nl ow D d de oa m fro e .b re H5360 Series User's Guide or nb de an .v w w w Acer Projector nl ow D Acer Projector H5360 Series User's Guide Original Issue: 08/2009 d de oa Copyright © 2009. Acer Incorporated. All Rights Reserved. m fro No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronically, mechanically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated. Acer Projector H5360 Series Model number: __________________________________ Serial number: ___________________________________ Date of purchase: ________________________________ Place of purchase: ________________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies. "HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC." e .b Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your projector. All correspondence concerning your unit should include the serial number, model number and purchase information. re or nb de an .v w w w Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose. nl ow D iii d de oa m fro Information for your safety and comfort w Turning the product off before cleaning or nb de an .v w w Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. • • • Install the power supply unit before connecting the power cord to the AC power outlet. Unplug the power cord before removing the power supply unit from the projector. If the system has multiple sources of power, disconnect power from the system by unplugging all power cords from the power supplies. Caution for Accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet. Warnings! • • • Do not use this product near water. Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged. Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided. • Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product. e .b Observe the following guidelines when connecting and disconnecting power to the external power supply unit: re Caution for plug as disconnecting device nl ow D iv To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp. m fro • d de oa • • • Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury. Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product. • Use the product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, type SPT-2, rated 7A 125V minimum, VDE approved or its equivalent, 4.6 meters (15 feet) maximum length. e .b • This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord. If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating. Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating. This product's AC adapter is equipped with a three-wire grounded plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details. re • or nb de an .v w • w w Using electrical power nl ow D d de oa Product servicing v m fro Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. w w liquid was spilled into the product the product was exposed to rain or water the product has been dropped or the case has been damaged the product exhibits a distinct change in performance, indicating a need for service the product does not operate normally after following the operating instructions Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition. Warning! For safety reasons, do not use non-compliant parts when adding or changing components. Consult your reseller for purchase options. Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Additional safety information • • • Do not look into the projector's lens when the lamp is on. The bright may hurt your eyes. Turn on the projector first and then signal sources Do not place the product in following environments: • • • • Space that is poorly ventilated or confined. At least 50cm clearance from walls and free flow of air around the projector is necessary. Locations where temperatures may become excessively high, such as inside of a car with all windows rolled up. Locations where excessive humidity, dust, or cigarette smoke may contaminate optical components, shortening the life span and darkening the image. • Locations near fire alarms. • • Locations with an ambient temperature above 40 ºC/104 ºF. Locations where the altitudes are higher than 10000 feet. Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It e .b • the power cord or plug is damaged, cut or frayed re • • • • • or nb de an .v w Unplug this product from the wall outlet and refer servicing to qualified service personnel when: nl ow D vi d de oa m fro • might cause fire or electric shock. In this case, unplug immediately and contact your dealer. Do not keep using this product to break or drop it. In this case contact your dealer for inspection. • • • • • • • • • • e .b • Clean the air filter frequently if have. The temperature inside may rise and cause damage when the filter/ventilation slots clogged with dirt or dust. Do not look into the air outlet grille when projector is operating. It may hurt your eyes. Always open the lens shutter or remove the lens cap when the projector is on. Do not block the projector lens with any object when the projector is under operation as this could cause the object to become heated and deformed or even cause a fire. To temporarily turn off the lamp, press HIDE on the remote control. The lamp becomes extremely hot during operation. Allow the projector to cool for approximately 45 minutes prior to removing the lamp assembly for replacement. Do not operate lamps beyond the rated lamp life. It could cause it to break on rare occasions. Never replace the lamp assembly or any electronic components unless the projector is unplugged. The product will detect the life of the lamp itself. Please be sure to change the lamp when is showing warning message. When changing the lamp, please allow unit to cool down, and follow all changing instructions. Reset the "Lamp Hour Reset" function from the Onscreen display "Management" menu after replacing the lamp module. Do not attempt to disassemble this projector. There are dangerous high voltages inside which may hurt you. The only user serviceable part is the lamp which has its own removable cover. Refer servicing only to suitable qualified professional service personnel. Do not stand the projector on end vertically. It may cause the projector to fall over, causing injury or damage. This product is capable of displaying inverted images for ceiling mount installation. Only use acer ceiling mount kit for mounting the projector and ensure it is securely installed. re • When switching the projector off, suggest to ensure the projector completes its cooling cycle before disconnecting power. Do not turn off the main power abruptly or unplug the projector during operation. It can lead to lamp breakage, fire, electric shock or other trouble. The best way is to wait for the fan to turn off before turning main power off. Do not touch air outlet grille and bottom plate which becomes hot. or nb de an .v w • • w • Do not face the projector lens to the sun. It can lead to fire. w • • nl ow D vii d de oa m fro Operating environment for using wireless function (Optional) w w To successfully transmit data files or messages, this device requires a good quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure that the above separation distance instructions are followed until the transmission is completed. Parts of the device are magnetic. Metallic materials may be attracted to the device, and persons with hearing aids should not hold the device to the ear with the hearing aid. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased. Medical devices Operation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF transmissions. Pacemakers. Pacemaker manufacturers recommend that a minimum separation of 15.3 centimeters (6 inches) be maintained between wireless devices and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers should do the following: • • Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker. Not carry the device near your pacemaker when the device is switched on. If you suspect interference, switch off your device, and move it. e .b Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. This device meets RF exposure guidelines when used normally, and it and its antenna are positioned at least 1.5 centimeters (5/8 inches) away from your body. It should not contain metal and you should position the device the abovestated distance from your body. re or nb de an .v w Warning! For safety reasons, turn off all wireless or radio transmitting devices when using your machine under the following conditions. These devices may include, but are not limited to: wireless LAN (WLAN), Bluetooth and/or 3G. nl ow D viii d de oa Hearing aids. Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider. m fro Vehicles w Potentially explosive environments Switch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refueling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust or metal powders. Caution for Listening To protect your hearing, follow these instructions. • • • • • Increase the volume gradually until you can hear clearly and comfortably. Do not increase the volume level after your ears have adjusted. Do not listen to music at high volumes for extended periods. Do not increase the volume to block out noisy surroundings. Decrease the volume if you can't hear people speaking near you. e .b Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal. re or nb de an .v w w RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer, or its representative, of your vehicle or any equipment that has been added. Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed, and the air bag inflates, serious injury could result. nl ow D d de oa Disposal instructions ix m fro Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer-group.com/public/ Sustainability/sustainability01.htm e .b re or nb de an .v w w w Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display: “Lamp(s) contain Mercury, Dispose Properly.” Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal information, check www.lamprecycle.org d de oa First thing first nl ow D x m fro Usage Notes w • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Block the slots and openings on the unit provided for ventilation. • Use abrasive cleaners, waxes or solvents to clean the unit. • Use under the following conditions: • • • • In extremely hot, cold or humid environments. In areas susceptible to excessive dust and dirt. Near any appliance that generates a strong magnetic field. Place In direct sunlight. Precautions Follow all warnings, precautions and maintenance as recommended in this user's guide to maximize the life of your unit. Warning: • • Do not look into the projector's lens when the lamp is on. The bright light may hurt your eyes. To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. • • Please do not open or disassemble the product as this may cause electric shock. • This product will detect the life of the lamp itself. Please be sure to change the lamp when it shows warning messages. • Reset the "Lamp Hour Reset" function from the Onscreen display "Management" menu after replacing the lamp module. • When switching the projector off, please ensure the projector completes its cooling cycle before disconnecting power. • • • Turn on the projector first and then the signal sources. When changing the lamp, please allow unit to cool down, and follow all changing instructions. Do not use lens cap when projector is in operation. When the lamp reaches the end of its life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under "Replacing the Lamp". e .b Don't: • re or nb de an .v w w Do: d de oa x Product Features Package Overview 1 1 2 3 3 Remote Control and Control Panel Layout 4 Getting Started 6 Connecting the Projector 6 Turning the Projector On/Off 7 Turning on the Projector 7 Turning off the Projector 8 Adjusting the Projected Image 9 Adjusting the Height of Projected Image 9 How to optimize image size and distance 10 How to get a preferred image size by adjusting distance and zoom 12 User Controls Installation menu 14 14 Acer Empowering Technology 15 Onscreen Display (OSD) Menus 16 Color 17 Image 18 Setting 21 Management 23 Audio 23 Timer 24 Language 24 Appendices 25 e .b Projector Outlook re Projector Overview x or nb de an .v w Introduction w Precautions x w Usage Notes m fro First thing first iii Contents nl ow D Information for your safety and comfort nl ow D Regulations and safety notices 34 or nb de an .v w Compatibility modes 31 w Specifications 30 w Ceiling Mount Installation 29 m Replacing the Lamp 25 fro LED & Alarm Definition Listing d de oa Troubleshooting 36 40 e .b re nl ow D w w Product Features m fro English d de oa Introduction 1 DLP® technology • Native 1280 x 720 720p resolution 4:3 / 16:9 / L.Box aspect ratio supported • Acer ColorBoost technology delivers nature's true colors for vivid, life-like images • High brightness and contrast ratio • Versatile display modes (Bright, Standard, Movie, Dark Cinema, Game, Sports, User) for optimum performance in any situation • NTSC / PAL / SECAM compatible and HDTV (720p, 1080i, 1080p) supported • Lower power consumption and economy (ECO) mode extends lamp life • Acer EcoProjeciton Technology delivers Intelligent power management approach and physical efficiency improvement. • Empowering Key reveals Acer Empowering Technology utilities (Acer eView, eTimer, ePower Management) for easy adjustment of settings • Advanced digital keystone correction optimizes presentations • Multi-language onscreen display (OSD) menus • Manual focus projection lens zooms up to 1.1X • 2X digital zoom and pan move function • Microsoft® Windows® 2000, XP, Vista®, Macintosh® OS compliant e .b • re or nb de an .v w This product is a single-chip DLP® projector. Outstanding features include: nl ow D d de oa Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if any thing is missing. m fro English 2 VGA cable e .b re Power cord or nb de an .v w w w Projector with lens cap XXXXXX 3V Composite video cable Battery Security card Acer Projector Quick Start Guide User’s guide Carrying case Remote control Quick start guide nl ow D 3 fro English d de oa Projector Overview m Projector Outlook 1 7 8 3 2 10 6 # 1 2 3 4 5 Description # Ventilation (inlet) Ventilation (outlet) Remote control receivers Focus ring Zoom lens 6 7 8 9 10 Description Lens cap Power button Remote control Zoom lever Horn Rear side 3 4 5 6 7 8 9 RS232 2 1 # Description # 6 Description 1 Power socket 2 KensingtonTM lock port 7 S-Video input connector 3 4 RS232 connector 8 Composite video input connector 5 PC analog signal/HDTV/component video 9 input connector (VGA IN) HDMI connector YPbPr input connector Audio input connector e .b 1 4 5 re 9 3 or nb de an .v w w w Front / upper side nl ow D d de oa Remote Control and Control Panel Layout m 2 1 fro English 4 3 9 8 4 # Icon 5 6 10 11 7 12 2 13 Function Description 1 Remote control receiver Receives signals from remote control. 2 POWER Refer to the "Turning the Projector On/Off" section. 3 MENU • Press "MENU" to launch the Onscreen display (OSD) menu, back to the previous step for the OSD menu operation or exit the OSD menu. • Confirm your selection of items. 4 KeyPad 0~9 Press "0~9" to input a password in the "Security". 5 ASPECT RATIO To choose the desired aspect ratio (Auto/4:3/16:9/L.Box). 6 RESYNC Automatically synchronizes the projector to the input source. 7 FREEZE To pause the screen image. 8 KEYSTONE Adjusts the image to compensate for distortion caused by tilting the projector (± 40 degrees). 9 Four directional Use up, down, left, right buttons to select items or make select keys adjustments to your selection. 10 ZOOM Zooms the projector display in or out. 11 SOURCE Changes the active source. 12 HIDE Momentarily turns off the video. Press "HIDE" to hide the image, press again to display the image. e .b re or nb de an .v w w w 8 nl ow D Function Description Unique Acer functions: eView, eTimer, ePower Management. m fro Empowering key English Icon d de oa # 13 5 e .b re or nb de an .v w w w Note: Remote Control Placement Please refer to the illustration to attach the remote control to the projector. nl ow D d de oa Getting Started m fro VGA DVD player D-Sub 2 3 R B G RS232 DVD player, Set-top Box, HDTV receiver HDMI D-Sub 4 6 5 HDMI R B G RS232 Y 1 9 7 S-Video Output Y Video Output # Description 8 # 6 Description 1 Power cord Audio cable jack/jack 2 RS232 cable 7 Audio cable Jack/RCA 3 VGA cable 8 Composite video cable 4 HDMI cable 9 S-Video cable 5 3 RCA component cable Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. e .b re or nb de an .v w w w Connecting the Projector R W English 6 nl ow D 7 d de oa fro English Turning the Projector On/Off m Turning on the Projector w w Remove the lens cap.(Illustration #1) 2 Ensure that the power cord and signal cable are securely connected. The Power indicator LED will flash red. 3 Turn on the projector by pressing "Power" button on the control panel, and the Power indicator LED will turn blue. (Illustration #2) 4 Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically. If the screen displays "Lock" and "Source" icons, it means the projector is locked onto a specific source type and there is no such type of input signal detected. • If the screen displays "No Signal", please make sure the signal cables are securely connected. • If you connect to multiple sources at the same time, use the "Source" button on the remote control to switch between inputs. 2 Power button 1 Lens cap e .b • re or nb de an .v w 1 nl ow D Turning off the Projector To turn off the projector, press the "Power" button twice. The message below will display onscreen for 5 seconds. m fro 1 d de oa English 8 w w "Please press power button again to complete the shutdown process." Immediately after powering off, the Power indicator LED will flash RED rapidly and the fan(s) will continue to operate for about 120 seconds. This is to ensure that the system cools correctly. 3 Once the system has finished cooling, the Power indicator LED will turn solid RED which means projector enter standby mode. 4 It is now safe to unplug the power cord. e .b re or nb de an .v w 2 Warning: Do not turn on the projector immediately after powering off. Note: If you wish to turn the projector back on, you must wait for 60 seconds at least to press the "Power" button to restart the projector. Warning indicators: • If the projector automatically shuts down and the Power indicator quick flashing RED and steady BLUE by returns, please contact your local reseller or service center. • If the projector automatically shuts down and the Power indicator quick flashing RED and steady BLUE by returns, this indicates that the projector has overheated. The message below will display onscreen if this is about to happen: "Projector Overheated. Lamp will automatically turn off soon." • If the Power indicator quick flashing RED and steady BLUE by returns and the message below is displayed onscreen, please contact your local dealer or service center: "Fan fail. Lamp will automatically turn off soon." nl ow D 9 d de oa Adjusting the Height of Projected Image m fro English Adjusting the Projected Image w w or nb de an .v w The projector is equipped with elevator feet for adjusting the height of image. To raise/lower the image: 1 Use Tilt adjusting wheel (Illustration #1) to fine-tune the display angle. e .b re 1 Tilt adjusting wheel nl ow D d de oa How to optimize image size and distance fro Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. Example: If the projector is 3 m from the screen, good image quality is possible for image sizes between 80" and 87". m English 10 or nb de an .v w w w Note: Remind as below figure, the space of 122 cm height is required when located at 3m distance. e .b re Max scree n size Min s creen size B 87" 80 " Height: 122cm Form base to top of image Height: 112cm C A 3m Desired Distance Figure: Fixed distance with different zoom and screen size. nl ow D fro (Max zoom) m From base to top of image (cm) <C> or nb de an .v w W (cm) x H (cm) w From base to Diagonal top of image (inch) <B> (cm) <C> w W (cm) x H (cm) Top Screen size (Min zoom) 1 27 59 x 33 37 29 65 x 36 1.5 40 88 x 50 56 44 97 x 54 2 53 118 x 66 74 58 129 x 73 2.5 66 147 x 83 93 73 161 x 91 3 80 176 x 99 112 87 194 x 109 3.5 93 206 x 116 130 102 226 x 127 143 4 106 235 x 132 149 117 258 x 145 163 4.5 120 265 x 149 167 131 290 x 163 184 5 133 294 x 165 186 146 323 x 181 204 6 159 353 x 199 223 175 387 x 218 245 7 186 412 x 232 260 204 452 x 254 286 8 213 471 x 265 298 233 516 x 290 326 9 239 529 x 298 335 262 581 x 327 367 10 266 588 x 331 372 291 645 x 363 408 10.3 274 606 x 341 383 300 665 x 374 420 41 61 82 102 122 e .b re Zoom Ratio: 1.1x English d de oa Top Screen size Desired Distance (m) Diagonal <A> (inch) <B> 11 nl ow D d de oa How to get a preferred image size by adjusting distance and zoom m fro English 12 or nb de an .v w w w e .b re A 50" Desir e imag d es ize D Height Form base to top of image 1.7 m 1.9 m C B Desired Distance The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. Example: to obtain an image size of 50" set the projector at a distance 1.7 m and 1.9 m from the screen and adjust the zoom level accordingly. nl ow D 13 fro Distance (m) Top (cm) m W (cm) x H (cm) Max zoom <B> Min zoom <C> 30 66 x 37 1.0 1.1 40 89 x 50 1.4 1.5 56 50 111 x 62 1.7 1.9 70 60 133 x 75 2.1 2.3 84 70 155 x 87 2.4 2.6 98 80 177 x 100 2.7 3.0 112 199 x 112 3.1 3.4 126 221 x 125 3.4 3.8 140 120 266 x 149 4.1 4.5 168 150 332 x 187 5.1 5.6 210 180 398 x 224 6.2 6.8 252 200 443 x 249 6.9 7.5 280 250 553 x 311 8.6 9.4 350 300 664 x 374 10.3 *** 420 e .b 90 100 re or nb de an .v w w w Diagonal (inch) <A> From base to top of image <D> 42 Zoom Ratio: 1.1x English d de oa Desired Image Size nl ow D User Controls d de oa w w Installation menu m fro English 14 1 Turn on the projector by pressing "Power" button on the control pad. 2 Press the "MENU" button on the control pad to launch the OSD for projector installation and maintenance. 3 The background pattern acts as a guide to adjusting the calibration and alignment settings, such as screen size and distance, focus and more . 4 The Installation menu includes the following options: •Projection method •Projection location •Menu location •Keystone settings •Language settings •Reset to factory default function Use the up and down arrow keys to select an option, the left and right arrow keys to adjust selected option settings, and the right arrow key to enter a submenu for feature setting. The new settings will be saved automatically upon exiting the menu. 5 Push the menu button anytime to exit the menu and return to the Acer welcome screen. e .b The menu options include settings and adjustments for screen size and distance, focus, keystone correction and more . re or nb de an .v w The installation menu provides an onscreen display (OSD) for projector installation and maintenance. Use the OSD only when the message "No signal input" is displayed on the screen. nl ow D 15 d de oa Acer Empowering Key provide three Acer unique functions, they are "Acer eView Management", "Acer eTimer Management" and "Acer ePower m Key fro Empowering English Acer Empowering Technology or nb de an .v w w w Management" respectively. Press " " key for more than one second to launch the Onscreen display main menu to modify its function. "Acer eView Management" is for display mode selection. Please refer to Onscreen Display Menus section for more detail. Acer eTimer Management Acer ePower Management Press " " to launch "Acer eTimer Management" submenu. "Acer eTimer Management" provides the reminding function for presentation time control. Please refer to Onscreen Display Menus section for more detail. Press " " to launch "Acer ePower Management". "Acer ePower Management" provides user one shortcut to save lamp and projector life. Please refer to Onscreen Display section for more detail. e .b Press " " to launch "Acer eView Management" submenu. re Acer eView Management nl ow D d de oa Onscreen Display (OSD) Menus fro The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings. m English 16 • To open the OSD menu, press "MENU" on the remote control. • When the OSD is displayed, use the keys to select any item in the using the keys to select the desired item and adjust the settings by keys. • Select the next item to be adjusted in the submenu and adjust as described above. • Press "MENU" on the remote control, the screen will return to the main menu. • To exit OSD, press "MENU" on the remote control again. The OSD menu will close and the projector will automatically save the new settings. Main menu Setting Sub menu e .b Use the to enter re main menu. After selecting the desired main menu item, press submenu for feature setting. • or nb de an .v w w w Using the OSD menus nl ow D 17 m fro English d de oa Color There are many factory presets optimized for various types of images. • • • • • • • Bright: For brightness optimization. Standard: For common environment. Movie: For brighter and general movie/video/photo playing. Dark Cinema: For dark movie content. Game: For game content. Sports: For sport picture. User: Memorize user’s settings. Wall color Use this function to choose a proper color according to the wall. There are several choices, including white, light yellow, light blue, pink, dark green. It will compensate the color deviation due to the wall color to show the correct image tone. Brightness Adjust the brightness of the image. Contrast • Press to darken image. • Press to lighten the image. "Contrast" controls the difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. • Press to decrease the contrast. • Press to increase the contrast. Color Temperature Adjust the color temperature. At higher color temperatures, the screen looks colder; at lower color temperatures, the screen looks warmer. Degamma Effects the representation of dark scenery. With greater gamma value, dark scenery will look brighter. Color R Adjusts the red color. Color G Adjusts the green color. Color B Adjusts the blue color. e .b re or nb de an .v w w w Display Mode nl ow D d de oa Saturation Adjusts a video image from black and white to fully saturated color. • Press to decrease the amount of color in the image. • Press to increase the amount of color in the image. m or nb de an .v w Adjusts the color balance of red and green. w w Tint fro English 18 • Press to increase the amount of green in the image. • Press to increase the amount of red in the image. Image Projection mode • Front: The factory default setting. • Rear: Reverses the image so you can project from behind a translucent screen. • Auto: Automatically adjusts projection location of image. • Desktop • Ceiling: Turns the image upside down for ceiling-mounted projection. Projection Location e .b re Note: "Saturation" and "Tint" functions are not supported under computer mode or DVI mode. nl ow D 19 fro English d de oa Use this function to choose your desired aspect ratio. • Auto: Keep the image with original width-higth ratio and maxi mize the image to fit native horizontal or vertical pixels. • 4:3: The image will be scaled to fit the screen and displayed using a 4:3 ratio. • 16:9: The image will be scaled to fit the width of the screen and the height adjusted to display the image using a 16:9 ratio. Auto Keystone Automatically adjusts vertical image. Manual Keystone Adjust image distortion caused by tilting projection. (±40 degrees) m Aspect Ratio H. Position (Horizontal position) • Press to move the image left. • Press to to move the image right. V. Position (Vertical position) • Press to move the image down. • Press to move the image up. Frequency "Frequency" changes the projector's refresh rate to match the frequency of your computer’s graphics card. If you can see a vertical flickering bar in the projected image, use this function to make the necessary adjustments. Tracking Synchronizes the signal timing of the projector with the graphics card. If you experience an unstable or flickering image, use this function to correct it. Sharpeness 3D 3D Sync L/R Adjusts the sharpness of the image. • Press to decrease the sharpness. • Press to increase the sharpness. Choose "NVIDIA 3D Vision" or "DLP 3D" to enable 3D function supported by NVIDIA or TI DLP 3D technology. • NVIDIA 3D Vision: Choose this item while using NVIDIA 3D glasses, IR emitter, NVIDIA graphic card and NVIDIA compliant 3D games or 3D movie with corresponding SW player. Please visit NVIDIA URL (http://www.nvidia.com/object 3D_Vision_Requirements.html) to check detail system configuration. • DLP 3D: Choose this item while using DLP 3D glasses, quad buffer (NVIDIA/ATI...) graphic card and HQFS format file or DVD with corresponding SW player. • Off: Turn off 3D mode. If you see a discrete or overlapping image while wearing DLP 3D glasses, you may need to execute "Invert" to get best match of left/ right image sequence to get the correct image (for DLP 3D). Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions are not supported under DVI or Video mode. e .b re or nb de an .v w w w <Note> The Manual Keystone funcion is unavailable under Auto Keystone setting to "On". d de oa Note: "Sharpness" functions is not supported under DVI and Computer mode. Note: While using NVIDIA 3D Vison, please download and install latest NVIDIA 3D VISION driver from NVIDIA web site for your graphic card to support this projector. Note: It needs correct settings on graphic card 3D application program for correct 3D display. Note: The SW players, such as Stereoscopic Player and DDD TriDef Media Player can support 3D format files. You can download these three players on web page below, - NVIDIA Stereoscopic 3D Video Player: http://www.nvidia.com/object/3D_Drivers_Downloads.html - Stereoscopic Player (Trial): http://www.3dtv.at/Downloads/Index_en.aspx - DDD TriDef Media Player (Trial): http://www.tridef.com/download/TriDef-3-D-Experience-4.0.2.html Note: "3D Sync L/R" is only available when 3D is enabled. Note: There has reminder screen if 3D still enable when power on projector. Please adjust setting depended on your purpose. m fro English nl ow D 20 e .b re or nb de an .v w w w nl ow D 21 m fro English d de oa Setting Choose the menu location on the display screen. Source Lock When source lock is turned "off", the projector will search for other signals if the current input signal is lost. When source lock is turned "on", it will "lock" the current source channel unless you press "Source" button on the remote control for the next channel. Closed Caption Selects a preferred closed captioning mode from CC1, CC2, CC3, CC4, (CC1 displays captions in the primary language in your area). Select "Off" to turn off the captioning feature. This function is only available when a composite video or S-Video input signal is selected and its system format is NTSC. <Note> This function is not available when the aspect ratio is "16:9" or 16:9 format detected under "Auto mode".. Security Security This projector provides a useful security function for the administrator to manage usage of the projector . Press to change the "Security" setting. If the security function is enabled, your must enter the "Administrator Password" first before changing the security settings. • Select "On" to enable the security function. The user has to enter a password to operate the projector. Please refer to the "User Password" section for details. • If "Off" is selected, then the user can turn on the projector without password. Timeout(Min.) Once "Security" is activated to "On", the administrator can set timeout function. • Press • • The range is from 10 minute to 990 minutes. • • The factory default setting of "Timeout(Min.)" is "Off". or to select the timeout interval. When the time is up, the projector will prompt the user to enter the password again. Once the security function is enabled, the projector will request user to enter password when switch on the projector . Both "User Password" and "Administrator Password" can be accepted for this dialogue. e .b re or nb de an .v w w w Menu Location nl ow D 22 d de oa • • Press • Press • Enter the password when you see "Confirm Password" displayed. • • The password should be between 4 and 8 characters long. • If you select "Always request password while projector turns on", the user has to enter the password every time when the projector is turned on. to setup or change the "User Password". fro Press number keys to set your password on the remote control and press "MENU" to confirm. m English User password If you select "Request password only after plugging power cord", the projector will prompt the user to enter the password every time the power cord is plugged. The "Administrator Password" can be used in both the "Enter Administrator Password" and "Enter Password" dialog boxes. • • Press to change the "Administrator Password". The factory default of "Administrator Password" is "1234". If you forgot your administrator password, do the following to retrieve the administrator password: Reset • An unique 6-digit "Universal Password" which is printed on the Security Card (please check accessory in the box). This unique password is the number which will be accepted by projector anytime no matter what the Administrator Password is. • If losing this security card and number, please contact with an Acer service center. • Press the button and choose "Yes" to return the parameters on all menus to the factory default settings. e .b Administrator Password re or nb de an .v w w w to delete character. nl ow D 23 m fro English d de oa Management Choose "On" to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose "Off" to return normal mode. High Altitutde Choose "On" to turn on High Altitude mode. Operate the fans at full speed continuously to allow for proper high altitude cooling of the projector. Auto Shutdown The projector will automatically shutdown when there is no signal input after the allocated time. (in minutes) Lamp Hour Elapse Displays the lamp’s elapsed operating time (in hours). Lamp Reminding Activate this function to display a reminder to change the lamp 30 hours before its expected end-of-life. Lamp Hour Reset Press the button and choose "Yes" to turn the lamp hour counter to 0 hours. Audio Volume • Press to decrease the volume. • Press to increase the volume. Choose "On" to mute the volume. Choose "Off" to restore the volume. Power On/Off Volume • • • Alarm Volume • Select this function to adjust the volume of any warning votifications. Mute Select this function to adjust the notification volume when turning the projector on/off. e .b re or nb de an .v w w w ECO Mode nl ow D d de oa Timer m fro English 24 e .b re or nb de an .v w w w Timer Location • Choose the location of the timer on the screen. Timer Start • Press to start or stop the timer. Timer Period • Press or Timer Volume • Select this function to adjust the nitification volume when the timer function is enabled and time is up. Timer Display • Press or to adjust the timer period. to which timer mode to display on the screen. Language Language Choose the multilingual OSD menu. Use the to select your preferred menu language. • Press to confirm the selection. or key nl ow D 25 m fro English d de oa Appendices w w Troubleshooting or nb de an .v w If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions 1 2 Problem No image appears onscreen Partial, scrolling or incorrectly displayed image(For PC (Windows 95/98/ 2000/XP)) Solution • Connected as described in the "Getting Started" section. • Ensure none of the connector pins are bent or broken. • Check if the projector lamp has been securely installed. Please refer to the "Replacing the Lamp" section. • Make sure you have removed the lens cap and the projector is switched on. • • Press "RESYNC" on the remote control. For an incorrectly displayed image: • Open "My Computer," open the "Control Panel," and then double-click the "Display" icon. • Select the "Settings" tab. • Verify that your display resolution setting is lower than or equal to UXGA (1600 x 1200). • Click the "Advanced Properties" button. If the problem still appears, change the monitor display you are using and follow the steps below: • Verify that the resolution setting is lower than or equal to UXGA (1600 x 1200). • Click the "Change" button under the "Monitor" tab. • Click "Show all devices". Next, select "Standard monitor types" under the SP box, and choose the resolution mode you need under the "Models" box. • Verify that the resolution setting of the monitor display is lower than or equal to UXGA (1600 x 1200). e .b re # nl ow D 3 • • Press "RESYNC" on the remote control. • If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector. • If you are using a Microsoft® Windows® based notebook: Some notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. Refer to your computer's manual for detailed information. • If you are using an Apple® Mac® OS based notebook: In System Preferences, open Display and select Video Mirroring "On". • Adjust the "Tracking" to correct it. Refer to the "Image" section for more information. • Change the display color depth settings on your computer. • Use "Frequency" to make an adjustment. Refer to the "Image" section for more information. • Check and reconfigure the display mode of your graphics card to make it compatible with the projector. • • • Make sure the lens cap is removed. For an incorrectly displayed image: • Follow the steps for item 2 (above) to adjust the resolution of your computer. • Press the toggle output settings. Example: [Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8], Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5 ] m fro Partial, scrolling or incorrectly displayed image (For notebooks) d de oa English 26 7 8 Image has vertical flickering bar Image is out of focus Image is stretched when displaying a "widescreen" DVD title Adjusts the focus ring on the projector lens. Make sure the projection screen is within the required distance of 3.3 to 33.8 feet (1.0 to 10.3 meters) from the projector. Refer to the "How to Get a Preferred Image Size by Adjusting Distance and Zoom" section for more information. When you play a DVD encoded in anamorphic or 16:9 aspect ratio you may need to adjust the following settings: • If you play a 4:3 format DVD title, please change the format to 4:3 in the projector OSD. • If the image is still stretched, you will also need to adjust the aspect ratio. Set up the display format to 16:9 (wide) aspect ratio on your DVD player. e .b 6 Image is unstable or flickering re 5 The screen of the notebook computer is not displaying your presentation or nb de an .v w w w 4 nl ow D Adjust the zoom lever on the front of the projector. • Press "MENU" on the remote control. Go to "Image --> Aspect Ratio" and try different settings or press"Aspect Ratio" on the remote control to adjust directly. • If possible, reposition the projector so that it is centered on the screen. • Press the "Keystone / " button on the remote control until the sides are vertical. • Press "MENU" on the remote control. Go to "Image -> Auto Keystone" and choose "Off" on the OSD, if "Keystone" button is not available on the remote control. • Select "Image --> Projection" on the OSD and adjust the projection direction. English • • Move the projector closer to or further from the screen. m fro Image is too small or too large d de oa 9 27 Problems with the Projector # Condition Solution 1 The projector stops responding to all controls If possible, turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power. 2 Lamp burns out or makes a popping sound When the lamp reaches the end of its useful life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the "Replacing the Lamp" section. e .b Image is reversed re 11 Image has slanted sides or nb de an .v w w w 10 nl ow D OSD Messages Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. e .b re or nb de an .v w w Fan Fail - the system fan is not working. w Message Message Reminder m 1 Condition fro # d de oa English 28 Replace the lamp - the lamp is about to reach its maximum lifetime. Prepare to replace it soon. nl ow D 29 d de oa fro English LED & Alarm Definition Listing LED Messages m Blue Flash ON to OFF 100ms -- Standby V -- Power button ON -- V Lamp retry -- Quick Flashing Quick Flashing -- V -- Input Power Plug Power off (Cooling state) Power button OFF: Cooling completed; Standby Mode Error (Thermal Failure) Quick Flashing RED and Steady BLUE by returns Error (Fan lock) Quick Flashing RED and Steady BLUE by returns Error (Lamp breakdown) Quick Flashing BLUE and Steady RED by returns Error (Color Wheel fail) Quick Flashing BLUE and Steady RED by returns e .b Red re or nb de an .v w w w Power LED Message nl ow D d de oa Replacing the Lamp Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp. m fro English 30 1 3 2 4 To Change the Lamp 1 Turn off the projector by pressing the Power button. 2 Allow the projector at least 30 mins to cool down. 3 Disconnect the power cord. 4 Use a screwdriver to remove the screw from the cover. (Illustration #1) 5 Push up and remove the cover. 6 Remove the two screws that secure the lamp module (Illustration #2) and pull up the lamp bar.(Illustration #3) 7 Pull out the lamp module by force. (Illustration #4) To replace the lamp module, reverse the previous step. Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped. e .b Warning: The lamp compartment is hot! Allow it to cool down before changing the lamp. re or nb de an .v w w w The projector will detect the lamp life. You will be shown a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!" When you see this message, change the lamp as soon as possible. Make sure the projector has been cooling down for at least 30 minutes before changing the lamp. nl ow D English d de oa Ceiling Mount Installation 31 m fro If you wish to install the projector using a ceiling mount, please refer to the steps below: w w 2 m 13 m mm 130 mm 8.4 .9 49mm Note: Screws are not included. Please obtain the appropriate screws for your type of ceiling. 2 Secure the ceiling rod using the appropriate type of four-cylinder screws. Ceiling Mount Base - Attach to ceiling Short Rod Long Rod Extension Rod Screw Type A 50 mm length / 8 mm diameter - Long Cylinder Cap Allen Key - For tightening/looseni Tightening Screw Medium Rod e .b re m 0 m Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. or nb de an .v w 1 nl ow D 3 d de oa Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. Screw Type B m Smaller Washer fro English 32 w Projector Bracket Supports projector and allows for adjustments Spacer or nb de an .v w w Large Washer - For heat dissipation e .b re Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution. Use two washers for extra support, if deemed necessary. 4 Attach the ceiling bracket to the ceiling rod. Large cylinder cap Allen Key Screw Type A 50 mm length 08 mm diameter - For tightening/loosening Tightening Screw nl ow D d de oa Adjust the angle and positioning as necessary. m fro English 5 33 w w Tightening Screw or nb de an .v w Allen Key 3 e .b re Allen Key Tightening Screw Note: The appropriate type of screw and washer for each model is listed in the table below. 3 mm diameter screws are enclosed in the screw pack. Models Washer Type Length (mm) Large Small 3 25 V V SCREW SPEC. M3 x 25 mm 82.30 mm H5360 Screw Type B Diameter (mm) 95.00 mm 15.00 mm nl ow D d de oa Specifications The specifications listed below are subject to change without notice. For final specs, please refer to Acer's published marketing specifications. m fro English 34 w DLP® Resolution H5360: Native: 720P (1280 x 720) , Maximum: UXGA (1600 x 1200), WSXGA+ (1680x1050), 1080p(1920x1080) Computer compatibility IBM PC and compatibles, Apple Macintosh, iMac and VESA standards: SXGA, XGA, VGA, SVGA, SXGA+, WXGA, WXGA+, WSXGA + Video compatibility NTSC (3.58/4.43), PAL (B/D/G/H/I/M/N), SECAM (B/D/G/ K/K1/L), HDTV (720p, 1080i, 1080p), EDTV (480p, 576p), SDTV (480i, 576i) Auto, 4:3, 16:9, L.Box Displayable colors 1.07 Billion colors Projection lens F/ 2.5 - 2.67, f = 21.86 mm - 24.00 mm, 1.1X manual zoom lens Projection screen size (diagonal) 27" (0.69m) - 300" (7.62 m) Projection distance 3.3' (1.0 m) - 33.8' (10.3 m) Throw ratio 58"@2m (1.55 - 1.70:1) Horizontal scan rate 30k - 100 kHz Vertical refresh scan rate 50-85 Hz, 120Hz (for 3D mode only) Lamp type 200W user-replaceable lamp Keystone correction ± 40 degrees Audio Internal speaker with 2 W output Weight 2.26 Kg (4.9 lbs.) Dimensions (W x D x H) 268 mm x 192 mm x 80 mm (10.6" x 7.6" x 3.1") Digital Zoom 2X Power supply AC input 100 - 240 V auto-switching power supply Power consumption 248W ± 10% for normal mode 201W ± 10% for ECO mode Operating temperature 5ºC to 35ºC / 41ºF to 95ºF I/O connectors • • • • • • • • Power socket x1 VGA input x1 RS232 x1 Composite video x1 S-Video x1 3 RCA Component video x1 HDMI x1 3.5 mm audio jack input x1 e .b Aspect ratio re or nb de an .v w w Projection system nl ow D VGA cable x1 English AC power cord x1 fro Composite video cable x1 Remote control x1 m Quick start guide x1 Security card x1 Carrying case x1 * Design and specifications are subject to change without notice. e .b re or nb de an .v w User's guide (CD-ROM) x1 w Battery x1 (for remote control) w • • • • • • • • • d de oa Standard package contents 35 nl ow D d de oa Compatibility modes fro A. VGA Analog VGA Analog - PC Signal w w 1 m English 36 Resolution V.Frequency [Hz] H.Frequency [KHz] VGA 640x480 60 31.47 640x480 72 37.86 640x480 75 37.50 640x480 85 43.27 640x480 119.51 61.60 800x600 56 35.20 800x600 60 37.88 800x600 72 48.08 800x600 75 46.88 800x600 85 53.67 800x600 119.85 77.20 1024x768 60 48.36 1024x768 70 56.48 1024x768 75 60.02 1024x768 85 68.67 1024x768 119.804 98.80 SXGA 1152x864 70 63.80 1152x864 75 67.50 1152x864 85 77.10 1280x1024 60 63.98 1280x1024 72 77.90 1280x1024 75 79.98 1280x1024 85 91.15 QuadVGA 1280x960 60 60.00 1280x960 75 75.00 SXGA+ 1400x1050 60 65.32 UXGA 1600x1200 60 75.00 PowerBook G4 640x480 60 31.50 PowerBook G4 640x480 66.6(67) 35.00 PowerBook G4 800x600 60 37.88 PowerBook G4 1024x768 60 48.36 PowerBook G4 1152x870 75 68.68 PowerBook G4 1280x960 75 75.20 i Mac DV(G3) 1024x768 75 60.30 e .b XGA re SVGA or nb de an .v w Modes nl ow D H.Frequency [KHz] 47.78 60.29 68.63 44.80 92.89 49.60 47.71 55.90 65.30 66.60 66.60 37.30 m 480i 480p 576i 576p 720p 720p 1080i 1080i 1080p 1080p 720x480 720x480 720x576 720x576 1280x720 1280x720 1920x1080 1920x1080 1920x1080 1920x1080 59.94(29.97) 59.94 50(25) 50 60 50 60(30) 50(25) 60 50 27.00 31.47 27.00 31.25 45.00 37.50 33.75 33.75 67.50 56.26 B. HDMI Digital (1) HDMI - PC Signal(same as DVI) Modes Resolution V.Frequency [Hz] H.Frequency [KHz] VGA 640x480 60 31.47 640x480 72 37.86 640x480 75 37.50 640x480 85 43.27 SVGA XGA 640x480 119.51 61.61 800x600 56 35.20 800x600 60 37.88 800x600 72 48.08 800x600 75 46.88 800x600 85 53.67 800x600 119.85 77.20 1024x768 60 48.36 e .b VGA Analog -Component Signal re or nb de an .v w w w V.Frequency [Hz] 60 75 85 60 119.858 60 60 60 60 60 60 60 fro WXGA+ WSXGA Resolution 1280x768 1280x768 1280x768 1280x720 1280x720 1280x800 1366x768 1440x900 1680x1050 1920x1080-RB 1920x1080-EIA 1024x600 English VGA Analog - Extended Wide timing Modes WXGA 3 d de oa 2 37 nl ow D 1024x768 70 56.48 1024x768 75 60.02 1024x768 119.804 1152x864 70 m fro 98.80 67.50 w SXGA d de oa English 38 85 60 77.10 64.00 1280x1024 72 77.90 1280x1024 75 79.98 1280x1024 85 91.15 QuadVGA 1280x960 75 75.00 PowerBook G4 640x480 60 31.50 PowerBook G4 640x480 66.6(67) 35.00 PowerBook G4 800x600 60 37.88 PowerBook G4 1024x768 60 48.36 PowerBook G4 1152x870 75 68.68 PowerBook G4 1280x960 75 75.20 i Mac DV(G3) 1024x768 75 60.30 Modes WXGA WXGA+ WSXGA Resolution 1280x768 1280x768 1280x768 1280x720 1280x720 1280x800 1366x768 1440x900 1680x1050 1920x1080-RB 1920x1080-EIA 1024x600 V.Frequency [Hz] 60 75 85 60 119.858 60 60 60 60 60 60 60 H.Frequency [KHz] 47.78 60.29 68.63 44.80 92.89 49.60 47.71 55.90 65.30 66.60 66.60 37.30 (3) HDMI - Video Signal 480i 720x480 59.94(29.97) 27.00 480p 720x480 59.94 31.47 576i 720x576 50(25) 27.00 576p 720x576 50 31.25 720p 1280x720 60 45.00 720p 1280x720 50 37.50 1080i 1920x1080 60(30) 33.75 e .b (2) HDMI - Extended Wide timing(same as DVI) re or nb de an .v w w 1152x864 1280x1024 nl ow D 39 50(25) 33.75 60 67.50 1080p 1920x1080 m 56.26 30-100kHz w w 50-85 Hz, 120Hz (for 3D mode only) 170MHz e .b re or nb de an .v w Horizontal scan rate: Graphic source moniVertical scan rate: tor range limits Max. pixel rate: 50 fro 1920x1080 1920x1080 English d de oa 1080i 1080p nl ow D d de oa Regulations and safety notices m FCC notice fro English 40 • Reorient or relocate the receiving antenna. • Increase the separation between the device and receiver. • Connect the device into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/television technician for help. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. Notice: Peripheral devices Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception. Caution Changes or modifications not expressly approved by the manufacturer could void the user's authority, which is granted by the Federal Communications Commission, to operate this device. Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003. e .b However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: re or nb de an .v w w w This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. nl ow D 41 d de oa English English Remarque à l'intention des utilisateurs canadiens m fro Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Common information Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. b Operation in 2.4 GHz band To prevent radio interference to the licensed service, this device is intended to be operated indoors and installation outdoors is subject to licensing. Declaration of Conformity for EU countries Acer hereby, declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Compliant with Russian regulatory certification Radio device regulatory notice Note: The regulatory information below is for models with wireless LAN and/or Bluetooth only. General This product complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Depending on configurations, this product may or may not contain wireless radio devices (such as wireless LAN and/or Bluetooth modules). The below information is for products with such devices. e .b a re or nb de an .v w w w Canada — Low-power license-exempt radio communication devices (RSS-210) nl ow D European Union (EU) d de oa R&TTE Directive 1999/5/EC as attested by conformity with the following harmonized standard: m fro English 42 EN60950-1:2001 + A11:2004 • EN50371:2002 Article 3.1(b) EMC EN301 489-1 V1.6.1 • EN301 489-3 V1.4.1 (Applicable to non-bluetooth wireless keyboard mouse set) • EN301 489-17 V1.2.1 Article 3.2 Spectrum Usages • EN300 440-2 V1.1.2 (Applicable to non-bluetooth wireless keyboard mouse set) • EN300 328 V1.7.1 • EN301 893 V1.4.1 (Applicable to 5GHz high performance RLAN) List of applicable countries EU member states as of May 2004 are: Belgium, Denmark, Germany, Greece, Spain, France, Ireland, Italy, Luxembourg, the Netherlands, Austria, Portugal, Finland, Sweden, United Kingdom Estonia, Latvia, Lithuania, Poland, Hungary, Czech Republic, Slovak Republic, Slovenia, Cyprus and Malta. Usage allowed in the countries of European Union, as well as Norway, Switzerland, Iceland and Liechtenstein. This device must be used in strict accordance with the regulations and constraints in the country of use. For further information, please contact a local office in the country of use. e .b • re or nb de an .v w • • w • Article 3.1(a) Health and Safety w • nl ow D d de oa m fro w w Acer America Corporation Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The following local Manufacturer / Importer is responsible for this declaration: Product: DLP Projector Model Number: H7P0901 Machine Type: H5360 series Name of Responsible Party: Acer America Corporation Address of Responsible Party: 333 West San Carlos St. San Jose, CA 95110 U. S. A. Contact Person: Acer Representative Phone No.: 254-298-4000 Fax No.: 254-298-4147 e .b re or nb de an .v w 333 West San Carlos St., San Jose CA 95110, U. S. A. Tel : 254-298-4000 Fax : 254-298-4147 www.acer.com nl ow D d de oa m fro w w Acer Incorporated Declaration of Conformity We, Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan Contact Person: Mr. Easy Lai, e-mail:firstname.lastname@example.org And, Acer Europe SA Via Cantonale, Centro Galleria 2 6928 Manno Switzerland Hereby declare that: Product: Trade Name: Model Number: Machine Type: Projector Acer H7P0901 H5360 series Is compliant with the essential requirements and other relevant provisions of the following EC directives, and that all the necessary steps have been taken and are in force to assure that production units of the same product will continue comply with the requirements. EMC Directive 2004/108/EC as attested by conformity with the following harmonized standards: -. EN55022, AS/NZS CISPR22, Class B -. EN55024 -. EN61000-3-2 Class A -. EN61000-3-3 Low Voltage Directive 2006/95/EC as attested by conformity with the following harmonized standard: -. EN60950-1: 2001 + A11: 2004 RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances in Electrical and Electronic Equipment -. The maximum concentration values of the restricted substances by weight in homogenous material are: Lead 0.1% Polybrominated Biphenyls (PBB’s) 0.1% Mercury 0.1% Polybrominated Diphenyl Ethers (PBDE’s) 0.1% Hexavalent Chromium 0.1% Cadmium 0.01% Directive 2005/32/EC of the European Parliament and of the Council with regard to Eco-design Requirements. e .b re or nb de an .v w 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih Taipei Hsien 221, Taiwan nl ow D d de oa m fro -. EN60950-1 -. EN62311 z Article 3.1(b) EMC -. EN301 489-1 -. EN301 489-17 z Article 3.2 Spectrum Usages -. EN300 328 -. EN301 893 (Applicable to 5GHz high performance RLAN). Year to begin affixing CE marking 2009. _______________________________ Easy Lai /Manager Regulation Center, Acer Inc. Aug. 15, 2009 Date - e .b z Article 3.1(a) Health and Safety re R&TTE Directive 1999/5/EC as attested by conformity with the following harmonized standard: or nb de an .v w w w The standards listed below are applied to the product if built with WLAN module or wireless keyboard and mouse.