Instructions for Installation and Use
Fan Oven
&
Cordialle
Note: Timer must be set to ‘Time of Day’ and ‘Manual’
before the oven can be used.
Note: Ensure that the oven is securely fixed to the
cabinet before use.
To the Installer
Before installation fill in the product details on the back cover of
this booklet. The information can be found on the rating plate.
To the User
You must read the instructions prior to installing and using the
appliance and then retain them for future reference.
For more information on our exciting product range ring
Creda Answer Centre 08701 546474
OR
Visit us on the NET at
http://www.creda.co.uk
Our site invites you to make use of our interactive cookbook and product selector.
Feel free to browse our product range to see what’s bubbling away at the
moment or to ask for help on our products and services
General Domestic Appliances Ltd. Morley Way Peterborough PE2 9JB
Creda Answer Centre 08701 546474
Web http://www.creda.co.uk
It may be necessary from time to time to change the specification outlined in this booklet
without notice. Any change which is made will not affect your statutory rights.
CONTENTS
Introduction
4
For Your Safety – Always
5
For Your Safety – Never
6
Features
7
Controls
8
Oven Timer Operation (Cordialle)
9
Know Your Timer
10
Electronic Clock & Automatic Oven Timer Operation 11-14
Grill Pan and Handle
15
Grilling
16
Guide To Grilling Successfully
17
Using the Oven as a Fan Oven
18-19
Using the Oven for Other Functions
20
Temperature Conversion Scale
21
Oven Temperature Charts
Cooking Results Not Satisfactory
Care & Cleaning
Installation
Something Wrong?
Service
22-23
24
25-28
29-33
34
Back Cover
3
INTRODUCTION
Your new cooker is guaranteed* and will give lasting service. This guarantee is
only applicable if the appliance has been installed in accordance with the
installation instructions detailed in this booklet.
To help make best use of your cooking equipment,
please read this booklet carefully.
The cooker is designed specifically for domestic use and responsibility will not
be accepted for use in any other installation.
Note: When the cooker is first used, an odour may be emitted - this will cease
after a short period of use
To help remove the 'new' smell, heat up the empty oven(s) to maximum for a
minimum of two to three hours keeping the oven doors closed. Ensure that the
room is well ventilated (e.g. open a window or use an extractor fan) and that
persons who may be sensitive to the odour avoid any fumes. It is suggested that
any pets be removed from the room until the smell has ceased.
This odour is due to any temporary finish on oven linings and elements and also
any moisture absorbed by the insulation.
* The guarantee is subject to the provisions that the appliance:
(a)
(b)
(c)
(d)
Has been used solely in accordance with the Users Instruction Book.
Has been properly connected to a suitable supply voltage as stated on
the rating plate attached to this equipment.
Has not been subjected to misuse or accident or been modified or
repaired by any person other than the authorised employee or agent.
Has been correctly installed.
This appliance conforms to the following EEC Directives:
Low Voltage Equipment
73/23/EEC
93/68/EEC
4
Electromagnetic Compatibility
89/336/EEC
92/31/EEC
93/68/EEC
FOR YOUR SAFETY
When used properly, your appliance is completely safe but as with any
electrical product there are certain precautions that must be observed.
PLEASE READ THE PRECAUTIONS BELOW BEFORE USING YOUR
APPLIANCE.
ALWAYS
● Always make sure you remove all packaging and literature from inside the
oven/grill compartment before switching on for the first time.
● Always make sure you understand the controls prior to using the appliance.
● Always keep children away from the appliance when in use as the surfaces
will get extremely hot during and after cooking.
● Always make sure all controls are turned off when you have finished cooking
and when not in use.
● Always stand back when opening an oven door to allow any build up of steam
or heat to disperse.
● Always use dry, good quality oven gloves when removing items from the
oven/grill.
● Always take care to avoid heat/steam burns when operating the controls.
● Always turn off the electricity supply at the wall switch before cleaning and
allow the appliance to cool.
● Always make sure the shelves are in the correct position before switching on
the oven.
● Always keep the oven/grill door closed when the appliance is not in use.
● Always keep the appliance clean as a build up of grease or fat from cooking
can cause a fire.
● Always follow the basic principles of food handling and hygiene to prevent
the possibility of bacterial growth.
● Always keep ventilation slots clear of obstructions.
● Always refer servicing to a qualified appliance service engineer.
● Always during use the oven becomes hot. Care should be taken to avoid
touching heating elements inside the oven.
SAFETY ADVICE
IN THE EVENT OF A CHIP PAN OR ANY OTHER PAN FIRE:
1. TURN OFF THE COOKER APPLIANCE AT THE WALL SWITCH.
2. COVER THE PAN WITH A FIRE BLANKET OR DAMP CLOTH, this will smother
the flames and extinguish the fire.
3. LEAVE THE PAN TO COOL FOR AT LEAST 60 MINUTES BEFORE MOVING IT.
Injuries are often caused by picking up a hot pan and rushing outside with it.
NEVER USE A FIRE EXTINGUISHER TO PUT OUT A PAN FIRE as the force of
the extinguisher is likely to tip the pan over. Never use water to extinguish
oil or fat fires.
5
FOR YOUR SAFETY
NEVER
● Never leave children unsupervised where a cooking appliance is installed as
all cooking surfaces will be hot during and after use.
● Never allow anyone to sit or stand on any part of the appliance.
● Never store items above the appliance that children may attempt to reach.
● Never remove the oven shelves whilst the oven is hot.
● Never heat up unopened food containers as pressure can build up causing the
container to burst.
● Never store chemicals, food stuffs or pressurised containers in or on the
appliance, or in cabinets immediately above or next to the appliance.
● Never operate the grill with the door closed as this may cause the appliance
to overheat.
● Never use the appliance as a room heater.
● Never use the grill to warm plates.
● Never dry any items on the oven doors.
● Never install the appliance next to curtains or other soft furnishings.
● Never allow children to play with the oven controls.
DISPOSAL OF YOUR PRODUCT
To minimise the risk of injury to children please dispose of your product carefully and
safely. Remove all doors and lids (where fitted). Remove the mains cable (where
fitted) by cutting off flush with the appliance and always ensure that no plug is left in a
condition where it could be connected to the electricity supply.
To help the environment Local Authority instructions should be followed for the
disposal of your product.
6
FEATURES
Selector
Fan oven/grill
Cordialle
Alarm
Auto
pm
Alarm
Go
●●●●●●
Select
Cordialle
Oven &
Grill
Selector
Fan Oven
Cook Stop
Period Time
Minute
Minder
Minute
Minder
Set
Selector
Oven & Grill
Temperature
control
Fan oven/grill
Oven
Indicator
Light
Electronic Timer
120 min.
Minute Minder
Minute Minder
Credaplan Fan Oven
Grill Element
Oven Light
Meat/Grill pan
Stayclean Liners
2 Oven Shelves
Oven Fan
Rating plate
Oven Door
7
CONTROL PANEL
Selector
Fan oven/grill
A
B
Minute Minder
Credaplan Fan Oven
Oven & Grill Selector
Oven & Grill Temperature Control
Fan oven/grill
Selector
A
Cook Stop
Period Time
Minute
Minder
Minute
Minder
Set
B
Minute
Minder
Alarm
Auto
pm
Alarm
On
●●●●●●
Select
Cordialle
CONTROL MARKINGS
Control
Knob
Description
A
Oven & Grill Selector
B
Oven/Grill
Temperature Control
Cooling Fan
Function
Fan
Oven
Turning Selector clockwise allows use of fan
oven.
Grill
Turning Selector anti-clockwise allows use of
grill.
70230
Oven Temperature scale (in degrees centigrade)
When cooking turn clockwise to the required
setting.
1-6
1 = Low Setting when grilling
6 = High Setting when grilling
A gentle flow of air will be blown below the control panel when the
selector switch is used.
Oven Interior The oven light is operated when the Fan Oven is selected.
Lights
Slow Cooking The oven has a “Slow Cook Setting” this can be used for slow cooking,
keeping food warm and warming plates for a short period.
To operate the minute minder, rotate the minute minder control fully
clockwise (until it can not be turned any further) and then anti-clockwise to the required minute minder setting (0-120 minutes). This will
ensure that the duration of the audible warning is as long as possible.
The minute minder will then count down to ‘0’ at which time it will emit
an audible warning for a short period. The minute minder may
continue to tick for a period after the warning has sounded.
CAUTION: The oven will continue to cook after the audible warning
has sounded, it must be turned off Manually.
To cancel the Minute Minder, turn the Minute Minder control knob anticlockwise to the ‘0’ position.
Note: It is advisable to check that all oven controls have been switched off after
you have finished using the appliance.
Minute
Minder. Fan
oven only
8
OVEN TIMER OPERATION (Cordialle)
Note: Timer must be set to ‘Time of Day’ and ‘Manual’ before the oven
can be used. (Cordialle Only)
AUTOMATIC COOKING
The Oven can be controlled by the Automatic Timer (Cordialle Only).
HINTS ON AUTOMATIC COOKING
1. Select foods which will require the same cooking time and temperature.
2. To ensure food does not cool down and require reheating, set the end time so
the food is ready when you require it.
3. Always ensure that meat and poultry is defrosted before placing in the oven.
4. Whenever possible, take food out of the refrigerator and keep it as cool as
possible.
5. If cooking food that requires frying before placing in the oven for automatic
cooking, keep the delay time to a minimum.
6. Never place hot or warm food in the oven for delay start cooking as it could
cause the oven to be warm and produce harmful bacteria in the food.
7. We advise that dishes containing left-over cooked poultry or meat, e.g.
Shepherd's Pie, should not be cooked automatically if there is to be a delay
period.
8. Ensure that delay start times are kept to a minimum to prevent bacterial
growth in food.
9. Wine or beer may ferment and cream may curdle during the delay period so
it is best to add these ingredients just before serving.
10. Foods which discolour should be protected by coating in fat or tossing in
water to which lemon juice has been added, prior to placing food in the oven.
11. Dishes containing liquid should not be filled too full to prevent boiling over.
12. Food should be well sealed (but not airtight) in a container to prevent the loss
of liquid during cooking. Aluminium foil gives a good seal.
13. Always ensure that food is piping hot and cooked thoroughly before serving.
14. Only reheat food once.
9
KNOW YOUR TIMER
CLOCKFACE
The timer incorporates a 24 hour clock.
Ensure the correct time of day is always set, before using you cooker.
PLEASE NOTE THAT THE DISPLAY WILL DIM BETWEEN 22.00
HOURS AND 06.00 HOURS TO PREVENT GLARE.
However, should you operate the timer during these hours the display
will return to normal brightness for a few seconds and then dim again.
SYMBOLS
will light up when you select a Minute Minder Period and will remain
lit for the period set. At the end of the Minute Minder Period, the timer will
emit an audible tone for 2 minutes, the
symbol will start to flash and will
continue to flash until the Minute Minder function is cancelled.
This “Cookpot” symbol will light up either:–
– When you press the Cook Period Button and set a length of time for an
Auto Cooking Programme. (It will go out again a few seconds after you
release the timer buttons).
– During the actual Cook Period.
Minute Cook End
Minder Period Time Manual
A
U
TT
O
O
Minute Cook End
Minder Period Time Manual
“AUTO” will light up:–
– When the timer is first turned on it will flash. (It will go out when a time
of day is set.)
– When an Auto Cooking Programme has been set.
The “Auto” symbol will flash at the end of an Auto Cooking programme to
indicate that the programme has finished.
(When the “Auto” symbol is flashing, to return the oven to Manual
operation, turn the oven controls off, ensure that the correct time of day
is set, and press the “Manual” button twice – The “Auto” symbol will
go out.
TIMER FUNCTION BUTTONS
Minute Minder
Button
Here you can set a time period of up to 23 hours 59 minutes, that will
count down. When it reaches zero, the timer will emit an audible tone.
For Example: If you set 20 minutes, the audible tone will occur 20
minutes later.
AUTO COOKING PROGRAMME
Cook Period is the actual length of time for which, the timer will switch
the oven(s) on as part of an “Auto Cooking” programme.
(e.g. If you set 2 hours, the food will be cooked for 2 hours).
End Time Button
The time of day at which you want an “Auto Cooking” programme to end.
For Example: If you set a “Cook Period” for 2 hours, and “End Time” of
11:00. The timer will switch the oven(s) on at 9:00 and turn the oven(s) off
at 11:00. You will hear a audible tone at 11:00, to indicate that the Auto
Cooking Programme has finished.
Notes:
– When setting an Auto Cooking programme you will need to set the
oven controls(s) to the required temperature(s) when you set the timer.
_ If an Auto Cooking programme has been set the oven(s) will only
operate during the pre-programmed time.
Manual Button
Needs to be pressed to cancel an Auto Cooking programme and return
the ovens(s) to Manual operation.
“+” and “–” Buttons Used to adjust the various timer function settings.
Cook Period Button
10
ELECTRONIC CLOCK & AUTOMATIC
OVEN TIMER OPERATION
SETTING THE TIME OF DAY
A
U
T
O
Minute Cook End
Minder Period Time Manual
Step 1 Make sure all oven controls are turned Off.
Step 2 Check the electricity supply to the cooker is turned on.
Step 3 When switched on the display will show 0.00 and Auto symbol
will be flashing intermittently.
Step 4 Press & hold in both the “Minute Minder” & “Cook Period”
button together.
Minute Cook End
Minder Period Time Manual
Step 5 With the “Minute Minder” & “Cook Period” buttons still held in,
press either the “+” or “–” buttons to set the correct time of day.
Step 6 Release all the buttons simultaneously.
THE TIME OF DAY IS NOW SET.
To change the time of day repeat Steps 4, 5 & 6 above.
Note: You cannot adjust the time of day if the timer has been set for
an Auto Cooking Programme.
Bell Symbol
SETTING THE MINUTE MINDER
Step 1 Ensure the time of day is set correctly.
Minute Cook End
Minder Period Time Manual
Step 2 Press and hold the Minute Minder Button, a
up.
symbol will light
Step 3 With the “Minute Minder” button still held in, set the required
Minute Minder time using the “+” and “–” buttons.
Release all buttons and the timer display will revert back to the time of day.
Bell symbol will remain lit to signify that a Minute Minder period has been
set.
At the end of the set time a bleeping sound will be heard, and the
symbol will flash for approximately 2 minutes.
Minute Cook End
Minder Period Time Manual
After approximately 2 minutes the bleeping sound will stop and the
symbol will go out automatically.
Step 4 To cancel the bleeping sound within the two minutes press the
Minute Minder button.
Note 1 When the Minute Minder has been set, the time remaining can be
checked at any time by simply pressing the Minute Minder button.
Note 2 If necessary the Minute Minder can be cancelled before the tone
sounds by pressing and holding the Minute Minder button and then at
the same time pressing the “–” button until 0.00 appears in the display
window.
11
ELECTRONIC CLOCK & AUTOMATIC
OVEN TIMER OPERATION
AUTO COOKING PROGRAMMES
There are two Auto Cooking programmes that can be selected using your timer:–
(a) To set the timer to switch the oven(s) On and Off Automatically
(b) To set timer to switch on immediately and OFF automatically after a set cook period.
a) TO SET THE TIMER TO SWITCH THE OVEN(S) ON AND OFF AUTOMATICALLY
This allows you to cook at a specified time for a chosen period before the oven switches
off Automatically.
Step 1 Check that the correct time of day is set, if not follow instructions for setting the
time of day.
Step 2 Place food onto the correct shelf position in the oven and close the oven door(s).
Cooktop Symbol
Step 3 Press and hold in the Cook Period button.
The display will read 0.00 with the cookpot (
) symbol lit.
Step 4 With the Cook Period button still held in, set the required Cook
Period using the “+” and “–” buttons.
Minute Cook End
Minder Period Time Manual
A
U
T
O
Release the buttons and the timer display will revert to the time of day with
the Auto symbol and Cookpot (
) symbol lit.
Step 5 Press and hold in the “End Time” button.
The display will read the earliest possible end time for the Cook
Period that you have set above.
The Auto symbol and Cookpot (
) symbol will be lit.
A
U
T
O
Minute Cook End
Minder Period Time Manual
Step 6 With the End Time button still held in, use the “+” and “–” buttons
to set the “End Time” (i.e. The time you require the oven to switch
off).
Release all the buttons and the timer will revert back to the time of day.
A
U
T
O
Minute Cook End
Minder Period Time Manual
The “Auto” symbol will remain lit to signify that an Auto Cooking
Programme has been set. The (
) symbol will go out.
Step 7 Turn the oven control(s) to the required temperature, and if
necessary select the appropriate oven function.
Note: If your appliance has two ovens: When the timer has been set for
one oven it is possible to use the other oven only during the same
Automatic programme.
At the end of the Automatic Cook Period the Auto Symbol will flash and an
intermittent bleeping sound will be heard.
The bleeping sound will continue for approximately 2 minutes unless
cancelled. The “Auto” symbol will continue to flash until the timer is
returned to Manual operation (see below).
Minute Cook End
Minder Period Time Manual
Step 8 Press the Manual button to cancel the bleeping sound. (If 2 minutes
has not elapsed).
Step 9 Turn the oven control(s) to the OFF position.
Step 10 Press the manual button again to return the oven(s) to Manual
Operation. (The Auto symbol will go out)
12
ELECTRONIC CLOCK & AUTOMATIC
OVEN TIMER OPERATION
Note 1 When cooking automatically the Cook Period can be checked at any
time by simply pressing the Cook Period button.
Note 2 When cooking automatically the End Time can be checked at any time
by simply pressing the End Time button.
b) TO SET TIMER TO SWITCH ON IMMEDIATELY AND OFF AUTOMATICALLY
AFTER A SET COOK PERIOD
Step 1
Step 2
Step 3
Check that the correct time of day is set, if not follow instructions for setting the time
of day.
Place food onto the correct shelf position in the oven and close the oven door(s).
Turn the oven control(s) to the required temperature, and if necessary select the
appropriate oven function.
Cookpot Symbol
Step 4 Press & hold in the “Cook Period” button, the display will read 0.00
and the cookpot (
) symbol will light up.
With the Cook Period button still held set the required Cook Period using
the “+” and “–” buttons. Example: 1hr 30 minutes (as shown).
Minute Cook End
Minder Period Time Manual
Note: Cook Period is the length of time the food requires to cook.
Step 5 Release all buttons.
A
U
T
O
The timer display will revert to the time of day with the Auto symbol lit &
Cookpot symbol remaining lit.
Note: Cookpot symbol disappears
A
U
T
O
A
U
T
O
At the end of the Cook Period the “Auto” symbol will flash and an
intermittent bleeping sound will be heard.
The bleeping sound will continue for approximately 2 minutes unless
cancelled. The “Auto” symbol will continue to flash until the timer is
returned to Manual operation (see below).
Step 6 Press the manual button to cancel the bleeping.
(If 2 minutes has not elapsed)
Minute Cook End
Minder Period Time Manual
Step 7 Turn the oven control(s) to the OFF position.
A
U
T
O
Step 8 Press the “Manual” button again to return the cooker to Manual
operation. (The Auto symbol will go out).
Minute Cook End
Minder Period Time Manual
13
ELECTRONIC CLOCK & AUTOMATIC
OVEN TIMER OPERATION
TO CANCEL AN AUTO COOKING PROGRAMME BEFORE
THE COOK PERIOD HAS FINISHED.
Step 1 Turn the oven control(s) to the OFF position.
Step 2 Press and hold in the “Cook Period” button.
Minute Cook End
Minder Period Time Manual
Step 3 With the “Cook Period” button still held in, return the display to
0.00 by pressing the “–” button.
A
U
T
O
Minute Cook End
Minder Period Time Manual
Note 1
Step 4 Release the “Cook Period” and “–” buttons and the display will
revert to the time of day and the “Auto” symbol will flash.
Step 5 Press the “Manual” button to return the oven(s) to “Manual”
operation. The “Auto” symbol will go out.
When cooking automatically the Cook Period can be checked at any time by
simply pressing the Cook Period button.
OTHER NOTES ON TIMER OPERATION
1. When cooking Automatically the Cook Period can be checked at any time simply by
pressing the Cook Period button.
2. When cooking Automatically the End Time can be checked at any time by simply pressing
the End Time button.
3. Having set a Cook Period and End Time an electronic device stores the information. The
device within the timer will switch the oven(s) on and off at the required times.
4. When setting an Auto Cooking Programme and a mistake is made, to clear:–
(a) Press and hold in the “Cook Period” button.
(b) With the Cook Period button still held in, return the display to
“–” button.
A
U
T
O
by pressing the
(c) Release the “Cook Period” & “–” buttons, and the display will revert to the time of day
and the “Auto” symbol will flash.
(d) Press & release the “Manual” button.
(e) Start the sequence again.
5. If at any time the display shows three flashing zero’s 0.00. It is likely that the electricity
supply to the oven has been interrupted. Reset the timer to the correct time of day.
Food in the oven may, therefore, not have been cooked, before serving check food is
thoroughly heated and completely cooked.
6. To set each function always press and hold the required function button and at the
same time press “+” or “–” buttons.
Note: Between the hours of 22.00 & 06.00 the display dims to prevent glare.
However, if you should operate a button during this period, the timer will return to
normal brightness for a few seconds and then dim again.
14
GRILL
PAN & HANDLE
The grill pan handle is detachable from the pan, to facilitate cleaning and storage.
The grill pan handle can be fixed as follows:
(d)
(a)
(c)
(b)
Step 1
Step 2
Step 1
Step 2
Step 3
Step 4
Step 3
Step 4
Remove screw & washers from the grill pan bracket (a).
Tilt the handle over the recess (b).
Slide it towards the centre of the pan (c).
Locate the handle over the bracket (d).
For a fixed handle, replace screw & washers and ensure they are fully
tightened up. If a detachable handle is required, do not replace screw &
washers.
Note: If a fixed handle is required, the grill pan is unable to be stored in the oven
with the door closed and cannot be used as a meat pan.
GRILL PAN AND FOOD GRID
GRILL PAN
FOOD GRID
DOOR POSITION FOR GRILLING
Note:Do not grill with the grill/oven door
closed.
15
GRILLING PROCEDURE
Selector
A
Fan oven/grill
Minute Minder
B
Credaplan Fan Oven
Oven & Grill Selector
Selector
A
Oven & Grill Temperature Control
Fan oven/grill
B
Cordialle
Cook Stop
Period Time
Minute
Minder
Minute
Minder
Set
Alarm
Auto
Alarm
On
pm
●●●●●●
Select
Note: DO NOT allow young children near to the appliance when the grill is in use
as the surfaces get extremely hot.
Step 1 Ensure oven timer is set to manual.
Ensure the oven shelf is in the correct position (see Guide to Grilling
Successfully).
Ensure door is in the grilling position (see grilling page)
Step 2 Turn knob (A) anti-clockwise to grill function
Step 3 Turn knob (B) clockwise to select the Grill Setting (1–6). (1=Low, 6=High).
NOTE: When using the grill, a gentle flow if air will be detected coming from
beneath the control panel.
Step 4 After use, turn both controls A & B to their off (0) position.
Notes: • Ensure oven timer is set to manual (Cordialle Only).
• Preheat the grill at setting 6 on the grill control for approximately 5 minutes.
• The grill pan must be placed on the correct shelf and positioned centrally under
the grill element.
• Leave the control at 6 for toast, and for fast cooking of foods.
• For thicker foods requiring longer cooking, turn the switch to a lower setting
after the initial sealing on both sides at 6. The thicker the food, the lower the
control should be set.
• If excessive smoke is emitted reduce the setting.
• Do not line the grill pan with aluminium foil as this increases the amount of fat
spitting.
• Ensure that the Grill Pan is cleaned after use. Excessive fat build-up in the
bottom of the pan could cause a fire hazard.
• After use, always return both controls to their OFF (O) position.
16
GUIDE TO GRILLING SUCCESSFULLY
Preheat
for
5 mins.
Shelf Position
from Base
of Oven
Toasting of
Bread Products
No. 6
6 or 5
Time depending on
type of food.
Small cuts of meat,
sausages, bacon, etc.
No. 3
6 or 5
10-20 mins.
Chops, gammon steaks
etc.
No. 4
6 or 5
20-30 mins. depending
on thickness.
Fish whole Fillets,
e.g. Fish Fingers
No. 4
5
10-20 mins.
Pre-cooked potato
products
No. 5
5
10-20 mins.
No. 4 or 3
5
Preheat pan first, time
depending on size and
type.
No. 6
6
5-10 mins.
Food
Pizzas
Browning of food
Approx.
Cooking
Time
The temperatures below relate to heat setting recommended on food packs.
High
Medium High
Medium
Medium Low
Low
Very Gentle
=
=
=
=
=
=
No. 6
No. 5
No. 4
No. 3
No. 2
No. 1
17
USING THE OVEN FOR FAN COOKING
Fan
Oven
Since a circulaire fan oven heats up more quickly, and generally cooks food at a
lower temperature than a conventional oven, pre-heating is often unnecessary.
For guides on “pre-heating”, “cooking temperatures” and “cooking times”, see
“Oven Temperature Charts” later in book.
NOTE: Charts are a guide only, to suit personal taste and requirements, it may be
necessary to increase or decrease temperatures by 10˚C. It may also be necessary
to increase or decrease cooking times.
OVEN SHELF POSITIONING FOR FAN OVEN
Most foods will cook satisfactorily on any shelf position, due to even distribution
of heat in the oven, but the shelves must be evenly spaced.
Food or utensils should never be placed directly on the floor of the oven for
cooking as air circulation is restricted.
DO NOT allow young children near to the appliance when the oven is in use as the
surfaces get extremely hot.
OVEN UTENSILS
Do not use:
Meat pans larger than 375mm x 300mm (15” x 12”)
Baking Trays larger than 325mm x 250mm (13” x10”)
An additional oven shelf can be purchased from your oven supplier if a third one
is required for batch baking. Never use more than three shelves in the oven as
air circulation will be seriously restricted.
TEMPERATURE & TIME
If three shelves are in use to cook large quantities of food, it may be necessary
to increase the cooking times given in the temperature charts by a few minutes,
to allow for the loss of heat due to extra time taken to load the oven, and the
larger mass of food. Baking trays should have an even gap around the oven.
18
USING THE OVEN FOR FAN COOKING
Fan
Oven
FAN OVEN OPERATION
Selector
A
Fan oven/grill
Minute Minder
B
Credaplan Fan Oven
Oven & Grill Selector
Selector
A
Cordialle
Oven & Grill Temperature Control
Fan oven/grill
B
Cook Stop
Period Time
Minute
Minder
Minute
Minder
Set
Alarm
Auto
pm
Alarm
On
●●●●●●
Select
Step 1 Ensure oven timer is set to manual (Cordialle only).
Ensure that the oven shelf is in the correct position.
Place food centrally on the shelf ensuring the oven door is fully closed.
Turn knob A clockwise to Fan Oven function.
Step 2 Turn knob (B) clockwise and select the required cooking temperature
(70˚C to 230˚C). The pilot light (●) will immediately come on, and remain
on until the oven reaches the required temperature. The light will then
automatically go off and on during cooking as the oven thermostat
maintains the correct temperature.
Step 3 After use turn both controls to their Off (O) position.
NOTE: At the end of a cooking period there may be a momentary puff of steam
when the door is opened. This will disperse in a few seconds and is a
perfectly normal characteristic of an oven with a good door seal.
19
USING THE OVEN FOR OTHER FUNCTIONS
90
“SLOW” SETTING
This is used for slow cooking, keeping food warm and warming plates for short
periods. Extra care should be taken when warming bone china, as it may be
damaged in a hot oven.
DO NOT place food or plates directly on the oven floor as this could damage both
the oven lining and the plates which are being warmed.
ADVANTAGES OF SLOW COOKING ARE:
The oven stays cleaner because there is less splashing.
Timing of food is not as critical, so there is less fear of overcooking.
Inexpensive joints of meat are tenderised.
Fully loading the oven can be economical.
Cooking times can be extended in some cases by up to 2 hours.
The kitchen stays cooler.
OPERATION:
1.
2.
Place the prepared food in the main oven and ensure the door is fully closed.
Turn knob A to Fan Oven function.
Turn knob B to E 90 (slow cooking temperature).
STORAGE & RE-HEATING OF FOOD:
1.
2.
3.
4.
If food is to be frozen or not used immediately, place it in a clean container
and cool as soon as possible.
Always thaw frozen food completely in the refrigerator before re-heating.
Always reheat food thoroughly and ensure it is piping hot before serving.
Only re-heat food once.
POINTS TO CONSIDER WHEN PREPARING FOOD FOR SLOW COOKING
1. Make sure that the dishes to be used will fit into the oven ensuring enough room
for air to circulate.
2. All dishes cooked on the slow setting will require a minimum of 6 hours, however,
it they are cooked for 1-2 hours longer then deterioration in their appearance may
be noticed.
3. Never cook joints of meat over 2.7kg (6 lb) or poultry over 2.0kg (4lb 8oz).
We do not recommend that joints of meat or poultry are stuffed before cooking on
the slow setting.
4. To seal in the meat juices, always cook meat or poultry at 170oC for 30 minutes
before wrapping in foil and placing on a rack over a tin (to allow good air
circulation) before turning the control to the slow setting and cooking immediately.
5. Always ensure that joints of pork and poultry are thoroughly cooked by checking
with a meat thermometer before serving.
6. Always thaw frozen foods completely before cooking. We do not recommend
placing frozen food in the oven to cook.
7. Always bring soups, liquids and casseroles to the boil before placing in the oven.
8. Ensure that casserole dishes have a good seal (not airtight) and cover to the
top with foil to prevent loss of moisture.
9. Ensure that fruit and vegetables are cut into even sized small pieces to cook
properly.
10. Always adjust seasoning before serving.
11. If using dried red kidney beans it is important that the beans are soaked and then
boiled for a minimum of 10 minutes before using in any dish to destroy any toxins.
12. When cooking fish or egg dishes it may be necessary to check during cooking to
avoid overcooking.
20
TEMPERATURE CONVERSION SCALE
F
Main
Conventional
Oven
Main
Fan
Oven
/2
250
120
100
1
275
140
120
2
300
150
130
3
325
160
140
4
350
180
160
5
375
190
170
6
400
200
180
7
425
220
200
8
450
–
210
9
475
–
220
Gas
Mark
1
o
21
OVEN TEMPERATURE CHARTS – MEAT
Fan Oven Cooking
Food
Note: Up to three shelves may be used in this oven. The position
of these is not important providing they are evenly spaced.
Pre- Temperature
o
heat
C
Meat
Time
(approx.)
Beef
No
160/180
20-25 mins per 450g (1lb)
+ 20 mins extra
Lamb
No
160/180
25 mins per 450g (1lb)
+ 25 mins extra
Pork
No
160/180
25 mins per 450g (1lb)
+ 25 mins extra
Veal
No
160/170
25-30 mins per 450g (1lb)
+ 25 mins extra
Chicken/Turkey
up to 4kg (8lb)
No
160/180
18-20 mins per 450g (1lb)
+ 20 mins extra
Turkey up to
5.5kg (12lb)
No
150/160
13-15 mins per 450g (1lb) e.g.
5kg (11lb) = 143-165 mins
Turkey over
5.5kg (12lb)
No
150
12 mins per 450g (1lb) e.g.
10kg (22lb) = 264 mins
Casserole /
Stews
No
140/150
11⁄2 - 2 hours
IF USING ALUMINIUM FOIL
1. Never allow foil to touch sides of oven. 2. Never cover interior with foil.
3. Never cover shelves with foil.
The most accurate method of testing the readiness of joints of meat or whole
poultry is to insert a meat thermometer into the thickest part of a joint of meat, or
the thickest part of poultry thighs, during the cooking period. The meat
thermometer will indicate when the required internal temperature has been
reached.
Beef
Rare 60OC
22
Medium 70OC Well Done 75OC
Pork
Lamb
Poultry
Veal
90OC
80OC
90OC
75OC
OVEN TEMPERATURE CHARTS – BAKING
Fan Oven Cooking
Baking
Note: Up to three shelves may be used in this oven. The position
of these is not important providing they are evenly spaced.
Food
Pre- Temperature
o
heat
C
Scones
Yes
210/220
9-12 mins
Small Cakes
No
170/180
15-25 mins
Time
Victoria
Sandwich
Sponge Sandwich
(Fatless)
No
160/170
20-25 mins
Yes
170/190
15-20 mins
Swiss Roll
Yes
180/200
12-15 mins
Semi-rich
Fruit Cake
No
140/150
11⁄4-11⁄2 hours
Rich Fruit Cakes
No
130/140
Time depending on use
Shortcrust
Pastry
No
190/200
Time depending on use
Puff Pastry
No
190/200
Time depending on use
Yes
180/190
40-45 mins
Yes
190/200
20-45 mins
Milk Pudding
No
130/140
11⁄2-2 hours
Baked Custard
No
140/150
35-45 mins
Bread
Yes
200/210
20-30 mins
Meringues
No
70/90
3-4 hours
Yorkshire
Pudding
Individual
Yorkshire Pudding
Note: If soft tub margarine is being used for cake making, we would recommend using the
all in one method and to reduce the temperature by 10˚C. Temperatures recommended in
this chart refer to cakes made with block margarine or butter only.
23
COOKING RESULTS NOT SATISFACTORY
GRILL
Uneven cooking front to back
Ensure that the grill pan is positioned centrally
below the grill element.
Fat splattering
Ensure that the grill pan is not lined with foil.
Ensure that the grill setting is not too high.
BAKING GENERAL
Uneven rising of cakes
Ensure that the oven shelves are level.
Sinking of cakes
The following may cause cakes to sink:
1. Pre-heating of fan ovens – not always necessary.
2. Cooking at too high a temperature – reduce
standard temperatures by 25˚C for fan ovens.
3. Using normal creaming method with a soft
margarine. If using soft margarine, use an all in
one method instead of the traditional creaming of
the margarine and sugar. Remember when using
a food mixer or processor not to over-cream soft
margarine.
Over/undercooking
Refer to the cooking times and temperatures given in
the Oven Temperature Charts provided, however, it
may be necessary to increase or decrease
temperatures by 10˚C to suit personal taste.
Do not use utensils greater than 56mm (2l⁄4'') in
height for roasting.
24
CARE AND CLEANING
Warning: Before cleaning, please ensure that the electricity supply to the appliance is
switched off and the appliance is fully cold.
1. “CREDACLEAN” OVEN LINERS
(a) How "Credaclean" works.
The surfaces of the "Credaclean" oven liners are
treated with a special vitreous enamel which absorbs
cooking soils. At temperatures of 220°C (425°F) or
above, the special surface enables these soils to be
slowly destroyed.
The higher the temperature the more effective it is.
(b) Cleaning.
MAIN OVEN SIDE LINERS
AND REAR PANEL
In most cases normal cooking operations at 220°C
(425°F) will permit this cleaning operation to
proceed during cooking. However if higher cooking
temperatures are not used regularly, it may be
necessary, in order to prevent heavy soiling, to run
the ovens without shelves or meat pan, at a
maximum setting for a couple of hours.
It should not normally be necessary to clean the
"Credaclean" panels with water. If the user feels it is
desirable to do so, wipe them over with a clean,
soapy cloth, followed by a wipe with a clean damp
cloth.
DO NOT use biological washing powder, harsh
abrasives or chemical oven cleaners of any kind as
this could damage the “Credaclean” oven liners.
25
CARE AND CLEANING
2. CLEANING THE OVEN
(a) Base of Main Oven.
REMOVABLE GRILL ROOF
PANEL (NOT ALL MODELS OR
MODELS FITTED WITH HIGH
SPEED GRILL)
Wipe out the oven with a damp soapy cloth. For
more stubborn stains on the base of the oven use a
well soaped fine steel wool soap pad.
(b) Grill/Meat Pan & Oven Shelves.
OVEN
pan,
SHELVES
MAIN
OVEN
BASE
GRILL/
MEAT
PAN
To prevent stains from being burnt on to the grill
food support and rod shelf, always wash
immediately after use in hot soapy water.
Use a well soaped fine steel wool soap pad to
remove stubborn stains from the rod shelves,
grill/meat pan and the base of the oven.
DO NOT use aerosol cleaners on this oven as they
could adversely affect the fan motor unit, and cannot
be wiped off the fan blade.
(c) Removable Grill Roof Panel (not all models).
Pull grill roof panel out slowly, being careful not to
damage the elements. Clean using a damp soapy
cloth, if stubborn stains remain gently clean with a
well soaped fine steel wool soap pad and soapy
water, and then wipe over with a damp cloth.
(d) Solarplus Grill (not all models).
To clean the Solarplus grill, use a clean, damp,
soapy cloth and wipe over. If stubborn stains
remain, gently clean with a well soaped nylon
scouring pad and wipe over with a damp cloth.
DO NOT use metal cleaning utensils, wire wool or
proprietary oven cleaners on the grill element mesh.
26
CARE AND CLEANING
3. CONTROL PANEL / TRIMS / INNER DOOR PANEL & GLASS
(a) Control Panel
Regularly wipe with a clean, damp cloth and polish
with a clean, dry cloth.
(b) Trims
OVEN
DOOR
It is advisable to clean the trims regularly to prevent
any build up of soiling which may detract from the
appearance of the cooker. The recommended
method of cleaning is to wipe over the trims with a
clean, soft cloth wrung out in hot water, or mild non
abrasive cleaner. (If in doubt try the cleaner on a
small area of trim which is not notice able in normal
use), then after wiping with a cloth wrung out in
clear water, dry with a clean, soft cloth.
(c) Inner Door Panels & Glass
TRIMS
Open the door fully. The glass panel may now be
washed. Stubborn stains can be removed by using a
well soaped, fine steel wool soap pad.
DO NOT use scouring pads, or abrasive powder,
which will scratch the glass.
4. REPLACEMENT OF THE OVEN LAMP
Warning: Before removing lamp lens, please ensure
that the electricity supply to the appliance is
switched off and the appliance is fully cold.
MAIN OVEN LAMP
Open the oven door and remove the oven shelves.
Using a thick cloth, grip the lamp lens, unscrew anticlockwise and remove the lens.
Carefully unscrew the bulb anti-clockwise. Fit
replacement bulb (15W 300°C SES). Fit replacement
bulb and refit lens.
5. HOW TO CLEAN THE LAMP LENS
Warning: Before cleaning lamp lens, please ensure
that the electricity supply to the appliance is
switched off and the appliance is fully cold.
Open the oven door and remove the oven shelves.
Using a thick cloth, grip the lamp lens, unscrew anticlockwise and remove.
Clean with a non-abrasive cleansing cream and refit
lamp lens.
DO NOT use scouring pads, or abrasive powder,
which will scratch the glass lens
MAIN OVEN LAMP
27
CARE AND CLEANING
Take particular care not to damage the inner surface of the door inner
glass that is coated with a heat reflective layer. Do not use scouring
pads, or abrasive powder, which will scratch the glass. Ensure that the
glass panel is not subjected to any sharp mechanical blows.
Stubborn stains can be removed by using a fine steel wool pad. For slight soiling the inner glass panel may be cleaned, while still warm, without removing it
from the door. After cleaning, rinse and dry with a soft cloth.
CLEANING THE DOORS
SIDE OPENING DOORS
Cleaning the door glass is the same as the drop down doors, except take
care to support the weight of the inner glass when removing and refitting.
DROP DOWN DOORS
Remove the door inner glass as follows.
1. Open the door fully and unscrew the two screws securing the glass panel so
that the securing brackets can be turned. There is no need to remove the
screws completely.
2. Turn the brackets so that the glass can be
removed and cleaned at the sink (Fig. 1.)
Fig. 1.
Glass
3. The inside of the outer door glass can now be cleaned while still fitted to
the cooker.
NEVER OPERATE THE COOKER WITHOUT THE INNER
DOOR GLASS IN POSITION.
Refit the door inner glass as follows.
1. NOTE: The inner door glass has a special reflective coating on one side.
Replace the door inner glass so that the statement: “IMPORTANT THIS
FACE TOWARDS THE OVEN” can be read from the inner side of the door.
2. Turn the two securing brackets back to their
original position to retain the glass and tighten
the screws. (Fig. 2.)
Fig. 2.
Glass
28
INSTALLATION INSTRUCTIONS
IMPORTANT
This equipment is designed specifically for domestic purposes and Creda Limited
cannot accept responsibility if used in any other type of installation.
All Creda oven units are suitable for installation under Creda hob units.
This appliance must not be installed over any appliance that generates heat.
For your own safety, we recommend that your appliance is installed by a competent
person – such as one who is registered with NICEIC (National Inspection Council
for Electrical Installation Contracting). The cooker should be installed in
accordance with the latest Edition of the IEE Regulations.
1. GENERAL
WARNING: THIS APPLIANCE MUST BE EARTHED.
(a) The oven unit is designed for mounting at a safe level into an oven housing
which must be secured to the backing wall, or alternatively, in the case of the
single oven unit, under a worktop with or without a hob unit above.
(b) In an oven/hob arrangement where it is proposed to install the oven directly
below the hob. It is advisable that only slimline hobs are used which have the
following maximum depths.
Kitchen Worktop thickness
Maximum hob depth
(from worktop surface vertically down)
30mm
55mm
40mm
65mm
40mm +
Worktop thickness + 25mm
It is most important that the hob installation instructions are strictly
observed.
29
INSTALLATION INSTRUCTIONS
2. OVEN UNIT HOUSING CABINETS
(a) The oven unit housing cabinet dimensions must comply with Fig. 3 and
Fig. 4.
(b) An air gap of 50mm minimum must be provided at the rear of any top or
bottom cupboards or shelves for ventilation.
(c) Do not obstruct the ventilation slots provided on the oven trim. This is found
adjacent to the bottom of the oven door.
(d) The air gap at the rear allows the warmed air to pass out of the cabinet. If
cabinets extend up to the ceiling, the warm air must be exhausted through
to the front. Fig. 1.
(e) If an oven unit is installed adjacent to a tall cabinet, steam escaping from the
oven when the door is opened could condense on, and perhaps stain the
adjacent surface. To prevent permanent staining, the adjacent surface
should be made of a material that is heat resisting and easy to clean.
Adjacent tall cabinets should not be deeper than the oven housing cabinet.
IMPORTANT
It is essential that the lower cupboard is constructed in the manner illustrated
i.e. having side, back and roof panels so joined as to provide no apertures
which could permit access to the oven unit when installed.
3. ELECTRICAL INSTALLATION
Mains Supply
A 20 amp Double Pole control switch with a minimum contact clearance of 3mm
must be fitted on or recessed in the wall adjacent to the oven housing cabinetry
and should be accessible after installation. If the oven is to be wired into a
connector unit this may be positioned behind the oven providing:–
i. The top of the connector unit is not more than 30cm above the base of the
oven recess – see Fig. 4.
ii. The depth of the connector unit does not reduce the depth of the oven
recess to less than 55cm.
We recommend that 4mm2 twin and earth PVC insulated cable is used to
connect the cooker to the control unit. This power supply cable must conform
to BS 6004.
Alternatively the mains supply can be taken from a household 13 amp switched
fused spur. Having a minimum contact clearance of 3mm which must be fitted
adjacent to the oven housing cabinetry and accessible after installation. The
oven must be fitted with a 3 core cable having a minimum cross sectional area
of 1.5mm2 and must conform to BS6500.
The oven must not be connected using a 3 pin 13 amp plug.
30
INSTALLATION INSTRUCTIONS
Any spare cable must be coiled either behind the oven (not more than 30cm above
the base of the oven recess) or pushed into the air gap below the oven after
installation.
Where a hob is fitted adjacent to or above an oven a 30 amp or 45 amp double pole
switch with a minimum contact clearance of 3mm should be used to feed both units
via separate suitably rated cables.
Where a hob unit is fitted above the oven unit we recommend that 85oC High
Temperature PVC with insulated 3 core flexible cord to table 15 of BS 6141:1991
with a conductor size of 2.5mm2 must be used to connect the hob to the control unit.
Where a hob unit is fitted adjacent to the oven unit, then 4mm2 twin and earth cable
to BS 6004 is recommended to connect the hob unit to the control unit.
In all cases adhere to routing details (see fig. 5).
Your cooker should have been checked to ensure that the voltage corresponds with
your supply voltage, this is stated on the rating plate which is located on the oven
front frame (lower).
CONDUIT BOX TO MAINS TERMINAL BLOCK
(a) The oven unit should be placed on the floor on its carton base in front of the
housing cabinet. The rear of the unit should be in line with the conduit box.
(b) Ensure there is sufficient cable for any future servicing.
(c) Remove the terminal cover. Prepare the cable, pass it through the cable
entry hole in the oven rear panel and fit to terminal block. Secure the cable
clamp and replace the terminal cover.
4. FINAL INSTALLATION
(a) Using a spirit level, check that the housing cabinet is level from side to side and
from front to back in its installed position.
(b) Correct any unevenness by placing spacers under the bottom of the cabinet.
Make sure that the cabinet rests firmly on the floor without rocking.
(c) Before the oven is fitted the cabinet must be firmly secured to the backing wall
for stability.
(d) The oven unit should now be lifted (this requires two people) into the cabinet
and pushed fully home.
(e) Finally the oven unit must be secured to the cabinet. Position the oven side trims
equally about the cabinet sides. This should give an overlap of approx. 1.5mm
per side (see Fig. 2). Secure the oven unit to the cabinet, through the side trims,
by means of the four screws provided, two each side trim.
(f) Remove all packing material from the grill and oven interior.
LIST OF LOOSE ITEMS
4 x No.6 Pozi Head screws
31
INSTALLATION INSTRUCTIONS
Ventilation Slot
if cabinet doesn't fit to ceiling
51 x 457mm minimum area
560mm
Ventilation Slot
if cabinet fits
to ceiling
51 x 457mm
minimum area
50mm
air
gap
Fig. 1
Viewed down through
cabinet
Oven
Fig. 2
Cabinet
50mm
air
gap
as above
Tall Cabinet
When fitting a hob above an oven
always use these installation instructions
in conjunction with the hob instructions.
Use 2.5mm2 High Temp Cable. Refer to
Electrical Installation.
Fig. 3
Built
Under
560m
574m m min
m ma
x
m min
550ming pipes ns
d
tio
lu
exc er projec
th
and o
32
575mm min
580mm max
Side
Trim
1.5mm
Oven Door
No. 6 x 15mm
(4 Supplied)
INSTALLATION INSTRUCTIONS
Fig. 4
Single Oven
in tall
Cabinet
Double Pole
Control Switch
6mm2 Cable if Hotplate
fitted
Conduit Box
4mm2 Cable if hob fitted
adjacent to oven
min
560mm max
574mm
*550
mm
585mm max
575mm if cooker
trim is to
overlap
top edge
of shelf
*excluding pipes
and other
projections
4mm2 Cable
to Oven
Refer to Electrical Installation
Fig. 5
33
SOMETHING WRONG?
Before calling a Service Engineer, please check through the following lists.
THERE MAY BE NOTHING WRONG.
Problem
Check
Nothing works.
(a) Check
If you find :Display is blank.
Then it is likely that there is no electricity supply to your oven.
Check: (i) That the main cooker wall switch is turned on.
(ii) Check other appliances to see if you have a power
cut.
(iii) Check the main circuit breaker for the property.
(iv) With the selector switch (A) turned to
the oven
light does not illuminate.
Display shows 0.00 AUTO. (Cordialle)
The power supply to your oven has possibly been interrupted, but
has now come back on again. Reset the timer to the correct time
of day and "Manual" operation using instructions given in the
timer section of the book.
Main Oven and Grill do not
work (Cordialle)
Check the following to ensure that the timer is in Manual Mode:
Check that the Auto Symbol is not lit up and is not flashing.
See timer section for instructions on how to return timer to
"Manual".
Main Oven and Grill do not
work.
Operating the cooker under the following conditions may cause a
safety device to operate.
(a) Grilling with the door closed - always grill with the door open
to the correct position - see grilling.
(b) Grilling for an excessively long period at maximum setting see grilling guide.
(c) Grilling with inadequate ventilation in the cabinet - see
installation instructions.
Oven does not work.
Check that the selector switch (A) is set to
and that the
temperature control (B) is set to the correct temperature.
Grill does not work.
Check that you have selected :- "Grill" function on the "Oven/Grill
Select" knob (A) and a Grill setting on the Temperature Control
Knob (B) - see grilling page.
Grill keeps turning on and off.
When the Temperature control (B) is operating at less than "6", the
grill will cycle on and off, this is normal and is not a fault.
Can not set an “Auto Cook”
programme
Remember: "Cook Period" is the actual length of time for which,
the timer will switch the oven on as part of an "Auto Cooking" programme.
Draught from beneath control
panel.
A gentle flow of air will be blown from beneath the control panel
when the appliance is used. If the appliance is still warm, this
cooling fan may run on, or restart itself after all of the controls
have been turned off.
The fan will stop once the appliance has been cooled. This is
normal and not a fault.
Timer buzzer/bleeper operates
continually
Buzzer/Bleeper should stop automatically after 2 minutes. If not,
press minute minder button to silence.
If you have been through the above list and there is still a problem; You should identify
your Service Agent using the list on the back page and contact your Local Service Office.
34
Key Contacts
Service
Creda has the largest appliance manufacturer’s service team in Europe,
trained specialists directly employed by us to ensure your complete
confidence.
Repair Service
UK: 08709 066 066
Republic of Ireland: 1850 302 200
You will be asked for the following information:Name, address and postcode.
Telephone number
Model / Serial number of the appliance
Clear and concise details of the query or fault
Place and Date of purchase
(Please keep the receipt as evidence will be required when the engineer calls).
Extended Warranty
To join: UK 08709 088 088
Republic of Ireland: 1850 502 200
Genuine Parts & Accessories
Mail Order Hotline
UK: 08709 077 077
Republic of Ireland: (01) 842 6836
For further product information
08701 546474
All Creda Services are offered as an extra benefit and do not affect your statutory rights.
General Domestic Appliances Limited, Morley Way, Peterborough, PE2 9JB
PRINTED BY SIMLEX . FOUR ASHES, WOLVERHAMPTON.
January 2001 Part No. 400500048-02