Magnavox 20MF200V-17E Owner`s manual

OWNER'S MANUAL
S M A R T .
LCD TV Monitor
V E R Y
S M A R T .
20MF200V
N EED H ELP ? C ALL U S !
P!
O
ST
MAGNAVOX
REPRESENTATIVES ARE READY TO HELP YOU WITH
WE CAN GUIDE
CONNECTS, FIRST-TIME SETUP, AND ANY OF
WE WANT YOU TO START ENJOYING YOUR NEW
ANY QUESTIONS ABOUT YOUR NEW PRODUCT.
YOU THROUGH
THE
FEATURES.
PRODUCT RIGHT AWAY.
CALL
US BEFORE YOU CONSIDER RETURNING THE PRODUCT.
1-800-705-200
OR
VISIT US ON THE WEB AT WWW.MAGNAVOX.COM
I mportant!
R eturn your W arranty R egistration C ard within 10 days.
S ee W hy I nside.
Table of Contents
Important Safety Instructions
3
FCC Statement
5
Precautions and Reminders
6
Wall Mount
8
Specifications
9
Front and Rear Panel
10
Quick Connecting Guide
12
PC Connection
14
Remote Control Function
15
OSD Menu Descriptions
16
OSD Function (PC picture controls)
23
Troubleshooting
25
Warranty Information
26
-2-
Important Safety Instructions
The lightning flash with arrowhead symbol.
Within an equilateral triangle. is intended
to alert the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of a sufficient
magnitude to constitute a risk of electric
shock to persons.
Caution
Risk of electronic shock
Do not open
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
The exclamation point within an
equilateral triangle. is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the appliance.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Caution
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings and follow all instructions.
4.
5.
6.
7.
8.
9.
10.
11.
¡
C
¡
Please use this product within operating temperature 5 C ~ 40 C,
relative humidity 20 ~ 80%.
Clean only with a damp cloth.
Do not block any of the ventilation openings. Install in accordance with
the manufacturers instructions.
Do not install near any heat source such as radiators, heat registers,
stoves or other apparatus that produce heat.
Do not defeat the safety purpose of the polarized or grounding type plug.
A polarized plug has type blades with one wider than the other.
A grounding - type plug has two blades and a third grounding prong.
The wide blade or third prong are provide for your safety.
When the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
Only use attachment/accessories specified by the manufacturer.
Use only with a cart, stand, tripod, bracket or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving
the cart/apparatus combination to avoid injury
from tip-over.
-3-
C
Important Safety Instructions
12. Unplug this apparatus during lightning storms or when unused for long
periods of time.
13. Refer all servicing to qualified service personal.
Servicing is required when the apparatus has been damaged in any
way, such as power supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate normally, or
have been dropped.
14. Apparatus shall not be exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall be placed on the
apparatus.
15. Unplug the unit and inform the service center in case of abnormalities seen with
regards to the operation of the unit.
16. Use soft dry cloth for cleaning the cabinet/screen of the television.
DON'T USE ALCOHOL/ACETONE in cleaning the unit.
17. Always use the POWER BUTTONS on the unit or remote control when turning
off in order to prolong lamp life.
18. Contact service center if the picture displayed by the unit is getting dimmer.
19. Don't place the unit on an uneven surface. Make sure it has a 15cm space from
the wall.
20. Keep unit away from direct sunlight.
21. Don't step or put heavy materials on top of the unit.
22. Make sure to unplug the unit when there are no people left in the house for a
long period of time (days).
23. Do not install this equipment in a confined space such as a book case or
similar unit
This product satisfies FCC regulations when shielded cables and connectors
are used to connect the unit to other equipment.
Prevent electromagnetic interference with electric appliances such as radios
and televisions, use shielded cables and connectors for connections.
Warning
FCC Regulations state that any unauthorized changes or modifications to
this equipment not expressly approved by the manufacturer could void the
user's authority to operate this equipment.
-4-
FCC Statement
FCC notice
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1.Reorient or relocate the receiving antenna.
2.Increase the separation between the equipment and receiver.
3.Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
4.Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the
user's authority to operated the equipment under FCC rules. This device
complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1.This device may not cause harmful interference, and
2.This device must accept any interference received, including interference
that may cause undesired operation.
-5-
Precautions And Reminders
Don't place the TV in a box when
using it.
Place unit on even surfaces.
10cm
Is
Don't throw any object inside
the TV box like metals or other
flammable materials.
-6-
Precautions And Reminders
Remember to unplug the AC cord from
the AC outlet before cleaning the display
unit. Do not use liquid cleaners or
aerosol cleaners to clean the display.
Avoid direct sunlight contact to TV.
Avoid dusty, high humidity and smoky
areas.
Make sure to unplug the unit when there
are no people left in the house for a long
period of time (days).
Call service personnel in cleaning the
internal part of the TV box once a year.
Do not cover or block these vents and
openings, because inadequate
ventilation may shorten the life of the
display unit and cause overheating.
Do not place the display near water.
Like bathtub, washbasin, kitchen sink
laundry tub, swimming pool or in a damp
basement.
Notice for Remote Controller
Avoid Dropping
Rec
all
Ente
0
Rec
p.
Com
all
Ente
0
Rec
Clea
Back
light MTS
0
r Vide
o
Com
p.
E
MUT
MENU
Clea
r
Retu
TV
Ente
MENU
MENU
rn
all
R
PC
9
8
7
p.
Com
POWE
6
5
4
o
E
MUT
E
MUT
Retu
r Vide
3
2
1
TV
9
8
7
o
Avoid Aerosol Cleaners
R
PC
6
5
4
TV
r Vide
POWE
3
2
PC
9
8
7
R
1
6
5
4
POWE
3
2
1
Avoid Soaking
r
rn
Clea
Retu
Back
light MTS
-7-
rn
Back
light MTS
r
Wall Mount
The wall mount set (Optional)
Contact a professional installer if you are unsure about wall mount installation, as
unskilled installation may cause injury and may damage to the display unit.
Caution: In order not to damage the display unit during dissembling the unit stand,
place the display panel on a soft fabric (i.e., a blanket) and face down.
Use standard VESA mounting for wall mount.
Please mount this product solidly on the wall or pole.
1.Take off Cable Cover.
2. Loosen screws on back cover, and take off..
3. Loosen screws on stand, and dismantle it.
4. Install wall mount.
-8-
Specifications
LCD Panel
Screen Size
20.1 Inch, 50cm
Display Type
TFT LCD (Active Matrix)
Resolution
800x600xRGB
Colors
16.7 Million colors
View Angle
Horizontal 160 , Vertical 120 , CR 10
Dot Pitch
0.51 mm
Brightness
500 cd/m2
Contrast Ratio
500:1
Aspect Ratio
4:3
Response Time
16 ms (gray to gray)
Lamp Life
6 CCFL backlight Lamps w/50,000hrs
VGA
VGA Resolution
Support 640 480, 800 600
VGA Input
analog, 15-pin mini D-SUB female connector
Vertical Frequency
56 Hz~75 Hz
Horizontal Frequency
30 kHz~48 kHz
TV
TV Channels
Air and cable TV
Video Audio
Video Input Format
Video Input
NTSC / PAL (auto detected), SECAM
Video 1 : Composite Video / S-Video 1, S-Video priority
Video 2 : Composite Video
Video 3 : Component in (YCbCr 480i, 576i)
Audio Input
R / L 4 (CVBS, S-Video) 1, Video 2 1, Component 1, Pc 1
Audio Output
Speaker R / L 1 (3W 2). Volume, bass, Treble adjustable
Mute Control. Sound effect included
Headphone
Build-in, Stereo
Others
Accessories
Remote Control 1, AC power cord 1, Manual 1,
AV cable, Wall mount
OSD
English / Spanish / French
Safety / EMI
UL / FCC Part 15 Class B
Power Source
100-240V AC, 50 / 60 Hz, DC 12V, 5A
Power Consumption
60 W (Max) / 1.5W (Stand By)
-9-
Front And Rear Panel
Front panel
1
2
Function panel
7
1
6
5 4
3
Power Indicator:
Stand by mode displays red. Power on displays green.
2
IR Receiver:
Aim the IR receiver window when using Remote Controller.
3
Power key:
4
TV / Video key:
Press once to turn on. Press again to return stand by mode.
Select signal source, following by
TV
AV 1 / S-VIDEO AV 2
COMPONENT
5
Menu key:
6
Volume Control / Setting keys:
7
Channels / Cursor Up/Down key
PC mode circle.
Press to display the Menu. Also press to exit the Menu.
Press "
" to decrease volume, and press "
" to increase volume. When OSD
menu displays, these two keys enable to set each selection of menu.
Press "
" to select channels from high to low, and press "
" to select channels
from low to high. When OSD menu displays, these two keys enable to select
each setting.
-10-
Front And Rear Panel
Rear Panel
S-VIDEO
AV 1
AV 2
Video
Video
L
L
Audio
AV1/S
VGA
Audio
R
R
Headphone
Y
L
Cb
Audio
Cr
R
Audio in
DC in
Antenna
ANT Input Socket 75
F type coaxial cable connector.
Y Cb Cr Input Socket Connecting with other component output included appliance.
AV 1 Socket Connecting with DVD player or VCR AV output.
S-VIDEO Input Socket Connecting with other S-VIDEO output included appliance.
AV 2 Input Socket Connecting with DVD player or VCR AV output.
VGA Input Socket Connecting with VGA input socket of PC to display monitor.
Headphone Socket
PC Audio Input Socket Connecting with Line Out socket of PC.
-11-
Quick Connecting Guide
¡´
This
product includes AV, S-VIDEO, COMPONENT input sockets to
connect with DVD player, VCR, DV Cam to obtain better picture quality.
¡´
When both Av1 and S-Video input are connected (Internal Auto-detect),
S-VIDEO is priority to be applied.
¡´
All input sockets need to select proper sources to work.
¡´
Video and Audio is specified with standard colors.
¡Please
´
follow the colors to connect:
Video.......Yellow (Y)
Audio (L)..White (W)
Audio (R)..Red (R)
Y...............Green
Cb...........Blue
Cr............Red
Connection Instruction
1. Connect preferred home entertainment appliances with AV1 / S-VIDEO / AV2 / COMPONENT
/ PC input sockets.
2. Press Source key to select following: AV1/ S-VIDEO
AV2
COMPONENT
TV / C ATV
PC
Connecting DVD Player / VCR
S-VIDEO
DVD / SVCD / VCD / CD / MP3 PLAYER
ON
OFF
OPEN/CLOSE
REW
FWD
TAXT
Y
Y
W
W
AV 1
AV 2
Video
Video
L
L
DIGITAL OUT
PLAY
MIC2
+
STOP PAUSE
Audio
AV1/S
SOUND
+
R
R
Audio
R
R
(OUT to TV)
NOTICE
Please refer to DVD player or
VCR maunal for connections
or instructions.
Y
L
Cb
Audio
Cr
R
Antenna
-12-
Quick Connecting Guide
Using COMPONENT Input for DVD Player and Av2 for VCR
DVD / SVCD / VCD / CD / MP3 PLAYER
ON
OFF
OPEN/CLOSE
REW
FWD
Input sockets are Av2
& Component
TAXT
DIGITAL OUT
PLAY
MIC2
+
STOP PAUSE
SOUND
+
OPEN/CLOSE
REW
FWD
TAXT
ON
OFF
PLAY
This product only
supports Y Cb Cr. It
does not support
Progressive
Scan ( 480P).
STOP PAUSE
SOUND
S-VIDEO
R L R B G
Y
AV 1
AV 2
Video
Video
W
R
Y
L
L
Audio
AV1/S
W
Audio
R
R
R
G
Y
L
Cb
Audio
Cr
R
B
L
R
R
Antenna
Using S-VIDEO for DVD Player / VCR
DVD / SVCD / VCD / CD / MP3 PLAYER
ON
OFF
OPEN/CLOSE
REW
FWD
TAXT
DIGITAL OUT
PLAY
MIC2
+
STOP PAUSE
SOUND
+
S-VIDEO
R L
S
S
L
AV 1
AV 2
Video
Video
L
L
Audio
AV1/S
R
When S-VIDEO and Av1input
are used at the same time,
S-VIDEO is priority.
R
R
Y
L
Cb
Audio
Cr
R
Antenna
-13-
Audio
If user has a progressive
scan DVD player with 480p
output, please switch the
DVD player into interlaced
mode.
PC Connection
Connecting PC Instructions
1. Video Signal Connection:
Connect VGA signal cable to VGA input socket and VGA output of the graphic
card on the computer.
2. Audio Signal Connection:
Connect audio signal cable to AUDIO IN socket and LINE OUT plug on the computer.
VGA PORT
VGA
Headphone
PC AUDIO IN
Audio in
DC in
Operating Instructions
MODE
1. Turn on the power of this product.
2. Press Source key to select PC mode.
3. Turn on computer, and screen will display.
When user switches to a resolution
not listed , screen at right will display
OUT OF RANGE.
Please wait for while, as computer
will return back to previous resolution.
When PC/VGA signal loses, power
indicator will display red and green
colors flash in waiting condition.
User can switch to other source or
return to computer to support VGA
signal again.
-14-
Resolution
Refresh Rate
Remote Control Functions
Power key
Numerical keys
Press to turn ON or OFF.
For direct access to programs.
For a 2- digit program number.
the 2nd digit must be entered
within 2 seconds.
Channel keys
Selecting TV program.
To move up or down a
program
A/CH Key
To access the last
program viewed.
CC
Closed caption.
To disable or enable
caption function
Muting key
To disable sound.
To restore sound,
press button again.
Volume keys
Cursor key
To adjust the sound level.
To move the cursor
up/down/right/left to
scroll through a list of
options.
Menu key
To turn on or off the OSD
(On - Screen Display).
Cursor left/right
To adjust the settings
of the highlighted
function in OSD
To return to last item in
OSD and clear menu from
screen.
Sleep key
Cursor down
To select the next item
on the menu. And
return to last item with
cursor up.
To select the period of time
after which the set will switch
automatically to standby
mode (up to 120 minutes).
Status key
To show OSD status.
I-II key
AV key
Sound mode
To choose MONO, Stereo
and SAP (2 nd audio program)
sound system.
To select TV/Video/PC
source.
-15-
OSD Menu Descriptions
Menu Instruction:
Press Menu key on front or remote controller
On the OSD menu, the INSTALLATION, PICTURE, AUDIO and SETUP sections can be
adjusted
Active sections display Yellow. Adjustable sections display Green.
Inactive sections display Gray. Selected section displays Red.
1. Press Cursor Up/Down key to select section.
2. Press Cursor Left/Right keys to adjust sections.
3. Follow the info on screen to adjust.
Once setting is finish, please press Menu
key to exit, and follow above instruction to adjust other settings.
OSD will disappear automatically if
no key is pressed.
MENU
INSTALLATION
PICTURE
AUDIO
SETUP
PRESS
/
SELECT
PRESS
/
SETTING
PRESS MENU TO EXIT
INSTALLATION
TV Setting, adjustable settings as right figure:
INSTALLATION
CH ADD/SKIP
AUTO PROGRAM
CH MODE
OFF
CATV
PRESS
/
SELECT
PRESS
/
SETTING
PRESS MENU BACK
-16-
OSD Menu Descriptions
CHANNELS ADD / SKIP
After running AUTO PROGRAM, use following steps to add or
delete channels.
1. ADD: Press number or Cursor Up/Down key to
select channel, and press Cursor
CH ADD/SKIP
Left/Right key to add.
CATV
2. SKIP: Press number or Cursor Up/Down key to
8
SKIP
select channel, and press Cursor
Left/Right key to erase.
PRESS
/
SELECT CH
PRESS
/
ADD/SKIP
PRESS MENU BACK
AUTO PROGRAM
This product memorizes channels automatically
after running AUTO PROGRAM. Once memorized,
use remote controller or front keys to select
channels.
To turn on AUTO PROGRAM function, press
Cursor Left/Right key to operate.
CHANNEL SCANNING...
CATV 10
PRESS MENU STOP AND BACK
CHANNEL MODE
To select CATV or AIR mode, press Cursor
Left/Right key to change.
INSTALLATION
CH ADD/SKIP
AUTO PROGRAM
CH MODE
OFF
CATV
PRESS
/
SELECT
PRESS
/
SETTING
PRESS MENU BACK
-17-
OSD Menu Descriptions
PICTURE SETTING
Please refer to below figure, and adjust with preferred settings.
PICTURE
BRIGHTNESS
18
CONTRAST
15
COLOR
16
TINT
16
SHARPNESS
28
BRIGHTNESS : Brighter or darken the picture.
CONTRAST : Deepen or soften the picture.
COLOR : Adjust picture color intensity.
TINT : Adjust picture color tint.
COLOR TEMP NORMAL
PRESET
PRESS
/
SELECT
PRESS
/
SETTING
PRESS MENU BACK
SHARPNESS : Sharpen or soften the picture.
COLOR TEMP : Adjust picture color following by :
NORMAL / COOL / WARM
PRESET : Back to default setting.
AUDIO SETTING
Please refer to below figure, and adjust with preferred settings.
EFFECT: NORMAL / SURROUND two mode.
TREBLE and BASS are adjustable on NORMAL
mode only.
AUDIO
EFFECT
BALANCE
TREBLE
BASS
SOUND
PRESET
NORMAL
0
0
BALANCE: Default 0 is centralized and balanced.
When number is increased, right
speaker performs stronger.
When number is decreased, left
speaker performs stronger.
0
MONO
PRESS
/
SELECT
PRESS
/
SETTING
PRESS MENU BACK
TREBLE: When number is increased, treble
performs stronger.
When number is decreased, treble
performs weaker.
BASS: When number is increased, bass performs stronger.
When number is decreased, bass performs weaker.
SOUND: To select sound mode, press Cursor Left/Right keys
to change.
I-II key on remote controller is the same function.
STEREO / SAP / MONO
Bilingual mode is only activated when program contains stereo and
SAP (Second Audio Program).
When MONO is selected, any sound source would be MONO even it is stereo broadcasting.
-18-
OSD Menu Descriptions
SETUP
Please refer to below figure, and adjust with preferred settings.
BACKLIGHT: Adjust backlight brightness following by:
SETUP
BACKLIGHT
CAPTION
NORMAL / BRIGHTEN / DARKEN
NORMAL
OFF
V-CHIP
LANGUAGE
LANGUAGE: English / Spanish / French selectable.
ENGLISH
PRESS
/
SELECT
PRESS
/
SETTING
PRESS MENU BACK
CLOSED CAPTION
Allow user to select from three closed modes as below:
Off: Turn off Caption Vision.
CC1/ CC2 : Displays a printed version of the dialog or sound effects of a program.
CC1 should be set for most programs.
CC MUTE: Mute the sound but still display caption. The CC MUTE option can be
used to set the TV to turn the CLOSE CAPTION mode ON whenever the
MUTE button is pressed.
To activate closed caption function, you can
1. Press CC Key on remote controller.
2. Press Cursor Up/Down key to select the Caption option of TV setting. The closed
caption selection as following:
OFF / CC1 / CC2 / CC-MUTE
Not all broadcasting programs support Closed Caption.
-19-
OSD Menu Descriptions
V-CHIP
Understanding V-Chip
The V-Chip feature receives and processes the data that contains program content advice
sent by the broadcasters or other program providers. When programmed by the viewer, a TV
with V-Chip can respond to the content advice and block any program content that may be
considered unsuitable (such as offensive language, violence, sexual situations, etc.). This is
a great feature for censoring the type of programs children watch.
In the V-Chip section you'll learn how to block channels and programs that are not rated, are
unrated, or have no rating. You will also find out how to turn these blocking features ON or OFF.
Below brief explanations are given of some terms and ratings relate to the V-Chip feature.
You can block individual channels or block programs on the basis of the ratings of the MPAA
and TV broadcasters.
Movie Ratings (Motion Picture Association of America)
G: General Audience
All ages admitted. Most parents would find these programs suitable for all ages.
This type of program contains little or no violence, no strong language and little or no sexual
dialogue or sexual situations.
PG: Parental Guidance Suggested
These types of programs contain material that parents may find unsuitable for younger
children. It may contain one or more of the following: moderate violence, some sexual
situations, infrequent coarse language, or some suggestive dialog.
PG13: Parents Strongly Cautioned
These types of programs contain material that parents may find unsuitable for children under
the age of 13. It contains one or more of the following: violence, sexual situations, coarse
language, or suggestive dialog.
R: Restricted
This type of program has been designed specifically for adults. Anyone under the age of
consent should view these programs only with an accompanying parent or adult guardian.
They will contain one or more of the following: intense violence, explicit sexual situations,
strong or coarse language, or intensely suggestive dialogue.
Nc17
No one under the age 17 will be admitted. These types of programs should be viewed by
adults only. They will contain graphic violence, explicit sex, or crude, indecent language.
X: Adults Only
These types of programs contain one or more of the following: very graphic violence, very
graphic and explicit or indecent sexual activity, very coarse and intensely suggestive
language. This is used to rate TV programming.
There are two parts in this rating system: an age-base ratings that indicates the age group for
particular designed program, and a content-base ratings to details if the program contains
higher levels of sex, violence or adult language.
-20-
OSD Menu Descriptions
V-CHIP SETTING
The options in V-CHIP setting include:
MOVIE RATING
TV RATING
PASSWORD
V-CHIP
V-CHIP SETTING
MOVIE RATING
Select to V-CHIP and press Cursor Left/Right key to
enable V-CHIP function.
TV RATING
PASSWORD
V-CHIP
For the first time to use V-CHIP-setting, entering
default password [1111] is required.
PRESS
/
SELECT
PRESS
/
SETTING
PRESS MENU BACK
MOVIE RATING SETTING
MOVIE RATING
G
PG
PG-13
R
NC-17
X
BLOCK
BLOCK
BLOCK
BLOCK
BLOCK
BLOCK
PRESS
/
SELECT
PRESS
/
SETTING
PRESS MENU BACK
Press Cursor Up/Down key and Cursor Left/Right keys
to block or unblock each rating.
When the rating is blocked, higher ratings for
older ages will be blocked automatically.
Ex. When R is blocked, NC-17 and X ratings will
also be blocked automatically.
-21-
OSD Menu Descriptions
TV RATING SETTING
To adjust TV ratings, press Cursor Up/Down and
Left/Right key to select and adjust.
TV RATING
______
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
______
PRESS
/
SELECT
PRESS
/
SETTING
PRESS MENU BACK
V - CHIP SETTING
V-CHIP : When DISABLE, UNRATED and
NO RATING is not activated.
V - CHIP
V-CHIP
NO RATING
UNRATED
DISABLE
DISABLE
DISABLE
NO RATING : When ENABLE, the program will be
blocked automatically if no V - CHIP
data receipt.
PRESS
/
SELECT
PRESS
/
SETTING
PRESS MENU BACK
UNRATED : When ENABLE, the program will be
blocked automatically if program is
unrated.
PASSWORD SETTING
Press Cursor Left/Right keys to enable or disable
Password function.
PASSWORD
PASSWORD
CHANGE
To change password, please select CHANGE and
input new password as the left bottom
figure.
DISABLE
PRESS
/
SELECT
PRESS
/
SETTING
PRESS MENU BACK
INPUT NEW PASSWORD [
PRESS MENU TO EXIT
]
If password function is disabled, there is no
need to input password when using V-Chip
function.
If password is forgotten, please do the
following steps:
1. Enter code [2567], INCORRECT PASSWORD
blinking on the screen.
2. Enter code [2567] again, V-Chip Setting menu
will appear on the screen.
-22-
OSD Function (PC Picture Controls)
1. Press front Menu key to display OSD menu.
2. Press Cursor Up/Down key to select Screen Adjust, Picture Adjust, Audio
Adjust and OSD Adjust.
3. Press Cursor Left/Right keys to adjust sub-items.
Active sections display Yellow. Adjustable sections display Green.
Inactive sections display Gray. Selected section displays Red.
Screen Adjust
Adjust the best position and
display on the screen automatically.
SCREEN ADJ.
NO
AUTO ADJ.
15
CLOCK
31
PHASE
17
H-POS
17
V-POS
NO
PRESET
800X600 H37KHZ
V60HZ
PRESS
/
SELECT
PRESS
/
SETTING
PRESS MENU TO EXIT
Adjust pixel clock.
Adjust phase.
Adjust horizontal display position.
Adjust vertical display position.
Recall Default Settings.
Picture Adjust
Adjust backlight brightness following by:
NORMAL / BRIGHTEN / DARKEN
PICTURE ADJ.
BACKLIGHT
CONTRAST
BRIGHTNES
COLOR TMP
RED
GREEN
BLUE
NORMAL
10
10
NORMAL
PRESS
/
SELECT
PRESS
/
SETTING
PRESS MENU TO EXIT
Adjust contrast ratio
Adjust brightness
Adjust color temperature following by:
NORMAL / COOL / USER / WARM
Longer bar displays picture more reddish, and
shorter is less reddish.
Longer bar displays picture more greenish, and
shorter is less greenish.
Longer bar displays picture more bluish, and
shorter is less bluish.
These three settings are only activated when
COLOR TEMP selects USER setting.
-23-
OSD Function (PC Picture Controls)
Audio Adjust
AUDIO ADJ.
MUTE
VOLUME
EFFECT
BALANCE
TREBLE
BASS
PRESET
NO
18
NORMAL
0
0
0
NO
800 X 600 H37KHZ
V60HZ
PRESS
/
SELECT
PRESS
/
SETTING
PRESS MENU TO EXIT
Turn ON to mute the sound.
Adjust volume. Longer bar represents louder
sound.
NORMAL / SURROUND two mode when AX Box
is connected. (TREBLE and BASS are adjustable on
NORMAL mode only.)
Default 0 is centralized and balanced.
When number is increased, right speaker
performs stronger.
When number is decreased, left speaker
performs stronger.
When number is increased, treble performs
stronger.
When number is decreased, treble performs
weaker.
When number is increased , bass performs stronger.
When number is decreased, bass performs weaker.
Recall Default Settings.
Note: Effect, Balance, Treble, Bass and Preset settings will be activated when AV Box is combined.
OSD Adjust
The same function as press Menu key to exit.
OSD ADJ.
EXIT OSD
H-POS
V-POS
DURATION
LANGUAGE
Adjust screen horizontal position.
16
16
10
ENGLISH
PRESS
/
SELECT
PRESS
/
SETTING
PRESS MENU TO EXIT
Adjust screen vertical position.
Adjust the time of OSD Menu display on the
screen.
Per second as unit, Maximum is 30 seconds,
and minimum is 3 seconds.
LANGUAGE: English / Spanish / French
selectable.
-24-
Troubleshooting
Troubleshooting
Symptoms
Checks
Check power cord
No Picture and Sound
Check if in stand-by mode
Check the connections and source
Noise from Cabinet
Due to outer temperature change. Please note this does
not affect the performance of this product.
Interference
Electrical appliances, Cars / Motorcycles or Fluorescent
lights interference
Poor or Distorted Picture
Check antenna connection
Playing Stereo but
receiving Mono
Check OSD if Audio is selected Mono
No Color
Adjust Picture Setting
Try to adjust volume
Headphone jack is using
No Sound
Video and Audio plugs connect different sources
Mute function is activated
Snowy Picture
Adjust antenna location or connection
Multiple Picture
Adjust antenna location or connection
No power
Check Power Cord
Remote Controller not
working
Check batteries
No picture when playing
DVD
If DVD player supports progressive scan, switch the
DVD player into interlaced mode.
Aim remote controller to IR receiver
-25-
MAGNAVOX LIMITED WARRANTY
Ninety (90) Days Free Product Exchange
MAGNAVOX warrants this product against defect in material
or workmanship, subject to any conditions set forth as follows:
PROOF OF PURCHASE:
You must have proof of the date of purchase to exchange the
product. A sales receipt or other document showing the product
and the date that you purchased the product as well as the
authorized retailer included, is considered such proof.
COVERAGE:
Warranty coverage begins the day you buy the product. For a
period of ninety (90) days from the date of purchase, if the
product is determined to be defective, Magnavox will exchange
the defective product with a new or renewed product, at its
option, at no charge. The replacement product is covered only
for the warranty period of the original product. When the warranty
on the original product expires, the warranty on all
replaced products also expires. When it is necessary for you to
ship the product to Magnavox for exchange, you will pay the
shipping cost for shipment to Magnavox. Magnavox will pay the
shipping costs when returning a product to you.
Note: The exchange model supplied will be the most comparable
one in Magnavox current inventory. Shipping of your product
to Magnavox implies intent to follow the specified requirements
of the warranty and exchange program. Product received
by Magnavox cannot be returned. Replacement product can
only be sent if all warranty requirements are met. Failure to follow
all requirements can result in delay of exchange process.
EXCLUDED FROM WARRANTY COVERAGE
Your warranty does not cover:
Shipping charges to return defective product.
Labor charges for installation or setup of the product,
adjustment of customer controls on the product, and
installation or repair of antenna systems outside of the product.
Product repair and/or part replacement because of improper
installation, connections to improper voltage supply, abuse,
neglect, misuse, accident, unauthorized repair or other cause
not within the control of Magnavox.
A product that requires modification or adaptation to enable
it to operate in any country other than the country for which it
was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
Damage occurring to product during shipping when improperly
packaged or cost associated with packaging.
Product lost in shipment and no signature verification of receipt
can be provided.
A product used for commercial or institutional purposes
(including but not limited to rental purposes).
Product sold AS IS or RENEWED.
WHERE WARRANTY EXCHANGE IS AVAILABLE:
Exchange is available in all countries where Magnavox officially
distributes the product. In countries where Magnavox does not
distribute the product, the local Magnavox organization will
attempt to exchange the product, although there may be a
delay if the appropriate product is not readily available or special
customs processes are implied.
FOR EXCHANGE IN THE U.S.A., PUERTO RICO, OR U.S.
VIRGIN ISLANDS ...
Contact Magnavox Customer Care Center at:
1-800-705-2000
FOR EXCHANGE IN CANADA ...
1-800-661-6162 (French Speaking)
1-800-705-2000 (English or Spanish Speaking)
REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE
CONSUMER. MAGNAVOX SHALL NOT BE
LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES FOR BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT
TO THE EXTENT PROHIBITED BY APPLICABLE LAW,
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS
PRODUCT IS LIMITED IN DURATION TO THE
DURATION OF THIS WARRANTY.
Some states do not allow the exclusions or limitation of incidental
or consequential damages, or allow limitations on how
long an implied warranty lasts, so the above limitations or
exclusions may not apply to you. In addition, if you enter into a
service contract agreement with the MAGNAVOX partnership
within ninety (90) days of the date of sale, the limitation on
how long an implied warranty lasts does not apply.
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Magnavox, P.O. Box 520890, Miami, FL 33152 (402) 536-4171
EL6578E001 / 01-04
-26-
GARANTIE LIMITEE MAGNAVOX
-27-
GARANTIE LIMITEE MAGNAVOX
-28-