Daewoo SENCOR SVR-630 Service manual

S/M No. : TWP895BEF0R2
Service Manual
Colour Television
CHASSIS
WP-895
WP-895F
CP-885
CP-885F
CP-485F
✔ Caution
: In this Manual, some parts can be changed for improving, their
performance without notice in the parts list. So, if you need the
latest parts information,please refer to PPL(Parts Price List) in
Service Information Center (http://svc.dwe.co.kr).
DAEWOO ELECTRONICS CO., LTD
http : //svc.dwe.co.kr
Jun. 2002
Service manual WP-895/895F. CP885/885F. CP485F
Contents
1 - Main features ........................................................................................................................................................ 4
1-1 Specifications .................................................................................................................................................. 4
1-2 Channel table .................................................................................................................................................. 8
1-3 ATSS sorting method ....................................................................................................................................... 11
2 - Safety instruction ................................................................................................................................................. 13
3 - Alignment instructions ........................................................................................................................................
3-1 Microcontroller configuration : Service mode ...................................................................................................
3-2 Service mode navigation .................................................................................................................................
3-3 Microcontroller configuration : Option ..............................................................................................................
3-4 TV set Alignment .............................................................................................................................................
3-4-1 Local oscillator alignment ....................................................................................................................
3-4-2 G2 alignment .......................................................................................................................................
3-4-3 White balance .....................................................................................................................................
3-4-4 Focus ..................................................................................................................................................
3-4-5 Vertical geometry ................................................................................................................................
3-4-6 Horizontal picture centring ...................................................................................................................
3-4-7 East/West correction ...........................................................................................................................
3-4-8 AGC ....................................................................................................................................................
14
14
14
15
16
16
16
16
16
16
16
16
18
4 - IC description .......................................................................................................................................................
4-1 VCT383xA TV signal processor - Teletext decoder with embedded 8 bit Controller ............................................................................................................................................................
4-1-1 Block diagram off the VCT ...................................................................................................................
4-1-2 TV-signal Processor ...........................................................................................................................
4-1-2 -Controller ....................................................................................................... ...................................
4-1-4 Teletext Features ................................................................................................................................
4-1-5 Displaty OSD Features ......................................................................................................................
4-1-6 Audio Features ...................................................................................................................................
4-1-7 General Features ...............................................................................................................................
4-1-8 Data Capture .......................................................................................................................................
4-1-9 Data Capture Features ........................................................................................................................
4-1-10 TV processor version and -Controller capacity ..............................................................................
4-1-11 IC marking and version .......................................................................................................................
4-1-12 Pinning ................................................................................................................................................
4-2 MSP341x Multistandard Sound Processor ...................................................................................................
4-2-1 Basic Features of the MSP 341x .........................................................................................................
4-3 TDA4470 - Multistandard Video-IF and Quasi Parallel Sound Processor ......................................................
4-3-1 Description ..........................................................................................................................................
4-3-2 Features ..............................................................................................................................................
4-3-3 Pinning ................................................................................................................................................
4-3-4 Block diagram ....................................................................................................................................
4-4 TDA894xJ Stereo Audio Amplifier .................................................................................................................
4-4-1 Features ...............................................................................................................................................
4-5 TDA835xJ Vertical Amplifier ...........................................................................................................................
4-5-1 TDA8357J ...........................................................................................................................................
19
-1-
19
19
19
20
20
21
21
21
21
21
22
22
22
25
25
29
29
29
29
30
31
31
33
33
Service ma nual WP-895/895F. CP885/885F. CP485F
4-5-2 TDA8358J .............................................................................................................................................. 34
4-6 TDA6107Q .......................................................................................................................................................... 35
4-7 24C16 - 16 Kb EEPROM .................................................................................................................................... 38
4-8 STR - F6653 ....................................................................................................................................................... 39
4-8-1 General description ............................................................................................................................... 39
4-8-2 Features ................................................................................................................................................. 39
4-8-3 Block diagram ....................................................................................................................................... 39
4-8-4 Pin description ...................................................................................................................................... 40
4-8-5 Control part - electrical characteristics ................................................................................................. 40
4-8-6 MOSFET electrical characteristics ....................................................................................................... 41
5 - Circuit description .................................................................................................................................................. 42
5-1 Block diagram .................................................................................................................................................... 42
5-2 IF section ............................................................................................................................................................ 43
5-2-1 Block diagram ....................................................................................................................................... 43
5-2-2 Vision IF Amplifier .................................................................................................................................. 43
5-2-3 Tuner-and VIF-ACG ................................................................................................................................ 44
5-2-4 FPLL, VCO and AFC .............................................................................................................................. 44
5-2-5 Video Demodulation and Amplifier ...................................................................................................... 45
5-5-6 Sound IF Amplifier and SIF-AGC ....................................................................................................... 45
5-2-7 Quasi-Parallel-Sound (QPS) Mixer ......................................................................................................... 45
5-2-8 Standard Switch .................................................................................................................................... 45
5-2-9 L’ Switch .................................................................................................................................................. 45
5-2-10 Internal Voltage Stabiliser ..................................................................................................................... 45
5-3 Video - VCT description ...................................................................................................................................... 46
5-3-1 Introduction ............................................................................................................................................ 46
5-3-2 Video Front-end ..................................................................................................................................... 46
5-3-3 Input Selector ........................................................................................................................................ 46
5-3-4 Clamping ................................................................................................................................................ 46
5-3-5 Automatic Gain Control ........................................................................................................................ 46
5-3-6 Digitally Controlled Clock Oscillator ..................................................................................................... 46
5-3-7 Analogue Video Output ........................................................................................................................ 46
5-3-8 Adaptive Comb Filter (VCT3834A only) ................................................................................................ 47
5-3-9 Color Decoder ....................................................................................................................................... 47
5-3-10 Horizontal Scaler ................................................................................................................................... 47
5-3-11 Video Sync Processing ........................................................................................................................ 48
5-3-12 Display Processing ................................................................................................................................ 48
5-3-13 Chroma Transient Improvement ............................................................................................................ 48
5-3-14 Video Back-end ..................................................................................................................................... 48
5-3-15 CRT Measurement and Control ........................................................................................................... 49
5-3-16 Average Beam Current Limiter ............................................................................................................. 49
5-3-17 Analogue RGB Insertion ...................................................................................................................... 49
5-3-18 Fast-Blank Monitor ................................................................................................................................ 49
5-3-19 Vertical and East/West Deflection ....................................................................................................... 50
5-3-20 EHT Compensation ................................................................................................................................ 50
5-3-21 Reset Function ...................................................................................................................................... 50
5-3-22 Standby and Power-On ........................................................................................................................ 50
5-4 Micro-controller ...............................................................................................................
.......................................... 50
-2-
Service manual WP-895/895F. CP885/885F. CP485F
5-4-1 Introduction........................................................................................................................................... 50
5-4-2 CPU ...................................................................................................................................................... 50
5-4-3 -Controller I/O pin configuration and function ............................................................................... 51
5-4-4 Tuning .................................................................................................................................................. 51
5-4-5 Automatic Format switching and WSS ............................................................................................... 51
5-4-6 EXTERNAL source control logic
........................................................................................................... 52
5-4-7 Over Current Protection........................................................................................................................ 54
5-5Teletext Display ................................................................................................................................................. 54
5-6 Sound processing
............................................................................................................................................... 55
5-6-1 Analogue sound IF-input section
............................................................................................................ 55
5-6-2 Quadrature Mixers ................................................................................................................................ 55
5-6-3 Phase and AM discr imination........................................................................................................... 55
5-6-4 NICAM decoder.................................................................................................................................... 56
5-6-5 DSP section.......................................................................................................................................... 56
5-6-6 Sound Mode switching.......................................................................................................................... 56
5-7 Sound amplification........................................................................................................................................... 56
5-7-1 Power amplifier..................................................................................................................................... 56
5-7-2 Mode selection....................................................................................................................................... 57
5-8 Vertical deflection............................................................................................................................................. 57
5-8-1 Flyback voltage..................................................................................................................................... 57
5-8-2 Protection.............................................................................................................................................. 57
5-8-3 Guard circuit.......................................................................................................................................... 57
5-8-4 Damping resistor................................................................................................................................... 57
5-8-5 EAST-WEST Amplifier (TDA8358J only)............................................................................................... 57
5-9 Power supply (STR F6653)
.. .............................................................................................................................. 58
5-9-1 STR-F6654 gener
aral description......................................................................................................... 58
5-9-2 Power supply primary par t operations
................................................................................................... 58
5-10TV start-up, TV normal run and stand by mode operations
............................................................................... 62
5-10-1 TV start-up operations.......................................................................................................................... 62
5-10-2 TV normal run and stand-by mode operations
....................................................................................... 63
6 - Service parts list................................................................................................................................................... 68
7 - Exploded View ........................................................................................................................................................ 86
7-1 DWX-28W5 ....................................................................................................................................................... 86
7-2 DWF-28W8 ....................................................................................................................................................... 87
7-3 D T F-29U8 ....................................................................................................................................................... 88
7-4 D T P-28A7 ....................................................................................................................................................... 89
7-5 D T P-28B1 ....................................................................................................................................................... 90
7-6 D T P-28G7 ....................................................................................................................................................... 91
7-7 D T P-28G8 ....................................................................................................................................................... 92
7-8 DWF-28W9 ....................................................................................................................................................... 93
7-9 DTB-21U7
................................................................................................................................................... 94
8 - PCB Layout
9 - Circuit Diagram
-3-
Service manual WP 895/895F, CP885/885F, CP485F
1- Main Features
1-1 Specifications
TV standard
Sound system
Power consumption
Sound Output Power
Speaker
Teletext system
Aerial input
Channel coverage
Tuning system
Visual screen
Channel indication
Program Selection
Aux. terminal
Remote Control Unit
PAL - SECAM B/G D/K, PAL I/I, SECAM L/L’
NICAM B/G, I, D/K, L,
FM 2Carrier B/G, D/K
21” Real Falt : 59 W approx.
28” 4:3, FST : 69 W approx.
29" 4:3, REAL FALT : 74 W approx.
28” 16:9, WIDE : 69 W approx.
21” : 4.5W x 2 (at 1kHz, 60% mod, 10%THD)
28”, 29" : 7W x 2 (at 1kHz, 60% mod, 10%THD)
21” : 7W 8 ohm x2
28”, 29” : 12W 8 ohm x2
10 pages memory FASTEXT (FLOF or TOP)
75 ohm unbalanced
Off-air channels, S-cable channels and hyperband
frequency synthesiser tuning system
21” : 51 cm
28” : 66 cm
29” : 68 cm
On Screen Display
100 programmes
EURO-SCART 1 : Audio / Video In and Out, R/G/B In, Slow and
Fast switching.
EURO-SCART 2 : Audio / Video In and Out, SVHS In.
Monitor Out(option)
AV3 : Audio-Video Jack on front of cabinet.
Headphone jack (3.5 mm) on front of cabinet
SVHS3 (option) : Jack on front of cabinet - sound input common with AV3.
R-46G22
-4-
Service manual WP 895/895F, CP885/885F, CP485F
Specification matrix
CHASSIS NAME
VCT VERSION
WP-895 / CP-485F
3834
WP-895F
CP885
CP885F
3834
3832
3834
SOFTWARE VERSION
A
A
B
A
REMOTE CONTROL
R46G22
R46G22
R46G22
R46G22
PCB SERIAL NUMBER
4859805093
4859805193
4859805093
4859805193
TUBE
16:09
16:9 REAL FLAT
4:03
4:3 REAL FLAT
AUTO / 4:3 / 14:9 / ZOOM 14:9 /
ZOOM 16:9 / FULL SCREEN
AUTO / 4:3 / 14:9 / ZOOM 14:9 /
ZOOM 16:9 / FULL SCREEN
AUTO / FULL SCREEN / 14:9 /
16:9
AUTO / FULL SCREEN / 14:9 /
16:9 / WATERGLASS
3410
OFF / SPATIAL
3411
OFF / SPATIAL
/ PANORAMA /
VIRTUAL
DOLBY
3410
OFF / SPATIAL
3411
OFF / SPATIAL
/ PANORAMA /
VIRTUAL
DOLBY
3410
OFF / SPATIAL
3415
OFF / SPATIAL
3410
OFF / SPATIAL
3411
OFF / SPATIAL
/ PANORAMA /
VIRTUAL
DOLBY
DEDICATED
DEDICATED
DEDICATED
DEDICATED
DEDICATED
AV2 COMMON
DEDICATED
DEDICATED
SVHS3
"PICTURE IMPROVEMENTS, COMB FILTER,
HORIZONTAL SCALER"
TELETEXT SPLIT SCREEN
FORMATS AVAILABLE IN
VIDEO MODE
AV2 MONITOR OUTPUT
MSP VERSION (OPTION)
SOUND EFFECTS
GRAPHIC EQUALIZER
AV3 AUDIO INPUT
TELETEXT PAGE MEMORY
10 PAGE
10 PAGE
10 PAGE
10 PAGE
TOP TELETEXT
AVAILABLE : SELECTABLE IN FACTORY/SERVICE MODE BY OPTION BITS
FLOF TELETEXT
AVAILABLE : SELECTABLE IN FACTORY/SERVICE MODE BY OPTION BITS
TEXT CHARACTER
SUPPORT
"Pan-European Latin, Cyrillic, Greek"
OSD LANGUAGES
"English, French, German, Italian, Spanish, Dutch, Danish, Finnish, Norwegian, Swedish, Greek, Polish, Hungarian, Czech, Slovakian, Romanian, Russian."
"Philips, Alps, Partsnic"
TUNER OPTIONS
-5-
Service manual WP 895/895F, CP885/885F, CP485F
21 Pin EURO-SCART 1 :
Pin
1
2
3
4
5
6
7
8
Signal Description
Audio Output Right
Audio Input Right
Audio Output Left
Audio Earth
Blue Earth
Audio Input Left
Blue Input
Slow Switching
9
10
11
12
13
14
15
16
17
18
19
20
21
Green Earth
N.C.
Green Input
N.C.
Red Earth
Blanking Earth
Red Input
Fast Switching
Video Out Earth
Video In Earth
Video Output
Video Input
Common Earth
Matching value
0.5 Vrms, Impedance < 1 , ( RF 54% Mod )
0.5 Vrms, Impedance > 10
0.5 Vrms, Impedance < 1 , ( RF 54% Mod )
0.5 Vrms, Impedance > 10
0.7 Vpp ±0.1V, Impedance 75
TV : 0 to 2V, AV 16/9 : 4.5 to 7V, AV 4/3 : 9.5 to 12V ,
Impedance > 10
0.7 Vpp
0.1V, Impedance 75
0.7 Vpp 0.1V, Impedance 75
0 to 0.4V : Logic “0”, 1 to 3V : Logic “1”, Impedance 75
1 Vpp 3dB, Impedance 75
1 Vpp 3dB, Impedance 75
21 Pin EURO-SCART 2 :
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Signal Description
Audio Output Right
Audio Input Right
Audio Output Left
Audio Earth
Earth
Audio Input Left
N.C.
Slow Switching
N.C.
N.C.
N.C.
N.C.
Earth
Earth
Chroma Input
N.C.
Earth
Video In Earth
Matching value
0.5 Vrms, Impedance < 1 , ( RF 54% Mod ) - Not available for cp885
0.5 Vrms, Impedance > 10
0.5 Vrms, Impedance < 1 , ( RF 54% Mod ) - Not available for cp885
0.5 Vrms, Impedance > 10
TV: 0 to 2V, AV 16:9: 4.5V to 7V, AV 4:3: 9.5 to 12V
3dB for a luminance signal of 1 Vpp
-6-
Service manual WP 895/895F, CP885/885F, CP485F
19
20
21
Video Output
Video Input, Y In.
Common Earth
1 Vpp 3dB, Impedance 75 ( Monitor output ) - Not available for cp885
1 Vpp 3dB, Impedance 75
-7-
Service manual WP 895/895F, CP885/885F, CP485F
1-2 Channel table
FREQUENCY TABLE
CH
C01
C02
C03
C04
C05
C06
C07
C08
C09
C10
C11
C12
C13
C14
C15
C16
C17
C18
C19
C20
C21
C22
C23
C24
C25
C26
C27
C28
C29
C30
C31
C32
C33
C34
C35
C36
C37
C38
C39
C40
C41
EUROPE CCIR
46.25
48.25
55.25
62.25
175.25
182.25
189.25
196.25
203.25
210.25
217.25
224.25
53.75
82.25
183.75
192.25
201.25
471.25
479.25
487.25
495.25
503.25
511.25
519.25
527.25
535.25
543.25
551.25
559.25
567.25
575.25
583.25
591.25
599.25
607.25
615.25
623.25
631.25
FRANCE
55.75 (L’)
60.5 (L’)
63.75 (L’)
176.00
184.00
192.00
200.00
208.00
216.00
189.25 (LUX)
69.25 (L’)
76.25 (L’)
83.25 (L’)
90.25
97.25
471.25
479.25
487.25
495.25
503.25
511.25
519.25
527.25
535.25
543.25
551.25
559.25
567.25
575.25
583.25
591.25
599.25
607.25
615.25
623.25
631.25
GB(IRELAND)
47.75
53.75
61.75
175.25
183.25
191.25
199.25
207.25
215.25
223.25
231.25
239.25
247.25
49.75
57.75
65.75
77.75
85.75
471.25
479.25
487.25
495.25
503.25
511.25
519.25
527.25
535.25
543.25
551.25
559.25
567.25
575.25
583.25
591.25
599.25
607.25
615.25
623.25
631.25
-8-
EAST OIRT
49.75
59.25
77.25
85.25
93.25
175.25
183.25
191.25
199.25
207.25
215.25
223.25
471.25
479.25
487.25
495.25
503.25
511.25
519.25
527.25
535.25
543.25
551.25
559.25
567.25
575.25
583.25
591.25
599.25
607.25
615.25
623.25
631.25
Service manual WP 895/895F, CP885/885F, CP485F
CH
C42
C43
C44
C45
C46
C47
C48
C49
C50
C51
C52
C53
C54
C55
C56
C57
C58
C59
C60
C61
C62
C63
C64
C65
C66
C67
C68
C69
C70
C71
C72
C73
C74
C75
C76
C77
S01
S02
S03
S04
S05
S06
S07
S08
S09
EUROPE CCIR
639.25
647.25
655.25
663.25
671.25
679.25
687.25
695.25
703.25
711.25
719.25
727.25
735.25
743.25
751.25
759.25
767.25
775.25
783.25
791.25
799.25
807.25
815.25
823.25
831.25
839.25
847.25
855.25
863.25
69.25
76.25
83.25
90.25
97.25
59.25
93.25
105.25
112.25
119.25
126.25
133.25
140.25
147.25
154.25
161.25
FRANCE
639.25
647.25
655.25
663.25
671.25
679.25
687.25
695.25
703.25
711.25
719.25
727.25
735.25
743.25
751.25
759.25
767.25
775.25
783.25
791.25
799.25
807.25
815.25
823.25
831.25
839.25
847.25
855.25
863.25
104.75
116.75
128.75
140.75
152.75
164.75
176.75
188.75
200.75
GB(IRELAND)
639.25
647.25
655.25
663.25
671.25
679.25
687.25
695.25
703.25
711.25
719.25
727.25
735.25
743.25
751.25
759.25
767.25
775.25
783.25
791.25
799.25
807.25
815.25
823.25
831.25
839.25
847.25
855.25
863.25
103.25
111.25
119.25
127.25
135.25
143.25
151.25
159.25
167.25
-9-
EAST OIRT
639.25
647.25
655.25
663.25
671.25
679.25
687.25
695.25
703.25
711.25
719.25
727.25
735.25
743.25
751.25
759.25
767.25
775.25
783.25
791.25
799.25
807.25
815.25
823.25
831.25
839.25
847.25
855.25
863.25
105.25
112.25
119.25
126.25
133.25
140.25
147.25
154.25
161.25
Service manual WP 895/895F, CP885/885F, CP485F
CH
S10
S11
S12
S13
S14
S15
S16
S17
S18
S19
S20
S21
S22
S23
S24
S25
S26
S27
S28
S29
S30
S31
S32
S33
S34
S35
S36
S37
S38
S39
S40
S41
EUROPE CCIR
168.25
231.25
238.25
245.25
252.25
259.25
266.25
273.25
280.25
287.25
294.25
303.25
311.25
319.25
327.25
335.25
343.25
351.25
359.25
367.25
375.25
383.25
391.25
399.25
407.25
415.25
423.25
431.25
439.25
447.25
455.25
463.25
FRANCE
212.75
224.75
236.75
248.75
260.75
272.75
284.75
296.75
136.00
160.00
303.25
311.25
319.25
327.25
335.25
343.25
351.25
359.25
367.25
375.25
383.25
391.25
399.25
407.25
415.25
423.25
431.25
439.25
447.25
455.25
463.25
GB(IRELAND)
255.25
263.25
271.25
279.25
287.25
295.25
303.25
311.25
319.25
327.25
335.25
343.25
351.25
359.25
367.25
375.25
383.25
391.25
399.25
407.25
415.25
423.25
431.25
439.25
447.25
455.25
463.25
- 10 -
EAST OIRT
168.25
231.25
238.25
245.25
252.25
259.25
266.25
273.25
280.25
287.25
294.25
303.25
311.25
319.25
327.25
335.25
343.25
351.25
359.25
367.25
375.25
383.25
391.25
399.25
407.25
415.25
423.25
431.25
439.25
447.25
455.25
463.25
Service manual WP 895/895F, CP885/885F, CP485F
1-3 ATSS sorting method
The TV set sweeps all the TV bands from beginning of VHF to end of UHF. The TV controlling software for each
program checks if a VPS CNI code is transmitted ( this system exists for German, Swiss and Austrian transmissions).
If no VPS CNI code is found, then the system check if a CNI code is transmitted as part of the teletext transmission
( Packet 8/30 format 1 ). If such a code ( VPS or teletext ) is found and if this code is in the ATSS list, the program is
automatically named.
If the transmission does not have VPS CNI, and no teletext service is availab le, then there is no possibility of the
program being automatically named.
The programs found are then sorted in 4 groups :
Group I : It contains all the pro grams from the selected country and named by the TV controlling software. Within this
group the sorting order is fixed by the ATSS list.
Group II : It contains all the pro grams with a strong signal strength which are not listed in group I.
Group III : It contains all the pro grams with a weak signal strength which are not listed in group I.
Group IV : If two or more programs with the same code are found, only the strongest ( or if they have the same level
the one with the lowest frequency) is listed in group I, II or III. The others are listed in group IV.
Program
number
1
2
...
n
n+1
...
m
m+1
...
p
p+1
...
q
q+1
....
99
0
Group
Program
number
1
...
m
m+1
...
p
p+1
...
q
q+1
....
99
0
Skip
Group I
Group II
Group III
Group IV
not used
Group
Skip
Group II
Group III
Group IV
not used
Special case : Country selection = Others
Special case : France
Note : If two programs with the same name but a different code ar e found these two programs are listed in
group I, II or III ( e.g. Regional pro gram SW3 in Germany ).
- 11 -
Service manual WP 895/895F, CP885/885F, CP485F
The sor ting order within group II, III, and IV is based on the channel frequency. The Pro gram with the lo west
frequency is allocated the first rank in its group, and so f orth until the last program of the group which has the
highest fr equency.
Special case : France
If France is selected, the TV controlling softw are f irst swe e ps all TV bands with Fr ance system selected
( positi ve video modulation) and the a second time with Europe system selected ( nega tive video modulation).
Special case : Switzerland
If Switzerland is selected the TV controlling softw are f irst s wee ps all TV bands with Eur ope system selected
(ne ga tive video modulation) and then a second time with France system selected ( positive video modulation).
Special case : GB
Note for sa tellite recei ver users : Before starting ATSS tur n On your satellite r ecei ver and tune “ SKY NEWS ”.
If GB is selected the TV controlling software seeks for programs only in UHF ( C21 to C70 ).
The sorting order is :
1 - BBC1
2 - BBC2
3 - ITV
4 - CH4
5 - CH5
6 - NEWS
If two or more “ identical” pr ograms ( same name but different code e.g. BBC1 and BBC1 Scotland ) are found
the f ollowing pro grams in the list will be shifted up. (1 - BBC1, 2 - BBC1, 3 - BBC2, 4 -ITV, 5 - CH4, 6 - CH5,
7 - NEWS, ..)
If one of the progr am abo ve is not f ound, the associated program number remains empty
( freq.=467.25 Mhz - Skip selected - no name - system=GB).
example A : 1 - BBC1, 2 - BBC2, 3 - ITV , 4 - ----, 5 - CH5, 6 - NEW S , ...
example B ( if 2 BBC1 found ) : 1 - BBC1, 2 - BBC1, 3 - BBC2, 4 - IT V, 5 - -----, 6 - CH5, 7 -NEWS, ...
- 12 -
Service manual WP 895/895F, CP885/885F, CP485F
2 - Safety instruction
WARNING: Only competent service personnel may carry out work involving the testing or repair of this equipment.
X-RAY RADIATION PRECAUTION
1. Excessive high voltage can produce potentially hazardous X-RAY RADIATION. To avoid such hazards, the high
voltage must not exceed the specified limit. The nominal value of the high voltage of this receiver is
26 KV (21” - 29”) at max beam curr ent. The high voltage must not, under any circumstances,
exceed 29.5 KV (21" - 25") or 30 KV (28" - 29"). Each time a receiver requires servicing, the high voltage
should be checked. It is important to use an accurate and reliable high voltage meter.
2. The only source of X-RAY Radiation in this TV receiver is the picture tube. For continued X-RAY RADIATION
protection, the replacement tube must be exactly the same type tube as specified in the parts list.
SAFETY PRECAUTION
1. Potentials of high voltage are present when this receiver is operating. Operation of the receiver outside the cabinet
or with the back board removed involves a shock hazard from the receiver.
1) Servicing should not be attempted by anyone who is not thoroughly familiar with the precautions necessary
when working on high voltage equipment.
2) Discharge the high potential of the picture tube before handling the tube. The picture tube is highly evacuated
and if broken, glass fragments will be violently expelled.
2. If any Fuse in this TV receiver is blown, replace it with the FUSE specified in the Replacement Parts List.
3. When replacing a high wattage resistor ( metal oxide film resistor) in the circuit board, keep the resistor
10 mm away from circuit board.
4. Keep wires away from high voltage or high temperature components.
5. This receiver must operate under AC 220 ~ 240 volts, 5O Hz. NEVER connect to DC supply or any other power or
frequency.
PRODUCT SAFETY NOTICE
Many electrical and mechanical parts in this equipment have special safety-related characteristics.
These characteristics are often passed unnoticed by a visual inspection and the X-RAY RADIATION protection
afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage,
wattage, etc. Replacement parts which have these special safety characteristics are identified in this manual and its
supplements, electrical components having such features are identified by designated symbol on the parts list.
Before replacing any of these components, read the parts list in this manual carefully. The use of substitutes
replacement parts which do not have the same safety characteristics as specified in the parts list may create X-RAY
Radiation.
- 13 -
Service manual WP 895/895F, CP885/885F, CP485F
3 - Alignment instructions
3-1 Microcontroller con figuration : Service mode
To switch the TV set into service mode please see instruction below.
1 - Select pr. number 91
2 - Adjust sharpness to minimum and exit all menu.
3 - Quickly press the key sequence : RED - GREEN - menu
To software version is displayed beside the word Service, e.g. “ SERVICE V1.00A ”.
To exit SERVICE men u press men u key or Std By key.
3-2 Service mode navigation
Pr Up / D own remote keys
Vol- / + remote keys
0~7 digit keys
Order
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
: cycle through the service items availa ble.
: Decrement / Increment the values within range.
: Toggle bits 0~7 in option byte
Item
PARABOLA
HOR WIDTH
CORNER
HOR.PARAL
V.LINEAR
EW TRAPEZ
S CORRECT
H BOW
VERT SIZE
VERT CENT
RED GAIN
GRN GAIN
BLUE GAIN
RED BIAS
GRN BIAS
HOR CEN
AGC LEVEL
G2-SCREEN
AFT
OPTION
MAXV OL
Default settingh for wp 895
+140
-1100
-80
-1
-2
-12
-15
+100
+145
+3939
+92
+87
+95
+128
+128
98
Not used
- 14 -
Service manual WP 895/895F, CP885/885F, CP485F
3-3 Microcontroller configuration : Option bits
MICOM
VCT3834A C4 DWO2
VCT3832A C4 DW03
DW3834A-C4-AE2
DW3832A-C4-BE2
Bits in OPTION
NOT USED
USED
(set to ‘0’)
7, 6, 5, 2, 1,
4, 3
0
Bits in OPTION2
NOT USED
USED
(set to ‘0’)
OPTION2 does not exist
7, 6, 5, 4, 2,
1, 0
3, 2, 1, 0
3
COMMENTS
Up to, but not including
COB version 0.14
No tuner option 11
(ROM V1.00 A/B)
From V0.17 COB (ROM
V2.00 A/B)
7, 6, 5, 4
There are two option bytes available (16 bits in all). These option bits are available from Service
mode. First find the OPTION or OPTION2 control, and then use keys 0..7 on the remote keypad
to control bits 0 to 7 respectively. The table below shows the two option bytes available;
B7
B6
B5
1
TOP text
off
FASTEXT
FLOF off
TUBE 4:3
0
TOP text
on
FASTEXT
(FLOF) on
TUBE
16:9
B7
B6
B5
OPTION1
B4
AUTO 4:3
switch to
PANORAMA
Y
Y
B2
SVHS3
disable
X
AUTO 4:3
switch to 4:3
SVHS3
enable
OPTION2
B4
B3
B2
Normal I
brightness
Normal I
brightness
+5 steps
1
Y
B3
Y
0
OPTION2 bits B2 B1 B0
Beam Current (mA)
Nominal
Max
B2
B1
B0
1
1
1
0.95
1.10
1
1
0
1.00
1.15
1
0
1
1.05
1.20
1
0
0
1.10
1.25
0
1
1
1.20
1.44
0
1
0
1.25
1.49
0
0
1
1.30
1.53
0
0
0
0.90
1.05
Set all the unused bits, marked ‘X’, to be 0 for future compatibility.
Set all the unused bits, marked ‘Y’, to be 1 for future compatibility.
- 15 -
B1
B0
Tuner options
00 = Philips
01 = ALPS
10 = Philips(AGC
intern)
11 = Daewoo
B1
B0
See table below.
OPTION2 bits B2 B1 B0
Tube
28” 4:3 Normal (Philips, Thomson)
28” 16:9 Super Flat (Philips, Th omson)
28” 4:3 Normal (Tesla)
28” 16:9 Real Flat (Thomson)
29” 4:3 Real Flat (Thomson)
21” 4:3 Real Flat (Philips)
Service manual WP 895/895F, CP885/885F, CP485F
Entering Factory mode Option bits
To switch the TV set into FACTORY mode, use the factory remote control, and press on “SVC”. The factory menu
will appear on the screen, showing “FACTORY Vx.xxX” (where x.xx is the software version) and X is the project. A is
the correct project for WP895/895F, CP-485/885F, and B is for the CP885 chassis.
To find the option bits, push the button “OPT” once. Then “00000000 OPTION” will appear (assuming that all bits are
already zero) to indicate all 8 option bits. To find OPTION2 press the button “OPT” a second time. From left to right,
bits 7 to 0 are shown.
Toggling option bits
This is done from the user remote control, as there are no unallocated keys available from the factory remote control.
Each bit, from bit 7 to bit 0 is represented by its own key. Each key will, with repeated use, toggle on/off the
associated bit. See the table below for the keys to use.
Bit
User
remote
control key
B7
Text
HOLD
B6
Text
SubPage
Mode
B5
Text
Reveal
B4
Text
Double
Height
B3
B2
B1
B0
Red
Green
Yellow
Blue
After setting option bits
Before pushing on the shipping key, “AGC”, it is necessary to push the “NORMAL” key to obtain NORMAL I. This will
reset all the sound and brightness settings to a factory defined level, as well as some other settings such as sound
PRESET and WAKE TIME/PROG.
Then, on pushing the shipping key, these levels are memo rised in the television, ready for packing and delivery.
Verification
On pushing the shipping “AGC” key, a four digit hexadecimal number is displayed in addition to “SHIPPING”. This
number is there to verify the option bits setting that has been entered. For example the binary code 0000 0111
(OPTION2) 1100 0010 (OPTION) will give 07 C2 hex. The order of display is therefore OPTION2 then OPTION
when reading from left to right.
3-4 TV set Alignment
3-4-1- Local oscillator alignment
Tune a colour bar pattern. The frequency of the signal carrier must be accurate ( Max +/- 10Khz deviation from the
nominal channel frequency).
Find “AFT” item in service mode.
Adjust the coil L150 to bring the cursor to central position : 32.
3-4-2- G2 alignment
- Tune a colour bar pattern.
- Find the “G2 - SCREEN” item in service mode.
- Adjust screen volume ( on FBT ) to bring the cursor to central position : 32.
3-4-3- White balance
- Select a dark picture and adjust RED BIAS and GRN BIAS to the desired colour temperature.
- Select a bright picture and adjust RED, GRN and BLUE GAIN to the desired colour temperature.
3-4-4- Focus
Adjust the Focus volume ( on FBT ) to have the best resolution on screen.
3-4-5- Vertical geometry
Adjust V.LINEAR (linearity), S CORRECT
(S. Correction), VERT SIZE (Vertical
amplitude), VERT CENT (vertical centring)
to compensate for vertical distortion.
- 16-
Service manual WP 895/895F, CP885/885F, CP485F
3-4-6- Horizontal picture centring
Adjust HOR CEN(Horizontal center) to have the picture in the center of the screen.
3-4-7- Eau/West comection
Adjust the PARABOLA, HOR WIDTH, CORNER, HOR PARAL, EW TRAPEZ, H BOW, to compensate for
geometrical distorrin,
HOR PARAL
H BOW
HOR WIDTH
PARAROLA
- 17 -
For HOR WIDTH, adjust for 91% overscan.
Service manual WP 895/895F, CP885/885F, CP485F
CORNER
EW TRAPEZ
3-4-8- AGC
- Adjust the antenna signal level at 70 dB V 2
- Tune a colour bar pattern.
- Find the “AGC” item in service mode.
- Adjust AGC volume ( RB10 ) to bring the cursor to central position : 32.
- 18 -
Service manual WP 895/895F, CP885/885F, CP485F
4 - IC description
4-1 VCT383XA TV signal processor - Teletext decoder with embedded 8 bit - Controller.
4-1-1- Block diagram of the VCT
4-1-2- TV-signal Processor
• Four composite video inputs, two S-VHS inputs
• Analogue YC r C b input
• Composite video monitor
• Multistandard colour decoder ( 1 crystal )
• Multistandard sync decoder
• Black-line detector
• Adaptive 2H comb filter Y/C separator
- 19 -
Service manual WP 895/895F, CP885/885F, CP485F
• Horizontal scaling ( 0.25 to 4 )
• Panoramavision
• Black-level expander
• Dynamic peaking
• Soft limiter (gamma correction)
• Colour transient improvement
• Programmable RGB matrix
• Analogue RGB/Fastblank input
• Half-contrast switch
• Picture frame generator
• Scan velocity modulation output
• High-performance H/V deflection
• Angle and bow correction
• Separate ADC for tube measurements
• EHT compensation
4-1-3- -Controller
• 8-bit, 10-Mhz CPU (65C02)
• 96 kB program ROM on chip
• 1 kB program RAM on chip
• memory banking
• 16-input, 16-level interrupt controller
• patch module for 10 ROM locations
• two 16-bit reloadable timers
• capture compare module
• watchdog timer
• 14-bit PWM for voltage synthesis
• Four 8-bit PWMs
• 10-bit ADC with 15:1 input MUX
• I2C bus master interface
• 24 programmable I/O ports
• 80C51 -controller core standard instruction set and timing
• 1 s machine cycle
• 32-128Kx8-bit late programmed ROM
• 3-12Kx8-bit Auxiliary RAM (shared with Display and Acquisition)
• Interrupt controller for individual enable/disable with two level priority
• Two 16-bit Timer/Counter registers
• WatchDog timer
• Auxiliary RAM page pointer
• 16-bit Data pointer
• IDLE and Power Down (PD) mode
• 14 bits PWM for Voltage Synthesis Tuning
• 8-bit A/D converter
• 4 pins which can be programmed as general I/O pin, ADC input or PWM (6-bit) output
4-1-4- Teletext Features
• Four programmable video inputs
• Adaptive data slicer
• Signal quality detection
• WST, PDC, VPS, and WSS acquisition
- 20 -
Service manual WP 895/895F, CP885/885F, CP485F
• High-level command language
• FLOF (Fastext), and TOP support
• 10 pages memory on chip (10kB)
4-1-5- Display OSD Features
• 3kB OSD RAM on chip
• WST level 1.5 compliant
• WST level 2 parallel attributes
• 32 foreground/background colours
• programmable colour look-up table
• 1024 mask programmable characters
• 17 national languages
• (Latin, Cyrillic and Greek caracter sets)
• Character matrix 10x10
• 4-color mode for user font
4-1-6- Audio Features
• Three mono inputs
• Two mono outputs
• Programmable channel select
• Volume control for one mono channel
4-1-7- General Features
• Submicron CMOS technology
• Low-power standby mode
• Single 20.25 MHz crystal
• 64-pin PSDIP package
4-1-8- Data Capture
The Video Front End section takes in the analogue Composite Video and Blanking Signal (CVBS), and from this
extracts the required data, which is then decoded and stored in memory.
The extraction of the data is performed in the digital domain. The first stage is to select and convert the analogue
CVBS signal into a digital form. This is done using 8 bit ADC sampling at 20.25 Mhz.
The digital data services transmitted in the VBI are selected and acquired separately form the video part. This is done
by the use of an adaptive data slicer. The following data types can be extracted : 625 line World System Teletext
(WST), VPS, WSS. The data is acquired and decoded by the teletext decoder (TPU), then stored in an SRAM lnterface.
4-1-9- Data Capture Features
• Video Signal Quality detector
• Data Capture for 625 line WST
• Data Capture for VPS data (PDC system A)
• Data Capture for Wide Screen Signalling (WSS) bit decoding
• Real-time capture and decoding for WST Teletext in Hardware, to enable optimised microprocessor throughput
• 10 page memory stored On-Chip
- 21 -
Service manual WP 895/895F, CP885/885F, CP485F
• Inventory of transmitted Teletext pages stored in the Page Table
• Signal quality detector for WST data
• Comprehensive Teletext language coverage
• Full Field Vertical Blanking Interval (VBI) data capture of WST data
4-1-10- TV processor version and -Controller capacity
IC version
VCT 3832A
VCT 3834A
96k
1k
96k
1k
10 pages
X
10 pages
8 bit -controller
ROM size
RAM size
PAL decoder
SECAM decoder
NTSC decoder
Picture improvement
Teletext page memory
Adaptive Comb filter
Panorama Scaler
4-1-11- IC marking and version
Chassis
IC marking
CP885
VCT3832A
CP885F
VCT3834A
WP895F/CP485F
VCT3834A
VCT3834A
WP895
OSD languages
Text
ATSS countries
English, French,
German, Italian,
Spanish, Dutch,
Danish, Finnish,
Norwegian, Swedish,
Greek, Polish,
Hungarian, Czech,
Slovakian, Romanian,
Russian.
GB, France, Germany,
Italy, Belgium, Spain,
Austria, Poland,
Switzerland, Denmark,
Finland, Netherlands,
Norway, Sweden,
Ireland, Hungary,
Czech Republic, Others
Pan-European Latin.
Cyrillic, Greek.
4-1-12- Pinning
PSDIP
64-pin
1
2
3
4
5
6
7
8
9
10
11
12
13
Pin Name
Type
Short Description
Power
AGC
VSUPP1
GNDP1
MOD_SW
SECAM L/L’
AFC
IR
SC1.SW
SC2.SW
VOUT
VRT
SGND
OUT
IN
SUPPLY
SUPPLY
OUT
OUT
IN
IN
IN
IN
OUT
IN
IN
High = SMPS ON, Low = SMPS in stand by mode.
For service only, tuner AGC, TOP alignment.
Supply Voltage, Port ( pin 1, 2, 5, 6, 7, 8, 9, 10, 61, 62, 63, 64).
Ground, Port.
High = Negative modulation, Low = Positive modulation (L/L’).
High = L’, Low = L.
Analog Video Output
Reference Voltage Top, Video ADC
Signal Ground for Analog Input
- 22 -
Service manual WP 895/895F, CP885/885F, CP485F
PSDIP
64-pin
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
Pin Name
GNDAF
VSUPAF
CBIN
CIN1
CIN2/CRIN
VIN1
VIN2
VIN3
VIN4
TEST
HOUT
VSUPD
GNDD
FBLIN
RIN
GIN
BIN
VPROT
SAFETY
HFLB
VERTQ/ INTLC
VERT
EW
SENSE
GNDM
RSW1
RSW2
SVMOUT
ROUT
GOUT
BOUT
VSUPAB
GNDAB
VRD
XREF
AIN3
AIN2
AIN1
AOUT2
AOUT1
VSUPS
GNDS
XTAL1
XTAL2
RESQ
SCL
SDA
Mute
LED
KB
OCP
Type
SUPPLY
SUPPLY
IN
IN
IN
IN
IN
IN
IN
IN
OUT
SUPPLY
SUPPLY
IN
IN
IN
IN
IN
IN
IN
OUT
OUT
OUT
IN
SUPPLY
OUT
OUT
OUT
OUT
OUT
OUT
SUPPLY
SUPPLY
IN
IN
IN
IN
IN
OUT
OUT
SUPPLY
SUPPLY
IN
OUT
IN/OUT
IN/OUT
IN/OUT
OUT
OUT
IN
IN
Short Description
Ground, Analog Front-end
Supply Voltage, Analog Front-end
Analog Component Cb Input
Analog Chroma 1 Input
Analog Chroma 2 Input / Analog Component Cr Input
Analog Video 1 Input
Analog Video 2 Input
Analog Video 3 Input
Analog Video 4 Input
Test Pin, Reserved For Test
Horizontal Drive Output
Supply Voltage, Digital Circuitry
Ground, Digital Circuitry
Fast Blank Input
Analog Red Input
Analog Green Input
Analog Blue Input
Vertical Protection Input
Safety Input
Horizontal Flyback Input
Differential Vertical Sawtooth Output Interlace Control Output
Differential Vertical Sawtooth Output
Vertical Parabola Output
Sense ADC Input
Ground, MADC Input
Range Switch1 for Measurement ADC
Range Switch2 for Measurement ADC
Scan Velocity Modulation Output
Analog Red Output
Analog Green Output
Analog Blue Output
Supply Voltage, Analog Back-end
Ground, Analog Back-end
DAC Reference
Reference Input for RGB DACs
Analog Audio 3 Input
Analog Audio 2 Input
Analog Audio 1 Input
Analog Audio 2 Output
Analog Audio 1 Output
Supply Voltage, Standby
Ground, Standby
Analog Crystal Input
Analog Crystal Output
Reset Input/Output, Active Low
I 2 C Bus Clock
I 2 C Bus Data
High = Mute active
High = Green, Low = Red
Local keyboard ADC input
Over Current Protection input
- 23 -
Service manual WP 895/895F, CP885/885F, CP485F
Power
64
OCP
2
AGC
63
KB
3
S/B 5V
62
LED
4
Gnd
61
MUTE
5
MOD SW
60
SDA
6
SECAM L’
59
SCL
7
AFC/RES
58
RESET
8
IR
57
XTAL in
9
SC1 SW
56
OSC GND
10
SC2 SW
55
GND
11
Vout
54
S/B 3.3V
12
VRT
53
13
SGND
52
14
GND
51
GND
15
5V
50
GND
16
Cb in
49
GND
17
C in
48
XREF
18
Cr in
47
VRD
19
IF-IN
46
GND
20
SC1-IN
45
5V
21
SC2-IN
44
B out
22
RCA VIN
43
G out
23
TEST
42
R out
24
H out
41
SVM out
25
3.3 V
40
RSW2
26
GND
39
RSW1
27
FBLIN
38
GND
28
Rin
37
SENSE
29
Gin
36
EW
30
Bin
35
VERTQ
31
VPROT
34
VERT
32
SAFETY
33
HFLB
VCT 383X
1
- 24 -
Service manual WP 895/895F, CP885/885F, CP485F
4-2 MSP341x Multistandard Sound Processor
The MSP 341x is designed as a single-chip Multistandard Sound Processor for applications in analogue and digital TV
sets, video recorders, and PC cards.
The MSP3411 has all functions of MSP3410 with the addition of a virtual surround sound feature.
A Surround sound affect ccan be rproduced with two loudspeakers. The MSP3411 includes virtualizer
algorithm “3D Panorama” which has been approved by the Dolby laboratories for compliance with the “Virtual Dolby
Surround” technology. In addition, the MSP3411 includes Micronas “Panorama” algorithm.
MSP 341x features :
- sound IF input
- No external filters required
- Stereo baseband input via integrated AD converters
- Two pairs of DA converters
- Two carrier FM or NICAM processing
- AVC : Automatic Volume Correction
- Bass, treble, volume processing
- Full SCART in/out matrix without restrictions
- Improved FM-identification
- Demodulator short programming
- Autodetection for terrestrial TV - sound standards
- Precise bit-error rate indication
- Automatic switching from NICAM to FM/AM or vice versa
- Improved NICAM synchronisation algorithm
- Improved carrier mute algorithm
- Improved AM-demodulation
- Reduction of necessary controlling
- Less external components
4-2-1- Basic Features of the MSP 341x
4-2-1-1 Demodulator and NICAM Decoder Section
The MSP 341x is designed to simultaneously perform digital demodulation and decoding of NICAM-coded TV stereo
sound, as well as demodulation of FM or AM mono TV sound. Alternatively, two carrier FM systems according to the
German terrestrial specs can be processed with the MSP 341x.
The MSP 341x facilitates profitable multistandard capability, offering the following advantages:
- Automatic Gain Control (AGC) for analogue input: input range: 0.10 - 3 Vpp
- integrated A/D converter for sound-IF input
- all demodulation and filtering is performed on chip and is individually programmable
- easy realisation of all digital NICAM standards (B/G, I, L and D/K)
- FM-demodulation of all terrestrial standards (include identification decoding)
- no external filter hardware is required
- only one crystal clock (18.432 MHz) is necessary
- 25 -
Service manual WP 895/895F, CP885/885F, CP485F
- high deviation FM-mono mode (max. deviation: approx. ±360 kHz)
4-2-1-2 DSP-Section (Audio Baseband Processing)
- flexible selection of audio sources to be processed
- performance of terrestrial de-emphasise systems (FM, NICAM)
- digitally performed FM-identification decoding and de-matrixing
- digital baseband processing: volume, bass, treble
- simple controlling of volume, bass, treble
4-2-1-3 Analogue Section
- two selectable analogue pairs of audio baseband input (= two SCART inputs) input level: <2 V RMS,
input impedance: >25
- one selectable analogue mono input (i.e. AM sound): Not used in this chassis
- two high-quality A/D converters, S/N-Ratio: >85 dB
- 20 Hz to 20 kHz bandwidth for SCART-to-SCART copy facilities
- loudspeaker: one pair of four-fold oversampled D/A converters. Output level per channel:
max. 1.4 VRMS output resistance: max. 5 . S/N-ratio: >85 dB at maximum volume Max.
noise voltage in mute mode: < 10 V (BW: 20 Hz... 16kHz)
- one pair of four-fold oversampled D/A converters supplying a pair of SCART-outputs.
output level per channel: max. 2 V RMS, output resistance: max. 0.5 , S/N-Ratio: >85 dB (20 Hz... 16 kHz)
4-2-1-4 NICAM plus FM/AM-Mono
According to the British, Scandinavian, Spanish, and French TV-standards, high-quality stereo sound is transmitted
digitally. The systems allow two high-quality digital sound channels to be added to the already existing
FM/AM-channel. The sound coding follows the format of the so-called Near Instantaneous Companding System
(NICAM 728). Transmission is performed using Differential Quadrature Phase Shift Keying (DQPSK. Table below
offers an overview of the modulation parameters.)
In the case of NICAM/FM (AM) mode, there are three different audio channels available: NICAM A, NICAM B, and
FM/AM-mono. NICAM A and B may belong either to a stereo or to a dual language transmission. Information about
operation mode and about the quality of the NICAM signal can be read by the controlling software via the control bus.
In the case of low quality (high bit error rate), the controlling software may decide to switch to the analogue FM/AMmono sound. Alternatively, an automatic NICAM-FM/AM switching may be applied.
4-2-1-5 German 2-Carrier System (DUAL FM System)
Since September 1981, stereo and dual sound programs have been transmitted in Germany using the 2-carrier system.
Sound transmission consists of the already existing first sound carrier and a second sound carrier additionally
containing an identification signal. More details of this standard are given in Tables below. For D/K very similar
system is used.
- 26 -
Service manual WP 895/895F, CP885/885F, CP485F
TV standards
TV
system
B/G
B/G
Position of sound
carrier (MHz)
5.5 / 5.7421875
5.5 / 5.85
L
I
D/K
6.5 / 5.85
6.0 / 6.552
6.5 / 6.2578125 D/K1
6.5 / 6.7421875 D/K2
6.5 / 5.85 D/K-NICAM
Sound modulation
Color system
Country
FM Stereo
FM-Mono / NICAM
PAL
PAL
AM-Mono / NICAM
FM-Mono / NICAM
FM Stereo
SECAM-L
PAL
SECAM-East
Germany
Scandinavia,
Spain
France
UK
USSR
FM-Mono / NICAM
Architecture of MSP341x
Pin connections and short description
Pin No.
Pin Name
Type
1
TP
Out
2
NC
3
NC
4
TP
Out
5
TP
Out
6
ADR_SEL
In
7
STANDBYQ
In
8
NC
9
I2C_CL
In / Out
10
I2C_DA
In / Out
11
TP
In / Out
Short description
Test pin
Not Connected
Not Connected
Test pin
Test pin
I2C bus Address select
Standby ( Low-active)
Not Connected
I2C Clock
I2C data
Test pin
- 27 -
Hungary
Service manual WP 895/895F, CP885/885F, CP485F
Pin No.
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
Pin Name
TP
TP
NC
TP
TP
TP
DVSUP
DVSS
NC
NC
NC
NC
RESETQ
NC
NC
VREF2
DACM_R
DACM_L
NC
TP
NC
NC
NC
VREF1
SC1_OUT_R
SC1_OUT_L
NC
AHVSUP
CAPL_M
AHVSS
AGNDC
NC
NC
NC
NC
NC
ASG2
SC2_IN_L
SC2_IN_R
ASG1
SC1_IN_L
SC1_IN_R
VREFTOP
MONO_IN
AVSS
AVSUP
ANA_IN1+
Type
In / Out
Out
Out
Out
Out
In
Out
Out
Out
Out
Out
In
In
In
In
In
Short description
Test pin
Test pin
Not Connected
Test pin
Test pin
Test pin
Digital power supply +5V
Digital Ground
Not Connected
Not Connected
Not Connected
Not Connected
Power-On-reset
Not Connected
Not Connected
Reference ground 2 high voltage part
Loudspeaker out Right
Loudspeaker out Left
Not Connected
Test pin
Not Connected
Not Connected
Not Connected
Reference ground 1 high voltage part
Scart output 1, right
Scart output 1, left
Not Connected
Analog power supply 8.0V
Volume capacitor MAIN
Analog ground
Analog reference voltage high voltage part
Not Connected
Not Connected
Not Connected
Not Connected
Not Connected
Analog Shield Ground 2
Scart input 2 in, left
Scart input 2 in, right
Analog Shield Ground 1
Scart input 1 in, left
Scart input 1 in, right
Reference voltage IF A/D converter
Mono input
Analog ground
Analog power supply
In IF input 1
- 28 -
Service manual WP 895/895F, CP885/885F, CP485F
Pin No.
59
60
61
62
63
64
Pin Name
ANA_IN1NC
TESTEN
XTAL_IN
XTAL_OUT
NC
Type
In
In
In
Out
Short description
IF common
Not Connected
Test pin
Crystal oscillator
Crystal oscillator
Test pin
4-3 TDA 4470-Multistandard Video-IF and Quasi Parallel Sound Processor
4-3-1- Description
The TDA 4470 is an integrated bipolar circuit for multi-standard video/sound IF (VIF/SIF) signal processing in
TV/VCR and multimedia applications. The circuit processes all TV video IF signals with negative modulation
(e.g., B/G standard), positive modulation (e.g., L standard) and the AM, FM/NICAM sound IF signals.
4-3-2- Features
- 5V supply voltage ; low power consumption.
- Active carrier generation by FPLL principle (frequency-phase-locked-loop) for true synchronous demodulation.
- Very linear video demodulation, good pulse response and excellent intermodulation figures.
- Alignment-free AFC without external reference circuit, polarity of the AFC curve is switchable.
- VIF-AGC for negative modulated signals (peak sync. detection) and for positive modulation
(peak white/black level detector).
- Tuner AGC with adjustable take over point.
- Alignment-free quasi parallel sound (QPS) mixer for FM/NICAM sound IF signals.
- Intercarrier output signal is gain controlled (necessary for digital sound processing).
- Complete alignment-free AM demodulator with gain controlled AF output.
- Separate SIF-AGC with average detection
- Two independent SIF inputs
- Parallel operation of the AM demodulator and QPS mixer (for NICAM-L stereo sound).
4-3-3- Pinning
Pin
1,2
3
4,9,16
5
6,7
8
10
11
12
13
14
15
17
18
Symbol
Vi,SIF1
VSW
GND
VAGC
Vi,VIF
CAGC
RTOP
Itun
VO,VID
VSW
VSW
Cbl
Cref
LF
Function
SIF1 input ( symmetrical)
Input selector switch
Ground
SIF-AGC (time constant)
VIF input (symmetrical)
VIF-AGC (time constant)
Take Over Point, tuner AGC
Tuner AGC output current
Video output
Standard switch
L’switch
Black level capacitor
Internal reference voltage
Loop Filter
- 29 -
Service manual WP 895/895F, CP885/885F, CP485F
Pin
19
20, 21
22
23
24
25
26
27, 28
Symbol
VSW
VVCO
VAFC
VS
VO, FM
VO, AM
RCOMP
Vi,SIF2
Function
AFC switch
VCO circuit
AFC output
Supply voltage
Intercarrier output
AF output-AM sound
Offset compensation
SIF2 input (symmetrical)
4-3-4 Block diagram
Loop
filter
Offset
comp.
(optional)
26
18
l' switch
VCO
21
20
VCO
+
phase shift
FPLL
14
Control
19
AFC
6
VIF
AFC
switch
22
AFC
VIF amp
Video
7
CAGC
Video det.
8
15
Standard
switch
13
AGC
(VIF)
Standard
CBL
23
11
Tuner
10
Take over
point
SIF 2
Tuner
AGC
Supply
Cref
FM det.
27
24
28
SIF input
switch
V
17
Intercarrier
(FM/NICAM)
SIF amp
3
1
SIF 1
2
5
25
AGC
(SIF)
AM det.
CAGC
- 30 -
4,9,16
AF
(AM)
Service manual WP 895/895F, CP885/885F, CP485F
4-4 TDA894xJ Stereo Audio Amplifier
The TDA8944J( TDA 8946J) is a dual-channel audio po wer amplifier with an output power of 2 x 7W (2 X 15W)
at an 8 load and a 12V supply. The circuit contains two Bridges Tied Load(BTL) amplifiers with an all-NPN output
stage and standby/mute logic. The TDA8944J comes in a 17-pin DIL power package.
4-4-1- Features
- Few external components
- Fixed gain
- Standby and mute mode
- No on/off switching pop noise
- low standby current
- High supply voltage ripple rejection
- Outputs short-circuit protected to ground, supply and across the load
- Thermally protected
Pin description
Pin
1
Symbol
OUT1-
2
3
4
GND1
Vcc1
OUT1+
5
6
7
8
9
10
11
n.c.
IN1+
n.c.
IN1IN2MODE
SVR
12
IN2+
Description
negative loudspeaker
terminal 1
ground channel 1
supply voltage channel 1
positive loudspeaker
terminal 1
not connected
poitive input1
not connected
negative input1
negative input2
mode selection input
half supply voltage
decoupling (ripple rejection)
positive input2
- 31 -
Service manual WP 895/895F, CP885/885F, CP485F
Block diagram TDA8944J
- 32 -
Service manual WP 895/895F, CP885/885F, CP485F
4-5 TDA835xJ Vertical Amplifier
The TDA835xJ are power circuit for use in 90o and 110o colour deflection systems for field frequencies
of 25 to 200Hz and 16/9 picture tubes. The circuit provides a DC driven vertical deflection output circuit,
operating as a highly efficient class G system. Due to the full bridge output circuit the deflection coils can
be DC coupled.
The IC is constructed in a Low Voltage DMOS process that combines Bipolar, CMOS and DMOS devices.
MOS transistors are used in the output stage because of the absence of second breakdown.
4-5-1 TDA8357J
Features :
- Few external components
- High efficient fully DC-coupled vertical output bridge circuit
- Short rise and fall time of the vertical flyback switch
- Guard circuit
- Temperature (thermal) protection
- High EMC because of common mode inputs
Pinning
Pin
1
2
Symbol
Vi(pos)
Vi(neg)
3
4
5
6
7
8
9
Vp
VOB
GND
Vflb
VOA
VO(guard)
VM
Description
input voltage (positive)
input voltage
(negative)
supply voltage
output voltage B
ground
flyback supply voltage
output voltage A
guard output voltage
input measuring
resistor
- 33 -
Service manual WP 895/895F, CP885/885F, CP485F
4-5-2 TDA8358J
An East-West output stage is provided that is able to sink current
from the diode modulator circuit.
Features :
- Few external components
- Highly efficient fully DC-coupled vertical output bridge circuit
- Short rise and fall time of the vertical flyback switch
- Guard circuit
- Temperature (thermal) protection
- High EMC because of common mode inputs
- East-West output stage
- 34 -
Service manual WP 895/895F, CP885/885F, CP485F
- 35 -
Service manual WP 895/895F, CP885/885F, CP485F
4-6 TDA6107Q
The TDA6107Q includes three video output amplifiers in one plastic DIL-Bent-SIL 9-pin medium power package,
using high voltage DMOS technology, and is intended to drive the three cathodes of a colour CRT directly. To obtain
maximum performance, the amplifier should be used with black-current control.
Features
- Typical bandwidth of 5.5 MHz for an output signal of 60 Vpp
- High slew rate of 900V/ s
- No external components required
- Very simple application
- Single supply voltage of 200V
- Internal reference voltage of 2.5 V
- Fixed gain of 50.
- Black-current stabilisation (BCS) circuit
- Thermal protection
Pin description
Pin
1
2
3
4
5
Symbol
Vi(1)
Vi(2)
Vi(3)
GND
Iom
6
7
8
9
VDD
VOC(3)
VOC(2)
VOC(1)
Description
inverting input 1
inverting input 2
inverting input 3
ground (fin)
black current
measurement output
supply voltage
cathode output 3
cathode output 2
cathode output 1
- 36 -
Service manual WP 895/895F, CP885/885F, CP485F
Block diagram TDA6107Q
- 37 -
Service manual WP 895/895F, CP885/885F, CP485F
4-6 24C16 - 16 Kb EEPROM
features :
- 16 Kbit serial I2C bus EEPROM
- Single supply voltage : 4.5 V to 5.5 V
- 1 Million Erase/Write cycles (minimum)
- 40 year data retention (minimum)
Pin description
Pin No.
1, 2, 3
5
6
7
8
4
Name
E0, E1, E2
SDA
SCL
WC
Vcc
Vss
Description
Device address - not used
Serral Data/Address Input/Output
Serial clock
Write control
Supply voltage
Ground
The memory device is compatible with the I2C memory standard. This is a two wire serial interface that uses a
bi-directionnal data bus and serial clock. The memory carries a built-in 4-bit unique device type identifier code (1010)
in accordance with the I2C bus definition.
Serial Clock (SCL)
The SCL input is used to strobe all data in and out of the memory.
Serial Data (SDA)
The SDA pin is bi-directionnal, and is used to transfer data in or out of the memory
- 38 -
Service manual WP 895/895F, CP885/885F, CP485F
4-8 STR - F6654
4-8-1 General description
The STR-F6654 is an hybrid IC with a build-in MOSFET and control IC, designed for flyback converter type switch
mode power supply applications.
4-8-2 Features
- Small SIP fully isolated molded 5 pins package
- Many protection functions :
* Pulse-by-pulse overcurrent protection (OCP)
* Overvoltage protection with latch mode (OVP)
* Thermal protection with latch mode (TSD)
4-8-3 Block diagram
- 39 -
Service manual WP 895/895F, CP885/885F, CP485F
4-8-4 Pins description
pin
1
name
Overcurrent / feedback
symbol
O.C.P./ F.B.
2
3
4
5
Source
Drain
Supply
Ground
S
D
VIN
GND
description
Input of over current detection signal and
feedback signal
MOSFET source
MOSFET drain
Input of power supply for control circuit
Ground
4-8-5 Control part electrical characteristics
DESCRIPTION
Operation start voltage
Operation stop voltage
Circuit current in
operation
Circuit current in nonoperation
Maximum OFF time
Minimum time for input of
quaxi resonant signals
Minimum off time
O.C.P./F.B. terminal
threshold voltage 1
O.C.P./F.B. terminal
threshold voltage 2
O.C.P./F.B. terminal extraction
current
O.V.P. operation voltage
Latch circuit sustaining voltage
Latch circuit release voltage
Thermal shutdown operating
temperature
IC PIN
NUMBER
4-5
4-5
4-5
VIN (on)
VIN (off)
IIN (on)
MIN.
14.4
9
-
RATING
TYPE
16
10
-
MAX
17.6
11
30
4-5
IIN (off)
-
-
100
A
1-5
TOFF (max)
TTH (2)
45
-
-
55
1.0
SEC
SEC
1-5
TOFF (min)
VTH (1)
0.68
0.73
1.5
0.78
SEC
V
1-5
VTH (2)
1.3
1.45
1.6
V
1-2
IOCP/FB
1.2
1.35
1.5
mA
4-5
4-5
4-5
-
VIN (OVP)
IIN (H)
VIN (La.off)
TJ (TSD)
20.5
6.6
140
22.5
-
24.5
400
8.4
-
V
A
V
0
C
SYMBOL
- 40 -
UNIT
V
V
mA
Service manual WP 895/895F, CP885/885F, CP485F
4-8-6 MOSFET electrical characteristics
DESCRIPTION
Drain-to-source break
voltage
Drain leakage current
On-resistance
Switching time
Thermal resistance
IC PINS
NUMBER
3-2
3-2
3-2
3-2
-
SYMBOL
VDSS
IDSS
RDS (on)
tf
rH -F
- 41 -
MIN.
650
RATING
TYPE
-
MAX
-
-
-
300
1.15
250
0.95
UNIT
V
A
sec
C/W
0
Service manual WP 895/895F, CP885/885F, CP485F
5 - Circuit description
5-1 Block diagram
- 42 -
Service manual WP 895/895F, CP885/885F, CP485F
5-2 IF section
5-2-1 Block diagram
5-2-2 Vision IF Amplifier
The video IF signal (VIF) is fed through a SAW filter to the differential input (Pin 6-7) of the VIF amplifier.
This amplifier consists of three AC-coupled amplifier stages. Each differential amplifier is gain controlled by the
automatic gain control circuit (VIF-AGC). The output signal of the VIF amplifier is applied to the FPLL carrier
generation and the video demodulator.
- 43 -
Service manual WP 895/895F, CP885/885F, CP485F
SAW filters
Ref.
K3953M
Standard
B/G - D/K - I - L/L’
K9650M
B/G - D/K - I - L/L’
Features
- IF filter for video application
- TV IF filter with Nyquist slopes at 33.9 MHz and
38.9 MHz
- Constant group delay
- IF filter for audio application
- TV IF audio filter with two channels
- Channel 1 (L’ ) with one pass band for sound
carrier at 40.40 MHz
- Channel 2 ( L, D/K, I, B/G) with one pass band for
sound carriers between 32.40 MHz and 33.40 MHz
5-2-3 Tuner-and VIF-AGC
At Pin 8, the VIF-AGC charges/discharges the AGC capacitor to generate a control Voltage for setting the gain of the
VIF amplifier and tuner in order to keep the video output signal at a constant level. Therefore, in the case of all
negative modulated signals (e.g., B/G standard) the sync. level of the demodulated video signal is the criterion for a
fast charge/discharge of the AGC capacitor. For positive modulation (e.g., L standard) the peak white level of video
signal controls the charge current. In order to reduce reaction time for positive modulation, where a large time constant
is needed, an additional black level detector controls the discharge current in the event of decreasing VIF input signal.
The control voltage (AGC voltage at Pin 8) is transferred to an internal control signal, and is fed to the tuner AGC to
generate the tuner AGC current at Pin 11 (open collector output). The take over point of the tuner AGC can be adjusted
at Pin 10 by a potentiometer or an external dc voltage (from interface circuit or microprocessor).
5-2-4 FPLL, VCO and AFC
The FPLL circuit (frequency phase locked loop) consists of a frequency and phase detector to generate the control
voltage for the VCO tuning. In locked mode, the VCO is controlled by the phase detector and in unlocked mode,
the frequency detector is superimposed. The VCO operates with an external resonance circuit (L and C parallel) and is
controlled by internal varicaps. The VCO control voltage is also converted to a current and represents the AFC output
signal at Pin 22. At the AFC switch (Pin 19) three operating conditions of the AFC are possible:
AFC curve “rising” or “falling” and AFC “off”. A practicable VCO alignment of the external coil is the adjustment to
zero AFC output current at Pin 22. At center frequency the AFC output current is equal to zero. Furthermore, at Pin
14, the VCO center frequency can be switched for setting to the required L’ value (L’ standard). The optional
potentiometer at Pin 26 allows an offset compensation of the VCO phase for improved sound quality (fine adjustment).
Without a potentiometer (open circuit at Pin 26), this offset compensation is not active. The oscillator signal passes a
phase shifter and supplies the in-phase signal (0o) and the quadrature signal (90o) of the generated picture carrier.
- 44 -
Service manual WP 895/895F, CP885/885F, CP485F
5-2-5 Video Demodulation and Amplifier
The video IF signal, which is applied from the gain controlled IF amplifier, is multiplied with the in-phase component
of the VCO signal. The video demodulator is designed for low distortion and large bandwidth. The demodulator output
signal passes an integrated low pass filter for attenuation of the residual vision carrier and is fed to the video amplifier.
The video amplifier is realised by an operational amplifier with internal feedback and 8 MHz bandwidth (–3 dB). A
standard dependent dc level shift in this stage delivers the same sync. level for positive and negative modulation. An
additional noise clipping is provided. The video signal is fed to VIF-AGC and to the video output buffer. This amplifier
with a 6 dB gain offers easy adaptation of the sound trap. For nominal video IF modulation the video output signal at
Pin 12 is 2 Vpp.
5-2-6 Sound IF Amplifier and SIF-AGC
The SIF amplifier is nearly identical with the 3-stage VIF amplifier. Only the first amplifier stage exists twice and is
switchable by a control voltage at Pin 3. Therefore with minimal external expense it is possible to switch between two
different SAW filters. Both SIF inputs features excellent cross-talk attenuation and an input impedance which is
independent from the switching condition. The SIF-AGC is related to the average level of AM- or FM-carrier and
controls the SIF amplifier to provide a constant SIF signal to the AM demodulator and QPS mixer.
5-2-7 Quasi-Parallel-Sound (QPS) Mixer
The QPS mixer is realised by a multiplier. The SIF signal (FM or NICAM carrier) is converted to the intercarrier
frequency by the regenerated picture carrier (quadrature signal) which is provided from the VCO. The intercarrier
signal is fed via an output amplifier to Pin 24.
5-2-8 Standard Switch
To have equal polarity of the video output signal the polarity can be switched in the demodulation stage in accordance
with the TV standard. Additionally a standard dependent dc level shift in the video amplifier delivers the same sync. level.
In parallel to this, the correct VIF-AGC is selected for positive or negative modulated VIF signals. In the case of
negative modulation (e.g., B/G standard) the AM output signal is switched off. For positive modulation (L standard) the
AM demodulator and QPS mixer is active. This condition allows a parallel operation of the AM sound signal and the
NICAM-L stereo sound.
5-2-9 L’ Switch
With a control voltage at Pin 14 the VCO frequency can be switched for setting to the required L’ value (L’ standard).
Also a fine adjustment of the L’-VCO center frequency is possible via a potentiometer. The L’ switch is only active for
positive modulated video IF-signals (standard switch in L mode).
5-2-10 Internal Voltage Stabiliser
The internal bandgap reference ensures constant performance independent of supply voltage and temperature.
- 45 -
Service manual WP 895/895F, CP885/885F, CP485F
5-3 Video - VCT description
5-3-1 Introduction
The VCT 38xxA includes complete video, display, and deflection processing.
All processing is done digitally, the video front-end and video back-end are interfacing to the analogue world.
Most functions can be controlled by software via I 2 C bus slave interface.
5-3-2 Video Front-end
This block provides the analogue interfaces to all video inputs and mainly carries out analogue-to-digital conversion for
the following digital video processing. Most of the functional blocks in the front-end are digitally controlled (clamping,
AGC, and clock-DCO). The control loops are closed by the Fast Processor (‘FP’) embedded in the video decoder.
5-3-3 Input Selector
Up to seven analogue inputs can be connected. Four inputs are for input of composite video or S-VHS luma signal.
These inputs are clamped to the sync back porch and are amplified by a variable gain amplifier. Two chroma inputs can
be used for connection of S-VHS carrier-chrominance signal. These inputs are internally biased and have a fixed gain
amplifier.
5-3-4 Clamping
The composite video input signals are AC-coupled to the IC. The clamping voltage is stored on the coupling capacitors
and is generated by digitally controlled current sources. The clamping level is the back porch of the video signal.
S-VHS chrominance is also AC-coupled. The input pin is internally biased to the center of the ADC input range. Each
channel is sampled at 10.125 MHz with a resolution of 8 bit.
5-3-5 Automatic Gain Control
A digitally working automatic gain control adjusts the
magnitude of the selected baseband.
5-3-6 Digitally Controlled Clock Oscillator
The clock generation is also a part of the analogue front-end. The crystal oscillator is controlled digitally by the control
processor. The clock frequency can be adjusted within ±150 ppm. This adjustment is done in factory for every TV set.
5-3-7 Analogue Video Output
The input signal of the Luma ADC is available at the analogue video output pin (#11). The signal at this pin is buffered
by a source follower. The output voltage is 2 V. The magnitude is adjusted with an AGC in 8 steps together with the
main AGC.
- 46 -
Service manual WP 895/895F, CP885/885F, CP485F
5-3-8 Adaptive Comb Filter (VCT3834A only)
The adaptive comb filter is used for high-quality luminance/chrominance separation for PAL or NTSC signals. The
comb filter improves the luminance resolution (bandwidth) and reduces interferences like cross-luminance and
cross-color artefacts. The adaptive algorithm can eliminate most of the mentioned errors without introducing new
artefacts or noise. The filter uses two line delays to process the information of three adjacent video lines. To have a
fixed phase relationship of the colour subcarrier in the three channels, the system clock (20.25 MHz) is fractionally
locked to the colour subcarrier. This allows the processing of all colour standards and substandards using a single
crystal frequency. The CVBS signal in the three channels is filtered at the subcarrier frequency by a set of bandpass/
notch filters. The output of the three channels is used by the adaptation logic to select the weighting that is used to
reconstruct the luminance/chrominance signal from the 4 bandpass/notch filter signals. By using soft mixing of the 4
signals switching artefacts of the adaption algorithm are completely suppressed. The comb filter uses the middle line as
reference, therefore, the comb filter delay is one line. If the comb filter is switched off, the delay lines are used to pass
the luma/ chroma signals from the A/D converters to the luma/ chroma outputs. Thus, the comb filter delay is always
one line.
5-3-9 Color Decoder
In this block, the standard luma/chroma separation and multi-standard colour demodulation is carried out. The colour
demodulation uses an asynchronous clock, thus allowing a unified architecture for all colour standards.
The colour killer uses the burst-phase/ burst-frequency measurement to identify a PAL/NTSC or SECAM colour signal.
For PAL/NTSC, the colour is switched off (killed) as long as the colour subcarrier PLL is not locked. For SECAM, the
killer is controlled by the toggle of the burst frequency. The burst amplitude measurement is used to switch-off the
colour if the burst amplitude is below a programmable threshold. Thus, colour will be killed for very noisy signals.
The colour amplitude killer has a programmable hysteresis.
The burst-frequency measurement is also used for automatic standard recognition (together with the status of horizontal
and vertical locking) thus allowing a completely independent search of the line and colour standard of the input signal.
The following standards can be distinguished:
PAL B,G,H,I; NTSC M; SECAM; NTSC 44; PAL M; PAL N; PAL 60. In AV mode or when Prg No 0 is selected all the
standards above are enabled by the controlling software. In INSTALL menu the controlling software enables PAL B,G,
H,I and SECAM detection. The colour standard for each program number is stored in EEPROM. Outside INSTALL
menu and for programmes numbers 1 to 99, the auto colour detection is disabled, the colour standard is recall from
EEPROM and forced.
5-3-10 Horizontal Scaler (VCT3834A only)
The 4:2:2 YC r C b signal from the colour decoder is processed by the horizontal scaler. The scaler block allows a
linear or nonlinear horizontal scaling of the input video signal in the range of 0.25 to 4. Nonlinear scaling, also called
“Panoramavision”, provides a geometrical distortion of the input picture. It is used to fit a picture with 4:3 format on a
16:9 screen by stretching the picture geometry at the borders. Also, the inverse effect can be produced by the scaler.
The scaler contains a programmable decimation filter, a 1-line FIFO memory, and a programmable interpolation filter.
- 47 -
Service manual WP 895/895F, CP885/885F, CP485F
5-3-11 Video Sync Processing
To extract the sync information from the video signal, a linear phase low-pass filter eliminates all noise and video
contents above 1 MHz. The sync is separated by a slicer; the sync phase is measured. A variable window can be
selected to improve the noise immunity of the slicer. The phase comparator measures the falling edge of sync, as well
as the integrated sync pulse. The sync phase error is filtered by a phase-locked loop that is computed by the Fast
Processor. All timing in the front-end is derived from a counter that is part of this PLL, and it thus counts synchronously to the video signal. A separate hardware block measures the signal back porch and also allows gathering the
maximum/minimum of the video signal. This information is processed by the FP and used for gain control and
clamping. For vertical sync separation, the sliced video signal is integrated. The FP uses the integrator value to derive
vertical sync and field information. The information extracted by the video sync processing is multiplexed onto the
hardware front sync signal (FSY) and is distributed to the rest of the video processing system.
The data for the vertical deflection, the sawtooth, and the East-West correction signal is calculated by the VCT 38xxA.
5-3-12 Display Processing
In the display processing the conversion from digital YC r C b to analogue RGB is carried out.
In the luminance processing path, contrast and brightness adjustments and a variety of features, such as black-level
expansion, dynamic peaking and soft limiting, are provided. In the chrominance path, the C r C b signals are converted
to 4:4:4 format and filtered by a colour transient improvement circuit. The YC r C b signals are converted by a programmable matrix to RGB colour space. The digital OSD insertion circuit allows the insertion of a 5-bit OSD signal.
The OSD signals and the display clock are synchronised to the horizontal flyback.
5-3-13 Chroma Transient Improvement
The intention of this block is to enhance the chroma resolution. A correction signal is calculated by differentiation of
the colour difference signals. The differentiation can be selected according to the signal bandwidth, e.g. for PAL/NTSC/
SECAM or digital component signals, respectively. The amplitude of the correction signal is adjustable. Small noise
amplitudes in the correction signal are suppressed by an adjustable coring circuit. To eliminate ‘wrong colours’, which
are caused by over and undershoots at the chroma transition, the sharpened chroma signals are limited to a proper value
automatically.
5-3-14 Video Back-end
The digital RGB signals are converted to analogue RGBs using three video digital-to-analogue converters (DAC) with
10-bit resolution. An analogue brightness value is provided by three additional DACs. The adjustment range is 40 % of
the full RGB range. Controlling the white-drive/analogue brightness and also the external contrast and brightness
adjustments is done via the Fast Processor, located in the front-end. Control of the cutoff DACs is done via I 2 C bus
registers. Finally cutoff and blanking values are added to the RGB signals. Cutoff (dark current) is provided by three 9bit DACs. The adjustment range is 60 % of full scale RGB range. The analogue RGB-outputs are current outputs with
current-sink characteristics. The maximum current drawn by the output stage is obtained with peak white RGB. An
external half contrast signal can be used to reduce the output current of the RGB outputs to 50% . Cutoff and whitedrive current measurement are carried out during the vertical blanking interval. They always use the small bandwidth
setting.
- 48 -
Service manual WP 895/895F, CP885/885F, CP485F
5-3-15 CRT Measurement and Control
The display processor is equipped with an 8-bit ADC for all measuring purposes. The ADC is connected to the
SENSE input pin. Cutoff and white-drive current measurement are carried out during the vertical blanking interval.
5-3-16 Average Beam Current Limiter
The average beam current limiter (BCL) uses the SENSE input for the beam current measurement. The BCL uses a
different filter to average the beam current during the active picture. The filter bandwidth is approx. 2 kHz. The beam
current limiter has an automatic offset adjustment that is active two lines before the first cutoff measurement line. The
beam current limiter function is located in the front-end. The data exchange between the front-end and the back-end is
done via a single-wire serial interface. The beam current limiter allows the setting of a thresh-old current. If the beam
current is above the threshold, the excess current is low-pass filtered and used to attenuate the RGB outputs by
adjusting the white-drive multipliers for the internal (digital) RGB signals, and the analogue contrast multipliers for the
analogue RGB inputs, respectively. The lower limit of the attenuator is programmable, thus a minimum contrast can
always be set. During the tube measurement, the ABL attenuation is switched off. After the white-drive measurement
line it takes 3 lines to switch back to BCL limited drives and brightness.
5-3-17 Analogue RGB Insertion
The VCT 38xxA allows insertion of external analogue RGB signals. The RGB signal is key-clamped and inserted into
the main RGB by the Fast-Blank switch. The external RGB input can be overlaid or underlaid to the digital picture.
The external RGB signals can be adjusted independently as regards DC level (brightness) and magnitude (contrast). All
signals for analogue RGB insertion (RIN, GIN, BIN, FBLIN) must be synchronised to the horizontal flyback, otherwise a horizontal jitter will be visible. The VCT 38xxA has no means for timing correction of the analogue RGB input
signals. RGB signals are not digitalised and therefore cannot be processed by the picture scaler.
5-3-18 Fast-Blank Monitor
The presence of external analog RGB sources can be detected by means of a Fast-Blank monitor. With a special
monitor logic it is possible to detect if there is an external RGB source active and if it is a full screen insertion or only
a box. The monitor logic is connected directly to the FBLIN pin. The controlling software uses this information to
disable all picture format using display scaler.
5-3-19 Vertical and East/West Deflection
The calculations of the vertical and East/West deflection waveforms is done by the internal Fast Processor (FP).
The algorithm uses a chain of accumulators to generate the required polynomial waveforms. To produce the deflection
waveforms, the accumulators are initialised at the beginning of each field. The initialisation values must be computed
by the TV control processor and ar e written to the front-end once.
- 49 -
Service manual WP 895/895F, CP885/885F, CP485F
5-3-20 EHT Compensation
The vertical waveform can be scaled according to the average beam current. This is used to compensate the effects of
electric high-tension changes due to beam current variations. EHT compensation for East/West deflection is done with
an offset corresponding to the average beam current.
5-3-21 Reset Function
Reset of all VDP functions is performed by the RESQ pin. When this pin becomes active, all internal registers and
counters are lost.
5-3-22 Standby and Power-On
The VDP does not have a standby mode. To disable all the analogue and digital video functions, it is necessary to
switch off the supplies for analogue front-end (VSUP AF ), analogue back-end (VSUP AB ) and digital circuitry
(VSUP D ).
5-4- Microcontroller
5-4-1 Introduction
The TV controller basically consists of the CPU, RAM, ROM, and a number of peripheral modules.
For instance:
– a memory banking module is included to allow access to more than 64 kB memory.
– a bootloader software is included to allow in-system-downloading of external code to Flash memory via the I 2 C
interface.
The TV controller runs the complete software necessary to control a TV set. The software includes control of the audio,
video, OSD, and text processors on chip, as well, as control of external devices like tuner or stereo decoder.
Communication between the TV controller and external devices is done either via I 2 C bus interface or via programmable port pins. The TV Controller is clocked with f OSC = f XTAL /2.
5-4-2 CPU
The CPU is fully compatible to WDC’s W65C02 micro-processor. The processor has 8-bit registers/accumulator, an 8bit data bus, and a 16-bit address bus.
- 50 -
Service manual WP 895/895F, CP885/885F, CP485F
5-4-3 - Controller I/O pin configuration and function
There exist different kinds of ports. The universal ports serve as digital I/O and have additional special input and output
functions. A subset of the universal ports serves as input for the analogue-to-digital converter.
- Controller I/O pin configuration and function table
1
2
Power
AGC
configuration
Stand by
TV ON
Push Pull Low
Push Pull High
High impedance
High impedance
5
Mod SW
High impedance
Push Pull
6
7
8
9
SECAM L’
AFC
IR
SC1 SW
High impedance
High impedance
High impedance
High impedance
Push Pull
High impedance
High impedance
High impedance
10
SC2 SW
High impedance
High impedance
61
62
63
Mute
LED
KB
Push Pull
Open Drain
High impedance
Push Pull
Open Drain
High impedance
64
OCP
High impedance
High impedance
pin
name
description
Switch OFF / ON SMPS
Tuner AGC level input –
For factory use only
High = Negative
modulation, Low = Positive
modulation (L/L’).
Low = L, High =L’
ADC input
Interrupt input
SCART 1 slow switching –
ADC input
SCART 2 slow switching –
ADC input
High = Mute active
Keyboard input – ADC
input
Over Current Protection –
Switch the set to Std by if < 2.
To reduce power consumption in stand by mode all ports not used are configured in high impedance mode.
5-4-4 Tuning
The AFC information is supplied by the demodulator IC, and becomes available on VCT pin 7 for controlling software.
The controlling software uses this information for tuner frequency tracking ( automatic following ). The AFC window
is typically between 50 KHz and 100 KHz.
The minimum frequency step of the tuner is 50 Khz.
This AFC function is disabled when a program is tuned using the direct frequency entry or after fine tuning adjustment.
Therefore it is recommended to tune channel with the TV search function ( manual or ATSS ) or using the direct
channel entry to enable the Automatic Frequency Control.
5-4-5 Automatic Format switching and WSS
When AUTO mode is selected by the user, the television will automatically select a mode for the user. The format
information is supplied by SCART pin 8 level when in AV mode or by WSS data. The signal contains codes as defined in
the WSS European Telecommunication Standard, ETS 300 294. Briefly, the signal is received at the beginning of line
- 51 -
Service manual WP 895/895F, CP885/885F, CP485F
23, in each frame. This is bi-phase encoded using a clock frequency of 5 MHz. In total, 14 data bits are available, in
4 groups. Group 1 contains the codes for the received format.
The mode chosen is defined by the following table. In effect the default mode is full screen.
The table below gives a summary of the FORMAT modes available (for WP895 and WP895F), and their given
properties.
Format
Name(OSD)
4:3
Zoom factor – TV with
16:9 CRT
Vertical
Horizontal
100%
75%
14:9
114%
87%
ZOOM 14:9
114%
100%
ZOOM 16:9
133%
100%
PANORAMA
100%
100%
Description
Picture is centred with
black bars at the left
and right hand side of
the display
Picture is centred with
black bars at the left
and right hand side of
the display
Picture is displayed
filling the full width of the
screen by incorporating
a small horizontal
geometrical error
(typically 8% linear)
Picture is displayed
filling the full screen
(width and height)
Picture is displayed
filling the full screen
(width and height)
5-4-6 EXTERNAL source control logic
- 52 -
Application
Standard 4/3 picture with
576 active lines
14:9 picture – letter box
format with 504 active
lines
14:9 picture – letter box
format with 504 active
lines
16:9 picture – letter box
format with 430 active
lines
Used to fit a picture with
4:3 format on a 16:9
screen by stretching the
picture geometry at the
borders.
Service manual WP 895/895F, CP885/885F, CP485F
The following schematic, illustrates the logic of control for the two SCART connectors.
The terms used in the schematic are described below ;
1. AUTO represents a situation where the television has self-selected its picture source. This could be when the
SCART SLOW SWITCHING pin has gone to a high state, and the AV 1 input is selected without the intervention
of the user.
2. FORCED represents the change of source which has been commanded by the user (using the EXTERNAL button).
The user always has priority, and can override the AUTO change of source by the television.
3. AV KEY represents the EXTERNAL button of the remote control, or on the television.
4. S/SW 1, or S/SW 2 represent the SLOW SWITCHING inputs of the first SCART (AV 1) or second SCART (AV
2), these each being pin number 8.
5. F/SW 1 represents the FAST SWITCHING input of the first SCART (AV 1), on pin number 16. The second
SCART, AV 2, input does not possess a FAST SWITCHING input.
The HIGH state of a slow switching input represents the request from the external source to be selected by the
television. Whether this is accepted or not depends on the position in the logic diagram. The general rule is that the user
always has priority, so the use of the AV KEY will always result in a defined logic path being followed.
Under certain circumstances, defined in the diagram, the change of state of a slow switching input will result in the
automatic change of source by the television. This change, such as the change from RF broadcast to the AV 1 input,
- 53 -
Service manual WP 895/895F, CP885/885F, CP485F
can always be overridden by the user after the event.
Each line on the diagram, with its associated text, represents the exact conditions under which the change of state will
occur. Sometimes this will be accompanied by another action which will be automatically performed by the television,
being to either ENABLE or DISABLE F/SW 1.
5-4-7 Over Current Protection
In case of overload, the SMPS secondary voltages will drop. The voltage on pin 64 of microcontroller drops below a
reference voltage (2.26V). The controlling software which continuously monitors this voltage will switch the set to
stand by mode. To power on the set again the user must switch it off using the main power switch. Appropriate hysteresis guaranrees a reliable operation.
5-5 Teletext Display
National character option bits C12, C13, C14 are transmitted in the page header of a given teletext page. The national
option bits are intended to change (or exchange) 13 characters within the G0 character set, according to the needs of
each national language. However, for Cyrillic and Greek languages, a major character set change (a change of character
mapping) needs to effected for correct display.
These codes represent, for a given broadcaster, the intended language that the teletext page should be displayed in. As
there are only 3 bits, there are only 8 codes available to cover all the possible language combinations. This means that
for a received code there are several possibilities meanings, and therefore several possibilities for display.
This is not as bad as it first seems, as we use the user-selected OSD language to identify the intention of the broadcaster.
For example, a user wishing to see Russian teletext should select Russian OSD language, otherwise he would not have
correct teletext display on the TV.
The table below allows the reader to understand the relationship between selected OSD language (which is under user
control), the teletext language display (selected by national option bits in transmission page header) and the language
mapping (either Latin or Greek/Cyrillic)
An example: For Greek teletext display, (if national option code 1 1 1 is received from the broadcaster), the user should
select the Greek OSD language. Even if English, French, German, Italian, Spanish, Dutch, Danish, Finnish, Norwegian
or Swedish OSD languages are selected, the teletext will be correctly displayed.
However, if Polish, Hungarian, Czech, Slovakian, Rumanian or Russian OSD are selected, Latin font mapping is
selected. The consequence will be incorrect teletext display, with NO GREEK CHARACTERS DISPLAYED. Romanian national font options will be selected.
- 54 -
Service manual WP 895/895F, CP885/885F, CP485F
OSD Language
C
12
English, French, 0
German, Italian, 0
Spanish, Dutch, 0
Danish, Finnish, 0
1
Norwegian,
Swedish, Greek 1
1
1
0
Polish,
0
Hungarian,
0
Czech,
0
Slovakian,
1
Rumanial
1
1
1
0
Russian
0
0
0
1
1
1
1
C
13
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
C
14
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Teletext Language
English
German
Swedish/Finnish
Italian
French
Spanish
Turkish
English
Polish
German
Hungarian
Lettish/Lithuanian
French
Serb/Croat/Slovenian
Czech/Slovak
Rumanian
English
German
Estonian
Lettish/Lithuanian
English
English
Czech/Slovak
Rumanian
ESC
Teletext Language
English
German
Swedish/Finnish
Italian
French
Spanish
Turkish
Greek
Polish
German
Hungarian
Lettish/Lithuanian
French
Serb/Croat/Slovenian
Czech/Slovak
Rumanian
Serbian/Montenegrin
German
Estonian
Lettish/Lithuanian
Russian/Bulgarian
Ukrainian
Czech/Slovak
Rumanian
Mapping
Latin
Latin
Latin
Latin
Latin
Latin
Latin
Greek/Cyrillic
Latin
Latin
Latin
Latin
Latin
Latin
Latin
LatinRussian
Greek/Cyrillic
Latin
Latin
Latin
Greek/Cyrillic
Greek/Cyrillic
Latin
Latin
5-6 Sound processing
5-6-1 Analogue sound IF - input section
The input pins ANA_IN1+ and ANA_IN- offer the possibility to connect sound IF sources to the MSP 341xD. The
analogue-to-digital conversion of the preselected sound IF signal is done by an A/D converter, whose output is used to
control an analogue automatic gain circuit (AGC), providing an optimal level for a wide range of input levels.
5-6-2 Quadrature Mixers
The digital input coming from the integrated A/D converter may contain audio information at a frequency range of
theoretically 0 to 9 MHz corresponding to the selected standards. By means of two programmable quadrature mixers,
two different audio sources ; for example, NICAM and FM-mono, may be shifted into baseband position.
5-6-3 Phase and AM discrimination
The filtered sound IF signals are demodulated by means of the phase and amplitude discriminator block. On the output,
the phase and amplitude is available for further processing.
AM signals are derived from the amplitude information, whereas the phase information serves for FM and NICAM
demodulation.
- 55 -
Service manual WP 895/895F, CP885/885F, CP485F
5-6-4 NICAM decoder
In case of NICAM - mode, the phase samples are decoded according the DQPSK - coding scheme. The output of this
block contains the original NICAM bitstream.
5-6-5 DSP section
All audio baseband functions are performed by digital signal processing (DSP). The DSP section controls the source
and output selection, and the signals processing.
5-6-6 Sound Mode switching
In case of NICAM transmission, the controlling software reads the bit error rate and the operation mode from the
NICAM Decoder. When the set is in “Auto detection” mode ( default mode after ATSS ) the controlling software sets
automatically the sound mode ( NICAM mono, NICAM Dual 1 or NICAM Dual 2 ) depending on the transmitted
mode.
In the case of 2 Carrier FM transmission, the controlling software read the transmission mode and the signal quality level
from the Stereo Detection Register. When the set is in “Auto detection” mode the controlling software automatically sets
the sound mode ( mono, Stereo, Dual 1, Dual 2 ) depending on the transmitted mode.
In “Auto detection” mode the controlling software evaluates the signal quality and automatically switches to the analogue
sound carrier 1, if the transmission quality is too poor. To avoid unwanted automatic switching the threshold levels
mono to stereo and stereo to mono are different.
In “forced mono “ mode ( Red OSD in status Display Window), the controlling software configures the MSP341xD to
demodula
te onl y the analogue (FM or AM) sound carrier 1, no matter the signal quality. The sound mode “ forced “ or “
Autodetect” is stored for each programme.
5-7 Sound amplification
The TDA8944J (TDA8946J) is a stereo BTL audio amplifier capable of delivering 2 x 7 W (2 x 15 W) output power to
an 8 W load at THD = 10%, using a 12 V power supply and an external heatsink. The voltage gain is fixed at 32dB.
With the three-level MODE input the device can be switched from ‘standby’ to ‘mute’ and to ‘operating’ mode.
The TDA 8944J outputs are protected by an internal thermal shutdown protection mechanism and short-circuit
protection.
5-7-1 Power amplifier
The power amplifier is a Bridge Tied Load (BTL) amplifier with an all-NPN output stage, capable of delivering a peak
output current of 1.5 A.
The BTL principle offers the following advantages :
- Lower peak value of the supply current.
- The ripple frequency on the supply voltage is twice the signal frequency.
- No DC-blocking capacitor
- Good low frequency performance
- 56 -
Service manual WP 895/895F, CP885/885F, CP485F
5-7-2 Mode selection
The TDA894xJ has several functional modes, which can be selected by applying the proper DC voltage to pin MODE.
Mute : In this mode the amplifier is DC biased but not operational (no audio output). This allows the input coupling
capacitors to be charged to avoid pop-noise. The device is in mute mode when 2.5 V < VMODE < (Vcc-1.5 V).
Operating : In this mode the amplifier is operating normally. The operating mode is activated at VMODE < 0.5 V.
5-8 Vertical deflection
The vertical driver circuit is a bridge configuration. The deflection coil is connected between the output amplifiers,
which are driven in phase opposition. The differential input circuit is voltage driven. The input circuit is especially
intended for direct connection to driver circuits which deliver symmetrical current signals, but is also suitable for
asymmetrical currents. The output current of these devices is converted to voltages at the input pins via resistors R350
and R351. The differential input voltage is compared with the output current through the deflection coils measured as
voltage across R398, which provides internal feedback information. The voltage across R398 is proportional to the
output current.
5-8-1 Flyback voltage
The flyback voltage is determined by an additional supply voltage Vflb. The principle of operation with two supply
voltages (class G) makes it possible to fix the supply voltage Vp optimum for the scan voltage and the second supply
voltage Vflb optimum for the flyback voltage. Using this method, very high efficiency is achieved. The supply voltage
Vflb is almost totally available as flyback voltage across the coil, this being possible due to the absence of a coupling
capacitor.
5-8-2 Protection
The output circuit has protection circuits for :
- Too high die temperature
- overvoltage of output stage A
5-8-3 Guard circuit
The guard signal is not used.
5-8-4 Damping resistor
For HF loop stability a damping resistor (R331) is connected across the deflection coil.
5-8-5 EAST-WEST Amplifier (TDA8358J)
The East-West amplifier is current driven. It can only sink currents of the diode modulator circuit. A feedback resistor
R397 is connected between the input and output of this inverting amplifier in order to convert the East-West correction
input into an output voltage.
- 57 -
Service manual WP 895/895F, CP885/885F, CP485F
5-9 Power supply (STR F6654)
5-9-1 STR-F6654 general description
The STR-F6654 is an hybrid IC with a build-in MOSFET and control IC, designed for flyback converter type switch
mode power supply applications.
5-9-2 Power supply primary part operations
An oscillator generates pulses signals which turn on and off a MOSFET transistor.
5-9-2-1 Start-up circuit : VIN
The start-up circuit is used to start and stop the operation of the control IC, by detecting a voltage appearing at VIN
pin (pin 4).
- 58 -
Service manual WP 895/895F, CP885/885F, CP485F
When the power switch is pushed on, VIN increases slowly. During this time, C806 is charged through R802.
As soon as VIN reaches 16V, the STR-F6654 control circuit starts operating. Then, VIN is obtained by smoothing the
winding voltage which appears between pin6 and pin7 of the SMPS transformer.
As this winding voltage does not increase to the set voltage immediately after the control circuit starts operating, VIN
starts dropping. However, as this winding voltage reaches the set value before VIN voltage drops to the shutdown
voltage (at 11V), the control circuit continues operating (see below VIN voltage at start-up). R805 resistor prevents that
VIN pin voltage varies according to the secondary side output current.
VIN must be set higher than the shutdown voltage (VIN (off) = 11Vmax) and lower than the O.V.P. (overvoltage
protection) operating voltage
(VOVP = 20.5Vmin)
- 59 -
Service manual WP 895/895F, CP885/885F, CP485F
5-9-2-2 STR-F6654 oscillating operation
- 60 -
Service manual WP 895/895F, CP885/885F, CP485F
When the MOSFET is ON, the STR-F6654 internal capacitor C1 is charged at the constant voltage 6.5V.
At the same time, the voltage at pin 1 (OCP / FB) increases with the same waveform as the MOSFET drain current.
When the pin 1 voltage reaches the threshold voltage VTH1 = 0.73V, the STR-F6654 internal comparator 1 starts
operating. The STR-F6654 internal oscillator is inverted and the MOSFET turns OFF.
When the MOSFET turns OFF, charging of STR-F6654 internal capacitor C1 is released and C1 starts discharging
by the STR-F6654 internal resistance R1. So, C1 voltage starts falling in accordance with the gradient regulated by the
constant discharging time of C1 and R1. So, this means that the fixed time determined by C1 and R1 is the OFF-time
of the MOSFET.
When C1 voltage falls to around 3.7V, the STR-F6654 internal oscillator is reversed again and the MOSFET turns
ON. C1 is quickly charged to around 6.5V
The MOSFET continues to oscillate by repeating the above procedure.
5-9-2-3 STR-F6654 protection circuits
• overcurrent protection function (OCP)
Overcurrent protection is performed pulse by pulse detecting at STR-F6654 pin 1 (OCP) the peak of the MOSFET
drain current in every pulse.
• latch circuit
This circuit sustains an output low from the STR-F6654 internal oscillator and stops operation of the power supply
when overvoltage protection (OVP) and thermal shutdown (TSD) circuit are under operation
• thermal shutdown circuit (TSD)
This circuit triggers the latch circuit when the frame temperature of STR-F6654 IC exceeds 140°C
• overvoltage protection circuit (OVP)
This circuit triggers the latch circuit when the Vin voltage exceeds 22V (typ.)
- 61 -
Service manual WP 895/895F, CP885/885F, CP485F
5-10 TV start-up, TV normal run and stand by mode operations
5-10-1 TV start-up operations
* Schematic diagram for start-up operations
* TV start-up and microcontroller initialisation
- When SW801 power switch is pushed, main AC voltage is applied to T801 transformer (after rectification by D801...
D804 diodes). Then, T801 SMPS transformer starts operating and supplies DC voltage to I823 (5V regulator) and
to 3.3v Regulator circuit.
- There regulators provide 5V / 3.3V DC voltage to I501 microcontroller power supply pins (pin 3 / pin 54) and to the
reset pulse circuit which provides reset pulse to I501 microcontroller reset pin (pin 58).
- Then, the microcontroller starts its initialisation. Its power pin (pin 1) is set to high which allows delivery of power
supply voltages (123V~143V, 8V, 5V...). At this step, all IC’s start working but no picture appears on screen: I501 IC
doesn’t provide horizontal drive voltage.
- Then, the microcontroller consults I702 EEPROM via I2C bus to know the last TV set mode (normal run mode or
stand-by mode ) before switching off.
- 62 -
Service manual WP 895/895F, CP885/885F, CP485F
. If the TV set was on normal run mode before switching off, the microcontroller delivers horizontal drive voltage at pin
24 and picture appears on screen.
. If the TV set was on stand-by mode before switching off, the microcontroller switches TV set to stand-by mode,
decreasing power pin voltage (pin 1).
5-10-2 TV normal run and stand-by mode operations
Depending on remote control commands, I501 microcontroller part pin 1 (power) is set to :
- high for normal run mode
- low for stand-by mode
a) TV on normal run mode
* I501 microcontroller part pin 1 (power) effect
I501 microcontroller part pin 1 (power) is connected to the following circuit :
- 63 -
Service manual WP 895/895F, CP885/885F, CP485F
On normal run mode, I501 microcontroller pin 1 (power) is set to high
• So, I810 controlled rectifier is not conducting
- Q809 is conducting. So, Q808 is not conducting and Q807 is conducting
- So, Q807 collector is connected to the ground and I810 controlled rectifier gate pin is set to low (no
conducting)
• So, current from 14V DC voltage (from T801 SMPS transformer pin 13) does not flow through Q811 and Q810
transistors but flows through I806 IC error amplifier
- Q809 is conducting. So, Q810 is not conducting and no current flows from Q810 collector to the ground
Therefore, the power circuit diagram is the following one :
* power supply circuit diagram during TV set normal run
- 64 -
Service manual WP 895/895F, CP885/885F, CP485F
* power supply functioning during TV set normal run mode
- I801 transmits controlled pulses to T801 which generates DC voltages after rectifications by secondary part diodes
and electro capacitors (by example by D820 and C813 on 143V supply voltage line).
- 8V, 5V, 3.3V supply voltage lines have stabilized voltages obtained by I820, I822, I823 voltage regulators.
- On 143V supply voltage line, R823 resistor has been chosen to reach exact DC voltage required on this line.
- 143V supply voltage line includes an IC error amplifier (I806) which corrects unexpected DC voltage variations on
this line.
* power supply IC delivery during TV set normal run
power supply line
143V
IC power supply delivery
FBT
14.5V
14V
8V
5V
I602 sound amplifier pins 3-16
T401 H- drive
I601 Sound Demod pins 38-39-40
I101 If IC Pin 23
I501 Main IC pins 3-15-45
I601 Sound Demod pins 7-18-57
I702 EEPROM pin 8
tuner
I501 Main IC pin 25
I703 IR receiver pin 1
I501 Main IC Pin 3
I501 Main IC Pin 54
3.3V
S/B 5V
S/B 3.3V
Remarks
FBT supplies 43V to I301 vertical IC
FBT supplies 43V to T401 H-Drive
FBT supplies 12V to I301 vertical IC
FBT supplies 33V to the tuner
FBT supplies 188V to I901 video amplifier pin 6
b) TV set on stand-by mode
* TV set circuit diagram on stand-by mode
- 65 -
Service manual WP 895/895F, CP885/885F, CP485F
- 66 -
Service manual WP 895/895F, CP885/885F, CP485F
I810
CONTROLLED
RECTIFIER
7.5V DC
HIGH
R829
R830
R820
C830
HIGH
Q807
Q808
LOW
HIGH
Q809
POWER
LOW
Fig : I810 controlled rectifier switching circuit
* TV set stand-by mode operations
- On stand-by mode, I501 microcontroller pin 1 (power) is set to low.
- So, Q809 collector is set to high.
- Then, I810 controlled rectifier gate pin is set to high and I810 is conducting.
- So, current flows from pin 16 SMPS transformer to the ground via I804 optocoupler and Q810 and Q811 transistors
(which are conducting).
- In these conditions, I801 delivers pulses on light mode and T801 produces voltages with reduced power.
- As I810 is conducting, current flows also from pin 16 SMPS transformer to I823 (5V / 3.3V regulator) for I501
com, IR receiver and front mask buttons supply voltage (then, remote control or front mask buttons can be activated
to leave stand-by mode).
- 67 -
Service Manual WP-895/895F, CP885/885F, CP485F
6. Service Parts List
(DWX - 28W5 )
CAUTION
“
” Parts recommended for stock.
“ ® ” Safety critical componen, Replace only with genuine Deawoo safety parts.
LOC
M211
PART CODE
PART NAME
4852158911
COVER BACK
M211D
4857817611
CLOTH BLACK
M541
4855415800
SPEC PLATE
M201A
4857818701
CLOTH BLACK
M201B
4857818702
M211A
7172401612
DESCRIPTION
REMARK
HIPS GY
LOC
PART CODE
PART NAME
DECSCRIPTION
PW001 4857417700
TERM CLAMP
PT-01-T3
FELT 200X20X0.7
ZZ290
PTMPMSX28W5ZF
PCB MAIN MANUAL AS DWX-28W5ZZF
150ART P/E FILM (C/TV)
10
2193100801
SOLDER BAR
SN:PB=63:37 3PI(NO FLUX)
FELT T0.7 L=250 W=15
40
2291050314
FLUX SOLVENT
IM-1000
CLOTH BLACK
FELT T0.7 L=350 W=15
20
2193011101
SOLDER WIRE
SCREW TAPPTITE
TT2 TRS 4X16 MFZN BK
30
2291050617P FLUX SOLDER
CF-329D
RS 60-1.2 1.6A
M211B
7178301212
SCREW TAPPTITE
TT2 WAS 3X12 MFZN BK
50
2291140501
WAX COVER
60G/PC
M281
4852822601
DOOR
PC GY
60
2291051001
FLUX KILLER
KFT-7
M352
97P4602700
CLAMP CORD
NYLON 66 BLK 5280N
C106
CEXF1H221V C ELECTRO
50V RSS 220MF (10X16) TP
M391A
7172401612
SCREW TAPPTITE
TT2 TRS 4X16 MFZN BK
C118
CMCN1J474K C MYLAR
63V 0.47MF MKT
M481
4854859511
BUTTON POWER
ABS GY
C315
CEXF2A470V C ELECTRO
100V RSS 47MF (10X16) TP
M481A
4856716000
SPRING
SWPA PIE0.5
C402
CMYH3C123J C MYLAR
1.6KV 0.012MF J
M491
4854934001
BUTTON
ABS BK
C408
CMYE2G304J C MYLAR
400V 0.3MF J (PL)
M491A
7178301011
SCREW TAPPTITE
TT2 WAS 3X10 MFZN
C415
CEXF2E479V C ELECTRO
250V RSS 4.7MF (10X16)TP
M501
4855059901
DECO CTRL
PVC T0.25
C430
CCXB3D681K C CERA
2KV B 680PF K (TAPPING)
M561
4855617401
MARK BRAND
AL (SILVER)
C431
CMXB2G472J C MYLAR
400V 4700PF J TP
M681
4856812001
TIE CABLE
NYLON66 DA100
C440
CMXE2G273J C MYLAR
400V PU 0.027MF J (T
M682
4856816300
CLAMP WIRE
NYLON 6 (V0)
C499
CEYD1H689W C ELECTRO
50V RHD 6.8MF (16X35.5)
M791
4857923300
DOOR LOCK
LA701(KIFCO)
C604
CEXF1E102V C ELECTRO
25V RSS 1000MF (13X20) TP
SP01A
7172401212
SCREW TAPPTITE
TT2 TRS 4X12 MFZNCK
C801
CL1JB3474K
AC250V 0.47MF U/C/SNDF/SV
SP02A
7172401212
SCREW TAPPTITE
TT2 TRS 4X12 MFZNCK
C805
CEYN2G181P C ELECTRO
V901A
4856215402
WASHER RUBBER
CR T2.0
C811
CCYR3D681K C CERA
2KV R 680PF K 125C
V901B
4856015800
SCREW CRT FIX
L=27
C812
CH1AFE472M C CERA AC
4KV 4700PF M KX DE1610
C LINE ACROSS
400V LHS 180MF (25X35)
M201
4852077111
MASK FRONT
HIPS GY
C813
CEXF2E101V C ELECTRO
250V RSS 100MF 18X35.5
M801
4858058900
BOX CARTON
DW-3
C814
CEYF2E470V C ELECTRO
250V RSS 47MF (16X25
M811
4858196500
PAD
EPS 28W5
C820
CCYR3A471K C CERA
1KV 470PF K 125C
M822
4858215600
BAG P.E
PE FOAM t0.5x1600x1270
C823
CEXF1E102V C ELECTRO
25V RSS 1000MF (13X20) TP
V901
4859628160
CRT
W66ECK001X13
C832
CEXF1E102V C ELECTRO
25V RSS 1000MF (13X20) TP
ZZ132
58G0000151
COIL DEGAUSSING
DC-28SFW
C840
CEXF1C222V C ELECTRO
16V RSS 2200MF(13X25)TP
ZZ131
4851902110
CRT GROUND NET
24/5/0.12-1560+4850702029
C841
CEXF1C332V C ELECTRO
16V RSS 3300MF
®
®
ZZ100
48B4846G22
TRANSMITTER REMOCON
R-46G22
C861
CEXF1E102C C ELECTRO
25V RUS 1000MF 13X20 TP
00030
4850Q00910
BATTERY
R03/NN
C866
CCYR3A471K C CERA
1KV 470PF K 125C
M681
4856812400
BAND
18MM X 3M
C900
CCXB3D102K C CERA
2KV B 1000 PF K (TAPPING)
M801
4858058900
BOX CARTON
DW-3
C910
CEXF2E479V C ELECTRO
250V RSS 4.7MF (10X16)TP
M811
4858196500
PAD
EPS 28W5
C997
CEXF2E100V C ELECTRO
250V RSS 10MF (10X20) TP
M822
4858215600
BAG P.E
PE FOAM t0.5x1600x1270
D403
DBY228——
BY228
0000A
4857027800
HEAT SINK
AL EX
D404
DBYW76—— DIODE
BYW76
0000B
7174300811
SCREW TAPPTITE
TT2 RND 3X8 MFZN
D820
DBYW76—— DIODE
BYW76
SP01
4858311110
SPEAKER
12W 8 OHM SP-58126F
D860
DBYW76—— DIODE
BYW76
SP02
4858311110
F801
5FSCB4022R FUSE CERA
SEMKO F4AH 4A 250V MF51
SPEAKER
12W 8 OHM SP-58126F
®
®
- 68 -
DIODE
REMARK
Service Manual WP-895/895F, CP885/885F, CP485F
LOC
G900
PART CODE
4SG0D00103
PART NAME
DESCRIPTION
SPARK GAP
S-23 900V-1.5KV
REMARK
LOC
PART CODE
PART NAME
DECSCRIPTION
Q401B 7174300811
SCREW TAPPTITE
TT2 RND 3X8 MFZN
R398
RD-2Z109J-
R CARBON FILM
1/2 1 OHM J
I101
1TDA4470M-
IC IF
TDA4470-M
I301
1TDA8358J-
IC VERTICAL
TDA8358J
R399
RS02Y180JS
R M-OXIDE FILM
2W 18 OHM J SMALL
I301A
4857028227
HEAT SINK
AL EX ANODIZING
R415
RS02Y102JS
R M-OXIDE FILM
2W 1K OHM J SMALL
I301B
7174301011
SCREW TAPPTITE
TT2 RND 3X10 MFZN
R450
RS02Y223JS
R M-OXIDE FILM
2W 22K OHM J SMALL
I501
1DW3834AE1
IC MICOM
DW3834A-AE1
R801
DPC7R0M290
POSISTOR
96709 (PHILIPS)
I601
1MSP3410G-
IC SOUND PROCESSOR
MSP3410G
R802
RS02Y753JS
R M-OXIDE FILM
2W 75K OHM J SMALL
I602
1TDA8946J-
IC AUDIO
TDA8946J
R803
RS02Y473JS
R M-OXIDE FILM
2W 47K OHM J SMALL
I602A
4857028215
HEAT SINK
AL EX NO ANODOZING
R804
RF02Y228K-
R FUSIBLE
2W 0.22 OHM K
I602B
7174301011
SCREW TAPPTITE
TT2 RND 3X10 MFZN
R819
RX10T339J-
R CEMENT
10W 3.3 OHM J TRIPOD
I702
1AT24C16PC
IC MEMORY
AT24C16-10PC
R850
RS02Y229JS
R M-OXIDE FILM
2W 2.2 OHM J SMALL
I703
1TSOP1238W
IC PREAMP
TSOP1238WI1
R906
RF01Y479J-
R FUSIBLE
1W 4.7 OHM J
I801
1STRF6654-
IC SMPS
STR-F6654
SCT1
4859303530
SOCKET CRT
PCS629-03C
®
®
®
®
®
®
®
I801A
4857027701
HEAT SINK
AL EX
SF1
5PK3953M—
FILTER SAW
K3953M
I801B
7174300811
SCREW TAPPTITE
TT2 RND 3X8 MFZN
SF2
5PK9650M—
FILTER SAW
K9650M
I804
1KP1010C—
IC PHOTO COUPLER
KP-1010C
SW801 5S40101143
SW PUSH
PS3-22SP (P.C.B)
I806
1SE130N—
IC
SE130N
T401
50D19A1—
TRANS DRIVE
TD-19A1
I810
TX0202DA—
THYRISTOR
X0202DA
T402
50H0000225
FBT
1342.0040B
I820
1KA7805—
IC REGULATOR
KA7805
T801
50M4936B2-
TRANS SMPS
2094.0057B
I822
1KA7808—
IC REGULATOR
KA7808
U100
4859722430
TUNER VARACTOR
UV1316/AIG-3
I823
1KA7805—
IC REGULATOR
KA7805
X501
5XE20R250E
CRYSTAL QUARTZ
HC-49/U 20.2500MHZ 30PPM
I901
1TDA6107Q-
IC VIDEO
TDA6107Q
X601
5XE18R432E
CRYSTAL QUARTZ
HC-49/U 18.43200MHZ 30PPM
I901A
4857031100
HEAT SINK
A1050P-H24 T2.0
Z153
5PYXT5R5MB
FILTER CERA
XT5.5MB
I901B
7174300811
SCREW TAPPTITE
TT2 RND 3X8 MFZN
ZZ200
PTMPJBX28W5LF
PCB MAIN EYE LET AS DWX-28W5ZLF
JP01
4859102130
JACK EARPHONE
YSC-1537
C402
4856310300
EYE LET
BSR T0.2 (R1.6)
JPA1
4859200401
SOCKET RGB
SR-21A1 (ANGLE TYPE)
C404
4856310300
EYE LET
BSR T0.2 (R1.6)
JPA2
4859200401
SOCKET RGB
SR-21A1 (ANGLE TYPE)
C408
4856310300
EYE LET
BSR T0.2 (R1.6)
JPA3
4859108450
JACK PIN BOARD
YSC03P-4120-14A
C805
4856310600
EYE LET
BSR 2.3(R2.3)
L150
58E0000041
COIL AFT
TRF-A005
D403
4856310600
EYE LET
BSR 2.3(R2.3)
L380
58C0000120
COIL CHOKE
CH-100Q
D404
4856310600
EYE LET
BSR 2.3(R2.3)
L381
58C0000120
COIL CHOKE
CH-100Q
I301A
4856310600
EYE LET
BSR 2.3(R2.3)
®
®
®
L401
58H0000067
COIL H-LINEARITY
TRL-240B
I602A
4856310600
EYE LET
BSR 2.3(R2.3)
L402
58C0000122
COIL CHOKE
CH-401B
I801A
4856310600
EYE LET
BSR 2.3(R2.3)
L802
58C9430599
COIL CHOKE
AZ-9004Y(94MH)
L401
4856310300
EYE LET
BSR T0.2 (R1.6)
LF801
5PLF24A1—
FILTER LINE
LF-24A1
Q401
4856310300
EYE LET
BSR T0.2 (R1.6)
M351
4858900002
HOLDER LED AS
LH-3P
R819
4856310300
EYE LET
BSR T0.2 (R1.6)
P102
4859231620
CONN WAFER
YW025-03
SW801 4856310600
EYE LET
BSR 2.3(R2.3)
P401
4850706N08
CONNECTOR
6PIN 500MM BOARD IN TYPE
T402
4856310600
EYE LET
BSR 2.3(R2.3)
P402
4859240120
CONN WAFER
YFW500-06
T801
4856310300
EYE LET
BSR T0.2 (R1.6)
P501
4850705N14
CONNECTOR
BIC-05T-25T+ULW=500
ZZ200
PTMPJRX28W5LF
PCB MAIN RADIAL AS
DWX-28W5ZLF
P601
4859231720
CONN WAFER
YW025-04
C102
CEXF1E470V
C ELECTRO
25V RSS 47MF (5X11) TP
P702
4859231720
CONN WAFER
YW025-04
C110
CXCH1H150J C CERA
50V CH 15PF J (TAPPING)
P801
4859242220
CONN WAFER
YFW800-02
C117
CEXF1H229V C ELECTRO
50V RSS 2.2MF (5X11) TP
P802
4859242220
CONN WAFER
YFW800-02
C121
CEXF1H100V C ELECTRO
50V RSS 10MF (5X11) TP
P903
4859238620
CONN WAFER
YPW500-02
C122
CEXF1H100V C ELECTRO
50V RSS 10MF (5X11) TP
Q401
T2SD1880—
TR
2SD1880
C152
CEXF1H100V C ELECTRO
50V RSS 10MF (5X11) TP
HEAT SINK
AL EX
C153
CEXF1H479V
50V RSS 4.7MF (5*11) TP
Q401A 4857024500
®
- 69 -
C ELECTRO
REMARK
®
,®
®
Service Manual WP-895/895F, CP885/885F, CP485F
LOC
PART CODE
PART NAME
DESCRIPTION
REMARK
LOC
PART CODE
PART NAME
DECSCRIPTION
C156
CBXF1H104Z
C CERA SEMI
50V F 0.1MF Z (TAPPING)
C623
CEXF1H109V C ELECTRO
50V RSS 1MF (5X11) TP
C157
CEXF1H100V
C ELECTRO
50V RSS 10MF (5X11) TP
C624
CEXF1H109V C ELECTRO
50V RSS 1MF (5X11) TP
CEXF1E101V
C ELECTRO
25V RSS 100MF (6.3X11) TP
C158
CBXF1H104Z
C CERA SEMI
50V F 0.1MF Z (TAPPING)
C625
C164
CEXF1E470V
C ELECTRO
25V RSS 47MF (5X11) TP
C626
CEXF1E101V
C ELECTRO
25V RSS 100MF (6.3X11) TP
100V 0.22MF J BULK
C629
CBXF1H104Z
C CERA SEMI
50V F 0.1MF Z (TAPPING)
C301
CMXM2A224J
C MYLAR
C305
CEXF1E221V
C ELECTRO
25V RSS 220MF (8X11.5) TP
C630
CEXF1E470V
C ELECTRO
25V RSS 47MF (5X11) TP
C313
CMXM2A104J
C MYLAR
100V 0.1MF J TP
C634
CEXF1H100V C ELECTRO
50V RSS 10MF (5X11) TP
C320
CBXF1H104Z
C CERA SEMI
50V F 0.1MF Z (TAPPING)
C635
CCXB1H102K C CERA
50V B 1000PF K (TAPPING)
C340
CMXM2A683J
C MYLAR
100V 0.068MF J TP
C636
CEXF1E470V
C ELECTRO
25V RSS 47MF (5X11) TP
C341
CCXB1H102K
C CERA
50V B 1000PF K (TAPPING)
C641
CEXF1E101V
C ELECTRO
25V RSS 100MF (6.3X11) TP
50V F 0.022MF Z (TAPPING)
C642
CEXF1E101V
C ELECTRO
25V RSS 100MF (6.3X11) TP
50V F 0.022MF Z (TAPPING)
C660
CEXF1C100A C ELECTRO
16V RSM 10MF 5X7
CMXM2A224J C MYLAR
100V 0.22MF J BULK
C350
C351
CCXF1H223Z
CCXF1H223Z
C CERA
C CERA
C370
CCXF1H473Z
C CERA
50V F 0.047MF Z (TAPPING)
C661
C401
CEXF1H101V
C ELECTRO
50V RSS 100MF (8*11.5) TP
C662
CMXM2A224J C MYLAR
100V 0.22MF J BULK
C412
CEXF2C339V
C ELECTRO
160V RSS 3.3MF (8X16) TP
C665
CCXB1H472K C CERA
50V B 4700PF K (TAPPING)
C418
CCXB1H102K
C CERA
50V B 1000PF K (TAPPING)
C666
CBXF1H104Z
C420
CCXB2H222K
C CERA
500V B 2200PF K (TAPPING)
C667
CCXB1H472K C CERA
50V B 4700PF K (TAPPING)
C424
CMXM2A333J
C MYLAR
100V 0.033MF J TP
C668
CMXM2A224J C MYLAR
100V 0.22MF J BULK
25V RSS 100MF (6.3X11) TP
C669
CMXM2A224J C MYLAR
100V 0.22MF J BULK
25V RSS 47MF (5X11) TP
C670
CEXF1H100V C ELECTRO
50V RSS 10MF (5X11) TP
50V RSS 22MF (5X11) TP
C690
CEXF1H479V
C ELECTRO
50V RSS 4.7MF (5*11) TP
C502
C504
CEXF1E101V
CEXF1E470V
C ELECTRO
C ELECTRO
C ELECTRO
C CERA SEMI
50V F 0.1MF Z (TAPPING)
C508
CEXF1H220V
C510
CCXF1H473Z
C CERA
50V F 0.047MF Z (TAPPING)
C691
CEXF1H479V
C ELECTRO
50V RSS 4.7MF (5*11) TP
C511
CEXF1H100V
C ELECTRO
50V RSS 10MF (5X11) TP
C770
CEXF1C101V
C ELECTRO
16V RSS 100MF (6.3X11) TP
C519
CEXF1H109V
C ELECTRO
50V RSS 1MF (5X11) TP
C803
CCXF3A472Z
C CERA
1KV F 4700PF Z (T)
C520
CEXF1H109V
C ELECTRO
50V RSS 1MF (5X11) TP
C804
CCXF3A472Z
C CERA
1KV F 4700PF Z (T)
C521
CEXF1H109V
C ELECTRO
50V RSS 1MF (5X11) TP
C806
CEXF1H330V
C ELECTRO
50V RSS 33MF (6.3X11) TP
C522
CEXF1H109V
C ELECTRO
50V RSS 1MF (5X11) TP
C807
CCXF1H473Z
C CERA
50V F 0.047MF Z (TAPPING)
CEXF1H479V
C ELECTRO
50V RSS 4.7MF (5*11) TP
C525
CEXF1H220V
C ELECTRO
50V RSS 22MF (5X11) TP
C808
C528
CCXF1H223Z
C CERA
50V F 0.022MF Z (TAPPING)
C809
CCXB1H102K C CERA
C529
CCXF1H223Z
C CERA
50V F 0.022MF Z (TAPPING)
C821
CCXB1H102K C CERA
50V B 1000PF K (TAPPING)
C530
CCXF1H223Z
C CERA
50V F 0.022MF Z (TAPPING)
C824
CCXB3A471K C CERA
1KV B 470PF K (T)
C546
CEXF1H339V
C ELECTRO
50V RSS 3.3MF (5X11) TP
C831
CCXB3A471K C CERA
1KV B 470PF K (T)
C549
CEXF1H229V
C ELECTRO
50V RSS 2.2MF (5X11) TP
C835
CEXF1E470V
C ELECTRO
25V RSS 47MF (5X11) TP
C553
CEXF1E101V
C ELECTRO
25V RSS 100MF (6.3X11) TP
C844
CEXF1E101V
C ELECTRO
25V RSS 100MF (6.3X11) TP
50V RSS 22MF (5X11) TP
C850
CCXB1H821K C CERA
50V B 820PF K (TAPPING)
CEXF1E101V
25V RSS 100MF (6.3X11) TP
C597
CEXF1H220V
C ELECTRO
C ELECTRO
50V B 1000PF K (TAPPING)
C602
CEXF1E221V
C ELECTRO
25V RSS 220MF (8X11.5) TP
C863
C605
CEXF1E470V
C ELECTRO
25V RSS 47MF (5X11) TP
C888
CEXF1C470V C ELECTRO
C608
CEXF1H100V
C ELECTRO
50V RSS 10MF (5X11) TP
C902
CMXL2E104K C MYLAR
250V 0.1MF K MEU TP
C610
CEXF1H100V
C ELECTRO
50V RSS 10MF (5X11) TP
F801A
4857415001
CLIP FUSE
PFC5000-0702
PFC5000-0702
16V RSS 47MF (5X11) TP
C611
CEXF1H339V
C ELECTRO
50V RSS 3.3MF (5X11) TP
F801B
4857415001
CLIP FUSE
C612
CEXF1H109V
C ELECTRO
50V RSS 1MF (5X11) TP
L101
5CPX479K—
COIL PEAKING
4.7UH K RADIAL
C613
CEXF1H109V
C ELECTRO
50V RSS 1MF (5X11) TP
Q103
T2SC5343Y-
TR
2SC5343Y
C614
CEXF1H109V
C ELECTRO
50V RSS 1MF (5X11) TP
Q104
T2SC5343Y-
TR
2SC5343Y
50V RSS 1MF (5X11) TP
Q120
T2SC5343Y-
TR
2SC5343Y
50V RSS 10MF (5X11) TP
Q150
T2SC5343Y-
TR
2SC5343Y
C615
CEXF1H109V
C ELECTRO
C616
CEXF1H100V
C ELECTRO
C617
CBXF1H104Z
C CERA SEMI
50V F 0.1MF Z (TAPPING)
Q151
T2SC5343Y-
TR
2SC5343Y
C622
CXCH1H680J
C CERA
50V CH 68PF J (TAPPING)
Q333
T2SC5343Y-
TR
2SC5343Y
- 70 -
REMARK
Service Manual WP-895/895F, CP885/885F, CP485F
LOC
Q334
PART CODE
T2SC5343Y-
PART NAME
TR
LOC
PART CODE
2SC5343Y
C161
CZSL1H220J
C CERA
50V SL 22PF J (AXIAL)
DESCRIPTION
REMARK
PART NAME
DECSCRIPTION
Q402
T2SD1207T-
TR
2SD1207-T (TAPPING)
C163
CCZF1H103Z
C CERA
50V F 0.01MF Z
Q510
T2SC5343Y-
TR
2SC5343Y
C500
CCZF1H103Z
C CERA
50V F 0.01MF Z
Q511
T2SC5343Y-
TR
2SC5343Y
C501
CCZF1H103Z
C CERA
50V F 0.01MF Z
Q542
T2SA1980Y-
TR
2SA1980Y
C503
CBZF1H104Z
C CERA SEMI
50V F 0.1MF Z (AXIAL)
Q543
T2SA1980Y-
TR
2SA1980Y
C505
CCZB1H102K
C CERA
50V B 1000PF K (AXIAL)
Q544
T2SA1980Y-
TR
2SA1980Y
C506
CBZF1H104Z
C CERA SEMI
50V F 0.1MF Z (AXIAL)
Q550
T2SC5343Y-
TR
2SC5343Y
C507
CCZF1H103Z
C CERA
50V F 0.01MF Z
Q599
T2SA1980Y-
TR
2SA1980Y
C509
CCZF1H103Z
C CERA
50V F 0.01MF Z
Q601
T2SA1980Y-
TR
2SA1980Y
C512
CCZF1H103Z
C CERA
50V F 0.01MF Z
Q701
T2SC5343Y-
TR
2SC5343Y
C516
CCZB1H102K
C CERA
50V B 1000PF K (AXIAL)
Q702
T2SA1980Y-
TR
2SA1980Y
C526
CBZF1H104Z
C CERA SEMI
50V F 0.1MF Z (AXIAL)
Q807
T2SC5343Y-
TR
2SC5343Y
C527
CCZB1H102K
C CERA
50V B 1000PF K (AXIAL)
Q808
T2SC5343Y-
TR
2SC5343Y
C534
CCZB1H333K
C CERA
50V B 0.033MF K (AXIAL)
Q809
T2SC5343Y-
TR
2SC5343Y
C535
CCZB1H333K
C CERA
50V B 0.033MF K (AXIAL)
Q810
T2SC5343Y-
TR
2SC5343Y
C536
CCZB1H333K
C CERA
50V B 0.033MF K (AXIAL)
Q811
T2SC5343Y-
TR
2SC5343Y
C547
CBZF1H104Z
C CERA SEMI
50V F 0.1MF Z (AXIAL)
Q850
T2SC5343Y-
TR
2SC5343Y
C548
CBZF1H104Z
C CERA SEMI
50V F 0.1MF Z (AXIAL)
Q851
T2SC5343Y-
TR
2SC5343Y
C554
CBZF1H104Z
C CERA SEMI
50V F 0.1MF Z (AXIAL)
QA1
T2SC5343Y-
TR
2SC5343Y
C560
CCZB1H101K
C CERA
50V B 100PF K (AXIAL)
RB10
RV5426103P
R SEMI FIXED
RH0638C 10K OHM B
C561
CCZB1H101K
C CERA
50V B 100PF K (AXIAL)
SW700
5S50101090
SW TACT
SKHV17910A
C568
CBZF1H104Z
C CERA SEMI
50V F 0.1MF Z (AXIAL)
SW701
5S50101090
SW TACT
SKHV17910A
C571
CCZB1H101K
C CERA
50V B 100PF K (AXIAL)
SW702
5S50101090
SW TACT
SKHV17910A
C578
CCZB1H221K
C CERA
50V B 220PF K (AXIAL)
SW703
5S50101090
SW TACT
SKHV17910A
C579
CCZB1H221K
C CERA
50V B 220PF K (AXIAL)
SW704
5S50101090
SW TACT
SKHV17910A
C581
CCZB1H101K
C CERA
50V B 100PF K (AXIAL)
Z601
5PXF1B471M
FILTER EMI
CFI 06 B 1H 470PF
C585
CCZB1H101K
C CERA
50V B 100PF K (AXIAL)
Z602
5PXF1B471M
FILTER EMI
CFI 06 B 1H 470PF
C589
CCZB1H221K
C CERA
50V B 220PF K (AXIAL)
Z603
5PXF1B471M
FILTER EMI
CFI 06 B 1H 470PF
C590
CZCH1H309C
C CERA
50V CH 3PF C (AXIAL)
Z604
5PXF1B471M
FILTER EMI
CFI 06 B 1H 470PF
C591
CZCH1H309C
C CERA
50V CH 3PF C (AXIAL)
Z605
5PXF1B471M
FILTER EMI
CFI 06 B 1H 470PF
C601
CCZB1H472K
C CERA
50V B 4700PF K (AXIAL)
Z606
5PXF1B471M
FILTER EMI
CFI 06 B 1H 470PF
C603
CCZB1H472K
C CERA
50V B 4700PF K (AXIAL)
Z607
5PXF1B471M
FILTER EMI
CFI 06 B 1H 470PF
C620
CZCH1H309C
C CERA
50V CH 3PF C (AXIAL)
Z608
5PXF1B471M
FILTER EMI
CFI 06 B 1H 470PF
C621
CZCH1H309C
C CERA
50V CH 3PF C (AXIAL)
ZZ200
PTMPJAX28W5LF
PCB MAIN AXIAL AS
DWX-28W5ZLF
C631
CBZF1H104Z
C CERA SEMI
50V F 0.1MF Z (AXIAL)
20
2TM10006LB
TAPE MASKING
3M #232-MAP-C 6.2X2000M
C650
CZSL1H680J
C CERA
50V SL 68PF J (AXIAL)
10
2TM14006LB
TAPE MASKING
3M #232 6.0X2000M
C830
CBZF1H104Z
C CERA SEMI
50V F 0.1MF Z (AXIAL)
A001
4859805093
PCB MAIN
WP-895
CA1
CCZB1H101K
C CERA
50V B 100PF K (AXIAL)
C101
CCZB1H101K C CERA
50V B 100PF K (AXIAL)
CA10
CCZB1H102K
C CERA
50V B 1000PF K (AXIAL)
C103
CCZB1H102K C CERA
50V B 1000PF K (AXIAL)
CA13
CCZB1H471K
C CERA
50V B 470PF K (AXIAL)
C104
CCZB1H102K C CERA
50V B 1000PF K (AXIAL)
CA14
CCZB1H471K
C CERA
50V B 470PF K (AXIAL)
C116
CBZF1H104Z
C CERA SEMI
50V F 0.1MF Z (AXIAL)
CA15
CCZB1H471K
C CERA
50V B 470PF K (AXIAL)
C119
CCZF1H103Z
C CERA
50V F 0.01MF Z
CA16
CCZB1H471K
C CERA
50V B 470PF K (AXIAL)
C120
CCZB1H102K C CERA
50V B 1000PF K (AXIAL)
CA17
CCZB1H471K
C CERA
50V B 470PF K (AXIAL)
C151
CCZF1H103Z
C CERA
50V F 0.01MF Z
CA18
CCZB1H471K
C CERA
50V B 470PF K (AXIAL)
C154
CCZF1H103Z
C CERA
50V F 0.01MF Z
CA19
CCZB1H222K
C CERA
50V B 2200PF K (AXIAL)
C160
CCZF1H103Z
C CERA
50V F 0.01MF Z
CA2
CCZB1H101K
C CERA
50V B 100PF K (AXIAL)
- 71 -
REMARK
Service Manual WP-895/895F, CP885/885F, CP485F
LOC
PART CODE
50V B 2200PF K (AXIAL)
D840
D1N4148—
DIODE
1N4148 (TAPPING)
C CERA
50V B 100PF K (AXIAL)
D841
D1N4148—
DIODE
1N4148 (TAPPING)
C CERA
50V B 1000PF K (AXIAL)
D850
DUZ2R7B—
DIODE ZENER
UZ-2.7B
C CERA
50V B 470PF K (AXIAL)
D911
DBAV21——
DIODE
BAV21 (TAPPING)
CCZB1H471K
C CERA
50V B 470PF K (AXIAL)
D912
DBAV21——
DIODE
BAV21 (TAPPING)
D100
DUZ33B——
DIODE ZENER
UZ-33B
D913
DBAV21——
DIODE
BAV21 (TAPPING)
D101
DBAT85——
DIODE
BAT85 (TAPPING)
D997
DBYT51J—
DIODE
BYT51J (TAPPING)
D103
D1SS85TA—
DIODE
1SS85TA
DA10
DTZX5V6B—
DIODE ZENER
TZX5V6B (TAPPING)
D313
DBYW36——
DIODE
BYW36 (TAPPING)
DA11
DTZX5V6B—
DIODE ZENER
TZX5V6B (TAPPING)
D360
DTZX22C—
DIODE ZENER
TZX22C (TAPPING)
DA15
DTZX5V6B—
DIODE ZENER
TZX5V6B (TAPPING)
D361
DUZ33B——
DIODE ZENER
UZ-33B
DA16
DTZX5V6B—
DIODE ZENER
TZX5V6B (TAPPING)
D362
DUZ33B——
DIODE ZENER
UZ-33B
DA20
DTZX5V6B—
DIODE ZENER
TZX5V6B (TAPPING)
D367
DUZ33B——
DIODE ZENER
UZ-33B
DA27
DTZX5V6B—
DIODE ZENER
TZX5V6B (TAPPING)
D405
DBYW36——
DIODE
BYW36 (TAPPING)
DA3
DTZX5V1B—
DIODE ZENER
TZX5V1B (TAPPING)
D407
DBYW36——
DIODE
BYW36 (TAPPING)
DA32
DTZX5V6B—
DIODE ZENER
TZX5V6B (TAPPING)
D408
DBYW36——
DIODE
BYW36 (TAPPING)
DA6
DTZX5V6B—
DIODE ZENER
TZX5V6B (TAPPING)
D410
D1N4004S—
DIODE
1N4004S
DA7
DTZX5V1B—
DIODE ZENER
TZX5V1B (TAPPING)
D411
D1N4004S—
DIODE
1N4004S
DA8
DTZX5V6B—
DIODE ZENER
TZX5V6B (TAPPING)
D450
DBYW36——
DIODE
BYW36 (TAPPING)
DA9
DTZX5V6B—
DIODE ZENER
TZX5V6B (TAPPING)
D520
D1N4148—
DIODE
1N4148 (TAPPING)
J003
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
D521
D1N4148—
DIODE
1N4148 (TAPPING)
J005
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
D533
D1N4148—
DIODE
1N4148 (TAPPING)
J006
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
D534
D1N4148—
DIODE
1N4148 (TAPPING)
J007
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
D537
D1N4148—
DIODE
1N4148 (TAPPING)
J008
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
D550
D1N4148—
DIODE
1N4148 (TAPPING)
J009
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
D551
D1N4148—
DIODE
1N4148 (TAPPING)
J013
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
D591
DUZ2R7B—
DIODE ZENER
UZ-2.7B
J015
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
D597
D1N4148—
DIODE
1N4148 (TAPPING)
J016
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
D598
D1N4148—
DIODE
1N4148 (TAPPING)
J018
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
D599
DTZX5V6B—
DIODE ZENER
TZX5V6B (TAPPING)
J019
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
D601
D1N4148—
DIODE
1N4148 (TAPPING)
J022
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
D602
D1N4148—
DIODE
1N4148 (TAPPING)
J023
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
D603
D1N4148—
DIODE
1N4148 (TAPPING)
J024
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
D801
DBYT51J—
DIODE
BYT51J (TAPPING)
J025
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
D802
DBYT51J—
DIODE
BYT51J (TAPPING)
J036
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
D803
DBYT51J—
DIODE
BYT51J (TAPPING)
J037
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
D804
DBYT51J—
DIODE
BYT51J (TAPPING)
J038
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
D805
DBYW36——
DIODE
BYW36 (TAPPING)
J046
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
D806
DBYW36——
DIODE
BYW36 (TAPPING)
J047
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
D808
DBYW36——
DIODE
BYW36 (TAPPING)
J053
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
D809
DBYW36——
DIODE
BYW36 (TAPPING)
J054
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
D811
DTZX6V2—
DIODE ZENER
TZX6V2B (TAPPING)
J056
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
D821
DBYW36——
DIODE
BYW36 (TAPPING)
J057
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
D824
D1N4148—
DIODE
1N4148 (TAPPING)
J058
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
D825
D1N4148—
DIODE
1N4148 (TAPPING)
J061
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
D830
DBYW36——
DIODE
BYW36 (TAPPING)
J065
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
D831
DBYW36——
DIODE
BYW36 (TAPPING)
J070
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
LOC
PART CODE
CA20
CCZB1H222K
CA3
CCZB1H101K
CA4
CCZB1H102K
CA7
CCZB1H471K
CA8
PART NAME
C CERA
DESCRIPTION
REMARK
- 72 -
PART NAME
DECSCRIPTION
REMARK
Service Manual WP-895/895F, CP885/885F, CP485F
LOC
PART CODE
PART NAME
DESCRIPTION
REMARK
LOC
PART CODE
PART NAME
DECSCRIPTION
J072
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
J891
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
J073
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
J896
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
J075
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
J903
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
J076
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
J909
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
J079
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
J912
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
J080
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
J914
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
J082
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
J915
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
J088
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
J916
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
J100
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
J917
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
J101
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
J918
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
J120
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
J919
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
J123
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
J920
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
J124
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
L105
5CPZ479K02
COIL PEAKING
4.7UH 3.5MM K (LAL02TB)
J153
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
L153
5CPZ120K02
COIL PEAKING
12UH 3.5MM K (LAL02TB)
J166
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
L501
5CPZ479K02
COIL PEAKING
4.7UH 3.5MM K (LAL02TB)
J201
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
L502
5CPZ479K02
COIL PEAKING
4.7UH 3.5MM K (LAL02TB)
J234
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
L503
5CPZ479K02
COIL PEAKING
4.7UH 3.5MM K (LAL02TB)
J826
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
L504
5CPZ479K02
COIL PEAKING
4.7UH 3.5MM K (LAL02TB)
J827
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
L601
5CPZ479K02
COIL PEAKING
4.7UH 3.5MM K (LAL02TB)
J828
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
L602
5CPZ479K02
COIL PEAKING
4.7UH 3.5MM K (LAL02TB)
J829
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
L605
5CPZ479K02
COIL PEAKING
4.7UH 3.5MM K (LAL02TB)
J833
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
L650
5MC0000100
COIL BEAD
MD-5 (HC-3550)
J835
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
L801
5MC0000100
COIL BEAD
MD-5 (HC-3550)
J836
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
LA1
5CPZ100K04
COIL PEAKING
10UH 10.5MM K (LAL04TB)
J840
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
LA2
5CPZ100K04
COIL PEAKING
10UH 10.5MM K (LAL04TB)
J841
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
LA3
5CPZ100K04
COIL PEAKING
10UH 10.5MM K (LAL04TB)
J844
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
LA4
5CPZ100K04
COIL PEAKING
10UH 10.5MM K (LAL04TB)
J845
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
R101
RD-AZ222J-
R CARBON FILM
1/6 2.2K OHM J
J846
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
R103
RD-AZ123J-
R CARBON FILM
1/6 12K OHM J
J853
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
R104
RD-AZ104J-
R CARBON FILM
1/6 100K OHM J
J858
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
R105
RD-AZ272J-
R CARBON FILM
1/6 2.7K OHM J
J859
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
R106
RD-AZ561J-
R CARBON FILM
1/6 560 OHM J
J860
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
R107
RD-AZ561J-
R CARBON FILM
1/6 560 OHM J
J865
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
R110
RD-AZ682J-
R CARBON FILM
1/6 6.8K OHM J
J873
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
R111
RD-AZ222J-
R CARBON FILM
1/6 2.2K OHM J
J874
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
R116
RD-AZ682J-
R CARBON FILM
1/6 6.8K OHM J
J876
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
R117
RD-AZ682J-
R CARBON FILM
1/6 6.8K OHM J
J878
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
R118
RD-AZ151J-
R CARBON FILM
1/6 150 OHM J
J879
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
R120
RD-AZ101J-
R CARBON FILM
1/6 100 OHM J
J880
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
R131
RD-AZ472J-
R CARBON FILM
1/6 4.7K OHM J
J881
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
R151
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
J882
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
R152
RD-AZ271J-
R CARBON FILM
1/6 270 OHM J
J883
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
R153
RD-AZ470J-
R CARBON FILM
1/6 47 OHM J
J885
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
R154
RD-AZ470J-
R CARBON FILM
1/6 47 OHM J
J887
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
R155
RD-AZ751J-
R CARBON FILM
1/6 750 OHM J
J888
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
R160
RD-AZ472J-
R CARBON FILM
1/6 4.7K OHM J
J889
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
R161
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
- 73 -
REMARK
Service Manual WP-895/895F, CP885/885F, CP485F
LOC
PART CODE
R162
RD-AZ153J-
R CARBON FILM
1/6 15K OHM J
R540
RD-AZ101J-
R CARBON FILM
1/6 100 OHM J
R163
RD-AZ752J-
R CARBON FILM
1/6 7.5K OHM J
R541
RD-AZ122J-
R CARBON FILM
1/6 1.2K OHM J
R164
RD-AZ752J-
R CARBON FILM
1/6 7.5K OHM J
R542
RD-AZ223J-
R CARBON FILM
1/6 22K OHM J
R177
RD-AZ562J-
R CARBON FILM
1/6 5.6K OHM J
R543
RD-AZ271J-
R CARBON FILM
1/6 270 OHM J
R190
RD-AZ221J-
R CARBON FILM
1/6 220 OHM J
R544
RD-AZ222J-
R CARBON FILM
1/6 2.2K OHM J
R191
RD-AZ331J-
R CARBON FILM
1/6 330 OHM J
R548
RD-AZ103J-
R CARBON FILM
1/6 10K OHM J
R301
RD-4Z472J-
R CARBON FILM
1/4 4.7K OHM J
R550
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
R310
RD-AZ392J-
R CARBON FILM
1/6 3.9K OHM J
R555
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
R311
RD-AZ392J-
R CARBON FILM
1/6 3.9K OHM J
R560
RD-AZ101J-
R CARBON FILM
1/6 100 OHM J
R330
RD-4Z473J-
R CARBON FILM
1/4 47K OHM J
R561
RD-AZ101J-
R CARBON FILM
1/6 100 OHM J
R331
RD-2Z201J-
R CARBON FILM
1/2 200 OHM J
R562
RD-AZ152J-
R CARBON FILM
1/6 1.5K OHM J
R333
RD-AZ222J-
R CARBON FILM
1/6 2.2K OHM J
R563
RD-AZ152J-
R CARBON FILM
1/6 1.5K OHM J
R334
RD-AZ222J-
R CARBON FILM
1/6 2.2K OHM J
R566
RD-AZ220J-
R CARBON FILM
1/6 22 OHM J
LOC
PART CODE
PART NAME
DESCRIPTION
REMARK
PART NAME
DECSCRIPTION
R340
RD-4Z334J-
R CARBON FILM
1/4 330K OHM J
R568
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
R341
RD-4Z333J-
R CARBON FILM
1/4 33K OHM J
R569
RD-AZ181J-
R CARBON FILM
1/6 180 OHM J
R350
RD-4Z272J-
R CARBON FILM
1/4 2.7K OHM J
R570
RD-AZ271J-
R CARBON FILM
1/6 270 OHM J
R351
RD-4Z272J-
R CARBON FILM
1/4 2.7K OHM J
R572
RD-AZ101J-
R CARBON FILM
1/6 100 OHM J
R370
RD-4Z159J-
R CARBON FILM
1/4 1.5 OHM J
R573
RD-AZ101J-
R CARBON FILM
1/6 100 OHM J
R394
RD-AZ272J-
R CARBON FILM
1/6 2.7K OHM J
R576
RD-AZ181J-
R CARBON FILM
1/6 180 OHM J
R395
RD-4Z394J-
R CARBON FILM
1/4 390K OHM J
R577
RD-AZ181J-
R CARBON FILM
1/6 180 OHM J
R396
RD-AZ272J-
R CARBON FILM
1/6 2.7K OHM J
R578
RD-AZ330J-
R CARBON FILM
1/6 33 OHM J
R397
RD-AZ104J-
R CARBON FILM
1/6 100K OHM J
R579
RD-AZ330J-
R CARBON FILM
1/6 33 OHM J
R401
RD-4Z272J-
R CARBON FILM
1/4 2.7K OHM J
R580
RD-AZ271J-
R CARBON FILM
1/6 270 OHM J
R402
RD-4Z220J-
R CARBON FILM
1/4 22 OHM J
R582
RD-AZ101J-
R CARBON FILM
1/6 100 OHM J
R404
RD-2Z399J-
R CARBON FILM
1/2 3.9 OHM J
R583
RD-AZ101J-
R CARBON FILM
1/6 100 OHM J
R406
RD-2Z821J-
R CARBON FILM
1/2 820 OHM J
R586
RD-AZ271J-
R CARBON FILM
1/6 270 OHM J
R420
RD-4Z682J-
R CARBON FILM
1/4 6.8K OHM J
R587
RD-AZ101J-
R CARBON FILM
1/6 100 OHM J
R490
RD-4Z101J-
R CARBON FILM
1/4 100 OHM J
R588
RD-AZ101J-
R CARBON FILM
1/6 100 OHM J
R500
RD-AZ101J-
R CARBON FILM
1/6 100 OHM J
R589
RD-AZ330J-
R CARBON FILM
1/6 33 OHM J
R501
RD-AZ101J-
R CARBON FILM
1/6 100 OHM J
R591
RD-AZ431J-
R CARBON FILM
1/6 430 OHM J
R502
RD-AZ101J-
R CARBON FILM
1/6 100 OHM J
R592
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
R503
RD-AZ101J-
R CARBON FILM
1/6 100 OHM J
R593
RD-AZ104J-
R CARBON FILM
1/6 100K OHM J
R504
RD-AZ473J-
R CARBON FILM
1/6 47K OHM J
R594
RD-AZ222J-
R CARBON FILM
1/6 2.2K OHM J
R506
RD-AZ223J-
R CARBON FILM
1/6 22K OHM J
R595
RD-AZ682J-
R CARBON FILM
1/6 6.8K OHM J
R507
RD-AZ562J-
R CARBON FILM
1/6 5.6K OHM J
R596
RD-AZ472J-
R CARBON FILM
1/6 4.7K OHM J
R508
RD-AZ562J-
R CARBON FILM
1/6 5.6K OHM J
R597
RD-AZ153J-
R CARBON FILM
1/6 15K OHM J
R509
RD-AZ472J-
R CARBON FILM
1/6 4.7K OHM J
R598
RD-AZ153J-
R CARBON FILM
1/6 15K OHM J
R511
RD-AZ133J-
R CARBON FILM
1/6 13K OHM J
R599
RD-AZ101J-
R CARBON FILM
1/6 100 OHM J
R512
RD-AZ133J-
R CARBON FILM
1/6 13K OHM J
R601
RD-AZ101J-
R CARBON FILM
1/6 100 OHM J
R513
85801065GY
WIRE COPPER
AWG22 1/0.65 TIN COATING
R602
RD-AZ104J-
R CARBON FILM
1/6 100K OHM J
R517
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
R605
RD-AZ101J-
R CARBON FILM
1/6 100 OHM J
R518
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
R606
RD-AZ101J-
R CARBON FILM
1/6 100 OHM J
R530
RD-AZ103J-
R CARBON FILM
1/6 10K OHM J
R608
RD-2Z151J-
R CARBON FILM
1/2 150 OHM J
R532
RD-AZ223J-
R CARBON FILM
1/6 22K OHM J
R609
RD-2Z151J-
R CARBON FILM
1/2 150 OHM J
R533
RD-AZ103J-
R CARBON FILM
1/6 10K OHM J
R614
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
R535
RD-AZ201J-
R CARBON FILM
1/6 200 OHM J
R615
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
R537
RD-AZ201J-
R CARBON FILM
1/6 200 OHM J
R620
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
- 74 -
REMARK
Service Manual WP-895/895F, CP885/885F, CP485F
LOC
PART CODE
PART NAME
DESCRIPTION
REMARK
LOC
PART CODE
PART NAME
DECSCRIPTION
R621
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
R913
RD-AZ101J-
R CARBON FILM
1/6 100 OHM J
R622
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
R921
RC-2Z102K-
R CARBON COMP
1/2 1K OHM K
1/6 1K OHM J
R922
RC-2Z102K-
R CARBON COMP
1/2 1K OHM K
1/6 1K OHM J
R923
RC-2Z102K-
R CARBON COMP
1/2 1K OHM K
RD-4Z472J-
R CARBON FILM
1/4 4.7K OHM J
R641
R642
RD-AZ102JRD-AZ102J-
R CARBON FILM
R CARBON FILM
R646
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
R983
R647
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
R996
RD-2Z105J-
R CARBON FILM
1/2 1M OHM J
R649
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
R997
RD-2Z102J-
R CARBON FILM
1/2 1K OHM J
R650
RD-AZ752J-
R CARBON FILM
1/6 7.5K OHM J
RA1
RD-AZ220J-
R CARBON FILM
1/6 22 OHM J
R651
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
RA10
RD-AZ101J-
R CARBON FILM
1/6 100 OHM J
R652
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
RA11
RD-AZ750J-
R CARBON FILM
1/6 75 OHM J
1/6 7.5K OHM J
RA12
RD-AZ750J-
R CARBON FILM
1/6 75 OHM J
1/6 12K OHM J
RA13
RD-AZ113J-
R CARBON FILM
1/6 11K OHM J
1/6 12K OHM J
RA14
RD-AZ750J-
R CARBON FILM
1/6 75 OHM J
R660
R661
R662
RD-AZ752JRD-AZ123JRD-AZ123J-
R CARBON FILM
R CARBON FILM
R CARBON FILM
R700
RD-2Z332J-
R CARBON FILM
1/2 3.3K OHM J
RA16
RD-AZ750J-
R CARBON FILM
1/6 75 OHM J
R709
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
RA19
RD-AZ750J-
R CARBON FILM
1/6 75 OHM J
R710
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
RA2
RD-AZ101J-
R CARBON FILM
1/6 100 OHM J
R711
RD-AZ103J-
R CARBON FILM
1/6 10K OHM J
RA29
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
R712
RD-AZ181J-
R CARBON FILM
1/6 180 OHM J
RA3
RD-AZ101J-
R CARBON FILM
1/6 100 OHM J
RD-AZ680J-
R CARBON FILM
1/6 68 OHM J
R713
RD-AZ331J-
R CARBON FILM
1/6 330 OHM J
RA32
R720
RD-AZ122J-
R CARBON FILM
1/6 1.2K OHM J
RA4
RD-AZ101J-
R CARBON FILM
1/6 100 OHM J
RD-AZ113J-
R CARBON FILM
1/6 11K OHM J
R721
RD-AZ181J-
R CARBON FILM
1/6 180 OHM J
RA44
R722
RD-AZ221J-
R CARBON FILM
1/6 220 OHM J
RA5
RD-AZ333J-
R CARBON FILM
1/6 33K OHM J
R723
RD-AZ331J-
R CARBON FILM
1/6 330 OHM J
RA6
RD-AZ750J-
R CARBON FILM
1/6 75 OHM J
R724
RD-AZ471J-
R CARBON FILM
1/6 470 OHM J
RA7
RD-AZ333J-
R CARBON FILM
1/6 33K OHM J
R805
RD-2Z100J-
R CARBON FILM
1/2 10 OHM J
RA8
RD-AZ750J-
R CARBON FILM
1/6 75 OHM J
R806
RD-2Z472J-
R CARBON FILM
1/2 4.7K OHM J
RA9
RD-AZ750J-
R CARBON FILM
1/6 75 OHM J
RD-AZ220J-
R CARBON FILM
1/6 22 OHM J
R807
RD-2Z272J-
R CARBON FILM
1/2 2.7K OHM J
RA90
R808
RD-2Z821J-
R CARBON FILM
1/2 820 OHM J
RA91
RD-AZ473J-
R CARBON FILM
1/6 47K OHM J
1/4 1K OHM J
RA92
RD-AZ223J-
R CARBON FILM
1/6 22K OHM J
R810
RD-4Z102J-
R CARBON FILM
R811
RC-2Z565KP
R CARBON COMP
1/2 5.6M OHM K
R817
RD-AZ473J-
R CARBON FILM
1/6 47K OHM J
R820
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
R821
RD-4Z102J-
R CARBON FILM
1/4 1K OHM J
R823
RD-2Z472J-
R CARBON FILM
1/2 4.7K OHM J
R829
RD-AZ103J-
R CARBON FILM
1/6 10K OHM J
R830
RD-AZ332J-
R CARBON FILM
1/6 3.3K OHM J
R841
RD-2Z470J-
R CARBON FILM
1/2 47 OHM J
R851
RD-AZ391J-
R CARBON FILM
1/6 390 OHM J
R852
RD-AZ102J-
R CARBON FILM
1/6 1K OHM J
R855
RD-4Z335J-
R CARBON FILM
1/4 3.3M OHM J
R870
RD-2Z222J-
R CARBON FILM
1/2 2.2K OHM J
R901
RD-AZ221J-
R CARBON FILM
1/6 220 OHM J
R902
RD-AZ221J-
R CARBON FILM
1/6 220 OHM J
R903
RD-AZ221J-
R CARBON FILM
1/6 220 OHM J
R910
RD-AZ101J-
R CARBON FILM
1/6 100 OHM J
R911
RD-AZ101J-
R CARBON FILM
1/6 100 OHM J
R912
RD-AZ101J-
R CARBON FILM
1/6 100 OHM J
- 75 -
REMARK
Service Manual WP-895/895F, CP885/885F, CP485F
6. Service Parts List
“ ! “Parts recommended for stock.
(TW28D11)
“ R “Safety critical componen, Replace only with genuine Daewoo safety parts.
✐ CAUTION In
: this Service Manual, some parts can be changed for improving their
performance without notice in the parts list. So, if you need the latest parts
information, please refer to PPL(Parts Price List)in Service information
Center(http://svc.dwe.co.kr)
LOC
10000
11000
12000
13000
14000
20000
21000
22000
23000
24000
25000
26000
27000
30000
31100
32000
32100
34000
35000
35100
36500
37500
31000
00010
00020
40000
41000
41100
42000
43000
44000
450DN
450UP
50000
51000
51100
52000
60000
62000
63000
64000
61000
61100
61200
61300
70000
71000
73000
75000
ZZ290
10
40
20
30
50
60
C106
C118
C315
C402
C408
C409
C415
C430
C431
C440
C499
C604
C801
PART CODE
PTACPW-SWX
48586A1617
48B4846G22
4850Q00910
4858211400F
PTPKCP28W8
4858058900
4858197300UP
4858197300DN
4858216202F-02
485580B001F
4850075990F2
4850075066F3
PTFMSJ28W9
4855617401
48548628-050792
4856716000
4855060500
48519470AS
4857923300
7172401212
7172401212
PTFMSJ28W9F
48520818-33
485SV128BP
PTCRT-28WFVI
4859635860
4850706057
4851902110
58G0000159
4856215402
4856015820
4856015820
PTSPSUBM27
4858311110
4850704S30
4858311110
PTMPMSWF81P
4859906310
4856818300
4856812001
PTMPMSWF80PW
PSMPMSWF80PW
4859722430
2193011101
PTBCSH28W5
48521589-22
7172401612
4855415800
PTMPMSF28W8ZP
2193100801
2291050314
2193011101
2291050617P
2291140501
2291051001
CEXF1H221V
CMXL1J474J
CEXF2A470V
CMYH3C133J
CMYE2G514J
CMYE2G394J
CEXF2E479V
CCXB3D681K
CMXM2A103J
CMXE2G273J
CEYD1H689W
CEXF1E102V
CL1JB3474K
PART NAME
ACCESSORY AS
INSTRUC. MANUAL
REMOTE CONTROL
BATTERY
POLY BAG
PACKING AS
CARTONBOX
PAD UP
PAD DOWN
POLY BAG 25''-28''
STICKER
TAPE CLOSING
TAPE CLOSING
FRONT MASK AS
MARK BRAND
BUTTON POWER
SPRING
DECO CTRL
DOOR AS
DOOR LOCK
SCREW TAPPTITE
SCREW TAPPTITE
FRONT MASK FINI
FRONT MASK
PAINT
CRT AS
CRT 28'' WIDE FLAT
CONN AS
CRT GROUND AS
DEGAUSSING COIL
WASHER RUBBER
SCREW CRT FIX
SCREW CRT FIX
SPEAKER AS
SPEAKER
CONN AS
SPEAKER
PCB AS
POWER CORD AS
CLAMP WIRE
TIE CABLE
PCB WITH TUNER
PCB W/O TUNER
TUNER VARACTOR
SOLDER WIRE
BACK COVER AS
BACK COVER
SCREW TAPPTITE
SPEC PLATE
PCB MAIN MANUAL AS
SOLDER BAR
FLUX SOLVENT
SOLDER WIRE
FLUX SOLDER
WAX COVER
FLUX KILLER
C ELECTRO
C MYLAR
C ELECTRO
C MYLAR
C MYLAR
C MYLAR
C ELECTRO
C CERA
C MYLAR
C MYLAR
C ELECTRO
C ELECTRO
C LINE ACROSS
DESCRIPTION
DWX-_____
ALL
R-46G22
"AAA 1,5V (SUPERGARD-PTE)"
M/N 350MM BOBINE
28W8
28W5/28W8/W9
28W8/28W9
28W8/28W9
PE COEXTRUDE 1650X1270
115 X 285
TAPE ( 75 X 990M ) 3739
TAPE ( 75 X 66M ) 3739
28W9 M.SILVER
AL SILVER (28B1)
28W9 M.SILVER
SWPA PIE0.5
28W9 PVC T0.25(LPP)
28W9 DOOR + DECO SENSOR
"LA701 (KIFCO),MODEL WITH DOOR"
TT2 TRS 4X12 MFZN BK
TT2 TRS 4X12 MFZN BK
28W9 M.SILVER
28W9 M.SILVER
L8341307
28'' 16/9 FLAT 50HZ
W66EJY011X101
"ODY-2019 (14""-20""-21""-25""-28"")"
28'' 16/9
DC-28FW2 (WP-895F DWF)
CR T=2MM
SWRM+SK5 L=35
SWRM+SK5 L=35
CP-776
"12W 8 OHM SP-58126F 25""28"" X2"
YH025-03+35098+ULW=700
"12W 8 OHM SP-58126F 25""28"" X2"
DWF-28__ZZP-SUM
14-LO+H03VVH2+HOU=2200 UK
PH-WL-5034
"NYLON66 DA100,14,20,21,25,28"
DWF-28__ZZP
DWF-28__ZZP
UV1316/AIG-3
"RS 60-1.2 1.6A PROD,APF,ROULX"
28W5
28W5
TT2 TRS 4X16MFZN BK
"150 ART P/E FILM TVCR,HIT"
DWF-28W8ZP
SN:PB=63:37 3PI(NO FLUX)
IM-1000
RS 60-1.2 1.6A
CF-329D
60G/PC
KFT-7
50V RSS 220MF (10X16) TP
63V 0.47MF MKT
100V RSS 47MF (10X16) TP
1.6KV 0.013MF J
400V 0.51MF J (PL)
400V PU 0.39MF J
250V RSS 4.7MF (10X16)TP
2KV B 680PF K (TAPPING)
100V 0.01MF J (TP)
400V PU 0.027MF J (T
50V RHD 6.8MF (16X35.5)
25V RSS 1000MF (13X20) TP
AC250V 0.47MF U/C/SNDF/SV
REMARK
R
!
R
!
R
R
!
LOC
C805
C811
C812
C813
C814
C820
C823
C832
C840
C841
C861
C866
C900
C910
C997
D403
D404
D820
D860
F801
G900
I101
I301
I301A
I301B
I501
I601
I602
I602A
I602B
I702
I703
I801
I801A
I801B
I804
I806
I810
I820
I822
I823
I901
I901A
I901B
JP01
JPA1
JPA2
JPA3
JPA4
L150
L380
L381
L802
LF801
M351
P401
P402
P501
P601
P801
P802
P903
Q401
Q401A
Q401B
R398
R399
R415
R450
R801
R802
!
- 76 -
PART CODE
CEYN2G181P
CCYR3D681K
CH1AFE472M
CEXF2E101V
CEYF2E470V
CCYR3A471K
CEXF1E102V
CEXF1E102V
CEXF1C222V
CEXF1C332V
CEXF1E102C
CCYR3A471K
CCXB3D102K
CEXF2E479V
CEXF2E100V
DBY228---DBYW76---DBYW76---DBYW76---5FSCB4022R
4SG0D00103
1TDA4470M1TDA8358J4857028227
7174301011
1DW3834AE1
1MSP3410G1TDA8946J4857028215
7174301011
1AT24C16PC
1TSOP1238W
1STRF66544857027701
7174300811
1KP1010C-1SE130N--TX0202DA-1KA7805--1KA7808--1KA7805--1TDA6107Q4857031100
7174300811
4859102130
4859200401
4859200401
4859108450
4859106740
58E0000041
58C0000120
58C0000120
58C9430599
5PLF24A1-4858900002
4850706N08
4859240120
4850705N14
4859231720
4859287320
4859242220
4859238620
T2SD1880-4857024500
7174300811
RF01Y828JA
RS02Y569JS
RS02Y102JS
RS02Y223JS
DPC7R0M290
RS02Y753JS
PART NAME
C ELECTRO
C CERA
C CERA AC
C ELECTRO
C ELECTRO
C CERA
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C CERA
C CERA
C ELECTRO
C ELECTRO
DIODE
DIODE
DIODE
DIODE
FUSE CERA
SPARK GAP
IC IF
IC VERTICAL
HEAT SINK
SCREW TAPPTITE
IC MICOM
IC SOUND PROCESSOR
IC AUDIO
HEAT SINK
SCREW TAPPTITE
IC MEMORY
IC PREAMP
IC SMPS
HEAT SINK
SCREW TAPPTITE
IC PHOTO COUPLER
IC
THYRISTOR
IC REGULATOR
IC REGULATOR
IC REGULATOR
IC VIDEO
HEAT SINK
SCREW TAPPTITE
JACK EARPHONE
SOCKET RGB
SOCKET RGB
JACK PIN BOARD
SVHS JACK
COIL AFT
COIL CHOKE
COIL CHOKE
COIL CHOKE
FILTER LINE
HOLDER LED AS
CONNECTOR
CONN WAFER
CONNECTOR
CONN WAFER
CONN WAFER
CONN WAFER
CONN WAFER
TR
HEAT SINK
SCREW TAPPTITE
R FUSIBLE
R M-OXIDE FILM
R M-OXIDE FILM
R M-OXIDE FILM
POSISTOR
R M-OXIDE FILM
DESCRIPTION
400V LHS 180MF (25X35)
2KV R 680PF K 125C
4KV 4700PF M KX DE1610
250V RSS 100MF 18X35.5
250V RSS 47MF (16X25
1KV 470PF K 125C
25V RSS 1000MF (13X20) TP
25V RSS 1000MF (13X20) TP
16V RSS 2200MF(13X25)TP
16V RSS 3300MF
25V RUS 1000MF 13X20 TP
1KV 470PF K 125C
2KV B 1000 PF K (TAPPING)
250V RSS 4.7MF (10X16)TP
250V RSS 10MF (10X20) TP
BY228
BYW76
BYW76
BYW76
SEMKO F4AH 4A 250V MF51
S-23 900V-1.5KV
TDA4470-M
TDA8358J
AL EX ANODIZING
TT2 RND 3X10 MFZN
DW3834A-AE1
MSP3410G
TDA8946J
AL EX NO ANODOZING
TT2 RND 3X10 MFZN
AT24C16-10PC
TSOP1238WI1
STR-F6654
AL EX
TT2 RND 3X8 MFZN
KP-1010C
SE130N
X0202DA
KA7805
KA7808
KA7805
TDA6107Q
A1050P-H24 T2.0
TT2 RND 3X8 MFZN
YSC-1537
SR-21A1 (ANGLE TYPE)
SR-21A1 (ANGLE TYPE)
YSC03P-4120-14A
PH-SJ-9505A
TRF-A005
CH-100Q
CH-100Q
AZ-9004Y(94MH)
LF-24A1
LH-3P
6PIN 500MM BOARD IN TYPE
YFW500-06
BIC-05T-25T+ULW=500
YW025-04
MKS2822 (LOMAX NEW TYPE)
YFW800-02
YPW500-02
2SD1880
AL EX
TT2 RND 3X8 MFZN
1W 0.82 OHM J A
2W 5.6 OHM J SMALL
2W 1K OHM J SMALL
2W 22K OHM J SMALL
96709 (PHILIPS)
2W 75K OHM J SMALL
REMARK
!
!
R
R
R
R
R
R
R
!
R
R
R
R
!
Service Manual WP-895/895F, CP885/885F, CP485F
LOC
R803
R804
R819
R850
R906
SCT1
SF1
SF2
SW801
T401
T402
T801
U100
X501
X601
Z153
ZZ200
E001
E002
E003
E004
E005
E006
E007
E008
E011
E012
E013
E014
E015
E016
E017
E018
E021
E022
E023
E024
E025
E026
E027
E028
E029
E030
E031
E034
E035
E038
E1
E2
E3
E36
E37
E4
E5
ZZ200
C102
C110
C117
C121
C122
C152
C153
C156
C157
C158
C164
C301
C305
C313
C320
C340
C341
C350
C351
C370
C401
C412
C418
C420
C424
C502
C504
PART CODE
RS02Y473JS
RF02Y228KRX10T339JRS02Y229JS
RF01Y109JA
4859303530
5PK3953M-5PK9650M-5S40101143
50D19A1--13625018-50M4936B24859722430
5XE20R250E
5XE18R432E
5PYXT5R5MB
PTMPJBF28W8ZP
4856310600
4856310600
4856310600
4856310600
4856310300
4856310300
4856310300
4856310300
4856310300
4856310600
4856310600
4856310600
4856310600
4856310600
4856310600
4856310300
4856310600
4856310600
4856310300
4856310300
4856310600
4856310600
4856310600
4856310600
4856310600
4856310600
4856310300
4856310300
4856310300
4856310600
4856310300
4856310300
4856310300
4856310600
4856310600
4856310300
4856310300
PTMPJRF28W8ZP
CEXF1E470V
CXCH1H150J
CEXF1H229V
CEXF1H100V
CEXF1E100V
CEXF1E100V
CEXF1H229V
CBXF1H104Z
CEXF1E100V
CBXF1H104Z
CEXF1E470V
CMXM2A224J
CEXF1E221V
CMXM2A104J
CBXF1H104Z
CMXM2A683J
CCXB1H102K
CCXF1H223Z
CCXF1H223Z
CCXF1H473Z
CEXF1H101V
CEXF2C339V
CCXB1H102K
CCXB2H222K
CMXM2A333J
CEXF1E101V
CEXF1E470V
PART NAME
R M-OXIDE FILM
R FUSIBLE
R CEMENT
R M-OXIDE FILM
R FUSIBLE
SOCKET CRT
FILTER SAW
FILTER SAW
SW PUSH
TRANS DRIVE
FBT
TRANS SMPS
TUNER VARACTOR
CRYSTAL QUARTZ
CRYSTAL QUARTZ
FILTER CERA
PCB MAIN EYE LET AS
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
PCB MAIN RADIAL AS
C ELECTRO
C CERA
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C CERA SEMI
C ELECTRO
C CERA SEMI
C ELECTRO
C MYLAR
C ELECTRO
C MYLAR
C CERA SEMI
C MYLAR
C CERA
C CERA
C CERA
C CERA
C ELECTRO
C ELECTRO
C CERA
C CERA
C MYLAR
C ELECTRO
C ELECTRO
DESCRIPTION
2W 47K OHM J SMALL
2W 0.22 OHM K
10W 3.3 OHM J TRIPOD
2W 2.2 OHM J SMALL
1W 1 OHM J A CURVE
PCS629-03C
K3953M
K9650M
PS3-22SP (P.C.B)
TD-19A1
1362.5018
2094.0057B
UV1316/AIG-3
HC-49/U 20.2500MHZ 30PPM
HC-49/U 18.43200MHZ 30PPM
XT5.5MB
DWF-28W8ZZP
BSR 2.3(R2.3)
BSR 2.3(R2.3)
BSR 2.3(R2.3)
BSR 2.3(R2.3)
BSR T0.2 (R1.6)
BSR T0.2 (R1.6)
BSR T0.2 (R1.6)
BSR T0.2 (R1.6)
BSR T0.2 (R1.6)
BSR 2.3(R2.3)
BSR 2.3(R2.3)
BSR 2.3(R2.3)
BSR 2.3(R2.3)
BSR 2.3(R2.3)
BSR 2.3(R2.3)
BSR T0.2 (R1.6)
BSR 2.3(R2.3)
BSR 2.3(R2.3)
BSR T0.2 (R1.6)
BSR T0.2 (R1.6)
BSR 2.3(R2.3)
BSR 2.3(R2.3)
BSR 2.3(R2.3)
BSR 2.3(R2.3)
BSR 2.3(R2.3)
BSR 2.3(R2.3)
BSR T0.2 (R1.6)
BSR T0.2 (R1.6)
BSR T0.2 (R1.6)
BSR 2.3(R2.3)
BSR T0.2 (R1.6)
BSR T0.2 (R1.6)
BSR T0.2 (R1.6)
BSR 2.3(R2.3)
BSR 2.3(R2.3)
BSR T0.2 (R1.6)
BSR T0.2 (R1.6)
DWF-28W8ZZP
25V RSS 47MF (5X11) TP
50V CH 15PF J (TAPPING)
50V RSS 2.2MF (5X11) TP
50V RSS 10MF (5X11) TP
25V RSS 10MF TP
25V RSS 10MF TP
50V RSS 2.2MF (5X11) TP
50V F 0.1MF Z (TAPPING)
25V RSS 10MF TP
50V F 0.1MF Z (TAPPING)
25V RSS 47MF (5X11) TP
100V 0.22MF J BULK
25V RSS 220MF (8X11.5) TP
100V 0.1MF J TP
50V F 0.1MF Z (TAPPING)
100V 0.068MF J TP
50V B 1000PF K (TAPPING)
50V F 0.022MF Z (TAPPING)
50V F 0.022MF Z (TAPPING)
50V F 0.047MF Z (TAPPING)
50V RSS 100MF (8*11.5) TP
160V RSS 3.3MF (8X16) TP
50V B 1000PF K (TAPPING)
500V B 2200PF K (TAPPING)
100V 0.033MF J TP
25V RSS 100MF (6.3X11) TP
25V RSS 47MF (5X11) TP
REMARK
R
R
!
!
!
R
LOC
C508
C510
C511
C519
C520
C521
C522
C525
C528
C529
C530
C546
C547
C549
C553
C597
C602
C605
C608
C610
C611
C612
C613
C614
C615
C616
C617
C622
C623
C624
C625
C626
C629
C630
C634
C635
C636
C641
C642
C660
C661
C662
C665
C666
C667
C668
C669
C690
C691
C770
C803
C804
C806
C807
C808
C809
C821
C824
C831
C835
C844
C850
C863
C888
C902
F801A
F801B
L101
Q103
Q104
Q120
Q150
Q151
Q333
Q334
Q402
Q510
Q511
Q542
Q543
Q544
Q550
- 77 -
PART CODE
CEXF1H220V
CCXF1H473Z
CEXF1E100V
CEXF1H109V
CEXF1H109V
CEXF1H109V
CEXF1H109V
CEXF1H220V
CCXF1H223Z
CCXF1H223Z
CCXF1H223Z
CEXF1H339V
CBXF1H104Z
CEXF1H229V
CEXF1E101V
CEXF1H220V
CEXF1E221V
CEXF1E470V
CEXF1E100V
CEXF1E100V
CEXF1H339V
CEXF1H109V
CEXF1H109V
CEXF1H109V
CEXF1H109V
CEXF1E100V
CBXF1H104Z
CXCH1H680J
CEXF1H109V
CEXF1H109V
CEXF1E101V
CEXF1E101V
CBXF1H104Z
CEXF1E470V
CEXF1E100V
CCXB1H102K
CEXF1E470V
CEXF1E101V
CEXF1E101V
CEXF1C100A
CMXM2A224J
CMXM2A224J
CCXB1H472K
CBXF1H104Z
CCXB1H472K
CMXM2A224J
CMXM2A224J
CEXF1H479V
CEXF1H479V
CEXF1C101V
CCXF3A472Z
CCXF3A472Z
CEXF1H330V
CCXF1H473Z
CEXF1H479V
CCXB1H102K
CCXB1H102K
CCXB3A471K
CCXB3A471K
CEXF1E470V
CEXF1E101V
CCXB1H821K
CEXF1E101V
CEXF1C470V
CMXL2E104K
4857415001
4857415001
5CPX479K-T2SC5343YT2SC5343YT2SC5343YT2SC5343YT2SC5343YT2SC5343YT2SC5343YT2SD1207TT2SC5343YT2SC5343YT2SA1980YT2SA1980YT2SA1980YT2SC5343Y-
PART NAME
C ELECTRO
C CERA
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C CERA
C CERA
C CERA
C ELECTRO
C CERA SEMI
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C CERA SEMI
C CERA
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C CERA SEMI
C ELECTRO
C ELECTRO
C CERA
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C MYLAR
C MYLAR
C CERA
C CERA SEMI
C CERA
C MYLAR
C MYLAR
C ELECTRO
C ELECTRO
C ELECTRO
C CERA
C CERA
C ELECTRO
C CERA
C ELECTRO
C CERA
C CERA
C CERA
C CERA
C ELECTRO
C ELECTRO
C CERA
C ELECTRO
C ELECTRO
C MYLAR
CLIP FUSE
CLIP FUSE
COIL PEAKING
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
DESCRIPTION
50V RSS 22MF (5X11) TP
50V F 0.047MF Z (TAPPING)
25V RSS 10MF TP
50V RSS 1MF (5X11) TP
50V RSS 1MF (5X11) TP
50V RSS 1MF (5X11) TP
50V RSS 1MF (5X11) TP
50V RSS 22MF (5X11) TP
50V F 0.022MF Z (TAPPING)
50V F 0.022MF Z (TAPPING)
50V F 0.022MF Z (TAPPING)
50V RSS 3.3MF (5X11) TP
50V F 0.1MF Z (TAPPING)
50V RSS 2.2MF (5X11) TP
25V RSS 100MF (6.3X11) TP
50V RSS 22MF (5X11) TP
25V RSS 220MF (8X11.5) TP
25V RSS 47MF (5X11) TP
25V RSS 10MF TP
25V RSS 10MF TP
50V RSS 3.3MF (5X11) TP
50V RSS 1MF (5X11) TP
50V RSS 1MF (5X11) TP
50V RSS 1MF (5X11) TP
50V RSS 1MF (5X11) TP
25V RSS 10MF TP
50V F 0.1MF Z (TAPPING)
50V CH 68PF J (TAPPING)
50V RSS 1MF (5X11) TP
50V RSS 1MF (5X11) TP
25V RSS 100MF (6.3X11) TP
25V RSS 100MF (6.3X11) TP
50V F 0.1MF Z (TAPPING)
25V RSS 47MF (5X11) TP
25V RSS 10MF TP
50V B 1000PF K (TAPPING)
25V RSS 47MF (5X11) TP
25V RSS 100MF (6.3X11) TP
25V RSS 100MF (6.3X11) TP
16V RSM 10MF 5X7
100V 0.22MF J BULK
100V 0.22MF J BULK
50V B 4700PF K (TAPPING)
50V F 0.1MF Z (TAPPING)
50V B 4700PF K (TAPPING)
100V 0.22MF J BULK
100V 0.22MF J BULK
50V RSS 4.7MF (5*11) TP
50V RSS 4.7MF (5*11) TP
16V RSS 100MF (6.3X11) TP
1KV F 4700PF Z (T)
1KV F 4700PF Z (T)
50V RSS 33MF (6.3X11) TP
50V F 0.047MF Z (TAPPING)
50V RSS 4.7MF (5*11) TP
50V B 1000PF K (TAPPING)
50V B 1000PF K (TAPPING)
1KV B 470PF K (T)
1KV B 470PF K (T)
25V RSS 47MF (5X11) TP
25V RSS 100MF (6.3X11) TP
50V B 820PF K (TAPPING)
25V RSS 100MF (6.3X11) TP
16V RSS 47MF (5X11) TP
250V 0.1MF K MEU TP
PFC5000-0702
PFC5000-0702
4.7UH K RADIAL
2SC5343Y
2SC5343Y
2SC5343Y
2SC5343Y
2SC5343Y
2SC5343Y
2SC5343Y
2SD1207-T (TAPPING)
2SC5343Y
2SC5343Y
2SA1980Y
2SA1980Y
2SA1980Y
2SC5343Y
REMARK
Service Manual WP-895/895F, CP885/885F, CP485F
LOC
Q599
Q601
Q701
Q702
Q807
Q808
Q809
Q810
Q811
Q850
Q851
QA1
RB10
SW700
SW701
SW702
SW703
SW704
Z601
Z602
Z603
Z604
Z605
Z606
Z607
Z608
ZZ200
20
10
A001
C101
C103
C104
C116
C119
C120
C151
C154
C160
C161
C163
C500
C501
C503
C505
C506
C507
C509
C512
C516
C526
C527
C534
C535
C536
C548
C554
C560
C561
C568
C571
C578
C579
C581
C585
C589
C590
C591
C601
C603
C620
C621
C631
C650
C830
CA1
CA10
CA13
CA14
CA15
CA16
CA17
PART CODE
T2SA1980YT2SA1980YT2SC5343YT2SA1980YT2SC5343YT2SC5343YT2SC5343YT2SC5343YT2SC5343YT2SC5343YT2SC5343YT2SC5343YRV5426103P
5S50101090
5S50101090
5S50101090
5S50101090
5S50101090
5PXF1B471M
5PXF1B471M
5PXF1B471M
5PXF1B471M
5PXF1B471M
5PXF1B471M
5PXF1B471M
5PXF1B471M
PTMPJAF28W8ZP
2TM10006LB
2TM14006LB
4859805193
CCZB1H101K
CCZB1H102K
CCZB1H102K
CBZF1H104Z
CCZF1H103Z
CCZB1H102K
CCZF1H103Z
CCZF1H103Z
CCZF1H103Z
CZSL1H220J
CCZF1H103Z
CCZF1H103Z
CCZF1H103Z
CBZF1H104Z
CCZB1H102K
CBZF1H104Z
CCZF1H103Z
CCZF1H103Z
CCZF1H103Z
CCZB1H102K
CBZF1H104Z
CCZB1H102K
CCZB1H333K
CCZB1H333K
CCZB1H333K
CBZF1H104Z
CBZF1H104Z
CCZB1H101K
CCZB1H101K
CBZF1H104Z
CCZB1H101K
CCZB1H221K
CCZB1H221K
CCZB1H101K
CCZB1H101K
CCZB1H221K
CZCH1H309C
CZCH1H309C
CCZB1H472K
CCZB1H472K
CZCH1H309C
CZCH1H309C
CBZF1H104Z
CZSL1H680J
CBZF1H104Z
CCZB1H101K
CCZB1H102K
CCZB1H471K
CCZB1H471K
CCZB1H471K
CCZB1H471K
CCZB1H471K
PART NAME
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
R SEMI FIXED
SW TACT
SW TACT
SW TACT
SW TACT
SW TACT
FILTER EMI
FILTER EMI
FILTER EMI
FILTER EMI
FILTER EMI
FILTER EMI
FILTER EMI
FILTER EMI
PCB MAIN AXIAL AS
TAPE MASKING
TAPE MASKING
PCB MAIN
C CERA
C CERA
C CERA
C CERA SEMI
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA SEMI
C CERA
C CERA SEMI
C CERA
C CERA
C CERA
C CERA
C CERA SEMI
C CERA
C CERA
C CERA
C CERA
C CERA SEMI
C CERA SEMI
C CERA
C CERA
C CERA SEMI
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA SEMI
C CERA
C CERA SEMI
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
DESCRIPTION
2SA1980Y
2SA1980Y
2SC5343Y
2SA1980Y
2SC5343Y
2SC5343Y
2SC5343Y
2SC5343Y
2SC5343Y
2SC5343Y
2SC5343Y
2SC5343Y
RH0638C 10K OHM B
SKHV17910A
SKHV17910A
SKHV17910A
SKHV17910A
SKHV17910A
CFI 06 B 1H 470PF
CFI 06 B 1H 470PF
CFI 06 B 1H 470PF
CFI 06 B 1H 470PF
CFI 06 B 1H 470PF
CFI 06 B 1H 470PF
CFI 06 B 1H 470PF
CFI 06 B 1H 470PF
DWF-28W8ZZP
3M #232-MAP-C 6.2X2000M
3M #232 6.0X2000M
WP-895F
50V B 100PF K (AXIAL)
50V B 1000PF K (AXIAL)
50V B 1000PF K (AXIAL)
50V F 0.1MF Z (AXIAL)
50V F 0.01MF Z
50V B 1000PF K (AXIAL)
50V F 0.01MF Z
50V F 0.01MF Z
50V F 0.01MF Z
50V SL 22PF J (AXIAL)
50V F 0.01MF Z
50V F 0.01MF Z
50V F 0.01MF Z
50V F 0.1MF Z (AXIAL)
50V B 1000PF K (AXIAL)
50V F 0.1MF Z (AXIAL)
50V F 0.01MF Z
50V F 0.01MF Z
50V F 0.01MF Z
50V B 1000PF K (AXIAL)
50V F 0.1MF Z (AXIAL)
50V B 1000PF K (AXIAL)
50V B 0.033MF K (AXIAL)
50V B 0.033MF K (AXIAL)
50V B 0.033MF K (AXIAL)
50V F 0.1MF Z (AXIAL)
50V F 0.1MF Z (AXIAL)
50V B 100PF K (AXIAL)
50V B 100PF K (AXIAL)
50V F 0.1MF Z (AXIAL)
50V B 100PF K (AXIAL)
50V B 220PF K (AXIAL)
50V B 220PF K (AXIAL)
50V B 100PF K (AXIAL)
50V B 100PF K (AXIAL)
50V B 220PF K (AXIAL)
50V CH 3PF C (AXIAL)
50V CH 3PF C (AXIAL)
50V B 4700PF K (AXIAL)
50V B 4700PF K (AXIAL)
50V CH 3PF C (AXIAL)
50V CH 3PF C (AXIAL)
50V F 0.1MF Z (AXIAL)
50V SL 68PF J (AXIAL)
50V F 0.1MF Z (AXIAL)
50V B 100PF K (AXIAL)
50V B 1000PF K (AXIAL)
50V B 470PF K (AXIAL)
50V B 470PF K (AXIAL)
50V B 470PF K (AXIAL)
50V B 470PF K (AXIAL)
50V B 470PF K (AXIAL)
REMARK
LOC
CA18
CA19
CA2
CA20
CA3
CA4
CA7
CA8
D100
D101
D103
D313
D360
D361
D362
D367
D405
D407
D408
D410
D411
D450
D520
D521
D533
D534
D537
D550
D551
D591
D597
D598
D599
D601
D602
D603
D801
D802
D803
D804
D805
D806
D808
D809
D811
D821
D824
D825
D830
D831
D840
D841
D850
D911
D912
D913
D997
DA10
DA11
DA15
DA16
DA20
DA27
DA3
DA32
DA6
DA7
DA8
DA9
J001
J002
J003
J005
J006
J007
J008
J009
J015
J016
J018
J019
J022
- 78 -
PART CODE
CCZB1H471K
CCZB1H222K
CCZB1H101K
CCZB1H222K
CCZB1H101K
CCZB1H102K
CCZB1H471K
CCZB1H471K
DUZ33B---DBAT85---D1SS85TA-DBYW36---DTZX22C--DUZ33B---DUZ33B---DUZ33B---DBYW36---DBYW36---DBYW36---D1N4004S-D1N4004S-DBYW36---D1N4148--D1N4148--D1N4148--D1N4148--D1N4148--D1N4148--D1N4148--DUZ2R7B--D1N4148--D1N4148--DTZX5V6B-D1N4148--D1N4148--85801065GY
DBYT51J--DBYT51J--DBYT51J--DBYT51J--DBYW36---DBYW36---DBYW36---DBYW36---DTZX6V2--DBYW36---D1N4148--D1N4148--DBYW36---DBYW36---D1N4148--D1N4148--DUZ2R7B--DBAV21---DBAV21---DBAV21---DBYT51J--DTZX5V6B-DTZX5V6B-DTZX5V6B-DTZX5V6B-DTZX5V6B-DTZX5V6B-DTZX5V1B-DTZX5V6B-DTZX5V6B-DTZX5V1B-DTZX5V6B-DTZX5V6B-85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
PART NAME
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
DIODE ZENER
DIODE
DIODE
DIODE
DIODE ZENER
DIODE ZENER
DIODE ZENER
DIODE ZENER
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE ZENER
DIODE
DIODE
DIODE ZENER
DIODE
DIODE
WIRE COPPER
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE ZENER
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE ZENER
DIODE
DIODE
DIODE
DIODE
DIODE ZENER
DIODE ZENER
DIODE ZENER
DIODE ZENER
DIODE ZENER
DIODE ZENER
DIODE ZENER
DIODE ZENER
DIODE ZENER
DIODE ZENER
DIODE ZENER
DIODE ZENER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
DESCRIPTION
50V B 470PF K (AXIAL)
50V B 2200PF K (AXIAL)
50V B 100PF K (AXIAL)
50V B 2200PF K (AXIAL)
50V B 100PF K (AXIAL)
50V B 1000PF K (AXIAL)
50V B 470PF K (AXIAL)
50V B 470PF K (AXIAL)
UZ-33B
BAT85 (TAPPING)
1SS85TA
BYW36 (TAPPING)
TZX22C (TAPPING)
UZ-33B
UZ-33B
UZ-33B
BYW36 (TAPPING)
BYW36 (TAPPING)
BYW36 (TAPPING)
1N4004S
1N4004S
BYW36 (TAPPING)
1N4148 (TAPPING)
1N4148 (TAPPING)
1N4148 (TAPPING)
1N4148 (TAPPING)
1N4148 (TAPPING)
1N4148 (TAPPING)
1N4148 (TAPPING)
UZ-2.7B
1N4148 (TAPPING)
1N4148 (TAPPING)
TZX5V6B (TAPPING)
1N4148 (TAPPING)
1N4148 (TAPPING)
AWG22 1/0.65 TIN COATING
BYT51J (TAPPING)
BYT51J (TAPPING)
BYT51J (TAPPING)
BYT51J (TAPPING)
BYW36 (TAPPING)
BYW36 (TAPPING)
BYW36 (TAPPING)
BYW36 (TAPPING)
TZX6V2B (TAPPING)
BYW36 (TAPPING)
1N4148 (TAPPING)
1N4148 (TAPPING)
BYW36 (TAPPING)
BYW36 (TAPPING)
1N4148 (TAPPING)
1N4148 (TAPPING)
UZ-2.7B
BAV21 (TAPPING)
BAV21 (TAPPING)
BAV21 (TAPPING)
BYT51J (TAPPING)
TZX5V6B (TAPPING)
TZX5V6B (TAPPING)
TZX5V6B (TAPPING)
TZX5V6B (TAPPING)
TZX5V6B (TAPPING)
TZX5V6B (TAPPING)
TZX5V1B (TAPPING)
TZX5V6B (TAPPING)
TZX5V6B (TAPPING)
TZX5V1B (TAPPING)
TZX5V6B (TAPPING)
TZX5V6B (TAPPING)
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
REMARK
Service Manual WP-895/895F, CP885/885F, CP485F
LOC
J023
J024
J025
J036
J038
J046
J047
J053
J054
J056
J057
J058
J061
J065
J070
J072
J073
J075
J076
J079
J080
J082
J088
J100
J101
J120
J123
J124
J153
J166
J234
J801
J802
J803
J826
J827
J828
J829
J833
J835
J836
J840
J841
J844
J845
J846
J853
J858
J859
J860
J865
J873
J874
J876
J878
J879
J880
J881
J883
J885
J887
J888
J889
J891
J896
J903
J909
J912
J914
J915
J916
J917
J918
J919
J920
J921
J924
J925
J926
L105
L153
L501
PART CODE
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
5CPZ479K02
5CPZ120K02
5CPZ479K02
PART NAME
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
COIL PEAKING
COIL PEAKING
COIL PEAKING
DESCRIPTION
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
4.7UH 3.5MM K (LAL02TB)
12UH 3.5MM K (LAL02TB)
4.7UH 3.5MM K (LAL02TB)
REMARK
LOC
L502
L503
L504
L601
L602
L605
L650
L801
LA1
LA2
LA3
LA4
R101
R103
R104
R105
R106
R107
R110
R111
R116
R117
R118
R120
R131
R151
R152
R153
R154
R155
R160
R161
R162
R163
R164
R177
R190
R191
R301
R310
R311
R330
R331
R333
R334
R340
R341
R350
R351
R370
R394
R395
R396
R397
R401
R402
R404
R406
R420
R444
R490
R500
R501
R502
R503
R504
R506
R507
R508
R509
R511
R512
R513
R517
R518
R530
R532
R533
R535
R537
R540
R541
- 79 -
PART CODE
5CPZ479K02
5CPZ479K02
5CPZ479K02
5CPZ479K02
5CPZ479K02
5CPZ479K02
5MC0000100
5MC0000100
5CPZ100K04
5CPZ100K04
5CPZ100K04
5CPZ100K04
RD-AZ222JRD-AZ123JRD-AZ104JRD-AZ272JRD-AZ561JRD-AZ561JRD-AZ682JRD-AZ222JRD-AZ682JRD-AZ682JRD-AZ151JRD-AZ101JRD-AZ472JRD-AZ102JRD-AZ271JRD-AZ470JRD-AZ470JRD-AZ751JRD-AZ472JRD-AZ102JRD-AZ153JRD-AZ752JRD-AZ752JRD-AZ562JRD-AZ221JRD-AZ331JRD-4Z472JRD-AZ392JRD-AZ392JRD-4Z473JRD-2Z201JRD-AZ222JRD-AZ222JRD-4Z334JRD-4Z333JRD-4Z272JRD-4Z272JRD-4Z159JRD-AZ272JRD-4Z394JRD-AZ272JRD-AZ104JRD-4Z272JRD-4Z220JRD-2Z399JRD-2Z821JRD-2Z152J85801065GY
RD-4Z101JRD-AZ101JRD-AZ101JRD-AZ101JRD-AZ101JRD-AZ473JRD-AZ223JRD-AZ562JRD-AZ562JRD-AZ472JRD-AZ133JRD-AZ133J85801065GY
RD-AZ102JRD-AZ102JRD-AZ103JRD-AZ223JRD-AZ103JRD-AZ201JRD-AZ201JRD-AZ101JRD-AZ122J-
PART NAME
COIL PEAKING
COIL PEAKING
COIL PEAKING
COIL PEAKING
COIL PEAKING
COIL PEAKING
COIL BEAD
COIL BEAD
COIL PEAKING
COIL PEAKING
COIL PEAKING
COIL PEAKING
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
WIRE COPPER
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
WIRE COPPER
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
DESCRIPTION
4.7UH 3.5MM K (LAL02TB)
4.7UH 3.5MM K (LAL02TB)
4.7UH 3.5MM K (LAL02TB)
4.7UH 3.5MM K (LAL02TB)
4.7UH 3.5MM K (LAL02TB)
4.7UH 3.5MM K (LAL02TB)
MD-5 (HC-3550)
MD-5 (HC-3550)
10UH 10.5MM K (LAL04TB)
10UH 10.5MM K (LAL04TB)
10UH 10.5MM K (LAL04TB)
10UH 10.5MM K (LAL04TB)
1/6 2.2K OHM J
1/6 12K OHM J
1/6 100K OHM J
1/6 2.7K OHM J
1/6 560 OHM J
1/6 560 OHM J
1/6 6.8K OHM J
1/6 2.2K OHM J
1/6 6.8K OHM J
1/6 6.8K OHM J
1/6 150 OHM J
1/6 100 OHM J
1/6 4.7K OHM J
1/6 1K OHM J
1/6 270 OHM J
1/6 47 OHM J
1/6 47 OHM J
1/6 750 OHM J
1/6 4.7K OHM J
1/6 1K OHM J
1/6 15K OHM J
1/6 7.5K OHM J
1/6 7.5K OHM J
1/6 5.6K OHM J
1/6 220 OHM J
1/6 330 OHM J
1/4 4.7K OHM J
1/6 3.9K OHM J
1/6 3.9K OHM J
1/4 47K OHM J
1/2 200 OHM J
1/6 2.2K OHM J
1/6 2.2K OHM J
1/4 330K OHM J
1/4 33K OHM J
1/4 2.7K OHM J
1/4 2.7K OHM J
1/4 1.5 OHM J
1/6 2.7K OHM J
1/4 390K OHM J
1/6 2.7K OHM J
1/6 100K OHM J
1/4 2.7K OHM J
1/4 22 OHM J
1/2 3.9 OHM J
1/2 820 OHM J
1/2 1.5K OHM J
AWG22 1/0.65 TIN COATING
1/4 100 OHM J
1/6 100 OHM J
1/6 100 OHM J
1/6 100 OHM J
1/6 100 OHM J
1/6 47K OHM J
1/6 22K OHM J
1/6 5.6K OHM J
1/6 5.6K OHM J
1/6 4.7K OHM J
1/6 13K OHM J
1/6 13K OHM J
AWG22 1/0.65 TIN COATING
1/6 1K OHM J
1/6 1K OHM J
1/6 10K OHM J
1/6 22K OHM J
1/6 10K OHM J
1/6 200 OHM J
1/6 200 OHM J
1/6 100 OHM J
1/6 1.2K OHM J
REMARK
Service Manual WP-895/895F, CP885/885F, CP485F
LOC
R542
R543
R544
R548
R550
R555
R560
R561
R562
R563
R566
R568
R569
R570
R572
R573
R576
R577
R578
R579
R580
R582
R583
R586
R587
R588
R589
R591
R592
R593
R594
R595
R596
R597
R598
R599
R601
R602
R605
R606
R608
R609
R614
R615
R620
R621
R622
R641
R642
R646
R647
R649
R650
R651
R652
R660
R661
R662
R700
R709
R710
PART CODE
RD-AZ223JRD-AZ271JRD-AZ222JRD-AZ103JRD-AZ102JRD-AZ102JRD-AZ101JRD-AZ101JRD-AZ152JRD-AZ152JRD-AZ220JRD-AZ102JRD-AZ181JRD-AZ271JRD-AZ101JRD-AZ101JRD-AZ181JRD-AZ181JRD-AZ330JRD-AZ330JRD-AZ271JRD-AZ101JRD-AZ101JRD-AZ271JRD-AZ101JRD-AZ101JRD-AZ330JRD-AZ431JRD-AZ102JRD-AZ104JRD-AZ222JRD-AZ682JRD-AZ472JRN-4Z1502F
RN-4Z1502F
RD-AZ101JRD-AZ101JRD-AZ104JRD-AZ101JRD-AZ101JRD-2Z151JRD-2Z151JRD-AZ102JRD-AZ102JRD-AZ102JRD-AZ102JRD-AZ102JRD-AZ102JRD-AZ102JRD-AZ102JRD-AZ102JRD-AZ102JRD-AZ752JRD-AZ102JRD-AZ102JRD-AZ752JRD-AZ123JRD-AZ123JRD-2Z332JRD-AZ102JRD-AZ102J-
PART NAME
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R METAL FILM
R METAL FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
DESCRIPTION
1/6 22K OHM J
1/6 270 OHM J
1/6 2.2K OHM J
1/6 10K OHM J
1/6 1K OHM J
1/6 1K OHM J
1/6 100 OHM J
1/6 100 OHM J
1/6 1.5K OHM J
1/6 1.5K OHM J
1/6 22 OHM J
1/6 1K OHM J
1/6 180 OHM J
1/6 270 OHM J
1/6 100 OHM J
1/6 100 OHM J
1/6 180 OHM J
1/6 180 OHM J
1/6 33 OHM J
1/6 33 OHM J
1/6 270 OHM J
1/6 100 OHM J
1/6 100 OHM J
1/6 270 OHM J
1/6 100 OHM J
1/6 100 OHM J
1/6 33 OHM J
1/6 430 OHM J
1/6 1K OHM J
1/6 100K OHM J
1/6 2.2K OHM J
1/6 6.8K OHM J
1/6 4.7K OHM J
1/4 15K OHM F
1/4 15K OHM F
1/6 100 OHM J
1/6 100 OHM J
1/6 100K OHM J
1/6 100 OHM J
1/6 100 OHM J
1/2 150 OHM J
1/2 150 OHM J
1/6 1K OHM J
1/6 1K OHM J
1/6 1K OHM J
1/6 1K OHM J
1/6 1K OHM J
1/6 1K OHM J
1/6 1K OHM J
1/6 1K OHM J
1/6 1K OHM J
1/6 1K OHM J
1/6 7.5K OHM J
1/6 1K OHM J
1/6 1K OHM J
1/6 7.5K OHM J
1/6 12K OHM J
1/6 12K OHM J
1/2 3.3K OHM J
1/6 1K OHM J
1/6 1K OHM J
REMARK
LOC
R711
R712
R713
R720
R721
R722
R723
R724
R805
R806
R807
R808
R810
R811
R817
R820
R821
R823
R829
R830
R841
R851
R852
R855
R870
R901
R902
R903
R910
R911
R912
R913
R921
R922
R923
R983
R996
R997
RA1
RA10
RA11
RA12
RA13
RA14
RA16
RA19
RA2
RA29
RA3
RA32
RA4
RA44
RA5
RA6
RA7
RA8
RA9
RA90
RA91
RA92
- 80 -
PART CODE
RD-AZ103JRD-AZ181JRD-AZ331JRD-AZ122JRD-AZ181JRD-AZ221JRD-AZ331JRD-AZ471JRD-2Z100JRD-2Z472JRD-2Z272JRD-2Z821JRD-4Z102JRC-2Z565KP
RD-AZ473JRD-AZ102JRD-4Z102JRD-2Z272JRD-AZ103JRD-AZ332JRD-2Z470JRD-AZ391JRD-AZ102JRD-4Z335JRD-2Z222JRD-AZ221JRD-AZ221JRD-AZ221JRD-AZ101JRD-AZ101JRD-AZ101JRD-AZ101JRC-2Z102KRC-2Z102KRC-2Z102KRD-4Z472JRD-2Z105JRD-2Z102JRD-AZ220JRD-AZ101JRD-AZ750JRD-AZ750JRD-AZ113JRD-AZ750JRD-AZ750JRD-AZ750JRD-AZ101JRD-AZ102JRD-AZ101JRD-AZ680JRD-AZ101JRD-AZ113JRD-AZ333JRD-AZ750JRD-AZ333JRD-AZ750JRD-AZ750JRD-AZ220JRD-AZ473JRD-AZ223J-
PART NAME
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON COMP
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON COMP
R CARBON COMP
R CARBON COMP
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
DESCRIPTION
1/6 10K OHM J
1/6 180 OHM J
1/6 330 OHM J
1/6 1.2K OHM J
1/6 180 OHM J
1/6 220 OHM J
1/6 330 OHM J
1/6 470 OHM J
1/2 10 OHM J
1/2 4.7K OHM J
1/2 2.7K OHM J
1/2 820 OHM J
1/4 1K OHM J
1/2 5.6M OHM K
1/6 47K OHM J
1/6 1K OHM J
1/4 1K OHM J
1/2 2.7K OHM J
1/6 10K OHM J
1/6 3.3K OHM J
1/2 47 OHM J
1/6 390 OHM J
1/6 1K OHM J
1/4 3.3M OHM J
1/2 2.2K OHM J
1/6 220 OHM J
1/6 220 OHM J
1/6 220 OHM J
1/6 100 OHM J
1/6 100 OHM J
1/6 100 OHM J
1/6 100 OHM J
1/2 1K OHM K
1/2 1K OHM K
1/2 1K OHM K
1/4 4.7K OHM J
1/2 1M OHM J
1/2 1K OHM J
1/6 22 OHM J
1/6 100 OHM J
1/6 75 OHM J
1/6 75 OHM J
1/6 11K OHM J
1/6 75 OHM J
1/6 75 OHM J
1/6 75 OHM J
1/6 100 OHM J
1/6 1K OHM J
1/6 100 OHM J
1/6 68 OHM J
1/6 100 OHM J
1/6 11K OHM J
1/6 33K OHM J
1/6 75 OHM J
1/6 33K OHM J
1/6 75 OHM J
1/6 75 OHM J
1/6 22 OHM J
1/6 47K OHM J
1/6 22K OHM J
REMARK
Service manual WP 895/895F, CP885/885F, CP485F
6. Service Parts List
(DTB-21U7)
CAUTION
“ ! “Parts recommended for stock.
“ R “Safety critical componen, Replace only with genuine Daewoo safety parts.
LOC
ZZ110
00030
M751
M821
ZZ100
ZZ120
M211
M541
M542
M781
ZZ130
20
30
40
M191
M191A
M201A
M201B
M201C
M211A
M211B
M481
M481A
M561
P402A
PWC1
SP01A
SP02A
V901
ZZ131
ZZ132
ZZ200
M801
ZZ210
P601A
SP01
SP02
ZZ290
10
40
20
30
50
60
C106
C118
C315
C402
C408
C415
C430
C431
C604
C801
C805
C811
C812
C813
C814
C820
C823
C832
C840
C841
C861
C866
C900
PART CODE
PTACPWB21U7FS
4850Q00910
4857539601
4858213801
48B4846G22
PTBCSHB21U7S
4852161901
4855415800
4855800022
4857817610
PTCACAB21U7FFS
2193011101
2224050001
4856812001
4851947101
7178301011
4856013300
4856215402
4856013302
7172401612
7178301211
4854862501
4856716000
48556175SD01
4850704N07
4859906210
7178301011
7178301011
4859637360
58G0000147
48519A5210
PTFMSJB21U7S
4852081201
PTSPPWB21U7FS
4850704S28
4858314910
4858314910
PTMPMSB21U7FF
2193100801
2291050314
2193011101
2291050617P
2291140501
2291051001
CEXF1H221V
CMXL1J474J
CEXF2A470V
CMYH3C622J
CMYE2G304J
CEXF2E479V
CCXB3D681K
CMXM2A103J
CEXF1E102V
CL1UC3474M
CEYN2G121P
CCYR3D681K
CH1BFE472M
CEXF2E101V
CEYF2E470V
CCYR3A471K
CEXF1E102V
CEXF1E102V
CEXF1C222V
CEXF1C332V
CEXF1E102C
CCYR3A471K
CCXB3D102K
PART NAME
ACCESSORY AS
BATTERY
COVER JACK
BAG INSTRUCTION
TRANSMITTER REMOCON
COVER BACK AS
COVER BACK
S/PLATE
LABEL SERIAL
CLOTH BLACK
CABINET AS
SOLDER WIRE
BOND
TIE CABLE
BUTTON CTRL AS
SCREW TAPPING
SCREW CRT FIXING AS
WASHER RUBBER
SCREW CRT FIXING AS
SCREW TAPPING
SCREW TAPPITE
BUTTON POWER
SPRING
MARK BRAND
CONNECTOR
CORD POWER
SCREW TAPPING
SCREW TAPPING
"CRT (PHILIPS 21"") "
COIL DEGAUSSING
CRT GROUND AS
MASK FRONT AS
MASK FRONT
SPEAKER AS
CONN AS
SPEAKER
SPEAKER
PCB MAIN MANUAL AS
SOLDER BAR
FLUX SOLVENT
SOLDER WIRE
FLUX SOLDER
WAX COVER
FLUX KILLER
C ELECTRO
C MYLAR
C ELECTRO
C MYLAR
C MYLAR
C ELECTRO
C CERA
C MYLAR
C ELECTRO
C LINE ACROSS
C ELECTRO
C CERA
C CERA AC
C ELECTRO
C ELECTRO
C CERA
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C CERA
C CERA
DESCRIPTION
DTB-21U7FZF-S
AAA R03/NN SUPERGARD
21U7 ABS GY
L. D. P. E. T0. 05X250X40
R-46G22
DTB-21U7ZJF-S
21U7 HIPS GY
150ART P/E FILM (C/TV)
ART 90 70X19
"300 MM 20""
"
DTB-21U7FZF-S
RS 60-1.2 1.6A
TB-2507
NYLON66 DA100
21U7 4952901+5547601
TT2 WAS 3X10 MFZN
L-80
20''
L-190
TT2 TRS 4X16 MFZN BK
TT2 WAS 3X12 MFZN
21U7 ABS GY
14Q1/M3 SWPA PIE0.5
DAEWOO 21T5 (SILVER)
SE100J+172792+USW=500
W/F 6-LO (LOMAX NEW)
TT2 WAS 3X10 MFZN
TT2 WAS 3X10 MFZN
A51ERF135X80 (FLAT)
DC-21SF
21A5
DTB-21U7ZJF-S
21U7 HIPS GY
DTB-21U7FZF-S
YH025-04+35089+ULW=600
SP-33129A03
SP-33129A03
DTB-21U7FZF-S
SN:PB=63:37 3PI(NO FLUX)
IM-1000
RS 60-1.2 1.6A
CF-329D
60G/PC
KFT-7
50V RSS 220MF (10X16) TP
63V 0.47MF MKT
100V RSS 47MF (10X16) TP
1.6KV 6200PF J (BUP)
400V 0.3MF J (PL)
250V RSS 4.7MF (10X16)TP
2KV B 680PF K (TAPPING)
100V 0.01MF J (TP)
25V RSS 1000MF (13X20) TP
0.47MF 1J(UCVSNDF/SV
400V LHS 120MF
2KV R 680PF K 125C
AC400V 4700PF M U/C/V
250V RSS 100MF 18X35.5
250V RSS 47MF (16X25
1KV 470PF K 125C
25V RSS 1000MF (13X20) TP
25V RSS 1000MF (13X20) TP
16V RSS 2200MF(13X25)TP
16V RSS 3300MF
25V RUS 1000MF 13X20 TP
1KV 470PF K 125C
2KV B 1000 PF K (TAPPING)
LOC
C910
C997
D403
D820
D860
F801
G900
I101
I301
I301A
I301B
I501
I601
I602
I602A
I602B
I702
I703
I801
I801A
I801B
I804
I806
I810
I820
I822
I823
I901
I901A
I901B
JP01
JPA1
JPA2
JPA3
L150
L380
L381
L401
L802
LF801
M351
M601
P401
P402
P501
P601
P801
P802
P905
Q401
R415
R450
R801
R802
R803
R804
R819
R850
R888
R906
SCT1
SF1
SF2
SW801
T401
T402
T801
U100
X501
REMARK
R
R !
R !
R
R
!
!
81
PART CODE
CEXF2E479V
CEXF2E100V
DDG3-----DRGP30J--DRGP30J--5FSCB4022R
4SG0DX0001
1TDA4470M1TDA8358J4857024421
7174301011
1DW3834AE2
1MSP3410V3
1TDA8944J4857024421
7174301011
1AT24C16PC
1TS0P1238W
1STRF66544857027701
7174300811
1KP1010C-1SE110N--TX0202DA-1L7805CV-1L7808CV-1L7805CV-1TDA6107Q4857031100
7174300811
4859102130
4859200401
4859200401
4859108450
58E0000041
58C0000120
58C0000120
58H0000016
58C9430599
5PLF24A1-4858900002
4856813600
4850706N08
4859242420
4850705N14
4859231720
4859287320
4859242220
4859262120
T2SD2578-RS02Y102JS
RS02Y223JS
DPC7R0M290
RS02Y683JS
RS02Y473JS
RF02Y228KRX10B339JN
RS02Y309JS
RD-4Z273JRF01Y209JA
4859303530
5PK3953M-5PK9650M-5S40101143
50D19A1--50H0000240
50M3934A94859722430
5XE20R250E
PART NAME
C ELECTRO
C ELECTRO
DIODE
DIODE
DIODE
FUSE CERA
SPARK GAP
IC IF
IC VERTICAL
HEAT SINK
SCREW TAPPTITE
IC MICOM
IC SOUND
IC AUDIO
HEAT SINK
SCREW TAPPTITE
IC MEMORY
IC PREAMP
IC SMPS
HEAT SINK
SCREW TAPPTITE
IC PHOTO COUPLER
IC
THYRISTOR
IC REGULATOR
IC REGULATOR
IC REGULATOR
IC VIDEO
HEAT SINK
SCREW TAPPTITE
JACK EARPHONE
SOCKET RGB
SOCKET RGB
JACK PIN BOARD
COIL AFT
COIL CHOKE
COIL CHOKE
COIL H-LINEARITY
COIL CHOKE
FILTER LINE
HOLDER LED AS
HOLDER WIRE
CONNECTOR
CONN WAFER
CONNECTOR
CONN WAFER
CONN WAFER
CONN WAFER
CONN WAFER
TR
R M-OXIDE FILM
R M-OXIDE FILM
POSISTOR
R M-OXIDE FILM
R M-OXIDE FILM
R FUSIBLE
R CEMENT
R M-OXIDE FILM
R CARBON FILM
R FUSIBLE
SOCKET CRT
FILTER SAW
FILTER SAW
SW PUSH
TRANS DRIVE
FBT
TRANS SMPS
TUNER VARACTOR
CRYSTAL QUARTZ
DESCRIPTION
250V RSS 4.7MF (10X16)TP
250V RSS 10MF (10X20) TP
DG3
RGP30J
RGP30J
SEMKO F4AH 4A 250V MF51
SSG-102-A1 (1.0KV)
TDA4470-M
TDA8358J
I602A (CP-385)
TT2 RND 3X10 MFZN
DW3834A C4 AE2
MSP3410G-V3
TDA8944J
I602A (CP-385)
TT2 RND 3X10 MFZN
AT24C16-10PC
TSOP1238WI1
STR-F6654
AL EX
TT2 RND 3X8 MFZN
KP-1010C
SE110N
X0202DA
L7805CV
L7808CV
L7805CV
TDA6107Q
A1050P-H24 T2.0
TT2 RND 3X8 MFZN
YSC-1537
SR-21A1 (ANGLE TYPE)
SR-21A1 (ANGLE TYPE)
YSC03P-4120-14A
TRF-A005
CH-100Q
CH-100Q
L-102 (102UH)
AZ-9004Y(94MH)
LF-24A1
LH-3P
NYLON 66 DAWH-13NA
6PIN 500MM BOARD IN TYPE
YFW800-04
BIC-05T-25T+ULW=500
YW025-04
MKS2822 (LOMAX NEW TYPE)
YFW800-02
YFW 800-01 A5MODELS
2SD2578
2W 1K OHM J SMALL
2W 22K OHM J SMALL
96709 (BC)
2W 68K OHM J SMALL
2W 47K OHM J SMALL
2W 0.22 OHM K
10W 3.3 OHM J BENCH 4P
2W 3 OHM J SMALL
1/4 27K OHM J
1W 2 OHM J A CURVE
PCS629-03C
K3953M
K9650M
PS3-22SP (P.C.B)
TD-19A1
1152.7001
2084.0090
UV1316/AIG-3
HC-49/U 20.2500MHZ 30PPM
REMARK
!
R
R
R
R
R
R
R
!
R
R
R
R
R
!
R !
!
R
Service manual WP 895/895F, CP885/885F, CP485F
LOC
X601
Z153
ZZ200
E001
E002
E003
E004
E005
E006
E007
E008
E009
E010
E012
E013
E018
E019
E020
E021
E022
E023
E024
E025
E026
E027
E028
E029
E030
E031
E032
E033
E034
E035
E038
ZZ200
C102
C110
C117
C121
C122
C152
C153
C156
C157
C158
C164
C301
C305
C313
C320
C350
C351
C370
C401
C412
C418
C420
C424
C502
C504
C508
C510
C511
C519
C520
C521
C522
C525
C528
C529
C530
C546
C547
C549
C553
C597
C602
C605
C608
C610
C611
C612
PART CODE
5XE18R432E
5PYXT5R5MB
PTMPJBB21U7FF
4856310600
4856310600
4856310600
4856310600
4856310300
4856310300
4856310300
4856310300
4856310600
4856310600
4856310600
4856310600
4856310300
4856310300
4856310300
4856310600
4856310600
4856310300
4856310300
4856310600
4856310600
4856310600
4856310600
4856310600
4856310600
4856310300
4856310300
4856310300
4856310300
4856310300
4856310600
PTMPJRB21U7FF
CEXF1E470V
CXCH1H150J
CEXF1H229V
CEXF1H100V
CEXF1E100V
CEXF1E100V
CEXF1H229V
CBXF1H104Z
CEXF1E100V
CBXF1H104Z
CEXF1E470V
CMXM2A224J
CEXF1E221V
CMXM2A104J
CBXF1H104Z
CCXF1H103Z
CCXF1H103Z
CCXF1H473Z
CEXF1H101V
CEXF2C339V
CCXB1H102K
CCXB2H222K
CMXM2A333J
CEXF1E101V
CEXF1E470V
CEXF1H220V
CCXF1H473Z
CEXF1E100V
CEXF1H109V
CEXF1H109V
CEXF1H109V
CEXF1H109V
CEXF1H220V
CCXF1H223Z
CCXF1H223Z
CCXF1H223Z
CEXF1H339V
CBXF1H104Z
CEXF1H229V
CEXF1E101V
CEXF1H220V
CEXF1E221V
CEXF1E470V
CEXF1E100V
CEXF1E100V
CEXF1H339V
CEXF1H109V
PART NAME
CRYSTAL QUARTZ
FILTER CERA
PCB MAIN EYE LET AS
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
EYE LET
PCB MAIN RADIAL AS
C ELECTRO
C CERA
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C CERA SEMI
C ELECTRO
C CERA SEMI
C ELECTRO
C MYLAR
C ELECTRO
C MYLAR
C CERA SEMI
C CERA
C CERA
C CERA
C ELECTRO
C ELECTRO
C CERA
C CERA
C MYLAR
C ELECTRO
C ELECTRO
C ELECTRO
C CERA
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C CERA
C CERA
C CERA
C ELECTRO
C CERA SEMI
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
DESCRIPTION
REMARK
HC-49/U 18.43200MHZ 30PPM
XT5.5MB
DTB-21U7FZF-S
BSR 2.3(R2.3)
BSR 2.3(R2.3)
BSR 2.3(R2.3)
BSR 2.3(R2.3)
BSR T0.2 (R1.6)
BSR T0.2 (R1.6)
BSR T0.2 (R1.6)
BSR T0.2 (R1.6)
BSR 2.3(R2.3)
BSR 2.3(R2.3)
BSR 2.3(R2.3)
BSR 2.3(R2.3)
BSR T0.2 (R1.6)
BSR T0.2 (R1.6)
BSR T0.2 (R1.6)
BSR 2.3(R2.3)
BSR 2.3(R2.3)
BSR T0.2 (R1.6)
BSR T0.2 (R1.6)
BSR 2.3(R2.3)
BSR 2.3(R2.3)
BSR 2.3(R2.3)
BSR 2.3(R2.3)
BSR 2.3(R2.3)
BSR 2.3(R2.3)
BSR T0.2 (R1.6)
BSR T0.2 (R1.6)
BSR T0.2 (R1.6)
BSR T0.2 (R1.6)
BSR T0.2 (R1.6)
BSR 2.3(R2.3)
DTB-21U7FZF-S
25V RSS 47MF (5X11) TP
50V CH 15PF J (TAPPING)
50V RSS 2.2MF (5X11) TP
50V RSS 10MF (5X11) TP
25V RSS 10MF TP
25V RSS 10MF TP
50V RSS 2.2MF (5X11) TP
50V F 0.1MF Z (TAPPING)
25V RSS 10MF TP
50V F 0.1MF Z (TAPPING)
25V RSS 47MF (5X11) TP
100V 0.22MF J BULK
25V RSS 220MF (8X11.5) TP
100V 0.1MF J TP
50V F 0.1MF Z (TAPPING)
50V F 0.01MF Z (TAPPING)
50V F 0.01MF Z (TAPPING)
50V F 0.047MF Z (TAPPING)
50V RSS 100MF (8*11.5) TP
160V RSS 3.3MF (8X16) TP
50V B 1000PF K (TAPPING)
500V B 2200PF K (TAPPING)
100V 0.033MF J TP
25V RSS 100MF (6.3X11) TP
25V RSS 47MF (5X11) TP
50V RSS 22MF (5X11) TP
50V F 0.047MF Z (TAPPING)
25V RSS 10MF TP
50V RSS 1MF (5X11) TP
50V RSS 1MF (5X11) TP
50V RSS 1MF (5X11) TP
50V RSS 1MF (5X11) TP
50V RSS 22MF (5X11) TP
50V F 0.022MF Z (TAPPING)
50V F 0.022MF Z (TAPPING)
50V F 0.022MF Z (TAPPING)
50V RSS 3.3MF (5X11) TP
50V F 0.1MF Z (TAPPING)
50V RSS 2.2MF (5X11) TP
25V RSS 100MF (6.3X11) TP
50V RSS 22MF (5X11) TP
25V RSS 220MF (8X11.5) TP
25V RSS 47MF (5X11) TP
25V RSS 10MF TP
25V RSS 10MF TP
50V RSS 3.3MF (5X11) TP
50V RSS 1MF (5X11) TP
LOC
C613
C614
C615
C616
C617
C622
C623
C624
C625
C626
C629
C630
C634
C635
C636
C641
C642
C660
C661
C662
C665
C666
C667
C668
C669
C690
C691
C770
C803
C804
C806
C807
C808
C809
C821
C824
C831
C835
C844
C850
C863
C888
C902
F801A
F801B
L101
Q103
Q104
Q120
Q150
Q151
Q402
Q510
Q511
Q542
Q543
Q544
Q550
Q599
Q601
Q701
Q702
Q807
Q808
Q809
Q810
Q811
Q850
Q851
QA01
RB10
SW700
SW701
SW702
SW703
SW704
Z601
Z602
Z603
Z604
Z605
Z606
82
PART CODE
CEXF1H109V
CEXF1H109V
CEXF1H109V
CEXF1E100V
CBXF1H104Z
CXCH1H680J
CEXF1H109V
CEXF1H109V
CEXF1E101V
CEXF1E101V
CBXF1H104Z
CEXF1E470V
CEXF1E100V
CCXB1H102K
CEXF1E470V
CEXF1E101V
CEXF1E101V
CEXF1C100A
CMXM2A224J
CMXM2A224J
CCXB1H472K
CBXF1H104Z
CCXB1H472K
CMXM2A224J
CMXM2A224J
CEXF1H479V
CEXF1H479V
CEXF1C101V
CCXF3A472Z
CCXF3A472Z
CEXF1H220V
CCXF1H473Z
CEXF1H479V
CCXB1H102K
CCXB1H102K
CCXB3A471K
CCXB3A471K
CEXF1E470V
CEXF1E101V
CCXB1H821K
CEXF1E101V
CEXF1C470V
CMXL2E104K
4857415001
4857415001
5CPX479K-T2SC5343YT2SC5343YT2SC5343YT2SC5343YT2SC5343YT2SD1207TT2SC5343YT2SC5343YT2SA1980YT2SA1980YT2SA1980YT2SC5343YT2SA1980YT2SA1980YT2SC5343YT2SA1980YT2SC5343YT2SC5343YT2SC5343YT2SC5343YT2SC5343YT2SC5343YT2SC5343YT2SC5343YRV5426103P
5S50101090
5S50101090
5S50101090
5S50101090
5S50101090
5PXF1B471M
5PXF1B471M
5PXF1B471M
5PXF1B471M
5PXF1B471M
5PXF1B471M
PART NAME
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C CERA SEMI
C CERA
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C CERA SEMI
C ELECTRO
C ELECTRO
C CERA
C ELECTRO
C ELECTRO
C ELECTRO
C ELECTRO
C MYLAR
C MYLAR
C CERA
C CERA SEMI
C CERA
C MYLAR
C MYLAR
C ELECTRO
C ELECTRO
C ELECTRO
C CERA
C CERA
C ELECTRO
C CERA
C ELECTRO
C CERA
C CERA
C CERA
C CERA
C ELECTRO
C ELECTRO
C CERA
C ELECTRO
C ELECTRO
C MYLAR
CLIP FUSE
CLIP FUSE
COIL PEAKING
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
TR
R SEMI FIXED
SW TACT
SW TACT
SW TACT
SW TACT
SW TACT
FILTER EMI
FILTER EMI
FILTER EMI
FILTER EMI
FILTER EMI
FILTER EMI
DESCRIPTION
50V RSS 1MF (5X11) TP
50V RSS 1MF (5X11) TP
50V RSS 1MF (5X11) TP
25V RSS 10MF TP
50V F 0.1MF Z (TAPPING)
50V CH 68PF J (TAPPING)
50V RSS 1MF (5X11) TP
50V RSS 1MF (5X11) TP
25V RSS 100MF (6.3X11) TP
25V RSS 100MF (6.3X11) TP
50V F 0.1MF Z (TAPPING)
25V RSS 47MF (5X11) TP
25V RSS 10MF TP
50V B 1000PF K (TAPPING)
25V RSS 47MF (5X11) TP
25V RSS 100MF (6.3X11) TP
25V RSS 100MF (6.3X11) TP
16V RSM 10MF 5X7
100V 0.22MF J BULK
100V 0.22MF J BULK
50V B 4700PF K (TAPPING)
50V F 0.1MF Z (TAPPING)
50V B 4700PF K (TAPPING)
100V 0.22MF J BULK
100V 0.22MF J BULK
50V RSS 4.7MF (5*11) TP
50V RSS 4.7MF (5*11) TP
16V RSS 100MF (6.3X11) TP
1KV F 4700PF Z (T)
1KV F 4700PF Z (T)
50V RSS 22MF (5X11) TP
50V F 0.047MF Z (TAPPING)
50V RSS 4.7MF (5*11) TP
50V B 1000PF K (TAPPING)
50V B 1000PF K (TAPPING)
1KV B 470PF K (T)
1KV B 470PF K (T)
25V RSS 47MF (5X11) TP
25V RSS 100MF (6.3X11) TP
50V B 820PF K (TAPPING)
25V RSS 100MF (6.3X11) TP
16V RSS 47MF (5X11) TP
250V 0.1MF K MEU TP
PFC5000-0702
PFC5000-0702
4.7UH K RADIAL
2SC5343Y
2SC5343Y
2SC5343Y
2SC5343Y
2SC5343Y
2SD1207-T (TAPPING)
2SC5343Y
2SC5343Y
2SA1980Y
2SA1980Y
2SA1980Y
2SC5343Y
2SA1980Y
2SA1980Y
2SC5343Y
2SA1980Y
2SC5343Y
2SC5343Y
2SC5343Y
2SC5343Y
2SC5343Y
2SC5343Y
2SC5343Y
2SC5343Y
RH0638C 10K OHM B
SKHV17910A
SKHV17910A
SKHV17910A
SKHV17910A
SKHV17910A
CFI 06 B 1H 470PF
CFI 06 B 1H 470PF
CFI 06 B 1H 470PF
CFI 06 B 1H 470PF
CFI 06 B 1H 470PF
CFI 06 B 1H 470PF
REMARK
Service manual WP 895/895F, CP885/885F, CP485F
LOC
Z607
Z608
ZZ200
20
10
A001
C101
C103
C104
C116
C119
C120
C151
C154
C160
C161
C163
C440
C500
C501
C503
C505
C506
C507
C509
C512
C516
C526
C527
C534
C535
C536
C548
C554
C560
C561
C568
C571
C578
C579
C581
C585
C589
C590
C591
C601
C603
C620
C621
C631
C650
C830
CA01
CA02
CA03
CA04
CA07
CA08
CA10
CA13
CA14
CA15
CA16
CA17
CA18
CA19
CA20
D100
D101
D103
D313
D360
D361
D362
D367
D405
D407
D408
D410
D411
D450
D520
PART CODE
5PXF1B471M
5PXF1B471M
PTMPJAB21U7FF
2TM10006LB
2TM14006LB
4859806393
CCZB1H101K
CCZB1H102K
CCZB1H102K
CBZF1H104Z
CCZF1H103Z
CCZB1H102K
CCZF1H103Z
CCZF1H103Z
CCZF1H103Z
CZSL1H220J
CCZF1H103Z
85801065GY
CCZF1H103Z
CCZF1H103Z
CBZF1H104Z
CCZB1H102K
CBZF1H104Z
CCZF1H103Z
CCZF1H103Z
CCZF1H103Z
CCZB1H102K
CBZF1H104Z
CCZB1H102K
CCZB1H333K
CCZB1H333K
CCZB1H333K
CBZF1H104Z
CBZF1H104Z
CCZB1H101K
CCZB1H101K
CBZF1H104Z
CCZB1H101K
CCZB1H221K
CCZB1H221K
CCZB1H101K
CCZB1H101K
CCZB1H221K
CZCH1H309C
CZCH1H309C
CBZR1C472M
CBZR1C472M
CZCH1H309C
CZCH1H309C
CBZF1H104Z
CZSL1H680J
CBZF1H104Z
CCZB1H101K
CCZB1H101K
CCZB1H101K
CCZB1H102K
CCZB1H471K
CCZB1H471K
CCZB1H102K
CCZB1H471K
CCZB1H471K
CCZB1H471K
CCZB1H471K
CCZB1H471K
CCZB1H471K
CCZB1H222K
CCZB1H222K
DUZ33B---DBAT85---D1SS85TA-D1N4937G-DTZX22C--DUZ33B---DUZ33B---DUZ33B---D1N4937G-DRGP15J--DRGP15J--D1N4004S-D1N4004S-D1N4937G-D1N4148---
PART NAME
FILTER EMI
FILTER EMI
PCB MAIN AXIAL AS
TAPE MASKING
TAPE MASKING
PCB MAIN
C CERA
C CERA
C CERA
C CERA SEMI
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
WIRE COPPER
C CERA
C CERA
C CERA SEMI
C CERA
C CERA SEMI
C CERA
C CERA
C CERA
C CERA
C CERA SEMI
C CERA
C CERA
C CERA
C CERA
C CERA SEMI
C CERA SEMI
C CERA
C CERA
C CERA SEMI
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA SEMI
C CERA
C CERA SEMI
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
C CERA
DIODE ZENER
DIODE
DIODE
DIODE
DIODE ZENER
DIODE ZENER
DIODE ZENER
DIODE ZENER
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE
DESCRIPTION
CFI 06 B 1H 470PF
CFI 06 B 1H 470PF
DTB-21U7FZF-S
3M #232-MAP-C 6.2X2000M
3M #232 6.0X2000M
CP-485F 330X246XT1.6
50V B 100PF K (AXIAL)
50V B 1000PF K (AXIAL)
50V B 1000PF K (AXIAL)
50V F 0.1MF Z (AXIAL)
50V F 0.01MF Z
50V B 1000PF K (AXIAL)
50V F 0.01MF Z
50V F 0.01MF Z
50V F 0.01MF Z
50V SL 22PF J (AXIAL)
50V F 0.01MF Z
AWG22 1/0.65 TIN COATING
50V F 0.01MF Z
50V F 0.01MF Z
50V F 0.1MF Z (AXIAL)
50V B 1000PF K (AXIAL)
50V F 0.1MF Z (AXIAL)
50V F 0.01MF Z
50V F 0.01MF Z
50V F 0.01MF Z
50V B 1000PF K (AXIAL)
50V F 0.1MF Z (AXIAL)
50V B 1000PF K (AXIAL)
50V B 0.033MF K (AXIAL)
50V B 0.033MF K (AXIAL)
50V B 0.033MF K (AXIAL)
50V F 0.1MF Z (AXIAL)
50V F 0.1MF Z (AXIAL)
50V B 100PF K (AXIAL)
50V B 100PF K (AXIAL)
50V F 0.1MF Z (AXIAL)
50V B 100PF K (AXIAL)
50V B 220PF K (AXIAL)
50V B 220PF K (AXIAL)
50V B 100PF K (AXIAL)
50V B 100PF K (AXIAL)
50V B 220PF K (AXIAL)
50V CH 3PF C (AXIAL)
50V CH 3PF C (AXIAL)
Y5R 16V 4700PF M AXIAL
Y5R 16V 4700PF M AXIAL
50V CH 3PF C (AXIAL)
50V CH 3PF C (AXIAL)
50V F 0.1MF Z (AXIAL)
50V SL 68PF J (AXIAL)
50V F 0.1MF Z (AXIAL)
50V B 100PF K (AXIAL)
50V B 100PF K (AXIAL)
50V B 100PF K (AXIAL)
50V B 1000PF K (AXIAL)
50V B 470PF K (AXIAL)
50V B 470PF K (AXIAL)
50V B 1000PF K (AXIAL)
50V B 470PF K (AXIAL)
50V B 470PF K (AXIAL)
50V B 470PF K (AXIAL)
50V B 470PF K (AXIAL)
50V B 470PF K (AXIAL)
50V B 470PF K (AXIAL)
50V B 2200PF K (AXIAL)
50V B 2200PF K (AXIAL)
UZ-33B
BAT85 (TAPPING)
1SS85TA
1N4937G
TZX22C (TAPPING)
UZ-33B
UZ-33B
UZ-33B
1N4937G
RGP15J
RGP15J
1N4004S
1N4004S
1N4937G
1N4148 (TAPPING)
REMARK
LOC
D521
D533
D534
D537
D550
D551
D591
D597
D598
D599
D601
D602
D603
D801
D802
D803
D804
D805
D806
D808
D809
D811
D821
D824
D825
D830
D831
D840
D841
D850
D911
D912
D913
D997
DA03
DA06
DA07
DA08
DA09
DA10
DA11
DA15
DA16
DA20
DA27
DA32
J002
J003
J005
J006
J007
J008
J009
J013
J015
J016
J018
J019
J022
J023
J024
J025
J036
J038
J046
J047
J053
J054
J056
J057
J058
J061
J065
J070
J072
J073
J075
J076
J079
J080
J082
J088
83
PART CODE
D1N4148--D1N4148--D1N4148--D1N4148--D1N4148--D1N4148--DUZ2R7B--D1N4148--D1N4148--DTZX5V6B-D1N4148--D1N4148--85801065GY
DLT2A05G-DLT2A05G-DLT2A05G-DLT2A05G-D1N4937G-D1N4937G-D1N4937G-D1N4937G-DTZX6V2--DRGP15J--D1N4148--D1N4148--D1N4937G-D1N4937G-D1N4148--D1N4148--DUZ2R7B--D1N4004S-D1N4004S-D1N4004S-DLT2A05G-DTZX5V1B-DTZX5V6B-DTZX5V1B-DTZX5V6B-DTZX5V6B-DTZX5V6B-DTZX5V6B-DTZX5V6B-DTZX5V6B-DTZX5V6B-DTZX5V6B-DTZX5V6B-85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
PART NAME
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE ZENER
DIODE
DIODE
DIODE ZENER
DIODE
DIODE
WIRE COPPER
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE ZENER
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE ZENER
DIODE
DIODE
DIODE
DIODE
DIODE ZENER
DIODE ZENER
DIODE ZENER
DIODE ZENER
DIODE ZENER
DIODE ZENER
DIODE ZENER
DIODE ZENER
DIODE ZENER
DIODE ZENER
DIODE ZENER
DIODE ZENER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
DESCRIPTION
1N4148 (TAPPING)
1N4148 (TAPPING)
1N4148 (TAPPING)
1N4148 (TAPPING)
1N4148 (TAPPING)
1N4148 (TAPPING)
UZ-2.7B
1N4148 (TAPPING)
1N4148 (TAPPING)
TZX5V6B (TAPPING)
1N4148 (TAPPING)
1N4148 (TAPPING)
AWG22 1/0.65 TIN COATING
LT2A05G
LT2A05G
LT2A05G
LT2A05G
1N4937G
1N4937G
1N4937G
1N4937G
TZX6V2B (TAPPING)
RGP15J
1N4148 (TAPPING)
1N4148 (TAPPING)
1N4937G
1N4937G
1N4148 (TAPPING)
1N4148 (TAPPING)
UZ-2.7B
1N4004S
1N4004S
1N4004S
LT2A05G
TZX5V1B (TAPPING)
TZX5V6B (TAPPING)
TZX5V1B (TAPPING)
TZX5V6B (TAPPING)
TZX5V6B (TAPPING)
TZX5V6B (TAPPING)
TZX5V6B (TAPPING)
TZX5V6B (TAPPING)
TZX5V6B (TAPPING)
TZX5V6B (TAPPING)
TZX5V6B (TAPPING)
TZX5V6B (TAPPING)
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
REMARK
Service manual WP 895/895F, CP885/885F, CP485F
LOC
J100
J101
J111
J112
J120
J123
J124
J153
J166
J201
J234
J826
J827
J828
J829
J833
J835
J836
J840
J841
J844
J845
J846
J853
J858
J859
J860
J865
J873
J874
J876
J878
J879
J880
J881
J883
J885
J887
J888
J889
J891
J896
J903
J909
J912
J914
J915
J916
J917
J918
J919
J920
L105
L153
L501
L502
L503
L504
L601
L602
L605
L650
L801
LA01
LA02
LA03
LA04
R101
R103
R104
R105
R106
R107
R110
R111
R116
R117
R118
R120
R131
R151
R152
PART CODE
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
85801065GY
5CPZ479K02
5CPZ120K02
5CPZ479K02
RD-4Z220J5CPZ479K02
5CPZ479K02
5CPZ479K02
5CPZ479K02
5CPZ479K02
5MC0000100
5MC0000100
5CPZ100K04
5CPZ100K04
5CPZ100K04
5CPZ100K04
RD-AZ222JRD-AZ123JRD-AZ104JRD-AZ272JRD-AZ561JRD-AZ561JRD-AZ682JRD-AZ222JRD-AZ682JRD-AZ682JRD-AZ151JRD-AZ101JRD-AZ472JRD-AZ102JRD-AZ271J-
PART NAME
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
WIRE COPPER
COIL PEAKING
COIL PEAKING
COIL PEAKING
R CARBON FILM
COIL PEAKING
COIL PEAKING
COIL PEAKING
COIL PEAKING
COIL PEAKING
COIL BEAD
COIL BEAD
COIL PEAKING
COIL PEAKING
COIL PEAKING
COIL PEAKING
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
DESCRIPTION
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
AWG22 1/0.65 TIN COATING
4.7UH 3.5MM K (LAL02TB)
12UH 3.5MM K (LAL02TB)
4.7UH 3.5MM K (LAL02TB)
1/4 22 OHM J
4.7UH 3.5MM K (LAL02TB)
4.7UH 3.5MM K (LAL02TB)
4.7UH 3.5MM K (LAL02TB)
4.7UH 3.5MM K (LAL02TB)
4.7UH 3.5MM K (LAL02TB)
MD-5 (HC-3550)
MD-5 (HC-3550)
10UH 10.5MM K (LAL04TB)
10UH 10.5MM K (LAL04TB)
10UH 10.5MM K (LAL04TB)
10UH 10.5MM K (LAL04TB)
1/6 2.2K OHM J
1/6 12K OHM J
1/6 100K OHM J
1/6 2.7K OHM J
1/6 560 OHM J
1/6 560 OHM J
1/6 6.8K OHM J
1/6 2.2K OHM J
1/6 6.8K OHM J
1/6 6.8K OHM J
1/6 150 OHM J
1/6 100 OHM J
1/6 4.7K OHM J
1/6 1K OHM J
1/6 270 OHM J
REMARK
LOC
R153
R154
R155
R160
R161
R162
R163
R164
R177
R190
R191
R301
R310
R311
R330
R331
R350
R351
R370
R394
R395
R396
R398
R401
R402
R404
R406
R420
R444
R490
R500
R501
R502
R503
R504
R506
R507
R508
R509
R511
R512
R513
R517
R518
R530
R532
R533
R535
R537
R541
R542
R543
R544
R548
R550
R555
R560
R561
R562
R563
R566
R568
R569
R570
R572
R573
R576
R577
R578
R579
R580
R582
R583
R586
R587
R588
R589
R591
R592
R593
R594
R595
84
PART CODE
RD-AZ470JRD-AZ470JRD-AZ751JRD-AZ472JRD-AZ102JRD-AZ153JRD-AZ752JRD-AZ752JRD-AZ562JRD-AZ221JRD-AZ331JRD-4Z472JRD-4Z432JRD-4Z432JRD-4Z473JRD-2Z201JRD-4Z222JRD-4Z222JRD-4Z159JRD-AZ272JRD-4Z394JRD-AZ272JRD-2Z109JRD-4Z272JRD-4Z220JRD-2Z399JRD-2Z182JRD-2Z152J85801065GY
RD-4Z101JRD-AZ101JRD-AZ101JRD-AZ101JRD-AZ101JRD-AZ473JRD-AZ223JRD-AZ562JRD-AZ562JRD-AZ472JRD-AZ133JRN-4Z1502F
85801065GY
RD-AZ102JRD-AZ102JRD-AZ103JRD-AZ223JRD-AZ103JRD-AZ201JRD-AZ201JRD-AZ122JRD-AZ223JRD-AZ271JRD-AZ222JRD-AZ103JRD-AZ102JRD-AZ102JRD-AZ101JRD-AZ101JRD-AZ152JRD-AZ152JRD-AZ220JRD-AZ102JRD-AZ181JRD-AZ271JRD-AZ101JRD-AZ101JRD-AZ181JRD-AZ181JRD-AZ330JRD-AZ330JRD-AZ271JRD-AZ101JRD-AZ101JRD-AZ271JRD-AZ101JRD-AZ101JRD-AZ330JRD-AZ431JRD-AZ102JRD-AZ104JRD-AZ222JRD-AZ682J-
PART NAME
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
WIRE COPPER
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R METAL FILM
WIRE COPPER
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
DESCRIPTION
1/6 47 OHM J
1/6 47 OHM J
1/6 750 OHM J
1/6 4.7K OHM J
1/6 1K OHM J
1/6 15K OHM J
1/6 7.5K OHM J
1/6 7.5K OHM J
1/6 5.6K OHM J
1/6 220 OHM J
1/6 330 OHM J
1/4 4.7K OHM J
1/4 4.3K OHM J
1/4 4.3K OHM J
1/4 47K OHM J
1/2 200 OHM J
1/4 2.2K OHM J
1/4 2.2K OHM J
1/4 1.5 OHM J
1/6 2.7K OHM J
1/4 390K OHM J
1/6 2.7K OHM J
1/2 1 OHM J
1/4 2.7K OHM J
1/4 22 OHM J
1/2 3.9 OHM J
1/2 1.8K OHM J
1/2 1.5K OHM J
AWG22 1/0.65 TIN COATING
1/4 100 OHM J
1/6 100 OHM J
1/6 100 OHM J
1/6 100 OHM J
1/6 100 OHM J
1/6 47K OHM J
1/6 22K OHM J
1/6 5.6K OHM J
1/6 5.6K OHM J
1/6 4.7K OHM J
1/6 13K OHM J
1/4 15K OHM F
AWG22 1/0.65 TIN COATING
1/6 1K OHM J
1/6 1K OHM J
1/6 10K OHM J
1/6 22K OHM J
1/6 10K OHM J
1/6 200 OHM J
1/6 200 OHM J
1/6 1.2K OHM J
1/6 22K OHM J
1/6 270 OHM J
1/6 2.2K OHM J
1/6 10K OHM J
1/6 1K OHM J
1/6 1K OHM J
1/6 100 OHM J
1/6 100 OHM J
1/6 1.5K OHM J
1/6 1.5K OHM J
1/6 22 OHM J
1/6 1K OHM J
1/6 180 OHM J
1/6 270 OHM J
1/6 100 OHM J
1/6 100 OHM J
1/6 180 OHM J
1/6 180 OHM J
1/6 33 OHM J
1/6 33 OHM J
1/6 270 OHM J
1/6 100 OHM J
1/6 100 OHM J
1/6 270 OHM J
1/6 100 OHM J
1/6 100 OHM J
1/6 33 OHM J
1/6 430 OHM J
1/6 1K OHM J
1/6 100K OHM J
1/6 2.2K OHM J
1/6 6.8K OHM J
REMARK
Service manual WP 895/895F, CP885/885F, CP485F
LOC
R596
R597
R598
R599
R601
R602
R605
R606
R608
R609
R614
R615
R620
R621
R622
R641
R642
R646
R647
R649
R650
R651
R652
R660
R661
R662
R700
R709
R710
R711
R712
R713
R720
R721
R722
R723
R724
R805
R806
R807
R808
R810
R811
R817
R820
R821
R823
PART CODE
RD-AZ472JRN-4Z1502F
RN-4Z1502F
RD-AZ101JRD-AZ101JRD-AZ104JRD-AZ101JRD-AZ101JRD-2Z151JRD-2Z151JRD-AZ102JRD-AZ102JRD-AZ102JRD-AZ102JRD-AZ102JRD-AZ102JRD-AZ102JRD-AZ102JRD-AZ102JRD-AZ102JRD-AZ752JRD-AZ102JRD-AZ102JRD-AZ752JRD-AZ752JRD-AZ752JRD-2Z332JRD-AZ102JRD-AZ102JRD-AZ103JRD-AZ181JRD-AZ331JRD-AZ122JRD-AZ181JRD-AZ221JRD-AZ331JRD-AZ471JRD-2Z100JRD-2Z472JRD-2Z272JRD-2Z821JRD-4Z102JRC-2Z565KP
RD-AZ473JRD-AZ102JRD-4Z102JRD-4Z682J-
PART NAME
R CARBON FILM
R METAL FILM
R METAL FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON COMP
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
DESCRIPTION
1/6 4.7K OHM J
1/4 15K OHM F
1/4 15K OHM F
1/6 100 OHM J
1/6 100 OHM J
1/6 100K OHM J
1/6 100 OHM J
1/6 100 OHM J
1/2 150 OHM J
1/2 150 OHM J
1/6 1K OHM J
1/6 1K OHM J
1/6 1K OHM J
1/6 1K OHM J
1/6 1K OHM J
1/6 1K OHM J
1/6 1K OHM J
1/6 1K OHM J
1/6 1K OHM J
1/6 1K OHM J
1/6 7.5K OHM J
1/6 1K OHM J
1/6 1K OHM J
1/6 7.5K OHM J
1/6 7.5K OHM J
1/6 7.5K OHM J
1/2 3.3K OHM J
1/6 1K OHM J
1/6 1K OHM J
1/6 10K OHM J
1/6 180 OHM J
1/6 330 OHM J
1/6 1.2K OHM J
1/6 180 OHM J
1/6 220 OHM J
1/6 330 OHM J
1/6 470 OHM J
1/2 10 OHM J
1/2 4.7K OHM J
1/2 2.7K OHM J
1/2 820 OHM J
1/4 1K OHM J
1/2 5.6M OHM K
1/6 47K OHM J
1/6 1K OHM J
1/4 1K OHM J
1/4 6.8K OHM J
REMARK
LOC
R829
R830
R841
R851
R852
R855
R870
R901
R902
R903
R910
R911
R912
R913
R921
R922
R923
R983
R996
R997
RA01
RA02
RA03
RA04
RA05
RA06
RA07
RA08
RA09
RA10
RA11
RA12
RA13
RA14
RA16
RA19
RA29
RA32
RA44
RA90
RA91
RA92
ZZ140
M641
M801
M811
M821
!
85
PART CODE
RD-AZ103JRD-AZ332JRD-2Z470JRD-AZ391JRD-AZ102JRD-4Z335JRD-2Z222JRD-AZ221JRD-AZ221JRD-AZ221JRD-AZ101JRD-AZ101JRD-AZ101JRD-AZ101JRC-2Z102KRC-2Z102KRC-2Z102KRD-4Z472JRD-2Z105JRD-2Z102JRD-AZ220JRD-AZ101JRD-AZ101JRD-AZ101JRD-AZ333JRD-AZ750JRD-AZ333JRD-AZ750JRD-AZ750JRD-AZ101JRD-AZ750JRD-AZ750JRD-AZ113JRD-AZ750JRD-AZ750JRD-AZ750JRD-AZ102JRD-AZ680JRD-AZ113JRD-AZ220JRD-AZ473JRD-AZ223JPTPKCPB21U7FS
6520010200
GPBBW3U7022
4858100L00
4858219101
PART NAME
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON COMP
R CARBON COMP
R CARBON COMP
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
R CARBON FILM
PACKING AS
STAPLE PIN
BOX
PAD
BAG LAMINATED
DESCRIPTION
1/6 10K OHM J
1/6 3.3K OHM J
1/2 47 OHM J
1/6 390 OHM J
1/6 1K OHM J
1/4 3.3M OHM J
1/2 2.2K OHM J
1/6 220 OHM J
1/6 220 OHM J
1/6 220 OHM J
1/6 100 OHM J
1/6 100 OHM J
1/6 100 OHM J
1/6 100 OHM J
1/2 1K OHM K
1/2 1K OHM K
1/2 1K OHM K
1/4 4.7K OHM J
1/2 1M OHM J
1/2 1K OHM J
1/6 22 OHM J
1/6 100 OHM J
1/6 100 OHM J
1/6 100 OHM J
1/6 33K OHM J
1/6 75 OHM J
1/6 33K OHM J
1/6 75 OHM J
1/6 75 OHM J
1/6 100 OHM J
1/6 75 OHM J
1/6 75 OHM J
1/6 11K OHM J
1/6 75 OHM J
1/6 75 OHM J
1/6 75 OHM J
1/6 1K OHM J
1/6 68 OHM J
1/6 11K OHM J
1/6 22 OHM J
1/6 47K OHM J
1/6 22K OHM J
DTB-21U7FZF-S
#3417 ALL
DTB-21U7
21U7 EPS
1300X1150 (U.K)
REMARK
Service Manual WP-895/895F, CP885/885F, CP485F
7. Exploded View
7-1 DWX-28W5
- 86 -
Service Manual WP-895/895F, CP885/885F, CP485F
7. Exploded View
7-2 D WF-28W8
- 87 -
Service Manual WP-895/895F, CP885/885F, CP485F
7. Exploded View
7-3 DTF-29U8
- 88 -
Service Manual WP-895/895F, CP885/885F, CP485F
7. Exploded View
7-4 DTP-28A7
- 89 -
Service Man ual WP-895/895F, CP885/885F, CP485F
7. Exploded View
7-5 DTP-28B1
- 90 -
Service Man ual WP-895/895F, CP885/885F, CP485F
7. Exploded View
7-6 DTP-28G7
- 91 -
Service Manual WP-895/895F, CP885/885F, CP485F
7. Exploded View
7-7 DTP-28G8
- 92 -
Service Manual WP-895/895F, CP885/885F, CP485F
7. Exploded View
7-8. DWF-28W9
- 93 -
Service Manual WP-895/895F, CP885/885F,CP-485F
7. Exploded view
7-9 DTB-21U7
- 94 -
SCHEMATIC DIAGRAM(WP-895 / CP-885)
SCHEMATIC DIAGRAM(WP-895F / CP-885F)
SCHEMATIC DIAGRAM(CP-485F)
(CP-485F)
686, AHYEON-DONG MAPO-GU
SEOUL, KOREA
C.P.O. BOX 8003 SEOUL, KOREA
TELEX : DWELEC K28177-8
CABLE : “DAEWOOELEC”