VIZIO
QUICK START GUIDE
Model: S4221w-C4
IMPORTANT SAFETY INSTRUCTIONS
Your Unit is designed and manufactured to operate within defined design limits, and misuse may result in electric
shock or fire. To prevent your Unit from being damaged, the following rules should be observed for its installation, use,
and maintenance. Please read the following safety instructions before operating your Unit. Keep these instructions
in a safe place for future reference.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
• The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert
the user to the presence of un-isolated, dangerous voltage within your Unit that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
h
• The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and servicing instructions in the literature accompanying
your Unit.
• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
• The wall socket should be located near your Unit and be easily accessible
• Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water penetrates into your Unit,
unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.
• Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord
and contact your dealer immediately. Do not try to repair your Unit yourself.
• Avoid using dropped or damaged appliances. If your Unit is dropped and the housing is damaged, the internal
components may function abnormally. Unplug the power cord immediately and contact your dealer for repair.
Continued use of your Unit may cause fire or electric shock.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or
the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
• Do not install your Unit in an area with heavy dust or high humidity. Operating your Unit in environments with
heavy dust or high humidity may cause fire or electric shock.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
• When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord may damage the wires
inside the cord and cause fire or electric shock. When your Unit will not be used for an extended period of time,
unplug the power cord.
• Only use attachments/accessories specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
• Ensure that the power cord and any other cables are unplugged before moving your Unit.
• To reduce risk of electric shock, do not touch the connector with wet hands.
• Insert the remote control battery in accordance with instructions. Incorrect polarity may cause the battery to leak
which can damage the remote control or injure the operator.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• See the important note and rating located on the bottom of the unit.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
• WARNING - This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled
with liquid near the equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain, or moisture.
• To reduce the risk of electric shock or component damage, switch off the power before connecting other
components to your Unit.
• Do not leave the battery exposed to direct sunlight for a long period of time with doors and windows closed. Do
not disassemble the battery or dispose of it in fire.
• Unplug the power cord before cleaning your Unit. A damp cloth is sufficient for cleaning. Do not use a liquid or a
spray cleaner on your Unit. Do not use abrasive cleaners.
• Disconnect the mains plug to shut off when you experience trouble or the device is not in use. The mains plug
shall remain readily operable.
• Always use the accessories recommended by the manufacturer to insure compatibility.
• When moving your Unit from an area of low temperature to an area of high temperature, condensation may
form in the housing. Wait before turning on your Unit to avoid causing fire, electric shock, or component damage.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable
operation of your Unit and to protect it from overheating, be sure these openings are not blocked or covered. Do
not place your Unit in a bookcase or cabinet unless proper ventilation is provided.
• Never push any object into the slots and openings on your Unit enclosure. Do not place any objects on the
top of your Unit. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your Unit.
• The power cord must be replaced when using different voltage than the voltage specified. For more information,
contact your dealer.
• When connected to a power outlet, power is always flowing into your Unit. To totally disconnect power, unplug
the power cord.
• CAUTION - Danger of explosion or fire if battery is mistreated. Replace only with the same or specified type.
TABLE OF CONTENTS
Package Contents....................................................................4
Controls & Connections...........................................................5
FIrst-Time Setup.........................................................................8
Using the Remote......................................................................13
Adjusting Sound Bar Settings...................................................14
Program Remote.......................................................................16
Reset to Factory Default Settings..............................................17
Re-linking the Subwoofer with Sound Bar................................18
Bluetooth Pairing.......................................................................19
Using Bluetooth Mode..............................................................20
Advanced Setup......................................................................21
Installing the Cable Management Tie.....................................22
Wall Mounting the Sound Bar..................................................23
Help & Troubleshooting............................................................25
One-Year Limited WArranty.......................................................30
Legal & Compliance................................................................31
PACKAGE CONTENTS
VIZ IO
INPUT
High Definition Sound Bar with
Wireless Subwoofer
MENU
Remote Control
with Batteries
This Quick
Start Guide
2 x Power
Cables
Stereo RCA to 3.5mm
Audio Cable
Coaxial Audio
Cable
Digital Optical
Cable
2 x Sound Bar Wall
Mount Brackets
2 x Wall
Mount Screws
(Size: M4 x 10)
Wall Mount
Template
Cable
Management Tie
4
CONTROLS & CONNECTIONS
Back of Sound Bar
Power Port
(USB 5)
USB Port
(Digital 3)
(Aux 1)
Coaxial In
Analog Audio In
(Optical 4)
(Aux 2)
Digital Optical
Analog Audio In
Audio In
5
Back of Sound Bar
Control Buttons are located here:
Power
Input
Bluetooth Input
(Hold to force pair, See “Bluetooth Pairing” on page 19)
+
-
6
Volume
Back of Subwoofer
Pairing Button
LED Indicator
Power Switch
Power Port
7
FIRST-TIME SETUP
1
Connect one of the
included cables to ONE TV
audio output as shown.*
BETTER
DIGITAL OPTICAL
CABLE**
Connection ports are located here:
BETTER
GOOD
DIGITAL COAXIAL
CABLE**
3.5MM TO
RCA CABLE
GOOD
3.5MM TO
RCA CABLE
CHOOSE ONE CABLE:
BETTER
GOOD
AND CONNECT IT TO YOUR TV
*Not all TVs have the audio outputs shown above. To connect the Sound Bar directly
to your other devices (Blu-ray player, game system, etc) see your device’s user manual.
8
**When using either of the Digital Inputs, if there is no audio: (A) try setting the TV
output to PCM or (B) Connect directly to your Blu-ray/other source, some TVs do not
pass through digital audio.
2
Connect a Power Cable to
the Sound Bar.
3
Plug the Power Cable into
a Power Outlet.
9
BACK OF SUBWOOFER
4
Connect a Power Cable
to the Subwoofer.
5
Plug the Power Cable into
a power outlet.
6
Flip the Power Switch into
the On position.
10
7
Sound Bar is centered
below the TV.
For the best surround sound experience, position the Sound Bar and Subwoofer as shown.
The Sound Bar should be close to ear level.
11
9
Top
10
Remove the battery cover
by gently sliding it away
from the remote.
11
Top
Insert the included batteries
and gently slide the battery
cover back into place.
Turn your TV on, then press the Power button
on the remote to turn the Sound Bar on.
VI ZI O
Input
Press the Input button to switch between
audio sources. For example, if you
connected your TV to Input 1, set the Sound
Bar to Input 1.
Hardware Setup is complete.
12
INPUT
MENU
Power
USING THE REMOTE
Display
Displays Sound Bar settings
VIZIO
Input
Press to change input source.
Up/Down
Press to cycle through settings
and options.
INPUT
Menu
Press to access the menu settings.
Power
Press to turn on or off.
MENU
Enter/Play/Pause
Press to select an option.
Press to Play or Pause.
Previous
Press to return to previous track.
Next
Press to skip to the next track.
(Changes audio settings in Menu)
(Changes audio settings in Menu)
Volume Press to decrease volume.
Volume +
Press to increase volume.
Mute
Press to mute/unmute.
13
ADJUSTING SOUND BAR SETTINGS
LED Indicators are located here:
Press the Menu button and use the Up/Down Arrow buttons on the remote to access the different functions and acoustic settings
of the Sound Bar. Each function and setting will be displayed on the remote control’s LCD display. The LED Indicators will behave
differently with each function.
Function
LED Behavior
Bluetooth Pairing
(When searching for device)
Flash from Left to Right
and back continuously.
BT Pair
Bass Levels
Bass
Treble Levels
Treble
Dialog Levels
Dialog
Surround Levels
Surround
Description
Press the Enter button on the remote. The Sound Bar will be discoverable for
15 minutes. You can now search for the Sound Bar (VIZIO S4221w) using your
Bluetooth Device. The sound bar will power down if no device is found.
Note: Set your Bluetooth device into pairing mode prior to the Sound Bar.
Two center LEDs
indicate Bass level 0.
Press the Next/Previous button to increase/decrease the bass level. The LED
indicators will move to the right with increasing levels and to the left with
decreasing levels.
Two center LEDs
indicate Treble level 0.
Press the Next/Previous button to increase/decrease the treble level. The
LED indicators will move to the right with increasing levels and to the left with
decreasing levels.
Two center LEDs
indicate dialog is
centered.
Press the Next/Previous button to increase/decrease the presence of dialog
in the virtual center channel. The LED indicators will move to the right when
the dialog presence is increased and to the left when the dialog presence is
decreased.
Two center LEDs
indicate surround is
centered.
Press the Next/Previous button to increase/decrease the virtual surround sound
level. The LED indicators will move to the right with increasing levels and to the
left with decreasing levels.
Note: DTS TruSurround must be On to adjust the surround level.
14
Function
LED Behavior
Description
Subwoofer Levels
Two center LEDs
indicate Subwoofer
level 0.
Press the Next/Previous button to increase/decrease the level of the subwoofer.
The LED indicators will move to the right with increasing levels and to the left
with decreasing levels.
Subwoofer
DTS TruSurround
On/Off
Surround On:
Surround Off:
Surnd
DTS TruVolume
On/Off
TruVol
TruVolume On:
TruVolume Off:
Night Mode On/Off
Night Mode On:
Night
Night Mode Off:
TV Remote
VZtv Rmt
TV Remote On:
On
TV Remote Off:
Eco Power On/Off
Eco Power On:
EcoPwr
Eco Power Off:
On
Program Remote
Prg Remote
No
Press the Next/Previous button to enable/disable TruVolume. When enabled
(On), TruVolume provides a consistent and comfortable volume level for a more
enjoyable listening experience.
Press the Next/Previous button to enable/disable Night Mode. When enabled
(On), the Sound Bar will lower bass frequency levels to provide a more quiet
environment (ideal for apartment living and homes with sleeping children).
Press the Next/Previous button to enable/disable VIZIO TV Remotes. When
enabled (On), you can use a VIZIO TV remote control to turn on the Sound Bar
(using the TV Volume Up button) and control volume.
Press the Next/Previous button to enable/disable Eco Power Mode. When enabled
(On), the Sound Bar will go into standby after a period of inactivity. The sound bar
will automatically turn off when no audio signal is detected. Off disables this feature.
Note: Enable this function if using a TV remote to control the sound bar.
---
Press the Next/Previous and Play buttons to toggle and select and program
your TV remote to control the Volume Down, Volume Up, and Mute functions on
your Sound Bar. See “Program Remote” on page 16 for more information.
---
Press the Next/Previous and Play buttons to select and reset your remote and
Sound Bar to the factory default settings. All paired Bluetooth devices will be
unpaired. All programmed IR remotes will also be removed. See “Reset to Factory
Default Settings” on page 17 for more information.
Reset
Reset
Press the Next/Previous button to enable/disable DTS TruSurround. When
enabled (On), all inputs will produce virtual surround sound. When disabled
(Off), all sources will playback in 2.1 stereo.
15
PROGRAM REMOTE
You can program your Sound Bar to accept TV remote IR commands. Press the Menu button on the remote, then use the Up/Down
buttons to navigate to Prg Remote. Use the Next/Previous buttons to toggle through Learn Vol -, Learn Vol +, and Learn Mute.
Function
LED Behavior
Learn Volume
Down
Learn
Vol -
(Waiting to learn)
Flash from Left to Right
and back
continuously.
Learn Volume
Up
Learn
Vol +
All of the LEDs will
blink twice to confirm.
Description
Press the Play button to put the Sound Bar into learning mode.
While the Sound Bar is in learning mode, press the Volume
Down, Volume Up, or Mute button on the TV remote control.
All of the LED Indicators on the Sound Bar will flash two times
indicating that it has successfully recognized the TV remote.
Learn Mute
Learn
Mute
Note: When using this function,
turn off your TV speakers. Refer to
your TV’s user manual for more
information.
Ensure that both the Sound
Bar and TV remotes are
pointed at the front of the
Sound Bar.
VIZIO
INPUT
MENU
TV Remote
16
RESET TO FACTORY DEFAULT SETTINGS
Function
LED Behavior
Description
Reset
To reset the Sound Bar to factory default settings:
Reset No
1. Press the Menu button on the remote control.
Reset Yes
ConfirmYes
Confirmed
All Indicator LEDs
will flash three
times confirming
factory reset.
2. Use the Up/Down buttons to navigate to Reset No.
3. Press the Next button to navigate to Reset Yes and press the
Play button.
4. ConfirmYes is displayed. Press the Play button to continue.
5. Confirmed is displayed. All of the Indicator LEDs on the
sound bar will flash three times confirming the reset.
17
RE-LINKING THE SUBWOOFER WITH SOUND BAR
Your Subwoofer has already been paired with your
Sound Bar by VIZIO. However, you may need to pair
the Subwoofer to the Sound Bar if there is no sound
coming from the Subwoofer.
What does pairing mean?
Pairing means to wirelessly connect.
1
2
Back of Sound Bar
Back of Subwoofer
First confirm that the power switch is in the ON position.
Press and hold the Power button on the back of the
Sound Bar for 5 Seconds. The LED indicators on the front
will flash 3 times. The Subwoofer is now linked with the Sound Bar.
Press and hold the Pairing button on the back of the
Subwoofer for 5 seconds. The LED on the back of the
Subwoofer will begin to blink.
18
BLUETOOTH PAIRING
To pair the Sound Bar with a Bluetooth device:
1. Press and hold the Bluetooth button on the Sound Bar for five (5) seconds or use the BT Pair menu option from the
remote (see “Adjusting Sound Bar Settings” on page 14). When the Sound Bar is in Bluetooth Pairing Mode, the LED
Indicators on the Display Panel on the front of the Sound Bar will light sequentially from left to right and back again.
Once the device is paired, the LED Indicators will stop flashing.
2. You can now search for the Sound Bar (VIZIO S4221w) using your Bluetooth device. For more information, see the
documentation that came with your device.
3. Play audio from your Bluetooth device. Volume can be controlled on your source device and
the Sound Bar.
Back of Sound Bar
19
USING BLUETOOTH MODE
Your Sound Bar supports music streaming from smartphones, tablets, and computers with Bluetooth capability.
Device compatibility will vary, see your device’s documentation for more information. Once you have paired your
source device to the Sound Bar, as long as you stay within range of the Sound Bar, your device should remain
paired, even if you change the input on the Sound Bar.
Your Sound Bar is not equipped with a microphone, so it cannot operate as a hands-free
device for a smartphone.
Maximizing Signal
A Bluetooth signal has a range of up to 30 feet. Keep in mind that Bluetooth is a compressed audio format, so
streamed music may lose some integrity when compared to a wired connection.
Try the following if your sound quality is less than optimal:
•
If you hear any break-up or disconnect while streaming music from your device, move the source device
closer to the Sound Bar.
•
Be sure that there are no solid obstructions in the line-of-sight between the Sound Bar and the source
device.
• Other wireless devices can affect Bluetooth range, including wireless security cameras, wireless
video baby monitors, cordless phones, and microwave ovens. Turning off or moving these devices
may improve Bluetooth range.
Reduce the volume levels on your device and on the Sound Bar before pressing Play. High volume
levels can damage your hearing.
20
ADVANCED SETUP
Connect up to five (5) different devices
to the Sound Bar (devices shown are
examples-you can use any device).
Connection ports are located here:
To listen to a device, change the input
source on the Sound Bar.
Optical, Coaxial, and 3.5mm cables
transmit audio only. If connecting a
video device, you will need a separate
video connection from the device to
your TV.
USB
THUMB DRIVE*
DIGITAL OPTICAL
CABLE
Game Console
*Supports .WAV file format playback only
DIGITAL COAXIAL
CABLE
Network Media Player
21
3.5mm AUDIO
CABLE
RCA AUDIO
CABLE
Tablet/MP3 Player/Laptop
INSTALLING THE CABLE MANAGEMENT TIE
The Cable Management Tie can be used to organize the input and power
cables behind the sound bar.
1.
Place the Sound Bar face down on a non-marring or soft flat level surface.
2.
Insert the Tie into the hole on the center of the Sound Bar.
3.
Insert the Pin into the Tie to secure the Cable Management Tie.
4.
To remove the Cable Management Tie, remove the Pin and gently pull the Tie.
22
Pin
Tie
WALL MOUNTING THE SOUND BAR
1
Back of Sound Bar
Wall-Mount
Screw Holes
Insert and tighten two Wall-Mount Screws with a Phillips-head
screwdriver into the Wall-Mount Screw Holes.
2
Place the included wall mounting template against the wall
under your TV. Mark the four bracket holes using a pencil.
23
3
Be sure your screws are attached
to wood studs or drywall anchors
(for drywall) or concrete anchors
(for brick/concrete walls). Wall
mounting hardware is not included.
15.75 in
(400 mm)
Wall Mount Screw
Screw Size: M4 x 10
If you are unfamiliar with power tools or the layout of
electrical wiring in the walls of your home, consult a
professional installer.
24
HELP & TROUBLESHOOTING
There is no power.
• Press the POWER button on the remote control or on the top of your Sound Bar.
• Ensure the power cord is securely connected.
• Plug a different device into the electrical outlet to verify that the outlet is working correctly.
There is no sound.
• Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar.
• Press MUTE on the remote to ensure the Sound Bar is not muted.
• Press INPUT on the remote or on the top of your Sound Bar to select a different input source.
• When using either of the Digital Inputs, if there is no audio: (A) try setting the TV output to PCM or (B) Connect directly to
your Blu-ray/other source, some TVs do not pass through digital audio.
• Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or STANDARD, not
VARIABLE. Consult your TV’s user manual for more detailed information.
• If using Bluetooth, ensure that the volume on your source device is turned up and that the device is not muted.
I hear buzzing or
humming.
• Ensure all cables and wires are securely connected.
• Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not, the problem may
be with the original device.
• Connect your device to a different input on the Sound Bar.
The remote
isn’t working.
• Replace the remote batteries with new ones.
• Point the remote directly at the Sound Bar when pressing a button.
• If using a Bluetooth connection, some of the buttons on the remote may not be supported by the streaming
application. (e.g., Pandora doesn’t support the Back button.)
There is no sound
coming from the
Subwoofer.
• If the light on the Subwoofer is blinking in a slow pattern, you will need to pair the Subwoofer with the Sound Bar. See
“Re-linking the Subwoofer with Sound Bar” on page 18.
• Move the Subwoofer closer to the Sound Bar.
• Turn the Subwoofer power switch to ON.
• To conserve power, the Subwoofer will automatically enter a low power state when not in use. It may take up to 10
seconds for the Subwoofer to link after the Sound Bar is turned on.
25
DO YOU HAVE QUESTIONS?
LET US HELP!
YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT
The VIZIO support team is highly
trained and is based in the
United States.
We can help with:
• New Product Setup
• Connecting Your Devices
• Technical Problems
• And More
Phone: (877) 878-4946 (TOLL-FREE)
Email: techsupport@VIZIO.com
Web: http://store.VIZIO.com/support
Hours of operation: Monday - Friday: 5 am to 9 pm (PST)
Saturday - Sunday: 8 am to 4 pm (PST)
We speak English • Se habla Español • Nous parlons Français
VIZIO RECOMMENDS
Introducing the new E-series slim frame design. The VIZIO E-series LED TV is shattering the mold in a
way only VIZIO can, with high-quality design and picture at the best value. With a stunningly slim outer
frame design – and LED with 1080p Full HD for rich colors and vivid details, this HDTV gives you the best
picture at the best value.
Available at www.VIZIO.com
This Product Sold Separately
VIZIO RECOMMENDS
The VIZIO Co-Star™ Stream Player merges live TV and streaming entertainment into one experience,
turning any HDTV into the ultimate smart TV. Using the latest version of Google TV™, Co-Star decks out
your existing HDTV with apps, full-screen Web browsing and the best in streaming entertainment. And
with 1080p Full HD resolution, built-in Wi-Fi, and 3D-readiness, VIZIO Co-Star is the ultimate entertainment
upgrade for any high-definition television.
Available at www.VIZIO.com
This Product Sold Separately
VIZIO RECOMMENDS
THE ULTIMATE
ULTRABOOK™
14” THIN+LIGHT
With uncompromising performance, and premium picture and audio quality in a remarkably thin profile,
the VIZIO Thin+Light is the Ultrabook that’s impossible to ignore. Ultra-responsive and ultra-portable, the VIZIO
Thin+Light boots up instantly and goes wherever you do. If good things come in small packages, this must be
the best there is.
Available at www.VIZIO.com
This Product Sold Separately
ONE-YEAR LIMITED WARRANTY
ON PARTS AND LABOR
Covers units purchased as new in United States and Puerto Rico Only
VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one year of non-commercial usage and ninety (90)
days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option
and discretion.
To obtain warranty service, contact VIZIO Technical Support via email: TechSupport@VIZIO.com or via phone at 877 MY VIZIO (877.698.4946) from 5:00AM to 9:00PM Monday through
Friday and 8:00AM to 4:00PM Saturday and Sunday, Pacific Time, or visit www.VIZIO.com. PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE
CENTER. Proof of purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within the warranty period.
Parts and Labor
There will be no charge for parts or labor during the warranty period. Replacement parts and Products may be new or recertified at VIZIO’s option and sole discretion. Replacement parts
and Products are warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service or replacement, whichever is greater.
Type of Service
Defective Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return
shipping to the customer. PRE-AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE.
Product returns to VIZIO’s service centers must utilize either the original carton box and shipping material or packaging that affords an equal degree of protection. VIZIO Technical Support
will provide instructions for packing and shipping the covered Product to the VIZIO service center.
Limitations and Exclusions
VIZIO’s one-year limited warranty only covers defects in materials and workmanship. This warranty does not cover, for example: cosmetic damage, normal wear and tear, improper
operation, improper voltage supply or power surges, signal issues, damages from shipping, acts of God, any type of customer misuse, modifications or adjustments, as well as installation
and set-up issues or any repairs attempted by anyone other than by a VIZIO authorized service center. Products with unreadable or removed serial numbers, or requiring routine
maintenance are not covered. This one year limited warranty does not cover Products sold “AS IS”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND
DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE
OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL
LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE.
CHECK www.VIZIO.com FOR THE MOST CURRENT VERSION.
SPECIFICATIONS
Sound Bar:
Subwoofer:
Inputs:
Four 3” High-Efficiency Mid-Range Transducers +
Two 3/4” tweeters
6” High-Excursion Woofer
Sound Pressure Level (System):
101 dB
Frequency Response (System):
40 Hz - 20 KHz
Voltage:
1 x 3.5mm Stereo Audio
1 x RCA Stereo Audio
1 x Optical (Toslink)
1 x USB
1 x Digital Coaxial Audio
Compliances:
30
120 VAC, 60 Hz
UL, C-UL, FCC
LEGAL & COMPLIANCE
FCC Class B Radio Interference Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
Notice:
1. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct
such interference.
RF Exposure Information
This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to
radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
IC Statement
Operation is subject to the following two conditions:
Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired
operation of the device.
For DTS patents, see http://patents.dts.com. Manufactured
under license from DTS Licensing Limited. DTS, the Symbol, & DTS
and the Symbol together are registered trademarks, and DTS
Digital Surround is a trademark of DTS, Inc. © DTS, Inc. All Rights
Reserved.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Disposal and Recycling
You must dispose of this product properly, according to local laws and regulations. Because this
product contains electronic components and a battery, it must be disposed of separately from
household waste. Contact local authorities to learn about disposal and recycling options.
Other:
For DTS patents, see http://patents.dts.com. Manufactured
under license from DTS Licensing Limited. DTS, the Symbol, &
DTS and the Symbol together are registered trademarks, and
DTS TruVolume is a trademark of DTS, Inc. © DTS, Inc. All Rights
Reserved.
For DTS patents, see http://patents.dts.com. Manufactured
under license from DTS Licensing Limited. DTS, the Symbol, &
DTS and the Symbol together are registered trademarks, and
DTS TruSurround is a trademark of DTS, Inc. DTS, Inc. All Rights
Reserved.
This product qualifies for ENERGY STAR in the “factory default”
setting and this is the setting in which power savings will be
achieved. Changing the factory default settings or enabling
other features will increase power consumption that could
exceed the limits necessary to qualify for ENERGY STAR rating
Image(s) used under license from Shutterstock.com
We want to help you save energy.
31
© 2013 VIZIO INC. ALL RIGHTS RESERVED.
130430OC-A