Mitsubishi L40HV201 User`s manual

LCD4000
40" LCD Colour Monitor
User’s Manual
Index
Declaration of conformity ................................................................................................................................ English-1
Important Information ...................................................................................................................................... English-2
Warning, Caution ............................................................................................................................................ English-2
Declaration ...................................................................................................................................................... English-2
Safety Precautions, Maintenance & Recommended Use ............................................................................... English-3
Contents .......................................................................................................................................................... English-4
Parts Name and Functions ............................................................................................................................. English-5
Control Panel ......................................................................................................................................... English-5
Terminal Panel ....................................................................................................................................... English-6
Wireless Remote Control ...................................................................................................................... English-7
Operating Range for the Remote Control .............................................................................................. English-8
Handling the Remote Control ............................................................................................................ English-8
Setup Procedure ............................................................................................................................................. English-9
How to Mount and Attach Options to the LCD Monitor ................................................................................. English-10
Connections .................................................................................................................................................. English-12
Wiring Diagram .................................................................................................................................... English-12
Connecting a Personal Computer ....................................................................................................... English-13
Connect the LCD Monitor to a Personal Computer ......................................................................... English-13
Connecting to a Macintosh® Computer ............................................................................................... English-14
Connect the LCD Monitor to Macintosh® ......................................................................................... English-14
Connections with Digital Interface Equipment ..................................................................................... English-15
Connect the LCD Monitor to a Computer with a Digital Output ....................................................... English-15
Connecting a VCR ............................................................................................................................... English-16
Connect the LCD Monitor to a VCR or Laser Disc Player ............................................................... English-16
Connecting a DVD Player with component out .................................................................................... English-17
Connect the LCD Monitor to a DVD Player ..................................................................................... English-17
Connecting a Stereo Amplifier ............................................................................................................ English-18
Connect the LCD Monitor to a Stereo Amplifier .............................................................................. English-18
Basic Operation ............................................................................................................................................ English-19
Power ON and OFF Modes ................................................................................................................. English-19
Power Indicator .................................................................................................................................... English-20
Using Power Management .................................................................................................................. English-20
Selecting a video source ..................................................................................................................... English-20
Picture Size ......................................................................................................................................... English-20
Picture Mode ....................................................................................................................................... English-20
Information OSM ................................................................................................................................. English-20
OSM (On-Screen-Manager) Controls - Computer Input ............................................................................... English-21
PICTURE ............................................................................................................................................. English-21
SCREEN ............................................................................................................................................. English-22
AUDIO ................................................................................................................................................. English-23
PICTURE IN PICTURE ....................................................................................................................... English-23
CONFIGURATION 1 ............................................................................................................................ English-23
CONFIGURATION 2 ............................................................................................................................ English-24
OSM (On-Screen-Manager) Controls - DVD&HD Input ................................................................................ English-25
PICTURE ............................................................................................................................................. English-25
AUDIO ................................................................................................................................................. English-25
PICTURE IN PICTURE ....................................................................................................................... English-26
CONFIGURATION ............................................................................................................................... English-26
OSM (On-Screen-Manager) Controls - AV Input .......................................................................................... English-27
PICTURE ............................................................................................................................................. English-27
AUDIO ................................................................................................................................................. English-28
PICTURE IN PICTURE ....................................................................................................................... English-28
CONFIGURATION ............................................................................................................................... English-28
Controlling the LCD monitor via RS-232C Remote Control .......................................................................... English-30
Features ........................................................................................................................................................ English-32
TroubleShooting ............................................................................................................................................ English-33
Specifications for LCD4000 ........................................................................................................................... English-34
Pin Assignment ............................................................................................................................................. English-35
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
U.S. Responsible Party:
Address:
Tel. No.:
NEC-Mitsubishi Electronics Display of America, Inc.
1250 North Arlington Heights Road, Suite 500
Itasca, Illinois 60143-1248
(630) 467-3000
Type of Product:
Computer Monitor
Equipment Classification:
Class B Peripheral
Model:
LCD4000
We hereby declare that the equipment specified above
conforms to the technical standards as specified in the FCC Rules.
Windows is a registered trademark of Microsoft Corporation. NEC is a registered trademark of NEC Corporation. ENERGY STAR
is a U.S. registered trademark. All other brands and product names are trademarks or registered trademarks of their
respective owners.
As an ENERGY STAR® Partner, NEC-Mitsubishi Electronics Display of America has determined that this product meets the
ENERGY STAR guidelenes for energy efficiency. The ENERGY STAR emblem does not represent EPA endorsement of any product
or service.
Canadian Department of Communications Compliance Statement
DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No. 60950.
FCC Information
1. Use the attached specified cables with the LCD4000 (L40HV201) colour monitor so as not to interfere with radio and television
reception.
(1) Please use the supplied power cord or equivalent to ensure FCC compliance.
(2) Please use the supplied shielded video signal cable, 15-pin mini D-SUB to 15-pin mini D-SUB.
2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult your dealer or an experienced radio/TV technician for help.
If necessary, the user should contact the dealer or an experienced radio/television technician for additional suggestions. The user
may find the following booklet, prepared by the Federal Communications Commission, helpful: “How to Identify and Resolve RadioTV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington, D.C., 20402, Stock No.
004-000-00345-4.
English-1
English
DECLARATION OF CONFORMITY
Important Information
WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT
USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS
THE PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM
WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE
POWER CORD FROM THE AC OUTLET.DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause
electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.
This symbol alerts the user that important literature concerning the operation and maintenance of this unit
has been included. Therefore, it should be read carefully in order to avoid any problems.
Declaration
Declaration of the Manufacturer
We hereby certify that the colour monitor
LCD4000 is in compliance with
and marked with
Council Directive 73/23/EEC:
– EN 60950
Council Directive 89/336/EEC:
– EN 55022
– EN 61000-3-2
– EN 61000-3-3
– EN 55024
NEC-Mitsubishi Electric Visual
Systems Corporation
4-13-23, Shibaura,
Minato-Ku
Tokyo 108-0023, Japan
English-2
FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE
FOLLOWING WHEN SETTING UP AND USING THE
LCD4000 LCD COLOUR MONITOR:
•
DO NOT OPEN THE MONITOR. There are no user
serviceable parts inside and opening or removing covers
may expose you to dangerous shock hazards or other risks.
Refer all servicing to qualified service personnel.
Please follow the bylaws or rules of your municipality to dispose
of the lamps properly. Immediately unplug your monitor from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
•
When the power supply cord or plug is damaged.
•
If liquid has been spilled, or objects have fallen into the
monitor.
•
If the monitor has been exposed to rain or water.
•
If the monitor has been dropped or the cabinet damaged.
•
If the monitor does not operate normally by following
operating instructions.
•
Do not spill any liquids into the cabinet or use your monitor
near water.
•
Do not insert objects of any kind into the cabinet slots, as
they may touch dangerous voltage points, which can be
harmful or fatal or may cause electric shock, fire or
equipment failure.
•
Do not bend power cord.
•
Do not place any heavy objects on the power cord. Damage
to the cord may cause shock or fire.
•
Do not use monitor in high temperatured, humid, dusty, or
oily areas.
•
Do not place this product on a sloping or unstable cart,
stand or table, as the monitor may fall, causing serious
damage to the monitor.
•
If glass is broken, handle with care.
•
Do not cover vent on monitor.
•
If monitor or glass is broken, do not come in contact with the
liquid crystal and handle with care.
•
Allow adequate ventilation around the monitor so that heat
can properly dissipate. Do not block ventilated openings or
place the monitor near a radiator or other heat sources. Do
not put anything on top of monitor.
•
In UK, use a BS-approved power cord with molded plug
having a black (13A) fuse installed for use with this monitor.
If a power cord is not supplied with this monitor, please
contact your supplier.
The power cable connector is the primary means of
detaching the system from the power supply. The monitor
should be installed close to a power outlet which is easily
accessible.
•
•
Do not place any objects onto the monitor and do not use
the monitor outdoors.
Handle with care when transporting. Save packaging for
transporting.
Recommended Use
•
The inside of the fluorescent lamps located within the LCD
monitor contains mercury.
•
•
When operating the LCD4000 LCD monitor with its
AC 220-240V power supply, use a power supply cord that
matches the power supply voltage of the AC power outlet
being used. The power supply cord you use must have been
approved by and comply with the safety standards of your
country. (Type H05VV-F 3G 1mm2 should be used in
Europe)
•
For optimum performance, allow 20 minutes for warm-up.
•
Clean the LCD monitor surface with a lint-free, non-abrasive
cloth. Avoid using any cleaning solution or glass cleaner!
•
Do not bend power cord.
•
Do not use monitor in high temperature, humid, dusty, or
oily areas.
•
Adjust the monitor’s brightness and contrast controls to
enhance readability.
•
If glass is broken handle with care.
•
•
Do not cover vent on monitor.
•
If monitor or glass is broken, do not come in contact with the
liquid crystal and handle with care.
Avoid displaying fixed patterns on the monitor for long
periods of time to avoid image persistence (after-image
effects).
•
The lamp of backlight has a little mercury. Please handle it
appropriately in case of disposal.
•
Allow adequate ventilation around the monitor, so that heat
can properly dissipate. Do not block ventilated openings or
place the monitor near a radiator or other heat sources. Do
not put anything on top of the monitor.
•
The power cable connector is the primary means of
detaching the system from the power supply. The monitor
should be installed close to a power outlet, which is easily
accessible.
•
Handle with care when transporting. Save packaging for
transporting
•
Please follow the bylaws or rules of your municipality to
dispose of the tube properly.
•
Please clean the holes of back cabinet to reject dirt and
dust at least once a year because of set reliability.
English-3
English
Safety Precautions, Maintenance & Recommended Use
Contents
Your new LCD4000 LCD monitor box* should contain the following:
•
LCD4000 LCD monitor
•
Power Cord (3 m)
•
PC - Video Signal Cable SC-B113 (4 m)
•
User’s Manual
•
Wireless Remote Control and AA Batteries
•
Clamper x 2
•
Screw (M4 x 10) x 2
•
CD-ROM
•
Ferrite Core x 4
•
Stand for Independence x 2
•
Screw (M5 x 40 mm) for stand x 4
•
Band x 3
Ferrite Core x 4
Power Cord
PC - Video Signal Cable
(D-SUB to D-SUB Cable)
Clamper x 2
Screw (M4 x 10) x 2
Stand for the
Independence x 2
Screw
(M5 x 40 mm) for stand x 4
CD-ROM
REMOTE CONTROLLER RU-M104
User’s Manual
Wireless Remote Control and
AA Batteries
*
Install an attached stand at the time of unpacking when it uses with the stand.
*
Remember to save your original box and packing material to transport or ship the monitor.
The following components are prepared as option.
•
External Speaker Unit
English-4
Band x 3
English
Parts Name and Functions
Control Panel
buttons
1 POWER button ( )
7 DOWN ( ) button
Switches the power on/off. See also page 19.
Activates the OSM menu when the OSM menu is turned-off.
Acts as button to move the highlighted area down to
select the adjustment with OSM menu.
2 MUTE button
Switches the audio mute ON/OFF.
3 INPUT button
Acts as SET button with OSM menu.
Selects the signal connected with the RGB input connector.
Toggle switches between [RGB1], [RGB2], [RGB3],
[DVD/HD] and [VIDEO].
4 PLUS button
Acts as (+) button to increase the adjustment with OSM menu.
Increases the audio output level when the OSM menu is
turned off.
8 EXIT button
Activates the OSM menu when the OSM menu is turned-off.
Acts as EXIT button to move to previous menu with OSM
menu.
9 Remote control sensor and Power Indicator
Receives the signal from the remote control (when using the
wireless remote control). See also page 9.
Glows green when the LCD monitor is in active, glows red
when the LCD monitor is in POWER OFF mode and glows
green and red when the LCD monitor is in POWER SAVE
mode.
5 MINUS button
10 Main Power Switch
Acts as (-) button to decrease the adjustment with OSM menu.
Decreases the audio output level when the OSM menu is
turned off.
On/off switch to turn main power on and off.
11 Control Key Lock Mode
This control completely locks out access to all Control Key
functions. To activate the control key lock function, press
6 UP ( ) button
both of “ ” and “ ” and hold down simultaneously for
Activates the OSM menu when the OSM menu is turned-off.
more than 3 seconds. To resume back to user mode, press
Acts as button to move the highlighted area up to select
both of “ ” and “ ” and hold simultaneously for more
the adjustment with OSM menu.
than 3 seconds.
English-5
Terminal Panel
1 AC IN connector
6 AUDIO IN 1, 2, 3
Connects with the supplied power cord.
To input audio signal from external equipment such as a
computer, VCR or DVD player.
2 RGB 1 IN (DVI-D)
To input digital RGB signals from a computer having a digital
RGB output.
7 AUDIO OUT
To output the audio signal from the AUDIO IN 3 jack.
* This connector does not support analog input.
8 VIDEO
3 RGB 2 IN (mini D-Sub 15 pin)
To input analog RGB signals from a personal computer or
other RGB equipment.
4 RGB 3 DVD/HD [R/Cr/Pr, G/Y, B/Cb/Pb, H, V] (BNC)
IN connector: To input analog RGB signals or signals from
other RGB equipment.
This is also to connect equipment such as a DVD player and
HDTV laser disk player. A Sync-on-Green signal can be
connected to the G/Y connector.
VIDEO IN connector (BNC and RCA): To input a composite
video signal. BNC and RCA connectors are not available at
the same time. (Use only one input).
VIDEO OUT connector (BNC): To output the composite
video signal from the VIDEO IN connector.
S-VIDEO IN connector (DIN 4 pin): To input the S-video
(Y/C separate signal).
9 EXTERNAL CONTROL (mini D-Sub 9 pin)
IN connector: Use when operating the LCD monitor from
the RGB equipment like a computer.
5 RGB OUT connector (BNC)
10 EXTERNAL SPEAKER TERMINAL
To output the signal from RGB 2 and 3.
To output the audio signal from AUDIO 1 or 2 or 3 jack.
English-6
5
4
3
6 MUTE button
To switch the mute function on/off.
7 VOLUME UP button
Increase the audio output level.
8 VOLUME DOWN button
1
Decrease the audio output level.
9 PIP (Picture In Picture) button
2
ON/OFF button: Toggle switches between PIP-ON/
POP-ON/OFF. See page 23.
INPUT button: Select the “picture in picture” input signal.
CHANGE button: Replaces to the main picture and sub
picture.
6
9
7
10
8
11
13
10 STILL button
ON/OFF button: To switch the still picture mode on/off.
CAPTURE button: Capture the new picture.
14
11 DISPLAY button
17
16
To switch the OSM information on/off. See page 20.
15
12 AUTO SETUP button
To enter the auto setup menu. See page 23.
12
REMOTE CONTROLLER RU-M104
19
13 MENU button
To switch the menu mode on/off.
14 UP button
Acts as button to move the highlighted area up to select
the adjustment with OSM menu.
Small screen which adjusted “PIP” mode moves up.
18
1 POWER button
15 DOWN button
Switches the power on/off.
Acts as button to move the highlighted area down to
select the adjustment with OSM menu.
Small screen which adjusted “PIP” mode moves down.
* If Power Indicator is not glowing, then none of the controls
will work.
16 MINUS button decrease
2 INPUT button
Selects from input signal, [RGB1], [RGB2], [RGB3],
[DVD/HD], [VIDEO].
Acts as (-) button to decrease the adjustment with OSM
menu.
Small screen which adjusted “PIP” mode moves left.
3 AUDIO INPUT button
17 PLUS button increase
Selects from input audio signal, [AUDIO1], [AUDIO2],
[AUDIO3].
Acts as (+) button to increase the adjustment with OSM
menu.
Small screen which adjusted “PIP” mode moves right.
4 SIZE button
18 SET button
Selects picture size, [FULL], [NORMAL], [WIDE].
See page 20.
Acts as SET button with OSM menu.
5 PICTURE MODE button
19 EXIT button
Selects from picture mode, [HIBRIGHT], [STANDARD],
[sRGB], [CINEMA].
Turn to previous menu with OSM menu.
HIBRIGHT: for moving images
STANDARD: for images
sRGB: for text based images
CINEMA: for movies. See page 20.
English-7
English
Wireless Remote Control
Operating Range for the Remote Control
Point the top of the remote control toward the LCD monitor’s
remote sensor during button operation.
Handling the remote control
Use the remote control within a distance of about 7 m from
the front of the LCD monitor’s remote control sensor and at
a horizontal and vertical angle of within 30° within a distance
of about 3 m.
*
Do not subject to strong shock.
*
Do not allow water or other liquid to splash the remote
control. If the remote control gets wet, wipe it dry
immediately.
*
Avoid exposure to heat and steam.
Caution:
Important the remote control system may not
function when direct sunlight or strong
illumination strikes the remote control sensor of
the LCD monitor, or when there is an obstacle in
the path.
English-8
1. Determine the installation location
3. Connect external equipment
(See pages 12~18)
CAUTION: DO NOT ATTEMPT TO INSTALL THE LCD
MONITOR BY YOURSELF
Installing your LCD display must be done by a qualified
technician. Contact your dealer for more information.
•
To protect the connected equipment, turn off the main
power before making connections.
•
Refer to your equipment user manual.
4. Connect the supplied power cord
CAUTION: MOVING OR INSTALLING THE LCD
MONITOR MUST BE DONE BY TWO OR
MORE PEOPLE.
•
The power outlet socket should be installed as near to
the equipment as possible, and should be easily
accessible.
Failure to follow this caution may result in injury if the LCD
monitor falls.
•
Fully insert the prongs into the power outlet socket.
Loose connection may cause noise.
IMPORTANT: Lay the protective sheet, which was wrapped
around the LCD monitor when it was
packaged, beneath the LCD monitor so as
not to scratch the panel.
5. Switch on the power of all attached
external equipment
2. Install the remote control batteries
When connected with a computer, switch on the power of
the computer first.
6. Adjust the sound
The remote control is powered by 1.5V AA batteries.
To install or replace batteries:
1. Press and slide to open the cover.
Make adjustments when adjustment of the volume is
required.
2. Align the batteries according to the (+) and (–)
indications inside the case.
7. Adjust the screen (See pages 21~29)
3. Replace the cover.
Make adjustments when adjustment of the screen display
position or distortion is required.
➀ Remove the cover
➁ Insert the batteries ➂ Replace the cover
8. Adjust the image (See pages 21~29)
Make adjustments when picture adjustment such as the
brightness or contrast is required.
9. In case of portrait position
CAUTION: Incorrect use of batteries can result in leaks
or bursting.
•
Remove the stand.
•
Left side of monitor must become upper side (seen from
front).
Be careful especially about the following points.
•
Place “AA” size batteries matching the + and - signs on
each battery to the + and - signs of the battery
compartment.
•
Don’t mix battery types.
•
Don’t combine new batteries with used ones.
It causes shorter battery life or leakage of batteries.
•
Remove dead batteries immediately to prevent battery
liquid from leaking into the battery compartment.
Don’t touch leaked liquid, it causes damages to your
skin.
NOTE: If you do not intend to use the Remote Control for a
long period, remove the batteries.
English-9
English
Setup Procedure
How to Mount and Attach Options to the LCD Monitor
You can attach mounting accessories to the LCD monitor in
one of the following two ways:
Ventilation Requirements for enclosure
mounting
In the upright position
To allow heat to disperse, leave space between surrounding
objects as shown in the diagram to the right.
Ambient temperature should be less than 40°C.
*
100mm
100mm
100mm
*
100mm
* Use some fans as needed.
100mm
To avoid falling down
Lay the screen face down
Protective Sheet
Fasten the LCD monitor to wall or pillar with a cord or chain
which is sufficient to support the weight of the LCD monitor
(approx. 31.5kg).
400mm
Screw Holes
Cord or Chain
Table
Tabletop Stand
Clamper
Screw
Lay the protective sheet on a table, which was wrapped
around the monitor when it was packaged, beneath the
screen surface so as not to scratch the screen face.
This device cannot be used or installed without the Tabletop
Stand or other mounting accessory. Failure to follow correct
mounting procedures could result in damage to the
equipment or injury to the user or installer. Product warranty
does not cover damage caused by improper installation.
Failure to follow these recommendations could result in
voiding your warranty.
Before moving the LCD monitor, the cord or chain should be
removed.
When using with other mounting accessory, it must be a
VESA-compatible mounting method and the screws must be
M6 of size and 8mm or longer of length under consideration
of the thickness of the mounting method. (Recommended
torque: 274 ~ 362N.cm). NEC recommends using mounting
interface that comply with UL1678 standard in North
America.
English-10
English
How to install stand
1. Please turn monitor off.
2. Insert claws of monitor to stand holes until clicks.
3. Fasten 2 screws (M5 x 40) of both side.
Torque 280 ~ 300N cm
Screw M5 x 40
Hole of stand
Claw of
Monitor
Stand
How to remove the stand
1. Spread the protective sheet on the flat surface, such as a desk.
2. Place monitor on the protective sheet.
3. Remove 2 screws of each stand with a screw driver and keep them for reuse.
English-11
Connections
Before making connections:
*
First turn off the power of all equipment to be attached.
*
Refer to the user manual in regard to this equipment.
Wiring Diagram
LCD monitor
Personal computer
DVD player
Personal computer
HD laser disk player
VCR
LCD monitor (second monitor)
Equipment with
digital interface
Attaching the Ferrite Core
Mounting Position of Ferrite Core
Attach the Ferrite Core to PC Audio Cable and S-VIDEO Cable.
Use of the cable without mounting the ferrite core will result in the
occurrence of noise.
For PC Audio Cable
1 Open the ferrite core and clamp it
on the PC Audio cable.
2 Close the ferrite core.
Attach the two Ferrite Cores to the both ends of PC Audio Cable.
Ferrite Core
Ferrite Core
Ferrite Core
To AUDIO 1 of monitor
To connector of PC
Band
Band
For S-VIDEO Cable
1 Open the ferrite core and clamp it
on the S-VIDEO cable.
Ferrite Core
2 Close the ferrite core.
Attach the two Ferrite Cores to the end of S-VIDEO Cable.
Only S-VIDEO IN side of monitor.
Ferrite Core
To S-VIDEO IN
of monitor
English-12
Band
To S-VIDEO out of VCR
or Laser disk player
Connecting your computer to your LCD monitor will enable you to display your computer’s screen image.
Some video cards may not be able to create a correct image resolution.
Connect the LCD Monitor to a Personal Computer
•
To connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor, use the supplied PC - Video RGB signal
cable (mini D-sub 15 pin to mini D-sub 15 pin).
•
To connect the RGB 3 DVD/HD IN connector (BNC) on the LCD monitor, use a signal cable which is available separately
(mini D-sub 15 pin to BNC x 5). Select RGB 3 from the INPUT button.
When connecting one or more LCD monitors, use the RGB OUT connector (BNC).
The AUDIO IN 1 can be used for audio input. For connection, select AUDIO 1 from the AUDIO INPUT button.
LCD monitor
To audio output
To analog RGB output
Mini D-sub 15 pin
Mini D-sub
15 pin
•
BNC x 5
PC or IBM compatible
BNC x 5
To RGB 3
DVD/HD IN
BNC x 5
LCD monitor (second monitor)
English-13
English
Connecting a Personal Computer
Connecting to a Macintosh® Computer
Connecting your Macintosh® computer to your LCD monitor will enable you to display your computer’s screen image. Some
video cards or drivers may not display images correctly.
Connect the LCD Monitor to Macintosh®
•
To connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor, use the supplied PC - Video RGB signal
cable (mini D-sub 15 pin to mini D-sub 15 pin).
•
To connect the RGB 3 DVD/HD IN connector (BNC) on the LCD monitor, use the signal cable available separately
(mini D-sub 15 pin to BNC x 5).
•
If you use with a Macintosh PowerBook, set “Mirroring” to Off.
Refer to your Macintosh’s owner’s manual for more information about your computer’s video output requirements and any
special identification or configuring your monitor’s image and monitor may require.
The AUDIO IN 1 can be used for audio input. For connection, select AUDIO 1 from the AUDIO INPUT button.
LCD monitor
To audio output
To analog RGB output
Mini D-sub 15 pin
Mini D-sub
15 pin
•
BNC x 5
BNC x 5
To RGB 3
DVD/HD IN
BNC x 5
LCD monitor (second monitor)
English-14
Macintosh
Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual
Interface) standard.
Connect the LCD Monitor to a Computer with a Digital Output
•
The RGB 1 IN connector also accepts a DVI-D cable.
•
Input TMDS signals conforming to DVI standards.
•
To maintain display quality, use a cable with a quality prescribed by DVI standards.
•
The AUDIO IN 1 can be used for audio input. For connection, select AUDIO 1 from the AUDIO INPUT button.
LCD monitor
To audio output
To DVI output
DVI-D connector
DVI-D connector
English-15
Equipment with a
digital interface such
as a personal
computer with RGB
output (TMDS)
English
Connections with Digital Interface Equipment
Connecting a VCR
Connecting your VCR or laser disc player to your LCD monitor will enable you to display your VCR’s or laser disc player’s
video. Refer to your VCR or laser disc player owner’s manual for more information.
Connect the LCD Monitor to a VCR or Laser Disc Player
•
Video signals can be connected to either the VIDEO IN [RCA or BNC] or the S-VIDEO IN connector.
NOTE:
S-VIDEO is priority input.
Only one of the connectors, either RCA or BNC, can be used alternatively.
When connecting one or more LCD monitors in addition, use the VIDEO OUT connectors (BNC).
•
The AUDIO IN 2 and 3 can be both used for audio input. For connection, select [AUDIO 2] or [AUDIO 3] from the AUDIO
INPUT button.
LCD monitor
RCA
To VIDEO OUT
VCR or Laser disc player
RCA
DIN 4 pin
To S-VIDEO OUT
DIN 4 pin
To audio right output
Video output will be from the OUT connector.
•
To audio
left output
•
BNC
ToToVIDEO
VIDEOIN
IN
BNC
LCD monitor (second monitor)
English-16
English
Connecting a DVD Player with component out
Connecting your DVD player to your LCD monitor will enable you to display DVD video.
Refer to your DVD player user’s manual for more information.
Connect the LCD Monitor to a DVD Player
To connect the RGB 3 DVD/HD In connector (BNC) on the LCD monitor, use a separately available BNC connector cable.
You will need a separately available BNC-to-RCA adapter to connect a DVD player with an RCA pin jack to the BNC
connector cable.
Some DVD players may have different connectors such as Cr/Pr, Y and Cb/Pb.
Select [DVD/HD] input mode from the INPUT button.
When connecting one or more LCD monitors, use the RGB 3 OUT connectors (BNC).
To audio right output
BNC x 3
BNC-to-RCA
adapter
LCD monitor
To audio left output
The AUDIO IN 2 and 3 (both RCA) can be used for audio input. For connection, select [AUDIO 2] or [AUDIO 3] from the
AUDIO INPUT button.
To DVD Component video output
DVD player
BNC x 3
RCA
•
BNC x 3
BNC x 3
To RGB 3 DVD/HD IN
LCD monitor (second monitor)
English-17
Connecting a Stereo Amplifier
You can connect your stereo amplifier to your LCD monitor. Refer to your amplifier user’s manual for more information.
Connect the LCD Monitor to a Stereo Amplifier
•
Turn on the LCD monitor and the amplifier only after all connections have been made.
•
Use an RCA cable to connect the AUDIO OUT connector (RCA) on the LCD monitor and the audio input on the amplifier.
•
Do not reverse the audio left and right jacks.
•
The AUDIO IN is used for audio input.
•
The AUDIO OUT jack loops through the AUDIO IN 3 only.
LCD monitor
To audio right output
To audio left output
VCR or Laser disc player
RCA
Amplifier
RCA
To audio right input
To audio left input
External speaker
English-18
External speaker
English
Basic Operation
Power ON and OFF Modes
The LCD monitor power indicator will turn green while powered on, or red when in off mode. The monitor can be powered on
or off using the following three options:
1. Pressing the power button.
Note:
Before operating the remote control, be sure to turn
on the Main Power Switch on LCD monitor.
Power Switch
2. Using the remote control.
Note:
Before operating the remote control, be sure to turn
on the Main Power Switch on the LCD monitor.
REMOTE CONTROLLER RU-M104
3. Pressing the Main Power Switch.
Note:
Main Power Switch
English-19
When the Main Power Switch is used to power off
the LCD, the remote control and the power switch
will not activate the on mode. Be sure to turn the
Main Power Switch to the on mode before using
these two options.
Power Indicator
Information OSM
RGB1, 2, 3
Power ON
Status
Green
Power OFF
Red
Power Standby
Red and Green
RGB2
1024 x 768
)
48kHz 60Hz
AUDIO : 1
SCREEN SIZE : FULL
Using Power Management
The LCD monitor follows the VESA approved DPMS Power
Management function.
The power management function is an energy saving
function that automatically reduces the power consumption
of the display when the keybord or the mouse has not been
used for a fixed period.
Video Input mode
Input signal Information
Audio input mode
Picture Size mode
DVD/HD
DVD/HD
AUDIO : 3
SCREEN SIZE : WIDE
Video Input mode
Audio input mode
Picture Size mode
Selecting a video source
To view a video source:
VIDEO
Use the input button to set [VIDEO].
Press the VIDEO button.
VIDEO<S>
NTSC
AUDIO : 3
SCREEN SIZE : NORMAL
Use the COLOR SYSTEM menu to set [PAL], [SECAM], in
according to your video format.
Video Input mode
Input Signal Colour System mode
Audio input mode
Picture Size mode
Picture Size
RGB 1, 2, 3
FULL*
NORMAL
DVD/HD, Video
WIDE
FULL
FULL
NORMAL
PIP or POP
NORMAL
Main:RGB2
Sub:VIDEO<S>
WIDE
RGB2
1024 x 768
48kHz 60Hz
AUDIO : 1
VIDEO<S>
)
NTSC
SCREEN SIZE : FULL
*NOTE: Full only in case of W-XGA (1280 x 768)
Picture Mode
RGB 1, 2, 3
HIBRIGHT
sRGB
STANDARD
DVD/HD, Video
HIBRIGHT
CINEMA
STANDARD
English-20
Main picture Information
Sub picture Information
Main picture Information
Press UP or DOWN button
to select sub-menu
SET
Remote Control
Press SET button to
decide
Press UP or DOWN, and PLUS or
MINUS button to select function, or
control which you like
Press MENU or EXIT
button to decide
MENU
SET
SET
SET
EXIT
Press UP or DOWN button
to select
Press INPUT button
to decide
Press UP or DOWN button to
select
Press INPUT button
to decide
INPUT
INPUT
Control Panel
UP or DOWN button
INPUT button
BRIGHTNESS
BRIGHTNESS
CONTRAST
SHARPNESS
BLACK LEVEL
COLOR CONTROL
COLOR TEMPERATURE
PICTURE RESET
OSM screen
:SEL
:SEL EXIT:PRE SET:NEXT MENU:END
EXIT:PRE
MENU:END
Main-Menu
PICTURE
SCREEN
AUDIO
PICTURE IN PICTURE
CONFIGURATION 1
CONFIGURATION 2
PICTURE
Sub-Menu
BRIGHTNESS
:SEL EXIT:PRE SET:NEXT MENU:END
BRIGHTNESS
CONTRAST
SHARPNESS
BLACK LEVEL
COLOR CONTROL
COLOR TEMPERATURE
PICTURE RESET
50
-
:SEL EXIT:PRE SET:NEXT MENU:END
CONTRAST
*:INPUT RGB2/3 only
SHARPNESS
*:INPUT RGB2/3 only
BLACK LEVEL
*:INPUT RGB2/3 only
BRIGHTNESS
CONTRAST
SHARPNESS
BLACK LEVEL
COLOR CONTROL
COLOR TEMPERATURE
PICTURE RESET
EXIT:PRE
MENU:END
50
-
+
:SEL
EXIT:PRE
MENU:END
SHARPNESS
50
-
+
:SEL
EXIT:PRE
MENU:END
BLACK LEVEL
50
-
+
:SEL
:SEL EXIT:PRE SET:NEXT MENU:END
EXIT:PRE
COLOR CONTROL
:SEL EXIT:PRE SET:NEXT MENU:END
R
Y
G
C
B
M
S
0
0
0
0
0
0
0
:SEL
EXIT:PRE
Press + button to increase contrast.
Press - button to decrease contrast.
This function is digitally capable to keep crisp image
at any timings. It is continuously adjustable to get
distinct image or soft one as you prefer and set
independently by different timing.
Press + button to increase sharpness.
Press - button to decrease sharpness.
Press + button to increase black level.
Press - button to decrease black level.
MENU:END
COLOR CONTROL
BRIGHTNESS
CONTRAST
SHARPNESS
BLACK LEVEL
COLOR CONTROL
COLOR TEMPERATURE
PICTURE RESET
Press + button to increase brightness.
Press - button to decrease brightness.
Adjusts the image brightness in relation to the back
ground
CONTRAST
:SEL EXIT:PRE SET:NEXT MENU:END
BRIGHTNESS
CONTRAST
SHARPNESS
BLACK LEVEL
COLOR CONTROL
COLOR TEMPERATURE
PICTURE RESET
+
:SEL
:SEL EXIT:PRE SET:NEXT MENU:END
BRIGHTNESS
CONTRAST
SHARPNESS
BLACK LEVEL
COLOR CONTROL
COLOR TEMPERATURE
PICTURE RESET
Adjusts the overall image and background screen
brightness.
BRIGHTNESS
MENU:END
English-21
Six colour presets select the desired colour setting.
Colour temperature increases or decreases, in each
preset. R, Y, G, C, B, M, S: Increases or decreases
Red, Yellow, Green, Cyan, Blue magenta and
Saturation depending upon when is selected. The
change in colour will appear on screen and the direction
(increase or decrease) will be shown by the colour bars.
English
OSM (On-Screen-Manager) Controls - Computer Input
COLOR
TEMPERATURE
BRIGHTNESS
CONTRAST
SHARPNESS
BLACK LEVEL
COLOR CONTROL
COLOR TEMPERATURE
PICTURE RESET
COLOR TEMPERATURE
L
:SEL
:SEL EXIT:PRE SET:NEXT MENU:END
PICTURE RESET
H
EXIT:PRE
MENU:END
Selecting Picture reset allows you to reset all OSM
settings related to PICTURE.
PICTURE RESET
BRIGHTNESS
CONTRAST
SHARPNESS
BLACK LEVEL
COLOR CONTROL
COLOR TEMPERATURE
PICTURE RESET
To adjust the colour temperature of entire screen.
Adjusting power colour temperature make the screen
reddish and adjusting higher colour temperature make
the screen bluish.
NO
YES
:SEL
:SEL EXIT:PRE SET:NEXT MENU:END
EXIT:PRE
MENU:END
Select “Yes” and press “SET” button to restore to
factory preset.
Main-Menu
PICTURE
SCREEN
AUDIO
PICTURE IN PICTURE
CONFIGURATION 1
CONFIGURATION 2
SCREEN
Sub-Menu
H POSITION
:SEL EXIT:PRE SET:NEXT MENU:END
H POSITION
V POSITION
CLOCK
CLOCK PHASE
H RESOLUTION
V RESOLUTION
SCREEN RESET
50
-
V POSITION
CLOCK
*:INPUT RGB2/3 only
EXIT:PRE
MENU:END
50
-
:SEL
EXIT:PRE
+
MENU:END
CLOCK
-
+
:SEL
:SEL EXIT:PRE SET:NEXT MENU:END
EXIT:PRE
Press + button to move screen to right.
Press - button to move screen to left.
Controls Vertical Image position within the display
area of the LCD.
V POSITION
:SEL EXIT:PRE SET:NEXT MENU:END
H POSITION
V POSITION
CLOCK
CLOCK PHASE
H RESOLUTION
V RESOLUTION
SCREEN RESET
+
:SEL
:SEL EXIT:PRE SET:NEXT MENU:END
H POSITION
V POSITION
CLOCK
CLOCK PHASE
H RESOLUTION
V RESOLUTION
SCREEN RESET
Controls Horizontal Image position within the display
area of the LCD.
H POSITION
Press + button to move screen to UP.
Press - button to move screen to DOWN.
Press + button to expand the width of the image on
the screen to the right.
Press - button to narrow the width of the image on the
screen to the left.
MENU:END
To change the snow noise of the image.
CLOCK PHASE
*:INPUT RGB2/3 only
H RESOLUTION
H POSITION
V POSITION
CLOCK
CLOCK PHASE
H RESOLUTION
V RESOLUTION
SCREEN RESET
CLOCK PHASE
-
:SEL
:SEL EXIT:PRE SET:NEXT MENU:END
H POSITION
V POSITION
CLOCK
CLOCK PHASE
H RESOLUTION
V RESOLUTION
SCREEN RESET
V RESOLUTION
:SEL EXIT:PRE SET:NEXT MENU:END
SCREEN RESET
H POSITION
V POSITION
CLOCK
CLOCK PHASE
H RESOLUTION
V RESOLUTION
SCREEN RESET
:SEL EXIT:PRE SET:NEXT MENU:END
EXIT:PRE
MENU:END
H RESOLUTION
1024
-
+
:SEL
:SEL EXIT:PRE SET:NEXT MENU:END
H POSITION
V POSITION
CLOCK
CLOCK PHASE
H RESOLUTION
V RESOLUTION
SCREEN RESET
+
EXIT:PRE
MENU:END
V RESOLUTION
768
-
+
:SEL
EXIT:PRE
MENU:END
Adjusts the horizontal size by increasing or
decreasing the setting.
Press + button to expand the width of the image on
the screen.
Press - button to narrow the width of the image on
the screen.
Adjusts the vertical size by increasing or decreasing
the setting.
Press + button to expand the height of the image on
the screen.
Press - button to narrow the height of the image on
the screen.
Selecting Screen reset allow you to reset all OSM
setting about SCREEN setting.
SCREEN RESET
NO
YES
:SEL
EXIT:PRE
MENU:END
English-22
Select “Yes” and press “SET” button to decide to
restore to factory preset.
PICTURE
SCREEN
AUDIO
PICTURE IN PICTURE
CONFIGURATION 1
CONFIGURATION 2
AUDIO
Sub-Menu
:SEL EXIT:PRE SET:NEXT MENU:END
To accentuate or reduce the high frequency sound.
TREBLE
BASS
AUDIO RESET
TREBLE
TREBLE
-
+
:SEL
:SEL EXIT:PRE SET:NEXT MENU:END
EXIT:PRE
Press + button to increase TREBLE sound.
Press - button to decrease TREBLE sound.
MENU:END
To accentuate or reduce the low frequency sound.
TREBLE
BASS
AUDIO RESET
BASS
:SEL EXIT:PRE SET:NEXT MENU:END
AUDIO RESET
TREBLE
BASS
AUDIO RESET
:SEL EXIT:PRE SET:NEXT MENU:END
BASS
-
+
:SEL
EXIT:PRE
Press + button to increase BASS sound.
Press - button to decrease BASS sound.
MENU:END
Selecting Picture reset allows you to reset all OSM
settings related to AUDIO.
AUDIO RESET
NO
YES
:SEL
EXIT:PRE
MENU:END
Select “Yes” and press “SET” button to restore to
factory preset.
Main-Menu
PICTURE
SCREEN
AUDIO
PICTURE IN PICTURE
CONFIGURATION 1
CONFIGURATION 2
PICTURE IN PICTURE
Sub-Menu
:SEL EXIT:PRE SET:NEXT MENU:END
Selecting the size of picture inserted at the “Picture-in
Picture” (PIP) mode.
“Large”, “Middle”, “Small” and “REMOTE-PIP” are
available.
PIP SIZE
PIP SIZE
PIP AUDIO
PIP RESET
PIP SIZE
:SEL EXIT:PRE SET:NEXT MENU:END
LARGE
MIDDLE
SMALL
REMOTE-PIP
:SEL
EXIT:PRE
MENU:END
Selecting the sound source in PIP mode. When
selecting “MAIN AUDIO”, you get the sound for the
main picture and when selecting “PIP AUDIO”, you get
the sound for the picture inserted.
PIP AUDIO
PIP SIZE
PIP AUDIO
PIP RESET
PIP AUDIO
:SEL EXIT:PRE SET:NEXT MENU:END
MAIN AUDIO
PIP AUDIO
:SEL
EXIT:PRE
MENU:END
Selecting Picture reset allows you to reset all OSM
settings related to PIP.
PIP RESET
PIP SIZE
PIP AUDIO
PIP RESET
PIP RESET
:SEL EXIT:PRE SET:NEXT MENU:END
NO
YES
:SEL
EXIT:PRE
MENU:END
Select “Yes” and press “SET” button to restore to
factory preset.
Main-Menu
PICTURE
SCREEN
AUDIO
PICTURE IN PICTURE
CONFIGURATION 1
CONFIGURATION 2
CONFIGURATION 1
Sub-Menu
AUTO SETUP
*:INPUT RGB2/3 only
AUTO ADJUST
*:INPUT RGB2/3 only
AUTO BRIGHTNESS
*:INPUT RGB2/3 only
:SEL EXIT:PRE SET:NEXT MENU:END
AUTO SETUP
AUTO ADJUST
AUTO BRIGHTNESS
POWER SAVE
LANGUAGE
OSM TIME
OFF TIMER
SCREEN SAVER
FACTORY PRESET
:SEL EXIT:PRE SET:NEXT MENU:END
AUTO SETUP
AUTO ADJUST
AUTO BRIGHTNESS
POWER SAVE
LANGUAGE
OSM TIME
OFF TIMER
SCREEN SAVER
FACTORY PRESET
:SEL EXIT:PRE SET:NEXT MENU:END
AUTO SETUP
AUTO ADJUST
AUTO BRIGHTNESS
POWER SAVE
LANGUAGE
OSM TIME
OFF TIMER
SCREEN SAVER
FACTORY PRESET
:SEL EXIT:PRE SET:NEXT MENU:END
Select “Yes” and press “SET” button to automatically
adjust horizontal position, vertical position, clock,
clock-phase, black level.
AUTO SETUP
NO
YES
:SEL
EXIT:PRE
MENU:END
Selecting the auto adjust ON/OFF.
When select “ON”, the clock-phase will be
automatically adjusted.
AUTO ADJUST
ON
OFF
:SEL
EXIT:PRE
MENU:END
AUTO BRIGHTNESS
ON
OFF
:SEL
EXIT:PRE
MENU:END
English-23
Selecting the auto brightness ON/OFF.
When select “ON”, the brightness will be
automatically adjusted.
English
Main-Menu
POWER SAVE
Selecting the power management ON/OFF mode.
AUTO SETUP
AUTO ADJUST
AUTO BRIGHTNESS
POWER SAVE
LANGUAGE
OSM TIME
OFF TIMER
SCREEN SAVER
FACTORY PRESET
POWER SAVE
ON
OFF
:SEL
:SEL EXIT:PRE SET:NEXT MENU:END
AUTO SETUP
AUTO ADJUST
AUTO BRIGHTNESS
POWER SAVE
LANGUAGE
OSM TIME
OFF TIMER
SCREEN SAVER
FACTORY PRESET
LANGUAGE
OSM TIME
:SEL EXIT:PRE SET:NEXT MENU:END
AUTO SETUP
AUTO ADJUST
AUTO BRIGHTNESS
POWER SAVE
LANGUAGE
OSM TIME
OFF TIMER
SCREEN SAVER
FACTORY PRESET
OFF TIMER
:SEL EXIT:PRE SET:NEXT MENU:END
SCREEN SAVER
AUTO SETUP
AUTO ADJUST
AUTO BRIGHTNESS
POWER SAVE
LANGUAGE
OSM TIME
OFF TIMER
SCREEN SAVER
FACTORY PRESET
:SEL EXIT:PRE SET:NEXT MENU:END
FACTORY PRESET
AUTO SETUP
AUTO ADJUST
AUTO BRIGHTNESS
POWER SAVE
LANGUAGE
OSM TIME
OFF TIMER
SCREEN SAVER
FACTORY PRESET
:SEL EXIT:PRE SET:NEXT MENU:END
MENU:END
OSM control menus are available in seven languages.
LANGUAGE
ENGLISH
DEUTSCH
ESPAÑOL
FRANÇAIS
ITALIANO
SVENSKA
JAPAN
:SEL
:SEL EXIT:PRE SET:NEXT MENU:END
AUTO SETUP
AUTO ADJUST
AUTO BRIGHTNESS
POWER SAVE
LANGUAGE
OSM TIME
OFF TIMER
SCREEN SAVER
FACTORY PRESET
EXIT:PRE
EXIT:PRE
MENU:END
OSM TIME
5
-
+
:SEL
EXIT:PRE
MENU:END
OFF TIMER
ON
OFF
:SEL
24H
EXIT:PRE
In the OSM Time menu, you can select how long the
OSM information will stay after Display key push.
A time between 3 and 30 seconds, is available.
MENU:END
To select OFF TIMER mode ON/OFF.
In the OFF TIMER menu, you can select how long
monitor auto turn off time after monitor has been
turned on.
A time between 1 and 24 hours, is available.
To select SCREEN SAVER mode, select ON/OFF.
SCREEN SAVER
ON
OFF
:SEL
EXIT:PRE
MENU:END
FACTORY PRESET
Selecting YES allows you to reset all OSM control
settings back to the factory settings.
NO
YES
:SEL
EXIT:PRE
MENU:END
Main-Menu
PICTURE
SCREEN
AUDIO
PICTURE IN PICTURE
CONFIGURATION 1
CONFIGURATION 2
CONFIGURATION 2
Sub-Menu
:SEL EXIT:PRE SET:NEXT MENU:END
LONG CABLE ON/OFF
LONG CABLE MANUAL
ON
OFF
LONG CABLE
ON/OFF
*:INPUT RGB2/3 only
:SEL EXIT:PRE SET:NEXT MENU:END
LONG CABLE ON/OFF
LONG CABLE MANUAL
LONG CABLE
MANUAL
*:INPUT RGB2/3 only
Enabling long cable compensation can be
performed. If ON, enforcement of an AUTO Set Up
performes the compensation algorithm.
See attached CD-ROM for the adjustment.
LONG CABLE
:SEL EXIT:PRE SET:NEXT MENU:END
:SEL
EXIT:PRE
MENU:END
LONG CABLE MANUAL
R DELAY
0
G DELAY
0
B DELAY
0
R SHARPNESS
0
G SHARPNESS
0
B SHARPNESS
0
SOG PEAK
0
:SEL
EXIT:PRE
MENU:END
English-24
Degradation of image quality when using long analog
signal cables can be adjusted manually for optimum
image quality.
English
OSM (On-Screen-Manager) Controls - DVD&HD Input
Main-Menu
PICTURE
AUDIO
PICTURE IN PICTURE
CONFIGURATION
PICTURE
Sub-Menu
BRIGHTNESS
:SEL EXIT:PRE SET:NEXT MENU:END
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
BLACK LEVEL
PICTURE RESET
50
-
:SEL EXIT:PRE SET:NEXT MENU:END
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
BLACK LEVEL
PICTURE RESET
CONTRAST
SHARPNESS
+
:SEL
EXIT:PRE
MENU:END
50
-
+
:SEL
EXIT:PRE
MENU:END
SHARPNESS
50
-
:SEL EXIT:PRE SET:NEXT MENU:END
Press + button to increase brightness.
Press - button to decrease brightness.
Adjusts the image brightness in relation to the back
ground
CONTRAST
:SEL EXIT:PRE SET:NEXT MENU:END
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
BLACK LEVEL
PICTURE RESET
Adjusts the overall image and background screen
brightness.
BRIGHTNESS
+
:SEL
EXIT:PRE
MENU:END
Press + button to increase contrast.
Press - button to decrease contrast.
This function is digitally capable to keep crisp image
at any timings. It is continuously adjustable to get
distinct image or soft one as you prefer and set
independently by different timing.
Press + button to increase sharpness.
Press - button to decrease sharpness.
Adjust the color depth of the screen.
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
BLACK LEVEL
PICTURE RESET
COLOR
COLOR
-
:SEL EXIT:PRE SET:NEXT MENU:END
BLACK LEVEL
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
BLACK LEVEL
PICTURE RESET
:SEL
EXIT:PRE
Press + button to increase colour depth.
Press - button to decrease colour depth.
MENU:END
BLACK LEVEL
-
:SEL EXIT:PRE SET:NEXT MENU:END
PICTURE RESET
+
+
:SEL
EXIT:PRE
MENU:END
Selecting Picture reset allows you to reset all OSM
settings related to PICTURE.
PICTURE RESET
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
BLACK LEVEL
PICTURE RESET
Press + button to increase black level.
Press - button to decrease black level.
NO
YES
:SEL EXIT:PRE SET:NEXT MENU:END
:SEL
EXIT:PRE
MENU:END
Select “Yes” and press “SET” button to restore to
factory preset.
Main-Menu
PICTURE
AUDIO
PICTURE IN PICTURE
CONFIGURATION
AUDIO
Sub-Menu
:SEL EXIT:PRE SET:NEXT MENU:END
To accentuate or quiet the high frequency sound.
TREBLE
TREBLE
BASS
AUDIO RESET
TREBLE
-
:SEL
:SEL EXIT:PRE SET:NEXT MENU:END
TREBLE
BASS
AUDIO RESET
BASS
:SEL EXIT:PRE SET:NEXT MENU:END
AUDIO RESET
TREBLE
BASS
AUDIO RESET
:SEL EXIT:PRE SET:NEXT MENU:END
+
EXIT:PRE
MENU:END
To accentuate or quiet the low frequency sound.
BASS
-
+
:SEL
Press + button to increase TREBLE sound.
Press - button to decrease TREBLE sound.
EXIT:PRE
Press + button to increase BASS sound.
Press - button to decrease BASS sound.
MENU:END
Selecting Picture reset allows you to reset all OSM
settings related to AUDIO.
AUDIO RESET
NO
YES
:SEL
EXIT:PRE
MENU:END
English-25
Select “Yes” and press “SET” button to decide to
restore to factory preset.
Main-Menu
PICTURE
AUDIO
PICTURE IN PICTURE
CONFIGURATION
PICTURE IN PICTURE
Sub-Menu
:SEL EXIT:PRE SET:NEXT MENU:END
Selecting the size of picture inserted at the “Picture-in
Picture” (PIP) mode.
“Large”, “Middle”, and “Small” are available.
PIP SIZE
PIP SIZE
PIP AUDIO
PIP RESET
PIP SIZE
LARGE
MIDDLE
SMALL
:SEL EXIT:PRE SET:NEXT MENU:END
:SEL
EXIT:PRE
MENU:END
Selecting the sound source in PIP mode. When
selecting “MAIN AUDIO”, you get the sound for the
main picture and when selecting “PIP AUDIO”, you get
the sound for the picture inserted.
PIP AUDIO
PIP SIZE
PIP AUDIO
PIP RESET
PIP AUDIO
MAIN AUDIO
PIP AUDIO
:SEL EXIT:PRE SET:NEXT MENU:END
:SEL
EXIT:PRE
MENU:END
Selecting Picture reset allows you to reset all OSM
settings related to PIP.
PIP RESET
PIP SIZE
PIP AUDIO
PIP RESET
PIP RESET
NO
YES
:SEL EXIT:PRE SET:NEXT MENU:END
:SEL
EXIT:PRE
MENU:END
Select “Yes” and press “SET” button to restore to
factory preset.
Main-Menu
PICTURE
AUDIO
PICTURE IN PICTURE
CONFIGURATION
CONFIGURATION
Sub-Menu
LANGUAGE
:SEL EXIT:PRE SET:NEXT MENU:END
:SEL EXIT:PRE SET:NEXT MENU:END
OSM TIME
LANGUAGE
OSM TIME
OFF TIMER
SCREEN SAVER
CONFIGURATION RESET
:SEL EXIT:PRE SET:NEXT MENU:END
OSM control menus are available in seven languages.
LANGUAGE
ENGLISH
DEUTSCH
ESPAÑOL
FRANÇAIS
ITALIANO
SVENSKA
JAPAN
LANGUAGE
OSM TIME
OFF TIMER
SCREEN SAVER
CONFIGURATION RESET
:SEL
EXIT:PRE
MENU:END
OSM TIME
5
-
+
:SEL
EXIT:PRE
In the OSM Time menu, you can select how long the
OSM information will stay after Display key push.
A time between 3 and 30 seconds, is available.
MENU:END
To select OFF TIMER mode ON/OFF.
OFF TIMER
LANGUAGE
OSM TIME
OFF TIMER
SCREEN SAVER
CONFIGURATION RESET
:SEL EXIT:PRE SET:NEXT MENU:END
SCREEN SAVER
LANGUAGE
OSM TIME
OFF TIMER
SCREEN SAVER
CONFIGURATION RESET
:SEL EXIT:PRE SET:NEXT MENU:END
CONFIGURATION
RESET
LANGUAGE
OSM TIME
OFF TIMER
SCREEN SAVER
CONFIGURATION RESET
:SEL EXIT:PRE SET:NEXT MENU:END
OFF TIMER
ON
OFF
:SEL
24H
EXIT:PRE
MENU:END
In the OFF TIMER menu, you can select how long
monitor auto turn off time after monitor has been
turned on.
A time between 1 and 24 hours, is available.
To select SCREEN SAVER mode, select ON/OFF.
SCREEN SAVER
ON
OFF
:SEL
EXIT:PRE
MENU:END
CONFIGURATION RESET
Selecting the configuration reset allows you to reset
all configuration settings.
NO
YES
:SEL
EXIT:PRE
MENU:END
English-26
Select “Yes” and press “SET” button to restore to
factory preset.
English
OSM (On-Screen-Manager) Controls - AV Input
Main-Menu
PICTURE
AUDIO
PICTURE IN PICTURE
CONFIGURATION
PICTURE
Sub-Menu
BRIGHTNESS
:SEL EXIT:PRE SET:NEXT MENU:END
BRIGHTNESS
CONTRAST
SHARPNESS
TINT
COLOR
BLACK LEVEL
NOISE REDUCTION
PICTURE RESET
50
-
+
:SEL
:SEL EXIT:PRE SET:NEXT MENU:END
CONTRAST
BRIGHTNESS
CONTRAST
SHARPNESS
TINT
COLOR
BLACK LEVEL
NOISE REDUCTION
PICTURE RESET
SHARPNESS
EXIT:PRE
MENU:END
50
-
Press + button to increase brightness.
Press - button to decrease brightness.
Adjusts the image brightness in relation to the back
ground
CONTRAST
+
:SEL
:SEL EXIT:PRE SET:NEXT MENU:END
BRIGHTNESS
CONTRAST
SHARPNESS
TINT
COLOR
BLACK LEVEL
NOISE REDUCTION
PICTURE RESET
Adjusts the overall image and background screen
brightness.
BRIGHTNESS
EXIT:PRE
MENU:END
SHARPNESS
50
-
+
:SEL
:SEL EXIT:PRE SET:NEXT MENU:END
EXIT:PRE
MENU:END
Press + button to increase contrast.
Press - button to decrease contrast.
This function is digitally capable to keep crisp image
at any timings. It is continuously adjustable to get
distinct image or soft one as you prefer and set
independently by different timing.
Press + button to increase sharpness.
Press - button to decrease sharpness.
Adjust the tint of the screen.
TINT
TINT
BRIGHTNESS
CONTRAST
SHARPNESS
TINT
COLOR
BLACK LEVEL
NOISE REDUCTION
PICTURE RESET
Press + button to Skin colour becomes greenish.
Press - button to Skin colour becomes purplish.
:SEL
:SEL EXIT:PRE SET:NEXT MENU:END
EXIT:PRE
MENU:END
Adjust the colour depth of the screen.
COLOR
BRIGHTNESS
CONTRAST
SHARPNESS
TINT
COLOR
BLACK LEVEL
NOISE REDUCTION
PICTURE RESET
COLOR
-
:SEL
:SEL EXIT:PRE SET:NEXT MENU:END
BLACK LEVEL
BRIGHTNESS
CONTRAST
SHARPNESS
TINT
COLOR
BLACK LEVEL
NOISE REDUCTION
PICTURE RESET
:SEL EXIT:PRE SET:NEXT MENU:END
NOISE REDUCTION
BRIGHTNESS
CONTRAST
SHARPNESS
TINT
COLOR
BLACK LEVEL
NOISE REDUCTION
PICTURE RESET
:SEL EXIT:PRE SET:NEXT MENU:END
PICTURE RESET
BRIGHTNESS
CONTRAST
SHARPNESS
TINT
COLOR
BLACK LEVEL
NOISE REDUCTION
PICTURE RESET
:SEL EXIT:PRE SET:NEXT MENU:END
+
EXIT:PRE
Press + button to increase colour depth.
Press - button to decrease colour depth.
MENU:END
BLACK LEVEL
-
+
:SEL
EXIT:PRE
Press + button to increase black level.
Press - button to decrease black level.
MENU:END
NOISE REDUCTION
Activates Auto Noise reduction function.
ON
OFF
:SEL
EXIT:PRE
MENU:END
Selecting Picture reset allows you to reset all OSM
settings related to PICTURE settings.
PICTURE RESET
NO
YES
:SEL
EXIT:PRE
MENU:END
English-27
Select “Yes” and press “SET” button to restore to
factory preset.
Main-Menu
PICTURE
AUDIO
PICTURE IN PICTURE
CONFIGURATION
AUDIO
Sub-Menu
:SEL EXIT:PRE SET:NEXT MENU:END
TREBLE
BASS
AUDIO RESET
TREBLE
To accentuate or quiet the high frequency sound.
TREBLE
-
+
:SEL
:SEL EXIT:PRE SET:NEXT MENU:END
EXIT:PRE
Press + button to increase TREBLE sound.
Press - button to decrease TREBLE sound.
MENU:END
To accentuate or quiet the low frequency sound.
TREBLE
BASS
AUDIO RESET
BASS
BASS
-
:SEL EXIT:PRE SET:NEXT MENU:END
AUDIO RESET
+
:SEL
EXIT:PRE
MENU:END
Selecting Audio reset allows you to reset all OSM
settings related to AUDIO.
AUDIO RESET
TREBLE
BASS
AUDIO RESET
Press + button to increase BASS sound.
Press - button to decrease BASS sound.
NO
YES
:SEL EXIT:PRE SET:NEXT MENU:END
:SEL
EXIT:PRE
MENU:END
Select “Yes” and press “SET” button to decide to
restore to factory preset.
Main-Menu
PICTURE
AUDIO
PICTURE IN PICTURE
CONFIGURATION
PICTURE IN PICTURE
Sub-Menu
:SEL EXIT:PRE SET:NEXT MENU:END
Selecting the size of picture inserted at the “Picture-in
Picture” (PIP) mode.
“Large”, “Middle”, and “Small” are available.
PIP SIZE
PIP SIZE
PIP AUDIO
PIP RESET
PIP SIZE
LARGE
MIDDLE
SMALL
:SEL EXIT:PRE SET:NEXT MENU:END
:SEL
EXIT:PRE
MENU:END
Selecting the sound source in PIP mode. When
selecting “MAIN AUDIO”, you get the sound for the
main picture and when selecting “PIP AUDIO”, you get
the sound for the picture inserted.
PIP AUDIO
PIP SIZE
PIP AUDIO
PIP RESET
PIP AUDIO
MAIN AUDIO
PIP AUDIO
:SEL EXIT:PRE SET:NEXT MENU:END
:SEL
EXIT:PRE
MENU:END
Selecting Picture reset allows you to reset all OSM
settings related to PIP.
PIP RESET
PIP SIZE
PIP AUDIO
PIP RESET
PIP RESET
NO
YES
:SEL EXIT:PRE SET:NEXT MENU:END
:SEL
EXIT:PRE
MENU:END
Select “Yes” and press “SET” button to restore to
factory preset.
Main-Menu
PICTURE
AUDIO
PICTURE IN PICTURE
CONFIGURATION
CONFIGURATION
Sub-Menu
LANGUAGE
:SEL EXIT:PRE SET:NEXT MENU:END
:SEL EXIT:PRE SET:NEXT MENU:END
OSM TIME
LANGUAGE
OSM TIME
OFF TIMER
SCREEN SAVER
COLOR SYSTEM
CONFIGURATION RESET
:SEL EXIT:PRE SET:NEXT MENU:END
OSM control menus are available in seven languages.
LANGUAGE
ENGLISH
DEUTSCH
ESPAÑOL
FRANÇAIS
ITALIANO
SVENSKA
JAPAN
LANGUAGE
OSM TIME
OFF TIMER
SCREEN SAVER
COLOR SYSTEM
CONFIGURATION RESET
:SEL
EXIT:PRE
MENU:END
OSM TIME
5
-
+
:SEL
EXIT:PRE
MENU:END
English-28
In the OSM Time menu, you can select how long the
OSM information will stay after Display key push.
A time between 3 and 30 seconds, is available.
OFF TIMER
:SEL EXIT:PRE SET:NEXT MENU:END
SCREEN SAVER
LANGUAGE
OSM TIME
OFF TIMER
SCREEN SAVER
COLOR SYSTEM
CONFIGURATION RESET
:SEL EXIT:PRE SET:NEXT MENU:END
COLOR SYSTEM
LANGUAGE
OSM TIME
OFF TIMER
SCREEN SAVER
COLOR SYSTEM
CONFIGURATION RESET
:SEL EXIT:PRE SET:NEXT MENU:END
CONFIGURATION
RESET
LANGUAGE
OSM TIME
OFF TIMER
SCREEN SAVER
COLOR SYSTEM
CONFIGURATION RESET
:SEL EXIT:PRE SET:NEXT MENU:END
OFF TIMER
ON
OFF
:SEL
24H
EXIT:PRE
MENU:END
In the OFF TIMER menu, you can select monitor auto
turn off time after monitor has been turned on.
A time between 1 and 24 hours, is available.
To select SCREEN SAVER mode, select ON/OFF.
SCREEN SAVER
ON
OFF
:SEL
EXIT:PRE
MENU:END
Selecting the colour system depending on your input
video format. NTSC is auto.
COLOR SYSTEM
PAL
SECAM
:SEL
EXIT:PRE
MENU:END
CONFIGURATION RESET
Selecting the configuration reset allows you to reset
all configuration settings.
NO
YES
:SEL
EXIT:PRE
MENU:END
English-29
Select “Yes” and press “SET” button to restore to
factory preset.
English
To select OFF TIMER mode ON/OFF.
LANGUAGE
OSM TIME
OFF TIMER
SCREEN SAVER
COLOR SYSTEM
CONFIGURATION RESET
Controlling the LCD monitor via RS-232C Remote Control
This LCD monitor can be remote controlled by connecting a computer with RS-232C interface.
The following functions can be controlled by a computer:
•
Turn the monitor ON or OFF.
•
Changing input signals.
Connection
LCD Monitor + IBM PC or IBM PC compatible
to RS-232C terminal
PC or IBM compatible
RS-232C Cable
NOTE: If your PC is equipped only with a 25-pin serial port connector, a 25-pin serial port adapter is required.
Contact your dealer for details.
1) Interface
PROTOCOL
RS-232C
BAUD RATE
9600 [bps]
DATA LENGTH
8 [bits]
PARITY BIT
NONE
STOP BIT
1 [bits]
FLOW CONTROL
NONE
This LCD monitor uses RXD, TXD and GND lines for RS-232C control.
RS-232C cable should be null modem type.
2) Control command protocol
A command is structured as: address code, function code, data code and end code.
The length of a command is variable, depending on function.
Address code
Function code
Data code
End code
HEX
30h 30h
Function
Data
0Dh
ASCII
'0' '0'
Function
Data
[Address code]
30h 30h (ASCII code, '0' '0'), fixed.
[Function code]
A defined control code.
[Data code]
A defined value. Not available with all control commands.
[End code]
0Dh (ASCII code, '
'), fixed.
English-30
(1) The command from a computer to the LCD monitor will be sent within 400ms.
(2) The LCD monitor will send a return command 400ms* after it has received and executed a code. If the command isn’t
received correctly, the LCD monitor will not send the return command.
(3) The computer checks the command and confirms if the command which has been sent has been executed or not.
(4) The LCD monitor sends various codes other than the return code. When using the control sequence via RS-232C,
rejection of other codes from computer side is required.
*: The sending time of return command may delay depending on the condition (during changing the input signal, etc.).
Example: Turn power ON (Corresponding ASCII code in ' ' )
Sending commands
from computer
Status code from
LCD monitor
30 30 21 0D
'0' '0' '!' ' '
Meaning
Command for
POWER ON
30 30 21 0D
'0' '0' '!' ' '
Command received
(Command echoed back)
4) Operation commands
The operation commands execute the basic operation setting of the LCD monitor.
It may not operate when changing the signal:
Operation
ASCII
HEX
POWER ON
!
21h
POWER OFF
"
22h
INPUT RGB 1
_r1
5Fh 72h 31h
INPUT RGB 2
_r2
5Fh 72h 32h
INPUT RGB 3
_r3
5Fh 72h 32h
INPUT VIDEO
_v1
5Fh 76h 31h
INPUT DVD/HD
_v2
5Fh 76h 32h
•
POWER OFF command will not work for 1 minute after the power is turned on.
•
POWER ON command will not work for 1 minute after the power is turned off.
English-31
English
3) Control sequence
Features
Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight
limitations. The monitor’s small footprint and low weight allow it to be moved or transported easily from one location to another.
Colour Control Systems: Six colour presets select the desired colour setting (sRGB and NATIVE colour presets are standard
and cannot be changed). Colour temperature increases or decreases, in each preset. R,Y,G,C,B,M,S: Increases or decreases
Red, Yellow, Green, Cyan, Blue, Magenta and Saturation depending upon which is selected. The change in colour will appear
on screen and the direction (increase or decrease) will be shown by the colour bars. NATIVE: Original colour presented by the
LCD panel which is unadjustable.
sRGB Colour Control: A new optimized colour management standard which allows for colour matching on computer displays
and other peripherals. The sRGB standard, which is based on a calibrated colour space, allows for optimal colour
representation and backward compatibility with other common colour standards.
OSM (On-Screen Manager) Controls: Allow you to quickly and easily adjust all elements of your screen image via simple to
use on-screen menus.
Plug and Play: The Microsoft® solution with the Windows® 95/98/Me/2000/XP operating system facilitates setup and
installation by allowing the monitor to send its capabilities (such as screen size and resolutions supported) directly to your
computer, automatically optimizing display performance.
IPM (Intelligent Power Manager) System: Provides innovative power-saving methods that allow the monitor to shift to a
lower power consumption level when on but not in use, saving two-thirds of your monitor energy costs, reducing emissions
and lowering the air conditioning costs of the workplace.
Multiple Frequency Technology: Automatically adjusts monitor to the display card’s scanning frequency, thus displaying the
resolution required.
FullScan Capability: Allows you to use the entire screen area in most resolutions, significantly expanding image size.
VESA Standard Mounting Interface: Allows users to connect their LCD monitor to any VESA standard third party mounting
arm or bracket. Allows for the monitor to be mounted on a wall or an arm using any third party compliant device. NEC
recommends using mounting interface that comply with UL1678 standard in North America.
DVI-D: The digital-only subset of DVI ratified by the Digital Display Working Group (DDWG) for digital connections between
computers and displays. As a digital-only connector, analog support is not provided off a DVI-D connector. As a DVI-based
digital only connection, only a simple adapter is necessary for compatibility between DVI-D and other DVI-based digital
connectors such as DFP and P&D.
No Touch Auto Adjust (Analog input only): No Touch Auto Adjust automatically adjusts the monitor to optimal settings upon
initial setup.
CableComp: Automatic long cable compensation prevents image quality degradation (colour shift and dull signals) caused by
long cable lengths.
Remote PIP: Remote PIP is a different function from normal PIP that can display PIP on particular colour window on the
desktop of PC and change the size, position with the mouse.
Set your PC as follows:
(1) Open a new window (e.g. in Microsoft Excel) and create a picture box.
The size of the picture box should be set to, 256 dot x 144 line, which is 12.864 cm (W) x 7.236 cm (H)
or 512 dot x 384 line, which is 25.728 cm (W) x 19.296 cm (H)
(2) Set the window’s color to dark red (R=128,G=0,B=0).
There should not be any text, line, pattern, etc in the window.
Set Monitor (LCD4000) as follows:
(3) Select “PICTURE IN PICTURE” on OSM.
(4) Select “PIP SIZE” on OSM.
(5) Select “REMOTE PIP” on OSM.
(6) Turn on PIP button on Remote Control.
(7) Sub picture is displayed in the new window on the PC.
(8) The size and position of the Sub Picture can be changed with the mouse.
Note:
When Remote PIP is selected, contrast and black level of monitor may change. Remote PIP may not be displayed on
following cases:
•
Gamma curve on PC’s display setting is changed.
•
Contrast or Black level setting is changed from reset position on OSM.
* In these cases. Please change the setting to reset position.
English-32
No picture
• The signal cable should be completely connected to the display card/computer.
•
The display card should be completely seated in its slot.
•
Front Power Switch and computer power switch should be in the ON position.
•
Check to make sure that a supported mode has been selected on the display card or system being used.
(Please consult display card or system manual to change graphics mode.)
•
Check the monitor and your display card with respect to compatibility and recommended settings.
•
Check the signal cable connector for bent or pushed-in pins.
Power Button does not respond
• Unplug the power cord of the monitor from the AC outlet to turn off and reset the monitor.
Image persistence
• Image persistence is when a residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT
monitors, LCD monitors image persistence is not permanent, but constant images being displayed for a long period of time
should be avoided. To alleviate image persistence, turn off the monitor for as long as the previous image was displayed.
For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off
for one hour to erase the image.
NOTE: As with all personal display devices, NEC-Mitsubishi Electronics Display recommends using a moving screen saver at
regular intervals whenever the screen is idle or turning off the monitor when not in use.
Image is unstable, unfocused or swimming is apparent
• Signal cable should be completely attached to the computer.
•
Use the OSM Image Adjust controls to focus and adjust display by increasing or decreasing the fine adjustment.
When the display mode is changed, the OSM Image Adjust settings may need to be re-adjusted.
•
Check the monitor and your display card with respect to compatibility and recommended signal timings.
•
If your text is garbled, change the video mode to non-interlace and use 60Hz refresh rate.
Image of component signal is greenish
• Check to see if the DVD/HD input connector is selected.
LED on monitor is not lit (no green or red colour can be seen)
• Power Switch should be in the ON position and power cord should be connected.
•
Make certain the computer is not in a power-saving mode (touch the keyboard or mouse).
Display image is not sized properly
• Use the OSM Image Adjust controls to increase or decrease the coarse adjustment.
•
Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult
display card or system manual to change graphics mode.)
Selected resolution is not displayed properly
• Use OSM Display Mode to enter Information menu and confirm that the appropriate resolution has been selected. If not,
select corresponding option.
No Sound
• Check to see if speaker cable is properly connected.
•
Check to see if mute is activated.
•
Check to see if volume is set at minimum.
Remote Control is not available
• Check the Remote Control’s batteries status.
•
Check if batteries are inserted correctly.
•
Check if the Remote Control is pointing at the monitor’s remote sensor.
Either light vertical or horizontal stripes may appear, depending on the specific display pattern. This is no product fault or
degradation.
English-33
English
Troubleshooting
Specifications for LCD4000
Product Specifications
Analog Input
LCD Module
Pixel Pitch:
Resolution:
Colour:
Brightness:
Viewing Angle:
External speaker out put inpedance
Frequency
Digital Input
(40" / 101.6cm diagonal)
0.681mm
1280 x 768 dots (WXGA)
16,777,216
450cd/m2 (Typ.)
Up 85°/ Down 85°/ Left 85°/ Right 85° (typ) @ CR>10
Rating 7W x 7W (8Ohm)
Horizontal: 31.5kHz - 75.0kHz (15.75/15.625kHz)
Vertical: 58.0 - 62.0 Hz
58.0 - 62.0 Hz
Pixel Clock
25.0MHz - 162.0MHz
Viewable Size
871.68 x 523.008mm
Input Signal
31.5kHz - 48.4kHz
25.0MHz - 65.0MHz
PC-Input:
Signal Drive: Separated Direct Drive
TMDS
Video: Analog RGB 0.7V p-p
Input Impedance 75Ohm
Composite: TTL level (Pos./Neg.)
Composite sync on Green Video: 0.3Vp-p Neg. (video 0.7Vp-p Pos.)
Sync: Separate: TTL level (Pos./Neg.) Input Impedance 2,2KOhm
Input-terminal: BNC(R,G,B,H,V)
DVI-D (Digital)
Mini D-sub 15pin
VIDEO-Input: Composite 1.0V p-p Input Impedance 75Ohm BNC and RCA-INPUT
Y/C Y:0.7V p-p C:0.283V p-p Input Impedance 75Ohm S-TERMINAL-INPUT
Component 1.0/0.7V p-p Input Impedance 75Ohm BNC-INPUT
AUDIO-Input: Two RCA JACK L/R INPUT, STEREO Mini Jack INPUT
Control-Input: Mini D-sub 9Pin (RS-232C)
Resolutions Supported
640 x 480 at 60 Hz
800 x 600 at 60 Hz
1024 x 768 at 60 Hz
1280 x 768 at 60 Hz.................................... Recommended Resolution
1280 x 1024 at 60 Hz.................................. Analog input only
1600 x 1200 at 60 Hz.................................. Analog input only
Power Supply
2.35A @ 100-120 V, 1.05A @ 220-240V
Operational
Environment
Temperature: 5 - 40°C
Humidity: 20 - 80% (non-condensing)
Storage
Environment
Temperature: -20 - 60°C
Humidity: 10 - 90% (non-condensing): 90% - 3.5% x (Temp - 40°C) regarding over 40°C
Dimension
Net: 949 (W) x 605(H) x 141 (D) mm (without Stand),
949 (W) x 643.9 (H) x 311 (D) mm (with Stand)
Gross: 1125 (W) x 770 (H) x 261 (D) mm
Weight
Net: Approximately 27.5kg
Gross: Approximately 33.5kg
VESA compatible arm
mounting interface
2 x 200 mm x 200 mm (6 Hole)
3 x 200 mm x 200 mm (8 Hole)
Complied Regulatory and
Guidelines
UL60950/CSA C22.2 No.60950/ TUV-GS/EN60950/
FCC-B/DOC-B/EN55022-A/EN55024/EN61000-3-2/EN61000-3-3/CE
Power Management
VESA DPMS
Plug & Play
VESA, DDC CI
Accessories
User’s manual x 1, Power Cord x 1, PC - Video Signal Cable x 1, Remote Control x 1,
AA Battery x 2, Clamper x 2, Screw x 2, CD-ROM, Ferrite Core x 4, Band x 3,
Stand for the Independence x 2, Screw (M5 x 40) for stand x 4
NOTE:
Technical specifications are subject to change without notice.
English-34
English
Pin Assignment
1) Analog RGB input (MiniDsub15p): R G B 2
Pin No
Name
1
Video Signal Red
2
Video Signal Green
3
Video Signal Blue
4
GND
5
DDC-GND
6
Red-GND
7
Green-GND
8
Blue-GND
9
NC
10
SYNC-GND
11
GND
12
DDC-SDA
13
H-SYNC
14
V-SYNC
15
DDC-SCL
Mini D-SUB 15P
1
5
6
10
11
15
2) S-VIDEO input: V I D E O
Pin No
Name
1
GND
2
GND
3
Y (Luminance)
4
C (Chroma)
3) Digital RGB input (DVI-D): R G B 1
Pin - Assignment of DVI connector:
1
8
TX2-
9
TX1-
17
TX0-
2
TX2+
10
TX1+
18
TX0+
3
Shield (TX2 / TX4)
11
Shield (TX1 / TX3)
19
Shield (TX0 / TX5)
4
NC
12
NC
20
NC
5
NC
13
NC
21
NC
6
DDC-Serial Clock
14
+5V power *)
22
Shield (TXC)
7
DDC-Serial Data
15
Ground (+5V)
23
TXC+
8
NC
16
Hot plug detect
24
TXC-
1
16
9
24
17
4) RS-232 input
Pin No
Name
1
NC
2
RXD
3
TXD
4
NC
5
GND
6
NC
7
RTS
8
CTS
9
NC
Mini D-SUB 9P
1
6
English-35
5
9