Cecilware CT-500 Specifications

ELECTRIC COUNTER TOP
CONVEYOR TOASTER
OPERATION MANUAL
CT-250
CT-500
CT-750
CT-500 Shown
CECILWARE CORPORATION
th
43-05 20 AVENUE, LONG ISLAND CITY, NEW YORK 11105-1295
718-932-1414
FAX 718-932-7860
■
www.cecilware.com
NN54A 5/05
TABLE OF CONTENTS
Introduction ................................................................................. page 2
Packaging .................................................................................... page 2
Installation ................................................................................... page 3-4
Operation ..................................................................................... page 4-5
Cleaning, Care and Maintenance ............................................... page 5
Safety ........................................................................................... page 5-6
Trouble shooting ......................................................................... page 6-7
Compliance .................................................................................. page 7
Electrical Diagram ....................................................................... page 7
Explosion View ............................................................................ page 8
Spare Part List ............................................................................. page 9
Specifications .............................................................................. page 10
1
Introduction
Congratulations on the purchase of your Cecilware Conveyor Toaster. Please take time to carefully read
through this manual to ensure the machine is operated and maintained properly. This will enable the best
possible performance from this product for many years.
Cecilware will not accept liability for the following if:
*The instructions in this manual have not been followed correctly.
*Non-authorized personnel have tampered with the machine.
*Non-original spare parts are used.
*The machine has not been handled and cleaned correctly.
Packaging
Cecilware prides itself on quality and service, ensuring that at the time of packing all products is supplied
fully functioning and free of damage.
Provided in this package are the following:
*
*
*
*
*
*
*
Conveyor Toaster
Crumb Tray
Feeder Rack
Return Chute
Pass through Chute
Feet (4)
Manual
Should you find any damage that has occurred in transit, please contact your Cecilware dealer
immediately?
2
Installation
Remove the Cecilware Conveyor Toaster from the packaging. Be certain that all protective plastics and
residues are thoroughly cleaned from its surface.
Place the Cecilware Conveyor Toaster on a firm level surface.
Local standards and regulations should be consulted in order to abide by standards set in relation to
positioning, spacing, and ventilation.
Caution:
Do not position and operate near combustible materials/flammable objects. Once the Conveyor Toaster
has been placed in position, ensure the front and back stainless steel trays are positioned correctly.
Supply the appropriate power and connect to source. The Conveyor Toaster is now ready to turn on and
operate. (For power supply, please see technical specification sheet, page 10).
Your Conveyor Toaster can operate as a pass through operation or return operation. Please see diagrams
below and follow the instruction for the appropriate/required method.
Front Crumb
Tray
Close
Bac
Tra k Cru
mb
y
Back Toaster
Drawer
If open
the back
crumb
Tray
food can
If open the
back
crumb
tray
thethefood
canbebeoutout from the
If closetoaster
the backdrawer.
crumb Trat
foodthe
will back
be out crumb
from the tray
front the food
back
If the
close
crumb Tray
will be out from the front crumb tray
3
Operation
The Cecilware Conveyor Toaster has upper and lower elements which can be used together or
alternatively; the top element can be used on its own. This can provide flexibility when toasting and
grilling.
The Toaster has 3 functions which are controlled by the function dial on the left of the unit. See below for
the listed functions
Settings:
Off:
Power Off
Full Toast: Provide Full power to both Upper and Lower elements
Top Toast: Provide full power to the upper element only
Standby:
Energy Saver – reduce power to unit to save power whilst not in use, whilst keep
the unit warmer for fast heat when required.
Please see diagram below.
4
Additionally you are able to control the speed of the conveyor rotations which in turn determine the
darkness/lightness of you toasted products.

Adjusting the speed control in a clockwise direction will increase the speed in turn
resulting in lighter toasted products.

Adjusting the speed control in a anti-clockwise direction will slow the conveyor speed in
turn resulting in darker toasted products
Please see diagram above.
Important Notice: If the malfunction lights activates, the unit is malfunctioning. Turn off or
disconnect the unit from the power supply and refer to a qualified service technician.
*Caution: When in operation, the Conveyor Toaster will be hot; at the entrance to the conveyor cavity.
Please take extreme caution.
Cleaning, Care and Maintenance
Switch off the power and disconnect from the power source.
The Conveyor Toaster should be cleaned after each day’s operation; however, the unit may require more
frequent cleaning, depending on the volume of production.
Allow the Conveyor Toaster to cool before cleaning. Remove the return chutes, feeder and crumb trays
and wipe clean with a damp cloth; be sure to dry before returning them to the unit. For details cleaning
these non electrical parts can be submerged and wash thoroughly if needed.
The remainder of the Conveyor Toaster can be cleaned with a damp cloth using hot, soapy water.
Do not immerse completely in water or use hose to clean.
Warm soapy water is recommended for cleaning; prolonged use of cleaning agents may cause damage to
stainless steel.
Safety
Cecilware Qualified Service Technician should carry out repairs if necessary. Do not remove any
components or service panels on this product.
5
When cleaning, switch power off and disconnect from the outlet. If the power cord is damaged, it must be
replaced by a Cecilware Recommended Qualified Service Technician in order to avoid a hazard.
Allow the Conveyor Toaster to cool down after use before dismantling for cleaning; the unit will still be too
hot to handle immediately after use.
Trouble Shooting
If your Cecilware Conveyor Toaster does not operate, please check the following before placing a service
call.
Conveyor Toaster
CT-250, CT-500, CT-750
Problem
Cause
1.
Remedy
Mains power supply
1.
Check mains power supply.
2. Check that the unit is correctly
The unit does not work; the
2.
plugged in and turned on; ensure you
Unit is not switched on
have read the manual for both for the
indicator light is not on.
operations functions.
3.
Dial Control or Timer
3. Call
4. Plug and lead are
4. Call
damaged
or
qualified
service
agent
or
qualified
agent
or
qualified
agent
or
qualified
technician.
5. Internal wiring fault
indicator lights are not on.
agent
technician.
are faulty
The unit is heating but the
service
1. The indicator light is
5. Call
service
technician.
1. Call
faulty
service
technician.
1. Ensure that you have clearly read the
1. Incorrect operation
manual, to understand the operating
2. Warm Up
functions.
Slow heat up or no heat up,
power is on.
2. Allow 5 minutes warm up period.
3. Elements are faulty
4. Power dial is faulty
3. Call
service
agent
or
qualified
agent
or
qualified
technician.
4. Call
service
technician.
1. Turn the unit on and adjust function
Conveyor is not rotating
1. The unit is not on or
control to required setting.
the function control is not
2.
activated.
technician.
2. Speed Control Fault
3.
3. Motor Fault
technician.
4. Gear/Chain Fault
4.
Call
Call
Call
service
service
service
technician.
6
agent
or
qualified
agent
or
qualified
agent
or
qualified
Please ensure:
* There is correct power supply.
* The machine is plugged in correctly and power is switched on.
* The timer and thermostat are in the correct position.
* The elements are clear of any food waste.
Note: All Cecilware products are tested prior to packing.
Compliance
Cecilware products have undergone strict product testing in order to comply with regulatory standards
and specifications set by international, independent, and federal authorities.
As testimony to such compliance, Cecilware products carry the following marks/symbols:
Electrical Diagram
Model: CT-250, CT-500, CT-750
The above circuit diagram has been provided to assist qualified technicians. A Recommended Qualified
Service Technician should carry out repairs if needed. Do not remove any components or service panels
on this product.
7
Explosion View
Model: CT-250, CT-500, CT-750
8
Spare Parts List
Model: CT-250, CT-500, CT-750
CT-250
Part NO.
QTY
1
Return Chute
1
NA
1
NA
1
NA
2
Feet
4
08131
4
08131
4
08131
3
Fan Cover
1
08132
1
08133
1
08133
4
Base Plate
1
NA
1
NA
1
NA
5
Fan
1
08134
1
08135
1
08135
6
Motor
1
08136
1
08137
1
08137
7
Nosing
2
08138
2
08138
2
08138
8
Shaft Bracket
4
08139
4
08139
4
08139
9
Shaft Cover
4
08140
4
08140
4
08140
10
Wheel
2
08112
2
08112
2
08112
11
Chain
1
08128
1
08128
1
08128
12
Element Fixing Plate
4
08141
4
08141
4
08141
13
Conveyor Belt
1
08142
1
08143
1
08144
14
Outer Body
1
NA
1
NA
1
NA
15
Pass Through Chute
1
NA
1
NA
5
NA
16
Back Door Chute
1
NA
1
NA
1
NA
17
Plug & Lead
1
08055
1
08047
1
08047
18
Inner Top Panel
1
NA
1
NA
1
NA
19
Inner Insulation Baffle
1
NA
1
NA
1
NA
20
Top Cover
1
NA
1
NA
1
NA
21
Element Cover
1
08145
1
08146
1
08147
22
Element Assembly Plate
2
08154
2
08154
2
08154
23
Upper Element
1
08118
1
08120
1
08122
24
Lower Element
1
08119
1
08121
1
08123
25
Conveyor Drive Shaft
2
08148
2
08149
2
08150
26
Multi Function Control Switch
1
08151
1
08151
1
08151
27
Green Indicator Light
1
08152
1
08153
1
08153
28
Red Indicator Light
1
08032
1
08067
1
08067
29
Dial
2
08109
2
08109
2
08109
30
Variable Speed Controller
1
08155
1
08156
1
08156
31
Thermal Cut Out
1
08157
1
08157
1
08157
32
Feeder
1
08158
1
08159
1
08160
33
Bushing
1
08161
1
08161
1
08161
34
Conveyor Support Runner
1/L
NA
1/R
NA
35
Crumb tray
1
08106
1
08107
1
08108
*
Resistance
1
NA
1
NA
1
NA
2
NA
NA
QTY
CT-750
Part NO.
Description
9
QTY
CT-500
Part NO.
No.
2
NA
NA
Specifications
MODEL
POWER
Volt(V)
DIMENSIONS (INCHES)
(Watts)
1500
Amps(A)
LXWXH
12.5
16.5 x 11.4 x 16.1
CT-250
120
CT-500
208/240
2000/2600
9.6/10.8
16.5 x 14.5 x 16.1
CT-750
208/240
2400/3200
11.5/13.3
16.5 x 18.5 x 16.1
10
CECILWARE CORPORATION
th
43-05 20 AVENUE, LONG ISLAND CITY, NEW YORK 11105-1295
718-932-1414
FAX 718-932-7860
11
www.cecilware.com
■