HP Compaq 8710w Specifications

HP Compaq 8710p Notebook PC and
HP Compaq 8710w Mobile Workstation
Maintenance and Service Guide
© Copyright 2007, 2008 Hewlett-Packard
Development Company, L.P.
AMD, the AMD Arrow logo, and
combinations thereof, are trademarks of
Advanced Micro Devices, Inc. Bluetooth is
a trademark owned by its proprietor and
used by Hewlett-Packard Company under
license. Intel and Core are trademarks or
registered trademarks of Intel Corporation
or its subsidiaries in the United States and
other countries. Java is a US trademark of
Sun Microsystems, Inc. Microsoft,
Windows, and Windows Vista are either
trademarks or registered trademarks of
Microsoft Corporation in the United States
and/or other countries. SD Logo is a
trademark of its proprietor.
The information contained herein is subject
to change without notice. The only
warranties for HP products and services are
set forth in the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.
Third Edition: July 2008
First Edition: June 2007
Document Part Number: 453579-003
MSG revision history
Revision
Publication date
Description
A
September 2010
The part number for the T7100 1.8-GHz (2-MB L2 cache, 800-MHz FSB)
processor has been updated to 446440-001 in the following locations: Computer
major components on page 19, Sequential part number listing on page 31, and
Processor on page 77.
The 120-GB, 7200-rpm hard drive part number has been corrected to 454987-001
in the following location: Computer major components on page 19.
The AC adapters have been updated in the following locations: Miscellaneous
parts on page 29 and Sequential part number listing on page 31.
iii
iv
MSG revision history
Safety warning notice
WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not
place the computer directly on your lap or obstruct the computer air vents. Use the computer only on
a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft
surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to
contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer
and the AC adapter comply with the user-accessible surface temperature limits defined by the
International Standard for Safety of Information Technology Equipment (IEC 60950).
v
vi
Safety warning notice
Table of contents
1 Product description ........................................................................................................................................ 1
2 External component identification ................................................................................................................ 8
Display components ............................................................................................................................. 8
Top components ................................................................................................................................... 9
Buttons, switches, and fingerprint reader ............................................................................ 9
Keys ................................................................................................................................... 10
Lights ................................................................................................................................. 11
Pointing devices ................................................................................................................. 13
Front components .............................................................................................................................. 14
Left-side components ......................................................................................................................... 15
Rear component ................................................................................................................................. 16
Right-side components ....................................................................................................................... 16
Bottom components ........................................................................................................................... 17
3 Illustrated parts catalog ............................................................................................................................... 18
Serial number location ........................................................................................................................ 18
Computer major components ............................................................................................................. 19
Plastics Kit .......................................................................................................................................... 27
Cable Kit ............................................................................................................................................. 28
Mass storage devices ......................................................................................................................... 29
Miscellaneous parts ............................................................................................................................ 29
Sequential part number listing ............................................................................................................ 31
4 Removal and replacement procedures ....................................................................................................... 39
Preliminary replacement requirements ............................................................................................... 39
Tools required .................................................................................................................... 39
Service considerations ....................................................................................................... 39
Plastic parts ....................................................................................................... 39
Cables and and pointing stick connectors ......................................................... 40
Drive handling ................................................................................................... 40
Grounding guidelines ......................................................................................................... 41
Electrostatic discharge damage ........................................................................ 41
vii
Packaging and transporting guidelines ............................................. 42
Workstation guidelines ..................................................................... 42
Equipment guidelines ....................................................................... 43
Unknown user password ................................................................................................... 44
Component replacement procedures ................................................................................................. 45
Serial number .................................................................................................................... 45
Computer feet .................................................................................................................... 45
Battery ............................................................................................................................... 46
Display inverter and ambient light sensor board ................................................................ 47
Hard drive .......................................................................................................................... 50
Bluetooth module ............................................................................................................... 53
Primary memory module .................................................................................................... 54
WLAN module .................................................................................................................... 56
RTC battery ....................................................................................................................... 59
Optical drive ....................................................................................................................... 60
Keyboard ........................................................................................................................... 62
Expansion memory module ............................................................................................... 65
TouchPad .......................................................................................................................... 66
Modem module .................................................................................................................. 68
Switch cover ...................................................................................................................... 69
Power button board ........................................................................................................... 71
Fan/heat sink assembly ..................................................................................................... 72
Graphics card .................................................................................................................... 74
Heat sink ............................................................................................................................ 76
Processor ........................................................................................................................... 77
Display assembly ............................................................................................................... 79
Top cover ........................................................................................................................... 85
Speaker assembly ............................................................................................................. 87
System board ..................................................................................................................... 89
USB/audio board ............................................................................................................... 93
PC Card assembly ............................................................................................................. 94
5 Computer Setup ............................................................................................................................................ 96
Starting Computer Setup .................................................................................................................... 96
Using Computer Setup ....................................................................................................................... 97
Navigating and selecting in Computer Setup ..................................................................... 97
Restoring factory settings in Computer Setup ................................................................... 97
Computer Setup menus ..................................................................................................................... 98
File menu ........................................................................................................................... 98
Security menu .................................................................................................................... 99
Diagnostics menu .............................................................................................................. 99
System Configuration menu ............................................................................................ 100
viii
6 Specifications .............................................................................................................................................. 102
Computer specifications ................................................................................................................... 102
17.0-inch, WUXGA+WVA display specifications .............................................................................. 103
17.0-inch, WSXGA+WVA display specifications .............................................................................. 104
17.0-inch, WXGA+WVA display specifications ................................................................................ 105
Hard drive specifications .................................................................................................................. 106
DVD±RW and CD-RW Double-Layer Combo Drive specifications .................................................. 107
DVD/CD-RW Combo Drive specifications ........................................................................................ 108
DVD-ROM Drive ............................................................................................................................... 109
System DMA specifications .............................................................................................................. 110
System memory map specifications ................................................................................................. 110
System interrupt specifications ......................................................................................................... 111
System I/O address specifications ................................................................................................... 112
7 Screw listing ................................................................................................................................................ 114
Phillips PM2.0×17.0 captive screw ................................................................................................... 115
Phillips PM2.5×13.0 captive screw ................................................................................................... 116
Phillips PM3.0×4.0 screw ................................................................................................................. 117
Phillips PM2.5×5.0 captive screw ..................................................................................................... 118
Phillips PM2.0×4.0 screw ................................................................................................................. 119
Torx TM2.5×9.0 screw ..................................................................................................................... 121
Torx TM2.5×4.0 screw ..................................................................................................................... 123
Phillips PM2.5×9.0 captive screw ..................................................................................................... 126
Torx T8M2.5×7.0 screw ................................................................................................................... 127
Phillips PM2.5×7.0 screw ................................................................................................................. 129
Torx T8M2.0×10.0 captive screw ..................................................................................................... 130
Hex Metric HM5.0×10.0 standoff ...................................................................................................... 131
Phillips PM2.5×7.0 captive screw ..................................................................................................... 132
Phillips PM2.0×6.0 screw ................................................................................................................. 133
8 Backup and recovery .................................................................................................................................. 134
Backup and recovery using Windows Vista ..................................................................................... 134
Creating recovery discs ................................................................................................... 134
Backing up your information ............................................................................................ 134
When to back up ............................................................................................. 135
Backup suggestions ........................................................................................ 135
Backing up specific files or folders .................................................................. 135
Backing up the entire hard drive ..................................................................... 136
Creating recovery points ................................................................................. 137
Scheduling backups ........................................................................................ 137
Performing a recovery ..................................................................................................... 137
Performing a recovery from the recovery discs ............................................... 138
Performing a recovery from the hard drive ...................................................... 138
ix
Initiating a recovery in Windows ..................................................... 139
Initiating a recovery from the hard drive recovery partition ............. 139
Backup and recovery using Windows XP ......................................................................................... 140
Creating recovery discs ................................................................................................... 140
Backing up your information ............................................................................................ 140
When to back up ............................................................................................. 141
Backup suggestions ........................................................................................ 141
Backing up specific files or folders .................................................................. 141
Backing up the entire hard drive ..................................................................... 142
Creating recovery points ................................................................................. 143
Scheduling backups ........................................................................................ 143
Performing a recovery ..................................................................................................... 143
Performing a recovery from the recovery discs ............................................... 144
Performing a recovery from the hard drive ...................................................... 144
Initiating a recovery in Windows ..................................................... 145
Initiating a recovery from the hard drive recovery partition ............. 145
9 Connector pin assignments ....................................................................................................................... 146
1394 ................................................................................................................................................. 146
Audio-out (headphone) ..................................................................................................................... 146
Audio-in (microphone) ...................................................................................................................... 147
External monitor ............................................................................................................................... 147
HDMI ................................................................................................................................................ 148
RJ-11 (modem) ................................................................................................................................ 149
RJ-45 (network) ................................................................................................................................ 150
Universal Serial Bus ......................................................................................................................... 151
10 Power cord set requirements .................................................................................................................. 152
Requirements for all countries and regions ...................................................................................... 152
Requirements for specific countries and regions ............................................................................. 153
11 Recycling ................................................................................................................................................... 154
Battery .............................................................................................................................................. 154
Display .............................................................................................................................................. 154
Index ................................................................................................................................................................. 160
x
1
Product description
Category
Description
HP Compaq 8710w
Mobile Workstation
Product Name
HP Compaq 8710w Mobile
Workstation
√
HP Compaq 8710p Notebook PC
Processors
Chipset
Graphics
HP Compaq 8710p
Notebook PC
√
Intel® Core™ 2 Duo processors
T9500 2.6-GHz processor 6-MB L2
cache, 800-MHz FSB
√
√
T9300 2.5-GHz processor 6-MB L2
cache, 800-MHz FSB
√
√
T8300 2.4-GHz processor 3-MB L2
cache, 800-MHz FSB
√
√
T8100 2.1-GHz processor 3-MB L2
cache, 800-MHz FSB
√
√
T7800 2.5-GHz processor 4-MB L2
cache, 800-MHz FSB
√
√
T7700 2.4-GHz processor 4-MB L2
cache, 800-MHz FSB
√
√
T7500 2.2-GHz processor 4-MB L2
cache, 800-MHz FSB
√
√
T7300 2.0-GHz processor 4-MB L2
cache, 800-MHz FSB
√
√
T7250 2.0-GHz processor 2-MB L2
cache, 800-MHz FSB
√
√
T7100 1.8-GHz processor 2-MB L2
cache, 800-MHz FSB
√
√
Northbridge: Intel 965PM with iAMT
support
√
√
Southbridge: Intel ICH8M-enhanced
√
√
nVidia NB8E-GLM (G84GLM-UU)
graphics card with 512-MB graphics
subsystem memory operating at 800
MHz
√
1
Category
Description
HP Compaq 8710w
Mobile Workstation
nVidia NB8P-NVS2 (G84M-GT)
graphics card with 256-MB graphics
subsystem memory operating at 700
MHz (supports TurboCache)
Panel
Memory
2
HP Compaq 8710p
Notebook PC
√
OpenGL driver support
√
All display assemblies include 3
wireless local area network (WLAN)
antennae
√
√
17.0-inch WUXGA WVA AntiGlare
√
√
17.0-inch WSXGA+ WVA AntiGlare
√
√
17.0-inch WXGA+ AntiGlare
√
√
17.0-inch WSXGA+ Bright View
√
√
Supports privacy film
√
√
2 customer-accessible/upgradable
memory module slots
√
√
Supports dual-channel memory
√
√
Supports up to 8 GB of system RAM
√
√
PC2-5300, 667-MHz, DDR2
√
√
Chapter 1 Product description
Category
Hard drives
Description
HP Compaq 8710w
Mobile Workstation
HP Compaq 8710p
Notebook PC
Supports the following configurations:
√
√
Supports 9.5-mm, 2.5-inch hard drives
√
√
Customer-accessible
√
√
Serial ATA
√
√
Supports the following drives:
√
√
●
8192-MB total system memory
(4096 × 2, dual-channel)
●
6144-MB total system memory
(4096 + 2048)
●
5120-MB total system memory
(4096 + 1024)
●
4608-MB total system memory
(4096 + 512)
●
4096-MB total system memory
(2048 × 2, dual channel
●
4096-MB total system memory
(4096 × 1)
●
3072-MB total system memory
(2048 + 1024)
●
2560-MB total system memory
(2048 + 512)
●
2048-MB total system memory
(1024 × 2, dual-channel)
●
2048-MB total system memory
(2048 × 1)
●
1536-MB total system memory
(1024 + 512)
●
1024-MB total system memory
(512 × 2, dual-channel)
●
1024-MB total system memory
(1024 × 1)
●
512-MB total system memory
(512 × 1)
●
250-GB, 5400-rpm
●
200-GB, 7200--rpm
●
160-GB, 7200- and 5400-rpm
●
120-GB, 7200- and 5400-rpm
●
100-GB, 7200-rpm
●
80-GB, 7200- and 5400-rpm
3
Category
Description
HP Compaq 8710w
Mobile Workstation
HP Compaq 8710p
Notebook PC
HP 3D DriveGuard
√
√
Fixed (removal of 1 screw required)
√
√
Customer-accessible
√
√
Parallel ATA
√
√
12.7-mm tray load
√
√
Supports the following drives:
√
√
Supports external USB diskette drive
only
√
√
Supports boot from external USB
diskette drive
√
√
Supports 3-mode diskette drive
√
√
Microphone
Integrated microphone
√
√
Audio
HD audio - ADI1981
√
√
Modem
56K V.92 1.5-inch data/fax modem with
digital line guard
√
√
HD audio interface
√
√
Modem cable included in Brazil, the
Czech Republic, Europe, France,
Greece, Hungary, Israel, Latin
America, Poland, Russia, Saudi
Arabia, Slovakia, Slovenia, South
Africa, Turkey, and the United Kingdom
√
√
Intel 82566MM 10/100/1000 network
interface card (NIC) with iAMT
√
√
S3/S4/S5 wake on LAN: DC - no
√
√
S3/S4/S5 wake on LAN: AC - yes
√
√
NIC power-down technology
√
√
Optical drives
Diskette drive
Ethernet
Wireless
4
●
DVD±RW and CD-RW Super
Multi Double-Layer Combo Drive
with LightScribe
●
DVD±RW and CD-RW Super
Multi Double-Layer Combo Drive
●
DVD-CD/RW Combo Drive
●
Blu-Ray DVD-RW Combo Drive
●
DVD-ROM Drive
Integrated WLAN options by way of wireless module:
Three WLAN antennae built into
display assembly
√
√
Support for no-WLAN option
√
√
Chapter 1 Product description
Category
Description
HP Compaq 8710w
Mobile Workstation
HP Compaq 8710p
Notebook PC
Support for the following WLAN
formats:
√
√
●
Intel 802.11a/b/g/n with iAMT
support
●
Broadcom 802.11a/b/g
●
Intel 802.11a/b/g with iAMT
support
●
Broadcom 802.11b/g
Integrated personal area network (PAN) options by way of Bluetooth® module:
Support for no-WPAN option
√
√
Broadcom Bluetooth
√
√
One Type I/II PC Card slot, supporting
16-bit and 32-bit (Cardbus) PC Card
modules
√
√
Media Card Reader slot supporting SD,
MMC, MS, MSP, xD, and Memory Stick
Duo
√
√
Audio-in (mono microphone)
√
√
Audio-out (stereo headphone)
√
√
High-Definition Multimedia Interface
(HDMI)
√
√
RJ-11 (modem)
√
√
RJ-45 (Ethernet, includes link and
activity lights)
√
√
USB (6)
√
√
VGA (Dsub 15-pin) supporting 1600 ×
1200 external resolution at 75-GHz
(hot plug/unplug with auto-detect)
√
√
3-pin AC power
√
√
Docking
HP 3-in-1 NAS Docking Station, HP
Advanced Docking Station, and HP
Docking Station
√
√
Keyboard/pointing
devices
14.4-inch keyboard with separate
numeric keypad
√
√
Dual point (pointing stick and
TouchPad) with 3 pointing stick buttons
and 3 TouchPad buttons and vertical
scrolling (taps enabled as default)
√
√
External media
card
Ports
TouchPad only, with 2 TouchPad
buttons and vertical scrolling (taps
enabled as default)
Windows Vista™ Hardware Start
Button
√
√
√
5
Category
Description
HP Compaq 8710w
Mobile Workstation
HP Compaq 8710p
Notebook PC
Power
requirements
The following AC adapters with
localized cable plug support (3-wire
plug with ground pin, supports 3-pin
DC connector):
√
√
8-cell, 2.55-Ah (73-Wh) Li-ion battery
√
√
Support for 8-cell Extended Life Battery
√
√
Support for 12-cell Ultra Capacity
Battery
√
√
Full volume encryption
√
√
Integrated fingerprint reader
√
√
Integrated smart card reader
√
√
Preboot authentication (password,
smart card)
√
√
Security cable slot
√
√
Trusted platform module (TPM) V.1.2
√
√
Windows Vista Business 32/64
√
√
Windows Vista Home Basic 32
√
√
Windows® XP Professional
√
√
FreeDOS
√
√
√
√
Security
Operating
system
●
180-W PFC AC adapter
●
135-W PFC AC adapter
●
120-W non-PFC and PFC AC
adapters
●
90-W non-PFC and PFC AC
adapters
Preinstalled:
Preinstalled with Microsoft® Office:
Windows Vista Business 32/64 with
Office 2007 Ready
√
Windows Vista Business 32/64 with
Office 2007 Personal
Windows XP Professional with Office
2007 Ready
√
√
Windows XP Professional with Office
2007 Personal
√
√
Windows Vista Business 32/64
√
√
Windows Vista Home Basic 32
√
√
Restore media:
6
Chapter 1 Product description
Category
Description
HP Compaq 8710w
Mobile Workstation
HP Compaq 8710p
Notebook PC
Windows XP Professional
√
√
DRDVD XP
√
√
DRDVD Vista
√
√
√
√
√
√
AC adapter
√
√
Battery (system)
√
√
Battery (RTC)
√
√
Hard drive
√
√
Memory module
√
√
Modem module
√
√
Optical drive
√
√
WLAN module
√
√
Supported:
Windows® 2000
Certified:
Linux
Serviceability
End-user replaceable parts:
7
2
External component identification
Display components
8
Item
Component
Function
(1)
Ambient light sensor
When activated, the sensor automatically adjusts the
display brightness based on the surrounding lighting
conditions.
(2)
Wireless antenna locations
Send and receive wireless signals to communicate with
WLANs.
(3)
Internal microphone
Records sound.
Chapter 2 External component identification
Top components
Buttons, switches, and fingerprint reader
Item
Component
Function
(1)
Power button
●
When the computer is off, press the button to turn
on the computer.
●
When the computer is on, press the button to shut
down the computer.
●
When the computer is in the Sleep state (Windows
Vista) or in Standby (Windows XP), press the button
briefly to exit the Sleep state or Standby.
●
When the computer is in Hibernation, press the
button briefly to exit Hibernation.
If the computer has stopped responding and Windows®
shutdown procedures are ineffective, press and hold the
power button for at least 5 seconds to turn off the
computer.
To learn more about power settings, follow these steps:
●
In Windows Vista, select Start > Control Panel >
System and Maintenance > Power Options.
●
In Windows XP, select Start > Control Panel >
Performance and Maintenance > Power Options.
(2)
Info button
Launches Info Center, which enables you to open various
software solutions.
(3)
Wireless button
Turns the wireless feature on or off, but does not
establish a wireless connection.
NOTE: A wireless network must be set up in order to
establish a wireless connection.
(4)
Presentation button
Starts the presentation feature.
(5)
Volume mute button
Mutes and restores speaker sound.
Top components
9
Item
Component
Function
(6)
Volume scroll zone
Adjusts speaker volume. Slide your finger to the left to
decrease volume and to the right to increase volume.
You can also press the left side of the volume slider to
decrease volume, or press the right side of the volume
slider to increase volume.
(7)
Calculator button
Turns on the Windows calculator function.
(8)
HP Fingerprint Sensor (fingerprint reader)
Allows a fingerprint logon to Windows, instead of a
password logon.
Keys
NOTE:
10
Your computer may look slightly different from the illustration in this section.
Item
Component
Function
(1)
esc key
Displays system information when pressed in
combination with the fn key.
(2)
fn key
Executes frequently used system functions when pressed
in combination with a function key or the esc key.
(3)
Windows logo key
Displays the Windows Start menu.
(4)
Windows applications key
Displays a shortcut menu for items beneath the pointer.
(5)
Integrated numeric keypad
Can be used like the keys on an external numeric
keypad.
(6)
Function keys
Execute frequently used system functions when pressed
in combination with the fn key.
Chapter 2 External component identification
Lights
Item
Component
Function
(1)
Wireless lights (2)*
●
On: An integrated wireless device, such as a WLAN
device and/or a Bluetooth® device, is on.
●
Off: All wireless devices are off.
●
On: The computer is on.
●
Blinking: The computer is in the Sleep state
(Windows Vista) or Standby (Windows XP).
●
Blinking rapidly: An AC adapter with a higher power
rating should be connected.
●
Off: The computer is off or in Hibernation.
●
Amber: A battery is charging.
●
Green: A battery is close to full charge capacity.
●
Blinking amber: A battery that is the only available
power source has reached a low battery level. When
the battery reaches a critical battery level, the
battery light begins blinking rapidly.
●
Off: If the computer is plugged into an external
power source, the light turns off when all batteries in
the computer are fully charged. If the computer is
not plugged into an external power source, the light
stays off until the battery reaches a low battery level.
●
Blinking green: The hard drive or optical drive is
being accessed.
●
Amber: HP 3D DriveGuard has temporarily parked
the internal hard drive.
(2)
(3)
(4)
Power lights (2)†
Battery light
Drive light
(5)
Caps lock light
On: Caps lock is on.
(6)
Num lock light
On: Num lock is on or the integrated numeric keypad is
enabled.
Top components
11
Item
Component
Function
(7)
Volume mute light
●
Amber: Computer sound is turned off.
●
On: Computer sound is turned on.
(8)
Volume down light
On: The volume scroll zone is being used to decrease
speaker volume.
(9)
Volume up light
On: The volume scroll zone is being used to increase
speaker volume.
*The 2 wireless lights display the same information. The light on the wireless button is visible only when the computer is
open. The wireless light on the front of the computer is visible whether the computer is open or closed.
†The 2 power lights display the same information. The light on the power button is visible only when the computer is open.
The power light on the front of the computer is visible whether the computer is open or closed.
12
Chapter 2 External component identification
Pointing devices
Item
Component
Function
(1)
Pointing stick*
Moves the pointer and selects or activates items on the
screen.
(2)
Left pointing stick button*
Functions like the left button on an external mouse.
(3)
TouchPad*
Moves the pointer and selects or activates items on the
screen.
(4)
Left TouchPad button*
Functions like the left button on an external mouse.
(5)
Center TouchPad button*
Functions like the center button on an external mouse.
(6)
Right TouchPad button*
Functions like the right button on an external mouse.
(7)
TouchPad scroll zone
Scrolls up or down.
(8)
Right pointing stick button*
Functions like the right button on an external mouse.
(9)
Center pointing stick button*
Functions like the center button on an external mouse.
*This table describes factory settings. View or change pointing device preferences as follows:
●
In Windows Vista, select Start > Control Panel > Hardware and Sound > Mouse.
●
In Windows XP, select Start > Control Panel > Printers and Other Hardware > Mouse.
Top components
13
Front components
Item
Component
Function
(1)
Wireless light
●
On: An integrated wireless device, such as a WLAN
device and/or a Bluetooth device, is on.
●
Off: All wireless devices are off.
●
On: The computer is on.
●
Blinking: The computer is in the Sleep state
(Windows Vista) or in Standby (Windows XP).
●
Blinking rapidly: An AC adapter with a higher power
rating should be connected.
●
Off: The computer is off or in Hibernation.
●
Amber: A battery is charging.
●
Green: A battery is close to full charge capacity.
●
Blinking amber: A battery that is the only available
power source has reached a low battery level. When
the battery reaches a critical battery level, the
battery light begins blinking rapidly.
●
Off: If the computer is plugged into an external
power source, the light turns off when all batteries in
the computer are fully charged. If the computer is
not plugged into an external power source, the light
stays off until the battery reaches a low battery level.
●
Blinking green: The hard drive or optical drive is
being accessed.
●
Amber: HP 3D DriveGuard has temporarily parked
the hard drive.
(2)
(3)
(4)
14
Power light
Battery light
Drive light
(5)
Speakers (2)
Produce sound.
(6)
Display release latch
Opens the computer.
(7)
Media Card Reader
Supports the following optional digital card formats:
Secure Digital (SD) Memory Card, Memory Stick Pro,
Memory Stick Duo, xD-Picture Card, and MultiMediaCard
(MMC).
Chapter 2 External component identification
Left-side components
Item
Component
Function
(1)
Security cable slot
Attaches an optional security cable to the computer.
NOTE: The security cable is designed to act as a
deterrent, but it may not prevent the computer from being
mishandled or stolen.
(2)
Vent
Enables airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during routine
operation.
(3)
Power connector
Connects an AC adapter.
(4)
HDMI port
Connects an optional HDMI device.
(5)
External monitor port
Connects an external VGA monitor or projector.
(6)
USB ports (2)
Connect optional USB devices.
(7)
1394 port
Connects an optional IEEE 1394 or 1394a device, such
as a camcorder.
(8)
Smart card reader
Supports smart cards and Java™ cards.
(9)
PC Card slot
Supports optional Type I or Type II 32–bit (CardBus) or
16–bit PC Cards.
(10)
PC Card eject button
Ejects a PC Card from the PC Card slot.
Left-side components
15
Rear component
Component
Function
Vent
Enables airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool
internal components and prevent overheating. It is
normal for the internal fan to cycle on and off during
routine operation.
Right-side components
16
Item
Component
Function
(1)
Audio-out (headphone) jack
Produces sound when connected to optional powered
stereo speakers, headphones, ear buds, a headset, or
television audio.
(2)
Audio-in (microphone) jack
Connects an optional computer headset microphone,
stereo array microphone, or monaural microphone.
(3)
USB ports (4)
Connects up to 4 optional USB devices.
(4)
Optical drive
Reads an optical disc.
(5)
Optical drive button
Releases the media tray.
(6)
RJ-11 (modem) jack
Connects a modem cable.
(7)
RJ-45 (network) jack
Connects a network cable.
Chapter 2 External component identification
Bottom components
Item
Component
Function
(1)
Battery bay
Holds the battery.
(2)
Battery release latches (2)
Release the battery from the battery bay.
(3)
Docking connector
Connects an optional docking device.
(4)
Accessory battery connector (slide open to expose)
Connects an optional accessory battery.
(5)
Hard drive bay
Contains the hard drive and the Bluetooth module.
(6)
Vents (3)
Enable airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during routine
operation.
(7)
Memory module/WLAN module compartment
Contains the expansion memory module slot, the WLAN
module slot, and the RTC battery.
CAUTION: To prevent an unresponsive system,
replace the wireless module only with a wireless module
authorized for use in the computer by the governmental
agency that regulates wireless devices in your country or
region. If you replace the module and then receive a
warning message, remove the module to restore
computer functionality, and then contact technical support
through Help and Support.
Bottom components
17
3
Illustrated parts catalog
Serial number location
When ordering parts or requesting information, provide the computer serial number and model
number located on the bottom of the computer.
18
Chapter 3 Illustrated parts catalog
Computer major components
Item
Description
(1)
Display assemblies (include 3 WLAN antenna transceivers and cables)
17.0-inch, WUXGA WVA AntiGlare
Spare part number
450582-001
Computer major components
19
Item
Description
Spare part number
17.0-inch, WSXGA+ WVA AntiGlare
450580-001
17.0-inch, WSXGA+ WVA BrightView
450581-001
17.0-inch, WXGA+ AnitGlare
450583-001
Display internal components (not illustrated):
20
Ambient light sensor board
450480-001
Display bezel
450500-001
Display inverter
450498-001
Display Bracket Kit (includes left and right display hinges)
450570-001
Display panel cable
450571-001
Wireless Antenna Kit (includes 3 WLAN antenna transceivers and cables)
450475-001
Display enclosure for use with WUXGA display assemblies (includes 3 WLAN antenna
transceivers and cables)
456223-001
Display enclosure for use with WSXGA+ and WXGA+ display assemblies (includes 3 WLAN
antenna transceivers and cables)
450572-001
Display Rubber Kit (includes display bezel rubber screw covers)
450573-001
Display Screw Kit
450574-001
(2)
Switch cover (includes LED board and cable)
450479-001
(3)
Power button board (includes cable)
450481-001
(4)
Keyboards with pointing stick (include pointing stick cable)
For use in Belgium
450471-A41
For use in Brazil
450471-201
For use in the Czech Republic
450471-221
For use in Denmark
450471-081
For use in France
450471-051
For use in French Canada
450471-121
For use in Germany
450471-041
For use in Greece
450471-151
For use in Hungary
450471-211
For use in Iceland
450471-DD1
For use in Israel
450471-BB1
For use in Italy
450471-061
For use in Japan
450471-291
For use in Latin America
450471-161
For use in the Netherlands and Europe
450471-021
For use in Norway
450471-091
Chapter 3 Illustrated parts catalog
Item
Description
Spare part number
For use in Portugal
450471-131
For use in Russia
450471-251
For use in Saudi Arabia
450471-171
For use in Slovakia
450471-231
For use in Slovenia
450471-BA1
For use in South Korea
450471-AD1
For use in Spain
450471-071
For use in Sweden and Finland
450471-B71
For use in Switzerland
450471-111
For use in Taiwan
450471-AB1
For use in Thailand
450471-281
For use in Turkey
450471-141
For use in the United Kingdom
450471-031
For use in the United States
450471-001
Keyboards without pointing stick
For use in Belgium
450472-A41
For use in Brazil
450472-201
For use in the Czech Republic
450472-221
For use in Denmark
450472-081
For use in France
450472-051
For use in French Canada
450472-121
For use in Germany
450472-041
For use in Greece
450472-151
For use in Hungary
450472-211
For use in Iceland
450472-DD1
For use in Israel
450472-BB1
For use in Italy
450472-061
For use in Japan
450472-291
For use in Latin America
450472-161
For use in the Netherlands and Europe
450472-021
For use in Norway
450472-091
For use in Portugal
450472-131
For use in Russia
450472-251
For use in Saudi Arabia
450472-171
Computer major components
21
Item
(5)
(6)
Description
Spare part number
For use in Slovakia
450472-231
For use in Slovenia
450472-BA1
For use in South Korea
450472-AD1
For use in Spain
450472-071
For use in Sweden and Finland
450472-B71
For use in Switzerland
450472-111
For use in Taiwan
450472-AB1
For use in Thailand
450472-281
For use in Turkey
450472-141
For use in the United Kingdom
450472-031
For use in the United States
450472-001
TouchPads (include TouchPad cable)
For use with keyboards with a pointing stick, includes 3 pointing stick buttons and 3
TouchPad buttons
450597-001
For use with keyboards without a pointing stick, includes 2 TouchPad buttons
450596-001
Top covers (include fingerprint reader board and cable )
For use with HP Compaq 8710w computer models
451379-001
For use with HP Compaq 8710p computer models
450595-001
(7)
Graphics card fan/heat sink (includes replacement thermal material)
450594-001
(8)
Heat sink assemblies (include replacement thermal material)
For use only with computer models equipped with processors with 3- or 6-MB L2 cache
468593-001
For use only with computer models equipped with processors with 2- or 4-MB L2 cache
450593-001
Plastics Kit (see Plastics Kit on page 27 for more Plastics Kit spare part information):
450585-001
(9a)
PC Card slot bezel
(9b)
Memory module/WLAN module compartment cover (includes 3 captive screws, secured by C-clips)
Computer feet (not illustrated; 9 feet in 4 different sizes)
22
(9c)
Hard drive cover (includes 2 captive screws, secured by C-clips)
(10)
PC Card assembly
(11)
Intel Core 2 Duo processors (include replacement thermal material)
450584-001
T9500 2.6-GHz processor (6-MB L2 cache, 800-MHz FSB)
463051-001
T9300 2.5-GHz processor (6-MB L2 cache, 800-MHz FSB)
463050-001
T8300 2.4-GHz processor (3-MB L2 cache, 800-MHz FSB)
463049-001
T8100 2.1-GHz processor (3-MB L2 cache, 800-MHz FSB)
463048-001
T7800 2.6-GHz processor (4-MB L2 cache, 800-MHz FSB)
458218-001
T7700 2.4-GHz processor (4-MB L2 cache, 800-MHz FSB)
450589-001
Chapter 3 Illustrated parts catalog
Item
(12)
Description
Spare part number
T7500 2.2-GHz processor (4-MB L2 cache, 800-MHz FSB)
450588-001
T7300 2.0-GHz processor (4-MB L2 cache, 800-MHz FSB)
450587-001
T7250 2.0-GHz processor (4-MB L2 cache, 800-MHz FSB)
460283-001
T7100 1.8-GHz processor (2-MB L2 cache, 800-MHz FSB)
446440-001
Graphics cards (include replacement thermal material)
For use only with computer models equipped with processors with 3- or 6-MB L2 cache
468592-001
For use only with HP Compaq 8710w computer models (nVidia NB8E-GLM graphics card
with 512-MB graphics subsystem memory operating at 800 MHz)
451377-001
For use only with HP Compaq 8710p computer models (nVidia NB8P-NVS2 graphics card
with 256-MB graphics subsystem memory operating at 700 MHz; supports TurboCache)
450484-001
(13)
USB/audio board (includes 2-into-1 USB board cable and audio board cable)
450483-001
(14)
Bluetooth module (includes Bluetooth module cable)
450485-001
(15)
System boards (include replacement thermal material)
For use only with computer models equipped with processors with 3- or 6-MB L2 cache
468591-001
For use only with computer models equipped with processors with 2- or 4-MB L2 cache
450482-001
(16)
Modem module
443899-001
(17)
Speaker assembly
450592-001
(18)
Base enclosure (includes rubber feet)
450476-001
Rubber Kit (includes 9 feet in 4 different sizes)
450590-001
(19)
RTC battery
450478-001
(20)
8-cell, 5.1-Ah, Li-ion battery
450477-001
(21)
Memory modules
(22)
4096-MB memory module (PC2-5300, 667-MHz, DDR2)
469650-001
2048-MB memory module (PC2-5300, 667-MHz, DDR2)
450576-001
1024-MB memory module (PC2-5300, 667-MHz, DDR2)
450575-001
512-MB memory module (PC2-5300, 667-MHz, DDR2)
450577-001
WLAN modules
Intel 802.11a/b/g/n WLAN modules:
●
For use in Antigua and Barbuda, Argentina, Aruba, the Bahamas, Barbados, Bermuda,
Brunei, Canada, the Cayman Islands, Chile, Colombia, Costa Rica, the Dominican
Republic, Ecuador, El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong,
India, Indonesia, Malaysia, Mexico, Panama, Paraguay, Peru, Saudi Arabia, Taiwan,
Uruguay, the United States, Venezuela, and Vietnam
441086-001
●
For use in Austria, Azerbaijan, Bahrain, Belgium, Brazil, Bulgaria, Croatia, Cyprus, the
Czech Republic, Denmark, Egypt, Estonia, Finland, France, Georgia, Germany,
Greece, Hungary, Iceland, Ireland, Israel, Italy, Latvia, Lebanon, Liechtenstein,
Lithuania, Luxembourg, Malta, Monaco, the Netherlands, Norway, Oman, the
Philippines, Poland, Portugal, Qatar, Romania, Russia, Serbia and Montenegro,
Singapore, Slovakia, Slovenia, South Africa, Spain, Sri Lanka, Sweden, Switzerland,
Turkey, Ukraine, the United Kingdom, and Uzbekistan
441086-002
Computer major components
23
Item
Description
Spare part number
●
For use in Australia, New Zealand, Pakistan, the People's Republic of China, and
South Korea
441086-003
●
For use in Japan
441086-291
●
For use in South Korea
441086-AD1
Broadcom 802.11a/b/g WLAN modules:
●
For use in Canada, Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands, and
the United States
441075-001
●
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda,
Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain,
Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia,
Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria,
Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad,
Chile, China, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech
Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador,
Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France,
French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece,
Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissa, Guyana, Haiti, Honduras,
Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast, Jamaica,
Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho,
Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi,
Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania,
Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco,
Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New
Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua
New Guinea, Paraguay, Peru, the Philippines, Poland, Portugal, the Republic of
Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome & Principe,
Saudi Arabia, Senegal, Serbia and Montenegro, the Seychelles, Sierra Leone,
Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South
Korea, Spain, Sri Lanka, St. Kitts & Nevis, St. Lucia, St. Vincent & Grenada, Suriname,
Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad
and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United
Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela,
Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
441075-002
●
For use in Japan
441075-291
Intel 802.11a/b/g WLAN modules:
●
For use in Antigua & Barbuda, Argentina, Aruba, the Bahamas, Barbados, Bermuda,
Brunei, Canada, the Cayman Islands, Chile, Colombia, Costa Rica, the Dominican
Republic, Ecuador, El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong,
India, Indonesia, Malaysia, Mexico, Panama, Paraguay, Peru, Saudi Arabia, Taiwan,
the United States, Uruguay, Venezuela, and Vietnam
441082-001
●
For use in Austria, Azerbaijan, Bahrain, Belgium, Brazil, Bulgaria, Croatia, Cyprus, the
Czech Republic, Denmark, Egypt, Estonia, Finland, France, Georgia, Germany,
Greece, Hungary, Iceland, Ireland, Israel, Italy, Latvia, Lebanon, Liechtenstein,
Lithuania, Luxembourg, Malta, Monaco, the Netherlands, Norway, Oman, the
Philippines, Poland, Portugal, Qatar, Romania, Russia, Serbia and Montenegro,
Singapore, Slovakia, Slovenia, South Africa, Spain, Sri Lanka, Sweden, Switzerland,
Turkey, Ukraine, the United Kingdom, and Uzbekistan
441082-002
●
For use in Australia, New Zealand, Pakistan, the People's Republic of China, and
South Korea
441082-003
●
For use in Japan
441082-291 and
441082-292
Broadcom 802.11b/g WLAN modules:
24
Chapter 3 Illustrated parts catalog
Item
Description
Spare part number
●
For use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands,
and the United States
441090-001
●
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua & Barbuda,
Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain,
Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia,
Bosnia & Herzegovina Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria,
Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, the Central African
Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus,
the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East
Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji,
Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana,
Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissa, Guyana,
Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy,
the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan,
Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg,
Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall
Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia,
Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the
Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Palau,
Panama, Papua New Guinea, Paraguay, the People's Republic of China, Peru, the
Philippines, Poland, Portugal, Qatar, the Republic of Moldova, Romania, Russia,
Rwanda, Samoa, San Marino, Sao Tome & Principe, Saudi Arabia, Senegal, Serbia
and Montenegro, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the
Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts &
Nevis, St. Lucia, St. Vincent & Grenada, Suriname, Swaziland, Sweden, Switzerland,
Taiwan, Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad & Tobago, Tunisia,
Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United
Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia,
and Zimbabwe
441090-002
●
For use in Japan
441090-291
Intel 802.11b/g WLAN module for use in Japan
(23)
(24)
448675-004
Hard drives (include hard drive bracket)
250-GB, 5400-rpm
458219-001
200-GB, 7200-rpm
461876-001
160-GB, 7200-rpm
460282-001
160-GB, 5400-rpm
450495-001
120-GB, 7200-rpm
454987-001
120-GB, 5400-rpm
450494-001
100-GB, 7200-rpm
450493-001
80-GB, 7200-rpm
450497-001
80-GB, 5400-rpm
450496-001
Optical drives
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe
450490-001
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
450491-001
DVD/CD-RW Combo Drive
450492-001
Blu-ray DVD-RW Drive
450489-001
Computer major components
25
Item
26
Description
Spare part number
DVD-ROM Drive
450488-001
Cable Kit (not illustrated; see Cable Kit on page 28 for more Cable Kit spare part number
information)
450486-001
Chapter 3 Illustrated parts catalog
Plastics Kit
Item
Description
Spare part number
Plastics Kit:
450585-001
(1)
Memory module/WLAN module compartment cover (includes 3 captive screws, secured by C-clips)
(2)
Hard drive cover (includes 2 captive screws, secured by C-clips)
(3)
PC Card slot bezel
Plastics Kit
27
Cable Kit
Item
28
Description
Spare part number
Cable Kit:
450486-001
(1)
RJ-45 jack cable
(2)
RJ-11 jack cable
(3)
TouchPad cable
(4)
Bluetooth module cable
(5)
USB/audio board cable
(6)
Microphone extension cable
(7)
Power button board cable
Chapter 3 Illustrated parts catalog
Mass storage devices
Item
Description
(1)
Hard drives (include frame)
(2)
Spare part number
250-GB, 5400-rpm
458219-001
200-GB, 7200-rpm
461876-001
160-GB, 7200-rpm
460282-001
160-GB, 5400-rpm
450495-001
120-GB, 7200-rpm
454987-001
120-GB, 5400-rpm
450494-001
100-GB, 7200-rpm
450493-001
80-GB, 7200-rpm
450497-001
80-GB, 5400-rpm
450496-001
Optical drives (include bezel)
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe
450490-001
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
450491-001
DVD/CD-RW Combo Drive
450492-001
Blu-ray DVD-RW Drive
450489-001
DVD-ROM Drive
450488-001
Miscellaneous parts
Description
Spare part number
AC adapters
180-W PFC AC adapter
463952-001
135-W PFC Smart RC adapter
613155-001
Mass storage devices
29
Description
Spare part number
120-W PFC AC adapter
463953-001
90-W PFC AC adapter
463955-001
External MultiBay II
366143-001
External MultiBay II power cable and stand
366144-001
HP Extended Life Battery
367456-001
Label Kit
450499-001
MultiBay 8X DVD-ROM Drive
373314-001
MultiBay 24X DVD/CD-RW Combo Drive
373315-001
Nylon carrying case
325814-001
USB 1.1 diskette drive
359118-001
Power cords:
30
For use in Australia
403811-011
For use in Brazil
403811-201
For use in Denmark
403811-081
For use in Europe, the Middle East, and Africa
403811-021
For use in India
403811-D61
For use in Israel
403811-BB1
For use in Italy
403811-061
For use in Japan
403811-291
For use in the People's Republic of China
403811-AA1
For use in South Korea
403811-AD1
For use in Switzerland
403811-111
For use in Taiwan
403811-AB1
For use in the United Kingdom
403811-031
Chapter 3 Illustrated parts catalog
Description
Spare part number
For use the United States
403811-001
Screw Kit
450591-001
●
Phillips PM2.5×4.0 screw
●
Phillips PM2.0×10.0 screw
●
Phillips PM2.0×5.0 captive screw
●
Phillips PM2.0×5.0 screw
●
Phillips PM2.0×4.0 screw
●
Phillips PM2.0×3.0 screw
●
Phillips PM2.0×2.0 broad-head screw
●
Phillips PM2.0×2.0 screw
●
Phillips PM1.5×3.0 screw
●
Torx T8M2.5×7.0 screw
●
Torx T8M2.5×4.0 screw
●
Torx T6M2.0×5.0 screw
Sequential part number listing
Spare part
number
Description
325814-001
Nylon carrying case
359118-001
USB 1.1 diskette drive
366143-001
External MultiBay II
366144-001
External MultiBay II power cable and stand
367456-001
HP Extended Life Battery
373314-001
MultiBay 8X DVD-ROM Drive
373315-001
MultiBay 24X DVD/CD-RW Combo Drive
403811-001
Power cord (3-wire) for use in North America
403811-011
Power cord (3-wire) for use in Australia
403811-021
Power cord (3-wire) for use in Europe, the Middle East, and Africa
403811-031
Power cord (3-wire) for use in the United Kingdom
403811-061
Power cord (3-wire) for use in Italy
403811-081
Power cord (3-wire) for use in Denmark
403811-111
Power cord (3-wire) for use in Switzerland
403811-291
Power cord (3-wire) for use in Japan
Sequential part number listing
31
32
Spare part
number
Description
403811-AA1
Power cord (3-wire) for use in the People's Republic of China
403811-AB1
Power cord (3-wire) for use in Taiwan
403811-AD1
Power cord (3-wire) for use in South Korea
403811-BB1
Power cord (3-wire) for use in Israel
403811-D61
Power cord (3-wire) for use in India
416931-001
120-W non-PFC AC adapter
441075-001
Broadcom 802.11a/b/g WLAN module for use in Canada, Cayman Islands, Guam, Puerto Rico, the U.S.
Virgin Islands, and the United States
441075-002
Broadcom 802.11a/b/g WLAN module for use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua
and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain,
Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and
Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi,
Cameroon, Cape Verde, the Central African Republic, Chad, Chile, China, Colombia, Comoros, the Congo,
Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic,
East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France,
French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe,
Guatemala, Guinea, Guinea-Bissa, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland,
Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia,
Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi,
Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico,
Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether
Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau,
Panama, Papua New Guinea, Paraguay, Peru, the Philippines, Poland, Portugal, the Republic of Moldova,
Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome & Principe, Saudi Arabia, Senegal, Serbia and
Montenegro, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia,
South Africa, South Korea, Spain, Sri Lanka, St. Kitts & Nevis, St. Lucia, St. Vincent & Grenada, Suriname,
Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia,
Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay,
Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
441075-291
Broadcom 802.11a/b/g WLAN module for use in Japan
441082-001
Intel 802.11a/b/g WLAN module for use in Antigua & Barbuda, Argentina, Aruba, the Bahamas, Barbados,
Bermuda, Brunei, Canada, the Cayman Islands, Chile, Colombia, Costa Rica, the Dominican Republic,
Ecuador, El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong, India, Indonesia, Malaysia, Mexico,
Panama, Paraguay, Peru, Saudi Arabia, Taiwan, the United States, Uruguay, Venezuela, and Vietnam
441082-002
Intel 802.11a/b/g WLAN module for use in Austria, Azerbaijan, Bahrain, Belgium, Brazil, Bulgaria, Croatia,
Cyprus, the Czech Republic, Denmark, Egypt, Estonia, Finland, France, Georgia, Germany, Greece,
Hungary, Iceland, Ireland, Israel, Italy, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg, Malta,
Monaco, the Netherlands, Norway, Oman, the Philippines, Poland, Portugal, Qatar, Romania, Russia,
Serbia and Montenegro, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri Lanka, Sweden,
Switzerland, Turkey, Ukraine, the United Kingdom, and Uzbekistan
441082-003
Intel 802.11a/b/g WLAN module for use in Australia, New Zealand, Pakistan, the People's Republic of
China, and South Korea
441082-291
Intel 802.11a/b/g WLAN module for use in Japan
441082-292
Intel 802.11a/b/g WLAN module for use in Japan
441086-001
Intel 802.11a/b/g/n WLAN module for use in Antigua and Barbuda, Argentina, Aruba, the Bahamas,
Barbados, Bermuda, Brunei, Canada, the Cayman Islands, Chile, Colombia, Costa Rica, the Dominican
Republic, Ecuador, El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong, India, Indonesia,
Malaysia, Mexico, Panama, Paraguay, Peru, Saudi Arabia, Taiwan, Uruguay, the United States, Venezuela,
and Vietnam
Chapter 3 Illustrated parts catalog
Spare part
number
Description
441086-002
Intel 802.11a/b/g/n WLAN module for use in Austria, Azerbaijan, Bahrain, Belgium, Brazil, Bulgaria, Croatia,
Cyprus, the Czech Republic, Denmark, Egypt, Estonia, Finland, France, Georgia, Germany, Greece,
Hungary, Iceland, Ireland, Israel, Italy, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg, Malta,
Monaco, the Netherlands, Norway, Oman, the Philippines, Poland, Portugal, Qatar, Romania, Russia,
Serbia and Montenegro, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri Lanka, Sweden,
Switzerland, Turkey, Ukraine, the United Kingdom, and Uzbekistan
441086-003
Intel 802.11a/b/g/n WLAN module for use in Australia, New Zealand, Pakistan, the People's Republic of
China, and South Korea
441086-291
Intel 802.11a/b/g/n WLAN module for use in Japan
441086-AD1
Intel 802.11a/b/g/n WLAN module for use in South Korea
441090-001
Broadcom 802.11b/g WLAN module for use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S.
Virgin Islands, and the United States
441090-002
Broadcom 802.11b/g WLAN module for use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua &
Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh,
Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia & Herzegovina Botswana,
Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Cape
Verde, the Central African Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa Rica, Croatia,
Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador,
Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana,
Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea,
Guinea-Bissa, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel,
Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia,
Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi,
Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico,
Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether
Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Palau, Panama, Papua
New Guinea, Paraguay, the People's Republic of China, Peru, the Philippines, Poland, Portugal, Qatar, the
Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome & Principe, Saudi Arabia,
Senegal, Serbia and Montenegro, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the
Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts & Nevis, St. Lucia, St.
Vincent & Grenada, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Thailand,
Togo, Tonga, Trinidad & Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab
Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia,
and Zimbabwe
441090-291
Broadcom 802.11b/g WLAN module for use in Japan
443899-001
Modem module
448675-004
Intel 802.11b/g WLAN module for use in Japan
450471-001
Keyboard with pointing stick for use in the United States (includes keyboard and pointing stick cable)
450471-021
Keyboard with pointing stick for use in Europe (includes keyboard and pointing stick cable)
450471-031
Keyboard with pointing stick for use in the United Kingdom (includes keyboard and pointing stick cable)
450471-041
Keyboard with pointing stick for use in Germany (includes keyboard and pointing stick cable)
450471-051
Keyboard with pointing stick for use in France (includes keyboard and pointing stick cable)
450471-061
Keyboard with pointing stick for use in Italy (includes keyboard and pointing stick cable)
450471-071
Keyboard with pointing stick for use in Spain (includes keyboard and pointing stick cable)
450471-081
Keyboard with pointing stick for use in Denmark (includes keyboard and pointing stick cable)
450471-091
Keyboard with pointing stick for use in Norway (includes keyboard and pointing stick cable)
Sequential part number listing
33
34
Spare part
number
Description
450471-111
Keyboard with pointing stick for use in Switzerland (includes keyboard and pointing stick cable)
450471-121
Keyboard with pointing stick for use in French Canada (includes keyboard and pointing stick cable)
450471-131
Keyboard with pointing stick for use in Portugal (includes keyboard and pointing stick cable)
450471-141
Keyboard with pointing stick for use in Turkey (includes keyboard and pointing stick cable)
450471-151
Keyboard with pointing stick for use in Greece (includes keyboard and pointing stick cable)
450471-161
Keyboard with pointing stick for use in Latin America (includes keyboard and pointing stick cable)
450471-171
Keyboard with pointing stick for use in Saudi Arabia (includes keyboard and pointing stick cable)
450471-201
Keyboard with pointing stick for use in Brazil (includes keyboard and pointing stick cable)
450471-211
Keyboard with pointing stick for use in Hungary (includes keyboard and pointing stick cable)
450471-221
Keyboard with pointing stick for use in the Czech Republic (includes keyboard and pointing stick cable)
450471-231
Keyboard with pointing stick for use in Slovakia (includes keyboard and pointing stick cable)
450471-251
Keyboard with pointing stick for use in Russia (includes keyboard and pointing stick cable)
450471-281
Keyboard with pointing stick for use in Thailand (includes keyboard and pointing stick cable)
450471-291
Keyboard with pointing stick for use in Japan (includes keyboard and pointing stick cable)
450471-A41
Keyboard with pointing stick for use in Belgium (includes keyboard and pointing stick cable)
450471-AB1
Keyboard with pointing stick for use in Taiwan (includes keyboard and pointing stick cable)
450471-AD1
Keyboard with pointing stick for use in South Korea (includes keyboard and pointing stick cable)
450471-B71
Keyboard with pointing stick for use in Sweden and Finland (includes keyboard and pointing stick cable)
450471-BA1
Keyboard with pointing stick for use in Slovenia (includes keyboard and pointing stick cable)
450471-BB1
Keyboard with pointing stick for use in Israel (includes keyboard and pointing stick cable)
450471-DD1
Keyboard with pointing stick for use in Iceland (includes keyboard and pointing stick cable)
450472-001
Keyboard without pointing stick for use in the United States (includes keyboard cable)
450472-021
Keyboard without pointing stick for use in Europe (includes keyboard cable)
450472-031
Keyboard without pointing stick for use in the United Kingdom (includes keyboard cable)
450472-041
Keyboard without pointing stick for use in Germany (includes keyboard cable)
450472-051
Keyboard without pointing stick for use in France (includes keyboard cable)
450472-061
Keyboard without pointing stick for use in Italy (includes keyboard cable)
450472-071
Keyboard without pointing stick for use in Spain (includes keyboard cable)
450472-081
Keyboard without pointing stick for use in Denmark (includes keyboard cable)
450472-091
Keyboard without pointing stick for use in Norway (includes keyboard cable)
450472-111
Keyboard without pointing stick for use in Switzerland (includes keyboard cable)
450472-121
Keyboard without pointing stick for use in French Canada (includes keyboard cable)
450472-131
Keyboard without pointing stick for use in Portugal (includes keyboard cable)
450472-141
Keyboard without pointing stick for use in Turkey (includes keyboard cable)
Chapter 3 Illustrated parts catalog
Spare part
number
Description
450472-151
Keyboard without pointing stick for use in Greece (includes keyboard cable)
450472-161
Keyboard without pointing stick for use in Latin America (includes keyboard cable)
450472-171
Keyboard without pointing stick for use in Saudi Arabia (includes keyboard cable)
450472-201
Keyboard without pointing stick for use in Brazil (includes keyboard cable)
450472-211
Keyboard without pointing stick for use in Hungary (includes keyboard cable)
450472-221
Keyboard without pointing stick for use in the Czech Republic (includes keyboard cable)
450472-231
Keyboard without pointing stick for use in Slovakia (includes keyboard cable)
450472-251
Keyboard without pointing stick for use in Russia (includes keyboard cable)
450472-281
Keyboard without pointing stick for use in Thailand (includes keyboard cable)
450472-291
Keyboard without pointing stick for use in Japan (includes keyboard cable)
450472-A41
Keyboard without pointing stick for use in Belgium (includes keyboard cable)
450472-AB1
Keyboard without pointing stick for use in Taiwan (includes keyboard cable)
450472-AD1
Keyboard without pointing stick for use in South Korea (includes keyboard cable)
450472-B71
Keyboard without pointing stick for use in Sweden (includes keyboard cable)
450472-BA1
Keyboard without pointing stick for use in Slovenia (includes keyboard cable)
450472-BB1
Keyboard without pointing stick for use in Israel (includes keyboard cable)
450472-DD1
Keyboard without pointing stick for use in Iceland (includes keyboard cable)
450475-001
Wireless Antenna Kit (includes 3 WLAN antenna transceivers and cables)
450476-001
Base enclosure (includes rubber computer feet)
450477-001
8-cell, 5.1-Ah battery
450478-001
RTC battery
450479-001
Switch cover (includes LED board and cable)
450480-001
Ambient light sensor board
450481-001
Power button board (includes cable)
450482-001
System board for use only with computer models equipped with processors with 2- or 4-MB L2 cache
(includes replacement thermal material)
450483-001
USB/audio board (includes 2-into-1 USB board cable and audio board cable)
450484-001
Graphics card for use only with HP Compaq 8710p computer models (nVidia NB8P-NVS2 with 256 MB of
graphics subsystem memory operating at 700 MHz, supporting TurboCache; includes replacement thermal
material)
450485-001
Bluetooth module (includes Bluetooth module cable)
450486-001
Cable Kit (see Cable Kit on page 28 for more Cable Kit spare part information
450488-001
DVD-ROM Drive
450489-001
Blu-ray DVD-RW Drive
450490-001
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe
Sequential part number listing
35
36
Spare part
number
Description
450491-001
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
450492-001
DVD/CD-RW Combo Drive
450493-001
100-GB, 7200-rpm hard drive
450494-001
120-GB, 5400-rpm hard drive
450495-001
160-GB, 5400-rpm hard drive
450496-001
80-GB, 5400-rpm hard drive
450497-001
80-GB, 7200-rpm hard drive
450498-001
Display inverter
450499-001
Label Kit
450500-001
Display bezel
450570-001
Display Bracket Kit (includes left and right display hinges)
450571-001
Display cable
450572-001
Display enclosure for use with WSXGA+ and WXGA+ display assemblies (includes 3 WLAN antenna
transceivers and cables)
450573-001
Display Rubber Kit (includes display bezel rubber screw covers)
450574-001
Display Screw Kit
450575-001
1024-MB memory module (PC-5300, 667-GHz, DDR2)
450576-001
2048-MB memory module (PC-5300, 667-GHz, DDR2)
450577-001
512-MB memory module (PC-5300, 667-GHz, DDR2)
450578-001
Microphone extension cable
450580-001
17.0-inch, WSXGA+ WVA AntiGlare display assembly (includes 3 WLAN antenna transceivers and
cables)
450581-001
17.0-inch, WSXGA+ WVA BrightView display assembly (includes 3 WLAN antenna transceivers and cables)
450582-001
17.0-inch, WUXGA+ WVA AntiGlare display assembly (includes 3 WLAN antenna transceivers and cables)
450583-001
17.0-inch, WXGA+ AntiGlare display assembly (includes 3 WLAN antenna transceivers and cables)
450584-001
PC Card assembly
450585-001
Plastics Kit (see Plastics Kit on page 27 for more Plastics Kit spare part information)
446440-001
Intel Core 2 Duo T7100 1.8-GHz processor (2-MB L2 cache, 800-MHz FSB; includes replacement thermal
material)
450587-001
Intel Core 2 Duo T7300 2.0-GHz processor (4-MB L2 cache, 800-MHz FSB; includes replacement thermal
material)
450588-001
Intel Core 2 Duo T7500 2.2-GHz processor (4-MB L2 cache, 800-MHz FSB; includes replacement thermal
material)
450589-001
Intel Core 2 Duo T7700 2.4-GHz processor (4-MB L2 cache, 800-MHz FSB; includes replacement thermal
material)
450590-001
Rubber Kit (includes base enclosure rubber feet
Chapter 3 Illustrated parts catalog
Spare part
number
Description
450591-001
Screw Kit
450592-001
Speaker assembly
450593-001
Heat sink for use only with computer models equipped with processors with 2- or 4-MB L2 cache (includes
replacement thermal material)
450594-001
Fan/heat sink assembly (includes replacement thermal material)
450595-001
Top cover for use with 8710p computer models (includes fingerprint reader board and cable)
450596-001
TouchPad with 2 TouchPad buttons (for use with keyboards without a pointing stick; includes TouchPad
cable)
450597-001
TouchPad with 3 pointing stick buttons and 3 TouchPad buttons (for use with keyboards with a pointing
stick; includes TouchPad cable)
451377-001
Graphics card for use only with HP Compaq 8710w computer models (nVidia NB8E-GLM with 512 MB
graphics subsystem memory operating at 800 MHz; includes replacement thermal material)
451379-001
Top cover for use with 8710w computer models (includes fingerprint reader board and cable)
454987-001
120-GB, 7200-rpm hard drive
456223-001
Display enclosure for use with WUXGA display assemblies (includes 3 WLAN antenna transceivers and
cables)
458218-001
Intel Core 2 Duo T7800 2.6-GHz processor (4-MB L2 cache, 800-MHz FSB; includes replacement thermal
material)
458219-001
250-GB, 5400-rpm hard drive
460282-001
160-GB, 7200-rpm hard drive
460283-001
Intel Core 2 Duo T7250 2.0-GHz processor (4-MB L2 cache, 800-MHz FSB; includes replacement thermal
material)
461876-001
200-GB, 7200-rpm hard drive
463048-001
Intel Core 2 Duo T8100 2.1-GHz processor (4-MB L2 cache, 800-MHz FSB; includes replacement thermal
material)
463049-001
Intel Core 2 Duo T8300 2.4-GHz processor (4-MB L2 cache, 800-MHz FSB; includes replacement thermal
material)
463050-001
Intel Core 2 Duo T9300 2.8-GHz processor (4-MB L2 cache, 800-MHz FSB; includes replacement thermal
material)
463051-001
Intel Core 2 Duo T9500 2.6-GHz processor (4-MB L2 cache, 800-MHz FSB; includes replacement thermal
material)
463952-001
180-W PFC AC adapter
463953-001
120-W PFC AC adapter
463955-001
90-W PFC AC adapter
468591-001
System board for use only with computer models equipped with processors with 3- or 6-MB L2 cache
(includes replacement thermal material)
468592-001
Graphics card for use only with computer models equipped with processors with 3- or 6-MB L2 cache
468593-001
Heat sink for use only with computer models equipped with processors with 3- or 6-MB L2 cache (includes
replacement thermal material)
Sequential part number listing
37
38
Spare part
number
Description
469650-001
4096-MB memory module (PC-5300, 667-GHz, DDR2)
613155-001
135-W PFC Smart RC adapter
Chapter 3 Illustrated parts catalog
4
Removal and replacement procedures
Preliminary replacement requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
●
Flat-bladed screwdriver
●
Magnetic screwdriver
●
Phillips P0 and P1 screwdrivers
●
Torx T8 screwdriver
Service considerations
The following sections include some of the considerations that you must keep in mind during
disassembly and assembly procedures.
NOTE: As you remove each subassembly from the computer, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.
Plastic parts
Using excessive force during disassembly and reassembly can damage plastic parts. Use care when
handling the plastic parts. Apply pressure only at the points designated in the maintenance
instructions.
Preliminary replacement requirements
39
Cables and and pointing stick connectors
CAUTION: When servicing the computer, be sure that cables are placed in their proper locations
during the reassembly process. Improper cable placement can damage the computer.
Cables must be handled with extreme care to avoid damage. Apply only the tension required to
unseat or seat the cables during removal and insertion. Handle cables by the connector whenever
possible. In all cases, avoid bending, twisting, or tearing cables. Be sure that cables are routed in
such a way that they cannot be caught or snagged by parts being removed or replaced. Handle flex
cables with extreme care; these cables tear easily.
Drive handling
CAUTION: Drives are fragile components that must be handled with care. To prevent damage to
the computer, damage to a drive, or loss of information, observe these precautions:
Before removing or inserting a hard drive, shut down the computer. If you are unsure whether the
computer is off or in Hibernation, turn the computer on, and then shut it down through the operating
system.
Before handling a drive, be sure that you are discharged of static electricity. While handling a drive,
avoid touching the connector.
Before removing a diskette drive or optical drive, be sure that a diskette or disc is not in the drive and
be sure that the optical drive tray is closed.
Handle drives on surfaces covered with at least one inch of shock-proof foam.
Avoid dropping drives from any height onto any surface.
After removing a hard drive, an optical drive, or a diskette drive, place it in a
static-proof bag.
Avoid exposing a hard drive to products that have magnetic fields, such as monitors or speakers.
Avoid exposing a drive to temperature extremes or liquids.
If a drive must be mailed, place the drive in a bubble pack mailer or other suitable form of protective
packaging and label the package “FRAGILE.”
40
Chapter 4 Removal and replacement procedures
Grounding guidelines
Electrostatic discharge damage
Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure
determine the degree of sensitivity. Networks built into many integrated and pointing stick circuits
provide some protection, but in many cases, ESD contains enough power to alter device parameters
or melt silicon junctions.
A discharge of static electricity from a finger or other conductor can destroy static-sensitive devices or
microcircuitry. Even if the spark is neither felt nor heard, damage may have occurred.
An electronic device exposed to ESD may not be affected at all and and pointing stick can work
perfectly throughout a normal cycle. Or the device may function normally for a while, then degrade in
the internal layers, reducing its life expectancy.
CAUTION: To prevent damage to the computer when you are removing or installing internal
components, observe these precautions:
Keep components in their electrostatic-safe containers until you area ready to install them.
Use nonmagnetic tools.
Before touching an electronic component, discharge static electricity by using the guidelines
described in this section.
Avoid touching pins, leads, and and pointing stick circuitry. Handle electronic components as little as
possible.
If you remove a component, place it in an electrostatic-safe container.
The following table shows how humidity affects the electrostatic voltage levels generated by different
activities.
CAUTION: A product can be degraded by as little as 700 V.
Typical electrostatic voltage levels
Relative humidity
Event
10%
40%
55%
Walking across carpet
35,000 V
15,000 V
7,500 V
Walking across vinyl floor
12,000 V
5,000 V
3,000 V
Motions of bench worker
6,000 V
800 V
400 V
Removing DIPS from plastic tube
2,000 V
700 V
400 V
Removing DIPS from vinyl tray
11,500 V
4,000 V
2,000 V
Removing DIPS from Styrofoam
14,500 V
5,000 V
3,500 V
Removing bubble pack from PCB
26,500 V
20,000 V
7,000 V
Packing PCBs in foam-lined box
21,000 V
11,000 V
5,000 V
Preliminary replacement requirements
41
Packaging and transporting guidelines
Follow these grounding guidelines when packaging and transporting equipment:
●
To avoid hand and pointing stick contact, transport products in static-safe tubes, bags, or boxes.
●
Protect ESD-sensitive parts and assemblies with conductive or approved and pointing stick
containers or packaging.
●
Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.
●
Place items on a grounded surface before removing items from their containers.
●
Always be properly grounded when touching a component or assembly.
●
Store reusable ESD-sensitive parts from assemblies in protective packaging or nonconductive
foam.
●
Use transporters and and pointing stick conveyors made of antistatic belts and roller bushings.
Be sure that mechanized equipment used for moving materials is wired to ground and that
proper materials are selected to avoid static charging. When grounding is not possible, use an
ionizer to dissipate electric charges.
Workstation guidelines
Follow these grounding workstation guidelines:
42
●
Cover the workstation with approved static-shielding material.
●
Use a wrist strap connected to a properly grounded work surface and use properly grounded
tools and equipment.
●
Use conductive field service tools, such as cutters, screwdrivers, and vacuums.
●
When fixtures must directly contact dissipative surfaces, use fixtures made only of static-safe
materials.
●
Keep the work area free of nonconductive materials, such as ordinary plastic assembly aids and
Styrofoam.
●
Handle ESD-sensitive components, parts, and assemblies by the case or PCM laminate. Handle
these items only at static-free workstations.
●
Avoid and pointing stick contact with pins, leads, or circuitry.
●
Turn off power and input signals before inserting or removing connectors or test equipment.
Chapter 4 Removal and replacement procedures
Equipment guidelines
Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation.
●
When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible
straps with a minimum of one megohm ±10% resistance in the ground and pointing stick cords.
To provide proper ground, wear a strap snugly against the skin at all times. On grounded mats
with banana-plug connectors, use alligator clips to connect a wrist strap.
●
When standing, use foot straps and a grounded floor mat. Foot straps (heel, toe, or boot straps)
can be used at standing workstations and are compatible with most types of shoes or boots. On
conductive floors or dissipative floor mats, use foot straps on both feet with a minimum of one
megohm resistance between the operator and ground. To be effective, the conductive strips
must be worn in contact with the skin.
The following grounding equipment is recommended to prevent electrostatic damage:
●
Antistatic tape
●
Antistatic smocks, aprons, and sleeve protectors
●
Conductive bins and other assembly or soldering aids
●
Nonconductive foam
●
Conductive tabletop workstations with ground and pointing stick cords of one megohm
resistance
●
Static-dissipative tables or floor mats with hard ties to the ground
●
Field service kits
●
Static awareness labels
●
Material-handling packages
●
Nonconductive plastic bags, tubes, or boxes
●
Metal tote boxes
●
Electrostatic voltage levels and protective materials
The following table lists the shielding protection provided by antistatic bags and floor mats.
Material
Use
Voltage protection level
Antistatic plastic
Bags
1,500 V
Carbon-loaded plastic
Floor mats
7,500 V
Metallized laminate
Floor mats
5,000 V
Preliminary replacement requirements
43
Unknown user password
NOTE: This process will not work if Stringent Security is enabled in F10 Setup. Stringent Security
installs passwords into the ROM so that it is not affected when the RTC battery is removed.
If the computer you are servicing has an unknown user password, follow these steps to clear the
password:
NOTE:
These steps also clear CMOS.
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the real-time clock (RTC) battery (see RTC battery on page 59).
6.
Wait approximately 5 minutes.
7.
Replace the RTC battery and reassemble the computer.
8.
Connect AC power to the computer. Do not reinsert any batteries at this time.
9.
Turn on the computer.
All passwords and all CMOS settings have been cleared.
44
Chapter 4 Removal and replacement procedures
Component replacement procedures
This chapter provides removal and replacement procedures.
There are as many as 97 screws and screw locks, in 18 different sizes, that must be removed,
replaced, or loosened when servicing the computer. Make special note of each screw and screw lock
size and location during removal and replacement.
Serial number
Report the computer serial number to HP when requesting information or ordering spare parts. The
serial number is located on the bottom of the computer.
Computer feet
The computer feet are adhesive-backed rubber pads. The feet are included in the Rubber Kit, spare
part number 450590-001. There are 9 rubber feet, in 4 different sizes, that attach to the base
enclosure in the locations illustrated below.
Component replacement procedures
45
Battery
Description
Spare part number
8-cell, 5.1-Ah, Li-ion battery
450477-001
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
Remove the battery:
1.
Turn the computer upside down on a flat surface, with the battery bay toward you.
2.
Slide the battery release latches (1) to release the battery.
3.
Remove the battery (2) from the computer.
Install the battery by inserting it into the battery bay until you hear a click.
46
Chapter 4 Removal and replacement procedures
Display inverter and ambient light sensor board
NOTE: If it has been determined that the display inverter or the ambient light sensor board are the
components that must be replaced to complete the computer repair, the display assembly does not
have to be removed. Follow the procedures in this section to replace the display inverter or ambient
light sensor board . For information on replacing the display assembly, the display hinges, or the
display bezel, see Display assembly on page 79.
Description
Spare part number
Display inverter
450498-001
Ambient light sensor board
450480-001
Before removing the display inverter, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
Remove the display inverter:
1.
Turn the computer right-side up, with the front toward you.
2.
Open the computer as far as possible.
Component replacement procedures
47
3.
Remove the screw covers, screws, and stabilizer clips listed below. All rubber screw covers are
included in the Display Rubber Kit, spare part number 450573-001.
(1) Two flat rubber screw covers
(2) Two small oblong rubber screw covers
(3) Four Phillips PM2.0×6.0 screws
(4) Two stabilizer clips
48
4.
Flex the inside edges of the left and right sides (1) and the display bezel bottom edge (2) until
the bezel disengages from the display assembly.
5.
Release the display bezel bottom edge (3) from the display assembly.
6.
Remove the Torx T8M2.5×4.0 screw (1) that secures the ambient light sensor board to the
display enclosure.
7.
Release the ambient light sensor board (2) from the display enclosure as far as the ambient light
sensor board cable allows.
Chapter 4 Removal and replacement procedures
8.
Disconnect the ambient light sensor board cable (3) from the ambient light sensor board.
9.
Remove the Torx T8M2.5×4.0 screw (1) that secures the display inverter to the display
enclosure.
10. Release the inverter (2) from the display enclosure as far as the display panel cable and
backlight cable allow.
11. Disconnect the display panel cable (3) and the backlight cable (4) from the display inverter.
12. Remove the display inverter.
Reverse this procedure to install the display inverter.
Component replacement procedures
49
Hard drive
Description
Spare part number
250-GB, 5400-rpm hard drive
458219-001
200-GB, 7200-rpm hard drive
461876-001
160-GB, 7200-rpm hard drive
460282-001
160-GB, 5400-rpm hard drive
450495-001
120-GB, 7200-rpm hard drive
454987-001
120-GB, 5400-rpm hard drive
450494-001
100-GB, 7200-rpm hard drive
450493-001
80-GB, 7200-rpm hard drive
450497-001
80-GB, 5400-rpm hard drive
450496-001
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
Remove the hard drive:
50
1.
Position the computer with the front toward you.
2.
Loosen the two Phillips PM2.0×17.0 captive screws (1) that secure the hard drive cover to the
computer.
Chapter 4 Removal and replacement procedures
3.
Lift the right side of the hard drive cover (2), swing it to left, and remove the cover. The hard
drive cover is included in the Plastics Kit, spare part number 450585-001.
4.
Loosen the Phillips PM2.5×13.0 captive screw (1) that secures the hard drive to the computer.
5.
Grasp the Mylar tab (2) on the hard drive and slide the hard drive (3) to the left to disconnect it
from the system board.
6.
Remove the hard drive (4) from the hard drive bay.
7.
If it is necessary to replace the hard drive bracket, remove the two Phillips PM3.0×4.0 hard drive
bracket screws (1) from each side of the hard drive.
Component replacement procedures
51
8.
Lift the bracket (2) straight up to remove it from the hard drive.
Reverse this procedure to reassemble and install the hard drive.
52
Chapter 4 Removal and replacement procedures
Bluetooth module
Description
Spare part number
Bluetooth module (includes Bluetooth module cable)
450485-001
Before removing the Bluetooth module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the hard drive (see Hard drive on page 50).
Remove the Bluetooth® module:
1.
Position the computer with the rear panel toward you.
2.
Release the Bluetooth module (1) from the clip in the hard drive bay by sliding it forward.
3.
Remove the Bluetooth module (2) from the hard drive bay by lifting it straight up.
4.
Disconnect the Bluetooth module cable (3) from the Bluetooth module.
Reverse this procedure to reassemble and install the Bluetooth module.
Component replacement procedures
53
Primary memory module
Description
Spare part number
4096-MB (PC2-5300, 667-MHz, DDR2)
469650-001
2048-MB (PC2-5300, 667-MHz, DDR2)
450576-001
1024-MB (PC2-5300, 667-MHz, DDR2)
450575-001
512-MB (PC2-5300, 667-MHz, DDR2)
450577-001
Before removing the primary memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
Remove the primary memory module:
54
1.
Loosen the three Phillips PM2.5×5.0 captive screws (1) that secure the memory module/WLAN
module compartment cover to the computer.
2.
Lift the front edge of the cover (2), swing it up and forward, and remove the cover. The memory
module/WLAN module compartment cover is included in the Plastics Kit, spare part number
450585-001.
3.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
Chapter 4 Removal and replacement procedures
4.
Remove the memory module (2) by pulling the module away from the slot at an angle.
NOTE: Memory modules are designed with a notch (3) to prevent incorrect installation into the
memory module slot.
Reverse this procedure to install the primary memory module.
Component replacement procedures
55
WLAN module
Description
Spare part number
Intel 802.11a/b/g/n WLAN modules:
●
For use in Antigua and Barbuda, Argentina, Aruba, the Bahamas, Barbados, Bermuda,
Brunei, Canada, the Cayman Islands, Chile, Colombia, Costa Rica, the Dominican Republic,
Ecuador, El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong, India, Indonesia,
Malaysia, Mexico, Panama, Paraguay, Peru, Saudi Arabia, Taiwan, Uruguay, the United
States, Venezuela, and Vietnam
441086-001
●
For use in Austria, Azerbaijan, Bahrain, Belgium, Brazil, Bulgaria, Croatia, Cyprus, the Czech
Republic, Denmark, Egypt, Estonia, Finland, France, Georgia, Germany, Greece, Hungary,
Iceland, Ireland, Israel, Italy, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg, Malta,
Monaco, the Netherlands, Norway, Oman, the Philippines, Poland, Portugal, Qatar,
Romania, Russia, Serbia and Montenegro, Singapore, Slovakia, Slovenia, South Africa,
Spain, Sri Lanka, Sweden, Switzerland, Turkey, Ukraine, the United Kingdom, and
Uzbekistan
441086-002
●
For use in Australia, New Zealand, Pakistan, the People's Republic of China, and South
Korea
441086-003
●
For use in Japan
441086-291
●
For use in South Korea
441086-AD1
Broadcom 802.11a/b/g WLAN modules:
●
For use in Canada, Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands, and the
United States
441075-001
●
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina,
Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh,
Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and
Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso,
Burundi, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, China,
Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark,
Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador,
Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon,
Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala,
Guinea, Guinea-Bissa, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India,
Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati,
Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg,
Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands,
Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro,
Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New
Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New
Guinea, Paraguay, Peru, the Philippines, Poland, Portugal, the Republic of Moldova,
Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome & Principe, Saudi Arabia,
Senegal, Serbia and Montenegro, the Seychelles, Sierra Leone, Singapore, Slovakia,
Slovenia, the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St.
Kitts & Nevis, St. Lucia, St. Vincent & Grenada, Suriname, Swaziland, Sweden, Switzerland,
Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey,
Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom,
Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
441075-002
●
For use in Japan
441075-291
Intel 802.11a/b/g WLAN modules:
●
56
For use in Antigua & Barbuda, Argentina, Aruba, the Bahamas, Barbados, Bermuda, Brunei,
Canada, the Cayman Islands, Chile, Colombia, Costa Rica, the Dominican Republic,
Ecuador, El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong, India, Indonesia,
Malaysia, Mexico, Panama, Paraguay, Peru, Saudi Arabia, Taiwan, the United States,
Uruguay, Venezuela, and Vietnam
Chapter 4 Removal and replacement procedures
441082-001
Description
Spare part number
●
For use in Austria, Azerbaijan, Bahrain, Belgium, Brazil, Bulgaria, Croatia, Cyprus, the Czech
Republic, Denmark, Egypt, Estonia, Finland, France, Georgia, Germany, Greece, Hungary,
Iceland, Ireland, Israel, Italy, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg, Malta,
Monaco, the Netherlands, Norway, Oman, the Philippines, Poland, Portugal, Qatar,
Romania, Russia, Serbia and Montenegro, Singapore, Slovakia, Slovenia, South Africa,
Spain, Sri Lanka, Sweden, Switzerland, Turkey, Ukraine, the United Kingdom, and
Uzbekistan
441082-002
●
For use in Australia, New Zealand, Pakistan, the People's Republic of China, and South
Korea
441082-003
●
For use in Japan
441082-291 and
441082-292
802.11b/g Broadcom WLAN modules:
●
For use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands, and the
United States
441090-001
●
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua & Barbuda, Argentina,
Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh,
Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia & Herzegovina
Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi,
Cambodia, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, Colombia,
Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti,
Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial
Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia,
Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea,
Guinea-Bissa, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia,
Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait,
Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg,
Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands,
Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro,
Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New
Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Palau, Panama, Papua New Guinea,
Paraguay, the People's Republic of China, Peru, the Philippines, Poland, Portugal, Qatar,
the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome &
Principe, Saudi Arabia, Senegal, Serbia and Montenegro, the Seychelles, Sierra Leone,
Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South Korea,
Spain, Sri Lanka, St. Kitts & Nevis, St. Lucia, St. Vincent & Grenada, Suriname, Swaziland,
Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad &
Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates,
the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire,
Zambia, and Zimbabwe
441090-002
●
For use in Japan
441090-291
802.11b/g Intel WLAN module for use in Thailand
448675-004
Before removing the WLAN module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
Component replacement procedures
57
4.
Remove the battery (see Battery on page 46).
5.
Remove the memory module/WLAN module compartment cover (see Primary memory module
on page 54).
Remove the WLAN module:
1.
Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.
NOTE: The black WLAN antenna cable is connected to the WLAN module “Main” terminal.
The white WLAN antenna cable is connected to the WLAN module “Aux” terminal. If the
computer is equipped with an 802.11a/b/g/n WLAN module, the yellow WLAN antenna cable (2)
is connected to the middle terminal on the WLAN module.
2.
Remove the two Phillips PM2.0×3.0 screws (3) that secure the WLAN module to the computer.
(The edge of the module opposite the slot rises away from the computer.)
3.
Remove the WLAN module (4) by pulling the module away from the slot at an angle.
NOTE: WLAN modules are designed with a notch (5) to prevent incorrect installation.
Reverse this procedure to install the WLAN module.
58
Chapter 4 Removal and replacement procedures
RTC battery
NOTE: Removing the RTC battery and leaving it uninstalled for 5 or more minutes causes all
passwords and CMOS settings to be cleared.
Description
Spare part number
RTC battery
450478-001
Before removing the RTC battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the memory module/WLAN module compartment cover (see Primary memory module
on page 54).
Remove the RTC battery:
1.
Disconnect the RTC battery cable (1) from the system board.
2.
Remove the RTC battery (2) from the clip built into the base enclosure.
Reverse this procedure to install the RTC battery.
Component replacement procedures
59
Optical drive
Description
Spare part number
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe
450490-001
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
450491-001
DVD/CD-RW Combo Drive
450492-001
Blu-ray DVD-RW Drive
450489-001
DVD-ROM Drive
450488-001
Before removing the optical drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
Remove the optical drive:
60
1.
Position the computer with the left side toward you.
2.
Remove the Phillips PM2.5×9.0 screw (1) that secures the optical drive to the computer.
3.
Insert a flat-bladed screwdriver or similar tool into the optical drive tab access (2) and press the
tab to the left to release the optical drive from the computer.
4.
Remove the optical drive (3).
5.
If it is necessary to replace the optical drive bracket, position the optical drive with the rear
toward you.
Chapter 4 Removal and replacement procedures
6.
Remove the two Phillips PM2.0×4.0 screws (1) that secure the optical drive bracket to the optical
drive.
7.
Remove the optical drive bracket (2).
Reverse this procedure to install an optical drive.
Component replacement procedures
61
Keyboard
For use in:
Spare part number
For use in:
Spare part number
Keyboards with pointing stick (includes pointing stick cable):
Belgium
450471-A41
Norway
450471-091
Brazil
450471-201
Portugal
450471-131
The Czech Republic
450471-221
Russia
450471-251
Denmark
450471-081
Saudi Arabia
450471-171
France
450471-051
Slovakia
450471-231
French Canada
450471-121
Slovenia
450471-AD1
Germany
450471-041
South Korea
450471-BA1
Greece
450471-151
Spain
450471-071
Hungary
450471-211
Sweden and Finland
450471-B71
Iceland
450471-DD1
Switzerland
450471-111
Israel
450471-BB1
Taiwan
450471-AB1
Italy
450471-061
Thailand
450471-281
Japan
450471-291
Turkey
450471-141
Latin America
450471-161
The United Kingdom
450471-031
The Netherlands and Europe
450471-021
The United States
450471-001
Belgium
450472-A41
Norway
450472-091
Brazil
450472-201
Portugal
450472-131
The Czech Republic
450472-221
Russia
450472-251
Denmark
450472-081
Saudi Arabia
450472-171
France
450472-051
Slovakia
450472-231
French Canada
450472-121
Slovenia
450472-AD1
Germany
450472-041
South Korea
450472-BA1
Greece
450472-151
Spain
450472-071
Hungary
450472-211
Sweden and Finland
450472-B71
Iceland
450472-DD1
Switzerland
450472-111
Israel
450472-BB1
Taiwan
450472-AB1
Italy
450472-061
Thailand
450472-281
Japan
450472-291
Turkey
450472-141
Latin America
450472-161
The United Kingdom
450472-031
The Netherlands and Europe
450472-021
The United States
450472-001
Keyboards without pointing stick:
62
Chapter 4 Removal and replacement procedures
Before removing the keyboard, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
Remove the keyboard:
1.
Position the computer with the front toward you.
2.
Loosen the four Phillips PM2.5×9.0 captive screws that secure the keyboard to the computer.
3.
Open the computer, and rest it on its right side.
Component replacement procedures
63
4.
Lift the upper left corner of the keyboard (1) and swing the left side of the keyboard (2) forward.
5.
Turn the computer right-side up, with the front toward you.
6.
Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached, and
disconnect the keyboard cable (2) from the system board.
7.
Release the ZIF connector (3) to which the pointing stick cable is attached, and disconnect the
pointing stick cable (4) from the system board.
8.
Remove the keyboard.
Reverse this procedure to install the keyboard.
64
Chapter 4 Removal and replacement procedures
Expansion memory module
Description
Spare part number
4096-MB (PC2-5300, 667-MHz, DDR2)
469650-001
2048-MB (PC2-5300, 667-MHz, DDR2)
450576-001
1024-MB (PC2-5300, 667-MHz, DDR2)
450575-001
512-MB (PC2-5300, 667-MHz, DDR2)
450577-001
Before removing the expansion memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the keyboard (see Keyboard on page 62).
Remove the expansion memory module:
1.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
2.
Remove the memory module (2) by pulling the module away from the slot at an angle.
NOTE: Memory modules are designed with a notch (3) to prevent incorrect installation into the
memory module slot.
Reverse this procedure to install the expansion memory module.
Component replacement procedures
65
TouchPad
NOTE:
All TouchPad spare part kits include a TouchPad cable.
Description
Spare part number
For use with keyboards with a pointing stick, includes 3 pointing stick buttons and 3 TouchPad
buttons
450597-001
For use with keyboards without a pointing stick, includes 2 TouchPad buttons
450596-001
Before removing the TouchPad, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the keyboard (see Keyboard on page 62).
Remove the TouchPad:
66
1.
Turn the computer upside down, with the front toward you.
2.
Remove the Torx T8M2.5×9.0 screw that secures the TouchPad to the computer.
3.
Turn the computer right-side up, with the front toward you.
4.
Disconnect the TouchPad cable (1) from the system board.
Chapter 4 Removal and replacement procedures
5.
Lift the rear edge of the TouchPad (2) until it disengages from the top cover.
6.
Remove the TouchPad.
Reverse this procedure to install the TouchPad.
Component replacement procedures
67
Modem module
Description
Spare part number
Modem module
443899-001
Before removing the modem module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the keyboard (see Keyboard on page 62).
6.
Remove the TouchPad (see TouchPad on page 66).
Remove the modem module:
1.
Remove the two Phillips PM2.0×4.0 screws (1) that secure the modem module to the system
board.
2.
Disconnect the modem module (2) from the system board by lifting it straight up.
3.
Disconnect the modem module cable (3) from the modem module.
4.
Remove the modem module.
Reverse this procedure to install the modem module.
68
Chapter 4 Removal and replacement procedures
Switch cover
Description
Spare part number
Switch cover (includes LED board and cable)
450479-001
Before removing the switch cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the keyboard (see Keyboard on page 62).
Remove the switch cover:
1.
Turn the computer upside down, with the rear panel toward you.
2.
Remove the four Torx T8M2.5×4.0 screws that secure the switch cover to the computer.
3.
Turn the computer right-side up, with the front toward you.
4.
Open the computer as far as possible.
5.
Disconnect the power button board cable (1) from the system board.
Component replacement procedures
69
6.
Lift the front edge of the switch cover (2) until it disengages from the computer.
7.
Release the ZIF connector (1) to which the LED board cable is connected and disconnect the
cable from the system board.
8.
Remove the switch cover (2).
Reverse this procedure to install the switch cover.
70
Chapter 4 Removal and replacement procedures
Power button board
Description
Spare part number
Power button board (includes cable)
450481-001
Before removing the power button board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the keyboard (see Keyboard on page 62).
6.
Remove the switch cover (see Switch cover on page 69).
Remove the power button board:
1.
Turn the switch cover upside down, with the front toward you.
2.
Remove the Torx T8M2.5×4.0 screw (1) that secures the power button board to the switch
cover.
3.
Remove the power button board (2).
Reverse this procedure to install the power button board.
Component replacement procedures
71
Fan/heat sink assembly
Description
Spare part number
Fan/heat sink assembly (includes replacement thermal material)
450594-001
Before removing the fan/heat sink assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the keyboard (see Keyboard on page 62).
6.
Remove the switch cover (see Switch cover on page 69).
Remove the fan/heat sink assembly:
72
1.
Disconnect the fan cable (1) from the system board.
2.
Remove the Torx T8M2.5×7.0 screw (2) that secures the fan/heat sink assembly to the
computer.
3.
Loosen the four Torx T8M2.0×10.0 screws (3) that secure the fan/heat sink assembly to the
computer.
4.
Lift the front edge of the fan/heat sink assembly (1) to disengage it from the system board and
graphics card.
Chapter 4 Removal and replacement procedures
5.
Remove the fan/heat sink assembly (2) by sliding it forward.
NOTE: The thermal material must be thoroughly cleaned from the surfaces of the graphics card (1)
and fan/heat sink assembly(2) each time the fan/heat sink assembly is removed. Thermal material is
included with all fan/heat sink assembly and graphics card spare part kits.
Reverse this procedure to reassemble and install the fan/heat sink assembly.
Component replacement procedures
73
Graphics card
NOTE:
All graphics card spare part kits include replacement thermal material.
Description
Spare part number
For use only with computer models equipped with processors with 3- or 6-MB L2 cache
468952-001
For use only with HP Compaq 8710w computer models with processors with 2- or 4-MB L2 cache
(nVidia NB8E-GLM graphics card with 512 MB graphics subsystem memory operating at 800
MHz)
451377-001
For use only with HP Compaq 8710p computer models with processors with 2- or 4-MB L2 cache
(nVidia NB8P-NVS2 graphics card with 256 MB of graphics subsystem memory operating at 700
MHz; supports TurboCache)
450484-001
Before removing the graphics card, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the following components:
a.
Keyboard (see Keyboard on page 62)
b.
Switch cover (see Switch cover on page 69)
c.
Fan/heat sink assembly (see Fan/heat sink assembly on page 72)
Remove the graphics card:
74
1.
Remove the two HM5.0×10.0 standoffs (1) that secure the graphics card to the system board.
2.
Lift the front edge of the graphics card (2) until it clears the adjacent edge of the top cover.
Chapter 4 Removal and replacement procedures
3.
Remove the graphics card (3) by sliding it away from the graphics card slot at an angle.
NOTE: The graphics card is designed with a notch (4) to prevent incorrect installation.
NOTE: The thermal material must be thoroughly cleaned from the surfaces of the graphics
card (1) and fan/heat sink assembly(2) each time the fan/heat sink assembly is removed.
Thermal material is included with all fan/heat sink assembly and graphics card spare part kits.
Reverse this procedure to install the graphics card.
Component replacement procedures
75
Heat sink
NOTE:
Replacement thermal material is included with all heat sink spare part kits.
Description
Spare part number
For use only with computer models equipped with processors with 3- or 6-MB L2 cache
468593-001
For use only with computer models equipped with processors with 2- or 4-MB L2 cache
450593-001
Before removing the processor heat sink, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the following components:
a.
Keyboard (see Keyboard on page 62)
b.
Switch cover (see Switch cover on page 69)
c.
Fan/heat sink assembly (see Fan/heat sink assembly on page 72)
Remove the processor heat sink:
76
1.
Loosen the four Phillips PM2.5×7.0 screws (1) that secure the processor heat sink to the base
enclosure.
2.
Lift the right side of the processor heat sink (2) until it disengages from the processor.
3.
Release the processor heat sink (3) by sliding it to the right until it clears the base enclosure.
4.
Remove the processor heat sink.
Chapter 4 Removal and replacement procedures
Reverse this procedure to install the processor heat sink.
NOTE: The thermal material must be thoroughly cleaned from the surfaces of the processor heat
sink (1) and the processor (2) each time the processor heat sink is removed. Thermal material is
included with all processor heat sink and processor spare part kits.
Processor
NOTE:
Replacement thermal material is included with all processor spare part kits.
Description
Spare part number
Intel Core 2 Duo T9500 2.6-GHz processor (6-MB L2 cache, 800-MHz FSB)
463051-001
Intel Core 2 Duo T9300 2.5-GHz processor (6-MB L2 cache, 800-MHz FSB)
463050-001
Intel Core 2 Duo T8300 2.4-GHz processor (3-MB L2 cache, 800-MHz FSB)
463049-001
Intel Core 2 Duo T8100 2.1-GHz processor (3-MB L2 cache, 800-MHz FSB)
463048-001
Intel Core 2 Duo T7800 2.6-GHz processor (4-MB L2 cache, 800-MHz FSB)
458218-001
Intel Core 2 Duo T7700 2.4-GHz processor (4-MB L2 cache, 800-MHz FSB)
450589-001
Intel Core 2 Duo T7500 2.2-GHz processor (4-MB L2 cache, 800-MHz FSB)
450588-001
Intel Core 2 Duo T7300 2.0-GHz processor (4-MB L2 cache, 800-MHz FSB)
450587-001
Intel Core 2 Duo T7250 2.0-GHz processor (4-MB L2 cache, 800-MHz FSB)
460283-001
Intel Core 2 Duo T7100 1.8-GHz processor (2-MB L2 cache, 800-MHz FSB)
446440-001
Before removing the processor, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
Component replacement procedures
77
4.
Remove the battery (see Battery on page 46).
5.
Remove the following components:
a.
Keyboard (see Keyboard on page 62)
b.
Switch cover (see Switch cover on page 69)
c.
Fan/heat sink assembly (see Fan/heat sink assembly on page 72)
d.
Processor heat sink (see Heat sink on page 76)
Remove the processor:
1.
Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn
counterclockwise until you hear a click.
2.
Lift the processor (2) straight up and remove it.
NOTE: The gold triangle (3) on the processor must be aligned with the triangle (4) embossed
on the processor socket when you install the processor.
Reverse this procedure to install the processor.
78
Chapter 4 Removal and replacement procedures
Display assembly
NOTE:
All display assembly spare part kits include 3 WLAN antenna transceivers and cables.
Description
Spare part number
17.0-inch, WUXGA+ WVA AntiGlare display assembly
450582-001
17.0-inch, WSXGA+ WVA AntiGlare display assembly
450580-001
17.0-inch, WSXGA+ WVA BrightView display assembly
450581-001
17.0-inch, WXGA+ AntiGlare display assembly
450583-001
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 46).
5.
Remove the keyboard (see Keyboard on page 62).
6.
Remove the switch cover (see Switch cover on page 69).
Remove the display assembly:
1.
Turn the computer upside down, with the rear panel toward you.
2.
Remove the two Torx T8M2.5×9.0 screws (1) from the rear panel that secure the display
assembly to the computer.
3.
Remove the three Torx T8M2.5×9.0 screws (2) from the base enclosure that secure the display
assembly to the computer.
4.
Turn the computer right-side up, with the front toward you.
Component replacement procedures
79
5.
Disconnect the display panel cable (1) from the system board.
6.
Remove the wireless antenna cables, the microphone cable, and the microphone extension
cable from the clips (2) and routing channels built into the top cover.
7.
Disconnect the microphone cable (3) from the microphone extension cable.
8.
Open the computer as far as possible.
9.
Remove the two Torx T8M2.5×4.0 screws (1) that secure the display assembly to the computer.
10. Lift the display assembly (2) straight up and remove it.
80
Chapter 4 Removal and replacement procedures
11. If it is necessary to replace the display bezel or display hinges, remove the rubber screw covers
listed below. All rubber screw covers are included in the Display Rubber Kit, spare part number
450573-001.
NOTE: See Display inverter and ambient light sensor board on page 47 for display inverter and
ambient light sensor board replacement instructions.
(1) Two rounded rubber screw covers on the display bezel top edge corners
(2) Two flat rubber screw covers on the display bezel bottom edge corners
(3) Two small oblong rubber screw covers on the display bezel top edge
(4) Two large oblong rubber screw covers on the display bezel top edge
12. Remove the following screws:
(1) Six Phillips PM2.5×7.0 screws
(2) Two Phillips PM2.0×6.0 screws
(3) Two stabilizer clips
Component replacement procedures
81
13. Flex the inside edges of the left and right sides (1) and the top and bottom sides (2) of the
display bezel until the bezel disengages from the display enclosure.
14. Remove the display bezel (3). The display bezel is available using spare part number
450500-001.
15. Remove the four mylar screw covers (1) from the left and right sides of the display enclosure.
16. Remove the four Torx T8M2.5×4.0 screws (2) that secure the display panel to the display
enclosure.
82
Chapter 4 Removal and replacement procedures
17. Remove the following screws:
(1) Two Torx T8M2.5×4.0 screws on the display panel top edge
(2) Two Torx T8M2.5×7.0 screws on the display panel bottom edge
(3) One Torx T8M2.5×4.0 screw that secures the ambient light sensor to the display enclosure
(4) One Torx T8M2.5×4.0 screw that secures the display inverter to the display enclosure
18. Remove the display panel from the display enclosure.
19. Remove the four Phillips PM2.0×4.0 screws (1) that secure each display hinge to the display
panel.
Component replacement procedures
83
20. Remove the display hinges (2). The left and right display hinges are included in the Display
Bracket Kit, spare part number 450570-001.
Reverse this procedure to reassemble and install the display assembly.
84
Chapter 4 Removal and replacement procedures
Top cover
NOTE:
All top cover spare part kits include a fingerprint reader board and cable.
Description
Spare part number
For use only with HP Compaq 8710w computer models
451379-001
For use only with HP Compaq 8710p computer models
450595-001
Before removing the top cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the following components:
a.
Battery (see Battery on page 46)
b.
Keyboard (see Keyboard on page 62)
c.
Switch cover (see Switch cover on page 69)
d.
Display assembly (see Display assembly on page 79)
Remove the top cover:
1.
Turn the computer upside down, with the front toward you.
2.
Remove the fourteen Torx T8M2.5×9.0 screws that secure the top cover to the base enclosure.
3.
Turn the computer right-side up, with the front toward you.
Component replacement procedures
85
86
4.
Disconnect the fingerprint reader board cable from the system board.
5.
Remove the three Torx T8M2.5×7.0 screws that secure the top cover to the computer.
6.
Lift the rear edge of the top cover (1) until it rests at an angle.
7.
Swing the rear edge of the top cover (2) up and forward until it disengages from the base
enclosure.
Chapter 4 Removal and replacement procedures
8.
Remove the top cover (3).
Reverse this procedure to install the top cover.
Speaker assembly
Description
Spare part number
Speaker assembly
450592-001
Before removing the speaker assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the following components:
a.
Battery (see Battery on page 46)
b.
Keyboard (see Keyboard on page 62)
c.
Switch cover (see Switch cover on page 69)
d.
Display assembly (see Display assembly on page 79)
e.
Top cover (see Top cover on page 85)
Remove the speaker assembly:
1.
Disconnect the speaker cable (1) from the system board.
Component replacement procedures
87
2.
Remove the speaker assembly (2) from the base enclosure.
Reverse this procedure to install the speaker assembly.
88
Chapter 4 Removal and replacement procedures
System board
NOTE:
Replacement thermal material is included with all system board spare part kits.
Description
Spare part number
For use only with computer models equipped with processors with 3- or 6-MB L2 cache
468591-001
For use only with computer models equipped with processors with 2- or 4-MB L2 cache
450482-001
Before removing the system board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the following components:
a.
Battery (see Battery on page 46)
b.
Hard drive (see Hard drive on page 50)
c.
Bluetooth module (see Bluetooth module on page 53)
d.
Optical drive (see Optical drive on page 60)
e.
Keyboard (see Keyboard on page 62)
f.
TouchPad (see TouchPad on page 66)
g.
Switch cover (see Switch cover on page 69)
h.
Fan/heat sink assembly (see Fan/heat sink assembly on page 72)
i.
Graphics card (see Graphics card on page 74)
j.
Processor heat sink (see Heat sink on page 76)
k.
Display assembly (see Display assembly on page 79)
l.
Top cover (see Top cover on page 85)
m.
Speaker assembly (see Speaker assembly on page 87)
When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
●
Memory modules (see Primary memory module on page 54 and Expansion memory module
on page 65)
●
WLAN module (see WLAN module on page 56)
●
RTC battery (see RTC battery on page 59)
●
Modem module (see Modem module on page 68)
Component replacement procedures
89
●
Processor (see Processor on page 77)
●
PC Card assembly (see PC Card assembly on page 94)
Remove the system board:
1.
Turn the computer upside down, with the front toward you.
2.
Remove the Torx T8M2.5×4.0 screw that secures the system board to the base enclosure.
3.
Turn the computer right-side up, with the front toward you.
4.
Disconnect the following cables from the system board:
(1) RJ-45 connector cable
(2) Modem module cable
(3) Bluetooth module cable
(4) USB/audio board cable
5.
90
Remove the modem module cable (5) from the clip in the system board.
Chapter 4 Removal and replacement procedures
6.
Remove the two Torx T8M2.5×7.0 screws (1) that secure the system board to the base
enclosure.
7.
Use the optical drive connector (2) to lift the right side of the system board (3) until it rests at an
angle.
8.
Remove the system board (4) by sliding it away from the base enclosure at an angle.
9.
If it is necessary to replace the Bluetooth module cable, remove the cable (1) from the clips (2)
and (3) built into the base enclosure. The Bluetooth module cable is included in the Cable Kit,
spare part number 450486-001.
Component replacement procedures
91
10. If it is necessary to replace the microphone extension cable, disconnect the cable (1), push the
cable from the clips (2), and remove the cable(3). The microphone extension cable is available
using spare part number 450578-001.
11. If it is necessary to replace the RJ-11 connector cable, remove the RJ-11 connector (1) from the
clip built into the base enclosure.
12. Remove the RJ-11 connector cable (2) from the clips and routing channel built into the base
enclosure. The RJ-11 connector cable is included in the Cable Kit, spare part number
450486-001.
13. If it is necessary to replace the RJ-45 connector cable, remove the RJ-45 connector (1) from the
clip built into the base enclosure. The RJ-45 connector cable is included in the Cable Kit, spare
part number 450486-001
92
Chapter 4 Removal and replacement procedures
14. Remove the RJ-45 connector cable (2) from the clips and routing channel built into the base
enclosure.
Reverse the preceding procedure to install the system board, Bluetooth module cable, microphone
extension cable, RJ-11 cable, and RJ-45 cable.
USB/audio board
Description
Spare part number
USB/audio board (includes 2-into-1 USB board cable and audio board cable)
450483-001
Before removing the USB/audio board, follow these steps:
1.
Battery (see Battery on page 46)
2.
Hard drive (see Hard drive on page 50)
3.
Bluetooth module (see Bluetooth module on page 53)
4.
Optical drive (see Optical drive on page 60)
5.
Keyboard (see Keyboard on page 62)
6.
TouchPad (see TouchPad on page 66)
7.
Switch cover (see Switch cover on page 69)
8.
Fan/heat sink assembly (see Fan/heat sink assembly on page 72)
9.
Graphics card (see Graphics card on page 74)
10. Processor heat sink (see Heat sink on page 76)
11. Display assembly (see Display assembly on page 79)
12. Top cover (see Top cover on page 85)
Component replacement procedures
93
13. Speaker assembly (see Speaker assembly on page 87)
14. System board (see System board on page 89)
Remove the USB/audio board:
1.
Remove the USB/audio board cables (1) from the clips (2) built into the base enclosure.
2.
Remove the Torx T8M2.5×4.0 screw (3) that secures the USB/audio board to the base
enclosure.
3.
Lift the left side of the USB/audio board (4) until the USB and audio connectors disengage from
the openings in the base enclosure.
4.
Remove the USB/audio board and cables from the base enclosure.
Reverse this procedure to install the USB/audio board.
PC Card assembly
Description
Spare part number
PC Card assembly
450584-001
Before removing the PC Card assembly, follow these steps:
94
1.
Battery (see Battery on page 46)
2.
Hard drive (see Hard drive on page 50)
3.
Bluetooth module (see Bluetooth module on page 53)
4.
Optical drive (see Optical drive on page 60)
5.
Keyboard (see Keyboard on page 62)
6.
TouchPad (see TouchPad on page 66)
7.
Switch cover (see Switch cover on page 69)
Chapter 4 Removal and replacement procedures
8.
Fan/heat sink assembly (see Fan/heat sink assembly on page 72)
9.
Graphics card (see Graphics card on page 74)
10. Processor heat sink (see Heat sink on page 76)
11. Display assembly (see Display assembly on page 79)
12. Top cover (see Top cover on page 85)
13. Speaker assembly (see Speaker assembly on page 87)
14. System board (see System board on page 89)
Remove the PC Card assembly:
1.
Turn the system board upside down, with the PC Card eject button toward you.
2.
Remove the four Phillips PM2.0×4.0 screws that secure the PC Card assembly to the system
board.
3.
Remove the PC Card assembly from the system board.
Reverse this procedure to install the PC Card assembly.
Component replacement procedures
95
5
Computer Setup
Starting Computer Setup
Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating
system is not working or will not load.
NOTE: Some of the Computer Setup menu items listed in this guide may not be supported by your
computer.
NOTE: Pointing devices are not supported in Computer Setup. You must use the keyboard to
navigate and make selections.
NOTE: An external keyboard and pointing stick connected by USB can be used with Computer
Setup only if USB legacy support is enabled.
To start Computer Setup:
96
1.
Turn on or restart the computer.
2.
Before Windows® opens and while the "F10 = ROM Based Setup" message is displayed in the
lower-left corner of the screen, press f10.
Chapter 5 Computer Setup
Using Computer Setup
Navigating and selecting in Computer Setup
The information and settings in Computer Setup are accessed from the File, Security, Diagnostics,
and System Configuration menus.
1.
Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the
"F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.
Because Computer Setup is not Windows-based, it does not support the TouchPad. Navigation
and selection are by keystroke:
●
To choose a menu or a menu item, use the arrow keys.
●
To select an item, press enter.
●
To close open dialog boxes and return to the main Computer Setup screen, press esc.
●
To view navigation information, press f1.
●
To change the language, press f2.
2.
Select the File, Security, Diagnostics, or System Configuration menu.
3.
To exit Computer Setup, choose one of the following methods:
●
To exit Computer Setup without saving your preferences, use the arrow keys to select File
> Ignore Changes and Exit. Then follow the instructions on the screen.
●
To save your preferences and exit Computer Setup, use the arrow keys to select File >
Save Changes and Exit. Then follow the instructions on the screen.
Your preferences go into effect when the computer restarts.
Restoring factory settings in Computer Setup
To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1.
Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the
"F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select File > Restore defaults, and then press enter.
3.
When the confirmation dialog box opens, press f10.
4.
To save your preferences and exit Computer Setup, use the arrow keys to select File > Save
Changes and Exit. Then follow the instructions on the screen.
Your preferences go into effect when the computer restarts.
NOTE: Your password settings and security settings are not changed when you restore the factory
settings.
Using Computer Setup
97
Computer Setup menus
The menu tables in this section provide an overview of Computer Setup options.
NOTE: Some of the Computer Setup menu items listed in this chapter may not be supported by
your computer.
File menu
98
Select
To do this
System information
●
View identification information for the computer and the batteries in the
system.
●
View specification information for the processor, cache and memory size,
system ROM, video revision, and keyboard and pointing stick controller
version.
Restore defaults
Replace the configuration settings in Computer Setup with the original factory
settings. (Password settings and security settings are not changed when you
restore the factory settings.)
Ignore changes and exit
Cancel any changes entered during the current session. Then exit and restart
the computer.
Save changes and exit
Save any changes entered during the current session. Then exit and restart the
computer. Your changes go into effect when the computer restarts.
Chapter 5 Computer Setup
Security menu
Select
To do this
Setup password
Enter, change, or delete a setup password.
Power-On password
Enter, change, or delete a power-on password.
Password options
●
Enable/disable stringent security.
●
Enable/disable password requirement on computer restart.
●
Enable/disable DriveLock on any computer hard drive.
●
Change a DriveLock user password or master password.
DriveLock passwords
NOTE: DriveLock settings are accessible only when you enter Computer
Setup by turning on (not restarting) the computer.
Smart Card security
Enable/disable support for smart card and Java™ Card power-on
authentication.
NOTE: Power-on authentication for smart cards is supported only on
computers with optional smart card readers.
NOTE:
TPM Embedded Security
You must have an administrator password to change this setting.
Enable/disable support for Trusted Platform Module (TPM) Embedded Security,
which protects the computer from unauthorized access to owner functions
available in Embedded Security for ProtectTools. For more information, refer to
the ProtectTools software Help.
NOTE:
You must have a setup password to change this setting.
System IDs
Enter user-defined and pointing stick computer asset tracking number and
ownership tag.
Disk Sanitizer
Run Disk Sanitizer to destroy all existing data on the primary hard drive. The
following options are available:
●
Fast: Runs the Disk Sanitizer erase cycle once.
●
Optimum: Runs the Disk Sanitizer erase cycle 3 times.
●
Custom: Allows you to select the desired number of Disk Sanitizer erase
cycles from a list.
CAUTION: If you run Disk Sanitizer, the data on the primary hard drive is
destroyed permanently.
Diagnostics menu
Select
To do this
Hard Drive Self-Test options
Run a comprehensive self-test on any hard drive in the system.
Memory Check
Run a comprehensive check on system memory.
Startup Check (select models only)
Verify the system components needed for starting the computer.
Computer Setup menus
99
System Configuration menu
NOTE:
Some of the listed System Configuration options may not be supported by your computer.
Select
To do this
Language (or press f2)
Change the Computer Setup language.
Boot options
●
Set f9, f10, and f12 delay when starting up.
●
Enable/disable CD-ROM boot.
●
Enable/disable floppy boot.
●
Enable/disable internal network adapter boot and set the boot mode (PXE
or RPL).
●
Enable/disable MultiBoot, which sets a boot order that can include most
boot devices in the system.
●
Set the Express Boot Popup delay in seconds.
●
Set the boot order.
●
Swap the functions of the fn key and left ctrl key.
●
Enable/disable multiple standard pointing devices at startup. (To set the
computer to support only a single, usually nonstandard, pointing device at
startup, select Disable.)
●
Enable/disable USB legacy support. When enabled, USB legacy support
allows the following:
Device configurations
100 Chapter 5 Computer Setup
◦
Use of a USB keyboard, mouse, and hub in Computer Setup even
when a Windows operating system is not running.
◦
Startup from bootable USB devices, including a hard drive, diskette
drive, or optical drive connected by a USB port to the computer or to
an optional docking device (select models only).
●
Select a parallel port mode: EPP (Enhanced Parallel Port), standard,
bidirectional, or ECP (Enhanced Capabilities Port).
●
Enable/disable BIOS DMA data transfers.
●
Enable/disable fan always on while connected to an AC outlet.
●
Enable/disable Intel® Data Execution Prevention or AMD® PSAE
Execution Disable. When enabled, the processor can disable some virus
code execution, which helps to improve computer security.
●
Enable/disable LAN Power Save. When enabled, saves power by turning
off the LAN when not in use.
●
Enable/disable SATA Native Mode.
●
Enable/disable Dual Core CPU.
●
Enable/disable Secondary Battery Fast Charge.
●
Choose Bit-shift or LBA assisted HDD Translation Mode.
●
Enable/disable Windows direct application launcher.
●
Enable/disable HP Lockout.
Select
To do this
Built-In Device Options
●
Enable/disable embedded WWAN Device Radio.
●
Enable/disable embedded WLAN Device Radio.
●
Enable/disable embedded Bluetooth® Device Radio.
●
Enable/disable LAN/WLAN Switching. When enabled, switches to a WLAN
when a LAN is either unavailable or disconnected.
●
Enable/disable Wake on LAN from Off.
●
Enable/disable the ambient light sensor.
●
Enable/disable the serial port.
●
Enable/disable the parallel port.
●
Enable/disable the flash media reader.
●
Enable/disable the USB port.
Port Options
CAUTION: Disabling the USB port also disables MultiBay II devices and
ExpressCard devices on the advanced port replicator.
●
Enable/disable the 1394 port.
●
Enable/disable the cardbus slot.
●
Enable/disable the ExpressCard slot.
●
Enable/disable the infrared port.
●
Enable/disable the optical disk drive.
●
Enable/disable the network controller.
Computer Setup menus 101
6
Specifications
Computer specifications
Metric
U.S.
Length
27.5 cm
10.8 in
Width
39.3 cm
15.5 in
Height (front to rear)
3.3 to 3.9 cm
1.3 to 1.5 in
Weight (equipped with 8-cell battery, 80-GB/5400-rpm hard
drive, optical drive, one 1024-MB memory module, WLAN
module, pointing stick, TouchPad, and nVidia GM84
graphics card; varies by configuration)
3.4 kg
7.5 lbs
Dimensions
Input power
Operating voltage
19.0 V dc @ 4.74 A – 120 W
Operating current
4.74 A
Temperature
Operating (not writing to optical disc)
0°C to 35°C
32°F to 95°F
Operating (writing to optical disc)
5°C to 35°C
41°F to 95°F
Nonoperating
-20°C to 60°C
-4°F to 140°F
Relative humidity
Operating
10% to 90%
Nonoperating
5% to 95%
Maximum altitude (unpressurized)
Operating (14.7 to 10.1 psia)
-15 m to 3,048 m
-50 ft to 10,000 ft
Nonoperating (14.7 to 4.4 psia)
-15 m to 12,192 m
-50 ft to 40,000 ft
Shock
Operating
125 g, 2 ms, half-sine
Nonoperating
200 g, 2 ms, half-sine
Random vibration
Operating
102 Chapter 6 Specifications
0.75 g zero-to-peak, 10 Hz to 500 Hz, 0.25 oct/min sweep
rate
Metric
Nonoperating
U.S.
1.50 g zero-to-peak, 10 Hz to 500 Hz, 0.5 oct/min sweep rate
NOTE: Applicable product safety standards specify thermal limits for plastic surfaces. The computer operates well within
this range of temperatures.
17.0-inch, WUXGA+WVA display specifications
Metric
U.S.
Height
24.4 cm
9.65 in
Width
38.1 cm
15.0 in
Diagonal
43.2 cm
17.0 in
Number of colors
Up to 16.8 million
Contrast ratio
200:1 (typical)
Brightness
180 nits (typical)
Dimensions
Pixel resolution
Pitch
0.172 × 0.172 mm
Format
1920 × 1200
Configuration
RGB vertical stripe
Backlight
CCFT
Character display
80 × 25
Total power consumption
6.0 W
Viewing angle
+/-65 horizontal, +/-50° vertical (typical)
17.0-inch, WUXGA+WVA display specifications 103
17.0-inch, WSXGA+WVA display specifications
Metric
U.S.
Height
24.4 cm
9.6 in
Width
38.1 cm
15.0 in
Diagonal
43.2 cm
17.0 in
Number of colors
Up to 16.8 million
Contrast ratio
200:1 (typical)
Brightness
180 nits (typical)
Dimensions
Pixel resolution
Pitch
0.172 × 0.172 mm
Format
1680 × 1050
Configuration
RGB vertical stripe
Backlight
CCFT
Character display
80 × 25
Total power consumption
7.0 W
Viewing angle
+/-60 horizontal, +40/-50° vertical (typical)
104 Chapter 6 Specifications
17.0-inch, WXGA+WVA display specifications
Metric
U.S.
Height
24.4 cm
9.6 in
Width
38.1 cm
15.0 in
Diagonal
43.2 cm
17.0 in
Number of colors
Up to 16.8 million
Contrast ratio
200:1 (typical)
Brightness
180 nits (typical)
Dimensions
Pixel resolution
Pitch
0.259 × 0.259 mm
Format
1440× 900
Configuration
RGB vertical stripe
Backlight
CCFT
Character display
80 × 25
Total power consumption
6.5 W
Viewing angle
+/-45° horizontal, +15/-35° vertical (typical)
17.0-inch, WXGA+WVA display specifications 105
Hard drive specifications
250-GB*
200-GB*
160-GB*
120-GB*
100-GB*
80-GB*
Height
9.5 mm
9.5 mm
9.5 mm
9.5 mm
9.5 mm
9.5 mm
Width
70 mm
70 mm
70 mm
70 mm
70 mm
70 mm
Weight
101 g
101 g
101 g
101 g
101 g
101 g
Interface type
SATA
SATA
SATA
SATA
SATA
SATA
Transfer rate
100 MB/sec
100 MB/sec
100 MB/sec
100 MB/sec
100 MB/sec
100 MB/sec
Security
ATA security
ATA security
ATA security
ATA security
ATA security
ATA security
Dimensions
Seek times (typical read, including setting)
Single track
3 ms
3 ms
3 ms
3 ms
3 ms
3 ms
Average
13 ms
13 ms
13 ms
13 ms
13 ms
13 ms
Maximum
24 ms
24 ms
24 ms
24 ms
24 ms
24 ms
Logical blocks
488,376,120
390,700,080
312,560,340
234,420,480
195,350,400
156,280,320
Disk rotational speed
5400 rpm
7200 and
5400 rpm
7200 and
5400 rpm
7200 and
5400 rpm
7200 and
5400 rpm
7200 and
5400 rpm
Operating temperature
5°C to 55°C (41°F to 131°F)
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive
specifications may differ slightly.
NOTE: Certain restrictions and exclusions apply. Contact technical support for details.
106 Chapter 6 Specifications
DVD±RW and CD-RW Double-Layer Combo Drive
specifications
Applicable disc
Center hole diameter
Read:
Write:
CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CDROM, CD-ROM XA, MIXED MODE CD, CD-I,
CD-I Bridge (Photo-CD, Video CD),
Multisession CD (Photo-CD, CD-EXTRA,
Portfolio, CD-R, CD-RW), CD-R, CD-RW, DVDROM (DVD-5, DVD-9, DVD-10, DVD-18), DVDR, DVD-RW, DVD+R, DVD+RW, DVD-RAM
CD-R and CD-RW
DVD+R, DVD+RW, DVD-R, DVDRW, DVD-RAM
1.5 cm (0.59 in)
Disc diameter
Standard disc
12 cm (4.72 in)
Mini disc
8 cm (3.15 in)
Disc thickness
1.2 mm (0.047 in)
Track pitch
0.74 µm
Access time
CD
DVD
Random
< 175 ms
< 230 ms
Full stroke
< 285 ms
< 335 ms
Audio output level
Line-out, 0.7 Vrms
Cache buffer
2 MB
Data transfer rate
24X CD-ROM
3,600 KB/sec
8X DVD-ROM
10,800 KB/sec
24X CD-R
3,600 KB/sec
16X CD-RW
2,400 KB/sec
8X DVD+R
10,800 KB/sec
4X DVD+RW
5,400 KB/sec
8X DVD-R
10,800 KB/sec
4X DVD-RW
5,400 KB/sec
2.4X DVD+R(9)
2,700 KB/sec
5X DVD-RAM
6,750 KB/sec
Transfer mode
Multiword DMA Mode
Startup time
< 15 seconds
Stop time
< 6 seconds
DVD±RW and CD-RW Double-Layer Combo Drive specifications 107
DVD/CD-RW Combo Drive specifications
Applicable disc
Center hole diameter
Read:
Write:
CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CDROM, CD-ROM XA, MIXED MODE CD, CD-I,
CD-I Bridge (Photo-CD, Video CD),
Multisession CD (Photo-CD, CD-EXTRA,
Portfolio, CD-R, CD-RW), CD-R, CD-RW, DVDROM (DVD-5, DVD-9, DVD-10, DVD-18), DVDR, DVD-RW, DVD+R, DVD+RW, DVD-RAM
CD-R and CD-RW
1.5 cm (0.59 in)
Disc diameter
Standard disc
12 cm (4.72 in)
Mini disc
8 cm (3.15 in)
Disc thickness
1.2 mm (0.047 in)
Track pitch
0.74 µm
Access time
CD
DVD
Random
< 110 ms
< 130 ms
Full stroke
< 210 ms
< 225 ms
Audio output level
Line-out, 0.7 Vrms
Cache buffer
2 MB
Data transfer rate
24X CD-ROM
3,600 KB/sec
8X DVD
3,600 KB/sec
24X CD-R
3,600 KB/sec
24X CD-RW
3,600 KB/sec
Transfer mode
Multiword DMA mode 2
Startup time
< 15 seconds
Stop time
< 6 seconds
108 Chapter 6 Specifications
DVD-ROM Drive
Applicable disc
DVD-ROM (DVD-5, DVD-9, DVD-10, DVD-18, CD-ROM (Mode 1 and 2), CD Digital
Audio, CD-XA ready (Mode 2, Form 1 and Form 2), CD-I (Mode 2, Form 1 and Form
2), CD-R, CD-RW, Photo CD (single and multisession), CD-Bridge
Center hole diameter
1.5 cm (0.59 in)
Disc diameter
Standard disc
12 cm (4.72 in)
Mini disc
8 cm (3.15 in)
Disc thickness
1.2 mm (0.047 in)
Track pitch
0.74 µm
Access time
CD
DVD
Random
< 100 ms
< 125 ms
Full stroke
< 175 ms
< 225 ms
Audio output level
Line-out, 0.7 Vrms
Cache buffer
512 KB
Data transfer rate
CD-R (24X)
3600 KB/s (150 KB/s at 1X CD rate)
CD-RW (10X)
1500 KB/s (150 KB/s at 1X CD rate)
CD-ROM (24X)
3600 KB/s (150 KB/s at 1X CD rate)
DVD (8X)
10,800 KB/s (1,352 KB/s at 1X DVD rate)
Multiword DMA mode 2
16.6 MB/s
Startup time
< 10 seconds
Stop time
< 3 seconds
DVD-ROM Drive 109
System DMA specifications
Hardware DMA
System function
DMA0
Not applicable
DMA1*
Not applicable
DMA2*
Not applicable
DMA3
Not applicable
DMA4
Direct memory access controller
DMA5*
Available for PC Card
DMA6
Not assigned
DMA7
Not assigned
*PC Card controller can use DMA 1, 2, or 5.
System memory map specifications
Size
Memory address
System function
640 KB
00000000-0009FFFF
Base memory
128 KB
000A0000-000BFFFF
Video memory
48 KB
000C0000-000CBFFF
Video BIOS
160 KB
000C8000-000E7FFF
Unused
64 KB
000E8000-000FFFFF
System BIOS
15 MB
00100000-00FFFFFF
Extended memory
58 MB
04800000-07FFFFFF
Super extended memory
58 MB
04800000-07FFFFFF
Unused
2 MB
08000000-080FFFFF
Video memory (direct access)
4 GB
08200000-FFFEFFFF
Unused
64 KB
FFFF0000-FFFFFFFF
System BIOS
110 Chapter 6 Specifications
System interrupt specifications
Hardware IRQ
System function
IRQ0
System timer
IRQ1
Standard 101-/102-Key or Microsoft® Natural Keyboard
IRQ2
Cascaded
IRQ3
Intel 82801DB/DBM USB2 Enhanced Host Controller—24CD
IRQ4
COM1
IRQ5*
Conexant AC—Link Audio Intel 82801DB/DBM SMBus Controller—24C3 Data Fax
Modem with SmartCP
IRQ6
Diskette drive
IRQ7*
Parallel port
IRQ8
System CMOS/real-time clock
IRQ9*
Microsoft ACPI-compliant system
IRQ10*
Intel USB UHCI controller—24C2
Intel 82852/82855 GM/GME Graphic Controller
Realtek RTL8139 Family PCI Fast Ethernet Controller
IRQ11
Intel USB EHCI controller—24CD
Intel USB UHCI controller—24C4
Intel USB UHCI controller—24C7
Intel Pro/Wireless 2200BG
TI OHCI 1394 host controller
TI PCI1410 CardBus controller
IRQ12
Synaptics PS/2 TouchPad
IRQ13
Numeric data processor
IRQ14
Primary IDE channel
IRQ15
Secondary IDE channel
*Default configuration; audio possible configurations are IRQ5, IRQ7, IRQ9, IRQ10, or none.
NOTE: PC Cards may assert IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10, IRQ11, or IRQ15. Either the infrared or the serial
port may assert IRQ3 or IRQ4.
System interrupt specifications 111
System I/O address specifications
I/O address (hex)
System function (shipping configuration)
000 - 00F
DMA controller no. 1
010 - 01F
Unused
020 - 021
Interrupt controller no. 1
022 - 024
Opti chipset configuration registers
025 - 03F
Unused
02E - 02F
87334 “Super I/O” configuration for CPU
040 - 05F
Counter/timer registers
044 - 05F
Unused
060
Keyboard controller
061
Port B
062 - 063
Unused
064
Keyboard controller
065 - 06F
Unused
070 - 071
NMI enable/RTC
072 - 07F
Unused
080 - 08F
DMA page registers
090 - 091
Unused
092
Port A
093 - 09F
Unused
0A0 - 0A1
Interrupt controller no. 2
I/O Address (hex)
System Function (shipping configuration)
0A2 - 0BF
Unused
0C0 - 0DF
DMA controller no. 2
0E0 - 0EF
Unused
0F0 - 0F1
Coprocessor busy clear/reset
0F2 - 0FF
Unused
100 - 16F
Unused
170 - 177
Secondary fixed disk controller
178 - 1EF
Unused
1F0 - 1F7
Primary fixed disk controller
1F8 - 200
Unused
201
JoyStick (decoded in ESS1688)
202 - 21F
Unused
112 Chapter 6 Specifications
I/O address (hex)
System function (shipping configuration)
220 - 22F
Entertainment audio
230 - 26D
Unused
26E - 26
Unused
278 - 27F
Unused
280 - 2AB
Unused
2A0 - 2A7
Unused
2A8 - 2E7
Unused
2E8 - 2EF
Reserved serial port
2F0 - 2F7
Unused
2F8 - 2FF
Infrared port
300 - 31F
Unused
320 - 36F
Unused
370 - 377
Secondary diskette drive controller
378 - 37F
Parallel port (LPT1/default)
380 - 387
Unused
388 - 38B
FM synthesizer—OPL3
38C - 3AF
Unused
3B0 - 3BB
VGA
3BC - 3BF
Reserved (parallel port/no EPP support)
3C0 - 3DF
VGA
3E0 - 3E1
PC Card controller in CPU
3E2 - 3E3
Unused
3E8 - 3EF
Internal modem
3F0 - 3F7
“A” diskette controller
3F8 - 3FF
Serial port (COM1/default)
CF8 - CFB
PCI configuration index register (PCIDIVO-1)
CFC - CFF
PCI configuration data register (PCIDIVO-1)
System I/O address specifications 113
7
Screw listing
This section provides specification and reference information for the screws and screw locks used in
the computer. All screws listed in this section are available in the Screw Kit, spare part number
450591-001, and the Display Screw Kit, spare part number 450574-001.
114 Chapter 7 Screw listing
Phillips PM2.0×17.0 captive screw
Color
Quantity
Length
Thread
Head diameter
Black
2
17.0 mm
2.0 mm
5.0 mm
Where used: 2 captive screws that secure the hard drive cover to the computer (screws are captured
on the cover by C-clips)
Phillips PM2.0×17.0 captive screw 115
Phillips PM2.5×13.0 captive screw
Color
Quantity
Length
Thread
Head diameter
Black
1
13.0 mm
2.5 mm
5.0 mm
Where used: One captive screw that secures the hard drive to the computer (screw is captured on
the hard drive bracket)
116 Chapter 7 Screw listing
Phillips PM3.0×4.0 screw
Color
Quantity
Length
Thread
Head diameter
Black
4
4.0 mm
3.0 mm
5.0 mm
Where used: 4 screws that secure the hard drive bracket to the hard drive
Phillips PM3.0×4.0 screw 117
Phillips PM2.5×5.0 captive screw
Color
Quantity
Length
Thread
Head diameter
Black
3
5.0 mm
2.5 mm
5.0 mm
Where used: 3 captive screws that secure the memory module/WLAN module compartment cover to
the computer (screws are captured on the cover by C-clips)
118 Chapter 7 Screw listing
Phillips PM2.0×4.0 screw
Color
Quantity
Length
Thread
Head diameter
Silver
18
4.0 mm
2.0 mm
4.5 mm
Where used: 2 screws that secure the WLAN module to the system board
Where used: 2 screws that secure the optical drive bracket to the optical drive
Phillips PM2.0×4.0 screw 119
Where used: 2 screws that secure the modem module to the system board
Where used: 8 screws that secure the display hinges to the display panel
Where used: 4 screws that secure the PC Card assembly to the system board
120 Chapter 7 Screw listing
Torx TM2.5×9.0 screw
Color
Quantity
Length
Thread
Head diameter
Black
21
9.0 mm
2.5 mm
5.0 mm
Where used:
(1) One screw that secures the optical drive to the computer
(2) One screw that secures the TouchPad to the computer
(3) Five screws that secure the display assembly to the computer
Torx TM2.5×9.0 screw 121
Where used: 14 screws that secure the top cover to the computer
122 Chapter 7 Screw listing
Torx TM2.5×4.0 screw
Color
Quantity
Length
Thread
Head diameter
Black
16
4.0 mm
2.5 mm
4.5 mm
Where used: 4 screws that secure the switch cover to the base enclosure
Where used: One screw that secures the power button board to the switch cover
Torx TM2.5×4.0 screw 123
Where used: 2 screws that secure the display assembly to the computer
Where used: 4 screws that secure the display panel to the display enclosure
Where used:
(1) Two screws that secure the display panel to the display enclosure
(2) One screw that secures the ambient light sensor to the display enclosure
(3) One screw that secures the display inverter to the display enclosure
124 Chapter 7 Screw listing
Where used: One screw that secures the system board to the base enclosure
Torx TM2.5×4.0 screw 125
Phillips PM2.5×9.0 captive screw
Color
Quantity
Length
Thread
Head diameter
Black
4
9.0 mm
2.5 mm
5.0 mm
Where used: 3 captive screws that secure the keyboard to the computer
126 Chapter 7 Screw listing
Torx T8M2.5×7.0 screw
Color
Quantity
Length
Thread
Head diameter
Black
9
7.0 mm
2.5 mm
5.0 mm
Where used: One screw that secures the fan/heat sink assembly to the computer
Where used: 2 screws that secure the display panel to the display enclosure
Torx T8M2.5×7.0 screw 127
Where used: 3 screws that secure the top cover to the base enclosure
Where used: 2 screws that secure the system board to the base enclosure
Where used: One screw that secures the USB/audio board to the base enclosure
128 Chapter 7 Screw listing
Phillips PM2.5×7.0 screw
Color
Quantity
Length
Thread
Head diameter
Silver
6
7.0 mm
2.5 mm
5.0 mm
Where used: 6 screws that secure the display bezel to the display enclosure
Phillips PM2.5×7.0 screw 129
Torx T8M2.0×10.0 captive screw
Color
Quantity
Length
Thread
Head diameter
Black
4
10.0 mm
2.0 mm
5.0 mm
Where used: 4 captive screws that secure the fan/heat sink assembly to the system board
130 Chapter 7 Screw listing
Hex Metric HM5.0×10.0 standoff
Color
Quantity
Length
Thread
Head diameter
Silver
2
10.0 mm
2.5 mm
5.0 mm
Where used: 2 standoffs that secure the graphics card to the system board
Hex Metric HM5.0×10.0 standoff 131
Phillips PM2.5×7.0 captive screw
Color
Quantity
Length
Thread
Head diameter
Black
4
7.0 mm
2.5 mm
5.0 mm
Where used: 4 captive screws that secure the processor heat sink to the base enclosure
132 Chapter 7 Screw listing
Phillips PM2.0×6.0 screw
Color
Quantity
Length
Thread
Head diameter
Silver
2
6.0 mm
2.0 mm
5.0 mm
Where used: 2 screws that secure the display bezel to the display enclosure
Phillips PM2.0×6.0 screw 133
8
Backup and recovery
Backup and recovery using Windows Vista
Creating recovery discs
After setting up the computer for the first time, be sure to create a set of recovery discs of the full
factory image. The recovery discs are used to start up (boot) the computer and recover the operating
system and software to factory settings in case of system instability or failure.
Note the following guidelines before creating recovery discs:
●
Use any of the following types of discs: CD-R, DVD+R, DVD+R DL, DVD-R, or DVD-R DL
(purchased separately). The discs you use will depend on the type of optical drive installed in
your computer. Because DVDs store more information than CDs, DVDs and DVDs with doublelayer (DL) support reduce the number of discs required.
NOTE: Read-write discs, such as CD-RW, DVD+RW, and DVD-RW, are not compatible with
the HP Backup & Recovery Manager software.
●
The computer must be connected to AC power during the process.
●
Only one set of the recovery discs can be created per computer.
●
Number each disc before inserting it into the optical drive of the computer.
●
If necessary, you can cancel the disc creation before you have finished and pointing stick
creating the recovery discs. The next time you select Create a set of recovery discs
(Recommended), you will be prompted to continue the disc creation.
To create a set of recovery discs:
1.
Select Start > All Programs > HP Backup & Recovery > Backup & Recovery Manager.
2.
Click Next.
3.
Click Create a set of recovery discs (Recommended), and then click Next.
4.
Follow the on-screen instructions.
Backing up your information
NOTE: You can only recover files that you have previously backed up. HP recommends that you
use HP Backup & Recovery Manager to create an entire drive backup as soon as you set up your
computer.
134 Chapter 8 Backup and recovery
With HP Backup & Recovery Manager, you can perform the following tasks:
●
Backing up your information regularly to protect your important system files
●
Creating system recovery points that allow you to reverse undesireable changes to your
computer by restoring the computer to an earlier state
●
Scheduling backups at specific intervals or events
When to back up
●
On a regularly scheduled basis
NOTE: Set reminders to back up your information periodically.
●
Before the computer is repaired or restored
●
Before you add or modify hardware or software
Backup suggestions
●
Create a set of recovery discs using HP Backup & Recovery Manager.
●
Create system recovery points using HP Backup & Recovery Manager, and periodically copy
them to disc.
●
Store personal files in the Documents folder and back up these folders periodically.
●
Back up templates stored in their associated programs.
●
Save customized settings in a window, toolbar, or menu bar by taking a screen shot of your
settings.
The screen shot can be a time saver if you have to reset your preferences.
To copy the screen and paste it into a word-processing document:
a.
Display the screen.
b.
Copy the screen.
To copy only the active window, press alt+fn+prt sc.
To copy the entire screen, press fn+prt sc.
c.
Open a word-processing document, and then select Edit > Paste.
NOTE: Before you can perform backup and recovery procedures, the computer must be connected
to external power.
NOTE: Drivers, utilities, and applications installed by HP can be copied to a CD or to a DVD using
HP Backup & Recovery Manager.
Backing up specific files or folders
You can back up specific files or folders to the recovery partition on the hard drive, to an optional
external hard drive, or to optical discs (CDs or DVDs).
Backup and recovery using Windows Vista 135
NOTE: This process will take several minutes, depending on the file size and the speed of the
computer.
To back up specific files or folders:
1.
Select Start > All Programs > HP Backup & Recovery > Backup & Recovery Manager.
2.
Click Next.
3.
Click Create or manage backups, and then click Next.
4.
Click Back up user created files and folders, and then click Next.
5.
Follow the on-screen instructions.
Backing up the entire hard drive
When you perform a complete backup of the hard drive, you are saving the full factory image,
including the Windows® operating system, software applications, and all personal files and folders.
NOTE: A copy of the entire hard drive image can be stored on another hard drive, on a network
drive, or on recovery discs that you create.
NOTE: This process may take over an hour, depending on your computer speed and the amount of
data being stored.
To back up your entire hard drive:
1.
Select Start > All Programs > HP Backup & Recovery > Backup & Recovery Manager.
2.
Click Next.
3.
Click Create or manage backups, and then click Next.
4.
Click Create or manage Entire Drive Backups, and then click Next.
5.
Follow the on-screen instructions.
136 Chapter 8 Backup and recovery
Creating recovery points
When you back up modifications since your last backup, you are creating system recovery points.
This allows you to save a snapshot of your hard drive at a specific point in time. You can then recover
back to that point if you want to reverse subsequent changes made to your system.
NOTE: The first system recovery point, a snapshot of the entire image, is automatically created the
first time you perform a backup. Subsequent recovery points make copies of changes made after that
time.
HP recommends that you create recovery points at the following times:
●
Before you add or extensively modify software or hardware
●
Periodically, whenever the system is performing optimally
NOTE: Recovering to an earlier recovery point does not affect data files or e-mails created since
that recovery point.
To create a system recovery point:
1.
Select Start > All Programs > HP Backup & Recovery > Backup & Recovery Manager.
2.
Click Next.
3.
Click Create or manage backups, and then click Next.
4.
Click Create or manage Recovery Points, and then click Next.
5.
Follow the on-screen instructions.
Scheduling backups
Use HP Backup Scheduler to schedule backups for the entire system, for recovery points, or for
specific files and folders. With this tool, you can schedule backups at specific intervals (daily, weekly,
or monthly) or at specific events, such as at system restart or when you dock to an optional docking
station (select models only).
To schedule backups:
1.
Select Start > All Programs > HP Backup & Recovery > HP Backup Scheduler.
2.
Follow the on-screen instructions.
Performing a recovery
NOTE: You can only recover files that you have previously backed up. HP recommends that you
use HP Backup & Recovery Manager to create an entire drive backup as soon as you set up your
computer.
HP Backup & Recovery Manager helps you with the following tasks for safeguarding your information
and restoring it in case of a system failure:
●
Recovering important files—This feature helps you reinstall important files without performing a
full system recovery.
●
Performing a full system recovery—With HP Backup & Recovery Manager, you can recover your
full factory image if you experience system failure or instability. HP Backup & Recovery Manager
works from a dedicated recovery partition on the hard drive or from recovery discs you create.
Backup and recovery using Windows Vista 137
Performing a recovery from the recovery discs
To perform a recovery from the recovery discs, follow these steps:
1.
Back up all personal files.
2.
Insert the first recovery disc into the optical drive and restart the computer.
3.
Follow the on-screen instructions.
Performing a recovery from the hard drive
There are 2 ways to initiate a recovery from the hard drive:
●
From within Windows
●
From the recovery partition
138 Chapter 8 Backup and recovery
Initiating a recovery in Windows
To initiate a recovery in Windows, follow these steps:
1.
Back up all personal files.
2.
Select Start > All Programs > HP Backup & Recovery > Backup & Recovery Manager.
3.
Click Next.
4.
Click Perform a recovery, and then click Next.
5.
Follow the on-screen instructions.
Initiating a recovery from the hard drive recovery partition
To initiate a recovery from the hard drive recovery partition, follow these steps:
1.
Back up all personal files.
2.
Restart the computer, and then press f11 before the Windows operating system loads.
3.
Click a recovery option, and then click Next.
4.
Follow the on-screen instructions.
Backup and recovery using Windows Vista 139
Backup and recovery using Windows XP
Creating recovery discs
After setting up the computer for the first time, be sure to create a set of recovery discs of the full
factory image. The recovery discs are used to start up (boot) the computer and recover the operating
system and software to factory settings in case of system instability or failure.
Note the following guidelines before creating recovery discs:
●
Use any of the following types of discs: CD-R, DVD+R, DVD+R DL, DVD-R, or DVD-R DL
(purchased separately). The discs you use will depend on the type of optical drive installed in
your computer. Because DVDs store more information than CDs, DVDs and DVDs with doublelayer (DL) support reduce the number of discs required.
NOTE: Read-write discs, such as CD-RW, DVD+RW, and DVD-RW, are not compatible with
the HP Backup and Recovery Manager software.
●
The computer must be connected to AC power during the process.
●
Only one set of the recovery discs can be created per computer.
●
Number each disc before inserting it into the optical drive of the computer.
●
If necessary, you can cancel the disc creation before you have finished and pointing stick
creating the recovery discs. The next time you select Create factory software recovery CDs or
DVDs to recover the system (Highly recommended), you will be prompted to continue the
disc creation.
To create a set of recovery discs:
1.
Select Start > All Programs > HP Backup & Recovery > HP Backup and Recovery
Manager.
2.
Click Next.
3.
Click Create factory software recovery CDs or DVDs to recover the system (Highly
recommended), and then click Next.
4.
Follow the on-screen instructions.
Backing up your information
NOTE: You can only recover files that you have previously backed up. HP recommends that you
use HP Backup and Recovery Manager to create an entire drive backup as soon as you set up your
computer.
With HP Backup and Recovery Manager, you can perform the following tasks:
●
Backing up your information regularly to protect your important system files
●
Creating system recovery points that allow you to reverse undesireable changes to your
computer by restoring the computer to an earlier state
●
Scheduling backups at specific intervals or events
140 Chapter 8 Backup and recovery
When to back up
●
On a regularly scheduled basis
NOTE: Set reminders to back up your information periodically.
●
Before the computer is repaired or restored
●
Before you add or modify hardware or software
Backup suggestions
●
Create a set of recovery discs using HP Backup and Recovery Manager.
●
Create system recovery points using HP Backup and Recovery Manager, and periodically copy
them to disc.
●
Store personal files in the My Documents folder and back up these folders periodically.
●
Back up templates stored in their associated programs.
●
Save customized settings in a window, toolbar, or menu bar by taking a screen shot of your
settings.
The screen shot can be a time saver if you have to reset your preferences.
To copy the screen and paste it into a word-processing document:
a.
Display the screen.
b.
Copy the screen.
To copy only the active window, press alt+fn+prt sc.
To copy the entire screen, press fn+prt sc.
c.
Open a word-processing document, and then select Edit > Paste.
NOTE: Before you can perform backup and recovery procedures, the computer must be connected
to external power.
NOTE: Drivers, utilities, and applications installed by HP can be copied to a CD or to a DVD using
HP Backup and Recovery Manager.
Backing up specific files or folders
You can back up specific files or folders to the recovery partition on the hard drive, to an optional
external hard drive, or to optical discs (CDs or DVDs).
NOTE: This process will take several minutes, depending on the file size and the speed of the
computer.
To back up specific files or folders:
1.
Select Start > All Programs > HP Backup & Recovery > HP Backup and Recovery
Manager.
2.
Click Next.
3.
Click Back up to protect system settings and important data files, and then click Next.
Backup and recovery using Windows XP 141
4.
Click Back up individual files and folders, and then click Next.
5.
Follow the on-screen instructions.
Backing up the entire hard drive
When you perform a complete backup of the hard drive, you are saving the full factory image,
including the Windows® operating system, software applications, and all personal files and folders.
NOTE: A copy of the entire hard drive image can be stored on another hard drive, on a network
drive, or on recovery discs that you create.
NOTE: This process may take over an hour, depending on your computer speed and the amount of
data being stored.
To back up your entire hard drive:
1.
Select Start > All Programs > HP Backup & Recovery > HP Backup and Recovery
Manager.
2.
Click Next.
3.
Click Back up to protect system settings and important data files, and then click Next.
4.
Click Back up entire hard drive, and then click Next.
5.
Follow the on-screen instructions.
142 Chapter 8 Backup and recovery
Creating recovery points
When you back up modifications since your last backup, you are creating system recovery points.
This allows you to save a snapshot of your hard drive at a specific point in time. You can then recover
back to that point if you want to reverse subsequent changes made to your system.
NOTE: The first system recovery point, a snapshot of the entire image, is automatically created the
first time you perform a backup. Subsequent recovery points make copies of changes made after that
time.
HP recommends that you create recovery points at the following times:
●
Before you add or extensively modify software or hardware
●
Periodically, whenever the system is performing optimally
NOTE: Recovering to an earlier recovery point does not affect data files or e-mails created since
that recovery point.
To create a system recovery point:
1.
Select Start > All Programs > HP Backup & Recovery > HP Backup and Recovery
Manager.
2.
Click Next.
3.
Click Back up to protect system settings and important data files, and then click Next.
4.
Click Create or manage Recovery Points, and then click Next.
5.
Follow the on-screen instructions.
Scheduling backups
Use HP Backup Scheduler to schedule backups for the entire system, for recovery points, or for
specific files and folders. With this tool, you can schedule backups at specific intervals (daily, weekly,
or monthly) or at specific events, such as at system restart or when you dock to an optional docking
station (select models only).
To schedule backups:
1.
Select Start > All Programs > HP Backup & Recovery > HP Backup Scheduler.
2.
Follow the on-screen instructions.
Performing a recovery
NOTE: You can only recover files that you have previously backed up. HP recommends that you
use HP Backup and Recovery Manager to create an entire drive backup as soon as you set up your
computer.
HP Backup and Recovery Manager helps you with the following tasks for safeguarding your
information and restoring it in case of a system failure:
●
Recovering important files—This feature helps you reinstall important files without performing a
full system recovery.
●
Performing a full system recovery—With HP Backup and Recovery Manager, you can recover
your full factory image if you experience system failure or instability. HP Backup and Recovery
Backup and recovery using Windows XP 143
Manager works from a dedicated recovery partition on the hard drive or from recovery discs you
create.
Performing a recovery from the recovery discs
To perform a recovery from the recovery discs, follow these steps:
1.
Back up all personal files.
2.
Insert the first recovery disc into the optical drive and restart the computer.
3.
Follow the on-screen instructions.
Performing a recovery from the hard drive
There are 2 ways to initiate a recovery from the hard drive:
●
From within Windows
●
From the recovery partition
144 Chapter 8 Backup and recovery
Initiating a recovery in Windows
To initiate a recovery in Windows, follow these steps:
1.
Back up all personal files.
2.
Select Start > All Programs > HP Backup & Recovery > HP Backup and Recovery
Manager.
3.
Click Next.
4.
Click Recover important files or the entire system, and then click Next.
5.
Follow the on-screen instructions.
Initiating a recovery from the hard drive recovery partition
To initiate a recovery from the hard drive recovery partition, follow these steps:
1.
Back up all personal files.
2.
Restart the computer, and then press f11 before the Windows operating system loads.
3.
Click a recovery option, and then click Next.
4.
Follow the on-screen instructions.
Backup and recovery using Windows XP 145
9
Connector pin assignments
1394
Pin
Signal
1
Twisted pair B-
2
Twisted pair B+
3
Twisted pair A-
4
Twisted pair A+
Audio-out (headphone)
Pin
Signal
1
Audio out, left channel
2
Audio out, right channel
3
Ground
146 Chapter 9 Connector pin assignments
Audio-in (microphone)
Pin
Signal
1
Audio signal in
2
Audio signal in
3
Ground
External monitor
Pin
Signal
1
Red analog
2
Green analog
3
Blue analog
4
Not connected
5
Ground
6
Ground analog
7
Ground analog
8
Ground analog
9
+5 VDC
10
Ground
11
Monitor detect
12
DDC 2B data
13
Horizontal sync
14
Vertical sync
15
DDC 2B clock
Audio-in (microphone) 147
HDMI
Pin
Signal
1
TMDS data 2+
2
TMDS data 2 shield
3
TMDS data 2–
4
TMDS data 1+
5
TMDS data 1 shield
6
TMDS data 1–
7
TMDS data 0+
8
TMDS data 0 shield
9
TMDS data 0–
10
TMDS clock+
11
TMDS clock shield
12
TMDS clock–
13
CEC
14
No connect
15
DDC clock
16
DDC data
17
Ground
18
+5V power
19
Hot plug detect
20
Shell
148 Chapter 9 Connector pin assignments
RJ-11 (modem)
Pin
Signal
1
Unused
2
Tip
3
Ring
4
Unused
5
Unused
6
Unused
RJ-11 (modem) 149
RJ-45 (network)
Pin
Signal
1
Transmit +
2
Transmit -
3
Receive +
4
Unused
5
Unused
6
Receive -
7
Unused
8
Unused
150 Chapter 9 Connector pin assignments
Universal Serial Bus
Pin
Signal
1
+5 VDC
2
Data -
3
Data +
4
Ground
Universal Serial Bus 151
10 Power cord set requirements
The wide range input feature of the computer permits it to operate from any line voltage from 100 to
120 volts AC or from 220 to 240 volts AC.
The 3-conductor power cord set included with the computer meets the requirements for use in the
country or region where the equipment is purchased.
Power cord sets for use in other countries and regions must meet the requirements of the country or
region where the computer is used.
Requirements for all countries and regions
The requirements listed below are applicable to all countries and regions:
●
The length of the power cord set must be at least 1.5 m (5.0 ft) and no more than 2.0 m (6.5 ft).
●
All power cord sets must be approved by an acceptable accredited agency responsible for
evaluation in the country or region where the power cord set will be used.
●
The power cord sets must have a minimum current capacity of 10 amps and a nominal voltage
rating of 125 or 250 V AC, as required by the power system of each country or region.
●
The appliance coupler must meet the mechanical configuration of an EN 60 320/IEC 320
Standard Sheet C13 connector for mating with the appliance inlet on the back of the computer.
152 Chapter 10 Power cord set requirements
Requirements for specific countries and regions
Country/region
Accredited agency
Applicable note number
Australia
EANSW
1
Austria
OVE
1
Belgium
CEBC
1
Canada
CSA
2
Denmark
DEMKO
1
Finland
FIMKO
1
France
UTE
1
Germany
VDE
1
Italy
IMQ
1
Japan
METI
3
Korea
EK
4
The Netherlands
KEMA
1
Norway
NEMKO
1
The People's Republic of China
CCC
5
Sweden
SEMKO
1
Switzerland
SEV
1
Taiwan
BSMI
4
The United Kingdom
BSI
1
The United States
UL
2
1.
The flexible cord must be Type HO5VV-F, 3-conductor, 1.0-mm² conductor size. Power cord set fittings (appliance
coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region
where it will be used.
2.
The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG, 3-conductor. The wall plug must be a two-pole
grounding type with a NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3.
The appliance coupler, flexible cord, and wall plug must bear a “T” mark and registration number in accordance with the
Japanese Dentori Law. The flexible cord must be Type VCT or VCTF, 3-conductor, 1.00-mm² conductor size. The wall
plug must be a two-pole grounding type with a Japanese Industrial Standard C8303 (7 A, 125 V) configuration.
4.
The flexible cord must be Type RVV, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler
and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it
will be used.
5.
The flexible cord must be Type VCTF, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler
and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it
will be used.
Requirements for specific countries and regions 153
11 Recycling
Battery
When a battery has reached the end of its useful life, do not dispose of the battery in general
household waste. Follow the local laws and regulations in your area for computer battery disposal.
Display
WARNING! The backlight contains mercury. Exercise caution when removing and handling the
backlight to avoid damaging this component and and pointing stick causing exposure to the mercury.
CAUTION: The procedures in this appendix can result in damage to display components. The only
components intended for recycling purposes are the liquid and pointing stick crystal display (LCD)
panel and the backlight. Careful handling must be exercised when removing these components.
When you remove these components, handle them carefully.
NOTE: Materials Disposal. This HP product contains mercury in the backlight in the display
assembly that might require special handling at end-of-life. Disposal of mercury may be regulated
because of environmental considerations. For disposal or recycling information, contact your local
authorities, or see the Electronic Industries Alliance (EIA) Web site at http://www.eiae.org.
This section provides disassembly instructions for the display assembly. The display assembly must
be disassembled to gain access to the backlight (1) and the liquid crystal display (LCD) panel (2).
NOTE: The procedures provided in this appendix are general disassembly instructions. Specific
details, such as screw sizes, quantities, and locations, and and pointing stick component shapes and
sizes, can vary from one computer model to another.
154 Chapter 11 Recycling
Perform the following steps to disassemble the display assembly:
1.
Remove all screw covers (1) and screws (2) that secure the display bezel to the display
assembly.
2.
Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of
the display bezel until the bezel disengages from the display assembly.
3.
Remove the display bezel (3).
Display 155
4.
Disconnect all display panel cables (1) from the display inverter and remove the inverter (2).
5.
Remove all screws (1) that secure the display panel assembly to the display enclosure.
6.
Remove the display panel assembly (2) from the display enclosure.
7.
Turn the display panel assembly upside down.
8.
Remove all screws that secure the display panel frame to the display panel.
9.
Use a sharp-edged tool to cut the tape (1) that secures the sides of the display panel to the
display panel frame.
156 Chapter 11 Recycling
10. Remove the display panel frame (2) from the display panel.
11. Remove the screws (1) that secure the backlight cover to the display panel.
12. Lift the top edge of the backlight cover (2) and swing it outward.
13. Remove the backlight cover.
14. Turn the display panel right-side up.
Display 157
15. Remove the backlight cables (1) from the clip (2) in the display panel.
16. Turn the display panel upside down.
WARNING! The backlight contains mercury. Exercise caution when removing and handling the
backlight to avoid damaging this component and and pointing stick causing exposure to the
mercury.
17. Remove the backlight frame from the display panel.
158 Chapter 11 Recycling
18. Remove the backlight from the backlight frame.
19. Disconnect the display panel cable (1) from the LCD panel.
20. Remove the screws (2) that secure the LCD panel to the display rear panel.
21. Release the LCD panel (3) from the display rear panel.
22. Release the tape (4) that secures the LCD panel to the display rear panel.
23. Remove the LCD panel.
24. Recycle the LCD panel and backlight.
Display 159
Index
Symbols/Numerics
1394 port
location 15
pin assignments 146
A
AC adapter
spare part numbers 37
AC adapter, spare part
numbers 29
AC adapters, spare part
numbers 32
accessory battery connector 17
ambient light sensor 8
ambient light sensor board
removal 47
spare part number 20, 35, 47
antennae
disconnecting 58
locations 8
audio, product description 4
audio-in jack
location 16
pin assignments 147
audio-out jack
location 16
pin assignments 146
B
backing up 134, 140
backup
files and folders 135, 141
hard drive 136, 142
modifications made to the
system 137, 143
scheduling 137, 143
base enclosure, spare part
number 23, 35
battery
location 17
160 Index
removal 46
spare part number 23, 35, 46
battery bay 17
battery latches 17
battery light 11, 14
Bluetooth module
removal 53
spare part number 23, 35, 53
Bluetooth module cable
illustrated 28
removal 91
boot options 100
boot order 100
bottom components 17
buttons
calculator 10
info 9
power 9
presentation 9
volume mute 9
wireless 9
C
Cable Kit
contents 28
spare part number 26, 28, 35
cables, service considerations 40
calculator button 10
caps lock light 11
carrying case, spare part
number 30, 31
chipset, product description 1
CMOS clearing 44
components
bottom 17
buttons 9
display 8
fingerprint reader 9
front 14
keys 10
left-side 15
lights 11
pointing devices 13
rear 16
right-side 16
switches 9
top 9
computer feet
locations 45
spare part number 23, 36, 45
Computer Setup
accessing 96
Diagnostics menu 99
File menu 98
navigating and selecting 97
restoring factory settings 97
Security menu 99
System Configuration
menu 100
using 97
computer specifications 102
connectors
accessory battery 17
docking 17
service considerations 40
creating recovery points 137, 143
D
Diagnostics menu 99
Disk Sanitizer 99
diskette drive
precautions 40
product description 4
spare part number 30, 31
display assembly
removal 79
spare part numbers 19, 36, 79
display bezel
release 47
removal 81
spare part number 20, 36
Display Bracket Kit, spare part
number 20, 36
display cable, spare part
number 36
display component recycling 154
display components 8
display enclosure
spare part numbers 37
display enclosure, spare part
numbers 20, 36
display hinge
removal 83
spare part number 20, 36, 84
display inverter
removal 47
spare part number 20, 36, 47
display panel
product description 2
removal 83
display panel cable, spare part
number 20
display release latch 14
Display Rubber Kit, spare part
number 20, 36
Display Screw Kit, spare part
number 20, 36
display
specifications 103, 104, 105
docking connector 17
docking support, product
description 5
drive light 11, 14
DriveLock password 99
drives
boot order 100
preventing damage 40
DVD-ROM Drive
precautions 40
removal 60
spare part number 26, 29, 35
spare part numbers 30, 31, 60
specifications 109
DVD-RW Drive
precautions 40
removal 60
spare part
number 25, 29, 35, 60
specifications 107
DVD/CD-RW Combo Drive
precautions 40
removal 60
spare part number 25, 29, 36
spare part numbers 30, 31, 60
specifications 108
DVD±RW and CD-RW Combo
Drive
precautions 40
removal 60
spare part
numbers 25, 29, 35, 60
specifications 107
E
electrostatic discharge 41
esc key 10
Ethernet, product description 4
Execution Disable 100
external media cards, product
description 5
external monitor port
location 15
pin assignments 147
External MultiBay II power cable
and stand, spare part
number 30, 31
External MultiBay II, spare part
number 30, 31
F
fan/heat sink
spare part number 22
fan/heat sink assembly
removal 72
spare part number 37, 72
feet
locations 45
spare part number 23, 36, 45
File menu 98
fn key 10
front components 14
function keys 10
G
graphics card
removal 74
spare part
numbers 23, 35, 37, 74
graphics, product description 1
grounding equipment and
methods 43
H
hard drive
location 17
precautions 40
product description 3
removal 50
spare part
numbers 25, 29, 36, 37, 50
specifications 106
hard drive backup 136, 142
hard drive bay 17
hard drive bracket, removal 52
hard drive cover
illustrated 27
removal 51
hard drive recovery 138, 144
hard drive test 99
HDMI port
location 15
pin assignments 148
headphone jack
location 16
pin assignments 146
heat sink
removal 76
spare part numbers 22, 37, 76
hinge
removal 83
spare part number 20, 36, 84
HP Extended Life Battery, spare
part number 30, 31
HP Fingerprint Sensor 10
I
I/O address specifications 112
info button 9
interrupt specifications 111
inverter
removal 47
spare part number 47
J
jacks
audio-in 16
audio-out 16
headphone 16
microphone 16
modem 16
Index 161
network 16
RJ-11 16
RJ-45 16
K
keyboard
product description 5
removal 62
spare part
numbers 20, 21, 33, 34, 62
keypad keys 10
keys
esc 10
fn 10
function 10
keypad 10
Windows applications 10
Windows logo 10
L
Label Kit, spare part
number 30, 36
LAN Power Save 100
language, changing in Computer
Setup 100
left-side components 15
legacy support, Universal Serial
Bus (USB) 96, 100
lights
battery 11, 14
caps lock 11
drive 11, 14
num lock 11
power 11, 14
volume down 12
volume mute 12
volume up 12
wireless 11, 14
M
mass storage devices, spare part
numbers 29
Media Card Reader 14
memory check 99
memory map specifications 110
memory module
product description 2
removal 54, 65
spare part
numbers 23, 36, 38, 54, 65
162 Index
memory module/WLAN module
compartment 17
memory module/WLAN module
compartment cover
illustrated 27
removal 54
microphone 8
microphone extension cable
illustrated 28
removal 92
spare part number 36, 92
microphone jack
location 16
pin assignments 147
microphone, product
description 4
model name 1
modem jack
location 16
pin assignments 149
modem module
product description 4
removal 68
spare part number 23, 33, 68
monitor port
location 15
pin assignments 147
N
navigating in Computer Setup
network jack
location 16
pin assignments 150
num lock light 11
97
O
operating system, product
description 6
optical drive
location 16
precautions 40
product description 4
removal 60
spare part
numbers 25, 29, 35, 60
specifications 107, 108, 109
optical drive button 16
P
packing guidelines 42
parallel port mode 100
password and pointing stick
clearing 44
passwords 99
PC Card assembly
removal 94
spare part number 22, 36, 94
PC Card eject button 15
PC Card slot 15
PC Card slot bezel, illustrated 27
pin assignments
1394 port 146
audio-in jack 147
audio-out jack 146
external monitor port 147
HDMI port 148
headphone jack 146
microphone jack 147
modem jack 149
monitor port 147
network jack 150
RJ-11 149
RJ-45 jack 150
Universal Serial Bus (USB)
port 151
plastic parts 39
Plastics Kit
contents 27
spare part number 22, 27, 36
pointing device
components 13
product description 5
pointing device components
pointing stick 13
pointing stick buttons 13
TouchPad 13
TouchPad buttons 13
TouchPad scroll zone 13
pointing stick 13
pointing stick buttons 13
ports
1394 15
external monitor port 15
HDMI 15
monitor port 15
product description 5
Universal Serial Bus
(USB) 15, 16
power button 9
power button board
removal 71
spare part number 20, 35, 71
power button board cable,
illustrated 28
power connector 15
power cord
set requirements 152
spare part numbers 30, 31
power light 11, 14
power requirements, product
description 6
power-on password 99
presentation button 9
processor
product description 1
removal 77
spare part
numbers 22, 36, 37, 77
product description
audio 4
chipset 1
diskette drive 4
display panel 2
docking support 5
Ethernet 4
external media cards 5
graphics 1
hard drives 3
keyboard 5
memory module 2
microphone 4
modem module 4
operating system 6
optical drives 4
pointing devices 5
ports 5
power requirements 6
processors 1
product name 1
security 6
serviceability 7
wireless 4
product name 1
R
rear component 16
recovery discs
creating 134, 140
using 138, 144
recovery partition 139, 145
recovery points 137, 143
removal/replacement
preliminaries 39
procedures 45
restoring Computer Setup factory
settings 97
right-side components 16
RJ-11 connector cable
removal 92
RJ-11 jack
location 16
pin assignments 149
RJ-11 jack cable
illustrated 28
RJ-45 connector cable
removal 92
RJ-45 jack
location 16
pin assignments 150
RJ-45 jack cable
illustrated 28
RTC battery
removal 59
spare part number 23, 35, 59
Rubber Kit, spare part
number 23, 36
S
scheduling backups 137, 143
Screw Kit
contents 114
spare part number 31, 37
screw listing 114
security cable slot 15
Security menu 99
security, product description 6
selecting in Computer Setup 97
serial number 18, 45
service considerations 39
serviceability, product
description 7
smart card reader 15
smart card security 99
speaker assembly
removal 87
spare part number 23, 37, 87
speakers 14
specifications
computer 102
display 103, 104, 105
DVD-ROM Drive 109
DVD-RW Drive 107
DVD/CD-RW Combo
Drive 108
DVD±RW and CD-RW Combo
Drive 107
hard drive 106
I/O addresses 112
interrupts 111
memory map 110
optical drive 107, 108, 109
system DMA 110
startup check 99
static-shielding materials 43
stringent security 99
switch cover
removal 69
spare part number 20, 35, 69
system backup 136, 142
system board
removal 89
spare part numberS 89
spare part numbers 23, 35, 37
System Configuration menu 100
system DMA 110
system fan 100
system information 98
system memory map 110
system recovery points 137, 143
T
thermal material,
replacement 73, 75, 77
tools required 39
top components 9
top cover
removal 85
spare part numbers 22, 37, 85
TouchPad
removal 66
spare part numbers 22, 37, 66
TouchPad buttons 13
TouchPad cable, illustrated 28
TouchPad scroll zone 13
transporting guidelines 42
U
Universal Serial Bus (USB) legacy
support 96, 100
Index 163
Universal Serial Bus (USB) port
location 15
pin assignments 151
unknown password 44
USB/audio board
removal 93
spare part number 23, 35, 93
USB/audio board cable,
illustrated 28
V
vents 15, 16, 17
volume down light 12
volume mute button 9
volume mute light 12
volume scroll zone 10
volume up light 12
W
Windows applications key 10
Windows logo key 10
Wireless Antenna Kit, spare part
number 20, 35
wireless antennae
disconnecting 58
locations 8
wireless button 9
wireless light 11, 14
wireless, product description 4
WLAN antenna, spare part
number 20, 35
WLAN module
removal 56
spare part
numbers 23, 32, 33, 56
workstation guidelines 42
164 Index