BEFORE YO
Before using this product, read the Important Safety and
Take a moment before you get started to fam
H15 Bluetooth® Handsfree Headset. Along w
provided for both charging and storage.
MOTOPURE™
H15
Volume Up
Button
Speaker
Multi-Color
Indicator Light
Volume Down
Button
Call
Button
Quick Start Guide
1
OU BEGIN
Boom
CHARGE
Your Headset's Battery
You need to charge your headset using the
included travel charger or desktop charger.
Charging with travel charger:
d Legal Information pamphlet and follow its instructions.
miliarize yourself with your new MOTOPURE
with your headset, a desktop charger is
Headset Charging
Connector
Charger
Port
1 Remove plastic seal off of ear cushion on
2
Power
Indicator
Light
START HERE >
3
speaker.
Plug the Motorola charger into the end of the
headset.
The indicator light turns red when the battery is
charging. It may take up to 1 minute for the
indicator light to turn on. When the headset's
battery is fully charged (about 2 hours), the
indicator light turns green.
Disconnect the charger.
Note: Headset is not functional while charging with travel
charger.
2
Charging with desktop charger:
Your Phone
2
Your phone's Bluetooth feature is off by default.
To use your headset, you must turn on the
Bluetooth feature in your phone.
1 Plug in the travel charger into the charger port.
2 Plug the headset into the port on the desktop
s
3
START BLUETOOTH
FEATURE
For most Motorola phones (at the main menu):
1 Press M (Menu ) > Settings > Connection >
charger as shown.
The desktop charger light is lit, and the headset
indicator light turns red when the battery is
charging. It may take up to 1 minute for the
headset indicator light to turn on. When the
headset's battery is fully charged (about 2
hours), the headset indicator light turns green.
Remove headset from charger when ready to
use.
Note: Headset is functional while charging with desktop
charger with the boom open. To operate, remove from charger.
Bluetooth Link > Setup.
2 Scroll to Power.
3 Select Change.
4 Scroll to On.
5 Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on
until you turn it off.
r.
Note: This product uses a lithium ion, rechargeable,
non-replaceable battery. Under normal use, the expected life
of the rechargeable battery is approximately 400 charges.
3
PA
Your Headse
Before you can use your headset, you must pair
(link) it with your phone.
Step A - ENSURE HEADSET IS IN PAIRING
MODE
Open the headset boom to power on the
headset and initiate pairing. The indicator light
first flashes during power up, then initiates
easy pairing. After a few moments, the
indicator light will be steadily lit in blue to
indicate headset is in pairing mode.
Indicator Light
(steadily blue
for pairing mode)
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
IR
et and Phone
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
For most Motorola phones:
1 On your Motorola phone, press M (Menu ) >
Settings > Connection > Bluetooth Link > Handsfree
> Look for Devices.
The phone lists Bluetooth devices it finds.
2 Select Motorola H15.
3 Select OK or Yes to pair your headset with
4
5
your phone.
Enter the passkey: 0000
Select OK.
When your headset successfully pairs with
your phone, the indicator light flashes
purple and blue.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
Motorola, Inc.
Motorola, Advocacy
Inc.
Consumer
Office
Consumer
AdvocacyRoad
Office
1307
East Algonquin
1307
East
Algonquin
Road
Schaumburg, IL 60196
Schaumburg, IL 60196
www.motorola.com
www.hellomoto.com
1-877-MOTOBLU
1-877-MOTOBLU
1-888-390-6456
(TTY/TDD United States for
1-888-390-6456
hearing impaired)(TTY/TDD United States for
hearing impaired)
Guide Number: 68000240001-A
Guide Number: 6809500A86-O
4
TEST AND USE
Your phone and headset are now paired and
ready to make and receive calls. To confirm they
are operating properly, make a call:
1 Place the headset over your ear. See
"Wearing the Headset" on the reverse side
of this guide.
2 On the phone, dial the number you want
to call and press SEND key on your phone.
3 If your phone and headset are successfully
Bluetooth QD ID:B013763
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
paired, you will hear ringing on the headset.
After you have successfully paired your phone
and headset, you don't need to repeat these
steps. For daily use, ensure that your headset is
turned ON and that your phone's Bluetooth
feature is ON.
To conserve power, close the boom to turn your
headset off. Re-open the boom to make a call.
© 2008 Motorola, Inc. All rights reserved.
USING A SECOND PHONE?
Multipoint technology allows you to make and
receive calls from two Bluetooth enabled
devices like your personal and business phones.
To pair a second phone to your headset, follow
these steps:
1 Turn off any phones or devices that are
already paired with your headset.
2 Turn off your headset by closing the
headset boom.
3 Perform Step 2 (“Start Bluetooth Feature”),
Step 3 (”Pair”), and Step 4 (”Test and Use”)
to pair your headset with your second phone.
Your most recently paired phone is now your
primary phone for voice dial functionality.
4 To connect to both phones, turn on first
phone.
5 Close the headset boom and then re-open it.
The headset automatically connects to both
phones. The last paired phone is now your
primary phone for voice dial functionality.
TIPS FOR USING H15
WITH TWO PHONES
Use the following tips when using H15's
multipoint technology:
Incoming calls can be answered from both
phones:
– When answering a call, the idle phone is
disconnected from the headset.
– When the call ends, the idle phone is
automatically reconnected to the headset.
Last number redial dials the last outgoing call
made from the primary phone.
Voice dial is accessible from either phone via
different key actions:
– For your primary device (last paired
phone), tap the Call button until you hear
the tone.
– For your secondary device (other paired
phone), tap the Call button and either
Volume button until you hear the tone.
USING YOUR H15
See
Features and
Functions Guide
on the reverse side
for information on
using your H15
TROUBLES
My headset will not enter pairing mode.
Make sure that any devices previously paired
with the headset are turned off. If the indicator
light is flashing in blue, first turn off the other
device, then close and reopen the headset
boom. The indicator light becomes steadily lit in
blue indicating the headset is now in pairing
mode.
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2). If
the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and
pair your phone and headset again (see step 3).
SHOOTING
My headset will not pair with my phone.
If the LED is solid blue, open the boom flip,
and press and hold both Volume buttons
and the Call button for about 10 seconds.
The indicator light flashes (Green, Red,
Blue) 3 times and then become steadily lit.
The headset is now in pairing mode. See
step 3B to complete the pairing process.
If the LED is blinking red, press and hold
both Volume buttons and the Call button
for about 10 seconds. The indicator will
become steadily lit blue. The headset is
now in pairing mode. See step 3B to
complete the pairing process.
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.mororola.com//Bluetoothsupport
TROUBLESHOOTING
My phone does not find my headphones.
Make sure the L indicator light on your
headphones is on and steady when your phone
is searching for devices (see step 3).
My headphones worked with my phone
before but now their not working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2). If
the Bluetooth feature has been turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2). If you
have confirmed the Bluetooth feature is on in
your phone, pair your phone and headphones
again (see step 3).
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.hellomoto.com/bluetooth and click
Support.
Features and
Functions Guide
H15
Bluetooth®
Handsfree Headset
IMPORTANT:
Be sure to first follow the
Quick Start Guide
on the reverse side
of this guide
to complete initial setup
of your H15.
EAR CUSHIONS AND Y
Your H15 headset is supplied with multiple ear
cushions. Your headset’s performance is greatly
dependent upon achieving a good fit on your
ear. Therefore, we recommend trying all the
supplied ear cushions with your headset.
The ear cushion is fitted onto the end of your
headset’s earpiece speaker like shown, and
placed onto your ear when using your headset.
TURNING HEADSET
ON AND OFF
To turn ON your H15, open the headset
boom. The indicator light first flashes blue
three times, then:
●
flashes blue slowly after flashing
purple/blue (if paired and connected with
a phone), or
●
becomes steady blue (if ready to be
paired).
To turn OFF your H15, close the headset
boom. The indicator light will turn off.
Boom
Open To Turn On
Close To Turn Off
YOUR HEADSET
When fitting an oval-shaped ear cushion on
your headset, be sure the cushion is oriented,
as shown below (pointing towards the
microphone).
WEARING THE
HEADSET
To wear your headset, flex the earhook and
loop it over your ear, as shown.
CHANGING FOR USE
ON OTHER EAR
You can wear your H15 headset on your left or
right ear. The headset comes ready for the right
ear. To change the headset for the left ear:
1 Gently lift and pull the
top of the earhook up
and off speaker stem, as
shown.
2 Flip the headset over.
3 Attach the earhook to
Be sure to position the ear cushion into your
ear canal for optimal audio performance and
comfort.
QUICK BATTERY
CHECK
When not in a call or connected, press and
release both Volume buttons.
the speaker stem, as
shown.
USING YOUR
DESKTOP CHARGER
While in the desktop charger, the headset
remains on and still connected to the phone.
The indicator light displays charge status
until you release the buttons. See below for
details on indicator light and available talk
time based on charge status.
Headset Indicator
Red
Yellow
Green
Available Talk Time
Less than 1 hour
1 to 3 hours
Greater than 3 hours
When there is an incoming call, simply take
headset off the desktop charger to answer the
call.
European Union Directives
Conformance Statement
Hereby, Motorola declares that this
product is in compliance with:
• The essential requirements and
other relevant provisions of Directive
1999/5/EC.
MAKING CALLS
Function
Action
Make a voice dial call
(Primary phone)
Tap the Call button
and speak the
name after the tone
Make a voice dial call
(Secondary phone)
Tap the Call button
and either Voume
button and speak the
name after the tone
End a call
Tap the Call button,
and hear a
high-to-low tone
Answer a call
Open the boom or
tap the call button (if
boom is ready open),
hear a low-to-high
tone
Reject a call
Press and hold either
Volume button until
you hear a tone
• All other relevant EU Directives.
Product
Approval
Number
The above gives an example of a typical Product
Approval Number.
You can view your product’s Declaration of Conformity
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at
www.motorola.com/rtte. To find your DoC, enter the
product Approval Number from your product’s label in
the “Search” bar on the web site.
Note: Some features are phone/network dependent.
MAKING CALLS CONTINUED
Function
Action
Redial last call
Press and hold the
Call button until you
hear a tone
Press and hold the
Call button (places
first call on hold), and
hear a tone
Press and hold either
Volume button until
you hear a tone
Press both Volume
buttons and Call
button, and hear a
descending tone
Tap both Volume
buttons until you hear
a tone
Answer a second
incoming call
Reject second incoming
call
Transfer a call from the
headset to the phone
Mute or unmute a call
Note: Your H15 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's guide
for more information.
AUDIO TONES
Audio Tone
Ring tone
Short tone
High to low tone
One short tone when
pressing Volume button
during a call
Low tone
(repeated every
15 seconds)
Low to high tone
No audio indications;
deteriorating quality
Two tones
repeated every minute
Headset Status
Incoming call
Phone network not
available
End call
Volume at minimum
or maximum
Mute reminder
Connection
confirmation/voice
activation
Out of range
Low battery
INDICATOR LIGHT
INDICATOR LIGHT CONTINUED
With No Charger Plugged In
With No Charger Plugged In
Headset Indicator
Headset Status
Red flash
Idle (not connected
to phone)
Slow purple pulse
Connected call muted
Quick blue/purple flashes Pairing successful
Quick red flash
Low battery
Quick blue flash
Incoming call
on primary phone
Incoming call
on secondary phone
Tip: Set your primary and secondary phones to different ring
tones to know which phone is ringing when wearing the
headset. See "Tips for using H15 with Two Phones" for more
information.
Slow blue pulse
Connected (on a call)
Slow blue flash
Standby (not on a call)
Note: After 20 minutes on a call or of inactivity, the light stops
flashing to conserve power, but the headset remains on.
With the Charger Plugged In To Travel Charger
Headset Indicator
Headset Status
Red
Battery level less
than 50% charge
Note: To disable the indicator light, press and hold both
Volume buttons while turnng headset on.
Yellow
Battery level more
than 50% charge
Green
Charging complete
Headset Indicator
Off
Headset Status
Power off
Three blue flashes
Powering on/off
Steady blue
Pairing mode
Quick purple flash
INDICATOR LIGHT
With Headset Plugged In to Desktop Charger
Headset Indicator
Headset Status
Red
Battery level less
than 50% charge
Yellow
Battery level more
than 50% charge
Green
Charging complete
Quick blue flash
Incoming call
on primary phone
Quick purple flash
Incoming call
on secondary phone
INDICATOR LIGHT