HP 8000 - Elite Convertible Minitower PC Specifications

Illustrated Parts & Service Map
HP Compaq 8000 and 8080 Elite
Convertible Minitower Business PC
© 2009, 2010 Hewlett-Packard Development Company, L.P. The information
contained herein is subject to change without notice. HP shall not be liable for
technical or editorial errors or omissions contained herein. Intel, Pentium,
Intel Inside, and the Intel logo are trademarks or registered trademarks of the
Intel Corporation and its subsidiaries in the U. S. and other countries.
Document Number 600574-002.
2nd Edition March 2010.
Cables
Key Specifications
1
Power switch/LED assembly
593218-001
2
Front USB, I/O assembly, power switch
593219-001
3
eSATA port assembly
497726-001
4
SATA cable, hard drive
593222-001
5
SATA cable, optical drive
593223-001
*
SATA cable, 18 inch, 1 straight end, 1 angled end
393958-001
*
SATA cable, 24 inch
392308-001
SATA cable, 14 inch, 2 straight ends
391740-001
463023-001
Processor Type
Intel® Celeron, Pentium Dual-Core, Core 2, Core2 Duo, Core2
Quad
*
*
DMS-59 to dual VGA cable
RAM Type
DDR3-SDRAM DIMMs, PC3-10600 (1333 MHz) non-ECC
*
Adapter, DVI to VGA
202997-001
Maximum RAM Supported
16 GB
*
Adapter, DisplayPort to VGA
484155-001
Expansion Slots
•
•
•
*
Adapter, DisplayPort to DVI
484156-001
(2) PCIe-x16
(1) PCIe-x1
(3) PCI
*Not shown
Chipset
Intel Q45 Express
Graphics Adapter
Integrated Intel GMA 4500 graphics
Bays
•
•
I/O Interfaces
Front: (4) USB, microphone, headphone
Rear: (6) USB, PS/2 keyboard and mouse, line in, line out,
VGA, DisplayPort, RJ-45, (1) serial port
Operating Systems
•
•
•
•
(3) external 5.25-inch
(3) external 3.5-inch
Keyboards (not illustrated)
PS/2, Basic
USB, Basic
USB SmartCard
USB Mini[b]
Washable[b]
Windows® Vista
Windows 7
Windows XP
FreeDos
Spare Parts
537745-xxx
537746-xxx
537747-xxx
535873-xxx
577495-xxx
Arabic[a]
-171
LA Spanish
-161
Belgian[c]
-181
Norwegian
-091
BHCSY[c]
-B41
People’s Republic of China
-AA1
BHCSY[d]
-BL1
Portuguese
-131
-271
Brazilian Portuguese
-201
Romanian[c]
Czech
-221
Russian
-251
Danish
-081
Saudi Arabia
-DE1
Finnish
-351
Slovakian
-231
French
-051
South Korea
-KD1
French Canadian
-121
Spanish
-071
German
-041
Swedish
-101
Greek
-151
Swiss
-111
Hebrew
-BB1
Taiwanese
-AB1
Hungarian
-211
Thai
-281
International[a]
-B31
Turkish
-141
International English
-L31
U.S.
-001
Italian
-061
U.K.
-031
Japanese
-291
[a] not for 537745
[b] only for -001, -121
[c] not for 537747
[d] only for 537747
Mass Storage Devices (not illustrated)
16X SATA DVD±RW drive with LightScribe
System Unit
581059-001
16X SATA DVD-ROM drive
581058-001
Blu-ray ROM DVD+/-RW SuperMulti DL Drive
581601-001
1 TB (10000 GB) SATA hard drive
585465-001
500 GB SATA hard drive, 3.5-inch
504339-001
1
Access panel
594636-001
320 GB USB hard drive
591387-001
2
Front bezel for use in 8000 models
593221-001
320 GB SATA hard drive, 3.5-inch
504338-001
3
Front bezel for use in 8080 models
608265-001
250 GB SATA hard drive, 3.5-inch
504337-001
4
Chassis
not spared
160 GB, 10000-RPM SATA hard drive, 2.5-inch with adapter
508312-001
5
Power supply, 325W, 89% efficient
508154-001
160 GB SATA hard drive
504336-001
*
5.25-inch bezel blank, jack black
570838-001
64 GB Solid State Drive (SSD)
581057-001
*
Power supply, 325W
508153-001
* Not shown
8000 & 8080 Elite IPSM, CMT Chassis
600574-002
page 1
Miscellaneous Parts
Standard and Optional Boards
System boards with thermal grease, alcohol pad, and CPU socket cover
1
System board
536883-001
*
System board, excludes ES/CS
593215-001
Memory modules (PC3-10600, CL9)
2
*
*
1 GB
2 GB
4 GB
576109-001
576110-001
585157-001
Other boards
*
*
Saffron WLAN 802.11a/b/g for use world-wide, includes bracket
Modem, PCIe, 56K, Agere International 56K, includes bracket
538048-001
490689-001
*
ATI HD4550 (RV710), 256-MB PCIeX16 graphics card
584217-001
*
ATI HD4650 (RV730), 1-GB PCIeX16 graphics card
538052-001
*
GeForce GT310 512-MB PCIeX16 graphics card
572029-001
*
nVidia Quadro NVS295 256-MB PCIe graphics card
*
nVidia Quadro NVS290 256-MB graphics card, low profile, includes brkt 456137-001
*
nVidia Quadro NVS290 256-MB graphics card, full-height
578226-001
460815-001
*
Broadcom NetXtreme Gbit Ethernet Plus NIC
488293-001
*
Video card, SDVO, ADD2, DVI-D, includes bracket
398333-001
*
Intel Gigabit NIC, includes bracket
490367-001
*
TV tuner graphics card
582725-001
*
1394 card, full height
515182-001
1
Fan, heatsink
593217-001
2
Speaker
392413-001
3
Chassis fan
593220-001
4
2nd serial port
392414-001
*
Card reader, 22-in-1
480032-001
*
Adapter, 5.25-inch to 3.25-inch, includes bezel
593226-001
*
Adapter, 2.5-inch
586721-001
*
Hood sensor
392417-001
*
Grommet, hard drive isolation
450712-001
*
Solenoid lock
392416-001
*
USB powered speakers
571536-001
*
Mouse, PS2, optical, jack black
537748-001
*
Mouse, optical, jack black
537749-001
*
Mouse, laser, jack black
570580-001
*
Printer port
497727-001
*
Modem cable
198220-001
*
Hard drive, removable carrier, DataPort
580619-001
*
Clamp lock, includes universal cable (plate not included)
508987-001
*Not shown
Intel Celeron Processors with alcohol pad and thermal grease
*
450, 2.2 GHz, 512-KB cache, single core
Modem RJ-11 adapters (not illustrated)
508256-001
Intel Pentium Dual Core Processors with alcohol pad and thermal grease
*
E5400, 2.7 GHz, 2-MB L2 cache
586743-001
*
E3300, 2.5 GHz, 1-MB L2 cache
585886-001
*
E3200, 2.5 GHz, 1-MB L2 cache
585885-001
Intel Core 2 Quad Processors with alcohol pad and thermal grease
*
Q9650, 3.00 GHz, 12-MB L2 cache
497734-001
*
Q9550, 2.83 GHz, 12-MB L2 cache
465758-001
*
Q9550S, 2.83 GHz, 12-MB L2 cache
593228-001
*
Q9505S, 2.83 GHz, 6-MB L2 cache (65W)
593229-001
*
Q9505, 2.83 GHz, 6-MB L2 cache (95W)
591607-001
*
Q8400S, 2.66 GHz, 4-MB L2 cache
593227-001
Austrian
417561-011
Italian
316904-065
Belgian
316904-181
Netherlands
316920-335
Czechoslovakian
234963-221
Polish
316904-241
French
316904-051
Saudi Arabian
316904-AR1
German
316904-045
Scandinavian
382848-DH1
Greek
316904-151
Swiss
417562-111
Hungarian
234963-215
Turkish
316904-141
Israel
316904-BB1
United Kingdom
158593-035
Intel Core 2 Duo Processors with alcohol pad and thermal grease
*
E8600, 3.33 GHz, 6-MB L2 cache
497732-001
*
E8500, 3.16 GHz, 6-MB L2 cache
466170-001
*
E8400, 3.00 GHz, 6-MB L2 cache
509554-001
*
E7600, 3.06 GHz, 3-MB L2 cache
573954-001
*
E7500, 2.93 GHz, 3-MB L2 cache
583006-001
*
E6500, 2.93 GHz, 2-MB L2 cache
586748-001
*
E6300, 2.80 GHz, 2-MB L2 cache
580748-001
*
E5300, 2.60 GHz, 2-MB L2 cache
516900-001
* Not shown
8000 & 8080 Elite IPSM, CMT Chassis
600574-002
page 2
System Board
Computer Setup Menu (Continued)
Heading
Option / Description
Security
Setup Password - Allows you to set and enable the setup (Administrator)
password.
Power-On Password - Allows you to set and enable power-on password.
Password Options - When any password exists allows you to lock legacy
resources, enable/disable network server mode, specify password requirement for warm boot, and allows you to enable/disable Setup Browse Mode.
Smart Cover (some models) - Allows you to lock/unlock cover lock and set
status of cover removal sensor.
Device Security (some models) - Enables/disables all I/O ports, audio, network controllers, SMBus controller, SATA ports, eSATA, and embedded
security devices.
USB Security - Allows you to set Device Available/Device Hidden for front
USB ports 3-6, rear USB ports 7-12, internal USB ports 1-2.
Slot Security - Allows you to disable any PCI or PCI Express slot.
Network Service Boot - Enables/disables boot from OS on a server.
System IDs - Allows you to set Asset tag, Ownership tag, Chassis serial
number, UUID, and keyboard locale setting.
DriveLock Security - Allows you to assign/modify a hard drive password for
added security.
System Security (some models) - Allows you to enable/disable:
• Data Execution Prevention
• PAVP (Protect Audio Video Path) (some models)
• Virtualization Technology
• Virtualization Technology Directed I/O
• Trusted Execution Technology
• Embedded Security Device Support
• OS management of Embedded Security Device through OS
System Board Connectors and Jumpers (component location may vary)
FRNT AUD
Front panel connector
SATA PWR0
Optical drive power connector
CHFAN2
System fan connector
PWR CMD
Power connector
PAR
Parallel port connector
PWR
Main power connector
IN/OUT
Double stack audio connector
PB/LED
Power switch connector
COMB
2nd media reader connector
FRNT_USB2
2nd USB connector
RJ45/USB
Stacked RJ-45/USB connectors FRNT_USB
1st USB connector
Master Boot Record Security - Protects the master boot record from viruses
or other corruption. Saves of copy of the current master boot record.
Setup Security Level - Provides method to allow users limited access to
change specified setup options without knowing Setup password.
Power
USB
USB connector
MEDIA
Media card reader connector
VGA/
COMA
Stacked VGA/serial connector
SPKR
Speaker connector
DISPLAYPORT
DisplayPort connector
SATA1
Primary SATA hard drive
KB/MS
PS/2 connectors
SATA2
1st SATA optical drive
HLOCK
Hood lock connector
SATA3
2nd SATA optical drive
PWRCPU
CPU power connector
SATA4
2nd SATA hard drive
HSENSE
Hood sensor connector
ESATA
Internal eSATA connector
XU1
Processor socket
PCI3
PCI slot 3
CPUFAN
CPU/heat sink fan connector
PCI2
PCI slot 2
BAT
Battery socket
PCI1
PCI slot 1
PSWD
Password header
X4PCEXP
PCIe X16, slot 1
CMOS
CMOS header
X16PCIEXP
PCIe X16, slot 2
DIMM1-4
Memory sockets
X1PCIEXP
PCIe X1 slot
SATA
PWR1
Hard drive power connector
Hardware Power Management - Allows you to enable/disable SATA bus
power management and S5 maximum power savings.
Thermal - Allows you to control minimum permitted fan idle speed.
Advanced
BIOS Power-On - Allows you to set the computer to turn on at a preset time.
Onboard Devices - Allows you to set resources or disable onboard system
devices.
Basic system information regarding system information, setup, power management, hardware,
and passwords is maintained in the Setup Utility held in the system ROM. The Setup Utility is
accessed by pressing the F10 key when prompted (on screen) to do so during the boot sequence.
If the screen prompt opportunity is missed, a restart will be necessary. For more information
about Setup Utilities refer to the Service Reference Guide.
Computer Setup Menu
File
Option/Description
System Information - Lists the following main system specifications:
•
•
•
•
•
•
Product name
SKU number (some models)
Processor type/speed/stepping
Cache size (L1/L2)
Installed memory size/speed/
channels
Integrated MAC Address
Power-On Options - Allows you to set:
• POST mode - QuickBoot, FullBoot, Clear Memory, FullBoot every x
days
• POST messages - Enable/disable
• F9 prompt - Enable/disable
• F10 prompt - Enable/disable
• F12 prompt - Enable/disable
• Factory Recovery Boot Support - Enable/disable
• Option ROM prompt - Enable/disable
• Remote wakeup boot source - Remote server/local hard drive
• After Power Loss - Off/on/previous state
• POST delay - None, 5, 10, 15, or 20 seconds
• Bypass F1 Prompt on Configuration Changes - Enable/disable
Execute Memory Test (some models) -Restarts computer and executes
POST memory test.
System Setup and Boot
Heading
OS Power Management - Allows you to enable/disable Runtime Power
Management, Idle Power Savings, ACPI S3 Hard Disk Reset, ACPI S3 PS2
Mouse Wakeup, USB Wake on Device Insertion (some models), Unique
Sleep State Blink Rates.
•
•
•
•
•
System BIOS
Chassis serial number
Asset tracking number
ME firmware version
Management node
PCI Devices - Lists installed PCI devices with their IRQ settings and allows
you to reconfigure IRQ or disable devices.
PCI VGA Configuration - Allows you to specify which VGA controller will
be used when multiple video adapters are available.
Bus Options (some models) - Allows you to enable/disable PCI SERR#
Generation and PCI VGA palette snooping.
Device Options - Allows you to set:
• Printer Mode - Bi-Directional, EPP & ECP, Output Only
• Num Lock state at power-on - off/on
• S5 Wake on LAN - enable/disable
• Multi-Processor - enable/disable
• Internal speaker - enable/disable
• Monitor Tracking - enable/disable
• NIC PXE Option ROM Download - enable/disable
Management Devices - Only displayed in Advanced menu when BIOS
detects multiple management options.
About - Displays copyright notice.
Set Time and Date - Allows you to set system time and date.
Flash System ROM - Allows you to select a drive containing a new BIOS.
Replicated Setup - Save to Rmv Media and Restore from Rmv Media
Default Setup
• Save Current Settings as Default
• Restore Factory Settings as Default
Management Operations - Allows you to set:
• MEBx Setup Prompt - enable/disable
• Intel Remote PC Assist Prompt - enable/disable
• Intel PC Assist Timeout - 5, 10, 15, 20, 30, 40, 50, 60, 120, 180, 240 seconds
• SOL Character Echo - enable/disable
• SOL Terminal Emulation Mode - enable/disable
• SOL Keyboard - enable/disable
• Unprovision AMT on next boot
Apply Defaults and Exit - Applies the selected default settings and clears
any established passwords.
Ignore Changes and Exit - Exits Computer setup without saving changes.
Save Changes and Exit - Saves changes to system configuration or default
settings and exits Computer Setup.
Storage
Device Configuration - Lists all installed BIOS-controlled storage devices.
The following options are available:
• CD-ROM
• Hard Disk
• Default Values
• SATA Defaults
• Translation Mode
• Removable Media Boot
• eSATA Port
• Max eSATA Speed
• SATA Emulation
DPS Self-Test - Allows you to execute self-tests on ATA hard drives.
Boot Order - Allows you to specify boot order.
• Shortcut to Temporarily Override Boot Order
8000 & 8080 Elite IPSM, CMT Chassis
600574-002
page 3
Password Security
Establishing a Setup or Power-On password:
Diagnostic LEDs
1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down >Restart.
LED
Color
LED Activity
State/Message
2. As soon as the computer is turned on, press F10 when the monitor light turns green to enter
Computer Setup. Press Enter to bypass the title screen, if necessary. If you do not press F10
when prompted, a restart will be necessary.
Power
Green
On
Computer on
Power
Green
1 blink every 2 seconds
Normal Suspend Mode
3. To establish a Setup password, select Security > Setup Password and follow the instructions
on the screen.
- or To establish a Power-On password, select Security > Power-On Password and follow the
instructions on the screen
Power
Red
1 blink every second followed
by a 2 second pause
CPU thermal shutdown
Power
Red
3 blinks, 1 blink every second
followed by a 2 second pause
Processor not installed
Power
Red
4 blinks, 1 blink every second
followed by a 2 second pause
Power failure (power supply overload)
Power
Red
5 blinks, 1 blink every second
followed by a 2 second pause
Pre-video memory error
1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart.
Power
Red
6 blinks, 1 blink every second
followed by a 2 second pause
Pre-video graphics error
To change the Setup password, go to step 2.
To change the Power-on password, go to step 3.
Power
Red
7 blinks, 1 blink every second
followed by a 2 second pause
System board failure (ROM
Power
Red
8 blinks, 1 blink every second
followed by a 2 second pause
Invalid ROM based on Checksum
Power
Red
9 blinks, 1 blink every second
followed by a 2 second pause
System powers on but is unable to boot
Power
Red
10 blinks, 1 blink every second
followed by a 2 second pause
Bad option card
Power
Red
11 blinks, 1 blink every second
followed by a 2 second pause
The current processor does not support
a feature previously enabled on this
system.
none
none
System does not power on and
LEDs are not flashing
System unable to power on
4. Before exiting, click File > Save Changes and Exit.
Changing a Setup or Power-On password:
2. To change the Setup password, as soon as the computer is turned on, press F10 when the
monitor light turns green to enter Computer Setup. Press Enter to bypass the title screen, if
necessary.
3. When the key icon appears, type your current password, a slash (/) or alternate delimiter
character, your new password, another slash (/) or alternate delimiter character, and your new
password again as shown:
current password/new password/new password.
NOTE: Type the new password carefully since the characters do not appear on the screen.
4. Press Enter.
The new password will take effect the next time the computer is restarted.
Deleting a Power-On or Setup password
1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart.
To delete the Setup password, go to step 2.
To delete the Power-On password, go to step 3.
2. To change the Setup password, as soon as the computer is turned on, press F10 when the
monitor light turns green to enter Computer Setup. Press Enter to bypass the title screen, if
necessary.
Common POST Error Messages
Screen Message
Probable Cause
Recommended Action
101-Option ROM Error
1. System ROM checksum
error.
1. Verify ROM, reflash if required
2. Expansion board option
ROM checksum
3. Clear CMOS memory, reboot
3. When the key icon appears, type your current password followed by a slash (/) or alternate
delimiter character as shown. Example: currentpassword/
4. Press Enter.
103-System Board
Failure
DMA, timers
164-Memory Size Error
and
201-Memory Error
Incorrect memory configuration
1. In Windows Explorer, go to C:\SWSetup\ISOs and burn the file Vision Diagnostics.ISO to a
CD or copy it to a USB flash drive.
2. While the computer is on, insert the CD in the Optical Drive or USB flash drive in a USB port
on the computer.
4. Turn on the computer. The system will boot into HP Vision Diagnostics.
NOTE: If the system does not boot to the CD in the optical drive or to the USB flash drive,
you may need to change the boot order in the Computer Setup (F10) utility.
5. At the boot menu, select either the HP Vision Diagnostics utility to test the various hardware
components in the computer or the HP Memory Test utility to test memory only.
NOTE: The HP Memory Test is a comprehensive memory diagnostic utility that is run as a
stand-alone application, outside of HP Vision Diagnostics.
6. If running HP Vision Diagnostics, select the appropriate language and click Continue.
1. Run Setup (F10).
2. Check DIMMs for proper
seating, type, and HP
compatibility.
3. Remove DIMMs singularly and
reboot to isolate faulty DIMM.
4. Replace system board.
214-DIMM Configuration Warning
Populated DIMM configura- Rearrange the DIMMs so that
tion is not optimized
each channel has the same amount
of memory.
301-, 304-Keyboard error
Keyboard failure.
501-Display Adapter
Failure
Graphics display controller.
3. Shut down the operating system and turn off the computer.
Check keyboard connection or
keys. Check connector for bent of
missing pins. Replace keyboard. If
304, possible system board problem.
1. Reseat graphics card.
2. Clear CMOS.
3. Check monitor connection.
4. Replace graphics card.
1720-SMART Hard Drive
Detects Imminent Failure
Hard drive is about to fail.
7. In the End User License Agreement page, select Agree if you agree with the terms. The HP
Vision Diagnostics utility launches with the Survey tab displayed.
Clearing CMOS
1. Determine if hard drive is
giving correct error message.
Enter Computer Setup and run
the Drive Protection System
test under Storage > DPS Selftest.
2. Apply hard drive firmware
patch if applicable.
1. Turn off the computer and any external devices, and disconnect the power cord from the
power outlet.
3. Back up contents and replace
hard drive.
2. Remove the chassis access panel.
5. Turn on the computer and allow it to start.
1. Clear CMOS memory.
3. Replace system board.
The Hewlett-Packard Vision Diagnostics utility allows you to view information about the hardware configuration of the computer and perform hardware diagnostic tests on the subsystems of
the computer. The utility simplifies the process of effectively identifying, diagnosing, and isolating hardware issues.
Use HP Vision Diagnostics to determine if all the devices installed on the computer are recognized by the system and functioning properly. Running tests is optional but recommended after
installing or connecting a new device.
To access HP Vision Diagnostics, you must create a Recovery Disc Set then boot to the CD containing the utility. It can also be downloaded from http://www.hp.com and either burned to CD
or installed to a USB flash drive.
4. Replace the chassis access panel and reconnect the power cord.
4. Replace system board
2. Remove expansion boards.
Hewlett-Packard Vision Diagnostics
3. On the system board, press and hold the CMOS button for 5 seconds.
2. Remove suspected card, reboot
1796-SATA Cabling Error One or more SATA devices
are improperly attached. For
optimal performance, the
SATA 0 and SATA 1 connectors must be used before
SATA 2 and SATA 3.
Ensure SATA connectors are used
in ascending order. For one
device, use SATA 0. For two
devices, use SATA 0 and SATA 1.
For three devices, use SATA 0,
SATA1, and SATA 2.
1801-Microcode Patch
Error
1. Upgrade BIOS to proper
version.
Processor not supported by
ROM BIOS.
2. Change the processor.
8000 & 8080 Elite IPSM, CMT Chassis
600574-002
page 4