Audiovox HRDV700 Specifications

HRDV700 Two 7" Monitors with
Built-in DVD player and Two Audio/Video
Input Capability Mounted in Vehicle
Specific Headrests
P OW E R
P OW E R
SCREEN
M O DE
SCREEN
M O DE
P LA Y
S TO P
S OU R C E
S OU R C E
AUX
AUX
Operation Manual
IMPORTANT
An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is
used for vehicle information, system control, rear or side observation
or navigation. If the LCD panel or video monitor is used for television
reception, video or DVD play, the LCD panel or video monitor must
be installed so that these features will only function when the vehicle
is in ‘park’ or when the vehicle’s parking brake is applied.
An LCD panel or video monitor used for television reception, video
or DVD play that operates when the vehicle is in gear or when the
parking brake is not applied, must be installed to the rear of the driver’s
seat where it will not be visible, directly or indirectly, to the operator of
the motor vehicle.
Patent Pending
-2-
HRDV700 system
The HRDV700 system is composed of two headrest units. The master unit has a
built-in DVD player and the satellite unit has a monitor that is used to either watch
the DVD movie that is playing in the master unit or play a video game plugged into
the AV1 input or AUX input. Each unit has a remote control. The remote control for
the master unit is a full-function remote control while the remote control for the
satellite unit has limited functions.
Caution: Each monitor has an AUX input on the bottom right hand side of the
screen. When the AUX connector is plugged in to this input use care when
pivoting the screen downwards. The plug will limit screen travel. Excessive
force can screen and/or plug.
Quick Start Guide
1. On master monitor, tilt the screen forward using the center tab at the top of
the screen.
2. Insert a DVD, CD or MP3 disc into the slot, label facing you.
3. The disc will start playing.
4. Tilt the monitor to a comfortable viewing position (the headrest itself can be
tilted forward to help achieve a comfortable viewing position).
5. Each wireless headphone has a CH A/CH B switch. When sitting in front of the
master screen, use the CH A switch setting. When sitting in front of the
satellite screen, use the CH B switch setting. Set the headphone to the proper
channel and press the Power On/Off switch. The power indicator will light up
red. Turn the volume down to its lowest setting before putting them on your
head.
6. When the DVD menu appears, select the menu item using the cursor keys
and press the Enter or Play button.
7. If audio playback through the vehicle radio is preferred, use the FM transmitter
On/Off button on the master remote control. Use the FMM Source button to
select DVD Audio. Set the vehicle radio to the channel selected on the master
monitor. If interference with a local radio station occurs, set the FM modulator
to one of the other two radio frequencies using the FM transmitter select
button on the master remote control.
8. Turn on the satellite screen using the power button on the front of the screen
or the satellite remote control.
9. Tilt the screen to a comfortable viewing position (the headrest itself can be
tilted forward to help achieve a comfortable viewing position).
NOTE: The master remote control will only control the master screen; the
satellite remote control will only control the satellite screen.
-3-
Controls on Master Monitor and Master Remote Control Unit
Master Monitor Panel Controls
Figure 1.
Master Remote Control Unit
Figure 2.
FM TRANSMITTER
!
"
P OW ER
S C R EE N
MO DE
!
P LAY
"
#
S TO P
$
S OU R C E
%
AUX
& '
1. Remote Control Sensor (IR)
2. Power ON/OFF Button
3. Screen Mode Button
4. Infrared Audio Transmitter
5. Play Button
6. Stop Button
7. Source Button
8. Earphone Jack
9. AUX Input Jack
10. Eject Button
11. DVD disc insertion slot
ON/OFF
SELECT
!&
!%
!$
#
$
!#
%
!"
!!
&
&
'
!
!
!
!
"
#
$
%
&
'
'
&
%
$
#
"
!
Master Remote Control Unit Buttons (Figure 2)
* Function control is available on the unit and remote control
1. POWER ON/OFF Button* – Press this button to turn the HRDV700M master unit on. Press the
button again to turn the HRDV700M master unit off.
2. DISPLAY Button – Press this button to display the DVD Disc information listed below.
Press DISPLAY button
Once
Twice
3 times
4 times
5 times
6 times
7 times
8 times
OSD
DVD Player Perform
TITLE & CHAPTER
SUBTITLE
AUDIO
SURROUND
ANGLE
A TO B
REPEAT
Display current TITLE, CHAPTER & elapsed time
Display current SUBTITLE
Display current AUDIO language,channel & elapsed time
Display SURROUND current status & elapsed time
Display current ANGLE & elapsed time
Display A-B current status & elapsed time
Display REPEAT current status & elapsed time
Display is turn off
Use cursor buttons for title/chapter selection, then press Enter button to implement the selection.
For Subtitle, Audio, Surround, Angle, A to B & Repeat, press Enter key repeatedly to change the
options. These options may vary from disc to disc.
-4-
3. ANGLE Button – Press this button to display and select the camera angles. Each time the button
is pressed, the angle will change. NOTE: The number of angles vary from disc to disc.
4. SUBTITLE Button – Press this button to display and select the subtitle language in DVD. Each
time the button is pressed, the subtitle language changes. NOTE: The type & number of languages
for subtitles vary from disc to disc.
5. AUDIO Button – Press this button to display and select AUDIO language and channel. Each time
the button is pressed, the language or channel changes. NOTE: The languages & channel you can
select are vary from disc to disc.
6. ZOOM Button – Press this button to zoom the picture
Press ZOOM button
Once
Twice
3 times
4 times
OSD
DVD Player Perform
ZOOM x1.5
ZOOM x2
ZOOM x4
ZOOM OFF
ZOOM picture 1.5 times
ZOOM picture 2 times
ZOOM picture 4 times
picture is back to normal size
7. IRT ON/OFF Button – Press this button to turn the HRDV700M master unit IR Transmitter ON/
OFF.
) – Use these buttons to navigate the Setup Menu and change settings.
8. CURSOR Button (
9. MENU Button – Press this button to access the Main Menu.
10. RETURN Button – Press this button to return to the main page.
11. PREVIOUS Button (
12. NEXT Button (
) – Press this button to return to the previous chapter or track.
) – Press this button to skip to the next chapter or track.
13. SCAN FORWARD Button (
times the normal speed.
14. SCAN BACKWARD Button (
and 8 times the normal speed.
) – Press this button to search in a forward direction at 2,4,6 and 8
) – Press this button to search in a backward direction at 2,4,6
15. VOLUME DOWN Button (–) – Press this button to decrease the volume level of the wired headphones. This button is also used to make picture adjustments in the picture select mode.
16. VOLUME UP Button (+) – Press this button to raise the volume level of the wired headphones.
This button is also used to make picture adjustments in the picture select mode.
17. POWER Button – Press this button to turn the Video Cassette Player (VCP) ON, if equipped.
Press the button again to turn the VCP OFF.
18. EJECT Button – Press this button to eject the VCP tape.
19. PAUSE Button – Press this button to pause VCP playback.
20. STOP Button – Press this button to stop VCP playback.
21. REWIND Button (
REW) – Press this button to rewind the tape in the VCP.
22. FAST FORWARD Button (
F.FWD) – Press this button to fast forward the tape in the VCP.
23. PLAY Button ( ) – Press this button to activate the play mode while a tape is loaded.
-5-
24. PICTURE SELECT Button – Each time this button is pressed, the OSD will display the "adjustment bars" for BRIGHTNESS, CONTRAST, COLOR or TINT. Once the desired adjustment bar is
displayed, use the VOLUME UP/DOWN buttons to adjust the setting. The display will automatically
turn off if no adjustments are made within 6 seconds, or if any other button is depressed.
25. FMM SOURCE Button – Press this button to switch the FMM Modulator Audio Source to DVD or
AV1.
26. SLOW Button – Press this button to reduced the DVD viewing speed by 1/2, 1/4, 1/8 times of
normal speed.
27. STOP Button* ( ) – Press this button to stop the playback of the DVD disc.
28. PAUSE Button ( ) – Press this button to pause the playback of the DVD disc.
29. PLAY Button* ( ) – Press this button to activate the play mode while a disc is loaded into the disc
compartment.
30. A-B REPEAT Button – Press this button to repeat playback of a DVD or CD from point A to point B.
31. REPEAT Button – Press this button to repeat various titles, chapter or tracks of a DVD, CD or
MP3.
32. SETUP Button – Press this button to select the DVD player's options (Display, OSD Language,
Defaults, Parental Control, Password, Exit Setup).
33. ENTER Button – Press this button to implement the setting(s) selected.
34. MUTE Button – Press this button to mute the audio headphones. Pressing the button again will
restore the sound to the previous set level.
35. SOURCE Button* – The video signals from video equipment connected to the A/V1 or AUX inputs
can be displayed on the monitor by pressing this button. Each time the button is pressed, the
source will change in the following sequence: DVD, AV1 and AUX.
36. NUMBER Buttons – Press these buttons to enter the numbers 0 to 9 for selection of CD tracks,
DVD chapters, and password setting.
37. FM ON/OFF Button – Press this button to turn the FM Modulator power ON/OFF.
38. FM SELECT Button – Press this button to select the FM modulator Frequency (Frequency 1,
88.3MHz, Frequency 2, 88.7MHz, Frequency 3, 89.1MHz).
NOTE: VCP function buttons are for Audiovox VCP'S only.
-6-
Controls on Satellite Monitor and Satellite Remote Control Unit
Satellite Monitor Panel Controls
Satellite Remote Control Unit
Figure 1.
Figure 2.
!
"
$
#
%
P OW ER
1.
2.
3.
4.
5.
6.
7.
S C R EE N
MO DE
!
S OU R C E
"
#
AUX
$
%
Remote Control Sensor (IR)
Power ON/OFF Button
Screen Mode Button
Infrared Audio Transmitter
Source Button
Earphone Jack
AUX Input Jack
Satellite Remote Control Unit Buttons (Figure 2)
* Function control is available on the unit and the remote control.
1. POWER ON/OFF Button* – Press this button to turn the HRDV700S Satellite Unit on.
2. IRT ON/OFF Button – Press this button to turn the HRDV700S Satellite Unit IR Transmitter ON/
OFF.
3. SOURCE Button* – The video signals from video equipment connected to the A/V1 or AUX inputs
can be displayed on the monitor by pressing this button. Each time the button is pressed, the
source will change in the following sequence: DVD, AV1 and AUX.
4. PICTURE SELECT Button – Each time this button is pressed, the OSD will display the "adjustment bars" for BRIGHTNESS, CONTRAST, COLOR or TINT. Once the desired adjustment bar is
displayed, use the VOLUME UP/DOWN buttons to adjust the setting. The display will automatically turn off if no adjustments are made within 6 seconds, or if any other button is depressed.
5. VOLUME DOWN Button (–) – Press this button to decrease the volume level of the wired headphones. This button is also used to make picture adjustments in the picture select mode.
6. VOLUME UP Button (+) – Press this button to raise the volume level of the wired headphones.
This button is also used to make picture adjustments in the picture select mode.
7. MUTE Button – Press this button to mute the audio. Pressing the button again will restore the
sound to the previous set level.
-7-
OPERATION INSTRUCTION
Button Functions (HRDV700M Master Unit)
P OW E R
S C R EE N
MO DE
P LAY
S TO P
S OU R C E
AUX
There are five (5) buttons on the front of the HRDV700M Master unit: POWER, SCREEN MODE,
PLAY, STOP, SOURCE.
1) POWER
: Pressing this button will turn the unit ON/ OFF.
2) SCREEN MODE
: Pressing this button will select between 16:9 , 4:3 aspect ratio or
Screen Off (display OFF).
3) PLAY
: Pressing this button will activate the play mode.
4) STOP
: Pressing this button will stop the DVD disc.
5) SOURCE
: Pressing this button will select between DVD, AV1 and AUX.
Button Functions (HRDV700S Satellite Unit)
P OW ER
S C R EE N
MO DE
S OUR CE
AU X
There are three (3) buttons on the front of the HRDV700S Satellite unit: POWER, SCREEN MODE,
SOURCE.
1) POWER
: Pressing this button will turn the unit ON/OFF.
2) SCREEN MODE
: Pressing this button will select between 16:9, 4:3 screen format or
Screen OFF (display OFF).
3) SOURCE
: Pressing this button will select between DVD, AV1 and AUX.
NOTE: The AUX input is only available on the unit to which it is connected.
CAUTION: The AUX input cable limits screen travel. Do not force the screen open with the AUX cable
plugged in otherwise damage may result.
-8-
DVD Settings and Adjustments
This chapter describes how to set and adjust various DVD functions using the on-screen SETUP
menu.
Using the Setup Menu
The Setup Display is used for the initial setup, select the DVD playback screen rating, and set the
various outputs. You can also set a language for the on-screen display and the setup display and
limit playback by children.
1) Press the SETUP button to display the “setup menu” on the display screen.
2) Select the menu item you want using the cursor (FG) buttons, and then press the ENTER
button.
To Cancel Setup
Press the SETUP button on the remote.
Setting the Display
Press the SETUP button and select Display. The DISPLAY
SETUP allows you to adjust screen aspect ratio. Press and
then use the (FG) buttons to select the appropriate settings.
4:3 / PS
This displays a wide picture on the screen with a portion
of the left & right side removed.
4:3 / LB
This displays a wide picture with black bands on the
upper and lower portions of the screen.
16:9
This displays a picture with black bands on the upper
and lower portion of the screen.
Then press ENTER to confirm your selection.
Setting the Language for On-Screen Display
Press the SETUP button and using the (FG) buttons select
“OSD LANGUAGE”.
OSD (On-Screen Display) Language Menu
The OSD Language Menu allows the user to select the
language for the on-screen display. Press K and then use
the (FG) buttons to select the desired language then press
ENTER to confirm your selection. The user can select either
English, French or Spanish for the OSD language.
Defaults Setting
Press the SETUP button and select DEFAULTS. The
DEFAULTS RESET allows you to reset all options to the factory
settings or press and then press Enter to implement the
reset.
NOTE: This function will not effect the Parental setting.
-9-
Settings for Parental (Parental Control)
This section of the SETUP Menu allows the user to select a rating limit* from G to NO_PARENTAL.
The Parental Control function allows you to limit viewing to your preference.
and use the FG buttons to select from:
1. Press
G (Children)
PG
PG 13
R
NC-17
ADULT (Adult)
NO_PARENTAL
* NOTE: Not all discs contain the lockout feature.
2. Press the Enter button to confirm the selection.
3. Input a 4 digit password in using the numeric buttons then press the Enter button.
The Default password is 3308. This password is always effective, even after a new
password has been set.
Setting Password (Parental Control Password)
Press the SETUP button and select PASSWORD. The PASSWORD SETUP allows you to
change the parental control password. Press and then press Enter.
OLD PASSWORD
Input the old password or the default password (4 digits)
NEW PASSWORD
Input a new password (4 digits) using numeric buttons
CONFIRM PWD
Confirm the new password by entering the same new password again.
Then press Enter to implement it.
-10-
Playing Audio CDs
When playing an audio CD, the DISPLAY Banner appears automatically. It displays the current
track and the amount of the time for the track playing. The total amount of time on the disc and the
current time running on the disc. Press the DISPLAY button on the remote to change the DISPLAY
Banner. The options below show you what happens when you press the DISPLAY button.
Press DISPLAY 1x
SINGLE ELAPSED appears along with the current track playing and
the time of that track.
Press DISPLAY 2x
SINGLE REMAIN appears along with the current track playing the and
the amount of time left.
Press DISPLAY 3x
TOTAL ELAPSED appears along with the current track playing the total
time playing on the CD.
Press DISPLAY 4x
TOTAL REMAIN appears along with the current track playing and the
amount of time left on the CD.
Press DISPLAY 5x
Turns off the DISPLAY Banner.
Using the REPEAT Feature
The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the
repeat options:
• REP-ONE- repeats the track that is playing.
• REP-ALL- repeats the disc that is playing.
• REPEAT OFF
-11-
Playing MP3 Discs
MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3
format with very little loss of quality, while taking up much less space. CD-R discs that have been
encoded in MP3 format can be played on your DVD player.
Press the DISPLAY button on the remote to DISPLAY Banner. The options below show you what
happens when you press the DISPLAY button.
Press DISPLAY 1x
TIME ELAPSED appears along with the amount of time the song
has played. TIME ELAPSED and the time will remain on-screen
until you press DISPLAY again.
Press DISPLAY 2x
TIME REMAIN appears along with the amount of time left in the
song that is playing. TIME REMAIN and the time that is left remain
on-screen until you press DISPLAY again.
Press DISPLAY 3x
OFF appears along with the amount of time the song has played.
The time remains on-screen until you press DISPLAY again to
see the time left in the song that is playing or you press STOP.
..
MP3
MP3
MP3
MP3
MP3
Selecting Folders and Songs
When an MP3 disc is inserted in the player, the Smart Nav screen appears automatically. You can
change folders and songs through Smart Nav. The DVD player plays the songs in order they were
burned on to the disc.
1. If a disc is playing, press STOP. Press the up or down arrow button to go through the folder list on
the right side of the Smart Nav screen.
2. Once the folder you want is highlighted, press Enter (the folder list shifts to the left side of the
screen and the songs in the folder appear on the right).
3. Press the up or down arrow button to go through the song list and highlight the song you want.
Press Enter to begin playback of the highlighted song.
Skipping Songs
Use the Next (
) button on the remote control to move to the next song. Use the Previous (
)
button to move to the beginning of the currently playing song. Press the
button 2 times to move
to the previous song.
Using The Repeat Feature
The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the
repeat options:
• REP-ONE- repeats the songs that is playing.
•
FOLDER REP- repeats the folder that is playing.
•
FOLDER- turns off repeat and returns to regular play mode.
-12-
Selecting a Play Mode
You can choose the order that the songs will play on a disc temporarily. The FOLDER play mode is
the default. To access the play mode options, press STOP if the disc is playing. Press the right arrow
button until the PLAY MODE option is highlighted. Use the up or down arrow to choose an option. The
play mode options are:
• SINGLE: Play a selected song.
•
REP_ONE: Repeats the song that is playing.
•
FOLDER: Plays the folder in the order the songs were recorded.
•
FOLDER REP: Repeats the folder that is playing.
• DISC SCAN : Plays the song for 10 second for each song in the disc.
•
DISC: Plays the entire disc.
• DISC REP : Repeats the disc that is playing.
•
RANDOM: Plays the songs in the random order.
•
SHUFFLE ON: Plays the songs in random order (from within the selected folder)
•
PROG-PO: Plays the songs on the disc in the order you have programmed (you must create a
playlist to set the order you want the tracks on the disc to play). When you are creating a playlist,
this option changes to PROGRAM END.
Program Play
To use the program play option, you must create a playlist of songs in the order you want them to play.
Note: Once you begin adding songs from a folder to create your play list, you cannot add songs from a
different folder.
1. Choose the PROG-PO option for the PLAY MODE.
2. Highlight and enter the folder you want to program.
3. Add songs to the program list by pressing ENTER once the song is highlighted. The song you have
chosen and the number of songs you have chosen appear at the top of the screen. For example,
if you choose the number five song within the folder and it is the first song you have chosen,
PROGRAM P01:05 appears.
4. You can continue to add songs to the list from within the same folder by using the up or down arrow
button and then pressing ENTER to add it to the list.
5. When you are done creating the list, press STOP to end the programming. Then press PLAY to
begin the program play mode.
Deleting the Playlist
To delete the entire playlist, press STOP while the disc is playing and change to another play mode.
-13-
Troubleshooting
SOLUTION
PROBLEM
Poor in vehicle radio reception
(FM modulator installed)
• Check the condition of the vehicle’s radio antenna.
• Verify that the antenna is fully raised.
• Verify that it that the FM Modulator is turned OFF by using the
remote.
IR sensor inoperative
• Verify that the batteries in the remote are fresh.
• Verify that the remote sensor eye is not obstructed.
• Verify that the infrared transmitter is affixed over the sensor eye of
the component to be controlled.
Disc won’t play
• Insert a disc with the label side facing the front of the unit.
• Check the type of disc you put into disc tray. This DVD player
only plays DVD’s, audio CDs and MP3s.
• Both the unit and the disc are coded by region. If the regional
codes don’t match, the disc can’t be played. This DVD player is
Region Number 1.
Play starts, but then stops
immediately
• The disc is dirty. Clean it.
• Condensation has formed. Allow the player to dry out.
No sound or
distorted sound
• Make sure your DVD player is connected properly. Make sure all
cables are securely inserted into the appropriate jacks.
• If you are using the IR headphones, make sure you turn on the IRT
power.
• Make sure the FM Modulator is ON and the proper Frequency has
been selected.
Can’t advance
through a movie
• You can't advance through the opening credits and warning
information that appears at the beginning of movies because the
disc is programmed to prohibit that action.
The icon (
appears on
screen
• The feature or action cannot be completed at this time because:
1. The disc's software restricts it.
2. The disc's software doesn't support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You've requested a title or chapter number that is out of range.
)
Picture is
distorted
• The disc might be damaged. Try another disc.
• It is normal for some distortion to appear during forward or reverse
scan.
No forward or
reverse scan
• Some discs have sections that prohibit rapid scanning or title and
chapter skip.
• If you try to skip through the warning information and credits at the
beginning of a movie, you won't be able to. This part of the movie
is often programmed to prohibit skipping through it.
-14-
CAUTION
1.
2.
3.
4.
Keep the monitor clean and dry.
Always seek qualified personnel to perform repairs. Never attempt your own repairs.
Do not drop the monitor or expose to strong impacts.
Do not expose to direct sunlight for extended periods of time.
MONITOR SPECIFICATIONS
1. Type :
TFT Active Matrix LCD
2. Resolution:
1440 (W) x 234 (H)
3. Pixels:
336,960
4. Back Light :
Cold Cathode Fluorescent Lamp
5. Power Source :
+12 VDC
6. Power Consumption :
30W For 2 Monitors + 1 DVD
7. Connection Terminals :
Power Input 12V (Accessary, Constant, and Ground)
Audio/Video Input Jacks (RCA) x3, IR Repeater 1,
7pin JST connector x1 (for FM Modulator).
8. Operating Temperature :
32°F – 104°F (0°C – 40°C)
9. Storage Temperature :
-4°F – 176°F (-20°C – +80°C)
10. Video Display System :
NTSC/PAL
11. Backlight life :
10,000 hours
12. Headphone Audio Output :
0.03W @ 32 ohm
-15-
12 MONTH LIMITED WARRANTY
Applies to Audiovox Mobile Video Products
AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should
this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship
within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned
product (at the Company's option) without charge for parts and repair labor.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty
coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to the Company at the address
shown below.
This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna
problems, to costs incurred for installation, removal or reinstallation of the product, or to damage to tapes, discs,
speakers, accessories, or vehicle electrical systems.
This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been
damaged through alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or
defacement of the factory serial number/bar code label(s). THE EXTENT OF THE COMPANY'S LIABILITY UNDER
THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL
THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY
IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN
WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM DATE OF ORIGINAL
PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No person
or representative is authorized to assume for the Company any liability other than expressed herein in connection
with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental
or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specific
legal rights and you may also have other rights which vary from state to state.
U.S.A. : AUDIOVOX 150 MARCUS BLVD., HAUPPAUGE, NEW YORK 11788
l
1-800-645-4994
CANADA : CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION SERVING YOUR AREA
128-5495C
-16-
For C ustom er S ervice
Visit O u r W ebsite A t
999.audiovox.com
P ro duct Inform atio n, P h oto s,
FA Q ’s O w ner’s M anuals
© Copyright 2004 Audiovox Electronics Corp. 150 Marcus Blvd. Hauppauge, NY 11788
128-6913