5717010021 / 08.09
De’Longhi Beverage Cabinet
Model
DEBC 145
USER GUIDE
© 2009 De’Longhi Australia Pty Ltd.
Please read this user guide carefully and retain for future reference
Contents
Warranty Information
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 03
The De’Longhi Beverage Cabinet is warranted
against faults resulting from manufacturing or
material defects. The warranty period for normal
domestic installation and use is three years from
the date of installation in your home. In nondomestic use De’Longhi limits the voluntary
warranty to 6 months.
De’Longhi Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04
Beverage Cabinet Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05
Installation Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 07
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08
- Warnings
- Before using your Beverage Cabinet
- Installation of your Beverage Cabinet
- Reversing the door swing of your appliance
- Installing Stainless Steel handle
Using your Beverage Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
- ON/OFF power
- To lock the control panel
- Setting the temperature control
- Interior light
- Door lock
- Shelves
De’Longhi undertakes to repair or replace the
Beverage Cabinet at our discretion if the product
is found to be defective due to a manufacturing
fault during the warranty period.
How to contact us about a warranty claim
Talk to a De’Longhi representative for further
warranty or product information please call the
number in your country:
Australia
www.delonghi.com.au
Phone: 1800 126 659
New Zealand
www.delonghi.co.nz
Phone: 0508 200 300
This warranty excludes any damage caused by
misuse, neglect, shipping accident, or incorrect
installation. Normal wear and tear is also
expressly excluded. The warranty claim is void if
no fault is found with the product or if work is
carried out by anyone other than an authorised
De’Longhi Service Agent.
In Australia, this warranty is additional to the
conditions and guarantees which are mandatory
as implied under the Trade Practices Act 1974
and State and Territory legislation.
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
- Cleaning your Beverage Cabinet
- Power failure
- Moving your Beverage Cabinet
- Energy saving tips
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Help us Help You . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
NOTE: Warranty is determined by unit
serial number and date of installation.
Page 2
Page 15
Help us Help You
Parts and Features
Read this guide carefully, it is intended to help
you operate and maintain your new Beverage
Cabinet properly.
Model: DEBC 145
Keep it handy to answer your questions. If
you don't understand something or you need
more assistance, please call the De’Longhi
Helpline.
To help us provide prompt answers to your
queries, please record your Beverage
Cabinet model and serial numbers. You’ll find
them on a plate located on the rear outside
wall of the Beverage Cabinet.
Beverage Cabinet details
1
8
°F
°F/ °C
°C
2
3
4
5
6
7
Before you call for service
Check the Troubleshooting Section on page
13. It lists causes of minor operating
problems that you can correct yourself.
Page 14
Components:
1. Digital control panel
2. UV tinted triple glaze door
3. Glass shelf (total 1)
4. Wire shelf (total 2)
5. Door Lock
6. Front Ventilation
7. Levelling legs (4)
8. Cabinet
Dimensions:
Height
Width
Depth
855mm
595mm
615mm
Page 3
De’Longhi’s Safety Precautions
Troubleshooting
De’Longhi pride themselves on their
innovative range of the highest quality
consumer products.
Ÿ
Beverage Cabinet does not operate
De’Longhi ensures all of its products are
100% safe through quality design and
manufacture. All products meet or exceed
stringent laboratory-tested safety
requirements.
Ÿ
It is necessary for anyone using an electrical
appliance to be safety conscious. The
following precautions are essential for the
safe use of an electrical appliance. Carefully
read all of the instructions provided with your
appliance:
Ÿ
Ÿ
Always turn the power off at the power
outlet before you insert or remove a plug.
Remove by grasping the plug, do not pull
on the cord.
Do not use your appliance with an
extension cord unless this cord has been
checked and tested by a qualified
technician or service person. The
extension cord must be a VDE-Listed, 3wire grounding extension cord that has a
grounding plug and outlet and that the
electrical rating of the cord is 220-240
volts and at least 10 amperes.
Ÿ
Ÿ
This appliance is designed exclusively for
household use. All other uses are strictly
forbidden.
The appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible for their
safety. Children should be supervised to
ensure that they do not play with the
appliance.
If the power cable is damaged, it must be
replaced by the manufacturer, an
authorised service centre or a qualified
electrician in order to eliminate all risk.
WARNING: Do not damage the refrigerant
circuit.
Ÿ
Ÿ
Ÿ
Not plugged in.
The appliance is turned off.
The circuit breaker tripped or a blown
fuse.
Ÿ
Ÿ
Ÿ
Check the temperature control setting.
External environment may require a
higher setting.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
Turns on and off frequently
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
The rattling noise may come from the flow
of the refrigerant, which is normal.
As each cycle ends, you may hear
gurgling sounds caused by the flow of
refrigerant in your Beverage Cabinet.
The Beverage Cabinet is not level.
The door will not close properly.
Ÿ
Ÿ
Ÿ
Ÿ
The Beverage Cabinet is not level.
The door was reversed and not properly
installed.
The gasket is dirty.
The shelves are out of position.
The room temperature is hotter than
normal.
A large amount of contents has been
added to the Beverage Cabinet.
The door is opened too often.
The door is not closed completely.
The temperature control is not set
correctly.
The door gasket does not seal properly.
The light does not work
Ÿ
Ÿ
Not plugged in.
The circuit breaker tripped or a blown
fuse.
The light button is “OFF”.
Always use your appliance from a power
outlet of the voltage (A.C. only) marked on
the appliance.
Ÿ
Do not use an appliance for any purpose
other than its intended use.
Ÿ
Do not attempt to repair an electrical
appliance. Return a damaged or
malfunctioning appliance to a qualified
service centre for adjustment or repair if
required.
Ÿ
The appliance must be positioned so the
AC plug is accessible.
If you have any concerns or questions
regarding the performance or use of your
appliance, please visit:
www.delonghi.com.au
or
www.delonghi.co.nz
Page 4
Ÿ
Beverage Cabinet is not cold enough
Ÿ
Ÿ
Ÿ
Ÿ
The Beverage Cabinet seems to make
too much noise.
Ÿ
Vibrations
Check to assure that the Beverage
Cabinet is level.
Consumer Help
Australia
Phone: 1800 126 659
Fax: 1800 007 289
New Zealand
Phone: 0508 200 300
Fax: 0508 200 301
Page 13
Care and Cleaning
Beverage Cabinet Safety Precautions
Cleaning your Beverage Cabinet
Moving your Beverage Cabinet
Ÿ
Turn off the power, unplug the appliance,
and remove all items including shelves.
Ÿ
Wash the inside surfaces with a warm
water and baking soda solution. The
solution should be about 2 tablespoons of
baking soda to a quart of water.
Ÿ
Ÿ
Ÿ
Turn the adjustable leg up to the base to
avoid damage.
Wash the shelves with a mild detergent
solution.
Ÿ
Ÿ
Tape the door shut.
Ÿ
Ÿ
Wring excess water out of the sponge or
cloth when cleaning area of the controls,
or any electrical parts.
Ÿ
Wash the outside cabinet with warm
water and mild liquid detergent. Rinse well
and wipe dry with a clean soft cloth.
Ÿ
Do not use steel wool or steel brush on the
stainless steel. These will contaminate the
stainless steel with steel particles and
rusting may occur.
Remove all items.
Securely tape down all loose items
(shelves) inside your appliance.
Be sure the appliance stays secure in the
upright position during transportation.
Also protect outside of appliance with a
blanket, or similar item.
Energy Saving Tips
Your safety and the safety of others is very
important. Safety messages are displayed in
this manual and on your appliance.
Read and obey these safety messages as they
will alert you to potential hazards and tell you
how to reduce the chance of injury.
The Beverage Cabinet should be located in
the coolest area of the room, away from heat
producing appliances, and out of the direct
sunlight.
Safety Alert Symbol
This symbol alerts you to potential hazards.
Power Failure
Most power failures are corrected within a few
hours and should not affect the temperature
of your appliance if you minimize the number
of times the door is opened.
DANGER
If the power is going to be off for a longer
period of time, you need to take the proper
steps to protect your contents.
WARNING
CAUTION
Page 12
Danger
Danger indicates a high level of risk to yourself and
others. Ensure that care is taken to avoid severe
injury or even death.
Warning
Warning indicates a moderate level of risk to
yourself, others and the product. Ensure that care
is taken to avoid extensive product damage or
serious injury.
Caution
Caution indicates a level of risk to yourself, others
and the product. Ensure care is taken to avoid
moderate product damage or injuries.
Page 5
Beverage Cabinet Safety Precautions
Before the appliance is used, it
must be properly positioned
and installed as described in
this manual, so read the
manual carefully. To reduce the
risk of fire, electrical shock or
injury when using the
appliance, follow basic
precaution, including the
following:
WARNING
FOLLOW WARNINGS BELOW ONLY
WHEN APPLICABLE TO YOUR MODEL
Ÿ
Ÿ
To ensure proper ventilation for your
appliance, the front of the unit must be
completely unobstructed. Choose a wellventilated area with temperatures above
60°F (16°C) and below 90°F (32°C). This
unit must be installed in an area protected
from the element, such as wind, rain,
water spray or drips.
Ÿ
The appliance should not be located next
to ovens, grills or other sources of high
heat.
DANGER
Ÿ
Plug into a grounded 3-prong outlet, do
not remove grounding prong, do not use
an adapter, and do not use an extension
cord.
Ÿ
It is recommended that a separate circuit,
serving only your appliance be provided.
Use receptacles that cannot be turned off
by a switch or pull chain.
Ÿ
Never clean appliance parts with
flammable fluids. These fumes can create
a fire hazard or explosion. And do not
store or use gasoline or other flammable
vapours and liquids in the vicinity of this or
any other appliance. The fumes can
create a fire hazard or explosion.
Ÿ
Do not connect or disconnect the electric
plug when your hands are wet.
Ÿ
Unplug the appliance or disconnect
power before cleaning or servicing. Failure
to do so can result in electrical shock or
death.
Ÿ
Do not attempt to repair or replace any
part of your appliance unless it is
specifically recommended in this material.
All other servicing should be referred to a
qualified technician.
Page 6
Use two or more people to move and
install appliance. Failure to do so can
result in back or other injury.
Ÿ
The appliance must be installed with all
electrical, water and drain connections in
accordance with state and local codes. A
standard electrical supply (240V AC only,
50 Hz), properly grounded in accordance
with the local codes and regulations.
Ÿ
Do not kink or pinch the power supply
cord of appliance.
Ÿ
The fuse (or circuit breaker) size should be
10 amperes.
Ÿ
It is important for the appliance to be
levelled in order to work properly. You may
need to make several adjustments to level
it.
Ÿ
Never allow children to operate, play with
or crawl inside the appliance.
Ÿ
Do not use solvent-based cleaning agents
of abrasives on the interior. These
cleaners may damage or discolour the
interior.
Ÿ
Do not use this apparatus for other than its
intended purpose.
Using Your Beverage Cabinet
Interior Light
Ÿ
You can turn the interior light ON or OFF
by touching the BULB button.
Door Lock
Ÿ
Your unit is provided with a lock and key
combination.
The keys are located inside the plastic bag
that contains the User's Guide. Insert the
key into the lock and turn it
counterclockwise to unlock the door. To
lock the door do the reverse operation
making sure metal pin is engaged
completely. Remove the key and place it in
a secure place for safekeeping.
Shelves
The Beverage Cabinet is equipped with one
glass shelf and two wire shelves. You can
move the shelves out and in smoothly.
Ÿ
To prevent damaging the door gasket,
make sure to have the door all the way
opened when pulling the shelves
outward.
Ÿ
For easy access to the storage content,
you can pull the shelves outward to gain
access to the items on the rear portion of
the shelf, however this unit was designed
with a plastic post on each sides of the
shelf track to prevent the shelves from
falling.
Ÿ
1 x Glass Shelf
2 x Wire Shelves
When removing the shelf out of the inner
rail, make sure to remove all items first.
Then move the shelf to the position where
the notch of shelf is exactly under the
plastic post and lift the shelf. In order to
replace the shelf, repeat steps described
above in reverse.
Page 11
Using Your Beverage Cabinet
Installation Safety Precautions
Electrical Connection
Extension Cord
Ÿ
This appliance should be properly
grounded for your safety. The power cord
of this appliance is equipped with a threeprong plug which mates with standard
three prong wall outlets to minimise the
possibility of electrical shock.
Ÿ
Ÿ
Do not under any circumstances cut or
remove the third ground prong from the
power cord supplied. For personal safety,
this appliance must be properly
grounded.
Ÿ
This appliance requires a standard 240
Volt AC ~/50Hz electrical ground outlet
with three-prong. Have the wall outlet and
circuit checked by a qualified electrician
to make sure the outlet is properly
grounded. When a standard 2-prong wall
outlet is encountered, it is your
responsibility and obligation to have it
replaced with a properly grounded 3prong wall outlet.
°F
°F/ °C
Ÿ
The temperature range of this Beverage
Cabinet is 2ºC to 10ºC.
Ÿ
It is recommended you install the
Beverage Cabinet in a place where the
ambient temperature is between 23º2 6 º C / 7 2 º - 7 8 º F. I f t h e a m b i e n t
temperature is above or below
recommended temperatures, the
performance of the unit may be affected.
For example, placing your unit in extreme
cold or hot conditions may cause interior
temperatures to fluctuate and the range of
2ºC to 10ºC may not be reached.
Ÿ
You can select temperature display
setting from Fahrenheit to Celsius degree
by touching the ºF/ºC mark. Fahrenheit or
Celsius degrees indicator will appear in
green color in the temperature display
window.
ON/OFF Power
Ÿ
To turn the appliance ON or OFF, press
and hold the POWER button for 2
seconds.
To Lock the Control Panel
Ÿ
Ÿ
Your Beverage Cabinet is equipped with
an automatic Control panel lock function.
This function will prevent any unwanted
changes to your temperature or power
settings.
The lock function will activate
automatically 12 seconds after the last
time a button is pushed on the control
panel.
Page 10
°C
Ÿ
To unlock the control panel lock press and
hold the UP and DOWN arrow buttons
for 3 seconds the control panel will beep
and blink once indicating that the control
panel is active and the settings can be
changed.
Setting the Temperature Control
Ÿ
You can set the temperature as you desire
by touching the UP or DOWN arrow
buttons. When you touch the two buttons
for the first time, the LED readout will show
the original temperature set at previous
time (the temperature preset at the factory
is 2ºC to 10ºC).
Ÿ
The temperature that you desire to set will
increase 1ºF or 1ºC if you touch the UP
button once, on the contrary the
temperature will decrease 1ºF or 1ºC if you
touch the DOWN button once.
Ÿ
The cord should be secured behind the
appliance and not left exposed or
dangling to prevent accidental injury.
The temperature inside the unit will
appear in blue in the display window.
Ÿ
The appliance should always be plugged
into its own individual electrical outlet
which has a voltage rating that matches
the rating label on the appliance. This
provides the best performance and also
prevent overloading house wiring circuits
that could cause a fire hazard from
overheated. Never unplug the appliance
by pulling the power cord. Always grip
the plug firmly and pull straight out from
the receptacle. Repair or replace
immediately all power cords that have
become frayed or otherwise damaged.
Do not use a cord that shows cracks or
abrasion damage along its length or at
either end. When moving the appliance,
be careful not to damage the power cord.
Ÿ
NOTE:
Ÿ
If the unit is unplugged, power lost, or
turned off, you must wait 3 to 5 minutes
before restarting the unit. If you attempt to
restart before this time delay, the
Beverage Cabinet will not start.
Ÿ
When you use the Beverage Cabinet for
the first time or restart the Beverage
Cabinet after having been shut off for a
long time, there could be a few degrees
variance between the temperature you
select and the one indicated on the LED
readout. This is normal and it is due to the
length of the activation time. Once the
Beverage Cabinet is running for a few
hours everything will be back to normal.
Because of potential safety hazards under
certain conditions, it is strongly
recommended that you do not use an
extension cord with this appliance.
However, if you must use an extension
cord it must be checked and tested by a
qualified technician or service person.
The extension cord must be a VDE-Listed,
3-wire grounding extension cord that has
a grounding plug and outlet and that the
electrical rating of the cord is 220-240
Volts and at least 10 amperes.
Page 7
Installation
WARNING
Installation
Ÿ
To reduce the risk of fire, electrical
shock, or injury when using your
appliance, follow these basic
precautions:
Ÿ
Ÿ
Ÿ
Read all instructions before using the
Beverage Cabinet.
Ÿ
DANGER or WARNING: Risk of child
entrapment.
Child entrapment and suffocation are not
problems of the past. Junked or
abandoned appliances are still dangerous
. . . even if they will “just sit in the garage a
few days”.
Ÿ
Before you throw away your old
Beverage Cabinet: Take off the door.
Leave the shelves in place so that children
may not easily climb inside
Ÿ
Never allow children to operate, play with,
or crawl inside the appliance.
Ÿ
Never clean appliance parts with
flammable fluids. The fumes can create a
fire hazard or explosion.
Ÿ
Do not store or use gasoline or any other
flammable vapors and liquids in the
vicinity of this or any other appliance. The
fumes can create a fire hazard or
explosion.
Before using your Beverage Cabinet
Ÿ
Ÿ
Remove the exterior and interior packing.
Check to be sure you have all of the
following parts:
- 1 x Glass Shelf
- 2 x Wire Shelves
- 2 x Keys
- 1 x Stainless Steel Handle Assembly
with Hardware
- 2 x Decorative Screws.
- 1 x Instruction Manual.
Page 8
Before connecting the Beverage Cabinet
to the power source, let it stand upright for
approximately 2 hours. This will reduce
the possibility of a malfunction in the
cooling system from handling during
transportation.
Clearances
Ÿ
10mm
10mm
(from sides)
Clean the interior surface with lukewarm
water using a soft cloth.
Ÿ
Pull away the door gasket (A) in the area
where the handle is to be installed on the
left side as in Illustration #1. The gasket is
easily displaced by hand, no tools are
necessary.
Ÿ
Align the handle (B) with the screws
installed. Tighten the screws (C) using a
Phillips head screwdriver until the handle
sets both flush and secured tightly
against the door frame. (DO NOT over
tighten as this will cause damage to the
handle assembly).
Ÿ
Replace the door gasket (A) to its original
position.
Ÿ
If you choose not to use the handle
supplied, simply follow step 1 to access
the installation screws and remove them
and then place the two decorative plugs
into the two holes separately. Continue on
to step 3 to replace the door gasket to its
original position.
Clearances required for the Beverage
Cabinet to adjacent surfaces are 10mm
from top and sides, and 50mm from rear.
(from top)
°F
°F/ °C
°C
Install the handle on the left side of the
door.
Installation of your Beverage Cabinet
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
This appliance is designed to be for free
standing installation or built-in (fully
recessed).
Place your Beverage Cabinet on a floor
that is strong enough to support it when it
is fully loaded. To level your Beverage
Cabinet, adjust the front levelling legs at
the bottom of the Beverage Cabinet.
Locate the Beverage Cabinet away from
direct sunlight and sources of heat (stove,
heater, radiator, etc.). Direct sunlight may
affect the acrylic coating and heat sources
may increase electrical consumption.
Extreme cold ambient temperatures may
also cause the unit not to perform
properly.
Avoid locating the unit in moist areas.
Plug the Beverage Cabinet into an
exclusive, properly installed-grounded
wall outlet. Do not under any
circumstances cut or remove the third
(ground) prong from the power cord. Any
questions concerning power and/or
grounding should be directed toward a
certified electrician or an authorised
service center.
50mm
(from rear)
Reversing the Door Swing of Your
Appliance
Ÿ
This appliance has the capability of the
door opening from either the left or right
side. The unit is delivered to you with the
door opening from the left side. Should
you desire to reverse the opening
direction, please call service for reversal
instructions.
1
A
Installing stainless steel handle
This Beverage Cabinet includes a stainless
steel handle that is not required to operate
this unit.
To install the handle please follow the below
instructions:
2
C
B
For your convenience the screws used in the
installation of the handle have been put in
place at the factory.
Page 9