Bluetooth® Wireless Speaker System
Français
Système de haut-parleurs sans fil BluetoothMD
MANUEL DE L’UTILISATEUR / INSTRUCTIONS DE SÉCURITÉ / INFORMATIONS SUR LA CONFORMITÉ
Español
Sistema de altavoces inalámbricos por Bluetooth®
MANUAL DEL PROPIETARIO/INSTRUCCIONES DE SEGURIDAD /INFORMACIÓN DE CUMPLIMIENTO
OWNER’S MANUAL / SAFETY INSTRUCTIONS / COMPLIANCE INFORMATION
MC100 Blue
E
N
G
L
I
S
H
FCC Information (For US customers)
IC Information (For Canadian customers)
1. COMPLIANCE INFORMATION
This equipment complies with Part 15 of the FCC Rules.
Operation is subject to the two following conditions:
(1) this product may not cause harmful interference, and
(2) this product must accept any interference received,
including interference that may cause undesired operation.
1. PRODUCT
This product contains IC 8819A-MC100BLUE.
This Class B digital apparatus complies with Canadian
ICES-003.
FCCID:XN6-MC100BLUE
Boston Acoustics
7 Constitution Way, Woburn, MA 01801 USA
Tel. 978-538-5000
2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements.
Modification not expressly approved by Boston Acoustics
may void your authority, granted by the FCC, to use the
product.
3. CAUTION
t 5PDPNQMZXJUI'$$3'FYQPTVSFDPNQMJBODF
requirement, separation distance of at least 20 cm must
be maintained between the antenna of this product and
all persons.
t 5IJTQSPEVDUBOEJUTBOUFOOBNVTUOPUCFDPMPDBUFE
or operating in conjunction with any other antenna or
transmitter.
4. NOTE
This product has been tested and found to comply with the
limits for a class B digital device, pursuant to Part 15 of the
FCC Rules. The limits are designed to provide reasonable
protection against harmful interference in a residential
installation.
This product generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment OFF and ON, the user
is encouraged to try to correct the interference by one or
more of the following measures:
t 3FPSJFOUPSSFMPDBUFUIFSFDFJWJOHBOUFOOB
t *ODSFBTFUIFTFQBSBUJPOCFUXFFOUIFFRVJQNFOUBOE
receiver.
t $POOFDUUIFFRVJQNFOUUPBOPVUMFUPOBDJSDVJU
different from that to which the receiver is connected.
t $POTVMUUIFEFBMFSPSBOFYQFSJFODFESBEJPPSUFMFWJTJPO
technician for help.
Designed in USA
Made in China
Boston Acoustics, Inc., USA
2
2. CAUTION
To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (e.i.r.p.) is not more
than that permitted for successful communication.
This device complies with Industry Canada licenceexempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter
may only operate using an antenna of a type and maximum
(or lesser) gain approved for the transmitter by Industry
Canada. To reduce potential radio interference to other users,
the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (e.i.r.p.) is not more
than that necessary for successful communication.
Conformément à la réglementation d’Industrie Canada, le
présent émetteur radio peut fonctionner avec une antenne
d’un type et d’un gain maximal (ou inférieur) approuvé pour
l’émetteur par Industrie Canada. Dans le but de réduire les
risques de brouillage radioélectrique à l’intention des autres
utilisateurs, il faut choisir le type d’antenne et son gain de
sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.)
ne dépasse pas l’intensité nécessaire à l’établissement d’une
communication satisfaisante.
Le présent appareil est conforme aux CNR d’Industrie
Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.
Informations sur IC (pour les clients canadiens)
1. APPAREIL
Cet appareil contiens IC 8819A-MC100BLUE.
Cet appareil numérique de las classe B est conforme à la
norme NMB-003 du Canada.
2. ATTENTION
Afin de réduire le risque d´interférence aux autres utilisateurs,
il faut choisir le type d´antenne et son gain de façon à ce
que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne
soit pas supérieure au niveau requis pour l´obtention d´une
communication satisfaisante.
E
N
G
L
I
S
H
This symbol found on the apparatus indicates hazards
arising from dangerous voltages.
This symbol found on the apparatus indicates the user
should read all safety statements found in the user manual.
This symbol found on the apparatus indicates
double insulation.
Warning!
24. Warning: To reduce the risk of electric shock, do not remove cover
(or back) as there are no user-serviceable parts inside. Refer
servicing to qualified personnel.
25. Observe and follow local regulations regarding battery disposal.
Do not keep the battery in a place exposed to direct sunlight or
in places with extremely high temperatures, such as near a heater.
To reduce the risk of fire or electrical shock, do not
expose this apparatus to rain or moisture.
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the
other. A grounding-type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your
safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for
long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
14. Maintain a minimum distance of 2" (50mm) around the front, rear,
and sides of the apparatus for sufficient ventilation. The ventilation
should not be impeded by covering the ventilation openings or
placing on or around the apparatus items such as newspapers,
table-cloths, curtains, etc.
15. No open flame sources, such as lighted candles, should be
placed on the apparatus.
16. The apparatus shall not be exposed to dripping or splashing.
No objects filled with liquids, such as vases, shall be placed on
the apparatus.
17. Either the power inlet connector on the rear of the apparatus or
the power plug at the wall must remain accessible, to be able to
disconnect power from the apparatus.
18. To completely disconnect this apparatus from the AC Mains,
disconnect the power supply cord plug from the AC receptacle.
19. Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart or rack
is used, use caution when moving the
cart/apparatus combination to avoid injury
from tip-over.
20. CAUTION: These servicing instructions are for use by qualified
service personnel only. To reduce the risk of electric shock, do not
perform any servicing other than that contained in the operating
instructions unless you are qualified to do so.
21. WARNING: Only use attachments/accessories specified or
provided by the manufacturer
22. WARNING: Please refer the information on exterior bottom
enclosure for electrical and safety information before installing
or operating the apparatus.
23. When not in use and during movement, please take care of the
power cordset, e.g. tie up the power cordset with cable tie or
something like that. It shall be free from sharp edges that can
cause abrasion of the power cordset. When put into
use again, please make sure the power cordset is not damaged,
If any damage is found, please contact customer service and
replace the power cordset.
WARNING:
DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD
‡7KHUHPRWHFRQWUROVXSSOLHGZLWKWKLVSURGXFWFRQWDLQVDFRLQ
button cell battery. If the coin/button cell battery is swallowed, it
can cause internal burns in just 2 hours and can lead to death.
‡.HHSQHZDQGXVHGEDWWHULHVDZD\IURPFKLOGUHQ,IWKHEDWWery
compartment does not close securely, stop using the product
and keep it away from children. If you think batteries might have
been swallowed or placed inside any part of the body, seek
immediate Medical attention.
‡2EVHUYHDQGIROORZORFDOUHJXODWLRQVUHJDUGLQJEDWWHU\GLVSRsal.
‡'RQRWNHHSWKHEDWWHU\LQDSODFHH[SRVHGWRGLUHFWVXQOLJKW or
in places with extremely high temperatures, such as near a heater.
American Users:
Note:This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution: Unauthorized changes or modifications to the receiver could
void the user s authority to operate the equipment.
Canadian Users:
This class B digital apparatus complies with CAN ICES-3(B). Cet appareil
numérique de classe B est conforme á la norme NMB-3(B) du Canada.
FCC Radiation Exposure Statement
1)This equipment complies with FCC RF radiation exposure limits set forth for
an uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter. This equipment
should be installed and operated with a minimum distance of 20 centimeters
between the radiator and your body.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
2)the IC statement of the user manual is not correct, attached the correct IC
statement for your reference. please update the user manual.
Canada
The device meets the exemption from the routine evaluation limits in section
2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain
Canadian information on RF exposure and compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la
section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf,
utilisateurs peut obtenir l'information canadienne sur l'exposition et la
conformité de rf.
3
E
N
G
L
I
S
H
Introduction
Thank you for choosing Boston Acoustics® and congratulations on your purchase of the MC100 Blue
wireless speaker system. The MC100 Blue is a self-amplified stereo speaker system that uses Bluetooth®
wireless communication to receive a signal from any standard Bluetooth equipped device capable of
stereo audio transmission (A2DP).
Using the simple controls on the MC100 Blue, and its remote control, you can adjust the volume of the
system or operate the basic music play back functions of your connected devices. An auxiliary analog
input also allows you to connect any music source that has a standard 3.5mm connector to the MC100
Blue. We hope you’ll enjoy it for years to come.
Features
t 0VUTUBOEJOHTUFSFPQFSGPSNBODFGSPNEVBMIJHIQFSGPSNBODF#PTUPOEFTJHOFE›JODITQFBLFST
in separate acoustic chambers, vented for extended bass response
t #MVFUPPUIXJSFMFTTTUSFBNJOHGSPNBOZDPNQBUJCMF#MVFUPPUINVTJDQMBZFSQIPOFUBCMFUPS
computer
t 5BQUPQBJSGVODUJPOBMJUZGPSJOTUBOUDPOOFDUJPOXJUIBOZEFWJDFUIBUTVQQPSUT/FBS'JFME
Communication (NFC)
t "QU9DPEFDGPS$%MJLFTPVOERVBMJUZPWFS#MVFUPPUI
t "VYJMJBSZJOQVU
t #BTT5SBD¥BVEJPQSPDFTTJOHGPSTBUJTGZJOHCBTTBUBOZWPMVNF
t &BTZUPVTFDPOUSPMT
t 7PMVNFMFWFMEJTQMBZCFIJOEHSJMMF
t 3FNPUFDPOUSPMXJUINVTJDQMBZCBDLDPOUSPMT
t )FBEQIPOFPVUQVU
t &MFHBOUTUZMJOHXJUICFBVUJGVMIJHIHMPTTmOJTI
Unpacking and Setting Up Your MC100 Blue
Carefully unpack the system. If there is any sign of damage from transit, report it immediately to your
dealer and/or delivery service. Keep the shipping carton and packing materials for future use. Be sure to
keep your purchase receipt in a safe place, as it may be required for warranty purposes.
In the carton you should find the MC100Blue, remote control, power supply and a power plug adapter.
Placement
Your MC100 Blue will sound great just about anywhere. If you put it near a wall or corner the bass
response will be enhanced. Blocking the bass ports on the rear of the cabinet will reduce bass response.
4
E
N
G
L
I
S
H
Power Connection
Attach the power plug adapter plate to the power supply. Plug the power supply into the wall power
outlet. Connect the other cable from the power supply to the power input on the back of the unit.
Service Connector
The service port is used for
software updates only.
Reset Button
Returns the MC100 Blue settings
to the defaults values.
Controls
/
/
/
power – There are three power states.
on - the button is lit blue. The system is
powered up.
standby – button is lit red. The system is
powered down, but will automatically turn
on when a new audio signal appears from
a connected device.
off – button is not lit. The system is
powered down completely and will not
respond to audio signals.
Power Button
Bluetooth® Input Button
Aux Input Button
Mute Button
Volume Up/Down
Bluetoo
A quick press of the button will toggle between
on and standby states. Press and hold the
button to turn the system off.
V
A
So
Bluetooth input – Press to select the Bluetooth wireless input. The button blinks rapidly when
pairing and stays lit when the system is connected to a Bluetooth device. See the “Bluetooth Details”
section of this manual for more information.
auxiliary input – press to select the auxiliary input. The top button lights when the auxiliary input is
selected.
muting – to mute the sound or restore it to the previous volume level. When the sound is muted,
the button is lit.
volume down – press to reduce volume.
volume up – press to increase volume.
5
E
N
G
L
I
S
H
Volume Display
There is a 10-segment volume display on the front behind the
grille. The display lights blue when volume adjustments are
made. After a few seconds the display turns off. When the system
receives a signal from the remote control, the bottom LED flickers.
Remote Control
The remote control has the same buttons as are on the top of the
system, with the addition of playback control buttons that let you
control your compatible Bluetooth devices:
Bluetooth® Input Button
Power Button
Volume Up/Down
/,
.
{
}
Aux Input Button
Play /Pause
Stop
Skip back / fast reverse
Skip forward / fast forward
Mute Button
Song Play Controls
Notes About the Remote
When you unpack your remote control there will be a plastic tab extending from the battery
compartment. This keeps the battery from being depleted. Pull out this tab before using the remote
control. Eventually you’ll need to replace the remote battery. When the battery is depleted, the remote
XPOUSFMJBCMZPQFSBUFUIF.$#MVF:PVXJMMOFFEUPSFQMBDFJUXJUIBOFX$37MJUIJVNDPJO
type battery, available at many retailers.
When using the remote you should be able to see the MC100 Blue. Point the remote control at the front
panel of the system when pressing the buttons. If the MC100 Blue does not respond to the remote, try
moving closer to the system. Operating range is specified to be 15 feet, ±30°.
Bluetooth Details
Getting Started – Pairing
Before you can stream Bluetooth audio to your MC100 Blue, you have to pair it to your device.
To pair the MC100 Blue to a device for the first time:
1. Go to Bluetooth settings on your device. Make sure
the device’s Bluetooth feature is set to “on”.
SETTINGS
Bluetooth: ON
SETTINGS
Bluetooth: ON
2. Turn on the MC100 Blue by pressing the
button.
The button will light solid blue. The button will
begin to flash, indicating that the system is searching
for a device with which to pair.
6
SETTINGS
Bluetooth: ON
E
N
G
L
I
S
H
3. The MC100 Blue has two ways to initiate pairing:
NFC (Near Field Communication) or “tap-topair”. The newest and easiest pairing method.
If you have an
NFC enabled
device, simply
place it gently
on the top of
the MC100 Blue.
Your phone or
tablet does the
rest, and you can
be playing audio
within seconds.
Press and hold the button on the top of the
MC100 Blue, or on the remote, for 3 seconds.
The button on the top will begin to flash
blue, indicating that the system is looking for
your device.
3
seconds
3
seconds
Look at the Bluetooth list on your device. You
may have to select “search for devices” for a new
device to appear in the list of available devices.
Once “Boston MC100Blue“ appears in that list,
simply select to pair.
When the
button on top lights solid blue, you are ready to go! Fire up your music and enjoy!
Once the MC100 Blue is paired to a device, its Bluetooth address is stored in a ‘Paired List’ so it can hook
up to that device easily in the future. The MC100 Blue is capable of storing up to 8 different devices.
Once that limit is exceeded, the oldest device is cleared so that a new one can be stored.
After the first pairing, the MC100 Blue will automatically connect to your device when it is in range. The
button on top of the MC100 Blue will light solid blue to indicate the system is ready to stream music from
your connected device. If a song is already playing through the device, the MC100 Blue will start playing.
Note: If the Bluetooth button is lit, but nothing is heard:
1 Check the device to make sure a selection is playing. Make sure your music is not paused.
2 Check the device and the MC100 Blue to make sure their volume levels are up and MUTE is not
enabled on either of them.
The MC100 Blue will stay in pairing mode for up to 5 minutes, searching for a Bluetooth device (which
must also be in pairing mode). If it does not find a device, the Bluetooth button will light red to indicate
that it was not able to pair. To try pairing again, press and release the RESET button on the back of the
MC100 Blue. The button will begin to flash, indicating that the system is searching for a device with
which to pair. If you are still having trouble, try moving the device closer to the MC100 Blue and repeat
the pairing process.
7
E
N
G
L
I
S
H
Connecting Headphones
Connect the headphone plug to the 3.5mm jack beside the symbol. This turns off the MC100 Blue
internal speakers. If your headphones have a larger 1/4-inch plug you will need an adapter, available at
many retailers.
Auxiliary Input
Press the
button on the top or on the remote control. The
the top will light blue.
button on
The MC100 Blue can accept an analog signal from a wide range of sources—
from CD players to MP3 players, and even older legacy devices. You’ll need
a cable with a standard 3.5mm stereo mini plug to connect between the
source and the auxiliary input on the left side of the system.
Note: The analog output signals from some sources can be fairly strong. If the volume level of the
source device is turned up too high, it could overload the inputs of the MC100 Blue. This is unlikely to
cause damage, but can cause distorted sound. Initially, set the volume of the source to a medium – low
level, then turn it up as needed. If you hear distortion, turn down the device’s volume control.
Wall Mounting the MC100 Blue
The MC100 Blue can be wall mounted using the
keyhole openings on the back of the system.
Install two M5 or equivalent screws in the wall.
They must be exactly 315/16” (100mm) apart, and
level with each other. Leave about 3/16” (5mm)
of the screw shaft exposed so the head of the
screw can engage the keyhole opening. Carefully
position the MC100 Blue keyhole openings over
the screw head and set it in place. Be sure the
cabinet is firmly mounted on the screw heads
before you let go of the system.
8
315/16 in
(100mm)
E
N
G
L
I
S
H
Limited Warranty
Boston Acoustics warrants to the original purchaser of the MC100 Blue that it will be free of defects in
materials and workmanship in its mechanical parts for a period of one year from the date of purchase.
Your responsibilities are to install and use the MC100 Blue according to the instructions supplied, to
provide safe and secure transportation to an authorized Boston Acoustics service representative, and to
present proof of purchase in the form of your sales slip when requesting service.
Excluded from this warranty is damage that results from abuse, misuse, improper installation, accidents,
shipping, or repairs/modifications by anyone other than an authorized Boston Acoustics service
representative.
This warranty is limited to the Boston Acoustics product and does not cover damage to any associated
equipment. This warranty does not cover the cost of removal or reinstallation. This warranty is void if the
serial number has been removed or defaced. This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
If Service Seems Necessary
First, contact the dealer from whom you purchased the product. If that is not possible, contact us
by e-mail at
support@bostona.com
by phone at
(877) 924-5817
Or you may write to us at
Boston Acoustics, Inc.
100 Corporate Drive
Mahwah, NJ 07430 USA
We will promptly advise you of what action to take. If it is necessary to send your MC100 Blue to an
authorized service center, please ship it prepaid. After it has been repaired, we will return it freight
prepaid in the United States and Canada.
9
Register your product online @ BostonAcoustics.com
bostonacoustics.com
Boston, Boston Acoustics, BassTrac and the Boston Acoustics logo are registered trademarks of Boston Acoustics, Inc.
Specifications are subject to change without notice. © 2013 Boston Acoustics, Inc.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks
by Boston Acoustics is under license. Other trademarks and trade names are those of their respective owners.
142-004362-1
Printed in China
MC100 Blue
Quick Start Guide
Remove contents of box.
Bluetooth® Wireless Speaker System
Français
Système de haut-parleurs sans fil BluetoothMD
MANUEL DE L’UTILISATEUR / INSTRUCTIONS DE SÉCURITÉ / INFORMATIONS SUR LA CONFORMITÉ
OWNER’S MANUAL / SAFETY INSTRUCTIONS / COMPLIANCE INFORMATION
MC100Blue
AC power supply
Español
Sistema de altavoces inalámbricos por Bluetooth®
MANUAL DEL PROPIETARIO/INSTRUCCIONES DE SEGURIDAD /INFORMACIÓN DE CUMPLIMIENTO
Quick Start Guide
Owner’s Manual
Remote Control
MC100 Blue speaker
1 Locate the MC100 Blue near an AC
power source and connect.
Press the
button.
2 Enable Bluetooth® on your mobile device.
If necessary, refer to the owner’s manual of your mobile device.
SETTINGS
Bluetooth: ON
SETTINGS
Bluetooth: ON
SETTINGS
Bluetooth: ON
3a Pair your mobile device to the MC100 Blue. Press and
hold the button for three seconds to launch the
pairing process (button flashes rapidly).
Select “Boston MC100Blue” on the Bluetooth screen
of your mobile device.
When the button stops flashing, your mobile device is connected and you can
begin streaming audio.
OR,
3b If you have an NFC enabled device, simply place it gently on the top of the
MC100 Blue. Your phone or tablet does the rest, and you can be playing audio
within seconds.
bostonacoustics.com
MC100 Blue
Quick Start Guide
Guide de démarrage rapide / Guía de Inicio Rápido
1 Branchez l’alimentation à une
priseélectrique murale. Branchez.
Appuyez
bouton.
2 Activez la fonction Bluetooth® sur votre
appareil mobile
Si nécessaire, reportez-vous au manuel du propriétaire
de votre appareil mobile.
SETTINGS
Bluetooth: ON
SETTINGS
Bluetooth: ON
SETTINGS
Bluetooth: ON
3a Appuyez et maintenez enfoncé le bouton sur
le dessus du système ou de la télécommande. Le
bouton clignote pendant le jumelage.
Le bouton du haut reste allumé pendant que le
système est connecté à un appareil Bluetooth.
Une fois que vous voyez s’afficher “Boston
MC100Blue” dans cette liste, sélectionnez
simplement celui-ci pour commencer le jumelage.
Lorsque le bouton sur le dessus s’allume en bleu,
vous êtes prêt à utiliser le système!
Or,
3b Si vous avez un appareil qui est compatible
avec la NFC, appuyez simplement sur est
compatible avec la NFC, appuyez simplement
sur le dessus du MC100Blue. Votre téléphone
ou tablette fera le reste et vous pourrez lire
des fichiers audio presque instantanément.
1 Conecte la fuente de alimentación al
enchufe de alimentación eléctrica de
la pared.
Pulse
botón.
2 Activar Bluetooth® en su dispositivo móvil.
SETTINGS
Bluetooth: ON
SETTINGS
Bluetooth: ON
Si es necesario, consulte el manual del usuario de su dispositivo
móvil.
SETTINGS
Bluetooth: ON
3a Presione para seleccionar la entrada inalámbrica de
Bluetooth. El botón parpadea mientras empareja.
El botón de arriba se queda encendido cuando el
sistema está conectado a un dispositivo Bluetooth.
Presione y sostenga el botón de la parte superior o
sobre el remoto durante 3 segundos.
Una vez que aparezca “Boston MC100Blue” en esa
lista, simplemente selecciónelo para emparejar.
Cuando el botón de la parte superior se encienda
en azul sólido, ¡estará listo!
Or,
3b Si usted tiene un dispositivo con
NFC habilitado, simplemente pulse
ligeramente sobre la parte superior del
MC100Blue. Su teléfono o tablet harán el
resto, usted podrá estar reproduciendo
audio en cuestión de segundos.
bostonacoustics.com
Boston and Boston Acoustics are registered trademarks of
Boston Acoustics, Inc.
Specifications are subject to change without notice.
© 2013 Boston Acoustics, Inc.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc.
Other trademarks and trade names are those of their
respective owners.
142-004364-2
Printed in China
Bluetooth® Wireless Speaker System
MC1 OOBiue
English
Troubleshooting note for iPhone4S users:
Apple iPhone 4S running iOS 6 firmware has momentary audio dropouts that occur during playback when the Wi-Fi and Bluetooth
are both set to ON. Because this issue is related to a specific version of Apple iPhone and firmware we recommend updating your
firmware to iOS 7 and/or setting Wi-Fi to OFF when streaming audio to Bluetooth devices.
If you require further assistance, please contact our Customer Support team at 877-924-5817 Monday through Friday from 9AM to 8PM EST.
Fran~ais
Depannage Note pour les utilisateurs iPhone4S:
Apple iPhone 4S iOS 6 firmware a decrochages audio momentanees qui se produisent pendant Ia lecture lorsque Ia connexion Wi-Fi
a une version specifique de l'iPhone d'Apple et le firmware,
nous recommandons Ia mise ajour de votre firmware iOS a7 et I ou Ia mise en Wi-Fi aOFF lors du streaming audio ades peripheriques Bluetooth.
et Bluetooth sont tous deux regles sur ON. Parce que cette question est liee
Si vous avez besoin d'aide, s'il vous plait contacter notre equipe de soutien aIa clientele au 877-924-5817 du lundi au vendredi 9am- 8pm.
Espanol
Soluci6n de problemas de nota para los usuarios de iPhone4S:
IPhone 45 de Apple con iOS 6 firmware tiene perdidas de sonido momentaneos que ocurren durante Ia reproducci6n cuando el Wi-Fi
y Bluetooth se establecen en ON. Debido a que este problema esta relacionado con una version especffica del iPhone y el firmware de Apple
le recomendamos actualizar su firmware para iOS 7 y I o Ia creaci6n de Wi-Fi en OFF cuando el streaming de audio a dispositivos Bluetooth.
Si necesita mas ayuda, p6ngase en contacto con nuestro equipo de Atenci6n al Cliente al877-924-5817 de lunes a viernes de 9 a 8 PM.
Boston Acoustics, Inc.
Printed in China 5431 1031 200AD