Power consumption
(to CENELEC/TC 59 X):
Music power output to DIN 45324
at 4 Ohms and 1 kHz
(sine output)
Hawaii
ca. 106 W
2 x 12 W
(2 x 8 W)
Linea
ca. 125 W
2 x 12 W
(2 x 8 W)
Elba
ca. 105 W
2 x 12 W
(2 x 8 W)
Gemini
ca. 130 W
2 x 12 W (2 x 8 W)
1 x 24 W
Morea
ca. 106 W
2 x 12 W
(2 x 8 W)
Consumption of energy per hour:
Elba
Hawai
Linea
Gemini
Morea
• NICAM upgrade kit 041 NB 1048
• SAT upgrade kit 081 NB 1010
For satellite reception without an additional receiver.
• SAT upgrade kit 082 NB 1014
SAT receiver to replace the terrestrial receiver.
• SAT upgrade kit 083 NB 1018
A SAT receiver. Can also receive uncoded ADR (Astra Digital
Radio) transmissions.
• MVS - Video recorder control 013 ZC 1048
For transfer of programmed TV timer data to video recorder.
Contact your dealer for further upgrade kits.
105 Wh
106 Wh
125 Wh
130 Wh
106 Wh
Standby (all sets):
ca. 2.8 W
Aerial input:
Channel coverage:
75 Ohms, asymmetric DIN 45325
Standard channels 2...12, 21...69
Special channels S1...S20, S21...S41
S42...S46 (Belgian OIR channels)
14.2 Maintenance and care
Guarantee
When you purchase the television, ensure that your dealer includes the completed TV „passport“. It must specify the date, the
dealer’s stamp and signature. Keep this document in a safe place,
together with the invoice. Any claims under the warranty will only
be accepted if these documents are submitted. Keep your TV
clean and handle it with care.
Repairs
The TV should only be opened and repaired by qualified service personnel!
CAUTION! DANGER!
Consult your dealer when repairs are necessary.
Cleaning the set
Always switch off the TV with the ON/OFF key before
you clean it!
Use a soft, dry or slightly moist cloth to clean the cabinet. Do not
use any strong detergents as they may damage the finish and
labels. Use a damp chamois leather to clean the screen.
Any unauthorized attempts to open or repair the TV may result in
the guarantee becoming null and void.
Adequate shielding is provided against X-ray radiation (see
approval certificate on the rear panel of the TV).
Changing the high voltage or fitting a different type of picture tube
may cause an increased amount of X-ray radiation. Televisions
modified in such a manner are no longer in keeping with this
approval certificate and must not be used!
52
15. Glossary
2-channel sound transmission:
Separate reproduction of 2 sound channels, e.g. 2 different languages.
Audio
Latin for „I hear“ - The sound frequency range audible to the
human ear is between 60 to 20,000 Hz approx.
Camcorder
A video camera with integrated video recorder.
Cinch (phono)
Single-pole plug connector for separate audio and/or video
copying.
Decoder
An electronic circuit that decodes TV signals; required to receive
coded TV transmissions, such as Premiere.
Dual-Band LNC
An LNC that can simultaneously process two transponder frequency ranges (11 GHz and 12 Ghz)
EURO socket assignments:
• Sound effects
Spatial sound or stereo wide can be activated or deactivated.
• Muting - 12 dB
The sound can be muted by 12 dB.
Function keys - Teletext
• No function
No function has been assigned to this key.
• Riddle solutions
Display of the hidden answers to riddles
• Large font
Doubles the font size in teletext.
• Stop page
Running through multiple pages consisting of more than 15
subpages is automatic. This can be stopped at any page with
the „Stop page“ key so that „leafing“ can be continued
manually.
Noise reduction
Can be switched on to enhance the picture quality.
S-VHS / Hi8
(= Y/C =S-Video)
EURO 1
EURO 2
EURO 3
VHS
(= Video)
RGB
OSD (On Screen Display)
Convenient display of all functions to adjust the television. They
are superimposed on the current programme.
Input
Output
Input
Output
Input
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Phono (cinch)
No
No
Yes
Yes
Yes
Single-pole plug connector for separate audio and/or video
copying.
FBAS = CVBS
C = composite, V = video, B = blanking, S = signal
Function keys - Television:
• No function
No function has been assigned to this key.
• Subtitles
Displays the subtitle with corresponding transmissions.
• Large subtitles
50% enlarged subtitles are displayed with corresponding programmes.
• Logo
The display of the station logo is meaningful only if a PIP upgrade kit has been installed.
• Picture format (variable zoom)
Changes from 4:3 to 16:9 in the presence of a switching voltage.
• Zoom 2:1
The picture can be zoomed to double its size and then back
again to 1:1
RGB control
R = red, G = green, B = blue. Indicates separate colour signal
processing.
Spatial sound
Mono transmissions can be reproduced with an artificial stereo effect.
Standard channels
02-12 and 21-69 can be received by way of the aerial and cable
system.
Standby mode
The TV has been switched off with the remote control, or it has
switched itself off.
Stereo wide
For stereo broadcasts, the distance between the speakers can
be increased artifically to achieve a wider stereo effect.
Timer
Used to program automatic recording, or to switch a video recorder or TV automatically on and off at a preset time.
53
16. Remote control handset for video recorders
The remote controls RB11 are capable of controlling the basic functions of the current series of Metz video recorders. Remember to point
the remote control at the video recorder !
In order to permit control of a video recorder, function key B for the TV level must be programmed to „VTR operation“ in
the menu „Equipment configuration/Assigning the function keys“ on the TV set.
Whenever a key is pressed, an indicator on the remote control unit blinks.
RB 11
100 Hz
• Video recorder timer ON/OFF
• REW (rewind)
From STOP: fast rewind
From PLAY: picture search reverse
VTR
1
2
3
4
5
6
7
8
9
• Programme position selection
0
• Next programme
-/--
TIMER
P+
ľľ
OK
ıı
+
-
• AV link: switches the TV set between
TV and video rec. modes
• Terminates playback or recording
• Video recorder On/OFF
P-
• Stop
ı
TV
MENU
ı
?
ľľ
• Still - Pause
A
ɚ
54
ıı
• Index - Video index search forward
• Index - Video index search reverse
• To switch the remote control to video
recorder mode:
Press and hold this key and press
the desired function key.
In order to permit control of a video
recorder, function key B for the TV level
must be programmed to „VTR operation“
in the menu „Equipment configuration/Assigning the function keys“
on the TV set.
• Next programme
• Play - Start playback
• Slow-motion playback
• Operator help for video rec. operation
• FF (fast forward)
From STOP: fast forward
From PLAY: picture search forward
B
REC
Ȅ
AV
• Switch to AV mode AV 1, AV 2, ....
• REC - Start recording
ķ INFO
PRG.
ɮ
IJ
17. Index
Access to riddle solution . . . . . . . . . . . . . . . . . . .40
Aerial connection . . . . . . . . . . . . . . . . . . . . . . . . . .4
Allocating a station logo . . . . . . . . . . . . . . . . . . . .12
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Audio standard values . . . . . . . . . . . . . . . . . . . . .14
Autostore function . . . . . . . . . . . . . . . . . . . . . . . . .9
AV equipment, connecting . . . . . . . . . . . . . . . . . 45
AV recording . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13, 14
Bass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13, 14
Brightness, luminance . . . . . . . . . . . . . . . . . .13, 14
Channel entry . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Childlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Chrominance, colour intensity . . . . . . . . . . . .13, 14
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Connecting peripheral equipment . . . . . . . . .44, 45
Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13, 14
Cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Copying (programme positions) . . . . . . . . . . . . . .10
CTI function . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
CVBS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Direct page selection . . . . . . . . . . . . . . . . . . . . . .33
Double font size . . . . . . . . . . . . . . . . . . . . . . . . . .35
Entering the time manually . . . . . . . . . . . . . . . . .24
Equipment configuration . . . . . . . . . . . . . . . . . . .15
Erasing marks . . . . . . . . . . . . . . . . . . . . . . . . . . .39
FBAS (CVBS) . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Fine tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Forced mono . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Frame freeze . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Function keys . . . . . . . . . . . . . . . . . . . . . . . . .15, 53
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Infotext . . . . . . . . . . . . . . . . . . . . . . . . . . . .3, 36-39
Language selection . . . . . . . . . . . . . . . . . . . . . . . .5
Logo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Moving stations . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Multiple pages . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Noise reduction . . . . . . . . . . . . . . . . . . . . . . .20, 53
Operator help . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Page selection by cursor . . . . . . . . . . . . . . . . . . .33
Peripheral equipment . . . . . . . . . . . . . . . . . . .44, 45
Picture format . . . . . . . . . . . . . . . . . . . . . . . . .21, 53
Picture settings . . . . . . . . . . . . . . . . . . . . . . . .13, 22
Picture sharpness . . . . . . . . . . . . . . . . . . . . .13, 20
Premiere decoder . . . . . . . . . . . . . . . . . . . . . .49, 50
Presetting stations . . . . . . . . . . . . . . . . . . . . . . . . .8
Programme selection . . . . . . . . . . . . . . . . . . . . . . .7
Reminder time . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
RGB priority . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Riddle solutions key . . . . . . . . . . . . . . . . . . . . . . .40
Setting marks . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Sorting stations . . . . . . . . . . . . . . . . . . . . . . . . . .10
Sound channels1/2 . . . . . . . . . . . . . . . . . . . . . . .29
Sound effects . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Sound mute . . . . . . . . . . . . . . . . . . . . . . . . . . .3, 13
Spatial sound . . . . . . . . . . . . . . . . . . . . . . . . .17, 53
Standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Station closedown . . . . . . . . . . . . . . . . . . . . . . . . .5
Station search . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Stereo wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Stop page . . . . . . . . . . . . . . . . . . . . . . . . . . . .32, 53
Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Switch ON/OFF time . . . . . . . . . . . . . . . . . . . . . .25
Thunderstorms . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Time settings . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Treble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
TV menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5, 6
Variable zoom . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Video recorder, connecting . . . . . . . . . . . . . . .44-48
Video signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Video standard values . . . . . . . . . . . . . . . . . . . . .13
Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13, 14
Volume adjustment . . . . . . . . . . . . . . . . . . . . . . .18
Mains connection . . . . . . . . . . . . . . . . . . . . . . . . . .4
Mark-by-mark advance . . . . . . . . . . . . . . . . . . . .38
Megatext (Teletext) . . . . . . . . . . . . . . . . . . . . . . .30
Subject to technical changes. Errors and omissions excepted.
55
Quality – A matter of principle.
With the trend-setting Metz technology you will allways
make the correct choice. See your Metz dealer.
He will be happy to demonstrate the current Metz range.
Televisions sets
Video recorders
mecablitz electronic
flashguns
Metz-Werke GmbH & Co KG
Postfach 1267, D-90506 Zirndorf
Internet: http://www.metz.de
E-Mail: info@metz.de
Tel.: (0911) 9706-0
Fax:: (0911) 9706-340
DVD players
Availability and technical
details subject to change
without notice
Printed in Germany
Always first class !
ķ
698 47 2018.A3