Motherboard
VANGUARD B85
E8519
First Edition V1
August 2013
Copyright © 2013 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless
such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation and to the
owners’ benefit, without intent to infringe.
Offer to Provide Source Code of Certain Software
This product contains copyrighted software that is licensed under the General Public License (“GPL”),
under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software
Licenses. Such software in this product is distributed without any warranty to the extent permitted by the
applicable law. Copies of these licenses are included in this product.
Where the applicable license entitles you to the source code of such software and/or other additional data,
you may obtain it for a period of three years after our last shipment of the product, either
(1) for free by downloading it from http://support.asus.com/download
or
(2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location
where you want to have it shipped to, by sending a request to:
ASUSTeK Computer Inc.
Legal Compliance Dept.
15 Li Te Rd.,
Beitou, Taipei 112
Taiwan
In your request please provide the name, model number and version, as stated in the About Box of the
product for which you wish to obtain the corresponding source code and your contact details so that we
can coordinate the terms and cost of shipment with you.
The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as
the corresponding binary/object code.
This offer is valid to anyone in receipt of this information.
ASUSTeK is eager to duly provide complete source code as required under various Free Open Source
Software licenses. If however you encounter any problems in obtaining the full corresponding source
code we would be much obliged if you give us a notification to the email address gpl@asus.com, stating
the product and describing the problem (please DO NOT send large attachments such as source code
archives, etc. to this email address).
ii
Contents
Safety information....................................................................................... iv
About this guide.......................................................................................... iv
Package contents........................................................................................ vi
VANGUARD B85 specifications summary................................................. vi
Chapter 1
Product introduction
1.1
Before you proceed...................................................................... 1-1
1.2
Motherboard overview.................................................................. 1-1
1.3
Central Processing Unit (CPU).................................................... 1-3
1.4
System memory............................................................................ 1-7
1.5
Expansion slots........................................................................... 1-14
1.6
Jumpers....................................................................................... 1-16
1.7
Connectors.................................................................................. 1-17
1.8
Onboard LED............................................................................... 1-26
1.9
Software support......................................................................... 1-27
Chapter 2
BIOS information
2.1
Managing and updating your BIOS............................................. 2-1
2.2
BIOS setup program..................................................................... 2-6
2.3
My Favorites................................................................................ 2-10
2.4
Main menu................................................................................... 2-11
2.5
Ai Tweaker menu......................................................................... 2-13
2.6
Advanced menu.......................................................................... 2-25
2.7
Monitor menu.............................................................................. 2-34
2.8
Boot menu................................................................................... 2-37
2.9
Tools menu.................................................................................. 2-43
2.10
Exit menu..................................................................................... 2-44
Appendices
Notices........................................................................................................A-1
ASUS contact information........................................................................A-3
iii
Safety information
Electrical safety
•
To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
•
When adding or removing devices to or from the system, ensure that the power cables
for the devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you add a device.
•
Before connecting or removing signal cables from the motherboard, ensure that all
power cables are unplugged.
•
Seek professional assistance before using an adapter or extension cord. These devices
could interrupt the grounding circuit.
•
Ensure that your power supply is set to the correct voltage in your area. If you are not
sure about the voltage of the electrical outlet you are using, contact your local power
company.
•
If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your retailer.
Operation safety
•
Before installing the motherboard and adding components, carefully read all the manuals
that came with the package.
•
Before using the product, ensure all cables are correctly connected and the power
cables are not damaged. If you detect any damage, contact your dealer immediately.
•
To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
•
Avoid dust, humidity, and temperature extremes. Do not place the product in any area
where it may be exposed to moisture.
•
Place the product on a stable surface.
•
If you encounter technical problems with the product, contact a qualified service
technician or your retailer.
About this guide
This user guide contains the information you need when installing and configuring the
motherboard.
How this guide is organized
This guide contains the following parts:
•
Chapter 1: Product introduction
This chapter describes the features of the motherboard and the new technology it
supports. It includes descriptions of the switches, jumpers, and connectors on the
motherboard.
•
Chapter 2: BIOS information
This chapter discusses changing system settings through the BIOS Setup menus.
Detailed descriptions fo the BIOS parameters are also provided.
iv
Where to find more information
Refer to the following sources for additional information and for product and software
updates.
1.
ASUS websites
The ASUS website provides updated information on ASUS hardware and software
products. Refer to the ASUS contact information.
2.
Optional documentation
Your product package may include optional documentation, such as warranty flyers,
that may have been added by your dealer. These documents are not part of the
standard package.
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when
completing a task.
CAUTION: Information to prevent damage to the components when
completing a task
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
Typography
Bold text
Indicates a menu or an item to select.
Italics
Used to emphasize a word or a phrase.
<Key>
Keys enclosed in the less-than and greater-than sign
means that you must press the enclosed key.
Example: <Enter> means that you must press the Enter or
Return key.
<Key1> + <Key2> + <Key3>
If you must press two or more keys simultaneously, the key
names are linked with a plus sign (+).
Package contents
Check your motherboard package for the following items.
nual
User Ma
ASUS VANGUARD B85 motherboard
Technical documentations,
certification and warranty card
Support DVD
2 x Serial ATA 6.0 Gb/s cables
1 x 2-in-1 ASUS Q-Connector kit
1 x ASUS Q-Shield
•
If any of the above items is damaged or missing, contact your retailer.
•
The illustrated items above are for reference only. Actual product specifications may
vary with different models.
VANGUARD B85 specifications summary
CPU
LGA1150 socket for 4th Generation Intel® CoreTM i7/i5/i3, Pentium®/Celeron®
Processors
Supports Intel® 22nm CPU
Supports Intel® Turbo Boost Technology 2.0
* The Intel® Turbo Boost Technology 2.0 support depends on the CPU types.
** Refer to www.asus.com for CPU support list.
Chipset
Intel® B85 Express Chipset
Memory
4 x DIMM, max. 32GB, DDR3 1600/1333 MHz, non-ECC, un-buffered memory
Dual-channel memory architecture
Supports Intel® Extreme Memory Profile (XMP)
* Due to chipset limitation, memory modules higher than 1600MHz will run at 1600MHz
frequency for better stability.
**Refer to www.asus.com or this user manual for the Memory QVL (Qualified Vendors
List).
Expansion
Slots
1 x PCI Express 3.0/2.0 x16 slot
1 x PCI Express 2.0 x16 slot [black] (max. at x4 mode, compatible with PCIe x1 and
x4 devices)
1 x PCI Express 2.0 x1 slot
1 x PCI slot
(continued on the next page)
vi
VANGUARD B85 specifications summary
VGA
Integrated graphics processor - Intel® HD Graphics support
Multi-VGA output support: DP/HDMI/DVI/D-sub port
- Supports DisplayPort 1.2* with max. resolution of 4096 x 2160
@24Hz/3840 x 2160 @60Hz
- Supports HDMI with max. resolution of 4096 x 2160 @24Hz/2560 x
1600 @60Hz
- Supports DVI with max.resolution of 1920 x 1200 @60Hz
- Supports D-sub with max. resolution of 1920 x 1200 @60Hz
Supports Intel® InTruTM 3D/Quick sync Video/Clear Video HD Technology/
InsiderTM
Supports up to 3 displays simultaneously
Maximum shared memory of 1024MB
* DP 1.2 Multi-Stream Transport compliant, supports DP 1.2 monitor daisy chain up
to 3 displays
Multi-GPU support
Supports AMD® Quad-GPU CrossFireXTM Technology
Storage
Intel® B85 Express Chipset:
- 4 x Serial ATA 6.0 Gb/s connectors (brown)
- 2 x Serial ATA 3.0 Gb/s connectors (black)
- Support Intel® Rapid Start Technology, Intel® Smart Connect
Technology*
* These functions will work depending on the CPU installed
LAN
Intel® I217V Gigabit LAN controller
Audio
Realtek® ALC887 8-channel High Definition Audio CODEC
- Supports Jack-Detection, Multi-streaming and Front Panel JackRetasking
USB
Intel® B85 Express Chipset - supports ASUS USB 3.0 Boost
- 2 x USB3.0/2.0 ports at mid-board for front panel support
- 4 x USB3.0/2.0 ports at back panel (blue)
- 8 x USB2.0/1.1 ports (6 ports at mid-board, 2 ports at back panel)
Exclusive TUF
Features
“Ultimate COOL!” Thermal Solution:
- TUF Thermal Radar Core
“TUF ENGINE!” Power Design:
- 4+1 Digital Phase Power Design
-T
UF Components (Alloy Choke, 10K Ti--Cap & MOSFET, certified by
military-standard)
- ASUS DIGI+ VRM
“Safe & Stable!” Guardian Angel:
- ESD Guards
(continued on the next page)
vii
VANGUARD B85 specifications summary
Other Special
Features
- USB 3.0 Boost featuring speedy USB3.0 transmission
- Ai Charger
- ASUS UEFI BIOS EZ Mode featuring friendly graphics user interface
- AI Suite 3
- ASUS Q-Connector
- ASUS Q-Shield
- ASUS Q-LED (CPU, DRAM, VGA, Boot Device LED)
- ASUS Q-Slot
- ASUS Q-DIMM
- ASUS O.C. Profile
- ASUS CrashFree BIOS 3
- EZ Update
- Disk Unlocker
- ASUS EZ Flash 2
- Multi-language BIOS
- Intel® Small Business Advantage
Back Panel I/O Ports
1 x PS/2 keyboard/mouse combo port
1 x DisplayPort
1 x HDMI port
1 x DVI-D port
1 x D-sub port
1 x LAN (RJ45) port
4 x USB 3.0/2.0 ports (blue)
2 x USB 2.0/1.1 ports
8-channel audio I/O ports
Internal I/O
Connectors
1 x USB 3.0/2.0 connector supports additional 2 USB 3.0/2.0 ports (19pin, moss green)
3 x USB 2.0/1.1 connectors support additional 6 USB 2.0/1.1 ports
4 x SATA 6Gb/s connectors (brown)
2 x SATA 3Gb/s connectors (black)
1 x CPU fan connector (4-pin black) for both 4-pin (PWM mode) and 3-pin
(DC mode) CPU coolers control
4 x Chassis fan connectors (4-pin black)
Front panel audio connector (AAFP)
24-pin EATX power connector
8-pin EATX 12V power connector
System panel connector (Q-Connector)
1 x S/PDIF Out header
1 x TPM Header
1 x Clear CMOS jumper
1 x COM port
1 x chassis intrusion jumper
(continued on the next page)
viii
VANGUARD B85 specifications summary
BIOS
128 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI 2.7, WfM2.0, SM
BIOS 2.7, ACPI 5.0, Multi-language BIOS, ASUS EZ Flash 2, ASUS
CrashFree BIOS 3, My Favorites, Quick Note, Last Modified log, F12
PrintScreen, F3 Shortcut functions, and ASUS DRAM SPD (Serial
Presence Detect) memory information
Manageability
WfM 2.0, DMI 2.7, WOL by PME, PXE
Support DVD
Drivers
Anti-virus software (OEM version)
ASUS/TUF CPU-Z
ASUS utilities
Network iControl
Operating System
Support
Windows® 8
Form Factor
uATX Form Factor: 9.6”x 9.6” (24.4cm x 24.4cm)
Windows® 7
Specifications are subject to change without notice.
ix
Product introduction
1.1
Before you proceed
1
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
1.2
•
Unplug the power cord from the wall socket before touching any component.
•
Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.
•
Hold components by the edges to avoid touching the ICs on them.
•
Whenever you uninstall any component, place it on a grounded antistatic pad or in the
bag that came with the component.
•
Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.
Motherboard overview
Before you install the motherboard, study the configuration of your chassis to ensure that the
motherboard fits.
Unplug the power cord before installing or removing the motherboard. Failure to do so can
cause you physical injury and damage to motherboard components.
1.2.1
Placement direction
When installing the motherboard, place it into the chassis in the correct orientation. The edge
with external ports goes to the rear part of the chassis as indicated in the image.
1.2.2
Screw holes
Place eight screws into the holes indicated by circles to secure the motherboard to the
chassis.
Do not overtighten the screws! Doing so can damage the motherboard.
ASUS VANGUARD B85
1-1
Place this side
towards the rear
of the chassis
1.2.3
Motherboard layout
1
2
KBMS_USB34
24.4cm(9.6in)
DIGI+
VRM
3
4
3
CHA_FAN3
CPU_FAN
DP_HDMI
BATTERY
VGA_LED
24.4cm(9.6in)
EATXPWR
TPU
USB3_12
AUDIO
6
BOOT_DEVICE_LED
Super
I/O
Intel®
B85
PCI1
6
SATA6G_12
Intel
I217 V
PCIEX1_1
1
5
PCIEX16_1
ASM
1083
3
DRAM_LED
DDR3 DIMM_B2 (64bit, 240-pin module)
CHA_FAN2
CPU_LED
LAN_USB3_5E2
DDR3 DIMM_B1 (64bit, 240-pin module)
LGA1150
USB3_E34
DDR3 DIMM_A2 (64bit, 240-pin module)
DVI_VGA
DDR3 DIMM_A1 (64bit, 240-pin module)
EATX12V
7
SATA6G_3
16Mb
BIOS
PCIEX16_2
ALC
887
SPIDF_OUT
CHA_FAN4
TPM
COM
USB910
USB1112
USB1314 CHA_FAN1 PANEL
AAFP
18
1-2
16
SATA3G_56
SB_PWR SATA6G_4
8
CLRTC CHASSIS
15
3
14
13
12
3
11
10
9
Chapter 1: Product introduction
1.2.4
Layout contents
Connectors/Jumpers/Slots/LED
1. ATX power connectors (24-pin EATXPWR, 8-pin ATX12V)
2. Intel® LGA1150 CPU socket
3. CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN1~4)
4. DDR3 DIMM slots
5. USB 3.0 connector (20-1 pin USB3_12)
6. Onboard LED (SB_PWR)
7. Intel® B85 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1~4 [brown])
8. Intel® B85 Serial ATA 3.0Gb/s connectors (7-pin SATA3G_1~2 [black])
9. Chassis intrusion jumper (4-1 pin CHASSIS)
10. Clear RTC RAM (3-pin CLRTC)
11. System panel connector (20-8 pin F_PANEL)
12. USB 2.0 connectors (10-1 pin USB910, USB1112, USB1314)
13. Serial port connectors (10-1 pin COM)
14. TPM connector (20-1 pin TPM)
15. Front panel audio connector (10-1 pin AAFP)
16. Digital audio connector (4-1 pin SPDIF_OUT)
1.3
Page
1-19
1-3
1-21
1-7
1-24
1-26
1-22
1-23
1-22
1-16
1-25
1-26
1-24
1-20
1-20
1-19
Central Processing Unit (CPU)
This motherboard comes with a surface mount LGA1150 socket designed for the Intel® 4th
generation Core™ i7 / Core™ i5 / Core™ i3, Pentium® , Celeron® processors.
VANGUARD B85 CPU socket LGA1150
ASUS VANGUARD B85
1-3
Unplug all power cables before installing the CPU.
1.3.1
•
Upon purchase of the motherboard, ensure that the PnP cap is on the socket and
the socket contacts are not bent. Contact your retailer immediately if the PnP cap
is missing, or if you see any damage to the PnP cap/socket contacts/motherboard
components. ASUS will shoulder the cost of repair only if the damage is shipment/
transit-related.
•
Keep the cap after installing the motherboard. ASUS will process Return Merchandise
Authorization (RMA) requests only if the motherboard comes with the cap on the
LGA1150 socket.
•
The product warranty does not cover damage to the socket contacts resulting from
incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP
cap.
Installing the CPU
1
A
B
2
1-4
3
Chapter 1: Product introduction
4
5
C
A
B
1.3.2
CPU heatsink and fan assembly installation
Apply the Thermal Interface Material
to the CPU heatsink and CPU
before you install the heatsink and
fan if necessary.
ASUS VANGUARD B85
1-5
To install the CPU heatsink and fan assembly
1
2
A
B
B
A
3
4
To uninstall the CPU heatsink and fan assembly
1
2
A
B
B
A
1-6
Chapter 1: Product introduction
1.4
System memory
1.4.1
Overview
DIMM_B1
DIMM_B2
DIMM_A1
DIMM_A2
This motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Module
(DIMM) sockets. A DDR3 module has the same physical dimensions as a DDR2 DIMM but
is notched differently to prevent installation on a DDR2 DIMM socket. DDR3 modules are
developed for better performance with less power consumption. The figure illustrates the
location of the DDR3 DIMM sockets:
Channel
Channel A
Channel B
Sockets
DIMM_A1 & DIMM_A2
DIMM_B1 & DIMM_B2
VANGUARD B85 240-pin DDR3 DIMM sockets
1.4.2
Memory configurations
You may install 2GB, 4GB, and 8GB unbuffered non-ECC DDR3 DIMMs into the DIMM
sockets.
•
You may install varying memory sizes in Channel A and Channel B. The system maps
the total size of the lower-sized channel for the dual-channel configuration. Any excess
memory from the higher-sized channel is then mapped for single-channel operation.
•
Due to Intel® chipset limitation, DDR3 1600MHz and higher memory modules on XMP
mode will run at the maximum transfer rate of DDR3 1600MHz.
•
Always install DIMMs with the same CAS latency. For optimal compatibility, we
recommend that you install memory modules of the same version or date code (D/C)
from the same vendor. Check with the retailer to get the correct memory modules.
•
Due to the memory address limitation on 32-bit Windows® OS, when you install 4GB
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you do any of the
following:
-Install a 64-bit Windows® OS if you want to install 4GB or more on the
motherboard.
•
This motherboard does not support DIMMs made up of 512 megabits (Mb) chips or
less.
•
Memory modules with memory frequency higher than 2133 MHz and its corresponding
timing or the loaded X.M.P. Profile is not the JEDEC memory standard. The stability
and compatibility of these memory modules depend on the CPU’s capabilities and
other installed devices.
•
The maximum 32GB memory capacity can be supported with 8GB or above DIMMs.
ASUS will update the memory QVL once the DIMMs are available in the market.
-
Use a maximum of 3GB system memory if you are using a 32-bit Windows® OS.
ASUS VANGUARD B85
1-7
•
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value. To operate at the vendor-marked
or at a higher frequency, refer to section 2.5 Ai Tweaker menu for manual memory
frequency adjustment.
•
For system stability, use a more efficient memory cooling system to support a full
memory load (4 DIMMs) or overclocking condition.
•
Visit the ASUS website at: www.asus.com for the latest QVL.
VANGUARD B85 Motherboard Qualified Vendors Lists (QVL)
DDR3 2666 MHz capability
Vendors
Part No.
Apacer
Apacer
Apacer
78.BAGFF.AFC0C(XMP)
78.BAGFR.AFD0C(XMP)
78.CAGFF.AFD0C(XMP)
CORSAIR CMD16GX3M4A2666C10
(Ver4.13)(XMP)
CORSAIR CMD16GX3M4A2666C11
(Ver5.12)(XMP)
G.SKILL F3-2666C11Q-32GTXD(XMP)
G.SKILL F3-2666CL10Q16GBZHD(XMP)
GEIL
GOC332GB2666C11QC(XMP)
Team
TXD38G2666HC11CBK(XMP)
Size
SS/
DS
Chip
Chip
Brand No. Timing
Voltage
8GB ( 2x 4GB )
8GB ( 2x 4GB )
16GB ( 2x 8GB )
DS
DS
DS
-
-
12-13-13-35
12-13-13-35
12-13-13-35
-
DIMM socket support (Optional)
2 DIMMs
4 DIMMs
•
•
•
•
•
•
16GB ( 4x 4GB )
DS
-
-
10-12-12-31
1.65
•
•
16GB ( 4x 4GB )
DS
-
-
11-13-13-35
1.65
•
•
32GB ( 4x 8GB )
DS
-
-
11-13-13-35
1.65
•
•
16GB ( 4x 4GB )
DS
-
-
10-12-12-31
1.65
•
•
32GB ( 4x 8GB )
16GB ( 2x 8GB )
DS
DS
-
-
11-13-13-32
11-13-13-35
1.65
1.65
•
•
•
•
DDR3 2400 MHz capability
Vendors
Part No.
A-DATA
Apacer
AX3U2400GC4G10(XMP)
783BAGF3.AFD0C(XMP)
CORSAIR CMY16GX3M2A2400C10A
(Ver4.21)(XMP)
CORSAIR CMY16GX3M2A2400C10R
(Ver4.21)(XMP)
G.SKIIL
F3-2400C11Q-32GXM(XMP)
F3-19200CL9QG.SKILL
16GBZMD(XMP)
GEIL
GOC316GB2400C11QC(XMP)
KINGSTON KHX24C11T3K4/32X(XMP)
Patriot
PXD38G2400C11K(XMP)
Team
TXD38G2400HC10QBK(XMP)
Size
SS/ Chip Chip Timing
DS Brand No.
4GB
8GB ( 2x 4GB )
DS
DS
-
-
10-12-12-31
11-11-11-30
DIMM socket support
Voltage (Optional)
2 DIMMs
4 DIMMs
1.65
•
•
•
•
16GB ( 8x 2GB ) DS
-
-
10-12-12-31
1.65
•
•
16GB ( 2x 8GB ) DS
-
-
10-12-12-31
1.65
•
•
32GB ( 4x 8GB ) DS
-
-
11-13-13-31
1.65
•
•
16GB ( 4x 4GB ) DS
-
-
9-11-11-31
1.65
•
•
16GB ( 4x 4GB )
32GB ( 4x 8GB )
8GB ( 2x 4GB )
16GB ( 2x 8GB )
-
-
11-11-11-30
9-9-9-24
2400 11-11-11-30
10-12-12-31
1.65
1.65
1.65
1.65
•
•
•
•
•
•
•
•
DS
DS
DS
DS
DDR3 2133 MHz capability
Vendors
Part No.
Size
SS/
DS
Chip Chip Timing
Brand No.
A-DATA
Apacer
AX3U2133XW8G10(XMP)
AHU04GFB33CAQ3R(XMP)
CMD32GX3M4A2133C9
(Ver4.21)(XMP)
CMZ8GX3M2A2133C11R
(Ver4.21)(XMP)
F3-2133C10Q-32GSR(XMP)
F3-2133C11Q-32GZL(XMP)
KHX2133C11D3K4/
16GX(XMP)
KHX21C11T3FK8/64X(XMP)
PXD38G2133C11K(XMP)
TLD38G2133HC11ABK(XMP)
8GB
4GB
DS
DS
-
-
10-11-11-30
11-13-13-31
DIMM socket support
Voltage (Optional)
2 DIMMs
4 DIMMs
1.65
•
•
•
•
32GB ( 4x 8GB )
DS
-
-
9-11-11-31
1.65
•
•
8GB ( 2x 4GB )
DS
-
-
11-11-11-27
1.5
•
•
32GB ( 4x 8GB )
32GB ( 4x 8GB )
DS
DS
-
-
10-12-12-31
11-11-11-31
1.5
1.5
•
•
•
•
16GB ( 4x 4GB )
DS
-
-
11-12-11-30
1.65
•
•
64GB ( 8x 8GB )
8GB ( 2x 4GB )
16GB ( 2x 8GB )
DS
DS
DS
-
-
9-9-9-24
1.5
2133 11-11-11-27 1.5
11-11-11-31
1.65
•
•
•
•
•
•
CORSAIR
CORSAIR
G.SKILL
G.SKILL
KINGSTON
KINGSTON
Patriot
Team
1-8
Chapter 1: Product introduction
DDR3 1866 MHz capability
A-DATA
16GB ( 2x 8GB ) DS
-
-
10-11-10-30
DIMM socket
Voltage support (Optional)
2 DIMMs 4 DIMMs
1.5
•
•
CORSAIR
16GB ( 2x 8GB ) DS
-
-
9-10-9-27
1.5
•
•
8GB ( 2x 4GB )
DS
-
-
9-10-9-27
1.5
•
•
8GB ( 2x 4GB )
DS
-
-
9-10-9-27
1.5
•
32GB ( 4x 8GB ) DS
-
-
10-11-10-30
1.5
•
•
16GB ( 4x 4GB )
8GB ( 2x 4GB )
8GB ( 2x 4GB )
8GB
16GB ( 2x 8GB )
Hynix
-
H5TQ4G83AFR
-
9-10-9-28
1866 9-10-9-27
13-13-13-32
10-11-10-30
1.5
1.65
1.5
1.5
1.5
•
•
•
•
•
•
•
•
•
•
Vendors
Part No.
AX3U1866XW8G10(XMP)
CMY16GX3M2A1866C9 (Ver
4.21)(XMP)
CMY8GX3M2A1866C9
CORSAIR
(Ver3.24)(XMP)
CORSAIR
CMZ8GX3M2A1866C9(XMP)
F3-14900CL10QG.SKILL
32GBZL(XMP)
G.SKILL
F3-14900CL9Q-16GBZL(XMP)
KINGSTON KHX1866C9D3K2/8GX(XMP)
Patriot
PXD38G1866ELK(XMP)
Team
TED38GM1866C13BK
Team
TLD38G1866HC10SBK(XMP)
SS/ Chip Chip No.
DS Brand
Size
DS
DS
DS
DS
DS
Timing
DDR3 1600 MHz capability
DIMM socket
Voltage support (Optional)
2 DIMMs 4 DIMMs
Vendors
Part No.
Size
SS/
DS
Chip
Brand
Chip No.
Timing
A-DATA
AD3U1600C2G11
2GB
SS
D9PFJ
11-11-11-28 -
•
•
A-DATA
AD3U1600C4G11
4GB
DS
D9PFJ
11-11-11-28 -
•
•
A-DATA
AD3U1600W4G11
4GB
SS
MIC
RON
MIC
RON
A-D
11-11-11-28 -
•
•
A-DATA
AD3U1600W8G11
8GB
DS
3WCD-1211A
11-11-11-28 -
•
•
A-DATA
A-DATA
A-DATA
AMD
AMD
AMD
AX3U1600GW8G9(XMP)
AX3U1600W8G11
AXDU1600GW8G9B(XMP)
AE32G1609U1-U
AE34G1609U2-U
AP38G1608U2K(XMP)
16GB(2x 8GB )
16GB(2x 8GB )
16GB(2x 8GB )
2GB
4GB
8GB(2x 4GB )
DS
DS
DS
SS
DS
DS
1.5
1.5
1.65
1.5
1.5
1.65
•
•
•
•
•
•
•
•
•
•
•
•
78.B1GE3.9L10C
4GB
DS
-
1.65
Apacer
78.B1GET.9K00C
4GB
SS
Apacer
78.C1GET.9K10C
8GB
DS
Apacer
Apacer
Apacer
Asint
Asint
Asint
Asint
Asint
Asint
Asint
AVEXIR
AHU04GFA60C9Q1D(XMP)
AHU04GFA60C9Q3R(XMP)
AHU08GFA60CBT3R(XMP)
SLA302G08-EGG1C(XMP)
SLA302G08-EGJ1C(XMP)
SLA302G08-EGN1C
SLA304G08-ENG1B
SLB304G08-EGJ1B(XMP)
SLB304G08-EGN1B
SLZ302G08-EGN1C
AVD3U16000904G-2CW(XMP)
CMD16GX3M2A1600C9
(Ver8.21)(XMP)
CMD8GX3M2A1600C8
(Ver5.12)(XMP)
CMD8GX3M2A1600C9
(Ver2.12)(XMP)
CML16GX3M2A1600C10
(Ver2.21)(XMP)
CML16GX3M4X1600C8
(Ver 2.12)(XMP)
CML8GX3M2A1600C9
(Ver7.12)(XMP)
CMV8GX3M1A1600C11
CMX8GX3M2A1600C9
(Ver3.19)(XMP)
CMZ16GX3M2A1600C10
(Ver.3.24)(XMP)
CMZ16GX3M4A1600C9(XMP)
4GB
4GB
8GB
4GB
4GB
4GB
4GB
8GB
8GB
2GB
8GB(2x 4GB )
DS
DS
DS
DS
DS
DS
SS
DS
DS
SS
DS
23EY4587MB6H
23EY4587MB6H
AM5D5908D
EQSCK
AM5D6008B
QQSCK
AM5D6008B
QQSCK
302G08-GG1C
302G08-GJ1C
302G08-GN1C
304G08-GN1B
304G08-GN1B
302G08-GN1C
-
9-9-9-24
9-11-9-27
9-11-9-27
9-9-9-28
Apacer
ATA
A-D
ATA
AMD
AMD
Apa
cer
Apa
cer
Apa
cer
Asint
Asint
ASint
Asint
ASint
ASint
-
3WCD-1211A
16GB(2x 8GB )
DS
-
8GB(2x 4GB )
DS
-
8GB(2x 4GB )
DS
16GB(2x 8GB )
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
•
•
11-11-11-28 -
•
•
11-11-11-31 -
•
•
9-9-9-27
11-11-11-28
9-9-9-24
9-9-9-27
9-9-9-27
9-11-11-28
9-9-9-27
11-11-11-28
1.65
1.5
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
-
9-9-9-24
1.5
•
-
1600 8-88-24
1.5
•
•
-
-
9-9-9-24
1.5
•
•
DS
-
-
10-10-10-27 1.5
•
•
16GB(4x 4GB )
DS
-
-
Heat-Sink
Package
1.5
•
•
8GB(2x 4GB )
DS
-
-
9-9-9- 24
1.5
•
•
8GB
DS
-
-
11-11-11-30 -
•
•
8GB(2x 4GB )
SS
-
-
9-9-9-24
•
•
16GB(2x 8GB )
DS
-
-
10-10-10-27 1.5
•
•
16GB(4x 4GB )
DS
-
-
9-9-9-24
•
•
1.65
1.5
continued on the next page
ASUS VANGUARD B85
1-9
DDR3 1600 MHz capability
Chip No.
Timing
32GB ( 4x 8GB ) DS
-
-
10-10-10-27 1.5
•
4GB ( 1x 4GB )
DS
-
-
9-9-9-24
1.5
•
8GB ( 1x 8GB )
DS
-
-
10-10-10-27 1.5
•
8GB ( 1x 8GB )
DS
-
-
10-10-10-27 1.5
•
8GB ( 2x 4GB )
DS
-
-
8-8-8-24
1.5
•
8GB ( 2x 4GB )
DS
-
-
9-9-9-24
1.5
•
8GB ( 2x 4GB )
DS
-
-
9-9-9-24
1.5
•
4GB
DS
-
-
8-8-8-24
1.5
•
•
M2X2G64CB88G7N-DG(XMP)
2GB
SS
Elixir
9-9-9-28
-
•
•
Elixir
M2X4G64CB8HG5N-DG(XMP)
4GB
DS
Elixir
9-9-9-28
-
•
•
G.SKILL
G.SKILL
G.Skill
G.SKILL
GEIL
GEIL
Hynix
Hynix
F3-12800CL9D-8GBSR2(XMP)
F3-12800CL9Q-16GBXL(XMP)
F3-12800CL9Q-16GBZL(XMP)
F3-1600C9Q-32GXM(XMP)
GUP34GB1600C7DC(XMP)
GVP38GB1600C8QC(XMP)
HMT351U6CFR8C-PB
HMT41GU6MFR8C-PB
8GB ( 2x 4GB )
16GB ( 4x 4GB )
16GB ( 4x 4GB )
32GB ( 4x 8GB )
4GB ( 2x 2GB )
8GB ( 4x 2GB )
4GB
8GB
DS
DS
DS
DS
DS
DS
DS
DS
9-9-9-24
9-9-9-24
9-9-9-24
7-7-7-24
8-8-8-28
-
1.25
1.5
1.5
1.5
1.6
1.6
-
•
•
•
•
•
•
•
•
•
•
•
•
•
KINGMAX
FLGE85F-C8KL9A(XMP)
2GB
SS
N/A
9-9-9-28
-
•
•
KINGMAX
FLGF65F-C8KL9A(XMP)
4GB
DS
N/A
9-9-9-28
-
•
•
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KHX16009CD3K2/8GX(XMP)
KHX1600C9D3B1/4G(XMP)
KHX1600C9D3K3/12GX(XMP)
KHX1600C9D3K3/6GX(XMP)
KHX1600C9D3K3/6GX(XMP)
KHX1600C9D3K4/16GX(XMP)
KHX1600C9D3K6/24GX(XMP)
KHX1600C9D3K8/32GX(XMP)
KHX1600C9D3LK2/8GX(XMP)
KHX1600C9D3P1K2/8G
KHX16C10B1K2/16X(XMP)
8GB ( 2x 4GB )
4GB
12GB ( 3x 4GB )
6GB ( 3x 2GB )
6GB ( 3x 2GB )
16GB ( 4x 4GB )
24GB ( 6x 4GB )
32GB ( 8x 4GB )
8GB ( 2x 4GB )
8GB ( 2x 4GB )
16GB ( 2x 8GB )
DS
SS
DS
DS
DS
DS
DS
DS
DS
DS
DS
Hynix
Hynix
KING
MAX
KING
MAX
-
N2CB2G80
GN-DG
N2CB2G8
0GN-DG
H5TQ2G83CFR
H5TQ4G83MFR
-
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.35
1.5
1.5
•
•
•
•
•
•
•
•
•
•
•
•
•
KINGSTON
KHX16C9K2/16
16GB ( 2x 8GB ) DS
-
1.5
•
•
KINGSTON
KHX16C9P1K2/16
16GB ( 2x 8GB ) DS
1.5
•
•
KINGSTON
KVR16N11/4
4GB
DS
-
•
•
KINGSTON
KVR16N11/4
4G
DS
-
1.5
•
•
MICRON
MT16JTF1G64AZ-1G6D1
8GB
DS
-
1.5
•
•
Micron
MT16JTF1G64AZ-1G6E1
8GB
DS
-
-
•
•
MICRON
MT16KTF51264AZ-1G6M1
4GB
DS
11-11-11-28 -
•
MICRON
MT16KTF51264AZ-1G6M1
4GB
DS
-
-
•
•
Micron
MT8JTF51264AZ-1G6E1
4GB
SS
-
-
•
•
MICRON
MT8KTF25664AZ-1G6M1
2GB
SS
-
-
•
•
Patriot
Patriot
Patriot
Patriot
Patriot
Patriot
Patriot
Patriot
Patriot
PGD316G1600ELK(XMP)
PGD316G1600ELK(XMP)
PGD38G1600ELK(XMP)
PGD38G1600ELK(XMP)
PV316G160C9QKRD(XMP)
PV38G160C9KRD(XMP)
PVV38G1600LLK(XMP)
PX538G1600LLK(XMP)
PX7312G1600LLK(XMP)
16GB ( 2x 8GB )
16GB ( 2x 8GB )
8GB ( 2x 4GB )
8GB ( 2x 4GB )
16GB ( 4x 4GB )
8GB ( 2x 4GB )
8GB ( 2x 4GB )
8GB ( 2x 4GB )
12GB ( 3x 4GB )
DS
DS
DS
DS
DS
DS
DS
DS
DS
KINGS D2568JPU
TON
CPGGBU
Hynix H5TQ2G83
CFRPBC
MIC
D9PBC
RON
Micron D9QBJ
MIC
D9PFJ
RON
MIC
D9PFJ
RON
Micron D9QBJ
MICR D9PFJ
ON
-
9-9-9-27
9-9-9-27
9
9
9
9-9-9-24
9
9-9-9-27
9-9-9-24
9
1333-99-9-24
11-11-11
-28-1
1.65
1.5
1.65
1.5
1.5
1.5
1.65
1.65
1.65
•
•
•
•
•
•
•
•
•
•
Patriot
PXD38G1600LLK(XMP)
8GB ( 2x 4GB )
DS
-
-
1.65
•
•
PSC
PSC
AL9F8L93B-GN2E
ALAF8L93B-GN2E
4GB
8GB
SS
DS
PSC
PSC
A3P4GF3BLF
A3P4GF3BLF
9-9-9-24
9-9-9-24
9-9-9-24
9-9-9-24
9-9-9-24
8-9-8-24
8-9-8-24
8-9-8-24
1600 89-8-24
-
-
•
•
•
•
Part No.
Size
CORSAIR
Crucial
CMZ32GX3M4X1600C10
(Ver2.2)(XMP)
CMZ4GX3M1A1600C9 (
Ver8.16)(XMP)
CMZ8GX3M1A1600C10
(Ver3.23)(XMP)
CMZ8GX3M1A1600C10
(Ver8.21)(XMP)
CMZ8GX3M2A1600C8(XMP)
CMZ8GX3M2A1600C9
(Ver8.16)(XMP)
CMZ8GX3M2A1600C9(XMP)
BLT4G3D1608DT1
TX0.16FM(XMP)
Elixir
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
SS/
DS
DIMM socket
Voltage support (Optional)
2 DIMMs 4 DIMMs
Chip
Brand
Vendors
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
continued on the next page
1-10
Chapter 1: Product introduction
DDR3 1600 MHz capability
Vendors
Part No.
Size
SS/
DS
Chip
Brand
Chip No.
Timing
SanMax
SMD-4G68HP-16KZ
4GB
DS
Hynix
-
1.5
•
•
SanMax
SMD-4G68NG-16KK
4GB
DS
-
-
•
•
Silicon Power SP002GBLTU160V02(XMP)
2GB
SS
20YT5NG
9-11-11-28
1.5
•
•
Silicon Power SP004GBLTU160V02(XMP)
4GB
DS
20YT5NG
9-9-9-24
1.5
•
•
Team
Team
Team
Team
Team
TED34GM1600C11BK
TED38G1600HC11BK
TED38GM1600C11BK
TLD34G1600HC9BK(XMP)
TLD38G1600HC9BK(XMP)
4GB
8GB
8GB
8GB ( 2x 4GB )
16GB ( 2x 8GB )
DS
DS
DS
DS
DS
ELP
IDA
S-PO
WER
S-PO
WER
Hynix
Hynix
-
H5TQ2G83B
FRPBC
J2108BDBG
-GN-F
DIMM socket
Voltage support (Optional)
2 DIMMs 4 DIMMs
11-11-11-28
11-11-11-28
11-11-11-28
9-9-9-24
9-9-9-24
1.5
1.5
1.5
1.5
•
•
•
•
•
•
Team
TXD34096M1600HC9-D(XMP)
4GB
DS
Hynix
9-9-9-24
1.5
•
•
Transcend
JM1600KLH-8G(626633)
8GB
DS
TK963EBF3
-
-
•
•
Transcend
TS1GLK64V6H(620945)
8GB
DS
K4B4G0846B
-
-
•
•
Transcend
TS1GLK64W6H
8GB
DS
K4B4G0846B
•
•
TS512MLK64W6H
4GB
SS
11-11-1128-1
11-11-1128-2
-
Transcend
Trans
cend
SAMS
UNG
SAMS
UNG
SAMS
UNG
H5TC2G83EFR
H5TQ4G83AFR
H5TC2G83
BFRH9A
-
•
•
K4B4G0846B
•
•
•
DDR3 1333 MHz capability
Vendors
Part No.
Size
SS/ Chip Brand
DS
Chip No.
AMD
AMD
Apacer
Asint
Asint
Asint
Asint
BUFFALO
BUFFALO
BUFFALO
CORSAIR
AE32G1339U1-U
AE34G1339U2-U
78.B1GDE.9L10C
SLA302G08-EDJ1C
SLA304G08-EDJ1B
SLB304G08-EDJ1B
SLZ302G08-EDJ1C
D3U1333-1G
D3U1333-2G
D3U1333-4G
CMV8GX3M1A1333C9
SS
DS
DS
SS
SS
DS
DS
SS
DS
DS
DS
AMD
AMD
Apacer
ASint
Asint
Asint
ASint
Elpida
Elpida
NANYA
-
23EY4587MB3H
23EY4587MB3H
AM5D5908CEHSBG
302G08-DJ1C
304G08-DJ1B
304G08-DJ1B
302G08-DJ1C
J1108BFBG-DJ-F
J1108BFBG-DJ-F
NT5CB256M8BN-CG
-
CORSAIR
CMV8GX3M2A1333C9
DS
-
N/A
9-9-9-24
-
•
•
CORSAIR
DS
-
-
9-9-9-24
1.5
•
•
DS
-
-
9-9-9-24
1.5
•
DS
-
-
9-9-9-24
1.5
•
8GB
DS
-
-
9-9-9-24
1.5
•
-
-
9-9-9-24
1.5
•
SS
DS
Elxir
ELPIDA
N2CB2G80GN-CG
J2108BCSE-DJ-F
-
-
•
•
G.SKILL
F3-10666CL9D-8GBXL
DS
-
-
9-9-9-24
1.5
•
•
GEIL
GG34GB1333C9DC
DS
GEIL
GL1L128M88BA15B
9-9-9-24
1.3
•
•
GEIL
GVP34GB1333C9DC
DS
-
-
9-9-9-24
1.5
•
•
GEIL
GVP38GB1333C7QC
DS
-
-
7-7-7-24
1.5
GEIL
GVP38GB1333C9DC
DS
-
-
9-9-9-24
1.5
•
•
INNODISK
INNODISK
KINGMAX
KINGMAX
KINGMAX
KINGMAX
KINGSTON
KINGSTON
M3UN-2GHJBC09
M3UN-4GHJAC09
FLFE85F-C8KL9
FLFE85F-C8KL9
FLFF65F-C8KL9
FLFF65F-C8KL9
KVR1333D3E9S/4G
KVR1333D3N9H/4G
8GB
(2x 4GB)
2GB
4GB
8GB
(2x 4GB)
4GB
(2x 2GB)
4GB
(2x 2GB)
8GB
(4x 2GB)
8GB
(2x 4GB)
2GB
4GB
2GB
2GB
4GB
4GB
4GB
4GB
DS
Elixir
ELPIDA
CMX16GX3M2A133
3C9 (Ver3.24)
CMX4GX3M1A1333
C9 (Ver2.12)
CMX4GX3M1A1333
C9 (Ver5.11)
CMX8GX3M1A133
3C9 (Ver2.2)
CMX8GX3M2A133
3C9(XMP)
M2F2G64CB88G7N-CG
EBJ41UF8BCF0-DJ-F
2GB
4GB
4GB
2GB
4GB
8GB
4GB
1GB
2GB
4GB
8GB
8GB
(2x 4GB)
16GB
(2x 8GB)
4GB
(1x 4GB)
4GB
(1x 4GB)
DIMM socket
Voltage support (Optional)
2 DIMMs 4 DIMMs
1.5
•
•
1.5
•
•
9
•
•
•
•
9-10-10-26 •
•
9-9-9-24
•
•
•
•
•
•
•
•
•
•
9-9-9-24
•
•
SS
DS
SS
SS
DS
DS
DS
DS
Hynix
Hynix
KINGMAX
KINGMAX
KINGMAX
KINGMAX
Elpida
ELPIDA
H5TQ2G83CFRH9C
H5TQ2G83CFRH9C
KFC8FNLBF-GXX-12A
KFC8FNLXF-DXX-15A
KFC8FNLBF-GXX-12A
KFC8FNLXF-DXX-15A
J2108ECSE-DJ-F
J2108BDBG-GN-F
9-9-9-24
9-9-9-24
9
-
1.5
1.5
•
•
•
•
•
•
•
•
•
•
•
•
CORSAIR
CORSAIR
CORSAIR
CORSAIR
Timing
•
•
•
•
•
continued on the next page
ASUS VANGUARD B85
1-11
DDR3 1333 MHz capability
Vendors
Part No.
KINGSTON
KINGSTON
KVR1333D3N9H/8G
KVR13N9S8H/4
Mach Xtreme
Mach Xtreme
MICRON
MICRON
Patriot
Patriot
RiDATA
RiDATA
Silicon Power
Silicon Power
Silicon Power
Team
Team
Team
Team
Transcend
Transcend
Size
8GB
4GB
16GB
MXD3U133316GQ
(4x 4GB)
MXD3V13332GS
2GB
MT16JTF1G64AZ-1G4D1 8GB
MT8JTF25664AZ-1G4M1 2GB
PG38G1333EL(XMP)
8GB
PGD316G1333ELK(XMP) 16GB
(2x 8GB)
C304627CB1AG22Fe
2GB
E304459CB1AG32Cf
4GB
SP001GBLTU133S02
1GB
SP002GBLTU133V02
2GB
SP004GBLTU133V02
4GB
TED34096M1333HC9
4GB
TED34GM1333C9BK
4GB
TED38G1333HC9BK
8GB
TED38GM1333C9BK
8GB
JM1333KLH-8G(623654) 8GB
TS1GLK64V3H(620053)
8GB
SS/ Chip Brand
DS
Chip NO.
Timing
DS
SS
ELPIDA
ELPIDA
J4208EASE-DJ-F
J4208BBBG-GN-F
9-9-9-24
-
DIMM socket
Voltage support (Optional)
2 DIMMs 4 DIMMs
1.5
•
•
1.5
•
•
DS
-
-
-
-
•
•
SS
DS
SS
DS
Mach Xtreme
MICRON
MICRON
-
C2S46D30-D313
D9PCP
D9PFJ
-
-
1.5
•
•
•
•
•
DS
-
-
9-9-9-24
1.5
•
•
DS
DS
SS
SS
DS
DS
DS
DS
DS
DS
DS
RiDATA
RiDATA
S-POWER
S-POWER
S-POWER
Team
Hynix
Hynix
Transcend
MICRON
C304627CB1AG22Fe
E304459CB1AG32Cf
10YT3E5
20YT3NG
20YT3NG
T3D2568LT-13
H5TQ2GB83CFR
H5TQ4G83AFR
TK963EBF3
D9QBJ
9
9
9
9-9-9-24
9-9-9-24
9-9-9-24
9-9-9-24
9-9-9-24
-
1.5
1.5
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Side(s): SS - Single-sided DS - Double-sided
DIMM support:
•
2 DIMMs: Supports one pair of modules inserted into either the beige slots or the
brown slots as one pair of Dual-channel memory configuration.
•
4 DIMMs: Supports four (4) modules inserted into both the beige and brown slots as
two pairs of Dual-channel memory configuration.
Visit the ASUS website at www.asus.com for the latest QVL.
1-12
Chapter 1: Product introduction
1.4.3
Installing a DIMM
Unplug the power supply before adding or removing DIMMs or other system components.
Failure to do so can cause severe damage to both the motherboard and the components.
1.
Press the retaining clips outward
to unlock a DIMM socket.
2.
2
DIMM notch
Align a DIMM on the socket
such that the notch on the DIMM
matches the DIMM slot key on the
socket.
1
Unlocked
retaining clip
DIMM slot key
A DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into
a socket in the wrong direction to avoid damaging the DIMM.
3.
3
Firmly insert the DIMM into the socket
until the retaining clips snap back
in place and the DIMM is properly
seated.
Locked Retaining Clip
1.4.4
Removing a DIMM
To remove a DIMM:
1.
Simultaneously press the retaining clips outward to unlock the DIMM.
Support the DIMM lightly with
your fingers when pressing the
retaining clips. The DIMM might
get damaged when it flips out
with extra force.
2.
2
1
Remove the DIMM from the socket.
DIMM notch
ASUS VANGUARD B85
1-13
1.5
Expansion slots
Unplug the power cord before adding or removing expansion cards. Failure to do so may
cause you physical injury and damage motherboard components.
PCIEX16_1
PCIEX1_1
PCI1
PCIEX16_2
1-14
Slot No.
Slot Description
1
PCIe 3.0/2.0 x16_1 slot
2
PCIe 2.0 x1_1 slot
3
PCI x1 slot
4
PCIe 2.0 x16_1 slot
Chapter 1: Product introduction
IRQ assignments for this motherboard
SATA Controller 0
SATA Controller 1
SMBUS Controller
Thermal Controller
USB2.0 Controller 0
USB2.0 Controller 1
PCIe x16_1
PCIe x16_2
PCIe x1_1
PCI1
Intel LAN
ASUS VANGUARD B85
A
B
C
D
E
F
G
H
–
–
–
shared
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
shared
–
–
–
shared
–
–
–
shared
–
–
–
–
shared
–
–
–
–
–
–
–
shared
–
–
–
–
shared
–
–
–
–
shared
–
–
–
–
shared
–
–
–
–
–
shared
–
–
–
–
–
–
–
shared
–
–
–
–
–
1-15
1.6
1.
Jumpers
Clear RTC RAM (3-pin CLRTC)
This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can
clear the CMOS memory of date, time, and system setup parameters by erasing
the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in
CMOS, which include system setup information such as system passwords.
1
2
CLRTC
Normal
(Default)
2
3
Clear RTC
VANGUARD B85 Clear RTC RAM
To erase the RTC RAM:
1.
Turn OFF the computer and unplug the power cord.
2.
Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3
for about 5-10 seconds, then move the cap back to pins 1-2.
3.
Plug the power cord and turn ON the computer.
4.
Hold down the <Del> key during the boot process and enter BIOS setup to reenter data.
Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default
position. Removing the cap will cause system boot failure!
1-16
•
If the steps above do not help, remove the onboard battery and move the jumper
again to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the
battery.
•
You do not need to clear the RTC when the system hangs due to overclocking. For
system failure due to overclocking, use the CPU Parameter Recall (C.P.R.) feature.
Shut down and reboot the system, then the BIOS automatically resets parameter
settings to default values.
Chapter 1: Product introduction
1.7
Connectors
1.7.1
Rear panel connectors
1
2
3
15
14
13
4
12
11
5 6 7 8
10
9
1.
PS/2 keyboard/mouse combo port. This port is for a PS/2 keyboard or mouse.
2.
DisplayPort. This port is for a DisplayPort-compatible devices.
3.
Video Graphics Adapter (VGA) port. This 15-pin port is for a VGA monitor or other
VGA-compatible devices.
4.
LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN)
through a network hub.
LAN port LED indications
Activity/Link LED
Status
Description
Off
No link
Orange
Linked
Orange
Data activity
(Blinking)
Orange
Ready to wake
(Blinking then up from S5
steady)
mode
Speed LED
Status
Description
OFF
10Mbps connection
ORANGE 100Mbps connection
GREEN 1Gbps connection
Activity Link
LED
Speed
LED
LAN port
5.
Center / Subwoofer port (orange). This port connects the center/subwoofer speakers.
6.
Rear Speaker Out port (black). This port connects the rear speakers in a 4.1 channel,
5.1 channel, or 7.1 channel audio configuration.
7.
Line In port (light blue). This port connects to the tape, CD, DVD player, or other
audio sources.
8.
Line Out port (lime). This port connects to a headphone or a speaker. In the 4.1, 5.1,
and 7.1 channel configurations, the function of this port becomes Front Speaker Out.
9.
Microphone port (pink). This port connects to a microphone.
10. Side Speaker Out port (gray). This port connects the side speaker in an 8-channel
audio configuration.
ASUS VANGUARD B85
1-17
Refer to the audio configuration table for the function of the audio ports in 2.1, 4.1, 5.1, or
7.1 channel configuration.
Audio 2, 4, 6, or 8-channel configuration
Port
Headset
2.1 channel
Line In
Line Out
Mic In
-
Light Blue
Lime
Pink
Orange
Black
Gray
11.
4.1 channel
5.1 channel
7.1 channel
Line in
Front Speaker Out
Mic In
Rear Speaker Out
-
Line in
Front Speaker Out
Mic in
Center/Subwoofer
Rear Speaker Out
-
Line in
Front Speaker Out
Mic in
Center/Subwoofer
Rear Speaker Out
Side Speaker Out
USB 3.0 ports 5 and E2. These two 9-pin Universal Serial Bus (USB) ports are for
USB 3.0 devices.
12. USB 3.0 ports E3 and E4. These two 9-pin Universal Serial Bus (USB) ports are for
USB 3.0 devices.
•
DO NOT connect a keyboard / mouse to any USB 3.0 port when installing Windows®
operating system.
•
Due to USB 3.0 controller limitations, USB 3.0 devices can only be used under a
Windows® OS environment and after USB 3.0 driver installation.
•
USB 3.0 devices can only be used for data storage.
•
We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster
and better performance from your USB 3.0 devices.
13. DVI-D port. This port is for any DVI-D compatible device. DVI-D can’t be converted to
output RGB Signal to CRT and is not compatible with DVI-I.
14. HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector,
and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected
content.
Intel display architecture design supports the following maximum supported pixel clocks
(Pixel Clock = H total x V Total x Frame Rate (Screen refresh rate)):
-
DisplayPort port: 553 MHz
-
HDMI port: 300 MHz
-
DVI port: 165 MHz
-
VGA port: 180 MHz
15. USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are for USB
2.0/1.1 devices.
1-18
Chapter 1: Product introduction
1.7.2
1. Internal connectors
ATX power connectors (24-pin EATXPWR, 8-pin EATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
EATX12V
+12V DC
+12V DC
+12V DC
PIN 1
+12V DC
EATXPWR
GND
+3 Volts
GND
+12 Volts
GND
+12 Volts
GND +5V Standby
Power OK
GND
+5 Volts
GND
+5 Volts
GND
+3 Volts
+3 Volts
PIN 1
GND
+5 Volts
+5 Volts
+5 Volts
-5 Volts
GND
GND
GND
PSON#
GND
-12 Volts
+3 Volts
VANGUARD B85 ATX power connectors
2.
•
We recommend that you use an ATX 12V Specification 2.0‑compliant power supply
unit (PSU) with a minimum of 300W power rating. This PSU type has 24-pin and 4-pin
power plugs.
•
DO NOT forget to connect the 4-pin/8-pin ATX +12V power plug. Otherwise, the
system will not boot up.
•
We recommend that you use a PSU with higher power output when configuring a
system with more power-consuming devices or when you intend to install additional
devices. The system may become unstable or may not boot up if the power is
inadequate.
•
If you are uncertain about the minimum power supply requirement for your system,
refer to the Recommended Power Supply Wattage Calculator at http://support.asus.
com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.
Digital audio connector (4-1 pin SPDIF_OUT)
SPDIFOUT
GND
+5V
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect
the S/PDIF Out module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
SPDIF_OUT
VANGUARD B85 Digital audio connector
ASUS VANGUARD B85
1-19
3.
Front panel audio connector (10-1 pin AAFP)
NC
AGND
NC
NC
PIN 1
MIC2
MICPWR
Line out_R
NC
Line out_L
PIN 1
PORT1 L
PORT1 R
PORT2 R
SENSE_SEND
PORT2 L
AAFP
SENSE2_RETUR
AGND
NC
SENSE1_RETUR
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
HD-audio-compliant
pin definition
Legacy AC’97
compliant definition
VANGUARD B85 Front panel audio connector
4.
•
We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard’s high-definition audio capability.
•
If you want to connect a high-definition front panel audio module to this connector,
set the Front Panel Type item in the BIOS setup to [HD]. If you want to connect an
AC’97 front panel audio module to this connector, set the item to [AC97]. By default,
this connector is set to [HD]. See section 2.6.8 Onboard Devices Configuration for
details.
TPM connector (20-1 pin TPM)
This connector supports a Trusted Platform Module (TPM) system, which can securely
store keys, digital certificates, passwords, and data. A TPM system also helps enhance
network security, protects digital identities, and ensures platform integrity.
SB_SUS_STAT
GND
+3VSB
SMBSCL
LAD0
+3V
LAD3
PCIRST#
FRAME
PCICLK
TPM
GND
RESET
GPIO
SERIRQ
SMBSDA
GND
LAD1
LAD2
PWROWN
PIN 1
VANGUARD B85 TPM connector
The TPM module is purchased separately.
1-20
Chapter 1: Product introduction
5. CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN1~4)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
CPU_FAN
B
GND
CPU FAN PWR
CPU FAN IN
CPU FAN PWM
A
A
CHA_FAN3
C
GND
CHA FAN PWR
CHA FAN IN
+5V
CHA_FAN2
GND
CHA FAN PWR
CHA FAN IN
+5V
B
C
D
CHA_FAN4
E
CHA_FAN1
+5V
CHA FAN IN
CHA FAN PWR
GND
E
VANGUARD B85
+5V
CHA FAN IN
CHA FAN PWR
GND
D
VANGUARD B85 Fan connectors
•
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow
inside the system may damage the motherboard components. These are not jumpers!
Do not place jumper caps on the fan connectors!
•
Ensure that the CPU FAN cable is securely installed to the CPU fan connector.
ASUS VANGUARD B85
1-21
6.
Chassis intrusion jumper (4-1 pin CHASSIS)
This jumper is for a chassis-mounted intrusion detection sensor or switch. Connect one
end of the chassis intrusion sensor or switch cable to this jumper. The chassis intrusion
sensor or switch sends a high-level signal to this connector when a chassis component
is removed or replaced. The signal is then generated as a chassis intrusion event.
By default, the pin labeled “Chassis Signal” and “Ground” are shorted with a jumper
cap. Remove the jumper caps only when you intend to use the chassis intrusion
detection feature.
Chassis Signal
GND
+5VSB_MB
CHASSIS
VANGUARD B85
PIN 1
VANGUARD B85 Chassis intrusion connector
7.
Intel® B85 Serial ATA 6.0Gb/s connector (7-pin SATA6G_1~4 [brown])
This connector connects to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s
signal cables.
SATA6G_1
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXN1
RSATA_RXP1
GND
SATA6G_2
GND
RSATA_TXP3
RSATA_TXN3
GND
RSATA_RXN3
RSATA_RXP3
GND
SATA6G_3
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXN2
RSATA_RXP2
GND
GND
RSATA_RXP4
RSATA_RXN4
GND
RSATA_TXN4
RSATA_TXP4
GND
SATA6G_4
VANGUARD B85 SATA 6.0Gb/s connectors
When using hot-plug and NCQ, set the SATA Mode Selection item in the BIOS to [AHCI].
See section 2.6.3 SATA Configuration for details.
1-22
Chapter 1: Product introduction
8.
Intel® B85 Serial ATA 3.0Gb/s connectors (7-pin SATA3G_5~6 [black])
These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical drives via
Serial ATA 3.0 Gb/s signal cables.
SATA3G_5
GND
RSATA_TXP5
RSATA_TXN5
GND
RSATA_RXN5
RSATA_RXP5
GND
SATA3G_6
VANGUARD B85
GND
RSATA_TXP6
RSATA_TXN6
GND
RSATA_RXN6
RSATA_RXP6
GND
VANGUARD B85 SATA 3.0Gb/s connectors
When using hot-plug and NCQ, set the SATA Mode Selection item in the BIOS to [AHCI].
See section 2.6.3 SATA Configuration for details.
ASUS VANGUARD B85
1-23
9.
Serial port connector (10-1 pin COM)
This connector is for a serial (COM) port. Connect the serial port module cable to this
connector, then install the module to a slot opening at the back of the system chassis.
PIN 1
DC D
TXD
GND
RTS
RI
RX D
DT R
DS R
CTS
COM
VANGUARD B85
VANGUARD B85 Serial port connector
The COM module is purchased separately.
10. USB 3.0 connector (20-1 pin USB3_12)
This connector allows you to connect a USB 3.0 module for additional USB 3.0 front
or rear panel ports. With an installed USB 3.0 module, you can enjoy all the benefits of
USB 3.0 including faster data transfer speeds of up to 5Gbps, faster charging time for
USB-chargeable devices, optimized power efficiency, and backward compatibility with
USB 2.0.
USB3_12
PIN 1
VANGUARD B85
USB3+5V
IntA_P2_SSRXIntA_P2_SSRX+
GND
IntA_P2_SSTXIntA_P2_SSTX+
GND
IntA_P2_DIntA_P2_D+
USB3+5V
IntA_P1_SSRXIntA_P1_SSRX+
IntA_P1_SSTXGND
IntA_P1_SSTX+
GND
IntA_P1_DIntA_P1_D+
GND
VANGUARD B85 USB3.0 Front panel connector
The USB 3.0 module is purchased separately.
1-24
Chapter 1: Product introduction
11.
System panel connector (20-8 pin PANEL)
This connector supports several chassis-mounted functions.
PANEL
SPEAKER
+5V
Ground
Ground
Speaker
PWR_LED-
PWR_LED+
+PWR_LED
VANGUARD B85
+HDD_LED
PWRSW
Reset
Ground
PWR
Ground
HDD_LED+
HDD_LED-
PIN 1
RESET
* Requires an ATX power supply
VANGUARD B85 System panel connector
•
System power LED (2-pin PWR_LED)
This 2-pin connector is for the system power LED. Connect the chassis power LED
cable to this connector. The system power LED lights up when you turn on the system
power, and blinks when the system is in sleep mode.
•
Hard disk drive activity LED (2-pin HDD_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable
to this connector. The HDD LED lights up or flashes when data is read from or written
to the HDD.
•
System warning speaker (4-pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.
•
ATX power button/soft-off button (2-pin PWRSW)
This connector is for the system power button. Pressing the power switch for more than
four seconds while the system is ON turns the system OFF.
•
Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.
ASUS VANGUARD B85
1-25
12. USB 2.0 connectors (10-1 pin USB910, USB1112, USB1314)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specifications and supports up to
480Mbps connection speed.
PIN 1
USB+5V
USB_P12USB_P12+
GND
USB+5V
USB_P13USB_P13+
GND
NC
USB+5V
USB_P9USB_P9+
GND
NC
USB+5V
USB_P10USB_P10+
GND
PIN 1
VANGUARD B85
USB1314
PIN 1
USB+5V
USB_P14USB_P14+
GND
USB1112
USB+5V
USB_P11USB_P11+
GND
NC
USB910
VANGUARD B85 USB2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
1.8
1.
Onboard LED
Standby Power LED
The motherboard comes with a standby power LED that lights up to indicate that the
system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should
shut down the system and unplug the power cable before removing or plugging in any
motherboard component. The illustration below shows the location of the onboard LED.
SB_PWR
ON
Standby Power
VANGUARD B85 Onboard LED
1-26
OFF
Powered Off
Chapter 1: Product introduction
1.9
1.9.1
Software support
Installing an operating system
This motherboard supports Windows® 7 (32bit/64bit) and Windows® 8 (32bit/64bit) Operating
Systems (OS). Always install the latest OS version and corresponding updates to maximize
the features of your hardware.
Motherboard settings and hardware options vary. Refer to your OS documentation for
detailed information.
1.9.2
Support DVD information
The Support DVD that comes with the motherboard package contains the drivers, software
applications, and utilities that you can install to avail all motherboard features.
The contents of the Support DVD are subject to change at any time without notice. Visit the
ASUS website at www.asus.com for updates.
To run the Support DVD
Place the Support DVD into the optical drive. If Autorun is enabled in your computer, the
DVD automatically displays the Specials screen which lists the unique features of your ASUS
motherboard. Click Drivers, Utilities, AHCI Driver, Manual, Contact and Specials tabs to
display their respective menus.
The following screen is for reference only.
Click an icon to
display Support
DVD/motherboard
information
Click an item to install
If Autorun is NOT enabled in your computer, browse the contents of the Support DVD to
locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run
the DVD.
ASUS VANGUARD B85
1-27
1.9.3
Intel® SBA support
Intel® SBA (Small Business Advantage) is a combination of hardware and software that
provides unique security and productivity capabilities designed for small businesses.
•
Intel® SBA requires MEI driver (AMT host software kit) installed.
•
Some models without the 5MB ME firmware do not support Intel® SBA. Please refer to
the spec sheet for details.
Platform requirements:
•
Windows® 7 (32/64bit)/Windows® 8 (32/64bit)
•
Lynx Point PCH with Core™ Haswell CPU (Shark Bay platforms) with 5MB ME 9.0
firmware load
CPU and chipsets requirements:
* Intel® Core™ i3/i5/i7 with one of these chipsets: B85, H87, Q87
* Intel® Core™ i5/i7 vPro with one of these chipsets: B85, H87, Q87
•
The Intel® Management Engine software kit must be installed (The Local Manageability
Service and the Intel® Management Engine Interface must be installed and running.)
•
Local Administrator rights on the target machine
The Intel® SBA does not support the 800 x 600 screen resolution.
Visit the ASUS website at www.asus.com for the latest CPU QVL (Qualified Vendors List).
1-28
Chapter 1: Product introduction
BIOS information
2.1
Managing and updating your BIOS
2
Save a copy of the original motherboard BIOS file to a USB flash disk in case you need to
restore the BIOS in the future. Copy the original motherboard BIOS using the ASUS Update
utility.
2.1.1
EZ Update
EZ Update is a utility that allows you to automatically update your motherboard’s softwares,
drivers and the BIOS version easily. With this utlity, you can also manually update the saved
BIOS and select a boot logo when the system goes into POST.
To launch EZ Update, click EZ Update on the AI Suite 3 main menu bar.
Click to check for the
latest BIOS from the
Internet
Click to find and
select the BIOS
from file
Click to select a
boot logo
Click to update
the BIOS
•
EZ Update requires an Internet connection either through a network or an ISP
(Internet Service Provider).
•
The screenshot in this section may vary by models.
ASUS VANGUARD B85
2-1
2.1.2
ASUS EZ Flash 2
The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS‑based
utility.
Before you start using this utility, download the latest BIOS file from the ASUS website at
www.asus.com.
To update the BIOS using EZ Flash 2:
2-2
1.
Insert the USB flash disk that contains the latest BIOS file to the USB port.
2.
Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select
ASUS EZ Flash Utility and press <Enter> to enable it.
3.
Press <Tab> to switch to the Drive field.
4.
Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS,
and then press <Enter>.
5.
Press <Tab> to switch to the Folder Info field.
6.
Press the Up/Down arrow keys to find the BIOS file, and then press <Enter> to perform
the BIOS update process. Reboot the system when the update process is done.
•
This function supports USB flash disks formatted using FAT32/16 on a single partition
only.
•
DO NOT shut down or reset the system while updating the BIOS to prevent system
boot failure!
Chapter 2: Getting started
2.1.3
ASUS CrashFree BIOS 3 utility
The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file
when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS
file using the motherboard support DVD or a USB flash drive that contains the updated BIOS
file.
•
Before using this utility, rename the BIOS file in the removable device into
B85VA.CAP.
•
The BIOS file in the support DVD may not be the latest version. Download the latest
BIOS file from the ASUS website at www.asus.com.
Recovering the BIOS
To recover the BIOS:
1.
Turn on the system.
2.
Insert the support DVD to the optical drive or the USB flash drive that contains the
BIOS file to the USB port.
3.
The utility automatically checks the devices for the BIOS file. When found, the utility
reads the BIOS file and enters ASUS EZ Flash 2 utility automatically.
4.
The system requires you to enter BIOS Setup to recover BIOS settings. To ensure
system compatibility and stability, we recommend that you press <F5> to load default
BIOS values.
DO NOT shut down or reset the system while updating the BIOS! Doing so can cause
system boot failure!
2.1.4
ASUS BIOS Updater
The ASUS BIOS Updater allows you to update BIOS in a DOS environment. This utility also
allows you to copy the current BIOS file that you can use as a backup when the BIOS fails or
gets corrupted during the updating process.
The succeeding utility screens are for reference only. The actual utility screen displays may
not be same as shown.
Before updating BIOS
1.
Prepare the motherboard support DVD and a USB flash drive formatted using
FAT32/16 on a single partition.
2.
Download the latest BIOS file and BIOS Updater from the ASUS website at
http://support.asus.com and save them on the USB flash drive.
NTFS is not supported under DOS environment. Do not save the BIOS file and BIOS
Updater to a hard disk drive or USB flash drive in NTFS format.
3.
Turn off the computer and disconnect all SATA hard disk drives (optional).
ASUS VANGUARD B85
2-3
Booting the system to a DOS environment
1.
Insert the USB flash drive with the latest BIOS file and BIOS Updater to the USB port.
2.
Boot your computer. When the ASUS Logo appears, press <F8> to show the BIOS
Boot Device Select Menu. Insert the support DVD into the optical drive and select the
optical drive as the boot device.
3. When the Make Disk menu appears, select the FreeDOS command prompt item by
pressing the item number.
4.
At the FreeDOS prompt, type d: and press <Enter> to switch the disk from Drive C
(optical drive) to Drive D (USB flash drive).
Updating the BIOS file
To update the BIOS file using BIOS Updater:
1.
At the FreeDOS prompt, type bupdater /pc /g and press <Enter>.
2.
The BIOS Updater screen appears as below.
VANGUARD B85
0214
07/26/2013
B85VA.CAP 8194 2013-07-20 15:25:48
2-4
Chapter 2: Getting started
3.
Press <Tab> to switch between screen fields and use the <Up/Down/Home/End> keys
to select the BIOS file and press <Enter>. BIOS Updater checks the selected BIOS file
and prompts you to confirm BIOS update.
4.
Select Yes and press <Enter>. When BIOS update is done, press <ESC> to exit BIOS
Updater. Restart your computer.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
•
For BIOS Updater version 1.30 or later, the utility automatically exits to the DOS
prompt after updating BIOS.
•
Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the Load Optimized Defaults item under the Exit menu. Refer to section 2.10
Exit menu for details.
•
Ensure to connect all SATA hard disk drives after updating the BIOS file if you have
disconnected them.
ASUS VANGUARD B85
2-5
2.2
BIOS setup program
Use the BIOS Setup program to update the BIOS or configure its parameters. The BIOS
screens include navigation keys and brief online help to guide you in using the BIOS Setup
program.
Entering BIOS Setup at startup
To enter BIOS Setup at startup:
•
Press <Delete> during the Power-On Self Test (POST). If you do not press <Delete>,
POST continues with its routines.
Entering BIOS Setup after POST
To enter BIOS Setup after POST:
•
Press <Ctrl>+<Alt>+<Del> simultaneously.
•
Press the reset button on the system chassis.
•
Press the power button to turn the system off then back on. Do this option only if you
failed to enter BIOS Setup using the first two options.
Using the power button, reset button, or the <Ctrl>+<Alt>+<Del> keys to force reset from a
running operating system can cause damage to your data or system. We recommend you
always shut down the system properly from the operating system.
•
The BIOS setup screens shown in this section are for reference purposes only, and
may not exactly match what you see on your screen.
•
Visit the ASUS website at www.asus.com to download the latest BIOS file for this
motherboard.
•
Ensure that a USB mouse is connected to your motherboard if you want to use the
mouse to control the BIOS setup program.
•
If the system becomes unstable after changing any BIOS setting, load the default
settings to ensure system compatibility and stability. Select the Load Optimized
Defaults item under the Exit menu or press hotkey F5. See section 2.10 Exit Menu
for details.
•
If the system fails to boot after changing any BIOS setting, try to clear the CMOS and
reset the motherboard to the default value. See section 1.6 Jumpers for information
on how to erase the RTC RAM.
BIOS menu screen
The BIOS setup program can be used under two modes: EZ Mode and Advanced Mode.
You can change modes from the Exit menu or from the Exit/Advanced Mode button in the EZ
Mode/Advanced Mode screen.
EZ Mode
By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ
Mode provides you an overview of the basic system information, and allows you to select
the display language, system performance mode and boot device priority. To access the
Advanced Mode, click Exit/Advanced Mode, then select Advanced Mode or press F7 for the
advanced BIOS settings.
2-6
Chapter 2: Getting started
The default screen for entering the BIOS setup program can be changed. Refer to the
Setup Mode item in section 2.8 Boot menu for details.
Displays the CPU/motherboard
temperature, CPU voltage output,
and CPU/chassis fan speed
Selects the
Advanced
mode functions
Selects the boot
device priority
Power saving
mode
Selects the display language
of the BIOS setup program
Exits the BIOS setup program without
saving the changes, saves the changes
and resets the system, or enters the
Advanced Mode
SATA
information
Normal mode
ASUS Optimal
mode
Displays the
Advanced mode
menus
Selects the boot
device priority
Loads
optimized
default
Displays the system
properties of the
selected mode on the
right hand side
•
The boot device options vary depending on the devices you installed to the system.
•
The Boot Menu(F8) button is available only when the boot device is installed to the
system.
Advanced Mode
The Advanced Mode provides advanced options for experienced end-users to configure the
BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the
following sections for the detailed configurations.
To access the EZ Mode, click Exit, then select ASUS EZ Mode or press <F7>.
ASUS VANGUARD B85
2-7
Back button
Menu items
Submenu item
Menu bar
Configuration fields
Pop-up window
General help
Navigation keys
Last modified
settings
Scroll bar
Quick note
Menu bar
The menu bar on top of the screen has the following main items:
My Favorites For saving the frequently-used system settings and configuration
Main
For changing the basic system configuration
Ai Tweaker
For changing the overclocking settings
Advanced
Boot
For changing the advanced system settings
For displaying the system temperature, power status, and changing the
fan settings
For changing the system boot configuration
Tool
Exit
For configuring options for special functions
For selecting the exit options and loading default settings
Monitor
Menu items
The highlighted item on the menu bar displays the specific items for that menu. For example,
selecting Main shows the Main menu items.
The other items (Ai Tweaker, Advanced, Monitor, Boot, Tool, and Exit) on the menu bar have
their respective menu items.
Back button
This button appears when entering a submenu. Press <Esc> or use the USB mouse to click
this button to return to the previous menu screen.
2-8
Chapter 2: Getting started
Submenu items
A greater than sign (>) before each item on any menu screen means that the item has a
submenu. To display the submenu, select the item and press <Enter>.
Pop-up window
Select a menu item and press <Enter> to display a pop-up window with the configuration
options for that item.
Scroll bar
A scroll bar appears on the right side of a menu screen when there are items that do not fit on
the screen. Press the Up/Down arrow keys or <Page Up> / <Page Down> keys to display the
other items on the screen.
Navigation keys
At the bottom right corner of the menu screen are the navigation keys for the BIOS setup
program. Use the navigation keys to select items in the menu and change the settings.
For the navigation key, it’s only available in English. If you delete the default shortcuts, they
will appear on your next system bootup.
General help
At the top right corner of the menu screen is a brief description of the selected item.
Configuration fields
These fields show the values for the menu items. If an item is user-configurable, you can
change the value of the field opposite the item. You cannot select an item that is not
user-configurable.
A configurable field is highlighted when selected. To change the value of a field, select it and
press <Enter> to display a list of options.
Quick Note button
This button allows you to enter notes of the activities that you have done in BIOS.
•
The Quick Note function does not support the following keyboard functions: delete,
cut, copy and paste.
•
You can only use the English letters to type your notes.
Last Modified button
This button shows the items that you last modified and saved in BIOS Setup.
ASUS VANGUARD B85
2-9
2.3
My Favorites
MyFavorites is your personal space where you can easily save and access your favorite
BIOS items.
Adding items to My Favorites
To add frequently-used BIOS items to My Favorites:
1.
Use the arrow keys to select an item that you want to add. When using a mouse, hover
the pointer to the item.
2.
Press <F4> on your keyboard or right-click on your mouse to add the item to My
Favorites page.
You cannot add the following items to My Favorites:
2-10
•
Items with submenu options
•
User-configurable items such as language and boot device order
•
Configuration items such as Memory SPD Information, system time and date
Chapter 2: Getting started
2.4
Main menu
2.4.1
System Language [English]
The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup
program. The Main menu provides you an overview of the basic system information, and
allows you to set the system date, time, language, and security settings.
Allows you to choose the BIOS language version from the options. Configuration options:
[English]
[Español] [Русский] [한국어]
2.4.2
System Date [Day xx/xx/xxxx]
Allows you to set the system date.
2.4.3
System Time [xx:xx:xx]
Allows you to set the system time.
2.4.4
Security
The Security menu items allow you to change the system security settings.
•
If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC)
RAM to clear the BIOS password. See section 1.6 Jumpers for information on how to
erase the RTC RAM.
•
The Administrator or User Password items on top of the screen show the default
Not Installed. After you set a password, these items show Installed.
ASUS VANGUARD B85
2-11
Administrator Password
If you have set an administrator password, we recommend that you enter the administrator
password for accessing the system. Otherwise, you might be able to see or change only
selected fields in the BIOS setup program.
To set an administrator password:
1.
Select the Administrator Password item and press <Enter>.
2.
From the Create New Password box, key in a password, then press <Enter>.
3.
Confirm the password when prompted.
To change an administrator password:
1.
Select the Administrator Password item and press <Enter>.
2.
From the Enter Current Password box, key in the current password, then press
<Enter>.
3.
From the Create New Password box, key in a new password, then press <Enter>.
4.
Confirm the password when prompted.
To clear the administrator password, follow the same steps as in changing an administrator
password, but press <Enter> when prompted to create/confirm the password. After you clear
the password, the Administrator Password item on top of the screen shows Not Installed.
User Password
If you have set a user password, you must enter the user password for accessing the system.
The User Password item on top of the screen shows the default Not Installed. After you set
a password, this item shows Installed.
To set a user password:
1.
Select the User Password item and press <Enter>.
2.
From the Create New Password box, key in a password, then press <Enter>.
3.
Confirm the password when prompted.
To change a user password:
1.
Select the User Password item and press <Enter>.
2.
From the Enter Current Password box, key in the current password, then press
<Enter>.
3.
From the Create New Password box, key in a new password, then press <Enter>.
4.
Confirm the password when prompted.
To clear the user password, follow the same steps as in changing a user password, but press
<Enter> when prompted to create/confirm the password. After you clear the password, the
User Password item on top of the screen shows Not Installed.
2-12
Chapter 2: Getting started
2.5
Ai Tweaker menu
The Ai Tweaker menu items allow you to configure overclocking-related items.
Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field
values can cause the system to malfunction.
The configuration options for this section vary depending on the CPU and DIMM model you
installed on the motherboard.
Scroll down to display the other items.
Target CPU Turbo-Mode Speed : xxxxMHz
Displays the target CPU Turbo-Mode speed.
Target DRAM Speed : xxxxMHz
Displays the target DRAM speed.
Target Cache Speed : xxxxMHz
Displays the target Cache speed.
Target DMI/PEG Clock : xxxxMHz
Displays the target DMI/PEG clock.
Target iGPU Speed : xxxxMHz
Displays the target iGPU speed.
2.5.1
ASUS MultiCore Enhancement [Auto]
[Auto]
Set to [Auto] for optimized performance under XMP/Manual/User-defined
memory frequency mode.
[Disabled]
Allows you to set to default core ratio settings.
ASUS VANGUARD B85
2-13
2.5.2
CPU Core Ratio [Auto]
Allows you to set the CPU core ratio automatically or manually.
[Auto]
Sets all CPU Core Ratio to Intel® CPU default settings automatically.
[Sync All Cores] Allows you to set CPU Core Ratio settings for all cores.
[Per Core]
Allows you to set CPU Core Ratio individually.
The following two items appear only when you set the CPU Core Ratio to [Sync All
Cores] or [Per Core].
1-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually assign a 1-Core
Limit value, which should be higher than or equal to the 2-Core Ratio Limit.
2-/3-/4-Core Ratio Limit [Auto]
These items become configurable only when you set the CPU Core Ratio item to [Per
Core].
2.5.3
Min. CPU Cache Ratio [Auto]
Allows you to set the uncore ratio of the processor to its possible minimum value.
Configuration options: [Auto] [1] ~ [30].
2.5.4
Max. CPU Cache Ratio [Auto]
Allows you to set the uncore ratio of the processor to its possible maximum value.
Configuration options: [Auto] [1] ~ [30].
2.5.5
BCLK Frequency : DRAM Frequency Ratio [Auto]
Allows you to set the BCLK frequency to DRAM frequency ratio.
[Auto]
DRAM frequency is set to the optimized settings.
[100:133]
The BCLK frequency to DRAM frequency ratio is set to 100:133.
[100:100]
The BCLK frequency to DRAM frequency ratio is set to 100:100.
2.5.6
DRAM Frequency [Auto]
Allows you to set the memory operating frequency. The configuration options vary with the
BCLK/PEG Frequency item settings.
Selecting a very high memory frequency may cause the system to become unstable! If this
happens, revert to the default setting.
2.5.7
Max. CPU Graphics Ratio [Auto]
Allows you to set the CPU Graphics maximum ratio. The maximum ratio is 60x. Use <+>/<->
to adjust the value.
2-14
Chapter 2: Getting started
2.5.8
GPU Boost [As is]
Allows you to enable the GPU Boost to accelerate the integrated GPU for extreme graphics
performance. Configuration options: [As is] [Enabled].
2.5.9
EPU Power Saving Mode [Disabled]
Allows you to enable or disable the EPU power saving function. Configuration options:
[Disabled] [Enabled]
2.5.10
DRAM Timing Control
The subitems in this menu allow you to set the DRAM timing control features. Use the <+>
and <-> keys to adjust the value. To restore the default setting, type [auto] using the keyboard
and press the <Enter> key.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
Primary Timings
DRAM CAS# Latency [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [31 DRAM Clock]
DRAM RAS# to CAS# Delay [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [31 DRAM Clock]
DRAM RAS# PRE Time [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [31 DRAM Clock]
DRAM RAS# ACT Time [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [63 DRAM Clock]
DRAM COMMAND Rate [Auto]
Configuration options: [Auto] [1 DRAM Clock] [2 DRAM Clock] [3 DRAM Clock]
Secondary Timings
DRAM RAS# to RAS# Delay [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [15 DRAM Clock]
DRAM REF Cycle Time [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [511 DRAM Clock]
DRAM Refresh Interval [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [65535 DRAM Clock]
DRAM WRITE Recovery Time [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [16 DRAM Clock]
DRAM READ to PRE Time [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [15 DRAM Clock]
DRAM FOUR ACT WIN Time [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [255 DRAM Clock]
ASUS VANGUARD B85
2-15
DRAM WRITE to READ Delay [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [15 DRAM Clock]
DRAM CKE Minimum pulse width [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [15 DRAM Clock]
DRAM CAS# Write to Latency [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [31 DRAM Clock]
RTL IOL control
DRAM RTL (CHA_R0D0) [Auto]
Configuration options: [Auto] [1] - [63]
DRAM RTL (CHA_R0D1) [Auto]
Configuration options: [Auto] [1] - [63]
DRAM RTL (CHA_R1D0) [Auto]
Configuration options: [Auto] [1] - [63]
DRAM RTL (CHA_R1D1) [Auto]
Configuration options: [Auto] [1] - [63]
DRAM RTL (CHB_R0D0) [Auto]
Configuration options: [Auto] [1] - [63]
DRAM RTL (CHB_R0D1) [Auto]
Configuration options: [Auto] [1] - [63]
DRAM RTL (CHB_R1D0) [Auto]
Configuration options: [Auto] [1] - [63]
DRAM RTL (CHB_R1D1) [Auto]
Configuration options: [Auto] [1] - [63]
DRAM IO-L (CHA_R0D0) [Auto]
Configuration options: [Auto] [1] - [15]
DRAM IO-L (CHA_R0D1) [Auto]
Configuration options: [Auto] [1] - [15]
DRAM IO-L (CHA_R1D0 [Auto]
Configuration options: [Auto] [1] - [15]
DRAM IO-L (CHA_R1D1 [Auto]
Configuration options: [Auto] [1] - [15]
DRAM IO-L (CHB_R0D0 [Auto]
Configuration options: [Auto] [1] - [15]
DRAM IO-L (CHA_R1D0 [Auto]
Configuration options: [Auto] [1] - [15]
DRAM IO-L (CHA_R1D1 [Auto]
Configuration options: [Auto] [1] - [15]
DRAM IO-L (CHB_R0D0 [Auto]
Configuration options: [Auto] [1] - [15]
2-16
Chapter 2: Getting started
Third Timings
tRDRD [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [7 DRAM Clock]
tRDRD_dr [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [15 DRAM Clock]
tRDRD_dd [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [15 DRAM Clock]
tWRRD [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [63 DRAM Clock]
tWRRD_dr [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [15 DRAM Clock]
tWRRD_dd [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [15 DRAM Clock]
tWRWR [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [7 DRAM Clock]
tWRWR_dr [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [15 DRAM Clock]
tWRWR_dd [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [15 DRAM Clock]
Dec_WRD [Auto]
Configuration options: [Auto] [0] [1]
tRDWR [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [31 DRAM Clock]
tRDWR_dr [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [31 DRAM Clock]
tRDWR_dd [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [31 DRAM Clock]
MISC
MRC Fast Boot [Auto]
Allows you to enable, disable or automatically set the MRC fast boot. Configuration
options: [Auto] [Enabled] [Disabled]
DRAM CLK Period [Auto]
Configuration options: [Auto] [1] – [14]
Channel A DIMM Control [Enable Bot...]
Configuration options: [Enable Both DIMMS] [Disable DIMM0] [Disable DIMM1]
[Disable Both DIMMS]
Channel B DIMM Control [Enable Bot...]
Configuration options: [Enable Both DIMMS] [Disable DIMM0] [Disable DIMM1]
[Disable Both DIMMS]
ASUS VANGUARD B85
2-17
Scrambler Setting [Optimized ...]
Configuration options: [Optimized (ASUS)] [Default (MRC)]
MCH Full Check [Auto]
Allows you to enable, disable or automatically set the MCH Full Check function.
Configuration options: [Auto] [Enabled] [Disabled]
Skew Control
Adjust these items may enhance the DRAM overclocking capability and stability.
Transmitter Rising Slope [Auto]
Configuration options: [0] ~ [31]
Transmitter Fallng Slope [Auto]
Configuration options: [0] ~ [31]
Transmitter Control Time [Auto]
Configuration options: [0] ~ [31]
Receiver Rising Slope [Auto]
Configuration options: [0] ~ [31]
Receiver Fallng Slope [Auto]
Configuration options: [0] ~ [31]
Receiver Control Time [Auto]
Configuration options: [0] ~ [31]
2.5.11
DIGI+ VRM
CPU Load-Line Calibration [Auto]
Load-line is defined by Intel VRM specification and affects CPU voltage. The CPU working
voltage will decrease proportionally to CPU loading. Higher value gets a higher voltage and
better overclocking performance, but increases the CPU and VRM thermal conditions. This
item allows you to adjust the voltage range from the following percentages to boost the
system performance: 0% (Regular), 25% (Medium), 50% (High), 75% (Ultra High), and 100%
(Extreme). Configuration options: [Auto] [Regular] [Medium] [High] [Ultra High] [Extreme]
The actual performance boost may vary depending on your CPU specification.
CPU Voltage Frequency [Auto]
Frequency switching affects the VRM transient response, and the thermal component. Higher
frequency gets quicker transient response. Configuration options: [Auto] [Manual]
DO NOT remove the thermal module when switching to Manual Mode. The thermal
conditions should be monitored.
VRM Spread Spectrum [Disabled]
This item becomes configurable only when you set the CPU Voltage Frequency item to
[Auto] and allows you to enable the spread spectrum to enhance system stability.
CPU Power Phase Control [Standard]
Allows you to set the power phase based on the CPU. Configuration options: [Auto]
[Standard] [Optimized] [Extreme]
2-18
Chapter 2: Getting started
DO NOT remove the thermal module when setting this item to [Extreme]. The thermal
conditions should be monitored.
CPU Power Duty Control [T.Probe]
DIGI + VRM Duty Control adjusts the current of every VRM phase and the thermal conditions
of every component.
[T. Probe]
Select to maintain the VRM thermal balance.
[Extreme]
Select to maintain the current VRM balance.
CPU Current Capability [Auto]
Allows you to configure the total power range, and extends the overclocking frequency range
simultaneously. Configuration options: [Auto] [100%] [110%] [120%] [130%] [140%]
Choose a higher value when overclocking, or under a high CPU loading for extra power
support.
CPU Power Thermal Control [130]
A higher temperature brings a wider CPU power thermal range and extends the overclocking
tolerance to enlarge the O.C. potential. Use the <+> or <-> keys to adjust the value. The
values depend on the CPU installed.
DO NOT remove the thermal module. The thermal conditions should be monitored.
2.5.12
CPU Power Management
The subitems in this menu allow you to set the CPU ratio and features.
Enhanced Intel® SpeedStep Technology [Enabled]
Allows you to enable or disable the Enhanced Intel® SpeedStep Technology (EIST).
[Disabled]
Disables this function.
[Enabled]
The operating system dynamically adjusts the processor voltage and
core frequency which may result in decreased average consumption and
decreased average heat production.
Turbo Mode [Enabled]
Allows you to enable your core processor’s speed to run faster than the marked frequency in
a specific condition. Configuration options: [Disabled] [Enabled]
•
Turbo Mode is only available on selected CPU models only.
•
The following first three items appear only when you set the Turbo Mode to [Enabled].
Turbo Mode Parameters
Long Duration Package Power Limit [Auto]
Allows you to limit the turbo ratio’s long duration package power.
Use the <+> and <-> keys to adjust the value.
ASUS VANGUARD B85
2-19
Package Power Time Window [Auto]
Allows you to set the package power time window.
Use the <+> and <-> keys to adjust the value.
Short Duration Package Power Limit [Auto]
Allows you to limit the turbo ratio’s long duration power.
Use the <+> and <-> keys to adjust the value.
CPU Integrated VR Current Limit [Auto]
Allows you to limit the CPU Integrated VR current
Use <+> and <-> key to adjust the value.
CPU Internal Power Switching Frequency
Frequency Tuning Mode [Auto]
Allows you to set the frequency tuning mode. Configuration options: [Auto] [+] [-]
CPU Internal Power Fault Control
Thermal Feedback [Auto]
When enabled, it allows CPU to take precautionary actions when the thermal of the
external regulator exceeds the limit.Configuration options: [Auto] [Disabled] [Enabled]
CPU Integrated VR Fault Management [Auto]
Allows you to manage the CPU Integrated VR fault. Configuration options: [Auto]
[Disabled] [Enabled]
CPU Internal Power Configuration
CPU Integrated VR Efficiency Management [Auto]
Allows you to manage the CPU integrated VR efficiency. Configuration options: [Auto]
[High Performance] [Balanced]
Power Decay Mode [Auto]
Enable to improve power saving on the Fully Integrated Voltage Regulator as the processor
enters low current mode. Configuration options: [Auto] [Disabled] [Enabled]
Idle Power-in Response [Auto]
Allows you to set the idle power-in response. Configuration options: [Auto] [Regular] [Fast]
Idle Power-out Response [Auto]
Allows you to set the idle power-out response. Configuration options: [Auto] [Regular] [Fast]
Power Current Slope [Auto]
Allows you to set the power current slope. Configuration options: [Auto] [Level 4] [Level 3]
[Level 2] [Level 1] [Level 0] ]Level -1] [Level -2] [Level -3] [Level -4].
Power Current Offset [Auto]
Allows you to set the power current offset. Configuration options: [Auto] [100%] [87.5%] [75%]
[62.5%] [50%] [37.5%] [25%] [12.5%] [0%] [-12.5%] [-25%] [-37.5%] [-50.0%] [-62.5%] [-75%]
[-87.5%] [-100%]
2-20
Chapter 2: Getting started
Power Fast Ramp Response [Auto]
Allows you to set the power fast ramp response.
Use the <+> and <-> keys to adjust the value.
CPU Internal Power Saving Control
Power Saving Level 1 Threshhold [Auto]
Allows you to set the power saving level 1 threshhold.
Use the <+> and <-> keys to adjust the value.
Power Saving Level 2 Threshhold [Auto]
Allows you to set the power saving level 2 threshhold.
Use the <+> and <-> keys to adjust the value.
Power Saving Level 3 Threshhold [Auto]
Allows you to set the power saving level 3 threshhold.
Use the <+> and <-> keys to adjust the value.
2.5.13
Extreme Over-voltage [Disabled]
By default, this item is set to [Disabled] and helps provide over voltage protection for the
CPU. When you set this item to [Enabled], you can select voltage settings for overclocking,
but this will not guarantee the CPU’s lifespan.
2.5.14
CPU Core Voltage [Auto]
This item allows you to set the CPU core voltage. Increase the voltage when increasing the
core frequency. Configuration options: [Auto] [Manual Mode] [Offset Mode] [Adaptive Mode].
The following item appears only when you set the CPU Core Voltage to [Manual Mode].
CPU Core Voltage Override [Auto]
This item allows you to set the CPU core voltage override. The values range from 0.001V to
1.920V with a 0.001V interval.
The following item appears only when you set the CPU Core Voltage to [Offset Mode] or
[Adaptive Mode].
Offset Mode Sign [+]
This item allows you to set the offset mode sign. Configuration options: [+] [-]
CPU Core Voltage Offset [Auto]
This item appears only when you set the CPU Core Voltage to [Offset Mode] or
[Adaptive Mode] and allows you to set the CPU core voltage offset. The values range
from 0.001V to 0.999V with a 0.001V interval.
The following two items appear only when you set the CPU Core Voltage to [Adaptive
Mode].
ASUS VANGUARD B85
2-21
Additional Turbo Mode CPU Core Voltage [Auto]
This item allows you to set the additional turbo mode CPU core voltage. The values range
from 0.001V to 1.920V with a 0.001V interval.
Total Adaptive Mode CPU Core Voltage [Auto]
This item allows you to set the total adaptive mode CPU core voltage. The values range from
0.001V to 1.920V with a 0.001V interval.
2.5.15
CPU Cache Voltage [Auto]
This item allows you to set the CPU Cache voltage. Increase the cache voltage when
increasing the ring frequency. Configuration options: [Auto] [Manual Mode] [Offset Mode]
[Adaptive Mode].
The following item appears only when you set the CPU Cache Voltage to [Manual Mode].
CPU Cache Voltage Override [Auto]
This item allows you to set the CPU Cache voltage override. The values range from 0.001V
to 1.920V with a 0.001V interval.
The following item appears only when you set the CPU Cache Voltage to [Offset Mode] or
[Adaptive Mode].
Offset Mode Sign [+]
This item allows you to set the offset mode sign. Configuration options: [+] [-]
CPU Cache Voltage Offset [Auto]
This item appears only when you set the CPU Cache Voltage to [Offset Mode] or
[Adaptive Mode] and allows you to set the CPU cache voltage offset. The values range
from 0.001V to 0.999V with a 0.001V interval.
The following two items appear only when you set the CPU Cache Voltage to [Adaptive
Mode].
Additional Turbo Mode CPU Cache Voltage [Auto]
This item allows you to set the additional turbo mode CPU cache voltage. The values range
from 0.001V to 1.920V with a 0.001V interval.
Total Adaptive Mode CPU Cache Voltage [Auto]
This item allows you to set the total adaptive mode CPU cache voltage. The values range
from 0.001V to 1.920V with a 0.001V interval.
2.5.16
CPU Graphics Voltage [Auto]
This item allows you to set the CPU graphics voltage. Increase the graphics voltage when
increasing the CPU graphics frequency. Configuration options: [Auto] [Manual Mode] [Offset
Mode] [Adaptive Mode].
2-22
Chapter 2: Getting started
The following item appears only when you set the CPU Graphics Voltage to [Manual
Mode].
CPU Graphics Voltage Override [Auto]
This item allows you to set the CPU graphics voltage override. The values range from 0.001V
to 1.920V with a 0.001V interval.
The following item appears only when you set the CPU Graphics Voltage to [Offset
Mode] or [Adaptive Mode].
Offset Mode Sign [+]
This item allows you to set the offset mode sign. Configuration options: [+] [-]
CPU Graphics Voltage Offset [Auto]
This item appears only when you set the CPU Graphics Voltage to [Offset Mode] or
[Adaptive Mode] and allows you to set the CPU graphics voltage offset. The values
range from 0.001V to 0.999V with a 0.001V interval.
The following two items appear only when you set the CPU Graphics Voltage to [Adaptive
Mode].
Additional Turbo Mode CPU Graphics Voltage [Auto]
This item allows you to set the additional turbo mode CPU graphics voltage. The values
range from 0.001V to 1.920V with a 0.001V interval.
Total Adaptive Mode CPU Graphics Voltage [Auto]
This item allows you to set the total adaptive mode CPU graphics voltage. The values range
from 0.001V to 1.920V with a 0.001V interval.
2.5.17
CPU System Agent Voltage Offset Mode Sign [+]
This item allows you to set the CPU system agent voltage offset mode sign. Configuration
options: [+] [-].
CPU System Agent Voltage Offset [Auto]
This item allows you to set the CPU system agent voltage offset. Increase the value when
increasing DRAM frequency. The values range from 0.001V to 0.999V with a 0.001V interval.
2.5.18
CPU Analog I/O Voltage Offset Mode Sign [+]
This item allows you to set the CPU analog I/O voltage offset mode sign. Configuration
options: [+] [-].
ASUS VANGUARD B85
2-23
CPU Analog I/O Voltage Offset [Auto]
This item allows you to set the CPU analog I/O voltage offset. Increase the value when
increasing DRAM frequency. The values range from 0.001V to 0.999V with a 0.001V interval.
2.5.19
CPU Digital I/O Voltage Offset Mode Sign [+]
This item allows you to set the CPU digital I/O voltage offset mode sign. Configuration
options: [+] [-].
CPU Digital I/O Voltage Offset [Auto]
This item allows you to set the CPU digital I/O voltage offset. Increase the value when
increasing DRAM frequency. The values range from 0.001V to 0.999V with a 0.001V interval.
2.5.20
SVID Control [Auto]
Disabling SVID Control stops the processor from commmunicating with the external voltage
regulator. Configuration options: [Auto] [Disabled] [Enabled].
2.5.21
CPU Input Voltage [Auto]
This item allows you to set the CPU input voltage. The values range from 0.800V to 2.700V
with a 0.010V interval.
2.5.22
DRAM Voltage [Auto]
Allows you to set the DRAM Voltage. The values range from 1.200V to 1.920V with a
0.01000V interval.
2..5.23 PCH Core Voltage [Auto]
Allows you to set the Platform Controller Hub voltage. Use the <+> or <-> keys to adjust
the value. The minimum voltage is 0.70000V and the maximum voltage varies with DRAM
voltage.with a 0.01250V interval.
The system may need better cooling system to work stably under high voltage settings.
2.5.24
PCH VLX Voltage [Auto]
Allows you to set the voltage for the I/O on the PCH. Use the <+> or <-> keys to adjust the
value. The values range from 1.20000V to 2.0000V with a 0.01250V interval.
2.5.25
DRAM CTRL REF Voltage [Auto]
Allows you to set the DRAM CTRL REF Voltage. The values range from 0.39500x to
0.63000x with a 0.00500x interval.
2.5.26
DRAM DATA REF Voltage on CHA [Auto]
Allows you to set the DRAM DATA REF Voltage on CHA. The values range from 0.39500x to
0.63000x with a 0.00500x interval.
2-24
Chapter 2: Getting started
2.5.27
DRAM DATA REF Voltage on CHB [Auto]
Allows you to set the DRAM DATA REF Voltage on CHB. The values range from 0.39500x to
0.63000x with a 0.00500x interval.
2.5.28
CPU Spread Spectrum [Auto]
[Auto]
Automatic configuration.
[Disabled]
Enhances the BCLK overclocking ability.
[Enabled]
Sets to [Enabled] for EMI control.
2.6
Advanced menu
The Advanced menu items allow you to change the settings for the CPU and other system
devices.
Be cautious when changing the settings of the Advanced menu items. Incorrect field values
can cause the system to malfunction.
2.6.1
CPU Configuration
The items in this menu show the CPU-related information that the BIOS automatically
detects.
The items shown in submenu may be different due to the CPU you installed.
Intel® Adaptive Thermal Monitor [Enabled]
[Enabled]
Enables the overheated CPU to throttle its clock speed to cool down.
[Disabled]
Disables the CPU thermal monitor function.
ASUS VANGUARD B85
2-25
Hyper-threading [Enabled]
The Intel Hyper-Threading Technology allows a hyper-threading processor to appear as two
logical processors to the operating system, allowing the operating system to schedule two
threads or processes simultaneously.
[Enabled]
Two threads per activated core are enabled.
[Disabled]
Only one thread per activated core is enabled.
Active Processor Cores [All]
Allows you to choose the number of CPU cores to activate in each processor package.
Configuration options: [All] [1] [2] [3]
Limit CPUID Maximum [Disabled]
[Enabled]
Allows legacy operating systems to boot even without support for CPUs
with extended CPUID functions.
[Disabled]
Disables this function.
Execute Disable Bit [Enabled]
[Enabled]
Enables the No-Execution Page Protection Technology.
[Disabled]
Forces the XD feature flag to always return to zero (0).
Intel Virtualization Technology [Disabled]
®
[Enabled]
Allows a hardware platform to run multiple operating systems separately
and simultaneously, enabling one system to virtually function as several
systems.
[Disabled]
Disables this function.
Hardware Prefetcher [Enabled]
[Enabled]
Allows a hardware platform to automatically analyze the requirements and
prefetch data and codes for the CPU.
[Disabled]
Disables this function.
Adjacent Cache Line Prefetch [Enabled]
[Enabled]
Allows a hardware platform to perform adjacent cache line prefetching.
[Disabled]
Disables this function.
Boot performance mode [Max Non-Tu...]
This item allows you to select the boot performance mode. Configuration options: [Max NonTurbo Performance] [Max battery] [Turbo Performance]
CPU Power Management Configuration
This item allows you to manage and configure the CPU’s power.
EIST [Enabled]
Allows you to enable or disable the Enhanced Intel® SpeedStep Technology (EIST).
[Disabled]
The CPU runs at its default speed.
[Enabled]
The operating system controls the CPU speed.
2-26
Chapter 2: Getting started
Turbo Mode [Enabled]
Allows you to set the processor cores to run faster than the marked frequency in a
specific condition. Configuration options: [Enabled] [Disabled]
Turbo Mode is only available on selected CPU models only.
CPU C states [Enabled]
[Auto]
Automatic configuration.
[Enabled]
Enables the CPU C states.
[Disabled]
Disables the CPU C states.
The following items appear only when you set the CPU C states to [Enabled].
Enhanced C1 state [Enabled]
[Enabled]
Enables enhanced C1 state.
[Disabled]
Disables enhanced C1 state.
CPU C3 Report [Enabled]
Allows you to disable or enable the CPU C3 report to OS. Configuration options:
[Enabled] [Disabled]
CPU C6 Report [Enabled]
Allows you to disable or enable the CPU C6 report to OS. Configuration options:
[Enabled] [Disabled]
C6 Latency [Short]
Allows you to choose short or long latency for C6. Configuration options: [Short] [Long]
CPU C7 Report [CPU C7s]
Allows you to disable or enable the CPU C7 report to OS. Configuration options:
[Disabled] [CPU C7] [CPU C7s]
C7 Latency [Long]
Allows you to choose short or long latency for C6. Configuration options: [Short] [Long]
Package C State Support [Auto]
Allows you to disable or enable the whole C-State package support. Configuration
options: [Auto] [Enabled] [C0/C1] [C2] [C3] [C6] [CPU C7] [CPU C7s]
2.6.2
PCH Configuration
PCI Express Configuration
DMI Link ASPM Control [Auto]
Allows you to control the Active State Power Managemennt on both NB and SB side of
the DMI Link. Configuration options: [Auto] [Enabled] [Disabled]
ASPM Support [Disabled]
Allows you to set the ASPM support. Configuration options: [Disabled] [Auto] [L0s] [L1]
L0sL1].
ASUS VANGUARD B85
2-27
PCIe Speed [Auto]
Allows you to select the PCI Express port speed. Configuration options: [Auto] [Gen1]
[Gen2]
Intel® Rapid Start Technology
Intel® Rapid Start Technology [Disabled]
Allows you to enable or disable Intel® Rapid Start Technology. Configuration options:
[Enabled] [Disabled]
The following items appear only when you set the Intel® Rapid Start Technology to
[Enabled].
Entry on S3 RTC Wake [Enabled]
The system automatically wakes up and set to Rapid Start Technology S4 mode.
Configuration options: [Enabled] [Disabled]
Entry After [0]
Allows you to set the wake-up time.The values range from 0 (immediately) to 120.
Active Page Threshold Support [Enabled]
The system automatically set itself to sleep when the partition size is not enough for
Rapid Start Technology to work. Configuration options: [Enabled] [Disabled]
Active Memory Threshold [0]
Key in the value for the additional partition size for Rapid Start Technology to work.
Ensure that the caching partition size is larger than the total memory size.
Hybrid Hard Disk Support [Disabled]
Allows you to enable or disable hybrid hard disk support.
Configuration options: [Enabled] [Disabled]
Intel® Smart Connect Technology [Disabled]
ISCT Configuration [Disabled]
Allows you to enable or disable the ISCT configuration. Configuration options:
[Enabled] [Disabled]
2.6.3
SATA Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Not Present if no SATA device is installed to the corresponding SATA
port.
2-28
Chapter 2: Getting started
SATA Mode Selection [AHCI]
Allows you to set the SATA configuration.
[Disabled]
Disables the SATA function.
[IDE]
Set to [IDE] when you want to use the Serial ATA hard disk drives as
Parallel ATA physical storage devices.
[AHCI]
Set to [AHCI] when you want the SATA hard disk drives to use the AHCI
(Advanced Host Controller Interface). The AHCI allows the onboard storage
driver to enable advanced Serial ATA features that increases storage
performance on random workloads by allowing the drive to internally
optimize the order of commands.
Aggressive LPM Support [Auto]
This item appears only when you set the previous item to [AHCI] and allows you to enable or
disable PCH entering link power state aggressively. Configuration options: [Auto] [Disabled]
[Enabled]
IDE Legacy / Native Mode Selection [Native]
This item appears only when you set the SATA Mode Selection item to [IDE]. Configuration
options: [Native] [Legacy]
S.M.A.R.T. Status Check [Enabled]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When
read/write of your hard disk errors occur, this feature allows the hard disk to report warning
messages during the POST. Configuration options: [Enabled] [Disabled]
Hot Plug [Disabled] (SATA 6G 1~4 [Brown], SATA 3G 5~6 [Black])
These items appear only when you set the SATA Mode Selection item to [AHCI] and allow
you to enable/disable SATA Hot Plug Support.Configuration options: [Disabled] [Enabled]
2.6.4
System Agent Configuration
CPU Audio Device [Enabled]
Allows you to enable or disable CPU SA Audio Device. Configuration options: [Enabled]
[Disabled]
DVI Port Audio [Disabled]
Allows you to enable or disable the DVI port. Configuration options: [Enabled] [Disabled]
Graphics Configuration
Allows you to select a primary display from iGPU, and PCIe graphical devices.
Primary Display [Auto]
Allows you to select which of the iGPU/PCIE Graphics device should be the Primary
Display. Configuration options: [Auto] [IGPU] [PCIE] [PCI]
iGPU Memory [Auto]
Allows you to select the amount of system memory allocated to DVMT 5.0 used by the
iGPU. Configuration options: [Auto] [32M] [64M] [96M] [128M] [160M] [192M] [224M]
[256M] [288M][320M] [352M] [384M] [416M] [448M] [480M] [512M] [1024M]
ASUS VANGUARD B85
2-29
Render Standby [Auto]
Allows you to enable or disable Intel® Graphics Render Standby support to reduce
iGPU power use when the system is idle. Configuration options: [Auto] [Disabled]
[Enabled]
iGPU Multi-Monitor [Disabled]
Allows you to enable the iGPU Multi-Monitor. For LucidLogix Virtu MVP function
support, set this item to [Enabled] to empower both integrated and discrete graphics.
The iGPU shared system memory size will be fixed at 64MB.
Configuration options: [Disabled] [Enabled]
DMI Configuration
Allows you to control various DMI functions.
DMI Gen 2 [Auto]
Allows you to enable or disable DMI Gen 2. Configuration options: [Auto] [Enabled]
[Disabled]
NB PCIe Configuration
Allows you to configure the NB PCI Express settings.
PCIEX16_1 Link Speed [Auto]
Allows you to configure the PCIEX16_1 speed.
Configuration options: [Auto] [Gen1] [Gen2] [Gen3]
DMI Link ASPM Control [Auto]
Allows you to enable or disable the control of Active State Power Management on SA
side of the DMI Link. Configuration options: [Auto] [Disabled] [L0s] [L1] [L0sL1]
PEG - ASPM [Disabled]
Allows you to control ASPM support for the PEG Device. The setting takes no effect if
PEG is not the active device at present. Configuration options: [Disabled] [Auto] [ASPM
L0s] [ASPM L1] [ASPM L0sL1]
Memory Configuration
Memory Scrambler [Enabled]
Allows you to enable or disable Memory Scrambler support.
Memory Remap [Enabled]
Allows you to enable or disable remapping the memory above 4GB.
[Enabled]
Enables the function.
[Disabled]
2.6.5
Disables this function.
AMT Configuration
The items in this menu allow you to change the Intel® Active Management Technology (AMT)
feature.
Intel® AMT [Enabled]
Allow you to enable or disable the Intel® Active Management Technology (AMT) in the BIOS
extension. Configuration options: [Enabled] [Disabled]
2-30
Chapter 2: Getting started
•
iAMT H/W is always enabled. This option just controls the BIOS extension execution.
If enabled, this requires additional firmware in the SPI device.
•
The following two items become configurable only when you set the Intel®AMT item to
[Enabled].
BIOS Hotkey Pressed [Disabled]
This item become configurable only when the previous item is set to [Enabled] and allows
you to enable or disable this function. Configuration options: [Enabled] [Disabled]
Un-Configure ME [Disabled]
Sets this item to [Disabled] to unconfigure AMT/ME without using a password or set it to
[Enabled] to use a password. Configuration options: [Enabled] [Disabled]
2.6.6
USB Configuration
The items in this menu allow you to change the USB-related features.
The USB Devices item shows the auto-detected values. If no USB device is detected, the
item shows None.
Legacy USB Support [Enabled]
[Enabled]
Enables the support for USB devices on legacy operating systems (OS).
[Disabled]
The USB devices can be used only for the BIOS setup program.
[Auto] Allows the system to detect the presence of USB devices at startup. If
detected, the USB controller legacy mode is enabled. If no USB device is
detected, the legacy USB support is disabled.
Intel® xHCI Mode [Smart Auto]
[Auto]
Keeps the last operation of xHCI controller in OS during bootup.
[Smart Auto]
Enables the operation of xHCI controller.
[Enabled]
Enables the function.
[Disabled]
Disables the function.
EHCI Hand-off [Disabled]
[Enabled]
Enables the support for operating systems without an EHCI hand‑off
feature.
[Disabled]
Disables the function.
USB Single Port Control
USB3_1/2/5/E2/E3/E4 [Enabled]
Allows you to enable or disable an individual USB port. Refer to the section 1.2.3
Motherboard layout in this user manual for the locations of the USB ports.
Configuration options: [Enabled] [Disabled].
ASUS VANGUARD B85
2-31
USB3, 4, 9~14 [Enabled]
Allows you to enable or disable an individual USB port. Refer to the section 1.2.3
Motherboard layout in this user manual for the locations of the USB ports.
Configuration options: [Enabled] [Disabled].
2.6.7
Platform Misc Configuration
The items in this menu allow you to configure the Platform Misc.
PCI Express Native Power Management [Disabled]
Allows you to enable or disable PCIE express native power management. Configuration
options: [Enabled] [Disabled]
Native ASPM [Disabled]
The item appears only when you set the previous item to [Enabled] and allows you to enable
or disable ASPM. Configuration options: [Enabled] [Disabled]
2.6.8
Onboard Devices Configuration
HD Audio Controller [Enabled]
[Enabled]
Enables the HD Audio Device.
[Disabled]
Disables the HD Audio Device.
The following item appears only when you set the HD Audio Controller item to [Enabled].
Front Panel Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or highdefinition audio depending on the audio standard that the front panel audio module supports.
[HD Audio]
Sets the front panel audio connector (AAFP) mode to high definition audio.
[AC97]
Sets the front panel audio connector (AAFP) mode to legacy AC’97
SPDIF Out Type [SPDIF]
[SPDIF]
Sets to an SPDIF audio output.
[HDMI]
Sets to an HDMI audio output.
Realtek LAN Controller [Enabled]
[Enabled]
Enables the Realtek LAN controller.
[Disabled]
Disables the controller.
Realtek PXE Option ROM [Disabled]
This item appears only when you set the previous item to [Enabled] and allows you to
enable or disable the PXE Option ROM of the Realtek LAN controller. Configuration options:
[Enabled] [Disabled]
Serial Port Configuration
The sub-items in this menu allow you to set the serial port configuration.
2-32
Chapter 2: Getting started
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM).Configuration options: [Enabled]
[Disabled]
Change Settings [IO=3F8h; IRQ=4]
This item appears only when you set the Serial Port to [Enabled] and allows you
to select the Serial Port base address. Configuration options: [IO=3F8h; IRQ=4]
[IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3]
2.6.9
APM
ErP Ready [Disabled]
Allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP
requirement. When set to [Enabled], all other PME options will be switched off. Configuration
options: [Disabled] [Enabled]
Restore AC Power Loss [Power Off]
[Power On]
The system goes into on state after an AC power loss.
[Power Off]
The system goes into off state after an AC power loss.
[Last State]
The system goes into either off or on state, whatever the system state was
before the AC power loss.
Power On By PS/2 Keyboard [Disabled]
[Disabled]
Disables the Power On by a PS/2 keyboard.
[Space Bar]
Sets the Space Bar on the PS/2 keyboard to turn on the system.
[Ctrl-Esc]
Sets the Ctrl+Esc key on the PS/2 keyboard to turn on the system.
[Power Key]
Sets Power key on the PS/2 keyboard to turn on the system. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Power On By PS/2 Mouse [Disabled]
[Disabled]
Disables the Power On by a PS/2 mouse.
[Enabled]
Enables the Power On by a PS/2 mouse. This feature requires an ATX
power supply that provides at least 1A on the +5VSB lead.
Power On By PCI-E/PCI [Disabled]
[Disabled]
Disables the PCI-E/PCI devices to generate a wake-on-LAN feature of the
Intel®/Realtek LAN device.
[Enabled]
Enables the PCI-E/PCI devices to generate a wake-on-LAN feature of the
Intel®/Realtek LAN device.
Power On By Ring [Disabled]
[Disabled]
Disables Ring to generate a wake event.
[Enabled]
Enables Ring to generate a wake event.
Power On By RTC [Disabled]
[Disabled]
Disables RTC to generate a wake event.
[Enabled]
When set to [Enabled], the items RTC Alarm Date (Days) and Hour/
Minute/Second will become user-configurable with set values.
ASUS VANGUARD B85
2-33
2.6.10
Network Stack
Network Stack [Disabled]
This item allows user to disable or enable the UEFI network stack. Configuration options:
[Disabled] [Enabled]
The following two items appear only when you set the previous item to [Enabled].
Ipv4 PXE Support [Enabled]
This item allows user to disable or enable the Ipv4 PXE Boot support. Configuration options:
[Disable Link] [Enabled]
Ipv6 PXE Support [Enabled]
This item allows user to disable or enable the Ipv6 PXE Boot support. Configuration options:
[Disable Link] [Enabled]
2.7
Monitor menu
The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
Scroll down to display the other items.
2.7.1
CPU Temperature / MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the CPU and motherboard
temperatures. Select Ignore if you do not wish to display the detected temperature.
2-34
Chapter 2: Getting started
2.7.2
CPU / Chassis Fan1/2/3/4 Speed [xxxx RPM] or
[Ignore] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU / chassis fan
speeds in rotations per minute (RPM). If the fan is not connected to the motherboard, the field
shows N/A. Select Ignore if you do not wish to display the detected speed.
2.7.3
CPU Core 0/1/2/3 Voltage, 3.3V Voltage, 5V Voltage,
12V Voltage
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators. Select Ignore if you do not want to detect this item.
2.7.4
CPU Q-Fan Control [Auto]
[Disabled]
Disables the CPU Q-Fan control feature.
[Auto]
Enables the CPU Q-Fan control for 4-pin CPU fan.
[Advance Mode]Select this mode for the DC mode Q-Fan control when a 3-pin CPU fan is
installed.
CPU Fan Speed Low Limit [200 RPM]
This item appears only when you enable the CPU Q-Fan Control feature and allows you to
disable or set the CPU fan warning speed.
Configuration options: [Ignore] [100RPM] [200RPM] [300 RPM] [400 RPM] [500 RPM]
CPU Fan Profile [Standard]
This item appears only when you enable the CPU Q-Fan Control feature and allows you to
set the appropriate performance level of the CPU fan.
[Standard]
Sets to [Standard] to make the CPU fan automatically adjust depending on
the CPU temperature.
[Silent]
Sets to [Silent] to minimize the fan speed for quiet CPU fan operation.
[Turbo]
Sets to [Turbo] to achieve maximum CPU fan speed.
[Manual]
Sets to [Manual] to assign detailed fan speed control parameters.
The following four items appear only when you set CPU Fan Profile to [Manual].
CPU Upper Temperature [70]
Use the <+> and <-> keys to adjust the upper limit of the CPU temperature. The values
range from 20ºC to 75ºC.
CPU Fan Max. Duty Cycle(%) [100]
Use the <+> and <-> keys to adjust the maximum CPU fan duty cycle. The values
range from 20% to 100%. When the CPU temperature reaches the upper limit, the
CPU fan will operate at the maximum duty cycle.
CPU Lower Temperature [20]
Displays the lower limit of the CPU temperature.
ASUS VANGUARD B85
2-35
CPU Fan Min. Duty Cycle(%) [20]
Use the <+> and <-> keys to adjust the minimum CPU fan duty cycle. The values
range from 20% to 100%. When the CPU temperature is under the lower limit, the CPU
fan will operate at the minimum duty cycle.
2.7.5
Chassis Fan 1/2/3/4 Q-Fan Control [Enabled]
[Disabled]
Disables the Chassis fan 1/2/3/4 Q-Fan control feature.
[Enabled]
Enables the Chassis fan 1/2/3/4 Q-Fan control feature.
Chassis Fan 1/2/3/4 Speed Low Limit [600 RPM]
This item appears only when you enable the Chassis Fan Q-Fan Control feature and allows
you to disable or set the chassis fan warning speed.
Configuration options: [Ignore] [200RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
Chassis Fan 1/2/3/4 Profile [Standard]
This item appears only when you enable the Chassis Fan 1/2/3/4 Q-Fan Control feature and
allows you to set the appropriate performance level of the chassis fan 1/2/3/4.
[Standard]
Sets to [Standard] to make the chassis fan automatically adjust depending
on the chassis temperature.
[Silent]
Sets to [Silent] to minimize the fan speed for quiet chassis fan operation.
[Turbo]
Sets to [Turbo] to achieve maximum chassis fan speed.
[Manual]
Sets to [Manual] to assign detailed fan speed control parameters.
The following four items appear only when you set Chassis Fan 1/2/3/4 Profile to [Manual].
Chassis Fan 1/2/3/4 Upper Temperature [70]
Use the <+> and <-> keys to adjust the upper limit of the Chassis temperature. The
values range from 40ºC to 75ºC.
Chassis Fan 1/2/3/4 Max. Duty Cycle(%) [100]
Use the <+> and <-> keys to adjust the maximum chassis fan 1/2/3/4 duty cycle. The
values range from 60% to 100%. When the chassis temperature reaches the upper
limit, the chassis fan 1/2/3/4 will operate at the maximum duty cycle.
Chassis Fan 1/2/3/4 Lower Temperature [40]
Displays the lower limit of the chassis temperature.
CHASSIS Fan 1/2/3/4 Min. Duty Cycle(%) [60]
Use the <+> and <-> keys to adjust the minimum chassis fan duty cycle. The values
range from 60% to 100%. When the chassis temperature is under 40ºC, the chassis
fan will operate at the minimum duty cycle.
2.7.6
Anti Surge Support [Enabled]
This item allows you to enable or disable the Anti Surge function. Configuration options:
[Disabled] [Enabled]
2-36
Chapter 2: Getting started
2.7.7
Chassis Intrusion Detection Support [Enabled]
Connect one end of the chassis intrusion sensor or switch cable to the chassis instrusion
connector. The chassis intrusion sensor or switch cable sends high-level signal to the
connector when a chassis component is removed or replaced. The signal is then generated
as a chassis intrusion event. Configuration options: [Disabled] [Enabled]
2.8
Boot menu
2.8.1
Fast Boot [Enabled]
The Boot menu items allow you to change the system boot options.
[Enabled]
Select to accelerate the boot speed.
[Disabled]
Select to go back to normal boot.
The following four items appear when you set Fast Boot to [Enabled].
SATA Support [All Devices]
[All Devices]All devices connected to SATA ports will be available during
POST. This process will extend the POST time.
[Hard Drive Only]Only hard drives connected to SATA ports will be detected during
POST. Any hardware change will disable fast boot.
[Boot Drive Only]Only boot drive connected to SATA ports will be detected during
POST. Any hardware change will disable fast boot.
ASUS VANGUARD B85
2-37
USB Support [Partial Initialization]
[Disabled]All USB devices will not be available until OS boot up for a
fastest POST time.
[Full Initialization]All USB devices will be available during POST. This process will
extend the POST time.
[Partial Initialization]For a faster POST time, only the USB ports with keyboard and
mouse connections will be detected.
PS/2 Keyboard and Mouse Support [Auto]
Select any of these settings when PS/2 keyboard and mouse are installed. These settings
only apply when Fast Boot is enabled.
[Auto]
For a faster POST time, PS/2 devices will only be available when the
system boots up or rebooted when the PS/2 devices have not been
reconnected or changed. If you disconnect or change PS/2 devices before
restarting the system, PS/2 devices will not be available and BIOS setup
program will not be accessible via PS/2 devices.
[Full Initialization]For full system control, PS/2 devices will be available during POST at any
circumstances. This process will extend POST time.
[Disabled]
For the fastest POST time, all PS/2 devices will not be available until your
computer enters the operating system.
Network Stack Driver Support [Disabled]
[Disabled]
Select to skip the network stack driver from loading during POST.
[Enabled]
Select to load the network stack driver during POST.
Next Boot after AC Power Loss [Normal Boot]
[Normal Boot]
Returns to normal boot on the next boot after AC power loss.
[Fast Boot]
Accelerates the boot speed on the next boot after AC power loss.
2.8.2
HW Fast Boot [Disabled]
Allows the system to enable or disable the HW Fast Boot. Configuration options: [Disabled]
[Enabled]
2.8.3
Boot Logo Display [Auto]
[Auto]
Adjust automatically for Windows® requrement.
[Full Screen]
Maximize the boot logo size.
[Disabled]
Hide the logo during POST.
POST Delay Time [3 sec]
This item appears only when you set Boot Logo Display to [Auto] or [Full Screen]. This item
allows you to select the desired additional POST waiting time to easily enter the BIOS setup.
You can only execute the POST delay time during Normal Boot. Configuration options: [1 sec]
~ [10 sec] [Until Press ESC].
This feature will only work under normal boot.
2-38
Chapter 2: Getting started
Post Report [5 sec]
This item appears only when you set Boot Logo Display to [Disabled]. This item allows you
to select a desired post report waiting time. The values range from 1 to 10 seconds.
2.8.4
Bootup NumLock State [On]
[On]
Sets the power-on state of the NumLock to [On].
[Off]
Sets the power-on state of the NumLock to [Off].
2.8.5
Wait for ‘F1’ If Error [Enabled]
When this item is set to [Enabled], the system waits for the F1 key to be pressed when error
occurs. Configuration options: [Disabled] [Enabled]
2.8.6
Option ROM Messages [Force BIOS]
[Force BIOS]
The third-party ROM messages will be forced to display during the boot
sequence.
[Keep Current]
The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
2.8.7
Interrupt 19 Capture [Disabled]
[Enabled]
Allows the option ROMs to trap Interrupt 19.
[Disabled]
Disables this function.
2.8.8
Setup Mode [EZ Mode]
[Advanced Mode] Sets Advanced Mode as the default screen for entering the BIOS setup
program.
[EZ Mode]
2.8.9
Sets EZ Mode as the default screen for entering the BIOS setup program.
CSM (Compatibility Support Module)
Allows you to configure the CSM (Compatibility Support Module) items to fully support the
various VGA, bootable devices and add-on devices for better compatibility.
Launch CSM [Enabled]
[Auto]The system automatically detects the bootable devices and the add-on
devices.
[Enabled]For better compatibility, enable the CSM to fully support the non-UEFI
driver add-on devices or the Windows® UEFI mode.
[Disabled]Disable the CSM to fully support the Windows® Security Update and
Security Boot.
The following four items appear when you set Launch CSM to [Enabled].
ASUS VANGUARD B85
2-39
Boot Devices Control [UEFI and L...]
Allows you to select the type of devices that you want to boot up. Configuration options:
[UEFI and Legacy OPROM] [Legacy OPROM only] [UEFI only]
Boot from Network Devices [Legacy OPR...]
Allows you to select the type of network devices that you want to launch. Configuration
options: [Legacy OPROM first] [UEFI driver first] [Ignore]
Boot from Storage Devices [Legacy OPR...]
Allows you to select the type of storage devices that you want to launch. Configuration
options: [Both, Legacy OPROM first] [Both, UEFI first] [Legacy OPROM first] [UEFI driver
first] [Ignore]
Boot from PCI-E/PCI Expansion Devices [Legacy OPR...]
Allows you to select the type of PCI-E/PCI expansion devices that you want to launch.
Configuration options: [Legacy OPROM first] [UEFI driver first]
2.8.10
Secure Boot
Allows you to configure the Windows® Secure Boot settings and manage its keys to protect
the system from unauthorized access and malwares during POST.
OS Type [Windows UE...]
Allows you to select your installed operating system.
[Windows UEFI mode]Executes the Microsoft® Secure Boot check. Only select this
option when booting on Windows® UEFI mode or other Microsoft®
Secure Boot compliant OS.
[Other OS]Get the optimized function when booting on Windows® non-UEFI
mode, Windows® Vista/XP, or other Microsoft® Secure Boot
non-compliant OS. Only on Windows® UEFI mode that Microsoft®
Secure Boot can function properly.
The following item appears when OS Type is set to [Windows UEFI mode].
Key Management
This item appears only when you set OS Type to [Windows UEFI mode]. It allows you
to manage the Secure Boot keys.
Install Default Secure Boot keys
Allows you to immediately load the default Security Boot keys, Platform key
(PK), Key-exchange Key (KEK), Signature database (db), and Revoked
Signatures (dbx). When the default Secure boot keys are loaded, the PK
state will change from Unloaded mode to loaded mode.
Clear Secure Boot keys
This item appears only when you load the default Secure Boot keys. This
item allows you to clear all default Secure Boot keys.
Save Secure Boot Keys
Allows you to save the PK (Platform Keys) to a USB storage device.
2-40
Chapter 2: Getting started
PK Management
The Platform Key (PK) locks and secures the firmware from any non-permissible
changes. The system verifies the PK before your system enters the OS.
Delete PK
Allows you to delete the PK from your system. Once the PK is deleted, all
the system’s Secure Boot keys will not be active. Configuration options:
[Yes] [No]
Load PK from File
Allows you to load the downloaded PK from a USB storage device.
The PK file must be formatted as a UEFI variable structure with time-based authenticated
variable.
KEK Management
The KEK (Key-exchange Key or Key Enrollment Key) manages the Signature database
(db) and Revoked Signature database (dbx).
Key-exchange Key (KEK) refers to Microsoft® Secure Boot Key-Enrollment Key (KEK).
Delete the KEK
Allows you to delete the KEK from your system. Configuration options:
[Yes] [No]
Load KEK from File
Allows you to load the downloaded KEK from a USB storage device.
Append KEK from file
Allows you to load the additional KEK from a storage device for an
additional db and dbx loaded management.
The KEK file must be formatted as a UEFI variable structure with time-based authenticated
variable.
DB Management
The db (Authorized Signature database) lists the signers or images of UEFI
applications, operating system loaders, and UEFI drivers that you can load on the
single computer.
Delete the db
Allows you to delete the db file from your system. Configuration options:
[Yes] [No]
Load db from File
Allows you to load the downloaded db from a USB storage device.
Append db from file
Allows you to load the additional db from a storage device so that more
images can be loaded securely.
The DB file must be formatted as a UEFI variable structure with time-based authenticated
variable.
ASUS VANGUARD B85
2-41
DBX Management
The dbx (Revoked Signature database) lists the forbidden images of db items that are
no longer trusted and cannot be loaded.
Delete the dbx
Allows you to delete the DBX file from your system. Configuration options:
[Yes] [No]
Load dbx from File
Allows you to load the downloaded DBX from a USB storage device.
Append dbx from file
Allows you to load the additional DBX from a storage device so that more
db’s images cannot be loaded.
The DBX file must be formatted as a UEFI variable structure with time-based authenticated
variable.
2.8.11
Boot Option Priorities
These items specify the boot device priority sequence from the available devices. The
number of device items that appears on the screen depends on the number of devices
installed in the system.
•
•
2.8.12
To select the boot device during system startup, press <F8> when ASUS Logo
appears.
To access Windows OS in Safe Mode, do any of the following:
•
Press <F5> when ASUS Logo appears.
•
Press <F8> after POST.
Hard Drive BBS Priorities
Allows you to set the order of the legacy devices in this group.
2.8.13
Boot Override
These items displays the available devices. The number of device items that appear on
the screen depends on the number of devices installed in the system. Click an item to start
booting from the selected device.
2-42
Chapter 2: Getting started
2.9
Tools menu
2.9.1
ASUS EZ Flash 2 Utility
The Tools menu items allow you to configure options for special functions. Select an item
then press <Enter> to display the submenu.
Allows you to run ASUS EZ Flash 2. Press [Enter] to launch the ASUS EZ Flash 2 screen.
For more details, see section 2.1.2 ASUS EZ Flash 2.
2.9.2
ASUS Overclocking Profile
This item allows you to store or load multiple BIOS settings.
The Setup Profile Status items show Not Installed if no profile is created.
Profile Name
Allows you to key in a profile name.
Save to Profile
Allows you to save the current BIOS settings to the BIOS Flash, and create a profile. Key in a
profile number from one to eight, press <Enter>, and then select Yes.
Load from Profile
Allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the profile
number that saved your CMOS settings, press <Enter>, and then select Yes.
•
DO NOT shut down or reset the system while updating the BIOS to prevent the
system boot failure!
•
We recommend that you update the BIOS file only coming from the same memory/
CPU configuration and BIOS version.
Load/Save CMOS Profile from/to USB Drive
Allows you to load/save CMOS profile from/to USB drive.
2.9.3
ASUS SPD Information
DIMM Slot # [Slot 1]
Displays the Serial Presence Detect (SPD) information of the DIMM module installed on the
selected slot. Configuration options: [Slot 1] [Slot 2] [Slot 3] [Slot 4]
ASUS VANGUARD B85
2-43
2.10
Exit menu
The Exit menu items allow you to load the optimal default values for the BIOS items, and
save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit
menu.
Load Optimized Defaults
This option allows you to load the default values for each of the parameters on the Setup
menus. When you select this option or if you press <F5>, a confirmation window appears.
Select Yes to load the default values.
Save Changes & Reset
Once you are finished making your selections, choose this option from the Exit menu to
ensure the values you selected are saved. When you select this option or if you press <F10>,
a confirmation window appears. Select Yes to save changes and exit.
Discard Changes & Exit
This option allows you to exit the Setup program without saving your changes. When you
select this option or if you press <Esc>, a confirmation window appears. Select Yes to discard
changes and exit.
ASUS EZ Mode
This option allows you to enter the EZ Mode screen.
Launch EFI Shell from filesystem device
This option allows you to attempt to launch the EFI Shell application (shellx64.efi) from one of
the available devices that have a filesystem.
2-44
Chapter 2: Getting started
Appendices
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
•
This device may not cause harmful interference.
•
This device must accept any interference received including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with manufacturer’s instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is required
to assure compliance with FCC regulations. Changes or modifications to this unit not
expressly approved by the party responsible for compliance could void the user’s authority
to operate this equipment.
IC: Canadian Compliance Statement
Complies with the Canadian ICES-003 Class B specifications. This device complies with RSS
210 of Industry Canada. This Class B device meets all the requirements of the Canadian
interference-causing equipment regulations.
This device complies with Industry Canada license exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Cut appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.
Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
Cet appareil est conforme aux normes CNR exemptes de licence d’Industrie Canada. Le
fonctionnement est soumis aux deux conditions suivantes :
(1) cet appareil ne doit pas provoquer d’interférences et
(2) cet appareil doit accepter toute interférence, y compris celles susceptibles de provoquer
un fonctionnement non souhaité de l’appareil.
VANGUARD B85
A-1
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian Department
of Communications.
This class B digital apparatus complies with Canadian ICES-003.
VCCI: Japan Compliance Statement
VCCI Class B Statement
KC: Korea Warning Statement
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of
Chemicals) regulatory framework, we published the chemical substances in our products at
ASUS REACH website at http://csr.asus.com/english/REACH.htm.
DO NOT throw the motherboard in municipal waste. This product has been designed to
enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin
indicates that the product (electrical and electronic equipment) should not be placed in
municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol
of the crossed out wheeled bin indicates that the battery should not be placed in municipal
waste.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards
for protecting our environment. We believe in providing solutions for you to be able to
responsibly recycle our products, batteries, other components as well as the packaging
materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling
information in different regions.
A-2
Appendices
ASUS contact information
ASUSTeK COMPUTER INC.
Address
Telephone Fax E-mail
Web site
Technical Support
Telephone Online support
15 Li-Te Road, Peitou, Taipei, Taiwan 11259
+886-2-2894-3447
+886-2-2890-7798
info@asus.com.tw
www.asus.com.tw
+86-21-38429911
support.asus.com
ASUS COMPUTER INTERNATIONAL (America)
Address
Telephone
Fax
Web site
Technical Support
Telephone Support fax
Online support
800 Corporate Way, Fremont, CA 94539, USA
+1-812-282-3777
+1-510-608-4555
usa.asus.com
+1-812-282-2787
+1-812-284-0883
support.asus.com
ASUS COMPUTER GmbH (Germany and Austria)
Address
Fax
Web site
Online contact
Technical Support
Telephone
Support Fax
Online support
Harkort Str. 21-23, D-40880 Ratingen, Germany
+49-2102-959911
www.asus.de
www.asus.de/sales
+49-1805-010923*
+49-2102-9599-11
support.asus.com
* EUR 0.14/minute from a German fixed landline; EUR 0.42/minute from a mobile phone.
Manufacturer:
ASUSTeK Computer Inc.
Address:
4F, No. 150, LI-TE RD., PEITOU, TAIPEI 112,
TAIWAN R.O.C.
Authorised representative in
Europe:
ASUS Computer GmbH
Address:
HARKORT STR. 21-23, 40880 RATINGEN,
GERMANY
VANGUARD B85
A-3
A-4
Appendices
(510)739-3777/(510)608-4555
800 Corporate Way, Fremont, CA 94539.
Asus Computer International
Date :
Signature :
Representative Person’s Name :
Aug. 07, 2013
Steve Chang / President
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Supplementary Information:
FCC Part 15, Subpart B, Unintentional Radiators
Conforms to the following specifications:
Model Number : VANGUARD B85
Product Name : Motherboard
hereby declares that the product
Phone/Fax No:
Address:
Responsible Party Name:
Per FCC Part 2 Section 2. 1077(a)
DECLARATION OF CONFORMITY
Ver. 120601
Manufacturer:
TAIWAN
ASUS COMPUTER GmbH
HARKORT STR. 21-23, 40880 RATINGEN
GERMANY
Country:
Authorized representative in Europe:
Address, City:
Country:
VANGUARD B85
Model name :
Year to begin affixing CE marking:2013
Declaration Date: 07/08/2013
CE marking
2011/65/EU-RoHS Directive
Regulation (EC) No. 642/2009
Regulation (EC) No. 1275/2008
2009/125/EC-ErP Directive
EN 60950-1 / A12:2011
2006/95/EC-LVD Directive
EN 300 328 V1.7.1(2006-10)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V5.2.1(2011-05)
EN 301 908-2 V5.2.1(2011-07)
EN 301 893 V1.6.1(2011-11)
EN 302 544-2 V1.1.1(2009-01)
EN 302 623 V1.1.1(2009-01)
EN 50360:2001
EN 62479:2010
EN 50385:2002
EN 62311:2008
1999/5/EC-R &TTE Directive
EN 55022:2010
EN 61000-3-2:2006+A2:2009
EN 55013:2001+A1:2003+A2:2006
2004/108/EC-EMC Directive
Name :
Signature : __________
CEO
Jerry Shen
Position :
(EC conformity marking)
Regulation (EC) No. 278/2009
EN 60065:2002 / A12:2011
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.4.1(2002-08)
EN 301 489-4 V1.4.1(2009-05)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.1.1(2009-05)
EN 301 489-24 V1.5.1(2010-09)
EN 302 326-2 V1.2.2(2007-06)
EN 302 326-3 V1.3.1(2007-09)
EN 301 357-2 V1.4.1(2008-11)
EN 302 291-1 V1.1.1(2005-07)
EN 302 291-2 V1.1.1(2005-07)
EN 55024:2010
EN 61000-3-3:2008
EN 55020:2007+A11:2011
conform with the essential requirements of the following directives:
Motherboard
Product name :
declare the following apparatus:
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Address, City:
ASUSTeK COMPUTER INC.
EC Declaration of Conformity
We, the undersigned,
Ver. 130208