Compaq BL40p - ProLiant - 1 GB RAM QuickSpecs

QuickSpecs
HP ProLiant BL40p Server Blade
Overview
42U Rack with ProLiant BL p-Class System Installed
1. BL p-Class Interconnects (2) in BL p-Class server blade enclosure (interconnect switch shown)
2. BL40p server blades (2) in BL p-Class server blade enclosure
3. BL p-Class power enclosure with hot-plug power supplies (6)
What's New
Intel® Xeon MP FC-PGA 2.8 GHz\2MB or 2.0 GHz\1MB processor (quad capability)
GbE2 Interconnect Switch option for Gigabit Ethernet network adapter consolidation and future layer 3-7 and 10 Gigabit Ethernet expandability
ProLiant BL40p server blade includes:
Intel Xeon MP FC-PGA 2.8GHz\2MB, 2.0GHz\1MB, 2.0 GHz\2MB or 1.50 GHz\1MB processor (quad capability)
ServerWorks GC-LE Chipset
512-MB or 1024 MB of 2-way interleaved PC2100 ECC DDR (2 x 1 Interleaved Memory), expandable to 12 GB
Advanced Memory Protection with Online Spare
Five NC7781 PCI-X Gigabit NICs (embedded) standard
One additional 10/100T NIC dedicated to Integrated Lights-Out (iLO) Management
Smart Array 5i Plus Controller with battery-backed write cache (integrated on system board) standard on 2.8GHz/2M and 2.0GHz/2M models,
optional on 1.5GHz/1M and 2.0GHz/1M models
Wide Ultra3 SCSI Drive Cage standard supports up to four 1" hot plug hard drives
Two PCI-X slots (64b/100MHz capable) for redundant SAN connectivity
Integrated Lights-Out (iLO) Management (ASIC on motherboard)
Plugs vertically into p-Class server enclosure
Up to 12 BL40p blades fit in 42U rack
DA - 11562
North America — Version 10 — September 8, 2003
Page 1
QuickSpecs
HP ProLiant BL40p Server Blade
Overview
What's Needed
ProLiant BL p-Class Server Blade Enclosure:
Server blades and interconnects slide into p-Class server blade enclosures for network connection and power
Server blade enclosure is 6U high and 10 bays across. The server blade enclosure bays consist of 2 (outer) interconnect bays and 8 server bays. One
server blade enclosure can hold up to 2 ProLiant BL40p server blades and 2 interconnects
2 types of interconnects available:
interconnect switches or patch panels
ProLiant BL p-Class Power Enclosure:
Use BL p-Class sizing tool to determine power based on your configuration
http://h30099.www3.hp.com/configurator/powercalcs.asp
NOTE: This Web site is available in English only.
BL p-Class power enclosure provides shared, external, redundant power
Power enclosure is 3U high and holds up to 6 hot-plug power supplies
Available in single-phase or three-phase power configurations
BL p-Class power enclosure with power supplies not needed if using facility DC (-48VDC ± 10%). In this case purchase DC option kit
ProLiant BL p-Class Power Distribution:
Distributes power from the power enclosure to the server blade enclosures
Three power distribution choices:
BL p-Class scalable bus bar
BL p-Class mini bus bar
BL p-Class power bus box
NOTE: Power requirements for a ProLiant BL p-Class system: 200V - 240V AC, 30 amp or facility DC -48V ± 10%.
BL p-Class server blade, server blade enclosure, interconnects and power enclosure protected by a limited three year warranty with optional service
uplifts available
ProLiant BL40p Server Blade
+
DA - 11562
North America — Version 10 — September 8, 2003
Page 2
QuickSpecs
HP ProLiant BL40p Server Blade
Overview
BL p-Class Server Blade Enclosure
+
OR
Patch Panel (shown) or Patch Panel 2
GbE Interconnect Switch
or GbE2 Interconnect Switch (fiber or copper-based)
BL p-Class Interconnects
+
OR Facility DC
BL p-Class power enclosures and power supplies
+
DA - 11562
North America — Version 10 — September 8, 2003
Page 3
QuickSpecs
HP ProLiant BL40p Server Blade
Overview
OR
Scalable bus bar
OR
BL p-Class power distribution
Bus boxes
Configuration Steps
For a complete configuration of the ProLiant BL40p, do the following:
1. Select a BL40p server blade:
Single Xeon MP 1.5GHz processor, 512-MB RAM (2 x 256MB) (293461-B21)
or
Two Xeon MP 2.0 GHz processors, 1-GB RAM (2 X 512MB) (293462-B21)
(NOTE:
NOTE: Additional options include processors, memory, and PCI-X HBAs.)
PLUS
2. Decide how many BL p-Class Server Blade Enclosures to purchase (each enclosure can hold up to 2 ProLiant BL40p server blades):
BL p-Class server blade enclosure with 8 Rapid Deployment Pack licenses (281404-B21)
or
BL p-Class server blade enclosure with Rapid Deployment Pack trial (243564-B21)
PLUS
Select an Interconnect. Interconnects are sold in pairs. One pair of Interconnects is required with each BL p-Class server blade enclosure:
BL p-Class RJ-45 Patch panel (with 32 RJ-45 connectors) (230766-B21)
or
RJ-45 Patch Panel 2 with Fibre Channel pass through (required for Fibre Channel connectivity on BL20p G2 when using the patch panel
interconnect) (with 32 RJ-45 connectors and 16 Fibre Channel connectors) (306465-B21)
or
DA - 11562
North America — Version 10 — September 8, 2003
Page 4
QuickSpecs
HP ProLiant BL40p Server Blade
Overview
BL p-Class C-GbE Interconnect Kit (with 4 RJ-45 10/100/1000 T/TX/T and 4 RJ-45 10/100 T/TX external ports (249655-B21)
or
BL p-Class F-GbE Interconnect Kit (with 4 LC 1000 SX and 8RJ-45 10/100 T/TX external ports) (279720-B21)
PLUS
4. Select BL p-Class power enclosure and power supplies based on configuration. Use p-Class sizing tool to help determine power configuration:
http://h30099.www3.hp.com/configurator/powercalcs.asp
NOTE: This Web site is available in English only.
NOTE: Power enclosures and supplies are not needed if using facility DC (-48V ± 10%).
Single phase power enclosure with four hot-plug power supplies (239162-001) (Single-phase power enclosure holds a max of four power supplies; no
need to order additional power supplies with this option kit)
or
Three-phase power enclosure with six hot-plug power supplies (230769-001) (Three-phase power enclosure holds a max of six power supplies no need
to order additional power supplies with this option kit)
(Power enclosures and power supplies can also be purchased separately see options list for part numbers)
PLUS
5. Select power distribution:
Scalable bus bar - Supports up to 5 server blade enclosures (240560-B21)
or
Mini bus bar – Supports up to 3 server blade enclosures (240559-B21)
or
Power Bus Box - connects 1 power enclosure to 1 server blade enclosure (240562-B21)
DA - 11562
North America — Version 10 — September 8, 2003
Page 5
QuickSpecs
HP ProLiant BL40p Server Blade
Standard Features (Server Blade)
ProLiant BL40p Server Blade
Processor
One of the following
depending on Model:
Xeon MP processor 2.8 GHz/2MB
Xeon MP processor 2.0 GHz/1MB
Xeon MP processor 2.0 GHz/2MB
Xeon MP processor 1.50 GHz/1MB
Upgradability
Upgradable to quad processing
Cache Memory
2-MB Level 3 Cache (on the 2.0GHz Models)
1-MB Level 3 Cache (on the 1.50 GHz Models)
Chipset
ServerWorks GC-LE chipset
NOTE: For more information regarding ServerWorks, please see the following URL:
http://www.serverworks.com/products/overview.html.
NOTE: This Web site is available in English only.
Memory
Standard
512MB of 2-way interleaved PC2100 ECC DDR (2 X 256 MB) (1 processor model)
Maximum
12,288 MB
Standard
1024MB of 2-way interleaved PC2100 ECC DDR (2 X 512MB) (2 processor model)
Maximum
12,288 MB
NOTE: Memory must be installed in pairs. Advanced Memory Protection with Online Spare.
Network Controller
Six network adapters total:
Five NC7781 PCI-X Gigabit NICs (embedded)
One 10/100T iLO NIC dedicated to management
Manageability
Integrated Lights-Out (iLO) Management Advanced (ASIC on the System Board)
Internal Storage
Hard Drives
None ship standard
Maximum Internal
Storage
587.2 GB (internal drive cage) (4 x 146.8 GB Ultra320, 1" drives)
NOTE: All U320 Universal Hard Drives are backward compatible to U2 or U3 speeds.
Expansion Slots
Two Dedicated PCI-X slots (64b/100MHz capable) for redundant SAN connectivity
Dimensions
6U high x 7" wide. Fits within p-Class Server Blade Enclosure. One BL40p takes up four (4) server blade bays within a server
blade enclosure. Two BL40p server blades can fit within one server blade enclosure.
DA - 11562
North America — Version 10 — September 8, 2003
Page 6
QuickSpecs
HP ProLiant BL40p Server Blade
Standard Features (Server Blade Enclosure and Interconnects)
ProLiant BL p-Class Server Blade Enclosure and Interconnects
Proliant BL p-Class Server 6U (10.5-inch), 19-inch wide
Blade Enclosure
Holds up to 2 ProLiant BL40p server blades; 8 ProLiant BL20p server blades; or a combination of both.
10 bays per server blade enclosure:
8 bays for server blades
2 outside bays for interconnect modules (RJ-45 patch panels or GbE interconnect switches)
Server blades slide in and connect to the server blade enclosure back plane for power and data connections
Server blades slide in and connect to the server blade enclosure back plane for power and data connections
Up to 6 BL p-Class server blade enclosures fit in a 42U rack
Server blade management module attached to the back of each BL p-Class server blade enclosure to report all server events
and provide asset and inventory information
ProLiant BL p-Class Power Redundant 200V - 240V AC, 30 amp single-phase
Requirements
Redundant 208V 30amp 3-phase 4 wire
Redundant -48VDC ± 10%
DA - 11562
North America — Version 10 — September 8, 2003
Page 7
QuickSpecs
HP ProLiant BL40p Server Blade
Standard Features (Server Blade Enclosure and Interconnects)
ProLiant BL p-Class
Interconnect Switch
Option
Provides up to a 32 to 1 server networking cable reduction per server enclosure depending on the mix of BL20p, BL20p G2,
and BL40p servers. Each interconnect switch (two per enclosure) reduces up to sixteen internal server network (NICs) ports to
six external ports (four on a modular rear mounting interconnect module and two on the switch front panel). This provides a
total of twelve external ports per server blade enclosure. Only one to all twelve external ports may be used per server blade
enclosure.
The ProLiant BL p-Class F-GbE Interconnect Kit includes two GbE interconnect switches and two DualTSX Interconnect
Modules that provide four (4) LC 1000 SX and four (4) RJ-45 10/100 T/TX uplink ports per server enclosure.
The GbE2 Interconnect Kits (C-GbE2 and F-GbE2) are for applications that require network adapter consolidation to 1000
Mbps (Gigabit Ethernet), advanced network feature support including up to layer 7 switching, BL20p G2 Fibre Channel
pass-through, and 10 Gigabit Ethernet bandwidth connectivity to the network. Expandability of both layer 3-7 switching
and 10 Gigabit Ethernet is supported with future GbE2 Interconnect Switch upgrade options. The optional GbE2 Storage
Connectivity Kit is required for BL20p G2 Fibre Channel pass-through when using the GbE2 Interconnect Switch.
The ProLiant BL p-Class F-GbE2 Interconnect Kit includes two GbE2 Interconnect Switches and two QuadSX
Interconnect Modules that provide eight (8) LC 1000 SX and four (4) RJ-45 10/100/1000 T/TX/T external ports per
server blade enclosure
The ProLiant BL p-Class C-GbE2 Interconnect Kit includes two GbE2 Interconnect Switches and two QuadT2
Interconnect Modules that provide twelve (12) RJ-45 10/100/1000 T/TX/T external ports per server blade enclosure<
The GbE Interconnect Kits (C-GbE and F-GbE) are for applications that require network adapter consolidation to 100
Mbps (Fast Ethernet).
(Two switches per kit)
(Every BL p-Class server blade
enclosure requires two
interconnect switches OR two
RJ-45 patch panels)
The ProLiant BL p-Class F-GbE Interconnect Kit includes two GbE Interconnect Switches and two DualTSX
Interconnect Modules that provide four (4) LC 1000 SX and eight (8) RJ-45 10/100 T/TX external ports per server
blade enclosure.
The ProLiant BL p-Class C-GbE Interconnect Kit includes two GbE Interconnect Switches and two QuadT
Interconnect Modules that provide four (4) RJ-45 10/100/1000 T/TX/T and eight (8) RJ-45 10/100 T/TX external
ports per server blade enclosure.
Also included (per Interconnect Switch):
One (1) RS-232 DB-9 front panel out-of-band management port
Redundant cross links ports connecting the two interconnect switches
Redundant power inputs and on-board redundant fans
Hot-plug and hot- remove with configuration retention and no need to cable/re-cable
Power ON, management, and per port status and speed LED indicators
Reset/power momentary push-button switch
HP ProLiant BL Interconnect Switch Management Utilities and User Documentation CD
Fully pre-configured for rapid deployment and immediate operation
ProLiant BL Interconnect Switch Management System and Utilities:
Full featured web-based and scriptable command line (CLI) interfaces, password protected multi-level user accounts,
Telnet, SNMP, BootP client, port mirroring, port-based VLANs and VLAN tagging, EtherChannel compatible multi-port
trunking, network time protocol, spanning tree protocol, broadcast/multicast storm control, flow control, human
readable/writeable configuration file, TFTP client, IP address security restrictions, auto-MDI/MDIX, auto-negotiation and
auto-sensing with full-duplex support, and more.
ProLiant BL p-Class RJ-45 6U (10.5-inch), Plugs into BL p-Class 6U server blade enclosures
patch panel
Used to pass NIC signals from all server blades in server blade enclosure out as RJ-45 connections
Supports Gigabit Ethernet network controllers. 16 RJ-45 connectors on the back of each BL p-Class 6U RJ-45 patch panel
(Two patch panels per kit)
(Every BL p-Class server blade (32 RJ-45 connections per server blade enclosure).
enclosure requires two
interconnect switches OR two
RJ-45 patch panels)
DA - 11562
North America — Version 10 — September 8, 2003
Page 8
QuickSpecs
HP ProLiant BL40p Server Blade
Standard Features (Server Blade Enclosure and Interconnects)
Required Network Cabling
10Base-T
Categories 3, 4 or 5 UTP (100 meters)
EIA/TIA-568 100-ohm STP (100 meters)
100Base-TX
Category 5 UTP (100 meters)
EIA/TIA-568 100-ohm STP (100 meters)
1000Base-T
Category 5 UTP (100 meters)
EIA/TIA-568 100-ohm STP (100 meters)
1000Base-SX
50/125 µm Multimode Fiber, 400 MHz/Km (500 meters)
50/125 µm Multimode Fiber, 500 MHz/Km (550 meters)
62.5/125 µm Multimode Fiber, 160 MHz/Km (220 meters)
62.5/125 µm Multimode Fiber, 200 MHz/Km (275 meters)
DA - 11562
North America — Version 10 — September 8, 2003
Page 9
QuickSpecs
HP ProLiant BL40p Server Blade
Standard Features (Power System and Rack Information)
ProLiant BL p-Class Power NOTE: To determine power configuration please refer to the ProLiant BL p-Class Overview and Planning Whitepaper and
System and Rack
sizing tool, please see the following URL:
information
http://h30099.www3.hp.com/configurator/powercalcs.asp
NOTE: This Web site is available in English only.
ProLiant BL p-Class Power 3U (5.25-inch), 19-inch wide, 29-inch deep (0.48-meter wide, 0.74-meter deep), Dual input single phase and three phase
Enclosure
models available. BL p-Class power enclosure provides external, shared hot-plug power. Each three-phase power enclosure
houses up to six hot-plug power supplies each single-phase power enclosures hold up to four hot-plug power supplies to
power the BL p-Class server blades and interconnects.
Please use the sizing utility to determine the power needed for each configuration.
http://h30099.www3.hp.com/configurator/powercalcs.asp
NOTE: This Web site is available in English only.
Power enclosures and power supplies are not needed if using facility DC (-48V DC ± 10%). If using facility DC, only
Facility DC Power Connection kit part number (240563-B21) is needed.
BL p-Class Power
Distribution
In the ProLiant BL p-Class infrastructure, redundant -48 VDC power (from the power enclosures or facility DC power) is
distributed from the power enclosures to the server blade enclosures through a bus bar system. Hinges attach the ProLiant BL
bus bars to the rails in a rack. The bus bars swing open from the center to enable easy rear access to the server blades and
network cables. Power is distributed redundantly through independent A- and B-sided bus bars.
Three different power distribution solutions are available depending on the maximum number of server blade enclosures
planned for the rack:
ProLiant BL p-Class scalable bus bar
ProLiant BL p-Class mini bus bar
NOTE: To support a full 42U rack server blades (6 server blade enclosures), two mini bus bars are needed.
ProLiant BL p-Class power bus box
Scalable Bus Bar
Required Power Source
Power Enclosures
Supported
Server Blade Enclosures
Supported
Max. Rack Space Occupied
1 or 2
=5
36U
Mini Bus Bar
1
=3
21U
Power Bus Bar
1
1
9U
Two 30-amp redundant power feeds per power enclosure
Connectors
NEMA receptacles
1-phase
L6-30, 250v, 30A 3-wire
3-phase
L15-30, 250V, 30A, 4-wire
Optimized for power cabling from bottom and network cabling from top
DA - 11562
North America — Version 10 — September 8, 2003
Page 10
QuickSpecs
HP ProLiant BL40p Server Blade
Standard Features
ProLiant Essentials
Foundation Pack
Software
Optional ProLiant Essentials
Value Packs
Optional software offerings that selectively extend the functionality of an Adaptive
Infrastructure to address specific business problems and needs:
Rapid Deployment Pack – an automated solution for multi-server deployment and
provisioning, enabling companies to quickly and easily adapt to changing
business demands.
Workload Management Pack – provides easier management of complex
environments, improving overall server utilization and enabling Windows 2000
customers for the first time to confidently deploy multiple applications on a single
multiprocessor ProLiant Server.
Integrated Lights-Out Advanced Pack - The BL40p includes the advance version of
the Integrated Lights-Out which includes graphical console and virtual media
Insight Manager 7
Insight Manager 7 helps maximize system uptime and performance and reduces the cost of
maintaining the IT infrastructure by providing proactive notification of problems before
those problems result in costly downtime and reduced productivity. Insight Manager 7 is
easy to set up and provides rapid access to detailed fault and performance information
gathered by the Management Agents. One-click-access to the Remote Insight Lights Out
Edition board allows systems administrators to take full graphical control of ProLiant
servers in remote locations or lights-out data centers. Finally, Insight Manager 7 in concert
with the Version Control Agents and Version Control Repository Manager enables systems
administrators to version manage and update system software across groups of HP
ProLiant servers.
Management Agents
The Management Agents form the foundation for HP's Intelligent Manageability strategy.
They provide direct, browser-based access to in-depth instrumentation built into HP servers,
workstations, desktops, and portables, and send alerts to Insight Manager 7 and other
enterprise management applications in case of subsystem or environmental failures. For
additional information about the Management Agents and other management products
from HP, please visit the management website at http://www.hp.com/servers/manage.
ActiveUpdate
ActiveUpdate is a web-based application that keep IT managers directly connected to HP
for proactive notification and delivery of the latest software updates.
HP ROMPaq, support software, The latest software, drivers, and firmware fully optimized and tested for your ProLiant server
and configuration utilities
and options.
Survey Utility and diagnostics
utilities
The most advanced configuration analysis, reporting and troubleshooting utilities used by
HP and at your fingertips.
HP Health Driver
Health Drivers interface with the Integrated Lights-Out ASIC to provide system
management support, including monitoring of server components, event logging and
support for the HP Insight Management Agents.
iLO Management Interface
Driver
The iLO Management Interface Driver provides access to the iLO management processor
for Insight Management Agents. This interface is used to provide SNMP alert forwarding
and management agent integration.
NOTE: For more information regarding ProLiant Essentials Software, please see the
following URL: http://www.hp.com/servers/proliantessentials.
NOTE: This Web site is available in English only.
DA - 11562
North America — Version 10 — September 8, 2003
Page 11
QuickSpecs
HP ProLiant BL40p Server Blade
Standard Features
OS Support
Microsoft® Windows 2000 Advanced Server
Red Hat Linux 8.0
Red Hat Enterprise Linux AS
SuSE Linux Enterprise Server 7
United Linux
Microsoft Windows Server 2003
NOTE: For a complete and up-to-date listing of supported OSs and versions, please visit our OS Support Matrix at:
ftp://ftp.compaq.com/pub/products/servers/os-support-matrix-310.pdf.
NOTE: For an up-to-date listing of the latest drivers available for the HP ProLiant BL p-Class, please see:
http://www5.compaq.com/products/servers/proliantbl40p/index.html.
NOTE: For a more complete and up-to-date information on Linux support, please visit HP Linux Web site at:
http://h18000.www1.hp.com/products/servers/linux/hpLinuxcert.html.
NOTE: These Web sites are available in English only.
Intelligent Manageability Integrated Lights-Out Advanced (iLO)
Virtual Text and Graphical Remote Console *
Virtual Floppy *
Virtual Power Button Control
Dedicated LAN Connectivity
Automatic IP Configuration via DHCP/DNS/WINS
Industry Standard 128-bit Secure Sockets Layer (SSL) Security
IML and iLO Event Logging
Support for 12 user accounts with customizable access privileges
Automatic Server Recovery-2 (ASR-2)
Insight Manager 7
Redundant ROM
Remote Flash ROM
ROM Based Setup Utility (RBSU)
Advanced Configuration and Power Interface Specification Ready (ACPI)
Server Health Logs
HP Redundant Power Supply Utility
Pre-Failure Warranty (covers processors, as well as hard drives and memory)
HP Interconnect Switch Management System and Utilities (interconnect switch option)
Integrated Management Log (IML)
Off-Line Backup Processor capability
Dynamic sector repairing and drive parameter tracking (with Smart Array controllers)Redundant/adaptive load balancing
NIC Support
* Advanced features such as Graphical Remote Console and Virtual Floppy are included with the BL p-Class server.
DA - 11562
North America — Version 10 — September 8, 2003
Page 12
QuickSpecs
HP ProLiant BL40p Server Blade
Standard Features
Availability
Power redundancy: Redundant AC feeds into power enclosures, redundant DC feeds from power enclosure to server blade
enclosures, 1 + 1 redundant power supplies
Four hot-plug SCSI hard drive bays and integrated RAID (Smart Array 5i Plus Controller with 64-MB total Memory on the 5i
Plus Memory Module) on every server blade. Battery Backed Write Cache Enabler Module standard on the 2 processor
model and optional on the 1 processor model. Redundant ROM on each server blade
ECC Memory
Interconnects Switch Availability
Hot-plug and hot- remove with configuration retention and no need to cable/re-cable
Two network connections per server blade bay (four NICs total) routed to two redundant interconnect switches
Redundant inter-switch communication with two sets of redundant uplink ports per each interconnect switch
Redundant front panel ports per each interconnect switch for diagnostics, management, and additional uplinks
Redundant serial ports
IEEE 802.1s (GbE2 switch) and 802.1D Spanning tree protocol support for loop-free path redundancy
Static IEEE 802.3ad (EtherChannel compatible) trunking with automatic port load balancing and failover
Redundant switch configuration images in memory (GbE2 switch)
Redundant fans per each interconnect switch
Redundant 1+1 power to each interconnect switch
Support for ProLiant network adapter teaming
Redundant configurable community strings and SNMP trap manager hosts
Redundant configurable syslog server, DNS server, and default gateways (GbE2 switch)
Security
Power-on password
Administrator's password
Integrated Lights-Out has 12 customizable user accounts and SSL encryption
Integrated Lights-Out can be disabled via a Global Setting
Interconnect switch multilevel user names and passwords, management interface time out period setting, SSH*, SCP secure
copy protocol*, port-based IEEE 802.1Q tagged VLANs RADIUS user authentication and authorization*, and IP address
restriction
* GbE2 Interconnect Switch only
Minimum Rack
Requirements
Mounts in HP Telco racks and Third Party racks that meet the following criteria:
Compatible with 19-inch Standard EIA rail sets
EIA rail-to-rail depth is 29 - 30"
Cabinet depth must be at least 36-inch deep overall (Additional min. 3.5-inch clearance from rear RETMA rail to
rear door, inclusive in the 36-inch overall depth)
Ample room for top and bottom cable egress (approximately 8 square inches for full rack configuration with patch
panel)
Must be capable of supporting 1600 lb (for full rack configuration)
Perforated front and rear doors to accommodate front-to-back cooling
Must have 65% open perforation on server blade enclosure doors to support airflow requirements
Optimized for use with the 10000 Series racks
NOTE: If using Compaq 7000 Series rack, Rack Extension Kit and High Air Flow Rack Door options are required.
DA - 11562
North America — Version 10 — September 8, 2003
Page 13
QuickSpecs
HP ProLiant BL40p Server Blade
Standard Features
Rack Airflow Requirements
Rack 9000 and 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling efficiency for rackmounted servers. The 9000 and 10000 Series Racks provide enhanced airflow for maximum cooling, allowing these
racks to be fully loaded with servers using the latest processors.
Rack 7000 series Cabinets
When installing a server with processors running at speeds of 550 MHz or greater in Rack 7000 series racks with
glass doors (165753-001 (42U), and 163747-001 (22U)), the new processor technology requires the installation of
High Airflow Rack Door Inserts (327281-B21 (42U), 327281-B22 (42U 6 pack), or 157847-B21 (22U)) to promote
enhanced airflow for maximum cooling.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to
prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 830
square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate airflow
(equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be a
minimum of 2.75 inches (7 cm).
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement
ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.
NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD provided with the
server, or to the server documentation located in the Support section at the following URL:
http://www5.compaq.com/products/servers/proliantbl40p/index.html.
NOTE: This Web site is available in English only.
Service and Support
HP Services provides a three-year, limited warranty, including Pre-Failure Warranty (coverage of hard drives, memory and
processors) fully supported by a worldwide network of resellers and service providers. HP technical assistance is available
7x24, toll free in the United States and Canada. Telephone support services may be covered under warranty or available for
an additional fee.
NOTE: Server Blade Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support.
NOTE: Server Blade Enclosure and Interconnects Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site
support.
A full range of Care Pack packaged hardware and software services:
Installation and start up
Extended coverage hours and enhanced response times
System management and performance services
Availability and recovery services
NOTE: For more information, customer/resellers can contact http://www.hp.com/hps/.
Please see the following URL regarding Warranty Information For Your HP Products:
http://www.compaq.com/support/warranty_upgrades/web_statements/176738.html
For additional information regarding Worldwide Limited Warranty and Technical Support, please see the following URL:
ftp://ftp.compaq.com/pub/supportinformation/ejourney/176738.pdf.
NOTE: These Web sites are available in English only.
NOTE:
NOTE Certain restrictions and exclusions apply. Consult the Customer Support Center at 1-800-345-1518 for details.
DA - 11562
North America — Version 10 — September 8, 2003
Page 14
QuickSpecs
HP ProLiant BL40p Server Blade
Models
ProLiant BL40p P2.82MB, 1GB (2P)
336119-B21
ProLiant BL40p P2.01MB, 512MB (1P)
336118-B21
ProLiant BL40p P1.51MB, 512MB (1P)
293461-B21
ProLiant BL40p P2.02MB, 1GB (2P)
293462-B21
Processor(s)
(2) Xeon MP 2.8 GHz standard (up to 4 supported)
Cache Memory
2-MB Level 3 Cache (per processor)
Memory
1024 MB (Standard) of 2-way interleaved PC2100 ECC DDR (2 X 512 MB)
Network Controller
Five NC7781 PCI-X Gigabit NICs (embedded)
One additional 10/100T NIC dedicated to iLO Management
Storage Controller
Smart Array 5i Plus Controller (integrated on system board) with BBWC
Hard Drives
None ship standard
Internal Storage
Up to 587.2 GB maximum
Optical Drive
None
Form Factor
6U high x 7" wide. Fits within p-Class Server Blade Enclosure
Processor(s)
(1) Xeon MP 2.0 GHz standard (up to 4 supported)
Cache Memory
1-MB Level 3 Cache (per processor)
Memory
512 MB (Standard) of 2-way interleaved PC2100 ECC DDR (2 X 256 MB)
Network Controller
Five NC7781 PCI-X Gigabit NICs (embedded)
One additional 10/100T NIC dedicated to iLO Management
Storage Controller
Smart Array 5i Plus Controller (integrated on system board)
Hard Drives
None ship standard
Internal Storage
Up to 587.2 GB maximum
Optical Drive
None
Form Factor
6U high x 7" wide. Fits within p-Class Server Blade Enclosure
Processor(s)
(1) Xeon MP 1.5 GHz standard (up to 4 supported)
Cache Memory
1-MB Level 3 Cache (per processor)
Memory
512 MB (Standard) of 2-way interleaved PC2100 ECC DDR (2 X 256 MB)
Network Controller
Five NC7781 PCI-X Gigabit NICs (embedded)
One additional 10/100T NIC dedicated to iLO Management
Storage Controller
Smart Array 5i Plus Controller (integrated on system board)
Hard Drives
None ship standard
Internal Storage
Up to 587.2 GB maximum
Optical Drive
None
Form Factor
6U high x 7" wide. Fits within p-Class Server Blade Enclosure
Processor(s)
(2) Xeon MP 2.0 GHz standard (up to 4 supported)
Cache Memory
2-MB Level 3 Cache (per processor)
Memory
1024 MB (Standard) of 2-way interleaved PC2100 ECC DDR (2 X 512 MB)
Network Controller
Five NC7781 PCI-X Gigabit NICs (embedded)
One additional 10/100T NIC dedicated to iLO Management
Storage Controller
Smart Array 5i Plus Controller (integrated on system board) with BBWC
Hard Drives
None ship standard
Internal Storage
Up to 587.2 GB maximum
Optical Drive
None
Form Factor
6U high x 7" wide. Fits within p-Class Server Blade Enclosure
DA - 11562
North America — Version 10 — September 8, 2003
Page 15
QuickSpecs
HP ProLiant BL40p Server Blade
Options
ProLiant BL40p Unique
Options
ProLiant Essentials
Value Pack Software
Xeon MP 2.8GHz 2M Processor Option Kit
336121-B21
Xeon MP 2.0GHz 1M Processor Option Kit
336120-B21
Xeon MP 1.5GHz 1M Processor Option Kit
309330-B21
Xeon MP 2.0GHz 2M Processor Option Kit
309331-B21
ProLiant p-Class Diagnostic Station Upgrade Kit for the BL40p
309329-B21
Rapid Deployment Pack, 10 User, V1.x
NOTE: This license allows 10 servers to be managed and deployed via the Deployment Server.
NOTE: Not necessary if you purchase the server blade enclosure with 8 Rapid Deployment Pack
licenses 281404-B21.
NOTE: Rapid Deployment pack is now available in Linux only environments.
269817-B21
Rapid Deployment Pack, 1 User, V1.x
NOTE: This license allows 1 server to be managed and deployed via the Deployment Server.
NOTE: Not necessary if you purchase the server blade enclosure with 8 Rapid Deployment Pack
licenses 281404-B21.
NOTE: Rapid Deployment pack is now available in Linux only environments.
267196-B21
ProLiant Essentials Workload Management Pack (Featuring Resource Partitioning Manager version
2.0)
303284-B21
Flexible Quantity License Kit
302127-B21
License-Only - for use with a Master License Agreement
302128-B21
NOTE: For more information regarding ProLiant Essentials Software, please see the following URL:
http://www.compaq.com/proliantessentials.
NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs.
Refer to URL http://www.compaq.com/proliantessentials or the various ProLiant Essentials Value Pack
product QuickSpecs for more information.
NOTE: These Web sites are available in English only.
Processor
Memory
(DDR DIMMs)
Xeon MP 2.8GHz 2M Processor Option Kit
336121-B21
Xeon MP 2.0GHz 1M Processor Option Kit
336120-B21
Xeon MP 1.5GHz 1M Processor Option Kit
309330-B21
Xeon MP 2.0GHz 2M Processor Option Kit
309331-B21
512MB of PC2100 ECC DDR DIMM Memory Kit (2x256MB)
300678-B21
1024MB of PC2100 ECC DDR DIMM Memory Kit (2x512MB)
300679-B21
2048MB of PC2100 ECC DDR DIMM Memory Kit (2x1024MB)
300680-B21
4096MB of PC2100 ECC DDR DIMM Memory Kit (2x2048MB)
300682-B21
DA - 11562
North America — Version 10 — September 8, 2003
Page 16
QuickSpecs
HP ProLiant BL40p Server Blade
Options
Hard Drives
Wide Ultra320 – Universal Hot Plug
146.8-GB 10,000 rpm U320 Universal Hard Drive (1")
286716-B22
72.8-GB 10,000 rpm U320 Universal Hard Drive (1")
286714-B22
36.4-GB 10,000 rpm U320 Universal Hard Drive (1")
286713-B22
72.8-GB 15,000 rpm U320 Universal Hard Drive (1")
286778-B22
36.4-GB 15,000 rpm U320 Universal Hard Drive (1")
286776-B22
18.2-GB 15,000 rpm U320 Universal Hard Drive (1")
286775-B22
NOTE: All U320 Universal Hard Drives are backward compatible to U2 or U3 speeds.
NOTE: Please see the Hard Drive QuickSpecs for Technical Specifications such as capacity, height,
width, interface, transfer rate, seek time, physical configuration, and operating temperature:
U320 Hard Drive QS:
http://www5.compaq.com/products/quickspecs/11531_na/11531_na.HTML
Storage Controllers
Battery Backed Write Cache Enabler Option Kit
255514-B21
BL p-Class Server Blade
Enclosures
ProLiant BL p-Class Server Blade Enclosure (ProLiant Essentials Rapid Deployment Pack Trial)
243564-B21
ProLiant BL p-Class Server Blade Enclosure (8 ProLiant Essentials Rapid Deployment Pack Licenses)
281404-B21
ProLiant BL p-Class RJ-45 Patch Panel 2 with Fibre pass-through (pair) (required for ProLiant BL20p
G2 Fibre Channel connectivity connectivity when using the patch panel interconnect)
NOTE: Only one interconnect kit required per server blade enclosure.
306465-B21
ProLiant BL p-Class RJ-45 Patch Panel (pair)
NOTE: Only one interconnect kit required per server blade enclosure.
230766-B21
ProLiant BL p-Class C-GbE2 Interconnect Kit (with pair of GbE2 Interconnect Switches and two
QuadT2 Interconnect Modules)
NOTE: Only one interconnect kit required per server blade enclosure.
283192-B21
ProLiant BL p-Class F-GbE2 Interconnect Kit (with pair of GbE2 Interconnect Switches and two
QuadSX Interconnect Modules)
NOTE: Only one interconnect kit required per server blade enclosure.
283193-B21
ProLiant BL p-Class C-GbE Interconnect Kit (with pair of GbE Interconnect Switches and two QuadT
Interconnect Modules)
NOTE: Only one interconnect kit required per server blade enclosure.
NOTE: The GbE Interconnect Switch supports server NIC speeds to 100 Mbps. It is recommended
that a patch panel option be used if server NIC speeds to 1000 Mbps are required.
NOTE:
NOTE To meet applicable radio frequency (RF) emission limits, the sidewall panels on the ends of
any individual rack or a series of coupled racks and the front and rear doors must be installed in any
racks containing more than one ProLiant BL p-Class GbE Interconnect Kit.
249655-B21
ProLiant BL p-Class F-GbE Interconnect Kit (with pair of GbE Interconnect Switches and two DualTSX
Interconnect Modules)
NOTE: Only one interconnect kit required per server blade enclosure.
NOTE: The GbE Interconnect Switch supports server NIC speeds to 100 Mbps. It is recommended
that a patch panel option be used if server NIC speeds to 1000 Mbps are required.
NOTE: To meet applicable radio frequency (RF) emission limits, the sidewall panels on the ends of
any individual rack or a series of coupled racks and the front and rear doors must be installed in any
racks containing more than one ProLiant BL p-Class GbE Interconnect Kit.
279720-B21
ProLiant BL p-Class GbE Storage Connectivity Kit (with two Fibre Channel signal conditioning cards
and two OctalFC Interconnect Modules) (required for ProLiant BL20p G2 Fibre Channel connectivity
when using the GbE2 Interconnect Switch)
321745-B21
BL p-Class Interconnects
DA - 11562
North America — Version 10 — September 8, 2003
Page 17
QuickSpecs
HP ProLiant BL40p Server Blade
Options
BL p-Class Power options NOTE
NOTE: Use p-Class sizing tool to help determine power configuration:
http://www.hp.com/products/configurator
NOTE: This Web site is available in English only.
Single Phase Redundant Power Enclosure with 4 power supplies
(Single Phase Power Enclosure holds a maximum of 4 power supplies; no need to order additional
power supplies with this option kit)
239162-001
3 Phase Redundant Power Enclosure with 6 power supplies
(3 Phase Power Enclosure holds a maximum of 4 power supplies; no need to order additional power
supplies with this option kit)
230769-001
Single Phase Power Enclosure (empty)
(Holds up to 4 power supplies; power supplies are not included in this kit)
231710-001
3 Phase Power Enclosure (empty)
(Holds up to 6 power supplies; power supplies are not included in this kit)
231709-001
Single Power Supply
239161-B21
Facility DC Power Connection
240563-B21
ProLiant p-Class Scalable Bus Bar
240560-B21
ProLiant p-Class Mini Bus Bar
240559-B21
ProLiant p-Class Bus Power Box
240562-B21
ProLiant p-Class Diagnostic Station
NOTE: The Diagnostic Station allows access to the ProLiant p-Class server blades and the BL pClass interconnect switches outside of the server enclosure. The option provides power and a data
interface so that "offline" upgrade and diagnostic functions may be performed.
230743-B21
ProLiant p-Class Diagnostic Station Upgrade Kit for the BL40p
309329-B21
Oher Options
ProLiant BL p-Class Enclosure Shipping Bracket Option Kit
NOTE: Used to secure one server blade enclosure or one power enclosure in a rack when moving
rack.
293121-B21
MSA1000
MSA1000
201723-B22
MSA 1000 Controller
218231-B22
MSA Fibre Channel I/O Module
218960-B21
MSA1000 Integrated 3-port hub (NT, W2K,W2003)
286763-B21
MSA SAN Switch 2/8
288247-B21
FCA2101 Fibre Channel Adapter for MS operating systems
245299-B21
FCA2214 Fibre Channel Adapter for Linux
281541-B21
Power Distribution
Diagnostic Options
NOTE:
NOTE Please see the StorageWorks Modular SAN Array 1000 QuickSpecs for additional options
and configuration information at:
http://www5.compaq.com/products/quickspecs/11033_na/11033_na.HTML
DA - 11562
North America — Version 10 — September 8, 2003
Page 18
QuickSpecs
HP ProLiant BL40p Server Blade
Options
Cluster Options
ProLiant Cluster HA/F100 for MSA1000 v2
252408-B23
NOTE: For additional information regarding the ProLiant Cluster for HA/F100, HA/F200 for
MSA1000 please see the following QuickSpecs at:
http://www5.compaq.com/products/quickspecs/11035_na/11035_na.html
ProLiant Cluster HA/F500 Enhanced Kit for EVA 2
254623-B23
ProLiant Cluster HA/F500 Basic Kit for EVA 2
313047-B22
NOTE: For additional information regarding the HP ProLiant Cluster for ProLiant Cluster HA/F500
for Enterprise Virtual Array please see the following QuickSpecs at:
http://www5.compaq.com/products/quickspecs/11055_na/11055_na.html
ProLiant Cluster HA/F500 Basic Kit for MA8000/EMA12000/EMA16000
103250-B26
ProLiant Cluster HA/F500 Enhanced Kit for MA8000/EMA12000/EMA16000
379937-B26
ProLiant Cluster HA/F500 Enhanced DT Kit for MA8000/EMA12000/EMA16000
164227-B24
NOTE: For additional information regarding the HP ProLiant Cluster for HA/F500 please see the
following QuickSpecs at:
http://www5.compaq.com/products/quickspecs/10232_na/10232_na.html
StorageWorks Modular
Array 8000/Enterprise
Modular Array 12000
EMA12000 D14 60Hz
175990-B21
EMA12000 S14 60Hz
175991-B21
MA8000 60Hz
175992-B21
EMA12000 Blue 60Hz
175993-B21
NOTE: Options include controller, solution kits, ACS. MA8000/EMA12000 includes controller shelf,
drive shelves and cabinet. Packaging upgrade to RA8000/ESA12000.
NOTE: Please see the StorageWorks MA8000/EMA12000 QuickSpecs for FC Hubs, FC switches,
platform software, host adapters, disks and options for complete solutions at:
http://www5.compaq.com/products/quickspecs/10545_na/10545_na.HTML
StorageWorks
Enterprise Modular
Array 16000 FC
EMA16000 D14 60Hz (opal)
238792-B21
EMA16000 S14 60Hz (opal)
238791-B21
NOTE: Models include: Dual HSG80 controllers in each Model 2200 enclosure (2 pairs per single
bus configuration, 4 pairs per dual bus configuration) with 1GB cache per controller pair, and 12 14bay drive enclosures with redundant power supplies. Configure-to-Order (CTO) builds are available.
Options include ACS, platform kits and software by HP.
NOTE: Please see the StorageWorks EMA16000 QuickSpecs for FC switches, platform software, host
adapters, disks and options for complete solutions at:
http://www5.compaq.com/products/quickspecs/10812_na/10812_na.HTML
StorageWorks Director 2/64
286809-B21
NOTE: Please see the StorageWorks SAN Director 2/64 QuickSpecs for additional information:
http://www5.compaq.com/products/quickspecs/11003_na/11003_na.HTML
DA - 11562
North America — Version 10 — September 8, 2003
Page 19
QuickSpecs
HP ProLiant BL40p Server Blade
Options
HP Rack 10000 Series
(Graphite Metallic)
HP S10614 (14U) Rack Cabinet - Shock Pallet
292302-B22
HP 10647 (47U) Rack Cabinet - Pallet
245160-B21
HP 10647 (47U) Rack Cabinet - Crated
245160-B23
HP 10642 (42U) Rack Cabinet - Pallet
245161-B21
HP 10642 (42U) Rack Cabinet - Shock Pallet
245161-B22
HP 10642 (42U) Rack Cabinet - Crated
245161-B23
HP 10636 (36U) Rack Cabinet - Pallet
245162-B21
HP 10636 (36U) Rack Cabinet - Shock Pallet
245162-B22
HP 10636 (36U) Rack Cabinet - Crated
245162-B23
HP 10622 (22U) Rack Cabinet - Pallet
245163-B21
HP 10622 (22U) Rack Cabinet - Shock Pallet
245163-B22
HP 10622 (22U) Rack Cabinet - Crated
245163-B23
NOTE: -B21 (pallet) used to ship empty racks shipped on a truck
-B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and
Channels)
-B23 (crated) used for air shipments of empty racks
NOTE: Not all HP equipment is qualified to be shipped in the Rack 10000 series.
Compaq Rack 9000 Series Compaq Rack 9142 (42U) – Pallet
(opal)
Compaq Rack 9142 (42U) – Shock Pallet
Compaq Rack 9142 (42U) – Crated
120663-B21
120663-B22
120663-B23
NOTE: –B21 (pallet) used to ship empty racks shipped on a truck
–B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and
Channels)
–B23 (crated) used for air shipments of empty racks
DA - 11562
North America — Version 10 — September 8, 2003
Page 20
QuickSpecs
HP ProLiant BL40p Server Blade
Options
Rack Options for HP Rack Rack Blanking Panels – Graphite (Multi)
10000 Series
NOTE: Contains one each of 1U, 2U, 4U and 8U.
Rack Blanking Panels – Graphite (1U)
253214-B26
253214-B21
NOTE: The Rack Blanking Panels (PN 253214-B21) contains 10 each of (1U).
Rack Blanking Panels – Graphite (2U)
253214-B22
NOTE: The Rack Blanking Panels (PN 253214-B22) contains 10 each of (2U).
Rack Blanking Panels – Graphite (3U)
253214-B23
NOTE: The Rack Blanking Panels (PN 253214-B23) contains 10 each of (3U).
Rack Blanking Panels – Graphite (4U)
253214-B24
NOTE: The Rack Blanking Panels (PN 253214-B24) contains 10 each of (4U).
Rack Blanking Panels – Graphite (5U)
253214-B25
NOTE: The Rack Blanking Panels (PN 253214-B25) contains 10 each of (5U).
800mm Wide Stabilizer Kit (Graphite)
255488-B21
NOTE: Supported by the Rack 10842 cabinet only.
600mm Stabilizer Kit – Graphite
246107-B21
Baying Kit for Rack 10000 series (Carbon)
248929-B21
42U Side Panel – Graphite Metallic
246099-B21
110V Fan Kit (Graphite)
257413-B21
NOTE: Roof Mount Includes power cord with IEC320-C13 to Nema 5-15P.
220V Fan Kit (Graphite)
257414-B21
NOTE: Roof Mount Includes power cord with IEC320-C13 to Nema 6-15P.
36U Side Panel – Graphite Metallic
246102-B21
47U Side Panel – Graphite Metallic
255486-B21
9000/10000 Series Offset Baying Kit (42U)
248931-B21
NOTE: This kit can be used to connect 9000 and 10000 series racks of the same U height together.
Kit contents include hardware for connecting racks and a panel to cover the 100mm gap at the rear
of the two racks.
DA - 11562
North America — Version 10 — September 8, 2003
Page 21
QuickSpecs
HP ProLiant BL40p Server Blade
Options
Rack Options for
Rack 9000 Series
Rack Options for
Rack 7000 Series and
Telco racks
Baying/Coupling Kit
120669-B21
42U Side Panel
NOTE: The 42U Side Panel (PN 120670-B21) supports the HP Rack 9142 and HP Rack 9842.
120670-B21
36U Side Panel
NOTE: The 36U Side Panel (PN 120671-B21) supports the HP Rack 9136.
120671-B21
600mm Stabilizer Option Kit
120673-B21
800mm Stabilizer Option Kit (Opal)
NOTE: The 800mm Stabilizer Kit (PN 234493-B21) supports the Rack 9842 only
234493-B21
Grounding Rack Option Kit
120682-B21
Stabilizer Option Kit
120673-B21
Rack Blanking Panel (Multi)
NOTE: Kit includes four panels in 1U, 2U, 4U, and 8U.
169940-B21
9142 Extension Kit
NOTE: The 9142 Extension Kit (PN 120679-B21) supports the HP Rack 9142 only.
120679-B21
Rack Blanking Panels (1U)
NOTE: The Rack Blanking Panels (PN 189453-B21) contains 10 each of (1U).
189453-B21
Rack Blanking Panels (2U)
NOTE: The Rack Blanking Panels (PN 189453-B21) contains 10 each of (2U).
189453-B22
Rack Blanking Panels (3U)
NOTE: The Rack Blanking Panels (PN 189453-B21) contains 10 each of (3U).
189453-B23
Rack Blanking Panels (4U)
NOTE: The Rack Blanking Panels (PN 189453-B21) contains 10 each of (4U).
189453-B24
Rack Blanking Panels (5U)
NOTE: The Rack Blanking Panels (PN 189453-B21) contains 10 each of (5U)
189453-B25
9136 Extension Kit
218216-B21
9142 Short Rear Door
NOTE: The 9142 Short Rear Door (PN 218217-B21) supports the HP Rack 9142 only.
218217-B21
Split Rear Door (Opal)
NOTE: The Split Rear Door (PN 254045-B21) supports the 600 mm wide, 42U 9000 series rack.
254045-B21
9136 Short Rear Door
218218-B21
9142 Split Rear Door
254045-B21
9000/10000 Series Offset Baying Kit
NOTE: This kit can be used to connect 9000 and 10000 series racks in 42U height together. Kit
contents include hardware for connecting racks and a panel to cover the 100mm gap at the rear of
the two racks.
248931-B21
High Air Flow Rack Door Insert for the 7122 Rack
157847-B21
High Air Flow Rack Door Insert for the 7142 Rack (single)
327281-B21
High Air Flow Rack Door Insert for the 7142 Rack (6-pack)
327281-B22
Compaq Rack Extension Kit for 7142
154392-B21
DA - 11562
North America — Version 10 — September 8, 2003
Page 22
QuickSpecs
HP ProLiant BL40p Server Blade
Options
Rack Options for Rack
10000, 9000 and 7000
Series
Monitor Utility Shelf
303606-B21
Ballast Option Kit
120672-B21
100kg Sliding Shelf
234672-B21
Rack Rail Adapter Kit (25"depth)
120675-B21
Monitor/Utility Shelf - Graphite
253449-B21
Depth Adjustable Fixed Rail
332558-B21
Cable Management D-Rings Kit
168233-B21
Console Management Controller (CMC) Option Kit
203039-B21
Console Management Controller (CMC) Sensors Option Kit
203039-B22
Console Management Controller (CMC) Locking Option Kit
203039-B23
Console Management Controller (CMC) Smoke Sensor Option Kit
203039-B24
Rack Options for Telco
Racks
Bus Bar Telco Rail Option Kit
245249-B21
Enclosure Telco Rail Option Kit
266076-B21
Service and Support
Offerings (HP Care Pack
Services)
NOTE: HP Care Pack services cover a fully configured ProLiant BL p-Class server blade enclosure
with interconnects and up to 8 BL20p server blades or 2 BL40p server blades or any combination,
power enclosure with power supplies and power distribution.
Hardware Services On-site Service
4-Hour On-site Service 5-Day x 13-Hour Coverage, 3 Years (Canadian Part Number)
4-Hour On-site Service, 5-Day x 13-Hour, 3 Years (U.S. Part Number)
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years (Canadian Part Number)
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years (U.S. Part Number)
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years (Canadian Part Number)
6-Hour Call to Repair, On-site Service 7-Day x 24-Hour Coverage, 3 Years (U.S. Part Number)
FP-J23EC-36
331134-002
FP-J27EC-36
274370-002
FP-J2CEC-36
331135-002
Installation & Start-up Services
Hardware Installation (Canadian Part Number)
FP-J2INS-EC
Hardware Installation (U.S. Part Number)
274371-002
Provides for the Installation and Start-up of HP's Rapid Deployment Pack on a Customer supplied
server designated as a Deployment Server. Includes the deployment of a single server. This new server
will be deployed using either one of the pre-configured scripts or an image. In addition, the service
will provide for the capture and storage of the configuration of the newly deployed server and
orientation on product usage. To be delivered during standard office ours, standard office days. (U.S.
Part Number)
274545-002
NOTE: For more information, customer/resellers can contact http://www.hp.com/services/carepack .
DA - 11562
North America — Version 10 — September 8, 2003
Page 23
QuickSpecs
HP ProLiant BL40p Server Blade
Memory
ProLiant BL40p Server Blade (2P Model)
Standard Memory
1024-MB of 2-way interleaved PC2100 ECC DDR installed (2 x 512-MB SDRAM DIMM)
Standard Memory Plus Optional Memory
Up to 9216-MB of 2-way interleaved PC2100 ECC DDR memory is available with the installation of optional DDR DIMM memory expansion kits.
Standard Memory Replaced with Optional Memory
Up to 12288-MB of 2-way interleaved PC2100 ECC DDR memory is available with the removal of standard memory and the installation of optional DDR
DIMM memory expansion kits.
Memory
Standard
Optional
Maximum
Slot
1,024MB
9,216MB
12,288 MB
1
2
3
4
5
6
512 MB
512 MB
2048 MB
512 MB
512 MB
2048 MB
Empty
2048 MB
2048 MB
Empty
2048 MB
2048 MB
Empty
2048 MB
2048 MB
Empty
2048 MB
2048 MB
Following are memory options available from HP:
2512MB of PC2100 ECC DDR DIMM Memory Kit (2x256MB)
300678-B21
1024MB of PC2100 ECC DDR DIMM Memory Kit (2x512MB)
300679-B21
2048MB of PC2100 ECC DDR DIMM Memory Kit (2x1024MB)
300680-B21
4096MB of PC2100 ECC DDR DIMM Memory Kit (2x2048MB)
300682-B21
ProLiant BL40p Server Blade (1P Model)
Standard Memory
512MB of 2-way interleaved PC2100 ECC DDR installed (2 x 256-MB SDRAM DIMM)
Standard Memory Plus Optional Memory
Up to 8704-MB of 2-way interleaved PC2100 ECC DDR memory is available with the installation of optional DDR DIMM memory expansion kits.
Standard Memory Replaced with Optional Memory
Up to 12288-MB of 2-way interleaved PC2100 ECC DDR memory is available with the removal of standard memory and the installation of optional DDR
DIMM memory expansion kits.
Memory
Standard
Optional
Maximum
Slot
512MB
4,608MB
12,288MB
1
256 MB
256 MB
2048 MB
2
256 MB
256 MB
2048 MB
3
Empty
2048 MB
2048 MB
4
Empty
2048 MB
2048 MB
5
Empty
2048 MB
2048 MB
6
Empty
2048 MB
2048 MB
Following are memory options available from HP:
512MB of PC2100 ECC DDR DIMM Memory Kit (2x256MB)
300678-B21
1024MB of PC2100 ECC DDR DIMM Memory Kit (2x512MB)
300679-B21
2048MB of PC2100 ECC DDR DIMM Memory Kit (2x1024MB)
300680-B21
4096MB of PC2100 ECC DDR DIMM Memory Kit (2x2048MB)
300682-B21
DA - 11562
North America — Version 10 — September 8, 2003
Page 24
QuickSpecs
HP ProLiant BL40p Server Blade
TechSpecs
HP ProLiant BL p-Class
Server Blade Enclosure
Dimensions
Height
10.5 in (26.67 cm)
Width
17.60 in (44.70 cm)
Depth
28.86 in (73.30 cm)
Rated input voltage
-43 VDC to -53 VDC Nominal -48 VDC
Rated input current
62.5 A at -48 VDC
Rated input Power
3000 W
Rated input voltage
-43 VDC to -53 VDC Nominal -48 VDC
Rated input current
6.25 A at -48 VDC
Rated input Power
300 W
Operating
50° to 95° F (10° to 35° C)
Non-Operating
-22° to 140° F (-30° to 60° C)
Relative humidity
(non-condensing)
Operating
20% to 80%
Non-Operating
5% to 95%
Wet bulb temperature
Operating
82.4° F (28° C)
Non-Operating
101.7° F (38.7° C)
Input Specifications
Individual server blade
bay ratings
Temperature range
NOTE: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Upper
operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or
30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude
maximum for storage is 70 KPa.
Operating and
Performance
Specifications for
ProLiant BL40p Server
Blade
Dimensions
Height
1.69 in (4.29 cm)
Width
10.29 in (26.14 cm)
Depth
28.00 in (71.12 cm)
Weight (maximum)
18.0 lb (8.17 kg)
Temperature range
Operating
50° to 95° F (10° to 35° C)
Non-operating
Relative humidity
(non-condensing)
Maximum wet bulb
temperature
Shipping
-40° to 140° F (-40° to 60° C)
Storage
-4° to 140° F (-20° to 60° C)
Operating
10% to 90%
Non-operating
Shipping
10% to 90%
Storage
10% to 95%
82° F (28° C)
NOTE: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Upper
operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or
30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude
maximum for storage is 70 KPa.
DA - 11562
North America — Version 10 — September 8, 2003
Page 25
QuickSpecs
HP ProLiant BL40p Server Blade
TechSpecs
Operating and
Performance
Specifications for RJ-45
Patch panel 2 with Fibre
Channel pass through
Dimensions
Height
10.405 in (26.43 cm)
Width
1.535 in (3.899 cm)
Depth
27.697 in (70.35 cm)
Capability
IEEE 802.2, 802.3, 802.3u
Network Transfer Rate
10 Base-T (half-duplex)
10 Mbps
10 Base-T (full-duplex)
20 Mbps
100 Base-TX (half-duplex)
100 Mbps
100 Base-TX (full-duplex)
200 Mbps
1000 Base-TX (full-duplex)
1000 Mbps
Connector
RJ-45
Cable Support
10 Base-TX
Categories 3, 4, or 5 UTP (2 or 4 pair); up to 328 ft (100
m)
100 Base-TX
Category 5 UTP (2 pair); up to 328 ft (100 m)
1000 Base-TX
Category 5E (4 pair); up to 328 ft (100 m)
Power requirements
200 mA at + 5V DC; 500 mA at -48V
Temperature range
Operating
50° to 95° F (10° to 35° C)
Non-operating
-22° to 140° F (-30° to 60° C)
Relative humidity
(non-condensing)
Operating
20% to 80%
Non-operating
5% to 95%
Wet bulb temperature
Operating
82.4° F (28° C)
Non-operating
101.7° F (38.7° C)
NOTE: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Upper
operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or
30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude
maximum for storage is 70 KPa.
DA - 11562
North America — Version 10 — September 8, 2003
Page 26
QuickSpecs
HP ProLiant BL40p Server Blade
TechSpecs
Operating and
Performance
Specifications for RJ-45
Patch Panel
Dimensions
Height
10.405 in (26.43 cm)
Width
1.535 in (3.899 cm)
Depth
27.697 in (70.35 cm)
Capability
IEEE 802.2, 802.3, 802.3u
Network Transfer Rate
10 Base-T (half-duplex)
10 Mbps
10 Base-T (full-duplex)
20 Mbps
100 Base-TX (half-duplex)
100 Mbps
100 Base-TX (full-duplex)
200 Mbps
1000 Base-TX (full-duplex)
1000 Mbps
Connector
RJ-45
Cable Support
10 Base-TX
Categories 3, 4, or 5 UTP (2 or 4 pair); up to 328 ft (100
m)
100 Base-TX
Category 5 UTP (2 pair); up to 328 ft (100 m)
1000 Base-TX
Category 5E (4 pair); up to 328 ft (100 m)
Power requirements
200 mA at + 5V DC; 500 mA at -48V
Temperature range
Operating
50° to 95° F (10° to 35° C)
Non-operating
-22° to 140° F (-30° to 60° C)
Relative humidity
(non-condensing)
Operating
20% to 80%
Non-operating
5% to 95%
Wet bulb temperature
Operating
82.4° F (28° C)
Non-operating
101.7° F (38.7° C)
NOTE: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Upper
operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or
30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude
maximum for storage is 70 KPa.
DA - 11562
North America — Version 10 — September 8, 2003
Page 27
QuickSpecs
HP ProLiant BL40p Server Blade
TechSpecs
Operating and
Performance
Specifications for GbE
Interconnect Switch
Dimensions
Height
10.41 in (26.43 cm)
Width
1.54 in (3.9 cm)
Depth
27.7 in (70.35 cm)
Weight
11.5 lb/5.2 kg per interconnect switch
Performance
9.6 Gbps external port bandwidth per server blade enclosure (full duplex)
Forwarding rate 0.15 million pps per 10/100 port, 1.5 million pps per gigabit port, (64byte packets)
Non-blocking, full-wire speed for all connections
Auto-MDI/MDIX, auto-negotiation and auto-sensing with full-duplex support
Forwarding Mode
Store and forward
MAC Addresses
8,191 per interconnect switch; MAC address based filtering and MAC address packet
priority configuring
Forwarding table age time Maximum age: 1 to 1,000,000 seconds; default: 300 seconds
Memory
32MB Main, 6MB flash and 16MB packet buffer per interconnect switch
Compliance
IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.1D, 802.1p, 802.3ac, 802.3ad (Static),
802.1Q, and 802.3x
SNMP v1 (RFC 1157) and RMON v1 (RFC 1757) groups 1, 2, 3, and 9
MIB-II (RFC 1213), Bridge MIB (RFC 1493), Interface Group MIB (RFC 2863), Ethernet MIB
(RFC 1643), 802.1Q Extended Bridge MIB (RFC 2674), Entity MIB (RFC 2037), SNMP Trap
Convention (RFC 1215), Bridge Trap (RFC 1493), Remote Monitoring Traps (RFC 1757),
and HP Enterprise Switch MIBs and Environmental Traps
IGMP v1 (RFC 1112), IGMP v2 (RFC 2236), SNTP (RFC 1361), Telnet (RFC 854), TFTP
client (RFC 783), BootP client, (RFC 2132), DHCP client, (RFC 2131) and Zmodem
Network transfer rate
10 Base-T (half-duplex)
10 Mbps
10 Base-T (full-duplex)
20 Mbps
100 Base-TX (half-duplex)
100 Mbps
100 Base-TX (full-duplex)
200 Mbps
1000 Base-TX (half-duplex)
1000 Mbps
1000 Base-TX (full-duplex)
2000 Mbps
1000 Base-SX (full-duplex)
2000 Mbps
Connector
RJ-45, DB-9 (C-GbE Interconnect Kit)
LC fiber, RJ-45, DB-9 (F-GbE Interconnect Kit)
EMI
FCC Class A
ICES-003 Class A
AS/NZS 3548 Class A
VCCI Class A
Safety
UL/CUL Listed Accessory
CE
Power Requirements
48V: 1050 mA, 50 W maximum (per interconnect switch)
Temperature Range
Operating
50° to 95° F (10° to 35° C)
Non-operating
-22° to 140° F (-30° to 60° C)
Relative humidity
(non-condensing)
Operating
20% to 80%
Non-operating
5% to 95%
Wet bulb temperature
Operating
82.4° F (28° C)
Non-operating
101.7° F (38.7° C)
NOTE: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Upper
operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or
30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude
maximum for storage is 70 KPa.
DA - 11562
North America — Version 10 — September 8, 2003
Page 28
QuickSpecs
HP ProLiant BL40p Server Blade
TechSpecs
Operating and
Performance
Specifications for Power
Enclosures
Single-Phase Model
Three-Phase Model
Height
5.25 in (13.34 cm)
5.25 in (13.34 cm)
Width
27.15 in (68.96 cm)
27.15 in (68.96 cm)
Depth
17.60 in (44.7 cm)
17.60 in (44.7 cm)
No hot-plug power supplies
47.5 lb (21.55 kg)
47.5 lb (21.55 kg)
All hot-plug power supplies
99.5 lb (45.13 kg)
125.5 lb (56.93 kg)
Rated input voltage
200 VAC to 240 VAC
200 VAC to 240 VAC line to
line
Rated input frequency
50 Hz to 60 Hz
50 Hz to 60 Hz
Rated input current per side
24A
24A per phase
Rated input power per side
5760 W
9976 W
Power cord
1 NEMA L6-30P per side
1 NEMA L15-30 per side
Rated output voltage
-48.8 VDC to –54 VDC
-48.8 VDC to –54 VDC
Rated output current
99A
170A
Rated output power
4298 W
8310 W
Nominal power
4158 W at 208 VAC
7202 W at 208 VAC
Operating
50° to 95° F
(10° to 35° C)
50° to 95° F
(10° to 35° C)
Shipping
-22° to 140° F
(-30° to 60° C)
-22° to 140° F
(-30° to 60° C)
Relative humidity,
non-condensing
(See NOTE)
NOTE
Operating
20% to 80%
20% to 80%
Non-operating
5% to 95%
5% to 95%
Wet bulb temperature
Operating
82.4° F (28° C)
82.4° F (28° C)
Non-operating
101.7° F (38.7° C)
101.7° F (38.7° C)
Dimensions
Weights
Input requirements
Output voltage
specifications
Ambient temperature
range
(See NOTE)
NOTE
NOTE: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Upper
operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or
30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude
maximum for storage is 70 KPa.
DA - 11562
North America — Version 10 — September 8, 2003
Page 29
QuickSpecs
HP ProLiant BL40p Server Blade
TechSpecs
Operating and
Performance
Specifications for Power
Distribution Devices
Power Bus Box
Mini Bus Bar
Scalable Bus Bar
Power enclosures or
facility DC feeds
supported (3U each)
1
1
2
Server blade enclosures
supported (6U each)
1
3
5
Total rack height of
supported enclosures
9U
21U
36U
Height
5.1 in (12.95 cm)
19.45 in (49.40 cm)
48.57 in (123.37 cm)
Width
3.6 in (9.14 cm) each
19.74 in (50.14 cm)
19.74 in (50.14 cm)
Depth
Dimensions
3.25 in (8.26 cm)
2.2 in (5.59 cm)
2.2 in (5.59 cm)
Weight
3.62 lb (1.64 kg)
13.2 lb (59.9 kg)
26 lb (11.79 kg)
Rated operating voltage
-43.2 VDC to -54 VDC
-43.2 VDC to -54 VDC
-43.2 VDC to -54 VDC
Max total power supported 3000 W
9000 W
15,000 W
Total max input current at 69.44 A at -43.2VDC
minimum voltage
208.32 A at -43.2 VDC
347.2 A at -43.2 VDC
(equivalent of 175A per feed)
Total max input current at 62.5 A at -48VDC
nominal voltage
187.5 A at -48 VDC
312.5 A at -48 VDC
(equivalent of 175A per feed)
Max current per power
feed
70A
210A
210A
Max local ambient
temperature
149° F (65° C)
149° F (65° C)
149° F (65° C)
NOTE: All systems support redundant A & B feeds. Scalable bus bar supports dual A and dual B feeds.
DA - 11562
North America — Version 10 — September 8, 2003
Page 30
QuickSpecs
HP ProLiant BL40p Server Blade
TechSpecs
Operating and
Voltage
Performance
Specifications for Facility
DC
Current
Nominal input voltage
-48 VDC
Operating voltage range
-48VDC ± 10% or -43.2 VDC to -52.8 VDC
Max Input voltage slew rate
0.5V/uS
Redundant feed voltages*
(A & B)
*A and B feeds must differ by no more than 5VDC during
steady state operation
Ripple/Noise
480 mV PARD**
Overshoot
Must remain within regulation limits on all feeds during
startup or shutdown
Voltage transients
Must not exceed -60 VDC
Max steady state input current
62.5A per server blade enclosure installed at -48VDC
Max steady state current per
feed/total
62.5A per server blade enclosure installed at -48VDC
Power bus boxes
70 A/70A
Mini bus bars
210 A/210A
Scalable bus bars
210 A/350A or equivalent of 175A per feed*
In-rush current
Must support up to 2X the maximum operating current per server blade enclosure (125 A)
for up to 1.0 mS
Input over-current
Customer provided fusing for facility DC feeds that protects the system from catastrophic
over-current within 20 uS. Fuse should sustain all in-rush and operating currents.
Max Input Current Slew
Rate
1A/uS
Max Rated Power
3000W per server blade enclosure
Connections and Cables
HP provided facility DC cable connection kit:
The facility DC connection kit supports the connection of up to four -48VDC,
RETURN pairs and ground.
The power cable assemblies consist of 1/0AWG, color-coded, flexible cable rated at 105°
C, terminated with bus mating connectors at one end and unterminated at the other end.
The cable length provided enables the customer to route to a fuse panel within or adjacent
to the rack.
NOTE: *All systems support redundant A and B feeds. Scalable bus bars support dual A and dual B feeds.
** Periodic and random noise (PARD). Maximum allowable peak-to-peak ripple and noise (as measured at the load on any
output channel). The ripple and noise is measured over a 20 Hz to 100 MHz frequency band. A resistive load (nonelectronic) is used for this measurement. Each output is by-passed to return by a 10uF tantalum capacitor with an ESR less
than 100 milli-Ohms in parallel with a 0.47 uF ceramic capacitor, at the point of load. The load cable is 12 feet of twisted
wire capable of carrying the current. The printed wiring board assembly is installed in its enclosure for this measurement, or
the measurement leads are properly shielded with Earth grounds applied to the insert.
© Copyright 2003 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel Corporation.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein
should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
DA - 11562
North America — Version 10 — September 8, 2003
Page 31