Quick Start Guide & Installation manual
Guide de d’emarrage et Guide d’installation
Guía de inicio rápido y Manual de instalación
NX404
DVD MULTIMEDIA STATION WITH BUILT-IN NAVIGATION & 6.2” TOUCH PANEL CONTROL
Station multimédia DVD avec navigation intégrée et commande par écran tactile de 6.2 pouces
Estación multimedia DVD con navegación integrada y control de panel táctil de 6.2 pulgadas
Conformément à la réglementation d’Industrie Canada, le présent émetteur radio
peut
fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé
pour
l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique
à l’intention des autres utilisateurs, il faut choisir le type d’antenne et son gain de
sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l’intensité nécessaire à l’établissement d’une communication satisfaisante.
Quick start guide
Dear Customer:
Congratulations on your purchase of a Clarion mobile electronic product. We are
confident that you’ll enjoy your Clarion experience.
There are many benefits to registering your product. We invite you to visit our
website at www.clarion.com to register your Clarion product.
We have made product registration simple with our easy to use website.
The registration form is short and easy to complete. Once you’re registered, we
can keep you informed of important product information.
Register at www.clarion.com - it’s easy to keep your Clarion product up to date.
English
For USA and Canada only
www.clarion.com
Under Industry Canada regulations, this radio transmitter may only operate using
an antenna of a type and maximum (or lesser) gain approved for the transmitter by
Industry Canada. To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for successful communication.
English
CLARION PRODUCT REGISTRATION INFORMATION
INFORMATIONS DE L’ENREGISTREMENT DE PRODUITS CLARION
Pour les Étas Unis et le Canada seulement
www.clarion.com
Cher client:
Nous vous remercions d’avoir acheté ce produit électronique mobile Clarion.
Nous sommes confiants que vous apprécierez votre expérience Clarion.
Il y a beaucoup d’avantage à enregistrer votre produits. Nous vous invitons à
visiter notre site Web www.clarion.com pour enregistrer votre produit Clarion.
Nous avons facilité la tache d’enregistrement de produit simple et facile grâce
à notre site Web.Le formulaire d’enregistrement est court et facile à compléter.
Lorsque vous êtes enregistrer, nous pouvons vous tenir informé des informations
important de produits. Enregistrer à www.clarion.com - c’est facile de mettre à
jour votre produit Clarion.
INFORMACIÓN DEL REGISTRO DE PRODUCT O DE CLARION
Para USA y Canada nomas
www.clarion.com
Querido Cliente:
Felicitaciones por su compra de producto electrónico móvil de Clarion. Estamos
seguros que usted gozará de su experiencia con el producto de Clarion.
Hay muchas ventajas al registrar su producto. Le invitamos a que visite nuestro
sitio en internet www.clarion.com para registrar su producto de Clarion.
Hemos hecho el registro de producto fácil en nuestro sitio. La forma de registro
es corta y fácil de completar. Una vez que lo registre, podremos proporcionarle la
información de su producto.
Registrese en www.clarion.com - es fácil mantener su producto de Clarion
actualizado.
NX404
1
Contents
English
1. PRECAUTIONS ............................................................................3
INFORMATION FOR USERS: .........................................................4
2.OPERATIONAL PANEL ................................................................6
Functions of Buttons.....................................................................6
3. TURNING THE POWER ON ........................................................7
4. MAIN MENU.................................................................................7
5. DVD VIDEO PLAYER OPERATIONS .........................................8
Operate the DVD Player Menu ......................................................9
6. CD PLAYER OPERATIONS......................................................10
Listening to a Disc/Ejecting a Disc .............................................10
Showing CD Player Mode Screen ..............................................10
7. USB AUDIO OPERATIONS ......................................................11
8. USB VIDEO OPERATIONS........................................................12
9. iPod/iPhone OPERATIONS ......................................................13
iPod Audio ID3 Information .........................................................13
iPod Audio Playlist Mode Screen ...............................................13
iPod Video ID3 Mode Screen......................................................14
iPod Video Play Mode Screen ....................................................14
®
10. Pandora OPERATIONS .........................................................15
Selecting the Pandora Mode ......................................................15
Selecting the Bluetooth Audio Mode ..........................................16
Bluetooth Audio Player Settings .................................................16
®
11. Bluetooth AUDIO PLAYER OPERATIONS ...........................16
Pandora Bluetooth Mode............................................................16
Registering your Bluetooth Audio Player (Pairing) ......................17
Selecting the Bluetooth Audio Player .........................................18
Controlling the Bluetooth Audio Player.......................................18
Select the BT Phone Mode .........................................................19
Bluetooth Telephone Settings ....................................................19
®
12. Bluetooth TELEPHONE OPERATIONS ................................. 19
Registering Your Cellular Phone (Pairing) ...................................20
Select the Cellular Phone............................................................21
Obtaining the Phone Book Data .................................................21
Telephone Operations ................................................................21
13. TUNER OPERATIONS .............................................................22
Quick start guide
2
NX404
14. START USING Clarion MOBILE MAP...................................... 23
INSTALLATION .............................................................................27
1. Before Starting ........................................................................27
2. Package Contents ..................................................................27
3. General Cautions ....................................................................27
4. Cautions on Installation ..........................................................27
5. Installing the Main Unit ...........................................................28
Wire Connections .........................................................................29
Installing The GPS Antenna ....................................................... 30
t 'PSZPVSTBGFUZUIFESJWFSTIPVMEOPUXBUDIBOZWJEFPTPVSDFTBOEPSPQFSBUF
the controls while driving. Please note that watching and operating any video
sources while driving are prohibited by law in some countries. Also, while
driving, keep the volume to a level at which external sounds can be heard.
t "TUIFESJWFSZPVBMPOFBSFSFTQPOTJCMFGPSZPVSESJWJOHTBGFUZ
t*OPSEFSUPBWPJEBUSBGmDBDDJEFOUEPOPUPQFSBUFUIFTZTUFNXIJMF
driving.
t*OPSEFSUPBWPJEBUSBGmDBDDJEFOUPQFSBUFUIFTZTUFNPOMZXIFOUIF
vehicle is stopped at a safe place and the parking brake is on.
t %POPUVTFUIJTVOJUXIFOBUSPVCMFFYJTUTTVDIBTOPTDSFFODPOUFOU
appears or no sound is audible. It may cause an accident, fire, or
electric shock. For that case, consult your authorized dealer or a
nearest Clarion service center.
t*OPSEFSUPBWPJEBUSBGmDBDDJEFOUPSUSBGmDPGGFOTFSFNFNCFSUIBU
actual road conditions and traffic regulations take precedence over the
information contained on the navigation system.
t 6TFBGVTFXJUIUIFTBNFTQFDJmDBUJPOPOMZXIFOSFQMBDJOHUIFGVTF
Using a fuse with a different specification may causes a fire.
t 'PSUIFJOTUBMMBUJPOPGUIJTVOJUPSBDIBOHFJOUIFJOTUBMMBUJPOBTL
your authorized dealer or a nearest Clarion service center for safety.
Professional skills and experiences are required to do so.
t 5IJTOBWJHBUJPOTZTUFNTIPVMEOPUCFVTFEUPSFQMBDFZPVSPXO
judgment. No itinerary suggested by this navigation system should ever
override any highway regulations, your own judgment, or a knowledge
of safe driving practices. Do not follow the navigation system’s
suggested itinerary if it would cause you to perform a dangerous or
illegal act, place you in a dangerous situation, or take you into an area
you consider unsafe.
t 5IFBEWJDFQSPWJEFECZUIFOBWJHBUJPOTZTUFNJTUPCFSFHBSEFEBT
a suggestion only. There may be times when the navigation system
displays the vehicle’s location incorrectly, fails to suggest the shortest
route, or fails to direct you to your desired destination. In such
t5IFTPGUXBSFNBZDPOUBJOJOBDDVSBUFPSJODPNQMFUFJOGPSNBUJPOEVF
to the passage of time, changing circumstances, and the sources
of information used. Please respect current traffic conditions and
regulations at all times while driving.
t8IFSFBDUVBMSPBEDPOEJUJPOTBOEIJHIXBZSFHVMBUJPOTEJGGFSGSPNUIF
information contained on the navigation system, abide by the highway
regulations.
t,FFQUIFBNPVOUPGUJNFTQFOUWJFXJOHUIFTDSFFOXIJMFESJWJOHUPB
strict minimum.
t5IFOBWJHBUJPOTZTUFNEPFTOPUQSPWJEFOPSSFQSFTFOUJOBOZXBZ
information on: traffic and highway regulations; technical aspects
of the vehicle including weight, height, width, load and speed limits;
road conditions including grade, percentage of incline and surface
conditions; obstacles such as the height and width of bridges and
tunnels; and other current driving or road conditions. Always rely on
your own judgment when driving a car, taking into account current
driving conditions.
t5IJTFRVJQNFOUIBTCFFOUFTUFEBOEGPVOEUPDPNQMZXJUIUIFMJNJUT
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
NX404
3
Quick start guide
t %POPUEJTBTTFNCMFPSNPEJGZUIJTVOJU*UNBZDBVTFBOBDDJEFOUmSF
or electric shock.
t *ODBTFPGBQSPCMFNTVDIBTBOZNBUFSJBMIBTCFFOFOUFSFEJOUIF
unit, the unit gets wet, or smoke or strange smells come out of the
unit, etc., stop using this unit immediately, and consult your authorized
dealer or a nearest Clarion service center.
Using it in that condition may cause an accident, fire, or electric shock.
English
WARNING
t %POPUVTFUIFOBWJHBUJPOTZTUFNUPMPDBUFFNFSHFODZTFSWJDFT5IF
database does not contain a complete listing of emergency services
such as police stations, fire halls, hospitals and walk-in clinics. Please
show discretion and ask for directions in such instances.
English
1. PRECAUTIONS
instances, rely on your own driving judgment, taking into account the
driving conditions at the time.
English
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio reception,
which can be determined by turning the equipment off and on, the user
is encourage to consult the dealer or an experienced radio technician
for help.
V8VCNE8239DCL
8614A-CNE8239DCL
5 B
Quick start guide
1.When the inside of the car is very cold and the player is used
soon after switching on the heater, moisture may form on the disc
(DVD/ CD) or the optical parts of the player and proper playback
may not be possible. If moisture forms on the disc (DVD/CD), wipe
ÁÌÇŰÏÁÌÀ¹ËǾ̻ÄÇÌÀƖ¾ÅÇÁËÌÍʽ¾ÇÊÅËÇÆÌÀ½ÇÈÌÁ»¹ÄȹÊÌËǾÌÀ½
player, do not use the player for about one hour. The condensation
will disappear naturally allowing normal operation.
2.Driving on extremely bumpy roads which
cause severe vibration may cause the sound
to skip.
3.This unit uses a precision mechanism. Even
in the event that trouble arises, never open
the case, disassemble the unit, or lubricate
the rotating parts.
INFORMATION FOR USERS:
À¹Æ¿½ËÇÊÅǼÁŲ»¹ÌÁÇÆËÌÇÌÀÁËÈÊǼͻÌÍƹÈÈÊÇν¼ºÑÌÀ½
manufacturer will void the warranty and will violate FCC approval.
4
NX404
NX404
ƹ “Made for iPod,” and “Made for iPhone” mean that an electronic accessory
has been designed to connect specifically to iPod, or iPhone, respectively, and
has been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with
safety and regulatory standards. Please note that the use of this accessory
with iPod or iPhone may affect wireless performance.
iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and
other countries.
ƹ The Bluetooth® word mark and logos are registered trademarks owned by
the Bluetooth® SIG, Inc. And any use of such marks by Clarion Co.,Ltd. is
under license. Other trademarks and trade names are those of their respective
owners.
ƹ Pandora. the Pandora logo. and the Pandora trade dress are trademarks or
registered trademarks of Pandora Media. Inc. used with permission.
NX404
5
Quick start guide
ƹ Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories.
English
ƹ This product incorporates copyright protection technology that is protected
by U.S. patents and other intellectual property rights. Use of this copyright
protection technology must be authorized by Rovi Corporation, and is intended
for home and other limited viewing uses only unless otherwise authorized by
Rovi Corporation.
Reverse engineering or disassembly is prohibited.
ƹ DivX®, DivX Certified® and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license. DivX
Certified® to play DivX® video, including premium content. Covered
by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274
ABOUT DivX VIDEO: DivX® is a digital video format created by DivX,
LLC, a subsidiary of Rovi Corporation.
This is an official DivX Certified® device that has passed rigorous
testing to verify that it plays DivX video. Visit divx.com for more
information and software tools to convert your files into DivX videos.
ABOUT DivX VIDEO-ON-DEMAND: This DivX Certified® device must
be registered in order to play purchased DivX Video-on-Demand (VOD)
movies To obtain your registration code, locate the DivX VOD section
in your device setup menu. Go to vod.divx.com for more information
on how to complete your registration.
English
About the registered marks, etc.
2.OPERATIONAL PANEL
English
[Microphone]
[MENU]
[NAVI/AV]
]
[
[Disc slot]
Quick start guide
[POWER/VOL]
[IR]
[RESET]
[microSD slot]
[Cover]
[AUX IN]
Only navigation map card is available and don’t remove it when unit is power on
Functions of Buttons
[POWER/VOL] Knob
s0RESSTHISKNOBTOTURNONTHEPOWER
s7HENTHEPOWERISALREADYONITMOVESTOTHE.AVIGATIONMODE)F.AVIGATION
MODEISDISPLAYEDITMOVESTOTHE.AVIGATIONMENU
s+EEPPRESSINGTHISKNOBMORETHANSECONDTOTURNOFFTHEPOWER
s4URNTHISKNOBTOLEFTORRIGHTTODECREASEORINCREASETHEVOLUMEOFTHESYSTEM
[NAVI/AV]"UTTON
s0RESSTHISBUTTONTODISPLAY.!6)PRESSAGAINTORETURNCURRENTSOURCE
s0RESSANDHOLDTHISBUTTONFORSECONDSTODISPLAYTHE$IMMERSETTINGMENU
[ ]%JECT
s0RESSTOEJECTDISCFROMUNIT
[MENU]"UTTON
s0RESSTHISBUTTONTODISPLAYMAINMENUPRESSAGAINTORETURNCURRENTSOURCE
s0RESSANDHOLDTHISBUTTONFORSECONDSTOTURNOFFTHEMONITOR0RESSANYPLACE
OFTHESCREENTOTURNONTHEMONITORAGAIN
6
NX404
3. TURNING THE POWER ON
English
Note: When the [RESET] button is pressed, frequencies of radio stations, titles, etc.
stored in memory are cleared.
English
[RESET]"UTTON
s 0RESSTHISBUTTONTOHARDWARERESETTHEUNIT
3TARTTHEENGINE4HEPOWERIS
SUPPLIEDTOTHISUNIT
[microSD slot ]
)NSERTAMICRO3$#ARDFOR-!0HERE4HEMICRO3$CARDFOR-!0ISSOLDSEPARATELY
.OTE4HEMICRO3$CARDISONLYFORNAVIGATION0LEASEDONTINSERTMICRO3$CARDFOR
OTHERPURPOSE!FTERINSERTIONOFMICRO3$CARDFOR-!0DONTREMOVEITOTHERWISE
THENAVIGATIONFUNCTIONWILLBEDISABLED
VOL/PWR
[AUX IN]
!58#ONNECTOR
Quick start guide
0RESS[POWER]BUTTONONTHE
PANELTOTURNONTHEUNIT
[Microphone]
4HISISUSEDFOR"LUETOOTHPHONE
[IR]3%.3/2
s2ECEIVERFORTHEREMOTECONTROLUNITOPERATINGRANGEDEGREEINALLDIRECTIONS
Selecting a Source
s0RESS[MENU]BUTTONONTHE0!.%,TOSHOWMAINSOURCEMENU
s#HANGEPAGEBYDRAGGINGLEFTORRIGHTORTOUCHINGOTHERBUTTONS
s4OUCHTHEICONSONTHESCREENTOENTERCORRESPONDINGWORKMODESUCHAS$ISC
MODE4UNERMODE4ELEPHONEMODEETC
NX404
7
4. MAIN MENU
English
1
3
4
5
6
7
8
9
Quick start guide
2
4UNER4OUCHTHEBUTTONTODISPLAYTHE4UNERMODE
0ANDORA4OUCHTHEBUTTONTODISPLAYTHE0ANDORAMODE
"LUETOOTH!UDIO4OUCHTHEBUTTONTODISPLAYTHE"LUETOOTH!UDIOMODE
$ISC!UDIO4OUCHTHEBUTTONTODISPLAYTHE$ISC!UDIOMODE
I0OD!UDIO4OUCHTHEBUTTONTODISPLAYTHEI0OD!UDIOMODE
.AVIGATION4OUCHTHEBUTTONTODISPLAYTHE.AVIGATIONMODE
7 - .*3/4OUCHTHEBUTTONTODISPLAYTHE($-)MODE
53"!UDIO4OUCHTHEBUTTONTODISPLAYTHE53"!UDIOMODE
!584OUCHTHEBUTTONTODISPLAYTHE!58MODE
$ISC6IDEO4OUCHTHEBUTTONTODISPLAYTHE$ISC6IDEOMODE
53"6IDEO4OUCHTHEBUTTONTODISPLAYTHE53"6IDEOMODE
I0OD6IDEO4OUCHTHEBUTTONTODISPLAYTHEI0OD6IDEOMODE
4ELEPHONE4OUCHTHEBUTTONTODISPLAYTHE4ELEPHONEMODE
#AMERA4OUCHTHEBUTTONTODISPLAYTHE#AMERAMODE
!584OUCHTHEBUTTONTODISPLAYTHE!58MODE
3ETTING"UTTON4OUCHTHEBUTTONTODISPLAYTHE3ETTINGMENU
!UDIOOFF4OUCHTHEBUTTONTOMAKEAUDIOSOURCEVOICEOFF
18 - 8KGX4OUCHTHEBUTTONTODISPLAYTHE8KGXMODE
Scrolling the menu
Flicking to right or left it will switch to next or previous page of main menu.
11
12
13
14
15
16
8
NX404
17
18
Moving the menu position
1. 4OUCH any quadrate icon on main menu more than 2 seconds, the icon will float
on main menu.
2. Scrolling the floating icon to any position you want.
!FTERDISCISLOADEDTHEPLAYMODEISAUTOMATICALLYENGAGED
4OUCHANYPLACEOFTHESCREENTODISPLAY$6$6IDEOMENUTOUCHTHESCREENAGAIN
TORETURNTHEPLAYBACKSCREEN4HEDISPLAYWILLRETURNTOTHEPLAYBACKSCREENIFYOU
DONOTTOUCHTHESCREENFORSECONDS
3
2
4
5
6
7
8
9
Quick start guide
1
11
12
English
Showing DVD Player Mode Screen
English
5. DVD VIDEO PLAYER OPERATIONS
/PTIONBUTTON
3HOW#URSORKEYSBUTTON
0REVIOUS#HAPTER&AST"ACKWARDBUTTON
0LAY0AUSEBUTTON
.EXT#HAPTER&AST&ORWARDBUTTON
%LAPSEDPLAYINGTIME
3EEKBAR
4OTALTIME
-ENU,ISTBUTTON
3YSTEMTIME
"LUETOOTHSTATUSINDICATOR
$6$PLAYBACKINFORMATION
3HORTCUTBUTTON
2EPEAT3WITCHINGBUTTON
!UDIO#HANNELSWITCHINGBUTTON
3UBTITLESWITCHINGBUTTON
)NFORMATIONBUTTON
$IRECTCHAPTERORTITLESEARCHINGBUTTON
Operate the DVD Player Menu
Using the Title Menu
/N$6$DISCSCONTAININGTWOORMORETITLESYOUCANSELECTFROMTHETITLEMENUFOR
PLAYBACK
13
14
15
16
17
18
3HOWINGTHE$6$6IDEOMENUTOUCH[
]BUTTONDURINGPLAYBACK
$EPENDINGONTHEDISCTHETITLEMENUMAYNOTBECALLED
NX404
9
English
4OUCHTHETITLEMENUSCREEN!NDTOUCHTHE3HOW#URSORBUTTON
DIRECTIONALBUTTONS
3ELECTTHEITEMSINTHETITLEMENUSCREENBY
$EPENDINGONTHEDISCITEMSMAYNOTBESELECTEDWITHTHEDIRECTIONALBUTTONS
]BUTTONTOlXONTHESELECTEDITEM
4OUCH[
]BUTTON
4OUCH[
Showing Video Files Player Mode Screen
8
9
Quick start guide
2
3
4
5
Showing CD Player Mode Screen
!FTERDISCISLOADEDTHEPLAYMODEISAUTOMATICALLYENGAGED
)FDISCHAVEBEENLOADEDYOUCANTOUCH[Disc Audio]BUTTONONMAINMENUTO
DISPLAY#$PLAYERMODESCREEN
7
/PTIONBUTTON
0REVIOUS4RACK&AST"ACKWARD
BUTTON
0LAY0AUSEBUTTON
.EXT4RACK&AST&ORWARDBUTTON
%LAPSEDPLAYINGTIME3EEKBAR
,IST-ODEBUTTON
3YSTEMTIME
"LUETOOTHSTATUSINDICATOR
0LAYBACKINFORMATION
1
6. CD PLAYER OPERATIONS
6
8
5
7
4
9
12
1
6
11
2
3
16
3HORTCUTBUTTON
2EPEATBUTTON
!UDIOBUTTON
3UBTITLEBUTTON
13
14
15
11
12
13
18
/PTIONBUTTON
%LAPSEDPLAYINGTIMEINDICATOR
2OTATIONEFFECT
0AGETURNINGBUTTON
3YSTEMTIME
NX404
17
"LUETOOTHSTATUSINDICATOR
2EPEATBUTTON
0REVIOUS4RACK&AST"ACKWARDBUTTON
3HORTCUTBUTTON
0LAY0AUSEBUTTON
.EXT4RACK&AST&ORWARDBUTTON
3HUFmEBUTTON
$IRECT3EARCHINGBUTTON
3CAN3TART3TOPBUTTON
2OTATION%FFECT/N/FFBUTTON
3ONGTITLE
!RTISTALBUMINFORMATION
#LOSEOPTIONMENUBUTTON
English
4HISSYSTEMCANPLAYAUDIOlLES-07-!!!#&,!#STOREDINAN53"MEMORY
WHICHISRECOGNIZEDASh53"-ASS3TORAGE#LASSDEVICEv9OUCANUSEYOUR53"
MEMORYASANAUDIODEVICEBYSIMPLYCOPYINGDESIREDAUDIOlLESINTOIT
English
7. USB AUDIO OPERATIONS
Note:
s4HISSYSTEMWILLNOTOPERATEORMAYOPERATEIMPROPERLYWITHSOME53"MEMORY
s&ILESPROTECTEDWITHANY$2-CANNOTBEPLAYED
11
Quick start guide
12
13
Playback MP3/WMA/AAC Menu
1
14
15
16
17
9
1
3
2
2EPEAT0LAYBACK
7HILEPLAYING-07-!!!#TOUCH BUTTONCANSWITCHBETWEEN2EPEAT&OLDER
2EPEAT!LLAND2EPEAT4RACK2EPEAT&OLDERAND2EPEAT!LL
#URRENT&OLDER
s3HOWINGTITLEOFCURRENTFOLDER
s4HENUMBERONTHEFOLDERSYMBOLISTHENUMBEROFlLESANDFOLDERSNUMBERIN
CURRENTFOLDER
s4OUCHTHETITLEOFCURRENTFOLDERPLAYLISTWILLSHOWlLESANDFOLDERSINUPPERFOLDER
2
5
6
4
7
8
18
19
/PTIONBUTTON
0LAY0AUSEBUTTON
0REVIOUS4RACK&AST"ACKWARDBUTTON
.EXT4RACK&AST&ORWARDBUTTON
NX404
11
English
Quick start guide
2EPEATBUTTON
3HUFmEBUTTON
-0lLES7-!lLESINLIST
&OLDERSINLIST
0AGETURNINGBUTTON
3YSTEMTIME
"LUETOOTHSTATUSINDICATOR
-UTESTATUSINDICATOR
0LAYBACKSTATUSINFORMATION
!LBUMART
3HORTCUTBUTTON
#URRENT)$INFOAREA
%LAPSEDPLAYINGTIMEINDICATOR3EEKBAR
$IRECTBUTTON
3CANBUTTON
8. USB VIDEO OPERATIONS
4HISSYSTEMCANPLAY53"VIDEOlLES-0'0ETCSTOREDINAN53"MEMORY
WHICHISRECOGNIZEDASh53"-ASS3TORAGE#LASSDEVICEv9OUCANUSEYOUR53"
MEMORYASANAUDIODEVICEBYSIMPLYCOPYINGDESIREDAUDIOlLESINTOIT
Note:
s 4HISSYSTEMWILLNOTOPERATEORMAYOPERATEIMPROPERLYWITHSOME53"MEMORY
s &ILESPROTECTEDWITHANY$2-CANNOTBEPLAYED
8
9
7
1
2
3
4
0REVIOUS4RACK&AST"ACKWARDBUTTON
0LAY0AUSEBUTTON
.EXT4RACK&AST&ORWARDBUTTON
%LAPSEDPLAYINGTIMEINDICATOR3EEKBAR
-ENULIST
2EPEATBUTTON
3YSTEMTIME
"LUETOOTHSTATUSINDICATOR
0LAYBACKINFORMATION
3HORTCUTBUTTON
12
NX404
5
6
®
®
#ONNECTYOURI0OD I0HONE TOTHE53"CONNECTOR4HESYSTEMWILLAUTOMATICALLY
DETECTTHECONNECTEDDEVICEANDTHEI0OD!UDIOBUTTONWILLBEENABLEDFOR
OPERATIONONTHE-AIN-ENUSCREEN
English
iPod Audio Menu Operations
English
9. iPod/iPhone OPERATIONS
"LUETOOTHSTATUSINDICATOR
0LAYBACKSTATUSINDICATOR
!RTWORK
3HORTCUTBUTTON
0ROGRESSBAR
iPod Audio Playlist Mode Screen
Note:
4HISSYSTEMHASTWO53"CONNECTORSPLEASECONNECTTOTHE53"WITHTHELABELOF
hI0ODI0HONEv"YCONNECTINGANOTHER53"CABLEI0ODI0HONECANTPLAYBACKTHE
music.
1
Quick start guide
iPod Audio ID3 Mode Screen
12
11
13
9
14
2
3
15
3WITCHTOINFORMATIONBUTTON
0LAYINGLIST
0AGETURNINGBUTTON
4
2 5 3
6
/PTIONBUTTON 1
2EPEATBUTTON
3HUFmEBUTTON
0REVIOUS4RACK&AST"ACKWARDBUTTON
0LAY0AUSEBUTTON
.EXT4RACK&AST&ORWARDBUTTON
)$INFORMATION
.EXT0AGE;
#ATEGORYLIST
3YSTEMTIME
=0REVIOUS0AGE;
7
4
5
8
=BUTTON
6
"ACKTOFATHERFOLDER
NX404
13
#LOSETHELISTMODE
3EARCHWITHTHElRSTALPHABETINCURRENTLIST
iPod Video Play Mode Screen
9
8
7
English
iPod Video ID3 Mode Screen
11
9
12
7
Quick start guide
13
14
3
1
1
2
4
6
5
/PTIONBUTTON
2EPEATBUTTON
0REVIOUSTRACKBUTTON
0LAY0AUSEBUTTON
.EXTTRACKBUTTON
0LAYINGlLETITLE
#ATEGORYLIST
=0REVIOUS0AGE;
.EXT0AGE;
3YSTEMTIME
"LUETOOTHSTATUSINDICATOR
0LAYBACKSTATUSINDICATOR
!RTWORK
3HORTCUTBUTTON
0ROGRESSBAR
14
NX404
=BUTTON
8
2
3
4
0REVIOUS4RACK&AST"ACKWARDBUTTON
0LAY0AUSEBUTTON
.EXT4RACK&AST&ORWARDBUTTON
0ROGRESSBAR
-ENULISTBUTTON
2EPEATBUTTON
3YSTEMTIME
"LUETOOTHSTATUSINDICATOR
0LAYBACKINFORMATION
5
6
Selecting the Pandora Mode
2
Quick start guide
4URNON0ANDORAFUNCTIONOFYOURI0OD
#ONNECTYOURI0ODTOTHEUNIT
7HENI0ODI0HONEISALREADYCONNECTEDTOUCHTHE
;0ANDORA=ICONONTHE-AIN-ENUSCREEN
s0ANDORAMODE)$)NFORMATION3CREEN
English
If you have any issues with the Pandora application on your mobile phone, please direct them to
pandora-support@pandora.com.
,ISTBUTTON
4OUCHTHISBUTTONTOSHOWLISTSCREEN
#URRENTSTATIONNAME
#URRENTTITLE
4OUCHICONTOSTORECURRENTTITLETOTRACKFAVORITESLIST
#URRENTARTIST
4OUCHICONTOSTORECURRENTARTISTTOARTISTFAVORITESLIST
#URRENTALBUMNAME
1
English
10. Pandora OPERATIONS
®
8
3
9
1
11
12
2
13
3
4
5
6
7
!RTWORK
0ROGRESSBAR
3ETTINGSBUTTON
4HUMBSDOWN
4OUCHTHISBUTTON4HUMBSDOWNCURRENTTRACKANDPLAYNEXTTRACK
0LAY0AUSEBUTTON
5SETOCONTROLPLAYBACKANDPAUSE
4OUCHTHEBUTTONDURINGPLAYBACK0LAYBACKPAUSES
4ORESUMEPLAYBACKTOUCHTHEKEYAGAIN
.EXTTRACKBUTTON
4HUMBSUP
3YSTEMTIME
;
=BUTTON
4OUCHTHISBUTTONTODISPLAY)$)NFORMATION3CREEN
;
=BUTTON
4OUCHTHISBUTTONTOSORTTHELISTBYlRSTLETTERTOUCHAGAINTOSORTTHELISTBYDATE
3TATIONLISTTOUCHTOSELECTSTATIONPLAY
7HENTHEDESIREDSTATIONISNOTDISPLAYEDTOUCHAND
mICKTHESTATIONLISTUPORDOWN
s0ANDORAMODE3ETTINGSCREEN
1
2
3
NX404
15
English
!DDANEW3TATION
3ELECTADEVICE
#LOSETHESETTINGSCREEN
Pandora Bluetooth Mode
When your mobile phone have connected to the unit via bluetooth. You can also
enter the Pandora mode. The OPERATIONISSAMEASTHENORMALPandora MODE
®
11. Bluetooth AUDIO PLAYER OPERATIONS
3OME"LUETOOTHCELLULARPHONESHAVEAUDIOFEATURESANDSOMEPORTABLEAUDIO
PLAYERSSUPPORTTHE"LUETOOTHFEATURE4HESEDEVICESWILLBECALLEDASh"LUETOOTH
AUDIOPLAYERSvINTHISMANUAL4HISSYSTEMCANPLAYAUDIODATASTOREDINA
"LUETOOTHAUDIOPLAYER
Note:
s4HISSYSTEMWILLNOTOPERATEORMAYOPERATEIMPROPERLYWITHSOME"LUETOOTHAUDIO
players.
Quick start guide
s&ORDETAILEDINFORMATIONONTHEPLAYABLE"LUETOOTHAUDIOPLAYERSSEEOURHOME
page: www.clarion.com
Selecting the Bluetooth Audio Mode
1
4OUCHTHE;"LUETOOTH!UDIO=KEYTOSELECTTHE"LUETOOTH!UDIOMODE
4HESYSTEMCHANGESTOTHE"LUETOOTHMODE)FTHECONNECTIONWITHA"LUETOOTH
AUDIOPLAYERHASBEENALREADYESTABLISHEDYOUMAYSELECTTHE-USICFUNCTION
0RESS-%.5BUTTONON/PERATIONAL0ANELTORETURNTOTHE-AIN-ENU
s 7HENTHECONNECTIONWITHBLUEICONA"LUETOOTHAUDIOPLAYERHASBEEN
ESTABLISHEDTHE[ ]ICONISDISPLAYEDATTHETOPOFTHESCREEN
"4MODE
7HENCONNECTEDVIABLUETOOTH4HISICONWILLCHANGEFROM53"TO"4
Bluetooth Audio Player Settings
9OUCANCONlRMVARIOUSINFORMATIONCONCERNINGABOUTTHE"LUETOOTH)NTERFACE
FEATURES
4OUCHTHE[ ]BUTTONTODISPLAYTHEINFORMATIONONTHESCREEN
7HENYOUlNISHCONlRMINGTHE"LUETOOTHINFORMATIONTOUCHTHE[ ]BUTTONTO
RETURNTOTHEPREVIOUSSCREEN
16
NX404
English
English
You can register up to 5 Bluetooth audio players.
1. Turn on the power of the Bluetooth audio player you wish to register.
2. Touch the Device button [ ] to display the Device Select screen.
4. Touch your desired device button and touch [
] button to register for the
Bluetooth audio player. Then select an image of this device.
And select a type of this device.
3. Touch the [
] button to display the Inquiring Device screen.
When the pairing operation completes, the registered Bluetooth audio player is
set as the current device, after selecting the favorite icon, the display return to
the device list screen. Touch [
] button, the display will return to the Bluetooth
audio mode screen.
NX404
17
Quick start guide
Registering your Bluetooth Audio Player (Pairing)
or switch noises may be generated.
Playing Music
English
!FTERTHECONNECTIONWITHA"LUETOOTHAUDIOPLAYERISESTABLISHEDTHEPLAYMODEIS
AUTOMATICALLYENGAGED
s 7HENPLAYBACKISNOTSTARTEDFORSOMEDEVICESTOUCHTHE[
]BUTTON
MANUALLY
Pausing Playback
4OUCHTHE[
]BUTTONDURINGPLAYBACK
Playback Pauses.
Quick start guide
s4ODELETETHE"LUETOOTHAUDIOPLAYERREGISTRATION
=BUTTONTODELETETHEDEVICE
4OUCHTHE;
!CONlRMATIONSCREENISDISPLAYED
=BUTTONTOCONlRMDELETE
4OUCHTHE;
Selecting the Bluetooth Audio Player
4OCHANGETHECURRENT"LUETOOTHAUDIOPLAYERTOTHEOTHERDEVICEWHICHISALREADY
REGISTEREDPERFORMTHEFOLLOWINGOPERATION
4OUCHTHEDEVICEBUTTONTO[ ]DISPLAYTHE$EVICE3ELECTSCREEN
]BUTTONTO
4OUCHTHECURRENTLYCONNECTEDDEVICEBUTTONTHENTOUCHTHE[
DISCONNECTTHEACTIVEDEVICE
4OUCHTHEDESIRED$EVICEBUTTONYOUWISHTOUSE4OUCH[
]BUTTONTOSELECT
ITASYOURACTIVEDEVICE4HECORRESPONDINGCELLULARPHONEISSETASCURRENT
TELEPHONE
4OUCHTHE[
]BUTTONTORETURNTOTHEPREVIOUSSCREEN
Controlling the Bluetooth Audio Player
Note:
s/CCASIONALLYDEPENDINGONTHEENVIRONMENTPLAYBACKSOUNDSMAYBEFRAGMENTED
18
NX404
4ORESUMEPLAYBACKTOUCHTHE[
]BUTTON0LAYBACKRESUMES
Skipping a Track (searching)
4OUCHTHE[
]OR[
]BUTTONDURINGPLAYBACK
Stopping Playback
4OUCHTHE[
]BUTTONDURINGPLAYBACK
4RACKSARESTOPPEDTOUCHTHE[
]BUTTONTOPLAYBACKTHElRST4RACK
Show Track List
4OUCHTHE[
]BUTTONTOSHOWTHECURRENTTRACKLIST
4OUCHTHE[
]BUTTONTOSHOWALLOFTHELISTS!NDYOUCANPLAYBACKANYTRACKS
BYTOUCHTHEITEMSINTHELIST
®
s4HE0HONE"OOKDATATRANSMISSIONMAYTAKEALONGTIME4HEOPERATIONSOFSENDING
calls are disabled during the data transmission.
Select the BT Phone Mode
Bluetooth Telephone Settings
9OUCANCONlRMVARIOUSINFORMATIONCONCERNINGABOUTTHE"LUETOOTH)NTERFACE
FEATURES
4OUCHTHE[
]BUTTONTODISPLAYTHEINFORMATIONONTHESCREEN
0ERFORMSETTINGFORTHEDESIREDITEM3EETHEFOLLOWINGSECTIONSFORDETAIL
]BUTTONTO
7HENYOUlNISHCONlRMINGTHE"LUETOOTHINFORMATIONTOUCHTHE[
RETURNTOTHEPREVIOUSSCREEN
4OUCHTHE;"LUETOOTH4ELEPHONE=BUTTONTOSELECTTHE"LUETOOTH4ELEPHONEMODE
4HE4ELEPHONESCREENISDISPLAYED
0RESS-%.5BUTTONON/PERATIONAL0ANELTORETURNTOTHEMAINMENU
s 7HENNO"LUETOOTH4ELEPHONECONNECTEDTHEICON
[ ]ISDISPLAYEDATTHETOPOFTHESCREEN
s 7HENTHECONNECTIONWITHA"LUETOOTH4ELEPHONEHASBEENESTABLISHEDTHEICON
[ ]ANDSIGNALLEVELINDICATORAREDISPLAYEDATTHETOPOFTHESCREEN
3ETTING!UTOMATIC#ONNECTION
4HESYSTEMAUTOMATICALLYRECONNECTSTHECELLULARPHONEAFTERTHECONNECTIONISLOST
ORTHESYSTEMISRESTARTED
s 4HEFACTORYDEFAULTSETTINGISh/.v4OUCHTHE
[
]OR[
]BUTTONOFTHE!UTOMATIC#ONNECTIONITEMTOSETTHEFUNCTION/.
OR/&&
.OTE4HEhAUTOCONNECTvISEFFECTIVETOTHECELLULARPHONEOFLASTCONNECTING
3ETTING!UTOMATIC!NSWER
)FACALLCOMESINANSWERAUTOMATICALLYAFTERSECONDS
NX404
19
Quick start guide
Note:
s3OMECELLULARPHONESMAYNOTBEABLETOTRANSFERTHE0HONE"OOKDATATOHEADUNIT
English
7HENTHECONNECTIONWITHYOUR"LUETOOTHCELLULARPHONEISESTABLISHEDTHE
FOLLOWINGFUNCTIONSAREAVAILABLEONTHISUNIT
s ,ISTENINGTOYOURTELEPHONECALLSONTHECARSPEAKERS
s !NSWERINGTOANINCOMINGCALL
s -AKINGACALLUSINGTHE4EN+EYPADSCREEN
s -AKINGACALLUSINGTHE0HONE"OOKDATAINTHESELECTEDCELLULARPHONE
s -AKINGACALLUSINGTHE(ISTORYDATAOFTHEDIALEDRECEIVEDCALLS
English
12. Bluetooth TELEPHONE OPERATIONS
s 4HEFACTORYDEFAULTSETTINGISh/&&v4OUCHTHE
[
]OR[
]BUTTONOFTHE!UTOMATIC!NSWERITEMTOSETTHEFUNCTION/.OR
/&&
English
3ETTING-ICROPHONE'AIN
9OUCANADJUSTTHEINPUTLEVELOFTHEMICROPHONEINLEVELS
s 4OUCHTHELEVELINDICATORBUTTONOFTHE-ICROPHONE'AINITEMTOADJUSTTHEINPUT
LEVEL
Registering Your Cellular Phone (Pairing)
9OUCANREGISTERUPTOCELLULARPHONES4HEREGISTERINGMETHODISASSAMEAS
h2EGISTERINGYOUR"LUETOOTHAUDIOPLAYERv
4URNONTHEPOWEROFTHECELLULARPHONEYOUWISHTOREGISTER
]TODISPLAYTHE$EVICE3ELECTSCREEN
4OUCHTHE$EVICEBUTTON[
Quick start guide
Note:
s4HEINPUTLEVELOFTHEMICROPHONECANBEAFFECTEDBYITSSURROUNDINGS!DJUSTTHE
level if the person on the other end of the telephone has a reception problem.
4OUCHTHE[
NX404
]BUTTONTODISPLAYTHE)NQUIRING$EVICESCREEN
Obtaining the Phone Book Data
English
s 4HECELLULARPHONEMAYPROMPTTOACKNOWLEDGETHE"LUETOOTHCONNECTIONORTO
ENTERTHE0ASS+EYCODEOFTHISUNIT0ERFORMTHESEOPERATIONSACCORDINGTOTHE
MESSAGEDISPLAYED
4OUCHTHE[
]BUTTONTORETURNTOTHEPREVIOUSSCREEN
English
4OUCHYOURDESIRED#ELLULARBUTTONTOSELECTTHEBUTTONFORTHECELLULARPHONETO
BEREGISTEREDANDTOUCH[
]BUTTONTOREGISTERFORTHE"LUETOOTHCELLULAR
PHONE
s 9OUCANNOTSELECTTHE#ELLULARBUTTONOFWHICHANOTHERCELLULARPHONEISALREADY
REGISTERED3ELECTABLANK#ELLULARBUTTON
)FENTERINGTHE0ASS+EYCODEISPROMPTEDONYOURCELLULARPHONEENTERTHE0ASS
+EYCODESETINTHISUNIT
s 9OUCANCHANGETHE0ASSKEYSETTINGOFTHISUNITFROMTHE"LUETOOTH)NFOSCREEN
UNDERTHE4ELEPHONE3ETTINGSSCREEN
3ENDINGTHE0HONE"OOKDATAFROMTHECELLULARPHONEENABLESYOUTOMAKEACALL
USINGTHE0HONE"OOKFUNCTIONFROMTHISUNIT
Telephone Operations
4OUCHTHE[ ]BUTTONTODISPLAYTHE4EN+EYPADSCREEN
%NTERTHETELEPHONENUMBERBYUSINGTHE4EN+EYPADDISPLAYEDONTHESCREEN
7HENTHEPAIRINGOPERATIONCOMPLETESTHEREGISTEREDCELLULARPHONEISSETAS
THECURRENTTELEPHONEANDTHEDISPLAYRETURNSTOTHE4ELEPHONESCREEN
s 4ODELETETHECELLULARPHONEREGISTRATION
=BUTTONTODELETETHEDEVICE!CONlRMATIONSCREENIS
4OUCHTHE;
DISPLAYED
4OUCHTHE;
=BUTTONTOCONlRMDELETE
Select the Cellular Phone
4OCHANGETHECURRENTCELLULARPHONETOTHEOTHERDEVICEWHICHISALREADY
REGISTEREDPERFORMTHEFOLLOWINGOPERATION
4OUCHTHE[ ]BUTTONTODISPLAYTHE$EVICE3ELECTSCREEN
4OUCHTHECURRENTLYCONNECTEDDEVICETHENTOUCH
[
]BUTTONTODISCONNECTTHEACTIVEDEVICE
]BUTTONTOSELECT
4OUCHTHEDESIRED$EVICEBUTTONYOUWISHTOUSE4OUCH[
ITASYOURACTIVEDEVICE4HECORRESPONDINGCELLULARPHONEISSETASTHECURRENT
TELEPHONE
s )FTHEPOWEROFTHECELLULARPHONEISNOTTURNEDONTURNITON
NX404
21
Quick start guide
Making a call using the Ten-Key pad
13. TUNER OPERATIONS
English
Listening to the Tuner
11
8
9
7
5
Auto Store
4HE!UTO3TOREISAFUNCTIONFORSTORINGUPTOSTATIONSTHATAREAUTOMATICALLY
SEARCHEDINSEQUENTIALLY)FTHENUMBEROFRECEIVABLESTATIONSCANNOTREACHTOTHE
PREVIOUSSTOREDSTATIONREMAINS
4OUCHTHE[FM1/2/3/AM]BUTTONTOSELECTTHEDESIREDBAND&-OR!-
4OUCHTHE[ ]BUTTONANDTHENPRESSTHE[
]BUTTONTOSTARTTHE!UTO3TORE
!BEEPSOUNDSANDTHESTATIONSWITHGOODRECEPTIONARESTOREDAUTOMATICALLYTOTHE
PRESETLIST
Quick start guide
Notes:
!FTERAUTOSTORETHEPREVIOUSSTOREDSTATIONSWILLBEOVERWRITTEN
4HEUNITHASBANDSBUT&-AND!-CANSTOREBY!3FUNCTION
12
6
4
13
0RESET3CANBUTTON
3EEKDOWN
3EEKUP
3TEPDOWN
3TEPUP
&REQUENCIESDISPLAY
3YSTEMTIME
"LUETOOTHSTATUSINDICATOR
0RESETLIST
$8,OCALINDICATOR
"ANDBUTTON
3HORTCUTBUTTON
/PTIONBUTTON
1
2
3
Preset Scan
4HE0RESET3CANRECEIVESTHESTATIONSSTOREDINTHEPRESETMEMORYINORDER4HIS
FUNCTIONISUSEFULWHENSEARCHINGFORTHEDESIREDSTATIONINMEMORY
4OUCHTHE;&-!-="UTTONTOSELECTTHEDESIREDBAND&-OR!-
]BUTTONTOSTARTTHE0RESET3CAN
4OUCHTHE[
4HEUNITSTARTSSCANNINGEACHSTATIONFORSECONDSSEQUENTIALLY"UTTHESTATION
STOREDISNOTAVALIDSTATIONTHESCANNINGTIMEISONLYSECONDS
7HENTHEDESIREDSTATIONISTUNEDINTOUCHTHE
[
]BUTTONAGAINTOSTAYINTHATSTATION
DX/Local Setting
4HE$8,OCALSETTINGCHANGESTHETUNERSENSITIVITYINORDERTOSEPARATECLOSELY
SPACEDSTATIONS4HISFEATUREISUSEFULINAREASTHATHAVEMANYRADIOSTATIONSIN
CLOSEPROXIMITY
22
NX404
4OENTERANADDRESSASTHEDESTINATIONDOASFOLLOWS
1. If you are on the Map screen, tap
to return to the Navigation menu.
2. In the Navigation menu, tap the following buttons:
3. Selecting a destination by entering the address or the postal code.
4. Selecting the destination from the Places of Interest.
5. Selecting a map location as the destination.
6. Selecting the destination from your Favorite.
7. Selecting your Home location.
8. Searching for a Place of Interest by its phone number.
9. Entering the coordinate of the destination.
10. Selecting a recent destination from the History.
11. Additional options.
Quick menu
20. The Quick menu is a selection of controls and functions that are frequently
needed during navigation. It can be opened directly from the Map screen by
tapping
21. If more drivers use Clarion Mobile Mapfor navigating, their settings can be
remembered by using one of the user profiles.
22. Find / Find Places /Quick Search (This function lets you search for a Place
along your route or around your current location if there is no route calculated).
23. Find / Favorite (This button opens the list of your Favorite destinations).
24. Find / History (This button opens the History list. You can select one of your
previous destinations).
25. More / Settings / Route Settings (This button opens the route related settings).
26. More / Settings / Map Settings (This button opens the map related settings).
27. Tap the Current Street field on the Map screen (This button opens a special
screen with information about the current position and a button to search for
nearby emergency or roadside assistance.
28. My Route / Cancel Route (This button cancels the route and stops navigation.
The button is replaced with the next one if waypoints are given).
t'PSUIFJOGPSNBUJPOBCPVUPUIFSXBZTTFFUIFVTFSNBOVBM
Map screen
12. To enlarge this small map and open the Map screen, tap [Show Map] button.
13. Zooming in and out.
14. Tilting up and down.
15. Rotating left and right.
16. 2D or 3D view.
17. Location information.
1
5.$JDPOJTOPUBWBJMBCMFPO/9
NX404
23
Quick start guide
Selecting the destination of a route
English
7HEN#LARION-OBILE-APISSTARTEDTHElRSTTIMEYOUNEEDTODOTHEFOLLOWING
1. Select the written language of the application interface. Later you can change it
in Settings.
2. Select the language and speaker used for voice guidance messages. Later you
can change it in Settings.
3. Read and accept the End User License Agreement.
4. Read and accept the road safety warning.
After this, the Navigation menu appears and you can start using Clarion Mobile
Map.
English
14. START USING Clarion MOBILE MAP
18. Return to normal navigation.
19. Select destination.
16
17
15
English
2
13
14
Quick start guide
12
18
NX404
19
3
4
5
6
21
22
23
24
7
8
9
25
26
27
28
11
24
11
WARNING
Installation Precautions
English
WARNING
English
Symbol Identification
This manual uses symbols and icons to indicate
safety precautions and concerns during the
installation procedure. Be sure to carefully read
and understand each precaution prior to
beginning the installation.
s7HENINSTALLINGTHEUNITTOAVEHICLEWITHANAIRBAGSYSTEMNEVERINSTALL
it in a place where it may affect the operation of the airbag.
s$ONOTINSTALLTHISUNITINTHEFOLLOWINGLOCATIONS
A location interfering with the driver’s visual range or operation.
A location where the gear shift or brake pedal are hindered.
A location where passengers are at risk.
An unstable location, or where the system may fall.
Quick start guide
This symbol is intended to alert the user to the presence of important
operating instructions. Failure to heed the instructions may result in
severe injury or death.
CAUTION
CAUTION
This symbol is intended to alert the user to the presence of important
operating instructions. Failure to heed the instructions can result in injury
or material damage.
s$ONOTINSTALLTHESYSTEMINTHELOCATIONSDESCRIBEDBELOW4HISMAY
CAUSEAlREACCIDENTORELECTRICALSHOCK
A location exposed to rain or dust.
An unstable location, or where the system may fall.
s$ONOTINSTALLTHISUNITINAPLACEEXPOSEDTODIRECTSUNLIGHTHEATORA
place where the vent holes or heat radiation holes are covered.
s7HENYOUINSTALLTHEANTENNAMOUNTITINAPLACEWHERETHEELEMENTSOF
the antenna do not protrude beyond the edge of the front, back, left and
right of the vehicle. If it comes in contact with pedestrians, it may
cause an accident.
WARNING
s#ONlRMTHEBATTERYVOLTAGEOFTHEVEHICLETOBEINSTALLED4HISUNITIS
designed only for vehicles with DC 12V power supply.
s$ISCONNECTTHENEGATIVETERMINALOFTHEBATTERYBEFORECONNECTING wires, otherwise an electric shock, injury by short circuit may occur.
NX404
25
Installation Notes
English
WARNING
s0LEASENOTETHEPOSITIONOFPIPESTANKSANDELECTRICALWIRINGSBEFORE
installing the unit into the vehicle; failure in avoiding these may cause a
lREORMALFUNCTION
Quick start guide
CAUTION
s5SEONLYTHESUPPLIEDPARTS
)FUNSPECIlEDPARTSAREUSEDTHEYMAYCAUSEDAMAGE
s!NYHOLESMADEINTHEBODYOFTHEVEHICLESHOULDBESEALEDWITHA silicon adhesive. If exhaust fumes or water penetrates into the vehicle,
this may cause an accident.
s&ASTENTHEBOLTSSECURELYWHENINSTALLINGTHEUNIT)FTHEBOLTSARELOOSE
an accident or malfunction could occur.
Connection Notes
WARNING
s,OOMALLCABLESACCORDINGTOTHEINSTRUCTIONMANUALSOASNOTTOHINDER
operation.
s7IRETHECONNECTINGCORDSCABLESAWAYFROMHIGHTEMPERATUREAREAS
)FTHECOATINGSOFTHECABLESMELTITCOULDCAUSEANACCIDENTlREBYA
short circuit. Take care when wiring in the engine compartment.
s7HENWIRINGTHECONNECTINGCABLESINAVEHICLEWITHANAIRBAGSYSTEM
never feed the cables through a place where it may affect the operation
of the airbag. An airbag not operating correctly in an emergency may
cause increased injury.
26
NX404
CAUTION
s6ERIFYWIRESWITHADIGITALMULTIMETERPRIORTOMAKINGANYCONNECTIONS
Many new vehicles use multiplexed and/or low voltage circuits that can
be damaged if a test light or logic probe is used.
s#ONNECTCABLESAPPROPRIATELY)FAWRONGCONNECTIONISMADETHISMAY
CAUSEAlREORACCIDENT
s7HENPASSINGCABLESTHROUGHTHEBODYOFTHEVEHICLEUSENON
conductive grommets. If the coatings of the cables are worn out by
RUBBINGTHISMAYCAUSEANACCIDENTlREORASHORTCIRCUIT
s!FTERWIRINGCABLESlXTHEMWITHINSULATIONTAPE
s"ESURETOSWITCHOFFTHEVEHICLEWHENCONNECTINGORDISCONNECTING
cords to/from the unit, otherwise an electric shock, injury or accident
may occur.
Quick Start Guide and
INSTALLATION
English
English
Installation manual............................................................................................................1
Warranty card............................................................ ......................................................1
CONTENTS
Remote controller ........................................................... ................................................1
Before Starting ..........................................................................................................27
2.
Package Contents ....................................................................................................27
3.
General Cautions ......................................................................................................27
4.
Cautions On Installation .............................................................................................27
5.
Installing The Main Unit ..............................................................................................28
HDMI cable holder................................................................ ...........................................1
Machine screw(M2 x 4)....................................................................................................2
RCA output cable....................................................................................... .....................1
Quick start guide
1.
Electro tap.......................................................................................................................2
Flush mount bolts ...........................................................................................................8
Hexagon Head Screw......................................................................................................8
AV cable .........................................................................................................................1
1. Before Starting
SWI cable .......................................................................................................................1
1. This set is exclusively for use in cars with a negative ground 12 V power supply.
2. Read these instructions carefully.
3. General Cautions
1. Do not open the case. There are no user- serviceable parts inside. If you drop anything into
the unit during installation, consult your dealer or an authorized Clarion service center.
3. Be sure to disconnect the battery “-”
terminal before starting. This is to prevent
short circuits during installation. (Figure 1)
2. Use a soft, dry cloth to clean the case. Never use a rough cloth, thinner, benzine, or alcohol
etc. For tough dirt, apply a little cold or warm water to a soft cloth and wipe off the dirt gently.
4. Cautions on Installation
Car battery
1. Prepare all articles necessary for installing the source unit before starting.
Figure 1
2. Package Contents
2. Install the unit within 30° of the horizontal plane. (Figure 2)
3. If you have to do any work on the car body, such as drilling holes, consult your car dealer
beforehand.
4. Use the enclosed screws for installation. Using other screws can cause damage. (Figure 3)
Main unit .........................................................................................................................1
Chassis
Wiring harness ................................................................................................................1
Chassis
GPS antenna ..................................................................................................................1
Damage
Clamp for GPS antenna's cable .......................................................................................3
Double face tape for GPS Antenna...................................................................................1
NX404
Owner’s manual (CD-R) ...................................................................................................1
Figure 2
Max. 8 mm (M5 screw)
Figure 3
NX404
27
Installing the Main Unit in NISSAN Vehicle
English
5. This unit has a fan motor in the back of the
main unit so as not to raise the temperature
in the source unit. When the fan motor vent
is covered with cords or mounting bracket,
it may cause a malfunction. Be sure not to
cover it when wiring cords.
Main Unit
Spacer (thickness: 1mm)
Quick start guide
(Not attached to the main
unit)
5. Installing the Main Unit
This unit is designed for fixed installation in the dashboard.
1. When installing the main unit in NISSAN vehicles, use the parts attached to the
unit and follow the instructions in Figure 5.
When installing the main unit in TOYOTA vehicles, use the parts attached to the
vehicle and follow the instructions in Figure 6.
2. Wire as shown in Section 7.
3. Reassemble and secure the unit in the dashboard and set the face panel and
center panel
Mounting bracket
6- Flat head screws
(1 pair for the left and right sides)
(M5x8)
(Attached to the main unit)
Figure 5
Mounting Screw Holes (Side View of the Main Unit)
6EHICLESOTHERTHAN.)33!.AND4/9/4!
For TOYOTA vehicle
For NISSAN vehicle
Figure 4
28
NX404
In some cases the center panel may require modification. (Trimming, filing, etc.)
t3FNPWJOHUIF.BJO6OJU
When the main unit is to be removed, disassemble it in the reverse of the order in
“INSTALLING THE MAIN UNIT”.
are attached to the
WIRE CONNECTIONS
Note:
ƹ ½¾ÇʽÁÆË̹ÄÄÁÆ¿Ɠº½ËÍʽÌǼÁË»ÇÆƽ»ÌÌÀ½Æ½¿¹ÌÁν»¹ºÄ½Ç¾ÌÀ½
car battery.
ƹ ÆÌÀ½ÇÈÌÁÇƹļ½ÎÁ»½ËƓÌÀ½»¹ºÄ½Ë¹Æ¼ÌÀ½ÇÆƽ»ÌÇÊ
cables are separately-sold items.
ƹ À½Æ»ÇÆƽ»ÌÌÀ½»¹ºÄ½Ɠº½ËÍʽÌÇŲÐÏÁÌÀÌÀ½»¹ºÄ½ÀÇļ½Ê
Quick start guide
and Machine screw(M2 x 4).
Main Unit
NX404
8- Hexagonal screws
(M5x8)
Center Panel
Mounting bracket
(*1)
(1 pair for the left and
right sides)
(*2)
*1. Some panel openings are too small for the unit depending on the vehicle type
and model. In such a case, trim the upper and lower sides of the panel frame by
about 0.5 to 1.5 mm so the unit can be inserted smoothly.
HDMI cable holder
2EFERTO
PAGE
*2. If a hook on the installation bracket interferes with the unit, bend and flatten it
with a nipper or similar tool.
CCA-750(sold separately)
HDMI CABLE
Typical Mounting Brackets
MIC
SUBWOOFER2
Black
SUBWOOFER1
Gray
Black
Gray
SWI
AUX2 AUDIO IN RCH
AUX2 AUDIO IN LCH
AUX2 VIDEO IN
Example 1
Example 3
Example 2
Affix the screws to the
marks.
English
Install by using parts attached to the vehicle. (Screws marked
vehicle.)
English
Installing the Main Unit in TOYOTA Vehicle
Red
Red
White
White White Red
Front
Right
Rear
Right
Front
Left
Rear
Left
REAR LCH
REAR RCH
Red
White
Yellow
White
Red
For Rear zone
VIDEO OUT
CAMERA
Yellow
Yellow
NX404
29
Cautions on Wiring
Installing The GPS Antenna
English
English
WARNING
s
s
Do not install the GPS antenna in a place where it may interfere with the operation of the
airbag or hinder the driver’s visual range.
Do not use the navigation system with the GPS antenna cord cut off. The power cables in the
cord may be short-circuited.
Quick start guide
Note:
s ThesuppliedGPSantennaisforinstallinginsidethevehicle.Donotinstallitoutsidethe
vehicle.
s InstalltheGPSantennamorethan50cmawayfromthemainunit,otheraudiodevicessuch
asCDplayer,andaradardetector.Ifitisinstallednearthesedevices,GPSreceptionmaybe
impaired.
s ToimprovetheGPSsignalreception,installtheGPSantennahorizontallyonaflatplane.
s DonotwaxorpaintthecoveroftheGPSantenna.Thismayreducetheperformanceofthe
GPSantenna.
s Install the GPSantennaatleast10cmawayfromthewindshield.
s Wipe off thedirtofthemountingsurfacebeforeinstallingtheGPSantenna.
GPS antenna
ʾƖ½ËÍʽÌÇÌÍÊÆÌÀ½ÈÇϽÊÇŰº½¾ÇʽÏÁÊÁÆ¿Ɩ
ʿƖ½È¹ÊÌÁ»ÍĹÊÄÑ»¹Ê½¾ÍÄÏÀ½Ê½ÑÇÍÊÇÍ̽ÌÀ½ÏÁʽËƖ
Keep them well away from the engine, and exhaust pipe, etc. Heat may
damage the wires.
3. If the fuse should blow, check to see if the wiring is correct.
If a fuse is blown, replace it with a new one of the same amperage rating
¹ËÌÀ½ÇÊÁ¿ÁƹÄƼʾ˂
ƽƖ
4. To replace the fuse, remove the old fuse on the back of the unit and
insert the new one. (Figure 7)
NOTE:
There are various types of fuse holder. Do not let the battery side touch other metal parts.
CAUTION
s Mount the GPS antenna.
After the connection, fix the cord by a clamp or insulation
the passenger side dashboard
where GPS signal interruption is
minimized.
s Wire the GPS antenna cord.
Fasten the cord using the cord
holders.
tape for protection.
Í˽Ƽʾ˂
ƽ
Cord holder
Fuse holder
Double-sided tape
Bottom face of the GPS antenna
NX404
s Stick the double-sided tape to the bottom
face of the GPS antenna.
Figure 7
Connect directly
Note:
Ground
s#ONNECTINGTHEPARKINGBRAKECORDTOLAMPGROUNDALLOWSYOUTOWATCHI0ODI0HONEVIDEO$6$VIDEO!6INPUT
Black
Purple
PurpleBlack
Red
Gray
White
WhiteBlack
Rear right V accessory
BRAKEWHILECONlRMINGSAFETYANDTHENENGAGETHEPARKINGBRAKEAGAIN
How to attach the electro-tap
Front right Parking brake lamp
Front left
cord to battery
Front left
Rear left
GreenBlack
Rear left
OrangeWhite
s)Fh!5$)//.,9vAPPEARSONTHESCREENJUSTAFTERTURNINGONTHE!##POWEROFTHECARRELEASETHEPARKING
Front right Green
BlueWhite
s7HENTHEPARKINGBRAKECORDISNOTCONNECTEDTHEMONITORWILLNOTSHOWANYVIDEOSOURCES
Amplifier turnon cord
Quick start guide
GrayBlack
when the parking brake is engaged.
Rear right Parking brake
1. Place the Parking brake cord at the stopper,
and fold it back in the direction of the arrow
2. Pass the Parking brake signal cord through,
and fold it back in the direction of the arrow.
Parking brake signal
cord
Electro-tap
Parking brake
signal cord
Parking brake signal
cord
Parking brake cord (Grassgreen)
ÌÇÈȽÊ
Parking brake cord
(Grass-green)
Illumination
Blue
Auto antenna
Brown
Phone interrupt
Grassgreen
PurpleWhite
English
V to battery
English
Yellow
Connecting the parking brake cord
Connect the cord to parking brake lamp ground in the meter panel.
Parking brake cord
Reverse gear cord
Note:
*1: Connecting the PHONE INTERRUPT terminal
The phone interrupt will mute the audio if the lead receives a negative or ground signal.
NX404
31
Clarion Co., Ltd.
All Rights Reserved. Copyright © 2013: Clarion Co., Ltd.
Printed in China / Imprimé en Chine / Impreso en China
2013/12
Owner’s manual
NX404
DVD MULTIMEDIA STATION WITH BUILT-IN NAVIGATION &
6.2’’ TOUCH PANEL CONTROL
English
English
CLARION PRODUCT REGISTRATION INFORMATION
For USA and Canada only
www.clarion.com
Owner’s Manual
Dear Customer:
Congratulations on your purchase of a Clarion mobile electronic product. We are
confident that you’ll enjoy your Clarion experience.
There are many benefits to registering your product. We invite you to visit our website
at www.clarion.com to register your Clarion product.
We have made product registration simple with our easy to use website.
The registration form is short and easy to complete. Once you’re registered, we can
keep you informed of important product information.
Register at www.clarion.com - it’s easy to keep your Clarion product up to date.
INFORMATIONS DE L’ENREGISTREMENT DE PRODUITS CLARION
Pour les Étas Unis et le Canada seulement
www.clarion.com
Cher client:
Nous vous remercions d’avoir acheté ce produit électronique mobile Clarion. Nous
sommes confiants que vous apprécierez votre expérience Clarion.
Il y a beaucoup d’avantage à enregistrer votre produits. Nous vous invitons à visiter
notre site Web www.clarion.com pour enregistrer votre produit Clarion.
Nous avons facilité la tache d’enregistrement de produit simple et facile grâce à notre
site Web.Le formulaire d’enregistrement est court et facile à compléter. Lorsque vous
êtes enregistrer, nous pouvons vous tenir informé des informations important de
produits. Enregistrer à www.clarion.com - c’est facile de mettre à jour votre produit
Clarion.
INFORMACIÓN DEL REGISTRO DE PRODUCT O DE CLARION
Para USA y Canada nomas
www.clarion.com
Querido Cliente:
Felicitaciones por su compra de producto electrónico móvil de Clarion. Estamos
seguros que usted gozará de su experiencia con el producto de Clarion.
Hay muchas ventajas al registrar su producto. Le invitamos a que visite nuestro sitio
en internet www.clarion.com para registrar su producto de Clarion.
Hemos hecho el registro de producto fácil en nuestro sitio. La forma de registro es
corta y fácil de completar. Una vez que lo registre, podremos proporcionarle la información de su producto.
Registrese en www.clarion.com - es fácil mantener su producto de Clarion actualizado.
Under Industry Canada regulations, this radio transmitter may only operate using an
antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry
Canada. To reduce potential radio interference to other users, the antenna type and its
gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not
more than that necessary for successful communication.
Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé pour
l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique
à l’intention des autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte
que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une communication satisfaisante.
NX404
1
Contents
English
Thank you for purchasing this Clarion product.
tPlease fully read this owner’s manual before operating this equipment.
t$IFDLUIFDPOUFOUTPGUIFFODMPTFEXBSSBOUZDBSEBOETUPSFJUJOBTBGFQMBDFXJUIUIJTNBOVBM
Owner’s Manual
1. FEATURES ...........................................................................................................4
Expanding Systems ..............................................................................................4
2. PRECAUTIONS ....................................................................................................5
3. CAUTIONS ON HANDLING.................................................................................8
Operation Panel ....................................................................................................8
USB Port ...............................................................................................................8
Cleaning ................................................................................................................8
Handling Discs ......................................................................................................9
4.OPERATIONAL PANEL ......................................................................................11
Functions of Buttons...........................................................................................11
5. REMOTE CONTROL..........................................................................................12
Remote Control Function....................................................................................13
6. MAIN MENU.......................................................................................................15
7. DVD VIDEO PLAYER OPERATIONS ...............................................................16
Discs ...................................................................................................................16
Change DVD System Settings ............................................................................17
Watching to a disc ..............................................................................................17
Operate the DVD Player menu ............................................................................18
Operate the Video files Player menu...................................................................20
Switching Subtitles .............................................................................................20
Video files list ......................................................................................................20
Play DivX Video-On-Demand file ........................................................................20
Playable disc video files......................................................................................21
8. CD PLAYER OPERATIONS...............................................................................22
Listening to a disc/Ejecting a disc ......................................................................22
Showing CD Player mode screen .......................................................................22
Operate the CD Player menu ..............................................................................22
Listening to compressed audio ..........................................................................23
Tag display function............................................................................................23
9. USB AUDIO OPERATIONS ...............................................................................25
Notes on using USB memories...........................................................................25
Select USB Audio mode .....................................................................................25
Playing Audio files in USB memory ....................................................................26
10. USB VIDEO OPERATIONS..............................................................................27
Notes on using USB memories...........................................................................27
Select USB Video mode .....................................................................................27
Playing video files in USB memory .....................................................................27
Playable Video file ...............................................................................................27
11. iPod OPERATIONS..........................................................................................29
Notes on using Apple iPod/iPhone .....................................................................29
iPod Audio ID3 Info .............................................................................................29
iPod audio playlist mode screen.........................................................................30
iPod Video Menu Operations ..............................................................................31
iPod Video ID3 mode screen ..............................................................................31
iPod Video List mode screen ..............................................................................32
iPod Video Simple Control Mode Screen ...........................................................32
iPod Video play mode screen .............................................................................32
iPod Audio Bluetooth mode................................................................................33
12. Pandora® OPERATIONS.................................................................................34
2
NX404
English
Owner’s Manual
NX404
English
Selecting the Pandora mode ..............................................................................34
Pandora Bluetooth mode ....................................................................................35
13. Bluetooth® AUDIO PLAYER OPERATIONS ..................................................36
Selecting the Bluetooth Audio mode ..................................................................36
Bluetooth audio player settings ..........................................................................36
Registering your Bluetooth audio player (Pairing)...............................................36
Selecting the Bluetooth audio player ..................................................................37
Controlling the Bluetooth audio player ...............................................................37
14. Bluetooth® TELEPHONE OPERATIONS ..........................................................38
Select the BT Phone mode .................................................................................38
Bluetooth Telephone settings .............................................................................38
Registering your cellular phone (Pairing) ............................................................39
Select the cellular phone ....................................................................................39
Obtaining the Phone Book data .........................................................................39
Telephone operations .........................................................................................39
15. TUNER OPERATIONS .....................................................................................41
16. HDMI MODE ....................................................................................................42
Wire connection of HDMI mode .........................................................................42
Select HDMI source ...........................................................................................43
HDMI Mode.........................................................................................................43
17. AUX .................................................................................................................44
18. CAMERA INPUT OPERATIONS .....................................................................44
19. REAR SOURCE OPERATIONS .......................................................................45
DVD Video in Rear ..............................................................................................45
DVD Video Rear Source Control Info mode. ......................................................45
DVD Video Rear Source Control Direct mode. ..................................................45
iPod Video in Rear ..............................................................................................46
iPod Video Rear Source Control Play Mode .......................................................46
iPod Video Rear Source ID3 Mode .....................................................................46
20. SETTING OPERATIONS ..................................................................................47
General Setup Menu ...........................................................................................47
Video Setup Menu ..............................................................................................47
Audio Setup Menu ..............................................................................................48
Navigation Setup Menu ......................................................................................48
Others Setup Menu .............................................................................................48
Set the Anti-Theft code .......................................................................................49
21. TROUBLESHOOTING .....................................................................................50
GENERAL............................................................................................................50
DVD PLAYER ......................................................................................................50
USB DEVICE .......................................................................................................51
Bluetooth ............................................................................................................51
TFT screen ..........................................................................................................52
22. ERROR DISPLAY.............................................................................................53
DVD PLAYER ......................................................................................................53
23. SPECIFICATIONS ............................................................................................54
24. WIRE CONNECTION GUIDE...........................................................................56
3
English
1. FEATURES
FLAC(Free Lossless Audio Codec) Compatible with ID3-TAG Display
Built-in Bluetooth® Handsfree (HFP) and Audio Streaming (A2DP &
Owner’s Manual
AVRCP)
Front-Panel Auxiliary Input and 6ch RCA Output with Subwoofer Control
Expanding Systems
Expanding audio features
External Power
ÅÈÄÁŲ½Ê
Expanding visual features
Rear monitor
Rear Vision Camera
iPod®
USB
Memory
(Connect via CCA-750)
iPhone®
iPhone®/ Smartphone via HDMI
Bluetooth
(Connect via CCA-750)
Telephone
(Connect via CCA-770,CCA-771)
NOTE:
tThe items listed outside of the frames are the commercial products generally sold.
tCCA-750,CCA-770,CCA-771:Sold separately.
4
NX404
English
English
2. PRECAUTIONS
WARNING
Owner’s Manual
t 'PSZPVSTBGFUZUIFESJWFSTIPVMEOPUXBUDIBOZWJEFPTPVSDFTBOEPSPQFSBUFUIFDPOUSPMTXIJMFESJWJOH
Please note that watching and operating any video sources while driving are prohibited by law in some
countries. Also, while driving, keep the volume to a level at which external sounds can be heard.
t %POPUEJTBTTFNCMFPSNPEJGZUIJTVOJU*UNBZDBVTFBOBDDJEFOUmSFPSFMFDUSJDTIPDL
t %POPUVTFUIJTVOJUXIFOBUSPVCMFFYJTUTTVDIBTOPTDSFFODPOUFOUBQQFBSTPSOPTPVOEJT
audible. It may cause an accident, fire, or electric shock. For that case, consult your authorized
dealer or a nearest Clarion service center.
t *ODBTFPGBQSPCMFNTVDIBTBOZNBUFSJBMIBTCFFOFOUFSFEJOUIFVOJUUIFVOJUHFUTXFUPS
smoke or strange smells come out of the unit, etc., stop using this unit immediately, and consult
your authorized dealer or a nearest Clarion service center.
Using it in that condition may cause an accident, fire, or electric shock.
t 6TFBGVTFXJUIUIFTBNFTQFDJmDBUJPOPOMZXIFOSFQMBDJOHUIFGVTF
Using a fuse with a different specification may causes a fire.
t 'PSUIFJOTUBMMBUJPOPGUIJTVOJUPSBDIBOHFJOUIFJOTUBMMBUJPOBTLZPVSBVUIPSJ[FEEFBMFSPSB
nearest Clarion service center for safety. Professional skills and experiences are required to do
so.
t 5IJTOBWJHBUJPOTZTUFNTIPVMEOPUCFVTFEUPSFQMBDFZPVSPXOKVEHNFOU/PJUJOFSBSZTVHHFTUFE
by this navigation system should ever override any highway regulations, your own judgment, or a
knowledge of safe driving practices. Do not follow the navigation system’s suggested itinerary if it
would cause you to perform a dangerous or illegal act, place you in a dangerous situation, or take
you into an area you consider unsafe.
t 5IFBEWJDFQSPWJEFECZUIFOBWJHBUJPOTZTUFNJTUPCFSFHBSEFEBTBTVHHFTUJPOPOMZ5IFSFNBZ
be times when the navigation system displays the vehicle’s location incorrectly, fails to suggest
the shortest route, or fails to direct you to your desired destination. In such instances, rely on your
own driving judgment, taking into account the driving conditions at the time.
t %POPUVTFUIFOBWJHBUJPOTZTUFNUPMPDBUFFNFSHFODZTFSWJDFT5IFEBUBCBTFEPFTOPUDPOUBJO
a complete listing of emergency services such as police stations, fire halls, hospitals and walk-in
clinics. Please show discretion and ask for directions in such instances.
t "TUIFESJWFSZPVBMPOFBSFSFTQPOTJCMFGPSZPVSESJWJOHTBGFUZ
t*OPSEFSUPBWPJEBUSBGmDBDDJEFOUEPOPUPQFSBUFUIFTZTUFNXIJMFESJWJOH
t*OPSEFSUPBWPJEBUSBGmDBDDJEFOUPQFSBUFUIFTZTUFNPOMZXIFOUIFWFIJDMFJTTUPQQFEBUBTBGF
place and the parking brake is on.
t*OPSEFSUPBWPJEBUSBGmDBDDJEFOUPSUSBGmDPGGFOTFSFNFNCFSUIBUBDUVBMSPBEDPOEJUJPOTBOE
traffic regulations take precedence over the information contained on the navigation system.
t5IFTPGUXBSFNBZDPOUBJOJOBDDVSBUFPSJODPNQMFUFJOGPSNBUJPOEVFUPUIFQBTTBHFPGUJNF
changing circumstances, and the sources of information used. Please respect current traffic
conditions and regulations at all times while driving.
t8IFSFBDUVBMSPBEDPOEJUJPOTBOEIJHIXBZSFHVMBUJPOTEJGGFSGSPNUIFJOGPSNBUJPODPOUBJOFEPO
the navigation system, abide by the highway regulations.
t,FFQUIFBNPVOUPGUJNFTQFOUWJFXJOHUIFTDSFFOXIJMFESJWJOHUPBTUSJDUNJOJNVN
t5IFOBWJHBUJPOTZTUFNEPFTOPUQSPWJEFOPSSFQSFTFOUJOBOZXBZJOGPSNBUJPOPOUSBGmDBOE
highway regulations; technical aspects of the vehicle including weight, height, width, load and
NX404
5
English
speed limits; road conditions including grade, percentage of incline and surface conditions;
obstacles such as the height and width of bridges and tunnels; and other current driving or road
conditions. Always rely on your own judgment when driving a car, taking into account current
driving conditions.
t5IJTFRVJQNFOUIBTCFFOUFTUFEBOEGPVOEUPDPNQMZXJUIUIFMJNJUTGPSB$MBTT#EJHJUBMEFWJDF
pursuant to Part 15 of the FCC Rules.
Owner’s Manual
These limits are designed to provide reasonable protection against harmful interference in a
residential installation.This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications.However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interfrence to radio reception, which
can be determined by turning the equipment off and on, the user is encourage to consult the
dealer or an experienced radio technician for help.
6
NX404
English
English
Owner’s Manual
1.When the inside of the car is very cold and
the player is used soon after switching on the
heater, moisture may form on the disc (DVD/
CD) or the optical parts of the player and
proper playback may not be possible. If
moisture forms on the disc (DVD/CD), wipe it
ÇŰÏÁÌÀ¹ËǾ̻ÄÇÌÀƖ¾ÅÇÁËÌÍʽ¾ÇÊÅËÇÆÌÀ½
optical parts of the player, do not use the
player for about one hour. The condensation
will disappear naturally allowing normal
operation.
V8VCNE8239DCL
8614A-CNE8239DCL
5 B
2.Driving on extremely bumpy roads which
cause severe vibration may cause the sound
to skip.
3.This unit uses a precision mechanism. Even
in the event that trouble arises, never open
the case, disassemble the unit, or lubricate
the rotating parts.
NX404
INFORMATION FOR USERS:
À¹Æ¿½ËÇÊÅǼÁŲ»¹ÌÁÇÆËÌÇÌÀÁËÈÊǼͻÌ
unapproved by the manufacturer will void the
warranty and will violate FCC approval.
NX404
7
English
3. CAUTIONS ON HANDLING
Operation Panel
For a longer service life, be sure to read the following cautions.
Owner’s Manual
t 5IFPQFSBUJPOQBOFMXJMMPQFSBUFQSPQFSMZJOB
temperature range of 0˚ to 60˚ C.
t %POPUBMMPXBOZMJRVJETPOUIFTFUGSPN
drinks, umbrellas etc. Doing so may damage
the internal circuitry.
t %POPUEJTBTTFNCMFPSNPEJGZUIFTFUJOBOZ
way. Doing so may result in damage.
t 4VCKFDUJOHUIFPQFSBUJPOQBOFMUPTIPDLT
may result in breakage, deformation or other
damage.
t 5IFSFNPUFDPOUSPMVOJUNBZOPUXPSLJGUIF
remote control sensor is exposed to direct
sunlight.
t *OFYUSFNFMZDPMEXFBUIFSUIFEJTQMBZ
movement may slow down and the display
may darken, but this is not a malfunction.
The display will work normally when the
temperature increases.
t 4NBMMCMBDLBOETIJOZTQPUTJOTJEFUIFMJRVJE
crystal panel are normal for LCD products.
t %POPUMFUDJHBSFUUFTCVSOUIFEJTQMBZ
t *GBQSPCMFNTIPVMEPDDVSIBWFUIFTFU
inspected at your store of purchase.
USB Port
t 5IF64#NFNPSZTUJDLTNVTUCFSFDPHOJ[FE
as “USB mass storage class” to work
properly. Some models may not operate
correctly.
When the memorized data is lost or
damaged by any chance, Clarion shall not
be liable for any damage.
When using an USB memory stick, we
recommend that you backup your data stored
on it before by using a personal computer etc.
t %BUBmMFTNBZCFCSPLFOXIFOVTJOH64#
memory sticks in the following situation:
When disconnecting the USB memory stick or
turning the power off during writing or reading
data. When affected by static electricity or
electric noise. Connect/disconnect the USB
memory stick when it is not accessed.
t $POOFDUJOHXJUIUIFDPNQVUFSJTOPUDPWFSFE
Cleaning
ƹ Ľ¹ÆÁÆ¿ÌÀ½»¹ºÁƽÌ
Use a soft, dry cloth and gently wipe off
the dirt. For tough dirt, apply some neutral
detergent diluted in water to a soft cloth, wipe
off the dirt gently, then wipe again with a dry
cloth.
Do not use benzene, thinner, car cleaner, etc.,
as these substances may damage the cabinet
or cause the paint to peel. Also, leaving rubber
or plastic products in contact with the cabinet
8
NX404
for long periods of time may cause stains.
ƹ Ľ¹ÆÁÆ¿ÌÀ½ÄÁÉÍÁ¼»ÊÑË̹ÄȹƽÄ
The liquid crystal panel tends to collect dust,
so wipe it off occasionally with a soft cloth.
The surface is easily scratched, so do not rub
it with hard objects.
Ball-point pen
Roughness
Never stick labels on the surface of the
disc or mark the surface with a pencil or
pen.
t/FWFSQMBZBEJTDXJUIBOZDFMMPQIBOF
tape or other glue on it or with peeling off
marks. If you try to play such a disc, you
may not be able to get it back out of the
DVD player or it may damage the DVD
player.
t%POPUVTFEJTDTUIBUIBWFMBSHF
scratches, are misshapen, cracked,
etc. Use of such discs may cause
missoperation or damage.
t5PSFNPWFBEJTDGSPNJUTTUPSBHFDBTF
press down on the center of the case
and lift the disc out, holding it carefully
by the edges.
t%POPUVTFDPNNFSDJBMMZBWBJMBCMFEJTD
protection sheets or discs equipped with
stabilizers, etc. These may damage the
disc or cause breakdown of the internal
mechanism.
Cleaning
t5PSFNPWFmOHFSNBSLTBOEEVTUVTF
a soft cloth and wipe in a straight
line from the center of the disc to the
circumference.
t%POPUVTFBOZTPMWFOUTTVDIBT
commercially available cleaners, antistatic spray, or thinner to clean discs.
t"GUFSVTJOHTQFDJBMEJTDDMFBOFSMFUUIF
disc dry off well before playing it.
On Discs
t/FWFSUVSOPGGUIFQPXFSBOESFNPWFUIF
unit from the car with a disc loaded.
CAUTION
For your safety, the driver should not
insert or eject a disc, opening the
operation panel while driving.
NX404
9
Owner’s Manual
Storage
t%POPUFYQPTFEJTDTUPEJSFDUTVOMJHIUPS
any heat source.
t%POPUFYQPTFEJTDTUPFYDFTTIVNJEJUZ
or dust.
t%POPUFYQPTFEJTDTUPEJSFDUIFBUGSPN
heaters.
English
Handling
t/FXEJTDTNBZIBWFTPNFSPVHIOFTT
around the edges. If such discs are used,
the player may not work or the sound
may skip. Use a ball-point pen or the like
to remove any roughness from the edge
of the disc.
English
Handling Discs
English
About the registered marks, etc.
Owner’s Manual
ƹ This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of this
copyright protection technology must be authorized
by Rovi Corporation, and is intended for home and
other limited viewing uses only unless otherwise
authorized by Rovi Corporation.
Reverse engineering or disassembly is prohibited.
ƹ Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
ƹ "Made for iPod," and "Made for iPhone" mean
that an electronic accessory has been designed to
connect specifically to iPod, or iPhone, respectively,
and has been certified by the developer to meet
Apple performance standards. Apple is not
responsible for the operation of this device or its
compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod
or iPhone may affect wireless performance.
iPhone, iPod, iPod nano and iPod touch are
trademarks of Apple Inc., registered in the U.S. and
other countries.
Lightning is a trademark of Apple Inc.
ƹ The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth® SIG, Inc. And
any use of such marks by Clarion Co.,Ltd. is under
license. Other trademarks and trade names are
those of their respective owners.
ƹ Pandora. the Pandora logo. and the Pandora trade
dress are trademarks or registered trademarks of
Pandora Media. Inc. used with permission.
10
NX404
ƹ DivX®, DivX Certified® and associated logos
are trademarks of Rovi Corporation or its
subsidiaries and are used under license.
DivX Certified® to play DivX® video, including
premium content. Covered by one or more
of the following U.S. patents: 7,295,673;
7,460,668; 7,515,710; 7,519,274
ABOUT DivX VIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary of
Rovi Corporation.
This is an official DivX Certified® device that
has passed rigorous testing to verify that it
plays DivX video. Visit divx.com for more
information and software tools to convert your
files into DivX videos.
ABOUT DivX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order
to play purchased DivX Video-on-Demand
(VOD) movies. To obtain your registration
code, locate the DivX VOD section in your
device setup menu. Go to vod.divx.com for
more information on how to complete your
registration.
English
English
4.OPERATIONAL PANEL
]
[Disc slot]
[NAVI/AV]
[POWER/VOL]
[IR]
[RESET]
[microSD slot]
[Cover]
[AUX IN]
Only navigation map card is available and don’t remove it when unit is power on
Functions of Buttons
[POWER/VOL] Knob
s0RESSTHISKNOBTOTURNONTHEPOWER
s7HENTHEPOWERISALREADYONITMOVESTOTHE
.AVIGATIONMODE)F.AVIGATIONMODEISDISPLAYEDIT
MOVESTOTHE.AVIGATIONMENU
s+EEPPRESSINGTHISKNOBMORETHANSECONDTOTURN
OFFTHEPOWER
s4URNTHISKNOBTOLEFTORRIGHTTODECREASEORINCREASE
THEVOLUMEOFTHESYSTEM
[NAVI/AV]"UTTON
s0RESSTHISBUTTONTODISPLAY.!6)PRESSAGAINTO
RETURNCURRENTSOURCE
s0RESSANDHOLDTHISBUTTONFORSECONDSTODISPLAY
THE$IMMERSETTINGMENU
[microSD slot ]
.OTE4HEMICRO3$CARDISONLYFORNAVIGATION0LEASE
DONTINSERTMICRO3$CARDFOROTHERPURPOSE!FTER
INSERTIONOFMICRO3$CARDFOR-!0DONTREMOVEIT
OTHERWISETHENAVIGATIONFUNCTIONWILLBEDISABLED
[AUX IN]
!58#ONNECTOR
[Microphone]
4HISISUSEDFOR"LUETOOTHPHONE
[IR]3%.3/2
s2ECEIVERFORTHEREMOTECONTROLUNITOPERATINGRANGE
DEGREEINALLDIRECTIONS
[ ]%JECT
s0RESSTOEJECTDISCFROMTHEUNIT
[MENU]"UTTON
s0RESSTHISBUTTONTODISPLAYMAINMENUPRESSAGAIN
TORETURNCURRENTSOURCE
s0RESSANDHOLDTHISBUTTONFORSECONDSTOTURNOFF
THEMONITOR0RESSANYPLACEOFTHESCREENTOTURNON
THEMONITORAGAIN
[RESET]"UTTON
s 0RESSTHISBUTTONTOHARDWARERESETTHEUNIT
Note: When the [RESET] button is pressed, frequencies
of radio stations, titles, etc. stored in memory are
cleared.
NX404
11
Owner’s Manual
[
[Microphone]
[MENU]
English
5. REMOTE CONTROL
RCX005 Remote Control Included
3IGNALTRANSMITTER
/PERATINGRANGEªINALLDIRECTIONS
Owner’s Manual
[MUTE]
[
/
]
[ 0-9 ]
[OPEN]
[POWER / SRC]
[VOLUME]
[NAV/ AV]
[SRCH]
[BACK]
[BAND]
[SET]
[MENU]
[PIC]
[ENT]
[
,
,
,
]
[TAG]
[TITLE]
[RPT]
[ROOT]
[
], [
]
[
], [
[ZOOM]
[SUB.T]
[AUDIO]
[ANGLE]
Replacing the batteries
0RESSTHERETENTIONTABANDPULLOUTTHE
]
CAUTION
BATTERYTRAYANDREMOVETHEOLDBATTERY
s+EEPTHEBATTERYOUTOFTHEREACHOFCHILDREN
)NSERTTHENEW#2BATTERYANDSLIDE
3HOULDTHEBATTERYBESWALLOWEDCONSULTADOCTOR
IMMEDIATELY
THEBATTERYTRAYBACKINTHEREMOTECONTROL
THESAMEDIRECTIONTHATYOUREMOVEDIT
0LEASEENSURETHETRAYISINSERTEDINTHE
CORRECTDIRECTION
12
NX404
s"ATTERIESBATTERYPACKORBATTERIESINSTALLED
MUSTNOTBEEXPOSEDTOEXCESSIVEHEATSUCHAS
SUNSHINElREORTHELIKE
s2EMOVETHEBATTERYIFTHEREMOTECONTROLISNOT
USEDFORAMONTHORLONGER
Important
s$ONOTSTORETHEREMOTECONTROLINHIGH
TEMPERATURESORDIRECTSUNLIGHT
s4HEREMOTECONTROLMAYNOTFUNCTIONPROPERLYIN
DIRECTSUNLIGHT
s$ONOTHANDLETHEBATTERYWITHMETALLICTOOLS
s$ONOTLETTHEREMOTECONTROLFAILONTOTHEmOOR
WHEREITMAYBECOMEJAMMEDUNDERTHEBRAKEOR
ACCELERATORPEDAL
s$ONOTSTORETHEBATTERYWITHMETALLICOBJECTS
s)FTHEBATTERYLEAKSWIPETHEREMOTECONTROL
COMPLETELYCLEANANDINSTALLANEWBATTERY
Remote Control Functions
9OUCANUSETHEREMOTECONTROLUNITTOCONTROLTHE.8
Note:
s4HEWIRELESSREMOTECONTROLOPERATIONMAYNOTBEOPTIMALINDIRECTSUNLIGHT
/
]"UTTON
[BAND] "UTTON
s0RESSTHISBUTTONTOPLAYORPAUSEVIDEOANDAUDIO
MEDIA
s3WITCHTONEXTBANDALTERNATELY
s0RESSTHISBUTTONMORETHANSECONDTOSTOPVIDEO
ANDAUDIOMEDIA
s0RESSTHISBUTTONTOOPENTHE!UDIOSETTINGMENUIN
ANYMODE
[MUTE]"UTTON
[BACK] "UTTON
s-UTEOR5NMUTETHESPEAKER
s0RESSTHISBUTTONTOQUITMAINMENUIFCURRENTSCREEN
ISMAINMENU
s4HESYMBOL ONUPPERRIGHTAREAOFTHESCREEN
INDICATESTHATSPEAKERISMUTED
[POWER/SRC] "UTTON
s0RESSTHISBUTTONTOMOVETHEFOCUSTONEXTAVAILABLE
SOURCEITEMONMAINMENU
s0RESSTHISBUTTONTOPOWERONWHENTHEUNITISPOWER
OFF
[SET] "UTTON
[
], [
], [
], [
]"UTTONS
s0RESSTHISBUTTONFORCURSORMOVEMENTINMAINMENU
OR3ETTINGMODE
s&ROMTHEMAINMENUYOUCANSELECTYOURDESIRED
SOURCEORCHANGEYOURSETTINGS
[MENU]"UTTON
s0RESSTHISBUTTONMORETHANSECONDTOPOWEROFF
WHENTHEUNITISPOWERON
s0RESSTHISBUTTONTOENTERTHE-!).-%.5ORRETURN
CURRENTRESOURCE
[0 - 9] "UTTONS
[PIC]"UTTON
s5SEINTHE+EY0ADSCREENTOSELECTTHERADIO
s5SETOSELECTTHETRACKINTHETRACKLISTSCREEN
s0RESSTOENTER$6$VIDEOCHAPTERSTITLESINTHE+EY
0ADSCREEN
s0RESSANDHOLDTHISBUTTONTOCHANGEYOURMONITOR
$IMMER
[ENT] "UTTON
[VOLUME] "UTTONS
s0RESSTOlXTHEENTEREDDATAINTHE+EY0ADSCREEN
ORENTERTHEITEMTHECURSORISON
s)NCREASEANDDECREASEVOLUME
[TAG]"UTTON
[NAVI/AV]"UTTON
s.OFUNCTION
s0RESSTHISBUTTONTOSWITCHBETWEENCURRENTSOURCE
ANDCURRENTPOSITIONONNAVIGATIONMAP
[TITLE] "UTTON
s0RESSTOGOTOTHETITLEMENUONTHE$6$
[SRCH]"UTTON
[ROOT] "UTTON
s0RESSTHISBUTTONTOOPENCHAPTERORTITLESEARCH
WINDOWWHILEPLAYING$6$
s0RESSTOGOTOTHEROOTMENUONTHE$6$
[RPT]"UTTON
NX404
13
Owner’s Manual
s4HEREISADANGEROFEXPLOSIONIFBATTERYIN
INCORRECTLYREPLACED2EPLACEDONLYWITHTHESAME
OREQUIVALENTTYPE
[
English
s5SEONE#26LITHIUMBATTERY
English
s7HENDISPOSINGOFUSEDBATTERIESCOMPLYWITH
GOVERNMENTALREGULATIONSORENVIRONMENTALPUBLIC
INSTITUTIONSRULESTHATAPPLYINYOURCOUNTRYAREA
CAUTION
English
s0RESSTOPERFORMCHAPTERREPEATTITLEREPEATREPEAT
OFFWHILEPLAYING$6$MODE
[AUDIO] "UTTON
s0RESSTOPERFORM2EPEAT4RACK2EPEAT!LLWHILE
PLAYING#$
s0RESSTOSWITCHTHE!5$)/CHANNELOFTHEDISCWHILE
PLAYING$6$
Owner’s Manual
s0RESSTOPERFORM2EPEAT4RACK2EPEAT&OLDER
2EPEAT!LLWHILEPLAYING-07-!ORVIDEOlLESON
DISC
s0RESSTOPERFORM2EPEAT4RACK2EPEAT&OLDER
2EPEAT!LLWHILEPLAYING-07-!ORVIDEOlLESIN
53"MEMORY
[
] "UTTONS
], [
s0RESSTOSEEKTHENEXTAVAILABLELOWERORHIGHER
STATIONIN4UNERMODE
s0RESSTOSELECTTHENEXTLOWERORHIGHERCHAPTER
NUMBERIN$6$VIDEOMODE
s0RESSTOSELECTTHENEXTLOWERORHIGHERTRACKIN#$
53"6IDEO53"!UDIOMODE
s0RESSFORMOVEMENTOFBACKGROUNDSOURCEIN
.AVIGATIONMODE
[
], [
]"UTTONS
s0RESSTOMANUALLYSELECTTHENEXTLOWERORHIGHER
STATIONIN4UNERMODES
s0RESSTOPERFORMFASTBACKWARDORFASTFORWARD
SEARCHING0RESSAGAINTOCHANGETHESPEEDTOX
XXORX
s0RESSFORMOVEMENTOFBACKGROUNDSOURCEIN
.AVIGATIONMODE
[ZOOM]"UTTON
s0RESSTOTURNONANDZOOMINWHILEPLAYING$6$9OU
CANZOOMINUPTOX.OALL$6$DISCSUPPORTSTHIS
14
NX404
FUNCTION.
[SUB-T]"UTTON
s0RESSTOSWITCHNEXTAVAILABLESUBTITLEWHILEPLAYING
$6$
s0RESSTODISPLAY6IDEOMENUINI0ODMODE
[ANGLE]"UTTON
s0RESSTOSWITCHTHEDIFFERENT!.',%WHILEPLAYING
$6$.OALL$6$DISCSUPPORTSTHISFUNCTION
s0RESSTODISPLAY!UDIOMENUINI0ODMODE
[OPEN]"UTTON
s0RESSTOEJECTDISCFROMTHEUNIT
3
4
5
6
7
8
9
10
11
12
13
14
15
4UNER4OUCHTHEBUTTONTODISPLAYTHE4UNERMODE
0ANDORA4OUCHTHEBUTTONTODISPLAYTHE0ANDORA
MODE
"LUETOOTH!UDIO4OUCHTHEBUTTONTODISPLAYTHE
"LUETOOTH!UDIOMODE
$ISC!UDIO4OUCHTHEBUTTONTODISPLAYTHE$ISC
!UDIOMODE
I0OD!UDIO4OUCHTHEBUTTONTODISPLAYTHEI0OD
!UDIOMODE
.AVIGATION4OUCHTHEBUTTONTODISPLAYTHE
.AVIGATIONMODE
.*3/4OUCHTHEBUTTONTODISPLAYTHE($-)
MODE
53"!UDIO4OUCHTHEBUTTONTODISPLAYTHE53"
!UDIOMODE
!584OUCHTHEBUTTONTODISPLAYTHE!58
MODE
$ISC6IDEO4OUCHTHEBUTTONTODISPLAYTHE$ISC
6IDEOMODE
53"6IDEO4OUCHTHEBUTTONTODISPLAYTHE53"
6IDEOMODE
I0OD6IDEO4OUCHTHEBUTTONTODISPLAYTHEI0OD
6IDEOMODE
4ELEPHONE4OUCHTHEBUTTONTODISPLAYTHE
4ELEPHONEMODE
#AMERA4OUCHTHEBUTTONTODISPLAYTHE#AMERA
MODE
!584OUCHTHEBUTTONTODISPLAYTHE!58
MODE
3ETTINGBUTTON4OUCHTHEBUTTONTODISPLAYTHE
3ETTINGMENU
!UDIOOFF4OUCHTHEBUTTONTOMAKEAUDIOSOURCE
VOICEOFF
8KGX4OUCHTHEBUTTONTODISPLAYTHE8KGXMODE
Scrolling the menu
Flicking to right or left it will switch to next or previous
page of main menu.
16
17
18
Moving the menu position
1. Touch any quadrate icon on main menu more than 2
seconds, the icon will float on main menu.
2. Scrolling the floating icon to any position you want.
NX404
15
English
2
Owner’s Manual
1
English
6. MAIN MENU
English
7. DVD VIDEO PLAYER OPERATIONS
Discs
Owner’s Manual
Playable discs
This DVD video player can play the following
discs.
Playable discs
DVD video discs
Audio CD
CD TEXT
ĹѹºÄ½Å½¼Á¹ŲĽË
MP3/WMA/AAC
DivX
-0
About CD Extra disc
A CD Extra disc is a disc in which a total of two
˽ËËÁÇÆËÀ¹Î½º½½Æʽ»Çʼ½¼ƖÀ½ŲÊËÌ˽ËËÁÇÆ
is Audio session and the second session is Data
session.
Your personally-created CDs with more than
second data sessions recorded cannot be played
on this DVD video player.
Note:
t When you play a CD Extra disc, only the first
session will be recognized.
About playing a CD-R/CD-RW disc (MP3,
WMA)
This player can play CD-R/CD-RW discs
previously recorded in music CD format (MP3,
WMA).
About playing a DVD-R/RW or DVD+R/RW
disc
ˀƯŲĽËʽ»Çʼ½¼ÇÆƘƯ¹Æ¼
DVD+R/RW discs can be played.
Discs that cannot be played back
This DVD video player cannot play back DVDAudio, DVD-RAM, Photo CDs, etc.
Note:
t It may also not be possible to play back CDs
recorded on a CD-R unit and CD-RW unit.
(Cause: disc characteristics, cracks, dust/dirt,
dust/dirt on player’s lens, etc.)
t If a CD-R or CD-RW disc that has not been
finalized is played, it will take a long time to
start playing. Also, it may not be possible to
play depending on its recording conditions.
16
NX404
t You cannot play SuperAudio CD.
The CD player is not supported even if it is a
hybrid disc.
About MP3/WMA playback
This unit can play back CD-R/CD-RW, DVD-R/
RW and DVD+R/RW discs on which MP3/WMA
music data have been recorded.
For a detailed information, see the section
entitled “Listening to compressed audio”.
Note on region numbers
The DVD video system assigns a region number
to DVD video players and DVD discs by sales
area. DVD video players sold in Asia can play
back DVD discs with the region number “ALL”,
“1” or any combination of numbers that also
incorporate a “1”.
The DVD video region number is marked on the
disc jacket as shown below.
ALL
1
1
3
4
4OUCHTHE[Settings]BUTTONONTHE-AIN-ENUTO
ACCESSTHE6IDEOSETUPMENU
4OUCH[Video] BUTTON4HEVIDEOMENUISDISPLAYED
+ID3AFE
'
0'
0'
0'2
2
.#
+ID3AFE
'ENERAL!UDIENCES
0ARENTAL'UIDANCE3UGGESTED
0ARENTS3TRONGLY#AUTIONED
0ARENTAL'UIDANCE2ESTRICTED
2ESTRICTED
.O/NE!ND5NDER!DMITTED
!DULT
/NLY!DULT
Owner’s Manual
Selecting DVD Setup Menu
3ELECTOthersSCREENWHILEINSettingMODE4OUCH
;0ARENTAL#ONTROL=BUTTON4OUCHTHEDESIREDRATINGFOR
LEVELCONTROL5SETHISTABLETOSETTHEPARENTALLEVEL
s 4HECONTENTSTHATTHEPARENTALLEVELRESTRICTSVARY
WITHTHECOUNTRYCODE
Note:4HERATINGCANBESELECTEDONLYUNDERTHE
password unlocked status, and the limits can be set only
under the password locked status.
Watching to a Disc
Setting up the Screen Size
4OUCHTHE[DVD Wide Screen Mode]BUTTONTOTURNON
ORTURNOFFTHE$6$WIDESCREENMODE
4HEFACTORYDEFAULTSETTINGIShOFFv
.OTE.OTALL$6$DISCSUPPORTTHISFUNCTION
Setting up the password for parental level
control
4HEFACTORYDEFAULTPASSCODEIShv
In Main Menu4OUCH[Settings]BUTTON4OUCH
[Others]BUTTONONTHEDISPLAY4OUCHTHE[Set
Password] ----ANDANUMERICALKEYPADWILLAPPEAR
4OLOADADISC
)NSERTTHEDISCINTOTHECENTEROFTHEINSERTIONSLOTTHE
LABELSIDEFACINGUP
CAUTION
For your safety, the driver should not
insert or eject a disc, opening the
operation panel while driving.
Note:
s.EVERINSERTFOREIGNOBJECTSINTOTHEDISCINSERTIONSLOT
s)FTHEDISCISNOTINSERTEDEASILYTHEREMAYBEANOTHER
disc in the mechanism or the unit may require service.
sCMSINGLEPLAYDISCSCANNOTBEUSED
$ISCSTARTSPLAYINGAUTOMATICALLY
WARNING
Some videos may be recorded at higher
than desired volume levels. Increase the
volume gradually from the minimal setting
after the video has started.
Ejecting a disc
)NPUTANEWPASSWORDANDCOMEAGAIN4HEPASSWORD
ISSET
Note:
When a disc with view restrictions is inserted, you will
BEPROMPTEDTOINPUTTHISPASSWORD4HEDISCWILLNOTBE
viewable until the correct password is entered.
4OEJECTADISCPRESSEJECT[ ]BUTTON4HEPLAY
MODETHENSWITCHESTOTHE4UNERMODE
)FTHEDISCISLEFTINTHEEJECTEDPOSITIONFOR
SECONDSTHEDISCISAUTOMATICALLYRELOADED)NTHIS
CASETHEPLAYMODEWILLREMAININTHE4UNERMODE
Note: If you force a disc into before auto reloading, it
may damage a disc. Change DVD System Settings
NX404
English
Note:
If the setup operation is performed in the middle of DVD
video play, the disc will restart from the beginning.
Set rating for parental level control
English
Change DVD System Settings
17
Showing DVD Player mode screen
Operate the DVD Player Menu
English
Owner’s Manual
!FTERDISCISLOADEDTHEPLAYMODEISAUTOMATICALLY
ENGAGED
4OUCHANYPLACEOFTHESCREENTODISPLAY$6$6IDEO
MENUTOUCHTHESCREENAGAINTORETURNTHEPLAYBACK
SCREEN4HEDISPLAYWILLRETURNTOTHEPLAYBACKSCREEN
IFYOUDONOTTOUCHTHESCREENFORSECONDS
12
11
10
9OUCANSELECTTHEBUTTONITEMSDISPLAYEDINTHE$6$
MENUBYDIRECTLYTOUCHINGIT
Play/Pause Playback
4OUCH[
4OUCH[
]BUTTONTOPAUSEDURINGPLAYBACK
]BUTTONAGAINTORESUMEPLAYBACK
Skip (Search) a Chapter
4OUCH[ ]OR[ ]BUTTONDURINGPLAYBACK
#HAPTERSARESKIPPEDDOWNORUPFROMCURRENT
LOCATIONSASMANYTIMESASTHEBUTTONISTOUCHEDAND
PLAYBACKSTARTS
Skip use seek bar
4OUCHTHETRIANGLE[ ]ONSEEKBARANDDRAGITTOANY
POSITIONWHEREYOUWANTTOSTARTPLAYBACK
Fast Forward/Fast Backward
1
2
3
4
5
6
7
8
9
4OUCH[ ]OR[ ]BUTTONANDHOLDSECONDSTO
STARTFASTBACKWARDORFASTFORWARDDURINGPLAYBACK
4HEPLAYBACKSPEEDSTARTSATXTHENWILLINCREASE
TOXXANDX2ELEASETHEBUTTONWILLCONTINUE
PLAYINGWITHNORMALSPEED
Note:
s.OAUDIOISREPRODUCEDDURINGFASTFORWARDANDFAST
backward operation.
s4HEFASTFORWARDANDFASTBACKWARDSPEEDMAYDIFFER
depending on the disc.
13
Search function
14
15
16
17
18
/PTIONBUTTON
3HOW#URSORKEYSBUTTON
0REVIOUS#HAPTER&AST"ACKWARDBUTTON
0LAY0AUSEBUTTON
.EXT#HAPTER&AST&ORWARDBUTTON
%LAPSEDPLAYINGTIME
3EEKBAR
4OTALTIME
-ENU,ISTBUTTON
3YSTEMTIME
"LUETOOTHSTATUSINDICATOR
$6$PLAYBACKINFORMATION
3HORTCUTBUTTON
2EPEAT3WITCHINGBUTTON
!UDIO#HANNELSWITCHINGBUTTON
3UBTITLESWITCHINGBUTTON
)NFORMATIONBUTTON
$IRECTCHAPTERORTITLESEARCHINGBUTTON
18
NX404
9OUCANLOCATETHEBEGINNINGOFASCENEUSINGTHE
CHAPTERNUMBERSORTITLENUMBERSRECORDEDONTHE
$6$6IDEODISC
3HOWINGTHE$6$6IDEOMENUTOUCH[
]BUTTON
4HE+EY0ADSCREENAPPEARSWITHTHECHAPTER4ITLE
NUMBERINPUTMODE
4OUCHING[
]BUTTONTURNSTHE+EY0ADTOTHE
CHAPTERNUMBERINPUTMODE
4OUCHING[
]BUTTONTURNSTHE+EY0ADTOTHETITLE
NUMBERINPUTMODE
s4ITLE
!LARGESEGMENTTODIVIDETHEDATAAREAOFTHEDISC
s#HAPTER
!SMALLSEGMENTTODIVIDETHEDATAAREAOFTHEDISC
)NPUTTHENUMBEROFTHETITLECHAPTERTHATYOUWANT
TOPLAYWITHTHE[0]TO[9]KEY
]BUTTON#HANGE$6$3YSTEM
4OUCHTHE[
3ETTINGS
Repeat Playback
4HISOPERATIONPLAYSBACKCHAPTERSRECORDEDONTHE
$6$6IDEOREPEATEDLY
]BUTTON
3HOWINGTHE$6$6IDEOMENUTOUCH[
]BUTTONONCEFOR2EPEAT#HAPTERAGAIN
4OUCH[
FOR2EPEAT4ITLE
4OUCH[
]BUTTONAGAINTOTURNOFFTHEREPEAT
PLAYBACK
Using the Title Menu
/N$6$DISCSCONTAININGTWOORMORETITLESYOUCAN
SELECTFROMTHETITLEMENUFORPLAYBACK
/N$6$DISCSINWITHTWOORMORESUBTITLELANGUAGES
HAVEBEENRECORDEDYOUCANSWITCHAMONGTHE
SUBTITLELANGUAGESDURINGPLAYBACK
3HOWINGTHE$6$6IDEOMENUTOUCH[
]BUTTON
TOSELECTASUBTITLEDURINGPLAYBACK%ACHTIMEYOU
TOUCHTHEBUTTONYOUCANSWITCHAMONGSUBTITLES
s )TMAYTAKETIMETOSWITCHAMONGSUBTITLES
$EPENDINGONTHEDISCUPTOKINDSOFSUBTITLES
MAYBERECORDED&ORDETAILSSEETHEMARKOFTHE
DISC )NDICATESTHATKINDSOFSUBTITLESHAVE
BEENRECORDED
$EPENDINGONTHEDISCSWITCHINGMAYBE
COMPLETELYIMPOSSIBLEORIMPOSSIBLEONSOME
SCENES
4OTURNOFFSUBTITLESREPEATTOUCHING[
]BUTTON
UNTILSUBTITLESARETURNEDOFF
Displaying the playback status
4OUCH[
]BUTTONON$6$0LAYERMODESCREEN
0LAYBACKSTATUSISDISPLAYEDONSCREEN
Play MP4/DivX video files
4HISSYSTEMCANPLAYVIDEOlLES!6)-0ETCSTORED
ONDISC
3HOWINGTHE$6$6IDEOMENUTOUCH[
]BUTTON
DURINGPLAYBACK
$EPENDINGONTHEDISCTHETITLEMENUMAYNOTBE
CALLED
4OUCHTHETITLEMENUSCREEN!NDTOUCHTHE3HOW
#URSORKEYS
3ELECTTHEITEMSINTHETITLEMENUSCREENBY
DIRECTIONALBUTTONS
$EPENDINGONTHEDISCITEMSMAYNOTBESELECTED
WITHTHEDIRECTIONALBUTTONS
4OUCH[
]BUTTONTOlXONTHESELECTEDITEM
]BUTTON
4OUCH[
Switching Audio
/NDISCSINWHICHTWOORMOREAUDIOSORAUDIO
LANGUAGESHAVEBEENRECORDEDYOUCANSWITCHAMONG
THEAUDIOLANGUAGESDURINGPLAYBACK
3HOWINGTHE$6$6IDEOMENUTOUCH[
]BUTTON
DURINGPLAYBACK
s %ACHTIMEYOUTOUCHTHEBUTTONYOUCANSWITCH
AMONGAUDIOLANGUAGES
s )TMAYTAKETIMETOSWITCHAMONGAUDIOS
$EPENDINGONTHEDISCUPTOKINDSOFAUDIOSMAY
BERECORDED&ORDETAILSSEETHEMARKOFTHEDISC
)NDICATESTHATAUDIOSHAVEBEENRECORDED
7HENTHEPOWERISTURNEDONANDWHENTHEDISC
ISCHANGEDTOANEWONETHELANGUAGESETASTHE
FACTORYDEFAULTISSELECTED)FTHATLANGUAGEHASNOT
English
Switching Subtitles
Note:
DivX Certified® to play DivX® video, including premium
content.
Showing video files Player mode screen
!FTERDISCWITHVIDEOlLESISLOADEDTOUCH;$ISC
6IDEO=BUTTONON-!).-%.5TOSHOWVIDEOlLES
PLAYERMODESCREEN
4OUCHTHESCREENOFTHEPLAYINGVIDEOlLETODISPLAY
6IDEOlLESPLAYERMENUTOUCHTHESCREENAGAINTO
RETURNTHEPLAYBACKSCREEN4HEDISPLAYWILLRETURNTO
THEPLAYBACKSCREENIFYOUDONOTTOUCHTHESCREEN
FORSECONDS
8
9
1
2
3
4
5
7
6
NX404
19
Owner’s Manual
NOTE:
)FTHEINPUTTITLECHAPTERNUMBERDOESNOTEXISTOR
SEARCHINGWITHATITLECHAPTERNUMBERISNOTALLOWED
THESCREENIMAGEWILLNOTCHANGE
4OUCH[
]BUTTONTOCLOSETHEKEYPAD
BEENRECORDEDONDISCTHELANGUAGEISSPECIlEDON
THEDISC
$EPENDINGONTHEDISCSWITCHINGMAYBE
COMPLETELYIMPOSSIBLEORIMPOSSIBLEONSOME
SCENES
English
0LAYBACKSTARTSFROMTHESCENEOFTHEINPUTTITLE
NUMBERORCHAPTERNUMBER
Repeat Playback
English
4HISOPERATIONPLAYSBACKVIDEOlLESRECORDEDONTHE
DISCREPEATEDLY
4HEREPEATSETASTHEFACTORYDEFAULTIS2EPEATALL
]
3HOWINGTHEVIDEOlLESPLAYERMENUTOUCH[
BUTTON
4OUCH[
]BUTTONONCEFOR2EPEAT4RACKAGAIN
FOR2EPEAT&OLDER
]BUTTONAGAINFOR2EPEAT!LL
4OUCH[
Owner’s Manual
10
Switching Audio
11
12
13
/PTIONBUTTON
0REVIOUS4RACK&AST"ACKWARDBUTTON
0LAY0AUSEBUTTON
.EXT4RACK&AST&ORWARDBUTTON
%LAPSEDPLAYINGTIME3EEKBAR
,IST-ODEBUTTON
3YSTEMTIME
"LUETOOTHSTATUSINDICATOR
0LAYBACKINFORMATION
3HORTCUTBUTTON
2EPEATBUTTON
!UDIOBUTTON
3UBTITLEBUTTON
3OMEVIDEOlLESWILLHAVETWOORMOREAUDIOCHANNELS
YOUCANSWITCHAMONGTHEAUDIOCHANNELSDURING
PLAYBACK
4OUCH[
]BUTTONDURINGPLAYBACK
s %ACHTIMEYOUTOUCHTHEBUTTONYOUCANSWITCH
AMONGAUDIOLANGUAGES
s )TMAYTAKETIMETOSWITCHAMONGAUDIOS
$EPENDINGONTHEDISCSWITCHINGMAYBEIMPOSSIBLE
Switching Subtitles
3OMEVIDEOlLESWILLHAVETWOORMORESUBTITLESHAVE
BEENRECORDEDYOUCANSWITCHAMONGTHESESUBTITLES
DURINGPLAYBACK
4OUCHTHE[
]BUTTONTOSELECTASUBTITLEDURING
PLAYBACK
s %ACHTIMEYOUTOUCHTHEBUTTONYOUCANSWITCH
AMONGSUBTITLES
s )TMAYTAKETIMETOSWITCHAMONGSUBTITLES
$EPENDINGONTHEDISCSWITCHINGMAYBEIMPOSSIBLE
Operating Video Files Player Menu
Video Files List
9OUCANSELECTTHEBUTTONITEMSDISPLAYEDINTHE6IDEO
lLESPLAYERMENUBYDIRECTLYTOUCHINGIT
3HOWINGTHE6IDEOlLESPLAYERMENUTOUCHTHE
[
]BUTTONTODISPLAYVIDEOlLESLISTSCREEN
6IDEOlLESLISTOPERATIONSISALMOSTSAMEAS$ISC!UDIO
PLAYERMODE0LEASEREFERTO#$0LAYER/PERATIONS
Play/Pause Playback
4OUCH;
4OUCH;
=BUTTONTOPAUSEDURINGPLAYBACK
=BUTTONAGAINTORESUMEPLAYBACK
Switch to Previous/Next File
4OUCH[ ]OR[ ]BUTTONDURINGPLAYBACKTOPLAY
PREVIOUSNEXTlLE
Skip using seek bar
4OUCHTHETRIANGLEONSEEKBARANDDRAGITTOANY
POSITIONWHEREYOUWANTTOSTARTPLAYBACK
Fast Forward /Fast Backward
4OUCH[ ]OR[ ]BUTTONANDHOLDSECONDSTO
STARTFASTBACKWARDORFASTFORWARDDURINGPLAYBACK
4HEPLAYBACKSPEEDSTARTSATXTHENWILLINCREASE
TOXXANDX2ELEASETHEBUTTONWILLCONTINUE
PLAYBACKWITHNORMALSPEED
Note:
.OAUDIOISREPRODUCEDDURINGFASTFORWARDANDFAST
backward operation.
4HEFASTFORWARDANDFASTBACKWARDSPEEDMAYDIFFER
depending on the disc.
20
NX404
Play DivX Video-On-Demand Files
9OUMUSTCOMPLETEAONETIMEREGISTRATIONPROCESS
INORDERTOPLAYAPURCHASED$IV8MOVIEONYOUR$IV8
DEVICE
2EGISTRATIONISNOTNEEDEDTOPLAYFREE$IV8MOVIES
YOUCREATEORDOWNLOAD
Getting DivX Registration Code and
Registering Your Device
4OUCHTHE;3ETTINGS=BUTTONONTHE-AIN-ENUTO
ACCESS;'ENERAL=SETUPMENU
4OUCH;'ENERAL=SETUPBUTTONANDTOUCH;$)30,!9=
BUTTONONTHERIGHTSIDEOFh$IV8®2EGISTRATIONv
9OUWILLlNDhDIGIT$IV8REGISTRATIONCODEONTHE
SCREEN
English
Owner’s Manual
4OUCH;/+=TOCLOSETHEPOPUPWINDOW
English
%NTERTHISCODEIN$IV80LAYERTOCREATEA
h2EGISTRATIONVIDEOvDISCONYOUR0#/NCETHIS
h2EGISTRATIONVIDEOvDISCHASPLAYEDONTHISDEVICE
REGISTRATIONISDONEANDYOUCANENJOYSOME
PURCHASED$IV8MOVIESONYOURDEVICE
For detail please visit “http://www.divx.com/vod”
MPlLES
s FORMAT-0%'6ISUAL3IMPLE ,
s 0ICTURESIZEX
s !UDIOFORMAT!!#
s !UDIOSAMPLINGFREQUENCY+(Z
MPGlLES
sFORMAT-0%'
s 0ICTURESIZEX
s !UDIOFORMAT-0
s !UDIOSAMPLINGFREQUENCY+(Z
DIVXlLES
s FORMAT$IVX
s 0ICTURESIZEX
s !UDIOFORMAT-0
s !UDIOSAMPLINGFREQUENCY+(Z
Note:
After you register your device, this setting menu is
changed to “DivX® Deregistration”
Deregister your device
%VENAFTERYOUHAVElNISHEDREGISTRATIONYOU
CANDEREGISTERYOURDEVICEIFYOUWILLNOTWATCH
PURCHASEDMOVIESONTHISDEVICEANYMORE
4OUCHTHE;3ETTINGS=BUTTONONTHE-AIN-ENUTO
ACCESS;'ENERAL=SETUPMENU
4OUCH;'ENERAL=SETUPBUTTONANDTOUCH;3%4=
BUTTONONTHERIGHTSIDEOFh$IV8®$EREGISTRATIONv
9OUWILLBEASKEDIFYOUWANTTODEREGISTERTHIS
DEVICETHENTOUCH;9%3=INTHEPOPUPSCREEN
.OTEDIGITh$EREGISTRATIONCODEvINTHEPOPUP
SCREEN+EEPTHISCODEUNTILYOUDEREGISTERTHIS
DEVICEONYOUR0#
$EREGISTERTHISDEVICEBYUSINGTHEh$EREGISTRATION
CODEvONYOUR0#
For detail please visit “http://www/divx.com/vod”
Playable Video Disc Formats
4HISSYSTEMCANPLAYVIDEOlLESSTOREDONDISC
AVIlLES
s FORMAT$IVX
s 0ICTURESIZEX
s!UDIOFORMAT-0
s!UDIOSAMPLINGFREQUENCY+(Z
NX404
21
English
8. CD PLAYER OPERATIONS
Listening to a Disc/Ejecting a Disc
Owner’s Manual
0LEASEREFERTO$ISC6IDEO0LAYER/PERATIONSWATCHING
TOADISCAND%JECTINGADISC
3ONG4ITLE
!RTISTALBUM)NFORMATION
#LOSEOPTIONMENU"UTTON
Showing CD Player Mode Screen
Operate the CD Player Menu
!FTERDISCISLOADEDTHEPLAYMODEISAUTOMATICALLY
ENGAGED
)FDISCHAVEBEENLOADEDYOUCANTOUCH[Disc Audio]
BUTTONONMAINMENUTODISPLAY#$PLAYERMODE
SCREEN
9OUCANSELECTTHEBUTTONITEMSDISPLAYEDINTHE#$
PLAYERMENUBYDIRECTLYTOUCHINGITINLIST
8
6
5
4
9
12
1
4OUCH[
4OUCH[
]BUTTONTOPAUSEDURINGPLAYBACK
]BUTTONAGAINTORESUMEPLAYBACK
Switch to Previous/Next file or track
7
10
Play/Pause Playback
4OUCH[ ]OR[ ]BUTTONDURINGPLAYBACKTOPLAY
PREVIOUSNEXTlLE
s 4OUCHING[ ]BUTTONSTARTSPLAYBACKFROMTHE
BEGINNINGOFTHENEXTTRACK
s 4OUCHING[ ]BUTTONSTARTSPLAYBACKFROMTHE
BEGINNINGOFTHECURRENTTRACK7HENTHISBUTTONIS
TOUCHEDAGAINWITHINSECONDSPLAYBACKSTARTS
FROMTHEBEGINNINGOFPREVIOUSTRACK
Fast Forward /Fast Backward
11
2
3
16
13
4OUCH[ ]OR[ ]BUTTONANDHOLDMORETHAN
SECONDSTOSTARTFASTBACKWARDORFASTFORWARD
DURINGPLAYBACK4HEPLAYBACKSPEEDSTARTSATX
THENWILLINCREASETOXXANDX2ELEASETHE
BUTTONWILLCONTINUEPLAYBACKWITHNORMALSPEED
Note:
4HEFASTFORWARDANDFASTBACKWARDSPEEDMAYDIFFER
depending on the disc.
14
15
Repeat Playback
4HEREPEATSETASTHEFACTORYDEFAULTIS2EPEAT!LL
4OUCH[ ]BUTTONSWITCHBETWEEN2EPEAT&OLDER
2EPEAT!LLAND2EPEAT4RACK
18
17
/PTIONBUTTON
%LAPSEDPLAYINGTIMEINDICATOR
2OTATIONEFFECT
0AGE4URNINGBUTTON
3YSTEMTIME
"LUETOOTHSTATUSINDICATOR
2EPEATBUTTON
0REVIOUS4RACK&AST"ACKWARDBUTTON
3HORTCUTBUTTON
0LAY0AUSEBUTTON
.EXT4RACK&AST&ORWARDBUTTON
3HUFmEBUTTON
$IRECT3EARCHINGBUTTON
3CAN3TART3TOPBUTTON
2OTATION%FFECT/N/FFBUTTON
22
NX404
Shuffle Playback
4OUCH;; =BUTTONTOSHUFmETHETRACKSDURING
PLAYBACK
4OUCHTHISBUTTONAGAINTOTURNOFFTHEFEATURE
Selecting a track on the Track List Screen
4HISFUNCTIONALLOWSYOUTOSELECTTRACKSFROMA
DISPLAYEDLIST
4OUCHTHETRACKTITLEONTHEDISPLAYLIST4HESELECTED
TRACKWILLSTARTPLAYING
7HENTHEDESIREDTRACKISNOTDISPLAYEDTOUCHAND
mICKTHETRACKLISTUPORDOWN
4OUCHTHEDESIREDTRACKTITLEBUTTON4HE
CORRESPONDINGTRACKISSTARTEDPLAYBACK
Note:
Displaying MP3/WMA/AAC TAG titles
4AGINFORMATIONCANBEDISPLAYEDFORCOMPRESSED
AUDIOlLECONTAINING4AGINFORMATION
-0TITLEARTISTALBUM
7-!ARTIST
!!#CANNOTDISPLAYTAGINFORMATION
Searching with the Track Number
Precautions when creating MP3 disc
4HISOPERATIONALLOWSSEARCHINGUSINGTHETRACK
NUMBERSRECORDEDONTHE#$S
]BUTTON
4OUCH[ ]BUTTONTOSHOW[
]BUTTON4HENUMERICALKEYPADWILL
4OUCH[
APPEARONTHESCREENANDTOUCH;;
=BUTTON
)NPUTTHETRACKNUMBERTHATYOUWANTTOPLAYBACK
WITH[0]TO[9]KEYANDTOUCH;/+=BUTTON
0LAYBACKSTARTSFROMTHETRACKOFTHEINPUTTRACK
NUMBER
s )FTHEINPUTTRACKNUMBERDOESNOTEXISTORSEARCHING
WITHTRACKNUMBERISNOTALLOWEDTHESCREENIMAGE
WILLNOTCHANGE
]BUTTONWILLCLOSETHENUMERICAL
s 4OUCHTHE[
KEYPAD
s 4OUCH[ ]BUTTONWILLCLOSETHEOPTIONWINDOWAND
DISPLAYPLAYBACKSCREEN
s &ILEEXTENSIONS
!LWAYSADDAlLEEXTENSIONh-0vORhMPvTO
AN-0lLEANDh7-!vORhWMAvTOA7-!AND
hMAvTOA!!#lLEBYUSINGSINGLEBYTELETTERS
)FYOUADDAlLEEXTENSIONOTHERTHANSPECIlEDOR
FORGETTOADDTHESElLEEXTENSIONTHElLECANNOTBE
PLAYED)NADDITIONIFYOUUSEUPPERCASEANDLOWER
CASELETTERSCAPITALANDSMALLLETTERSMIXEDFORlLE
EXTENSIONSNORMALPLAYMAYNOTBEPOSSIBLE
&ILESOTHERTHAN-07-!!!#DATACANNOTBE
PLAYED
0LAYINGlLESWITHAFORMATNOTSUPPORTEDWILLBE
SKIPPEDANDTHESCANRANDOMANDREPEATPLAYBACK
MODEMAYBECANCELED
s &ILEAND$ISC.OT3UPPORTED
&ILESANDDISCSWITHFOLLOWINGEXTENSIONSARENOT
SUPPORTED
!!#
$,&
-5
0,3
-002/
lLESlLESWITH$2-OPENSESSIONDISCS
s ,OGICALFORMAT&ILESYSTEM
7HENWRITINGAN-07-!!!#lLEONADISC
PLEASESELECTh)3/LEVELORLEVELWITHOUT
INCLUDINGEXPANSIONFORMATvASTHEWRITINGSOFTWARE
FORMAT.ORMALPLAYBACKMAYNOTBEPOSSIBLEIFTHE
DISCISRECORDEDONANOTHERFORMAT
4HEFOLDERNAMEANDlLENAMECANBEDISPLAYEDAS
THETITLEDURING-07-!!!#PLAY
s %NTERING&ILEAND&OLDER.AMES
.AMESUSINGTHECODELISTCHARACTERSARETHEONLY
lLENAMESANDFOLDERNAMESTHATCANBEENTEREDAND
DISPLAYED5SINGANYOTHERCHARACTERWILLCAUSETHElLE
ANDFOLDERNAMESTOBEDISPLAYEDINCORRECTLY
s &OLDERSTRUCTURE
!DISCWITHAFOLDERHAVINGMORETHANHIERARCHICAL
LEVELSWILLCONmICTWITHTHE)3/ANDPLAYBACK
WILLBEIMPOSSIBLE
s .UMBEROFlLESORFOLDERS
4HEMAXIMUMALLOWABLENUMBEROFFOLDERSIS
INCLUDINGROOTDIRECTORYTHEMAXIMUMALLOWABLE
NUMBEROFlLESISMAXPERFOLDER4HIS
REPRESENTSTHEMAXIMUMNUMBEROFTRACKSTHATCAN
BEPLAYEDBACK
Rotation Effect On/Off
4HISOPERATIONALLOWSTURNONTURNOFFROTATIONEFFECT
4HEFACTORYDEFAULTIS/N
4OUCH[ ]BUTTONTOSHOW[Rotation effect]BUTTON
]BUTTONWILLTURNONTHE2OTATIONEFFECT
4OUCH[
]BUTTONWILLTURNOFFTHE2OTATIONEFFECT
4OUCH[
Listening to Compressed Audio
4HISSYSTEMCANPLAYAUDIOlLESSTOREDONDISC
-07-!!!#
Tag Display Function
4HISUNITISAN)$4AGCOMPATIBLEMODEL
NX404
23
Owner’s Manual
s3OME#$SRECORDEDON#$227MODEMAYNOTBE
usable.
English
4OUCH[ ]BUTTONTOSHOW[Scan
]BUTTON
]BUTTONDURINGPLAYBACK
4OUCH[Scan
s )TWILLPLAYFROMNEXTTRACKANDEACHTRACKWILL
DISPLAYFORSECONDS
]BUTTONWILLSWITCHTO[Scan
]
s 4HE[Scan
BUTTON
]BUTTON
4OUCH[Scan
s )TWILLCONTINUEPLAYBACKFROMCURRENTTRACK
]BUTTONWILLSWITCHTO[Scan
]
s [Scan
BUTTON
4HEFUNCTIONWILLSCANALLTRACKSORDERLYINCURRENT
FOLDERONCE!FTER3CANSTOPPEDPLAYBACKWILL
CONTINUE
4HISUNITSUPPORTSTHE)$4!'SOFTHE6ERSION
AND
)NDISPLAYINGTHISUNITGIVESPRIORITYTOTHE6ERSION
AND4!'S
English
Scanning the Tracks
English
Owner’s Manual
4RACKSAREPLAYEDINTHEORDERTHATTHEYWERE
RECORDEDONTOADISC4RACKSMIGHTNOTALWAYSBE
PLAYEDINTHEORDERDISPLAYEDONTHE0#
s 3OMENOISEMAYOCCURDEPENDINGONTHETYPEOF
ENCODERSOFTWAREUSEDWHILERECORDING
s )NCASEOFATRACKRECORDEDAT6"2VARIABLEBITRATE
THEDISPLAYFORTHEPLAYTIMEOFTHETRACKMAYBE
SLIGHTLYDIFFERENTFROMTHEACTUALPLAYTIME!LSOTHE
RECOMMENDEDVALUEOF6"2RANGESFROMKBPSTO
KBPS
s !FTERDISCSELECTIONTHEPLAYMODEISAUTOMATICALLY
ENGAGED
Playback MP3/WMA/AAC menu
1
2
2EPEAT0LAYBACK
7HILEPLAYING-07-!!!#TOUCH BUTTONCAN
SWITCHBETWEEN2EPEAT&OLDER2EPEAT!LLAND2EPEAT
4RACK2EPEAT&OLDERAND2EPEAT!LL
#URRENT&OLDER
s3HOWINGTITLEOFCURRENTFOLDER
s4HENUMBERONTHEFOLDERSYMBOLISTHENUMBEROF
lLESANDFOLDERSNUMBERINCURRENTFOLDER
s4OUCHTHETITLEOFCURRENTFOLDERPLAYLISTWILLSHOW
lLESANDFOLDERSINUPPERFOLDER
*Other operations about playing MP3/WMA/AAC are
almost same as CD Player mode.
3TOP0LAYBACK
]BUTTONTOSTOPPLAYBACK
4OUCH[
]BUTTONAGAINTORESUMEPLAYBACK
4OUCH[
0LAYBACKRESUMESFROMSTARTOFTHEFOLDERWHICH
PLAYINGTRACKISIN
s/THEROPERATIONSABOUTPLAYING-07-!!!#ARE
ALMOSTSAMEAS#$0LAYERMODE
24
NX404
English
English
9. USB AUDIO OPERATIONS
Notes on the Tag titles
4HELIMITATIONSONTHE4AGTITLESARESAMEASTHOSEIN
#$0LAYERMODE
Note:
s4HISSYSTEMWILLNOTOPERATEORMAYOPERATEIMPROPERLY
with some USB memory.
#ONNECTYOUR53"MEMORYWITH-0lLES7-!!!#
&,!#lLESTOTHE53"CONNECTOR4HESYSTEMWILL
AUTOMATICALLYDETECTTHECONNECTEDDEVICEANDTHE
[USB Audio]BUTTONONMAINMENUWILLBEENABLED
s 7HENAN53"MEMORYISALREADYCONNECTED
4OUCH[USB Audio]BUTTONTOSELECTTHE53"!UDIO
MODE
4HESYSTEMCHANGESTOTHE53"!UDIOMODEAND
STARTSPLAYBACKFROMTHEPREVIOUSPOSITIONORFROMTHE
BEGINNING
s&ILESPROTECTEDWITHANY$2-CANNOTBEPLAYED
Notes on Using USB Memories
General notes
s 7HENNOSUPPORTlLESTHElLELISTDISPLAYNOTHING
.OTESONTHE!UDIOlLES
s4HISSYSTEMCANPLAYTHE-07-!!!#&,!#lLES
STOREDINTHE53"MEMORY
-0lLES
s FORMAT-0%'!UDIOLAYER
s BITRATEK^KBPS
sSAMPLINGFREQUENCY+(Z
slLEEXTENSIONMP
7-!lLES
s FORMAT7INDOWSMEDIA!UDIOSTANDARD,
PROlLE
s BITRATE^+(Z
s SAMPLINGFREQUENCY+(Z
s lLEEXTENSIONWMA
!!#lLES
sFORMAT!DVANCED!UDIO#ODING,#!!#(%
!!#
s SAMPLINGFREQUENCY+(Z
s lLEEXTENSIONMA
&,!#lLES
s FORMAT&REE,OSSLESS!UDIO#ODEC
s QUANTIZATIONBITRATEORBITS
s SAMPLINGFREQUENCY^+(Z
s lLEEXTENSIONmAC
.OTESONTHEFOLDERSTRUCTURE
s 4HEFOLDERHIERARCHYMUSTBEWITHINHIERARCHICAL
LEVELS/THERWISEPLAYBACKMAYBEIMPOSSIBLE
s 4HEMAXIMUMALLOWABLENUMBEROFFOLDERSIS
INCLUDINGROOTDIRECTORYANDFOLDERSWITHNO-0
lLES7-!!!#&,!#lLE
s 4HEMAXIMUMALLOWABLENUMBEROFlLESINAFOLDER
IS
s 9OUCANSTORETHE-0lLES7-!!!#&,!#
TOGETHERINAFOLDER
s 4HESYSTEMMAYBECOMESLOWIFTHElLESORFOLDERS
EXCEEDTHELIMITATIONABOVE
Select USB Audio Mode
Note:
4HISSYSTEMHASTWO53"CONNECTORSANDCANCONNECT
two USB.
You can select the desired USB by touching the list of
USB root menu.
4HISSYSTEMINDICATETHE53"ASh-Y53"vh-Y53"v
on the list.
12
13
11
10
14
15
16
17
9
1
3
2
5
6
4
7
8
18
19
/PTIONBUTTON
0LAY0AUSEBUTTON
0REVIOUS4RACK&AST"ACKWARDBUTTON
.EXT4RACK&AST&ORWARDBUTTON
NX404
25
Owner’s Manual
4HISSYSTEMCANPLAYAUDIOlLES-07-!!!#
&,!#STOREDINAN53"MEMORYWHICHISRECOGNIZED
ASh53"-ASS3TORAGE#LASSDEVICEv9OUCANUSE
YOUR53"MEMORYASANAUDIODEVICEBYSIMPLY
COPYINGDESIREDAUDIOlLESINTOIT
English
Owner’s Manual
2EPEATBUTTON
3HUFmEBUTTON
-0lLES7-!lLESINLIST
&OLDERSINLIST
0AGETURNINGBUTTON
3YSTEMTIME
"LUETOOTHSTATUSINDICATOR
-UTESTATUSINDICATOR
0LAYBACKSTATUSINFORMATION
!LBUM!RT
3HORTCUTBUTTON
#URRENT)$INFOAREA
%LAPSEDPLAYINGTIMEINDICATOR3EEKBAR
$IRECTBUTTON
3CANBUTTON
Playing Audio Files in USB Memory
Play/Pause Playback
4OUCH[
4OUCH[
]BUTTONTOPAUSEDURINGPLAYBACK
]BUTTONAGAINTORESUMEPLAYBACK
Switch to Previous/next file
4OUCH[
]OR[ ]BUTTONDURINGPLAYBACKTOPLAY
PREVIOUSNEXTlLE
s 4OUCH[ ]BUTTONTOSTARTPLAYBACKFROMTHE
BEGINNINGOFTHENEXTTRACK
s 4OUCH[
]BUTTONTOSTARTPLAYBACKFROMTHE
BEGINNINGOFTHECURRENTTRACKWHENTHISBUTTONIS
TOUCHEDAGAINWITHINABOUTSECONDSPLAYBACK
STARTSFROMTHEBEGINNINGOFPREVIOUSTRACK
Fast Forward /Fast Backward
4OUCH [
]OR[ ]BUTTONANDHOLDMORETHAN
SECONDSTOSTARTFASTBACKWARDORFASTFORWARD
DURINGPLAYBACK4HEPLAYBACKSPEEDSTARTSATX
THENWILLINCREASETOXXANDX2ELEASETHE
BUTTONWILLCONTINUEPLAYBACKWITHNORMALSPEED
Note:
4HEFASTFORWARDANDFASTBACKWARDSPEEDMAYDIFFER
depending on the audio files.
Repeat Playback
4HEREPEATSETASTHEFACTORYDEFAULTIS2EPEAT!LL
4OUCHTHE[ ]BUTTONONCEFOR2EPEAT4RACKAGAINFOR
2EPEAT&OLDER2EPEAT!LL
Shuffle Playback
4OUCH[ ]BUTTONTOSHUFmETHETRACKSINPLAYING
FOLDERDURINGPLAYBACK
4OUCHTHISBUTTONAGAINTOTURNOFFTHEFEATURE
Album Art work
)FCURRENTAUDIOlLECONTAINSALBUMARTIMAGEIN)$
THEPICTUREWILLBEDISPLAYEDINTHISAREA
ID3 Information Area
4HISAREADISPLAY)$INFORMATIONOFPLAYINGlLESONG
TITLEARTISTINFORMATIONALBUMINFORMATIONNUMBER
OFCURRENTlLETOTALNUMBERINCURRENTFOLDERELAPSED
PLAYINGTIMETOTALTIMEOFCURRENTlLE
Skip Using Seek Bar
4OUCH ONSEEKBARANDDRAGITTOANYPOSITIONWHERE
YOUWANTTOSTARTPLAYBACK
26
NX404
Select a Folder on Display List
4OUCHTHEFOLDERTITLEONTHEDISPLAYLISTTHEDISPLAYLIST
WILLDISPLAYlLESANDFOLDERSINSELECTEDFOLDER
Selecting a Track on the Display List
4HISFUNCTIONALLOWSYOUTOSELECTTRACKSFROMA
DISPLAYEDLIST
4OUCHTHETRACKTITLEONTHEDISPLAYLIST4HESELECTED
TRACKWILLSTARTPLAYING
7HENTHEDESIREDTRACKISNOTDISPLAYEDTOUCHAND
mICKTHETRACKLISTUPORDOWN
4OUCHTHEDESIREDTRACKTITLEBUTTON4HE
CORRESPONDINGTRACKISSTARTEDPLAYBACK
Scanning the Tracks
4OUCH[ ]BUTTONTOSHOW[Scan
]BUTTON
4OUCH[Scan
]BUTTONDURINGPLAYBACK
s )TWILLPLAYFROMNEXTTRACKANDEACHTRACKWILL
DISPLAYFORSECONDS
s 4HE[Scan
]BUTTONWILLSWITCHTO[Scan
]
BUTTON
4OUCH[Scan
]BUTTON
s )TWILLCONTINUEPLAYBACKFROMCURRENTTRACK
]BUTTONWILLSWITCHTO[Scan
]
s [Scan
BUTTON
4HEFUNCTIONWILLSCANALLTRACKSORDERLYINCURRENT
FOLDERONCE!FTER3CANSTOPPEDPLAYBACKWILL
CONTINUE
Searching With the Track Number
4HISOPERATIONALLOWSSEARCHINGTOUSETHETRACK
NUMBERSINPLAYINGFOLDER
4OUCH[ ]BUTTONTOSHOW[
]BUTTON
4OUCH[
]BUTTON4HENUMERICALKEYPADWILL
APPEARONTHESCREEN
)NPUTTHETRACKNUMBERTHATYOUWANTTOPLAYBACK
WITH[0]TO[9]KEYANDTOUCH;/+=BUTTON
0LAYBACKSTARTSFROMTHETRACKOFTHEINPUTTRACK
NUMBER
s )FTHEINPUTTRACKNUMBERDOESNOTEXISTORSEARCHING
WITHATRACKNUMBERISNOTALLOWEDTHESCREENIMAGE
WILLNOTCHANGE
s 4OUCH[
]BUTTONWILLCLOSETHENUMERICALKEYPAD
s 4OUCH[ ]BUTTONWILLCLOSETHEOPTIONWINDOWAND
DISPLAYPLAYBACKSCREEN
s 4HISSYSTEMWILLNOTOPERATEORMAYOPERATEIMPROPERLY
with some USB memory.
s &ILESPROTECTEDWITHANY$2-CANNOTBEPLAYED
Notes on Using USB Memories
General notes
7HENNOSUPPORTlLESTHElLELISTDISPLAYNOTHING
.OTESONTHEFOLDERSTRUCTURE
4HELIMITATIONSONTHEFOLDERSTRUCTUREARESAMEAS
THOSEIN53"!UDIO0LAYERMODE
Notes on the Tag titles
4HELIMITATIONSONTHE4AGTITLESARESAMEASTHOSEIN
#$0LAYERMODE
Select USB Video Mode
#ONNECTYOUR53"MEMORYWITHVIDEOlLESTOTHE53"
CONNECTOR4HESYSTEMWILLAUTOMATICALLYDETECTTHE
CONNECTEDDEVICEANDTHE[USB Video]BUTTONON
MAINMENUWILLBEENABLED
s 7HENAN53"MEMORYISALREADYCONNECTED
4OUCH[USB Video]BUTTONONMAINMENUTOSELECTTHE
53"6IDEOMODE
4HESYSTEMCHANGESTOTHE53"6IDEOMODEAND
STARTSPLAYBACKFROMTHEPREVIOUSPOSITIONORFROMTHE
BEGINNING
Playable Video Format
MPlLES
sFORMAT-0%'6ISUAL
-0%'!6#(
s0ICTURESIZE8-0%'6ISUAL
X-0%'!6#
s!UDIOFORMAT!!#
s!UDIOSAMPLINGFREQUENCY+(Z
MVlLES
sFORMAT-0%'6ISUAL
-0%'!6#(
s0ICTURESIZEX
s!UDIOFORMAT!!#
s!UDIOSAMPLINGFREQUENCY+(Z
MPGlLES
sFORMAT-0%'
s0ICTURESIZEX
s!UDIOFORMAT-0
s!UDIOSAMPLINGFREQUENCY+(Z
GPlLES
sFORMAT-0%'6ISUAL
(
s!UDIOFORMAT!!#!-2
s!UDIOSAMPLINGFREQUENCY+(Z
9
8
7
10
Note:4HISSYSTEMHASTWO53"CONNECTORSANDCAN
connect two USB.
You can select the desired USB by touching the list of
USB root menu.
4HISSYSTEMINDICATETHE53"ASh-Y53"vh-Y53"v
on the list.
Playing Video Files in USB Memory
)FTHEVIDEOISPLAYINGTOUCHTHESCREENOFTHEPLAYING
VIDEOTODISPLAY/PERATIONBUTTONS
4HEDISPLAYWILLRETURNTOTHEPLAYBACKSCREENIFYOU
DONOTTOUCHTHESCREENFORSECONDS
1
2
3
4
5
6
0REVIOUS4RACK&AST"ACKWARDBUTTON
0LAY0AUSEBUTTON
.EXT4RACK&AST&ORWARDBUTTON
%LAPSEDPLAYINGTIMEINDICATOR3EEKBAR
-ENU,IST
2EPEATBUTTON
3YSTEMTIME
"LUETOOTHSTATUSINDICATOR
0LAYBACKINFORMATION
3HORTCUTBUTTON
Play/Pause Playback
4OUCH[
4OUCH[
]BUTTONTO0AUSEPLAYBACK
]BUTTONTORESUMEPLAYBACK
NX404
27
Owner’s Manual
Note:
English
4HISSYSTEMCANPLAY53"VIDEOlLES-0'0ETC
STOREDINAN53"MEMORYWHICHISRECOGNIZEDAS
h53"-ASS3TORAGE#LASSDEVICEv9OUCANUSEYOUR
53"MEMORYASANVIDEODEVICEBYSIMPLYCOPYING
DESIREDVIDEOlLESINTOIT
English
10. USB VIDEO OPERATIONS
Switch to Previous/next file
English
Owner’s Manual
4OUCH[ ]OR[ ]BUTTONDURINGPLAYBACKTOPLAY
PREVIOUSNEXTlLE
s 4OUCH[ ]BUTTONTOSTARTSPLAYBACKFROMTHE
BEGINNINGOFTHENEXTTRACK
s 4OUCH[ ]BUTTONTOSTARTSPLAYBACKFROMTHE
BEGINNINGOFTHECURRENTTRACKWHENTHISBUTTONIS
TOUCHEDAGAINWITHINABOUTSECONDSPLAYBACK
STARTSFROMTHEBEGINNINGOFPREVIOUSTRACK
Repeat Playback
4HEREPEATSETASTHEFACTORYDEFAULTIS2EPEAT!LL
]BUTTONONCEFOR2EPEAT4RACKAGAIN
4OUCHTHE[
FOR2EPEAT&OLDERAGAINFOR2EPEAT!LL
Skip Using Seek Bar
4OUCHTHE ONSEEKBARANDDRAGITTOANYPOSITION
WHEREYOUWANTTOSTARTPLAYBACK
Switching USB Video Menu
4OUCH [
]BUTTONPLAYBACKWILLBEPAUSEDANDTHE
SCREENWILLSWITCHTO53"6IDEO,IST
11
10
9
8
!LBUM!RT
3HORTCUTBUTTON
#URRENTlLEINFORMATIONAREA
%LAPSEDPLAYINGTIMEINDICATOR3EEKBAR
$IRECTBUTTON
3CANBUTTON
Play/Pause Playback
/N53"6IDEOMENUSCREENPLAYBACKSTATUSIS
PAUSE
4OUCH[
]BUTTONTORESUMEPLAYBACK4HESCREEN
WILLGOTOVIDEOSCREENAUTOMATICALLY
Switch to Previous/next file
4OUCH [
]OR[
]BUTTONDURINGPLAYBACKTOPLAY
PREVIOUSNEXTlLE
s 4OUCH [
]BUTTONTOSTARTSPLAYBACKFROMTHE
BEGINNINGOFTHENEXTTRACK
s 4OUCH [
]BUTTONTOSTARTSPLAYBACKFROMTHE
BEGINNINGOFTHECURRENTTRACKWHENTHISBUTTONIS
TOUCHEDAGAINWITHINABOUTSECONDSPLAYBACK
STARTSFROMTHEBEGINNINGOFPREVIOUSTRACK
Repeat Playback
12
4HEREPEATSETASTHEFACTORYDEFAULTIS2EPEAT!LL
4OUCHTHE[ ]BUTTONONCEFOR2EPEAT4RACKAGAINFOR
2EPEAT&OLDERAGAINFOR2EPEAT!LL
13
Shuffle Playback
4OUCH[ ]BUTTONTOSHUFmETHETRACKSINPLAYING
FOLDERDURINGPLAYBACK
4OUCHTHISBUTTONAGAINTOTURNOFFTHEFEATURE
14
15
3
Current File Information Area
1
2
5
6
4
7
4HISAREADISPLAYSINFORMATIONOFCURRENTVIDEOlLElLE
NAMENUMBEROFCURRENTlLETOTALNUMBERINCURRENT
FOLDER%LAPSEDPLAYINGTIMETOTALTIMEOFCURRENTlLE
Skip Using Seek Bar
4OUCH ONSEEKBARANDDRAGITTOANYPOSITION
WHEREYOUWANTTOSTARTPLAYBACK
16
17
Select a Folder on Display List
4HISOPERATIONISSAMEASTHISIN53"!UDIOMODE
Selecting a Track on the Display List
4HISOPERATIONISSAMEASTHISIN53"!UDIOMODE
/PTIONBUTTON
0LAY0AUSEBUTTON
0REVIOUS4RACK&AST"ACKWARDBUTTON
.EXT4RACK&AST&ORWARDBUTTON
2EPEATBUTTON
3HUFmEBUTTON
6IDEOlLESINLIST
3YSTEMTIME
"LUETOOTHSTATUSINDICATOR
-UTESTATUSINDICATOR
0LAYBACKSTATUSINFORMATION
28
NX404
Scanning the Tracks
4HISOPERATIONISSAMEASTHISIN53"!UDIOMODE
Searching with the Track Number
4HISOPERATIONISSAMEASTHISIN53"!UDIOMODE
4. During iOS device is connected by Bluetooth, and
SELECTTHEI0ODMODETHEVOLUMELEVELISCONTROLLEDBY
only iOS device.
5. During iOS device is connected by Bluetooth, Album
JACKETIMAGEISNOTDISPLAYED
Note:
s4HISSYSTEMWILLNOTOPERATEORMAYOPERATEIMPROPERLY
with unsupported versions.
s&ORDETAILEDINFORMATIONONTHEPLAYABLEI0ODI0HONE
models, see our home page: www.clarion.com
Notes on using iPod/iPhone
s $ONOTCONNECTANI0ODI0HONETOTHISUNITWITHA
HEADPHONECONNECTEDTOTHEI0ODI0HONE
s !FTERTHEI0ODI0HONEHASBEENCONNECTEDTOTHIS
UNITTHEBUTTONSOFI0ODAREDISABLEDFOROPERATION
INTHE-USICMODE)NTHE6IDEOMODEDONOT
OPERATETHEBUTTONSOFI0OD
s 7HENINTHEI0ODMODETHESCREENIMAGEINPUT
FROMTHE!58TERMINALISOUTPUTTOTHEREARMONITOR
s 7HENNODATAISPRESENTTHETITLEDISPLAYWILLREMAIN
BLANK
s 3ETTHELANGUAGESETTINGOFI0ODI0HONETO%NGLISH
BEFORECONNECTINGYOURI0ODI0HONE3OME
CHARACTERSOFTHEOTHERLANGUAGESMAYNOTBE
DISPLAYEDCORRECTLYINTHISSYSTEM
4HEPLAYBACKSTARTSAFTERAWHILEFROMWHERETHEI0OD
I0HONEHASBEENPAUSED
s 7HENI0ODI0HONEISALREADYCONNECTED
]BUTTONONTHE-AIN-ENU
4OUCHTHE[
SCREEN4HESYSTEMCHANGESTOTHEI0ODMODEAND
STARTSPLAYBACKFROMTHEPREVIOUSPOSITION
iPod Audio ID3 Information
12
11
10
s0RECAUTIONSONBATTERYCONSUMPTION
)FTHEI0ODI0HONEISCONNECTEDTOTHISUNITWHENTHE
INTERNALBATTERYOFI0ODI0HONEHASRUNDOWNTHIS
FUNCTIONMAYNOTOPERATECORRECTLY9OUMUSTCONNECT
THEI0ODI0HONEAFTERCHARGINGTHEBATTERYIFITHASRUN
DOWN
iPod Audio Menu Operations
#ONNECTYOURI0ODI0HONETOTHE53"CONNECTOR
4HESYSTEMWILLAUTOMATICALLYDETECTTHECONNECTED
DEVICEANDTHEI0OD!UDIOBUTTONWILLBEENABLEDFOR
OPERATIONONTHE-AIN-ENUSCREEN
Note:
4HISSYSTEMHASTWO53"CONNECTORSPLEASE
CONNECTTOTHE53"WITHTHELABELOFhI0ODI0HONEv"Y
CONNECTINGANOTHER53"CABLEI0ODI0HONECANTPLAY
back the music.
7HENI/3DEVICEISCONNECTEDVIABOTH53"AND
"LUETOOTHATTHESAMETIMEANDSELECTI0ODMODEI/3
device is controlled by USB connecton.
7HENTHEI0ODMODEANDOPERATETHEAUDIOPLAYER
9
13
14
15
4
1
2
5
3
6
7
8
/PTIONBUTTON
2EPEATBUTTON
3HUFmEBUTTON
0REVIOUS4RACK&AST"ACKWARDBUTTON
0LAY0AUSEBUTTON
.EXT4RACK&AST&ORWARDBUTTON
)$)NFORMATION
NX404
29
English
ORINTERNETRADIOOTHERTHANI0ODTHEREISACASETHAT
I0ODDOESNTPLAYBACKCORRECTLY0LEASEDONTOPERATE
THEAUDIOPAYERORINTERNETRADIOOTHERTHAN0ANDORA
WHENTHE0ANDORAMODE
Owner’s Manual
I0ODI0HONECANBECONNECTEDBYUSINGTHE
CONNECTORCABLESUPPLIEDWITHTHEI0ODI0HONEBUTIN
THISCASEYOUCANENJOYITSAUDIOSOUNDONLY4OENJOY
VIDEOMOVIESSTOREDINTHEI0ODI0HONEWITHVIDEO
DISPLAYINGTHEMONTHISUNITITISREQUIREDTOUSETHE
SPECIALCONNECTORCABLE##!SEPARATELYSOLD
(OWEVERTHENEWPRODUCTSSUCHASI0HONEI0HONE
SANDI0HONECI0ODTOUCH®THGENERATIONAND
I0ODNANO®THGENERATIONONLYCANCONNECTPIN
CABLENOVIDEOSIGNALOUTPUTSOTHESENEWPRODUCTS
CANNOTDISPLAYVIDEOINVIDEOMODE
English
11. iPod OPERATIONS
iPod Audio Playlist Mode Screen
English
Owner’s Manual
.EXT0AGE;
=0REVIOUS0AGE;
#ATEGORYLIST
3YSTEMTIME
"LUETOOTHSTATUSINDICATOR
0LAYBACKSTATUSINDICATOR
!RTWORK
3HORTCUTBUTTON
0ROGRESSBAR
=BUTTON
1
Play/Pause Playback
4OUCH[
4OUCH[
]BUTTONTOPAUSEDURINGPLAYBACK
]BUTTONAGAINTORESUMEPLAYBACK
Switch to Previous/next file
s4OUCH [ ]OR[ ]BUTTONDURINGPLAYBACKTOPLAY
PREVIOUSNEXTlLE
s4OUCH [ ]BUTTONTOSTARTSPLAYBACKFROMTHE
4OUCHOFTHENEXTTRACK
s4OUCH [ ]BUTTONTOSTARTSPLAYBACKFROMTHE
BEGINNINGOFTHECURRENTTRACKWHENTHISBUTTONIS
TOUCHEDAGAINWITHINABOUTSECONDSPLAYBACK
STARTSFROMTHEBEGINNINGOFPREVIOUSTRACK
2
3
3WITCHTOINFORMATIONBUTTON
0LAYINGLIST
0AGETURNINGBUTTON
4
5
Fast Forward /Fast Backward
4OUCH [ ]OR[ ]BUTTONANDHOLDMORETHAN
SECONDSTOSTARTFASTBACKWARDORFASTFORWARDDURING
PLAYBACK
Note:
4HEFASTFORWARDANDFASTBACKWARDSPEEDMAYDIFFER
depending on the audio files.
Repeat Playback
DEPENDONI0OD
]BUTTONONCEFOR2EPEAT4RACKAGAIN
4OUCHTHE[
FOR2EPEAT!LLAGAINFOR2EPEAT/FF
Shuffle Playback
4OUCH[
]BUTTONTOSHUFmETHETRACKSINPLAYING
FOLDERDURINGPLAYBACK
4OUCHTHISBUTTONAGAINTOTURNOFFTHEFEATURE
Album Art work
)FCURRENTAUDIOlLECONTAINSALBUMARTIMAGEIN)$
THEPICTUREWILLBEDISPLAYEDINTHISAREA
ID3 Information Area
4HISAREADISPLAY)$INFORMATIONOFPLAYINGlLE
SONGTITLEARTISTINFORMATIONALBUMINFORMATION
'ENREPLAYLISTANDRELEASETIME
Category List
3ELECTDIFFERENTCATEGORYSONGSTOPLAY4HE
CATEGORYISSAMEASTHEI0ODI0HONE
30
NX404
6
"ACKTOFATHERFOLDER
#LOSETHELISTMODE
3EARCHWITHTHElRSTALPHABETINCURRENTLIST
iPod Audio List Mode Screen
s)NTHE)$INFORMATIONMODESCREENTOUCHTHE)$
INFOAREATOSWITCHTHEPLAYINGLISTANDINTHEPLAYING
LISTMODESCREENTOUCHTHEBUTTON[ ]TOBACKTO
THEFATHERFOLDER)FTHELISTISINROOTTOUCHITTO
CLOSETHELIST
s4OUCHTHEBUTTON;; =TOBACKTOTHEFATHERFOLDER)F
THELISTISINROOTTOUCHITTOCLOSETHELIST
s4OUCHTHEBUTTON; =TOCLOSETHE,ISTANDBACKTO
THE)$INFORMATIONMODE
Selecting a list item from a list screen
1
4OUCHTHEDESIREDTRACKNAMEONTHELISTto play it.
iPod Video Menu Operations
#ONNECTYOURI0ODI0HONETOTHE53"CONNECTOR
4HESYSTEMWILLAUTOMATICALLYDETECTTHECONNECTED
DEVICEANDTHEI0OD6IDEOBUTTONWILLBEENABLEDFOR
OPERATIONONTHE-AIN-ENUSCREEN
2
3IMPLE#ONTROLBUTTON
6IDEO-ODEBUTTON
]INOPTIONMENU
s)FTHE3IMPLE#ONTROLISSETTO[
THESCREENWILLBECOME3IMPLE#ONTROL-ODE)TCAN
ALSODISPLAYTHEVIDEOOFI0ODI0HONEREGARDLESSIT
ISI0OD!UDIOORI0OD6IDEOMODE"UTONLY
h0REVIOUS4RACKv᱃h0LAY0AUSEvANDh.EXT4RACKv
CANBEOPERATED
]THEVIDEOWILLPLAYFROMI0OD
s4OUCH[
s 7HENANI0ODI0HONEISALREADYCONNECTED
]BUTTONONTHE-AIN-ENU
4OUCHTHE[
SCREEN4HESYSTEMCHANGESTOTHEI0OD6IDEOMODE
ANDSTARTSPLAYBACKFROMTHEPREVIOUSPOSITION
4OUCH-%.5BUTTONON/PERATIONAL0ANELTORETURNTO
THE-AIN-ENU
s 6IEWINGVIDEODATAINTHEI0ODI0HONEONLYFORTHE
I0ODI0HONEWITHVIDEOFEATURES
7HENYOUCONNECTANI0ODI0HONEWITHVIDEOFEATURES
BYUSINGTHEOPTIONALCONNECTORCABLEFORI0ODI0HONE
WITHVIDEOYOUCANENJOYTHEVIDEODATAANDSLIDE
SHOWDATASTOREDINTHEI0ODI0HONEANDSHOWTHEM
ONTHEDISPLAYOFTHISUNITANDTHEREARMONITORIF
CONNECTED
iPod Video ID3 Mode Screen
11
10
9
Skipping a Track (Simple Control Mode)
4OUCHTHE[ ]OR[ ]BUTTONDURINGPLAYBACK4RACKS
ARESKIPPEDASMANYTIMESASTHEBUTTONISTOUCHED
ANDPLAYBACKSTARTS
s4OUCHTHE[ ]BUTTONTOSTARTSPLAYBACKFROMTHE
BEGINNINGOFTHENEXTTRACK
s4OUCHTHE[ ]BUTTONTOSTARTSPLAYBACKFROMTHE
BEGINNINGOFTHECURRENTTRACK
7HENTHISBUTTONISTOUCHEDAGAINWITHINABOUT
SECONDSPLAYBACKSTARTSFROMTHEBEGINNINGOFTHE
PREVIOUSTRACK
12
13
7
14
3
1
2
4
5
6
8
NX404
31
Owner’s Manual
4OUCHTHELISTSCREENANDmICKUPORDOWNTOSCROLL
THELIST
4OUCHADESIREDLISTITEMONTHESCREENTODISPLAY
THECORRESPONDINGLISTOFTRACKS
English
Note: )N3IMPLE#ONTROL-ODETHEBESTWAYISTOCONTROL
THEI0ODJUSTONI0OD
English
Simple Control Mode
English
Owner’s Manual
/PTIONBUTTON
2EPEATBUTTON
0REVIOUS4RACKBUTTON
0LAY0AUSEBUTTON
.EXT4RACKBUTTON
0LAYING&ILETITLE
#ATEGORYLIST
=0REVIOUS0AGE;
.EXT0AGE;
3YSTEMTIME
"LUETOOTH3TATUSINDICATOR
0LAYBACK3TATUSINDICATOR
!RTWORK
3HORTCUTBUTTON
0ROGRESSBAR
=BUTTON
4HISOPERATIONISSAMEASTHISINI0OD!UDIOMODE
iPod Video Simple Control Mode Screen
Note:
4HISICONSHOWSONLYWHEN:ONEON4HISICONISIN
some screen pictures and none in other some pictures.
)TISBETTERTOBESAMESETTINGINAMANUAL!LSO.AVI
ICONSHOWSOWNEDBYSETTING4HEREISNO.AVIICON
SCREENINTHISMANUAL
Play/Pause Playback
4OUCH[
4OUCH[
]BUTTONTOPAUSEDURINGPLAYBACK
]BUTTONAGAINTORESUMEPLAYBACK
Switch to Previous/Next file
s4OUCH[ ]OR[ ]BUTTONDURINGPLAYBACKTOPLAY
PREVIOUSNEXTlLE
s4OUCH[ ]BUTTONTOSTARTSPLAYBACKFROMTHE
BEGINNINGOFTHENEXTTRACK
s4OUCH[ ]BUTTONTOSTARTSPLAYBACKFROMTHE
BEGINNINGOFTHECURRENTTRACK
4HISOPERATIONISSAMEASTHISINI0OD!UDIOMODE
Repeat Playback
4HEREPEATSETASTHEFACTORYDEFAULTISDEPENDON
I0ODI0HONE
]BUTTONONCEFOR2EPEAT/NEAGAIN
4OUCHTHE[
FOR2EPEAT!LLAGAINFOR2EPEAT/FF
iPod Video Play Mode Screen
9
8
7
Album Art work
)FCURRENTVIDEOlLECONTAINSALBUMARTIMAGEIN)$
THEPICTUREWILLBEDISPLAYEDINTHISAREA
ID3 Information Area
4HEAREAISDISPLAYTHETITLEOFTHEPLAYINGlLE
Category List
3ELECTDIFFERENTCATEGORYMOVIESTOPLAY4HE
CATEGORYISSAMEASTHEI0ODI0HONE
iPod Video List Mode Screen
1
2
3
4
5
0REVIOUS4RACK&AST"ACKWARDBUTTON
0LAY0AUSEBUTTON
.EXT4RACK&AST&ORWARDBUTTON
0ROGRESSBAR
32
NX404
6
4OUCH[
4OUCH[
]BUTTONTOPAUSEDURINGPLAYBACK
]BUTTONAGAINTORESUMEPLAYBACK
Switch to Previous/Next Track
English
s!UDIOMAYBEPLAYEDBACKSLIGHTLYOUTOF
synchronization with video images.
iPod Audio Bluetooth Mode
7HENYOURI0ODI0HONEHAVECONNECTEDVIABLUETOOTH
TOTHISUNITYOUCANALSOENTERI0OD!UDIOMODE4HE
OPERATIONISSAMEASTHENORMALI0OD!UDIOMODE
s4OUCH[ ]OR[ ]BUTTONDURINGPLAYBACKTOPLAY
PREVIOUSNEXTTRACK
s4OUCH[ ]BUTTONTOSTARTSPLAYBACKFROMTHE
BEGINNINGOFTHENEXTTRACK
s4OUCH[ ]BUTTONTOSTARTSPLAYBACKFROMTHE
BEGINNINGOFTHECURRENTTRACKWHENTHISBUTTONIS
TOUCHEDAGAINWITHINABOUTSECONDSPLAYBACK
STARTSFROMTHEBEGINNINGOFPREVIOUSTRACK
BEGINNINGOFTHECURRENTTRACK
Fast Forward /Fast Backward
4OUCH[ ]OR[ ]BUTTONANDHOLDMORETHAN
SECONDSTOSTARTFASTBACKWARDORFASTFORWARDDURING
PLAYBACK2ELEASETHEBUTTONWILLCONTINUEPLAYBACK
WITHNORMALSPEED
Note:
4HEFASTFORWARDANDFASTBACKWARDSPEEDMAYDIFFER
depending on the video files.
Repeat Playback
4HEREPEATSETASTHEFACTORYDEFAULTIS2EPEAT/FF
]BUTTONONCEFOR2EPEAT/NEAGAIN
4OUCHTHE[
FOR2EPEAT!LLAGAINFOR2EPEAT/FF
Note:
4HEOPERATIONINI0ODVIDEOMODEISASSAMEASI0OD
!UDIOMODE0LEASEREFERTOTHEI0OD!UDIO-ODE
operation.
Note:
6IDEOPLAYBACKISNOTAVAILABLEONALLI0ODI0HONE
DEVICES0LEASECONTACTYOUR#LARIONDEALERFORDETAILS
An optional connection cable or accessory may be
required for this feature.
Note:
sh!5$)//.,9vISDISPLAYEDWHENTHEAUTOMOBILEIS
moving.
s)MAGEDATAMAYNOTBEPLAYEDBACKACCORDINGTOTHE
STATUSOFTHEI0ODI0HONE
s4HEVOLUMESETTINGOFVIDEODATAISRELATIVELYLOWERTHAN
audio data. Be sure to lower the volume setting before
switching to the other mode.
s$ONOTSELECTTHECATEGORIESWITHNOTRACKREGISTERED
FROMTHEI0ODMENUSCREEN4HEI0ODI0HONEMAYBE
FROZEN)FTHEI0ODI0HONEISFROZENRESETTHEI0OD
I0HONEBYFOLLOWINGTHEPROCEDUREDESCRIBEDINTHE
NX404
33
Owner’s Manual
Play/Pause Playback
INSTRUCTIONMANUALOFTHEI0ODI0HONE
English
-ENU,ISTBUTTON
2EPEATBUTTON
3YSTEMTIME
"LUETOOTHSTATUSINDICATOR
0LAYBACKINFORMATION
English
12. Pandora OPERATIONS
®
If you have any issues with the Pandora application on your
mobile phone, please direct them to
pandora-support@pandora.com.
Owner’s Manual
Selecting the Pandora Mode
4URNON0ANDORAFUNCTIONOFYOURI0OD
#ONNECTYOURI0ODI0HONE!NDROIDTOTHEUNIT
7HENI0ODI0HONE!NDROIDISALREADYCONNECTED
TOUCHTHE
;0ANDORA=ICONONTHE-AIN-ENUSCREEN
s0ANDORAMODENOWPLAYINGSCREEN0ANDORAMODE
INFORMATIONSCREEN
8
9
10
1
11
12
2
13
3
4
5
6
7
s)FSKIPLIMITHASBEENREACHED3KIPTRACKSIN
(THISFUNCTIONWILLNOTAVAILABLE
s4RACKRATING
4OUCH; =OR; =BUTTONTO4HUMBSDOWNOR4HUMBS
UPCURRENTTRACKANDTHEBUTTONWILLLIGHT
.OTE
s4OUCH; =BUTTONWILLSKIPTONEXTTRACKSKIPLIMITHAS
NOTBEENREACHED
s3OMETRACKISNOTABLETOBERATEDIEAUDIOADS
ANDSHAREDSTATIONCONTENT4HETHUMBSBUTTONSWILL
DISABLE
s"OOKMARKING
4OUCH; =BUTTONTOSTORECURRENTTITLEORARTISTTO
TRACKFAVORITESLIST
Note:
s3OMETRACKARENOTABLETOBEBOOKMARKEDIEAUDIO
ADS)NTHISCASETHEBOOKMARKBUTTONSWILLDISABLE
s0ANDORA-ODE3TATION,IST
1
!RT7ORK
0ROGRESSBAR
3ETTINGSBUTTON
4HUMBSDOWN
4OUCHTHISBUTTON4HUMBSDOWNCURRENTTRACKAND
PLAYNEXTTRACK
0LAY0AUSEBUTTON
5SETOCONTROLPLAYBACKANDPAUSE
4OUCHTHEBUTTONDURINGPLAYBACK0LAYBACK
PAUSES
4ORESUMEPLAYBACKTOUCHTHEBUTTONAGAIN
.EXTTRACKBUTTON
4HUMBSUP
3YSTEMTIME
,ISTBUTTON
4OUCHTHISBUTTONTOSHOW,IST3CREEN
#URRENTSTATIONNAME
#URRENTTITLE
4OUCHICONTOSTORECURRENTTITLETOTRACKFAVORITESLIST
#URRENTARTIST
4OUCHICONTOSTORECURRENTARTISTTOARTISTFAVORITESLIST
#URRENTALBUMNAME
ING
ING
NG
s3KIPPINGATRACK0ANDORAMODE
4OUCH;=BUTTONDURINGPLAYBACKTRACKSARE
SKIPPEDANDSTARTSPLAYBACKFROMTHEBEGINNINGOFTHE
NEXTTRACK
Note:
s3OMETRACKARENOTABLETOBESKIPPED
34
NX404
2
3
;
=BUTTON
4OUCHTHISBUTTONTODISPLAY)NFORMATION3CREEN
;
=BUTTON
4OUCHTHISBUTTONTOSORTTHELISTBYlRSTLETTERTOUCH
AGAINTOSORTTHELISTBYDATE
3TATIONLISTTOUCHTOSELECTSTATIONPLAY
7HENTHEDESIREDSTATIONISNOTDISPLAYEDTOUCHAND
mICKTHESTATIONLISTUPORDOWN
s0ANDORA-ODE3ETTINGSCREEN
1
2
3
English
English
!DDANEW3TATION
3ELECTADEVICE
s4HISh3ELECT$EVICEvKEYISUSEWHENCONNECT
I0HONEBYTHE53"ANDCONNECTTHE!NDROIDBY
"LUETOOTH4HEDEFAULTSETTINGTHE53"CONNECTION
HASPRIORITY
#LOSETHESETTINGSCREEN
Owner’s Manual
Pandora Bluetooth Mode
When your mobile phone have connected to the unit
via bluetooth.You can also enter the Pandora mode.
The OPERATIONISSAMEASTHENORMALPandora MODE
1
"4MODE
7HENCONNECTEDVIABLUETOOTH4HISICONWILLCHANGE
FROM53"TO"4
Note:
0ANDORAINTERNETRADIOMAYNOTBEAVAILABLEINALL
AREASDUETOGOVERNMENTRESTRICTIONS
7HENTHE0ANDORAMODESTARTTHISSYSTEMCHOOSES
THEPREVIOUSLYCONNECTEDDEVICE!NDROIDORI/3
7HENITISCONNECTED!NDROID"4I0HONE"4OR53"
TOGETHERANDh$ONOTSHOWAGAINvISNOTCHECKED
DISPLAYTHEPOPUPOFCHOOSEDEVICE
3. When connect the mobile phone by Bluetooth or
USB when the Pandora mode, there is a case the
change device button works correctly. We recommend
that after finished the Pandora mode, then connect
other mobile phone.
4. When the Pandora mode and operate the audio
player or internet radio other than Pandora, there is a
case that Pandora doesn’t playback correctly. Please
don’t operate the audio payer or internet radio other
than Pandora when the Pandora mode.
5. During Pandora playback in the Pandora mode
with the Bluetooth connection, the volume level is
controlled only by the mobile phone side. (Both iOS
devise and Android)
NX404
35
English
13. Bluetooth AUDIO PLAYER OPERATIONS
®
Owner’s Manual
3OME"LUETOOTHCELLULARPHONESHAVEAUDIOFEATURES
ANDSOMEPORTABLEAUDIOPLAYERSSUPPORTTHE
"LUETOOTHFEATURE4HESEDEVICESWILLBECALLEDAS
h"LUETOOTHAUDIOPLAYERSvINTHISMANUAL4HISSYSTEM
CANPLAYAUDIODATASTOREDINA"LUETOOTHAUDIOPLAYER
Note:
s4HISSYSTEMWILLNOTOPERATEORMAYOPERATEIMPROPERLY
with some Bluetooth audio players.
s&ORDETAILEDINFORMATIONONTHEPLAYABLE"LUETOOTH
audio players, see our home page: WWWCLARIONCOM
Selecting the Bluetooth Audio Mode
4OUCHTHE;"LUETOOTH!UDIO=BUTTONTOSELECTTHE
"LUETOOTH!UDIOMODE
4HESYSTEMCHANGESTOTHE"LUETOOTHMODE)FTHE
CONNECTIONWITHA"LUETOOTHAUDIOPLAYERHASBEEN
ALREADYESTABLISHEDYOUMAYSELECTTHE-USIC
FUNCTION
0RESS-%.5BUTTONON/PERATIONAL0ANELTORETURN
TOTHE-AIN-ENU
s 7HENTHECONNECTIONWITHBLUEICONA"LUETOOTH
AUDIOPLAYERHASBEENESTABLISHEDTHE[ ]ICONIS
DISPLAYEDATTHETOPOFTHESCREEN
)FYOUWANTTOCHANGETHE0IN#ODESETTINGOFTHISUNIT
PERFORMTHEFOLLOWINGSTEPS
s 4HEFACTORYDEFAULTSETTINGIShv
4OUCHTHETEXTBOXOFTHE0IN#ODEITEMTODISPLAY
THE4EN+EY0ADSCREEN
%NTERYOURDESIREDDIGIT0).NUMBERANDTHEN
]BUTTON
TOUCHTHE[
Registering your Bluetooth Audio
Player (Pairing)
9OUCANREGISTERUPTO"LUETOOTHAUDIOPLAYERS
9OURMOBILEPHONE"LUETOOTHVERSIONISUNDER
0LEASEINPUT0).CODEhv
4URNONTHEPOWEROFTHE"LUETOOTHAUDIOPLAYERYOU
WISHTOREGISTER
4OUCHTHE$EVICEBUTTON[ ]TODISPLAYTHE$EVICE
3ELECTSCREEN
4OUCHTHE[
SCREEN
Bluetooth Audio Player Settings
9OUCANCONlRMVARIOUSINFORMATIONCONCERNINGABOUT
THE"LUETOOTH)NTERFACEFEATURES
4OUCHTHE[ ]BUTTONTODISPLAYTHEINFORMATIONON
THESCREEN
G
7HENYOUlNISHCONlRMINGTHE"LUETOOTH
INFORMATIONTOUCHTHE[ ]BUTTONTORETURNTOTHE
PREVIOUSSCREEN
36
NX404
]BUTTONTODISPLAYTHE)NQUIRING$EVICE
English
Note:
s/CCASIONALLYDEPENDINGONTHEENVIRONMENTPLAYBACK
sounds may be fragmented, or switch noises may be
generated.
Playing Music
!FTERTHECONNECTIONWITHA"LUETOOTHAUDIOPLAYERIS
ESTABLISHEDTHEPLAYMODEISAUTOMATICALLYENGAGED
s 7HENPLAYBACKISNOTSTARTEDFORSOMEDEVICES
TOUCHTHE[
]BUTTONMANUALLY
Pausing Playback
4OUCHTHE[
]BUTTONDURINGPLAYBACK
Playback Pauses.
7HENTHEPAIRINGOPERATIONCOMPLETESTHEREGISTERED
"LUETOOTHAUDIOPLAYERISSETASTHECURRENTDEVICE
AFTERSELECTINGTHEFAVORITEICONTHEDISPLAYRETURNTO
THEDEVICELISTSCREEN4OUCH[
]BUTTONTHEDISPLAY
WILLRETURNTOTHE"LUETOOTHAUDIOMODESCREEN
4ORESUMEPLAYBACKTOUCHTHE[
0LAYBACKRESUMES
]BUTTON
Skipping a Track (searching)
4OUCHTHE[
]OR[
]BUTTONDURINGPLAYBACK
Stopping Playback
4OUCHTHE[
]BUTTONDURINGPLAYBACK
]BUTTONTO
4RACKSARESTOPPEDTOUCHTHE[
PLAYBACKTHElRST4RACK
Show Track List
s4ODELETETHE"LUETOOTHAUDIOPLAYERREGISTRATION
=BUTTONTODELETETHEDEVICE
4OUCHTHE;
!CONlRMATIONSCREENISDISPLAYED
=BUTTONTOCONlRMDELETE
4OUCHTHE;
4OUCHTHE[
]BUTTONTOSHOWTHECURRENTTRACK
LIST
]BUTTONTOSHOWALLOFTHELISTS!ND
4OUCHTHE[
YOUCANPLAYBACKANYTRACKSBYTOUCHTHEITEMSIN
THELIST
Selecting the Bluetooth Audio Player
4OCHANGETHECURRENT"LUETOOTHAUDIOPLAYERTOTHE
OTHERDEVICEWHICHISALREADYREGISTEREDPERFORMTHE
FOLLOWINGOPERATION
4OUCHTHEDEVICEBUTTONTO[ ]DISPLAYTHE$EVICE
3ELECTSCREEN
4OUCHTHECURRENTLYCONNECTEDDEVICEBUTTONTHEN
TOUCHTHE[
]BUTTONTODISCONNECTTHEACTIVE
DEVICE
4OUCHTHEDESIRED$EVICEBUTTONYOUWISHTOUSE
4OUCH[
]BUTTONTOSELECTITASYOURACTIVE
DEVICE4HECORRESPONDINGCELLULARPHONEISSETAS
CURRENTTELEPHONE
4OUCHTHE[
]BUTTONTORETURNTOTHEPREVIOUS
SCREEN
NX404
37
Owner’s Manual
!NDSELECTATYPEOFTHISDEVICE
Controlling the Bluetooth Audio Player
English
4OUCHYOURDESIREDDEVICEBUTTONANDTOUCH[
]BUTTONTOREGISTERFORTHE"LUETOOTHAUDIO
PLAYER4HENSELECTANIMAGEOFTHISDEVICE
English
14. Bluetooth TELEPHONE OPERATIONS
®
Owner’s Manual
7HENTHECONNECTIONWITHYOUR"LUETOOTHCELLULAR
PHONEISESTABLISHEDTHEFOLLOWINGFUNCTIONSARE
AVAILABLEONTHISUNIT
s ,ISTENINGTOYOURTELEPHONECALLSONTHECAR
SPEAKERS
s !NSWERINGTOANINCOMINGCALL
s -AKINGACALLUSINGTHE4EN+EYPADSCREEN
s -AKINGACALLUSINGTHE0HONE"OOKDATAINTHE
SELECTEDCELLULARPHONE
s -AKINGACALLUSINGTHE(ISTORYDATAOFTHEDIALED
RECEIVEDCALLS
4OUCHTHE[
]BUTTONTODISPLAYTHEINFORMATIONON
THESCREEN
0ERFORMSETTINGFORTHEDESIREDITEM3EETHE
FOLLOWINGSECTIONSFORDETAIL
7HENYOUlNISHCONlRMINGTHE"LUETOOTH
INFORMATIONTOUCHTHE[
]BUTTONTORETURNTOTHE
PREVIOUSSCREEN
Note:
s3OMECELLULARPHONESMAYNOTBEABLETOTRANSFERTHE
0HONE"OOKDATATOHEADUNIT
s4HE0HONE"OOKDATATRANSMISSIONMAYTAKEALONG
TIME4HEOPERATIONSOFSENDINGCALLSAREDISABLED
during the data transmission.
Select the BT Phone Mode
4OUCHTHE;"LUETOOTH4ELEPHONE=BUTTONTOSELECTTHE
"LUETOOTH4ELEPHONEMODE
4HE4ELEPHONESCREENISDISPLAYED
0RESS-%.5BUTTONON/PERATIONAL0ANELTORETURN
TOTHE-AIN-ENU
s 7HENNO"LUETOOTH4ELEPHONECONNECTEDTHEICON
[ ]ISDISPLAYEDATTHETOPOFTHESCREEN
3ETTING!UTOMATIC#ONNECTION
4HESYSTEMAUTOMATICALLYRECONNECTSTHECELLULAR
PHONEAFTERTHECONNECTIONISLOSTORTHESYSTEMIS
RESTARTED
s 4HEFACTORYDEFAULTSETTINGISh/.v4OUCHTHE
[
]OR[
]BUTTONOFTHE!UTOMATIC#ONNECTION
ITEMTOSETTHEFUNCTION/.OR/&&
3ETTING!UTOMATIC!NSWER
)FACALLCOMESINANSWERAUTOMATICALLYAFTER
SECONDS
s 4HEFACTORYDEFAULTSETTINGISh/&&v4OUCHTHE
]OR[
]BUTTONOFTHE!UTOMATIC!NSWERITEM
[
TOSETTHEFUNCTION/.OR/&&
3ETTING-ICROPHONE'AIN
9OUCANADJUSTTHEINPUTLEVELOFTHEMICROPHONEIN
LEVELS
s 4OUCHTHELEVELINDICATORBUTTONOFTHE-ICROPHONE
'AINITEMTOADJUSTTHEINPUTLEVEL
s 7HENTHECONNECTIONWITHA"LUETOOTH4ELEPHONE
HASBEENESTABLISHEDTHEICON[ ]ANDSIGNALLEVEL
INDICATORAREDISPLAYEDATTHETOPOFTHESCREEN
Bluetooth Telephone Settings
9OUCANCONlRMVARIOUSINFORMATIONCONCERNINGABOUT
THE"LUETOOTH)NTERFACEFEATURES
38
NX404
Note:
s4HEINPUTLEVELOFTHEMICROPHONECANBEAFFECTEDBY
ITSSURROUNDINGS!DJUSTTHELEVELIFTHEPERSONONTHE
other end of the telephone has a reception problem.
English
7HENTHEPAIRINGOPERATIONCOMPLETESTHE
REGISTEREDCELLULARPHONEISSETASTHECURRENT
TELEPHONEANDTHEDISPLAYRETURNSTOTHE
4ELEPHONESCREEN
s 4ODELETETHECELLULARPHONEREGISTRATION
4OUCHTHE;
=BUTTONTODELETETHEDEVICE
!CONlRMATIONSCREENISDISPLAYED
4OUCHTHE;
=BUTTONTOCONlRMDELETE
Select the Cellular Phone
4OUCHTHE[
$EVICESCREEN
]BUTTONTODISPLAYTHE)NQUIRING
4OCHANGETHECURRENTCELLULARPHONETOTHEOTHER
DEVICEWHICHISALREADYREGISTEREDPERFORMTHE
FOLLOWINGOPERATION
4OUCHTHE[ ]BUTTONTODISPLAYTHE$EVICE3ELECT
SCREEN
4OUCHTHECURRENTLYCONNECTEDDEVICETHENTOUCH
[
]BUTTONTODISCONNECTTHEACTIVEDEVICE
4OUCHTHEDESIRED$EVICEBUTTONYOUWISHTOUSE
]BUTTONTOSELECTITASYOURACTIVE
4OUCH[
DEVICE4HECORRESPONDINGCELLULARPHONEISSETAS
THECURRENTTELEPHONE
s )FTHEPOWEROFTHECELLULARPHONEISNOTTURNEDON
TURNITON
s 4HECELLULARPHONEMAYPROMPTTOACKNOWLEDGETHE
"LUETOOTHCONNECTIONORTOENTERTHE0ASS+EYCODE
OFTHISUNIT0ERFORMTHESEOPERATIONSACCORDINGTO
THEMESSAGEDISPLAYED
4OUCHTHE[
]BUTTONTORETURNTOTHEPREVIOUS
SCREEN
Obtaining the Phone Book Data
3ENDINGTHE0HONE"OOKDATAFROMTHECELLULARPHONE
ENABLESYOUTOMAKEACALLUSINGTHE0HONE"OOK
FUNCTIONFROMTHISUNIT
4OUCHYOURDESIRED#ELLULARBUTTONTOSELECTTHE
BUTTONFORTHECELLULARPHONETOBEREGISTEREDAND
TOUCH[
]BUTTONTOREGISTERFORTHE"LUETOOTH
CELLULARPHONE
s 9OUCANNOTSELECTTHE#ELLULARBUTTONOFWHICH
ANOTHERCELLULARPHONEISALREADYREGISTERED
3ELECTABLANK#ELLULARBUTTON
)FENTERINGTHE0ASS+EYCODEISPROMPTEDONYOUR
CELLULARPHONEENTERTHE0ASS+EYCODESETINTHIS
UNIT
s 9OUCANCHANGETHE0ASSKEYSETTINGOFTHIS
UNITFROMTHE"LUETOOTH)NFOSCREENUNDERTHE
4ELEPHONE3ETTINGSSCREEN
Telephone Operations
Making a call using the Ten-Key pad
4OUCHTHE[ ]BUTTONTODISPLAYTHE4EN+EYPAD
SCREEN
%NTERTHETELEPHONENUMBERBYUSINGTHE4EN+EY
PADDISPLAYEDONTHESCREEN
NX404
39
Owner’s Manual
9OUCANREGISTERUPTOCELLULARPHONES4HE
REGISTERINGMETHODISASSAMEASh2EGISTERINGYOUR
"LUETOOTHAUDIOPLAYERv
9OURMOBILEPHONE"LUETOOTHVERSIONISUNDER
0LEASEINPUT0).CODEhv
4URNONTHEPOWEROFTHECELLULARPHONEYOUWISHTO
REGISTER
]TODISPLAYTHE
4OUCHTHE$EVICEBUTTON[
$EVICE3ELECTSCREEN
English
Registering Your Cellular Phone
(Pairing)
Making a Call Using the Phone Book
English
9OUCANUSETHE0HONE"OOKDATAOBTAINEDFROMTHE
CELLULARPHONETOMAKEACALLFROMTHISUNIT
Owner’s Manual
s/NLYTHE0HONE"OOKITEMSWITHATLEASTONETELEPHONE
NUMBERREGISTEREDINTHECAPTURED0HONE"OOKDATA
AREDISPLAYEDONTHE0HONE"OOKSCREEN
Note:
s"EFOREUSINGTHISFUNCTIONTHE0HONE"OOKDATAMUST
be sent from the cellular phone.
4OUCHTHE[
]3ENDBUTTONTOCALLTHEENTERED
NUMBER
s 4HEFOLLOWING4ELEPHONE)NTERRUPTSCREENIS
DISPLAYEDDURINGPHONECALL
4OUCHTHE[
]BUTTONTODISPLAYTHE0HONE"OOK
SCREEN
4OUCHTHEDESIREDNAMEBUTTONYOUWISHTODIAL
s &LICKTHELISTUPANDDOWNTOSCROLLTHELIST
]BUTTONTOCALLTHESPECIlED
4OUCHTHE[
NUMBER4HE4ELEPHONE)NTERRUPTSCREENIS
DISPLAYEDANDCALLINGSTARTS
s 7HENTHECALLISlNISHEDTOUCHTHE[
]BUTTON
TOHANGUP
Making a Call Using the History
s 4OUCHTHE[ ]BUTTONTOTALKBYUSINGTHECELLULAR
PHONEANDCANCELINGTHEHANDSFREEFUNCTION
0RIVATE-ODE4ORETURNTOTHEHANDSFREEMODE
TOUCHTHE[ ]BUTTONAGAIN
s 4OUCHTHE[ ]BUTTONTOMUTETHEMICROPHONE
.OWYOUCANHEARTHEOTHERSIDEBUTTHEOTHERSIDE
CANNOTHEARYOURSIDE
s 4OUCHTHE[ ]BUTTONTOHOLDTHECURRENTPHONECALL
NOWYOUCANANSWERTOTHEOTHERINCOMINGCALL
4OUCHAGAINTOTALKWITHPREVIOUSCALL
)FDURINGACALLWITHATHIRDPARTYCALLYOUCANKEEP
THECURRENTCALLTOANSWERATHIRDPARTYORHANGUP
THECURRENTCALLTOANSWERATHIRDPARTY9OUCANALSO
IGNORETHETHIRDPARTYCALLS
7HENTHECALLISlNISHEDTOUCH[
HANGUP
]BUTTONTO
Note:
s$EPENDINGONSOMESPECIALCELLULARPHONETHE
4ELEPHONE)NTERRUPTSCREENMAYBECLOSEDANDTHE
connection with this system may be disconnected
WHENENTERINGTHE0RIVATEMODE
40
NX404
4HESYSTEMWILLMEMORIZETHE$IALED2ECEIVEDCALLS
RECORDDATAINTHEMEMORY9OUCANCONlRMITANDUSE
ITTOMAKEACALLFROMTHISUNIT
4OUCHTHE[ ]BUTTON4HE(ISTORY,ISTSCREENIS
DISPLAYED
s 4HEITEMSARESORTEDBY$IALED-ISSEDAND
2ECEIVEDCALLS
s &LICKTHELISTUPANDDOWNTOSCROLLTHELIST
4OUCHTHEDESIRED(ISTORYITEMKEYYOUWISHTODIAL
]BUTTONTOCALLTHESPECIlED
4OUCHTHE[
NUMBER4HE4ELEPHONE)NTERRUPTSCREENIS
DISPLAYEDANDCALLINGSTARTS
s 7HENTHECALLISlNISHEDTOUCHTHE[
]BUTTON
TOHANGUP
Answering to an incoming call
7HENACALLCOMESINTHEFOLLOWING4ELEPHONE
)NTERRUPTSCREENAPPEARS
9OUCANANSWERTOTHEINCOMINGCALLONTHISSYSTEMBY
THEFOLLOWINGOPERATION
4OUCHTHE[
]BUTTONTOANSWERTHECALL
]BUTTON
7HENTHECALLISlNISHEDTOUCHTHE[
TOHANGUP
English
0RESSTHEPRESETSTATIONTOON0RESETLIST
Listening to the Tuner
10
9
8
7
Manual memory
4OUCHTHEDESIREDBANDBUTTONTOSELECTTHEBAND
YOUWISHTOSTORE
4UNETOASTATIONYOUWANTTOSTOREUSINGTHESEEK
TUNINGSTEPTUNINGORPRESETTUNING
4OUCHANDHOLDTHEDESIRED0RESETBUTTONYOUWANT
TOSTOREFORABOUTSECONDS
Auto Store
5
12
6
4
13
1
2
3
0RESET3CANBUTTON
3EEKDOWNBUTTON
3EEKUPBUTTON
3TEPDOWNBUTTON
3TEPUPBUTTON
&REQUENCIESDISPLAY
3YSTEMTIME
"LUETOOTHSTATUSINDICATOR
0RESETCHANNELLIST
$8,OCALINDICATOR
"ANDBUTTON
3HORTCUTBUTTON
/PTIONBUTTON
4HE!UTO3TOREISAFUNCTIONFORSTORINGUPTOSTATIONS
THATAREAUTOMATICALLYSEARCHEDINSEQUENTIALLY)FTHE
NUMBEROFRECEIVABLESTATIONSCANNOTREACHTOTHE
PREVIOUSSTOREDSTATIONREMAINS
4OUCHTHE[FM1/2/3/AM]BUTTONTOSELECTTHE
DESIREDBAND&-OR!-
4OUCHTHE[ ]BUTTONANDTHENTOUCHTHE[
]
BUTTONTOSTARTTHE!UTO3TORE
!BEEPSOUNDSANDTHESTATIONSWITHGOODRECEPTION
ARESTOREDAUTOMATICALLYTOTHEPRESETLIST
Notes:
!FTERAUTOSTORETHEPREVIOUSSTOREDSTATIONSWILLBE
overwritten.
4HEUNITHASBANDSBUT&-AND!-CANSTOREBY
Auto Store function.
Seek Tuning
Preset Scan
4OUCHTHE;&-!-=BUTTONTOSELECTTHERADIO
BAND&-OR!-
4OUCHTHE[ ]OR[ ]BUTTON
s7HENTOUCHTHE[ ]BUTTONTHESTATIONISSEARCHED
INTHEDIRECTIONOFHIGHERFREQUENCY
s7HENTOUCHTHE[ ]BUTTONTHESTATIONISSEARCHED
INTHEDIRECTIONOFLOWERFREQUENCY
4HE0RESET3CANRECEIVESTHESTATIONSSTOREDINTHE
PRESETMEMORYINORDER4HISFUNCTIONISUSEFULWHEN
SEARCHINGFORTHEDESIREDSTATIONINMEMORY
4OUCHTHE;&-!-=BUTTONTOSELECTTHEDESIRED
BAND&-OR!-
4OUCHTHE[
]BUTTONTOSTARTTHE0RESET3CAN
4HEUNITSTARTSSCANNINGEACHSTATIONFORSECONDS
SEQUENTIALLY"UTTHESTATIONSTOREDISNOTAVALID
STATIONTHESCANNINGTIMEISONLYSECONDS
7HENTHEDESIREDSTATIONISTUNEDINTOUCHTHE
[
]BUTTONAGAINTOSTAYINTHATSTATION
Step Tuning
4OUCHTHE;&-!-=BUTTONTOSELECTTHERADIO
BAND&-OR!-
4OUCHTHE[ ]OR[ ]BUTTONINFREQUENCYMENUTO
TUNEUPORDOWNBYONESTEP
Recalling a preset station
4OUCHTHE[FM1/2/3/AM]BUTTONTOSELECTTHEDESIRE
BAND&-OR!-ONTHETUNER
DX/Local Setting
4HE$8,OCALSETTINGCHANGESTHETUNERSENSITIVITYIN
ORDERTOSEPARATECLOSELYSPACEDSTATIONS4HISFEATURE
ISUSEFULINAREASTHATHAVEMANYRADIOSTATIONSIN
CLOSEPROXIMITY
NX404
41
Owner’s Manual
4OUCHTHE4UNERBUTTONONTHEMAINMENUDISPLAY
4HETUNERMODESCREENISDISPLAYED
4OUCHTHE;&-&-&-!-=BUTTONTOSELECTTHE
RADIOBAND%ACHTIMETHEBUTTONISTOUCHEDTHE
RADIORECEPTIONBANDCHANGESINTHEFOLLOWINGORDER
&-&-&-!-&-
11
English
15. TUNER OPERATIONS
English
16. HDMI MODE
Wire Connection of HDMI Mode
Owner’s Manual
iPhone 4, iPhone 4S, iPhone 5, iPhone 5s and iPhone 5c can be connected by using the connector cable
supplied with the iPhone 4, iPhone 4S, iPhone 5, iPhone 5s and iPhone 5c and HDMI cable (sold in the
market) or CCA-770 and digital Av adapter.
.OTE
4HEFOLLOWINGISPARTOFTHEWIRINGEXAMPLE
Depending on the device, there is a case to connect to the device directly with the CCA-771.
Depending on the adapter or device, there is a case that the audio noise and video noise is generated.
(1) Connection with the iPhone 4 and iPhone 4S
HDMI cable sold in the market or 䧴CCA-770
NX404
Apple Genuine 30pin cable
iPhone 4 and iPhone 4S
Apple Genuine
30pin-Digital AV adapter
(2) Connection with the iPhone 5, iPhone 5s and iPhone 5c
HDMI cable sold in the market or 䧴CCA-770
NX404
Apple Genuine Lightning TM
cable
iPhone 5, iPhone 5s and iPhone 5c
Apple Genuine
Lightning-Digital AV adapter
(3) Connection with the Android Phone
䎰䏌䏆䏕䏒䎃䎸䎶䎥䎃䏆䏄䏅䏏䏈䎃䏖䏒䏏䏇䎃䏌䏑䎃䏗䏋䏈䎃䏐䏄䏕䏎䏈䏗
NX404
HDMI cable sold in the
market or 䧴CCA-770
(4) ConnecƟon with the equipment with HDMI output
HDMI cable sold in the
market
NX404
42
NX404
MHL adaptor sold
in the market
Electronic devices with HDMI output
English
English
Select HDMI source
Owner’s Manual
4OUCHTHE($-)MENUBUTTONTHENAPPEARTHESCREEN
OFTHECONNECTEDDEVICE
This HDMI mode is only indicate the
screen of the iPhone, Android. Can‘t
operate by the touch screen of NX404
.OTE
$EPENDINGONTHEAPPLICATIONANDMODELOFTHE
MOBILEPHONETHEREISTHECASETHATBLACKFRAME
APPEARSAROUNDTHESCREEN
NX404
43
English
17. AUX
%XTERNALPERIPHERALDEVICESINCLUDINGAGAMECONSOLECAMCORDERNAVIGATIONUNITI0ODI0HONEETCCANBE
CONNECTEDTOTHE!58CONNECTORONTHEFRONTORBACKOFTHISUNITUSINGTHE!6MEDIACABLES
Owner’s Manual
Switching to AUX IN
4OUCH;!58=;!58=BUTTONON-AIN-ENUTOSELECTDESIREDMODEWHENUNITISREADING)FTHEEXTERNALDEVICE
CONNECTEDTO!58INPUTHAVEAUDIOSIGNALTHEUNITWILLBROADCASTAUDIOOFEXTERNALDEVICE0RESS-ENUBUTTONON
/PERATIONAL0ANELTORETURNTOTHE-AIN-ENU
9OUCANNOTDIRECTLYCONTROLEXTERNALDEVICESCONNECTEDTO!58INPUT
18. CAMERA INPUT OPERATIONS
Switching to Camera mode
4OUCH;#AMERA=BUTTONON-AIN-ENU
4HE,#$WILLDISPLAYTHEEXTERNALCAMERAVIDEO4HESCREENWILLDISPLAYh.O6IDEO3IGNALvMESSAGEIFAVALID
CAMERAISNOTCONNECTTOTHISHEADUNIT
0RESS-%.5BUTTONON/PERATIONAL0ANELTORETURNTOTHE-AIN-ENU
Setting Camera audio
3ELECTh/.vBUTTONINTHE#AMERA!UDIOSETTINGOFTHE'ENERALSETTING
4HEAUDIOFROMCAMERAWILLHEARDWHENBACKGEARISON4HEVOLUMECONTROLISAVAILABLEBUTNOTINDICATEDONTHE
SCREENDUETOTHESAFETY
3ELECTh-54%vBUTTONTHENMUTETHEAUDIOOFTHECURRENTMODEWHENBACKGEARISON
Note:
If the reverse cable is connected correctly to the car, the unit goes to camera mode automatically when the car is in
reverses.
As an additional safety feature, the audio from camera with built-in microphones can be heard through
the NX404.
44
NX404
2
1
4OUCHTHEBUTTONTOACCESSTHEFRONTSOURCE
4OUCHTHEBUTTONTOCLOSETHEREARSOURCE
Multi-Zone Operation
)NDEPENDENTSOURCESCANBEPLAYEDSIMULTANEOUSLY
ONTHEUNIT&OREXAMPLEA&-!-CONSOLECANBE
PLAYBACKONTHEFRONTSCREENWHILE$6$VIDEOIS
AVAILABLETOREARPASSENGERS"UTNOWCANTSELECT
$6$VIDEOINFRONT
Access Rear-Zone
DVD Video Rear Source Control Info
Mode.
4OUCHTHE2EARBUTTONON-AIN-ENUTOACCESSTHE
2EAR3OURCE
3ELECTASOURCETOPLAY
Exit Rear-Zone
Touch the 2-Zone off button to close the Rear
Source.
Note:
)FTHESOURCEISSELECTEDASTHEFRONTTHESOURCEIN
REARCANTBESELECTED
)FTHESOURCEISSELECTEDASTHEREARTHESOURCEIN
FRONTCANTBESELECTED
4OUCHTHE&RONTBUTTONTOACCESSTHEMAINMENUBUT
NOTCLOSETHE2EAR3OURCE
5PVDI#"$,CVUUPOUPSFUVSO
DVD Video Rear Source Control Direct
Mode.
DVD Video in Rear
8
./4%-OREDETAILPLEASEREFERTO$6$6IDEO&RONT
SOURCE
1
2
3
4
5
6
7
NX404
45
English
/PTIONBUTTON
3HOW#URSORKEYS
0REVIOUS#HAPTER&AST"ACKWARDBUTTON
0LAY0AUSEBUTTON
.EXT#HAPTER&AST&ORWARDBUTTON
%LAPSEDPLAYINGTIME
-ENU,ISTBUTTON
&RONT2EARBUTTON
)FTHESCREENDISPLAYS2EAR3OURCETOUCH&RONT2EAR
BUTTONTOSWITCHTO&RONT3OURCE
)FTHESCREENDISPLAYS&RONT3OURCETOUCH&RONT2EAR
BUTTONTOSWITCHTO2EAR3OURCE
Owner’s Manual
)FAMONITORISINSTALLEDINTHEREARZONEANDCONNECTED
TOTHEREARZONE!6OUTPUTPASSENGERSINTHEBACK
SEATCANWATCHTHE$6$I0OD6IDEO!58!58
VIDEOSEPARATELYFROMFRONTSOURCE
English
19. REAR SOURCE OPERATIONS
!58
iPod Video Rear Source ID3 Mode
English
Owner’s Manual
!58
iPod Video in Rear
iPod Video Rear Source Control Play
Mode
7
1
2
3
4
5
6
0REVIOUS4RACK&AST"ACKWARDBUTTON
0LAY0AUSEBUTTON
.EXT4RACK&AST&ORWARDBUTTON
0ROGRESSBAR
-ENU,ISTBUTTON
0RESSTHE-ENUBUTTONTODISPLAYTHEI0OD6IDEO
2EAR3OURCEMODESCREEN
2EPEATBUTTON
3AMEASI0ODFUNCTIONOFFRONTSOURCE
&RONT2EARBUTTON
)FTHESCREENDISPLAYS2EAR3OURCETOUCHTOSWITCHTO
&RONT3OURCE
)FTHESCREENDISPLAYS&RONT3OURCETOUCHTOSWITCHTO
2EAR3OURCE
46
NX404
./4%
)FTHESOURCEISSELECTEDASTHEFRONTTHESOURCEINREAR
CANTBESELECTED
)FTHESOURCEISSELECTEDASTHEREARTHESOURCEINFRONT
CANTBESELECTED
4OUCHTHE&RONTBUTTONTOACCESSTHEFRONTMAINMENU
BUTTHEREARSOURCEWILLKEEPRUNNING
English
English
20. SETTING OPERATIONS
4OUCH[
]BUTTONONTHE-AINMENUSCREEN
4HE3ETTINGMENUSCREENWILLBEDISPLAYED
Owner’s Manual
General Setup Menu
Time:3ETSYSTEMCLOCK
24-Hour Format: Set the time display mode.
Beep:4URNONORTURNOFFTHEBEEPCONlRMATIONSOUND
Bluetooth: 3ETTHE"LUETOOTH/NOR/FF
Wallpaper: #HOOSETHEDESIREDWALLPAPER
Input Aux Sense:!58INPUTSWITCHINCLUDING,OW
-IDDLE(IGH
System Language: 3ETTHE,ANGUAGEFORSYSTEM
SCREEN
Illumination Color: Set the illumination color on the
panel.
Select menu to be able to select from Shortcut
menu and drag it to left side area.
DivX® Registration: Display the information about
DivX® registration.
Tel Speaker: There are two options, Left and Right.
For example, if current setting is Right, when BT
phone is coming in, only right speaker can hear the
phone.
Pandora:There are two options, On and Off.
Camera Audio: There are three options, Off, On and
Mute.
Version: Display the software version information.
Note:
s4IMEAND(OUR&ORMATCANBEADJUSTEDWHENSET
THESYSTEMTIMENOTTOBESYNCHRONIZEDWITH'03LOCAL
time.
Video Setup Menu
NX404
47
English
Owner’s Manual
This menu includes:$6$7IDE3CREEN-ODE
$IMMER$IMMER-ODE
DVD Wide Screen Mode: Set the DVD wide screen
mode On or Off.
Dimmer: 3ET$IMMERVALUEFROMTO
Dimmer Mode: 4HEREARETHREEOPTIONS$AY.IGHT
AND!UTO
Navigation Setup Menu
Audio Setup Menu
4HISMENUINCLUDES'034IME.AVI)NTERRUPT6OICE
'UIDANCE
GPS Time:3ETTHESYSTEMTIMETOBESYNCHRONIZED
WITH'03LOCALTIMEORNOT
Navi Interrupt:4HEREARETHREECHOICES/N0OPUP
/FFh/Nv4HENAVIGATIONSCREENWILLCOVERTO!6
SCREENWHENREACHINGSOMEKEYPOINTh0OPUPv7HEN
SMALLTURNINFOWINDOWWILLPOPUPINTHETOPOFTHE
!6SCREENTOINDICATETHEKEYPOINTh/FFv4URNOFFTHIS
FUNCTION
Voice Guidance:4HEREARETHREECHOOSE/N-UTE
/FF
/N)NTERRUPTFUNCTIONOFVOICEGUIDANCEISON7HILE
INTERRUPTINGNOATTENUATEFUNCTIONOF!6SOUND
-UTE)NTERRUPTFUNCTIONOFVOICEGUIDANCEISON7HILE
INTERRUPTINGATTENUATEFUNCTIONSOUNDISON
/FF$ISABLETHENAVIGATIONVOICEGUIDANCE
4HISMENUINCLUDES"ALANCE&ADER"EAT%13UB
7OOFER#TRL3UB7OOFER0HASE(IGH0ASS&ILTER,OW
0ASS&ILTER,INE/UTAND-AGNA"ASS%8
Balance:#HOOSETHEDESIREDVOLUMEFORLEFTANDRIGHT
SPEAKER
Fader: #HOOSETHEDESIREDVOLUMEFORFRONTANDREAR
SPEAKER
Beat EQ:#HOOSETHEDESIREDMODE"ASS"OOST
)MPACT%XCITE#USTOMAND/&&
Subwoofer Ctrl:#HOOSETHEDESIREDSUBWOOFERGAIN
FROMTO
Subwoofer Phase: #HOOSETHE3UBWOOFER0HASE
NORMALORREVERSE
High Pass Filter: #HOOSETHEFREQUENCYABOUTTHE
HIGHPASSlLTERORENABLE4HEFREQUENCIESINCLUDE
(Z(ZAND(Z
Low Pass Filter:#HOOSETHEFREQUENCYABOUTTHELOW
PASSlLTERORENABLE4HEFREQUENCIESINCLUDE(Z
(ZAND(Z
Magna Bass EX:#HOOSETHELOUDNESS/NOR/FF
Others Setup Menu
Note:
/PTIONALCABLESOLDSEPARATELYISNECESSARYWHENYOU
use Audio line out.
48
NX404
This menu include: Set Password; Parental Control;
Audio Language; Subtitle Language; Screen
Calibration and Factory Default.
Set Password:3ETTHEPASSWORDFOR$6$PARENTAL
CONTROL
Parental Control:3ETTHERATINGOFTHEAGE)TCONTAINS
+ID3AFE'0'0'0'22.#!DULT
English
English
Audio Language:3ETTHE,ANGUAGEFOR$6$!UDIO
Subtitle Language:3ETTHE,ANGUAGEFOR$6$SUBTITLE
Blinking LED:3ETBLINKING,%$/NOR/FF
Screen Calibrate:4HEFUNCTIONOFITISTOSELECTTHE43
#ALIBRATE9%3OR./
Factory Default: 4HEFUNCTIONISTOSELECTTOLOAD
FACTORYDEFAULTORNOT
Owner’s Manual
Set the Anti-Theft code
)FYOURUNITISUNLOCKEDHOLDTHE[
]BUTTON
MORETHANSECONDSTHENTHE!NTI4HEFTSETTING
MODEWILLDISPLAY5SERSCANCHANGEANTITHEFT
CODE
4OUCH;9%3=BUTTONTHENUMERICALKEYPADIS
DISPLAYED%NTERTHENEWPASSWORDTWICETHENANTI
THEFTCODEISSETANDYOURUNITISSECURED
7HENTHE!NTITHEFTISh/NvYOUNEEDENTERCORRECT
!NTITHEFTCODETOTURNTHEUNITON)FYOUENTER
WRONGCODETHREETIMESTHEUNITISLOCKEDANDMUST
BEUNLOCKEDBYTHEPROFESSIONALS
)FYOURUNITISSECUREDHOLDTHE;;
=BUTTONMORE
THANSECONDSTHENTHE!NTI4HEFTSETTINGMODE
WILLDISPLAY4HENUMERICALKEYPADISDISPLAYED
ENTERTHERIGHTCODETOUNLOCK
Note:
)FTHEANTITHEFTCODEISLOSTORFORGOTTENACHARGEWILL
be incurred at the owner’s expense by a Clarion service
STATIONTOUNLOCKTHE.8
NX404
49
English
21. TROUBLESHOOTING
GENERAL
Owner’s Manual
Problem
Cause
Measure
Power does not turn on. (No
sound is produced.)
Fuse is blown.
Replace with a fuse of the
same amperage. If the fuse
blows again, consult your store
of purchase.
Incorrect wiring.
Consult your installation center.
The microprocessor has
malfunctioned due to noise,
etc.
Press the reset button with a
thin rod.
Note:
When the Reset button is
ÈʽË˽¼ƓÌÍÊÆÇŰÌÀ½
power.
* When the Reset button is
pressed, frequencies of radio
stations, titles, etc. stored in
memory are cleared.
Direct rays of the sun fall on
the light-receptive part of the
remote control unit.
When direct rays of the sun fall
on the light-receptive part of
the remote control unit, it may
not work.
The battery of the remote
control unit is dead or there is
no battery in the remote control
unit.
Check the battery of the remote
control unit.
Problem
Cause
Measure
Disc cannot be loaded.
A disc is already loaded.
Eject the disc before loading
the new one.
There is foreign matter already
in the disc slot.
Remove the foreign matter, or
consult a service station.
Disc is dirty.
Clean the disc with a soft cloth.
Disc is heavily scratched or
warped.
Replace with a disc in good
condition.
Sound is bad directly after
power is turned on.
Condensation may form on the
internal lens when the car is
parked in a humid place.
Let dry for about 1 hour with the
power on.
Video images are not
displayed.
The parking brake is not
engaged.
Check that the parking brake is
engaged.
Disc cannot play with
the display “PARENTAL
VIOLATION” shown.
Feature exceeds set parental
level.
Release the view limitation or
change the parental level.
See the subsection “Setting up
the parental level”
Nothing happens when buttons
are pressed.
Display is not accurate.
The remote control unit does
not work.
DVD PLAYER
Sound skips or is noisy.
50
NX404
Cause
USB device cannot be inserted. The USB device has been
inserted with wrong direction.
Measure
Reversing the connection
direction of the USB device, try
it again.
Owner’s Manual
The USB connector is broken.
Replace with a new USB
device.
The USB device is damaged.
Connectors are loose.
Disconnect the USB device
and reconnect. If the device
is still not recognized, try
ʽÈĹ»ÁÆ¿ÏÁÌÀ¹¼ÁŰ½Ê½ÆÌ
device.
No sound heard with the
display “NO FILE” shown.
ÇˀƯŲĽÁËËÌÇʽ¼ÁÆ
the USB device.
ÌÇʽÌÀ½Ë½ŲĽËÈÊÇȽÊÄÑÁÆÌÀ½
USB device.
Sound skips or is noisy.
ˀƯŲĽ˹ʽÆÇÌ
encoded properly.
˽ˀƯŲĽ˽ƻǼ½¼
properly.
The video image of iPod/
iPhone is disturbed.
The TV Signal setting of the
iPod/iPhone is not set correctly.
Set the TV Signal setting
(NTSC/PAL) of the iPod/iPhone
correctly.
Problem
Cause
Measure
Cannot pair the Bluetooth
enable device with the car
audio system.
The device does not support
ÌÀ½ÈÊÇŲĽËʽÉÍÁʽ¼¾ÇÊÌÀ½
system.
Use another device to connect.
The Bluetooth function of the
device is not enabled.
Refer to the user manual of the
device for how to enable the
function.
The Bluetooth reception is
poor.
Move the device closer to the
car audio system or remove
any obstacle between the
device and the system.
USB device is not recognized.
Bluetooth
The audio quality is poor after
connection with a Bluetooth
enabled device.
NX404
English
Problem
English
USB DEVICE
51
TFT screen
English
Owner’s Manual
Problem
Cause
Measure
The image is not displayed.
The parking brake is not
engaged.
Check that the parking brake is
engaged.
The display is dark.
The Dimmer control is too low.
Adjust the Dimmer properly.
The operating condition is not
good.
The temperature inside the
vehicle may be 0°C or lower. Set
to an appropriate temperature
(25°C or so) and check it again.
The headlight of the vehicle
is lit
The display is made dark
at night to prevent the glare
(When the headlight of the
vehicle is lit in the daytime, the
display gets dark).
There are red, green, and blue
points in display.
52
NX404
--------------------
This is not a failure, but a
phenomenon peculiar to a
liquid crystal panel (The liquid
crystal panel is produced
according to technology with
very high precision. Note that,
ÌÀÇÍ¿ÀÌÀ½Ê½¹Ê½½Ű½»ÌÁν
pixels of 99.99% or more, pixel
missing or normally lit pixels
account for 0.01%).
English
English
22. ERROR DISPLAY
If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
Owner’s Manual
DVD PLAYER
Display
Cause
Measure
BAD DISC
A disc is caught inside the DVD
deck and is not ejected.
This is a failure of DVD deck’s
mechanism and consult your
store of purchase.
BAD DISC
A disc cannot be played due to
scratches, etc.
Replace with a non-scratched,
non-warped disc.
BAD DISC
A disc is loaded upside- down
inside the DVD deck and does
not play.
Eject the disc then reload it
properly.
PARENTAL VIOLATION
Parental level error
Set the correct Parental level.
Disc Region incorrect
Region code error
Eject the disc, and replace
correct region code disc.
NX404
53
English
23. SPECIFICATIONS
Owner’s Manual
FM Tuner
!$0!DVANCED!UDIO$ISTRIBUTION0ROlLE
&REQUENCY2ANGE -(ZTO-(Z
!62#0!62EMOTE#ONTROL0ROlLE
5SABLE3ENSITIVITYD"«6
0"!00HONE"OOK!CCESS0ROlLE
3TEREO3EPARATION D"K(Z
3003ERIAL0ORT0ROlLE
&REQUENCY2ESPONSE(ZTOK(Z
0OWER#LASS 2
AM Tuner
USB
&REQUENCY2ANGEK(ZTOK(Z
3PECIlCATION53"&3
5SABLE3ENSITIVITYD"«6
0LAYABLE!UDIOFORMAT
-07-!!!#&,!#
DVD Player System
0LAYABLE6IDEOFORMAT
$IGITAL6ERSATILE$ISC3YSTEMWITH#$$!CAPABLE
!6)-0-0'-0%'GP
5SABLEDISCS
$6$VIDEODISC#OMPACTDISC
General
&REQUENCY2ESPONSE(ZTOK(Z
0OWERSOURCEVOLTAGE
3IGNAL.OISE2ATIODB!72EF
6$#TO6ALLOWABLE
$ISTORTION
'ROUND.EGATIVE
6IDEOSYSTEM.43#0!,
#URRENTCONSUMPTION! 7
!UTO!NTENNA2ATED#URRENTM!LESS
Audio/Video Input
!UDIOINPUTVOLTAGE d6RMS
6IDEOINPUTVOLTAGE6PP !UDIOINPUTSENSITIVITYAT6OUTPUT
(IGH M6RMS
-ID M6RMS
,OW 6RMS
Audio/Video output
6IDEOOUTPUTVOLTAGE6PP 3CREEN3IZEvWIDETYPE
0IXELS
2ESOLUTIONXX2'"
Bluetooth
3PECIlCATION"LUETOOTH6ER%$2
0ROlLE (&0(ANDS&REE0ROlLE
54
(30(EADSET0ROlLE
NX404
Note:
ƹ Ƚ»ÁŲ»¹ÌÁÇÆ˹Ƽ¼½ËÁ¿Æ¹Ê½Ëͺ½»Ì
to change without notice for further
improvement.
Power Output:
=839^)NGTTKRYGZœ
GTJʇ:.*4
Signal to Noise Ratio:
J('XKLKXKTIK=OTZUœ
English
English
4’’ 1 0 0 m m
6.8’’ 172mm
Owner’s Manual
6.4’’ 165mm
7’’ 1 7 8 m m
.8DIMENSIONS
.8WEIGHTKG
NX404
55
English
24. WIRE CONNECTION GUIDE
Owner’s Manual
Note:
ƹ ½¾ÇʽÁÆË̹ÄÄÁÆ¿Ɠº½ËÍʽÌǼÁË»ÇÆƽ»ÌÌÀ½Æ½¿¹ÌÁν»¹ºÄ½Ç¾ÌÀ½»¹Êº¹Ì̽ÊÑƖ
ƹ ÆÌÀ½ÇÈÌÁÇƹļ½ÎÁ»½ËƓÌÀ½»¹ºÄ½Ë¹Æ¼ÌÀ½ÇÆƽ»ÌÇÊ»¹ºÄ½Ë¹Ê½Ë½È¹Ê¹Ì½ÄÑƘËÇļ
items.
ƹ À½Æ»ÇÆƽ»ÌÌÀ½»¹ºÄ½Ɠº½ËÍʽÌÇŲÐÏÁÌÀÌÀ½»¹ºÄ½ÀÇļ½Ê¹Æ¼¹»ÀÁƽ˻ʽÏƼʿÐ
4).
NX404
HDMI cable holder
2EFERTO
PAGE
CCA-750(sold separately)
HDMI CABLE
MIC
SUBWOOFER2
Black
Gray
Black
Gray
SUBWOOFER1
SWI
Red
Red
White
White White Red
Front
Right
Rear
Right
Front
Left
Rear
Left
AUX2 AUDIO IN RCH
Red
AUX2 AUDIO IN LCH
White
AUX2 VIDEO IN
Yellow
REAR LCH
White
REAR RCH
Red
For Rear zone
VIDEO OUT
CAMERA
4-Channel Amplifier
56
NX404
Yellow
Yellow
English
English
Owner’s Manual
Yellow
Connect directly
V to battery
Black
Ground
Purple
PurpleBlack
Red
Gray
GrayBlack
White
WhiteBlack
Green
GreenBlack
BlueWhite
OrangeWhite
Rear right Rear right V accessory
Front right Front right Front left
Front left
Rear left
Rear left
Amplifier turnon cord
Illumination
Blue
Auto antenna
Brown
Phone interrupt
Grassgreen
PurpleWhite
Parking brake cord
Reverse gear cord
1RWH
*1: Connecting the PHONE INTERRUPT terminal
The phone interrupt will mute the audio if the lead receives a negative or ground signal.
NX404
57
Clarion Co., Ltd.
All Rights Reserved. Copyright © 2014: Clarion Co., Ltd.
Owner’s manual
NX404
US English
Thank you for choosing the Clarion NX404 as your navigator. Start using Clarion NX404 right
away. This document is the detailed description of the navigation software. You can easily discover
Clarion Mobile Map while you are using it; however, we still recommend that you read this manual
to fully understand the features and functions.
Easy navigation map updates
It is easy to keep the navigation system up to date. Simply download new map data from Clarion’s
portal site, store them on a microSD card and insert it into the Clarion NX404 via the front card
slot.
Latest Map Guarantee
When you start using the product, you have 30 days to download the latest available map free of
charge.
2 NX404 English
Table of contents
1 Warnings and Safety information ........................................................................................... 6
2 Getting started ........................................................................................................................... 7
2.1 Navigation menu ................................................................................................................................. 8
2.2 Buttons and other controls on the screen ........................................................................................... 9
2.2.1 Using keyboards........................................................................................................................................ 10
2.2.2 Beyond single screen tap........................................................................................................................... 11
2.3 Map screen ....................................................................................................................................... 12
2.3.1 Navigating on the map .............................................................................................................................. 12
2.3.2 Position markers........................................................................................................................................ 14
2.3.2.1 Vehimarker and Lock-on-Road ........................................................................................................................... 14
2.3.2.2 Selected map location (Cursor) and selected map object ................................................................................... 14
2.3.3 Objects on the map.................................................................................................................................... 15
2.3.3.1 Streets and roads ................................................................................................................................................ 15
2.3.3.2 Turn preview and Next street .............................................................................................................................. 15
2.3.3.3 Lane information and Signposts ......................................................................................................................... 16
2.3.3.4 Junction view ...................................................................................................................................................... 17
2.3.3.5 Freeway exit services .......................................................................................................................................... 17
2.3.3.6 3D object types ................................................................................................................................................... 18
2.3.3.7 Elements of the active route ................................................................................................................................ 18
2.3.4 Manipulating the map ............................................................................................................................... 19
2.3.5 Quick menu ............................................................................................................................................... 20
2.3.6 Checking the details of the current position (Where Am I?)..................................................................... 23
3 On-road navigation ................................................................................................................. 25
3.1 Selecting the destination of a route .................................................................................................. 25
3.1.1 Combined Search ...................................................................................................................................... 25
3.1.1.1 Combined Search - Navigating to a recent destination (History) ....................................................................... 28
3.1.1.2 Combined Search - Navigating to a Favorite destination ................................................................................... 29
3.1.1.3 Combined Search - Navigating to an address ..................................................................................................... 30
3.1.1.4 Combined Search - Navigating to an intersection .............................................................................................. 31
3.1.1.5 Combined Search - Navigating to a Place of Interest ......................................................................................... 32
3.1.1.6 Combined Search - Navigating to a Place of Interest by its category................................................................. 33
3.1.2 Entering an address or a part of the address .............................................................................................. 34
3.1.2.1 Entering an address (United States) ................................................................................................................... 35
3.1.2.2 Entering an address (Canada) ............................................................................................................................ 37
3.1.2.3 Entering an address starting with the street name (in the United States only) ................................................... 39
3.1.2.5 Entering the midpoint of a street as the destination ............................................................................................ 42
3.1.2.6 Selecting an intersection as the destination ........................................................................................................ 43
NX404 English 3
3.1.2.7 Selecting a city/town center as the destination ................................................................................................... 45
3.1.2.8 Entering an address with a ZIP code .................................................................................................................. 46
3.1.2.9 Tips on entering addresses quickly ..................................................................................................................... 48
3.1.3 Selecting the destination from the Places of Interest ................................................................................ 49
3.1.3.1 Quick search for a Place of Interest ................................................................................................................... 49
3.1.3.2 Searching for a Place of Interest using preset categories ................................................................................... 51
3.1.3.3 Searching for a Place of Interest by category ..................................................................................................... 53
3.1.3.4 Searching for a Place of Interest by name .......................................................................................................... 56
3.1.3.5 Searching for a Place of Interest by its phone number ....................................................................................... 59
3.1.3.6 Selecting nearby assistance from 'Where Am I?' ................................................................................................ 60
3.1.4 Selecting a map location as the destination ............................................................................................... 62
3.1.5 Selecting the destination from your Favorites........................................................................................... 62
3.1.6 Selecting your Home location ................................................................................................................... 64
3.1.7 Selecting a recent destination from the History ........................................................................................ 65
3.1.8 Entering the coordinate of the destination ................................................................................................ 66
3.1.9 Building a route from the list of destinations (Create Route) ................................................................... 67
3.2 Viewing the entire route on the map ................................................................................................. 68
3.3 Checking route parameters and accessing route related functions.................................................. 69
3.4 Modifying the route .......................................................................................................................... 70
3.4.1 Selecting a new destination when already having a route: New Route, Waypoint or Final Destination .. 70
3.4.2 Setting a new starting position for the route ............................................................................................. 70
3.4.3 Editing the list of destinations (Edit Route) .............................................................................................. 72
3.4.4 Pausing the active route ............................................................................................................................ 73
3.4.5 Canceling the active route ......................................................................................................................... 73
3.4.6 Checking route alternatives when planning the route ............................................................................... 73
3.4.7 Checking route alternatives for an existing route ...................................................................................... 74
3.4.8 Changing the road types used in route planning ....................................................................................... 76
3.5 Saving a location as a Favorite destination ..................................................................................... 77
3.5.1 Editing the details of a Favorite destination .............................................................................................. 77
3.6 Saving a map location as an alert point ........................................................................................... 78
3.7 Editing an alert point........................................................................................................................ 79
3.8 Watching the simulation of the route ................................................................................................ 80
4 Off-road navigation................................................................................................................. 82
4.1 Selecting the destination of the route ............................................................................................... 82
4.2 Navigating in off-road mode............................................................................................................. 82
5 Reference Guide ...................................................................................................................... 83
5.1 Concepts ........................................................................................................................................... 83
5.1.1 Smart Zoom .............................................................................................................................................. 83
4 NX404 English
5.1.2 Daytime and night color themes ............................................................................................................... 83
5.1.3 Tunnel view .............................................................................................................................................. 84
5.1.4 Route calculation and recalculation .......................................................................................................... 84
5.1.5 Green routing ............................................................................................................................................ 85
5.1.6 Road safety cameras and other proximity alert points .............................................................................. 86
5.1.7 Speed limit warning .................................................................................................................................. 87
5.2 'More' menu ...................................................................................................................................... 88
5.3 Settings menu .................................................................................................................................... 89
5.3.1 Sound and Warnings ................................................................................................................................. 91
5.3.2 Customize Quick menu ............................................................................................................................. 93
5.3.3 Route settings ............................................................................................................................................ 93
5.3.4 User profiles .............................................................................................................................................. 96
5.3.5 Map settings .............................................................................................................................................. 97
5.3.6 Visual guidance settings............................................................................................................................ 98
5.3.7 Display settings ....................................................................................................................................... 100
5.3.8 Regional settings ..................................................................................................................................... 100
5.3.9 Trip monitor settings ............................................................................................................................... 100
5.3.10 Log collection settings .......................................................................................................................... 101
6 Glossary .................................................................................................................................. 102
7 End User License Agreement ............................................................................................... 104
8 Copyright note ....................................................................................................................... 110
NX404 English 5
1 Warnings and Safety information
The navigation system helps you find your way to your destination with the built-in GPS receiver. Clarion
Mobile Map does not transmit your GPS position; others cannot track you.
If you accept it when first using the application, Clarion Mobile Map collects usage information and GPS
logs that may be used for improving the application and the quality and coverage of maps. The data is
processed anonymously; no one will be able to track any personal information. If you change your mind
later, you can enable or disable the log collection in Settings (page 101).
It is important that you look at the display only when it is safe to do so. If you are the driver of the vehicle,
we recommend that you operate Clarion Mobile Map before you start your journey. Plan the route before
your departure and stop if you need to change the route.
You must obey the traffic signs and follow the road geometry. If you deviate from the recommended
route, Clarion Mobile Map changes the instructions accordingly.
Never place Clarion NX404 where it obstructs the driver's view, where it is in the deployment zone of an
airbag or where it might cause injuries in an accident.
For more information, consult the End User License Agreement (page 104).
6 NX404 English
2 Getting started
Clarion Mobile Map is optimized for in-car use. You can use it easily by tapping the screen buttons and
the map with your fingertips.
When using the navigation software for the first time, an initial setup process starts automatically. Do as
follows:
1.
Select the written language of the application interface. Later you can change it in Regional
settings (page 100).
2.
Read the End User License Agreement. Tap
3.
You are now asked whether you allow the software to collect usage information and GPS logs that
may be used for improving the application and the quality and coverage of maps. Tap
to continue.
to allow the anonymous statistics or disable this function. Later you can turn
them on or off individually in Log collection settings (page 101).
to continue.
4.
The Configuration wizard starts. Tap
5.
Select the language and speaker used for voice guidance messages. Later you can change it in
Sound and Warnings settings (page 100).
NX404 English 7
6.
If needed, modify the time format and unit settings. Later you can change them in Regional
settings (page 100).
7.
If needed, modify the default route planning options. Later you can change them in Route settings
(page 93).
8.
The initial setup is now complete. The Configuration wizard can be restarted later from the Settings
menu (page 89).
After the initial setup, the Navigation menu appears and you can start using Clarion Mobile Map.
2.1 Navigation menu
You can reach all parts of Clarion Mobile Map from the Navigation menu.
You have the following options:
•
Tap
to select your destination by entering an address or selecting a place of
interest, a location on the map or one of your Favorite destinations. You can also look up your
recent destinations from the Smart History or enter a coordinate.
•
to display the route parameters and the route in its full length on the map.
Tap
You can also perform route-related actions such as editing or canceling your route, setting a start
point for the route, picking route alternatives, avoiding parts of the route, simulating navigation or
adding the destination to your Favorites.
8 NX404 English
•
Tap
•
to start navigating on the map. The button itself is a miniature live map
Tap
that shows your current position, the recommended route and the surrounding map area. Tap the
button to enlarge the map to the full screen.
to simulate demo routes or to run some additional applications.
2.2 Buttons and other controls on the screen
When you are using Clarion Mobile Map, you usually tap buttons on the touch screen.
You only need to confirm selections or changes if the application needs to restart, it needs to perform a
major reconfiguration, or you are about to lose some of your data or settings. Otherwise, Clarion Mobile
Map saves your selections and applies the new settings without confirmation as soon as you use the
controls.
Type
Example
Description
How to use it
Button
Tap it to initiate a function, to
Tap it once.
open a new screen, or to set a
parameter.
Button
with value
Some buttons display the
current value of a field or
setting. Tap the button to
change the value. After the
change, the new value is
shown on the button.
Icon
List
Shows status information.
Tap it once.
Some icons also function as a
button. Tap them once.
When you need to select from Grab the list anywhere and slide
several options, they appear in your finger up or down.
a list.
Depending on the speed of the
sliding, the list will scroll fast or
slow, only a bit or till the end.
Alternatively, move between
pages with the
and
buttons and tap the value that
you want.
Radio
button
When there are only a few
choices, radio buttons may be
used instead of lists. Only one
value can be selected.
Tap one of the buttons to select
a new value.
NX404 English 9
Switch
When there are only two
Tap it to turn the switch on or off.
choices, a checkmark shows
whether the feature is enabled.
Slider
When a feature can be set to
different values in a range,
Clarion Mobile Map shows an
indicator on a gauge that
displays and sets the value.
Virtual
keyboard
Alphabetic and alphanumeric
keyboards to enter text and
numbers.
•
Drag the handle to move
the slider to its new
position.
•
Tap the slider where you
want the handle to
appear; the thumb jumps
there.
Each key is a touch screen
button.
2.2.1 Using keyboards
You only need to enter letters or numbers when you cannot avoid it. You can type with your fingertips on
the full-screen keyboards and you can switch between various keyboard layouts, for example English,
Greek or numerical.
Task
Switching to another keyboard
layout, for example from an
English keyboard to a Greek
keyboard
Instruction
Tap the
layout from the list.
button and select the new keyboard
Correcting your entry on the
keyboard
Tap
to remove the unneeded character(s).
Tap and hold the button to delete several characters or the entire input
string.
Entering a space, for example
between a first name and a
family name or in multi-word
street names
Entering upper and lower case
letters
Tap the
button at the bottom center of the screen.
When entering a text, the first character appears in upper case while
the rest of the text is in lower case. Tap
to enter an upper case
letter or tap twice to turn on Caps Lock. Tap again and lower case
letters return.
10 NX404 English
Entering numbers and symbols
Tap
to switch to a keyboard offering numeric and symbol
characters.
Finalizing the keyboard entry
(accepting the suggested search
Tap
result)
Finalizing the keyboard entry
(opening the list of search
results)
.
Tap
.
Tap
.
Tap
.
Finalizing the keyboard entry
(saving your input)
Canceling the keyboard entry
(returning to the previous screen)
2.2.2 Beyond single screen tap
You usually need to tap the screen only once. However, some useful features can be accessed with
combined touch screen tapping. Those are the following:
Action
Tapping and
holding the screen
Details
Tap and keep pressing the following buttons to reach extra functions:
•
Tap and hold
appears.
•
Tap and hold any of the
,
,
,
,
, and
buttons on the Map screen: you can rotate, tilt or scale the map continuously.
•
Tap and hold
quickly.
on keyboard screens: you can delete several characters
•
Tap and hold
or
on list and menu screens: the Map screen
in long lists: you can scroll pages continuously.
NX404 English 11
Gestures
(drag&drop)
You need to drag and drop the screen only in cases like:
•
Moving the handle on a slider.
•
Scrolling the list: grab the list anywhere and slide your finger up or down.
Depending on the speed of the sliding, the list will scroll fast or slow, only a bit
or till the end.
•
Moving the map in map browsing mode: grab the map, and move it in the
desired direction.
2.3 Map screen
2.3.1 Navigating on the map
The Map screen is the most frequently used screen of Clarion Mobile Map.
button.
A small live map is displayed on the Navigation menu, as a part of the
To enlarge this small map and open the Map screen, tap
.
This map shows the current position (the Vehimarker, a blue arrow by default), the recommended route
(an orange line), and the surrounding map area.
When there is no GPS position, the Vehimarker is transparent. It shows your last known position.
You see colored dots circling around a satellite symbol in the top left corner. The more green dots you
see, the closer you are to get the valid GPS position.
12 NX404 English
When GPS position is available, the Vehimarker is displayed in full color, now showing your current
position.
There are screen buttons and data fields on the screen to help you navigate. During navigation, the
screen shows route information.
button gives quick access to frequently used functions. You can change the available
The
functions in Settings.
By default, only one data field is displayed in the bottom right corner. Tap this field to see all route data
fields. Tap any of the data fields to suppress others and display only the selected one.
The data fields are different when you are navigating an active route and when you have no specified
destination (the orange line is not displayed).
Default data fields when cruising without a destination (tap and hold any of the fields to change its value):
Field
Description
Shows your current speed given by the GPS receiver.
Shows the speed limit of the current road if the map contains it.
Shows the current time corrected with time zone offset. The accurate time comes
from the GPS satellites, and the time zone information comes from the map or it can
be set manually in Regional settings.
(The current time is always displayed in the top left corner of menu screens.)
NX404 English 13
Default data fields when navigating a route (tap and hold any of the fields to change its value):
Field
Description
Shows the distance you need to travel on the route before reaching your final
destination.
Shows the time needed to reach the final destination of the route based on
information available for the remaining segments of the route.
The calculation cannot take into account traffic jams and other possible delays.
Shows the estimated arrival time at the final destination of the route based on
information available for the remaining segments of the route.
The calculation cannot take into account traffic jams and other possible delays.
2.3.2 Position markers
2.3.2.1 Vehimarker and Lock-on-Road
When your GPS position is available, Clarion Mobile Map marks your current position with the
Vehimarker. By default, this marker is a blue arrow, but you can change this icon in Settings.
When on-road navigation is selected, the Vehimarker may not show your exact GPS position and
heading. If roads are near, it is aligned to the nearest road to suppress GPS position errors, and the
direction of the icon is aligned to the direction of the road.
If you select off-road navigation: The Vehimarker is at your exact GPS position. The direction of the icon
shows your current heading.
2.3.2.2 Selected map location (Cursor) and selected map object
You can mark a map location in the following ways:
•
Tap the map when navigating,
•
Tap the map when you are asked to confirm the destination at the end of a search, or
•
Tap the map in Find on Map (page 62)
When a map location is selected, the Cursor appears at the selected point on the map. The Cursor is
displayed with a radiating red dot (
) to make it visible at all zoom levels.
The location of the Cursor can be used as the destination of the route, a new alert point, you can search
for Places around it, or you can save this location as one of your Favorite destinations.
You can also select some of the objects on the map. If you tap the map at the icon of a Place of Interest
or an alert point, the object will be selected (you see a red circling border around the object), and you can
get information about this object or use it as a route point.
14 NX404 English
2.3.3 Objects on the map
2.3.3.1 Streets and roads
Clarion Mobile Map shows the streets in a way that is similar to how the paper road maps show them.
Their width and colors correspond to their importance: you can easily tell a freeway from a small street.
2.3.3.2 Turn preview and Next street
When navigating a route, the top section of the Map screen shows information about the next route event
(maneuver) and the next street or the next city/town.
There is a field in the top left corner that displays the next maneuver. Both the type of the event (turn,
traffic circle, exiting freeway, etc.) and its distance from the current position are displayed.
A smaller icon shows the type of the second next maneuver if it is near the first one. Otherwise, only the
next maneuver is displayed.
Most of these icons are very intuitive. The following table lists some of the frequently shown route events.
The same symbols are used in both fields:
Icon
Description
Turn left.
Turn right.
Turn back.
Bear right.
Turn sharp left.
NX404 English 15
Keep left.
Continue straight in the intersection.
Go left on the traffic circle, 3rd exit (next maneuver).
Enter traffic circle (second next maneuver).
Enter freeway.
Exit freeway.
Board ferry.
Leave ferry.
Approaching a waypoint.
Approaching the destination.
2.3.3.3 Lane information and Signposts
When navigating on multilane roads, it is important to take the appropriate lane in order to follow the
recommended route. If lane information is available in the map data, Clarion Mobile Map displays the
lanes and their directions using small arrows at the bottom of the map. Highlighted arrows represent the
lanes and direction you need to take.
Where additional information is available, signposts substitute arrows. Signposts are displayed at the top
of the map. The color and style of the signposts are similar to the real ones you can see above road or by
the roadside. They show the available destinations and the number of the road the lane leads to.
All signposts look similar when cruising (when there is no recommended route). When navigating a route,
only the signpost that points to the lane(s) to be taken is displayed in vivid colors; all others are darker.
If you want to hide the currently displayed signposts, tap any of them and the normal Map screen returns
until new signpost information is received.
16 NX404 English
2.3.3.4 Junction view
If you are approaching a freeway exit or a complex intersection and the needed information exists, the
map is replaced with a 3D view of the junction. The lanes you need to take are displayed with arrows. At
the top of the screen road signs show you additional information.
If you want to hide the currently displayed junction, tap the picture and the Map screen returns.
2.3.3.5 Freeway exit services
You may need a gas station or a restaurant during your journey. This feature displays a new button on
the map when you are driving on freeways.
Tap this button to open a panel with the details of the next few exits or service stations.
Tap any of them to display the exit area on the map. You can now easily add this exit as a waypoint to
your route if needed.
If you want to display other types of Places for the exits, you can change the icons in Visual Guidance
settings (page 98).
NX404 English 17
2.3.3.6 3D object types
Clarion Mobile Map supports the following 3D object types:
Type
3D terrain
Description
3D terrain map data shows changes in terrain, elevations or depressions in the land
when you view the map in 2D, and use it to plot the route map in 3D when you
navigate. Hills and mountains are shown in the background of the 3D map, and
illustrated by color and shading on the 2D map.
Elevated roads
3D landmarks
3D buildings
Complex intersections and vertically isolated roads (such as overpasses or bridges) are
displayed in 3D.
Landmarks are 3D artistic or block representations of prominent or well-known objects.
3D block representation of full city building data containing actual building size and
position on the map.
2.3.3.7 Elements of the active route
Clarion Mobile Map shows the route in the following way:
Symbol
Name
Current GPS position
and Start point
Description
Your current position displayed on the map. If roads are near, it is
aligned to the nearest road.
Normally if GPS position is available, the route starts from the current
position. If there is no valid GPS position, Clarion Mobile Map uses
the last known position as the start point.
Waypoint (intermediate
An intermediate destination of the route before reaching the final
destination)
destination.
Destination (end point)
Route color
Streets and roads that
are excluded from the
navigation
18 NX404 English
The final destination of the route.
The route always stands out with its color on the map, both in daytime
and in night color mode.
You can choose whether you want to use or avoid certain road types
(page 93). However, when Clarion Mobile Map cannot avoid such
roads, the route will include them and it will show them in a color that
is different from the route color.
2.3.4 Manipulating the map
Tap the map anywhere to browse it during navigation. The map stops following the current position (the
Vehimarker, a blue arrow by default, is not locked in a fix position on the screen any more) and control
buttons appear to help you modify the map view.
Action
Moving the
map with
drag&drop
Button(s)
No buttons
Zooming in
and out
Description
You can move the map in any direction: tap and hold the map, and
move your finger towards the direction you want to move the map.
Changes how much of the map is displayed on the screen.
,
Clarion Mobile Map uses high-quality vector maps that let you
examine the map at various zoom levels, always with optimized
content. It always displays street names and other text with the
same font size, never upside-down, and you only see the streets
and objects that you need.
Map scaling has a limit in 3D map view mode. If you zoom out
further, the map switches to 2D view mode.
Tap the button once to modify the view in large steps, or tap and
hold the button to modify it continuously and smoothly.
Tilting up and
down
Changes the vertical view angle of the map in 3D mode.
,
Rotating left
and right
Changes the horizontal view angle of the map.
,
2D or 3D view
,
Compass in
2D map view
mode
Compass in
3D map view
mode
Tap the button once to modify the view in large steps, or tap and
hold the button to modify it continuously and smoothly.
,
,
Tap the button once to modify the view in large steps, or tap and
hold the button to modify it continuously and smoothly.
Tap this button to switch between the 3D perspective and 2D topdown map view modes.
The direction of the compass shows North. Tap the button to switch
to North-up view, and then tap again to rotate the map in the
previous direction.
The direction of the compass shows North. Tap the button to switch
to North-up view, and then tap again to rotate the map in the
previous direction.
NX404 English 19
Location
information
Return to
normal
navigation
Tap this button to open a new screen with information about the
selected map point, the Cursor.
Tap this button to move the map back to follow the current GPS
position. Automatic map rotation is also re-enabled.
The map manipulation buttons disappear and navigation continues.
Additional
options
Select
destination
Tap this button to open a list of additional features like saving the
Cursor as a Favorite destination, or searching for Places around
the Cursor.
Tap this button to select the Cursor as a new destination. The route
is automatically calculated.
2.3.5 Quick menu
The Quick menu is a selection of controls and functions that are frequently needed during navigation. It
can be opened directly from the Map screen by tapping
.
The menu will close after a few seconds of inactivity or if you tap
.
Most of these functions are shortcuts. They are accessible from the menu system.
There are more functions available than the number of buttons in the menu. In Settings, you can choose
the function of each button (page 93). The following options are available:
Button
Description
This button opens the Combined Search function that allows you
to search addresses, Places, Favorite and recent destinations by
name in one unified environment.
Shortcut for
Destination (page 25)
Destination / Find Places /
This function lets you search for a Place by its name. The search
Quick Search (page 49)
is carried out either along your route or around your current
location if there is no route calculated.
20 NX404 English
This button opens the list of your Favorite destinations.
This button opens the History list. You can select one of your
previous destinations.
This button opens the route editing function.
Find / Favorite (page 62)
Find / History (page 65)
My Route / Edit Route
This button opens the route related settings.
More / Settings / Route
Settings (page 93)
This button opens the map related settings.
More / Settings / Map
Settings (page 97)
Tap the Current Street field
This button opens a special screen with information about the
on the Map screen
current position and a button to search for nearby emergency or
roadside assistance. For details, see the next chapter.
My Route / Cancel Route
This button cancels the route and stops navigation. The button is
(page 73)
replaced with the next one if waypoints are given.
This button skips the next waypoint from the route.
n/a
My Route / Overview (page
This button opens a 2D map scaled and positioned to show the
68)
entire route.
This button opens the Visual Guidance settings screen.
This button lets you bypass parts of the recommended route.
More / Settings / Visual
Guidance (page 98)
My Route / Avoidances
More / Trip Monitor (page
This button opens the Trip Monitor screen where you can manage
88)
your previously saved trip logs and track logs.
NX404 English 21
This button opens the list of maneuvers (the itinerary).
Tap the top of the Map
screen during navigation.
With this function you can save the active route for later use.
My Route / More / Save
Route
My Route / More / Load
With this function you can replace the active route with a
Route
previously saved route.
Find / Find Places (page
With this function you can search for Places of Interest in various
49)
different ways.
My Route / More / Simulate
This button opens the Map screen and starts simulating the active
Navigation (page 80)
route.
Tap the top of the Map
This button opens the GPS Information screen with satellite
screen when there is no
position and signal strength information.
GPS reception
This button offers your Home location as a destination.
This button opens the parameters of the selected Vehicle profile.
22 NX404 English
More / Settings / Route
(page 93)
2.3.6 Checking the details of the current position (Where Am I?)
This screen contains information about the current position (or about the last known position if GPS
reception is not available) and a button to search for useful Places nearby.
You can access this screen from the map in one of the following ways:
•
If the current street is displayed below the Vehimarker (the current position on the map), tap it to
open the Where Am I? screen.
•
Open the Quick menu and tap the
button.
Information on this screen:
•
,
•
: Altitude (elevation information coming from the GPS receiver - often inaccurate).
•
: House number on the left.
•
: House number on the right.
: Latitude and Longitude (coordinate of the current position in WGS84 format).
•
In the middle of the screen you can see whether the position is current, or the time left since it was
last updated.
•
Address details (when available) of the current position are displayed at the bottom.
You can also perform some actions on this screen:
Tap
to save the current position as a Favorite destination.
NX404 English 23
You can also search for assistance near your current position. Tap
screen for the Quick search:
to open a new
The following services can be searched around the current position or the last known position:
•
: Car repair and roadside assistance services
•
: Police stations
•
: Medical and emergency services
•
: Gas stations
Tap any of the buttons, select a Place from the list, and navigate to it.
24 NX404 English
3 On-road navigation
When first started, Clarion Mobile Map calculates routes using the road network of the high quality vector
maps provided with the product.
You can set up your route in different ways:
•
If you need a route for immediate navigation, you can select the destination and start navigating to
it right away (normal navigation).
•
You can also plan a route independently of your current GPS position or even without GPS
reception. To achieve this you need to set a new starting point in My Route / Edit Route by tapping
the flag icon at the current position. This will also turn off the GPS receiver so that the route is not
recalculated when a new position is received.
You can plan routes with multiple destinations. Select the first destination. Then select a second
destination and add it to your route to create a multi-point route. You can add as many destinations to
your route as you like.
You can also use Clarion Mobile Map for off-road navigation. For details, see page 82.
3.1 Selecting the destination of a route
Clarion Mobile Map offers you several ways of choosing your destination:
•
Enter a full address or a part of an address, for example a street name without a house number or
the names of two intersecting streets (page 34).
•
Enter an address with ZIP code (page Error! Bookmark not defined.). This way you do not need
to select the name of the city/town and the search for street names might be faster as well.
•
Use a built-in Place of Interest as your destination (page 49).
•
Select a location on the map with the Find on Map feature (page 62).
•
Use a previously saved Favorite destination (page 62).
•
Select a location from the History of previously used destinations (page 65).
•
Enter the coordinate of the destination (page 66).
3.1.1 Combined Search
There are several ways to select the destination of the route. You can find buttons in the Destination
menu that initiate a separate search for addresses, Places, Favorite or recent destinations. The fastest
way to search for any of these is to use the Combined Search. In this section you can find the full
description of how this feature works. The below process shows how to carry out the search and the
following subsections will help you find specific kinds of results.
1.
In the Navigation menu, tap
2.
Tap
.
and the Combined Search screen appears.
NX404 English 25
3.
First you see hints on the screen showing how you can use the function. These hints are only
displayed the first time you use this screen.
4.
Tap anywhere and the hints disappear. Once you get through this screen to the search results, the
hint will not appear again when you open this window later but you can see them again if you tap
the information button on the right side of the input field.
5.
You can see the input field at the top of the screen. Right below that you see the search area, the
city/town around which the search is carried out. The default search area is the area where you are
located. For a local search, skip the next step.
6.
(optional) To search in a different area, do as follows:
1.
. A new screen opens with a new input field. A hint bubble explains
Tap
how you can specify the new search center.
2.
Tap anywhere and the hint disappears. If you successfully select a new search area, the
hint will not appear again when you open this window later but you can see it again if you
tap the information button on the right side of the input field.
3.
Start entering the center of the new search area using the screen keyboard. You only need
to enter a few letters to get a result. If the new search area is in a different country or state,
you can narrow the search results if you enter one space and then a few letters of the
country or state of the search area.
4.
The most likely result appears below the input field as you enter new letters. Tap to select
this as your new search area. If you cannot see your preferred area after a few letters, tap
and select one from the list.
26 NX404 English
7.
With the proper search area displayed, you can start entering the name, address or category of the
button shows how
destination you are looking for. The number shown in the
many results match the entered text. The background search is carried out while you enter letters
so this number may keep on increasing if you wait a few seconds. Keep on entering new letters
while this number is high.
8.
Once the number of results is acceptable after a few seconds of searching, you can tap
to switch to the result screen.
9.
The result screen also opens with hints. Tap anywhere to suppress them. Once you select a
destination, they will not appear again.
10.
You see all results in the list, regardless of their type. Addresses, Places, Place categories,
Favorite and recent destinations are mixed within one list.
11.
You have the following options:
12.
•
Tap the result you want to use as your destination. Scroll the list if necessary.
•
To narrow the search for only one type of result (for example for Places only) you can tap
the related button at the top of the screen. See the next sections for details.
Once the destination is selected, a full screen map appears with the selected point in the middle. If
necessary, tap the map somewhere else to modify the destination. The Cursor (
the new location. Tap
select a different destination.
to confirm the destination, or tap
) appears at
to
NX404 English 27
13.
After a short summary of the route parameters, the map appears showing the entire route. The
to modify route parameters, or tap
route is automatically calculated. Tap
and start your journey.
If you know that you will use this destination frequently, before tapping
Tip! confirm the destination, put it on the list of your Favorites first: tap
to
then
, give a name for the new Favorite, and tap
to save the
location. The map with the destination returns automatically. Now you can start your journey.
3.1.1.1 Combined Search - Navigating to a recent destination (History)
To find one of your recent destinations in Combined Search, carry out the search as described earlier.
For the input text you can use either a part of the name or a part of the address of the recent destination.
When you get to the result screen, do as follows:
at the top of the screen.
1.
Tap
2.
The list is now filtered. What you see is the list of recent destinations with a matching name or
address.
3.
Scroll down the list if necessary and then select one of the destinations from the list.
4.
Once the destination is selected, a full screen map appears with the selected point in the middle. If
necessary, tap the map somewhere else to modify the destination. The Cursor (
the new location. Tap
select a different destination.
28 NX404 English
to confirm the destination, or tap
) appears at
to
5.
After a short summary of the route parameters, the map appears showing the entire route. The
to modify route parameters, or tap
route is automatically calculated. Tap
and start your journey.
Note! The alternative way to search for a recent destination is to tap the
button in the Quick
menu or in the Destination menu. The rest of the procedure is similar to the above.
3.1.1.2 Combined Search - Navigating to a Favorite destination
To find one of your Favorite destinations in Combined Search, carry out the search as described earlier.
When you get to the result screen, do as follows:
at the top of the screen.
1.
Tap
2.
The list is now filtered. What you see is the list of your Favorite destinations with a matching name.
3.
Scroll down the list if necessary and then select one of the destinations from the list.
4.
Once the destination is selected, a full screen map appears with the selected point in the middle. If
necessary, tap the map somewhere else to modify the destination. The Cursor (
the new location. Tap
select a different destination.
to confirm the destination, or tap
) appears at
to
NX404 English 29
5.
After a short summary of the route parameters, the map appears showing the entire route. The
to modify route parameters, or tap
route is automatically calculated. Tap
and start your journey.
Note! The alternative way to search for a Favorite destination is to tap the
button in the Quick
menu or in the Destination menu. The rest of the procedure is similar to the above.
3.1.1.3 Combined Search - Navigating to an address
To find an address in Combined Search, carry out the search as described earlier. Use the name of the
street alone or combined with the house number as your input text. When you get to the result screen, do
as follows:
at the top of the screen.
1.
Tap
2.
The list is now filtered. What you see is the list of matching addresses.
3.
Scroll down the list if necessary and then select one of the addresses from the list.
4.
Once the destination is selected, a full screen map appears with the selected point in the middle. If
necessary, tap the map somewhere else to modify the destination. The Cursor (
the new location. Tap
select a different destination.
30 NX404 English
to confirm the destination, or tap
) appears at
to
5.
After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap
to modify route parameters, or tap
and start your journey.
button in the Destination menu.
Note! The alternative way to search for an address is to tap the
Unlike the Combined Search, this alternative search method is a structured one where you can
define the parts of the address separately.
3.1.1.4 Combined Search - Navigating to an intersection
To find an intersection in Combined Search, carry out the search as described earlier but use the '&' sign
to separate the two intersecting streets. You do not need to use spaces before and after the separator
character. For example you can use any of the following input texts to find the intersections of Collins
Street and Douglas Avenue (the more precise the input string the fewer false results are expected):
•
Collins St & Douglas Ave
•
Collins & Douglas
•
Coll St & Dou Av
•
Col&Doug
•
C&D
•
Collins St& (this one will give you all the intersections of Collins Street so that you can select the
appropriate one from the result list)
When you get to the result screen, do as follows:
1.
Tap
2.
The list is now filtered. What you see is the list of matching intersections.
3.
Scroll down the list if necessary and then select one intersection from the list.
4.
Once the destination is selected, a full screen map appears with the selected point in the middle. If
at the top of the screen.
necessary, tap the map somewhere else to modify the destination. The Cursor (
) appears at
NX404 English 31
the new location. Tap
select a different destination.
5.
to confirm the destination, or tap
to
After a short summary of the route parameters, the map appears showing the entire route. The
to modify route parameters, or tap
route is automatically calculated. Tap
and start your journey.
Note!
The alternative way to search for an address is to tap the
button in the Destination
menu. Unlike the Combined Search, this alternative search method is a structured one where
you can define the parts of the address separately.
3.1.1.5 Combined Search - Navigating to a Place of Interest
To find a Place of Interest in Combined Search, carry out the search as described earlier. Search for a
part of its name. When you get to the result screen, do as follows:
at the top of the screen.
1.
Tap
2.
The list is now filtered. What you see is the list of matching Places ordered by their distance from
your current location.
3.
Scroll down the list if necessary and then select one of the Places from the list.
4.
Once the destination is selected, a full screen map appears with the selected point in the middle. If
necessary, tap the map somewhere else to modify the destination. The Cursor (
the new location. Tap
select a different destination.
32 NX404 English
to confirm the destination, or tap
) appears at
to
5.
After a short summary of the route parameters, the map appears showing the entire route. The
to modify route parameters, or tap
route is automatically calculated. Tap
and start your journey.
The alternative way to search for a Place is to tap the
Note!
button in the Quick menu or the
button in the Destination menu. These alternatives are different from the Combined
Search. The first one is also a name search but if there is a route planned, it will not be carried
out around your current location but along the route. The Place search in the Destination menu
is a complex Place search with several options including category search or search around the
destination of the current route.
3.1.1.6 Combined Search - Navigating to a Place of Interest by its category
To find a Place of Interest in Combined Search by giving its category only, carry out the search as
described earlier. Search for a part of the category name. When you get to the result screen, do as
follows:
1.
The list is ordered with Place categories at the beginning but if you want, you can filter the list to
contain Place categories only. Tap
at the top of the screen to filter the list.
2.
Scroll the list and select one of the categories. You get the list of Places in that category ordered
by their distance from your current position. If the selected category contains subcategories, you
will see all Places in that category mixed into one list.
3.
Scroll down the list if necessary and then select one of the Places from the list.
4.
Once the destination is selected, a full screen map appears with the selected point in the middle. If
necessary, tap the map somewhere else to modify the destination. The Cursor (
the new location. Tap
select a different destination.
to confirm the destination, or tap
) appears at
to
NX404 English 33
5.
After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap
to modify route parameters, or tap
and start your journey.
The alternative way to search for a Place category is to tap the
button in the Destination
Note!
menu and then tap
. This alternative is different from the Combined Search. When you
search for a Place category here, you will go through the whole Place category tree. When you
select a category, the list of its subcategories opens.
3.1.2 Entering an address or a part of the address
If you know at least a part of the address, it is the quickest way to select the destination of the route.
Using the same screen, you can find an address by entering:
•
the exact address, including house number
•
the center of a city/town
•
an intersection
•
the midpoint of a street
•
any of the above, starting the search with the ZIP code (page Error! Bookmark not defined.)
34 NX404 English
3.1.2.1 Entering an address (United States)
To enter an address as the destination, do as follows:
1.
If you are on the Map screen, tap
2.
In the Navigation menu, tap the following buttons:
3.
By default, Clarion Mobile Map proposes the country and state where you are. If needed, tap
to return to the Navigation menu.
,
.
, enter the first few letters of the destination country or state on the keyboard,
and select one from the list. If you select a country without a state, you can search for a city/town in
all its states.
4.
Select a new city/town:
a.
Tap
. The city/town of your current location is offered by default. For a
local search, tap
city/town name.
to accept it, otherwise continue with entering the destination
b.
Start entering the name of the city/town on the keyboard.
c.
Find the city/town you need:
•
The most likely city/town name is always shown in the input field. To accept it, tap
.
•
If the desired name does not show up, the names that match the string appear in a
list after entering a couple of characters (to open the list of results before it appears
automatically, tap
). Select the city/town from the list.
NX404 English 35
5.
Enter the street name:
.
a.
Tap
b.
Start entering the street name on the keyboard.
c.
Find the street you need:
•
The most likely street name is always shown in the input field. To accept it, tap
.
•
If the desired name does not show up, the names that match the string appear in a
list after entering a couple of characters (to open the list of results before it appears
). Select the street from the list.
automatically, tap
6.
7.
Enter the house number:
a.
Tap
b.
Enter the house number on the keyboard. (To enter letters, tap
c.
to finish entering the address. (If the entered house number
Tap
cannot be found, the midpoint of the street is selected as the destination.)
.
).
A full screen map appears with the selected point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
to confirm the destination, or tap
destination.
36 NX404 English
) appears at the new location. Tap
to select a different
8.
After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap
to modify route parameters, or tap
and start your journey.
3.1.2.2 Entering an address (Canada)
To enter an address as the destination, do as follows:
1.
If you are on the Map screen, tap
2.
In the Navigation menu, tap the following buttons:
3.
By default, Clarion Mobile Map proposes the country, state and city/town where you are. If needed,
to return to the Navigation menu.
,
.
, enter the first few letters of the destination country or state on the
tap
keyboard, and select one from the list. If you select a country without a state, you can search for a
city/town in all its states.
4.
If needed, select a new city/town:
a.
Tap
b.
Start entering the name of the city/town on the keyboard.
c.
Find the city/town you need:
•
.
The most likely city/town name is always shown in the input field. To accept it, tap
.
NX404 English 37
•
If the desired name does not show up, the names that match the string appear in a
list after entering a couple of characters (to open the list of results before it appears
). Select the city/town from the list.
automatically, tap
5.
Enter the street name:
a.
Tap
b.
Start entering the street name on the keyboard.
c.
Find the street you need:
.
•
The most likely street name is always shown in the input field. To accept it, tap
.
•
If the desired name does not show up, the names that match the string appear in a
list after entering a couple of characters (to open the list of results before it appears
). Select the street from the list.
automatically, tap
6.
Enter the house number:
a.
Tap
b.
Enter the house number on the keyboard. (To enter letters, tap
38 NX404 English
.
).
c.
7.
to finish entering the address. (If the entered house number
Tap
cannot be found, the midpoint of the street is selected as the destination.)
A full screen map appears with the selected point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
) appears at the new location. Tap
to confirm the destination, or tap
to select a different
destination.
8.
After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap
to modify route parameters, or tap
and start your journey.
3.1.2.3 Entering an address starting with the street name (in the United States only)
You can leave the city/town name empty and start the search with the street name. This way you can
search in all streets of a state. Do as follows:
1.
If you are on the Map screen, tap
2.
In the Navigation menu, tap the following buttons:
to return to the Navigation menu.
,
.
NX404 English 39
3.
By default, Clarion Mobile Map proposes the country and state where you are. If needed, tap the
button with the name of the country, enter the first few letters of the destination country or state on
the keyboard, and select a country and state from the list. If you select the country without a state,
this function cannot work.
4.
Enter the street name:
a.
Tap
b.
Start entering the street name on the keyboard.
c.
Find the street you need:
.
•
The most likely street name is always shown in the input field. To accept it, tap
.
•
If the desired name does not show up, the names that match the string appear in a
list after entering a couple of characters (to open the list of results before it appears
automatically, tap
40 NX404 English
). Select the street from the list.
5.
6.
Enter the house number:
a.
Tap
b.
Enter the house number on the keyboard. (To enter letters, tap
c.
to finish entering the address. (If the entered house number
Tap
cannot be found, the midpoint of the street is selected as the destination.)
.
).
A full screen map appears with the selected point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
to confirm the destination, or tap
) appears at the new location. Tap
to select a different
destination.
7.
After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap
to modify route parameters, or tap
and start your journey.
NX404 English 41
3.1.2.5 Entering the midpoint of a street as the destination
You can navigate to the midpoint of a street if the house number is not available:
1.
If you are on the Map screen, tap
2.
In the Navigation menu, tap the following buttons:
3.
Select the country, state and city/town as described earlier (page 35).
4.
Enter the street name:
,
.
.
a.
Tap
b.
Start entering the street name on the keyboard.
c.
Find the street you need:
•
The most likely street name is always shown in the input field. To accept it, tap
.
•
If the desired name does not show up, the names that match the string appear in a
list after entering a couple of characters (to open the list of results before it appears
automatically, tap
5.
to return to the Navigation menu.
Instead of entering the house number, tap
selected as the destination.
42 NX404 English
). Select the street from the list.
. The midpoint of the street is
6.
A full screen map appears with the selected point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
) appears at the new location. Tap
to confirm the destination, or tap
to select a different
destination.
7.
After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap
to modify route parameters, or tap
and start your journey.
3.1.2.6 Selecting an intersection as the destination
To enter an address as the destination, do as follows:
1.
If you are on the Map screen, tap
2.
In the Navigation menu, tap the following buttons:
3.
Select the country, state and city/town as described earlier (page 35).
4.
Enter the street name:
a.
Tap
b.
Start entering the street name on the keyboard.
c.
Find the street you need:
•
to return to the Navigation menu.
,
.
.
The most likely street name is always shown in the input field. To accept it, tap
.
NX404 English 43
•
If the desired name does not show up, the names that match the string appear in a
list after entering a couple of characters (to open the list of results before it appears
). Select the street from the list.
automatically, tap
5.
Enter the intersecting street name:
1.
6.
Tap
.
•
If only a few intersecting streets exist, their list appears immediately.
•
In case of a longer street, the keyboard screen appears. Start entering the name of the
intersecting street on the keyboard. As soon as the street names that match the entered
string can be shown on one screen, their list appears automatically. Select from the list.
A full screen map appears with the selected point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
to confirm the destination, or tap
) appears at the new location. Tap
to select a different
destination.
7.
After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap
and start your journey.
44 NX404 English
to modify route parameters, or tap
3.1.2.7 Selecting a city/town center as the destination
The city/town center is not the geometric center of the city/town but an arbitrary point the map creators
have chosen. In towns and villages, it is usually the most important intersection; in larger cities, it is one of
the important intersections.
to return to the Navigation menu.
1.
If you are on the Map screen, tap
2.
In the Navigation menu, tap the following buttons:
3.
Select the country and state as described earlier (page 35).
4.
Select the destination city/town:
,
a.
Tap
b.
Start entering the name of the city/town on the keyboard.
c.
Find the city/town you need:
•
.
.
The most likely city/town name is always shown in the input field. To accept it, tap
.
•
If the desired name does not show up, the names that match the string appear in a
list after entering a couple of characters (to open the list of results before it appears
automatically, tap
5.
Instead of entering the street name, tap
city/town becomes the destination of the route.
). Select the city/town from the list.
. This way the center of the displayed
NX404 English 45
6.
A full screen map appears with the selected point in the middle. If necessary, tap the map
) appears at the new location. Tap
somewhere else to modify the destination. The Cursor (
to confirm the destination, or tap
to select a different
destination.
7.
After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap
to modify route parameters, or tap
and start your journey.
3.1.2.8 Entering an address with a ZIP code
All of the above address searching possibilities can be performed with entering the ZIP code instead of
the city/town name. Find below an example with a full address:
to return to the Navigation menu.
1.
If you are on the Map screen, tap
2.
In the Navigation menu, tap the following buttons:
3.
Select the country and state as described earlier (page 35).
4.
Enter a new city/town using its ZIP code:
a.
Tap
.
b.
Tap
to open the numeric keypad.
c.
Start entering the ZIP code.
d.
Find the city/town you need:
•
46 NX404 English
,
.
The most likely ZIP code is always shown in the input field. To accept it, tap
.
•
If the desired number does not show up, open the list of results by tapping
. Select the ZIP code from the list.
5.
Enter the street name:
a.
Tap
b.
Start entering the street name on the keyboard.
c.
Find the street you need:
.
•
The most likely street name is always shown in the input field. To accept it, tap
.
•
If the desired name does not show up, the names that match the string appear in a
list after entering a couple of characters (to open the list of results before it appears
). Select the street from the list.
automatically, tap
6.
Enter the house number:
a.
Tap
b.
Enter the house number on the keyboard. (To enter letters, tap
.
).
NX404 English 47
c.
7.
to finish entering the address. (If the entered house number
Tap
cannot be found, the midpoint of the street is selected as the destination.)
A full screen map appears with the selected point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
to confirm the destination, or tap
) appears at the new location. Tap
to select a different
destination.
8.
After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap
to modify route parameters, or tap
and start your journey.
3.1.2.9 Tips on entering addresses quickly
•
When you are entering the name of a city/town or a street:
•
Only those letters are offered on the keyboard that appear in possible search results. All
other characters are grayed out.
•
As you are typing, the most likely result is always displayed in the input field. If the guess is
correct, tap
•
to select it.
After entering a couple of letters, tap
specified letters.
48 NX404 English
to list the items that contain the
•
You can speed up finding an intersection:
•
Search first for the street with a less common or less usual name; fewer letters are enough
to find it.
•
If one of the streets is shorter, search for that one first. You can then find the second one
faster.
•
You can search for both the type and the name of a road. If the same word appears in several
names, for example in the name of streets, roads and avenues, you can obtain the result faster if
you enter the first letter of the street type: For example, enter 'PI A' to obtain Pine Avenue and skip
all Pine Streets and Pickwick Roads.
•
You can also search in ZIP codes. As ZIP codes consist of only a few characters, this is usually
faster than entering the name of the city/town.
3.1.3 Selecting the destination from the Places of Interest
You can select your destination from the Places of Interest included with Clarion Mobile Map.
Using the same screen, you can find a Place in different ways:
•
with the Quick search feature, you can quickly find a nearby Place by its name
•
with the Preset search feature, you can find frequently searched types of Places with only a few
screen taps
•
you can search for a Place by its category
•
you can search for a Place by its name
In addition, you can search for special services from the 'Where Am I?' screen.
3.1.3.1 Quick search for a Place of Interest
The Quick search feature lets you quickly find a Place by its name. The search is always carried out
•
along the recommended route if it exists or
•
around your current location if there is no destination given.
1.
Start the Quick search function:
•
If you are on the Map screen, tap
•
If you are in the Navigation menu, tap
and then tap
.
,
and then tap
.
NX404 English 49
2.
Using the keyboard, start entering the name of the Place.
3.
After entering a few letters, tap
containing the entered character sequence.
4.
(optional) The Places in the list are ordered by the length of the necessary detour (when navigating
a route) or by their distance from the current position (when no destination is given). If you need to
to open the list of Places with names
.
reorder the list, tap
5.
Browse the list if necessary and tap one of the list items. A full screen map appears with the
selected point in the middle. The name and address of the Place is displayed at the top of the
screen.
6.
(optional) Tap
the map.
7.
If necessary, tap the map somewhere else to modify the destination. The Cursor (
to see the details of the selected Place. Tap
at the new location. Tap
to select a different destination.
50 NX404 English
to confirm the destination, or tap
to return to
) appears
8.
After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap
to modify route parameters, or tap
and start your journey.
3.1.3.2 Searching for a Place of Interest using preset categories
The Preset search feature lets you quickly find the most frequently selected types of Places.
1.
If you are on the Map screen, tap
2.
In the Navigation menu, tap the following buttons:
3.
The preset search categories appear:
•
to return to the Navigation menu.
,
.
:
•
If an active route exists, gas stations are searched along the route.
•
If there is no active route (destination is not selected), they are searched around the
current position.
•
If the current position is not available either (no GPS signal), they are searched
around the last known position.
•
:
•
If an active route exists, parking lots are searched around the destination of the
route.
NX404 English 51
•
If there is no active route (destination is not selected), they are searched around the
current position.
•
If the current position is not available either (no GPS signal), they are searched
around the last known position.
•
:
•
If an active route exists, restaurants are searched along the route.
•
If there is no active route (destination is not selected), they are searched around the
current position.
•
If the current position is not available either (no GPS signal), they are searched
around the last known position.
•
:
•
If an active route exists, accommodation is searched around the destination of the
route.
•
If there is no active route (destination is not selected), they are searched around the
current position.
•
If the current position is not available either (no GPS signal), they are searched
around the last known position.
4.
Tap any of the quick search buttons to get an instant list of Places.
5.
(optional) The Places in the list are ordered by their distance from the current or last known
position, from the destination or by the length of the necessary detour. If you need to reorder the
list, tap
.
6.
Browse the list if necessary and tap one of the list items. A full screen map appears with the
selected point in the middle. The name and address of the Place is displayed at the top of the
screen.
7.
(optional) Tap
the map.
8.
If necessary, tap the map somewhere else to modify the destination. The Cursor (
to see the details of the selected Place. Tap
at the new location. Tap
to select a different destination.
52 NX404 English
to confirm the destination, or tap
to return to
) appears
9.
After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap
to modify route parameters, or tap
and start your journey.
3.1.3.3 Searching for a Place of Interest by category
You can search for Places of Interest by their categories and subcategories.
1.
If you are on the Map screen, tap
2.
In the Navigation menu, tap the following buttons:
3.
Tap
4.
Select the area around which the Place should be searched for:
to return to the Navigation menu.
,
.
.
•
Tap
to search around the current position or if it is not available,
around the last know position. (The result list will be ordered by the distance from this
position.)
•
to search for a place within a selected city/town. (The result list will
Tap
be ordered by the distance from the center of the selected city/town.)
•
to search for a place around the destination of the active route.
Tap
(The result list will be ordered by the distance from the destination.)
NX404 English 53
•
to search along the active route, and not around a given point.
Tap
This is useful when you search for a later stopover that results in a minimal detour only,
such as searching for upcoming gas stations or restaurants. (The result list will be ordered
by the length of the necessary detour.)
5.
(optional) If you have selected
6.
Select one of the main Place categories (e.g. Accommodation) or tap
Places around the selected location or along the route.
7.
to list all
Select one of the Place subcategories (e.g. Hotel or Motel) or tap
Places in the selected main category around the selected location or along the route.
54 NX404 English
, select the city/town to search in.
to list all
8.
Sometimes the list of brands in the selected Place subcategory appears. Select one brand or tap
to list all Places in the selected subcategory around the selected location or
along the route.
9.
10.
Finally, the results appear in a list.
(optional) The Places in the list are ordered by their distance from the current or last known
position, from the selected city/town, from the destination or by the length of the necessary detour.
If you need to reorder the list, tap
.
11.
Browse the list if necessary and tap one of the list items. A full screen map appears with the
selected point in the middle. The name and address of the Place is displayed at the top of the
screen.
12.
(optional) Tap
the map.
13.
If necessary, tap the map somewhere else to modify the destination. The Cursor (
to see the details of the selected Place. Tap
at the new location. Tap
to select a different destination.
to return to
) appears
to confirm the destination, or tap
NX404 English 55
14.
After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap
to modify route parameters, or tap
and start your journey.
3.1.3.4 Searching for a Place of Interest by name
You can search for Places of Interest by their names. You can search around different locations or along
your route in the whole Place database or in one Place category or subcategory only.
to return to the Navigation menu.
1.
If you are on the Map screen, tap
2.
In the Navigation menu, tap the following buttons:
3.
Tap
4.
Select the area around which the Place should be searched for:
,
.
.
•
to search around the current position or if it is not available,
Tap
around the last know position. (The result list will be ordered by the distance from this
position.)
•
to search for a place within a selected city/town. (The result list will
Tap
be ordered by the distance from the center of the selected city/town.)
•
to search for a place around the destination of the active route.
Tap
(The result list will be ordered by the distance from the destination.)
56 NX404 English
•
to search along the active route, and not around a given point.
Tap
This is useful when you search for a later stopover that results in a minimal detour only,
such as searching for upcoming gas stations or restaurants. (The result list will be ordered
by the length of the necessary detour.)
5.
(optional) If you have selected
6.
Select one of the main Place categories (e.g. Accommodation) to search in or tap
, select the city/town to search in.
to search among all Places.
7.
Select one of the Place subcategories (e.g. Hotel or Motel) to search in or tap
to search in the selected Place category.
NX404 English 57
if you have not done it before.
8.
Tap
9.
Using the keyboard, start entering the name of the Place.
to open the list of Places with names
10.
After entering a few letters, tap
containing the entered character sequence.
11.
(optional) The Places in the list are ordered by their distance from the current or last known
position, from the selected city/town, from the destination or by the length of the necessary detour.
If you need to reorder the list, tap
.
12.
Browse the list if necessary and tap one of the list items. A full screen map appears with the
selected point in the middle. The name and address of the Place is displayed at the top of the
screen.
13.
(optional) Tap
the map.
14.
If necessary, tap the map somewhere else to modify the destination. The Cursor (
to see the details of the selected Place. Tap
at the new location. Tap
to select a different destination.
58 NX404 English
to confirm the destination, or tap
to return to
) appears
15.
After a short summary of the route parameters, the map appears showing the entire route. The
to modify route parameters, or tap
route is automatically calculated. Tap
and start your journey.
3.1.3.5 Searching for a Place of Interest by its phone number
You can search for Places of Interest by their phone number:
1.
If you are on the Map screen, tap
2.
In the Navigation menu, tap the following buttons:
3.
The numeric keyboard appears. Enter the phone number you are looking for or a part of it.
4.
Tap
5.
The list of Places with the entered sequence in their phone number appears.
6.
(optional) The Places in the list are ordered by their distance from the current or last known
position, from the selected city/town, from the destination or by the length of the necessary detour.
to return to the Navigation menu.
,
.
.
If you need to reorder the list, tap
.
7.
Browse the list if necessary and tap one of the list items. A full screen map appears with the
selected point in the middle. The name and address of the Place is displayed at the top of the
screen.
8.
(optional) Tap
the map.
to see the details of the selected Place. Tap
to return to
NX404 English 59
9.
If necessary, tap the map somewhere else to modify the destination. The Cursor (
to confirm the destination, or tap
at the new location. Tap
to select a different destination.
10.
) appears
After a short summary of the route parameters, the map appears showing the entire route. The
to modify route parameters, or tap
route is automatically calculated. Tap
and start your journey.
3.1.3.6 Selecting nearby assistance from 'Where Am I?'
You can quickly search for nearby assistance from the 'Where Am I?' screen.
1.
On the Map screen, tap
2.
Tap
3.
Preset search categories appear, all for searching around the current position (or around the last
known position if the current position is not available):
•
60 NX404 English
, and then
to open the Quick menu.
.
: Car repair and roadside assistance services
•
: Medical and emergency services
•
: Police stations
•
: Gas stations
4.
Tap any of the quick search buttons to get an instant list of that type of Places.
5.
(optional) The Places in the list are ordered by their distance from the current or last known
position, from the selected city/town, from the destination or by the length of the necessary detour.
If you need to reorder the list, tap
.
6.
Browse the list if necessary and tap one of the list items. A full screen map appears with the
selected point in the middle. The name and address of the Place is displayed at the top of the
screen.
7.
(optional) Tap
the map.
8.
If necessary, tap the map somewhere else to modify the destination. The Cursor (
to see the details of the selected Place. Tap
at the new location. Tap
to select a different destination.
9.
to return to
) appears
to confirm the destination, or tap
After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap
to modify route parameters, or tap
and start your journey.
NX404 English 61
3.1.4 Selecting a map location as the destination
1.
If you are on the Map screen, tap
to return to the Navigation menu.
2.
In the Navigation menu, tap the following buttons:
3.
Locate your destination on the map: move and scale the map as needed.
4.
Tap the location that you want to select as your destination. The Cursor (
5.
Tap
6.
After a short summary of the route parameters, the map appears showing the entire route. The
,
.
) appears there.
to select the Cursor as the destination.
to modify route parameters, or tap
route is automatically calculated. Tap
and start your journey.
3.1.5 Selecting the destination from your Favorites
You can select a location that you have already saved as a Favorite to be your destination. Adding a
location to the list of Favorite destinations is described on page 77.
1.
Access the list of Favorites:
•
If you are on the Map screen, tap
•
If you are in the Navigation menu, tap
62 NX404 English
to open the Quick menu.
.
2.
Tap
. The list of Favorite destinations is displayed.
3.
Tap the Favorite that you want to set as your destination. If necessary, browse down to see more
of the list or tap
destination.
4.
and enter a few letters from the name of the Favorite
A full screen map appears with the selected point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
to confirm the destination, or tap
) appears at the new location. Tap
to select a different
destination.
5.
After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap
to modify route parameters, or tap
and start your journey.
NX404 English 63
3.1.6 Selecting your Home location
To navigate to your Home location, first you need to save it. Seach for your address or browse the map
and select
and when the Cursor is at the desired location, tap
.
Now that the Home location is set, you can quickly navigate to it:
1.
2.
To select the Home location, do one of the following:
•
If you are on the Map screen, tap
and then tap
the Quick menu in Settings - page 93).
•
If you are in the Navigation menu, tap
(this button can be added to
and then tap
.
A full screen map appears with the selected point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
to confirm the destination, or tap
) appears at the new location. Tap
to select a different
destination.
3.
After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap
and start your journey.
64 NX404 English
to modify route parameters, or tap
3.1.7 Selecting a recent destination from the History
The destinations that you have set earlier appear in the History.
1.
Access the History:
•
If you are on the Map screen, tap
•
If you are in the Navigation menu, tap
and then tap
.
and then tap
.
2.
The list of recent destinations appears. Smart History promotes three destinations to the first page
based on your previous routes (most likely destinations). The rest of the destinations are ordered
by time they were last selected. If necessary, scroll the list to see earlier destinations.
3.
Select a destination from the list.
4.
A full screen map appears with the selected point in the middle. If necessary, tap the map
somewhere else to modify the destination. The Cursor (
to confirm the destination, or tap
) appears at the new location. Tap
to select a different
destination.
5.
After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap
to modify route parameters, or tap
and start your journey.
NX404 English 65
3.1.8 Entering the coordinate of the destination
You can also select a destination by entering its coordinate. Do as follows:
1.
If you are on the Map screen, tap
2.
In the Navigation menu, tap
3.
Open the
4.
You can enter the latitude and longitude values in any of the following formats: decimal degrees;
degrees and decimal minutes; or degrees, minutes and decimal seconds.
5.
(optional) If necessary, tap
in UTM format.
6.
When finished, tap
7.
A full screen map appears with the selected point in the middle. If necessary, tap the map
to return to the Navigation menu.
.
menu and tap
.
then
.
somewhere else to modify the destination. The Cursor (
to confirm the destination, or tap
destination.
66 NX404 English
and enter the coordinate
) appears at the new location. Tap
to select a different
8.
After a short summary of the route parameters, the map appears showing the entire route. The
to modify route parameters, or tap
route is automatically calculated. Tap
and start your journey.
3.1.9 Building a route from the list of destinations (Create Route)
You can also build your route destination by destination from the My Route menu.
1.
If you are on the Map screen, tap
2.
In the Navigation menu, tap
3.
Tap
4.
There is only one line in the list of route points, the start point of the route, normally the current
GPS position.
5.
Tap
to return to the Navigation menu.
.
.
to select the destination.
NX404 English 67
6.
The Destination menu appears and you can select the destination of the route the same way as
described in the previous sections.
7.
When the new destination is selected, the list returns.
8.
To add more destinations, tap
repeat the above procedure.
where you want to insert the new route point in the list, and
3.2 Viewing the entire route on the map
It is easy to get a map overview of the active route. Do as follows:
1.
If you are on the Map screen, tap
2.
In the Navigation menu, tap
3.
. The active route is displayed in its full length on the map together with
Tap
additional information and controls.
68 NX404 English
to return to the Navigation menu.
.
3.3 Checking route parameters and accessing route related functions
You can check different parameters of the route recommended by Clarion Mobile Map.
1.
If you are on the Map screen, tap
2.
In the Navigation menu, tap
3.
The following pieces of information are displayed:
4.
to return to the Navigation menu.
.
•
The name and/or address of the destination.
•
Warning icons (if any). They provide extra information about your route (e.g. unpaved roads
or toll roads to be taken).
•
The total time of the route.
•
The total length of the route.
•
Estimated delay calculated from traffic events on your route.
•
The symbol of the vehicle type used in route calculation.
•
The route planning method (e.g. Fast).
You have the following options on this screen (for detailed instructions on how to use them, see
the next chapter):
•
to edit the route: to add or remove destinations or change their
Tap
sequence. You can also set a route start point other than your current location. This can be
useful to plan and save a future trip.
•
Tap
to display the entire route on the map.
•
Tap
to bypass a part of the route.
•
Tap
to delete the active route.
•
to open a list with more options like selecting from route
Tap
alternatives, changing route parameters, simulating the route, saving the active route or
loading a previously saved route.
•
Tap
to return to the Navigation menu.
NX404 English 69
3.4 Modifying the route
When navigation is already started, there are several ways to modify the active route. The following
sections show some of those options.
3.4.1 Selecting a new destination when already having a route: New Route, Waypoint or
Final Destination
If you already have a recommended route and you select a new destination as described in the above
sections, the application will ask you whether to start a new route, add a new waypoint (intermediate
destination) to the route or append the newly selected destination at the end of the current route.
•
to plan a new route to the newly selected location. The previous destination and
Tap
waypoint(s) are deleted.
•
to add the newly selected location as an intermediate destination to your route. The
Tap
other destinations of the route remain intact. Note: the new waypoint is placed among destinations
to keep the route optimal. To decide where a waypoint to appear, use the Edit Route feature.
•
to append the newly selected destination at the end of the route. The other
Tap
destinations of the route remain intact. The previous final destination is now the last waypoint.
3.4.2 Setting a new starting position for the route
For normal navigation, all routes are planned from the current position. In order to check future routes,
simulate them or see their length in time and distance, you can turn off the GPS receiver. Then you can
set the starting point of the route to a different location than the current GPS position.
1.
If you are on the Map screen, tap
2.
In the Navigation menu, tap
70 NX404 English
to return to the Navigation menu.
.
3.
If you already have a route, tap
. If you are starting a new route, tap
.
4.
The first line is the start of the route, normally the current GPS position. Tap
your action at the warning message.
5.
The Destination menu appears and you can select the start point of the route the same way you
select a destination.
6.
When the new start point is set, tap
and confirm
.
NX404 English 71
7.
The map returns with a transparent Vehimarker (showing that there is no GPS reception). If an
active route already existed, it is now recalculated starting from the selected location.
8.
To return to normal navigation, tap
.
3.4.3 Editing the list of destinations (Edit Route)
You can edit the route by modifying the list of destinations. You can add or remove destinations, modify
the start position or reorder the list.
1.
If you are on the Map screen, tap
2.
In the Navigation menu, tap
3.
Tap
4.
You have the following options:
to return to the Navigation menu.
.
.
•
Tap
to add a new destination.
•
Tap
to delete a destination.
•
Tap
to modify the start point of the route.
•
to reorder the list. You can do it manually or you can let the
Tap
application optimize the route for you.
72 NX404 English
3.4.4 Pausing the active route
You do not need to pause the active route: when you start driving again, Clarion Mobile Map restarts the
voice instructions from your position.
3.4.5 Canceling the active route
To cancel the navigated route, do one of the following:
•
If you are on the Map screen, tap
you need to tap
•
and then tap
. (If you have a route with waypoints,
until all waypoints are deleted.)
In the Navigation menu, tap
route is deleted with all its waypoints.
and then tap
. The active
3.4.6 Checking route alternatives when planning the route
You can select from different route alternatives or change the route planning method after you have
selected a new destination. Do as follows:
1.
Select a destination as explained earlier, and get to the route confirmation screen.
2.
Tap
.
3.
Tap
.
NX404 English 73
4.
You see the basic details of three route alternatives with the selected route planning method. Tap
any of them to see it on the map.
5.
Or if you cannot find a good alternative, tap
different routing methods.
6.
Select one of the route alternatives and tap
to return to the previous screen.
Clarion Mobile Map recalculates the route. The orange line now shows the new recommended
route.
and scroll down for routes with
3.4.7 Checking route alternatives for an existing route
To recalculate the active route with a different route planning method, you can modify the Route settings
(page 93). There is another way to do this and to compare different route alternatives with the same route
planning method. Do as follows:
1.
If you are on the Map screen, tap
2.
In the Navigation menu, tap
74 NX404 English
to return to the Navigation menu.
.
3.
Tap
.
4.
Tap
.
5.
You see the basic details of three route alternatives with the selected route planning method. Tap
any of them to see it on the map.
6.
Or if you cannot find a good alternative, tap
different routing methods.
7.
Select one of the route alternatives then tap and hold
for a few seconds to
return to the Map screen. Clarion Mobile Map recalculates the route. The orange line now shows
the new recommended route.
and scroll down for routes with
NX404 English 75
3.4.8 Changing the road types used in route planning
To recalculate the active route with different road type preferences, do as follows. These changes can
also be made in Settings (page 93).
1.
On the Map screen, tap
2.
Tap any of the listed road types to modify the route. If needed, scroll the list for all road types. You
have the following options (their order depends on the selected vehicle type):
3.
and then tap
.
•
- You might need to avoid freeways when you are driving a slow car or
you are towing another vehicle.
•
- Charge roads are pay roads where you can purchase a pass or
vignette to use the road for a longer period of time. They can be enabled or disabled
separately from toll roads.
•
- Clarion Mobile Map includes toll roads (pay roads where there is a
per-use charge) in the routes by default. If you disable toll roads, Clarion Mobile Map plans
the best toll-free route.
•
- Clarion Mobile Map includes ferries in a planned route by default.
However, a map does not necessarily contain information about the accessibility of
temporary ferries. You might also need to pay a fare on ferries.
•
- Clarion Mobile Map excludes unpaved roads by default: unpaved
roads can be in a bad condition and usually you cannot reach the speed limit on them.
•
- Carpool or HOV lanes can be used if a given number of passengers
are traveling in the vehicle. You should check whether you are allowed to use carpool lanes
before enabling this road type.
The route has already been recalculated. Tap
The orange line now shows the new recommended route.
76 NX404 English
to return to the Map screen.
3.5 Saving a location as a Favorite destination
You can add any location to Favorites, the list of frequently used destinations. Planning a route to one of
the Favorite destinations is described on page 62.
1.
Select a destination as described before. It can be an address, a Place, any location on the map, a
previously used destination from History, etc.
2.
When the full screen map appears with the selected location in the middle, tap
.
3.
Tap
4.
(optional) Using the keyboard, you can change the name offered for the Favorite. Tap
enter numbers or symbols.
5.
Tap
.
to
to save the location as a new Favorite destination.
3.5.1 Editing the details of a Favorite destination
You can select a location that you have already saved as a Favorite and edit its details. Adding a location
to the list of Favorite destinations is described on page 77.
1.
Access the list of Favorites:
•
If you are on the Map screen, tap
•
If you are in the Navigation menu, tap
and then tap
.
and then tap
.
NX404 English 77
2.
The list of Favorite destinations is displayed.
3.
Tap the Favorite that you want to edit. If necessary, browse down to see more of the list or tap
and enter a few letters from the name of the Favorite destination.
4.
A full screen map appears with the selected point in the middle.
5.
Tap
6.
Tap any of the data fields and modify its content.
7.
Tap and hold
to see the details of the selected Place.
to return to the map.
3.6 Saving a map location as an alert point
You can save any map location as an alert point (for example a speed camera or a railroad crossing).
1.
Browse the map and select a location. The red Cursor appears there.
2.
Tap
3.
Scroll down the list and tap
78 NX404 English
.
.
4.
On the newly opened screen, select the type of the alert point, the direction from which you expect
the alert, and (if applicable) the speed limit for this alert point.
5.
Tap
to save the location as a new alert point.
3.7 Editing an alert point
You can edit a previously saved or uploaded alert point (for example a speed camera or a railroad
crossing).
1.
Browse the map and select the alert point to edit. The red circle appears around the alert point.
2.
Tap
3.
Scroll down the list and tap
4.
On the newly opened screen, modify the type of the alert point, the direction from which you expect
the alert, or (if applicable) the speed limit for this alert point.
5.
Tap
.
.
to save the changes to the alert point.
NX404 English 79
3.8 Watching the simulation of the route
You can run a simulated navigation that demonstrates the active route. Do as follows:
to return to the Navigation menu.
1.
If you are on the Map screen, tap
2.
In the Navigation menu, tap
3.
Tap
4.
Scroll down the list and tap
. The simulation starts from the starting point of the
route, and using a realistic speed, it leads you through the whole recommended route.
1.
.
.
(optional) You have the following controls during the simulation (the control buttons disappear
after a few seconds but you can open them again if you tap the map):
•
: Jump to the next route event (maneuver).
•
: Pause the simulation.
•
: Jump to the previous route event (maneuver).
80 NX404 English
•
2.
: Tap to increase the speed of the simulation to 4, 8 or 16 times faster. Now tap again
to return to the normal speed.
Tap
to stop the simulation.
NX404 English 81
4 Off-road navigation
When first started, Clarion Mobile Map calculates routes using the road network of the high quality vector
maps provided with the product. You can switch the application to off-road mode in Route settings in one
of the following ways:
•
,
From the Main menu, tap
,
and then
.
•
From the Map screen, tap
,
and then
.
Most of the procedures described for on-road navigation also apply to off-road navigation. However, there
are some that are not available in this navigation mode (for example you cannot open the itinerary as you
have no maneuvers just route points and straight lines between them).
4.1 Selecting the destination of the route
Selecting the start point or a destination (waypoint or final destination) is the same as described at onroad navigation. The only difference is that route points are linked to form a route with straight lines
regardless of the road network and traffic regulations.
4.2 Navigating in off-road mode
The real difference between the on-road and off-road modes is the navigation itself. When you are on the
Map screen with an off-road route:
•
your position and heading is not aligned with the nearest road and
•
there is no turn by turn navigation just a recommended direction.
You see a orange line drawn between your current position and the next destination to reach. The Turn
Preview field in the top left corner shows a compass with your bearing and the distance of the next
destination.
When you reach a waypoint, the orange line will show the direction to the next destination. (Future legs of
the route are shown with orange lines.)
When you reach the final destination, navigation ends.
82 NX404 English
5 Reference Guide
On the following pages you will find the description of the different concepts and menu screens of Clarion
Mobile Map.
5.1 Concepts
5.1.1 Smart Zoom
Smart Zoom provides much more than just a usual automatic zoom feature:
•
While following a route: when approaching a turn, it will zoom in and raise the view angle to let
you easily recognize your maneuver at the next junction. If the next turn is at a distance, it will
zoom out and lower the view angle to be flat so you can see the road in front of you.
•
While driving without an active route: Smart Zoom will zoom in if you drive slowly and zoom out
when you drive at high speed.
5.1.2 Daytime and night color themes
Clarion Mobile Map uses different color themes during the day and during the night for both the map and
the menu screens.
•
Daytime colors are similar to paper road maps, and the menus are bright.
•
The night color themes use dark colors for large objects to keep the average brightness of the
screen low.
Clarion Mobile Map offers different daytime and night color profiles. It can also switch automatically
between the daytime and the night schemes based on the current time and GPS position a few minutes
before sunrise, when the sky has already turned bright, and a few minutes after sunset, before it becomes
dark.
NX404 English 83
5.1.3 Tunnel view
When entering a tunnel, the map is replaced with a generic tunnel image so that surface roads and
buildings cannot distract you.
The top-down overview of the tunnel helps you orient yourself. The remaining distance in the tunnel is
also displayed.
After leaving the tunnel, the original map view returns.
This feature can be turned off in Settings (page 98).
5.1.4 Route calculation and recalculation
Clarion Mobile Map calculates the route based on your preferences:
•
Route planning methods:
•
: Gives a quick route if you can travel at or near the speed limit on all
roads. Usually the best selection for fast and normal cars.
•
: Gives a route that has the smallest total distance of all possible routes.
It can be practical for slow vehicles.
•
: Gives a quick but fuel efficient route based on the fuel consumption
data given in Route settings (page 93). Travel cost and CO2 emission calculations are
estimations only. They cannot take elevations, curves and traffic conditions into account.
•
: For vehicle types where Green routing is not available, this method
combines the benefits of Fast and Short: Clarion Mobile Map calculates as if it were
calculating the Fast route, but it takes other roads as well to save fuel.
•
: Results in a route with fewer turns and no difficult maneuvers. With
this option, you can make Clarion Mobile Map to take, for example, the freeway instead of a
series of smaller roads or streets.
84 NX404 English
•
Vehicle types:
When creating a new vehicle profile, select one of the below vehicle types. Besides the below
mentioned conditions, dimension, weight and freight hazard restrictions can also be taken into
account when planning a route.
•
Road types used or avoided in route calculation:
•
•
•
•
•
•
Clarion Mobile Map automatically recalculates the route if you deviate from the proposed itinerary.
For further information about Route settings, see page 93.
5.1.5 Green routing
Route calculation is not only about finding the quickest or shortest route. For some of the vehicle types,
you can also check the fuel consumption and CO2 emission when planning a route, and you can create
cost effective routes with less effect on the environment.
In Route settings, you can edit the parameters of the selected vehicle. Enter the fuel consumption values
and the price of the fuel. You can also select whether you want to see the difference between your route
and the green route even if the selected routing method is not Green.
as route planning method to get a fast but
After the above parameters are set, select
also fuel efficient route. Note that travel cost and CO2 emission calculations are estimations only. They
cannot take elevations, turns, curves and traffic conditions into account. Also, this routing is not meant to
give you the "greenest" route of all. It is still important to travel quickly so the result is a fast route with low
fuel consumption and CO2 emission.
NX404 English 85
With a vehicle type where green routing is selectable, whichever route planning method is selected, the
Green details are also shown when you confirm the route:
If the selected route planning method is not Green, and you have allowed the application to show the
green alternative, the price, fuel consumption and CO2 emission differences between your selected route
and the Green route are also shown on this screen:
Tap the field with these details to switch the route to Green immediately.
5.1.6 Road safety cameras and other proximity alert points
There is a special proximity warning for road safety cameras (like speed or red light cameras) and other
proximity alert points (like schools or railroad crossings). These alert points are not part of Clarion Mobile
Map. You can download them from www.naviextras.com or you can upload points in a specific text file if
needed.
You can also add your own alert points or edit the previously uploaded points. See page 78 for details.
The application can warn you when you approach road safety cameras like speed cameras or dangerous
areas like school zones or railroad crossings. You can set up the different alert types individually in Sound
and Warning settings (page 91).
The following alert types are available:
•
Audio warning: beeps can be played (natural voice) or the type of the alert can be announced
(TTS) while you are approaching one of these points, and an extra alert can warn you if you
exceed the given speed limit while approaching.
•
Visual warning: the type of the alert point, its distance and the related speed limit appear on the
Map screen while you are approaching one of these cameras.
For some of the alert points, the enforced or expected speed limit is available. For these points, the audio
alert can be different if you are below or above the given speed limit.
•
Only when speeding: The audio alert is only played when you exceed the given speed limit.
•
When approaching: The audio alert is always played when approaching one of these alert points.
In order to draw your attention, the alert can is different when you exceed the speed limit.
86 NX404 English
The warning for road safety cameras is disabled when you are in a country where road safety
Note! camera warning is prohibited. However, you must ensure on your own liability that using this
feature is legal in the country where you intend to use it.
5.1.7 Speed limit warning
Maps may contain information about the speed limits of the road segments. Clarion Mobile Map is able to
warn you if you exceed the current limit. This information may not be available for your region (ask your
local dealer), or may not be fully correct for all roads in the map.
The maximum speed set in the vehicle profile is also used for this warning. Clarion Mobile Map alerts you
if you exceed the preset value even if the legal speed limit is higher.
Speed warning can be fine-tuned in Sound and Warning settings (page 91).
You can set the relative speed above which the application initiates the warning.
The following alert types are available:
•
Audio warning: you receive a verbal warning when you exceed the speed limit with the given
percentage.
•
Visual warning: the current speed limit is shown on the map when you exceed it (for example:
).
You can also choose to see the speed limit sign on the map all the time.
NX404 English 87
5.2 'More' menu
The 'More' menu provides you with various options and additional applications. On the map screen, tap
the following buttons:
Button
,
.
Description
You can configure the program settings, and modify the behavior of Clarion Mobile Map. Finetune route planning options, change the look of the Map screen, turn on or off warnings, or
restart the Configuration wizard, and so on.
See the next chapter for details.
Access travel applications: the unit converter helps you convert between various different
international units for temperature, speed, area or pressure, etc.
The scientific calculator helps you in all your calculation needs. Tap the Mode button for
additional functions and use the memory to save your results.
The Fuel consumption monitor helps you keep track of the consumption of your car even if you
do not use navigation for all your journeys. Set the initial odometer value and then record the
distance taken and fuel filled in whenever you fill your car. You can also set reminders for
regular car maintenance.
Tap this button to see the sunlit and dark areas of the world. Your current location and route
points are marked on the map. Tap the Details button to see the exact sunrise and sunset times
for all your route points (your current location, all waypoints and the final destination).
If you save your trip logs when you arrive at some of your destinations or let the application
automatically save the trip logs for you, those logs are all listed here. Tap one of the trips to see
the trip statistics, speed and altitude profile. If track log has also been saved, you can display it
on the map with the selected color. Track logs can be exported to GPX files for later use.
Select a country from the list and see useful driving information about the selected country.
Information may include speed limits on different road types, the maximum blood alcohol level
and any compulsory equipment you need to show when stopped by the police.
88 NX404 English
Run the Demo and watch sample route simulations to see how navigation works.
The About section provides you with product information. Read the Software and Database End
User License Agreement, or check the map and other contents of the application. You can also
access program usage statistics.
5.3 Settings menu
You can configure the program settings, and modify the behavior of Clarion Mobile Map.
On the map screen, tap the following buttons:
The Settings menu has several options. Tap
Button
,
,
.
or scroll with your finger to see the full list.
Description
Adjust the sound volume, mute your device or change the voice guidance language.
In addition, you can enable and set up different warnings and alerts.
The content of the Quick menu (page 20) is fully customizable. Tap the button you
want to change, and select its new function from the list.
These settings determine how routes will be calculated. Select the type of vehicle
you are driving, the road types used in route planning, and the route planning
method.
If more drivers use Clarion Mobile Mapfor navigating, their settings can be
remembered by using one of the user profiles.
You can fine-tune the appearance of the Map screen. Adjust the map view to your
needs, choose suitable color themes from the list for both daytime and night use,
change the blue arrow to a 3D car model, show or suppress 3D buildings, turn track
logging on or off, and manage you Place visibility sets (which Places to show on the
map).
Adjust how the software helps you navigate with different kinds of route related
information on the Map screen.
Display related settings.
NX404 English 89
These settings allow you to customize the application for your local language,
measurement units, time and date settings and formats, as well as to choose the
time zone.
Trip logs and track logs contain useful information about your trips. Trip logs can be
saved manually when you reach your destination or you can turn on the automatic
saving here.
The application collects usage information and GPS logs that may be used for
improving the application and the quality and coverage of maps. Here you can
enable or disable collecting these logs.
Modify the basic software parameters set during the initial setup process. For
details, see page 7.
These settings determine how user data is managed. There are three options:
•
Backup User Data: All user data and the current settings are saved on the
inserted USB Memory and each backup is stored in a new file.
•
Restore User Data: All user data and the settings are overwritten with the
information stored in the latest backup file.
•
Delete User Data: All the user backup files are deleted.
Delete all saved data and reset all settings to their factory defaults.
90 NX404 English
5.3.1 Sound and Warnings
Adjust the sound volume, mute your device or change the voice guidance language. In addition, you can
enable and set up different warnings and alerts.
Button
Description
Tap this button to adjust the volume of the different sounds in the application. A new
screen shows the different sound types and their controls. See below for details.
This button shows the current voice guidance profile. By tapping the button, you can
select a new profile from the list of available languages and speakers. Tap any of
these to hear a sample voice prompt. Just tap
selected the new spoken language.
when you have
Different voice profiles are capable of different levels of service:
•
Natural Voice: These prerecorded sounds can only tell you basic information
about turns and distances.
•
TTS Voice: These computed voices can tell you complex instructions, they
can tell you the street names or read out the system messages for you.
Tap this button to adjust the enhanced TTS features. The following settings are
available:
•
You can set the feature to read out traffic messages.
•
Whenever a route is calculated, the software can read out the quick summary
of the route.
•
When you cross country borders, the application can read out the information
about the country you have just entered.
•
All system messages can also be announced.
Street names sound correctly only if you use a native voice profile for the country.
You can decide whether the application
•
tries to read the street names in a foreign country,
•
use road numbers in your language or
•
announces the maneuver only.
You can also decide whether you want an announcement for distance maneuvers or
it is enough to receive the information when the turn is near.
Tap this button to set the verbosity of the voice instructions: how much they tell and
how often they speak.
NX404 English 91
Maps may contain information about the speed limits of the road segments. Clarion
Mobile Map is able to warn you if you exceed the current limit. This information may
not be available for your region (ask your local dealer), or may not be fully correct
for all roads in the map.
The maximum speed set in the vehicle profile is also used for this warning. Clarion
Mobile Map alerts you if you exceed the preset value even if the legal speed limit is
higher.
This setting lets you decide whether you wish to receive visible and/or audible
warnings.
Adjust the slider to set the relative speed above which the application initiates the
warning.
The following alert types are available:
•
Audio warning: you receive a verbal warning when you exceed the speed
limit with the given percentage.
•
Visual warning: the current speed limit is shown on the map when you
exceed it.
If you prefer to see the speed limit sign on the map all the time (normally it is shown
only if your speed exceeds it), you can set it here.
This feature allows you to receive a warning when approaching a Road Safety
Camera or other alert points like school zones or railroad crossings. You must
ensure on your own liability that using this feature is legal in the country where you
intend to use it.
You can set the alert for the different alert point categories individually. The
following alert types are available:
•
Audio warning: beeps can be played (natural voice) or the type of the alert
can be announced (TTS) while you are approaching one of these points, and
an extra alert can warn you if you exceed the given speed limit while
approaching.
•
Visual warning: the type of the alert point, its distance and the related speed
limit appear on the Map screen while you are approaching one of these
cameras.
For some of the alert points, the enforced or expected speed limit is available. For
these points, the audio alert can be different if you are below or above the given
speed limit.
•
Only when speeding: The audio alert is only played when you exceed the
given speed limit.
•
When approaching: The audio alert is always played when approaching one
of these alert points. In order to draw your attention, the alert is different
when you exceed the speed limit.
Maps may contain driver alert information. Tap this button to turn on or off these
warnings and to set the distance from the hazard to receive the warning at. These
can be set individually for the different warning types.
92 NX404 English
You can control the volume of the following sound types:
Button
Description
This is the main volume control. Use the hardware knob to adjust the main volume.
These controls affect the volume of the guidance sounds (verbal instructions).
Turn off the attention tone preceding verbal instructions or adjust its volume.
These controls affect the volume of the non verbal alert sounds (beeps).
Controls for each sound type:
Button
Volume slider
Description
Adjusts the volume of the related sound.
Use the switch to mute the related sound. The slider becomes inactive. Tap again to
re-enable.
5.3.2 Customize Quick menu
The content of the Quick menu (page 20) is fully customizable. Tap the button you want to change, and
select its new function from the list.
The list of available functions and their descriptions are on page 20.
5.3.3 Route settings
These settings determine how routes will be calculated.
Button
Description
On-road navigation creates a turn by turn itinerary using the road network on the
map. Switch to off-road navigation to navigate between destinations in a straight
line.
The route calculation can be optimized for different situations and vehicle types by
changing the planning method. See below for details.
If the selected routing method is not Green, you can have your route compared to
the best green alternative on the screen when confirming the route. If this alternative
is much better than the selected method, you can quickly switch to Green mode.
NX404 English 93
To let the route fit your needs, you can also set which road types are to be considered for or to be
excluded from the route if possible.
Excluding a road type is a preference. It does not necessarily mean total prohibition. If your destination
can only be accessed using some of the excluded road types, they will be used but only as much as
necessary. In this case a warning icon will be shown on the My Route screen, and the part of the route
not matching your preference will be displayed in a different color on the map.
In the list of road types you can see in how many segments and what total length of the road type is used
in the current route.
Button
Description
You might need to avoid freeways when you are driving a slow car or you are
towing another vehicle.
Charge roads are pay roads where you can purchase a pass or vignette to use the
road for a longer period of time. They can be enabled or disabled separately from
toll roads.
Clarion Mobile Map includes toll roads (pay roads where there is a per-use charge)
in the routes by default. If you disable toll roads, Clarion Mobile Map plans the best
toll-free route.
Clarion Mobile Map includes ferries in a planned route by default. However, a map
does not necessarily contain information about the accessibility of temporary ferries.
You might also need to pay a fare on ferries.
Clarion Mobile Map excludes unpaved roads by default: unpaved roads can be in a
bad condition and usually you cannot reach the speed limit on them.
Carpool or HOV lanes can be used if a given number of passengers are traveling in
the vehicle. You should check whether you are allowed to use carpool lanes before
enabling this road type.
94 NX404 English
Vehicle profiles:
When you tap
, you can set the following parameters:
Button
Description
Tap this button to rename the profile for something meaningful.
Enter the average consumption of your vehicle when used in built-up areas. The
unit for consumption can be set in Regional Settings.
Enter the average consumption of your vehicle when used on highways. The unit for
consumption can be set in Regional Settings.
Select the engine and fuel type of your vehicle. This helps in estimating the CO2
emission.
Enter the average fuel price for travel cost calculation. The currency can be set in
Regional Settings.
Set the maximum speed you travel with the vehicle.
Check this box to enable more settings for the below parameters.
Set the total length of the vehicle.
Set the width of the vehicle.
Set the height of the vehicle.
Set if there is a trailer attached to the vehicle.
Set the maximum allowed weight of the vehicle.
Set the actual weight of the vehicle.
Select one or more hazard types if the vehicle carries dangerous material.
NX404 English 95
Route Planning Method types:
Button
Description
Gives a quick route if you can travel at or near the speed limit on all roads. Usually
the best selection for fast and normal cars.
Gives a short route to minimize the distance to travel. It can be practical for slow
vehicles. Searching for a short route regardless of the speed, this route type is
rarely practical for normal vehicles.
Gives a quick but fuel efficient route based on the fuel consumption data given in
Route settings (page 93). Travel cost and CO2 emission calculations are estimations
only. They cannot take elevations, curves and traffic conditions into account.
Results in a route with fewer turns and no difficult maneuvers. With this option, you
can make Clarion Mobile Map to take, for example, the freeway instead of a series
of smaller roads or streets.
5.3.4 User profiles
If more drivers use Clarion Mobile Mapfor navigating, their settings can be remembered by using one of
the user profiles. Rename the profiles after tapping the edit button on the right so that all users know
which profile to use and switch between profiles by tapping its name. If you select a new profile, the
application restarts so that the new settings can take effect.
96 NX404 English
5.3.5 Map settings
You can fine-tune the appearance of the Map screen. Adjust the map view to your needs, choose suitable
color themes from the list for both daytime and night use, change the blue arrow to a 3D car model, show
or hide 3D buildings, turn track logging on or off, and manage you Place visibility sets (which Places to
show on the map).
The map is always shown on the screen so that you can see the effect when you change a setting.
Button
Description
Switch the map view between a 3D perspective view and a 2D top-down view.
Adjust the basic zoom and tilt levels to your needs. Three levels are available.
When selected, the map zooms out to show an overview of the surrounding area if
the next route event (maneuver) is far. When you get close to the event, the normal
map view returns.
Switch between daytime and night color modes or let the software switch between
the two modes automatically a few minutes before sunrise and a few minutes after
sunset.
Select the color scheme used in daytime mode.
Select the color scheme used in night mode.
Replace the default position marker to one of the 3D vehicle models. You can select
separate icons for different vehicle types selected for route planning. Separate icons
can be used for car, pedestrian and the other vehicles.
Show or suppress 3D landmarks, 3D artistic or block representations of prominent
or well-known objects.
Show or suppress 3D city models, 3D artistic or block representation of full city
building data containing actual building size and position on the map.
NX404 English 97
Show or suppress the 3D elevation of the surrounding terrain.
Turn on or off track log saving, that is, saving the sequence of the locations your
journeys go through.
Select which Places to show on the map while navigating. Too many Places make
the map crowded so it is a good idea too keep as few of them on the map as
possible. For this, you have the possibility to save different Place visibility sets. You
have the following possibilities:
•
Tap the checkbox to show or hide the Place category.
•
Tap the name of the Place category to open the list of its subcategories.
•
Tap
to save the current Place visibility set or to load a
previously saved one. Here you can also revert to the default visibility
settings.
5.3.6 Visual guidance settings
Adjust how the software helps you navigate with different kinds of route related information on the Map
screen.
The data fields in the corner of the Map screen can be customized. Tap this button
and select the values you want to see. The values can be different when you
navigate a route from when you are just cruising without a given destination. You
can select general trip data like your current speed or the altitude, or route data
related to your final destination or the next waypoint on your route.
You may need a gas station or a restaurant during your journey. This feature
displays a new button on the map when you are driving on freeways. Tap this button
to open a panel with the details of the next few exits or service stations. Tap any of
them to display it on the map and add it as a waypoint to your route if needed.
Select the service types displayed for the freeway exists. Choose from the POI
categories.
Whenever adequate information is available, lane information similar to the real
ones on road signs above the road is displayed at the top of the map. You can turn
this feature on or off.
If you are approaching a freeway exit or a complex intersection and the needed
information exists, the map is replaced with a 3D view of the junction. You can turn
this feature on or let the map be displayed for the whole route.
98 NX404 English
When entering tunnels, the surface roads and buildings can be disturbing. This
feature shows a generic picture of a tunnel instead of the map. A top-down overview
of the tunnel and remaining distance are also displayed.
Turn on the route progress bar to see your route as a straight line on the left side of
the map. The blue arrow represents your current position and moves up as you
travel. Waypoints and Traffic events are also displayed on the line.
When you slow down while driving on a freeway, there is a chance that you are in a
traffic jam so Clarion Mobile Map offers you a detour using the next exit. The
message shows you distance of the exit and the difference in distance and
estimated time compared to the original route. You can choose from one of the
following options:
•
Tap Dismiss or just ignore the message if you want to keep the original route.
•
Tap Preview to see the overview of the original route and the detour to make
the decision. You can accept the detour as offered or increase the bypassed
freeway segment before accepting.
•
Turn to the suggested new direction and the route will be automatically
recalculated.
Similar to the above possibility, alternative routes can be suggested when driving on
normal roads. Clarion Mobile Mapwill select a different turn in the upcoming
intersection and offers you a different route for the next section of the route.
Your options are the similar as above but you cannot modify the offered detour.
Parking at the destination may not be easy in city areas. As you approach the
destination, Clarion Mobile Map can offer parking category Places near your
destination. Tap the "P" button to open a top-down map with the destination and the
offered parking Places. Select one and modify the route accordingly.
If you leave the recommended route and suddenly exit the freeway, the application
offers different alternatives near the exit like gas stations or restaurants. Also, if
there are avoidable parts of the original route ahead (like a tunnel, a toll road or a
ferry), you will find them in the list in case you want to bypass them with the help of
Clarion Mobile Map.
NX404 English 99
5.3.7 Display settings
Display related settings include menu animations, separate skins for daytime and night use and the
brightness of the display.
When animation is turned on, buttons on menus and keyboard screens appear in an
animated way. Screen transitions are also animated.
5.3.8 Regional settings
These settings allow you to customize the application for your local language, measurement units, time
and date settings and formats, as well as to choose the time zone.
Button
Description
This button displays the current written language of the user interface. By tapping
the button, you can select a new language from the list of available languages. The
application will restart if you change this setting; you are asked to confirm this.
You can set the distance units to be used by the program. Clarion Mobile Map may
not support all the listed units in some voice guidance languages.
Select between 12 and 24 hours time display and the various international date
display formats.
You can also set other country specific units used to display different values in the
application.
By default, time zone is taken from the map information and adjusted by your
current location. Here you can set time zone and daylight saving manually.
5.3.9 Trip monitor settings
Trip logs contain useful information about your trips. Trip logs can be saved manually when you reach
your destination or you can turn on the automatic saving here. You can access these logs in the Trip
monitor. Trip monitor is available from the More menu.
Trip monitor can record statistical data of your trips. If you need these logs later, you
can let the application save them automatically for you.
This is not a button. This line shows the current size of the trip database, the sum of
all trip and track logs saved.
100 NX404 English
Track logs, the sequence of the positions given by the GPS receiver, can be saved
together with trip logs. They can later be displayed on the map. You can let the
application save the track log whenever it saves a trip.
5.3.10 Log collection settings
If you accept this when first using the application, it collects usage information and GPS logs that may be
used for improving the application and the quality and coverage of maps. The data is processed
anonymously; no one will be able to track any personal information.
Here you can enable or disable collecting these logs.
Anonymous statistical information on using the navigation software is collected for
later development purposes. Understanding how different people use the
application can help us improve the user interface and the program workflow.
Anonymous track logs are collected for later development purposes. Your trips can
help us improve the quality and coverage of maps.
NX404 English 101
6 Glossary
2D/3D GPS reception
The GPS receiver uses satellite signals to calculate its (your) position and needs at least four signals to
give a three-dimensional position, including elevation. Because the satellites are moving and because
objects can block the signals, your GPS device might not receive four signals. If three satellites are
available, the receiver can calculate the horizontal GPS position but the accuracy is lower and the GPS
device does not give you elevation data: only 2D reception is possible.
Active route
The currently navigated route. Whenever the destination is set, the route is active until you delete it, reach
your destination or you quit Clarion Mobile Map. See also: Route.
City Center
The city/town center is not the geometric center of the city/town but an arbitrary point the map creators
have chosen. In towns and villages, it is usually the most important intersection; in larger cities, it is one of
the important intersections.
Color theme
Clarion Mobile Map comes with different color themes for daytime or night use of the map and menu
screens. Themes are custom graphic settings and they can have different colors for streets, blocks or
surface waters in 2D and 3D modes, and they display shades or shadows in different ways in 3D mode.
One daytime scheme and one night scheme is always selected for the map and for the menus. Clarion
Mobile Map uses them when it switches from day to night and back.
GPS accuracy
Several factors have impact on the deviation between your real position and the one given by the GPS
device. For example, signal delay in the ionosphere or reflecting objects near the GPS device have a
different and varying impact on how accurately the GPS device can calculate your position.
Map
Clarion Mobile Map works with digital maps which are not simply the computerized versions of traditional
paper maps. Similarly to the paper road maps, the 2D mode of digital maps show you streets, roads, and
elevation is also shown by colors.
In 3D mode, you can see the altitude differences, for example valleys and mountains, elevated roads, and
in selected cities 3D landmarks and 3D buildings are also displayed.
102 NX404 English
You can use digital maps interactively: you can zoom in and out (increase or decrease the scale), you
can tilt them up and down, and rotate them left and right. In GPS-supported navigation, digital maps
facilitate route planning.
North-up map orientation
In North-up mode the map is rotated so its top always faces North. This is the orientation for example in
Find on Map.
Road Safety Camera
Special alert points for speed, red light or bus lane cameras. Different data sources are available. You
can configure Clarion Mobile Map to warn you when you approach one of these cameras.
Detecting the location of Road Safety Cameras is prohibited in certain countries. It is the sole
responsibility of the driver to check whether this feature can be used during the trip.
The software is capable of showing and warning for more than just cameras. Various other types of
proximity alert points like school zones and railroad crossings are also available.
Route
A sequence of route events, i.e. maneuvers (for example, turns and traffic circles) to reach the
destination. The route contains one start point and one or more destinations. The start point is the current
(or last known) position by default. If you need to see a future route, the start point can be replaced with
any other given point.
Track-up map orientation
In Track-up mode the map is rotated so its top always points in the current driving direction. This is the
default orientation in 3D map view mode.
Vehimarker
The current position is shown with a blue arrow on the map by default. The direction of the blue arrow
shows the current heading. This position marker can be replaced with different 3D vehicle symbols. You
can even specify different Vehimarkers for different route types (depending on which vehicle type is
selected for route calculation).
NX404 English 103
7 End User License Agreement
1 The contracting parties
1.1 This Agreement has been entered into by and between NNG Software Developing and Commercial
Ltd. (registered seat: 23 Bérc utca, H-1016 Budapest, Hungary; company reg.no.: 01-09-891838) as
Licensor (hereinafter: Licensor) and You as the end user (hereinafter: User; the User and the Licensor
jointly referred to as: Parties) in subject of the use of the products specified in this Agreement, including
software products, databases and content .
2 Conclusion of the Agreement
2.1 The Parties hereby acknowledge that this Agreement shall be concluded by implicit conduct of the
Parties without signing the Agreement.
2.2 The User hereby acknowledges that following the lawful acquisition (online purchase from authorized
vendor or preinstalled on purchased Device) of the software product constituting the object of this
Agreement (Section 4), any degree of use, installation into a computer or other hardware equipment
(mobile phone, multi-function device, personal navigation device, in-car navigation or multi function head
unit, etc.) (hereinafter referred to as: “Device”), installation of such Device into a vehicle, pressing of the
“Accept” button displayed by the software during installation or use (hereinafter referred to as: “Use”) shall
mean that the User has accepted the terms and conditions of this Agreement as legally binding. The time
of conclusion of the present Agreement is the time of executing the first action of use (commencement of
use).
2.3 This Agreement shall by no means authorize Use of the software product by those persons having
unlawfully acquired the software product or having unlawfully installed it on a Device or in a vehicle.
2.4 U.S. Government Users. If you acquire the Software Product by or on behalf of the United States
Government or any other entity seeking or applying rights similar to those customarily claimed by the
United States Government, you are on notice that the Software Product and the Databases, content and
services are commercial items as that term is defined at 48 C.F.R (“FAR”) 2.101 and that all use of the
Software Product is subject to this Agreement.
3 Applicable laws and regulations
3.1 Any action related to this Agreement will be governed by the laws of the Republic of Hungary, with
specific reference to Act IV of 1959 on the Civil Code and to Act LXXVI of 1999 on Copyrights (the
“Copyright Act”) shall apply. The United Nations Convention on Contracts for the International Sales of
Goods is hereby excluded from application to this EULA.
3.2 The parties hereby agree that the courts of the Republic of Hungary will have exclusive jurisdiction to
rule on any disputes arising in connection with this Agreement.
3.3 The original language version of this Agreement is the Hungarian version. This Agreement has
versions in other languages as well. In case of dispute the Hungarian version shall prevail.
4 Object of the Agreement and Termination
4.1 The object of this Agreement shall be the navigation guidance software product of Licensor
(hereinafter referred to as: the “Software Product”).
4.2 The Software Product shall include the operating computer program, its complete documentation, the
map database pertaining thereto and any third-party contents and services accessible through the
Software Product (hereinafter together referred to as: the “Database”).
4.3 Any form of display, storage, coding, including printed, electronic or graphic display, storage, source
or object code, or any other as yet undefined form of display, storage, or coding, or any medium thereof
shall be deemed parts of the Software Product.
4.4 Error corrections, additions, updates or upgrades to the Software Product or the Databases used by
the User following the conclusion of this Agreement shall also be deemed parts of the Software Product
and Used in accordance with this Agreement.
104 NX404 English
4.5. Your rights under this Agreement will terminate immediately without notice from Licensor if you
materially breach it or take any action in derogation of Licensor's and/or its licensors' rights to the
Software Product. Licensor may terminate this Agreement if any Software Product becomes, or in
Licensor's reasonable opinion likely to become, the subject of a claim of intellectual property infringement
or trade secret misappropriation. Upon termination, you will cease use of, and destroy Software Product
and all parts of it and confirm compliance in writing to Licensor, if requested.
5 Rights under copyright
5.1 Unless otherwise provided by law or contractual provisions, the Licensor is the sole and exclusive
owner of all material copyrights vested in the Software Product.
5.2 Copyrights extend to the whole Software Product and to its parts separately as well.
5.3 The owner(s) of the copyrights of the Database or certain works protected by intellectual property
rights, that are forming part of the Software Product is (are) the Licensor, or natural person(s) or corporate
entity(ies) owners of certain Databases (hereinafter referred to as: “Database Owner”). Some Database
Owners are listed in the “About” or similar menu item of the Software Product. The Licensor hereby states
that it has obtained sufficient usage and representation rights from the Database Owners in order to
utilize the Database, to offer it for utilization and to transfer it for utilization as set forth in this Agreement.
5.4 Pursuant to this Agreement, all rights vested in the Software Product shall remain in the ownership of
the Licensor, except for those to which the User is entitled under law or by virtue of this Agreement.
6 Rights of the User
6.1 By default the User is entitled to install the Software Product on one Device having a single GPS
sensor built in, and to run and use one copy of the Software Product or a preinstalled copy of the
Software Product thereon. The Software Product and Database is for the User’s personal or internal
business use only.
6.2 The User is entitled to make one backup copy of the Software Product. However, if the Software
Product operates after installation without the use of the original media copy, then the original media copy
shall be deemed to be a backup copy. In all other cases, the User is only entitled to use the backup copy
if the original media copy of the Software Product has been ascertainably and unequivocally rendered
unsuitable for its lawful and intended use.
6.3 In the event that the Software Product comes preinstalled on- or otherwise licensed together with the
Device or purchased online for and installed by the User for a specific Device, the Software Product shall
be tied to the Device and may not be separated-, transferred to-, or used with another Device or sold to
another User without selling the Device itself.
6.4 The Database, content or services provided to User may only be used together with User’s copy of
the Software Product and may not be used separately or with another copy of the Software Product.
7 Limitations of use
7.1 The User is not entitled
7.1.1 to duplicate the Software Product (to make a copy thereof) except to the extent allowed by this
Agreement or Applicable law;
7.1.2 to resell, sublicense or use it for commercial purposes, use to lease, rent or lend it, or to transfer it
to a third person for any reason without transferring the Device on which it was first legally installed on
(see section 6.3);
7.1.3 to translate the Software Product (including translation (compilation) to other programming
languages);
7.1.4
to decompile, disassemble, or reverse engineer the Software Product;
7.1.5 to evade the protection of the Software Product or to modify, circumvent or obviate such
protection through technological or by any other means;
NX404 English 105
7.1.6 to modify, extend, transform the Software Product (in whole or in part), to separate it into parts,
combine it with other products, install it in other products, utilize it in other products, not even for the
purpose of achieving interoperability with other devices;
7.1.7 apart from using the computer program, to obtain information from the Database as a part of the
Software Product, to decompile the Database, to use, copy, modify, extend, transform the Database in
whole or in part or the group of data stored therein, or to install it in other products or otherwise, utilize it
in other products or to transfer it, not even with the aim of achieving interoperability with other products.
7.2 The User may only use the Databases, content and services available through the Software Product
and provided by third parties and the data received through the services provided by third parties
(including but not limited to the traffic data received from the RDS TMC or on-line TMC traffic information
service) for his/her own personal benefit and at his/her own risk. It is strictly prohibited to store, to transfer
or to distribute these data or contents or to disclose them in full or in part to the public in any format or to
download them from the product.
7.3 The User is not entitled to remove, modify or obscure of any copyright, trademark notice, or restrictive
legend included in the Software Product, the Database, content or services.
8 No warranty, limitation of liability
8.1 The Licensor hereby informs the User that although the greatest care was taken in producing the
Software Product, given the nature of the Software Product and its technical limitations, the Licensor does
not provide a warranty for the Software Product being completely error-free, and the Licensor is not
bound by any contractual obligation whereby the Software Product obtained by the User should be
completely error-free.
8.2 THE LICENSED SOFTWARE PRODUCTS, DATABASES, CONTENT AND SERVICES ARE
PROVIDED ON AN “AS IS” AND “WITH ALL FAULTS BASIS” (INCLUDING NO WARRANTY FOR THE
CORRECTION OF FAULTS) AND LICENSOR, THE DATABASE OWNERS AND THIRD PARTY
SUPPLIERS EXPRESSLY DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY,
SATISFACTORY QUALITY, ACCURACY, TITLE AND FITNESS FOR A PARTICULAR PURPOSE. NO
ORAL OR WRITTEN ADVICE OR INFORMATION PROVIDED BY LICENSOR OR ANY OF ITS
AGENTS, DATABASE OWNERS, EMPLOYEES OR THIRD PARTY PROVIDERS SHALL CREATE A
WARRANTY, AND USER IS NOT ENTITLED TO RELY ON ANY SUCH ADVICE OR INFORMATION.
THIS DISCLAIMER OF WARRANTIES IS AN ESSENTIAL CONDITION OF THE AGREEMENT.
Licensor does not warrant that the Software Product, Database, content or service are capable of
interoperating with any other system, Device or product (e.g. software or hardware).
8.3 The Licensor does not assume any responsibility for damages incurred due to an error in the
Software Product (including errors of the computer program, the documentation and the Database).
8.4 The Licensor does not assume any responsibility for damages incurred due to the Software Product
not being applicable for any defined purpose, or due to the error or incompatibility of the Software Product
with any other system, device or product (e.g. software or hardware).
8.5 NEITHER LICENSOR NOR ITS SUPPLIERS SHALL BE LIABLE TO USER FOR ANY INCIDENTAL,
CONSEQUENTIAL, SPECIAL, INDIRECT OR EXEMPLARY DAMAGES ARISING OUT OF THIS
AGREEMENT, INCLUDING LOST PROFITS OR COSTS OF COVER, LOSS OF USE OR BUSINESS
INTERRUPTION OR THE LIKE, REGARDLESS OF WHETHER THE PARTY WAS ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
NOTWITHSTANDING ANYTHING TO THE CONTRARY CONTAINED HEREIN, THIRD PARTY
SUPPLIERS (E.G. DATABASE OWNERS, MAP PROVIDERS) OR AGENTS OF LICENSOR SHALL
HAVE NO MONETARY LIABILITY TO THE USER FOR ANY CAUSE (REGARDLESS OF THE FORM
OF ACTION) UNDER OR RELATING TO THIS AGREEMENT.
8.6 The Licensor also draws the attention of the User to the fact that, when using the Software Product in
any form of vehicle, observing the traffic regulations and rules (e.g. use of obligatory and/or reasonable
and suitable security measures, proper and generally expected care and attention in the given situation,
and special care and attention required due to the use of the Software Product) is the exclusive
106 NX404 English
responsibility of the User. The Licensor shall not assume any responsibility for any damages occurred in
relation to use of the Software Product in a motor vehicle.
8.7 By concluding the Agreement, the User shall, in particular, acknowledge the information stated in
Section 8 above.
9 Sanctions
9.1 The Licensor hereby informs the User that, if the Licensor finds its rights under the Copyright Act to
be breached, the Licensor may
9.1.1
seek judicial recognition of this breach;
9.1.2 demand that the breach cease and order the person in breach to refrain from continuing such
actions;
9.1.3 demand that the person under breach give proper compensation (even by way of publicity at the
expense of the person in breach);
9.1.4
claim the return of the increase of assets due to the breach;
9.1.5 demand the cease of the wrongful action and, demand restitution to its state before the breach
was committed at the expense of the person in breach, and may demand the destruction of instruments
and materials used to commit the breach as well as of the products created by the breach;
9.1.6 claim for damages.
9.2 The Licensor hereby also informs the User that the breach of copyrights and related rights is a crime
under Act IV of 1978 on the Hungarian Criminal Code, which may be sentenced of two years in prison in
basic cases and up to eight years in prison in aggravated cases.
9.3 Content and services provided by third parties. The Licensor hereby excludes any liability of its own
for the Database in the Software Product and for any content or service provided by a third party by using
the Database. The Licensor does not warrant the quality, suitability, accuracy, fitness for a specific
purpose or territorial coverage of the Database, content, product or service or the availability of the
Database, content, product or service, and it specifically excludes any liability for the suspension or
cancellation of the service, and any damage arising in relation to the service or for complete cancellation
of the service. User acknowledges that the mapping data in Databases contains geographical data and
other data.
The User hereby acknowledges that (i) inaccurate or incomplete information due to the passage of time,
changing circumstances, sources used and the nature of collecting comprehensive geographic data, may
each lead to incorrect results; and (ii) that the Database, contents and services provided by third parties
may only be used at the risk of the User and for the personal or internal business benefit of the User.
User acknowledges that the Databases, content and services are the confidential information of Database
Owners and disclosure of the Databases to third parties is prohibited.
USE OF THE SOFTWARE PRODUCT’S REAL TIME ROUTE GUIDANCE FUNCTION IS AT USER’S
SOLE RISK AS LOCATION DATA MAY NOT BE ACCURATE.
9.4 Content and services provided by the Licensor or an agent of the Licensor. For certain Software
Products the Licensor or a contractual partner may offer various products and services to the User
through www.naviextras.com. The User may only use these services when the User has read and
understood the relevant end user license agreement(s) at www.naviextras.com and the User is obliged to
use the services in line with the terms and conditions thereof.
9.5 Purchase and acquisition of activation license for the use of certain functions, Databases, content or
services may require Internet connection with no alternative way of acquisition offered by Licensor.
10 Anonymous data collection
10.1 The User hereby acknowledges that the Software Product may collect, transmit to Licensor or third
parties, and in some cases store data connected to the usage of the Software Product by the User (e.g.
movement/route data, user interaction data). Such data collection functions may be disabled or enabled
NX404 English 107
by User any time from within the corresponding menu. The collected data is always anonymous, not
associated in any way with any personal information of the User or with the User itself.
10.2 The collected data may be uploaded to Licensor’s database or transmitted periodically or in real time
to a third party partner and used exclusively for the purpose of enhancing and improving the precision
and reliability of features and services of the Software Product and the Databases. Uploading is executed
through Licensor’s special software or by the User navigation device, and the upload may be enabled or
disabled by User. After successful data upload, the collected data is deleted from the Software Product
storage media.
10.3 Collected data is transmitted, stored and handled anonymously and no connection of the data with
the User shall be established by Licensor or any third party.
10.4 Licensor hereby informs the User, that if it accesses the Internet through mobile data service while
abroad or otherwise roaming another mobile network the transmission of such data may result in special
roaming charges. To avoid such charges it is the responsibility of the User to disable mobile data services
while roaming or to turn off the data collection functions of the Software Product.
11 Online Content Service Auxiliary Terms
11.1 For online content services the following auxiliary terms shall also apply. Database content (e.g.
weather-, traffic info, location based info) may be supplied by Licensor to the User’s Device through an
Internet connection (hereinafter: "Online Content Services"). Such Content may be granted for a fee or
free of charge subject to Licensor’s decision. Ensuring access to the Internet is the responsibility of the
User.
11.2 Online Content Services in general are not available in all countries, furthermore different conditions
and Service characteristics may apply in different countries. Use of certain Online Services may be
prohibited in various countries. It is the User's responsibility to comply with country specific regulation.
Licensor excludes its liability for the consequences of illegal use of such functions and User shall
indemnify and hold Licensor harmless from all claims against Licensor from authorities or third parties due
to the illegal use.
11.3 Online Content is downloaded by the Software Product from Service Provider's Online content
servers. The Licensor hereby excludes any liability of its own for the Online content. The Licensor does
not warrant the quality, suitability, accuracy, fitness for a specific purpose or territorial coverage of the
Online content, furthermore no warranty is offered regarding the availability (e.g. uptime) of Online
content servers. User acknowledges that in any territory or time, slow- or non-connectivity may be
experienced due to capacity limitations of Licensor's servers. The Software Product may allow the User to
access and communicate third party servers directly. In such cases use of such servers is for User's own
risk entirely. Licensor shall not undertake any liability whatsoever for such servers and services accessed
and received directly form third parties.
11.4 User acknowledges that the data or information provided through Online Content Services is not
updated in real-time and may not accurately reflect the real life situation or events.
11.5 The User hereby acknowledges that the Online Content Services may only be used at the risk of the
User and for the personal benefit of the User. It is the sole responsibility of the User to provide and
maintain a connection to the public Internet network. User accepts that the usage of the Online Content
Services generates data traffic (up- and downstream) and may result in increased data service fees
payable by User.
11.6 Online Content Services may provide data, information or materials supplied and/or licensed by third
parties to Licensor. For such materials different terms and conditions imposed by such third parties may
apply. Applicable third party terms shall be referred in the "About" section of the Software Product or as
part of this Agreement. When first using / enabling Online Content, User accepts compliance with those
third party terms and conditions.
11.7 Discontinuation. Licensor reserves the right to discontinue provision or access to any Online Content
Service with or without prior notice to the User. Such discontinuation shall not entail any consequences
other than here stated. In case of discontinued Online Content Services that were (i) provided for a prepaid fee, AND (ii) such fee covers the use of the Online Content Service for a definite term (i.e. pre-paid
108 NX404 English
subscription service), User shall be entitled to a refund proportionate to the term remaining from such
definite term from the time of the discontinuation.
11.8. Community Services. Some Online Content Services may be based on data and information
uploaded by participating individuals (Users or other persons) or a Database created and maintained by a
group of such individuals. Such data may not come from a trusted source and may also be intentionally
false or misleading, as Licensor does not have any means to control or verify the credibility or accuracy of
such data or the individuals providing the data. Therefore User accepts that community type Online
Content Services must be used with extreme care.
By participating in the community by providing data or any information via the Software Product or other
means offered by Licensor (e.g. through a website or other software), User shall accept the following:
(a) Licensor is granted a royalty free right to use the data uploaded, in particular, to modify, display, make
available to the public, distribute, copy the data for any purpose;
(b) User warrants that not third party has any rights that would hinder or render impossible the use of the
data as set out in (a) above, and that no third party rights are infringed by uploading the data on those
conditions;
(c) User indemnifies and holds harmless Licensor from any claim from a third party against Licensor due
to violation of its rights regarding the uploaded data.
12 Third Party Terms
12.1 Google Local Search. User acknowledges that Google Local Search (GLS) functionality is provided
by the usage of Google, Inc.'s service to the User. User hereby accepts all conditions of Google's Terms
of Service provided at http://www.google.com/accounts/TOS . User accepts that the Google Local Search
is declared "deprecated" and is not commercially supported by Google, Inc. and also it may be made
unavailable without notice by Google in accordance with the relevant terms of service at
http://code.google.com/intl/hu-HU/apis/websearch/terms.html .
NX404 English 109
8 Copyright note
The product and the information contained herein are subject to change without prior notification.
This manual may not, in whole or in part, be reproduced or transmitted in any form either electronically or
mechanically, including photocopying and recording, without the express written consent of Clarion.
© 2013 - Clarion
© 2006 – 2013 TomTom. All rights reserved. This material is proprietary and the subject of copyright
protection, database right protection and other intellectual property rights owned by TomTom or its
suppliers. The use of this material is subject to the terms of a license agreement. Any unauthorized
copying or disclosure of this material will lead to criminal and civil liabilities.
All rights reserved.
110 NX404 English
•ib!·'M'h
clarion
GARANTIE LIMITEE DE 1 AN CLARION
Pour ie Canada et les Etats-Unis seulement
Ce produit Clarion vendu par un marchand autorise Clarion est garanti contre tous defauts de materiel et de
fabrication pour une duree d'un (1) an compter de Ia date de vente initiale lorsque l'achat est effectue chez un
marchand autorise Clarion; les items tels les piles sont couverts par une garantie de 6 mois suivants Ia date d'achat.
Tous cablages, fils et autres accessoires Clarion achetes chez un marchand autorise Clarion, sont garantis contre tous
defauts de materiel ET de fabrication pour une duree de quatre-vingt-dix (90) jours suivant Ia date d'achat initiale.
a
TOUT ACHAT DE PRODUITS CLARION EFFECTUE CHEZ UN MARCHAND NON-AUTORISE CLARION SERA
SOUMIS ADES RESTRICTIONS DE GRANANTIES DECRITES CI-DESSOUS.
Les conditions de cette garantie limitee et !'implication de Ia responsabilite de Clarion Corporation of America
ou Clarion Canada lnc ... Ciarion .. sous cette garantie limitee sont les suivantes:
1. UNE PREUVE DE DATE D 1ACHAT D'UN MARCHAND AUTORISE CLARION EST REQUISE POUR SERVICE
SOUS GARANTIE DE CE PRODUIT. DES INFORMATIONS SUPPLEMENTAIRES CONCERNANT LES CENTRES
DE SERVICES AUTORISES PAR CLARION PEUVENT ETRE OBTENUES EN CONTACTANT CLARION A UNE
DES ADRESSES ENUMEREES CI-BAS.
2. Cette Garantie Limitee sera an{lulee si un dommage est survenu au bien lors d'un service effectue par une
personne ou entreprise qui n'est pas accredite comme un Centre de Service et Garantie Clarion.
a
a
3. Cette Garantie Limitee n'est aucunement applicable un produit sujet l'abus, negligence, accidentes, mal install'
ou utilisation incorrects ou que les numeros de serie ont ete modifies, obstrues ou effaces, ou qui a ete raccordes,
installes, ajustes ou repares autrement qu'indique par Clarion.
4. Cette Garantie Limitee ne couvre pas les interferences electrostatiques, electriques ni les frais relies
manutention pour le retrait ou Ia reinstallation.
,
a Ia
I
5. La responsabilite de Clarion sous cette Garantie Limitee est limitee uniquement a Ia reparation ou au remplacement
du produit, qui est sujet uniquement a Ia discretion de Clarion.
6. Ce produit doit est retourne dans son emballage d'origine ou equivalent. Le colis doit etre entierement assure et
tous frais de transport doivent etre prepayes. Clarion n'assumera aucune responsabilite en cas de perte ou
dommages survenue lors du transport.
7. TOUS PRODUITS CLARION ACQUIS PAR L'ENTREMISE AUTRE QUE PAR UN MARCHAND AUTORISE PAR
CLARION, INCLUANT TOUS ACHATS VIA UN MARCHAND VIRTUEL (ACHAT INTERNET) QUI N 1EST PAS
AUTORISE PAR CLARION, NE SONT PAS COUVERTS PAR LES GARANTIES LIMITEES DE CLARION, ET CE,
EN ACCORD AVEC LES LIMITATIONS DEFINIES PAR LA LOI. DANS LE CAS OU LES LOIS APPLICABLES NE
PERMETTENT PAS L 1ELIMINATION DES GARANTIES SOUS CES CONDITIONS, LAPERIODE DE GARANTIE
LIMITEE QUI s•APPLIQUE AU PRODUIT SERA DE QUINZE(15) JOURS A PARTIR DE LA DATE D•ACHAT INITIALE.
8. AUCUNE GARANTIE IMPLICITE NE POURRA s•ETENDRE AU-DELA DE LA PERIODE DE GARANTIE DECRITE
CI-DESSUS, ET CE, EN ACCORD AVEC LES LIMITES DEFINIES PAR LA LOI. CLARION NE POURRA EN AUCUN
CAS ETRE TENUE RESPONSABLE DES PERTES OU DOMMAGES DIRECTS OU INDIRECTS DUS AL•UTILISATION
OU L 11MPOSSIBILITE D'UTILISATION DU PRODUIT. PUISQUE CERTAINS ETATS OU PROVINCES NE
PERMETTENT PAS DE LIMITER LA DUREE DES GARANTIES IMPLICITES, OU DE LIMITER LA RESPONSABILITE EN
CAS DE DOMMAGES DIRECTS OU INDIRECTS, CES LIMITATIONS OU EXCLUSIONS PEUVENT NE PAS
s·APPLIQUER A vous.
9. CETTE GARANTIE LIMITEE VOUS DONNE DES DROITS LEGAUX PRECIS. VOUS POUVEZ POSSEDER DES
DROITS SUPPLEMENTAIRES SELON VOTRE LIEU DE RESIDENCE.
10. Les lois de l'etat de Ia California regissent totalement cette garantie limitee, son interpretation et sa mise en execution.
11. Si vous eprouvez des problemas de performance du produit pendant Ia periode de garantie, veuillez communiquer
avec Clarion ou visitez notre site Web a l'adresse ci-dessous afin d'obtenir une resolution de tout problema relie
aux produits Clarion.
Aux Etats-Unis:
Clarion Corporation of America
Attn:Customer Service Manager
6200 Gateway Drive Cypress, CA 90630
1-800-GO-CLARION
www.clarion.com
Au Canada:
Clarion Canada Inc.
Centre de Service et Garantie
2239 Winston Park Drive
Oakville, Ontario L6H 5R1
(905)829-4600
www.clarion.com
•:nmmnt
281-0639-01 2008/9
clarion
CLARION 1 YEAR LIMITED WARRANTY
For USA and Canada only
This Clarion product purchased from an authorized Clarion dealer are warranted against all defects in materials and
workmanship for a period of one (1) year from the date of original purchase other than consumable parts, such as
the battery pack, which are covered for 6 months from the date of purchase, when purchased from AND installed
by an authorized Clarion dealer.
All Clarion cables, wires and other accessories if purchased from an authorized Clarion dealer are warranted against
all defects in materials and workmanship for ninety (90) days unless otherwise specified from the date of original
purchase.
ALL PURCHASES OF CLARION PRODUCTS FROM NON-AUTHORIZED CLARION DEALERS ARE SUBJECT
TO FURTHER WARRANTY RESTRICTIONS AS DESCRIBED BELOW.
The conditions of this Limited Warranty and the extent of responsibility of Clarion Corporation of America ( .. Clarion .. )
under this Limited Warranty are as follows :
1. PROOF OF DATE OF PURCHASE FROM AN AUTHORIZED CLARION DEALER WILL BE REQUIRED FOR
WARRANTY SERVICE OF THIS PRODUCT. CENTERS MAY BE OBTAINED BY CONTACTING CLARION AT
THE ADDRESS LISTED BELOW.
2. This Limited Warranty will become void if service performed by anyone other than an approved Clarion Warranty
Service Center results in damage to the product.
3. This Limited Warranty does not apply to any product which has been subject to misuse, neglect or accident,
or which has had the serial number altered, defaced or removed, or which has been connected, installed,
adjusted or repaired, other than in accordance with the instructions furnished by Clarion.
4. This Limited Warranty does not cover car static or other electrical interferences, tape head or laser pick-up
cleaning or adjustments, or labor costs for the removal or reinstallation of the unit for repair.
5. The sole responsibility of Clarion under this Limited Warranty shall be limited to the repair of the product or
replacement of the product, at the sole discretion of Clarion.
6. Product must be shipped in its original carton or equivalent carton, fully insured, with shipping charges prepaid.
Clarion will not assume any responsibility for any loss or damage incurred in shipping.
7. CLARION PRODUCTS PURCHASED FROM A SOURCE OTHER THAN AN AUTHORIZED CLARION DEALER,
INCLUDING ANY AND ALL PURCHASES VIA THE INTERNET FROM A NON INTERNET AUTHORIZED
CLARION DEALER, SHALL NOT BE COVERED BY ANY CLARION LIMITED WARRANTY TO THE EXTENT
ALLOWED BY APPLICABLE LAW. IN THE EVENT AND TO THE EXTENT APPLICABLE LAW PROHIBITS
ELIMINATION OF WARRANTIES UNDER THESE CIRCUMSTANCES, THE APPLICABLE LIMITED WARRANTY
PERIOD SHALL BE DEEMED TO BE FIFTEEN (15) DAYS FROM THE DATE OF ORIGINAL PURCHASE.
8. ALL IMPLIED WARRANTIES EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW SHALL HAVE NO
GREATER DURATION THAN THE WARRANTY PERIOD SET FORTH ABOVE. UNDER NO CIRCUMSTANCES
SHALL CLARION BE LIABLE FOR ANY LOSS OR DAMAGE, DIRECT OR CONSEQUENTIAL, ARISING OUT OF
THE USE OR INABILITY TO USE THE PRODUCT. BECAUSE SOME STATES DO NOT ALLOW LIMITATIONS
ON HOW LONG AN IMPLIED WARRANTY LASTS OR EXCLUSIONS OR LIMITATIONS OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.
9. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS WHICH VARY FROM STATE TO STATE.
1 0. The laws of the State of California shall govern and control this Limited Warranty, its interpretation and enforcement.
11. Should you have any difficulties with the performance of this product during the warranty period, please call
Clarion or visit our web site for a listing of Authorized Warranty Service Centers in your area. You may also contact
Clarion Customer Service at the address listed below for any service help you may need with Clarion products.
In USA:
Clarion Corporation of America
Attn:Customer Service Manager
6200 Gateway Drive
Cypress, CA 90630
1-800-GO-CLARION
www.clarion.com
In Canada:
Clarion Canada Inc.
Warranty Service Center
2239 Winston Park Drive
Oakville, Ontario L6H 5R1
(905) 829-4600
www.clarion.com