Amana PTC 153G Specifications

Packaged Terminal Air Conditioners and Heat Pumps
with our DigiSmart™ Control Board & EMS
PTAC Specifications and Accessories Catalog
First YearWarranty: Parts & Labor
Second through Fifth Year: Parts & Labor on certain sealed system components
Second through Fifth Year: on certain functional parts only
* Complete warranty details available at ­www.amana-ptac.com.
Assembled in the USA for 30 years:
Units are 100% run-tested and tripletested for leakage.
MC-DPTAC
www.amana-ptac.com
9/10
Supersedes 4/10
Standard Features
• Energy Efficiencies: With EERs up to 12.1 and COPs up to 3.4, our unit’s high efficiencies may qualify you for many of the rebates
offered by electrical power companies.
• Quiet Operation: Our PTAC has been redesigned to be the quietest PTAC we’ve ever built. The unit’s state-of-the-art design and
construction provide a quiet environment, allowing guests to enjoy peaceful, sleep-filled nights.
• Two fan motors (indoor/outdoor)
• Indoor tangential fan for quiet operation
• STC of 28
• Assembled in the USA for 30 years: assembled at our plant in Fayetteville, TN, using Goodman resources including
engineering, production, and testing.
• Increased Dehumidification Capacity: Maintain lower humidity levels in rooms while cooling them without the need
for expensive add-ons. As a result, guests feel more comfortable at higher temperatures, thus reducing cooling costs.
• 7-Button Touch Pad: Provides complete control to guests for in-room comfort
while maintaing energy efficiency.
• 5-Year Limited Warranty: Enjoy one of the most comprehensive warranties in the industry: 1st Year: parts & labor; 2nd through
5th year: parts & labor on certain sealed system components; 2nd through 5th year: on certain functional parts only. For
complete warranty details, visit www.amana-ptac.com.
• 100% Run Tested: All units are 100% run tested at our plant in Fayetteville, TN, including leak checks during manufacturing and
again prior to shipment at the warehouse.
• 7⅝” Unit Front Depth: Enhance valuable room space with our slim unit front, which has a sleek 7⅝” depth, one of the shallowest silhouettes in the industry today. In addition, to inhibit guest-tampering, the front can be secured to the chassis with a
hidden screw.
• Removable Condenser Shroud: Allows easy access to enable regular cleaning of coils, which is essential to maintain unit efficiency
and protect the compressor for long unit life.
• Easy Pull-Out Filters: Our filters are washable and easy to maintain.
• Filter Dryer for Sealed System Refrigerant: Standard in all units to protect the compressor and lengthen the life of the unit by removing moisture and preventing acid formation.
Control Board
Removeable/Cleanable Shroud for easy
cleaning
Easy Pull-up Filters
Filter Dryer
2
www.amana-ptac.com
MC-DPTAC
Standard Features (cont.)
• Condensate Dispersion System: Our condensate dispersion system removes condensate from indoor cooling operation by throwing
water directly on to the outdoor coil for rapid evaporation and increased cooling efficiencies. The slinger ring on the new,
enhanced fan draws water up and into the fan blades. This water is then atomized and evaporated into the atmosphere
through the condenser. Increased surface area from the coil allows more water to be evaporated on the sides of the coils and
helps to minimize condensate run-off.
• Front Desk Control: Each unit comes equipped with the DigiSmart™ control and energy management software. With Digi-Smart™
using the optional RF antennae, all units can be wirelessly connected to a central hub for enhanced energy savings and
diagnostics. Amana brand PTACs also have a low-voltage interface capability with a field-supplied front-desk ON/OFF switch.
(See Page 4.)
• Room Freeze Protection: When the unit senses temperatures of 40°F or below, the unit activates the fan motor and either the
electric resistance heater or the hydronic heater.
• Easy-to-use Controls: No complex controls to confuse your guests and create phone calls for your manager. Controls are easy to
read, understand, and activate. Our new 7-button control panel provided guests with complete control of the unit for their
in-room comfort while maintaining overall energy efficiency.
• Easy to Service with On-Board LED Diagnostics: The main components are easily serviced and there is no guessing to determine the
problem with our easy-to-read diagnostics.
• Stonewood Room Front: Our Stonewood room front strikes the balance between attractive styling and practical design. Distinctive contours and a modern appearance enhance the character of even the most luxurious room, while the sleek 7⅝” depth
maximizes usable space for your guests.
• Remote Thermostat Control: When the DigiSmart™ wireless remote thermostat is set up, both the remote thermostat and unit control panel continue to control the unit, providing flexibility and home-like system control. Installation requires no more than
pressing two buttons. No need to run wires or make electrical connections.
• Remote Temperature Sensing: Guests enjoy ultimate comfort with consistent climate control. When the field-installed thermistor
(RTS03) is used, the unit-mounted thermostat is overridden to allow more accurate, internal wall-sensing of room ambient
temperature.
• Extended Heat Pump Heating: Heat pump models will operate in the heating mode down to as low as 24°F outdoor ambient temperature.
• Zero Floor Clearance: The unit can be installed flush to a finished floor, if desired. (Some accessories do not have zero clearance).
• 30-Second Fan-Off Delay: The fan continues to run 30 seconds after the compressor has stopped in either cooling or heat pump
mode and after electric heat has been turned off. This improves efficiency by dispersing the conditioned air on the coils into
the room.
• Compressor Lock-In: This feature helps prolong the life of the compressor by preventing short-cycling. When the compres-sor is
switched from Off to On because room temperature has risen or fallen below the specified limit, it will remain on for at least
4 minutes. If the temperature set-point is changed during this 4 minutes, the lock-in feature is overridden.
• Automatic Emergency Heat: No more “my unit is not heating” complaints during the middle of the night. Heat pump units will
automatically switch over to electric resistance heat if the heat pump compressor system fails or if the heating load is greater
than the unit capacity.
• Constant Fan Mode: Take advantage of each unit’s dual options — select continuous fan operation or cycle the fan ON and OFF
with the thermostat. Our new 7-button design allows guests to select fan performance while allowing the owner to have the
unit revert to the desired program of continuous fan or cycle with conditioning.
• Hidden Ventilation Control: The ventilation control lever is hidden from the occupant's view to allow you to manage ventilation
requirements.
• High-Pressure Switch: Protects the unit from high pressure and damage to the unit, helping to ensure long unit life.
MC-DPTAC
www.amana-ptac.com
3
brings together our best PTAC ever with our best Energy Management Software and now integration with
Property Management and Front Desk Management Software. Reduce PTAC energy consumption by 35% OR MORE* through
the power of the in-unit Energy Management System, programmable temperature set-back and limits combined. Reduce PTAC
maintenance cost through our automated maintenance notification system. Improved maintenance sustains energy efficiency
(EER) and prolongs PTAC life, keeping equipment running at its designed efficiency level and room guests more comfortable.
The Amana Brand DigiSmart Solution
In-Room: “Self-Installable” Wireless Peripherals
The DigiSmart Occupancy Sensor completes the in-room equipment. This infrared sensor can
determine if the room is occupied or empty and when empty, signal the PTAC to adjust the
temperature to save energy based on programmable setbacks.
The DigiSmart Wireless Remote Thermostat can mount on the wall anywhere in the guest room.
Battery powered and with its own wireless ability to communicate with the PTAC to maintain
room temperature. Best of all, no wires to run. The PTAC and Thermostat connect at the press of
a button and are permanently linked. The thermostat and PTAC work in-sync to display accurate
temperature.
The DigiSmart Wireless Antenna installs inside the PTAC with a snap-in connector. Installing the antenna allows the PTAC to
communicate wirelessly with other devices in the room and to the DigiSmart network.
> 45,000+ rooms have had wireless installations since 2005
> Total wireless devices deployed to date – 120,000+
The Amana brand DigiSmart PTAC with antenna, combined with the self-installable, wireless Thermostat and Occupancy Sensor
give the property owner complete control over the equipment settings and can reduce PTAC energy usage by 35% OR MORE.*
Site-Level —
Central Wireless Controller
> Site-wide PTAC Configuration
> Site-wide PTAC Diagnostics
> Front Desk System Interface
> Email Reporting
> Internet Accessible Web User
Interface Enterprise
* These savings represent estimated savings over time as compared to the same PTAC model without the DigiSmart EMS System installed and were generated
using general assumptions including energy loads, local weather averages and use of occupancy controls. Actual savings will vary according to actual use
habits, room square footage, and how the unit is installed.
4
www.amana-ptac.com
MC-DPTAC
Enterprise — Multiple Wireless Controllers
Central Monitoring and
Control of Multiple Properties
>
>
>
>
>
Data Warehousing
Savings Analysis
Email Reporting
Virtual Metering
Load Shedding
Web-Based, Real-Time Monitoring
Amana® Brand DigiSmart™ Controller:
All of the PTACs in the building can be managed through a single interface on a PC.
FEATURES INCLUDE: Full unit details for every PTAC, visible from the front desk or home office, automatic emails for PTAC
maintenance, ability to change all settings on the unit, and enhanced diagnostics. Monitor up to 170 PTACs, WIRELESSLY, with one
controller. Additional controllers can expand the network for additional rooms/properties.
> System Verification
> Global Setbacks
> EMS Configuration
> Site Statistics
> Battery Notices
> Email Reporting
> Unit Health
> Unit Code Alerts
Temp Limiting – Each PTAC
can be configured with a heating and cooling temperature
set-point limit.
Setbacks – Once a room is declared unoccupied by the occupancy sensor, the PTAC progresses through three different temperature
setbacks, configured as three degree and time pairs (An example configuration is listed below).
1st: 2°, 30 mins – Setback the temp 2 degrees after 30 minutes
2nd: 4°, 1 hr – Setback the temp 2 more degrees after 30 more minutes
3rd: 8°, 3 hrs – Setback the temp 4 more degrees after 2 more hours
Unrented Set-Points – By integrating with your property's Front Desk System, the PTACs will adjust to specific set-points when no
longer identified as rented in the system.
MC-DPTAC
www.amana-ptac.com
5
Product Specifications: PTC Models — Cooling/Electric Heat
230/208 Volts
PTC
073E**AXXX
Model ¹, 6, 8,9
Voltage ¹, ³
Capacity (BTU/h)
PTC
093E**AXXX
PTC
123E**AXXX
PTC
153E**AXXX
230 / 208
230 / 208
230 / 208
230 / 208
7,600 / 7,500
8,700 / 8,500
11,500 / 11,200
14,000 / 13,600
Amps10
3.5 / 3.5
4.1 / 4.1
5.6 / 5.6
7.0 / 7.0
Watts10
650 / 630
775 / 725
1095 / 1075
1415 / 1375
EER
11.7 / 11.9
11.2 / 11.7
10.5 / 10.4
9.9 /9.9
4.2
5
6.8
8.5
High
290
290
290
340
Low
264
264
264
314
High
310
310
310
360
Low
282
282
282
332
Ventilated Air, CFM (Fan Only)*
65*
65*
65*
65*
Dehumidification (Pints/Hr.)
1.7
2.2
3.6
4.4
Net Weight (lbs.)
99
103
106
117
Ship Weight (lbs.)
114
118
123
134
PTC
074E**AXXX
PTC
094E**AXXX
PTC
124E**AXXX
PTC
154E**AXXX
Unit without Electric Heater
Min. Circuit Amps ², 4, 10
CFM (Cool/Wet Coil)
CFM (Dry Coil)
265/277 Volts
Model ¹, 6, 8,9
Voltage ¹, ³
Capacity (BTU/h)
265
265
265
265
7,600
8,900
11,600
14,000
Amps10
3.0
3.6
4.8
6.0
Watts10
640
775
1,085
1,430
EER
11.9
11.5
10.7
9.8
3.6
4.4
5.9
7.3
High
290
290
290
340
Low
264
264
264
314
High
310
310
310
360
Low
Unit without Electric Heater
Min. Circuit Amps ², 4, 10
CFM (Cool/Wet Coil)
CFM (Dry Coil)
282
282
282
332
Ventilated Air, CFM (Fan Only)*
65*
65*
65*
65*
Dehumidification (Pints/Hr.)
1.7
2.2
3.6
4.4
Net Weight (lbs.)
99
103
106
116
Ship Weight (lbs.)
114
118
123
133
* Approximately 95 CFM with optional power vent kit. Actual vent CFM performance will vary due to application and installation conditions. See
Notes on following page.
6
www.amana-ptac.com
MC-DPTAC
Product Specifications: PTC / PTH Models — Electric Heat Performance
(Primary Heating for PTC Models; Auxiliary Heating for PTH Models; See below for Power Cord Configuration)
Voltage
Electric
Heat (kW)
No. of
Stages
Nominal Heating (BTU/h)
@ 230V
@ 208V
@ 265V
Total
Watts6
Total
Amps
Min. Circuit
Ampacity²
MOP4
(amps)
Power
Cord
230/208V
2.5
1
8,500
6,800
--
2,570 / 2,115
11.2 / 10.1
14.0
15
6-15 P
230/208V
3.5
1
12,000
9,900
--
3,570 / 2,935
15.5 / 14.1
19.4
20
6-20 P
230/208V
5
1
17,100
14,000
--
5,070 / 4,160
22.1 / 20.0
27.5
30
6-30 P
265V
2.5
1
--
--
8,500
2,570
9.7
12.1
15
7-20 P
265V
3.7
1
--
--
12,600
3,770
14.2
17.8
20
7-20 P
265V
5
1
--
--
17,100
5,070
19.2
23.9
25
7-30 P
* PTH/PTC09*E50*/* has the same airflow as a PTC/PTH12*E**** (not available on 7,000 BTU/h models).
Notes
¹ All 265-volt models must use an Amana® brand sub-base (PTSB4**E) or an Amana® brand hard-wire kit (PTPWHWK4).
² Minimum Circuit Ampacity (MCA) ratings conform to the National Electric Code; however, local codes should apply.
³ Minimum voltage on 230/208-volt models is 197 volts; maximum is 253 volts.
Minimum voltage on 265-volt models is 238.5 volts; maximum is 291.5 volts.
⁴ Overcurrent protection for all units without electric heaters is 15 amps. Overcurrent protection on 265-volt models must be cartridge-style time-delay
fuses (included and factory-installed on all Amana® brand 265-volt chassis). See heater performance for total MCA.
⁵ Heating capacity and efficiency based on unit operation without condensate pump; unit automatically switches to electric heat
at approximately 24°F outdoor ambient.
⁶ Total watts for 12,000 and 15,000 BTU/h models; subtract 70 watts for PT07/09*E**A*
⁷ Specify two-digit heater kW size to complete model number.
⁸ Total amps for 12,000 and 15,000 BTU/h models; subtract 0.2 amps for PT07/09*E*A*.
⁹ R-410A refrigerant used in all systems.
¹⁰ All units meet or exceed ASHRAE 90.1 standards.
¹¹ All units less than 250 volts have a Leak Current Detector Interrupter (LCDI) power cord and meet UL 484 standards.
¹² Refer to electric heat performance data for total MCA and recommended overcurrent protection. Amps and Watts notation refers to compressor only.
Nomenclature
PTC
07
3
E
1,2,3
4
5
6
35
AXXX
7,8,9 10,11,12,13
AA
14
Basic Model Type
Engineering PTC
Standard Cooler PTAC
Major & Minor Revisions
PTH
Standard Heat Pump PTHP
DRY
Dehumid Cooler PTAC
Features Code
Cooling Capacity
Standard Model
C
Corrosion Protec>on (Seacoast)
07
7000BTU/h
60 Hz
D
Power Door
09
9000 BTU/h
60 Hz
E
Future Use
12
12000 BTU/h
60 Hz
F
Fuse Holder
15
14000 BTU/h
60 Hz
H
Hydronic
P
Condensate Pump
Rated Voltage
Q
Quiet STC Kit
2
115V, 60 Hz, 1 Ph
R
RF Antenna
3
230/208V, 60 Hz, 1 Ph
V
Power Vent
4
265V, 60 Hz, 1 Ph
X
placeholder
W
Hard Wired
Y
High VA Transformer
Design Series
E
R-­‐410A
Heater Size
MC-DPTAC
A
00
No Electric Heat
15
1.5 kW
25
2.5 kW
Use up to 4 as needed in alphabe>cal order
35
50
3.5 kW (230/208V)
Exaqmples:
3.7 kW (265V)
PTC073E50AXXX
PTC073E35CDXX
5.0 kW
PTC073E50CXXX
PTC073E50CDQR
www.amana-ptac.com
7
Product Specifications: PTH Models — Cooling/Heat Pump/Electric Heat
230208 Volts
PTH
073E**AXXX
Model ¹, 6, 8, 9
Voltage ¹, ³
Capacity (BTU/h)
PTH
093E**AXXX
PTH
123E**AXXX
PTH
153E**AXXX
230 / 208
230 / 208
230 / 208
230 / 208
7,600 / 7,500
9,000 / 8,900
11,500 / 11,100
14,000 / 13,900
Amps10
3.5 / 3.5
4.1 / 4.1
5.6 / 5.6
7.0 / 7.0
Watts10
650 / 620
770 / 765
1095 / 1065
1460 / 1465
EER
11.7 / 12.1
11.7 / 11.6
10.5 / 10.4
9.6 / 9.5
Unit without Electric Heater
Min. Circuit Amps ², 4, 10
CFM (Cool/Wet Coil)
CFM (Dry Coil)
4.2
5.0
6.8
8.5
High
290
290
290
340
Low
264
264
264
314
High
310
310
310
360
Low
282
282
282
332
65*
65*
65*
65*
Ventilated Air, CFM (Fan Only)*
Dehumidification (Pints/Hr.)
1.7
2.2
3.6
4.4
Net Weight (lbs.)
108
112
115
126
Ship Weight (lbs.)
123
127
132
143
PTH
074E**AXXX
PTH
094E**AXXX
PTH
124E**AXXX
PTH
154E**AXXX
265
265
265
265
7,500
9,000
11,500
14,000
3.0
3.6
4.8
6.0
265,277 Volts
Model ¹, 6, 8, 9
Voltage ¹, ³
Capacity (BTU/h)
Amps10
Watts
635
780
1115
1430
EER
11.8
11.5
10.3
9.8
3.6
4.4
5.9
7.3
High
290
290
290
340
Low
264
264
264
314
High
310
310
310
360
Low
282
282
282
332
Ventilated Air, CFM (Fan Only)*
65*
65*
65*
65*
Dehumidification (Pints/Hr.)
1.7
2.2
3.6
4.4
Net Weight (lbs.)
108
112
115
125
Ship Weight (lbs.)
123
127
132
142
10
Unit without Electric Heater
Min. Circuit Amps ², 4, 10
CFM (Cool/Wet Coil)
CFM (Dry Coil)
* Approximately 95 CFM with optional power vent kit. Actual vent CFM performance will vary due to application and installation conditions.See Notes on
previous page
8
www.amana-ptac.com
MC-DPTAC
Product Specifications: PTH Models — Reverse-Cycle Heating Performance
230/208 Volts
Heating Capacity¹
Voltage ¹, ³
BTU/h
PTH
073E**AXXX
PTH
093E**AXXX
PTH
123E**AXXX
PTH
153E**AXXX
230 / 208
230 / 208
230 / 208
230 / 208
6,800 / 6,800
8,300 / 8,100
10,900 / 10,500
13,500 / 13,300
Amps10
3.5 / 3.5
4.1 / 4.1
5.6 / 5.6
7.0 / 7.0
Watts
605 / 605
735 / 720
1040 /1020
1365 / 1345
COP5
3.3 / 3.3
3.3 / 3.3
3.1 / 3.1
2.9 / 2.9
310
310
310
360
PTH
074E**AXXX
PTH
094E**AXXX
PTH
124E**AXXX
PTH
154E**AXXX
265
265
265
265
5
10
CFM (Dry)
265/277 Volts
Heating Capacity¹
Voltage ¹, ³
BTU/h
6,800
8,200
11,000
13,500
Amps10
3.0
3.6
4.8
6.0
5
Watts
585
730
1040
1365
COP5
3.4
3.3
3.1
2.9
CFM (Dry)
310
310
310
360
10
COP = Coefficiency of Performance; per ARI test procedures, units are rated for capacities and efficiencies.
See Notes on the previous page.
Power Cord Configuration
Power Cord Plugs
Power Receptacle Configuration
250V Rating Power Cord Plugs with LCDI Device
NEMA 6 Configuration
G
NEMA6-15R; 250V receptacle,
used on 230/208V units
G
NEMA6-20R; 250V receptacle,
used on 230/208V units
G
15 amp
20 amp
30 amp
277V Rating Power Cord Plugs
NEMA 7 Configuration
G
20 amp
MC-DPTAC
G
W
G
W
G
W
30 amp
www.amana-ptac.com
NEMA6-30R; 250V receptacle,
used on 230/208V units
NEMA7-20R; 277V receptacle,
used on 265V units
NEMA7-30R; 277V receptacle,
used on 265V units
All units come with factory-installed power cords.
All units less than 250 volts come with LCDI device.
9
Accessories
Custom Color Sleeves
We offer over 150 different custom colors to choose from for your wall sleeves.
In addition, we can custom paint the exterior a different color from the interior
to meet your needs.
Outdoor Grilles
Available in stamped-aluminum or architecturally louvered for application with
an Amana brand WS900D wall sleeve.
AGK—Extruded aluminum architectural grille available with anodized
aluminum finish and a baked-on paint finish for durability. Choose from
3 stock colors or a custom color to blend with your building’s exterior
color scheme.
CB (Clear Anodized),
DB (Dark Brown/Bronze),
TB (Stonewood Beige), WB (White), SB (Special/Custom Colors)
PGK—One-piece injection molded grille using a polymer blend of engineered thermoplastic high-impact strength material with chemical
resistance and an exterior UV protective coating.
Choose from 3 stock colors:
DB (Dark Brown/Bronze), TB (Stonewood Beige), WB (White)
Condensate Drain Kit
Attaches to the wall sleeve base pan for controlled internal or external disposal
of condensate.
Low-Voltage Wire Harness Kit
For quick connections of the remote, or wired, thermostats, wired EMS, or front
desk with jumpers and connectors.
Remote Escutcheon Kit (not shown)
Optional kit for use with units controlled via a wired, remote thermostat. Covers
control touch-pad for wired thermostat installations.
Subbase Kit
The fully skirted subbase conceals wiring while providing strong support, if
needed. Plug-in receptacle and field-wiring access speeds installation. Electrical
accessories, such as fuse holders, circuit breakers and disconnect switches, meet
N.E.C. requirements.
Standard Depth Sleeves
WS900E
Standard PTAC sleeve
WS900SC
Seacoast triple protected
WS900DINTERNAL
Internal drain only for
window-wall installations
(DK900D sold separately)
161/16"
Wall Sleeves
All our wall sleeves have industry standard dimensions of 42” wide x 16¹/16”
high. All Stonewood Beige G-90 metal wall sleeves are thermally insulated
and include a weather board for use during construction. The WS900D, SC
and INTERNAL 14⅛” depth is the industry standard. Sleeves may be shipped
separately to allow for installation during construction.
"
42"
14⅛
Extra Deep Sleeves
We offer sleeves in several depths for thicker wall
installations or special room configurations
WS9xxD1
16” to 24” in 1” increments
WS928D1
Extra deep 28”
WS930D1
Extra deep 30”
WS936D1
Extra deep 36”
Standard Outdoor Grille
SGK01B
SGK01TB
Single Pack
Stonewood Beige
SGK
Architectural Outdoor Grille
AGK01CB
AGK01DB
AGK01TB
AGK01WB
AGK01SB
PGK01DB
PGK01TB
PGK01TB
Anodized Aluminum (Silver)
Dark Bronze/Brown
Stonewood Beige
Amana White
Custom Colors
Dark Bronze/Brown
Stonewood Beige
Amana White
AGK
or
PGK
DK9001D
Condensate Drain Kit
(use with WS900E)
Condensate Drain Kit (use with WS900B)
PWHK01C
Wire Harness Kit
REK10B
Remote Escutcheon Kit (10-pack)
DK900D
PTSB320E
PTSB330E
PTSB420E
PTSB430E
PTSB000E
DK900D
Each kit contains 80 wires and wire nuts, enough to
attach a thermostat and one additional accessory
to 10 PTAC units. Wires come in assorted colors for
easy attachment.
Optional
Fuse Holder
Location
230/208V 15/20A
230/208V 30A
265V 15/20A
265V 25A
Non-electrical
Optional
Power Switch and Circuit Breaker
Location
Power Receptacle
Skirting
Skirting
Leveling Legs
Leveling Legs
Gives wall sleeve front support and helps to level the unit for installaiton.
Hard-wire Kits
Used to permanently wire to the chassis when a standard subbase and power
cord are not utilized.
10
LL28
Leveling legs for
WS9** sleeves
PTPWHWK4
Armored Cable - all voltages
PTQCO3A
Quick Connect - 230/208 V
PTQC04A
Quick Connect - 265 & 115 V
www.amana-ptac.com
Subbase Box Assembly
MC-DPTAC
Accessories (cont.)
Power Disconnect Switch
The PSHW**A power disconnect switch can be used for 265-volt or 230/208-volt
physical disconnect, where required by local codes. The switch is rated at 30amp capacity. The switch is for use with and Amana® brand standard subbases
or PTPWHWK4 Hard Wire Kit.
Fuse Holder Kit
Cartridge-style fuses can be installed in the fuse holder for use in the subbase or
chassis. Available in 15, 20 and 30 amp (included on 265-volt unit).
Circuit Breaker Kit (230/208V only)
The circuit breaker kit, available in 15, 20 or 30 amp, can be used with Amana
brand subbases. It gives overcurrent protection, and its location allows you to
turn the unit on or off without tools.
PSHW03A
230/208V
PSHW04A
265V
FHK315C
FHK315E
FHK330C
FHK330E
230/208V
230/208V
230/208V
230/208V
230/208V
230/208V
CBK3**C
Circuit Breaker Kit
FHK320C
FHK320E
15A
15A (R-410A)
20A
20A (R-410A)
30A
30A (R-410A)
Main Duct Kit
Duct Extension Kit
Extends air distribution to an adjoining room. Consists of a main duct for the room
of origin and an extension duct to reach the adjoining room and terminal duct.
PTDK01A allows for the new “B” series unit to work with the “A” series duct kits.
Extension Duct Kit
TRANSITION
BAFFLES
Terminal Duct Kit
MDK02B
Main Duct – R-22
TDK02
Terminal Duct
MDK02E
Main Duct – R-410A
PTDK01A
Transition Duct Only – R-22
EDK02B
Extension Duct
PTDK01E
Transition Duct Only – R-410A
Power Vent Kit
Installation of Power Vent increases CFM up to approximately 95. Vent door will
automatically close when unit fan is off.
Condenser Baffle Kit
For use on non-baffled­ grilles. These deflectors direct the air in toward the
center and away from the inlet to prevent recirculation of the hot condenser air.
PVK3A
230/208V – R-22
PVK4A
265V – R-22
PVK3E
230/208V – R-410A
PVK4E
265V – R-410A
DGK1B
Condenser Baffle Kit
Condenser Baffles
Condenser
Basepan
Subbase Extension Cover Kit
Converts older 30-amp subbases to allow for installation of the larger 30-amp
LCDI power cord and plugs.
Condensate Removal Pump
Can be field installed. Assists in removing condensate developed by heat pump
operation and transfers it to indoor coil to dissipate into room while adding
humidity to the room.
MC-DPTAC
SBEC10A
10 Pack
CDP302
230/208V – R-22
CDP402
265V – R-22
CDP302E
230/208V – R-410A
www.amana-ptac.com
11
Accessories (cont.)
Security Key Locks
In conjunction with the tamper-resistant front, the installation of Amana® brand
security key locks prevents tampering of the controls used to set temperature,
heating and cooling functions. UL approved for institutional use only.
Power Door Kit
Vent door will automatically open when unit fan is on.
Thermostats
The following thermostats offer remote control. Any thermostat other than
those listed must be submitted to Goodman Company, L.P., for approval prior
to use.
Hydronic Heat Kit
Add-on kits fit all units allowing the addition of hydronic water or hydronic
steam heat to cooling and heating units. The kits feature left- or right-hand
piping. Unit retains complete service access with a kit installed. Unit must be
connected to and operated by a wall thermostat.
HWK03B
Hydronic Water Kit – R-22
HVK03B
Hydronic Steam Kit – R-22
HWK03E
Hydronic Water Kit – R-410A
HVK03E
Hydronic Steam Kit – R-410A
Hydronic Valves
Water and steam valves are available for use with the HWK03 (water) and HVK03
(steam) heat kits. (See Architects and Engineers Manual for specifications.)
KL03B
Security Key Lock (R-22)
KL03E
Security Key Lock (R-410A)
PDK3A
230/208V – R-22
PDK4A
265V – R-22
PDK3E
230/208V – R-410A
PDK4E
265V – R-410A
Model
Heat
Stages
Cool
Stages
Display
C5200609
D9945801
1246005/6
1246001
1246003
1246004
1241501
1*
2**
1*
1*
2**
2**
2**
1
1
1
1
1
1
1
Mech.
Mech.
Mech.
Digital
Digital
Digital
Digital
Type
Manual
Manual
Manual
Manual
Manual
Program
Auto Change
Shape &
Orientation
Round
Rect./Horiz.
Rect./V or H
Rect./Horiz.
Rect./Horiz.
Rect./Horiz.
Rect./Vert.
Hydronic Heat Kit-Top View
Hydronic Heat Kit-Side View
Hydronic Heat Kit-Right View
VS2WNCA*
2-way/24V/NC/Steam
VS2WNOA*
2-way/24V/NO/Steam
VW2WNCA*
2-way/24V/NC/End Switch
VW2WNOA*
2-way/24V/NO/End Switch
VW3WNC2B*
3-way/24V/NC/NO/End Switch
* Poptop Actuator
Wireless RF (Radio Frequency) Controls
All DigiSmart PTACs come factory-ready to be controlled via wireless RF devices.
2.4 Ghz 802 15.4 protocolassures robust communications and response.
12
DS01C
Thermostat: 2-way communications
DD01C
Occupancy Sensor: EMS activation
DT01A
Antennae / Router
DP01E
Web-enabled Platform Server
DL01E
Web-enabled Platform Server Link
www.amana-ptac.com
MC-DPTAC
Accessories (cont.)
Remote Temperature Sensor
Unit can be wired to sense room temperature away from the PTAC to have
accurate readings.
RTS03
Remote wall-mounted sensor
Wired Energy Management Control
Includes PIR occupancy sensor power from the DigiSmart control and door
switch; cannot be used with a remote wired thermostat.
WEMR01W
Recess-mounted door switch
Wall Sleeve Extension Adapter Kits
Room-side extension kits to increase the depth of the existing sleeve to allow for
an industry-standard PTAC to be installed.
Curtain Baffle Kit
The color-matched polymer curtain baffles help to prevent curtains from falling
into the discharge air stream and causing recirculation, reducing efficiences and
shortening compessor life.
WEMS01B
Surface-mounted door switch (Brown)
WEMS01W
Surface-mounted door switch (White)
SECM10001A
Climate Master 12½” Sleeve
Extension (10 Pack)
SEZA0501A
Zone Aire 11½” Sleeve
Extension (5 Pack)
PTCB10B
10 Pack for R-22 units
PTCB10E
10 Pack for R-410A units
Monthly Maintenance
Intake Air Filters
It is extremely important to clean the inlet air filters once a month (or more often if operated in dusty or dirty locations or
conditions) to properly maintain the operational performance of the PTAC unit. The two intake air filters (constructed of durable
polypropylene) can be easily inserted into the cabinet front using the cabinet filter guides. Before cleaning the intake filters, turn
the unit off by setting the mode switch to the OFF position. Filters should be cleaned as required.The following procedure is used
to remove the intake filters:
1. Facing the unit, pull up on the filter handles located at the front top of the unit.
2. Pull each filter upward and remove.
3. Clean filters with vacuum or with running water. Reverse this procedure to reinstall the filters.
Note: Accessory filter kits are available from your sales person. All filters are permanent and cleanable. Consult your
I&O Manual for other monthly cleaning instructions.
Spare Filters
Helps keep dirt and lint out of the air and off the coil,
thus increasing the unit's efficiency. Amana® brand
filters are easy to remove, wash and replace.
FK10A
10-pack - A Series
FK10B
10-pack - B, C & D Series
FK10E
10-pack - E Series (This
model requires 2 filters
per change.)
Replacement Charcoal Filter Kit
Absorbs airborne odors caused by cigarette, pipe
or cigar smoke and odors caused by mold, mildew,
etc. Filters are made of polyester fibers coated with
activated charcoal and are individually wrapped. These
filters are permanent and can be washed or cleaned.
Call your Amana® brand PTAC sales person for details.
10 filters per pack.
MC-DPTAC
www.amana-ptac.com
CFK10A
10-pack - A Series (R-22)
CFK10B
10-pack - B, C & D Series (R-22)
13
Unit with Accessory Wall Sleeve and Sub-base Accessory
Top View
42"
40"
6 - 1 / 8"
24 - 5 / 16"
1"
9 - 9 / 16"
Location of external drain holes
on bottom flange of Wall Sleeve
Air
Flow
Air
Flow
Air
Flow
Control
Door
Air Discharge Grille
3
1"
3" Clearance
to side walls
"
Front View
58” LCDI CORD SET — 230V/208V UNIT*
42"
LEFT
R I GHT
16-1/16"
2-5/8"
Right View
AIR DISCHARGE GRILLE IS
REVERSIBLE TO PROVIDE EITHER
15° OR 40° DISCHARGE ANGLE
7/8"
STAMPED GRILLE
21-1/2"
14-1/8"
WALL SLEEVE
7-3/8"
1-3/8"
ARCH GRILLE
3-1/4"
MIN
2"
MAX
1" AND 3/4" CONCENTRIC KNOCKOUTS BACK
& BOTTOM OF SUBBASE (ELECTRICAL ONLY)
58" CORD
SET 230V/208V UNIT*
18" CORD
SET 265V UNIT*
15°
40°
16-1/16"
HINGED
CONTROL
DOOR
OPTIONAL
SUBBASE
4"
13/16"
1 -3 /8"
11-3/8"
13/16"
1/2" O.D.
COPPER
DRAIN TUBE
2-3/4"
14
www.amana-ptac.com
MC-DPTAC
Framing for Accessory Wall Sleeve (WS9XX)
Alternative
Fastening Method
(Field Supplied)
Wood Screw
Toggle Bolt
Expansion
Anchor Bolt
Mounting
Holes
(Drilled by
Installer)
Plastic
Anchor
Screws
Wall Sleeve must extend a minimum of ¼” beyond outside wall to allow for
proper caulking.
JACK STUDS
HEADER - 4" x 4" OR
DOUBLE 2"x 4" ON EDGE
MAIN STUD
16 1/4"
MIN
42
1/4
"
ADJUST FRAMING TO
SECURE THIS DIMENSION
JACK STUD
CRIPPLE
FINISHED FLOOR
SUB-FLOOR
Wall sleeve opening height should be
squared with wall sleeve opening width.
H = 16¼"
W = 42¼"
Fastening Wall Sleeve
When installed in an opening, the Wall Sleeve must be horizontally level (side-to-side) and pitched ¼ bubble to the outside.
(NOTE: To ensure unit’s maximum efficiency, DO NOT over- or under-pitch.)
Installation Notes
1. If Sub-base (PTSB***E) is installed, allow minimum 3¼” height clearance and maximum 5” height clearance between wall sleeve and floor; allow minimum
2¾” protrusion from a finished wall. See Note 4 if using hydronic units.
2. Drain Kit (DK900D) shipped separately. Can be mounted either right side, left side or bottom of sleeve. If mounted to bottom of sleeve, allow 2” height
clearance from floor to bottom of sleeve.
3. For UL approval, 265V units must use Amana® brand Sub-base (PTSB***E) or Amana® brand Hard Wire Kit (PTPWHWK4). Overcurrent protection on 265V
units must be by cartridge-style time delay fuses, which are included and factory-installed on the Amana® brand 265V chassis.
4. If Hydronic Kit (HWK03 or HVK03) is installed, Wall Sleeve must extend exactly 3" into the room from the finished interior wall. If using the Amana® brand
Sub-base (PTSB***E), only the minimum 3¼” height clearance between wall sleeve and floor is permissible. Unit must also be operated with a remotemounted thermostat.
5. If Duct Kit (MDK02B) is installed, allow a minimum of 2⅜” into the room from the finished interior wall.
MC-DPTAC
www.amana-ptac.com
15
Packaged Terminal Air Conditioners
and Heat Pumps
with
Control Board
7-Button Control Pad
• One-Touch Activation
• Total Fan Control
• Easy-to-Read Display
Assembeled in the USA for 30 years:
Units are 100% run-tested and tripletested for leakage.
First YearWarranty: Parts & Labor
Second through Fifth Year: Parts & Labor on certain sealed system components
Second through Fifth Year: on certain functional parts only
* Complete warranty details available at w
­ ww.amana-ptac.com.
Amana® is a trademark of Maytag Corporation or its related companies and used under license to Goodman Company, L.P. All rights reserved. Our continuing commitment to quality products may mean a change in specifications without notice. © 2010 • Goodman Company, L.P. • Houston, Texas • Printed in the USA.
16
www.amana-ptac.com
MC-DPTAC