DGS-1100 Series Firmware Release Notes
DGS-1100-05 Firmware Version: 1.10.002
DGS-1100-05 PROM Code Version: 1.0.4
DGS-1100-08 Firmware Version:: 1.10.011
DGS-1100-08 PROM Code Version:: 1.0.11
DGS-1100-08P Firmware Version: 1.10.004
DGS-1100-08P PROM Code Version: 1.0.1
DGS-1100-16/24 Firmware Version:: 1.10.011
DGS-1100-16/24 PROM Code Version: 1.0.2
Published: Mar. 27, 2013
These release notes include important information about D-Link switch firmware revisions. Please
verify that these release notes are correct for your switch:
-
If you are installing a new switch, please check the hardware version on the device label;
make sure that your switch meets the system requirement of this firmware version. Please
refer to Revision History and System Requirement for detailed firmware and hardware
matrix.
-
If the switch is powered on, you can check the hardware version by checking the device
information page on the web graphic user interface.
-
If you plan to upgrade to the new firmware release, please refer to the Upgrade Instructions
for the correct firmware upgrade procedure.
For more detailed information regarding our switch products, please refer to Related
Documentation.
You can also download the switch firmware and technical documentation from
http://tsd.dlink.com.tw.
Content:
Revision History and System Requirement: ....................................................................................1
Upgrade Instructions: ............................................................................................................2
Upgrade using Web-UI ................................................................................................................................................ 2
Upgrade using SmartConsole Utility ........................................................................................................................... 3
New Features: ....................................................................................................................6
Changes: ..........................................................................................................................6
Problem Fixed: ...................................................................................................................7
Known Issues: ....................................................................................................................8
Related Documentation: ...................................................................................................... 10
Revision History and System Requirement:
Firmware Version
Runtime: V1.10.004
PROM: 1.0.1
Date
Model
27-Mar-2013 DGS-1100-08P
1
Hardware Version
A1
DGS-1100 Series Firmware Release Notes
Runtime: V1.10.011
PROM: 1.0.11
DGS-1100-08
A1
Runtime: V1.10.011
PROM: 1.0.2
DGS-1100-16
DGS-1100-24
A1
Runtime:V1.10.002
PROM:1.0.4
DGS-1100-05
A1
DGS-1100-08
A1
Runtime:V1.10.008
PROM:1.0.2
DGS-1100-16
DGS-1100-24
A1
Runtime:V1.10.005
PROM:1.0.2
DGS-1100-16
DGS-1100-24
A1
DGS-1100-16
DGS-1100-24
A1
DGS-1100-08
A1
DGS-1100-16
DGS-1100-24
A1
Runtime:V1.10.007
PROM:1.0.11
Runtime:V1.00.012
PROM:1.0.2
4-Oct-2012
2-Jun-2012
Runtime:V1.10.002
PROM:1.0.8
v1.00.009
27-Dec-2010
Upgrade Instructions:
You can download the firmware from D-Link web site http://tsd.dlink.com.tw, and upgrade
through web UI or SmartConsole Utility.
Upgrade using Web-UI
1. Connect a workstation installed with java SE runtime environment to any switch port of the
device.
2.
Open the web browser from the workstation and enter the IP address of the switch. The
switch’s default IP address is 10.90.90.90.
3.
Enter administrator’s password when prompted. The password is admin by default.
4.
To update switch's firmware or configuration file, select Tools > Firmware Backup &
Upgrade from the banner.
2
DGS-1100 Series Firmware Release Notes
5.
Click Browse to browse your inventories for a saved firmware file, and then click Upgrade
after selecting the firmware file you want to restore.
6.
Wait until the “Firmware Upgrade Successful” message pops up and login again after device
boots up.
Upgrade using SmartConsole Utility
1. Connect a workstation installed with java SE runtime environment to any switch port of the
device
3
DGS-1100 Series Firmware Release Notes
2. Execute SmartConsole Utility and click the “Discovery” button to search switches.
3. Single-click on the icon of Monitor column to select the target switch.
4. Click Firmware Upgrade button
4
DGS-1100 Series Firmware Release Notes
5. Click Browse button and select the firmware file (Model name_HW ver._FW ver. .hex) on your
local hard drive.
6. Enter password and click “Upgrade” button to start firmware upgrade. The default password is
“admin”.
5
DGS-1100 Series Firmware Release Notes
7. Once the message popped up, click “OK” button to complete the firmware upgrade
New Features:
DGS-1100-05:
Firmware Version
V1.10.002
New Features
First Release
DGS-1100-08:
Firmware Version
V1.10.011
New Features
NA
V1.10.007
V1.10.002
1. SmartConsole Utility v3.0
2. Jumbo Frame
First Release
DGS-1100-08P:
Firmware Version
V1.10.004
New Features
First Release
DGS-1100-16/24:
Firmware Version
V1.10.011
New Features
NA
V1.10.008
V1.10.005
V1.00.009
1. SmartConsole Utility v3.0
1. Management VLAN
2. Voice VLAN
First Release
Changes:
DGS-1100-05:
Firmware
Changes
Version
6
DGS-1100 Series Firmware Release Notes
V1.10.002
First Release
DGS-1100-08:
Firmware
Changes
Version
Forbid to restore the configuration file from certain scenarios. For details, refer to
V1.10.011
table at “Know Issues” part.
V1.10.007
Move Menu Items "Surveillance VLAN" and "Voice VLAN" to Menu "VLAN".
V1.10.002
First Release
DGS-1100-08P:
Firmware
Changes
Version
V1.10.004
First Release
DGS-1100-16/24:
Firmware
Changes
Version
Forbid to downgrad FW to previous version. For details, refer to table at “Know
V1.10.011
Issues” part.
V1.10.008
Move Menu Items "Surveillance VLAN" and "Voice VLAN" to Menu "VLAN".
V1.10.005
or later
version
Forbid to restore the configuration file from certain scenarios. For details, refer to
table at “Know Issues” part.
V1.10.002
First Release
Problem Fixed:
DGS-1100-05:
Firmware
Problems Fixed
Version
V1.10.002
First Release
DGS-1100-08:
Firmware
Problems Fixed
Version
1. Fix the issue that IGMP group from which all members have left is not
removed (DRU20130110000002)
V1.10.011
2. Fix the issue that IGMP control packet is only processed in Management VLAN
when Management VLAN is enabled (DRU20130109000004)
V1.10.007
1. When restoring configuration via another DGS-1100-08’s configuration file,
the device S/N number and hardware version in WebGUI will be overwritten
or disappear(DI20130108000017)
V1.10.002
First Release
7
DGS-1100 Series Firmware Release Notes
DGS-1100-08P:
Firmware
Problems Fixed
Version
V1.10.004
First Release
DGS-1100-16/24:
Firmware
Problems Fixed
Version
Fix the issue that when firmware upgrades from V1.00.009 and V1.00.012.
V1.10.011
(DI20130204000009), the configuration will lost.
V1.00.012
V1.00.009
Fix the configuration lost when FW upgrades from V1.00.009 to V1.10.005.
Note: This Firmware will NOT cut in to production.
First Release
Known Issues:
Firmware Version
V1.10.005/V1.10.008
(For DGS-1100-16/24)
Issues
If V1.10.005/V1.10.008
downgrade to
V1.00.009/V1.00.012 and then
upgrade to V1.10.005/V1.10.008
again, all ports of the switch can’t
link up.
Workaround
Press on reset button and hold 3
secends at least to fatory reset
the switch.
V1.10.005
(For DGS-1100-16/24)
When firmware V1.00.009 is
upgraded to V1.10.005, the
configuration and Serial Number
will be lost.
Firmware V1.00.009 should be
upgraded to V1.00.012 first, and
then upgraded to V1.10.005.
V1.00.012 can be downloaded
from http://tsd.dlink.com.tw/
V1.10.002
(For DGS-1100-08)
When restoring configuration via
another
DGS-1100-08’s
configuration file,
the device
S/N number and hardware
version in WebGUI will be
overwritten or disappear.
Upgrade to V1.10.007
V1.00.009
(For DGS-1100-16/24)
First Release
DGS-1100-08 copy configuration and F/W upgrade/downgrade Issue:
Copy
1.10.011 or
Restore
Configuration
1.10.002
1.10.007
later
To
version
Copy From
A part of
The SN will be
Forbid to
V1.10.002
Result
configurations will be
overwritten.*
restore
factory reset.**
The SN and a part of
Forbid to
V1.10.007
Result
configurations will be Normal
restore
error.***
8
DGS-1100 Series Firmware Release Notes
V1.10.011 or
later version
Result
F/W Upgrade
or Downgrade
From
To
V1.10.002
Result
V1.10.007
Result
V1.10.011 or
later version
Result
Forbid to restore
1.10.002
Forbid to restore
Normal
1.10.011 or
later
version
1.10.007
Normal
The SN and a part of
configurations will be
error.***
The SN, HW version
and a part of
configurations will be
error.****
A part of
configurations will be
factory reset.**
Normal
Normal
Normal
Normal
Normal
Note :
* :The SN only can be recovered throught RMA(Return Material Authorization), and the value of
SN does not affect any functionality of the switch. Suggest upgrade F/W to V1.10.011 first
and then backup&restore configuration.
** :The part of configurations include System Information, Trap Settings for SmartConsole,
Surveillance VLAN and Voice Vlan will be factory reset. It should be set again by user. Suggest
upgrade F/W to V1.10.011 first and then backup&restore configuration.
*** :The SN only can be recovered throught RMA(Return Material Authorization), and the value
of SN does not affect any functionality of the switch. The part of configurations Include System
Information, Trap Settings for SmartConsole, Surveillance VLAN and Voice Vlan will be factory
reset. It should be set again by user. Suggest NOT to downgrade or backup configurations
to old F/W.
**** :The SN and HW version will be recovered after upgrade F/W to V1.10.011 or later version
but configurations need to set again. Suggest NOT to downgrade or backup configurations
to old F/W.
DGS-1100-16/24 copy configuration and F/W upgrade/downgrade Issue:
Copy
1.10.011 or
Restore
Configuration
1.00.009 1.00.012 1.10.005 1.10.008
later
To
version
Backup From
Forbid to
Forbid to
Forbid to
V1.00.009
Result
Normal
Normal
restore
restore
restore
Normal
Forbid to
restore
Forbid to
restore
Forbid to
restore
Normal
Normal
Normal
Result
Forbid to
restore
Forbid to
restore
Forbid to
restore
Normal
Normal
Normal
Result
Forbid to
restore
Forbid to
restore
Normal
Normal
Normal
V1.00.012
Result
V1.10.005
Result
V1.10.008
V1.10.011 or
later version
F/W
Upgrade or
Downgrade
To
Normal
1.00.009
1.00.012
9
1.10.005
Forbid to
restore
1.10.008
1.10.01
1 or
later
DGS-1100 Series Firmware Release Notes
From
version
V1.00.009
Result
Normal
Normal
The SN and
configuration
will be
factory
reset.*
V1.00.012
Result
Normal
Normal
Normal
The SN and
configuration will
be factory reset.*
Normal
Result
The SN and
configuration
will be factory
reset.**
Normal
Normal
Normal
Normal
V1.10.008
Result
The SN and
configuration
will be factory
reset.**
The SN and
configuratio
n will be
factory
reset.**
Normal
Normal
Normal
V1.10.011 or
later version
Result
Forbid
Forbid
Forbid
Forbid
Normal
V1.10.005
The SN and
configuration will
be factory reset.*
Normal
Note :
* : When firmware upgrade in this situation, the SN and configuration will be factory reset.
Suggest upgrade F/W to V1.10.011 or Later version directly.
** : When firmware downgrade in this situation, the SN and configuration will be factory reset.
Suggest NOT to downgrade.
Related Documentation:
-
DGS-1100 Series User Manual
DGS-1100 Series Getting Started Guide
10