Agilent Technologies 2000 X Specifications

IniniiVision 3000 X-Series
Oscilloscopes
Data Sheet
Oscilloscopes redefined:
Breakthrough technology delivers
more scope for the same budget
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Breakthrough technology for budget conscious customers
Overview of the Agilent InfiniiVision X-Series oscilloscopes
InfiniiVision
6000 X-Series
4000 X-Series
3000 X-Series
2000 X-Series
Analog channels
2 or 4
2 or 4
2 or 4
2 or 4
16 (MSO models or upgrade)
8 (MSO models or upgrade)
Digital channels
16 (MSO models or upgrade)
16 (MSO models or upgrade)
Bandwidth (upgradable)
1, 2.5, 4, 6 GHz
200, 350, 500 MHz, 1, 1.5 GHz 100, 200, 350, 500 MHz, 1 GHz 70, 100, 200 MHz
Max sampling rate
20 GSa/s
5 GSa/s
Max memory depth
4 Mpts
4 Mpts
Max waveform update rate
> 450,000 waveforms/sec
> 1,000,000 waveforms/sec > 1,000,000 waveforms/sec
Display
12.1 inches, capacitive,
12.1 inches, capacitive
multi-touch, gesture enabled
4 GSa/s (≤ 500 MHz)
5 GSa/s (1 GHz)
2 Mpts (standard)
4 Mpts (option)
8.5 inches
2 GSa/s
100 kpts (standard)
1 Mpts (option)
> 50,000 waveforms/sec
8.5 inches
InfiniiScan Zone trigger
Standard
Standard
No
No
Voice control
Standard
No
No
No
WaveGen 20-MHz funtion/
arbitrary waveform generator
Dual-channel AWG (option)
Dual-channel AWG (option)
Single-channel AWG
(option)
Single-channel funtion
(option)
Integrated digital voltmeter
Option
Option
Option
Option
Integrated hardware counter
5 digits (standard),
10 digits + totalizer (option)
5 digits (standard)
5 digits (standard)
5 digits (standard)
Search and navigate
Standard, lister supported
Standard
Standard
Standard
Segment memory
Standard
Standard
Option
Option
Mask/limit test
Option
Option
Option
Option
Serial protocol analysis options I2C/SPI, UART, CAN/LIN,
FlexRay, I2S, MIL-STD1553,
ARINC429, USB2.0
Advanced analysis options
Power analysis, USB 2.0
signal quality test, HDTV
analysis, FPGA
Color grade
Standard
I2C/SPI, UART, CAN/LIN,
FlexRay, I2S, MIL-STD1553,
ARINC429, USB 2.0
Power analysis, USB 2.0
signal quality test, HDTV
analysis, FPGA
No
I2C/SPI, UART, CAN/LIN,
FlexRay, I2S, MIL-STD1553,
ARINC429
Power analysis, HDTV
analysis
I2C/SPI, UART, CAN/LIN
No
No
Histogram
Standard
No
No
No
FFT
Standard enhanced FFT
Standard
Standard
Standard
Jitter analysis with clock
recovery
Realtime eye diagram
Option
No
No
No
No
Option
No
No
No
Advanced math
Standard, display four
funtions simultaneously
Standard, display one
funtion
Option, display one funtion
No
Connectivity
Standard USB 2.0, LAN,
Standard USB 2.0, LAN,
Standard USB 2.0 (LAN/
video (GPIB option), USB
video (GPIB option), USB
video/GPIB option), USB
mouse and keyboard support mouse and keyboard support keyboard support
Need a bigger display and state-of-the-art usability?
Consider the InfiniiVision 4000 X-series
• Industry’s first 12.1-inch capacitive touch display
• InfiniiScan Zone touch trigger capability
• 200 MHz - 1.5 GHz DSO and MSO models
• 1,000,000 wfms/sec
• Fully upgradable 5 instruments in 1
• 20 MHz dual-channel WaveGen with arbitrary waveform
See www.agilent.com/find/4000X-series for more details.
2
Standard USB 2.0 (LAN/
video/GPIB option), USB
keyboard support
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
More scope
The InfiniiVision 3000 X-Series redefined oscilloscopes. It
sees the most signal detail, does more functions than any
other oscilloscope, and gives you maximum investment
protection.
3000 X-Series – oscilloscopes redefined
Key features
• See more:
◦ One million waveforms per second update rate
The 3000 X-Series’s innovation starts with the industry’s
only 5-instruments-in-1 integration. The industry-leading
one million waveforms per second update rate is 20 times
faster than the competition to display the most signal
detail. The 3000 X-Series provides maximum investment
protection with fully-upgradable 5-instruments-in-1; even
bandwidth is upgradable. Our breakthrough technology
delivers more scope for the same budget.
◦ MegaZoom IV smart memory technology
◦ Large 8.5-inch WVGA display
◦ Optional segmented memory
• Do more:
◦ Industry’s first 5-instruments-in-1 (oscilloscope,
digital channels, built-in 20 MHz function/
arbitrary waveform generator with modulation,
integrated digital voltmeter and protocol analyzer)
• Get more:
◦ Investment protection with Industry’s only fullyupgradable oscilloscope, including bandwidth to
1 GHz
◦ Industry’s leading application solutions
InfiniiVision 3000 X-Series with MegaZoom IV smart memory technology
3
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
See more of your signal, more of the time
Largest display
The best signal visibility starts with the largest display.
The InfiniiVision 3000 X-Series comes with a large 8.5-inch
WVGA display so you can view analog, digital and serial
signals easily on the screen.
Fastest update rate
If you can’t see the problem, it is hard to troubleshoot it.
With Agilent’s MegaZoom IV smart memory technology,
the 3000 X-Series updates waveforms up to 1 million times
per second, which gives you the highest probability of capturing random and infrequent events that you would miss
on an oscilloscope with a lower waveform update rate.
Deeper memory for longer time capture
With up to 4 Mpts of MegaZoom IV deep memory, you can
capture long, non-repeating signals while maintaining a
high sample rate, then quickly zoom in on areas of interest.
Fast update rate of the 3000 X-Series displaying the rare
metastable signal
The InfiniiVision 3000 X-Series optimizes your deepmemory oscilloscope measurements by using MegaZoom
IV technology to make the most effective trade-offs in
sample rate, memory depth and waveform update rate
automatically. Although many people think deeper memory
is always better, usually deep memory means making
tradeoffs.
Oscilloscopes with deep memory require additional waveform processing time to acquire deep memory waveforms,
which means waveform update rates will be reduced significantly. For this reason, most other oscilloscopes have
manual memory-depth selections, and the typical default
memory depth setting is usually relatively shallow (10 to
100 kpts). If you want to use deep memory in these other
oscilloscopes, you must manually turn it on and deal with
the update rate tradeoff.
4M deep memory captured a long time span without losing
the details
How does Agilent do that?
The MegaZoom IV smart memory technology combines the
capabilities of an oscilloscope, digital channels, protocol
analyzer, WaveGen built-in function generator and DVM
in a compact form factor. Fourth generation MegaZoom
technology enables the industry’s fastest waveform update
rate with responsive deep memory.
4
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Do more with the power of 5 instruments in 1
Best-in-class oscilloscope
The InfiniiVision 3000 X-Series features up to 4 Mpts of
memory with Agilent’s patented MegaZoom IV technology
that is always enabled and always responsive providing the
industry’s fastest update rate at up to 1 million waveforms
per second, with no compromise if you turn on measurements, digital channels or protocol decodes.
In addition, the 3000 X-Series offers 35 (50 with N2820A
Series high-sensitivity AC/DC current probe) automated
measurements, 10 parametric triggers, serial protocol
triggers, as well as waveform math functions including FFT.
Upgradable, integrated mixed signal oscilloscope
(MSO)
The 3000 X-Series is the first instrument in its class to
offer an integrated and upgradable digital channels. Digital
content is everywhere in today’s designs and traditional 2
and 4 channel oscilloscopes do not always provide enough
channels for the job at hand.
With an additional 16 integrated digital channels, you
now have up to 20 channels of time-correlated triggering,
acquisition and viewing on the same instrument. Buy a 2
or 4 channel DSO and at anytime, and upgrade it yourself
to an MSO with a license to turn on those integrated
16 digital channels.
Industry’s first WaveGen built-in 20 MHz
function/arbitrary waveform generator
An industry first, the 3000 X-Series offers an integrated
built-in 20 MHz function/arbitrary waveform generator,
available with modulation support (DSOX3WAVEGEN). The
integrated function generator provides stimulus output of
sine, square, ramp, pulse, DC, Sinc (x), exponential rise/
fall, cardiac, Gaussian Pulse and noise waveforms to your
device under test. The modulation feature supports AM,
FM, and FSK modulations with modulation shapes of sine,
square, and ramp.
With AWG functionality, you can store the waveforms
from analog channels or reference memory to the arbitrary
memory and output from WaveGen. Easily create/edit the
waveform using built-in editor or by using Agilent’s free
Benchlink Waveform Builder Basic:
www.agilent.com/find/33503.
5
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Do more with the power of 5 instruments in 1
Integrated digital voltmeter
An industry first, the 3000 X-Series offers an integrated
3-digit voltmeter (DVM) and 5-digit frequency counter
inside the oscilloscopes (DSOXDVM). The voltmeter
operates through the same probes as the oscilloscope
channels, however, the measurements are de-coupled
from the oscilloscope triggering system so that both the
DVM and triggered oscilloscope measurements can be
made with the same connection. The voltmeter results
are always displayed, keeping these quick characterization measurements at your fingertips.
Hardware-based serial protocol decode and
triggering
• Embedded serial triggering and analysis (I2C, SPI)
• Computer serial triggering and analysis
(RS232/422/485/UART)
• Automotive and industrial serial triggering and analysis
(CAN,LIN)
• FlexRay automotive triggering and analysis
• Audio serial triggering and analysis (I2S)
• Aerospace and defense serial triggering and analysis
(MIL-STD 1553 and ARINC 429)
Agilent’s InfiniiVision Series oscilloscopes are the
industry’s first scopes to use hardware-based serial
protocol decoding. Other vendors scopes use software
post-processing techniques to decode serial packets⁄
frames. With these software techniques, waveform and
decode-update rates tend to be slow (sometimes
seconds per update). That’s especially true when using
deep memory, which is often required to capture multiple
packetized serial bus signals. Faster decoding with
hardware-based technology enhances scope usability,
and more importantly, the probability of capturing
infrequent serial communication errors.
After capturing a long record of serial bus communication
using the InfiniiVision scope’s MegaZoom IV deep
memory, you can easily perform a search operation
based on specific criteria, and then quickly navigate to
bytes/frames of serial data that satisfy that search criteria.
Sometimes it may be necessary to correlate data
from one serial bus to another. Agilent’s InfiniiVision
3000 X-Series oscilloscope can decode and list two
serial buses simultaneously using hardware-based
decoding. as well as display the captured data in a
time interleaved “Lister” display.
6
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Get more investment protection with the industry’s only fully upgradable oscilloscope
Upgradability:
Add at the time of your purchase or upgrade later:
Project needs change, but traditional oscilloscopes are
fixed – you get what you pay for at the time of purchase.
With the 3000 X-Series, your investment is protected. If
you need more bandwidth (up to 1 GHz), digital channels,
WaveGen, DVM or measurement applications in the future,
you can easily add them all after the fact.
• Bandwidth
• Digital channels (MSO)
• WaveGen built-in 20 MHz function/arbitrary
waveform generator
• Integrated digital voltmeter
• Measurement applications
◦ Serial protocol analysis
◦ Power measurement analysis
◦ HDTV video triggering and analysis
◦ Advanced math analysis
◦ Mask/limit testing
◦ Segmented memory
◦ Educators’ lab kit
See pages 27 and 28 for more detailed information on
available upgrades.
Mask/limit testing
Whether performing pass/fail tests to specified standards
in manufacturing or testing for infrequent signal anomalies
in R&D debug, the mask test option can be a valuable
productivity tool. The 3000 X-Series features hardwarebased mask testing and can perform up to 270,000 tests
per second.
Multiple test criteria can be selected including the ability
to run tests for a specific number of acquisitions, time, or
until detection of a failure. Pass/fail masks can be automatically created based on an input reference waveform
along with user-specified tolerance bands, or can be created on a PC and then imported via a USB memory stick.
Mask test evaluated more than 27 million waveforms in just
over two minutes
Limit testing made easy with the “automask” feature
7
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Get more investment protection with the industry’s only fully upgradable oscilloscope
Segmented memory
When capturing low-duty cycle pulses or data bursts, you
can use segmented memory acquisition to optimize acquisition memory. Segmented memory acquisition not only
lets you selectively capture and store important segments
of signals without capturing unimportant signal idle/
deadtime, but it also allows you to run post-capture intersegment analysis such as segment play back, waveform
measurements, and waveform overlay. Segmented memory
acquisition is ideal for applications including packetized
serial buses, pulsed laser, radar bursts and high-energy
physics experiments. Up to 1000 segments can be captured
on the 3000 X-Series models with a minimum re-arm time
under 1 μs. Segmented memory works simultaneously with
serial bus decodes as well.
Capture 1000 very infrequent glitches over 100 seconds
using segmented memory, then run inter-segment
measurement and overlay analysis on the 1000 segments.
Power Measurement and Analysis
When working with switching power supplies and power
devices, the DSOX3PWR power measurements application
provides a full suite of power measurements and analysis
that runs in the oscilloscope. Measurements include:
•
•
•
•
•
•
•
•
•
•
•
Current harmonics
Efficiency
Inrush current
Modulation
Power quality
Switching response
Transient response
Turn on/turn off
Output ripple
Power Supply Rejection Ratio (PSRR)
Slew rate
An example screen for power quality analysis
Also included at no additional charge is a license for
the U1881A PC-based power analysis software package
which provides additional offline measurements and report
generation. U1881A additional measurements include:
•
•
•
Safe operating area (SOA)/SOA mask editor
Dynamic on resistance (Rds)
On/offline analysis
8
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Get more investment protection with the industry’s only fully upgradable oscilloscope
HDTV video triggering and measurement
analysis.
Whether debugging consumer electronics with HDTV or
characterizing a design, the DSOX3VID measurement application provides support for a variety of HDTV standards
including:
• 480p/60
• 567p/50
• 720p/50
• 720p/60
• 1080i/50
• 1080i/60
• 1080p/24
• 1080p/25
• 1080p/30
• 1080p/50
• 1080p/60
• Generic (custom bi-level and tri-level sync video
standards)
Advanced math analysis
In addition to the standard waveform math functions (add,
subtract, multiply, integrate, differentiate, square root,
FFT), the optional DSOX3ADVMATH application provides
additional advanced waveform transforms, filters, and
visualization tools including:
Transforms
• Ax + B
• Square (x2)
• Absolute value (|x|)
• Common logarithm (log)
• Natural logarithm (ln)
• Exponential (eX)
• Base 10 exponential (10X)
Filters
• Low pass filter (4th order Bessel-Thompson filter
with selectable -3dB frequency)
• High pass filter (single-pole high pass filter with
selectable -3dB frequency)
Visualizations Tools
• Magnify
• Measurement trend
• Chart logic bus timing
• Chart logic bus state
9
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Other productivity tools
Infiniium Offline Oscilloscope Analysis Software
(N8900A)
Agilent’s Infiniium Offline PC-based analysis oscilloscope
software allows you to do additional signal viewing,
analysis and documentation tasks away from your scope.
Capture waveforms on your scope, save to a file, and
recall the waveforms into Infiniium Offline. The application
supports a variety of popular waveform formats from
multiple oscilloscope vendors and includes the
following features:
Navigate and view
• Navigate in time or between bookmarks
• Up to eight waveforms simultaneously
• One, two, or four grids
Measurements
• More than 50 automated measurements
• View up to 20 simultaneously
• User-customizable result window
Analyze
• 20 math operators including FFT and filters
• Up to four independent/cascaded math functions
• Measurement histogram
Documentation
• Up to 100 bookmarks
• Markers with dynamic delta value updates when moved
• One step save/load setup and all waveforms
Analysis upgrades (optional)
• Protocol decode
• Jitter analysis
• Serial data analysis
Use familiar scope controls to quickly navigate and zoom
in to any event of interest.
For more information, visit
www.agilent.com/find/N8900A
Agilent Spectrum Visualizer Software (64997A)
This PC-based software package connects to the scope
via USB or ethernet connection and uses the Agilent
I/O libraries to communicate. It provides advanced FFT
frequency domain analysis at a cost-effective price as well
as spectrum and spectrogram analysis with an intuitive
user interface that RF engineers are familiar with.
For more information visit
www.agilent.com/find/ASV_InfiniiVision
Waterfall view for ASV spectrogram measurement
10
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Other productivity tools
Reference waveforms
Store up to two waveforms in the scope’s non-volatile
reference waveform memory locations. Compare these
reference waveforms with live waveforms, and perform
post analysis and measurements on stored data. You can
also store waveforms on a removable USB memory device
in *.h5 format and recall them back into scope’s reference
waveform memory later. Save and/or transfer waveforms
to a PC as XY data pairs in a comma-separated values
format (*.csv) or store bitmap images and transfer them
to a PC for documentation purposes in a variety of image
formats including: 8-bit bitmaps (*.bmp), 24-bit bitmaps
(*.bmp), and PNG 24-bit images (*.png).
Localized GUI and help
Operate the scope in the language most familiar to you.
The graphical user interface, built-in help system, and front
panel overlays are available in 13 languages. Choose from:
English, Japanese, simplified Chinese, traditional Chinese,
Korean, German, French, Spanish, Russian, Portuguese and
Italian. During operation, access the built-in help system
just by pressing and holding any button.
Probe solutions and compatibility
Get the most out of your 3000 X-Series scope by using the
right probes and accessories for your application. Agilent
offers a complete family of innovative probes and accessories for the InfiniiVision 3000 X-Series oscilloscopes
including the innovative N2820A Series high-sensitivity
current probes for ultra-low current measurements. For
the most up-to-date and complete information about
Agilent’s probes and accessories, visit our Web site at
www.agilent.com/find/scope_probes.
Also available is the N2744A T2A (Tektronix TekProbe®
interface to Agilent AutoProbe) probe interface adapter.
This adapter allows users of Tektronix TekProbe active
probes to connect directly to the InfiniiVision 3000 X-Series
AutoProbe interface BNC input.
Autoscale
Quickly display any active signals and automatically set
the vertical, horizontal and trigger controls for optimal
viewing with the press of the autoscale button. (This
feature can be disabled or enabled for the education
environment via a USB thumb drive file with a SCPI
remote command.)
11
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Other productivity tools
Connectivity and LXI compatibility
Built-in USB host (one front, one back) and USB device
ports make PC connectivity easy. Operate the scope from
your PC and save/recall stored waveforms as well as
set-up files via LAN. The optional LAN/VGA module gives
you network connectivity and complete LXI class C support
as well as the ability to connect to an external monitor. An
optional GPIB module is also available. Only one module
may be used at a time.
34840B BenchVue lets you visualize the 3000 X-Series and
multiple measurements simultaneously. Save time with
the ability to export measurement data to Excel, Word and
MATLAB in three clicks. Monitor and control your 3000
X-Series with a mobile device from anywhere. Learn more at
www.agilent.com/find/BenchVue
Virtual front panel
The traditional VNC connection through your favorite PC
browser lets you:
• Operate the 3000 X-Series remotely
• Save/recall data and setup files
• Get screen image
• Get instrument status
In addition to the traditional VNC connection, the 3000
X-Series supports remote oscilloscope control from any
html5-enabled browser on your tablet devices. The virtual
front panel looks and acts like the real front panel on the
oscilloscope with the same associated keys and knobs.
Warranty and calibration
Through improved quality processes and rigorous testing,
the Agilent InfiniiVision X-Series oscilloscopes are now
able to perform at specification for two years without
yearly calibration thereby reducing cost of ownership
to you.
Secure erase
The secure erase feature comes standard with all 3000
X-Series models. At the press of a button, internal non-volatile memory is cleared of all setup, reference waveforms,
and user preferences, ensuring the highest level of security
in compliance with National Industrial Security Program
Operation Manual (NISPOM) chapter 8 requirements.
12
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Other productivity tools
Search and navigation
When capturing long complex waveforms using the
scope’s deep acquisition memory, manually scrolling
through stored waveform data to find specific events
of interest can be slow and cumbersome. But with the
InfiniiVision 3000 X-Series scope’s automatic search &
navigation capability, you can easily set up specific search
criteria and then quickly navigate to “found and marked”
events using the scope’s front panel forward and back
navigation keys. Available search criteria include: edges,
pulse width (time-qualified), rise/fall times (time-qualified),
runt pulses (time- and level-qualified), and serial.
The oscilloscope captured
1 ms of a digital data stream.
It was able to find, mark,
and then quickly navigate to
20 “runt” pulses using the
search and navigation feature
Advanced parametric and serial bus triggering
With today’s more complex signals, it is also often necessary to trigger on complex signal conditions in order to
synchronize the scope’s acquisition on specific events
of interest. Agilent’s InfiniiVision 3000 X-Series scopes
can trigger on the following conditions: edge, pulse width
(time-qualified), pattern, rise/rall time, Nth edge burst,
runt, setup & hold, video, USB 2.0 full/low speed, Serial1,
and Serial2.
Quickly and easily set up or upgrade a
teaching lab
Teach your students what an oscilloscope is and how
to perform basic measurements with the Educator’s
Oscilloscope Training Kit (DSOXEDK). It includes training
tools created specifically for electrical engineering and
physics undergraduate students and professors. It contains
an array of built-in training signals, a comprehensive
oscilloscope lab guide and tutorial written specifically
for the undergraduate student and an oscilloscope
fundamentals PowerPoint slide set for professors and lab
assistants. For more information, refer to:
www.agilent.com/find/EDK.
Examples of advanced triggers
30-day trial license
The 3000 X-Series comes with a one-time 30-day alloptional-features trial license. You can choose to start
the 30-day trial at any time. In addition you can redeem
individual optional feature 30-day trial licenses at any
time by visiting www.agilent.com/find/30daytrial. This
enables you to receive in effect 60 days of trial license of
each optional feature.
13
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Oscilloscope shown actual size
8.5-inch high resolution
wide screen display
reveals subtle details
that most scopes
don’t show you
WaveGen –
Industry first
built-in function
generator/AWG
Get up to sixteen integrated
digital channels
14
Built-in USB port
makes it easy to
save your work and
update your system
software quickly
Search and navigate
front panel controls
make it easy to find
and view specific
signal activity quickly
play, stop, rewind and
fast forward through
waveforms
Quickly pan and
zoom for analysis
with MegaZoom IV’s
instant response and
optimum resolution
Autoscale lets you
quickly display any
analog or digital
active signals,
automatically
setting the vertical,
horizontal and trigger
controls for the
best display, while
optimizing memory
Dedicated
keys for
quick
access
to serial,
digital
channels,
math
functions
and
reference
waveforms
Quick summary
display of
sample rate,
channel
settings and
measurements
All front
panel
knobs are
pushable
Demo and
training
signals
AutoProbe
interface
automatically
configures the
attenuation
ratio of the
probe and
provides the
probe power
for Agilent’s
active probes
Integrated
digital voltmeter
15
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Configuring your InfiniiVision X-Series oscilloscope
Step 1. Choose your bandwidth, number of channels and memory depth.
3000 X-Series specification overview
3012A
3014A
3024A
3032A
3034A
3052A
3054A
3102A
3104A
Bandwidth* (– 3 dB)
100 MHz
200 MHz
350 MHz
500 MHz
1 GHz
Calculated rise time
(10-90%)”
≤ 3.5 ns
≤ 1.75 ns
≤ 1 ns
≤ 700 ps
≤ 450 ps
Input channels
DSOX
2
4
4
2
4
2
4
2
4
MSOX
2 + 16
4 + 16
4 + 16
2 + 16
4 + 16
2 + 16
4 + 16
2 + 16
4 + 16
* For example, if you choose 500 MHz, 4+16 channels, the model number will be MSOX3054A.
Step 2. Tailor your scope with measurement applications to save time and money. After purchase upgrade
model numbers are listed below (values in parentheses are factory-installed option numbers).
Description
Model number
Oscilloscope features
Memory
DSOX3MEMUP (-040)
Segmented memory
DSOX3SGM (-SGM)
MSO upgrade
DSOX3MSO
MSO upgrade for 1 GHz models
DSOXPERFMSO
Serial protocols
Embedded serial triggering and analysis (I²C, SPI)
DSOX3EMBD (LSS)
Computer serial triggering and analysis (RS232/UART)
DSOX3COMP (-232)
Automotive serial triggering and analysis (CAN/LIN)
DSOX3AUTO (-AMS)
FlexRay serial triggering and analysis
DSOX3FLEX (-FLX)
Audio serial triggering and analysis (I²S)
DSOX3AUDIO (-SND)
MIL-STD 1553 and ARINC 429 serial triggering and analysis
DSOX3AERO (-AER)
Measurement applications
WaveGen 20 MHz arbitary/function generator
DSOX3WAVEGEN (-001)
Integrated 3-digit digital voltmeter (DVM)
DSOXDVM (-DVM)
Power analysis application
DSOX3PWR (-PWR)
Mask limit testing
DSOX3MASK (-LMT)
Enhanced video/TV application package
DSOX3VID (-VID)
Advanced math
DSOX3ADVMATH (-MAT)
Productivity tools
Education and training kit
DSOXEDK (-EDK)
Infiniium Offline oscilloscope analysis software
N8900A
Agilent spectrum visualizer
64997A
Vector signal analyzer software
89601B (version 15 and higher)
Benchlink waveform builder pro and basic
33503A
16
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Configuring your InfiniiVision X-Series oscilloscope
Step 3. Choose your probes - For complete list of compatible probes, see Agilent document 5968-8153EN and
visit www.agilent.com/find/scope_probes.
Probes
3000 X-Series
N2862B Passive probe 150 MHz 10:1 attenuation
N2863B Passive probe 300 MHz, 10:1 attenuation
N2890A Passive probe 500 MHz, 10:1 attenuation
N6450-60001 16 digital channel MSO cable
1 per channel included 100 MHz models
1 per channel included 200 MHz models
1 per channel included 350/500 MHz/1 GHz models
1 per scope included on all MSO models and
MSO upgrades
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
N2889A Passive probe 350 MHz 10:1/1:1 switchable attenuation
10076B Passive probe 250 MHz 100:1 attenuation
N2771B Passive probe 50 MHz 1000:1 attenuation
N2795A Single-ended active probe 1 GHz ±8 V with AutoProbe
N2750A InfiniiMode differential probe 1.5-GHz 700-fF 200-kΩ with AutoProbe
N2790A Differential active probe 100 MHz ±1.4 kV with AutoProbe
N2791A Differential active probe 25 MHz ±700 V
N2792A Differential active probe 200 MHz ±20 V
N2793A Differential active probe 800 MHz ±15 V
1146A AC/DC Current probe 100 kHz 100 A
1147B AC/DC Current probe 50 MHz 15 A with AutoProbe
N2893A AC/DC Current probe 100 MHz 15 A with AutoProbe
N2820A 2-channel high-sensitivity current probe 50 uA - 5 A with AutoProbe
N2821A 1-channel high-sensitivity current probe 50 uA - 5 A with AutoProbe
Step 4. Add the final touches.
Recommended accessories
3000 X-Series
LAN/VGA connection module
GPIB connection module
Rack mount kit
Soft carrying case and front panel cover
Hard transit case for 2000 and 3000 X-Series
DSOXLAN
DSOXGPIB
N6456A
N6457A
CaseCruzer 3F1112-1510J
(available from http://www.casecruzer.com/)
N6459A
N2747A
Hard copy manual
Front panel cover only
N2820A high-sensitivity high-dynamic range current probe
17
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Performance characteristics
DSO and MSO 3000 X-Series oscilloscopes
3000 X-Series specification overview
3012A
3014A
3024A
3032A
3034A
Bandwidth * (–3 dB)
100 MHz
200 MHz
350 MHz
Calculated rise time (10 - 90%)
≤ 3.5 ns
≤ 1.75 ns
≤ 1 ns
Input channels
3052A
3054A
3102A
500 MHz
3104A
1 GHz
≤ 700 ps
≤ 450 ps
DSOX
2
4
4
2
4
2
4
2
4
MSOX
2 + 16
4 + 16
4 + 16
2 + 16
4 + 16
2 + 16
4 + 16
2 + 16
4 + 16
Maximum sample rate
4 GSa/s half channel, 2 GSa/s all channel
Maximum memory depth
5 GSa/s half ch,
2.5 GSa/s all ch
Standard 2 Mpts, optional 4 Mpts and optional segment memory
Display size and type
8.5-inch WVGA display
Waveform update rate
> 1 million waveforms per second
Number of active probes
supported
In general, one for 2-channel models and two for 4-channel models.
Contact Agilent for specific configurations.
Vertical system analog channels
Hardware bandwidth limits
Approximately 20 MHz (selectable)
Input coupling
AC, DC
Input impedance
Selectable: 1 MΩ ± 1% (14 pF), 50 Ω ± 1.5%
Input sensitivity range
100 MHz ~ 500 MHz models: 1 mV/div to 5 V/div** (1 MΩ and 50 Ohm)
1 GHz models: 1 mV/div to 5 V/div** (1 MΩ), 1 mV/div to 1 V/div (50 Ohm)
Vertical resolution
8 bits (measurement resolution is 12 bits with averaging)
Maximum input voltage
300 Vrms, 400 Vpk; transient overvoltage 1.6 kVpk
With N2862A, N2863A or N2890A 10:1 probe: 300 Vrms
Frequency de-rating (assumes sine wave input): 400 Vpk until 40 kHz. Then de-rates at 20 db/dec
until 6 Vpk
DC vertical accuracy
±[DC vertical gain accuracy + DC vertical offset accuracy + 0.25% full scale] **
DC vertical gain accuracy*
± 2.0% full scale**
DC vertical offset accuracy
± 0.1 div ± 2 mV ± 1% of offset setting
Channel-to-channel isolation
> 100:1 from DC to maximum specified bandwidth of each model
(measured with same V/div and coupling on channels)
Offset range
± 2 V (1 mV/div to 200 mV/div)
± 50 V (> 200 mV/div to 5 V/div)
Vertical system digital channels
Digital input channels
16 digital (D0 to D15. pod 1: D7 ~ D0, Pod 2: D15 ~ D8)
Thresholds
Threshold per pod
Threshold selections
TTL (+1.4 V), 5V CMOS (+2.5 V), ECL (–1.3 V), user-defined (selectable by pod)
User-defined threshold range
± 8.0 V in 10 mV steps
Maximum input voltage
± 40 V peak CAT I; transient overvoltage 800 Vpk
Threshold accuracy*
± (100 mV + 3% of threshold setting)
Maximum input dynamic range
± 10 V about threshold
Minimum voltage swing
500 mVpp
Input impedance
100 kΩ ± 2% at probe tip
Input capacitance
~8 pF
* Denotes warranted specifications, all others are typical.
Vertical resolution
1 bit
Specifications are valid after a 30-minute warm-up period and ± 10 °C from firmware calibration temperature.
** 1 mV/div and 2 mV/div are a magnification of 4 mV/div setting. For vertical accuracy calculations, use full scale of 32 mV for 1 mV/div and
2 mV/div sensitivity setting.
18
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Performance characteristics
Horizontal system analog channels
3012A
Time base range
3014A
3024A 3032A 3034A 3052A
5 ns/div to
50 s/div
2 ns/div to
50 s/div
Time base accuracy*
3054A
1 ns/div to
50 s/div
3102A
3104A
500 ps/div to
50 s/div
25 ppm ± 5 ppm per year (aging)
Time base delay time range Pre-trigger
Greater of 1 screen width or 250 μs
Post-trigger
1 s to 500 s
Channel-to-channel deskew range
± 100 ns
Δ Time accuracy (using cursors)
± (time base acc. x reading) ± (0.0016 x screen width) ± 100 ps
Modes
Main, zoom, roll, XY
XY
On channels 1 and 2 only. Z Blanking on ext trigger input, 1.4 V threshold.
Bandwidth: Maximum bandwidth. Phase error at 1 MHz: < 0.5 degree.
Horizontal system digital channels
Minimum detectable pulse width
5 ns
Channel-to-channel skew
2 ns (typical); 3 ns (maximum)
Acquisition system
3012A
3014A
3024A 3032A 3034A 3052A 3054A
Maximum analog channels sample rate
4 GSa/s half channel interleaved, 2 GSa/s all channel
Maximum analog channels record length
Maximum duration of time captured at
highest sampling rate (all analog channels)
Modes
500 us with 4M memory upgrade
5 GSa/s half
channel interleaved, 2.5 GSa/s
all channel
1 GSa/s
400 us with 4M
memory upgrade
1.25 GSa/s
1 Mpts (standard - with digital channels only)
2 Mpts (optional with DSOX3MEMUP - with digital channels only)
Normal
Peak detect
3104A
2 Mpts half channel interleaved, 1 Mpts all channel (standard)
4 Mpts half channel interleaved, 2 Mpts all channel (optional with DSOX3MEMUP (-040))
Maximum digital channels sample rate
Maximum digital channels record length
3102A
Default mode
Capture glitches as narrow as 250 ps at all time base settings
Averaging
Selectable from 2, 4, 8, 16, 64, ... to 65,536
High
resolution
Real time boxcar averaging reduces random noise and effectively increases vertical resolution
12 bits of resolution when ≥ 10 μs/div at 4 GSa/s (5 GSa/s for 1 GHz models)
or ≥ 20-μs/div at 2 GSa/s (2.5 GSa/s for 1 GHz models)
Segmented
Segmented memory optimizes available memory for data streams that have long
dead times between activity. Maximum segments = 1000. Re-arm time = 1 μs (minimum
time between trigger events)
* Denotes warranted specifications, all others are typical.
Specifications are valid after a 30-minute warm-up period and ± 10 °C from firmware calibration temperature.
19
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Performance characteristics
Trigger system
Trigger sources
Analog channel (1~4), digital channel (D0~D15), line, external, WaveGen (1 or mod) (FM/FSK)
Trigger modes
• Normal (triggered): requires trigger event for scope to trigger
• Auto: triggers automatically in absence of trigger event
• Single: triggers only once on a trigger event, press [Single] again for scope to find another
trigger event, or press [Run] to trigger continuously in either Auto or Normal mode
• Force: front panel button that forces a trigger
Trigger coupling
DC: DC coupled trigger
AC: AC coupled trigger, cutoff frequency: < 10 Hz (internal); <50 Hz (external)
HF Reject: High frequency reject, cutoff frequency ~ 50 kHz
LF Reject: Low frequency reject, cutoff frequency ~ 50 kHz
Noise Reject: Selectable OFF or ON, decreases sensitivity 2x
Trigger holdoff range
40 ns to 10.00 s
Trigger sensitivity
Internal*
< 10 mV/div: greater of 1 div or 5 mV; ≥ 10 mV/div: 0.6 div
External*
200 mVpp from DC to 100 MHz
350 mVpp 100 MHz to 200 MHz
Trigger level range
Any channel
± 6 div from center screen
External
±8V
* Denotes warranted specifications, all others are typical.
Specifications are valid after a 30-minute warm-up period and ±10 °C from firmware calibration temperature.
20
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Performance characteristics
Trigger type selections
Edge
Trigger on a rising, falling, alternating or either edge of any source
Edge then edge (B trigger)
Arm on a selected edge, wait a specified time, then trigger on a specified count of another
selected edge
Pulse width
Trigger on a pulse on a selected channel, whose time duration is less than a value, greater
than a value, or inside a time range
• Minimum duration setting: 2 ns (500 MHz, 1 GHz), 4 ns (350 MHz), 6 ns (200 MHz), 10 ns
(100 MHz)
• Maximum duration setting: 10 s
• Range minimum: 10 ns
Runt
Trigger on a position runt pulse that fails to exceed a high level threshold. Trigger on a
negative runt pulse that fails to exceed a low level threshold. Trigger on either polarity runt
pulse based on two threshold settings. Runt triggering can also be time-qualified (< or >) with
a minimum time setting of 2~10 ns and maximum timesetting of 10 s.
• Minimum time setting: 2 ns (500 MHz, 1 GHz), 4 ns (350 MHz), 6 ns (200 MHz). 10 ns (100 MHz)
Setup and hold
Trigger and clock/data setup and/or hold time violation. Setup time can be set from –7 s to
10 s. Hold time can be set from 0 s to 10 ns.
Rise/fall time
Trigger on rise-time or fall-time edge speed violations (< or >) based on user-selectable threshold.
Select from (< or >) and time settings range between
• Minimum: 1 ns (500 MHz, 1 GHz), 2 ns (350 MHz), 3 ns (200 MHz), 5 ns (100 MHz)
• Maximum: 10 s
Nth edge burst
Trigger on the Nth (1 to 65535) edge of a pulse burst. Specify idle time (10 ns to 10 s) for framing.
Pattern
Trigger when a specified pattern of high, low, and don’t care levels on any combination of
analog, digital , or trigger channels is [entered | exited]. Pattern must have stabilized for a
minimum of 2 ns to qualify as a valid trigger condition.
• Minimum duration setting: 2 ns (500 MHz, 1 GHz), 4 ns (350 MHz), 6 ns (200 MHz),
10 ns (100 MHz)
• Maximum duration setting: 10 s
• Range minimum: 10 ns
Or
Trigger on any selected edge across multiple analog or digital channels
Video
Trigger on all lines or individual lines, odd/even or all fields from composite video, or
broadcast standards (NTSC, PAL, SECAM, PAM-M)
Enhanced Video (optional)
Trigger on lines and fields of enhanced and HDTV standards (480p/60, 567p/50, 720p/50,
720p/60, 1080p/24, 1080p/25, 1080p/30, 1080p/50, 1080p/60, 1080i/50, 1080i/60).
USB
Trigger on start of packet, end of packet, reset complete, enter suspend, or exit suspend.
Support USB low-speed and full-speed.
I2C (optional)
Trigger at a start/stop condition or user defined frame with address and/or data values. Also
trigger on missing acknowledge, address with no accq, restart, EEPROM read, and 10-bit write.
SPI (optional)
Trigger on SPI (Serial Peripherial Interface) data pattern during a specific framing period.
Supports positive and negative Chip Select framing as well as clock Idle framing and userspecified number of bits per frame. Supports MOSI and MISO data.
RS-232/422/485/UART (optional)
Trigger on Rx or Tx start bit, stop bit or data content or parity error.
I²S (optional)
Trigger on 2’s complement data of audio left channel or right channel (=, ≠, <, >, > <, < >,
increasing value, or decreasing value)
CAN (optional)
Trigger on CAN (controller area network) version 2.0A and 2.0B signals. Trigger on the start of
frame (SOF) bit (standard). Remote frame ID (RTR), data frame ID (~RTR), remote or data frame
ID, data frame ID and data, error frame, all errors, acknowledge error and overload frame.
LIN (optional)
Trigger on LIN (Local Interconnect Network) sync break, sync frame ID, or frame ID and data.
FlexRay (optional)
Trigger on frame ID, frame type (sync, start-up, null, normal), cycle-repetitive, cycle-base, and errors.
MIL-STD 1553 (optional)
Trigger on MIL-STD 1553 signals based on word type (Data or Command/Status), Remote
Terminal Address, data, and errors (parity, sync, Manchester encoding).
ARINC 429 (optional)
Trigger and decode on ARINC429 data. Trigger on word start/stop, label, label + bits, label
range, error conditions (parity, word, gap, word or gap, all), all bits (eye), all 0 bits, all 1 bits.
21
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Performance characteristics
Waveform measurements
Cursors**
• Single cursor accuracy:
±[DC vertical gain accuracy + DC vertical offset accuracy + 0.25% full scale]
• Dual cursor accuracy:
±[DC vertical gain accuracy + 0.5% full scale]*
• Units: Seconds(s), Hz (1/s), Phase (degrees), Ratio (%)
Automatic measurements
Measurements continuously updated with statistics. Cursors track last selected
measurement. Select up to four measurements from the list below:
• Voltage: peak-to-peak, maximum, minimum, amplitude, top, base, overshoot, pre-shoot,
average- N cycles, average- full screen, DC RMS- N cycles, DC RMS- full screen, AC RMS- N
cycles, AC RMS- full screen (standard deviation), ratio (RMS1/RMS2)
• Time: period, frequency, counter, + width, - width, burst width, duty cycle, rise time, fall time,
delay, phase, X at min Y, X at Max Y
• Count: positive pulse count, negative pulse count, rising edge count, falling edge count
• Mixed: area- N cycles, area- full screen
Counter
Built-in frequency counter:
• Source: on any analog or digital channel
• Resolution: 5 digits
• Maximum frequency: bandwidth of scope
Waveform math
Arithmetic
f (g(t))
g(t): { add, subtract, multiply between any 2 channels}
f(t): {FFT(g(t)), differentiate d/dt g(t), integrate ∫ g(t) dt, square root √g(t) }
Enabled between any combination of two channels
Arithmetic
DSOX3ADVMath advanced waveform math option adds Ax + B, Square, Absolute,
Common Log, Natural Log, Exponential, Base 10 Exponential, LP Filter, HP Filter, Magnify,
Measurement Trend, Chart Logic Bus (Timing or State).
FFT
Up to 64 kpts resolution
Set FFT Window to: Hanning, Flat Top, Rectangular, Blackman-Harris
* Denotes warranted specifications, all others are typical.
Specifications are valid after a 30-minute warm-up period and ±10 °C from firmware calibration temperature.
** 1 mV/div and 2 mV/div is a magnification of 4 mV/div setting. For vertical accuracy calculations, use full scale of 32 mV for 1 mV/div and 2 mV/div
sensitivity setting.
Display characteristics
Display
8.5-inch WVGA
Resolution
800 (H) x 480 (V) pixel format (screen area)
Graticules
8 vertical divisions by 10 horizontal divisions with intensity controls.
Format
YT, XY, and Roll
Maximum waveform update rate
> 1,000,000 wfms/s
Persistence
Off, infinite, variable persistence (100 ms - 60 s)
Intensity gradation
64 intensity levels
22
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Performance characteristics
WaveGen – Built-in function/arbitrary waveform generator (specifications are typical)
WaveGen out
Front-panel BNC connector
Waveforms
Sine, Square, Ramp, Pulse, DC, Noise, Sine Cardinal (Sinc), Exponential Rise, Exponential Fall,
Cardiac, Gaussian Pulse, and Arbitrary.
Modulation
Modulation types: AM, FM, FSK
Carrier waveforms: sine, ramp, sine cardinal, exponential rise, exponential fall, and cardiac.
Modulation source: internal (no external modulation capability)
AM:
Modulation: sine, square, ramp
Modulation frequency: 1 Hz to 20 kHz
Depth: 0% to 100%
FM:
Modulation: sine, square, ramp
Modulation frequency: 1 Hz to 20 kHz
Minimum carrier frequency: 10 Hz
Deviation: 1 Hz to carrier frequency or (2e12 / carrier frequency), whichever is smaller
FSK:
Modulation: 50% duty cycle square wave
FSK rate: 1 Hz to 20 kHz
Hop frequency: 2 x FSK rate to 10 MHz
Sine
•
•
•
•
•
•
Frequency range: 0.1 Hz to 20 MHz
Amplitude flatness: ±0.5 dB (relative to 1 kHz)
Harmonic distortion: –40 dBc
Spurious (non harmonics): –40 dBc
Total harmonic distortion: 1%
SNR (50 ohm load, 500 MHz BW) : 40 dB (Vpp > = 0.1 V); 30 dB (Vpp < 0.1V)
Square wave /pulse
•
•
•
•
•
•
•
•
•
Frequency range: 0.1 Hz to 10 MHz
Duty cycle: 20 to 80%
Duty cycle resolution: Larger of 1% or 10 ns
Pulse width: 20 ns minimum
Rise/fall time: 18 ns (10 to 90%)
Pulse width resolution: 10 ns or 5 digits, whichever is larger
Overshoot: < 2%
Asymmetry (at 50% DC): ±1% ± 5 ns
Jitter (TIE RMS): 500 ps
Ramp/triangle wave
•
•
•
•
Frequency range: 0.1 Hz to 200 kHz
Linearity: 1%
Variable symmetry: 0 to 100%
Symmetry resolution: 1%
Noise
Bandwidth: 20 MHz typical
Sine Cardinal (Sinc)
Frequency range: 0.1 Hz to 1.0 MHz
Exponential Rise/Fall
Frequency range: 0.1 Hz to 5.0 MHz
Cardiac
Frequency range: 0.1 Hz to 200.0 kHz
Gaussian Pulse
Frequency range: 0.1 Hz to 5.0 MHz
Arbitrary
•
•
•
•
•
Waveform length: 1 to 8k points
Amplitude Resolution: 10 bits (including sign bit)***
Repetition Rate: 0.1Hz to 12MHz
Sample Rate: 100 MSa/s
Filter Bandwidth: 20 MHz
23
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Performance characteristics
WaveGen – Built-in function/arbitrary waveform generator (specifications are typical) (Continued)
Frequency
• Sine wave and ramp accuracy:
◦ 130 ppm (frequency < 10 kHz)
◦ 50 ppm (frequency > 10 kHz)
• Square wave and pulse accuracy:
◦ [50+frequency/200] ppm (frequency < 25 kHz)
◦ 50 ppm (frequency ≥ 25 kHz)
• Resolution: 0.1 Hz or 4 digits, whichever is larger
Amplitude
• Range:
◦ 20 mVpp to 5 Vpp into Hi-Z**
◦ 10 mVpp to 2.5 Vpp into 50 ohms**
• Resolution: 100 μV or 3 digits, whichever is higher
• Accuracy: 2% (frequency = 1 kHz)
DC offset
• Range:
◦ ±2.5 V into Hi-Z**
◦ ±1.25 V into 50 ohms**
• Resolution: 100 μV or 3 digits, whichever is higher
• Accuracy (waveform modes): ± 1.5% of offset setting ± 1% of amplitude ± 1 mV
• Accuracy (DC mode): ± 1.5% of offset setting ± 3 mV
Trigger output
Trigger output available on Trig out BNC
Main Output
• Impedance : 50 ohms typical
• Isolation: not available, main output BNC is grounded
• Protection: overload automatically disables output
* Gaussian Pulse: 4 Vpp maximum into Hi-Z; 2 Vpp maximum into 50 ohms.
** Sinc, Cardiac and Gaussian Pulse: ±1.25 V into Hi-Z; +- 625 mV into 50 ohms
*** Full resolution is not available at output due to internal attenuator stepping.
Digital voltmeter (specifications are typical)
Functions
ACrms, DC, DCrms, Frequency
Resolution
ACV/DCV: 3 digits Frequency: 5.5 digits
Measuring rate
100 times/ second
Autoranging
Automatic adjustment of vertical amplification to maximize the dynamic range of measurements.
Range meter
Graphical display of most recent measurement, plus extrema over the previous 3 seconds.
Connectivity
Standard ports
One USB 2.0 hi-speed device port on rear panel. Supports USBTMC protocol.
Two USB 2.0 hi-speed host ports, front and rear panel
Supports memory devices, printers and keyboards
Optional ports
GPIB, LAN (10/100Base-T), WVGA video out
Trigger out
BNC connector on the rear panel. Supported modes: triggers, mask, and waveform generator
sync pulse
24
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Performance characteristics
General and environmental characteristics
Power line consumption
100 watts
Power voltage range
100-120V, 50/60/400 Hz; 100-240V, 50/60 Hz ± 10% auto ranging
Temperature
Operating: 0 to +55 °C
Nonoperating: –30 to +71 °C
Humidity
Operating: Up to 80% RH at or below +40 °C; up to 45% RH up to +50 °C
Non-operating: Up to 95% RH up to 40 °C; up to 45% RH up to 50 °C
Altitude
Operating: up to 4,000 m, Non-operating 15,300 m
Electromagnetic compatibility
Meets EMC Directive (2004/108/EC), meets or exceeds IEC 61326-1:2005/EN
61326-1:2006 Group 1 Class A requirement
CISPR 11/EN 55011
IEC 61000-4-2/EN 61000-4-2
IEC 61000-4-3/EN 61000-4-3
IEC 61000-4-4/EN 61000-4-4
IEC 61000-4-5/EN 61000-4-5
IEC 61000-4-6/EN 61000-4-6
IEC 61000-4-11/EN 61000-4-11
Canada: ICES-001:2004
Australia/New Zealand: AS/NZS
Safety
UL61010-1 2nd edition, CAN/CSA22.2 No. 61010-1-04
Vibration
Meets IEC60068-2-6 and MIL-PRF-28800; class 3 random
Shock
Meets IEC 60068-2-27 and MIL-PRF-28800; class 3 random;(operating 30g,
½ sine. 11 ms duration, 3 shocks/axis along major axis, total of 18 shocks
Dimensions
381 mm (15 in) W x 204 mm (8 in) H x 142 mm (5.6 in) D
Weight
Net: 3.9 kg (8.5 lbs), shipping: 4.1 kg (9.0 lbs)
25
Oscilloscopes redefined: Breakthrough technology delivers more scope for the same budget
Performance characteristics
Nonvolatile storage
Reference waveform display
2 internal waveforms or USB thumb drive
Waveform storage
Setup, .bmp, .png, .csv, ASCII, XY, reference
waveforms .alb, .bin, lister, mask, HDFS
Max USB flash drive size
Supports industry standard flash drives
Set ups without USB flash drive
10 internal setups
Set ups with USB flash drive
Limited by size of USB drive
Included standard with oscilloscope
Factory warranty
3-year warranty (90 days for unserialized accessories such
as passive probes)
Calibration
Certificate of calibration, 2-year calibration interval
Standard secure erase
Probes
N2862B Passive probe 150 MHz 10:1 attenuation
1 per channel included 100 MHz models
N2863B Passive probe 300 MHz, 10:1 attenuation
1 per channel included 200 MHz models
N2890A Passive probe 500 MHz, 10:1 attenuation
1 per channel included 350/500 MHz and 1 GHz models
N6450-60001 16 digital channel MSO cable
1 per scope included on all MSO models and
DSOX3MSO (for 500 MHz models and below)
DSOX3PERFMSO (for 1 GHz Models)
Interface and built-in help language support
English, Japanese, simplified Chinese, traditional Chinese, Korean, German, French, Spanish, Russian,
Portuguese, Italian, Thai, and Polish.
Localized power cord
For MET/CAL procedures, click on the Cal Labs solutions link below
http://www.callabsolutions.com/products/Agilent/
These procedures are FREE to customers
Related literature
Publication title
Publication type
Publication number
Serial Bus Applications for Agilent InfiniiVision 3000 X-Series Oscilloscopes
Data sheet
5990-6677EN
Power Measurements for Agilent InfiniiVision 3000 X-Series oscilloscope
Data sheet
5990-8869EN
Mask/Waveform Limit Testing For Agilent InfiniiVision Series
Oscilloscopes
Data sheet
5990-3269EN
26
Oscilloscopes redeined: Breakthrough technology delivers more scope for the same budget
License-only bandwidth upgrades and measurement applications
Entitlement
certificate Stick-0n
label sheet
Agilent sales
partner
Agilent software
licensing website
Customer
5
Email containing
attached licensed file
USB drive containing
license file
License Only Bandwidth Upgrade Models
Process Description
3000 X-Series
DSOX3BW24
100 MHz to 200 MHz, 4 ch, License only
DSOX3BW52
350 MHz to 500 MHz, 2 ch, License only
DSOX3BW54
350 MHz to 500 MHz, 4 ch, License only
Place order for a license only bandwidth upgrade or
measurement application product to an Agilent sales
partner. If multiple bandwidth upgrade steps are needed,
order all the corresponding upgrade products required to
get from current bandwidth to desired bandwidth. In the
case where the new bandwidth requires higher bandwidth
passive probes, they are included with the upgrade. For the
DSOX3BW24, the N2863B 10:1 300 MHz passive probes (1
per channel) will be sent with the upgrade.
Measurement Applications
DSOX3WAVEGEN
WaveGen (built -in function generator with AWG)
DSOXDVM
Integrated digital voltmeter
DSOXEDK
Educator’s kit
DSOX3MASK
Mask testing
DSOX3SGM
Segmented memory
DSOX3ADVMATH
Advanced waveform math
DSOX3VID
Enhanced video triggering
For measurement applications, you will receive a paper
or electronic .pdf Entitlement Certiicate. For bandwidth
upgrades only, you will receive a stick-on label document
indicating upgraded bandwidth speciication in addition to
a paper Entitlement Certiicate.
DSOX3EMBD
Embedded serial triggering and analysis (I C, SPI)
DSOX3COMP
Computer serial triggering and analysis
(RS232/422/485/UART)
DSOX3AUDIO
Audio serial triggering and analysis (I2S)
DSOX3AUTO
Automotive serial triggering and analysis (CAN,
LIN)
DSOX3FLEX
FlexRay serial triggering and analysis
DSOX3AERO
Aerospace serial triggering and analysis (MILSTD 1553, ARINC 429)
DSOX3PWR
Power measurements and analysis
DSOX3MSO
MSO upgrade: add 16 digital timing channels
(for 500 MHz and below models)
DSOXPERFMSO
MSO upgrade: add 16 digital timing channels
(for 1 GHz models)
Use Entitlement Certiicate containing instructions and
certiicate number needed to generate a license ile
for a particular 2000 or 3000 X-Series oscilloscope model
number and serial number unit.
2
Receive the licensed ile and installation instructions via
email.
Copy license ile (.lic extension) from email to a USB drive
and follow instructions in email to install the purchased
bandwidth upgrade or measurement application on the
oscilloscope.
For bandwidth upgrades only, attach bandwidth upgraded
stick-on label to front and rear panels of the oscilloscope.
Model number and serial number of the oscilloscope do not
change.
* See page 30 for return-to-Agilent service center upgrade process for these products
27
Oscilloscopes redeined: Breakthrough technology delivers more scope for the same budget
Return-to-Agilent Service Center Bandwidth Upgrades
Agilent Business
Center
Ship scope per
instructions
Agilent sales
partner
Agilent service
center
Customer
Return-to-Agilent Bandwidth Upgrade Models
Process Description
3000 X-Series
DSOX3BW32
100 MHz to 350 MHz, 2 ch, Service center
DSOX3BW34
200 MHz to 350 MHz, 4 ch, Service center
DSOX3BW12
500 MHz to 1 GHz, 2 ch, Service center
DSOX3BW14
500 MHz to 1 GHz, 4 ch, Service center
Upgraded scope
shipped back
Place order for a return-to-Agilent Service Center
bandwidth upgrade product to an Agilent sales partner.
Service Center installation, calibration, shipment costs are
in addition to bandwidth upgrade product price. If multiple
upgrade steps are needed, order all the corresponding
upgrade products required to get from current bandwidth to
desired bandwidth. In the case where the new bandwidth
requires higher bandwidth passive probes, they are
included with the upgrade. For the DSOX3BW32 and
DSOX3BW34, the N2890A 10:1 500 MHz passive probe (1
per channel) will be sent with the upgrade.
Agilent Business Center will contact you regarding process
and timing of the Service Center installation. Continue to
use oscilloscope until contacted again later when parts are
available at Service Center.
Ship the oscilloscope per provided instructions to Service
Center.
Service Center ships back upgraded oscilloscope with
stick-on labels applied to front and rear panels indicating
upgraded bandwidth speciication. Model number and
serial number of the oscilloscope do not change.
* See page 29 for license-only upgrade process for these products
28
Agilent Technologies Oscilloscopes
Multiple form factors from 20 MHz to > 90 GHz | Industry leading specs | Powerful applications
www.agilent.com
www.agilent.com/ind/3000X-Series
myAgilent
yAgilent
www.agilent.com/find/myagilent
A personalized view into the information most relevant to you.
For more information on Agilent
Technologies’ products, applications or
services, please contact your local Agilent
office. The complete list is available at:
www.agilent.com/find/contactus
www.axiestandard.org
AdvancedTCA® Extensions for Instrumentation and Test (AXIe)
is an open standard that extends the AdvancedTCA for general
purpose and semiconductor test. Agilent is a founding member of
the AXIe consortium.
www.pxisa.org
PCI eXtensions for Instrumentation (PXI) modular instrumentation
delivers a rugged, PC-based high-performance measurement and
automation system.
Americas
Canada
Brazil
Mexico
United States
(877) 894 4414
(11) 4197 3600
01800 5064 800
(800) 829 4444
Asia Pacific
Agilent Advantage Services
Australia
China
Hong Kong
India
Japan
Korea
Malaysia
Singapore
Taiwan
Other AP Countries
www.agilent.com/find/AdvantageServices
Europe & Middle East
Three-Year Warranty
www.agilent.com/find/ThreeYearWarranty
Beyond product specification, changing the ownership experience.
Agilent is the only test and measurement company that offers
three-year warranty on all instruments, worldwide.
Accurate measurements throughout the life of your instruments.
www.agilent.com/quality
Agilent Electronic Measurement Group
DEKRA Certified ISO 9001:2008
Quality Management System
Agilent Channel Partners
www.agilent.com/find/channelpartners
Get the best of both worlds: Agilent’s measurement expertise and
product breadth, combined with channel partner convenience.
Belgium
Denmark
Finland
France
Germany
Ireland
Israel
Italy
Netherlands
Spain
Sweden
United Kingdom
1 800 629 485
800 810 0189
800 938 693
1 800 112 929
0120 (421) 345
080 769 0800
1 800 888 848
1 800 375 8100
0800 047 866
(65) 375 8100
32 (0) 2 404 93 40
45 45 80 12 15
358 (0) 10 855 2100
0825 010 700*
*0.125 €/minute
49 (0) 7031 464 6333
1890 924 204
972-3-9288-504/544
39 02 92 60 8484
31 (0) 20 547 2111
34 (91) 631 3300
0200-88 22 55
44 (0) 118 927 6201
For other unlisted countries:
www.agilent.com/find/contactus
(BP-01-15-14)
Product specifications and descriptions in
this document subject to change without
notice.
© Agilent Technologies, Inc. 2013, 2014
Published in USA, April 11, 2014
5990-6619EN