Audiovox 1286808A Instruction manual

®
ELECTRONICS CORP .
D1705
PORTABLE 7" LCD MONITOR AND DVD PLAYER
For Customer Service
Visit Our Website At
WWW .audiovox.com
Product Information, Photos,
FAQ’s Owner’s Manuals
1286808
1
Notice:
This Product incorporates copyright protection technology that is protected by method claims of certain patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited viewing uses only unless authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
2
A. Introduction
Thank you for selecting the D1705 portable DVD player. The main
features include a 7" Wide Screen (16:9 Aspect Ratio) Liquid Crystal
Display (LCD) monitor and a DVD player. The unit applies the latest
state of the art electronics and is designed for use in hotels, offices
or your home. The unit is constructed to provide years of reliable,
trouble-free service, and is compact so that you can take it with you
anywhere and is designed for quick and easy installation. Please
read the entire instruction manual supplied with this product prior to
operation. The documentation will assist you in installing the system
properly to obtain the best equipment performance. Please retain
this manual for later use.
B. Cautions and Warnings
1. Placement
To prevent fire or electric shock, do not expose this appliance to
rain or moisture. Do not place the set on an unstable cart, stand,
tripod, bracket or table to prevent it from falling. Keep the unit away
from strong magnets, heat sources, direct sunlight, excessive dust.
If the unit is brought directly from a cold to a warm location, moisture may condense inside the unit. When you move it from a cold
to a warm location, wait for about one hour before operating the
unit, or remove the disc and leave the unit turned on until the moisture evaporates.
2. Installation
Ensure that the D1705 is installed in accordance with the instructions and illustrations provided in this manual.
3. Object and Liquid
Do not push objects of any kind into the unit through openings; do
not spill or spray liquid of any kind on or in the system (this may
result in a fire or electric shock). Do not place anything heavy on
the unit. To ensure proper ventilation and proper operation, never
cover or block the slots and openings with a cloth or other material.
4.Disassemble
Do not attempt to disassemble the cabinet. There is a risk of electric shock and/or exposure to Laser Radiation. Contact qualified
service personnel if your system is in need of repair.
3
5. Cleaning Unit
When cleaning, make sure the system is unplugged from the power
source. Do not use liquid cleaners or aerosol cleaners. Use a
cloth lightly dampened with water for cleaning the exterior of the
system only.
6. Disc
Do not use irregularly shaped discs such as heart or star-shaped
discs as they may cause the unit to malfunction. Do not stick paper, tape or glue on the disc. Do not expose the disc to direct sunlight or heat sources such as hot air ducts. Do not touch the surface of disc. Handle the disc by its edge. Clean the disc by wiping
the disc from the center out with a cleaning cloth. Remove the disc
from the unit and store it in its case after playing. Some playback
operations of discs may be intentionally fixed by software producers. Since this unit plays discs according to the disc contents the
software producers designed, some playback features may not be
available. Also refer to the instructions supplied with the discs.
C. Contents
1. 1 x 7.0’’ LCD Monitor & DVD Player Combo
2. 1 x AC to DC Adapter
3. 1 x Rechargeable Battery
4. 1 x Remote Control
5. 1 x Instruction Manual
6. 1 x Audio/Video Cable
7. 1 x Cigarette Lighter Adapter
D. Powering and installation
1. Powering the system indoors (Refer to Figure 1)
Plug one end of the AC to DC adapter into the DC 9V jack
on the left side of the main unit, then plug the other end into
the 110V AC power socket.
2. Powering the system in a car
Plug one end of the cigarette lighter adapter into the
DC 9V jack on the unit, then plug the other end into
the cigarette lighter socket.
4
AUDIO
DC 9V
V I D E O IN
OUT
1
BRIGHT.
2
Figure 1
E. Controls, Indicators, and Connectors
1. Unit View (Refer to Figure 2)
171819 20 21
15
16
22 23 24
26
1
2
3
14
13
12
4
5
6
7 8 9 10 11
Figure 2
5
1) Menu
2) Up button
3) Left Button
4) OK Button
5) Down Button
6) Right Button
7) Close disc cover point
8) Open Button
9) Previous Button
10) Stop Button
11) Next Button
12) Play Button
13) Pause Button
14) Screen Mode ( wide) Button
15) Remote Control Sensor
16) Power LED
17) DC 9V Input Jack
18) Audio Jack (L+R)
19) Video Jack
20) AV Input /Output Switch
21) Brightness Up/Down Thumbwheel
22) Power On/ Off Switch
23) Volume Up/Down Thumbwheel
24) Hi-Fi Headphone Jack
25) Coaxial Jack
26) Power Saving Mode Switch (Screen closed shut off switch)
27) Battery Catch
28) Battery Port
6
2. Remote Control View (Refer to Figure 3)
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
17)
18)
19)
20)
Display Button
Angle Button
Subtitle Button
Audio Button
Zoom Button
Up/Down/Left/Right/Enter Buttons
Return Button
A-B Button
Forward Button
Reverse Button
Slow Button
Stop Button
Number Buttons
Setup Button
Menu Button
Repeat Button
SKIPSKIP+
Play Button
Pause Button
Figure 3
F. Loading and Playing a Disc
a.
b.
c.
d.
e.
After connecting power to the unit, power on”DVD player” with
the power switch.
Open the disc tray by pressing OPEN , place a disc into the
tray with label side of disc facing up.
Close the tray by pressing “PRESS” button.The unit will load
the disc and go to the root menu. Start playback by pressing
“PLAY”.
Rotate the BRIGHT and VOLUME controls to adjust the picture
brightness and the DVD player’s volume.
To stop playing a disc, press STOP.
7
G. SETUP
Press ‘SETUP’ to display the Main screen of the SETUP Menu on
the screen. Press ‘SETUP’ again to exit the SETUP Menu.
.. General Setup Page ..
SPDIF Output
RAW
TV Display
PS
Angle Mark
Off
Screen Saver
Off
Last Memory
Off
Go To
General Setup Page
Figure 4. Main SETUP Menu Screen
1) Select ‘GENERAL SETUP’ using the Left /Right buttons, then
press ‘ENTER’ to enter the GENERAL Setup screen.
.. General Setup Page ..
SPDIF Output
RAW
SPDIF Off
TV Display
PS
SPDIF/RAW
Angle Mark
Off
SPDIF/PCM
Screen Saver
Off
Last Memory
Off
Setup SPDIF
Figure 5. General SETUP Menu Screen
a)Select “SPDIF Output RAW” use this option to select the audio
signal output from”Coaxial”port.
* SPDIF OFF: the digital signal Audio output will be off.
* SPDIF/RAW: the signal output from “COAXIAL” is RAW.
* SPDIF/PCM: the signal output from “COAXIAL” is PCM.
b)Select TV DISPLAY using UP/DOWN, and then press RIGHT
to enter the submenu. Select the TV display mode on the
screen using UP/DOWN, and press ENTER to confirm the
setting. Press LEFT to return.
* NORMAL/PS: When the player is connected to a normal
TV, and a wide picture is shown on the full screen.
* NORMAL/LB: When the player is connected to a normal TV,
8
and a wide picture is shown on the screen with a black strip
at both the top and bottom of the screen.
* WIDE: When the player is connected to a wide screen TV, a
wide picture is shown on the full screen.
.. General Setup Page ..
SPDIF Output
RAW
TV Display
PS
Nomal/PS
Angle Mark
Off
Normal/LB
Screen Saver
Off
Wide
Last Memory
Off
Set TV Display Mode
Figure 6. TV DISPLAY Screen Display
c). Select ‘ANGLE MARK’ using UP/DOWN, and then press
the RIGHT button to enter the submenu. Choose Angle
Mark on or off displayed on the screen using the UP/DOWN
and then press ENTER to confirm the setting. Press the
LEFT button to return.
.. General Setup Page ..
SPDIF Output
RAW
TV Display
PS
Angle Mark
Off
On
Screen Saver
Off
Off
Last Memory
Off
Set Angle Mark
Figure 7. ANGLE MARK Screen Display
* ON: The screen will show angle mark.
(*If angle option is available)
OFF: The screen will not display the Angle Mark
d). Select ‘SCREEN SAVER’ using UP/DOWN key,
.. General Setup Page ..
SPDIF Output
RAW
TV Display
PS
Angle Mark
Off
Screen Saver
Off
On
Last Memory
Off
Off
Screen Saver
Figure 8. SCREEN SAVER Display
9
*ON: screen saver on.
*OFF: screen saver off.
*NOTE The DVD player will enter the Screen Saver mode after 5
minutes if the image on the screen remains the same for more than 5
minutes.
e). Select “ Last Memory’ by Up/Down button
.. General Setup Page ..
SPDIF Output
RAW
TV Display
PS
Angle Mark
Off
Screen Saver
Off
Last Memory
Off
On
Off
Set Last Memory STATE
Figure 9. LAST MEMORY Screen Display
*on: The unit will retain the last position of playback in
memory. This feature is cancelled when power is turned off.
*off: The unit will not retain the last position of playback.
2) Select “Video quality” set up by using the left/right buttons, press
enter to enter the video quality set up page.
.. Video Quality
Brightness
Contrast
Hue
Saturation
Setup ..
00
00
00
00
Go To Video Setup Page
Figure 10. Main SETUP Menu VIDEO QUALITY
a).Select “Brightness by using the Up/Down buttons,then press
“Enter”. Adjust can change the Brightness by pressing the
left/right arrow buttons. When complete, press “Enter”
again to return to the “Video Quality” set up page.
10
.. Video Quality
Brightness
Contrast
Hue
Saturation
Setup ..
00
00
00
00
Brightness
Figure 11. BRIGHTNESS Screen Display
b). Select “Contrast” using the Up/Down buttons, then press
“Enter”. You can adjust the Contrast using the left/right buttons.
.. Video Quality
Brightness
Contrast
Hue
Saturation
Setup ..
-05
00
00
00
Contrast
Figure 12. CONTRAST Screen Display
When complete, press “Enter” again return to the”Video Quality” setup page.
c). Select “Hue” using the Up/Down buttons, then press Enter”.
You can adjust the Hue using the left/right buttons.
.. Video Quality
Brightness
Contrast
Hue
Saturation
Setup ..
-05
00
00
00
Hue
Figure 13. HUE Screen Display
When complete press “Enter” again to return to the “Video
Quality” setup page.
d). Select “Saturation” using the Up/Down buttons, then press
“Enter”. You can adjust the Saturation by using the left/right
buttons.
11
.. Video Quality
Brightness
Contrast
Hue
Saturation
Setup ..
-05
00
00
00
Saturation
Figure 14. SATURATION Screen Display
When complete, press “Enter”again to return to the “Video
Quality” setup page.
e) Press Setup button to exit “Video Quality” setup page.
3). With no disc in the player, select “password” using the left/
right buttons; then press Enter to enter the “Change Pass
word” page.
.. Password Setup Page ..
Password
Change
Change Password
Figure 15. PASSWORD CHANGE Screen Display
a) Press the right shift button to enter the Password Change
Submenu. Input the Old Password or the Default Password,
the New Password, and the Confirmed New Password.
Press ‘ENTER’ to confirm the change.
b) Press Setup button to exit “Video Quality” setup page.
Old Password
New Password
ConfirmPassword
OK
Figure 16. PREFERENCE PAGE Screen Display
12
NOTE: The Default Password is 3308. This password is always
effective even after you have selected your own
password and changed it. To avoid the possibility of
others using the default password to set the parental level
and change the password, you can record this default
password in another area and delete it from this manual.
Some discs can be limited depending on the age of users
while some discs can not.
4).With no disc in the player, select ‘PREFERENCES’ using the
left/right buttons; then press ‘ENTER’ to enter the preferences
page.
.. Preference Page ..
Audio
E N G Engliash
Subtitle
ENG French
Disc Menu
ENG
Chinese
Parental
Default
Japanese
Preferred Audio Language
Figure 17. AUDIO Preference Screen Display
a. Select ‘AUDIO’ using UP/DOWN, then press ‘RIGHT’
to enter the submenu. Select the audio language you desire
using UP/DOWN, then press ‘ENTER’ to confirm the
setting. Then press LEFT to return.
b. Select ‘SUBTITLE’ using UP/DOWN, then press RIGHT
to enter the submenu. Select the desired subtitle language or
SUBTITLE OFF using UP/DOWN, then press ‘ENTER’
to confirm the setting. Press ‘LEFT’ to return.
.. Preference Page ..
Audio
ENG
Subtitle
E N G Engliash
Disc Menu
ENG French
Parental
Default
Chinese
Japanese
Off
Preferred Subtitle Language
Figure 18. SUBTITLE Preference Screen Display
13
c. Select ‘DISC MENU’ using UP/DOWN, then press ‘RIGHT’
to enter the submenu. Select the Disc Menu Language you
desire using UP/DOWN, then press ‘ENTER’ to confirm the
setting. Press ‘LEFT’ to return.
.. Preference Page ..
Audio
ENG
Subtitle
ENG
Disc Menu
E N G Engliash
Parental
French
Default
Chinese
Japanese
Preferred Menu Language
Figure 19. DISC MENU Preference Screen Display
Note: Language and subtitle selection is only available for discs
that are recorded in the above listed languages. If the selected,
language is not available, the player will play and display on the
screen the original recorded language contained in the disc.
d. Select ‘PARENTAL’ using UP/DOWN, then press RIGHT
to enter the submenu.
.. Preference Page ..
Audio
ENG 1 KID SAF
Subtitle
ENG 2 G
Disc Menu
ENG 3 P G
Parental
4 PG 13
Default
6 R
7 Nc17
8 ADULT
Set Parental Control
Figure 20. PARENTAL Preference Screen Display
Select the parental level you desire using UP/DOWN for discs
with lock-out function or multiple rating levels. These are listed
from the lowest level (1 Child) to the highest level (OFF).
14
NOTE: Level 8 (Adult) is the default.
e. Select ‘DEFAULTS’ using UP/DOWN, then press RIGHT to
enter the submenu. Press ENTER to make the setting return
to the factory-set mode.
NOTE: The parental setting is not affected by the default
function.
.. Preference Page ..
Audio
ENG
Subtitle
ENG
Disc Menu
ENG
Parental
Parental
RESET
Load Factory Language
Figure 21. DEFAULT RESET Screen Display
Enter a 4 digit password, then press ‘ENTER’ to confirm the
parental level setting.
NOTE: For 1st time use the default password is 3308.
.. Password Setup Page ..
Password
Go To Password Setup Page
Figure 22. PASSWORD VERIFY Input Screen Display
15
1. Basic Operation
POWER
OPEN
PLAY
SLOW
PAUSE
STOP
NEXT
PREVIOUS
FORWARD
REVERSE
UP/DOWN/LEFT /RIGHT
ENTER
NUMBERS
RETURN
MENU
REPEAT
A-B
DISPLAY
ANGLE
SUBTITLE
AUDIO
ZOOM
SETUP
Turn the unit on/off
Remove/load the disc
Start Play/Execute item or setting
Play at 1/2, 1/4, 1/8 or 1/16 times speed
Still Picture
(1 time) Stop at the present playing point /
(2 times) Stop playing
Go to the next chapter, track or scene during play back
Go back to the preceding chapter, track or
scene during play back
Scan forward at 2, 4, 8,16 or 32x times
speed
Scan backward at 2, 4, 8, 16 or 32x times
speed
Used for Menu Navigation
Execute item or setting
Select item or setting
Return
Display the root menu of the disc
Repeat playing title, chapter, or track
Repeat a specific portion from point A to point
B of the disc
Display information (title, chapter, track,
time, etc.).
Change the angles on the scene
Select the subtitle language and turn it on/
off
Select the audio language
Enlarge an image to 2, 3, or 4 times the
original
Display the setup menu to select and set
items, and exit the setup menu.
16
2. MENU
A DVD is divided into sections called titles and chapters. When
you play a DVD, a root menu of the disc will appear on the screen
of your TV or Monitor. The contents of the menu vary from disc to
disc. Press MENU during playback to display the menu, and press
ENTER or PLAY to start playing. Some DVDs only allow you to
select disc playback options using the DVD menu.
3. DISPLAY (Display contents vary from disc to disc.)
1) PLAYING TIME AND REMAINING TIME
a. During playback press ‘DISPLAY’ to display the current Title
Number (1), the total Number of Titles (2), the current Chapter
Number (3), the total Number of Chapters (4), and the Playing
Time for the title (5). The heading will disappear automatically
after 3 seconds if no buttons are pressed.
Figure 23. Title, Chapter Number, and Time Screen Display
b. Press ‘DISPLAY’ again to display the Remaining Time of the
title. The heading will disappear automatically in about 3
seconds.
Figure 24. Title Remaining Time Screen Display
17
c. Press ‘DISPLAY’ the 3rd time to display the Elapsed Time for
the chapter. The heading will disappear automatically in about
3 seconds.
Figure 25. Chapter Elapsed Time Screen Display
d. Press ‘DISPLAY’ the 4th time to display the Remaining Time for
the chapter. The heading will disappear automatically after 3
seconds.
Figure 26. Chapter Remaining Time Screen Display
e. Press ‘DISPLAY’ a 5th time to exit. ‘DISPLAY OFF’ will be
displayed and will disappear automatically after 3 seconds.
2) ANGLE
During playback of a disc, press ‘ANGLE’ to display the avail
able angles for discs containing multi-angles*, with the current
angle number (1) and the total number of angles (2) displaying.
Press ‘ANGLE’ to select another angle, then press again to exit
and return to the normal viewing angle. The angle display will
disappear automatically if the ‘ANGLE’ button is not pressed
again within 3 seconds.
*NOTE: Not all discs contain this feature
18
Figure 27. Angle Screen Display
3) SUBTITLE
During disc playback press ‘SUBTITLE’ to select the subtitle language you desire*, with the current Subtitle Language Number
(1) and the total Number of Subtitle Languages (2) displayed. If
there are multiple languages press ‘SUBTITLE’ again to select
another subtitle language. To turn subtitles OFF, press the ‘SUBTITLE’ button until ‘SUBTITLE OFF’ is displayed. The Subtitle
display will disappear automatically if the ‘SUBTITLE’ button is
not pressed again within 3 seconds.
Figure 28. Subtitle Screen Display
*Some DVDs only allow access to this function through the DVD menu.
19
4) AUDIO
During playback press ‘AUDIO’ to select the audio language you
desire*, with the current Audio Channel Number (1) and the total
number of Audio Channels (2) displayed. Press AUDIO again to
select another audio language. The audio display will disappear
automatically if the ‘AUDIO’ button is not pressed again for 3
seconds.
Figure 29 Audio Language Screen Display
* Some DVDs only allow access to this function through the
DVD menu.
5) ZOOM
During playback press ‘ZOOM’ to enlarge the picture by 2x, 3x or
4X with the current zoom multiple. (1) Press “zoom” once; the
picture will be enlarged 2X. (2) Press “zoom” a second time; the
picture will be enlarged 3X. (3) Press “zoom”a 3rd time; the picture will be enlarged 4X. (4) Press “zoom” a 4th time, the picture
will return to normal.
Figure 30. ZOOM Screen Display
20
6) A-B REPEAT
a. During playback press ‘A-B’ to set the Starting
Point A.
Figure 31. A-B Repeat Starting Point Screen Display
b. Press ‘A-B’ a second time to set the Ending Point B and
the player will repeatedly play the part between Point A and
Point B
Figure 32. A-B Repeat Ending Point Screen Display
c) Press A-B a third time to cancel A-B repeat and resume playback from point A.
Figure 33. A-B Repeat Cancelled Screen Display
21
7) REPEAT
a. During playback press ‘REPEAT’ once to repeatedly play the
current chapter.
Figure 34. Chapter Repeat ON Screen Display
b. During playback press ‘REPEAT’ a second time to repeatedly
play the current title.
Figure 35. Title Repeat ON Screen Display
c. During playback press ‘REPEAT’ a 3rd time to repeat all
Chapters and Titles. The ‘REPEAT ALL’ screen will disappear
automatically if the ‘REPEAT’ button is not pressed again for
3 seconds.
Figure 36. Title Repeat ON Screen Display
22
d. Press “REPEAT” a fourth time to resume normal playback.
Figure 37. Repeat Off Screen Display
4. PLAYING AUDIO CDS
When playing an audio CD. Press the DISPLAY button on the remote
to display the DISPLAY Banner. The options below show you what
happens when you press the DISPLAY button.
a. During playback press ‘DISPLAY’ once and SINGLE
ELAPSED will appear along with the current track
playing and the time of that track.
Figure 38. SINGLE ELAPSED Screen Display
b. Press ‘DISPLAY’ a second time and SINGLE REMAIN
appears along with the current track playing the amount
of time left on the track.
Figure 39. SINGLE REMAIN Screen Display
23
c. Press ‘DISPLAY’ a third time and TOTAL ELAPSED
appears along with the current track playing and the total
time that the CD has been playing.
Figure 40. TOTAL ELAPSED Screen Display
d. Press ‘DISPLAY’a fourth time and TOTAL REMAIN appears
along with the current track playing and the amount of time
remaining on the CD.
Figure 41. TOTAL REMAIN Screen Display
e. Press ‘DISPLAY’ a fifth time and “ DISPLAY OFF” will appear
momentarily then disappear. The CD time Information will
not be displayed.
1) USING THE REPEAT FEATURE
The default mode for the Repeat feature is OFF. Pressing REPEAT
consecutively changes the repeat options:
•
TRACK- repeats the track that is playing.
•
ALL- repeats the disc that is playing.
•
OFF
As you toggle through the options, the repeat option changes. The
selected repeat option loops repeatedly until you turn it off.
24
5. PLAYING MP3 DISCS
MP3 is a format for storing digital audio. An audio CD-quality song is
compressed into the MP3 format with very little loss of audio quality
while taking up much less disc space. CD-R /RW discs that have been
encoded in MP3 format are compatible with this system.
Playback modes:
FOLDER (normal playback)
SINGLE
REPEAT ONE (repeat playback of a song)
REPEAT FOLDER (repeat playback of a specific folder)
1. Insert an MP3 CD, the DVD video player will initialize the disc
and the directory will be shown on the monitor.
Figure 42. MENU Screen Display
When an MP3 disc is inserted into the unit, the menu screen appears
automatically. You can use the menu screen to change folders and
songs. The system plays the songs in the order they were burned
onto the disc.
1. Press the
or button to choose a folder from the folder list
on the left side of the screen.
2. Press ENTER to select the highlighted folder. The songs available in that folder will be listed on the right side of the screen.
3. Press the Right ( ) button to enter the track list.
4. Press the or button to choose a song from the list. Press
ENTER to select and begin playback of the highlighted song.
25
SKIPPING SONGS
Use the
( NEXT ) button to move to the next song. Press the
(PREVIOUS) button to move to the beginning of the previous song.
USING THE REPEAT FEATURE
The default mode for the Repeat feature is OFF. Pressing REPEAT
consecutively changes the repeat options:
•
FOLDER
•
SINGLE
•
REPEAT ONE
•
REPEAT FOLDER
Press REPEAT a 3rd time to resume normal playback. As you toggle
through the options, the repeat option changes. The selected repeat
option loops repeatedly until you turn it off.
26
NOTICE
The upper left column is a list showing the name of folder. The upper
right column is a list showing the name of song and the sub-folder.
“
“ sign in front of a file name indicates that this is a folder, not an
MP3 file.
“MP3” sign in front of a file name indicates that this is a MP3 file.
During MP3 playback, you cannot access “PLAY MODE”, folders or
songs.
You are allowed a maximum of 11 characters for each folder or/and
songs.
6. Playing JPG file
1). Load the JPG Disc into tray
2). Select the JPG file by pressing the “ Up/Down” buttons.
3).You can preview the JPG file by pressing “Play” or “OK”.
4). Press the left or right buttons to rotate the image in 90-degree steps.
5). Press the up or down buttons to rotate the image 180 degrees.
6). While you preview the JPG file, press “display”; there are different
refresh modes available.
6.1) WIPE TOP
refresh from top side
6.2) WIPE BOTTOM
refresh from bottom side
6.3) WIPE LEFT
refresh from left side
6.4) WIPE RIGHT
refresh from right side
6.5) DIAGONAL WIPE
refresh from left top
LEFT TOP
6.6) DIAGONAL WIPE
refresh from right top
RIGHT TOP
6.7) DIAGONAL WIPE
refresh from left bottom
LEFT BOTTOM
27
6.8)
refresh from right bottom
DIAGONAL WIPE
RIGHT BOTTOM
6.9)
EXTEND FROM CEVTER H refresh from center
horizontally to both sides
6.10) EXTEND FROM CEVTER V refresh from center
vertically to both sides
6.11) COMPRESS TO CEVTER H refresh compress from
center horizontally
6.12) COMPRESS TO CEVTER V refresh compress from
center vertically
6.13) WINDOW H
refresh from four window’s left
6.14) WINDOW V
refresh from four window’s right
6.15) WIPE FROM EDGE TO CENTER refresh from edge to center
7. When previewing the file, pressing “ANGLE,SUBTITLE,AUDIO,
NUMBER, AB,RETURN,REW/FF, or SLOW” causes a hand
icon (invalid function) to appear on the display.
8. When pressing the first time during preview, “SLIDE SHOW
MENU” will display on the screen.
9. Then press ”PLAY”or”OK”, the left top photo will be previewed.
10. You can return to the root Menu by pressing the Menu button.
7. Playing a Video Game (Refer to Figure 38)
1. Slide the AV in/out switch to the “In” position.
2. Plug the video output from your game system into the supplied A/V
adapter cable and plug the adapter cable into the Audio (black) and
video (yellow) jacks on the left side of the unit. Adjust the volume
28
control and the brightness control on the monitor for individual
preference.
Figure 43
8. Connecting to a TV or another monitor ( Refer to Figure 38)
You can also connect the DVD player to a TV to enjoy high quality
stereo sound or another monitor.
1. Slide the AV in/out switch to the “out” position.
2. Connect one end of the audio/video cable’s black (1/8” stereo
plug) plug into the unit’s DVD AUDIO OUT jack, and connect
the other end to the AUDIO INPUT jacks on your TV or Monitor
(white = left channel, red = right channel).
3. Connect the audio/video cable’s yellow plug into the VIDEO
OUT jack on the side of the unit, and the other yellow plug to
the VIDEO INPUT jack on your TV or Monitor.
9. Connecting Coaxial Output
The coaxial output of the unit can be used with an optional cable that
has a stereo 1/8 inch male connector and a male RCA connector. The
output of cable can be aplied to any device which accepts a digital
coaxial signal.
29
10. Specifications
Disc format: DVD/CD/MP3
Color system: NTSC
Screen size: 7.0’’
DVD video format: Horizontal 720 pixel, vertical 480 pixel (NTSC)
Frequency response: DVD (PCM 96 kHz/24 bits ): 20 Hz to 44 kHz
DVD (PCM 48 kHz): 20 Hz to 22 kHz
CD: 20 Hz to 20 kHz
Video output: 1.0 Vp-p/75 Ohm, unbalanced
Video S/N: Better than 35 dB
Audio output: 2 x 0.4 W
Audio S/N: Better than 35 dB
Power source: DC 9V
Power consumption: 14 W
Operating temperature: 5~40°C (41~104°F)
Storage temperature: -20~60°C (4~140°F)
Operating humidity: 10~75%
Dimensions (W x H x D):8.07 X 5.92 X1.98inches
205 x 150.5 x 35.5mm
Battery Type: Lithium Ion (Li-ION)
11. Rechargeable Battery Installation and Use
The player utilizes a set of long-life NiMH batteries for portable power
supply. The Li-ION battery pack is specially designed for your player,
please consult your dealer for purchasing the battery pack. Li-ION batteries feature high storage capacity and low level of degradation. This
means the Li-ION batteries doesn’t have “Memory Effect” and thus can
be recharged safely regardless of whether the battery is fully or only
partially spent. Please fully charge the battery prior to first use.
30
NOTE: When the DVD player is used with the battery as a power source,
ensure that the battery has been charged for at least eight hours prior to
connecting it to the DVD player.
If you plan to not use the battery for an extended period of time (say, one
week or longer), we recommend that you first fully charge the battery
and store it away properly. For longer periods of storage, please recharge the battery at least once every two months to maintain the
battery in its best condition. Please under no circumstances short out
the battery, store the battery in a metal container, or leave the battery in a
humid or damp environment. Ideally, store the battery in an airtight container with desiccant or other dehumidifying agent. Each full recharge
takes approximately five-hours and one full charge can provide power
the player for approximately 3 hours.
During recharge, the light next to the DC power input will light up red.
Once fully recharged, the light will turn green. At this point you may remove the wall plug and cease charging.
Precautions related to Battery Recharge:
1. Once the battery has been fully spent, please immediately recharge
the battery (regardless of whether you plan to use battery power
again soon) in order to maximize battery life.
2. To charge the battery, please connect the power jack directly into
the LMD-3708 and leave the POWER switch in the off position.
Using and Maintaining your Rechargeable Batteries
1. Please make sure you always use only the AC transformer included
with the player to recharge your batteries.
2. Recharge effectiveness will degrade when environmental temperatures drop below 50oF (10oC) or exceed 95oF (35oC).
3. Please remove battery from the player and store properly if the player
is not to be used for an extended period of time. For periods of two
months or more, please recharge the battery at least once every
two months to avoid irreparable damage to the battery. If the battery
31
left attached to the player for an extended period, please recharge the
battery at least once every two weeks.
4. Avoid unnecessarily recharging fully charged batteries.
Installing the Battery Pack:
1. First, make sure the player is in “Stop” mode and that the AC power
supply has been disconnected.
2. Close the player cover.
3. Align the battery pack with the player module’s front edge.
4. Push the battery towards the rear of the player until it locks into
position. The lock position is indicated by a click. The unit will fit snugly
to the player.
BATTERY
Figure 44. Installing the DVD Player Battery
Removing the Battery Pack:
1. First, make sure the player is in “Stop” mode and that the AC power
supply has been disconnected.
2. Press the release button in the down direction.
3. Slide the battery towards the front of the unit.
FRONT OF PLAYER
BATTERY
RELEASE BUTTON
Figure 45. Removing the DVD Player Battery
32
90 DAY LIMITED WARRANTY
Applies to Audiovox Video Products
AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and
conditions, be proven defective in material or workmanship within 90 days from the date
of original purchase, such defect(s) will be repaired or replaced with reconditioned product
(at the Company's option) without charge for parts and repair labor.
To obtain repair or replacement within the terms of this Warranty, the product is to be
delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s),
transportation prepaid, to the Company at the address shown below.
This Warranty does not extend to the elimination of externally generated static or noise,
to correction of antenna problems, to costs incurred for installation, removal or reinstallation of the product, or to damage to tapes, discs, speakers, accessories, or electrical
systems.
This Warranty does not apply to any product or part thereof which, in the opinion of the
Company, has suffered or been damaged through alteration, improper installation,
mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial
number/bar code label(s). THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS
WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND,
IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE
PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL
BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR
BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 30 MONTHS FROM
DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR
ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY
OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No person or representative is authorized to assume for the Company any liability other than expressed herein
in connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion
or limitation of incidental or consequential damage so the above limitations or exclusions
may not apply to you. This Warranty gives you specific legal rights and you may also have
other rights which vary from state to state.
U.S.A. : AUDIOVOX ELECTRONICS CORPORATION, 150 MARCUS BLVD.,
HAUPPAUGE, NEW YORK 11788 l 1-800-645-4994
CANADA : CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION
SERVING YOUR AREA
33
128-5556C