Conexant HCF V.90 User`s guide

V.90 PCI Data/Fax
Modem
User’s Guide
OPTIONS
by IBM
Note: Before using this information and the product is supports, be sure to read the
information in “Appendix D. Product warranty and notices” on page D-1.
Second Edition (March 2001)
© Copyright International Business Machines Corporation 2001. All rights reserved.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by
GSA ADP Schedule Contract with IBM Corp.
Contents
Safety: Read first .
.
.
Modem safety information .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. v
. vii
About this book . . . . . . . . . . . . . . . . . . . . ix
Registering your option . . . . . . . . . . . . . . . . . . ix
Installation guide . . . . . . . . . . . . . . . . . . .
Product description . . . . . . . . . . . . . . . . . .
Installing the modem . . . . . . . . . . . . . . . . . .
Installing the modem in Windows 95, Windows 98 or Windows Me
Installing the modem in Windows NT 4.0 . . . . . . . . . .
Installing the modem in Windows 2000 . . . . . . . . . . .
Uninstalling the modem . . . . . . . . . . . . . . . . .
Uninstalling the modem in Windows 95, Windows 98 or Windows Me
Uninstalling the modem in Windows NT 4.0 . . . . . . . . .
Uninstalling the modem in Windows 2000 . . . . . . . . . .
. 1-1
. 1-1
. 1-2
1-2
. 1-2
. 1-3
. 1-3
1-3
. 1-4
. 1-4
Appendix A. Manual modem commands . . . . . . . . . . . A-1
Basic AT commands . . . . . . . . . . . . . . . . . . . A-1
Extended AT commands . . . . . . . . . . . . . . . . . A-3
MNP/V.42/V.42bis commands . . . . . . . . . . . . . . . A-5
Fax Class 1 commands . . . . . . . . . . . . . . . . . . A-6
Fax Class 2 commands . . . . . . . . . . . . . . . . . . A-6
Voice commands . . . . . . . . . . . . . . . . . . . . A-7
Appendix B. Technical
Data modem function
Fax function . . . .
Other function . . .
specifications . . . . . . . . . . . . B-1
. . . . . . . . . . . . . . . . . . B-1
. . . . . . . . . . . . . . . . . . B-2
. . . . . . . . . . . . . . . . . . B-2
Appendix C. Help and service information .
Warranty information on the World Wide Web
Online technical support . . . . . . .
Telephone technical support . . . . . .
. . . . . . . . . . C-1
. . . . . . . . . . C-1
. . . . . . . . . . C-1
. . . . . . . . . . C-1
Appendix D. Product warranty and notices . . .
IBM Statement of Limited Warranty . . . . . . .
Part 1 - General Terms . . . . . . . . . .
Part 2 - Country-unique Terms . . . . . . .
Trademarks . . . . . . . . . . . . . .
Federal Communications Commission (FCC) statement
© Copyright IBM Corp. 2001
. . . . . . . D-1
. . . . . . . D-1
. . . . . . . D-1
. . . . . . . D-4
. . . . . . . D-12
. . . . . . . D-13
iii
Notice to New Zealand users
General . . . . . . .
iv
.
.
.
.
V.90 PCI Data/Fax Modem: User’s Guide
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. D-16
. D-16
Safety: Read first
Before installing this product, read the Safety Information.
Antes de instalar este produto, leia as Informações de Segurança.
Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.
Læs sikkerhedsforskrifterne, før du installerer dette produkt.
Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety
Information.
Avant d’installer ce produit, lisez les consignes de sécurité.
Vor der Installation dieses Produkts die Sicherheitshinweise lesen.
Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.
Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.
Les sikkerhetsinformasjonen (Safety Information) før du installerer dette
produktet.
© Copyright IBM Corp. 2001
v
Antes de instalar este produto, leia as Informações sobre Segurança.
Pred inštaláciou tohto zariadenia si pečítaje Bezpečnostné predpisy.
Antes de instalar este producto lea la información de seguridad.
Läs säkerhetsinformationen innan du installerar den här produkten.
vi
V.90 PCI Data/Fax Modem: User’s Guide
Modem safety information
To reduce the risk of fire, electrical shock, or injury when using telephone
equipment, always follow basic safety precautions, such as:
v Never install telephone wiring during a lightning storm.
v Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
v Never touch uninsulated telephone wires or terminals unless the telephone
line has been disconnected at the network interface.
v Use caution when installing or modifying telephone lines.
v Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.
v Do not use the telephone to report a gas leak in the vicinity of the leak.
Consignes de sécurité relatives au modem
Lors de l’utilisation de votre matériel téléphonique, il est important de
respecter les consignes ci-après afin de réduire les risques d’incendie,
d’électrocution et d’autres blessures :
v N’installez jamais de cordons téléphoniques durant un orage.
v Les prises téléphoniques ne doivent pas être installées dans des endroits
humides, excepté si le modèle a été conçu à cet effet.
v Ne touchez jamais un cordon téléphonique ou un terminal non isolé avant
que la ligne ait été déconnectée du réseau téléphonique.
v Soyez toujours prudent lorsque vous procédez à l’installation ou à la
modification de lignes téléphoniques.
v Si vous devez téléphoner pendant un orage, pour éviter tout risque de choc
électrique, utilisez toujours un téléphone sans fil.
v En cas de fuite de gaz, n’utilisez jamais un téléphone situé à proximité de la
fuite.
© Copyright IBM Corp. 2001
vii
viii
V.90 PCI Data/Fax Modem: User’s Guide
About this book
®
This manual contains instructions for installing and using the IBM V.90 PCI
Data/Fax Modem. The manual is divided into two parts:
Part 1: Installation and user’s guide:
This guide contains the product description, hardware and software installation
in the following languages:
v English
v French
v Spanish
v Italian
v Brazilian Portuguese
v Traditional Chinese
v Japanese
Part 2: Appendixes
This section contains problem solving, help and service information, and
warranty and notices.
Registering your option
®
Thank you for purchasing OPTIONS by IBM . Please take a few moments to
register your product and provide us with information that will help IBM to
better serve you in the future. Your feedback is valuable to us in developing
products and services that are important to you, as well as in developing better
ways to communicate with you. Register your option on the IBM Web site at
http://www.ibm.com/pc/register
IBM will send you information and updates on your registered product unless
you indicate on the Web site questionnaire that you do not want to receive
further information.
© Copyright IBM Corp. 2001
ix
x
V.90 PCI Data/Fax Modem: User’s Guide
Installation guide
This guide contains the product description and installation instructions for the
IBM V.90 PCI Data/Fax Modem.
Product description
The IBM V.90 PCI Data/Fax Modem is an industry-standard data and fax
modem that supports both a 5-volt and a 3.3-volt power supply. The modem
®
®
®
works with Microsoft Windows 95, Windows 98, Microsoft Windows NT 4.0
Workstation, Microsoft Windows 2000 Professional, and Windows Millennium
Edition (Me).
This product has the following features:
v Support for download speeds up to 56 Kbps and uploads data at up to 33.6
Kbps
v
v
v
v
v
Note: Although this modem is capable of data download rates of up to 56
Kbps, the actual connect rate will depend upon the physical
characteristics of your telephone line.
32-bit PCI 2.2 interface
International Telecommunication Union (ITU-T) V.90 data/fax/voice
standard
Advanced Power Management
Wake on Ring through the PCI bus
Data mode features:
– 56-Kbps Internet connectivity using the ITU-T V.90 standard
– Backward-compatibility to K56Flex, V.34, and earlier standards
– Line-quality monitoring and retraining
– Auto-dialing and auto-answering
– Tone or Pulse dialing option
Note: The pulse dialing option is available only if you are using the
product in the United States or Japan.
In addition to this manual, the option package includes the following:
v IBM V.90 PCI Data/Fax Modem
v V.90 PCI Data/Fax Modem CD
v Safety manual
v Low-profile PCI bracket
v Standard telephone line
© Copyright IBM Corp. 2001
1-1
Note: You will need to replace the existing PCI bracket with this bracket if
you are installing your modem in a computer that requires a
low-profile PCI bracket.
Installing the modem
This section contains instructions for installing the modem. For information on
uninstalling the modem, go to “Uninstalling the modem” on page 1-3.
Installing the modem in Windows 95, Windows 98 or
Windows Me
To install the modem in any of these operating systems, follow these steps. The
only difference is in step 10 for Windows Me, in which you type
e:\winMe\setup.exe (where e is the letter of your CD-ROM drive).
1. Turn off the computer and all attached devices.
2. Remove the computer cover.
3. Install the modem in an available PCI slot.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Note: You might need to attach the low-profile PCI bracket that is
included with this option.
Replace the computer cover.
Turn on the computer and start Windows.
When the Add New Hardware Wizard window opens, click Cancel.
After Windows starts, click Start.
Click Run.
Insert the V.90 PCI Data/Fax Modem Device Drivers and User’s Guide CD into
the CD-ROM drive.
Type e:\win9x\setup.exe (where e is the letter of your CD-ROM drive).
Click Next.
Click Finish.
Installing the modem in Windows NT 4.0
To install the modem in Windows NT 4.0, do the following:
1. Turn off the computer and all attached devices.
2. Remove the computer cover.
3. Install the modem in an available PCI slot.
4.
5.
6.
7.
8.
1-2
Note: You might need to attach the low-profile PCI bracket that is
included with this option.
Replace the computer cover.
Turn on the computer.
After Windows NT starts, click Start.
Click Run.
Insert the V.90 PCI Data/Fax Modem Device Drivers and User’s Guide CD into
the CD-ROM drive.
V.90 PCI Data/Fax Modem: User’s Guide
9. Type e:\NT4\setup.exe (where e is the letter of the CD-ROM drive) and
press Enter.
10. Click Next.
11. Click Next.
12. Click Finish.
Installing the modem in Windows 2000
To install the modem in Windows 2000, do the following:
1. Turn off the computer and all attached devices.
2. Remove the computer cover.
3. Install the modem in an available PCI slot.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Note: You might need to attach the low-profile PCI bracket that is
included with this option.
Replace the computer cover.
Turn on the computer.
In the Found New Hardware Wizard window, click Next.
Select Search for a suitable driver, and then click Next.
Select Specify a Location.
Click Next.
Insert the V.90 PCI Data/Fax Modem Device Drivers and User’s Guide CD into
the CD-ROM drive.
Enter e:\Win2k\setup.exe (where e is the letter of the CD-ROM drive).
Click OK.
Click Next.
Click Next.
Click Finish.
Uninstalling the modem
This section contains instructions for uninstalling the modem. For information
on installing the modem, see “Installing the modem” on page 1-2.
Uninstalling the modem in Windows 95, Windows 98 or
Windows Me
To
1.
2.
3.
4.
5.
6.
7.
8.
9.
uninstall the modem in these operating systems, do the following:
Click Start, click Settings, and then click Control Panel.
Double-click Add/Remove Programs.
Select Conexant HCF V.90 56K PCI Modem.
Click Add/Remove.
In Add/Remove Program window, click OK.
Shut down the computer. Turn off the computer and all attached devices.
Remove the computer cover.
Remove the modem from the PCI slot.
Replace the computer cover.
Installation guide
1-3
Uninstalling the modem in Windows NT 4.0
To uninstall the modem in Windows NT 4.0, do the following:
1. Click Start, click Settings, and then click Control Panel.
2. Double-click Add/Remove Programs.
3. Select Conexant HCF V.90 56K PCI Modem.
4. Click Add/Remove.
5. Click Next.
6. Click Finish.
7. Click Yes.
8. Shut down the computer. Turn off the computer and all attached devices.
9. Remove the computer cover.
10. Remove the modem from the PCI slot.
11. Replace the computer cover.
Uninstalling the modem in Windows 2000
To uninstall the modem in Windows 2000, do the following:
1. Click Start, click Settings, and then click Control Panel.
2. Double-click Add/Remove Programs.
3. Select Conexant HCF V.90 56K PCI Modem.
4. Click Add/Remove.
5. Click Next.
6. Click Uninstall a device.
7. Click Next.
8. Select Conexant HCF V.90 56K PCI Modem.
9. Click Next.
10. Click Yes, I want to uninstall this device.
11. Click Next.
12. Click Finish.
13. Shut down the computer. Turn off the computer and all attached devices.
14. Remove the computer cover.
15. Remove the modem from the PCI slot.
16. Replace the computer cover.
1-4
V.90 PCI Data/Fax Modem: User’s Guide
Appendix A. Manual modem commands
The following section lists commands for manually programming your
modem.
Commands are accepted by the modem while it is in Command Mode. Your
modem is automatically in Command Mode until you dial a number and
establish a connection. Commands may be sent to your modem from a PC
running communication software or any other terminal devices.
All commands sent to the modem must begin with AT and end with ENTER.
All commands may be typed in either upper or lower case, but not mixed. To
make the command line more readable, spaces may be inserted between
commands. If you omit a parameter from a command that requires one, it is
just like specifying a parameter of 0.
Example:
ATH [ENTER]
This command causes your modem to hang up.
Basic AT commands
In the following listings, all default settings are printed in bold text.
Command
Function
A
Manually answer incoming call.
A/
Repeat last command executed. Do not precede A/ with AT or
follow with ENTER.
B_
B0
CCITT mode
B1
Bell mode
D_
0 - 9, A-D, # and *
L
last number redial
P
pulse dialing
Note: Pulse dialling is not supported for U.K., Netherlands,
Sweden, Norway, Denmark, Finland, Switzerland, Germany,
Italy, France.
T
touch-tone dialing
W
wait for second dial tone
,
pause
© Copyright IBM Corp. 2001
A-1
Command
Function
@
wait for five seconds of silence
!
flash
;
return to Command Mode after dialing
Dial one of the four telephone numbers (n=0-3) stored in the
modem non-volatile memory.
DS=n
E_
E0
Commands are not echoed
E1
Commands are echoed
+++
H_
Escape Characters - Switch from Data Mode to Command Mode
(T.I.E.S. Command)
H0
Force modem on-hook (hang up)
H1
Force modem off-hook (make busy)
Note: H1 command is not supported for Italy
I_
L_
M_
N_
O_
I0
Display product-identification code
I1
Factory ROM checksum test
I2
Internal memory test
I3
Firmware ID
I4
Reserved ID
L0
Low speaker volume
L1
Low speaker volume
L2
Medium speaker volume
L3
High speaker volume
M0
Internal speaker off
M1
Internal speaker on until carrier detected
M2
Internal speaker always on
M3
Internal speaker on until carrier detected and off while dialing
N0
Disable Autoscan mode
N1
Enable Autoscan mode
O0
Return to Data Mode
O1
P
Q_
Return to Data Mode and initiate an equalizer retrain
Set Pulse dial as default
Q0
Modem sends responses
Q1
Modem does not send responses
Sr?
Read and display value in register r.
Sr=n
Set register r to value n (n = 0-255).
T
Set Tone Dial as default
A-2
V.90 PCI Data/Fax Modem: User’s Guide
Command
V_
W_
X_
Y_
Z_
Function
V0
Numeric responses
V1
Word responses
W0
Report DTE speed only
W1
Report line speed, error correction protocol, and DTE speed.
W2
Report DCE speed only
X0
Hayes Smartmodem 300 compatible responses/blind dialing.
X1
Same as X0 plus all CONNECT responses/blind dialing
X2
Same as X1 plus dial tone detection
X3
Same as X1 plus busy detection/blind dialing
X4
All responses and dial tone and busy signal detection
Y0
Modem does not send or respond to break signals
Y1
Modem sends break signal for four seconds before disconnecting
Z0
Reset and retrieve active profile 0
Z1
Reset and retrieve active profile 1
Extended AT commands
Command
&C_
&D_
Function
&C0
Force Carrier Detect Signal High (ON)
&C1
Turn on CD when remote carrier is present
&D0
Modem ignores the DTR signal
&D1
Modem returns to Command Mode after DTR toggle
&D2
Modem hangs up, returns to the Command Mode after
DTR toggle
&D3
Resets modem after DTR toggle
&F_
&F
Recall factory default configuration
&G_
&G0
Guard tone disabled
&G1
Guard tone disabled
&G2
1800 Hz guard tone
&K0
Disable flow control
&K3
Enable RTS/CTS hardware flow control
&K4
Enable XON/XOFF software flow control
&K5
Enable transparent XON/XOFF flow control
&K_
&L_
&K6
Enable both RTS/CTS and XON/XOFF flow control
&L0
Modem is set up for dial-up operation
Appendix A. Manual modem commands
A-3
Command
Function
&M_
&M0
Asynchronous operation
&P_
&P0
US setting for off-hook-to-on-hook ratio
&P1
UK and Hong Kong off-hook-to-on-hook ratio
&P2
Same as &P0 setting but at 20 pulses per minute
&P3
Same as &P1 setting but at 20 pulses per minute
&R_
&R0
Reserved
&R1
CTS operates per flow control requirements
&S_
&S0
Force DSR Signal High (ON)
&S1
DSR off in command mode, on in on-line mode
&T0
Ends test in progress
&T1
Perform Local Analog Loopback Test
&T3
Perform Local Digital Loopback Test
&T4
Grant Remote Digital Loopback Test request by remote
modem
&T5
Deny Remote Digital Loopback Test request
&T6
Perform a Remote Digital Loopback Test
&T7
Perform a Remote Digital Loopback Test and Self-Test
&T8
Perform Local Analog Loopback Test and Self-Test
&V0
Displays Active and Stored Profiles
&V1
Display Last Connection Statistics
&W0
Stores the active profile as Profile 0
&W1
Stores the active profile as Profile 1
&Y0
Configuration Profile 0 active upon Power on or reset
&T_
&V
&W_
&Y_
&Y1
Configuration Profile 1 active upon Power on or reset
&Zn=x
n=0-3
Store phone number x into non-volatile RAM
%E_
%E0
Disable auto-retrain
%E1
Enable auto-retrain
+MS?
Displays the current Select Modulation settings
+MS=?
Displays a list of supported Select Modulation options
A-4
V.90 PCI Data/Fax Modem: User’s Guide
Command
Function
+MS=a,b,c,d,e,f
Select modulation where: a=0, 1, 2, 3, 9, 10, 11, 12, 56, 64, 69;
b=0-1; c=300-56000; d=300- 56000; e=0-1; and f=0-1. A, b, c,
d, e, f default=12, 1, 300, 56000, 0, 0. Parameter ″a″ specifies
the modulation protocol desired where: 0=V.21, 1=V.22,
2=V.22bis, 3=V.23, 9=V.32, 10=V.32bis, 11=V.34,
12=V.90,K56Flex,V.34......,56=K 56Flex, V.90,V.34......, 64=Bell
103, and 69=Bell 212. Parameter ″b″ specifies automode
operations where: 0=automode disabled, 1= automode
enabled with V.8/V.32 Annex A. Parameter ″c″ specifies the
minimum connection data rate (300- 56000). Parameter ″d″
specifies the maximum connection rate (300-56000);
Parameter ″e″ specifies the codec type (0= Law, and
1=A-Law). Parameter ″f″ specifies ″robbed bit″ signaling
detection (0=detection disabled 1=detection enabled)
MNP/V.42/V.42bis commands
Command
%C_
&Q_
\A_
Function
%C0
Disable MNP Class 5 and V.42bis data compression
%C1
Enable MNP Class 5 data compression only
%C2
Enable V.42bis data compression only
%C3
Enable MNP Class 5 and V.42bis data compression
&Q0
Direct data link only (same as \N1)
&Q5
V.42 data link with fallback options
&Q6
Normal data link only (same as \N0)
\A0
64-character maximum MNP block size
\A1
128-character maximum MNP block size
\A2
192-character maximum MNP block size
\A3
256-character maximum MNP block size
\Bn
Send a 1/10 second line break to the modem, where n = 1 to 9.
At normal connect, the default is 3
\Kn
Set break control, where n= 0 to 2. The effect of this command
depends on the modem operating condition. Default is 1.
\N_
\N0
Normal data-link only
\N1
Direct data-link only
\N2
V.42 or MNP data link only
\N3
V.42/MNP/Normal data link
\N4
V.42 data link only
\N5
MNP data link only
Appendix A. Manual modem commands
A-5
Fax Class 1 commands
+FAE=n
Data/Fax Auto Answer
+FCLASS=n
Service Class
+FRH=n
Receive data with HDLC framing
+FRM=n
Receive data
+FRS=n
Receive silence
+FTH=n
Transmit data with HDLC framing
+FTM=n
Transmit data
+FTS=n
Stop transmission and wait
Fax Class 2 commands
+FCLASS=n
Services class.
+FAA=n
Adaptive answer.
+FAXERR
Fax error value.
+FBOR
Phase C data bit order.
+FBUF?
Buffer size (read only).
+FCFR
Indicate confirmation to receive.
+FCLASS=
Service class.
+FCON
Facsimile connection response.
+FCIG
Set the polled station identification.
+FCIG:
Report the polled station identification.
+FCR
Capability to receive.
+FCR=
Capability to receive.
+FCSI:
Report the called station ID.
+FDCC=
DCE capabilities parameters.
+FDCS:
Report current session.
+FDCS=
Current session results.
+FDIS:
Report remote capabilities.
+FDIS=
Current sessions parameters.
+FDR
Begin or continue phase C receive data.
+FDT=
Data transmission.
+FDTC:
Report the polled station capabilities.
+FET:
Post page message response.
+FET=N
Transmit page punctuation.
A-6
V.90 PCI Data/Fax Modem: User’s Guide
+FHNG
Call termination with status.
+FK
Session termination.
+FLID=
Local ID string.
+FLPL
Document for polling.
+FMDL?
Identify model.
+FMFR?
Identify manufacturer.
+FPHCTO
Phase C time out.
+FPOLL
Indicates polling request.
+FPTS:
Page transfer status.
+FPTS=
Page transfer status.
+FREV?
Identify revision.
+FSPT
Enable polling.
+FTSI:
Report the transmit station ID.
Voice commands
#BDR
Select Baud Rate
#CID
Enable Caller ID detection and reporting format
#CLS
Select Data, Fax or Voice/Audio
#MDL?
Identify Model
#MFR?
Identify Manufacturer
#REV?
Identify Revision Level
#TL
Audio output transmit level
#VBQ?
Query Buffer Size
#VBS
Bits per sample (ADPCM or PCM)
#VBT
Beep Tone Timer
#VCI?
Identify Compression Method
#VLS
Voice line select
#VRA
Ringback goes away timer
#VRN
Ringback never came timer
#VRX
Voice Receive Mode
#VSDB
Silence deletion tuner
#VSK
Buffer skid setting
#VSP
Silence detection period
#VSR
Sampling rate selection
#VSS
Silence deletion tuner
Appendix A. Manual modem commands
A-7
#VTD
DTMF tone reporting capability
#VTM
Enable timing mark placement
#VTS
Generate tone signals
#VTX
Voice transmit mode
A-8
V.90 PCI Data/Fax Modem: User’s Guide
Appendix B. Technical specifications
This section contains the technical specifications for the IBM V.90 Data/Fax
Modem.
Data modem function
v Full duplex transmission
v Asynchronous communication data mode
v ITU-T V.90, K56flex, V.34(33.6 Kbps), V.32bis, V.32, V.22 bis, V.22 V.23 and
V.21; Bell 212A and 103
v V.42 LAPM and MNP 2-4 error correction
v V.42 bis and MNP 5 data compression
v V.25 ter (Annex A) and EIA/TIA 602 command set
v Data Length: 10 bits, including start, stop, parity
v Modulation Format
– V.34 TCM at 2400/2800/3000/3429 baud
– V.32bis, 128 points TCM at 2400 baud
– V.22bis, 16 points QAM at 600 baud
– V.22 and 212A, 4 points PSK at 600 baud
– V.23, V.21 and 103, binary phase coherent FSK
v Transmit Level less than -11 dBm
v Guard Tone: 550 20 Hz Or 1800 20 Hz
v Answer Tone: CCITT (2100 Hz 15 Hz) or BELL (2225 Hz 10 Hz)
v Receive Sensitivity: (V.34) -34dBm
v Carrier Response Level: -42 dBm
v Data Format
– 1 Start bit, 7 data bit, even or odd parity, 1 stop bit.
– 1 Start bit, 7 data bit, no parity, 2 stop bit.
– 1 Start bit, 7 data bit, mark or space parity, 1 stop bit.
– 1 Start bit, 8 data bit, none parity, 1 stop bit.
v DTE to Modem Data Rate: Up to 300, 1200, 2400, 4800, 9600, 14400, 19200,
28800, 38400, 57600, 115200 bps.
v Normal Mode Line Data Rate: 300, 1200, 2400, 4800, 9600, 14400, 16800,
19200, 21600, 24000, 26400, 28800, 33600 ... 56000 and 1200/75 bps.
© Copyright IBM Corp. 2001
B-1
Fax function
v Half duplex transmission
v G3 Fax modes
– V.17 (14400bps) send / receive
– V.29 (9600 / 7200bps) send / receive
– V.27 ter (4800 / 2400bps) send / receive
– V.21 channel 2 (300bps) only for signaling
v Modulation format
– V.17 TCM at 2400 baud
– V.29 QAM at 2400 baud
– V.27 ter DPSK at 1600/1200 baud
v Carrier frequencies
– V.17 transmit carrier 1700 or 1800 Hz
– V.29 transmit carrier 1700 Hz
– V.27 ter transmit carrier 1800 Hz
v EIA / TIA 578 Class 1 and T.31 Class 1.0 commands
Other function
v Multiple country support
v Call progress, Blacklisting options
v Single profile stored in host
v Wake up on ring capable using either ACPI PME# signal or two-pin
connector
v 32-bit PCI Local Bus interface
v Windows 95, Windows 95 OSR2, Windows 98, Windows Me, Windows NT
4.0, Windows 2000 operating systems
v Microsoft’s PC99 design initiative compliant
v Conforms to the PCI Local Bus Specification, Revision 2.2
v Supports PCI Bus Power Management
– Vaux auto detection
– ACPI Power Management Registers
– PME# and APM support
v One RJ11 phone jacks for line
B-2
V.90 PCI Data/Fax Modem: User’s Guide
Appendix C. Help and service information
This section contains information on how to obtain warranty information on
the World Wide Web and online and telephone technical support.
Warranty information on the World Wide Web
The IBM Machine Warranties Web site at
http://www.ibm.com/servers/support/machine_warranties/ contains a
worldwide overview of the IBM Limited Warranty for IBM Machines, a
glossary of terms used in the Statement of Limited Warranty, Frequently Asked
Questions (FAQ), and links to Product Support Web pages. The IBM Statement
of Limited Warranty is available from this Web site in 29 languages in Portable
Document Format (PDF).
Online technical support
Online technical support is available during the life of your product. Online
assistance can be obtained through the Personal Computing Support Web site
and the IBM Automated Fax System.
Online technical support
IBM Personal Computing Support Web site
http://www.ibm.com/pc/support
IBM Automated Fax System
1-800-426-3395 (U.S. and Canada)
During the warranty period, assistance for replacement or exchange of
defective components is available. In addition, if your IBM option is installed
in an IBM computer, you might be entitled to service at your location. Your
technical support representative can help you determine the best alternative.
Telephone technical support
Installation and configuration support through the HelpCenter will be
withdrawn or made available for a fee, at IBM’s discretion, 90 days after the
option has been withdrawn from marketing. Additional support offerings,
including step-by-step installation assistance, are available for a nominal fee.
To assist the technical support representative, have available as much of the
following information as possible:
v Option name
v Option number
v Proof of purchase
© Copyright IBM Corp. 2001
C-1
v Computer manufacturer, model, serial number (if IBM), and manual
v Exact wording of the error message (if any)
v Description of the problem
v Hardware and software configuration information for your system
If possible, be at your computer. Your technical support representative might
want to walk you through the problem during the call.
For the support telephone number and support hours by country, refer to the
following table or to the enclosed technical support insert. If the number is not
provided, contact your IBM reseller or IBM marketing representative. Response
time may vary depending on the number and nature of the calls received.
Support 24 hours a day, 7 days a week
Canada (Toronto only)
416-383-3344
Canada (all other)
1-800-565-3344
U.S.A. and Puerto Rico
1-800-772-2227
All other countries
Go to http://www.ibm.com/pc/support/,
and click HelpCenter Phone List.
C-2
V.90 PCI Data/Fax Modem: User’s Guide
Appendix D. Product warranty and notices
This section contains the warranty period for your product and the IBM
Statement of Limited Warranty.
Machine - V.90 PCI Data/Fax Modem Warranty period* - One Year
* Contact your place of purchase for warranty service information. Some IBM Machines are
eligible for on-site warranty service depending on the country where service is performed.
IBM Statement of Limited Warranty
Part 1 - General Terms
This Statement of Limited Warranty includes Part 1 - General Terms and Part 2
- Country-unique Terms. The terms of Part 2 replace or modify those of Part 1.
The warranties provided by IBM in this Statement of Limited Warranty apply
only to Machines you purchase for your use, and not for resale, from IBM or
your reseller. The term “Machine” means an IBM machine, its features,
conversions, upgrades, elements, or accessories, or any combination of them.
The term “Machine” does not include any software programs, whether
pre-loaded with the Machine, installed subsequently or otherwise. Unless IBM
specifies otherwise, the following warranties apply only in the country where
you acquire the Machine. Nothing in this Statement of Limited Warranty
affects any statutory rights of consumers that cannot be waived or limited by
contract. If you have any questions, contact IBM or your reseller.
The IBM Warranty for Machines
IBM warrants that each Machine 1) is free from defects in materials and
workmanship and 2) conforms to IBM’s Official Published Specifications
(“Specifications”). The warranty period for a Machine is a specified, fixed
period commencing on its Date of Installation. The date on your sales receipt is
the Date of Installation unless IBM or your reseller informs you otherwise.
If a Machine does not function as warranted during the warranty period, and
IBM or your reseller are unable to either 1) make it do so or 2) replace it with
one that is at least functionally equivalent, you may return it to your place of
purchase and your money will be refunded.
Extent of Warranty
The warranty does not cover the repair or exchange of a Machine resulting
from misuse, accident, modification, unsuitable physical or operating
© Copyright IBM Corp. 2001
D-1
environment, improper maintenance by you, or failure caused by a product for
which IBM is not responsible. The warranty is voided by removal or alteration
of Machine or parts identification labels.
THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND
REPLACE ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. THESE WARRANTIES GIVE YOU
SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS
WHICH VARY FROM JURISDICTION TO JURISDICTION. SOME
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF EXPRESS OR IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION
OR LIMITATION MAY NOT APPLY TO YOU. IN THAT EVENT, SUCH
WARRANTIES ARE LIMITED IN DURATION TO THE WARRANTY
PERIOD. NO WARRANTIES APPLY AFTER THAT PERIOD.
Items Not Covered by Warranty
IBM does not warrant uninterrupted or error-free operation of a Machine.
Any technical or other support provided for a Machine under warranty, such
as assistance via telephone with “how-to” questions and those regarding
Machine set-up and installation, will be provided WITHOUT WARRANTIES
OF ANY KIND.
Warranty Service
To obtain warranty service for a Machine, contact IBM or your reseller. If you
do not register your Machine with IBM, you may be required to present proof
of purchase.
During the warranty period, IBM or your reseller, if approved by IBM to
provide warranty service, provides without charge certain types of repair and
exchange service to keep Machines in, or restore them to, conformance with
their Specifications. IBM or your reseller will inform you of the available types
of service for a Machine based on its country of installation. At its discretion,
IBM or your reseller will 1) either repair or exchange the failing Machine and
2) provide the service either at your location or a service center. IBM or your
reseller will also manage and install selected engineering changes that apply to
the Machine.
Some parts of IBM Machines are designated as Customer Replaceable Units
(called “CRUs”), e.g., keyboards, memory, or hard disk drives. IBM ships CRUs
to you for replacement by you. You must return all defective CRUs to IBM
within 30 days of your receipt of the replacement CRU. You are responsible for
D-2
V.90 PCI Data/Fax Modem: User’s Guide
downloading designated Machine Code and Licensed Internal Code updates
from an IBM Internet Web site or from other electronic media, and following
the instructions that IBM provides.
When warranty service involves the exchange of a Machine or part, the item
IBM or your reseller replaces becomes its property and the replacement
becomes yours. You represent that all removed items are genuine and
unaltered. The replacement may not be new, but will be in good working order
and at least functionally equivalent to the item replaced. The replacement
assumes the warranty service status of the replaced item. Many features,
conversions, or upgrades involve the removal of parts and their return to IBM.
A part that replaces a removed part will assume the warranty service status of
the removed part.
Before IBM or your reseller exchanges a Machine or part, you agree to remove
all features, parts, options, alterations, and attachments not under warranty
service.
You also agree to
1. ensure that the Machine is free of any legal obligations or restrictions that
prevent its exchange;
2. obtain authorization from the owner to have IBM or your reseller service a
Machine that you do not own; and
3. where applicable, before service is provided:
a. follow the problem determination, problem analysis, and service request
procedures that IBM or your reseller provides;
b. secure all programs, data, and funds contained in a Machine;
c. provide IBM or your reseller with sufficient, free, and safe access to
your facilities to permit them to fulfill their obligations; and
d. inform IBM or your reseller of changes in a Machine’s location.
IBM is responsible for loss of, or damage to, your Machine while it is 1) in
IBM’s possession or 2) in transit in those cases where IBM is responsible for
the transportation charges.
Neither IBM nor your reseller is responsible for any of your confidential,
proprietary or personal information contained in a Machine which you return
to IBM or your reseller for any reason. You should remove all such information
from the Machine prior to its return.
Limitation of Liability
Circumstances may arise where, because of a default on IBM’s part or other
liability, you are entitled to recover damages from IBM. In each such instance,
regardless of the basis on which you are entitled to claim damages from IBM
(including fundamental breach, negligence, misrepresentation, or other contract
Appendix D. Product warranty and notices
D-3
or tort claim), except for any liability that cannot be waived or limited by
applicable laws, IBM is liable for no more than
1. damages for bodily injury (including death) and damage to real property
and tangible personal property; and
2. the amount of any other actual direct damages, up to the charges (if
recurring, 12 months’ charges apply) for the Machine that is subject of the
claim. For purposes of this item, the term “Machine” includes Machine
Code and Licensed Internal Code.
This limit also applies to IBM’s suppliers and your reseller. It is the
maximum for which IBM, its suppliers, and your reseller are collectively
responsible.
UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF THE
FOLLOWING: 1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES
(OTHER THAN THOSE UNDER THE FIRST ITEM LISTED ABOVE); 2)
LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR 3) SPECIAL,
INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC
CONSEQUENTIAL DAMAGES, LOST PROFITS OR LOST SAVINGS,
EVEN IF IBM, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF
THEIR POSSIBILITY. SOME JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU.
Governing Law
Both you and IBM consent to the application of the laws of the country in
which you acquired the Machine to govern, interpret, and enforce all of your
and IBM’s rights, duties, and obligations arising from, or relating in any
manner to, the subject matter of this Agreement, without regard to conflict of
law principles.
Part 2 - Country-unique Terms
AMERICAS
BRAZIL
Governing Law: The following is added after the first sentence:Any litigation
arising from this Agreement will be settled exclusively by the court of Rio de
Janeiro.
NORTH AMERICA
D-4
V.90 PCI Data/Fax Modem: User’s Guide
Warranty Service: The following is added to this Section: To obtain warranty
service from IBM in Canada or the United States, call 1-800-IBM-SERV
(426-7378).
CANADA
Governing Law: The following replaces “laws of the country in which you acquired
the Machine” in the first sentence: laws in the Province of Ontario.
UNITED STATES
Governing Law: The following replaces “laws of the country in which you acquired
the Machine” in the first sentence: laws of the State of New York.
ASIA PACIFIC
AUSTRALIA
The IBM Warranty for Machines: The following paragraph is added to this Section:
The warranties specified in this Section are in addition to any rights you may
have under the Trade Practices Act 1974 or other similar legislation and are
only limited to the extent permitted by the applicable legislation.
Limitation of Liability: The following is added to this Section: Where IBM is in
breach of a condition or warranty implied by the Trade Practices Act 1974 or
other similar legislation, IBM’s liability is limited to the repair or replacement
of the goods or the supply of equivalent goods. Where that condition or
warranty relates to right to sell, quiet possession or clear title, or the goods are
of a kind ordinarily acquired for personal, domestic or household use or
consumption, then none of the limitations in this paragraph apply.
Governing Law: The following replaces “laws of the country in which you acquired
the Machine” in the first sentence: laws of the State or Territory.
CAMBODIA, LAOS, AND VIETNAM
Governing Law: The following replaces “laws of the country in which you acquired
the Machine” in the first sentence:laws of the State of New York.
The following is added to this Section: Disputes and differences arising out of or
in connection with this Agreement shall be finally settled by arbitration which
shall be held in Singapore in accordance with the rules of the International
Chamber of Commerce (ICC). The arbitrator or arbitrators designated in
conformity with those rules shall have the power to rule on their own
competence and on the validity of the Agreement to submit to arbitration. The
Appendix D. Product warranty and notices
D-5
arbitration award shall be final and binding for the parties without appeal and
the arbitral award shall be in writing and set forth the findings of fact and the
conclusions of law.
All proceedings shall be conducted, including all documents presented in such
proceedings, in the English language. The number of arbitrators shall be three,
with each side to the dispute being entitled to appoint one arbitrator.
The two arbitrators appointed by the parties shall appoint a third arbitrator
before proceeding upon the reference. The third arbitrator shall act as chairman
of the proceedings. Vacancies in the post of chairman shall be filled by the
president of the ICC. Other vacancies shall be filled by the respective
nominating party. Proceedings shall continue from the stage they were at when
the vacancy occurred.
If one of the parties refuses or otherwise fails to appoint an arbitrator within 30
days of the date the other party appoints its, the first appointed arbitrator shall
be the sole arbitrator, provided that the arbitrator was validly and properly
appointed.
The English language version of this Agreement prevails over any other
language version.
HONG KONG AND MACAU
Governing Law: The following replaces “laws of the country in which you acquired
the Machine” in the first sentence: laws of Hong Kong Special Administrative
Region.
INDIA
Limitation of Liability: The following replaces items 1 and 2 of this Section:
1. liability for bodily injury (including death) or damage to real property and
tangible personal property will be limited to that caused by IBM’s
negligence;
2. as to any other actual damage arising in any situation involving
nonperformance by IBM pursuant to, or in any way related to the subject
of this Statement of Limited Warranty, IBM’s liability will be limited to the
charge paid by you for the individual Machine that is the subject of the
claim.
JAPAN
Governing Law: The following sentence is added to this Section:Any doubts
concerning this Agreement will be initially resolved between us in good faith
and in accordance with the principle of mutual trust.
D-6
V.90 PCI Data/Fax Modem: User’s Guide
NEW ZEALAND
The IBM Warranty for Machines: The following paragraph is added to this Section:
The warranties specified in this Section are in addition to any rights you may
have under the Consumer Guarantees Act 1993 or other legislation which
cannot be excluded or limited. The Consumer Guarantees Act 1993 will not
apply in respect of any goods which IBM provides, if you require the goods
for the purposes of a business as defined in that Act.
Limitation of Liability: The following is added to this Section: Where Machines
are not acquired for the purposes of a business as defined in the Consumer
Guarantees Act 1993, the limitations in this Section are subject to the
limitations in that Act.
TAIWAN
Governing Law: The following replaces this Section: Both you and IBM consent to
the application of the laws of the State of New York (except when local law
requires otherwise) to govern, interpret, and enforce all your and IBM’s rights,
duties, and obligations arising from, or relating in any manner to, the subject
matter of this Agreement, without regard to conflict of law principles.
Any disputes arising from or in connection with this Agreement will first be
resolved by friendly negotiations, failing which either of us has the right to
submit the dispute to the China International Economic and Trade Arbitration
Commission in Beijing, the PRC, for arbitration in accordance with its
arbitration rules in force at the time. The arbitration tribunal will consist of
three arbitrators. The language to be used therein will be English and Chinese.
An arbitral award will be final and binding on all the parties, and will be
enforceable under the Convention on the Recognition and Enforcement of
Foreign Arbitral Awards (1958).
The arbitration fee will be borne by the losing party unless otherwise
determined by the arbitral award.
During the course of arbitration, this Agreement will continue to be performed
except for the part which the parties are disputing and which is undergoing
arbitration.
EUROPE, MIDDLE EAST, AFRICA (EMEA)
THE FOLLOWING TERMS APPLY TO ALL EMEA COUNTRIES: The terms of
this Statement of Limited Warranty apply to Machines purchased from IBM or
an IBM reseller.
Warranty Service:
Appendix D. Product warranty and notices
D-7
If you purchase an IBM Machine in Austria, Belgium, Denmark, Estonia,
Finland, France, Germany, Greece, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland or
United Kingdom, you may obtain warranty service for that Machine in any of
those countries from either (1) an IBM reseller approved to perform warranty
service or (2) from IBM. If you purchase an IBM Personal Computer Machine
in Albania, Armenia, Belarus, Bosnia and Herzegovina, Bulgaria, Croatia,
Czech Republic, Georgia, Hungary, Kazakhstan, Kirghizia, Federal Republic of
Yugoslavia, Former Yugoslav Republic of Macedonia (FYROM), Moldova,
Poland, Romania, Russia, Slovak Republic, Slovenia, or Ukraine, you may
obtain warranty service for that Machine in any of those countries from either
(1) an IBM reseller approved to perform warranty service or (2) from IBM.
If you purchase an IBM Machine in a Middle Eastern or African country, you
may obtain warranty service for that Machine from the IBM entity within the
country of purchase, if that IBM entity provides warranty service in that
country, or from an IBM reseller, approved by IBM to perform warranty service
on that Machine in that country. Warranty service in Africa is available within
50 kilometers of an IBM authorized service provider. You are responsible for
transportation costs for Machines located outside 50 kilometers of an IBM
authorized service provider.
Governing Law:
The applicable laws that govern, interpret and enforce rights, duties, and
obligations of each of us arising from, or relating in any manner to, the subject
matter of this Statement, without regard to conflict of laws principles, as well
as Country-unique terms and competent court for this Statement are those of
the country in which the warranty service is being provided, except that in 1)
Albania, Bosnia-Herzegovina, Bulgaria, Croatia, Hungary, Former Yugoslav
Republic of Macedonia, Romania, Slovakia, Slovenia, Armenia, Azerbaijan,
Belarus, Georgia, Kazakhstan, Kyrgyzstan, Moldova, Russia, Tajikistan,
Turkmenistan, Ukraine, and Uzbekistan, the laws of Austria apply; 2) Estonia,
Latvia, and Lithuania, the laws of Finland apply; 3) Algeria, Benin, Burkina
Faso, Cameroon, Cape Verde, Central African Republic, Chad, Congo, Djibouti,
Democratic Republic of Congo, Equatorial Guinea, France, Gabon, Gambia,
Guinea, Guinea-Bissau, Ivory Coast, Lebanon, Mali, Mauritania, Morocco,
Niger, Senegal, Togo, and Tunisia, this Agreement will be construed and the
legal relations between the parties will be determined in accordance with the
French laws and all disputes arising out of this Agreement or related to its
violation or execution, including summary proceedings, will be settled
exclusively by the Commercial Court of Paris; 4) Angola, Bahrain, Botswana,
Burundi, Egypt, Eritrea, Ethiopia, Ghana, Jordan, Kenya, Kuwait, Liberia,
Malawi, Malta, Mozambique, Nigeria, Oman, Pakistan, Qatar, Rwanda, Sao
Tome, Saudi Arabia, Sierra Leone, Somalia, Tanzania, Uganda, United Arab
Emirates, United Kingdom, West Bank/Gaza, Yemen, Zambia, and Zimbabwe,
this Agreement will be governed by English Law and disputes relating to it
D-8
V.90 PCI Data/Fax Modem: User’s Guide
will be submitted to the exclusive jurisdiction of the English courts; and 5) in
Greece, Israel, Italy, Portugal, and Spain any legal claim arising out of this
Statement will be brought before, and finally settled by, the competent court of
Athens, Tel Aviv, Milan, Lisbon, and Madrid, respectively.
THE FOLLOWING TERMS APPLY TO THE COUNTRY SPECIFIED:
AUSTRIA AND GERMANY
The IBM Warranty for Machines: The following replaces the first sentence of the
first paragraph of this Section: The warranty for an IBM Machine covers the
functionality of the Machine for its normal use and the Machine’s conformity
to its Specifications.
The following paragraphs are added to this Section:
The minimum warranty period for Machines is six months. In case IBM or
your reseller is unable to repair an IBM Machine, you can alternatively ask for
a partial refund as far as justified by the reduced value of the unrepaired
Machine or ask for a cancellation of the respective agreement for such Machine
and get your money refunded.
Extent of Warranty: The second paragraph does not apply.
Warranty Service: The following is added to this Section: During the warranty
period, transportation for delivery of the failing Machine to IBM will be at
IBM’s expense.
Limitation of Liability: The following paragraph is added to this Section: The
limitations and exclusions specified in the Statement of Limited Warranty will
not apply to damages caused by IBM with fraud or gross negligence and for
express warranty.
The following sentence is added to the end of item 2: IBM’s liability under this item
is limited to the violation of essential contractual terms in cases of ordinary
negligence.
EGYPT
Limitation of Liability: The following replaces item 2 in this Section: as to any
other actual direct damages, IBM’s liability will be limited to the total amount
you paid for the Machine that is the subject of the claim. For purposes of this
item, the term “Machine” includes Machine Code and Licensed Internal Code.
Applicability of suppliers and resellers (unchanged).
Appendix D. Product warranty and notices
D-9
FRANCE
Limitation of Liability: The following replaces the second sentence of the first
paragraph of this Section:In such instances, regardless of the basis on which you
are entitled to claim damages from IBM, IBM is liable for no more than: (items
1 and 2 unchanged).
IRELAND
Extent of Warranty: The following is added to this Section: Except as expressly
provided in these terms and conditions, all statutory conditions, including all
warranties implied, but without prejudice to the generality of the foregoing all
warranties implied by the Sale of Goods Act 1893 or the Sale of Goods and
Supply of Services Act 1980 are hereby excluded.
Limitation of Liability: The following replaces items one and two of the first
paragraph of this Section:1. death or personal injury or physical damage to your
real property solely caused by IBM’s negligence; and 2. the amount of any
other actual direct damages, up to 125 percent of the charges (if recurring, the
12 months’ charges apply) for the Machine that is the subject of the claim or
which otherwise gives rise to the claim.
Applicability of suppliers and resellers (unchanged).
The following paragraph is added at the end of this Section: IBM’s entire liability
and your sole remedy, whether in contract or in tort, in respect of any default
shall be limited to damages.
ITALY
Limitation of Liability: The following replaces the second sentence in the first
paragraph:In each such instance unless otherwise provided by mandatory law,
IBM is liable for no more than: 1. (unchanged) 2. as to any other actual damage
arising in all situations involving nonperformance by IBM pursuant to, or in
any way related to the subject matter of this Statement of Warranty, IBM’s
liability, will be limited to the total amount you paid for the Machine that is
the subject of the claim. Applicability of suppliers and resellers (unchanged).
The following replaces the third paragraph of this Section: Unless otherwise
provided by mandatory law, IBM and your reseller are not liable for any of the
following: (items 1 and 2 unchanged) 3) indirect damages, even if IBM or your
reseller is informed of their possibility.
SOUTH AFRICA, NAMIBIA, BOTSWANA, LESOTHO AND SWAZILAND
D-10
V.90 PCI Data/Fax Modem: User’s Guide
Limitation of Liability: The following is added to this Section: IBM’s entire
liability to you for actual damages arising in all situations involving
nonperformance by IBM in respect of the subject matter of this Statement of
Warranty will be limited to the charge paid by you for the individual Machine
that is the subject of your claim from IBM.
UNITED KINGDOM
Limitation of Liability: The following replaces items 1 and 2 of the first paragraph
of this Section:
1. death or personal injury or physical damage to your real property solely
caused by IBM’s negligence;
2. the amount of any other actual direct damages or loss, up to 125 percent of
the charges (if recurring, the 12 months’ charges apply) for the Machine
that is the subject of the claim or which otherwise gives rise to the claim;
The following item is added to this paragraph: 3. breach of IBM’s obligations
implied by Section 12 of the Sale of Goods Act 1979 or Section 2 of the Supply
of Goods and Services Act 1982.
Applicability of suppliers and resellers (unchanged).
The following is added to the end of this Section: IBM’s entire liability and your
sole remedy, whether in contract or in tort, in respect of any default shall be
limited to damages. This publication was developed for products and services
offered in the U.S.A.
IBM may not offer the products, services, or features discussed in this
document in other countries. Consult your local IBM representative for
information on the products and services currently available in your area. Any
reference to an IBM product, program, or service is not intended to state or
imply that only that IBM product, program, or service may be used. Any
functionally equivalent product, program, or service that does not infringe any
IBM intellectual property right may be used instead. However, it is the user’s
responsibility to evaluate and verify the operation of any non-IBM product,
program, or service.
IBM may have patents or pending patent applications covering subject matter
described in this document. The furnishing of this document does not give you
any license to these patents. You can send license inquiries, in writing, to:
IBM Director of Licensing
IBM Corporation
North Castle Drive
Armonk, NY 10504-1785
U.S.A.
Appendix D. Product warranty and notices
D-11
The following paragraph does not apply to the United Kingdom or any
country where such provisions are inconsistent with local law:
INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS
PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of
express or implied warranties in certain transactions, therefore, this statement
may not apply to you.
This information could include technical inaccuracies or typographical errors.
Changes are periodically made to the information herein; these changes will be
incorporated in new editions of the publication. IBM may make improvements
and/or changes in the product(s) and/or the program(s) described in this
publication at any time without notice.
IBM may use or distribute any of the information you supply in any way it
believes appropriate without incurring any obligation to you. Any references in
this publication to non-IBM Web sites are provided for convenience only and
do not in any manner serve as an endorsement of those Web sites. The
materials at those Web sites are not part of the materials for this IBM product,
and use of those Web sites is at your own risk. Any performance data
contained herein was determined in a controlled environment. Therefore, the
result obtained in other operating environments may vary significantly. Some
measurements may have been made on development-level systems and there is
no guarantee that these measurements will be the same on generally available
systems. Furthermore, some measurements may have been estimated through
extrapolation. Actual results may vary. Users of this document should verify
the applicable data for their specific environment.
Trademarks
The following terms are trademarks of the IBM Corporation in the United
States or other countries or both:
IBM
HelpCenter
Microsoft, Windows, and Windows NT are trademarks or registered
trademarks of Microsoft in the United States or other countries or both.
Other company, product, and service names may be trademarks or service
marks of others.
D-12
V.90 PCI Data/Fax Modem: User’s Guide
Federal Communications Commission (FCC) statement
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
v Reorient or relocate the receiving antenna.
v Increase the separation between the equipment and receiver.
v Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
v Consult an IBM authorized dealer or service representative for help.
Properly shielded and grounded cables and connectors must be used in order
to meet FCC emission limits. Proper cables and connectors are available from
IBM authorized dealers. IBM is not responsible for any radio or television
interference caused by using other than recommended cables and connectors or
by unauthorized changes or modifications to this equipment. Unauthorized
changes or modifications could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Responsible party:
International Business Machines Corporation
New Orchard Road
Armonk, NY 10504
Telephone: 1-919-543-2193
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
Industry Canada Class B emission compliance statement
Appendix D. Product warranty and notices
D-13
This Class B digital apparatus complies with Canadian ICES-003.
Avis de conformite a la reglementation d’Industrie Canada
Cet appareil numérique de classe B est conforme à la norme NMB-003 du
Canada.
Deutsche EMV-Direktive (electromagnetische Verträglichkeit)
Dieses Gerät ist berechtigt in Übereinstimmung mit dem deutschen EMVG
vom 9.Nov.92 das EG-Konformitätszeichen zu führen.
Der Aussteller der Konformitätserklärung ist die IBM UK, Greenock.
Dieses Gerät erfüllt die Bedingungen der EN 55022 Klasse B.
European Union - emission directive
This product is in conformity with the protection requirements of EU Council
Directive 89/366/ECC on the approximation of the laws of the Member States
relating to electromagnetic compatibility.
IBM can not accept responsibility for any failure to satisfy the protection
requirements resulting from a non-recommended modification of the product,
including the fitting of non-IBM option cards.
This product has been tested and found to comply with the limits for Class B
Information Technology Equipment according to CISPR 22/European Standard
EN 55022. The limits for Class B equipment were derived for typical residential
environments to provide reasonable protection against interference with
licensed communication devices.
Union Européenne - Directive Conformité électromagnétique
Ce produit est conforme aux exigences de protection de la Directive
89/336/EEC du Conseil de l’UE sur le rapprochement des lois des États
membres en matière de compatibilité électromagnétique.
IBM ne peut accepter aucune responsabilité pour le manquement aux exigences
de protection résultant d’une modification non recommandée du produit, y
compris l’installation de cartes autres que les cartes IBM.
Ce produit a été testé et il satisfait les conditions de l’équipement informatique
de Classe B en vertu de CISPR22/Standard européen EN 55022. Les conditions
pour l’équipement de Classe B ont été définies en fonction d’un contexte
D-14
V.90 PCI Data/Fax Modem: User’s Guide
résidentiel ordinaire afin de fournir une protection raisonnable contre
l’interférence d’appareils de communication autorisés.
Unione Europea - Directiva EMC (Conformidad électromagnética)
Este producto satisface los requisitos de protección del Consejo de la UE,
Directiva 89/336/CEE en lo que a la legislatura de los Estados Miembros sobre
compatibilidad electromagnética se refiere.
IBM no puede aceptar responsabilidad alguna si este producto deja de
satisfacer dichos requisitos de protección como resultado de una modificación
no recomendada del producto, incluyendo el ajuste de tarjetas de opción que
no sean IBM.
Este producto ha sido probado y satisface los límites para Equipos Informáticos
Clase B de conformidad con el Estándar CISPR22 y el Estándar Europeo EN
55022. Los límites para los equipos de Clase B se han establecido para entornos
residenciales típicos a fin de proporcionar una protección razonable contra las
interferencias con dispositivos de comunicación licenciados.
Union Europea - Normativa EMC
Questo prodotto è conforme alle normative di protezione ai sensi della
Direttiva del Consiglio dell’Unione Europea 89/336/CEE sull’armonizzazione
legislativa degli stati membri in materia di compatibilità elettromagnetica.
IBM non accetta responsabilità alcuna per la mancata conformità alle
normative di protezione dovuta a modifiche non consigliate al prodotto,
compresa l’installazione di schede e componenti di marca diversa da IBM.
Le prove effettuate sul presente prodotto hanno accertato che esso rientra nei
limiti stabiliti per le le apparecchiature di informatica Classe B ai sensi del
CISPR 22/Norma Europea EN 55022. I limiti delle apparecchiature della Classe
B sono stati stabiliti al fine di fornire ragionevole protezione da interferenze
mediante dispositivi di comunicazione in concessione in ambienti residenziali
tipici.
Appendix D. Product warranty and notices
D-15
Japanese statement of compliance for products less than or equal to 20 A per
phase
Notice to New Zealand users
General
The grant of a Telepermit for any item of terminal equipment indicates only
that Telecom has accepted that the item complies with minimum conditions for
connection to its network. It indicates no endorsement of the product by
Telecom, nor does it provide any sort of warranty. Above all, it provides no
assurance that any item will work correctly in all respects with another item of
Telepermitted equipment of a different make or model, nor does it imply that
any product is compatible with all of Telecom’s network services. In particular
the higher speeds which this modem is capable of can only be achieved in
ideal conditions.
This equipment shall not be used in any manner which could constitute a
nuisance to other Telecom customers.
Some parameters required for compliance with Telecom’s Telepermit
requirements are dependent on the equipment (PC) associated with this device.
The associated equipment shall be set to operate within the following limits for
compliance with Telecom’s Specification:For repeat calls to the same number:
There shall be no more than 10 call attempts to the same number in any
30-minute period for any single manual call initiation, and
The equipment shall go off-line for a period of not less than 30 seconds
between the end of one attempt and the beginning of the next attempt.
For automatic calls to different numbers:
D-16
V.90 PCI Data/Fax Modem: User’s Guide
The equipment shall go on-hook for a period of not less than 5 seconds
between the end of one attempt and the beginning of the next attempt.
For automatically answered incoming calls: Incoming calls shall be answered
between 3 and 30 seconds from the start of applied ringing.
Appendix D. Product warranty and notices
D-17
D-18
V.90 PCI Data/Fax Modem: User’s Guide
Part Number: 22P6546
Printed in the United States of America
on recycled paper containing 10%
recovered post-consumer fiber.
(1P) P/N: 22P6546