WD8200U
XD8100U
Dual Lamp
The Pinnacle of Digital Projectors
Image quality, functionality & reliability
• Dual lamp installation projectors
• 2000:1 contrast ratio
• 6500 ANSI / 7000 ANSI lumens of brightness –
dual lamp (WD8200U / XD8100U)
• Edge blending & Colour matching
Brighter display solutions
The perfect solution for business,
education and entertainment applications
Imagine a long presentation or seminar in a large,
bright room like a hall or auditorium. The impact of
that presentation will depend on the performance of
the projector you use. To ensure that nothing goes
wrong, these projectors are equipped with digital
light processing (DLP TM) technology that reproduces
high-definition images in high contrast and with superior
brightness. Built for durability and easy installation and
maintenance, they last and last with minimal upkeep.
Both models are equipped with dual lamps, allowing the
continuous projection of images for long periods of time
together with greatly increased reliability. For installation
models, our aim was to ensure the advanced level of
performance essential for such units.
For board room, conference hall
For Digital Signage
High Brightness
High Reliability
Powerful Large Screen Images in Well Lit Halls and Auditoriums
7000lm High Brightness*
Durable and Reliable
The XD8100U, delivers super bright 7000 lumen* images. A high brightness
level for presenting in large meeting rooms and conference halls.
*WD8200U is 6500 lumens.
The dual lamp system and lamp relay function enable continuous
operation with no risk of the image going out. Dust resistance and
cooling performance are greatly enhanced by the automated selfcleaning filter and heat-pipe cooling system technologies that have
proven so successful in air conditioners, enabling extended continuous
use for monitoring and digital signage applications.
Dual lamp and
lamp relay mode
24 hours a day, 7 days a week
Anxiety-free continuous operation
Filter cleaned
automatically
High Image Quality
Original Technologies Reproduce Strikingly Sharp Images
Super Resolution
This innovative advanced image processing algorithm is a product of
Mitsubishi Electric. The technology analyzes blurred components of
the original images, estimates the high-resolution data not provided in
the original signal and corrects the image quality. The result is the clear
projection of images such as people’s faces in fine detail.
Estimation of resolution compensation data
Low-resolution image
Enlargement
High resolution data that does not
exist in the enlarged image is
estimated by Mitsubishi’s proprietary
image processing algorithm.
Compensation
Enlarged image (original)
Image processed by Super Resolution
Heat-pipe cooling
system
Lamp Relay Mode
A dual lamp light source offers numerous advantages. Key benefits include
the fact that the lamps can be rested (turned off) alternately during longterm usage, ensuring continuous projection. Additionally, if one of the
lamps goes out, there is an automatic back-up function that activates the
other lamp, enabling nonstop projection with no interruption.
Automatic Self-Cleaning Filter
For the XD8100U and WD8200U, we’ve utilized the same mechanism
(mesh filter and cleaning brush) that has a proven track record in Mitsubishi
Electric air conditioners and air purifiers is utilized.
It automatically prevents dust from building up in
the radiator of the heat-pipe cooling unit for the
digital micromirror device (DMD), thereby ensuring
trouble-free use for extended periods of time.
Heat-pipe Cooling System
Compared to liquid-cooling systems, the heat-pipe cooling system has
a simpler structure and does not require a power supply, enabling cost
reductions and a compact design. Not only is it highly reliable, other
benefits include exceptional energy savings and quietness as well.
Long 4000hrs Lamp Life
Designed with a lamp temperature controlling
system, the XD8100U and WD8200U can support
an estimated lamp rating of up to 4000 hours. The
long estimated lamp life makes dramatic reductions
in overall cost of ownership by decreasing the
frequency of lamp replacements.
Colour matching
The colour matching function corrects variations in the colour reproduced
by each projector when multiple projectors are used simultaneously. This
colour homogenization enables the integrated display of images.
Lamp Life Comparison
Lamp Life Comparison
3,000-hour
lamp
4,000-hour
lamp
3,000-hour
lamp
Factory-installed
lamp
First lamp replacement
Factory-installed lamp
4,000-hour lamp
Factory-installed
lamp
Secound
lampreplacement
First lamp
replacement
First lamp replacement
Factory-installed lamp
3,000 hours 4,000 hours
Lower
running
First
costs
Secound lamp
replacement
lamp replacement
Color matching function
Lower
running
costs
8,000 hours
6,000 hours
3,000 hours 4,000 hours
6,000 hours
8,000 hours
Lamp life is an estimated period based on verification under proper operating conditions and
is not related to the duration of the warranty. The lamp will turn-off automatically when usage
has reached the specified maximum lamp hours. Service life may vary widely depending on
usage and operating environment conditions, as well as adherence to the maintenance and
cleaning procedures provided in the User Manual.
Ample Features for Increased Expressiveness and
Operation Ease
Ultra Quiet 28dBA Operation
Fan noise during projector operation can be distracting during a
presentation or videoconference. The XD8100U and WD8200U projectors
operate at a significantly low noise level of only 28dBA (i.e., using a single
lamp in “low lamp” mode). As a result, presentations and conferences
can be held without the annoyance of a projector fan.
30dBA : A whisper, a suburban
area very late at night
28dBA
40dBA : A quiet neighborhood,
small birds chirping
Natural Colour Matrix (NCM)
In addition to conventional red (R), green (G) and blue (B) colour gradations,
the intermediate colours of yellow (Y), magenta (M) and cyan (C) can each
be controlled independently. Accentuating specified colours according
to need realizes the reproduction of vivid colour tones one step closer
to natural.
Geometric Correction
Keystone Correction
Trapezoidal distortion caused when the
projector is not positioned directly in front
of the screen is corrected in both vertical
and horizontal directions.
Interchangeable Colour Wheel Optional
Choose between two colour wheels, one each accentuating colour and
the other emphasizing brightness, depending on the type of images to be
projected. This interchangeability enables a more appropriate expression
of the images being reproduced.
360° Projection
Images can be projected over a full 360° range along the
vertical axis* including reproduction on the ceiling or floor.
The application possibilities are limitless.
*Excluding use in high-altitude mode.
Remote Control to Match the Installation
ID-compatible Remote Control
ID settings for up to 63 projectors are possible. Setting the IDs allows
control of each individual projector when multiple projectors are installed.
Examples of Noise Levels
20dBA : Rustling leaves, the ticking of
a wall clock (from 1m in front)
Modern Design
A stylish white-toned projector shell was chosen in consideration of use as
a ceiling-mounted installation. Additionally, the detachable terminal cover
hides projector cabling, showing the ingenuity incorporated to ensure an
appealing unit that matches most interior spaces.
screen
Control Projector from Remote Locations
Control operations remotely up to 30m from the projector when using
the wireless remote controller (must be standing in front of the projector).
When using the wired remote controller, projector operation is possible
at a distance of up to 100m.* These options give the presenter the
ability to move more freely at big venues, such as a large meeting rooms
or auditoriums.
*Depends on cable performance.
Network Connectivity
Projectors are equipped with a RJ-45 LAN terminal for remote operation.
Additionally, when used with Crestron® software, integrated control of
up to 250 projectors including power on/off control, message display
and confirmation of lamp service hours is possible using RoomView™/
e-Control™. Both projectors are equipped with AMX Device Discovery
for simplified device management and compatible with PJLink™.
Cornerstone Correction
Pixel conversion is used to correct trapezoidal and diagonal distortion
that causes oblique images, ensuring the proper aspect ratio.
Curved Surface Projection Correction
These projectors are equipped with a function for correcting distortion
that occurs when projecting images onto curved surfaces. This advanced
feature is practical for unique applications such as projecting images onto
pillars at special event sites.
Edge Blending and Colour Matching
Edge Blending
Edge blending creates a seamlessMultiple projectors side-by-side
Multiple projectors side-by-side
image by adjusting the brightness at
adjoining edges when using multiple
projectors side-by-side to reproduce
single widescreen images.
Edge blending function
Image overlap apparent
Edge blending function
Image overlap apparent
With edge blending
Without edge blending
With edge blending
Without edge blending
*The trademark of PJLink is trademark applied for registration or registered trademark in
Japan, the United States, and other countries and areas.
Stand-by Mode under 0.3W*
Stand-by (low) mode power consumption is less than 0.3W, offering
increased energy savings and further contributing to environmental
preservation. *When in stand-by (low) mode. At this time, use of the
LAN function, RS-232C output and Remote 1 is not possible.
• Motorized lens shift
• 2-screen mode (PinP : XD8100U / Split: WD8200U)
•Test pattern
• Mechanical shutter
• Direct power off
• Lamp side replacement
• Closed caption support
• High-altitude mode (2,000-2,700m)
• OSD menu multi-language compatibility (19 languages)
Specifications
Model
WD8200U / WD8200LU
Display technology
WD8200U / WD8200LU
XD8100U / XD8100LU
0.7" 1chip DMD, 12˚. LVDS,
Dark Chip 3TM with DDP3020(F)
Resolution
1280 x 800 (Total 1,024,000 pixels)
1024 x 768 (Total 786,432 pixels)
Brightness
Dual-lamp : 6500 lm
Single lamp : 3250 lm
Dual-lamp : 7000 lm
Single lamp : 3500 lm
Contrast ratio*1
2000 : 1 (on/off)
Projection lens*1
f=24.5-33.1mm, F=2.0-2.4
Zoom / focus*1
Powered focus / zoom (zoom ratio 1.35 : 1)
Picture size
40"-300" (100"=3.8m)
Source lamp
Dual / Single
Dual
Dual
Single
Single
Connection Terminals
2 3
1
1 S-Video/Video
4
5
6 7
8 9
2 PC/Component video input-1
3 Remote-1
4 PC/Component video input-2
Video compatibility
NTSC / NTSC 4.43 / PAL (including PAL-M, N) / SECAM / PAL-60
Component video; 480i/p(525i/p), 576i/p(625i/p), 720p(750p 50/60Hz),
1080i(1125i 50/60Hz), 1080p(1125p 50/60Hz)
SCART (RGB + 1V sync, only mini D-sub 15-pin Terminal)
Input terminals
PC; 5 BNC x 1, mini D-sub 15-pin x 1, DVI-D(with HDCP) x 1
Video; BNC x 1, S-Video (4-pin) x 1, HDMI (Ver 1.3, Deep Colour) x 1
Communication
terminals
LAN (RJ-45) ; x 1 (projector control), RS-232C (in) ; D-Sub 9pin(male) x 1 (direct command is available.),
RS-232C (out); D-sub 9-pin(male) x 1 (direct command is available.)
Wired remote (in); x 1 ( 3.5mm stereo mini jack), Wired remote (out) : x 1 ( 3.5mm stereo mini jack),
9 LAN (RJ-45)
10 Power in(3-pin with earth ternibal)
11 Main power switch
:Off :On
10
Dimensions (unit: mm)
11
342
Resolution ; 640 x 400 - 1920 x 1200
True ; 1024 x 768, Sync-on-Green available
Remote; D-sub 9-pin(female) x 1
Dimensions (W x H x D)
490 x 201 x 421mm / 19.3 x 7.9 x 16.6 inch (exclude detachable terminal cover and protrusion)
Weight
16.0kg / 35.3lbs (exclude detachable terminal cover)
Power supply
AC 100 - 240 V, 50/60 Hz
506
142
*1 Varies depending on conditions. *The above specifications are for the standard lens model only. Specifications are different
for lens-less models. * Compliant with ISO21118 - 2005. * SXGA, XGA and SVGA are registered trademarks of IBM
Corporation. * All brand names and product names are trademarks, registered trademarks or trade names of their respective
holders. * It's an estimated life time and the lamp is to be shut off upon the arrival. Lamp life refers to the average time required
for brightness to be reduced by half, and not the time specified in the warranty. Service life may vary widely depending on the
environment and conditions, and whether or not cleaning and other maintenance procedures are followed.
192
421
hour *2
2,000 hours
4,000 hours
4,000 hours
8,000 hours
Resolution ; 640 x 400 - 1920 x 1200
True ; 1280 x 800, Sync-on-Green available
6 HDMI
8 Serial RS-232C (I/O)
40"-300" (100"=3.5m)
Lamp mode
Normal
Low
Normal
Low
Computer
compatibility
5 Remote-2 (IN/OUT)
7 DVI-D terminal (with HDCP, DVI-D 24-pin)
XD8100U / XD8100LU
0.65" 1Chip DMD, 12˚. LVDS,
Dark chip 2TM with DDP3020(F)
Screen Size and Projection Distance
Refer to the following table to determine the screen size and projection distance.
Front projection
Front projection, ceiling mounting
W1
W1
W
W1
H1
Centre of the lens
Centre of the lens
9
L
L
H2
L
Maximum projection area
L
120
H1
192
H
H
HOLES FOR HANGER (4 PLACES) [M4XDEPTH 10]
W
H2
240
490
W1
Maximum projection area
* The lens focal point is the default set at the time of shipment from the factory.
Options
WD8200U
Optional Lenses
OL-XD2000FR
Rear-projection Short -throw
Fixed Lens
OL-XD2000SZ
OL-XD2000LZ
Short-throw Zoom Lens
Long-throw Zoom Lens
Converter Lens
(mounted on the standard lens)
Converter Lens
(mounted on the standard lens)
Optional Lenses
OL-XD2000TZ
OL-XD8000UZ
Telescopic-throw Zoom Lens
Ultra-telescopic-throw Zoom Lens
Colour Wheel
CW-FC2
Color-emphasized color wheel
Specifications are subject to change without notice (E&O.E)
Image(WXGA 16: 10)
Diagonal Size Width
Height
inch cm inch cm inch cm
40 102 34 86 21 54
60 152 51 129 32 81
80 203 68 172 42 108
100 254 85 215 53 135
150 381 127 323 79 202
200 508 170 431 106 269
250 635 212 538 132 337
300 762 254 646 159 404
Distance from Screen
Default Height
Shortest(Wide) Longest(Tele) Projected Image(HO)
inch m inch m
inch
cm
58 1.5 80 2.0
0
0
88 2.2 121 3.1
0
0
118 3.0 162 4.1
0
0
148 3.8 203 5.2
0
0
224 5.7 306 7.8
0
0
299 7.6 408 10.4
0
0
375 9.5
0
0
450 11.4 0
0
H1
10
15
19
24
36
49
61
73
Movable V Position
H2 H1
inch
cm
5 25 0
0
7 37 0
0
9 49 0
0
0 11 62 0
0 17 92 0
0 23 123 0
0 28 154 0
0 34 185 0
3
5
7
9
13
17
21
26
Movable H Position
W1
W1
inch
cm
3
0
9
0
5 13 0
0
7 17 0
0
9 22 0
0
13 33 0
0
17 44 0
0
21 55 0
0
26 65 0
0
9
13
17
22
33
44
55
65
3
5
6
8
12
16
20
24
Movable H Position
W1
W1
inch
cm
3
0
8
0
5 12 0
0
6 16 0
0
8 20 0
0
0 12 30 0
0 16 41 0
0 20 51 0
0 24 61 0
8
12
16
20
30
41
51
61
H2
12
17
23
29
43
58
72
86
XD8100U
Distance from Screen
Screen(XGA 4: 3)
Movable V Position
Default Height
Diagonal Size Width
Height Max. Zoom Min. Zoom Projected Image(H) H1
H2 H1
inch cm inch cm inch cm inch m inch m
inch
cm
inch
cm
40 102 32 81 24 61 54 1.4 74 1.9
0
0
0
12
2 30 0
60 152 48 122 36 91 82 2.1 112 2.8
0
0
0
3 46 0
18
80 203 64 163 48 122 110 2.8 150 3.8
0
0
0
4 61 0
24
100 254 80 203 60 152 138 3.5 189 4.8
0
0
0
30
6 76 0
150 381 120 305 90 229 208 5.3 284 7.2
0
0
0
8 114 0
45
200 508 160 406 120 305 279 7.1 380 9.7
0
0
0 11 152 0
60
250 635 200 508 150 381 349 8.9
0
0
0 14 191 0
75
300 762 240 610 180 457 419 10.6 0
0
0 17 229 0
90
* The above figures are approximate and may be slightly different from the actual measurements.
H2
6
9
11
14
21
28
36
43