PCA7759 User`s Manual

To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1.
2.
3.
4.
5.
6.
7.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”:
8.
9.
10.
11.
12.
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
PCA7759
MCU Signal Measurement Board for Renesas Emulator
User's Manual
Keep safety first in your circuit designs!
• Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products better and more
reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property
damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive,
auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
• These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation,
Renesas Solutions Corporation or a third party.
• Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of any third-party's rights,
originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
• All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the
time of publication of these materials, and are subject to change by Renesas Technology Corporation and Renesas Solutions Corporation without notice
due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corporation, Renesas Solutions
Corporation or an authorized Renesas Technology product distributor for the latest product information before purchasing a product listed herein. The
information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions
Corporation assume no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information
published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home page (http://
www.renesas.com).
• When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure
to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology
Corporation and Renesas Solutions Corporation assume no responsibility for any damage, liability or other loss resulting from the information contained herein.
• Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human
life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product
distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular,
medical, aerospace, nuclear, or undersea repeater use.
• The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or reproduce in whole or in part
these materials.
• If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese
government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and
regulations of Japan and/or the country of destination is prohibited.
• Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the products contained therein.
Precautions to be taken when using this product
• This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your program you have
finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing integration test, evaluation, or some
experiment else.
• In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.
• Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge. However, this does
not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any circumstances.
• This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not fall under the
application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when used in Japan.
Renesas Tools Homepage http://www.renesas.com/en/tools
CAUTION
Rev. 1.00
July 1, 2003
REJ10J0194-0100Z
If the requirements shown in the "CAUTION" sentences are ignored,
the equipment may cause personal injury or damage to the products.
1. Outline
The PCA7759 is a board for MCU signal measurement
which is connected between an emulation probe or emulator and a package converter (M3T-FLX-144NSE etc.).
2. Package Components (see Figure 1)
(1) PCA7759 measurement board
(2) PCA7759 User's Manual (This manual)
3. Specifications
Table 1 Specifications
Insertion/removal
50 times guaranteed
iterations of connector
Figure 1 Package components of the PCA7759
4. External Dimensions
External dimensions for measurement
Unit: mm
NOTE: Because GND positions are different according to MCU package, the GND holes at the four
corners of this board are not connected to the GND's of an MCU. When you make a measurement,
connect these holes to the GND's of a target board.
Figure 2 External dimensions of the PCA7759
(2/8)
5. Usage (see Figure 2)
The PCA7759 is connected between an emulation probe or emulator and package converter. According to the converter
you use, the pin numbers of an MCU allocated to CN1 and CN2. For details on pin correspondence, see 7. Correspondence
of Connectors CN1 and CN2 (pages 4 to 8).
PC4701 emulator
M3T-FLX160-PRB
CN2
CN1
CN2
CN1
Target system
PC7501 emulator
Compact emulator
Emulation probe
- M30830T-EPB
- M30700T-EPB
- M3062PT-EPB, etc.
M30800T-CPE etc.
MCU signal measurement board
PCA7759 (this product)
Package converters
- M30800T-PTC
- M3T-FLX-144NSD
- M3T-FLX-144NSE
- M3T-F160-100NSD
- M3T-F160-128NRD, etc.
NOTE: To remove the PCA7759, be sure not to use any
tools. Using a screwdriver may cause a damage of the
pattern on a board.
Figure 3 Usage of the PCA7759
6. Precautions
CAUTION
Cautions to Be Taken for This Product:
• When you remove the PCA7759, be sure to remove it carefully. Otherwise the connector may be
damaged.
• Do not use a screw driver or the like to remove the PCA7759. Otherwise the pattern on a board may be
damaged.
• We cannot accept any request for repair.
• If there is any question or doubt about this product or this instruction manual, contact the following.
Renesas Tools Homepage http://www.renesas.com/en/tools
(3/8)
7. Correspondence of Connectors CN1 and CN2
Here follows pin correspondence of each package converter.
If your package converter is not listed here, refer to the correspondence table at the end of the instruction manual of your
package converter. For the latest information including manuals, visit the Renesas Tools Homepage
http://www.renesas.com/en/tools
Table 2 Connector correspondence (Using M3T-FLX-144NSE and M3T-FLX-144NSD)
CN1 No
CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1-
1a
2a
3a
4a
5a
6a
7a
8a
9a
10a
11a
12a
13a
14a
15a
16a
17a
18a
19a
20a
21a
22a
23a
24a
25a
26a
27a
28a
29a
30a
31a
32a
33a
34a
35a
36a
37a
38a
39a
40a
IC No.
GND
17
15
13
11
9
7
5
3
1
GND
143
141
139
137
135
133
131
129
127
GND
125
123
121
119
117
115
113
111
109
GND
107
105
103
101
99
97
95
93
91
CN1 No.
CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1-
1b
2b
3b
4b
5b
6b
7b
8b
9b
10b
11b
12b
13b
14b
15b
16b
17b
18b
19b
20b
21b
22b
23b
24b
25b
26b
27b
28b
29b
30b
31b
32b
33b
34b
35b
36b
37b
38b
39b
40b
IC No.
18
16
14
12
10
8
6
4
2
GND
144
142
140
138
136
134
132
130
128
GND
126
124
122
120
118
116
114
112
110
GND
108
106
104
102
100
98
96
94
92
GND
CN2 No.
CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2-
(4/8)
1a
2a
3a
4a
5a
6a
7a
8a
9a
10a
11a
12a
13a
14a
15a
16a
17a
18a
19a
20a
21a
22a
23a
24a
25a
26a
27a
28a
29a
30a
31a
32a
33a
34a
35a
36a
37a
38a
39a
40a
IC No.
GND
20
22
24
26
28
30
32
34
36
GND
38
40
42
44
46
48
50
52
54
GND
56
58
60
62
64
66
68
70
72
GND
74
76
78
80
82
84
86
88
90
CN2 No.
CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2-
IC No.
1b
19
2b
21
3b
23
4b
25
5b
27
6b
29
7b
31
8b
33
9b
35
10b
GND
11b
37
12b
39
13b
41
14b
43
15b
45
16b
47
17b
49
18b
51
19b
53
20b
GND
21b
55
22b
57
23b
59
24b
61
25b
63
26b
65
27b
67
28b
69
29b
71
30b
GND
31b
73
32b
75
33b
77
34b
79
35b
81
36b
83
37b
85
38b
87
39b
89
40b
GND
(-: No connection)
Table 3 Connector correspondence (Using M3T-F160-128NRD)
CN1 No
CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1-
1a
2a
3a
4a
5a
6a
7a
8a
9a
10a
11a
12a
13a
14a
15a
16a
17a
18a
19a
20a
21a
22a
23a
24a
25a
26a
27a
28a
29a
30a
31a
32a
33a
34a
35a
36a
37a
38a
39a
40a
IC No.
15
13
11
10
8
6
4
2
128
126
124
122
120
119
118
116
114
112
110
108
107
105
103
101
99
97
95
93
91
89
87
85
CN1 No.
CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1-
1b
2b
3b
4b
5b
6b
7b
8b
9b
10b
11b
12b
13b
14b
15b
16b
17b
18b
19b
20b
21b
22b
23b
24b
25b
26b
27b
28b
29b
30b
31b
32b
33b
34b
35b
36b
37b
38b
39b
40b
IC No.
16
14
12
9
7
5
3
1
127
125
123
121
117
115
113
111
109
106
104
102
100
98
96
94
92
90
88
86
-
CN2 No.
CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2-
(5/8)
1a
2a
3a
4a
5a
6a
7a
8a
9a
10a
11a
12a
13a
14a
15a
16a
17a
18a
19a
20a
21a
22a
23a
24a
25a
26a
27a
28a
29a
30a
31a
32a
33a
34a
35a
36a
37a
38a
39a
40a
IC No.
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
55
56
58
60
62
64
66
68
72
74
76
78
80
82
84
CN2 No.
CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2-
IC No.
1b
17
2b
19
3b
21
4b
23
5b
25
6b
27
7b
29
8b
31
9b
33
10b
11b
35
12b
37
13b
39
14b
41
15b
43
16b
45
17b
47
18b
49
19b
51
20b
21b
53
22b
23b
24b
57
25b
59
26b
61
27b
63
28b
65
29b
67
30b
31b
69
32b
70
33b
71
34b
73
35b
75
36b
77
37b
79
38b
81
39b
83
40b
(-: No connection)
Table 4 Connector correspondence (Using M3T-FLX-120NSE)
CN1 No
CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1-
1a
2a
3a
4a
5a
6a
7a
8a
9a
10a
11a
12a
13a
14a
15a
16a
17a
18a
19a
20a
21a
22a
23a
24a
25a
26a
27a
28a
29a
30a
31a
32a
33a
34a
35a
36a
37a
38a
39a
40a
IC No.
14
12
10
9
8
7
5
3
1
120
118
116
114
112
110
108
106
104
102
100
98
96
94
92
90
88
86
84
82
80
78
76
CN1 No.
CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1-
1b
2b
3b
4b
5b
6b
7b
8b
9b
10b
11b
12b
13b
14b
15b
16b
17b
18b
19b
20b
21b
22b
23b
24b
25b
26b
27b
28b
29b
30b
31b
32b
33b
34b
35b
36b
37b
38b
39b
40b
IC No.
15
13
11
6
4
2
119
117
115
113
111
109
107
105
103
101
99
97
95
93
91
89
87
85
83
81
79
77
-
CN2 No.
CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2-
(6/8)
1a
2a
3a
4a
5a
6a
7a
8a
9a
10a
11a
12a
13a
14a
15a
16a
17a
18a
19a
20a
21a
22a
23a
24a
25a
26a
27a
28a
29a
30a
31a
32a
33a
34a
35a
36a
37a
38a
39a
40a
IC No.
17
19
21
23
25
27
29
31
33
35
37
39
42
43
45
47
49
51
53
55
57
59
61
63
65
67
69
71
73
75
CN2 No.
CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2-
IC No.
1b
16
2b
18
3b
20
4b
22
5b
24
6b
26
7b
28
8b
9b
10b
11b
30
12b
32
13b
34
14b
15b
36
16b
38
17b
40
18b
19b
41
20b
21b
22b
44
23b
46
24b
48
25b
50
26b
52
27b
54
28b
56
29b
58
30b
31b
60
32b
62
33b
64
34b
66
35b
68
36b
70
37b
72
38b
39b
74
40b
(-: No connection)
Table 5 Connector correspondence (Using M3T-F160-100NSD)
CN1 No
CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1-
1a
2a
3a
4a
5a
6a
7a
8a
9a
10a
11a
12a
13a
14a
15a
16a
17a
18a
19a
20a
21a
22a
23a
24a
25a
26a
27a
28a
29a
30a
31a
32a
33a
34a
35a
36a
37a
38a
39a
40a
IC No.
8
6
5
3
1
99
97
95
93
91
89
87
85
83
82
80
78
76
74
72
70
68
66
64
62
60
CN1 No.
CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1-
1b
2b
3b
4b
5b
6b
7b
8b
9b
10b
11b
12b
13b
14b
15b
16b
17b
18b
19b
20b
21b
22b
23b
24b
25b
26b
27b
28b
29b
30b
31b
32b
33b
34b
35b
36b
37b
38b
39b
40b
IC No.
9
7
4
2
100
98
96
94
92
90
88
60
62
86
84
81
79
77
75
73
71
69
67
65
63
61
-
CN2 No.
CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2-
(7/8)
1a
2a
3a
4a
5a
6a
7a
8a
9a
10a
11a
12a
13a
14a
15a
16a
17a
18a
19a
20a
21a
22a
23a
24a
25a
26a
27a
28a
29a
30a
31a
32a
33a
34a
35a
36a
37a
38a
39a
40a
IC No.
11
13
15
17
19
21
23
25
27
29
30
31
33
35
37
39
41
43
46
48
14
12
52
54
56
58
-
CN2 No.
CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2-
IC No.
1b
10
2b
12
3b
14
4b
16
5b
18
6b
20
7b
22
8b
24
9b
26
10b
11b
28
12b
14
13b
12
14b
32
15b
34
16b
36
17b
18b
19b
38
20b
21b
40
22b
12
23b
14
24b
25b
42
26b
44
27b
28b
45
29b
47
30b
31b
49
32b
50
33b
51
34b
53
35b
55
36b
57
37b
59
38b
39b
40b
(-: No connection)
Table 6 Connector correspondence (Using M30800T-PTC)
CN1 No
CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1-
1a
2a
3a
4a
5a
6a
7a
8a
9a
10a
11a
12a
13a
14a
15a
16a
17a
18a
19a
20a
21a
22a
23a
24a
25a
26a
27a
28a
29a
30a
31a
32a
33a
34a
35a
36a
37a
38a
39a
40a
IC No.
GND
10
8
7
5
3
1
GND
99
97
95
93
91
89
GND
87
85
84
82
80
GND
78
76
74
72
70
68
66
14, 64
62
CN1 No.
CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1CN1-
1b
2b
3b
4b
5b
6b
7b
8b
9b
10b
11b
12b
13b
14b
15b
16b
17b
18b
19b
20b
21b
22b
23b
24b
25b
26b
27b
28b
29b
30b
31b
32b
33b
34b
35b
36b
37b
38b
39b
40b
IC No.
11
9
6
4
2
GND
100
98
96
94
92
90
62
14, 64
GND
88
86
83
81
GND
79
77
75
73
71
69
67
65
63
GND
CN2 No.
CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2-
(8/8)
1a
2a
3a
4a
5a
6a
7a
8a
9a
10a
11a
12a
13a
14a
15a
16a
17a
18a
19a
20a
21a
22a
23a
24a
25a
26a
27a
28a
29a
30a
31a
32a
33a
34a
35a
36a
37a
38a
39a
40a
IC No.
GND
13
15
17
19
21
23
25
27
29
GND
31
32
33
35
37
39
41
GND
43
45
48
50
GND
16
14, 64
54
56
58
60
-
CN2 No.
CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2CN2-
IC No.
1b
12
2b
14, 64
3b
16
4b
18
5b
20
6b
22
7b
24
8b
26
9b
28
10b
GND
11b
30
12b
16
13b
14, 64
14b
34
15b
36
16b
38
17b
18b
19b
40
20b
GND
21b
42
22b
14, 64
23b
16
24b
25b
44
26b
46
27b
28b
47
29b
49
30b
GND
31b
51
32b
52
33b
53
34b
55
35b
57
36b
59
37b
61
38b
39b
40b
GND
(-: No connection)