arium® pro Ultrapure Water Systems
Application-Orientated and Flexible to Meet the Highest Demands
Water Purification in Laboratories
Modular – selection of
five systems specially for
your application
Flexible – perfect fit
to every laboratory
environment
Easy to use – glass touch
display with intuitive menu
navigation
arium® pro ultrapure water systems
Description
The arium® pro series offers a flexible and
modular system which, compared to conventional devices, demonstrates excellent cost
efficiency.
All systems meet and exceed the ASTM Type 1
water quality standards and ensure the best
reproducible results in their class. Up to 120 l
of consistently high-quality ultrapure water
with a conductivity of 0.055 µS/cm (0 18.2
MO + cm) can be dispensed each hour.
The ultrapure water is virtually microorganism-free when a Sartopore® 2 150 end filter is
used.
The patented Sartorius technology, SD card
slot, long service life, and low maintenance
requirement distinguish the arium® pro systems as easy-to-use, efficient and reliable
Type 1 ultrapure water systems.
Applications
– HPLC, GC-MS
– Biological applications e.g. Cell Culture
– Standard Applications such as preparation
of solutions, media and reagents
Modular
The selection of five systems contains module
components specially tailored to your application. arium® pro supplies the desired level
of ultrapure water quality for any critical and
standard applications.
Flexible
The space-saving installation of the device
on, under, or above your workstation
integrates it perfectly into any laboratory.
The display-dispense unit can be flexible
positioned.
Display with touch-function
Even the opening of the dispensing valve
can be controlled by the unique display.
Simply navigate intuitively in the easy-touse and clear menu navigation by lightly
touching the display – even with gloves.
Technical Specifications
UV Lamp (185|254 nm)
Sanitization port
Conductivity measurement
(inlet water)
Ultrafilter
Pump
Cartridge 1
Cartridge 2
Inlet water
input
Conductivity measurement
(product water)
Reject water
outlet
Final filter
0.2 µm
Product water
Flow chart arium® pro VF TOC
Technical Specifications
Dimensions:
35.0 + 49.2 + 45,1 cm
Width + height + depth
Empty weight
17 – 19 kg, depending
on system type
Operating weight
27 – 29 kg, depending
on system type
Power supply
100 – 240 VAC
(± 10%); 50 – 60 Hz,
130 VA (max.)
Operating
temperature
2 °C – 35 °C at max.
80% rel. humidity
Storage
temperature
5 °C – 45 °C at max.
80% rel. humidity
SD card slot2,
RS-232 interface
Data output
Feed Water Quality
Water purified by reverse osmosis,
distillation or Deionisation.1
Input pressure
0 – 6.9 bar, recomm. > 2 bar
Temperature
2 – 30 °C
Specific
conductivity
< 100 μS/cm compensated
to 25 °C
TOC content
< 50 ppb
Turbidity
< 1 NTU
pH value
4 – 10
1
To operate arium® pro with non-treated drinking
water the Universal Kit could be used in most cases.
In order to verify the specifications of your feed
water, please contact the Sartorius Application
Support.
2
Not applicable for arium® pro
arium® pro DI and arium® pro
11:4301.01.12
0.055 µS/cm c
Menu
Care
Standard Applications
– AAS, ICP-MS
– Ion chromatography
– Preparation of reagents
– Photometry
Description
The arium® pro DI is a highly efficient water
treatment system and the ultrapure water
quality exceeds the ASTM Type 1 quality
standard.
Water is purified by a three-stage process.
In the first two stages, both organic and
inorganic components are removed reliably
from the feed water by using the specially
developed Elemental Kit cartridges. The
third purification stage is performed using
a Sartopore® final filter, which is connected
directly at the point of use and removes
particles and bacteria.
The arium® pro offers an even more
affordable alternative. Reduced to the
essential features, it produces ultrapure
water – without any compromises.
Product water quality
Water purification Adsorption by
methods
spherical activated
carbon, deionization,
optional final particle
and sterile filtration
Type of water
ASTM Type 1
ultrapure water
Output
120 l/h
Water dispensing
flow rate
0.1 – 2 l/ min. adjustable
Volume controlled 2 l/min in 100 ml, 1 l or
output4
5 l steps, depending on
total dispense between
0,1 l and 60 l
Volume accuracy5
3 % in the range of
0.25 l and 60 l
Conductivity1
0.055 µS/cm
compensated to 25 °C
Resistivity1
18.2 MO + cm
compensated to 25 °C
TOC content3
≤ 5 ppb
Microorganism
content2
< 1 CFU/1,000 ml
Particle content2
< 1/ml
arium® pro DI and pro systems for producing ASTM Type 1 ultrapure water
Equipment supplied: 1 arium® pro and Connection Set
Order Number
Description
H2Opro-DI-T
arium® pro DI Bench-Top system in a compact design
for every laboratory workstation
H2Opro-DI-B
arium® pro DI space saving Wall-Mounted system
with integrated wall bracket
H2Opro-DI-D
arium® pro DI Built-In system, space saving in every laboratory cabinet,
with integrated wall bracket for display-dispense unit
H2Obasic-T
arium® pro Bench-Top system in a compact design
for every laboratory workstation
H2Obasic-B
arium® pro space saving Wall-Mounted system with integrated wall bracket
1
Measured value output is adjustable to 25 °C compensated or non-compensated
When using a Sartopore® 2 150 end filter
Feed water < 50 ppb TOC content
4
At 2 bar pressure, depending on the connected accessories and end filter
5
Under constant operating conditions
2
3
arium® pro UV
11:4301.01.12
0.055 µS/cm c
1.0 ppb TOC
MenuCare
Description
Like arium® pro DI, the arium® pro UV features
three-stage purification technology. Yet it
additionally uses photooxidation to remove
organic components.
With two different wavelengths, the horizontally positioned UV lamp (185 | 254 mm) prevents microbial growth and reliably reduces
organic compounds to a TOC value of ≤ 2 ppb.
Perfectly matched to support photooxidation
technology, the Analytical Kit cartridges
optimize water purification and specifically
remove inorganic and organic substances.
Chemical-Analytical Applications
– HPLC
– GC-MS, AAS, ICP-MS
– Ion chromatography
– TOC-Analysis
– Photometry
The current TOC values are continuously
measured by the optionally integrated TOC
monitor and shown on the display.
Product water quality
Water purification Adsorption by spherical
methods
activated carbon, deionization, UV-irradiation,
optional final particle
and sterile filtration
Type of water
ASTM Type 1
ultrapure water
Output
120 l/h
Water dispensing
flow rate
0.1 – 2 l/ min. adjustable
Volume controlled 2 l/min in 100 ml, 1 l or
output4
5 l steps, depending on
total dispense between
0,1 l and 60 l
Volume accuracy5
3 % in the range of
0.25 l and 60 l
Conductivity1
0.055 µS/cm
compensated to 25 °C
Resistivity1
18.2 MO + cm
compensated to 25 °C
TOC content3
≤ 2 ppb
Microorganism
content2
< 1 CFU/1.000 ml
Particle content2
< 1/ml
arium® pro UV systems for producing ASTM Type 1 ultrapure water
Equipment supplied: 1 arium® pro with UV Lamp (185 | 254 nm) and Connection Set
Order Number
Description
H2Opro-UV-T
arium® pro UV Bench-Top system in a compact design
for every laboratory workstation, incl. UV Lamp
H2Opro-UV-B
arium® pro UV space saving Wall-Mounted system
with integrated wall bracket and incl. UV Lamp
H2Opro-UV-D
arium® pro UV Built-In system, space saving in every laboratory cabinet,
with integrated wall bracket for display-dispense unit and incl. UV Lamp
H2Opro-UV-T-TOC arium® pro UV Bench-Top system in a compact design for every laboratory
workstation, incl. UV Lamp and TOC Monitor
H2Opro-UV-B-TOC arium® pro UV space saving Wall-Mounted system
with integrated wall bracket, incl. UV Lamp and TOC Monitor
H2Opro-UV-D-TOC arium® pro UV Built-In system, space saving in every laboratory cabinet,
with integrated wall bracket for display-dispense unit, incl. UV Lamp and
TOC Monitor
1
Measured value output is adjustable to 25 °C compensated or non-compensated
When using a Sartopore® 2 150 end filter
3
Feed water < 50 ppb TOC content
4
At 2 bar pressure, depending on the connected accessories and end filter
5
Under constant operating conditions
2
arium® pro UF
11:4301.01.12
0.055 µS/cm c
Menu
Care
Biological Applications
– AAS, ICP-MS
– Ion chromatography
– Electrophoresis
– Endotoxin-Analysis
– Immunocytochemistry
– Nutrient media for cell culture
– Production of monoclonal antibodies
– Photometry
Description
In addition to featuring highly efficient purification components, such as active carbon
and highly effective ion exchange resin, the
arium® pro UF ultrapure water system additionally includes a hollow-fiber ultrafilter.
This ultrafilter uses crossflow technology to
reliably remove endotoxins, microorganisms
and particles, as well as DNases and RNases
from ultrapure water. As a result, this filter
makes the arium® pro UF ideal for use in
cell cultivation, electrophoresis, and many
other related applications.
Supported by the top-down flow technology
incorporated into Biological Kit cartridges,
the system produces ASTM Type 1 ultrapure
water of the highest quality.
Product water quality
Water purification Adsorption by spherical
methods
activated carbon, deionization, ultrafiltration,
optional final particle
and sterile filtration
Type of water
ASTM Type 1
ultrapure water
Output
120 l/h
Water dispensing
flow rate
0.1 – 1.7 l/min. adjustable
Volume controlled 1.7 l/min in 100 ml, 1 l or
output4
5 l steps, depending on
total dispense between
0,1 l and 60 l
Volume accuracy5
3 % in the range of
0.25 l and 60 l
Conductivity1
0.055 µS/cm compensated to 25 °C
Resistivity1
18.2 MO + cm
compensated to 25 °C
TOC content3
< 5 ppb
Microorganism
content2
< 1 CFU/1,000 ml
Particle content2
< 1/ml
Endotoxin
< 0.001 EU/ml
RNase content
< 0.004 ng/ml
DNase content
< 0.024 pg/µl
arium® pro UF systems for producing ASTM Type 1 ultrapure water
Equipment supplied: 1 arium® pro with Ultrafilter and Connection Set
Order Number
Description
H2Opro-UF-T
arium® pro UF Bench-Top system in a compact design
for every laboratory workstation, incl. Ultrafilter
H2Opro-UF-B
arium® pro UF space saving Wall-Mounted system
with integrated wall bracket and incl. Ultrafilter
H2Opro-UF-D
arium® pro UF Built-In system, space saving in every laboratory cabinet,
with integrated wall bracket for display-dispense unit and incl. Ultrafilter
1
Measured value output is adjustable to 25 °C compensated or non-compensated
When using a Sartopore® 2 150 end filter
3
Feed water < 50 ppb TOC content
4
At 2 bar pressure, depending on the connected accessories and end filter
5
Under constant operating conditions
2
arium® pro VF
15:3201.01.12
0.055 µS/cm c
1.0 ppb TOC
MenuCare
Chemical-Analytical, Biological,
and Standard Applications
– HPLC, GC-MS, AAS, ICP-MS, IC
– PCR
– Electrophoresis
– Endotoxin-Analysis
– Immunocytochemistry
– Nutrient media for cell culture
– Production of monoclonal antibodies
– Photometry
Description
This high-end unit delivers ultrapure water
of the highest quality and combines the
purification technology of the arium® pro UF
and pro UV units all into one system.
The integrated, horizontal UV lamp (185 | 254 mm), together with a hollow-fiber ultrafilter, not only prevents microbial growth
and reduces the TOC content to a minimum
of ≤ 2 ppb, but also additionally removes
endotoxins, microorganisms and particles,
as well as DNases and RNases. As a result, it
is the perfect solution for a large number of
critical applications in the laboratory.
Current TOC values are continuously
measured with the highest accuracy by
the optionally integrated TOC monitor
and displayed on the screen.
Product water quality
Water purification Adsorption by spherical
methods
activated carbon, deionization, ultrafiltration,
UV irradiation, optional
final particle and sterile
filtration
Type of water
ASTM Type 1
ultrapure water
Output
120 l/h
Water dispensing
flow rate
0.1 – 1.7 l/min. adjustable
Volume controlled 1.7 l/min in 100 ml, 1 l or
output4
5 l steps, depending on
total dispense between
0,1 l and 60 l
Volume accuracy5
3 % in the range of
0.25 l and 60 l
Conductivity1
0.055 µS/cm
compensated to 25 °C
Resistivity1
18.2 MO + cm
compensated to 25 °C
TOC content3
≤ 2 ppb
Microorganism
content2
< 1 CFU/1,000 ml
Particle content2
< 1/ml
Endotoxin
< 0.001 EU/ml
RNase content
< 0.004 ng/ml
DNase content
< 0.024 pg/µl
arium® pro VF systems for producing ASTM Type 1 ultrapure water
Equipment supplied: 1 arium® pro with UV lamp (185 | 254 nm), Ultrafilter and Connection Set
Order Number
Description
H2Opro-VF-T
arium® pro VF Bench-Top system in a compact design
for every laboratory workstation, incl. UV Lamp and Ultrafilter
H2Opro-VF-B
arium® pro VF space saving Wall-Mounted system
with integrated wall bracket, incl. UV Lamp and Ultrafilter
H2Opro-VF-D
arium® pro VF Built-In system, space saving in every laboratory cabinet,
with integrated wall bracket for display-dispense unit, incl. UV Lamp and
Ultrafilter
H2Opro-VF-T-TOC
arium® pro VF Bench-Top system in a compact design for every
laboratory workstation, incl. UV Lamp, Ultrafilter and TOC Monitor
H2Opro-VF-B-TOC
arium® pro VF space saving Wall-Mounted system with integrated
wall bracket, incl. UV Lamp, Ultrafilter and TOC Monitor
H2Opro-VF-D-TOC arium® pro VF Built-In system, space saving in every laboratory cabinet,
with integrated wall bracket for display-dispense unit, incl. UV Lamp,
Ultrafilter and TOC Monitor
1
Measured value output is adjustable to 25 °C compensated or non-compensated
When using a Sartopore® 2 150 end filter
3
Feed water < 50 ppb TOC content
4
At 2 bar pressure, depending on the connected accessories and end filter
5
Under constant operating conditions
2
Accessories
arium® Dispense Gun
Ergonomic Water Dispensing with an up to 3.7 m Working Radius
Description
The arium® dispense gun is an ergonomic,
easy-to-handle dispensing unit that is
excellently suited for dispensing ultrapure
water.
Depending on the working environment, you
can save space by mounting the dispense gun
on the wall or on a stand that is heightadjustable up to 70 cm.
– Extended working area of 3.7 m
– Available with a height-adjustable
stand or wall mounting bracket
– Ergonomic design
– Easy-to-use
– Sterile-grade filters connectable
Technical Specifications
Materials
Stand
Aluminum
(gray anodized)
Dispense gun
Plastic, white finish
Tubing
PVDF
Dimensions without tubing [W + H + D]
Dispense gun with stand 18.5 + 59.5 + 51.0 cm
Moreover, the stand lets you work in a
relaxed position and allows optimal adjustment to different sized sampling vessels.
Thanks to the extended tubing, the work
area has an expanded radius to up to 2.5 m
away from the arium® unit and another
1.2 m to the stand.
Dispense gun with wall 9.0 + 10.0 + 28.5 cm
mounting bracket
It is also easy to install a sterile-grade
filter (Sartopore® 2 150 capsule) with
0.2 μm pore size for guaranteed sterile
and particulate-free water dispensing.
Intended Use
arium® comfort I and comfort II
arium® pro DI, pro UF, pro UV and pro VF
arium® 611
Weight without tubing
Dispense gun with stand 5.60 kg
Dispense gun with wall 0.46 kg
mounting bracket
Order Number
Description
H2Opro-AMDG1
arium® Dispense Gun inclusive height-adjustable Stand, qty. 1 unit
H2Opro-AMDG2
arium® Dispense Gun inclusive wall mounting kit, qty. 1 unit
arium® Multifunction Stand
All Menu Functions Directly at the Dispensing Port
Description
The multifunction stand not only extends the
working radius up to 2.5 meter from arium®
ultrapure water system, but at the same time
enables the control of the unit and monitors
the ultrapure water quality directly at the
dispensing port. The bracket is integrated in
the stand to which the flexible arium® display
is mounted. This creates a combination that
provides complete access to the menu with
all its functions along with the practical
convenience of a dispense gun.
– Visual quality control directly at the
water-dispensing port
– System control directly at the work
place
– Optimal customization to the variously
sized sampling vessels
– Water dispensing using the slider
– Radius extends up to 2.5 meters
– Sterile-grade filters connectable
Moreover, the over 70 cm height-adjustable
stand lets you work in a relaxed position
one-handedly and allows optimal adjustment
to different sized sampling vessels.
Technical Specifications
Materials
Stand
Aluminum
(gray anodized)
Dimensions
[W + H + D]
22.0 + 59.5 + 25.5 cm
Weight
5.60 kg
Intended use for arium® built-in units
(D-version):
arium® comfort I and comfort II
arium® pro DI, pro UF, pro UV and pro VF
It is also easy to install a sterile-grade (filter
Sartopore® 2 150 capsule) with 0.2 μm pore
size for guaranteed sterile and particulatefree water dispensing.
Order Number
Description
H2Opro-ADM1
arium® Multifunction Stand, height-adjustable, including displaymounting kit, for arium® Built-In systems. qty. 1 unit
arium® Water Guard
Early Detection of Leakages Protects the Laboratory
Description
Only the early detection of water leakages
provides optimal protection against water
damage in the laboratory. Leakages are registered by the highly sensitive optical sensor.
– Highly sensitive optical sensor
– Audiovisual alarm signals
– Automatic water-stop in case of leakage
– High-grade material, non-corrosive
– Easy to install
– Integrated wall mounting bracket for
magnetic valve
In contrast to conventional sensors, this sensor functions independently of conductivity
measurement values as these are so low in the
ultrapure water area that the activation of
the guard is not guaranteed. Once a leakage is
detected the water guard automatically locks
the feed water inlet line. An acoustic warning
is triggered immediately and the system
status can be constantly controlled using the
integrated LED display. The sensitive, optical
sensors and high-grade materials mean
that the arium® water guard is perfect for
all ultrapure and pure water systems.
Technical Specifications
Sensor Dimensions
Diameter
5 cm
Height
2.5 cm
Cable length
2m
Tubing Connections
Input
a“ plug connection
Output
a“ plug connection
Power supply
100 – 240 VAC 50 – 60 Hz
Intended Use
System type:
arium® comfort I and comfort II
arium® pro, pro DI, pro UF, pro UV and pro VF
arium® advance RO and EDI
arium® 611, 612 and 613
Order Number
Description
610AWG1
arium® Water Guard, qty. 1 unit
arium® Foot Switch
More Convenient Pure Water Dispensing
Description
Easy-to-connect foot switch for starting
and stopping the water dispensing.
The rugged foot switch frees up both hands
for other tasks, such as changing vessels, and
minimizes the risk of contamination in the
cleanroom.
Technical Specifications
Material
Dimensions
[W + H + D]
Cable length
Power supply
Connector
Nylon, glass fiber
reinforced
14.0 + 4.5 (max.) + 10.6 cm
2m
100 – 240 VAC
50 – 60 Hz
Phoenix plug, 2-pin
Intended Use
arium® comfort I and comfort II
arium® pro DI, pro UF, pro UV and pro VF
– Water dispensing at a press of the foot
– Ideally suited for clean rooms,
minimize the risk of contamination
– Comfortable fatigue-free switching
thanks to low height
Order Number
Description
H2O-AFS1
arium® Foot Switch, qty. 1 unit
arium® Level Sensor
Practically Separate Tank Filling
Description
The level sensor makes it easy to connect an
external water storage tank and subsequently
fill a tank with ultrapure water.
Technical Specifications
Length Level Sensor
Diameter Connection
Bore
Cable length
88 mm
2.03 cm (max.)
1.65 cm
3m
Intended Use
arium® pro DI, pro UF, pro UV and pro VF
– Flexible water transport to anywhere
– Can fill every tank system
Order Number
Description
H2O-ALS1
arium® Level Sensor, qty. 1 unit
arium® Printer
GMP Data Logging Make Easy
Description
Current measurements can be output to
the printer via an RS-232 interface to support
qualification and documentation tasks.
Technical Specifications
Dimensions
[W + H + D]
21.5 + 7.8 + 15.5 cm
Intended Use
arium® comfort I and comfort II
arium® pro DI, pro UF, pro UV and pro VF
arium® 611, 612 and 613
– Acquisition and documentation
of current measurement data
Order Number
Description
611APR1
arium® Printer, qty. 1 unit
arium® pro Cartridge Sets
Pre-treatment and Post-treatment Cartridge Utilizing Top-Down Technology
Description
The cartridge sets are optimized for the
removal of both organic and inorganic
constituents. Every set has been designed
specifically to match the unit and delivers
ultrapure water that even exceeds the ASTM
type 1 quality standard. Such consistently
high water quality is a guarantee for optimal
reproducibility of your results.
Optimized cartridge materials such as highly
effective activated carbon coupled with a
highly efficient ion-exchange resin deliver
long lasting performance and thereby ensure
long maintenance intervals.
– High performance capacity thanks to
efficient ion-exchange resin
– Fast and effective absorption of impurities through high-grade activated carbon
– Optimized crossflow behavior, prevents
separation of the resin mixed-bed
– Patented connection process simplifies
the replacement of consumables
The Top-Down-Flow technology produces
ideal purification kinetics and prevents any
mixing of cleaning media. The cartridge was
designed with the applicable standards for
flow rate in the cross section and contact
time with the medium in mind.
Technical Specifications
Materials
Housing
high-grade
polypropylene
Mounting screws
stainless steel
Cleaning media
spherical catalytic
effective activated
carbon
ultrapure, mixed bed
ion exchange resin
Feed water
requirements
see “Technical
specifications” page 2
Exchange capacity at 18.2 MO + cm
ultrapure water related to CaCO3
Analytical Kit
Biological Kit
Elemental Kit
Universal Kit
[Grain]
965
1,141
1,268
965
[Equivalent]
1.25
1.48
1.64
1.25
Intended Use
H2O-A-PACK arium® pro VF and pro UV
H2O-B-PACK arium® pro UF
H2O-E-PACK arium® pro and pro DI
H2O-U-PACK* arium® pro, pro DI, pro UF,
pro UVand pro VF
Order Number
Description
H2O-A-PACK
Analytical Kit, arium® pro Cartridge Set for biological, chemical-analytical and standard ultrapure water applications, qty. 1 unit
H2O-B-PACK
Biological Kit, arium® pro Cartridge Set for biological ultrapure water
applications, qty. 1 unit
H2O-E-PACK
Elemental Kit, arium® pro Cartridge Set for standard ultrapure water
applications, qty. 1 unit
H2O-U-PACK*
Universal Kit, arium® pro Cartridge Set for non-treated drinking water*,
qty. 1 unit
*) To operate arium® pro with non-treated drinking water the Universal Kit could be used in most cases.
In order to verify the specifications of your feed water, please contact the Sartorius Application Support.
arium® Sterile-grade Filter
Sterile and Particle-free Water Dispensing
Description
The arium® sterile-grade filter (Sartopore® 2
150) is a sterile, ready-to-use membrane filter
capsule for the most
stringent requirements. Sartopore® 2 150
membrane filter capsules contain a hydro­
philic, heterogeneous polyethersulfone
double membrane. It enables an excellent
service life and output. The capsule is
attached, by a quick connector, at the final
position and reliably removes all particles.
A hydrophobic PTFE membrane at the farthest
point „upstream“ allows for easy and clean
venting of the capsule.
– Excellent service lifetime and flow rate
– Integrity tested
– Validated acc. to HIMA and ASTM F-838-05
– Meets WFI quality standards acc. to USP
incl. USP plastic class VI test
– Manufacture acc. to DIN ISO 9001
– Easy to install
– Automatic venting
– Certified quality
All pleated Sartopore® 2 membrane filter
units are validated as sterile filters for biopharmaceutical applications according to
the HIMA and ASTM F-838-05 guidelines
(documentation available). During the
manufacturing process, every unit is tested
for integrity in order to meet the highest
quality standards and safety regulations.
Technical Specifications
Materials
Membranes
Asym.
Polyethersulfone
Filling bell
Polycarbonate
Other plastics
Polypropylene
Pore size
0.45 μm + 0.2 μm
Filtration area
0.015 m2
Input and output
1/4” plug connection
Sterilization
Autoclaving at 134°C,
(max. 3 cycles)
1 bar, 30 min.
Max. diffusion
1 ml/min @ 2.5 bar
Min. bubble point
3.2 bar
Intended Use
On Dispense Guns and Display-Dispense
Unit for system type:
arium® comfort I and comfort II
arium® pro, pro DI, pro UF, pro UV and pro VF
arium® 611
arium® bagtank Dispense Gun
arium® Dispense Gun
Order Number
Description
5441307H4--CE--B
arium® Sterile-grade Filter (Sartopore® 2 150 capsules), 0.2 µm pore size,
qty. 5 units
arium® UV Lamp (185 | 254 nm)
Ultrapure Water, Free of TOC
Description
The horizontally arranged UV lamp delivers
especially reliable results. Unlike vertical
units, the temperature gradient is less pronounced and does not affect the activity of
UV waves. The two different wavelengths reliably removes organic substances (TOC or
total organic carbon), effectively preventing
microbiological growth. Organic compounds
oxidize at 185 nm, whereas 254 nm prevents
microbiological growth.
Technical Specifications
Material
TOC-content product water* < 2 ppb
Intended Use
arium® comfort I and comfort II
arium® pro UV and pro VF
arium® 611 UV and VF
* Feed water < 50 ppb TOC content
– Horizontal installation,
optimize temperature gradient
– Effectively destroys organic compounds
– Reduces microbiological growth
– Easy replacement
quartz glass
Order Number
Description
611CEL1
arium® UV Lamp (185 | 254 nm), qty. 1 unit
arium® Ultrafilter
Ultrapure Water, Free of Endotoxines, DNases and RNases
Description
The hollow-fiber ultrafilter utilizes crossflow
technology to reliably remove bacterial
endotoxins, microorganisms and particulates,
as well as DNases and RNases from the
ultrapure water.
The filters have been developed and manufactured according to DIN EN ISO 9001 |
DIN EN 46 001 certified quality assurance
system that meets the requirements of the
FDA’s Quality System Regulation 21 CFR
Part 820. During the manufacturing process,
every unit is integrity tested to meet the
highest quality standards and safety regulations.
Technical Specifications
Materials
Membrane
polysulfone
Composites
polyurethane (PUR)
Housings, Caps
polycarbonate (PC)
Plugs
polypropylene (PP)
Effective membrane
area
2.1 m2
Max. pressure
3 bar at room
temperature
Sanitization
200 ppm sodium
hypochlorite, 45 min,
max. 1+/week
Filling volume
– High flow rates
– Integrity tested
– Long service lives
– Certified quality
Lumen
152 ml
Filtrate area
306 ml
Retention of bacteria and endotoxins
Brev. diminuta
LRV 7-10
E. coli O55:B5
Endotoxin
LRV > 3.5
Natural Endotoxins
LRV > 3.0
Dimensions fibers
Inner diameter
215 μm
Wall thickness
50 μm
Molecular Weight
Cut Off (MWCO)
5.000 ( = 5 kD)
Intended Use
arium® pro VF and pro UF
arium® 611 VF and UF
Order Number
Description
611CDU5
arium® Ultrafilter, qty. 1 unit
arium® Biofilm Cleaning Syringes
Effective Removal of Microorganisms for a Long Lifetime
Description
With this cleaning agent, the regular removal
of the biofilms that develop during water
purification is easy and effective. Biofilms
especially develop on the concentrate side of
ultrafilters. If biofilms are removed regularly,
higher flow rates and longer lifetimes result.
This highly effective solution is prefilled in
50 ml syringes and directly ready for use.
It does not form any trihalogenmethane,
chloramines, hydrochloric acid or chlorate.
The cleaning agent is non-caustic and
degrades into NaCl and water.
– Highly effective against biofilms
(consisting of bacteria, fungi etc.)
– Free of organic components (TOC)
– Tenside-free
– Gentle on the environment
and materials
Technical Specifications
Ingredients
– Sodium hypochlorite
– Hydrogen peroxide
– Sodium chloride
– Hypochlorous acid
Intended Use
arium® pro DI, pro UF, pro UV and pro VF
arium® 611
Order Number
Description
611CDS2
arium® Biofilm Cleaning Syringes, prefilled in
50 ml syringes, qty. 2 units
611CDS6
arium® Biofilm Cleaning Syringes, prefilled in
50 ml syringes, qty. 6 units
Sales and Service Contacts
For further contacts, visit www.sartorius.com
America
Germany
Sartorius Weighing Technology GmbH
Weender Landstrasse 94–108
37075 Goettingen
Netherlands
Sartorius Netherlands B.V.
Edisonbaan 24
3439 MN Nieuwegein
USA
Sartorius Corporation
5 Orville Drive, Suite 200
Bohemia, NY 11716
Phone +49.551.308.0
Fax +49.551.308.3289
Phone +31.30.6053001
Fax +31.30.6052917
Phone +1.631.254.4249
Toll-free +1.800.635.2906
Fax +1.631.254.4253
www.sartorius.com
France & Suisse Romande
Sartorius France S.A.S.
ZI Les Paluds
Avenue de Jouques – CS 31090
13781 Aubagne Cedex
Phone +33.442.845600
Fax +33.442.846545
Austria
Sartorius Austria GmbH
Franzosengraben 12
1030 Vienna
Phone +43.1.7965760.0
Fax +43.1.7965760.24
Belgium
Sartorius Belgium N.V.
Leuvensesteenweg, 248/B
1800 Vilvoorde
Phone +32.2.756.06.71
Fax +32.2.253.45.95
Finland & Baltics
Sartorius Biohit Liquid Handling Oy
Laippatie 1
00880 Helsinki
Phone +358.9.755.951
Fax +358.9.755.95.292
Hungary
Sartorius Hungária Kft.
Kagyló u. 5.
2092 Budakeszi
Phone +3623.457.227
Fax +3623.457.147
Ireland
Sartorius Ireland Ltd.
Unit 41, The Business Centre
Stadium Business Park
Ballycoolin Road
Dublin 11
Phone +353.1.8089050
Fax +353.1.8089388
Poland
Sartorius Poland sp.z o.o.
ul. Wrzesinska 70
62-025 Kostrzyn
Phone +48.61.6473830
Fax +48.61.6473839
Russian Federation
LLC “Sartorius ICR” and
LLC “Sartorius RUS”
Uralskaya str. 4, Lit. B
199155, Saint-Petersburg
Argentina
Sartorius Argentina S.A.
Int. A. Ávalos 4251
B1605ECS Munro
Buenos Aires
Phone +54.11.4721.0505
Fax +54.11.4762.2333
Hong Kong
Sartorius Hong Kong Ltd.
Unit 1012, Lu Plaza
2 Wing Yip Street
Kwung Tong
Kowloon, Hong Kong
Phone +852.2774.2678
Fax +852.2766.3526
India
Sartorius Weighing India Pvt. Ltd.
#69/2-69/3, NH 48, Jakkasandra,
Nelamangala Tq
562 123 Bangalore, India
Phone +91.80.4350.5250
Fax +91.80.4350.5253
Brazil
Sartorius do Brasil Ltda
Av. Dom Pedro I, 241
Bairro Vila Pires
Santo André
São Paulo
Cep 09110-001
Japan
Sartorius Japan K.K.
4F Daiwa Shinagawa North Bldg.
8-11, Kita-Shinagawa 1-chome
Shinagawa-ku
Tokyo 140-0001
Phone +55.11.4451.6226
Fax +55.11.4451.4369
Phone +81.3.3740.5408
Fax +81.3.3740.5406
Phone +45.7023.4400
Fax +45.4630.4030
Canada
Sartorius Canada Inc.
2179 Dunwin Drive #4
Mississauga, ON L5L 1X2
Spain & Portugal
Sartorius Spain S.A.
Offices in Madrid:
C/ Isabel Colbrand, 10–12, of. 70
28050 Madrid
Phone +1.905.569.7977
Toll-Free +1.800.668.4234
Fax +1.905.569.7021
Malaysia
Sartorius Malaysia Sdn. Bhd
Lot L3-E-3B, Enterprise 4
Technology Park Malaysia
Bukit Jalil
57000 Kuala Lumpur, Malaysia
Phone +7.812.327.5.327
Fax +7.812.327.5.323
Scandinavia
Sartorius Nordic A/S
Hoerskaetten 6D
2630 Taastrup, Denmark
Phone Spain +34.902.123.367
Phone Portugal +351.800.855.800
Fax Spain +34.91.358.84.85
Fax Portugal +351.800.855.799
Switzerland
Sartorius Mechatronics Switzerland AG
Ringstrasse 24a
8317 Tagelswangen (ZH)
Phone +41.44.746.50.00
Fax +41.44.746.50.50
Mexico
Sartorius de México S.A. de C.V.
Circuito Circunvalación Poniente
No. 149
Ciudad Satélite
53100, Estado de México
México
Singapore
Sartorius Singapore Pte. Ltd
1 Science Park Road,
The Capricorn, #05-08A,
Singapore Science Park II
Singapore 117528
Phone +52.5555.62.1102
Fax +52.5555.62.2942
Phone +65.6872.3966
Fax +65.6778.2494
Asia|Pacific
U.K.
Sartorius UK Ltd.
Longmead Business Centre
Blenheim Road, Epsom
Surrey KT19 9QQ
Australia
Sartorius Australia Pty. Ltd.
Unit 5, 7-11 Rodeo Drive
Dandenong South Vic 3175
Phone +44.1372.737159
Fax +44.1372.729927
Phone +61.3.8762.1800
Fax +61.3.8762.1828
Italy
Sartorius Italy S.r.l.
Viale A. Casati, 4
20853 Muggiò (MB)
China
Sartorius Scientific
Instruments (Beijing) Co., Ltd.
33 Yu An Road, Airport Industrial Park
Zone B,
Shunyi District, Beijing 101300 ,
P.R.China
Phone +39.039.46591
Fax +39.039.465988
Phone +86.10.8042.6300
Fax +86.10.8042.6486
www.sartorius.com
Phone +60.3.8996.0622
Fax +60.3.8996.0755
South Korea
Sartorius Korea Ltd.
8th Floor, Solid Space B/D,
PanGyoYeok-Ro 220, BunDang-Gu
SeongNam-Si, GyeongGi-Do, 463-400
Phone +82.31.622.5700
Fax +82.31.622.5799
Thailand
Sartorius (Thailand) Co. Ltd.
129 Rama 9 Road,
Huaykwang
Bangkok 10310
Phone +66.2643.8361-6
Fax +66.2643.8367
Technical specifications subject to change without notice. Printed in Germany. Printed on bleached, chlorine-free paper. | W
Publication No.: SLG2051-e13012 · Order No.: 85032-542-58 · Ver. 01 | 2013
Europe