VM9725BT
Operating Instructions
160
watts peak
40W x 4
VM9725BT
Thank you for choosing a Jensen product. We hope you will find the instructions
in this owner’s manual clear and easy to follow. If you take a few minutes to look
through it, you’ll learn how to use all the features of your new Jensen VM9725BT
Mobile Multimedia Receiver for maximum enjoyment.
CONTENTS
Features .................................................................................................................. 3
Controls and Indicators ......................................................................................... 6
Remote Control ...................................................................................................... 8
Operating Instructions ........................................................................................14
Steering Wheel Controls .....................................................................................22
Settings Menu ......................................................................................................23
Tuner Operation ..................................................................................................31
DVD/VCD Video Operation .................................................................................37
DVD/CD Audio Operation ...................................................................................43
MP3/WMA Operation ..........................................................................................47
iPod®/iPhone® Operation ....................................................................................53
Pandora Operation ..............................................................................................57
Bluetooth Operation ...........................................................................................61
SiriusXM® Radio Operation .................................................................................70
Rear Camera Operation.......................................................................................80
Troubleshooting ..................................................................................................81
Care and Maintenance ........................................................................................85
Specifications .......................................................................................................86
Common Replacement Parts ..............................................................................87
2
VM9725BT
FEATURES
Congratulations on your purchase of the Jensen VM9725BT Mobile Multimedia
Receiver. It’s a good idea to read all of the instructions before beginning the
installation. We recommend having your Jensen VM9725BT installed by a reputable
installation shop.
DVD
• Fast Forward/Reverse - 2X, 4X, 8X, and 20X
• Slow Motion Forward/Reverse - 1/2, 1/4, 1/6, and 1/8
• Play, Pause, Stop, Next Chapter, and Previous Chapter
CD / MP3 / WMA
•
•
•
•
•
•
•
CD-Text Compatible
ID3 Tag Compatible
Directory Search (MP3 / WMA Only)
Burn up to 1500 MP3 and WMA Files onto a DVD+R / RW
Audible Forward / Reverse Track Search (CD-DA Only)
Random, Repeat and Intro
Play, Pause, Stop, Next Track, and Previous Track
AM-FM
•
•
•
•
•
USA / Europe / Latin America / Asia Frequency Spacing
30 Station Presets (18 FM / 12 AM)
Auto Stereo / Mono
Local / Distance
Auto Store / Preview Scan
iPod®/iPhone®
• iPod®/ iPhone® via USB
• High Speed Direct Connect Interface to Access iPod® Playlists, Artists, Albums
and Songs. Play music and view video/photo* files from your iPod®. *Video/photo
playback requires jLink-USB iPod® interface cable (sold separately).
• Power Management Charges iPod® while Connected
SiriusXM® Ready
• Satellite Channel Name, Artist, Song and Categories Displayed on Monitor
3
VM9725BT
Chassis
•
•
•
•
•
•
2.0 DIN (Import / ISO-DIN Mountable)
Fixed Front Panel
6.2” High Definition TFT LCD
1,152,000 Sub Pixels (800 x 3 X 480)
Beep Tone Confirmation (ON-OFF Option)
Heat Management System - Forced-Air Cooling To Keep The Chip-Sets Operating
at Nominal Temperatures
General
• Built-In Bluetooth® with external microphone, providing Hands-Free operation
for safety and convenience and A2DP for streaming music from your
smartphone or other Bluetooth® device.
• One Composite Video Output for Additional Screens
• Front Panel Audio/Video Input
• Three-Band Tone control (Bass, Mid and Treble) with Eight Preset EQ Curves
• Front Panel A/V Aux Input for Portable Media Devices
• Rear Subwoofer Line Output
• Programmable Volume Control
• Rear Camera Input (Normal and Mirror Image View)
• Touch Screen Calibration Mode
• 4VRMS Line Output - All Channels
• Rotary Encoder Audio Control
• Front / Rear / Sub Line Output
• Rear USB Input
Navigation
•
•
•
•
•
•
TTS Voice Guidance – Street Names Announced
English, French and Spanish TTS Voice
Tele Atlas Map Data
11 Million Points of Interest
4GB SD Card with Continental US, Alaska, Hawaii, and Puerto Rico
Latest Map Guarantee (Limited time only - Must be used within 90 days of
initial activation)
Rear Camera
The VM9725BT is “camera ready.” Before accessing any camera features, you must
purchase and install a rear video camera. Once the camera is connected and
operating properly, the CAMERA source mode will become active. While the
camera is not installed, the CAMERA option appears gray, indicating the function
is not available.
4
VM9725BT
WARNING! Never install this unit where operation and viewing could interfere
with safe driving conditions.
WARNING! To reduce the risk of a traffic accident (except when using for rear
view video camera) never use the video display function while driving the
vehicle. This is a violation of federal law.
WARNING! Never disassemble or adjust the unit.
WARNING! To prevent injury from shock or fire, never expose this unit to
moisture or water.
WARNING! Never use irregular discs.
5
VM9725BT
CONTROLS AND INDICATORS
13
1
2
EJECT
3
SRC
4
NAV
5
6
7
8
9
10
OPEN
11
12
6
VM9725BT
14
VM9725BT
1. Disc Slot
2. EJECT Button
Press to eject a disc.
3. SRC Button
Press to switch between the available audio/video sources applied to the unit.
4. NAV Button
Press to toggle back and forth between the navigation and currently selected
source.
5. Internal Microphone
Internal microphone for Bluetooth calls.
6. Reset Button
Press to reset system settings to factory default (except password and parental
lock settings).
7. Rotary Encoder / Power On/Off ( ) Button
Rotate to adjust the volume. Press momentarily to activate the MUTE function.
Press again to resume normal listening.
Press to turn the unit ON. Press and hold to turn the unit OFF.
8. Remote Sensor
9. USB/SD/AV Interface Connector Cover
10. USB Interface Connector
Connect a USB device for playback of music/video files.
11. SD Interface Connector
Insert an SD card for playback of music/video files.
12. A/V Input
Accepts a 3.5mm jack through which signals from various audio/video devices
can be applied to the unit.
13. TFT Display
14. Map Cover
Covers the Mini SD card slot. The Mini SD card is used for the Navigation Map
only, not for music or other files. This may be used for firmware updates if
required.
7
VM9725BT
REMOTE CONTROL
See Table 1 for remote control functions.
35
1
34
33
2
3
iPod
MUSIC
PHOTO
VIDEO
32
31
4
5
30
29
6
28
27
7
8
9
26
25
10
11
24
23
12
13
22
21
14
15
16
20
SCN
17
MIX
18
19
8
VM9725BT
Table 1: Remote Control Functions
Button
Function
Name
#
DVD
VCD
TUNER
CD/MP3/
USB
iPod
EQ
1
Accesses
equalizer
menu.
Accesses
equalizer
menu.
Accesses
equalizer
menu.
Accesses
equalizer
menu.
Accesses
equalizer
menu.
POWER
(( ))
2
Turns the
power on/
off.
Turns the
power on/
off.
Turns the
power on/
off.
Turns the
power on/
off.
Turns the
power
on/off.
PHOTO/ 3
SUBTITLE
Language
selection
for
subtitle.
VIDEO/
ANGLE
4
Plays back
disc in
different
angle for a
scene.
Plays back
Picture
CD with
different
angle of
picture
displayed.
MENU
5
Enters
the main
menu of
the disc.
Turns on/off
PBC when
playing
VCD.
TITLE
6
Enters the Plays the
title menu first ten
of the disc. seconds
of each
chapter/
title.
CLEAR
7
Delete
entry or
move
backwards
to correct
error in
Direct
Access
mode.
Selects
Photo
mode.
Delete entry
or move
backwards to
correct error
in Direct
Access mode.
Selects
Video
mode.
Selects
Photo
mode.
Selects
Music
mode.
Delete entry
or move
backwards
to correct
error in
Direct
Access
mode.
Delete
entry or
move
backwards
to correct
error in
Direct
Access
mode.
Delete
entry or
move
backwards
to correct
error in
Direct
Access
mode.
9
VM9725BT
Table 1: Remote Control Functions
Button Function
Name
#
DVD
VCD
TUNER
CD/MP3/
USB
iPod
Selects the
previous
chapter for
playback.
Selects the
previous
chapter for
playback.
Searches
for an
available
radio
station by
decreasing
tuning
frequency.
Selects the
previous
track for
playback.
Pauses
playback/
starts
playback.
10 Selects
the next
chapter for
playback.
Selects
the next
chapter for
playback.
Searches
an
available
radio
station by
increasing
the tuning
frequency.
Selects
the next
track for
playback.
Selects
the next
track for
playback.
Increases
volume.
Increases
volume.
Increases
volume.
Fast
forwards
the disc
content.
Accesses
iPod
Menu..
Decreases
volume.
Decreases
volume.
8
9
PIC
11 Displays
Displays
set-up
set-up
parameters. parameters.
VOL +
12 Increases
volume.
Increases
volume.
13 Fast
forwards
the disc
content.
Fast
forwards
the disc
content.
14 Decreases
volume.
Decreases
volume.
15 Stops
playback.
Stops
playback.
VOL -
10
Decreases
volume.
Stops
playback.
VM9725BT
Table 1: Remote Control Functions
Button
Function
Name
#
DVD
VCD
TUNER
CD/MP3/ iPod
USB
MUTE
16
Toggles
on/off
audio
output.
Toggles
on/off
audio
output.
Toggles on/
off audio
output.
Toggles
on/off
audio
output.
Toggles on/
off audio
output.
SCN
/*
17
MIX
/#
18
Plays all
chapters
in random
order.
Plays all
tracks in
random
order.
Plays all
tracks in
random
order
1, 2, 3,
4, 5, 6,
7, 8, 9, 0
(Numeric
Keypad)
19
Directly
accesses
chapter.
20
Press
repeatedly
for slow
motion
forward/
backward.
PRESET
Plays the
first ten
seconds of
each track.
1-6 selects
preset for
current
band.
Press
repeatedly
for slow
motion
forward/
backward.
21
22
Directly
accesses
track.
Navigates
the preset
station list.
Slow
playback/
slow
rewind
playback.
Slow
playback/
slow
rewind
playback.
11
VM9725BT
Table 1: Remote Control Functions
Button
Function
Name
#
DVD
VCD
23
Pauses
playback/
starts
playback.
Pauses
playback/
starts
playback.
SETUP
24
Displays
Setup
menu.
Displays
Setup
menu.
PRESET
25
RPT
26
Repeats
playback
of current
chapter.
Repeats
playback
of current
chapter.
REPT A-B
27
Setup to
repeat
playback
from time
frame A
to time
frame B.
Setup to
repeat
playback
from time
frame A
to time
frame B.
GOTO
28
Open
direct entry
search
screen.
Open
direct entry
search
screen.
TUNER
12
30
iPod
Pauses
playback/
starts
playback.
Displays
Setup
menu.
Displays
Setup
menu.
Navigates
the preset
station
list.
Repeats
playback
of current
track.
29
BAND
CD/MP3/
USB
Selects
FM/AM
band.
Repeats
playback
of current
track.
Displays
Setup
menu.
VM9725BT
Table 1: Remote Control Functions
Button Function
Name
#
DVD
ZOOM
31 Zooms in/
out on an
image.
Zooms in/
out on an
image.
DISP
32 Displays
Displays
playing
information.
playing
information.
VCD
TUNER
CD/MP3/
USB
iPod
Displays
playing
information.
Display
playing
information.
Displays
playing
information.
MUSIC/ 33 Changes
AUDIO
the audio
language
for disc
playback.
Selects
Music
mode.
EJECT
( )
34 Ejects the
disc.
Ejects the
disc.
Ejects the
disc.
Ejects the
disc.
Ejects the
disc.
SRC
35 Selects
playing
mode.
Selects
playing
mode.
Selects
playing
mode.
Selects
playing
mode.
Selects
playing
mode.
13
VM9725BT
OPERATING INSTRUCTIONS
Power On / Off
Press the Power On/Off ( ) button to turn the unit on. The buttons on the front
of the unit light up and the current mode status appears on the LCD. Press and
hold the button to Power On/Off ( ) power off the unit.
Audible Beep Confirmation
An audible beep tone confirms each function selection. The Beep tone can be
disabled through the Setup menu.
Mute
Momentarily press the rotary encoder to activate the MUTE function. Press again
to resume normal listening. If the MUTE wire is connected, audio output mutes
when a phone call is received by the mobile phone.
14
VM9725BT
Playing Source Selections
Front Source Menu
Source Menu Page 1
Source Menu Page 2
You can use the touch screen to change the source through the SOURCE MENU.
To access the SOURCE MENU, touch the top left corner of the screen or press the
SRC button. The SOURCE MENU consists of two pages. Swipe across the screen to
go from one page to another. Touch the Radio, SXM, F-USB (Front USB), NAV, BT
(Bluetooth), AUX1, AUX2, Camera, SOHC, Disc, R-USB (Rear USB) or SWC (Steering
Wheel Controls) icons to select the corresponding source.
NOTE: If an iPod® is attached to a USB port, “iPOD” appears instead of the text
“F-USB” or “R-USB.”
15
VM9725BT
Rear Source Menu
The Rear Source Menu Screen allows you to select an audio/video source for your
vehicle’s rear zone. Touch the Disc, SOHC, F-USB (Front USB), R-USB (Rear USB),
AUX1or AUX2 icons to select the corresponding source
NOTE: If an iPod® is attached to a USB port, “iPOD” appears instead of the text
“F-USB” or “R-USB.”
16
VM9725BT
External Devices
External peripheral devices, including a game console, camcorder, navigation unit,
iPod®, Zune, etc. can be connected to this unit via RCA output using an A/V Media
Adapter Cable (not included).
Cover Not Shown
Right Audio
Left Audio
Ground
V ideo
1
2
3
4
3.5mm A/V Cable (not included)
Connect the external device to the A/V Media Adapter Cable and then plug the
cable into the A/V INPUT connector on the front of the radio. Select “AUX IN” mode
to access auxiliary devices. You cannot directly control external devices connected
to the A/V INPUT. For information regarding the use of USB devices, see “Inserting
a USB Device or SD Card”.
Volume Adjustment
Volume Increase/Decrease
To increase or decrease the volume level, turn the rotary encoder on the front
panel. When the volume level reaches “0” or “50”, a beep sounds, indicating that
the adjustment limit has been reached. The TFT screen displays the volume level
for 3 seconds.
Programmable Turn-On Volume
This feature allows the user to select a turn-on volume setting regardless of the
volume setting prior to turning the unit off. To program a specific turn-on volume
level, turn the rotary encoder to adjust the volume to the desired turn-on volume.
Push and hold the rotary encoder while the speaker icon and level indication
is displayed on the screen. The unit will beep to confirm your turn-on volume
setting.
17
VM9725BT
Equalizer and Balance/Fader Controls
The equalizer and balance/fader controls allow you to easily adjust your audio
system to meet the acoustical characteristics of your vehicle, which vary
depending on the type of vehicle and its measurements. Proper setting of the
Fader and Balance boosts the effects of the cabin equalizer.
Equalizer Screen
Touch the EQ
button display the equalizer screen.
Table 2: Equalizer Adjustments
Setting
Adjustable
Range
Function
BASS
-12 to +12
Reduces or increases the bass frequency
sound level.
Touch the + or - buttons to adjust the
settings.
MID
-12 to +12
Reduces or increases the mid-range
frequency sound level.
Touch the + or - buttons to adjust the
settings.
TREBLE
-12 to +12
Reduces or increases the high
frequency sound levels.
Touch the + or - buttons to adjust the
settings.
18
VM9725BT
Preset EQ Selection
Equalizer presets apply a preset sound level to the unit’s audio output signal.
Touch the User, Acoustic, Urban, Rave, Latin, Dance, Hip Hop or Rock button to
change the setting.
NOTE: The equalizer will automatically change to “USER” when individual audio
functions are adjusted.
To Exit the Equalizer:
• Touch the X button on the top right corner of the screen to return to the source
screen.
• Touch the BAL-FAD button to display the balance/fader screen.
19
VM9725BT
Balance/Fader Screen
Touch the BAL-FAD button on the left side of the equalizer screen to display the
balance/fader screen.
or (Balance) icon:
Balances the audio output levels between the left and right side of the vehicle.
Touch the or icon to change the setting.
or (Fade) icon:
Balances the audio output levels between the front and back side of the vehicle.
Touch the or icon to change the setting.
Sub icon:
Reduces or increases the subwoofer sound level. Touch the + or - buttons to adjust
the settings.
Loudness On/Off icon:
Loudness automatically alters the frequency response curve of audio to make it
sound more natural when played at a lower volume level. Press the On icon to
turn loudness compensation on. Press the Off icon to turn loudness compensation
off.
Subwoofer On/Off icon:
Press the On icon to turn the vehicle’s subwoofer on (if equipped). Press the Off
icon to turn the vehicle’s subwoofer off.
To Exit the Balance-Fader:
• Touch the X button on the top right corner of the screen to return to the source
screen.
• Touch the EQ button to display the equalizer screen.
20
VM9725BT
System Reset
To correct a system halt or other illegal operation, use
[RESET] Button
the tip of a pen to press the reset button located over the
rotary encoder. After a system reset, the unit restores all
factory default settings.
NOTE: If the unit is reset while a DVD is playing, the DVD resumes play once the
reset is complete.
Image/Display Settings
Video Output Modes
Table 3 shows the video output mode for each playing source.
Table 3: Video Output Modes
Playing Source
Video Output Modes
AM/FM TUNER
YCbCr Mode
DVD
YCbCr Mode
AUX IN
CVBS* Mode
*CVBS – Composite Video Baseband Signal
Parking Brake Inhibit
• When the pink “Parking” wire is connected to the vehicle Parking Brake circuit,
the front TFT monitor will display video when the Parking Brake is engaged.
(When the pink wire is grounded via the Parking Brake circuit, video will be
displayed.)
21
VM9725BT
STEERING WHEEL CONTROLS (SWC)
(if equipped)
The VM9725BT is compatible with the PAC (Pacific Accessory Corporation)
SWI-PS and Metra ASWC steering wheel control adapters. A 3.5mm female
connector (labeled “SWC Interface”) on the back of the head unit allows
connectivity to the adapters. Please refer to the instructions included with the
adapters for detailed installation information.
SWC Functions
The following controls are available for most vehicles:
1. Volume Up
2. Volume Down
3. Mute
4. Seek Up
5. Seek Down
6. Source
7. Band
8. Bluetooth Send
9. Bluetooth End
**All SWC functions may not be available on some vehicles.
22
VM9725BT
SETTINGS MENU
When using the VM9725BT for the first time, it is recommended that you
customize the system settings to suit your preferences. You may also change the
settings at any time.
To access system settings:
1. Touch the Settings button on the Source Menu screen to enter the SETTINGS
MENU. The General Sub-menu appears highlighted in blue.
2. Touch a sub-menu name icon (Video, General, Time, etc.) to select a submenu. The settings available for adjustment under the highlighted sub-menu
option will appear in the left of the screen.
3. Touch an item on the touchscreen to select the setting to be adjusted. Touch
the or icon to scroll up or down the settings list page, if applicable. An
options field, showing the current selected option, appears on the right.
4. Touch the option field to change the setting you want to adjust. The setting
option is updated.
Video Sub-menu Settings
Setting
Options
Function
Aspect Ratio
Full
The entire screen is extended horizontally to
the aspect ratio of 16 to 9. The extension ratio
is the same at any point.
Normal
The conventional display image has a 4 to 3
ratio of horizontal to vertical, leaving a blank
area on the right and left sides of the display.
Mirror
Normal
Reverse the camera image as if looking
through a rear-view mirror.
On
Enable rear camera audio function.
Off
Disable rear camera audio function.
Rear Camera
Rear Camera
Audio
23
VM9725BT
NOTE: If the rear-view video camera is connected and the unit is on, Camera mode
is selected upon shifting into REVERSE gear. If the monitor is in display mode, the
monitor automatically switches to CAMERA mode upon reverse driving. When the
reverse driving stops, the monitor returns to its original input mode.
General Sub-menu Settings
Setting
Options
Function
User Interface
Color
Aqua
This setting allows the user to select five
pre-defined LED colors for the front panel
illumination.
Red
Blue
Amber
Green
7XQHU5HJLRQ 86$
7)76WDQGE\
'LPPHU
0RGH
•
•
•
•
AM Frequency Spacing - 10 kHz
AM Frequency Band - 530 kHz ~ 1720 kHz
FM Frequency Spacing - 200 kHz
FM Frequency Band - 87.5 MHz ~ 107.9 MHz
Europe
•
•
•
•
AM Frequency Spacing - 9 kHz
AM Frequency Band - 522 kHz ~ 1620 kHz
FM Frequency Spacing - 50 kHz
FM Frequency Band - 87.5 MHz ~ 108.0 MHz
Off
Screen remains on continuously.
10s
Screen goes blank (standby mode) after 10
seconds of inactivity. Touch the screen to exit
standby and view the display.
20s
Screen goes blank (standby mode) after 20
seconds of inactivity. Touch the screen to exit
standby and view the display.
Auto
This setting dims the LCD screen when the
vehicle’s headlights are turned on. FIve settings
are pre-defined.
Night
Dark
Normal
Bright
RGB Light
24
Adjust
This setting allows the user to tune the RGB
colors of the LEDs to obtain an exact match for
their vehicle.
VM9725BT
Beep
Background
2II
No beep sounds.
2Q
When turned on, an audible beep tone confirms
each function selection.
Animation
Star
Allows the user to select a screen background.
The Wallpaper will not appear on the Main
Source Menu, Camera source or EQ settings
page.
Starry Sky
Black
Animation
Fireworks
Animation
Wave
User
Defined
Calibration
Start
Press to access the touch screen calibration
function.
Demo
On
Display various user interface TFT display pages.
Displays the Equalizer and Settings menu pages.
Off
Touch Screen Calibration
To access the “Touch Screen Calibration” function from the General sub-menu:
1. Select the “Calibration” Start option. A calibration test pattern appears on the
screen.
2. To begin calibration, touch and hold the crosshair ( + ) that appears in the “1”
icon in the center of the screen. After about one second, the crosshair moves
to the “2” icon in the quadrant.
3. Continue for each quadrant until the calibration is completed.
Demo Mode Features
The Demo mode is to On (Auto run) by default. The Demo mode will display
various user interface TFT display pages such as the Radio, Disc, Aux In, and
Camera sources. The Demo mode will also display the Equalizer and Settings
menu pages. Touching any portion of the touch screen will pause the Demo mode
temporarily. If the touch screen is not pressed again (within 30 seconds) the Demo
mode will resume.
To turn the Demo mode off, access the General Sub-menu Settings and turn Demo
to Off.
25
VM9725BT
Time Sub-Menu Settings
Setting
Options
Date
mm/dd/
yyyy
Clock Mode
12Hr
Clock displays 12 hour time using AM and PM.
24Hr
Clock displays 24 hour time up to 23:59.
(HH:MM)
Clock appears in the top right corner of the
screen during certain operations.
NOTE: The AM/PM indication will change as you
continue to adjust the hour past 12.
Time
Function
Sound Sub-menu Settings
Setting
Options
Function
6XE:RRIHU
)LOWHU
+]
Select a crossover frequency to set a cut-off
frequency for the subwoofer’s LPF (low-pass
filter).
+]
+]
DRC
2II
2Q
26
Employ the Dynamic Range Control for better
playback for low volumes.
VM9725BT
Language Sub-menu Settings
If a DVD supports more than one subtitle or audio language, all the languages are
available for selection during playback. If the selected language is not supported
by the DVD, then the default language is used.
Setting
Options
Function
OSD
English
On Screen Display appears in English.
French
On Screen Display appears in French.
Portuguese
On Screen Display appears in Portuguese.
Spanish
On Screen Display appears in Spanish.
English
Audio is heard in English when the option is
available.
French
Audio is heard in French when the option is
available.
Portuguese
Audio is heard in Portuguese when the option is
available.
Spanish
Audio is heard in Spanish when the option is
available.
English
DVD subtitles automatically appear in English
when available.
French
DVD subtitles automatically appear in French
when available.
Portuguese
DVD subtitles automatically appear in
Portuguese when available.
Spanish
DVD subtitles automatically appear in Spanish
when available.
Off
DVD subtitles do not appear.
English
DVD menu (if applicable) is displayed in English.
French
DVD menu (if applicable) is displayed in French.
Portuguese
DVD menu (if applicable) is displayed in
Portuguese.
Spanish
DVD menu (if applicable) is displayed in
Spanish.
DVD Audio
DVD Subtitle
Disc Menu
27
VM9725BT
Bluetooth Sub-Menu Settings
Setting
Options
Function
Bluetooth
On
Enable Bluetooth function.
Off
Disable Bluetooth function.
On
Connect the last active mobile phone by
touching the Pair icon when disconnected.
Off
Automatically connect when your paired phone
is in range
On
The unit automatically answers all incoming
calls.
Off
Manually answer calls by touching the call
icon.
Internal
Selects internal microphone for Bluetooth calls.
External
Selects external microphone for Bluetooth calls
(if installed).
xxxx
The default code is “1234” or “0000” depending
on the phone. Touch the keypad icon to open
the keypad and enter the pairing code or pass
key required for Bluetooth connection to your
mobile phone. Not all phones/devices require a
pairing code.
Auto Connect
Auto Answer
Microphone
Pairing Code
28
VM9725BT
DVD Rating Sub-menu Settings
The DVD system has a built-in parental lock feature to prevent unauthorized
persons from viewing restricted disc content. By default, the rating system is
unlocked. Once set up, the parental lock is released only by entering the correct
password. Once the password is entered, rating is available for setup.
Setting
Options
Function
Set Password
____
Enter a 4-digit password to activate the
“Rating” feature
Rating Level
Kid Safe
Select the appropriate rating level for the
intended audience. You may override higher
ratings by using your password.
G
PG
PG-13
PG-R
R
NC-17
Adult
Factory Default
Reset
Select “Reset” to restore the factory default
settings for the Rating system only.
OS
Current OS version.
MPU
Current MPU version.
MCU
Current MCU version.
MPEG
Current MPEG version.
To reset the password, access the “Rating Level” option and enter the current
password. Once the correct password is entered, you can access the “Password”
field and enter a new one.
NOTE: Record the password and keep it in a safe place for future reference. The
rating for each disc is marked on the disc, disc packing, or documentation. If the
rating is not available on the disc, the parental lock feature is unavailable. Some
discs restrict only portions of the disc, allowing the appropriate content will play.
For details, please refer to the disc description.
29
VM9725BT
Volume Sub-menu Settings
Setting
Options
Function
DVD
0 - 12
Increase or reduce the relative DVD volume.
USB
0 - 12
Increase or reduce the relative USB volume.
SD
0 - 12
Increase or reduce the relative SD volume
Radio
0 - 12
Increase or reduce the relative radio volume.
Bluetooth
0 - 12
Increase or reduce the relative Bluetooth
volume.
AV-IN1
0 - 12
Increase or reduce the relative AV-IN1 volume.
AV-IN2
0 - 12
Increase or reduce the relative AV-IN2 volume.
Navigation
0 - 12
Increase or reduce the relative navigation
volume.
iPod
0 - 12
Increase or reduce the relative iPod® volume.
SXM
0 - 12
Increase or reduce the relative SiriusXM®
volume.
Exiting the System Settings Menu
To exit setup mode and resume normal playback, touch the Setting button on the
screen.
30
VM9725BT
TUNER OPERATION
Tuner TFT Display Screen
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
RADIO icon: Touch to view the SOURCE MENU and select a new playback
source.
Current radio band indicator.
Stereo broadcasting indicator.
Local/Distance Indicator: Strong local signal broadcasting indicator.
Equalizer setting indicator: Displays the current equalizer preset setting.
EQ
icon: Touch for quick access to Equalizer level settings screen.
Clock: Displays the time as entered by the user in the settings menu.
Program Information: This indicator provides three types of information: PS,
RT, and PTY. PTY displays the program category of the current station such as
category (news, sports, talk etc.). RT/PS provide the current song title, current
song title, performing artist, and station call letters.
Radio frequency indicator.
icon: Touch to seek forward .
icon: Touch to tune forward one step.
icon: Touch to tune backward one step.
icon: Touch to seek backward.
Option icon: Touch to display the Options Screen.
Mute icon: Press this icon to mute the audio output of the unit. Press again to
un-mute the volume.
Direct Entry icon: Touch to access the direct entry screen.
AS: Touch to automatically store stations.
Band icon: Touch to change between AM/FM bands.
Presets provides a display of the preset frequencies. Touch to recall preset
stations.
31
VM9725BT
Options Screen
Touch the Options icon to display the Options Screen.
RDS ON/OFF:
Radio Data System (RDS) enables traffic reports to be received and provides many
facilities, including enabling the radio station name to be displayed on the radio
display.
CT ON/OFF:
(Clock Time, RDS feature) When enabled the radio system clock is synchronized
with broadcasters time signal setting the clock automatically. In some regions
where daylight savings time is not adhered to, the system clock will be off by 1
hour. In these cases, set CT to OFF and manually set the clock.
Mode Local/Distance:
This allows the user to activate local station reception function. When the Local
function is on, only radio stations with a strong local radio signal are played.
PTY List:
Program type (PTY) allows users to find similar programming by genre. Touch to
access the program type search screen.
32
VM9725BT
Switching to Radio Tuner Source
• Touch the top left corner of the screen (the RADIO box) to view the SOURCE
MENU. Touch “Radio”.
• Press the SRC button on the front panel to switch to the AM/FM or RADIO
source.
Selecting FM/AM Band
Touch the BAND icon on the screen to change between the following bands: FM1,
FM2, FM3, AM1, and AM2.
Tuning to a Station
Seek Tuning
To seek the next higher station, touch the
To seek the next lower station, touch the
icon.
icon.
Manual Tuning
To increase or decrease the tuning frequency one step, touch the
or
icon.
Direct Tuning
1.
To enter a radio station directly, touch Direct Entry to display the Direct Entry
Menu.
2. Enter the desired radio station frequency using the on-screen number pad.
If you wish to delete an entry number touch the red X on the keypad. Press
ok to tune to the selected station. To exit the screen without changing the
station, touch the X in the upper right corner.
33
VM9725BT
Using Preset Stations
Six numbered preset buttons store and recall stations for each band. All six stored
stations (P1-P6) for the current band appear on the screen.
Storing a Station
1. Select a band (if needed), then select a station.
2. Touch the on-screen Mem icon to access the Preset Screen.
3. Touch the preset number in which you would like to store the current station
(or touch X to cancel and close the menu). The station frequency is displayed
at the top of the menu. The preset number will appear highlighted. The
station frequency will be stored in the highlighted preset. The station will be
displayed on the Tuner TFT Display Screen.
Recalling a Station
1. Select a band (if needed).
2. Touch an on-screen preset icon to select the corresponding stored station.
34
VM9725BT
Auto Store (AS)
Auto Store is most useful when travelling in an area where you are not familiar
with the local stations. The Auto-Store Tuning feature will automatically scan and
enter up to eighteen FM strong stations into the preset memory locations for the
FM1, FM2 and FM3 bands or twelve strong AM stations into the preset memory
locations for the AM1 and AM2 bands. Each band stores up to six preset stations.
To select six strong stations and store them in the current band:
1. Select a band (if needed).
2. Touch the AS icon on the on-screen controls to activate the Auto Store
function. The Auto Store Search Screen appears.
The radio searches from the current frequency and checks the signal strength until
one cycle search is finished. The new stations replace stations already stored in
that band. If you have already set the preset memories to your favorite stations,
activating the Auto-Store feature will erase those stations and enter the new
strong stations.
35
VM9725BT
Search for Station by Program Type
Program type (PTY) allows users to find similar programming by genre.
1. From the Tuner TFT Display, touch the Options icon to display the Options
Screen.
2. Touch the PTY List icon to display the Program Type Screen.
3. Touch a program type, then touch the Search icon. The unit searches for the
respective stations and stops when a station is found.
Note: Touch the or icon to scroll up or down the page.
Local Radio Station Seeking
When the Local function is on, only radio stations with a strong local radio signal
are played.
To activate the Local function in the AM/FM tuner mode:
1. Touch the Options icon on the Tuner TFT Display Screen. The Options
Screen appears.
2. Touch the Mode Local/Distance icon to turn the local function on or off.
When the Local function is active, the Local indicator at the top of the screen is
illuminated. When the Distant function is active, the Distance indicator at the top
of the screen is illuminated.
36
VM9725BT
DVD/VCD VIDEO OPERATION
NOTE: When properly installed, DVD video cannot be displayed on the main TFT
screen unless the parking brake is applied. If you attempt to play a DVD while the
vehicle is moving, the TFT screen displays:
DVD/VCD TFT Display
WARNING !!!
It is illegal to view video while driving or operating a motor vehicle. Set the
parking brake to view video.
To access the on-screen controls, touch the bottom 1/3 of the screen while a DVD
is playing. Touch
to view a second page of controls.
Menu
Page 1
Menu
Page 2
37
VM9725BT
Menu Page 1
1. Elapsed Time Indicator: Displays the total playing time and elapsed of the
current movie playing.
2.
icon: Touch to select a chapter/track directly using the on-screen display
direct entry menu display.
3.
icon: Touch to stop DVD playback.
4.
icon: Touch to move to previous chapter.
5.
(Pause / Play ) icon: Touch the icon to pause playback. Touch the icon
to begin playback.
icon: Touch to advance to the next chapter on the DVD.
6.
7. Mute icon: Press this icon to mute the audio output of the unit. Press again to
un-mute the volume.
8.
icon: Touch to go to Menu Page 2.
Menu Page 2
9.
icon: Touch to select a chapter/track directly using the on-screen display
direct entry menu display.
10. A-B icon: Touch to repeat a specific portion from point A to point B of the
DVD disc.
11. Angle icon: Touch to view angles if the DVD contains scenes shot from
different angles.
12. Audio icon: Touch during playback to select to select the audio language.
Each time the icon is touched a different audio language is selected if you are
watching a disc recorded in multiple languages.
13. Subtitle icon: Touch during playback to select the subtitle language if the disc
is recorded in multiple languages. Each time the icon is touched a different
subtitle language is selected. The subtitle function can also be turned on or
off.
14. Repeat icon: Touch during playback to repeat the current chapter. Touch the
icon a second time to repeat the current title. Touch the icon a third time to
turn the repeat function off.
15.
icon: Touch to go to Menu Page 1.
38
VM9725BT
Controlling Playback
Inserting a Disc
Upon inserting a DVD disc, DVD mode is entered and disc play begins.
NOTE: If Parental Lock (Rating) is activated and the disc inserted is not authorized,
the 4-digit code must be entered and/or the disc must be authorized (see “Rating
Sub-menu Features”).
You cannot insert a disc if there is already a disc in the unit or if the power is off.
NOTE: DVD-R and DVD-RW will not play unless the recording session is finalized and
the DVD is closed.
Ejecting a Disc
Press the EJECT ( ) button on the front of the unit to eject the disc. The unit
automatically reverts to Tuner mode. You may eject a disc with the unit powered
off. The unit will remain off after the disc is ejected.
Resetting the Loading Mechanism
If the disc loads abnormally or an abnormal core mechanism operation occurs,
touch and hold the EJECT ( ) button to reset the loading mechanism. Normal
operation resumes.
Accessing DVD Mode
To switch to DVD mode when a disc is already inserted, touch SRC on the front
panel to access the source menu. Touch the disc icon.
Repeat Playback
Touch the Repeat icon to alter repeat mode in the following sequence:
• DVD: Repeat Chapter, Repeat Title, Repeat Off
• VCD (PBC Off ): Repeat Single, Repeat Off
NOTE: For VCD play, the repeat function is not available if PBC is on.
39
VM9725BT
Sectional Repeat Function (A-B)
Use the A-B function to define a specific area of a disc to repeat.
• Touch A-B on the second page of DVD on-screen controls to set the start point
(A) of the repeated section.
• Touch A-B again once you reach the desired end point (B) of the repeated
section. The selected portion of the DVD will now repeat continuously.
• Touch A-B a third time to cancel the A-B section setting and stop repeat play.
Accessing the DVD Source Menu
• Press the MENU button on the remote control to recall the DVD source menu.
Touch to select a title from the menu.
• Touch the TITLE button on the remote control to select a different title for
playback.
• Select a title using the touch screen.
Moving Through Chapters
Touch the
Touch the
icon to advance to the next chapter.
icon to move to the previous chapter.
Direct Chapter / Track Selection
To select a chapter/track directly, touch the on-screen
entry menu.
icon to display the direct
Enter the desired chapter/track using the on-screen number pad. Touch the ok
icon to enter your selection. To clear an entry and start over, touch the red X icon.
Viewing an Alternate Picture Angle (DVD Only)
Some DVDs contain scenes that have been shot simultaneously from different
angles. For discs recorded with multiple angles, touch Angle on the second page
of DVD on-screen controls to toggle available angles of the on-screen image.
40
VM9725BT
Multi-Language Discs (DVD Only)
Changing Audio Language
If you are watching a disc recorded in multiple languages, touch Audio on the
second page of DVD on-screen controls to choose a language. Each time the icon
is touched the language will change.
Changing Subtitle Language
If you are watching a disc recorded in multiple languages with subtitles, touch
Subtitle on the second page of DVD on-screen controls to choose the language in
which you would like the subtitles to appear.
NOTE: During VCD playback, touch the AUDIO on the second page of DVD onscreen controls to choose between Left Channel, Right Channel, and Stereo.
PBC - Play Back Control (VCD Only)
For VCDs with play back functionality, play back control (PBC) provides additional
controls for VCD playback.
Touch PBC on the first page of DVD on-screen controls to toggle the PBC function
“On”/”Off”. Once PBC is on, playback starts from track one of the play list.
NOTE: When PBC is activated, fast forward, slow playback, and previous/next track
are available. Repeat and direct track selection are not available.
When PBC is activated, selecting random, scan or search playback automatically
deactivates PBC.
Playback Information
During DVD and VCD playback, touch the center of the screen to display playback
information on the screen, including the media playing and current playback time.
DVD Playback Information
• DVD Video – Format of current disc.
• Time 00:01:30/00:36:10 – Indicates the playback time of the current track.
• Title 5/08 – Indicates the fifth of 8 titles on the DVD is currently playing.
• Chapter 2/16 – Indicates that the second of 16 chapters on the DVD is currently
playing.
VCD Playback Information
• VCD2.0 – Format of current disc.
• Time 00:01:30/00:36:10 – Indicates the playback time of the current track.
• PBC On/Off – Indicates whether Play Back Control is On or Off.
41
VM9725BT
General Disc Information
Table 4: Disc Properties
Symbol
12cm Disc Properties
Max Play Time
Single side single layer (DVD-5)
Single side double layer (DVD-9)
Double side single layer (DVD-10)
Double side double layer (DVD-18)
(MPEG 2 Method)
133 minutes
242 minutes
266 minutes
484 minutes
Single side single layer (VCD)
(MPEG 1 Method)
74 minutes
Single side single layer
74 minutes
Table 5: Disc Symbols
Symbol
Meaning
Number of voice languages recorded. The number inside the icon
indicates the number languages on the disc (maximum of 8).
Number of subtitle languages available on the disc (maximum of 32).
Number of angles provided (maximum of 9).
Aspect ratios available. “LB” stands for Letter Box and “PS” stands for
Pan/Scan. In the example on the left, the 16:9 video can be converted
to Letter Box video.
Indicates the region code where the disc can be played.
• Region 1: USA, Canada, East Pacific Ocean Islands
• Region 2: Japan, Western Europe, Northern Europe, Egypt, South
Africa, Middle East
• Region 3: Taiwan, Hong Kong, South Korea, Thailand, Indonesia,
South-East Asia
• Region 4: Australia, New Zealand, Middle and South America,
South Pacific Ocean Islands/Oceania
• Region 5: Russia, Mongolia, India, Middle Asia, Eastern Europe,
North Korea, North Africa, North-West Asia
• Region 6: Mainland China
• ALL: All regions
42
VM9725BT
DVD/CD AUDIO OPERATION
Instructions for TFT control and Insert/Eject are the same for DVD and CD
operation. Please see the DVD/Disc Video Operation section for information about
these topics.
Media Requirements
The VM9725BT will play music or other audio files from the following disc media:
• CD-DA
• CD-R/RW
• DVD
• DVD+R/RW
• DVD-R/RW
Upon inserting a disc, the disc and track title (if available), along with the track
number and playing time appear on the screen.
CD TFT Display
The on-screen indicators and touch key areas for CD playback are outlined below.
43
VM9725BT
1. Disc icon: Touch to view the SOURCE MENU and select a new playback source.
2. Track Indicator: Displays the current track number playing and total number of
tracks on disc.
3. EQ
: Touch for quick access to the Equalizer level settings menu.
4. Clock: Displays the time as entered by the user in the settings menu.
(Repeat) icon: Touch to alter repeat mode as follows: Repeat Single >
5.
Repeat Folder > Repeat All > Repeat Off
6.
( Random ) icon: Touch to alter random mode as follows: Random On >
Random Off
( Next ) icon: Touch to play the next track.
7.
8.
(Pause / Play ) icon: Touch the icon to pause playback. Touch the icon
to begin playback.
9.
( Previous ) icon: Touch to play the previous track.
10. List icon: Touch to display the Playlist screen.
11. Elapsed time Indicator: Displays the elapsed and total playing time of the
current track playing.
12. Playback Information Display: Displays song, artist, and album information.
44
VM9725BT
Playlist Screen
The Playlist screen allows you to directly search for music on your disc.
• Touch a track title (if available) or track number to begin playback of that track.
• Touch the or icon to scroll up or down the page.
• Touch the Search icon to access the Disc Search Screen.
Disc Search Screen
Enter the desired track the on-screen number pad. If you wish to delete an entry
number touch the red X on the keypad. Press ok to play to the selected track.
To exit the screen without changing the station, touch the X in the upper right
corner.
45
VM9725BT
Controlling Playback
Inserting a Disc
Upon inserting a CD, disc play begins. You cannot insert a disc if there is already a
disc in the unit or if the power is off.
Ejecting a Disc
Press the EJECT ( ) button on the front of the unit to eject the disc. The unit
automatically reverts to Tuner mode.
You may eject a disc with the unit powered off. The unit will remain off after the
disc is ejected.
Resetting the Loading Mechanism
If the disc loads abnormally or an abnormal core mechanism operation occurs,
press and hold the EJECT ( ) button to reset the loading mechanism. Normal
operation resumes.
Pausing/Resuming Playback
Touch the icon to pause playback. Touch the
icon to resume playback.
Moving Through Tracks
Touch the
Touch the
icon to advance to the next track on the disc.
icon to move to the previous track.
Repeat Playback
Touch the
icon to alter repeat mode according to the following:
• DVD: Repeat Single > Repeat Folder > Repeat All > Repeat Off
• CD-DA: Repeat Single > Repeat Folder > Repeat All > Repeat Off
• CD-R/RW: Repeat Single > Repeat Folder > Repeat All > Repeat Off
• DVD-R/RW: Repeat Single > Repeat Folder > Repeat All > Repeat Off
•
Random Play Select
Touch the
icon to play the tracks on the disc in a random, shuffled order. Touch
icon again to cancel Random Play mode.
the
NOTE: CD-R and CD-RW will not play unless the recording session is finalized.
46
VM9725BT
MP3/WMA OPERATION
Instructions for TFT control and Insert/Eject are the same for DVD and MP3
operation. Please see the DVD/Disc Video Operation section for information about
these topics.
Media and File Requirements
This player allows you to play back MP3 and WMA files recorded onto CD-R/RWs,
DVD+R/RWs, and DVD-R/RWs. For CD-RW discs, please make sure it is formatted
using the full method and not the quick method to prevent illegal disc operation.
For the greatest file capacity, Dual Layer DVD’s can be used when burning music to
a disc. .
MP3 Format Compatibility
The file naming formats listed below are compatible with this unit:
• ISO 9660 – file name: 12 characters, file extension: 3 characters
• ISO 9660 – file name: 31 characters, file extension: 3 characters
• Joliet – 64 characters
If the file or folder name does not conform to ISO 9660 file system standards, it
may not be displayed or played back correctly. Use the following settings when
compressing audio data for your MP3 disc:
• Transfer Bit Rate: 128kbps
• Sampling Frequency: 48kHz
When recording MP3 up to the maximum disc capacity, disable additional writing.
For recording on an empty disc up to maximum disc capacity, use the “Disc at
once” setting.
MP3 Playing Order
When selected for play, files and folders (Folder Search, File Search or Folder
Select) are accessed in the order they were written by the CD writer. As a result,
the order in which they are expected to be played may not match the order in
which they are actually played. You may be able to set the order in which MP3/
WMA files are to be played by writing them onto a medium such as a CD-R with
their file names beginning with play sequence numbers such as “01” to “99”.
47
VM9725BT
For example, a medium with the following folder/file hierarchy is subject to Folder
Search, File Search or Folder Select, as shown below.
The VM9725BT player will only recognize three folder levels and does not display
folders containing only other folders. In the example above, the unit will display
folders 3, 4, 6, and 8, but not 2 and 7 since they do not contain any tracks directly.
Folder 5 is not recognized at all since it is at the fourth level.
Inserting a USB/SD Card Device
NOTE: Front and rear USB ports are for either Apple iPod® / iPhone® devices, USB
memory sticks or portable HDD. The rear 3.5mm connector (bundled with the USB
port) is for iPod® / iPhone® video only. The USB/SD ports will recognize most USB/
SD flash memory devices and portable hard drives. The unit supports 8GB SD cards
however SD cards larger than 8GB may not be recognized. Portable hard drives
(hard drives must be formatted to FAT32 and NTFS is not supported).
1. Locate the USB/SD connector on the front of the radio.
USB
Port
SD
Card
Slot
Open
Protective
Cover
2. Lift the protective cover to reveal the USB/SD slots.
3. Insert the USB/SD device into the USB/SD connectors. The unit will read the
audio/video files on the USB/SD device automatically.
To remove the USB/SD device, press the SRC button or use the SOURCE MENU to
switch to another mode, and then remove the USB/SD device from the connector.
48
VM9725BT
MP3/WMA TFT Display
The on-screen indicators and touch key areas for MP3/WMA playback are outlined
below.
1. Disc icon: Touch to view the SOURCE MENU and select a new playback source.
2. Track Indicator: Displays the current track number playing and total number of
tracks on disc.
3. EQ
: Touch for quick access to the Equalizer level settings menu.
4. Clock: Displays the time as entered by the user in the settings menu.
5.
(Repeat) icon: Touch to alter repeat mode as follows: Repeat Single >
Repeat Folder > Repeat All > Repeat Off
6.
( Random ) icon: Touch to alter random mode as follows: Random On >
Random Off
( Next ) icon: Touch to play the next track.
7.
8.
(Pause / Play ) icon: Touch the icon to pause playback. Touch the icon
to begin playback.
9.
( Previous ) icon: Touch to play the previous track.
10. List icon: Touch to display the Playlist screen.
11. Elapsed time Indicator: Displays the elapsed and total playing time of the
current track playing.
12. Playback Information Display: Displays song, artist, and album information.
49
VM9725BT
Playlist Screen
The Playlist screen allows you to directly search for music, video or photo files
stored on your MP3 disc/USB device.
• Touch a folder to view the contents of the directory or touch a track title/file
name to begin playback of that file.
• Touch the or icon to scroll up or down the page.
• Touch the Search icon to access the Disc Search Screen.
Disc Search Screen
Enter the desired track the on-screen number pad. If you wish to delete an entry
number touch the red X on the keypad. Press ok to play to the selected track.
To exit the screen without changing the station, touch the X in the upper right
corner.
50
VM9725BT
Search Playlist by File Type
1. Touch the MUSIC icon.
2. Touch “MUSIC,” “PHOTO” or “VIDEO”. The list of files that appear will be filtered
by the type of file selected.
Controlling Playback
Inserting a Disc
Upon inserting a MP3/WMA disc, disc play begins. You cannot insert a disc if there
is already a disc in the unit or if the power is off.
Ejecting a Disc
Press the EJECT ( ) button on the front of the unit to eject the disc. The unit
automatically reverts to Tuner mode.
You may eject a disc with the unit powered off. The unit will remain off after the
disc is ejected.
Resetting the Loading Mechanism
If the disc loads abnormally or an abnormal core mechanism operation occurs,
press and hold the EJECT ( ) button to reset the loading mechanism. Normal
operation resumes.
Playing MP3/WMA Files
After inserting a MP3/WMA disc, files will play in the sequence of the “Root’
directory.
NOTE: When burning MP3 / WMA files onto a DVD disc, use the 2X or 4X burning
option, if available. This slower burning speed will help eliminate buffer errors and
increase disc reading reliability. Also, use folders when burning large numbers of
songs / files to a disc for easy music navigation. Select the “Disc at Once” option and
close your disc.
51
VM9725BT
Pausing/Resuming Playback
Touch the icon to pause playback. Touch the
icon to resume playback.
Moving Through Tracks
Touch the Next ( ) icon to advance to the next track on the MP3 disc/USB
device. Touch the Previous ( ) button to move to the previous track on the MP3
disc/USB device.
Repeat Playback
Touch the
(Repeat) icon to alter repeat mode as follows: Repeat Single >
Repeat Folder > Repeat All > Repeat Off
NOTE: CD-R and CD-RW will not play unless the recording session is finalized.
Random Play Select
Touch the
(Random) icon to play the tracks on the MP3 disc/USB device in a
icon again to cancel Random Play mode.
random, shuffled order. Touch the
52
VM9725BT
iPod®/iPhone® OPERATION
NOTE: Be sure your iPod® has the latest Apple firmware installed to avoid
connectivity issues.
Accessing iPod® Mode
This unit is Made for iPod® and iPhone®. You can control your iPod® via touch screen
to access Playlist, Artist, Albums, Songs, etc. Supported models include, but are not
limited to the following:
• iPhone® 4S / 4 / 3GS / 3G and 1st Generation
• iPod®touch 4th / 2nd and 1st Generation
• iPod® nano 6th / 5th / 4th and 3rd Generation
• iPod® classic and iPod® with video
The unit will automatically switch to iPod® mode when an iPod®, iPod® touch or
iPhone is plugged into the front or rear USB connector.
NOTE: For basic iPod® connectivity, you can use the white 30-pin to USB iPod® cable
that came with your Apple device . For iPod® video or photo playback, you must
purchase the jLink-USB cable.
To return to the iPod® menu from any other source menu, touch SRC on the front
panel until the iPod® menu appears on the screen, or choose the iPod® icon from
the source menu (only available when an iPod® or iPhone® is connected to the USB
connector).
NOTE: To transmit the video from your iPod® to the VM9725BT screen, you must set
the following options through the iPod® video settings menu:
TV Out = On, TV Signal = NTSC, and Widescreen = On.
NOTE: After disconnecting your iPod®, the VM9725BT will always return to the last
mode accessed when the iPod® is plugged back into the unit.
53
VM9725BT
Indicators/Controls
The on-screen indicators and touch key areas for iPod® playback are outlined
below.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
54
iPod icon: Touch to view the SOURCE MENU and select a new playback
source.
1/25 indicator: File number and total number of files on the disc.
EQ
icon: Touch for quick access to Equalizer level settings.
Clock: Displays the time as entered by the user in the settings menu.
Pandora icon: Touch to play Pandora Radio. The Pandora app on your iPod®
must be launched.
(Repeat) icon: Indicates the repeat function is enabled. Touch to alter
repeat mode as follows: Repeat Once > Repeat All > Repeat Off.
(Random) icon: Indicates the random function is enabled. Touch to alter
random mode as follows: Random On > Random Off.
(Next) icon: Touch to play the next track.
(Pause / Play ) icon: Touch the icon to pause playback. Touch the icon
to begin playback.
(Previous) icon: Touch to play the previous track.
List icon: Touch to access the Search Screen.
Elapsed time Indicator: Displays the elapsed and total playing time of the
current track playing.
Track information: Song title, album, and performing artist.
VM9725BT
Search Menu
The Search Menu allows you to search for playlists, artists, albums, songs, genres,
composer, podcast or audio book.
1.
2.
3.
4.
5.
6.
7.
8.
iPod icon: Touch to view the SOURCE MENU and select a new playback
source.
1/25 indicator: Indicates the file number playing and total number of files in
the category.
EQ
icon: Touch for quick access to Equalizer level settings.
Clock. Displays the time as entered by the user in the settings menu.
Scroll Bar icon: Touch or to scroll up or down the page.
Search icon: Touch to display the Direct Track Entry screen.
Music icon: Touch Music , then touch Music , Photo or Video . The list
of files that appear will be filtered by the type of file selected.
icon: Touch to return to a previous menu.
55
VM9725BT
Direct Track Entry
To select a track directly:
1. Touch the Search icon on the Search Menu to display the direct entry menu.
2. Enter the desired track the on-screen key pad. If you wish to delete an entry
number touch the red X on the keypad. Press ok to play to the selected track.
To exit the screen without changing the station, touch the iPod icon in the
upper right corner.
56
VM9725BT
PANDORA RADIO OPERATION
Pandora Radio is available via your iPhone® (data usage will occur) or
iPod® touch (Wi-Fi).
NOTE: For basic iPod®/ iPhone® connectivity, you can use the white 30-pin to USB
iPod cable that came with your Apple device . For iPod® video or photo playback,
you must purchase the jLink-USB cable.
NOTE: The Pandora app must be installed on your iPhone®/iPod® touch.
Pandora Radio TFT Display
The on-screen indicators and touch key areas for Pandora Radio functions are
outlined below.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Pandora icon: Touch to view the SOURCE MENU and select a new playback
source.
Equalizer setting indicator: Displays the current equalizer preset setting.
icon: Touch for quick access to Equalizer level settings menu.
EQ
Clock: Displays the time as entered by the user in the settings menu.
Pandora Preview Window: Displays album art, if available.
iPod icon: Touch to return to the iPod® mode of operation.
Book Mark icon: Touch to display the Add BookMark submenu to bookmark a
track or artist.
Thumbs Up Icon: Press this icon to tell Pandora “you like this track” and
bring in more tracks like it to your station.
Thumbs Down Icon: Press this icon to tell Pandora to not play this track.
Pandora will skip to the next track. If the skip limit has been reached, Pandora
will continue to play but your feedback will be recorded.
(Next) Icon: Press this icon skip a song, subject to the skip limit.
(Pause / Play ) icon: Touch the icon to pause playback. Touch the icon
to begin playback.
57
VM9725BT
12. Station List icon: Press this icon to access the Station List Screen.
13. Elapsed Time indicator: Displays the elapsed and total playing time of the
current track playing.
14. Playback Information Display: Displays station, track, artist, album, and
elapsed time information.
Bookmark Submenu
• Touch the Bookmark this Track icon to bookmark a track.
• Touch the Bookmark this Artist icon to bookmark an artist.
• Touch the Cancel icon to return to the Pandora Radio screen.
Station List Screen
The Station List Screen allows you to search for music by stations you created.
• Touch a station on the list to choose that station.
• Touch the Scroll Down (T) icon to view the next page in the list or the
Scroll Up (S) icon to view the previous page.
58
VM9725BT
To Launch/Stop Pandora Radio
1.
Launch the Pandora app on your iPhone. The Pandora icon appears on the
Main Menu Screen.
2. Touch the Pandora icon. The Pandora Screen appears.
3. Touch the icon to begin playback or the icon to pause playback.
4. Touch the iPod icon to exit Pandora and go to the iPod Search Menu.
59
VM9725BT
Pandora Error Messages
Message Displayed
Cause
Corrective Action
BookMark Track Error
Software Error
The track could not be
bookmarked, please try
again in a moment.
BookMark Artist Error
Software Error
The song could not be
bookmarked, please try
again in a moment.
Thumbs Up / Down Error
“Error Track Rating”
Software Error
Song feedback could not
be sent, please try again
in a moment.
No Active Station Error
Software Error
This account has no
stations in it. Please visit
Pandora.com and login
to your account and add
stations.
Skip Limit Reached
Software Error
Please note that
Pandora limits skips to a
maximum of six skips per
station, per hour.
60
VM9725BT
BLUETOOTH OPERATION
Bluetooth® was launched by a special interest group (SIG) comprised of Ericsson Inc.,
Intel Corp., Nokia Corp., Toshiba and IBM in 1998, and it is currently developed by
nearly 2,000 companies worldwide. The Bluetooth® word mark and logos are owned
by the Bluetooth SIG, Inc. and any use of such marks by Audiovox Corporation is
under license. Other trademarks and trade names are those of their respective
owners.
Bluetooth® technology has the capability to wirelessly synchronize and transfer data
among devices. The Bluetooth® audio capabilities can be used for mobile phones
hands free applications. Bluetooth® has many profiles and the unit is compatible
with most Bluetooth® enabled mobile phones. Before attempting to use the
Bluetooth® functions on the unit, please make sure your mobile phone supports
Bluetooth® functions.
NOTE: The line-of-sight distance between this unit and your mobile phone must be 8
feet (2.4 meters) or less for sending and receiving voice and data via Bluetooth®
wireless technology.
Please make sure your mobile phone supports Bluetooth® functions (Headset
or Handsfree profiles or both). Adhere to the following guidelines for successful
operation.
• Before using Bluetooth® functions, you must pair your mobile phone to the
VM9725BT head unit (see “Pairing the Bluetooth® System with Your Mobile Phone
and Head Unit”). To ensure the best reception for pairing and re-connection,
please make sure the mobile phone battery is fully charged before you begin.
• Try to perform pairing within a few minutes of the mobile phone being turned on.
• Once the unit has been paired with the mobile phone, the unit’s model number,
“VM9725BT”, will be displayed on the mobile phone.
• To achieve the best performance, always keep the mobile phone within 3 meters
of the head unit.
• Always keep a clear path between the mobile phone and the head unit. Never
place a metal object or any other obstacle between the mobile phone and the
head unit.
• Some mobile phones (like Sony Ericsson) may have a “Power Saving Mode” option.
PLEASE DO NOT use the power saving mode with the VM9725BT.
• Before accepting or making a call, make sure your mobile phone’s “Bluetooth®
function” is turned on.
• To ensure the best conversation quality/performance, stay within one meter of the
microphone when talking.
• To manually disconnect the mobile phone from the head unit, press the “Chain
Link” icon on the Bluetooth® user interface (next to the mobile phone name) and
the Bluetooth® will be “disconnected”, but still paired.
61
VM9725BT
Bluetooth User Interface
The on-screen indicators and touch key areas for Bluetooth® functions are outlined
below.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
62
BT icon: Touch to view the SOURCE MENU and select a new playback source.
HTC Desire Z indicator: Name of the connected device.
Clock: Displays the time as entered by the user in the settings menu.
Missed Call icon: Touch to access the missed calls list.
Received Call icon: Touch to access the received calls list.
Dialed Call icon: Touch to access the dialed calls list.
Options icon: Touch to configure Bluetooth® parameters and options.
Call History icon: The call history consists of dialed numbers, received calls,
and missed calls.
Direct Entry icon: Touch to access the Direct Entry Screen.
Phone Book icon: Touch to access the contacts list.
BT Audio icon: Touch to access the Bluetooth® music function.
/ : Indicates whether the unit is disconnected/connected with a
Bluetooth®device.
Keypad: Touch 0-9,*, # to enter the phone number you wish to dial. Once
the correct number appears on the screen touch the icon. If you enter an
incorrect number, touch the red X icon to delete the incorrect number.
VM9725BT
Hands Free Profile (HFP)
To use a mobile phone with this unit, it is necessary to first establish a connection
using Bluetooth® wireless technology. The connection is normally established
using Hands Free Profile (HFP), which gives you full control of functions available
on the mobile phone source. However, depending on your mobile phone, the
connection may be made using Head Set Profile (HSP), making some functions
unavailable. This is a limitation of your mobile phone, not theVM9725BT.
Since there are a number of Bluetooth® mobile phone implementations available
on the market, operations with your Bluetooth® mobile phone using this unit vary
greatly.
Please refer to the instruction manual that came with your Bluetooth® mobile
phone along with this manual while operating your mobile phone with this unit.
Pairing the Your Mobile Phone with the Head Unit
Your mobile phone can initiate a search for new devices and pair to the unit. The
following paragraphs describes the pairing process.
NOTE: The following procedures are generic. Procedures for pairing mobile phones
may vary slightly from mobile phone manufacturer to mobile phone manufacturer.
1. Press the SRC button on the front panel to access the Source Menu.
2. Touch the BT (Bluetooth) icon. The following screen will appear:
3. Set the Bluetooth function to ON.
4. Set the Auto Connect function to ON.
5. Access the mobile phone Bluetooth® function and set the function to ON.
6. Set the mobile phone Bluetooth® discover mode to ON.
NOTE: Some discovery modes have a time limit usually a minute before they are
automatically turned off.
7. Use the mobile phone’s add a new device feature. A device or devices will
appear on your mobile phone display.
63
VM9725BT
8. A prompt to pair or bond should appear on your mobile phone. Accept the
request and initiate the process.
NOTE: Some mobile phones require a “pass key” or pairing code to connect. If your
phone requires a pass key or pairing code, you will need to enter this number. The
default pairing code for many mobile phones is “0000”. The default code for the unit
is “1234”.
9. A prompt to enter a PIN number or passkey for the unit should appear. The
default passkey for the unit is “1234”.
10. At this point a prompt stating pairing successful should appear. Another
prompt should appear asking connect to the unit, Yes or No. Press Yes. The
mobile phone and the unit should connect. The mobile phone should display
a message similar to “Device Connected” and the mobile phone and the
unit are now connected. VM9725BT will appear on the mobile phone list of
devices.
Managing Incoming Calls
When connected to a Bluetooth® mobile phone, the unit will mute audio output,
pause CD play, and change to the Bluetooth® screen below when a call is received.
The incoming phone number or assigned name for that number will appear in
the middle of the screen. An audible tone will sound from the unit and a graphic
display will appear on the front panel.
1.
2.
3.
4.
5.
6.
64
Mute Mic icon:Touch to mute the microphone audio from the unit. Touch the
icon again to restore the microphone and audio from the unit.
Transfer to Phone icon: Touch to transfer a call back to the mobile phone.
Internal Mic / External Mic icon: Touch to toggle between the internal
microphone and an external microphone.
Mute Mic icon: Touch to mute the microphone audio from the unit. Touch the
icon again to restore the microphone and audio from the unit.
Hold icon: Touch to place a call on hold.
icon: Touch to end an in coming call.
VM9725BT
Answering an Incoming Call
To answer an incoming call touch the icon. For best reception, speak loudly and
icon.
clearly into the microphone. To end the conversation, touch the
Rejecting an Incoming Call
Press the Transfer to Phone icon to reject an incoming call. The call will revert to
your mobile phone and be left for voice mail.
Volume Control
To increase or decrease the volume level of an incoming call, turn the rotary knob
on the front panel or press the VOL +/ - buttons on the remote control.
Audio Mute
To mute the phone call audio from the unit when a call is received, press the front
panel rotary knob. Press the front panel rotary knob again and phone call audio
will be restored to the unit.
Making an Outgoing Call
Outgoing calls can be performed by direct dialing using the unit’s touch screen
keypad. The keypad screen is accessed by touching the Direct Entry icon .
Direct Dialing
1.
Touch the Direct Entry icon and the following screen will appear:
2. Using the keypad, touch 0-9,*, # to enter the phone number you wish to dial.
If you enter an incorrect number touch the red X icon on the keypad to delete
the incorrect number.
3. Once the correct number appears on the screen touch the icon. To exit the
direct entry screen touch the X icon in the upper right corner of the screen.
4. To end the call touch the
icon on the previous screen.
65
VM9725BT
Call Transfer
While talking, to transfer audio from the unit back to the mobile phone, touch the
Transfer to Phone icon and the following screen will appear:
Pressing the Transfer to Phone icon again will return the audio from the mobile
phone to the unit.
Missed Calls
The missed calls list retrieves the list of missed numbers from your mobile phone if
your mobile phone allows the function. The last missed number is the first number
on the list.
To make a call from the missed calls list, touch the call’s name and it will be dialed.
66
VM9725BT
Received Calls
The received calls list retrieves the list of numbers from your mobile phone if your
mobile phone allows the function. The last received number is the first number on
the list.
To make a call from the received calls list, touch the call’s name and it will be
dialed.
Dialed Calls
The dialed calls list retrieves the list of dialed numbers from your mobile phone if
your mobile phone allows the function. The last dialed number is the first number
on the list.
To make a call from the dialed calls list, touch the call’s name and it will be dialed.
67
VM9725BT
Phone Book
The phone book is a copy of the contact list on your mobile phone which contains
a listing of your important names and phone numbers. Touch the or icon to
scroll up or down the contact list page.
To make a call from the phone book, touch the contact’s name. Touch the
on the next screen and it will be dialed.
68
icon
VM9725BT
Bluetooth Music Function
Bluetooth® provides an Advanced Audio Distribution Profile (A2DP) profile for
streaming music from a mobile phone or a portable multimedia player (PMP),
sometimes referred to as a MP3 player. The unit allows you to play back audio files
from your mobile phone or a PMP using a Bluetooth® connection.
NOTE: Please quit A2DP mode before attempting to make a phone call, as
unexpected results may occur depending on your mobile phone model.
The unit can control a Bluetooth® audio player via Advanced Audio Distribution
Profile (A2DP) or Audio/Video Remote Control Profile (AVRCP). Bluetooth® audio
players (or Bluetooth® adapters) compatible with these profiles can be connected
to this unit. Touch the BT Audio icon and the following screen will appear:
While listening to audio the following functions are available:
1. Pause/Play ( ) icon: Touch to pause playback. Touch again to resume
playback.
2. Previous ( ) icon: Touch to play the previous track.
3. Next ( ) icon: Touch to play the next track.
Functionality varies depending on the profile used:
• A2DP: Stream audio from your Bluetooth® compatible audio player and listen to
the music through the unit.
• AVRCP: Play back, pause, select songs, etc. while streaming audio from your
Bluetooth® compatible audio player to the unit.
NOTE: Song information (e.g. elapsed playing time, song title, song index, etc.)
cannot be displayed on this unit. Since there are a number of Bluetooth® audio
players available on the market, operations with your Bluetooth® audio player
while using this unit may vary greatly. Please refer to the instruction manual that
came with your Bluetooth® audio player.
When there is an incoming call, the song will be paused. After the incoming call
is finished, the screen will return to the music function screen and playback will
continue.
69
VM9725BT
SiriusXM® RADIO OPERATION
Everything worth listening to is on SiriusXM®, getting over 130 channels,
including the most commercial-free music, plus the best sports, news, talk and
entertainment. A Vehicle Tuner (sold separately) and subscription are required. For
more information, visit www.siriusxm.com.
Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc.
and its subsidiaries. All other marks and logos are the property of their respective
owners. All rights reserved.
Activating SiriusXM® Radio
Satellite Radio operation requires the connection of an optional Vehicle Tuner and
antenna (sold separately). To connect the Vehicle Tuner, follow the instructions
provided with the tuner.
To listen to Satellite Radio, a subscription is required.
Activate the Vehicle Tuner using one of the two methods below:
• Online: Go to www.siriusxm.com and choose ACTIVATE RADIO.
• Phone: Call 1-866-635-2349.
Activation typically takes 10-15 minutes, but may take up to an hour. It is
recommended to leave your vehicle on until the “Subscription Updated” message
appears.
Retrieving the Radio ID Code
The Satellite Radio Subscription requires that the Radio ID be retrieved. To display
the Radio ID:
1. Touch the Direct icon. The Direct Entry Menu appears.
2. Enter channel “0” using the on-screen number pad then press the ok icon. The
SiriusXM® User Interface tuner screen displays the ID where the artist name is
displayed.
70
VM9725BT
SiriusXM® User Interface
The on-screen indicators and touch key areas for SiriusXM® functions are outlined
below.
Menu
Page 1
Menu
Page 2
Menu Page 1
1. SXM icon: Touch to view the SOURCE MENU and select a new playback
source.
2. Band indicator - Displays SiriusXM® radio band currently selected.
3. Equalizer setting indicator: Displays the current equalizer preset setting.
: Touch for quick access to the Equalizer level settings menu.
4. EQ
5. Signal Strength indicator : As the strength of the satellite radio signal
increases, the number of illuminated segments will increase.
6. Clock: Displays the time as entered by the user in the settings menu.
7. More icon: Touch to go to Menu Page 2.
8. Next (
) icon: Touch to tune to the next channel.
9. Category/Channel icon: Touch to toggle the icon displayed between
Category and Channel.
10. Previous (
) icon: Touch to tune to the previous channel.
11. List icon: When the Category icon is displayed, touch List to go to the
Category Screen. When the Channel icon is displayed, touch List to go to the
Channel Screen.
12. Direct icon: Touch to display the Direct Entry Menu.
71
VM9725BT
Menu Page 2
13. Back icon: Touch to go to Menu Page 1.
14. CHG PW icon: Touch to go to the change password screen.
15. Mem icon: Touch to display screen used to enter current channel into preset
memory.
16. Scan icon: Touch to scan to the next available channel. The tuner will pause
for approximately five seconds at that channel. Touch scan again to listen to
that channel. If scan is not touched, the tuner will automatically seek the next
channel.
17. Band icon: Only ten preset channels will display at a time. Touch this icon to
display the next band of preset channels. Three bands are available: Band 1,
Band 2, and Band 3.
Switching to SiriusXM® Radio
• Touch the top left corner of the screen (the radio box) to view the Source Menu.
Touch the SiriusXM icon.
• Press the SRC button on the front panel to switch to the SXM source.
Selecting the SiriusXM® Band
Touch the Band icon on the screen to change between the following bands:
Band1, Band2, and Band3.
Seek Tuning
• To seek the next higher channel, touch the
• To seek the next lower channel, touch the
icon.
icon.
Direct Tuning
To enter a SiriusXM® radio channel directly:
1. On the SiriusXM® menu page 1, touch the Direct icon to display the Direct
Entry Menu.
2. Enter the desired SiriusXM® radio channel using the on-screen number pad
then press the ok icon. If you wish to delete an entry number touch the red X
icon.
3. To exit the screen without changing the channel, touch the icon.
72
VM9725BT
Using Preset Stations
Ten numbered preset buttons store and recall channels for each band. All ten
stored channels for the current band appear on the screen.
Storing a Channel
1. Select a band (if needed), then select a channel.
2. On the SiriusXM® menu page 2, touch the Mem icon to access the Preset
Screen.
3. Touch the preset number (P1 through P10) in which you would like to store
the current channel (or touch the X icon to cancel and close the menu). The
channel will be stored in that preset and displayed on the SiriusXM® User
Interface tuner screen.
Recalling a Channel
1. Select a band (if needed).
2. Touch a channel on the preset channel list to select the corresponding stored
channel. Touch the or icon to scroll up or down the list.
73
VM9725BT
Searching for a Channel
Search by Channel
To search by channel:
1. On the SirusXM® menu page 1, touch the Category/Channel icon (if needed)
to select Channel.
2. Touch List to display the Channel Screen:
3. Touch a channel to tune to that channel.
Search by Category
Categories group music by type such as jazz, rock, classical, etc. To search by
category:
1. On the SirusXM® menu page 1, touch the Category/Channel icon (if needed)
to select Category.
2. Touch List to display the Category Screen:
3. Touch a category item. A channel list screen appears.
4. Touch a channel to tune to that channel.
74
VM9725BT
SXM Mature Channel Lock
SiriusXM® attaches a label to channels with adult content. The radio recognizes
these channels as “Mature”. The Mature Channel Lock option allows you to lock
out channels with “Mature” labels. These channels will still appear in the channel
listing (with a lock symbol), but will not be tunable unless the parental lockout
password is correctly entered.
Lock Mature Channels
To lock mature channels:
1. On the SirusXM® menu page 2, touch the Lock icon. The following screen
appears:
2. Enter your 4-digit password and then press the ok icon. The following screen
appears:
3. Touch the Lock Mature icon. The mature channels are now locked.
75
VM9725BT
Temporarily Unlock a Mature Channel
When the global “Mature Lock” is enabled, a mature channel can be temporarily
unlocked ONLY until the key is cycled. Once the radio is powered on again, the
channel will be locked again. This mode is useful for listening to mature/adult
content on a temporary basis, allowing you to listen on a channel-by-channel
basis without having to disable the global “Mature Lock” of all mature channels.
To temporarily unlock a mature channel:
1. Tune to a mature channel. If the channel is locked, Chan Locked will appear
on the SiriusXM® User Interface tuner screen.
2. On the SirusXM® menu page 2, touch the Lock icon. The following screen
appears:
3. Enter your 4-digit password and then press the ok icon. The following screen
appears:
4. Touch a lock icon to unlock a channel. Touch the or icon to scroll up or
down the list.
76
VM9725BT
Unlock All Mature Channels
To unlock all mature channels:
1. On the SirusXM® menu page 2, touch the Lock icon. The following screen
appears:
2. Enter your 4-digit password and then press the ok icon. The following screen
appears:
3. Touch the Unlock ALL icon. The mature channels are now unlocked.
77
VM9725BT
Change Lock Password
The Change Lock Password option allows you to change the password from the
default or current custom password to another password.
NOTE: The default password is 0, 0, 0, 0.
To change a password:
1. Touch the CHGPW icon. The following screen appears:
2. Enter your 4-digit password and press the ok icon.
3. Enter the new 4-didit password and press the ok icon. The new password is
set.
78
VM9725BT
SiriusXM® Radio Advisory Messages
SiriusXM® user advisory messages are listed below:
Advisory Displayed
Cause
Check Tuner
Check the SiriusXM® tuner connection on the back of
the unit to ensure that it’s correctly connected.
Check Antenna
Ensure the SiriusXM® antenna cable is connected to
the SiriusXM® tuner correctly.
Check the SiriusXM® antenna wire for breaks or sharp
bends.
Replace the antenna if necessary. If the message
remains, the antenna may have been damaged.
No Signal
The vehicle must be outside, and the antenna must
have a clear view of the southern sky. The magnetic
antenna must be mounted on the outside of the
vehicle for the best reception.
Channel Not Subscribed
This channel is not included in your SiriusXM®
subscription plan. Call 1-866-635-2349 to subscribe.
Channel Not Available
This channel is not a valid SiriusXM® channel. The
channel number has been entered incorrectly, or the
channel was removed from the SiriusXM® channel
lineup.
Channel Locked
The selected channel has been locked by the
parental controls, or a mature channel has been
selected. A prompt to enter the unlock code will
appear. Enter the unlock code.
79
VM9725BT
REAR CAMERA OPERATION
This unit is “camera ready.” Before accessing any camera features, you must install a
rear video camera.
When the camera is not installed and the function is accessed by the gear
selector being placed in reverse or by the unit’s menu, the message “VIDEO NOT
DETECTED” will appear, indicating the function is not available.
When the camera is installed, the rear view image of what is behind the vehicle
will appear when the vehicle is placed in reverse gear. When leaving reverse gear,
the unit displays the previous screen.
The rear camera image can be adjusted from Normal to Mirror using the “Setup”
menu (“see Video Sub-menu Features”).
80
VM9725BT
TROUBLESHOOTING
Table 6: Troubleshooting
Problem
Cause
Corrective Action
Radio Fuse blown
Install a new fuse with
the correct rating
Car battery fuse blown
Install a new fuse with
the correct rating
Illegal operation
Press the RESET button
located over the rotary
encoder on the front
panel
Improper audio output
connection
Check wiring and
correct
Volume set too low
Increase volume level
Improper “MUTE” connection
Review wiring diagram
and check “MUTE”
connection
Speakers damaged
Replace speakers
Heavily biased volume balance
Adjust the channel
balance to the center
position
GENERAL
Unit will not power
on
No/low audio
output
Speaker wiring is in contact with Insulate all speaker
metal part of car
wiring connections
Poor sound quality
or distortion
Unit resets itself
when engine is off
Pirated disc is in use
Use original copy
Speaker power rating not
compatible with unit
Connect proper
speakers
Speaker is shorted
Check speaker contact
Incorrect connection between
ACC and positive battery wire
Check wiring and
correct
81
VM9725BT
Problem
Cause
Corrective Action
Incorrect connection to parking
brake wire
Check wiring and
correct
Parking brake is not engaged
Stop vehicle in safe
place and apply
parking brake
Flashing image
or interference
appears on screen
DVD is not compatible with
current TV system settings
Change setup to
accommodate disc
Improper video signal
connections
Check wiring and
correct
Prolonged image or
improper height/
width ratio display
Improper aspect ratio setup
Use correct aspect
ratio setting
Auto antenna is not fully
extended
Connect the auto
antenna control cable
properly
Auto antenna not properly
connected
Connect the auto
antenna control cable
properly
LOCAL function is activated
Turn LOCAL function
off
Cannot insert disc
Disc already inside unit
Eject current disc and
insert new one
Image blurred,
distorted or dark
Disc is illegally copied
Use original disc
TFT Monitor
No image
TUNER
Weak station
searching
DISC
82
VM9725BT
Problem
Cause
Corrective Action
Disc does not play
back
Disc is warped or scratched
Use disc in good
condition
Disc is dirty or wet
Clean disc with soft
cloth
Laser pickup is dirty
Clean laser pickup with
cleaning disc
Incompatible disc is used
Use compatible disc
Disc rating exceeds Parental
Lock rating limit
Change Parental Lock
settings to lower
restriction
Disc region code is not
compatible with unit
Use disc with proper
region code
Disc is inserted upside down
Insert disc with label
side up
PBC cannot be
used during VCD
playback
PBC is not available on the disc
No repeat or
searching while
playing VCD
PBC is on
Turn PBC off
Disc is dirty or scratched
Clean disc or replace
File is damaged/bad recording
Recreate disc with
good files
MP3
Interruption
occurred during
playback
83
VM9725BT
Disc Error Messages
Message Displayed
Cause
Loading
Disc is being read
No Disc
Disc is dirty
Clean disc with soft cloth
Disc is upside down
Insert disc with label side
up
Disc not present in
loading compartment
Insert disc
Disc is dirty
Clean disc with soft cloth
Disc is upside down
Insert disc with label side
up
Bad Disc
Corrective Action
Unknown disc
Disc format is not
Use compatible disc
compatible with this unit
Region Error
DVD is not compatible
with region code of unit
Use disc with proper
region code
Error
Illegal mechanism
operation
Press EJECT key for 5
seconds to reset loading
mechanism
84
VM9725BT
Care and Maintenance
1.
2.
3.
4.
5.
6.
7.
8.
Use only a clean silicone cloth and neutral detergent to clean the front panel
or monitor. A rough cloth and non-neutral detergent (such as alcohol) may
result in scratching or discoloration.
Do not get water or cleaning fluids on the unit.
If the temperature inside the player gets too hot, a protective circuit
automatically stops play of the disc. If this occurs, allow the unit to cool before
operating the player again.
Never insert anything other than a 5” (12 cm) compact disc into the player as
the mechanism can be damaged by foreign objects.
Do not attempt to use a 3” (8 cm) CD-Single disc in this unit, either with or
without an adaptor, as damage to the player and/or disc may occur. Such
damage is not covered by the Warranty on this product.
The CD player may not operate properly in extreme hot or cold. If such
conditions occur, allow the interior of the vehicle to reach a normal
temperature before using player.
When the vehicle warms up during cold weather or under damp conditions,
condensation may appear on the LCD panel. Should this occur, the screen will
not operate properly until the moisture has evaporated.
We suggest you use a cleaning disc in this unit more frequently than in the
unit in your home due to the environmental conditions of the vehicle.
85
VM9725BT
SPECIFICATIONS
DVD/CD Player
Compatible Disc Media: DVD + R / RW (Single and Dual Layer) and CD-R / RW
Compatible Media Formats: CD-DA, MP3, WMA, VCD, SVCD, Xvid, AVI, MPEG 1/2
Signal to Noise Ratio: >95dBA
Dynamic Range: >95dB
Frequency Response: 20Hz to 20 kHz, -3dB
Channel Separation: > 60dB @ 1 kHz
D/A Converter: High performance 24-bit / 192 kHz sample rate, Multi-Bit SigmaDelta Modulator
Video
Format: NTSC, PAL (auto-detection)
Output: 1Vp-p (75-ohm)
Input: 1Vp-p (75-ohm)
FM Tuner
Tuning Range: 87.5MHz - 107.9MHz
Mono Sensitivity (-30dB): 9dBf
Quieting Sensitivity (-50dB): 15dBf
Alternate Channel Selectivity: 70dB
Signal to Noise Ratio @ 1 kHz: 58dB
Image Rejection: 80dB
Stereo Separation @ 1 kHz: >30dB
Frequency Response: 30Hz - 15 kHz, -3d
AM Tuner
Tuning Range: 530 kHz - 1720 kHz
Sensitivity (-20dB): 15uV
Signal to Noise Ratio @ 1 kHz: 50dB
Image Rejection: 60dB
Frequency Response: 50Hz - 2 kHz, -3dB
Monitor
Screen Size: 6.2” (Measured diagonally), 16:9 Widescreen
Screen Type: TFT Liquid Crystal Display (LCD) active matrix
Resolution: 1,152,000 sub pixels, 800x3 (W) X 480 (H)
86
VM9725BT
General
Auxiliary Input impedance: 10k
Power Supply: 11 to 16VDC, negative ground
Power Antenna (Blue): 500mA max, current limited protection
Amplifier Remote (Blue/White): 500mA max, current limited protection
Operating Temperature: -20C ~ 65C
Fuse: 15-amp, mini ATO type
DIN chassis dimensions: 7” X 7” X 4” (178mm x 178mm x 100mm)
CEA Power Ratings
Power Output: 13 Watts RMS x 4 channels into 4-Ohms @ < 1%
THD+N
Signal to Noise Ratio: 70dBA below reference (Reference: 1 Watt,
4-Ohms)
Frequency Response: 20 Hz - 20 kHz, -3dB. (Aux Input used as
reference input)
Reference Supply Voltage: 14.4VDC
*Specifications subject to change without notice
Common Replacement Parts
Owner’s Manual and Install Manual
30613600
Wire Harness
30313600
Trim Rings (Main and Secondary-Packaged Together)
30413590
External Microphone
30443240
Remote Control
30713600
Parking Wire
38213030
Sleeve and Mounting Brackets
30113270
Hardware Bag
30513270
87
Audiovox Electronics Corporation
Hauppauge, NY 11788
Technical Assistance: 1-800-323-4815
www.mobile.jensen.com
© 2012 Audiovox
Printed in China
128-9054
Installation Guide
VM9725BT
What’s in the Box
Tools and Supplies
90%7+HDG8QLW
/HIWDQG5LJKW'RXEOH',1
0RXQWLQJ%UDFNHWV
'RXEOH',1+DOI6OHHYH,QVWDOO%UDFNHW
7ZR&XVWRP&RVPHWLF7ULP5LQJV
3DUNLQJ%UDNH:LUH
+DUGZDUH%DJ
6SHDNHU2XWSXW+DUQHVV
3RZHU,QSXW+DUQHVV
$FFHVVRU\+DUQHVV
,QVWDOODWLRQ*XLGH
([WHUQDO0LFURSKRQH
You will need these tools and supplies to
install your VM9725BT:
• Torx type, flat-head and Philips
screwdrivers
• Wire cutters and strippers
• Tools to remove existing radio (screw
driver, socket wrench set or other
tools)
• Electrical tape
• Crimping tool
• Volt meter/test light
• Crimp connections
• 18 gauge wire for power connections
• 16 – 18 gauge speaker wire
:$51,1*1HYHULQVWDOOWKLVXQLWZKHUHRSHUDWLRQDQGYLHZLQJFRXOGLQWHUIHUHZLWK
VDIHGULYLQJFRQGLWLRQV
Optional Equipment
• Rear Camera
Disconnecting the Battery
• To prevent a short circuit, be sure to turn off the ignition and remove the negative (-) battery cable prior to
installation.
NOTE: If the VM9725BT is to be installed in a car equipped with an on-board drive or navigation computer, do not
disconnect the battery cable. If the cable is disconnected, the computer memory may be lost. Under these conditions, use
extra caution during installation to avoid causing a short circuit.
Replacing the Fuse
• When replacing the fuse, use a new 15A replacement fuse. Using a fuse with an improper rating could damage the
unit and cause a fire.
ISO-DIN Installation
This unit is designed to fit into a 2.0 DIN dashboard opening, found in many imported cars. The unit has threaded
holes in the chassis side panels which may be used with the original factory mounting brackets of some Toyota,
Nissan, Mitsubishi, Isuzu, Hyundai and Honda vehicles to mount the radio to the dashboard. Please consult with your
local car stereo specialty shop for assistance on this type of installation.
1. Remove the existing factory radio from the dashboard or
center console mounting. Save all hardware and brackets
as they will be used to mount the new radio.
2. Remove the factory mounting brackets and hardware from
the existing radio and attach them to the new radio.
CAUTION! Do not exceed M5 X 6MM screw size. Longer screws
may damage components inside the chassis.
3. Place the radio in front of the dashboard opening so the
wiring can be brought through the mounting sleeve. Follow
the wiring diagram carefully and make certain all connections
are secure and insulated with wire nuts or electrical
tape. After completing the wiring connections, plug the
ISO connectors into the mating sockets on the rear of the
chassis. Turn the unit on to confirm operation (vehicle ignition
switch must be “on”). If the unit does not operate,
re-check all wiring until the problem is corrected.
4. Mount the new radio assembly to the dashboard or center
console using the reverse procedure in step 1.
CAUTION! Be careful not to damage the car wiring.
EJE
CT
MU TE
VM91
25
NOTE: It is the end-users responsibility to install and operate this unit in a manner in accordance with local, state and
federal laws. The PARKING BRAKE wire MUST BE CONNECTED as directed in the manual.
CAUTION! Do not block the cooling fan exit. If blocked, the unit may overheat and become damaged.
Installation Using Half-Sleeve
1. Install half-sleeve in the dashboard.
a. Install adapter if necessary (optional).
b. Install half-sleeve into adapter or dashboard (use only
the supplied screws). Do not force the sleeve into the
opening or cause it to bend or bow.
WARNING! Only connect the unit to a 12-volt power
supply with proper grounding.
c. Locate the series of bend-tabs along the top, bottom and
sides of the mounting sleeve. With the sleeve fully inserted
into the dashboard opening, bend as many of the tabs
outward as necessary so that the sleeve is firmly secured
to the dashboard.
2. Use the M5 x 6 screws (provided) to install the mounting
brackets to each side of the radio using the holes indicated
in the diagram. DO NOT USE OTHER SCREWS.
3. Place the radio in front of the dashboard opening so the
wiring can be brought through the mounting sleeve.
4. Complete wiring as illustrated in the wiring diagram. Once
the wiring is complete, reconnect the battery negative
terminal. If there is no ACC available, connect the ACC lead
to the power supply with a switch.
CAUTION! Be careful not to damage the car wiring.
5. After completing the wiring connections, turn the unit on
to confirm operation (ignition switch must be on). If unit does
not operate, recheck all wiring until problem is corrected.
Once proper operation is achieved, turn off the ignition switch
and proceed with final mounting of the chassis.
a. Connect wiring adapter to existing wiring harness.
b. Connect antenna lead.
c. Carefully slide the radio into the half-sleeve, making sure
it is right-side-up. Use the supplied screws to attach the
radio to the half sleeve.
Step 1-b
Step 1-c
TAB
DASHBOARD
Step 2
Step 5-c
Using the Cosmetic Trim Ring
Two cosmetic trim rings are packaged with the head unit for
installation flexibility. This unit will fit into most import dashes
with little or no modification to the dash board/cavity. Some
US domestic vehicle dashes will accept a Double-DIN chassis,
but there is usually a small gap between the radio and dash piece
after installation is complete. In this case, use the appropriate
trim ring to conceal any gaps that may be present.
NOTE: For proper operation of the CD/DVD player, the chassis
must be mounted within 30° of horizontal. Make sure the unit
is mounted within this limitation.
TRIM RING
MOUNTING
SLEEVE
Wiring Diagram
*4=-
/:--6
A-447?
CAUTION! IMPORTANT: Incorrect wiring connections can damage the unit. Follow the wiring instructions carefully, or have the installation handled by an
experienced technician.
Need Help? For technical assistance, call the Jensen customer support line at 1-800-323-4815.
Auto antenna
control (connect
to antenna control
lead and power
supply of antenna
amplifier)
PAC
Steering Wheel Control (SWC) requires
SWI-PS Interface Adapter (Sold Separately)
Microphone
Antenna
SiriusXM
Rear Left
Front Left
Front Right
Rear Right
External Power Amplifier
128-9063
Multizone R
Cell 8PWVM
Multizone L
VM9725BT
Navigation
Operating Instructions
160
watts peak
40W x 4
VM9725BT
This page intentionally left blank.
2
VM9725BT
WARNINGS AND PRECAUTIONS
WARNING! Please read and follow the following safety precautions.
Failure to follow the instructions below may increase your risk of collision and
personal injury.
The Attention - Please Drive Safely! Screen is displayed each time the iGo primo
software is turned ON as a reminder to make use of the system’s navigational aids
in a safe manner.
Before using the software, read this entire manual. Make sure that you are familiar
with the system’s features and know how to operate the system. Proper use of the
iGo primo software includes the following guidelines:
The iGo primo software is not a substitute for your personal judgment. The route
suggestions should never supersede any local traffic regulation or your personal
judgment and /or knowledge of safe driving practices. Prior to completing any
maneuvers suggested by your iGo primo software (for example, a U-turn or a left
turn), verify that you can legally and safely complete the maneuver. Do not follow
route suggestions if they direct you to perform an unsafe or illegal maneuver,
would place you in an unsafe situation, or would route you into an area that you
consider unsafe.
Glance at the screen only when necessary and safe to do so. Let the computer
voice guide you. If prolonged viewing is necessary, pull off the road to a
safe location.
Do not use the iGo primo software to locate emergency services (such as police,
fire stations, hospitals, and clinics). The database may not include all emergency
service providers. Use your own best judgment and ask for directions in
these situations.
If the vehicle is in motion, only a passenger should program the iGo primo software. The driver should not program the system unless the vehicle is parked in a
safe location.
The iGo primo software’s map database provides information on suggested routes
without regard to factors that may affect your driving experience or the time required to arrive at your destination. For example, the system does not reflect road
detours, closures or construction, some road characteristics (e.g., road surface,
slope or grade, weight or height restrictions, etc.), temporary traffic congestion,
weather conditions, and similar factors.
3
VM9725BT
iGo primo software provides turn-by-turn visual and voice assistance to direct you
to your selected destination. The software quickly calculates step-by-step
directions to any destination available on the included navigation map.
The iGo primo software uses Global Positioning System (GPS) satellites, and a
digital roadway map database to calculate and display travel directions. The system’s GPS antenna receives signals from a constellation of 24 satellites orbiting the
earth and uses the strongest signals to determine your position to within meters.
Vehicle Position
The iGo primo software’s computer considers vehicle speed and heading changes,
together with longitude and latitude information, to accurately determine vehicle
heading and position on a digital map.
Signals from GPS satellites are used to determine the vehicle location. Three
(good) or four (best) satellites must be received to accurately determine location.
The GPS reception status is indicated by the GPS symbol on the map.
Map and Information Database
The map database used by your iGo primo software was created using
high-resolution aerial and land based data collection.
Car navigation maps are frequently updated. While the database was judged to
be as accurate as possible at the time of its release, a map database can never be
100% accurate. Road information that is maintained in the map databases, such as
turn restrictions or road names may change over time.
4
VM9725BT
SAFETY INFORMATION
User Agreement
When the unit is first turned on, you will see the following message, warning you
to operate your navigation system appropriately:
You must agree to the above notice before using the navigation software.
Tap
to proceed to the Navigation Menu.
5
VM9725BT
Driver Safety Rules
The following safety rules must be followed to prevent accidents that can result in
injury or death to yourself or others:
‡ The driver should operate the device only when the vehicle is stopped. Only
a vehicle passenger should operate the device while the vehicle is moving.
When driving, the need to view the display is minimal. Voice prompts will
guide you to your destinations.
‡ It is your responsibility to comply with all traffic laws.
‡ The navigation software is designed to assist you in the process of reaching
your destination. It is not a substitute for attentiveness and good judgement.
‡ It is your responsibility to disregard any unsafe, hazardous, or illegal route
suggestions.
‡ The device does not include, analyze, process, consider, or reflect any of the
following:
a. Legal restrictions (such as vehicular type, weight, height, width, load
and speed restrictions);
b. Road slope or grade, bridge height, width, weight, or other limits;
c. Population density;
d. Neighborhood quality or safety;
e. Availability or proximity of law enforcement, emergency rescue,
medical, or other assistance;
f. Construction work zones or hazards;
g. Road or lane closures;
h. Road, traffic, or traffic facilities’ safety or condition;
i. Weather conditions;
j. Pavement characteristics or conditions;
k. Special events;
l. Traffic congestion.
‡ While every attempt is made to ensure that the database is accurate,
roadways, points of interest, and business and service locations may change
over time.
‡ Do not use the unit to navigate to a police station, hospital, etc. in an
emergency. Call 911 for assistance.
‡ Laws in some states prohibit wearing stereo headphones or may prohibit use
or placement of a navigation device while operating a motor vehicle. Please
contact your state’s Department of Motor Vehicles for information.
6
VM9725BT
WARNINGS AND PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Vehicle Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Map Information and Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
User Agreement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Driver Safety Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
QUICK START GUIDE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
About GPS and GNSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Acquiring a Satellite Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Accessing the Navigation Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Adjusting the Navigation Voice Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
INITIAL SETUP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
NAVIGATION MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
BUTTONS AND OTHER CONTROLS ON THE SCREEN . . . . . . . . . . . . . . . . . . . . . . . . . .19
Using Keyboards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Beyond Single Screen Tap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
MAP SCREEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Navigating on the Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Position Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Objects on the Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Manipulating the Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Quick Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Where Am I? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
NAVIGATING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
SELECTING THE DESTINATION OF A ROUTE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Entering an Address or Part of an Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Selecting the Destination from the Places of Interest . . . . . . . . . . . . . . . . . . .64
Selecting a Map Location as the Destination . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Selecting the Destination from Your Favorites . . . . . . . . . . . . . . . . . . . . . . . . . .81
Selecting One of the Most Likely Destinations (Smart History) . . . . . . . . . .83
Selecting a Recent Destination from the History . . . . . . . . . . . . . . . . . . . . . . . .85
Entering the Coordinates of the Destination. . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Building a Route from the List of Destinations (Create Route) . . . . . . . . . . .89
VIEWING THE ENTIRE ROUTE ON THE MAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
CHECKING ROUTE PARAMETERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92
7
VM9725BT
MODIFYING THE ROUTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93
Selecting a New Destination When Already Having a Route . . . . . . . . . . . . .93
Setting a New Starting Position for the Route . . . . . . . . . . . . . . . . . . . . . . . . . .94
Editing the List of Destinations (Edit Route) . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Pausing the Active Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Canceling the Active Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Checking Route Alternatives When Planning the Route . . . . . . . . . . . . . . . . .98
Checking Route Alternatives for an Existing Route . . . . . . . . . . . . . . . . . . . . . .99
Changing the Vehicle Used In Route Planning . . . . . . . . . . . . . . . . . . . . . . . . 101
Changing the Road Types Used In Route Planning . . . . . . . . . . . . . . . . . . . . 102
SAVING A LOCATION AS A FAVORITE DESTINATION . . . . . . . . . . . . . . . . . . . . . . . . 103
SAVING A LOCATION AS AN ALERT POINT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
EDITING AN ALERT POINT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
WATCHING THE SIMULATION OF THE ROUTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
REFERENCE GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
CONCEPTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Smart Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Daytime and Night Color Themes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Route Calculation and Recalculation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Green Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Road Safety Cameras and Other Proximity Alert Points . . . . . . . . . . . . . . . 114
Speed Limit Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
GPS Position Quality Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Stored Traffic Information In Route Planning . . . . . . . . . . . . . . . . . . . . . . . . . 115
‘MORE’ MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
SETTINGS MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Sound and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Customize Quick Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Traffic Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Route Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Green Routing Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Map Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Visual Guidance Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Regional Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Trip Monitor Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
END USER LICENSE AGREEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
8
VM9725BT
QUICK START GUIDE
Follow these six easy steps and you are on your way.
NOTE: Before operating your iGo Primo software, please carefully read and follow
the instructions provided in the “Warnings and Precautions” section of this
manual.
Step 1 - Access the navigation function:
You can access the navigation function by pressing the front panel NAV button.
Step 2 - Start Up:
After the iGo primo software starts, you will see the reminder warning to use your
iGo primo software safely and lawfully.
Step 3 - Access the Main Menu:
Press
access the Navigation Menu:
9
VM9725BT
Step 4 - Select a Destination:
You have many ways to select a destination. Select by touching screen:
to select your destination by entering an address or selecting
• Tap
a place of interest, a location on the map or one of your Favorite destinations.
You can also look up your recent destinations from the Smart History, enter a
coordinate or use the location saved in a photo.
to display the route parameters and the route in its full
• Tap
length on the map. You can also perform route-related actions such as editing
or canceling your route, setting a start point for the route, picking route
alternatives, avoiding parts of the route, simulating navigation or adding the
destination to your Favorites.
to customize the way the navigation software works, simulate
• Tap
demo routes, or to run some additional applications.
to start navigating on the map. The button itself is a miniature
• Tap
live map that shows your current position, the recommended route and the
surrounding map area. Tap the button to enlarge the map to the full screen.
Step 5 - Map/Guide Along Route
Proceed to the highlighted route and drive while the iGo primo software provides
guidance to your destination.
10
VM9725BT
Step 6 - Arriving at Your Destination
When you are near your destination, the destination is indicated by a
checkered flag symbol
.
Refer to the rest of this manual to become more familiar with the many options
available on your iGo primo software.
11
VM9725BT
INTRODUCTION
We hope that you enjoy using your new navigation system. This manual is
designed to help you get the most out of your system.
This navigation system leads you straight to your destination. You can navigate
and plan your route with an easy-to-use and intuitive interface, plan your trip
to suit your personal preferences and interests, and find and save (bookmark)
interesting destinations before you begin your trip.
Key Features
•
•
•
•
•
•
TTS Voice Guidance – Street Names Announced
English, French and Spanish TTS Voice
Tele Atlas Map Data
11 Million Points of Interest
4GB SD Card with Continental US, Alaska, Hawaii, and Puerto Rico
Latest Map Guarantee (Limited time only - Must be used within 90 days of
initial activation)
• Compatible with Jensen VM9725BT multimedia receiver
Specifications
•
•
•
•
SiRF Prima Processor
Processor Speed 600MHz
NAND Flash 256MB
GPS Receiver - SiRF
12
VM9725BT
About GPS and GNSS
The unit uses a vehicle Global Positioning System (GPS)-based navigation device
which uses digital map data to guide you from your selected location A to
location B, using location information obtained from a Global Navigation Satellite
System (GNSS).
A GNSS consists of a set of satellites that transmit high-frequency radio signals
containing time, direction, and distance data that can be picked up by a receiver,
allowing users to pinpoint their precise locations anywhere around the globe.
Navigation Satellite Receivers (GPS devices) use this transmitted information to
calculate an exact location on the Earth. Every point on Earth can be identified
by latitude and longitude. The receiver uses the information sent by at least three
satellites and determines the coordinates of the receiving device.
By comparing the time the signals were transmitted from the satellites and the
time they were recorded, the receiver calculates how far away each satellite is.
The distance of the receiver from three or more satellites reflects its position
on the surface of the planet. Using these distance measurements, the receiver
might also be able to calculate speed, bearing, trip time, distance to destination,
altitude, etc. The GPS position may be displayed as a point on a digital map (at
least three satellites’ signals must be received) and as the GPS device moves the
corresponding trace is displayed as well.
Please keep in mind that although the radio signals of navigation satellites will
pass through clouds, glass, plastic, and other lightweight materials, satellitenavigation receivers will not work underground or in some enclosed spaces.
13
VM9725BT
Acquiring a Satellite Signal
The initial GPS location lock is best established when your vehicle is parked. If
the device is in motion, the signal can take longer to initially connect. Once the
initial coordinates are established, the software will follow you as you move and
navigate.
Drive your vehicle to an open area where the GPS signal can be clearly received
and park the vehicle. If the device is in motion, the signal can take longer to
initially connect.
If you cannot acquire the signal, drive to another location. If the signal is still
unobtainable, check your antenna installation.
Once a GPS signal has been established, verify that the information display clock
time (time displayed on the radio) matches the navigation system clock. With an
established GPS signal, the software will follow you as you move and navigate.
The GPS reception quality icon shows the current accuracy of the position
information.
Icon
Description
iGO primo has no connection to the GPS receiver: GPS
navigation is not possible.
Devices with a built-in GPS receiver are permanently
connected. On such devices, the icon does not appear in
normal circumstances.
iGO primo is connected to the GPS receiver, but the
signal is too weak and the receiver cannot determine the
GPS position.
GPS navigation is not possible.
Only a few satellites are received. Position information is
available, but elevation (altitude) cannot be calculated.
GPS navigation is possible, but the position error may be
significant.
Altitude information is available, the position is a 3D
position.
GPS navigation is possible.
14
VM9725BT
GETTING STARTED
iGO primo is optimized for in-car use. There is no need to use a stylus. You can use
it easily by tapping the screen buttons and the map with your fingertips.
Accessing the Navigation Software
Press the MENU button and touch the Navigation icon to access navigation mode.
Adjusting the Navigation Voice Volume
While the Navigation is on and a route has been programmed, the Navigation will
speak commands. While the Navigation is speaking, adjust the volume by turning
the radio volume knob. The Navigation volume will remain at this level and when
done speaking will return to the previous source (ie, radio) at the volume level set
for that source.
The main volume must be set above zero in order to hear the spoken directions.
If the radio is muted, the Bluetooth (if equipped) engaged in a call, or the volume
knob has been turned to zero, the navigation will not be heard but your visual
directions will continue.
Selecting / Listening to a Source while Navigating
While navigating, other sources may be selected and listened to such as AM-FM
Tuner, CD, etc. To listen to another source while navigating, press the SRC button
and then select a source from the Source Menu. Navigation voice prompts will be
heard automatically, although the navigation map cannot be seen. To view the
navigation screen, but continue to listen to the selected source, press the NAV/
WIDE button.
15
VM9725BT
INITIAL SETUP
When using the navigation software for the first time, an initial setup process
starts automatically. Do as follows:
1. Select the written language of the application interface. Later you can change
it in Regional settings.
2. Read the End User License Agreement. Tap
to continue.
to continue.
3. The Configuration Wizard starts. Tap
4. Select the language and speaker used for voice guidance messages. Later you
can change it in Sound and Warnings settings.
16
VM9725BT
5. If needed, modify the time format and unit settings. Later you can change
them in Regional settings.
6. If needed, modify the default route planning options. Later you can change
them in Route settings.
7. The initial setup is now complete. The Configuration Wizard can be restarted
later from the Settings menu.
After the initial setup, the Navigation Menu appears and you can start using iGO
primo.
17
VM9725BT
NAVIGATION MENU
You can reach all parts of iGO primo from the Navigation Menu.
You have the following options:
• Tap
to select your destination by entering an address or selecting
a place of interest, a location on the map or one of your Favorite destinations.
You can also look up your recent destinations from the Smart History, enter a
coordinate or use the location saved in a photo.
• Tap
to display the route parameters and the route in its full
length on the map. You can also perform route-related actions such as editing
or canceling your route, setting a start point for the route, picking route
alternatives, avoiding parts of the route, simulating navigation or adding the
destination to your Favorites.
to customize the way the navigation software works, simulate
• Tap
demo routes, or to run some additional applications.
to start navigating on the map. The button itself is a miniature
• Tap
live map that shows your current position, the recommended route and the
surrounding map area. Tap the button to enlarge the map to the full screen.
18
VM9725BT
BUTTONS AND OTHER CONTROLS ON THE
SCREEN
When you are using iGO primo, you usually tap buttons on the touch screen.
You only need to confirm selections or changes if the application needs to restart,
it needs to perform a major reconfiguration, or you are about to lose some of your
data or settings. Otherwise, iGO primo saves your selections and applies the new
settings without confirmation as soon as you use the controls.
Type
Example
Description
How to Use It
Button
Tap it to initiate a
function, to open
a new screen, or to
set a parameter.
Tap it once.
Button
with value
Some buttons
display the current
value of a field or
setting. Tap the
button to change
the value. After the
change, the new
value is shown on
the button.
Tap it once.
Icon
Shows status
information.
Some icons also
function as a button.
Tap them once.
19
VM9725BT
List
When you need to
select from several
options, they
appear in a list.
Grab the list
anywhere and slide
your finger up or
down. Depending
on the speed of the
sliding, the list will
scroll fast or slow,
only a bit or until the
end.
Alternatively, move
between pages with
the
and
buttons and tap the
value that you want.
Radio
button
When there are only Tap one of the
a few choices, radio buttons to select a
buttons may be
new value.
used instead of lists.
Only one value can
be selected.
Switch
When there are
only two choices, a
checkmark shows
whether the feature
is enabled.
Tap it to turn the
switch on or off.
Slider
When a feature can
be set to different
values in a range,
iGO primo shows
an indicator on a
gauge that displays
and sets the value
• Drag the handle to
move the slider to
its new position.
• Tap the slider
where you want the
handle to appear;
the thumb jumps
there.
Virtual
keyboard
Alphabetic and
alphanumeric
keyboards to enter
text and numbers.
Each key is a touch
screen button.
20
VM9725BT
Using Keyboards
You only need to enter letters or numbers when you cannot avoid it. You can type
with your fingertips on the full-screen keyboards and you can switch between
various keyboard layouts, for example English, Greek or numerical.
Task
Switching to another keyboard layout,
for example from an English keyboard
to a Greek keyboard.
Correcting your entry on the keyboard.
Instruction
button and
Tap the
select the new keyboard layout from
the list.
to remove the unneeded
Tap
character(s). Tap and hold the button
to delete several characters or the
entire input string.
Entering a space, for example between
button at the bottom
Tap the
a first name and a family name or in
center of the screen.
multi-word street names.
Entering numbers and symbols.
to switch to a keyboard
Tap
offering numeric and symbol
characters.
Finalizing the keyboard entry
(accepting the suggested search
result).
Tap
Finalizing the keyboard entry
(opening the list of search results).
Tap
.
Finalizing the keyboard entry
(saving your input).
Tap
.
Canceling the keyboard entry
(returning to the previous screen).
Tap
.
.
21
VM9725BT
Beyond Single Screen Tap
You usually need to tap the screen only once. However, some useful features can
be accessed with combined touch screen tapping. Those are the following:
Action
Details
Tapping and holding the Tap and keep pressing the following buttons to reach
screen.
extra functions:
on list and menu
• Tap and hold
screens: the Map screen appears.
• Tap and hold any of the
,
,
,
,
, and
buttons on the Map screen: you can
rotate, tilt or scale the map continuously.
on keyboard screens: you can
• Tap and hold
delete several characters quickly.
• Tap and hold
or
pages continuously.
Gestures (drag & drop).
22
in long lists: you can scroll
You need to drag and drop the screen only in cases
like:
• Moving the handle on a slider.
• Scrolling the list: grab the list anywhere and slide
your finger up or down. Depending on the speed
of the sliding, the list will scroll fast or slow, only a
bit or until the end.
• Moving the map in map browsing mode: grab the
map, and move it in the desired direction.
VM9725BT
MAP SCREEN
The Map screen is the most frequently used screen of iGO primo.
Navigating On the Map
A small live map is displayed on the startup screen, the Navigation Menu, as a part
of the
button.
To enlarge this small map and open the Map screen, tap
.
This map shows the current position (the Vehimarker, a red arrow by default), the
recommended route (an orange line), and the surrounding map area.
When there is no GPS position, the Vehimarker is transparent. It shows your last
known position.
You see colored dots circling around a satellite symbol in the top left corner. The
more green dots you see, the closer you are to get the valid GPS position.
23
VM9725BT
When GPS position is available, the Vehimarker is displayed in full color, now
showing your current position.
There are screen buttons and data fields on the screen to help you navigate.
During navigation, the screen shows route information.
By default, only one data field is displayed in the bottom right corner. Tap this field
to see all route data fields.
Tap any of the data fields to suppress others and display only the selected one.
The data fields are different when you are navigating an active route and when
you have no specified destination (the orange line is not displayed).
24
VM9725BT
Default data fields when cruising without a destination (tap and hold any of the
fields to change its value):
Field
Description
Shows your current speed given by the GPS receiver.
Shows the speed limit of the current road if the map contains
it.
Shows the current time corrected with time zone offset.
The accurate time comes from the GPS satellites, and the
time zone information comes from the map or it can be set
manually in Regional settings. (The current time is always
displayed in the top left corner of menu screens.)
Default data fields when navigating a route (tap and hold any of the fields to
change its value):
Field
Description
Shows the distance you need to travel on the route before
reaching your final destination.
Shows the time needed to reach the final destination of
the route based on information available for the remaining
segments of the route. Historical traffic data or traffic
patterns are also taken into account whenever such
information exists..
Shows the estimated arrival time at the final destination
of the route based on information available for the
remaining segments of the route. Historical traffic data or
traffic patterns are also taken into account whenever such
infromation exists.
25
VM9725BT
Position Markers
Vehimarker and Lock-on-Road
When your GPS position is available, iGO primo marks your current position with
the Vehimarker. By default, this marker is a red arrow, but you can change this icon
in Settings.
The exact location of the Vehimarker depends on the vehicle type used for route
calculation. The vehicle type can be selected in Route settings.
• If you choose pedestrian: The Vehimarker is at your exact GPS position. The
direction of the icon shows your current heading.
• If you choose any of the vehicles: The Vehimarker may not show your exact
GPS position and heading. If roads are near, it is aligned to the nearest road
to suppress GPS position errors, and the direction of the icon is aligned to the
direction of the road.
Selected Map Location (Cursor) and Selected Map Object
You can mark a map location in the following ways:
• Tap the map when navigating,
• Tap the map when you are asked to confirm the destination at the end of a
search, or
• Tap the map in Find on Map.
When a map location is selected, the Cursor appears at the selected point on the
map.
The Cursor is displayed with a radiating red dot (
) to make it visible at all
zoom levels.
The location of the Cursor can be used as the destination of the route, a new alert
point, you can search for Places around it, or you can save this location as one of
your Favorite destinations.
You can also select some of the objects on the map. If you tap the map at the icon
of a Place of Interest or an alert point, the object will be selected (you see a red
circling border around the object), and you can get information about this object
or use it as a route point.
26
VM9725BT
Objects On the Map
Streets and Roads
iGO primo shows the streets in a way that is similar to how the paper road maps
show them. Their width and colors correspond to their importance: you can easily
tell a freeway from a small street.
Turn Preview and Next Street
When navigating a route, the top section of the Map screen shows information
about the next route event (maneuver) and the next street or the next city/town.
There is a field in the top left corner that displays the next maneuver. Both the
type of the event (turn, traffic circle, exiting freeway, etc.) and its distance from the
current position are displayed.
A smaller icon shows the type of the second next maneuver if it is near the first
one. Otherwise, only the next maneuver is displayed.
27
VM9725BT
Most of these icons are very intuitive. The following table lists some of the
frequently shown route events. The same symbols are used in both fields:
Icon
Description
Turn left.
Turn right.
Turn back.
Bear right.
Turn sharp left.
Keep left.
Continue straight in the intersection.
Go left on the traffic circle, 3rd exit (next maneuver).
Enter traffic circle (second next maneuver).
Enter freeway.
Exit freeway.
Board ferry.
28
VM9725BT
Leave ferry.
Approaching a waypoint.
Approaching the destination.
Lane Information and Signposts
When navigating on multilane roads, it is important to take the appropriate lane in
order to follow the recommended route. If lane information is available in the map
data, iGO primo displays the lanes and their directions using small arrows at the
bottom of the map. Highlighted arrows represent the lanes you need to take.
Where additional information is available, signposts substitute arrows. Signposts
are displayed at the top of the map. The color and style of the signposts are
similar to the real ones you can see above road or by the roadside. They show the
available destinations and the number of the road the lane leads to.
All signposts look similar when cruising (when there is no recommended route).
When navigating a route, only the signpost that points to the lane(s) to be taken is
displayed in vivid colors; all others are darker.
29
VM9725BT
Junction View
If you are approaching a freeway exit or a complex intersection and the needed
information exists, the map is replaced with a 3D view of the junction. The lanes
you need to take are displayed with arrows. Signposts can also be present if
information is available.
3D Object Types
iGO primo supports the following 3D object types:
Type
Description
3D terrain
3D terrain map data shows changes in terrain, elevations or
depressions in the land when you view the map in 2D, and
use it to plot the route map in 3D when you navigate. Hills
and mountains are shown in the background of the 3D map,
and illustrated by color and shading on the 2D map.
Elevated roads
Complex intersections and vertically isolated roads (such as
overpasses or bridges) are displayed in 3D.
3D landmarks
Landmarks are 3D artistic or block representations of
prominent or well-known objects.
30
VM9725BT
Elements of the Active Route
iGO primo shows the route in the following way:
Symbol
Name
Description
Current GPS position
and Start point
Your current position displayed on the
map.
• In pedestrian mode it is the exact
GPS position.
• If a vehicle is selected for route
calculation and roads are near, the
symbol is snapped onto the nearest
road.
Normally if GPS position is available,
the route starts from the current
position. If there is no valid GPS
position, iGO primo uses the last
known position as the start point.
Waypoint (intermediate An intermediate destination of
destination)
the route before reaching the final
destination.
Destination (end point)
The final destination of the route.
Route color
The route always stands out with its
color on the map, both in daytime and
in night color mode.
Streets and roads that
are excluded from the
navigation
You can choose whether you want
to use or avoid certain road types.
However, when iGO primo cannot
avoid such roads, the route will include
them and it will show them in a color
that is different from the route color.
Streets and roads that
are affected by traffic
events
Road segments may be affected by
traffic events received. These streets
and roads are displayed in an alternate
color, and small symbols displayed
along the route show the type of the
traffic event.
31
VM9725BT
Manipulating the Map
Tap the map anywhere to browse it during navigation. The map stops following
the current position (the Vehimarker, a red arrow by default, is not locked in a fix
position on the screen any more) and control buttons appear to help you modify
the map view.
32
VM9725BT
Action
Button(s)
Description
Moving the map
with drag & drop.
No buttons
You can move the map in any
direction: tap and hold the map,
and move your finger towards the
direction you want to move the map.
Zooming in and
out
Tilting up and
down
Rotating left and
right
Changes how much of the map is
displayed on the screen.
iGO primo uses high-quality vector
maps that let you examine the map
at various zoom levels, always with
optimized content. It always displays
street names and other text with the
same font size, never upside-down,
and you only see the streets and
objects that you need.
Map scaling has a limit in 3D map
view mode. If you zoom out further,
the map switches to 2D view mode.
Tap the button once to modify the
view in large steps, or tap and hold
the button to modify it continuously
and smoothly.
,
Changes the vertical view angle of
the map in 3D mode.
Tap the button once to modify the
view in large steps, or tap and hold
the button to modify it continuously
and smoothly.
,
Changes the horizontal view angle
of the map.
Tap the button once to modify the
view in large steps, or tap and hold
the button to modify it continuously
and smoothly.
,
2D or 3D view
,
Tap this button to switch between
the 3D perspective and 2D topdown map view modes.
33
VM9725BT
Compass in 2D
map view mode
Compass in 3D
map view mode
,
,
The direction of the compass shows
North.
Tap the button to switch to North-up
view, and then tap again to rotate
the map in the previous direction.
The direction of the compass shows
North.
Tap the button to switch to North-up
view, and then tap again to rotate
the map in the previous direction.
Location
information
Tap this button to open a new
screen with information about the
selected map point, the Cursor.
Return to normal
navigation
Tap this button to move the map
back to follow the current GPS
position. Automatic map rotation is
also re-enabled.
The map manipulation buttons
disappear and navigation continues.
Additional options
Tap this button to open a list of
additional features like saving the
Cursor as a Favorite destination,
or searching for Places around the
Cursor.
Select destination
Tap this button to select the Cursor
as a new destination. The route is
automatically calculated.
34
VM9725BT
Quick Menu
The Quick menu is a selection of controls and functions that are frequently
needed during navigation.
It can be opened directly from the Map screen by tapping
.
The menu will close after a few seconds of inactivity or if you tap
.
The menu will also close if you initiate simple controls like muting the device. In
other cases tapping a button will open a new screen with options.
Most of these functions are shortcuts. They are accessible from the menu system.
35
VM9725BT
There are more functions available than the number of buttons in the menu. In
Settings, you can choose the function of each button. The following options are
available:
Button
Description
Shortcut for:
Master Volume slider
This slider adjusts the sound
volume of the device. All
sounds of the application are
affected.
More / Settings / Sound
and Warnings / Volume
/ Master slider
This switch mutes all sounds
of the device. Tap again to reenable sounds.
More / Settings / Sound
and Warnings / Volume
/ Master switch
,
This function lets you search
Find / Find Places /
for a Place along your route or Quick Search
around your current location
if there is no route calculated.
This button opens the list of
your Favorite destinations.
Find / Favorite
This button opens the History Find / History
list. You can select one of your
previous destinations.
36
This button opens the route
editing function.
My Route / Edit Route
This button opens the route
related settings.
More / Settings / Route
Settings
This button opens the map
related settings.
More / Settings / Map
Settings
VM9725BT
This button opens a special
n/a
screen with information about
the current position and a
button to search for nearby
emergency or roadside
assistance. For details, see the
next chapter.
This button cancels the route
and stops navigation. The
button is replaced with the
next one if waypoints are
given.
My Route / Cancel
Route
This button skips the next
waypoint from the route.
n/a
This button opens a 2D map
scaled and positioned to
show the entire route.
My Route / Overview
This button opens the Visual
Guidance settings screen.
More / Settings / Visual
Guidance
This button lets you bypass
parts of the recommended
route.
My Route / Avoidances
This button opens the Trip
More / Trip Monitor
Monitor screen where you can
manage your previously saved
trip logs and track logs.
This button opens the list of
maneuvers (the itinerary).
Tap the top of the
Map screen during
navigation.
With this function you can
save the active route for later
use.
My Route / More / Save
Route
37
VM9725BT
With this function you can
My Route / More / Load
replace the active route with a Route
previously saved route.
38
With this function you can
search for Places of Interest in
various different ways.
Find / Find Places
This button opens the Map
screen and starts simulating
the active route.
My Route / More /
Simulate Navigation
This button opens the GPS
Information screen with
satellite position and signal
strength information.
Tap the top of the Map
screen when there is no
GPS reception.
VM9725BT
Checking the Details of the Current Position (Where
Am I?)
Opened from the Quick menu, this screen contains information about the current
position (or about the last known position if GPS reception is not available) and a
button to search for useful Places nearby.
Information On This Screen:
•
and
: Latitude and Longitude (coordinate of the current position in
WGS84 format).
•
: Altitude (elevation information coming from the GPS receiver - often
inaccurate).
•
: House number on the left.
•
: House number on the right.
• In the middle of the screen you can see whether the position is current, or the
time left since it was last updated.
• Address details (when available) of the current position are also displayed at the
bottom.
39
VM9725BT
You can also perform some actions on this screen:
Tap
to save the current position as a Favorite destination.
You can also search for assistance near your current position. Tap
open a new screen for the Quick search:
The following services can be searched around the current position or the last
known position:
•
: Car repair and roadside assistance services
•
: Medical and emergency services
•
: Police stations
•
: Gas stations
Tap any of the buttons, select a Place from the list, and navigate to it.
40
to
VM9725BT
NAVIGATING
You can set up your route in different ways:
• If you need a route for immediate navigation, you can select the destination and
start navigating to it right away (normal navigation).
• You can also plan a route independently of your current GPS position or even
without GPS reception (to achieve this, you need to turn off the GPS receiver
and set a new starting point in My Route / Edit Route by tapping the flag icon at
the current position).
You can plan routes with multiple destinations. Select the first destination. Then
select a second destination and add it to your route to create a multi-point route.
You can add as many destinations to your route as you like.
SELECTING THE DESTINATION OF A ROUTE
iGO primo offers you several ways of choosing your destination:
• Enter a full address or a part of an address, for example a street name without a
house number or the names of two intersecting streets.
• Enter an address with ZIP code. This way you do not need to select the name of
the city and the search for street names might be faster as well.
• Use a built-in Place of Interest as your destination.
• Select a location on the map with the Find on Map feature.
• Use a previously saved Favorite destination.
• Select a location from the History of previously used destinations.
• Enter the coordinate of the destination.
• Use the location where a photo was taken.
Entering an Address or a Part of the Address
If you know at least a part of the address, it is the quickest way to select the
destination of the route.
Using the same screen, you can find an address by entering:
• the exact address, including house number
• the center of a city/town
• an intersection
• the midpoint of a street
• any of the above, starting the search with the ZIP code.
41
VM9725BT
Entering an Address (United States)
To enter an address as the destination, do as follows:
1.
If you are on the Map screen, tap
Navigation menu.
to return to the
,
2. In the Navigation menu, tap the following buttons:
3. By default, iGO primo proposes the country and state where you are. If
needed,
, enter the first few letters of the destination country or
tap
state on the keyboard, and select one from the list. If you select a country
without a state, you can search for a city/town in all its states.
4. Select a new city/town:
a. Tap
. The city/town of your current location is offered by
default. For a local search, tap
to accept it, otherwise continue with
entering the destination city/town name.
b. Start entering the name of the city/town on the keyboard.
c. Find the city/town you need:
• The most likely city/town name is always shown in the input field.
To accept it, tap
42
.
.
VM9725BT
• If the desired name does not show up, the names that match the string
appear in a list after entering a couple of characters (to open the list of
results before it appears automatically, tap
town from the list.
). Select the city/
5. Enter the street name:
.
a. Tap
b. Start entering the street name on the keyboard.
c. Find the street you need:
• The most likely street name is always shown in the input field.
To accept it, tap
.
• If the desired name does not show up, the names that match the string
appear in a list after entering a couple of characters (to open the list of results
before it appears automatically, tap
list.
). Select the street from the
43
VM9725BT
6. Enter the house number:
.
a. Tap
b. Enter the house number on the keyboard. (To enter letters, tap
).
to finish entering the address. (If the entered house
c. Tap
number cannot be found, the midpoint of the street is selected as the
destination.)
7. A full screen map appears with the selected point in the middle. If necessary,
tap the map somewhere else to modify the destination. The Cursor (
appears at the new location. Tap
or tap
44
)
to confirm the destination,
to select a different destination.
VM9725BT
8. After a short summary of the route parameters, the map appears showing the
entire route. The route is automatically calculated.
Tap
your journey.
to modify route parameters, or tap
and start
Tip!
If you know that you will use this destination frequently, before
tapping
Favorites first: tap
to confirm the destination, put it on the list of your
then
, give a name for the new
to save the location. The map with the destination
Favorite, and tap
returns automatically. Now you can start your journey.
45
VM9725BT
Entering an Address (Canada)
To enter an address as the destination, do as follows:
1.
If you are on the Map screen, tap
to return to the
Navigation menu.
,
.
2. In the Navigation menu, tap the following buttons:
3. By default, iGO primo proposes the country, state and city where you are. If
, enter the first few letters of the destination
needed, tap
country or state on the keyboard, and select one from the list. If you select a
country without a state, you can search for a city/town in all its states.
4. If needed, select a new city/town:
.
a. Tap
b. Start entering the name of the city/town on the keyboard.
c. Find the city/town you need:
• The most likely city/town name is always shown in the input field.
To accept it, tap
46
.
VM9725BT
• If the desired name does not show up, the names that match the string
appear in a list after entering a couple of characters (to open the list of
results before it appears automatically, tap
town from the list.
). Select the city/
5. Enter the street name:
a. Tap
.
b. Start entering the street name on the keyboard.
c. Find the street you need:
• The most likely street name is always shown in the input field.
To accept it, tap
.
• If the desired name does not show up, the names that match the string
appear in a list after entering a couple of characters (to open the list of
results before it appears automatically, tap
from the list.
). Select the street
47
VM9725BT
6. Enter the house number:
.
a. Tap
b. Enter the house number on the keyboard. (To enter letters, tap
).
to finish entering the address. (If the entered house
c. Tap
number cannot be found, the midpoint of the street is selected as the
destination.)
7. A full screen map appears with the selected point in the middle. If necessary,
tap the map somewhere else to modify the destination. The Cursor (
appears at the new location. Tap
or tap
48
)
to confirm the destination,
to select a different destination.
VM9725BT
8. After a short summary of the route parameters, the map appears showing the
entire route. The route is automatically calculated.
Tap
your journey.
to modify route parameters, or tap
and start
49
VM9725BT
Entering an Address Starting with the Street Name (in the United States only)
You can leave the city/town name empty and start the search with the street
name. This way you can search in all streets of a state. Do as follows:
to return to the
If you are on the Map screen, tap
Navigation menu.
2. In the Navigation menu, tap the following buttons:
,
.
3. By default, iGo primo proposes the country and state where you are. If
needed, tap the button with the name of the country, enter the first few
letters of the destination country or state on the keyboard, and select a
country and state from the list. If you select the country without a state, this
function cannot work.
1.
4. Enter the street name:
.
a. Tap
b. Start entering the street name on the keyboard.
c. Find the street you need:
• The most likely street name is always shown in the input field.
To accept it, tap
50
.
VM9725BT
• If the desired name does not show up, the names that match the string
appear in a list after entering a couple of characters (to open the list of
results before it appears automatically, tap
from the list.
). Select the street
5. Enter the house number:
a. Tap
.
b. Enter the house number on the keyboard. (To enter letters, tap
).
to finish entering the address. (If the entered house
c. Tap
number cannot be found, the midpoint of the street is selected as the
destination.)
6. A full screen map appears with the selected point in the middle. If necessary,
tap the map somewhere else to modify the destination. The Cursor (
appears at the new location. Tap
or tap
)
to confirm the destination,
to select a different destination.
51
VM9725BT
7. After a short summary of the route parameters, the map appears showing the
entire route. The route is automatically calculated.
Tap
journey.
52
to modify route parameters, or tap
and start your
VM9725BT
Entering the Midpoint of a Street as the Destination
You can navigate to the midpoint of a street if the house number is not available:
1.
If you are on the Map screen, tap
to return to the
Navigation menu.
2. In the Navigation menu, tap the following buttons:
3. Select the country, state and city as described earlier.
4. Enter the street name:
,
.
.
a. Tap
b. Start entering the street name on the keyboard.
c. Find the street you need:
• The most likely street name is always shown in the input field.
.
To accept it, tap
• If the desired name does not show up, the names that match the string
appear in a list after entering a couple of characters (to open the list of
results before it appears automatically, tap
from the list.
). Select the street
53
VM9725BT
5. Instead of entering the house number, tap
street is selected as the destination.
. The midpoint of the
6. A full screen map appears with the selected point in the middle. If necessary,
tap the map somewhere else to modify the destination. The Cursor (
appears at the new location. Tap
)
to confirm the destination,
to select a different destination.
or tap
7. After a short summary of the route parameters, the map appears showing the
entire route. The route is automatically calculated.
Tap
your journey.
54
to modify route parameters, or tap
and start
VM9725BT
Selecting an Intersection as the Destination
To enter an address as the destination, do as follows:
1.
If you are on the Map screen, tap
to return to the
Navigation menu.
2. In the Navigation menu, tap the following buttons:
3. Select the country, state and city as described earlier.
4. Enter the street name:
,
.
a. Tap
.
b. Start entering the street name on the keyboard.
c. Find the street you need:
• The most likely street name is always shown in the input field.
.
To accept it, tap
• If the desired name does not show up, the names that match the string
appear in a list after entering a couple of characters (to open the list of
results before it appears automatically, tap
from the list.
). Select the street
55
VM9725BT
5. Enter the intersecting street name:
.
Tap
• If only a few intersecting streets exist, their list appears immediately.
• In case of a longer street, the keyboard screen appears. Start entering the
name of the intersecting street on the keyboard.
As soon as the street names that match the entered string can be shown on
one screen, their list appears automatically. Select from the list.
6. A full screen map appears with the selected point in the middle. If necessary,
tap the map somewhere else to modify the destination. The Cursor (
appears at the new location. Tap
or tap
56
)
to confirm the destination,
to select a different destination.
VM9725BT
7. After a short summary of the route parameters, the map appears showing the
entire route. The route is automatically calculated.
Tap
your journey.
to modify route parameters, or tap
and start
57
VM9725BT
Selecting a City/Town Center as the Destination
The city/town center is not the geometric center of the city but an arbitrary
point the map creators have chosen. In towns and villages, it is usually the most
important intersection; in larger cities, it is one of the important intersections.
to return to the
If you are on the Map screen, tap
Navigation menu.
2. In the Navigation menu, tap the following buttons:
3. Select the country and state as described earlier.
4. Select the destination city/town:
1.
,
.
a. Tap
.
b. Start entering the name of the city/town on the keyboard.
c. Find the city/town you need:
• The most likely city/town name is always shown in the input field.
.
To accept it, tap
• If the desired name does not show up, the names that match the string
appear in a list after entering a couple of characters (to open the list of
results before it appears automatically, tap
town from the list.
58
). Select the city/
VM9725BT
5. Instead of entering the street name, tap
. This way the center of
the displayed city/town becomes the destination of the route.
6. A full screen map appears with the selected point in the middle. If necessary,
tap the map somewhere else to modify the destination. The Cursor (
appears at the new location. Tap
)
to confirm the destination,
to select a different destination.
or tap
7. After a short summary of the route parameters, the map appears showing the
entire route. The route is automatically calculated.
Tap
your journey.
to modify route parameters, or tap
and start
59
VM9725BT
Entering an Address with a ZIP Code
1. All of the above address searching possibilities can be performed with
entering the ZIP code instead of the city name. Find below an example with a full
address:
to return to the
If you are on the Map screen, tap
Navigation menu.
2. In the Navigation menu, tap the following buttons:
3. Select the country and state as described earlier.
4. Enter a new city/town using its ZIP code:
1.
a. Tap
,
.
to open the numeric keypad.
b. Tap
c. Start entering the ZIP code.
d. Find the city/town you need:
• The most likely ZIP code is always shown in the input field.
.
To accept it, tap
• If the desired number does not show up, open the list of results by
tapping
60
. Select the ZIP code from the list.
.
VM9725BT
5. Enter the street name:
.
a. Tap
b. Start entering the street name on the keyboard.
c. Find the street you need:
• The most likely street name is always shown in the input field.
.
To accept it, tap
• If the desired name does not show up, the names that match the string
appear in a list after entering a couple of characters (to open the list of
results before it appears automatically, tap
from the list.
). Select the street
6. Enter the house number:
.
a. Tap
b. Enter the house number on the keyboard. (To enter letters, tap
).
to finish entering the address. (If the entered house
c. Tap
number cannot be found, the midpoint of the street is selected as the
destination.)
61
VM9725BT
7. A full screen map appears with the selected point in the middle. If necessary,
tap the map somewhere else to modify the destination. The Cursor (
appears at the new location. Tap
)
to confirm the destination,
to select a different destination.
or tap
8. After a short summary of the route parameters, the map appears showing the
entire route. The route is automatically calculated.
Tap
your journey.
62
to modify route parameters, or tap
and start
VM9725BT
Tips on Entering Addresses Quickly
When you are entering the name of a city/town or a street:
• Only those letters are offered on the keyboard that appear in possible search
results. All other characters are grayed out.
• As you are typing, the most likely result is always displayed in the input field. If
the guess is correct, tap
to select it.
• After entering a couple of letters, tap
the specified letters.
to list the items that contain
You can speed up finding an intersection:
• Search first for the street with a less common or less usual name; fewer letters
are enough to find it.
• If one of the streets is shorter, search for that one first. You can then find the
second one faster.
You can search for both the type and the name of a road. If the same word appears
in several names, for example in the name of streets, roads and avenues, you can
obtain the result faster if you enter the first letter of the street type: For example,
enter ‘PI A’ to obtain Pine Avenue and skip all Pine Streets and Pickwick Roads.
You can also search in ZIP codes. As ZIP codes consist of only a few characters, this
is usually faster than entering the name of the city/town.
63
VM9725BT
Selecting the Destination from the Places of Interest
You can select your destination from the Places of Interest included with iGo
primo. Using the same screen, you can find a Place in different ways:
• with the Quick search feature, you can quickly find a nearby Place by its name
• with the Preset search feature, you can find frequently searched types of Places
with only a few screen taps
• you can search for a Place by its category
• you can search for a Place by its name.
In addition, you can search for special services from the ‘Where Am I?’ screen.
Quick Search for a Place of Interest
The Quick search feature lets you quickly find a Place by its name. The search is
always carried out:
• along the recommended route if it exists or
• around your current location if there is no destination given.
1. Start the Quick search function:
• If you are on the Map screen, tap
and then tap
.
• If you are in the Navigation menu, tap
,
and then
tap
.
2. Using the keyboard, start entering the name of the Place.
3. After entering a few letters, tap
to open the list of Places with
names containing the entered character sequence.
64
VM9725BT
4. (Optional) The Places in the list are ordered by the length of the necessary
detour (when navigating a route) or by their distance from the current
position (when no destination is given).
.
If you need to reorder the list, tap
5. Browse the list if necessary and tap one of the list items. A full screen map
appears with the selected point in the middle. The name and address of the
Place is displayed at the top of the screen.
to see the details of the selected Place. Tap
6. (Optional) Tap
to return to the map.
7. If necessary, tap the map somewhere else to modify the destination. The
Cursor (
) appears at the new location. Tap
to confirm the
to select a different destination.
destination, or tap
8. After a short summary of the route parameters, the map appears showing the
entire route. The route is automatically calculated.
Tap
your journey.
to modify route parameters, or tap
and start
65
VM9725BT
Searching for a Place of Interest Using Preset Categories
The Preset search feature lets you quickly find the most frequently selected types
of Places.
1. If you are on the Map screen, tap
to return to the
Navigation menu.
,
.
2. In the Navigation menu, tap the following buttons:
3. The preset search categories appear:
• If an active route exists, gas stations are searched along the route.
• If there is no active route (destination is not selected), they are searched
around the current position.
• If the current position is not available either (no GPS signal), they are
searched around the last known position.
• If an active route exists, parking lots are searched around the destination of
the route.
• If there is no active route (destination is not selected), they are searched
around the current position.
• If the current position is not available either (no GPS signal), they are
searched around the last known position.
• If an active route exists, restaurants are searched along the route.
• If there is no active route (destination is not selected), they are searched
around the current position.
• If the current position is not available either (no GPS signal), they are
searched around the last known position.
• If an active route exists, accommodation is searched around the destination
of the route.
• If there is no active route (destination is not selected), they are searched
around the current position.
• If the current position is not available either (no GPS signal), they are
searched around the last known position.
66
VM9725BT
4. Tap any of the quick search buttons to get an instant list of Places.
5. (Optional) The Places in the list are ordered by their distance from the current
or last known position, from the destination or by the length of the necessary
detour.
If you need to reorder the list, tap
.
6. Browse the list if necessary and tap one of the list items. A full screen map
appears with the selected point in the middle. The name and address of the
Place is displayed at the top of the screen.
to see the details of the selected Place. Tap
7. (Optional) Tap
to return to the map.
8. If necessary, tap the map somewhere else to modify the destination. The
Cursor (
) appears at the new location. Tap
destination, or tap
to confirm the
to select a different destination.
67
VM9725BT
9. After a short summary of the route parameters, the map appears showing the
entire route. The route is automatically calculated.
Tap
your journey.
68
to modify route parameters, or tap
and start
VM9725BT
Searching for a Place of Interest by Category
You can search for Places of Interest by their categories and subcategories.
1.
If you are on the Map screen, tap
to return to the
Navigation menu.
2. In the Navigation menu, tap the following buttons:
,
.
3. Tap
.
4. Select the area around which the Place should be searched for:
• Tap
to search around the current position or if it is not
available, around the last know position. (The result list will be ordered by
the distance from this position.)
to search for a place within a selected city/town. (The
• Tap
result list will be ordered by the distance from the center of the selected city/
town.)
to search for a place around the destination of the active
• Tap
route. (The result list will be ordered by the distance from the destination.)
to search along the active route, and not around a
• Tap
given point. This is useful when you search for a later stopover that results
in a minimal detour only, such as searching for upcoming gas stations or
restaurants. (The result list will be ordered by the length of the necessary
detour.)
69
VM9725BT
5. (Optional) If you have selected
in.
, select the city/town to search
6. Select one of the main Place categories (e.g. Accommodation) or
tap
route.
to list all Places around the selected location or along the
7. Select one of the Place subcategories (e.g. Hotel or Motel) or
tap
to list all Places in the selected main category around the
selected location or along the route.
70
VM9725BT
8. Sometimes the list of brands in the selected Place subcategory appears. Select
to list all Places in the selected subcategory
one brand or tap
around the selected location or along the route.
9. Finally, the results appear in a list.
10. (Optional) The Places in the list are ordered by their distance from the current
or last known position, from the selected city/town, from the destination or by
the length of the necessary detour.
.
If you need to reorder the list, tap
11. Browse the list if necessary and tap one of the list items. A full screen map
appears with the selected point in the middle. The name and address of the
Place is displayed at the top of the screen.
to see the details of the selected Place. Tap
12. (Optional) Tap
to return to the map.
13. If necessary, tap the map somewhere else to modify the destination. The
Cursor (
) appears at the new location. Tap
destination, or tap
to confirm the
to select a different destination.
71
VM9725BT
14. After a short summary of the route parameters, the map appears showing the
entire route. The route is automatically calculated.
Tap
your journey.
72
to modify route parameters, or tap
and start
VM9725BT
Searching for a Place of Interest by Name
You can search for Places of Interest by their names. You can search around
different locations or along your route in the whole Place database or in one Place
category or subcategory only.
to return to the
If you are on the Map screen, tap
Navigation menu.
2. In the Navigation menu, tap the following buttons:
1.
,
.
.
3. Tap
4. Select the area around which the Place should be searched for:
• Tap
to search around the current position or if it is not
available, around the last know position. (The result list will be ordered by
the distance from this position.)
to search for a place within a selected city/town. (The
• Tap
result list will be ordered by the distance from the center of the selected city/
town.)
• Tap
to search for a place around the destination of the active
route. (The result list will be ordered by the distance from the destination.)
to search along the active route, and not around a
• Tap
given point. This is useful when you search for a later stopover that results
in a minimal detour only, such as searching for upcoming gas stations or
restaurants. (The result list will be ordered by the length of the necessary
detour.)
73
VM9725BT
5. (Optional) If you have selected
in.
, select the city/town to search
6. Tap
to search in all Places, or select one of the main Place
categories (e.g. Accommodation) to search in.
7. Tap
to search in the selected Place category or select one of the
Place subcategories (e.g. Hotel or Motel) to search in.
74
VM9725BT
8. Tap
if you have not done it before.
9. Using the keyboard, start entering the name of the Place.
10. After entering a few letters, tap
to open the list of Places with
names containing the entered character sequence.
11. (Optional) The Places in the list are ordered by their distance from the current
or last known position, from the selected city/town, from the destination or by
the length of the necessary detour.
If you need to reorder the list, tap
.
75
VM9725BT
12. Browse the list if necessary and tap one of the list items. A full screen map
appears with the selected point in the middle. The name and address of the
Place is displayed at the top of the screen.
to see the details of the selected Place. Tap
13. (Optional) Tap
to return to the map.
14. If necessary, tap the map somewhere else to modify the destination. The
Cursor (
) appears at the new location. Tap
to confirm the
to select a different destination.
destination, or tap
15. After a short summary of the route parameters, the map appears showing the
entire route. The route is automatically calculated.
Tap
your journey.
76
to modify route parameters, or tap
and start
VM9725BT
Selecting Nearby Assistance from ‘Where Am I?’
You can quickly search for nearby assistance from the ‘Where Am I?’ screen.
1.
On the Map screen, tap
2. Tap
to open the Quick menu.
, and then
.
3. Preset search categories appear, all for searching around the current position
(or around the last known position if the current position is not available):
•
: Car repair and roadside assistance services
•
: Medical and emergency services
•
: Police stations
•
: Gas stations
77
VM9725BT
4. Tap any of the quick search buttons to get an instant list of that type of Places.
5. (Optional) The Places in the list are ordered by their distance from the current
or last known position, from the selected city/town, from the destination or by
the length of the necessary detour.
.
If you need to reorder the list, tap
6. Browse the list if necessary and tap one of the list items. A full screen map
appears with the selected point in the middle. The name and address of the
Place is displayed at the top of the screen.
7. (Optional) Tap
to see the details of the selected Place. Tap
to return to the map.
78
VM9725BT
8. If necessary, tap the map somewhere else to modify the destination. The
Cursor (
) appears at the new location. Tap
to confirm the
destination, or tap
to select a different destination.
9. After a short summary of the route parameters, the map appears showing the
entire route. The route is automatically calculated.
Tap
your journey.
to modify route parameters, or tap
and start
79
VM9725BT
Selecting a Map Location as the Destination
1.
If you are on the Map screen, tap
to return to the
Navigation menu.
2. In the Navigation menu, tap the following buttons:
,
.
3. Locate your destination on the map: move and scale the map as needed.
4. Tap the location that you want to select as your destination.
The Cursor (
) appears.
5. Tap
to select the Cursor as the destination.
6. After a short summary of the route parameters, the map appears showing the
entire route. The route is automatically calculated.
Tap
your journey.
80
to modify route parameters, or tap
and start
VM9725BT
Selecting the Destination from Your Favorites
You can select a location that you have already saved as a Favorite to be your
destination.
1. Access the list of Favorites:
and then tap
.
• If you are on the Map screen, tap
• If you are in the Navigation menu, tap
2. The list of Favorite destinations is displayed.
and then tap
.
3. Tap the Favorite that you want to set as your destination. If necessary, browse
and enter a few letters from
down to see more of the list or tap
the name of the Favorite destination.
4. A full screen map appears with the selected point in the middle. The
Cursor (
) appears at the new location. Tap
destination, or tap
to confirm the
to select a different destination.
81
VM9725BT
5. After a short summary of the route parameters, the map appears showing the
entire route. The route is automatically calculated.
Tap
your journey.
82
to modify route parameters, or tap
and start
VM9725BT
Selecting One of the Most Likely Destinations (Smart
History)
The destinations that you have set earlier appear in the History list. Two of those
recent destinations are shown in the Destination menu for easy access. Smart
History offers these locations based on your navigation habits, using parameters
like the current time of day, the day of week, and the current location. The more
you use the navigation software, the better it can guess your desired destination.
If you are on the Map screen, tap
Navigation menu.
2. In the Navigation menu, tap
to return to the
1.
.
3. Tap the
or the
destination in the History field.
4. A full screen map appears with the selected point in the middle. The
Cursor (
) appears at the new location. Tap
destination, or tap
to confirm the
to select a different destination.
83
VM9725BT
5. After a short summary of the route parameters, the map appears showing the
entire route. The route is automatically calculated.
Tap
your journey.
84
to modify route parameters, or tap
and start
VM9725BT
Selecting a Recent Destination from the History
The destinations that you have set earlier appear in the History.
1.
Access the History:
• If you are on the Map screen, tap
and then tap
.
• If you are in the Navigation menu, tap
and then tap
.
2. The list of recent destinations appear. Smart History promotes three
destinations to the first page based on your previous routes (most likely
destinations). The rest of the destinations are ordered by time they were last
selected. If necessary, scroll the list to see earlier destinations.
3. Select a destination from the list.
4. A full screen map appears with the selected point in the middle. The
Cursor (
) appears at the new location. Tap
destination, or tap
to confirm the
to select a different destination.
85
VM9725BT
5. After a short summary of the route parameters, the map appears showing the
entire route. The route is automatically calculated.
Tap
your journey.
86
to modify route parameters, or tap
and start
VM9725BT
Entering the Coordinates of the Destination
You can also select a destination by entering its coordinate. Do as follows:
to return to the
1.
If you are on the Map screen, tap
Navigation menu.
2. In the Navigation menu, tap
.
3. Open the
menu and tap
.
4. You can enter the latitude and longitude values in any of the following
formats: decimal degrees; degrees and decimal minutes; or degrees, minutes
and decimal seconds.
5. (Optional) If necessary, tap
coordinate in UTM format.
6. When finished, tap
then
and enter the
.
87
VM9725BT
7. A full screen map appears with the selected point in the middle. The
Cursor (
) appears at the new location. Tap
to confirm the
destination, or tap
to select a different destination.
8. After a short summary of the route parameters, the map appears showing the
entire route. The route is automatically calculated.
Tap
your journey
88
to modify route parameters, or tap
and start
VM9725BT
Building a Route from the List of Destinations (Create
Route)
You can also build your route destination by destination from the My Route menu.
1.
If you are on the Map screen, tap
Navigation menu.
2. In the Navigation menu, tap
3. Tap
to return to the
.
.
4. There is only one line in the list of route points, the start point of the route,
normally the current GPS position.
to select the destination.
5. Tap
6. The Destination menu appears and you can select the destination of the route
the same way as described in the previous sections.
89
VM9725BT
7. When the new destination is selected, the list returns.
8. To add more destinations, tap
where you want to insert the new route
point in the list, and repeat the above procedure.
90
VM9725BT
VIEWING THE ENTIRE ROUTE ON THE MAP
It is easy to get a map overview of the active route. Do as follows:
If you are on the Map screen, tap
Navigation menu.
2. In the Navigation menu, tap
to return to the
1.
.
. The active route is displayed in its full length on the map
3. Tap
together with additional information and controls.
91
VM9725BT
CHECKING ROUTE PARAMETERS AND
ACCESSING ROUTE RELATED FUNCTIONS
You can check different parameters of the route recommended by iGo primo.
1.
If you are on the Map screen, tap
to return to the
Navigation menu.
.
2. In the Navigation menu, tap
3. The following pieces of information are displayed:
• The name and/or address of the destination.
• Warning icons (if any). They provide extra information about your route (e.g.
unpaved roads or toll roads to be taken).
• The total time of the route.
• The total length of the route.
• Estimated delay calculated from traffic events on your route.
• The symbol of the vehicle type used in route calculation.
• The route planning method (e.g. Fast).
4. You have the following options on this screen (for detailed instructions on
how to use them, see the next chapter):
to edit the route: to add or remove destinations or change
• Tap
their sequence. You can also set a route start point other than your current
location. This can be useful to plan and save a future trip.
• Tap
to display the entire route on the map.
• Tap
to bypass a part of the route.
• Tap
to delete the active route.
• Tap
to open a list with more options like selecting from route
alternatives, changing route parameters, simulating the route, saving the
active route or loading a previously saved route.
• Tap
92
to return to the Navigation menu.
VM9725BT
MODIFYING THE ROUTE
When navigation is already started, there are several ways to modify the active
route. The following sections show some of those options.
Selecting a New Destination When Already Having a
Route:
New Route, Waypoint or Final Destination
If you already have a recommended route and you select a new destination as
described in the above sections, the application will ask you whether to start a
new route, add a new waypoint (intermediate destination) to the route or append
the newly selected destination at the end of the current route.
• Tap
to plan a new route to the newly selected location. The previous
destination and waypoint(s) are deleted.
to add the newly selected location as an intermediate destination
• Tap
to your route. The other destinations of the route remain intact. Note: the new
waypoint is placed among destinations to keep the route optimal. To decide
where a waypoint should appear, use the Edit Route feature.
to append the newly selected destination at the end of the route. The
• Tap
other destinations of the route remain intact. The previous final destination is
now the last waypoint.
93
VM9725BT
Setting a New Starting Position for the Route
For normal navigation, all routes are planned from the current position. In order
to check future routes, simulate them or see their length in time and distance, you
can turn off the GPS receiver. Then you can set the starting point of the route to a
different location than the current GPS position.
If you are on the Map screen, tap
Navigation menu.
2. In the Navigation menu, tap
to return to the
1.
3. If you already have a route, tap
If you are starting a new route, tap
94
.
.
.
VM9725BT
4. The first line is the start of the route, normally the current GPS position.
Tap
and confirm your action at the warning message.
5. The Destination menu appears and you can select the start point of the route
the same way you select a destination.
6. When the new start point is set, tap
.
7. The map returns with a transparent Vehimarker (showing that there is no GPS
reception). If an active route already existed, it is now recalculated starting
from the selected location.
8. To return to normal navigation, tap
.
95
VM9725BT
Editing the List of Destinations (Edit Route)
You can edit the route by modifying the list of destinations. You can add or remove
destinations, modify the start position or reorder the list.
If you are on the Map screen, tap
Navigation menu.
2. In the Navigation menu, tap
to return to the
1.
3. If you already have a route, tap
.
.
4. You have the following options:
• Tap
to add a new destination.
• Tap
to delete a destination.
• Tap
to modify the start point of the route.
• Tap
to reorder the list. You can do it manually or you can let
the application optimize the route for you.
96
VM9725BT
Pausing the Active Route
You do not need to pause the active route: when you start driving again, iGo
primo restarts the voice instructions from your position.
Canceling the Active Route
To cancel the navigated route, do one of the following:
• If you are on the Map screen, tap
and then tap
(If you have a route with waypoints, you need to tap
are deleted.)
and then tap
• In the Navigation menu, tap
active route is deleted with all its waypoints.
.
until all waypoints
. The
97
VM9725BT
Checking Route Alternatives when Planning the Route
You can select from different route alternatives or change the route planning
method after you have selected a new destination. Do as follows:
1. Select a destination as explained earlier, and go to the route confirmation
screen.
2. Tap
.
3. Tap
.
4. You see the basic details of three route alternatives with the selected route
planning method. Tap any of them to see it on the map.
98
VM9725BT
5. Or if you cannot find a good alternative, tap
routes with different routing methods.
and scroll down for
6. Select one of the route alternatives and tap
to return to the
previous screen. iGo primo recalculates the route. The orange line now shows
the new recommended route.
Checking Route Alternatives for an Existing Route
To recalculate the active route with a different route planning method, you
can modify the Route settings. There is another way to do this and to compare
different route alternatives with the same route planning method. Do as follows:
1.
to return to the
If you are on the Map screen, tap
Navigation menu.
2. In the Navigation menu, tap
.
99
VM9725BT
3. Tap
.
4. Tap
.
5. You see the basic details of three route alternatives with the selected route
planning method. Tap any of them to see it on the map.
6. Or if you cannot find a good alternative, tap
routes with different routing methods.
and scroll down for
7. Select one of the route alternatives then tap and hold
for a few
seconds to return to the Map screen. iGo primo recalculates the route. The
orange line now shows the new recommended route.
100
VM9725BT
Changing the Vehicle Used in Route Planning
To recalculate the active route for a different vehicle, do as follows. These changes
can also be made in Settings.
1.
On the Map screen, tap
2. Tap
and then tap
.
and then tap one of the following:
•
•
•
•
•
•
3. iGo primo recalculates the route optimized for the new vehicle type. The
orange line now shows the new recommended route.
Note!
and you forget to change it back to a vehicle later, the
If you select
software warns you when you travel with a speed that is too high for a pedestrian.
You are allowed to switch back instantly to
.
101
VM9725BT
Changing the Road Types Used in Route Planning
To recalculate the active route with different road type preferences, do as follows.
These changes can also be made in Settings.
1.
On the Map screen, tap
and then tap
.
2. Tap any of the listed road types to modify the route. If needed, scroll the list
for all road types. You have the following options (their order depends on the
selected vehicle type):
•
- You might need to avoid freeways when you are driving a slow
car or you are towing another vehicle.
•
- Charge roads are pay roads where you can purchase a pass or
vignette to use the road for a longer period of time. They can be enabled or
disabled separately from toll roads.
•
- iGo primo includes toll roads (pay roads where there is a peruse charge) in the routes by default. If you disable toll roads, iGo primo plans
the best toll-free route.
•
- iGo primo includes ferries in a planned route by default.
However, a map does not necessarily contain information about the
accessibility of temporary ferries. You might also need to pay a fare on ferries.
•
- iGo primo excludes unpaved roads by default: unpaved roads
can be in a bad condition and usually you cannot reach the speed limit on
them.
•
- Carpool or HOV lanes can be used if a given number of
passengers are traveling in the vehicle. You should check whether you are
allowed to use carpool lanes before enabling this road type.
3. Tap
to confirm the changes. iGo primo recalculates the route.
The orange line now shows the new recommended route.
102
VM9725BT
SAVING A LOCATION AS A FAVORITE
DESTINATION
You can add any location to Favorites, the list of frequently used destinations.
1. Select a destination as described before. It can be an address, a Place, any
location on the map, a previously used destination from History, a coordinate
or a location where a photo was taken.
2. When the full screen map appears with the selected location in the middle,
tap
.
3. Tap
.
4. (Optional) Using the keyboard, you can change the name offered for the
Favorite. Tap
5. Tap
to enter numbers or symbols.
to save the location as a new Favorite destination.
103
VM9725BT
SAVING A LOCATION AS AN ALERT POINT
You can save any map location as an alert point (for example a speed camera or a
railroad crossing).
1. Browse the map and select a location. The red Cursor appears there.
2. Tap
.
3. Scroll down the list and tap
.
4. On the newly opened screen, select the type of the alert point, the direction
from which you expect the alert, and (if applicable) the speed limit for this
alert point.
5. Tap
104
to save the location as a new alert point.
VM9725BT
EDITING AN ALERT POINT
You can edit a previously saved or uploaded alert point (for example a speed
camera or a railroad crossing).
1. Browse the map and select the alert point to edit. The red circle appears
around the alert point.
2. Tap
.
3. Scroll down the list and tap
.
4. On the newly opened screen, modify the type of the alert point, the direction
from which you expect the alert, or (if applicable) the speed limit for this alert
point.
5. Tap
to save the changes to the alert point.
105
VM9725BT
WATCHING THE SIMULATION OF THE ROUTE
You can run a simulated navigation that demonstrates the active route. Do as
follows:
1. If you are on the Map screen, tap
to return to the
Navigation menu.
2. In the Navigation menu, tap
3. Tap
.
.
4. Scroll down the list and tap
. The simulation starts from the
starting point of the route, and using a realistic speed, it leads you through the
whole recommended route.
106
VM9725BT
5. (Optional) You have the following controls during the simulation (the control
buttons disappear after a few seconds but you can open them again if you tap
the map):
•
: Jump to the next route event (maneuver).
•
: Pause the simulation.
•
: Jump to the previous route event (maneuver).
•
: Tap to increase the speed of the simulation to 4, 8 or 16 times faster.
Now tap again to return to the normal speed.
6. Tap
to stop the simulation.
107
VM9725BT
This page intentionally left blank.
108
VM9725BT
REFERENCE GUIDE
On the following pages you will find the description of the different concepts and
menu screens of iGo primo.
CONCEPTS
Smart Zoom
Smart Zoom provides much more than just a usual automatic zoom feature:
• While following a route: when approaching a turn, it will zoom in and raise the
view angle to let you easily recognize your maneuver at the next junction. If the
next turn is at a distance, it will zoom out and lower the view angle to be flat so
you can see the road in front of you.
• While driving without an active route: Smart Zoom will zoom in if you drive
slowly and zoom out when you drive at high speed.
Daytime and Night Color Themes
iGo primo uses different color themes during the day and during the night for
both the map and the menu screens.
• Daytime colors are similar to paper road maps, and the menus are bright.
• The night color themes use dark colors for large objects to keep the average
brightness of the screen low.
iGo primo offers different daytime and night color profiles. It can also switch
automatically between the daytime and the night schemes based on the current
time and GPS position a few minutes before sunrise, when the sky has already
turned bright, and a few minutes after sunset, before it becomes dark.
109
VM9725BT
Route Calculation and Recalculation
iGo primo calculates the route based on your preferences:
Route planning methods:
•
: Gives a quick route if you can travel at or near the speed limit on
all roads. Usually the best selection for fast and normal cars.
•
: Gives a route that has the smallest total distance of all possible
routes. It can be practical for slow vehicles.
•
: Gives a quick but fuel efficient route based on the fuel
consumption data given in Green Routing settings (page 88). Travel cost and
CO2 emission calculations are estimations only. They cannot take elevations,
curves and traffic conditions into account.
•
: Results in a route with fewer turns and no difficult maneuvers.
With this option, you can make iGo primo to take, for example, the freeway
instead of a series of smaller roads or streets.
Vehicle types:
• Maneuver restrictions and directional constraints are taken into account when
planning a route.
• Roads are used only if access for cars is allowed.
• Private roads and resident-only roads are used only if they are inevitable to
reach the destination.
• Walkways are excluded from routes.
• Neither maneuver restrictions nor directional constraints are taken into account
when planning a route.
• Roads are used only if access for pedestrians is allowed.
• Controlled-access roads are excluded from routes.
• A private road is used only if the destination is there.
• Speed limits are not used in route calculation and an average walking speed is
used when calculating the estimated time of arrival.
110
VM9725BT
• Maneuver restrictions and directional constraints (if they are applied to bicycles
in the map data) are taken into account when planning a route.
• Roads are used only if access for bicycles or pedestrians is allowed.
• Controlled-access roads are excluded from routes.
• A private road is used only if the destination is there.
• Speed limits are not used in route calculation and an average cycling speed is
used when calculating the estimated time of arrival.
• All maneuvers are available in intersections.
• Directional constraints are taken into account the way that opposite direction is
allowed with a low speed.
• A private road is used only if the destination is there.
• Walkways are excluded from routes.
• Maneuver restrictions and directional constraints are taken into account when
planning a route.
• Roads are used only if access for buses is allowed.
• Private roads, resident-only roads and walkways are excluded from routes.
• Maneuver restrictions and directional constraints are taken into account when
planning a route.
• Roads are used only if access for taxis is allowed.
• Private roads, resident-only roads and walkways are excluded from routes.
111
VM9725BT
Road types used or avoided in route calculation:
•
•
•
•
•
•
Whenever data exist, route calculation takes into account statistical traffic data for
the given day of week and time of day.
Real-time Traffic events are also taken into account and sometimes greatly modify
the route.
iGo primo automatically recalculates the route if you deviate from the proposed
itinerary or if a newly received Traffic event concerns a part of the recommended
route.
112
VM9725BT
Green Routing
Route calculation is not only about finding the quickest or shortest route. For
some of the vehicle types, you can also check the fuel consumption and CO2
emission when planning a route, and you can create cost effective routes with less
effect on the environment.
to enter the necessary parameters of your vehicle
In Settings, select
and the average fuel price. You can also select whether you want to see the
difference between your route and the green route even if the selected routing
method is not Green.
as route planning
After the above parameters are set, select
method to get a fast but also fuel efficient route. Note that travel cost and CO2
emission calculations are estimations only. They cannot take elevations, turns,
curves and traffic conditions into account. Also, this routing is not meant to give
you the “greenest” route of all. It is still important to travel quickly so the result is a
fast route with low fuel consumption and CO2 emission.
With a vehicle type where green routing is selectable, whichever route planning
method is selected, the Green details are also shown when you confirm the route:
If the selected route planning method is not Green, and you have allowed the
application to show the green alternative, the price, fuel consumption and CO2
emission differences between your selected route and the Green route are also
shown on this screen:
Tap the field with these details to switch the route to Green immediately.
113
VM9725BT
Road Safety Cameras and Other Proximity Alert Points
There is a special proximity warning for road safety cameras (like speed or red
light cameras) and other proximity alert points (like schools or railroad crossings).
These alert points are preloaded in iGo primo. You can download more from www.
naviextras.com or you can upload points in a specific text file if needed.
You can also add your own alert points or edit the preloaded or uploaded points.
The application can warn you when you approach road safety cameras like speed
cameras or dangerous areas like school zones or railroad crossings. You can set up
the different alert types individually in Sound and Warning settings.
The following alert types are available:
• Audio warning: beeps or the spoken type of the alert can be played while you
are approaching one of these points, or extra alert sounds if you exceed the
given speed limit while approaching.
• Visual warning: the type of the alert point, its distance and the related speed
limit appear on the Map screen while you are approaching one of these
cameras. The distance from the camera is also displayed.
For some of the alert points, the enforced or expected speed limit is available. For
these points, the audio alert can be different if you are below or above the given
speed limit.
• Only when speeding: The audio alert is only played when you exceed the given
speed limit.
• When approaching: The audio alert is always played. In order to draw your
attention, the alert can be different if you exceed the speed limit.
Note!
The warning for road safety cameras is disabled when the GPS position is not yet
available or if you are in certain countries where road safety camera warning is
prohibited.
Speed Limit Warning
Maps may contain information about the speed limits of the road segments. iGo
primo is able to warn you if you exceed the current limit. This information may
not be available for your region (ask your local dealer), or may not be fully correct
for all roads in the map. Speed warning can be fine-tuned in Sound and Warning
settings.
You can set the relative speed above which the application initiates the warning.
The following alert types are available:
• Audio warning: you receive a verbal warning when you exceed the speed limit
with the given percentage.
• Visual warning: the current speed limit is shown on the map when you exceed it
).
(for example:
You can also choose to see the speed limit sign on the map all the time.
114
VM9725BT
GPS Position Quality Indicators
You can find useful information in the top corners of menu screens.
In the top right corner, the GPS reception quality icon shows the current accuracy
of the position information.
Icon
Description
iGo primo has no connection to the GPS receiver: GPS
navigation is not possible.
Devices with a built-in GPS receiver are permanently
connected. On such devices, the icon does not appear in
normal circumstances.
iGo primo is connected to the GPS receiver, but the
signal is too weak and the receiver cannot determine the
GPS position.
GPS navigation is not possible.
Only a few satellites are received. Position information is
available, but elevation (altitude) cannot be calculated.
GPS navigation is possible, but the position error may be
significant.
Altitude information is available, the position is a 3D
position.
GPS navigation is possible.
Stored Traffic Information In Route Planning
The recommended route is not always the same between two points. Offline
statistical traffic information (historical speed information or traffic patterns)
can be taken into account in the route calculation based on the time of day and
the day of week whenever suitable data exists. This function is subject to data
availability.
Smart Routes with Stored Statistical Traffic Information
If statistical traffic information is stored with the map data, iGo primo can take
them into account when planning a route. In normal cases, these statistics help
you avoid usual traffic jams on the given day of week in the given hour but in
some cases like on public vacations that fall on normal weekdays, they can be
misleading.
115
VM9725BT
‘MORE’ MENU
The ‘More’ menu provides you with various options and additional applications.
Tap the following buttons:
Button
,
.
Description
You can configure the program settings, and modify the
behavior of iGo primo. Fine-tune route planning options,
change the look of the Map screen, turn on or off warnings,
or restart the Configuration wizard, etc. See the next chapter
for details.
Visit www.naviextras.com to get additional content, such as
new maps or 3D landmarks and useful applications.
The Fuel Consumption monitor helps you keep track of the
consumption of your car even if you do not use navigation
for all your journeys. Set the initial odometer value and then
record the distance taken and fuel filled in whenever you fill
your car.
You can also set reminders for regular car maintenance.
Tap this button to see the sunlit and dark areas of the world.
Your current location and route points are marked on the
map. Tap the Details button to see the exact sunrise and
sunset times for all your route points (your current location,
all waypoints and the final destination).
116
VM9725BT
If you save your trip logs when you arrive at some of your
destinations or let the application automatically save the trip
logs for you, those logs are all listed here.
Tap one of the trips to see the trip statistics, speed and
altitude profile. If track log has also been saved, you can
display it on the map with the selected color.
Track logs can be exported to GPX files for later use.
Select a country from the list and see useful driving
information about the selected country. Information may
include speed limits on different road types, the maximum
blood alcohol level and any compulsory equipment you
need to show when stopped by the police.
Run the Demo to watch sample route simulations to see
how navigation works.
The About section provides you with product information.
Read the Software and Database End User License
Agreement, look up content licenses or check the unique
identifier of the software. You can also access program usage
statistics.
117
VM9725BT
SETTINGS MENU
You can configure the program settings, and modify the behavior of iGo primo.
Tap the following buttons:
,
The Settings menu has several options. Tap
full list.
Button
,
.
or scroll with your finger to see the
Description
Adjust the sound volume, mute your device or
change the voice guidance language. In addition, you
can enable and set up different warnings and alerts.
The content of the Quick menu is fully customizable.
Tap the button you want to change, and select its new
function from the list.
The recommended route is not always the same
between two points. Whenever suitable data
exists,offline statistical traffic information (historical
traffic data or traffic patterns) can be taken into
account in the route calculation based on the time of
day and the day of week.
This function is subject to data availability.
Tap the button to set up these functions.
These settings determine how routes will be
calculated. Select the type of vehicle you are driving,
the road types used in route planning, and the route
planning method.
These settings determine how Green routes will be
calculated. They are also used to display the cost and
CO2 emission of routes.
118
VM9725BT
You can fine-tune the appearance of the Map screen.
Adjust the map view to your needs, choose suitable
color themes from the list for both daytime and night
use, change the red arrow to a 3D car model, show or
suppress 3D buildings, turn track logging on or off,
and manage your Place visibility sets (which Places to
show on the map).
Settings related to guidance on the map screen can
be adjusted here.
Display related settings include menu animations,
separate skins for daytime and night use and the
brightness of the display.
These settings allow you to customize the application
for your local language, measurement units, time and
date settings and formats, as well as to choose the
time zone.
Trip logs and track logs contain useful information
about your trips. Trip logs can be saved manually
when you reach your destination or you can turn on
the automatic saving here.
Modify the basic software parameters set during the
initial setup process.
Delete all saved data and reset all settings to their
factory defaults.
119
VM9725BT
Sound and Warnings
Adjust the sound volume, mute your device or change the voice guidance
language. In addition, you can enable and set up different warnings and alerts.
Button
Description
Tap this button to adjust the volume of the different
sounds in the application. A new screen shows the
different sound types and their controls. See below
for details.
This button shows the current voice guidance profile.
By tapping the button, you can select a new profile
from the list of available languages and speakers.
Tap any of these to hear a sample voice prompt.
Just tap
when you have selected the
new spoken language.
Maps may contain information about the speed limits
of the road segments. iGo primo is able to warn you if
you exceed the current limit. This information may not
be available for your region (ask your local dealer), or
may not be fully correct for all roads in the map. This
setting lets you decide whether you wish to receive
visible and/or audible warnings.
Adjust the slider to set the relative speed above which
the application initiates the warning.
The following alert types are available:
• Audio warning: you receive a verbal warning
when you exceed the speed limit with the given
percentage.
• Visual warning: the current speed limit is shown on
the map when you exceed it.
If you prefer to see the speed limit sign on the map
all the time (normally it is shown only if your speed
exceeds it), you can set it here.
120
VM9725BT
This feature allows you to receive a warning when
approaching a Road Safety Camera. You must ensure
on your own liability that using this feature is legal in
the country where you intend to use it.
This button is not displayed when GPS position is
not available or if you are in certain countries where
road safety camera warning is prohibited. Even if the
button is available, you are responsible for checking
whether it is legal to use this feature at your location.
Maps may contain driver alert information. Tap this
button to turn on or off these warnings and to set the
distance from the hazard to receive the warning at.
These can be set individually for the different warning
types.
The application can warn you when you approach
road safety cameras like speed cameras or dangerous
areas like school zones or railroad crossings. Tap this
button and set the different alert types individually.
The following alert types are available:
• Audio warning: beeps or the name of the alert
type can be played while you are approaching
the camera, or extra alert sounds if you exceed
the speed limit while approaching one of these
cameras.
• Visual warning: the type of the alert point, its
distance and the related speed limit appear on
the Map screen while you are approaching one of
these cameras. The distance from the camera is also
displayed.
For some of the alert points, the enforced or expected
speed limit is available. For these points, the audio
alert can be different if you are below or above the
given speed limit.
• Only when speeding: The audio alert is only played
when you exceed the given speed limit.
• When approaching: The audio alert is always
played. In order to draw your attention, the alert
can be different if you exceed the speed limit.
Road safety cameras are not displayed in the list
when GPS position is not available or if you are in
certain countries where road safety camera warning is
prohibited.
121
VM9725BT
You can control the volume of the following sound types:
Button
Description
This is the main volume control. These controls affect
all below sounds. They can also be accessed from the
Quick menu.
These controls affect the volume of the guidance
sounds (verbal instructions).
These controls affect the volume of the alert sounds
(beeps).
These controls affect the volume of the background
music.
Key sounds provide audible confirmation of tapping
the touch screen. These controls affect key sounds.
Controls for each sound type:
Button
Description
Volume Slider
Adjusts the volume of the related
sound.
Use the switch to mute the related
sound. The slider becomes inactive.
Tap again to re-enable.
122
VM9725BT
Customize Quick Menu
The content of the Quick menu is fully customizable. Tap the button you want to
change, and select its new function from the list.
Traffic Settings
The recommended route is not always the same between two points.
Whenever suitable data exists, offline statistical traffic information (historical
speed information or traffic patterns) can be taken into account in the route
calculation based on the time of day and the day of week.
This function is subject to data availability.
Button
Description
Use this switch to enable or disable historical
traffic data and traffic patterns. This locally
stored information can be very useful in normal
circumstances but for example on public vacations
it may be better to turn off in order not to take into
account normal weekday traffic jams.
123
VM9725BT
Route Settings
These settings determine how routes will be calculated.
Button
Description
You can set the type of vehicle you will use to
navigate the route. Based upon this setting, some
of the road types can be excluded from the route,
or some of the restrictions may not be taken into
account in route calculation.
The route calculation can be optimized for different
situations and vehicle types by changing the planning
method. See below for details.
To let the route fit your needs, you can also set which road types are to be
considered for or to be excluded from the route if possible.
Excluding a road type is a preference. It does not necessarily mean total
prohibition. If your destination can only be accessed using some of the excluded
road types, they will be used but only as much as necessary. In this case a
warning icon will be shown on the My Route screen, and the part of the route not
matching your preference will be displayed in a different color on the map.
In the list of road types you can see in how many segments and what total length
of the road type is used in the current route.
Button
Description
You might need to avoid freeways when you are
driving a slow car or you are towing another vehicle.
Charge roads are pay roads where you can purchase a
pass or vignette to use the road for a longer period of
time. They can be enabled or disabled separately from
toll roads.
iGo primo includes toll roads (pay roads where there
is a per-use charge) in the routes by default. If you
disable toll roads, iGo primo plans the best toll-free
route.
iGo primo includes ferries in a planned route by
default. However, a map does not necessarily contain
information about the accessibility of temporary
ferries. You might also need to pay a fare on ferries.
124
VM9725BT
iGo primo excludes unpaved roads by default:
unpaved roads can be in a bad condition and usually
you cannot reach the speed limit on them.
Carpool or HOV lanes can be used if a given number
of passengers are traveling in the vehicle. You should
check whether you are allowed to use carpool lanes
before enabling this road type.
Vehicle types:
• Maneuver restrictions and directional constraints are taken into account when
planning a route.
• Roads are used only if access for cars is allowed.
• Private roads and resident-only roads are used only they are inevitable to reach
the destination.
• Walkways are excluded from routes.
• Neither maneuver restrictions nor directional constraints are taken into account
when planning a route.
• Roads are used only if access for pedestrians is allowed.
• Controlled-access roads are excluded from routes.
• A private road is used only if the destination is there.
• Speed limits are not used in route calculation and an average walking speed is
used when calculating the estimated time of arrival.
• Maneuver restrictions and directional constraints (if they are applied to bicycles
in the map data) are taken into account when planning a route.
• Roads are used only if access for bicycles or pedestrians is allowed.
• Controlled-access roads are excluded from routes.
• A private road is used only if the destination is there.
• Speed limits are not used in route calculation and an average cycling speed is
used when calculating the estimated time of arrival.
125
VM9725BT
•
• All maneuvers are available in intersections.
• Directional constraints are taken into account the way that opposite direction is
allowed with a low speed.
• A private road is used only if the destination is there.
• Walkways are excluded from routes.
• Maneuver restrictions and directional constraints are taken into account when
planning a route.
• Roads are used only if access for buses is allowed.
• Private roads, resident-only roads and walkways are excluded from routes.
• Maneuver restrictions and directional constraints are taken into account when
planning a route.
• Roads are used only if access for taxis is allowed.
• Private roads, resident-only roads and walkways are excluded from routes.
Route Planning Method Types:
Button
Description
Gives a quick route if you can travel at or near the
speed limit on all roads. Usually the best selection for
fast and normal cars.
Gives a short route to minimize the distance to travel.
Usually practical for pedestrians, cyclists or slow
vehicles. Searching for a short route regardless of the
speed, this route type is rarely practical for normal
vehicles.
Gives a quick but fuel efficient route based on the
fuel consumption data given in Green Routing
settings. Travel cost and CO2 emission calculations
are estimations only. They cannot take elevations,
curves and traffic conditions into account.
Results in a route with fewer turns and no difficult
maneuvers. With this option, you can make iGo
primo to take, for example, the freeway instead of a
series of smaller roads or streets.
126
VM9725BT
Green Routing Settings
These settings determine how Green routes will be calculated. They are also used
to display the cost and CO2 emission of routes.
Button
Description
Enter the average consumption of your vehicle when
used in built-up areas.
If necessary, tap
select
and
to change the measurement unit.
Enter the average consumption of your vehicle when
used on highways.
If necessary, tap
select
and
to change the measurement unit.
Select the engine and fuel type of your vehicle. This
helps in estimating the CO2 emission.
Enter the average fuel price for travel cost calculation.
If necessary, tap
select
and
to change the measurement unit.
If the selected routing method is not Green, you
can have the best green alternative on screen when
selecting the route.
127
VM9725BT
Map Settings
You can fine-tune the appearance of the Map screen. Adjust the map view to your
needs, choose suitable color themes from the list for both daytime and night use,
change the red arrow to a 3D car model, show or hide 3D buildings, turn track
logging on or off, and manage you Place visibility sets (which Places to show on
the map).
The map is always shown on the screen so that you can see the effect when you
change a setting.
Button
Description
Switch the map view between a 3D perspective view
and a 2D top-down view.
Adjust the basic zoom and tilt levels to your needs.
Three levels are available.
Switch between daytime and night color modes
or let the software switch between the two modes
automatically a few minutes before sunrise and a few
minutes after sunset.
Select the color scheme used in daytime mode.
Select the color scheme used in night mode.
Replace the default position marker to one of the
3D vehicle models. You can select separate icons for
different vehicle types selected for route planning.
Separate icons can be used for car, pedestrian and the
other vehicles.
Show or suppress 3D landmarks, 3D artistic or block
representations of prominent or well-known objects.
128
VM9725BT
Show or suppress 3D city models, 3D artistic or block
representation of full city building data containing
actual building size and position on the map.
Turn on or off track log saving, that is, saving the
sequence of the locations your journeys go through.
Select which Places to show on the map while
navigating. Too many Places make the map crowded
so it is a good idea too keep as few of them on the
map as possible. For this, you have the possibility
to save different Place visibility sets. You have the
following possibilities:
• Tap the checkbox to show or hide the Place
category.
• Tap the name of the Place category to open the list
of its subcategories.
to save the current Place visibility
• Tap
set or to load a previously saved one. Here you can
also revert to the default visibility settings.
129
VM9725BT
Visual Guidance Settings
Settings related to guidance on the map screen can be adjusted here.
Button
Description
The data fields in the corner of the Map screen can
be customized. Tap this button and select the values
you want to see. The values can be different when
you navigate a route from when you are just cruising
without a given destination. You can select general
trip data like your current speed or the altitude, or
route data related to your final destination or the next
waypoint on your route.
If you are approaching a freeway exit or a complex
intersection and the needed information exists, the
map is replaced with a 3D view of the junction. You
can turn this feature on or let the map be displayed
for the whole route.
Whenever adequate information is available, lane
information similar to the real ones on road signs
above the road is displayed at the top of the map. You
can turn this feature on or off.
Turn on the route progress bar to see your route as a
straight line on the left side of the map. The red arrow
represents your current position and moves up as you
travel. Waypoints and Traffic events are also displayed
on the line.
130
VM9725BT
Display Settings
Display related settings include menu animations, separate skins for daytime and
night use and the brightness of the display.
Button
Description
When animation is turned on, buttons on menus and
keyboard screens appear in an animated way. Screen
transitions are also animated.
Select the style and colors of the application used in
daytime mode.
Select the style and colors of the application used in
night mode.
Adjust the display backlight.
Regional Settings
These settings allow you to customize the application for your local language,
measurement units, time and date settings and formats, as well as to choose the
time zone.
Button
Description
This button displays the current written language
of the user interface. By tapping the button, you
can select a new language from the list of available
languages. The application will restart if you change
this setting; you are asked to confirm this.
You can set the distance units to be used by the
program. iGo primo may not support all the listed
units in some voice guidance languages. Select
between 12 and 24 hours time display and the various
international date display formats.
By default, time zone is taken from the map
information and adjusted by your current location.
Here you can set time zone and daylight saving
manually.
131
VM9725BT
Trip Monitor Settings
Trip logs and track logs contain useful information about your trips. Trip logs
can be saved manually when you reach your destination or you can turn on the
automatic saving here. You can access these logs in the Trip monitor. Trip monitor
is available from the More menu.
Button
Description
Trip monitor can record statistical data of your trips. If
you need these logs later, you can let the application
save them automatically for you.
This is not a button. This line shows the current size
of the trip database, the sum of all trip and track logs
saved.
Track logs, the sequence of the positions given by the
GPS receiver, can be saved together with trip logs.
They can later be displayed on the map. You can let
the application save the track log whenever it saves a
trip.
132
VM9725BT
GLOSSARY
2D/3D GPS reception
The GPS receiver uses satellite signals to calculate its (your) position and needs
at least four signals to give a three-dimensional position, including elevation.
Because the satellites are moving and because objects can block the signals,
your GPS device might not receive four signals. If three satellites are available, the
receiver can calculate the horizontal GPS position but the accuracy is lower and
the GPS device does not give you elevation data: only 2D reception is possible.
Active route
The currently navigated route. Whenever the destination is set, the route is active
until you delete it, reach your destination or you quit iGo primo. See also: Route.
City Center
The city/town center is not the geometric center of the city but an arbitrary
point the map creators have chosen. In towns and villages, it is usually the most
important intersection; in larger cities, it is one of the important intersections.
Color theme
iGo primo comes with different color themes for daytime or night use of the
map and menu screens. Themes are custom graphic settings and they can have
different colors for streets, blocks or surface waters in 2D and 3D modes, and they
display shades or shadows in different ways in 3D mode.
One daytime scheme and one night scheme is always selected for the map and for
the menus. iGo primo uses them when it switches from day to night and back.
GPS accuracy
Several factors have impact on the deviation between your real position and
the one given by the GPS device. For example, signal delay in the ionosphere or
reflecting objects near the GPS device have a different and varying impact on how
accurately the GPS device can calculate your position.
Map
iGo primo works with digital maps which are not simply the computerized
versions of traditional paper maps. Similarly to the paper road maps, the 2D mode
of digital maps show you streets, roads, and elevation is also shown by colors.
You can use digital maps interactively: you can zoom in and out (increase or
decrease the scale), you can tilt them up and down, and rotate them left and right.
In GPS-supported navigation, digital maps facilitate route planning.
133
VM9725BT
North-up map orientation
In North-up mode the map is rotated so its top always faces North. This is the
orientation for example in Find on Map. See also: Track-up map orientation.
Road Safety Camera
Special alert points for speed, red light or bus lane cameras. Different data sources
are available. You can configure iGo primo to warn you when you approach one of
these cameras.
Detecting the location of Road Safety Cameras is prohibited in certain countries.
It is the sole responsibility of the driver to check whether this feature can be used
during the trip.
Route
A sequence of route events, i.e. maneuvers (for example, turns and traffic circles)
to reach the destination. The route contains one start point and one or more
destinations. The start point is the current (or last known) position by default.
If you need to see a future route, the start point can be replaced with any other
given point.
Track-up map orientation
In Track-up mode the map is rotated so its top always points in the current driving
direction. This is the default orientation in 3D map view mode. See also: North-up
map orientation.
Vehimarker
The current position is shown with a red arrow on the map by default. The
direction of the red arrow shows the current heading. This position marker can
be replaced with different vehicle and pedestrian symbols. You can even specify
different Vehimarkers for different route types (depending on which vehicle type
is selected for route calculation).
134
VM9725BT
END USER LICENSE AGREEMENT
1 The contracting parties
1.1 This Agreement has been entered into by and between NNG Kft. (registered
seat: 23 Bérc utca, H-1016 Budapest, Hungary; Company reg.no.: 01-09-891838)
as Licensor (hereinafter: Licensor) and You as the User (hereinafter: User; the User
and the Licensor jointly referred to as: Parties) in subject of the use of the software
product specified in this Agreement.
2 Conclusion of the Agreement
2.1 The Parties hereby acknowledge that this Agreement shall be concluded by
implicit conduct of the Parties without signing the Agreement,
2.2 The User hereby acknowledges that following the lawful acquisition of the
software product constituting the object of this Agreement (Section 4), any
degree of use, installation into a computer or other hardware, installation of such
hardware into a vehicle, pressing of the “Accept” button displayed by the software
during installation or use (hereinafter referred to as Use) shall mean that the User
has accepted the terms and conditions of this Agreement as legally binding.
2.3 This Agreement shall by no means authorise use of the software product
by those persons having unlawfully acquired the software product or having
unlawfully installed it on a computer or in a vehicle.
3 Relevant laws and regulations
3.1 Any action related to this Agreement will be governed by the laws of the
Republic of Hungary, with specific reference to Act IV of 1959 on the Civil Code
and to Act LXXVI of 1999 on Copyrights shall apply.
3.2 The original language version of this Agreement is the Hungarian version.
This Agreement has versions in other languages as well. In case of dispute the
Hungarian version shall prevail.
4 Object of the Agreement and Termination
4.1 The object of this Agreement shall be the navigation guidance software
product of Licensor (hereinafter referred to as the Software Product).
4.2 The Software Product shall include the operating computer program, its
complete documentation, the map database pertaining thereto and any thirdparty content and services accessible through the Software Product (hereinafter:
Database).
4.3 Any form of display, storage, coding, including printed, electronic or graphic
display, storage, source or object code, or any other as yet undefined form of
display, storage, or coding, or any medium thereof shall be deemed parts of the
Software Product.
4.4 Error corrections, additions, updates used by the User following the conclusion
of this Agreement shall also be deemed parts of the Software Product.
135
VM9725BT
4.5 Your rights under this Agreement will terminate immediately without notice
from Licensor if you materially breach it or take any action in derogation of
Licensor’s and/or its licensors’ rights to the Software Product. Licensor may
terminate this Agreement should any Software Product become, or in Licensor’s
reasonable opinion likely to become, the subject of a claim of intellectual property
infringement or trade secret misappropriation. Upon termination, you will cease
use of, and destroy Software Product and confirm compliance in writing to
Licensor
5 Rights under copyright
5.1 Unless otherwise provided by law or contractual provisions, the Licensor is the
sole and exclusive owner of all material copyrights vested in the Software Product.
5.2 Copyrights extend to the whole Software Product and to its parts separately as
well.
5.3 The owner(s) of the copyrights of the Database forming part of the Software
Product is (are) the natural person(s) or corporate entity(ies) listed in the Appendix
to this Agreement or in the “About” menu item of the operating computer
program (hereinafter referred to as Database Owner). The user’s manual of the
Software Product includes the name of the menu option where all the owners
of the Database items are listed. The Licensor hereby states that it has obtained
sufficient usage and representation rights from the Database owners in order to
utilize the Database, to offer it for utilization and to transfer it for utilization as set
forth in this Agreement.
5.4 Pursuant to this Agreement, all rights vested in the Software Product shall
remain in the ownership of the Licensor, except for those to which the User is
entitled under law or by virtue of this Agreement.
6 Rights of the User
6.1 The User is entitled to install the Software Product into one hardware device
(desktop, handheld, portable computer, navigation device), and to run and use
one copy of the Software Product or a preinstalled copy of the Software Product
thereon.
6.2 The User is entitled to make one backup copy of the Software Product.
However, if the Software Product operates after installation without the use of
the original media copy, then the original media copy shall be deemed to be a
backup copy. In all other cases, the User is only entitled to use the backup copy
if the original media copy of the Software Product has been ascertainably and
unequivocally rendered unsuitable for its lawful and intended use.
7 Limitations of use
7.1 The User is not entitled
7.1.1 to duplicate the Software Product (to make a copy thereof );
7.1.2 to lease, rent or lend it or to transfer it to a third person for any reason;
136
VM9725BT
7.1.3 to translate the Software Product (including translation (compilation) to
other programming languages);
7.1.4 to decompile the Software Product;
7.1.5 to evade the protection of the Software Product or to modify, circumvent or
obviate such protection through technological or by any other means;
7.1.6 to modify, extend, transform the Software Product (in whole or in part), to
separate it into parts, combine it with other products, install it in other products,
utilize it in other products, not even for the purpose of achieving interoperability
with other devices;
7.1.7 apart from using the computer program, to obtain information from the
Database as a part of the Software Product, to decompile the Database, to use,
copy, modify, extend, transform the Database in whole or in part or the group of
data stored therein, or to install it in other products or otherwise, utilize it in other
products or to transfer it, not even with the aim of achieving interoperability with
other products.
7.2 The User may only use the contents available through the Software Product
and provided by third parties and the data received through the services provided
by third parties (including but not limited to the traffic data received from the
RDS TMC traffic information service) for his/her own personal benefit and at his/
her own risk. It is strictly prohibited to store, to transfer or to distribute these data
or contents or to disclose them in full or in part to the public in any format or to
download them from the product.
8 No warranty, limitation of liability
8.1 The Licensor hereby informs the User that although the greatest care was
taken in producing the Software Product, given the nature of the Software
Product and its technical limitations, the Licensor does not provide a warranty for
the Software Product being completely error-free, and the Licensor is not bound
by any contractual obligation whereby the Software Product obtained by the User
should be completely error-free.
8.2 The Licensor does not warrant that the Software Product is suitable for any
purpose defined either by the Licensor or the User, and does not warrant that the
Software Product is capable of interoperating with any other system, device or
product (e.g. software or hardware).
8.3 The Licensor does not assume any responsibility for damages incurred due to
an error in the Software Product (including errors of the computer program, the
documentation and the Database).
8.4 The Licensor does not assume any responsibility for damages incurred due to
the Software Product not being applicable for any defined purpose, or due to the
error or incompatibility of the Software Product with any other system, device or
product (e.g. software or hardware).
137
VM9725BT
8.5 The Licensor also draws the attention of the User to the fact that, when using
the Software Product in any form of vehicle, observing the traffic regulations and
rules (e.g. use of obligatory and/or reasonable and suitable security measures,
proper and generally expected care and attention in the given situation, and
special care and attention required due to the use of the Software Product)
is the exclusive responsibility of the User. The Licensor shall not assume any
responsibility for any damages occurred in relation to use of the Software Product
in a motor vehicle.
8.6 By concluding the Agreement, the User shall, in particular, acknowledge the
information stated in Section 8 above.
9 Sanctions
9.1 The Licensor hereby informs the User that, if the Licensor finds its rights under
the Copyright Act to be breached, the Licensor may
9.1.1 seek judicial recognition of this breach;
9.1.2 demand that the breach cease and order the person in breach to refrain from
continuing such actions;
9.1.3 demand that the person under breach give proper compensation (even by
way of publicity at the expense of the person in breach);
9.1.4 claim the return of the increase of assets due to the breach;
9.1.5 demand the cease of the wrongful action and, demand restitution to its state
before the breach was committed at the expense of the person in breach, and may
demand the destruction of instruments and materials used to commit the breach
as well as of the products created by the breach;
9.1.6 claim for damages.
9.2 The Licensor hereby also informs the User that the breach of copyrights and
related rights is a crime under Act IV of 1978 on the Hungarian Criminal Code,
which may be sentenced of two years in prison in basic cases and up to eight
years in prison in aggravated cases.
9.3 Contents and services provided by third parties
The Licensor hereby excludes any liability of its own for the Database in the
Software Product and for any content or service provided by a third party by using
the Database. The Licensor does not warrant the quality, suitability, accuracy,
fitness for a specific purpose or territorial coverage of the product or service
or the availability of the service, and it specifically excludes any liability for the
suspension of the service, and any damage arising in relation to the service or for
complete cancellation of the service.
The relevant information and data in connection with the contents and services
provided by third parties are available at www.naviextras.com. The User hereby
acknowledges that the contents and services provided by third parties may only
be used at the risk of the User and for the personal benefit of the User.
138
VM9725BT
9.4 Contents and services provided by the Licensor or an agent of the Licensor
The Licensor or a contractual partner may offer various products and services to
the User through www.naviextras.com. The User may only use these services when
the User has read and understood the relevant end user license agreement(s) at
www.naviextras.com and the User is obliged to use the services in line with the
terms and conditions thereof.
9.5 The parties hereby agree that the courts of the Republic of Hungary will have
exclusive jurisdiction to rule on any disputes arising in connection with this
Agreement.
10. Anonymous data collection
10.1 The User hereby acknowledges that the Software Product may collect and
store data connected to the usage of the Software Product by the User (e.g.
movement/route data, user interaction data). Such data collection functions may
be disabled or enabled by User any time from within the corresponding menu.
The collected data is connected to the device type identifier of the device running
the Software Product and not associated in any way with any personal information
of the User or with the User itself.
10.2 The collected data may be uploaded to Licensor’s database and used
exclusively for the purpose of enhancing and improving the features and services
of the Software Product and the Databases. Uploading is executed through
Licensor’s special software or by the User navigation device, and the upload may
be enabled or disabled by User. After successful data upload, the collected data is
deleted from the Software Product storage media.
10.3 Collected data is transmitted, stored and handled anonymously and no
connection of the data with the User shall be established by Licensor or any third
party.
139
Audiovox Electronics Corporation
Hauppauge, NY 11788
Technical Assistance: 1-800-323-4815
www.jensen.com
© 2012 Audiovox
Printed in China
128-9064
•
0
0
~
0
0
~
a
••
Limited Warranty
DO NOT RETURN THIS PRODUCT TO THE STORE
CD or Multimedia Radios/Headunits
Audiovox Electronics Corporation (“the Company”) is committed to
quality and customer service, and are pleased to offer you this
Warranty. Please read it thoroughly and contact the Company at 1-800323-4815 with any questions.
Who is covered?
The Company extends this warranty to the original retail purchaser of products
purchased through an authorized Audiovox retailer in the U.S.A., Puerto Rico or
Canada. This warranty is not transferable or assignable. Proof of purchase is
required in the form of an original sales receipt.
What is covered?
The Company warrants that should this product or any part thereof, under normal
use, be proven defective in material or workmanship within 12 months from the
date of original purchase, such defect(s) will be repaired or replaced with a new or
reconditioned product (at the Company's option) without charge for parts and
repair labor.
What is not covered?
This Warranty does not cover the following:
•
Damage incurred during shipping or transporting the product to the
Company or a service center
•
Elimination of car static or motor noise
•
Defects in cosmetic, decorative or non-operative structural parts
•
Correction of antenna problems
•
Costs incurred for installation, removal or reinstallation of the product
•
Consequential damage to compact discs, USB devices, digital media
cards, accessories or vehicle electrical systems
•
Damage caused by improper installation, mishandling, misuse, neglect,
accident, blown fuse, battery leakage, theft or improper storage
•
Products whose factory serial number/bar code label(s) or markings
have been removed or defaced
•
Damage resulting from moisture, humidity, excessive temperature,
extreme environmental conditions or external natural causes
Please review the “Care and Maintenance” section of your Installation
and Operation Manual for additional information regarding the proper
use of your product.
Limitations
THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY
IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND,
IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE
PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED
WARRANTIES,
INCLUDING
ANY
IMPLIED
WARRANTY
OF
MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS
WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY
HEREUNDER
INCLUDING
ANY
IMPLIED
WARRANTY
OF
MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 24
MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE
COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS
OR IMPLIED, WHATSOEVER. No person or representative is authorized to
assume for the Company any liability other than expressed herein in connection
with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the
exclusion or limitation of incidental or consequential damage so the above
limitations or exclusions may not apply to you. This Warranty gives you specific
legal rights and you may also have other rights which vary from state to state.
Obtaining Warranty Service
• To obtain repair or replacement within the terms of this Warranty,
call 1-800-323-4815 for the location of a warranty station serving
your area.
• You must prepay the initial shipping charges to the Company.
The Company will pay the return shipping charges for all
warranteed products returned to an address within the U.S.A.,
Puerto Rico or Canada.
• Please package the product securely to avoid shipping damage.
We recommend using a carrier that provides tracking service to
prevent lost packages. Lost or damaged packages are not
covered by this warranty.
• Provide a detailed description of the problem(s) for which you
require service.