R4130/R5130 R6130/R7130

All technical modifications reserved. 08/08. TSC 08.0618
360 ROTARY SHAVER
FLEX AND PIVOT TECHNOLOGY
1
2
4
6
Model No. R4130/R5130/R6130/R7130
10/UK/R4130/R5130/R6130/R7130 Version 06/10 Part No. T22-29885
Remington® Registered Trade Mark of Spectrum Brands, Inc., or one
of its subsidiaries
VARTA Consumer Batteries GmbH & Co. KGaA
Alfred-Krupp-Str. 9
73479 Ellwangen
Germany
www.remington-europe.com
© 2010 SBI
5
R4130/R5130
R6130/R7130
080618_REME_IFU_Cover_RZ.indd Spread 1 of 2 - Pages(1, 2, 3)
07.08.2008 23:20:06 Uhr
REMINGTON® SERVICE HOTLINES
United Kingdom
+44 0800 212 438 (free call)
UK Rayovac Europe Ltd
Watermans House, Kingsbury Crescent,
The Causeway, Staines, Middlesex,
TW18 3BA, UNITED KINGDOM
www.remington.co.uk
For details of local Distributors in countries not listed above
call the German office on +49 (0) 7961 83 784
0
1
080618_REME_IFU_Cover_RZ.indd Spread 2 of 2 - Pages(4, 5, 6)
2
3
4
5
07.08.2008 23:20:07 Uhr
ENGLISH
NL
D
Thank you for choosing Remington®. Our products are designed to meet the
highest standard of quality, functionality and design. We hope you enjoy using
your new Remington® appliance. Please read the instructions for use carefully
and keep in a safe place for future reference.
CAUTION
Use this appliance only for its intended use as described in this manual. Do not use
attachments not recommended by Remington®.
I
o not use this product if it is not working correctly, if it has been dropped or damaged,
D
or dropped into water.
Description
1 Pivoting Head & cutter assembly
2 Head release button
3 Individual flexing heads
Push button
4 On/Off
5 Power port
6 LED light (R4130):
- Green charging indicator
LED light (R5130):
- Green charging indicator
- Red low battery indicator
LCD Display (R6130/R7130):
- Minutes remaining
- Recharge warning
7 Trimmer button
8 Head guard
9 Power plug
10 Cleaning brush
080156_REME_IFU_innen_RZ.indd 1
07.03.2008 16:43:14
ENGLISH
Feature
E
R4130
R5130
R6130
R7130
Power System
Cordless
Cord/
Cordless
Cord/
Cordless
Cord/
Cordless
Full Charge Time
16 hours
90 minutes
90 minutes
90 minutes
30 minutes
30 minutes
60 minutes
60 minutes
Cordless Shave
Time
Quick Charge
No
Yes
Yes
Yes
Indicators
Single green
LED for
charging
Fuel gauge
LCD
LCD
Voltage Type
Worldwide
Worldwide
Worldwide
Worldwide
Replacement
Part No.
SP-SFD2
SP-TF2
SP-DF2
SP-DF2
CO
Co
CA
Extend
SH
Swi
Use
Ho
inde
Stre
On
the
Use
GETTING STARTED
TR
Pus
pro
swi
For best shaving performance, it is recommended that you use your new shaver daily
for up to four weeks to allow time for your beard and skin to become accustomed to
the new shaving system.
CHARGING YOUR SHAVER
Always ensure that your hands, shaver and power cord are dry before charging your
shaver.
Ensure the shaver is switched off. Connect the shaver to the adapter (Fig. A), then to the
mains (Fig. B) and charge for at least 24 hours when using for the first time (Fig. C).
R7130 – Place your shaver in the charging stand, connect the charging adaptor to the stand
and then to the mains.
Charge for at least 24 hours when using for the first time.
After the shaver batteries are fully charged, the green indicator light will blink (R4130),
the fuel gauge (R5130) or the LCD display (R6130/R7130) will indicate the shaver is fully
charged.
Use product until the battery is low. This is indicated by illuminated red light or the LCD
display.
Fully recharge for 24 hours every 6 months to maintain battery condition.
When empty, the battery will be fully charged around 90 minutes for the R5130, R6130,
R7130, and around 16 hours for the R4130.
The shaver adapts automatically to a mains voltage between 100V and 240V.
Tip
Ensu
thre
mov
espe
DO
Care f
shaver
and sh
produ
and ke
080156_REME_IFU_innen_RZ.indd 2
07.03.2008 16:43:14
CORDED USE (R5130, R6130, R7130)
Connect the shaver to the adapter, then to the mains and recharge for 5 min. before using.
CAUTION:
Extended mains only use will result in the reduction of the battery life.
NL
s
es
ENGLISH
es
nd
SHAVING
Switch the shaver on (Fig. D).
Use the trimmer to remove long hair first (see below).
Hold the shaving head so all three heads touch your face simultaneously (Fig.E). The
independently floating heads will automatically adjust to the contours of your face.
Stretch the skin with your free hand so the hairs stand upright.
Only apply light pressure on the shaving head while shaving (pressing too hard can damage
the heads and make them vulnerable to breakage).
Use short, circular strokes.
I
de
How to use
TRIMMING
Push the trimmer button down (Fig. F). Place trimmer at desired trim line for a quick, easy,
professional trim. Hold the shaver as shown in the illustration (Fig. G). To retract and
switch off the trimmer, push the trimmer lock button in and downwards (Fig. H).
Tips for best results
Ensure your skin is dry. Always hold the shaver at right angles to the skin so that all
three heads are touching the skin with equal pressure. Use moderate to slow stroking
movements. The use of short circular motions in stubborn areas may obtain a closer shave,
especially along the neck and chin line.
DO NOT press hard against the skin in order to avoid damage to the rotary heads.
Care for your SHAVER
Care for your product to ensure a long lasting performance. We recommend you clean your
shaver after each use. Using the brush supplied clean the internal parts of the head assembly
and shaver body. The easiest and the most hygienic way to clean the shaver is by rinsing the
product head after use with warm water. Always keep the protective cap on the shaving head
and keep the trimmer in the “off” position when the shaver is not in use.
080156_REME_IFU_innen_RZ.indd 3
07.03.2008 16:43:15
ENGLISH
E
CLEANING DAILY
Ensure the shaver is switched off and unplugged from the mains.
Open the shaver head by pressing the release button on the front of the shaver (Fig. I) and
flipping open the head away from the body of the shaver (Fig. J).
Rinse the shaver head with warm water (Fig. K).
Close head assembly (Fig. L).
lw
A
On
Do
Kee
red
give
or s
CLEANING WEEKLY
Perform the daily cleaning steps first.
Open the shaver head by pressing the release button on the front of the shaver (Fig. I)
and flipping open the head away from the body of the shaver (Fig. J).
Release the inner cutter carrier by rotating the locking arms counter-clockwise (Fig. M)
Pull the inner cutter carrier away from the inner cutters (Fig. N).
Thoroughly brush hairs from the inner and outer cutters (Fig. P) and rinse out remaining debris .
Replace inner cutter (Fig.O).
Place the inner cutter carrier back onto the upper hairpocket and lock in place by rotating
the locking arms clockwise until the arms ‘click’ into place (Fig. Q - R)
If yo
ext
occ
You
cha
the
CAUTION:
Never submerge your shaver in water. The shaver can be rinsed with water. The water
temperature should not exceed 70 degrees. Attention. Unplug the shaver before cleaning with
water. Keep the adaptor and cable dry.
CLEANING TRIMMER
Lubricate the teeth of the trimmer every six months with one drop of sewing machine oil.
This a
batter
restri
collec
to rem
‘Batte
recycl
CA
Do no
080156_REME_IFU_innen_RZ.indd 4
07.03.2008 16:43:15
nd
ad
ith
ENGLISH
IMPORTANT sAfeTY INsTRUCTIONs
WARNING – TO ReDUCe THe RIsK Of bURNs, eLeCTROCUTION, fIRe,
OR INJURY TO PeRsONs:
An appliance should never be left unattended when plugged in to a power outlet, except
when charging. Keep the power adaptor and cord away from heated surfaces.
Make sure the power adaptor and cord do not get wet.
Do not plug or unplug the shaver with wet hands.
Do not use the product with a damaged cord. A replacement can be obtained via the
Remington® Service Center.
Charge, use and store the product at a temperature between 15°C and 35°C.
lways unplug from the mains when cleaning or when being used under running water.
A
Only use parts supplied or recommended by Remington®.
Do not submerge.
Keep this product out of reach of children. The use of this appliance by persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge can
give cause to hazards. Persons responsible for their safety should give explicit instructions
or supervise the use of the appliance.
TROUBLESHOOTING
If your shaver battery is completely empty or the shaver has not been used for an
extended period of time, the shaver may not start when operated using the cord. If this
occurs, charge the shaver for approximately 15 sec. before shaving.
Your shaver should be mainly used in cordless mode and only recharged when battery
charge is low. Extended mains only use or continuous connection to the mains will result in
the reduction of the battery life.
080156_REME_IFU_innen_RZ.indd 5
07.03.2008 16:43:16
ENGLISH
E
bATTeRY ReMOVAL
DANGeR:
Once the shaver has been dismantled for disposal, do not attempt to reassemble and/or use.
Unplug the shaver.
Remove the head from the shaver (Press release button and pull head straight away from
the shaver body)
Using a small screwdriver, pry front cover from the shaver.
Remove the 4 screws located on the front of shaver. (Fig. S)
Remove rear cover from inner housing to expose batteries (Fig. T)
Pry batteries free from circuit board and cut wires (Fig. U – V)
Dispose of batteries
PROTeCT THe eNVIRONMeNT
This appliance contains an environmental friendly rechargeable Nickel Metal Hydride
battery. Do not dispose the appliance or the battery in the household waste as
restrictions exist in most countries. Adhere to the national or local regulations for
collection and disposal that apply for your specific location. In case you are required
to remove the battery from the appliance for separate disposal see instructions in the
‘Battery Removal’ section on how to open the housing. For further information on
recycling see www.remington-europe.com
CAUTION:
Do not put in fire or mutilate your battery packs as they may burst or release toxic materials.
For further information on recycling see www.remington-europe.com
080156_REME_IFU_innen_RZ.indd 6
07.03.2008 16:43:16
seRVICe AND WARRANTY
NL
This product has been checked and is free of defects. We warrant this product against
any defects that are due to faulty material or workmanship for a 2 year period from the
original date of consumer purchase. If the product should become defective within the
warranty period, we will repair any such defect or elect to replace the product or any part
of it without charge provided there is proof of purchase. This does not mean an extension
of the warranty period.
In the case of a warranty simply call the Remington ® Service Center in your region.
This warranty is offered over and above your normal statutory rights.
The warranty shall apply in all countries in which our product was sold via an authorised
dealer.
I
e.
ENGLISH
This warranty does not include shaving heads / foils and cutters which are consumable
parts. Also not covered is damage to the product by accident or misuse, abuse, alteration
to the product or use inconsistent with the technical and/or safety instructions required.
This warranty shall not apply if the product has been dismantled or repaired by a person
not authorised by us.
rt
n
n
080156_REME_IFU_innen_RZ.indd 7
07.03.2008 16:43:17
080156_REME_IFU_innen_RZ.indd 8
07.03.2008 16:43:17