ViewSonic GT800 Specifications

Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Interrupt List
Release 61
Last change 16jul00
Copyright (c) 1989-1999,2000 Ralf Brown
--------!---FILELIST------------------------Please redistribute the following files unmodified as a group, in a quartet of
archives named INTER61A through INTER61D (preferably the original authenticated
PKZIP archives):
INTERRUP.1ST the read-me file, containing credits, availability info
INTERRUP.A INT 00 through INT 10/BE \
INTERRUP.B INT 10/BF through INT 15/0F\
INTERRUP.C INT 15/10 through INT 15/E7 \
INTERRUP.D INT 15/E8 through INT 1A/B0 \
INTERRUP.E INT 1A/B1 through INT 1F
\
total 2520 pages at
INTERRUP.F INT 20 through INT 21/43
\ 60 lines per page,
INTERRUP.G INT 21/44 through INT 21/5E \ 2684 with INTPRINT -p
INTERRUP.H INT 21/5F through INT 21/E2 >(8754 entries)
INTERRUP.I INT 21/E3 through INT 21/F1 / (4135 tables)
INTERRUP.J INT 21/F2 through INT 25
/
INTERRUP.K INT 26 through INT 2F/15
/
INTERRUP.L INT 2F/16 through INT 2F/79 /
INTERRUP.M INT 2F/7A through INT 2F/D9 /
INTERRUP.N INT 2F/DA through INT 50
/
INTERRUP.O INT 51 through INT 61
/
INTERRUP.P INT 62 through INT 6A /
INTERRUP.Q INT 6B through INT 91 /
INTERRUP.R INT 92 through INT FF /
INTERRUP.PRI a brief introduction to interrupts
INTPRINT.COM a simple formatter that also generates a list summary
INTPRINT.DOC instructions for INTPRINT
OVERVIEW.LST brief listing of major uses of each interrupt
86BUGS.LST a listing of CPU bugs and undocumented features
BIBLIO.LST bibliography of information sources for the list
CMOS.LST a description of the CMOS RAM data bytes
FARCALL.LST APIs available through FAR CALLs
GLOSSARY.LST a glossary of terms, abbreviations, and acronyms
MEMORY.LST format of the BIOS data area
OPCODES.LST a listing of recent and undocumented CPU instructions
PORTS.A
a listing of I/O ports 0000h-013Fh
PORTS.B
a listing of I/O ports 0140h-0AD5h
PORTS.C
a listing of I/O ports 0AD6h-FFFFh
CATEGORY.KEY descriptions of divider-line category letters
COMBINE.COM combine the pieces of the list into a single file
-1-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
COMBINE.DOC documentation for COMBINE
The following files should be distributed in an archive called INTER61E:
86BUGSnn.ZIP programs to test for CPU bugs
COMBINE.ASM source code for COMBINE.COM
INT.*
invoke interrupts from commandline
INTHLP??.ZIP Interrupt Helper viewer for the interrupt list
INTLIST.E Epsilon extension for handling list
INTPRINT.C source code for INTPRINT
INTSUM??.ZIP interrupt list browser (Interrupt Summary)
IVIEW*.ZIP another interrupt list browser
Finally, the following should be distributed in an archive called INTER61F:
INT2RTF.ZIP Slava Gostrenko's Windows Help converter
INT2WHLP.ZIP convert list into Windows Help database
INTERRUP.ICO icon for interrupt list
HINTSRCH.ZIP WinHelp DLL for full-text searches of interrupt list
IL2ME???.ZIP convert list into Multi-Edit help database
INT2GUID.* convert list into TurboPower GUIDE or POPHELP database
INT2HLP.ZIP convert list into QuickHelp database
INT2IPF.ZIP convert list into OS/2 .IPF database
INT2QH.* program to convert list into QuickHelp database
INT2TPH.ZIP convert to Turbo/Borland Pascal help file (.TPH)
INTHELP.* convert list into TurboPower GUIDE database
RB2NG???.ZIP convert list into Norton Guides database
WH_ED*.ZIP WinHelp-file editor
--------!---CONTACT_INFO--------------------If you notice any mistakes or omissions, please let me know! It is only with
YOUR help that the list can continue to grow at the current rate. Please send
all changes to me rather than distributing a modified version of the list.
D:\D\inter61a\INTERRUP.A
Please read the file INTERRUP.1ST before asking me any questions.
that they have already been addressed.
You may find
Ralf Brown
Internet: ralf@pobox.com (currently forwards to ralf@telerama.lm.com)
FIDO: Ralf Brown 1:129/26.1
or post a message to me in the DR_DEBUG echo (I probably won't see it
unless you address it to me)
I reply to all e-mail submissions, but some of my replies bounce because of
bad return paths. If you don't get a response from me within a reasonable
-2-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
period of time, send it again with a better return path (many mailers are
improperly configured and do not produce a valid From: address).
--------!---Note----------------------------See INTERRUP.1ST for the key to system abbreviations and a list of the
trademarks mentioned here.
--------!---DISCLAIMER----------------------DISCLAIMER: THIS MATERIAL IS PROVIDED "AS IS". I verify the information
contained in this list to the best of my ability, but I cannot be held
responsible for any problems caused by use or misuse of the information,
especially for those functions not officially documented. If it is marked
"internal" or undocumented, you should check it carefully to make sure it
works the same way in your version of the software (and please let me know
whether or not it works the same way). Information marked with "???" is
known to be incomplete or guesswork.
--------!---FLAGS---------------------------The use of -> instead of = signifies that the indicated register or register
pair contains a pointer to the specified item, rather than the item itself.
Register pairs (such as AX:BX) indicate that the item is split across the
registers, with the high-order half in the first register.
One or more letters may follow the interrupt number; they have the following
meanings: U - undocumented function, u - partially documented function,
P - available only in protected mode, R - available only in real or V86 mode,
C - callout or callback (usually hooked rather than called),
O - obsolete (no longer present in current versions)
--------!---CATEGORIES----------------------The ninth column of the divider line preceding an entry usually contains a
classification code (the entry has not been classified if that character is
a dash). The codes currently in use are:
A - applications, a - access software (screen readers, etc),
B - BIOS, b - vendor-specific BIOS extensions,
C - CPU-generated, c - caches/spoolers,
D - DOS kernel, d - disk I/O enhancements,
E - DOS extenders, e - electronic mail, F - FAX,
f - file manipulation, G - debuggers/debugging tools, g - games,
H - hardware, h - vendor-specific hardware,
I - IBM workstation/terminal emulators, i - system info/monitoring,
J - Japanese, j - joke programs,
K - keyboard enhancers, k - file/disk compression,
l - shells/command interpreters,
M - mouse/pointing device, m - memory management,
-3-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
N - network, n - non-traditional input devices,
O - other operating systems,
P - printer enhancements, p - power management,
Q - DESQview/TopView and Quarterdeck programs,
R - remote control/file access, r - runtime support,
S - serial I/O, s - sound/speech,
T - DOS-based task switchers/multitaskers, t - TSR libraries
U - resident utilities, u - emulators,
V - video, v - virus/antivirus,
W - MS Windows,
X - expansion bus BIOSes, x - non-volatile config storage
y - security, * - reserved (and not otherwise classified)
--------C-00--------------------------------INT 00 C - CPU-generated - DIVIDE ERROR
Desc: generated if the divisor of a DIV or IDIV instruction is zero or the
quotient overflows the result register; DX and AX will be unchanged.
Notes: on an 8086/8088, the return address points to the following instruction
on an 80286+, the return address points to the divide instruction
an 8086/8088 will generate this interrupt if the result of a division
is 80h (byte) or 8000h (word)
SeeAlso: INT 04,OPCODE "AAD"
--------G-00--------------------------------INT 00 - Zenith - ROM DEBUGGER
Desc: invokes the ROM Debugger when at the BIOS level; equivalent to
pressing Ctrl-Alt-Ins on booting.
Note: since DOS revectors INT 00, it is necessary to restore this vector to
its original ROM BIOS value in order to invoke the debugger once DOS
loads
SeeAlso: INT 03"Columbia"
--------C-01--------------------------------INT 01 C - CPU-generated - SINGLE STEP
Desc: generated after each instruction if TF (trap flag) is set; TF is
cleared on invoking the single-step interrupt handler
Notes: interrupts are prioritized such that external interrupts are invoked
after the INT 01 pushes CS:IP/FLAGS and clears TF, but before the
first instruction of the handler executes
used by debuggers for single-instruction execution tracing, such as
MS-DOS DEBUG's T command
SeeAlso: INT 03"CPU"
--------C-01--------------------------------INT 01 C - CPU-generated (80386+) - DEBUGGING EXCEPTIONS
D:\D\inter61a\INTERRUP.A
-4-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Desc: generated by the CPU on various occurrences which may be of interest
to a debugger program
Note: events which may trigger the interrupt:
Instruction address breakpoint fault - will return to execute inst
Data address breakpoint trap - will return to following instruction
General detect fault, debug registers in use
Task-switch breakpoint trap
undocumented 386/486 opcode F1h - will return to following instruc
SeeAlso: INT 03"CPU"
--------H-02--------------------------------INT 02 C - external hardware - NON-MASKABLE INTERRUPT
Desc: generated by the CPU when the input to the NMI pin is asserted
Notes: return address points to start of interrupted instruction on 80286+
on the 80286+, further NMIs are disabled until the next IRET
instruction, but one additional NMI is remembered by the hardware
and will be serviced after the IRET instruction reenables NMIs
maskable interrupts may interrupt the NMI handler if interrupts are
enabled
although the Intel documentation states that this interrupt is
typically used for power-failure procedures, it has many other uses
on IBM-compatible machines:
Memory parity error: all except Jr, CONV, and some machines
without memory parity
Breakout switch on hardware debuggers
Coprocessor interrupt: all except Jr and CONV
Keyboard interrupt: Jr, CONV
I/O channel check: CONV, PS50+
Disk-controller power-on request: CONV
System suspend: CONV
Real-time clock: CONV
System watch-dog timer, time-out interrupt: PS50+
DMA timer time-out interrupt: PS50+
Low battery: HP 95LX
Module pulled: HP 95LX
--------m-02----SI0714----------------------INT 02 U - STB RAPIDMAP.SYS - ???
SI = 0714h
ES:DI -> ???
Return: ???
SeeAlso: INT 67/AX=6100h"STB",PORT 00E1h"STB"
--------C-03---------------------------------5-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
INT 03 C - CPU-generated - BREAKPOINT
Desc: generated by the one-byte breakpoint instruction (opcode CCh)
Notes: used by debuggers to implement breakpoints, such as MS-DOS DEBUG's G
command
also used by Turbo Pascal versions 1,2,3 when {$U+} specified
return address points to byte following the breakpoint instruction
called by Novell DOS 7 EMM386 after displaying an exception error
message (GPF, illegal opcodes, etc.) and before waiting for user
input
called by QEMM-386 if the user presses 'I' (undocumented) when prompted
after an exception error message
SeeAlso: INT 01"CPU"
--------G-03--------------------------------INT 03 - Columbia PCs (desktop,VP portables) - ROM DEBUGGER
Desc: invokes the ROM Debugger if INT 03 has not been revectored; equivalent
to pressing Esc on booting.
SeeAlso: INT 00"Zenith",INT 03"Realia"
--------G-03--------------------------------INT 03 - Realia COBOL - DEBUGGER SUPPORT
Note: Realia COBOL checks for a signature eight bytes prior to the interrupt
handler when it starts up
BUG: if the offset of the INT 03 vector is less than 8, the compiler and
all executables generated by it will crash the system
SeeAlso: INT 03"Columbia"
--------G-03--------------------------------INT 03 U - Watcom WVIDEO, Watcom WD - OUTPUT DEBUGGING MESSAGE
STACK: DWORD selector
DWORD offset of ASCIZ message to display
Notes: the INT 03h instruction which invokes the debugger must be followed by
a JMP SHORT and the signature string "WVIDEO"
to check whether this interface is available, define a public byte
variable named ___WD_Present, which the debugger will set to 01h
before running the program
SeeAlso: AX=0910h
--------U-03--------------------------------INT 03 - DTown Utilities - POP UP
Program: DTown Software Development's DTown Utilities contains various tools
which are useful to programmers, such as a memory viewer and
disassembler
Note: DTU pops up on INT 03 (if not hooked by a debugger) to allow the
user to inspect memory or code when the machine crashes; various
-6-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
memory managers will invoke INT 03 when displaying a CPU exception
error message (either automatically or when the user presses a
particular key)
SeeAlso: INT 2D/AL=20h"DTown"
--------G-030000----------------------------INT 03 - Soft-ICE - BACK DOOR COMMANDS - GET Soft-ICE VERSION
AX = 0000h
SI = magic value 4647h ('FG')
DI = magic value 4A4Dh ('JM')
Return: SI = BCD version (0280h = v2.80)
SeeAlso: INT 03/AX=0910h
--------G-0301------------------------------INT 03 - Soft-ICE - BACK DOOR COMMANDS - ???
AH = 01h
SI = magic value 4647h ('FG')
DI = magic value 4A4Dh ('JM')
Return: ???
SeeAlso: AX=0000h,AX=090Bh,INT 03/AH=10h
--------G-030900----------------------------INT 03 - Soft-ICE v2.80 - BACK DOOR COMMANDS - ???
AX = 0900h
SI = magic value 4647h ('FG')
DI = magic value 4A4Dh ('JM')
DS:BX -> ???
CX = ???
DX = ???
Return: ???
SeeAlso: AX=0000h,AH=01h,AX=0902h,AX=0914h
--------G-030902----------------------------INT 03 - Soft-ICE v2.80 - BACK DOOR COMMANDS - POPUP & START A DEBUG SESSION
AX = 0902h
SI = magic value 4647h ('FG')
DI = magic value 4A4Dh ('JM')
DS:BX -> initial register values (see #00001)
Return: registers as specified in initial register values table
Note: This function is called by LDR.EXE in loading a program to
be debugged. After executing the function, Soft-ICE pops up its
debugging window and you may start debugging your program.
Return: ???
SeeAlso: AX=0000h,AX=090Ah,AX=0910h,AX=0914h
D:\D\inter61a\INTERRUP.A
-7-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
Format of Soft-ICE initial register values:
Offset Size Description (Table 00001)
00h WORD initial value of SP
02h WORD initial value of SS
04h WORD initial value of IP
06h WORD initial value of CS
08h WORD initial value of DS and ES
0Ah WORD ???
0Ch WORD ???
0Eh WORD ???
10h WORD initial value of AX
12h WORD ??? (defaults to 000AH ???)
14h WORD ??? (defaults to 0001H ???)
16h WORD ??? (defaults to 0100H ???)
--------G-030903----------------------------INT 03 - Soft-ICE v2.80 - BACK DOOR COMMANDS - ???
AX = 0903h
SI = magic value 4647h ('FG')
DI = magic value 4A4Dh ('JM')
DS:BX -> ???
CX = ???
DX = ???
Return: ???
SeeAlso: AX=0000h,AX=0902h,AX=0907h,AX=0914h
--------G-030907----------------------------INT 03 - Soft-ICE v2.80 - BACK DOOR COMMANDS - ???
AX = 0907h
SI = magic value 4647h ('FG')
DI = magic value 4A4Dh ('JM')
DS:BX -> ???
CX = ???
DX = ???
Return: ???
SeeAlso: AX=0000h,AX=0903h,AX=090Ah,AX=0914h
--------G-03090A----------------------------INT 03 - Soft-ICE v2.80 - BACK DOOR COMMANDS - ???
AX = 090Ah
SI = magic value 4647h ('FG')
DI = magic value 4A4Dh ('JM')
DS:BX -> ???
CX = ???
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
-8-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
DX = ???
Return: ???
SeeAlso: AX=0000h,AX=0907h,AX=090Bh,AX=0914h
--------G-03090B----------------------------INT 03 - Soft-ICE v2.80 - BACK DOOR COMMANDS - ???
AX = 090Bh
SI = magic value 4647h ('FG')
DI = magic value 4A4Dh ('JM')
DS:BX -> ???
CX = ???
DX = ???
Return: ???
SeeAlso: AX=0000h,AX=090Ah,AX=0910h,AX=0914h
--------G-030910----------------------------INT 03 - Soft-ICE - BACK DOOR COMMANDS - DISPLAY STRING IN Soft-ICE WINDOW
AX = 0910h
SI = magic value 4647h ('FG')
DI = magic value 4A4Dh ('JM')
DS:DX -> ASCIZ string to display (max 100 bytes, 0Dh OK)
Program: Soft-ICE is a debugger by Nu-Mega Technologies, Inc.
SeeAlso: INT 03"WVIDEO"
--------G-030911----------------------------INT 03 - Soft-ICE - BACK DOOR COMMANDS - EXECUTE Soft-ICE COMMAND
AX = 0911h
SI = magic value 4647h ('FG')
DI = magic value 4A4Dh ('JM')
DS:DX -> ASCIZ command string (max 100 bytes, 0Dh OK)
Return: nothing
SeeAlso: AX=0912h,AX=0913h
--------G-030912----------------------------INT 03 - Soft-ICE - BACK DOOR COMMANDS - GET BREAKPOINT INFORMATION
AX = 0912h
SI = magic value 4647h ('FG')
DI = magic value 4A4Dh ('JM')
Return: BH = entry number of last breakpoint set
BL = type of last breakpoint set (see #00002)
DH = entry number of last breakpoint to be triggered
DL = type of last triggered breakpoint (see #00002)
Program: Soft-ICE is a debugger by Nu-Mega Technologies, Inc.
SeeAlso: AX=0911h,AX=0913h,AX=0914h
D:\D\inter61a\INTERRUP.A
-9-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
(Table 00002)
Values for Soft-ICE breakpoint type:
00h BPM (breakpoint register types)
01h I/O
02h INTerrupt
03h BPX (INT 03-style breakpoint)
04h reserved
05h range
--------G-030913----------------------------INT 03 - Soft-ICE v2.5x - BACK DOOR COMMANDS - SET Soft-ICE BREAKPOINT
AX = 0913h
SI = magic value 4647h ('FG')
DI = magic value 4A4Dh ('JM')
DS:DX -> breakpoint structure (see #00003)
Return: AX = status
00h successful
BX = breakpoint number
03h breakpoint table full
06h memory limit error
07h I/O limit error
09h range limit error
16h duplicate breakpoint
SeeAlso: AX=0911h,AX=0912h,AX=0914h
Format of Soft-ICE breakpoint structure:
Offset Size Description (Table 00003)
00h BYTE breakpoint type (see #00004)
01h DWORD breakpoint address 1
(lower range limit for memory BPs,
interrupt number for interrupt BPs,
address of BP for execution BPs,
I/O address (only word) for I/O BPs)
05h DWORD breakpoint address 2
(upper range limit for memory BPs,
optional value to check for for interrupt BPs,
overlay number (0 = root) for execution BPs)
09h DWORD breakpoint address 3
0Dh BYTE breakpoint mode 1 (see #00005)
(for interrupt BPs = register to check
00h no value checking
01h check AL
-10-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
02h check AH
03h check AX)
0Eh BYTE breakpoint mode 2 (see #00005)
0Fh BYTE breakpoint size (00h byte, 01h word, 03h dword)
10h BYTE breakpoint pass count before program stop
11h BYTE breakpoint state
Note: all unused fields should contain zeros
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00004)
Values for Soft-ICE breakpoint type:
00h memory location
01h memory range
03h I/O
04h interrupt
05h execution break
(Table 00005)
Values for Soft-ICE breakpoint mode:
01h read
02h write
04h execution
--------G-030914----------------------------INT 03 - Soft-ICE v2.5x - BACK DOOR COMMANDS - REMOVE Soft-ICE BREAKPOINT
AX = 0914h
SI = magic value 4647h ('FG')
DI = magic value 4A4Dh ('JM')
BX = breakpoint number (returned by AX=0913h)
Return: BX = ???
Program: Soft-ICE is a debugger by Nu-Mega Technologies, Inc.
SeeAlso: AX=0912h,AX=0913h
--------G-030918----------------------------INT 03 - Soft-ICE v2.80 - BACK DOOR COMMANDS - ???
AX = 0918h
SI = magic value 4647h ('FG')
DI = magic value 4A4Dh ('JM')
DS:BX -> ???
CX = ???
DX = ???
Return: ???
SeeAlso: INT 03/AX=0000h,INT 03/AX=0910h,INT 03/AX=0914h,INT 03/AH=10h
--------G-0310-------------------------------11-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
INT 03 - Soft-ICE v2.80 - BACK DOOR COMMANDS - ???
AH = 10h
SI = magic value 4647h ('FG')
DI = magic value 4A4Dh ('JM')
Return: ???
SeeAlso: INT 03/AX=0000h,INT 03/AX=0910h,INT 03/AH=01h,INT 03/AH=11h
--------G-0311------------------------------INT 03 - Soft-ICE v2.80 - BACK DOOR COMMANDS - ???
AH = 11h
SI = magic value 4647h ('FG')
DI = magic value 4A4Dh ('JM')
Return: none???
SeeAlso: INT 03/AX=0000h,INT 03/AX=0910h,INT 03/AH=10h,INT 03/AX=130Ch
--------G-03130C----------------------------INT 03 - Soft-ICE v2.80 - BACK DOOR COMMANDS - ???
AX = 130Ch
SI = magic value 4647h ('FG')
DI = magic value 4A4Dh ('JM')
BX = ???
CX = ???
DX = ???
Return: AX = ??? (1300h)
SeeAlso: INT 03/AX=0000h,INT 03/AX=0910h,INT 03/AH=11h,INT 03/AX=130Eh
--------G-03130E----------------------------INT 03 - Soft-ICE v2.80 - BACK DOOR COMMANDS - ???
AX = 130Eh
SI = magic value 4647h ('FG')
DI = magic value 4A4Dh ('JM')
BX = ???
CX = ???
DX = ???
Return: AX = ??? (1300h)
SeeAlso: INT 03/AX=0000h,INT 03/AX=0910h,INT 03/AX=130Ch,INT 03/AX=1313h
--------G-031313----------------------------INT 03 - Soft-ICE v2.80 - BACK DOOR COMMANDS - ???
AX = 1313h
SI = magic value 4647h ('FG')
DI = magic value 4A4Dh ('JM')
BX = ???
CX = ???
DX = ???
-12-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Return: AX = ??? (1300h)
SeeAlso: INT 03/AX=0000h,INT 03/AX=0910h,INT 03/AX=130Eh
--------G-030900----------------------------INT 03 - Soft-ICE v2.80 - BACK DOOR COMMANDS - ???
AX = 0900h
SI = magic value 4647h ('FG')
DI = magic value 4A4Dh ('JM')
Return: none???
SeeAlso: INT 03/AX=0000h,INT 03/AX=0910h,INT 03/AH=10h,INT 03/AH=12h
--------C-04--------------------------------INT 04 C - CPU-generated - INTO DETECTED OVERFLOW
Desc: the INTO instruction will generate this interrupt if OF (Overflow Flag)
is set; otherwise, INTO is effectively a NOP
Note: may be used for convenient overflow testing (to prevent errors from
propagating) instead of JO or a JNO/JMP combination
SeeAlso: INT 00"CPU",OPCODE "AAD",OPCODE "AAM"
--------B-05--------------------------------INT 05 - PRINT SCREEN
Desc: dump the current text screen to the first printer
Notes: normally invoked by the INT 09 handler when PrtSc key is pressed, but
may be invoked directly by applications
byte at 0050h:0000h contains status used by default handler
00h not active
01h PrtSc in progress
FFh last PrtSc encountered error
default handler is at F000h:FF54h in IBM PC and 100%-compatible BIOSes
since the BOUND instruction also calls INT 05h, but returns control
to the BOUND instruction, a failed BOUND check will cause an infinite
loop of PrtScreens unless the INT 05 handler is aware of the problem
and checks whether the interrupt was invoked by a BOUND instruction
BUG: some old BIOSes/applications appear to destroy BP on return
SeeAlso: INT 10/AH=12h/BL=20h,INT 4A"Tandy 2000",INT 5E"TI Professional"
SeeAlso: INT 80"Phar Lap"
--------C-05--------------------------------INT 05 C - CPU-generated (80186+) - BOUND RANGE EXCEEDED
Desc: generated by BOUND instruction when the value to be tested is less than
the indicated lower bound or greater than the indicated upper bound.
Note: returning from this interrupt re-executes the failing BOUND instruction
--------P-05454A----------------------------INT 05 U - PSPS v2.01 - EJECT PAGE
AX = 454Ah ('EJ')
-13-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Program: PSPS is shareware PostScript PrintScreen utility by A.N.D.
Technologies
Note: sends a ^D to the current printer
SeeAlso: AX=4E57h,AX=5053h,AX=554Eh
--------P-054E57----------------------------INT 05 U - PSPS v2.01 - SET PARAMETERS
AX = 4E57h ('NW')
ES:SI -> 11-byte buffer containing new settings
Return: buffer filled
SeeAlso: AX=454Ah,AX=5053h,INT 17/AH=63h
--------P-055053----------------------------INT 05 U - PSPS v2.01 - GET PARAMETERS
AX = 5053h ('PS')
ES:SI -> 11-byte buffer for settings
Return: buffer filled
SeeAlso: AX=4E57h,AX=554Eh,INT 17/AH=64h
--------P-05554E----------------------------INT 05 U - PSPS v2.01 - UNINSTALL
AX = 554Eh ('UN')
Program: PSPS is shareware PostScript PrintScreen utility by A.N.D.
Technologies
SeeAlso: AX=454Ah,AX=4E57h,INT 17/AH=62h
--------C-06--------------------------------INT 06 C - CPU-generated (80186+) - INVALID OPCODE
Desc: this interrupt is generated when the CPU attempts to execute an
invalid opcode (most protected-mode instructions are considered
invalid in real mode) or a BOUND, LDS, LES, or LIDT instruction
which specifies a register rather than a memory address
Notes: return address points to beginning of invalid instruction
with proper programming, this interrupt may be used to emulate
instructions which do not exist; many 386 BIOSes emulate the 80286
undocumented LOADALL instruction which was removed from the 80386+
generated by the 80386+ when the LOCK prefix is used with instructions
other than BTS, BTR, BTC, XCHG, XADD (486), CMPXCHG (486), INC, DEC,
NOT, NEG, ADD, ADC, SUB, SBB, AND, OR, or XOR, or any instruction
not accessing memory.
SeeAlso: INT 0C"CPU",INT 0D"CPU"
--------b-06--------------------------------INT 06 C - HP 95LX - SLEEP/WAKEUP
Desc: this interrupt is called just before going into light or deep
(shutdown) sleep and just after returning from light or deep sleep
-14-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
SeeAlso: INT 0B"HP 95LX",INT 15/AX=4DD4h,INT 15/AH=4Eh
--------V-06--------------------------------INT 06 U - no-name clone - GRAPHICS CHARACTER TABLE (NOT A VECTOR!)
Desc: points at graphics data for characters 00h-7Fh of the current font
SeeAlso: INT 43"EGA",INT 44"VIDEO"
--------C-07--------------------------------INT 07 C - CPU-generated (80286+) - PROCESSOR EXTENSION NOT AVAILABLE
Desc: this interrupt is automatically called if a coprocessor instruction is
encountered when no coprocessor is installed
Note: can be used to emulate a numeric coprocessor in software
SeeAlso: INT 09"CPU"
--------H-08--------------------------------INT 08 C - IRQ0 - SYSTEM TIMER
Desc: generated 18.2 times per second by channel 0 of the 8254 system timer,
this interrupt is used to keep the time-of-day clock updated
Notes: programs which need to be invoked regularly should use INT 1C unless
they need to reprogram the timer while still keeping the time-of-day
clock running at the proper rate
default handler is at F000h:FEA5h in IBM PC and 100%-compatible BIOSes
may be masked by setting bit 0 on I/O port 21h
SeeAlso: INT 1C,INT 4A"SYSTEM",INT 50"DESQview",INT 58"DoubleDOS",INT 70"IRQ8"
SeeAlso: INT 78"GO32",INT D8"Screen Thief",MEM 0040h:0040h,MEM 0040h:006Ch
--------C-08--------------------------------INT 08 C - CPU-generated (80286+) - DOUBLE EXCEPTION DETECTED
Desc: called when multiple exceptions occur on one instruction, or an
exception occurs in an exception handler
Notes: called in protected mode if an interrupt above the defined limit of
the interrupt vector table occurs
return address points at beginning of instruction with errors or the
beginning of the instruction which was about to execute when the
external interrupt caused the exception
if an exception occurs in the double fault handler, the CPU goes into
SHUTDOWN mode (which circuitry in the PC/AT converts to a reset);
this "triple fault" is a faster way of returning to real mode on
many 80286 machines than the standard keyboard controller reset
--------H-09--------------------------------INT 09 C - IRQ1 - KEYBOARD DATA READY
Desc: this interrupt is generated when data is received from the keyboard.
This is normally a scan code (from either a keypress *or* a key
release), but may also be an ACK or NAK of a command on AT-class
keyboards.
-15-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Notes: this IRQ may be masked by setting bit 1 on I/O port 21h
if the BIOS supports an enhanced (101/102-key) keyboard, it calls
INT 15/AH=4Fh after reading the scan code (see #00006) from the
keyboard and before further processing; all further processing uses
the scan code returned from INT 15/AH=4Fh
the default interrupt handler is at F000h:E987h in 100%-compatible
BIOSes
the interrupt handler performs the following actions for certain
special keystrokes:
Ctrl-Break
clear keyboard buffer, place word 0000h in buffer,
invoke INT 1B, and set flag at 0040h:0071h
SysReq
invoke INT 15/AH=85h (SysReq is often labeled SysRq)
Ctrl-Numlock place system in a tight wait loop until next INT 09
Ctrl-Alt-Del jump to BIOS startup code (either F000h:FFF0h or the
destination of the jump at that address)
Shift-PrtSc invoke INT 05
Ctrl-Alt-Plus (HP Vectra) enable keyclick
Ctrl-Alt-Plus (many clones) set clock speed to high
Ctrl-Alt-Minus (HP Vectra) reduce keyclick volume
Ctrl-Alt-Minus (many clones) set clock speed to low
Ctrl-Alt-SysReq (HP Vectra) generate hard reset
Ctrl-Alt-S (many clones) run BIOS setup program
Ctrl-Alt-Esc (many clones) run BIOS setup program
Ctrl-Alt-Ins (many clones) run BIOS setup program
Ctrl-Alt-LeftShift-GrayMinus (some clones) turn off system cache
Ctrl-Alt-LeftShift-GrayPlus (some clones) turn on system cache
DR DOS hooks this interrupt to control the cursor shape (underscore/
half block) for overwrite/insert mode
DR Multiuser DOS hooks this interrupt for cursor shape control and to
control whether Ctrl-Alt-Del reboots the current session or the
entire system
SeeAlso: INT 05"PRINT SCREEN",INT 0B"HP 95LX",INT 15/AH=4Fh,INT 15/AH=85h
SeeAlso: INT 16/AH=00h,INT 16/AH=10h,INT 1B,INT 2F/AX=A901h,INT 4A/AH=00h"TI"
SeeAlso: INT 51"DESQview",INT 59"DoubleDOS",INT 79"GO32"
(Table 00006)
Values for keyboard make/break (scan) code:
01h Esc
31h N
02h 1 !
32h M
03h 2 @
33h , <
63h F16
04h 3 #
34h . >
64h F17
-16-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
05h
06h
07h
08h
09h
0Ah
0Bh
0Ch
0Dh
0Eh
0Fh
10h
11h
12h
13h
14h
15h
16h
17h
18h
19h
1Ah
1Bh
1Ch
1Dh
1Eh
1Fh
20h
21h
22h
23h
24h
25h
26h
27h
28h
29h
2Ah
2Bh
2Ch
2Dh
4 $
35h / ?
65h F18
5 %
36h Right Shift 66h F19
6 ^
37h Grey*
67h F20
7 &
38h Alt
68h F21 (Fn) [*]
8 *
39h SpaceBar
69h F22
9 (
3Ah CapsLock
6Ah F23
0 )
3Bh F1
6Bh F24
- _
3Ch F2
6Ch -= +
3Dh F3
6Dh EraseEOF
Backspace 3Eh F4
Tab
3Fh F5
6Fh Copy/Play
Q
40h F6
W
41h F7
E
42h F8
72h CrSel
R
43h F9
73h <delta> [*]
T
44h F10
74h ExSel
Y
45h NumLock
75h -U
46h ScrollLock
76h Clear
I
47h Home
77h [Note2] Joyst But1
O
48h UpArrow
78h [Note2] Joyst But2
P
49h PgUp
79h [Note2] Joyst Right
[ {
4Ah Grey7Ah [Note2] Joyst Left
] }
4Bh LeftArrow 7Bh [Note2] Joyst Up
Enter
4Ch Keypad 5
7Ch [Note2] Joyst Down
Ctrl
4Dh RightArrow
7Dh [Note2] right mouse
A
4Eh Grey+
7Eh [Note2] left mouse
S
4Fh End
D
50h DownArrow
F
51h PgDn
G
52h Ins
H
53h Del
J
54h SysReq
---non-key codes--K
55h [Note1] F11 00h kbd buffer full
L
56h left \| (102-key)
; :
57h F11
AAh self-test complete
' "
58h F12
E0h prefix code
` ~
59h [Note1] F15 E1h prefix code
Left Shift
5Ah PA1
EEh ECHO
\ |
5Bh F13 (LWin)
F0h prefix code (key break)
Z
5Ch F14 (RWin)
FAh ACK
X
5Dh F15 (Menu)
FCh diag failure (MF-kbd)
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
-17-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
2Eh C
FDh diag failure (AT-kbd)
2Fh V
FEh RESEND
30h B
FFh kbd error/buffer full
Notes: scan codes 56h-E1h are only available on the extended (101/102-key)
keyboard and Host Connected (122-key) keyboard; scan codes 5Bh-5Dh
are only available on the 122-key keyboard and the Microsoft Natural
Keyboard; scan codes 5Eh-76h are only available on the 122-key
keyboard
in the default configuration, break codes are the make scan codes with
the high bit set; make codes 60h,61h,70h, etc. are not available
because the corresponding break codes conflict with prefix codes
(code 2Ah is available because the self-test result code AAh is only
sent on keyboard initialization). An alternate keyboard
configuration can be enabled on AT and later systems with enhanced
keyboards, in which break codes are the same as make codes, but
prefixed with an F0h scan code
prefix code E0h indicates that the following make/break code is for a
"gray" duplicate to a key which existed on the original PC keyboard;
prefix code E1h indicates that the following make code has no
corresponding break code (currently only the Pause key generates no
break code)
the Microsoft Natural Keyboard sends make codes 5Bh, 5Ch, and 5Dh
(all with an E0h prefix) for the Left Windows, Right Windows, and
Menu keys on the bottom row
the European "Cherry G81-3000 SAx/04" keyboard contains contacts for
four additional keys, which can be made available by a user
modification; the three new keys located directly below the cursor
pad's Delete, End, and PgDn keys send make codes 66h-68h (F19-F21);
the fourth new key, named <delta>, sends make code 73h
the SysReq key is often labeled SysRq
the "Accord" ergonomic keyboard with optional touchpad (no other
identification visible on keyboard or in owner's booklet) has an
additional key above the Grey- key marked with a left-pointing
triangle and labeled "Fn" in the owner's booklet which returns
scan codes E0h 68h on make and E0h E8h on break
the "Preh Commander AT" keyboard with additional F11-F22 keys treats
F11-F20 as Shift-F1..Shift-F10 and F21/F22 as Ctrl-F1/Ctrl-F2; the
Eagle PC-2 keyboard with F11-F24 keys treated those additional keys
in the same way
[Note1] the "Cherry G80-0777" keyboard has additional F11-F15 keys
which generate make codes 55h-59h; some other extended keyboards
D:\D\inter61a\INTERRUP.A
-18-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
generate codes 55h and 56h for F11 and F12, which cannot be managed
by standard DOS keyboard drivers
[Note2] the Schneider/Amstrad PC1512 PC keyboards contain extra keys,
a mouse, and a digital joystick, which are handled like extra keys.
The joystick's motion scancodes are converted into standard arrow
keys by the BIOS, and the joystick and mouse button scan codes are
converted to FFFFh codes in the BIOS keyboard buffer
(see CMOS 15h"AMSTRAD").
In addition to the keys listed in the table above, there are
Del-> (delete forward) 70h
Enter
74h
SeeAlso: #00602 at INT 16/AX=6F07h,#03214 at INT 4A/AH=05h
--------C-09--------------------------------INT 09 C - CPU-generated (80286,80386) - PROCESSOR EXTENSION PROTECTION ERROR
Desc: called if the coprocessor attempts to access memory outside a segment
boundary; it may occur at an arbitrary time after the coprocessor
instruction was issued
Notes: until the condition is cleared or the coprocessor is reset, the only
coprocessor instruction which may be used is FNINIT; WAIT or other
coprocessor instructions will cause a deadlock because the
coprocessor is still busy waiting for data
for the 486+, a coprocessor protection error generates an INT 0D
SeeAlso: INT 07"CPU"
--------*-09--------------------------------INT 09 P - internal hardware - RESERVED BY Intel (80486)
Note: this exception has been moved to INT 0D
SeeAlso: INT 09"CPU",INT 0D
--------H-0A--------------------------------INT 0A C - IRQ2 - LPT2 (PC), VERTICAL RETRACE INTERRUPT (EGA,VGA)
Notes: the TOPS and PCnet adapters use this interrupt request line by default
DOS 3.2 revectors IRQ2 to a stack-switching routine; DOS 3.3+ does so
unless STACKS=0 has been set in CONFIG.SYS. MS/PC-DOS 3.3+ use the
IBM Interrupt Sharing Protocol (see #02568) when hooking this IRQ
on ATs and above, the physical data line for IRQ2 is labeled IRQ9 and
connects to the slave 8259. The BIOS redirects the interrupt for
IRQ9 back here.
under DESQview, only the INT 15h vector and BASIC segment address (the
word at 0000h:0510h) may be assumed to be valid for the handler's
process
many VGA boards do not implement the vertical retrace interrupt,
including the IBM VGA Adapter where the traces are either cut or
D:\D\inter61a\INTERRUP.A
-19-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
removed
SeeAlso: INT 52"DESQview",INT 5A"DoubleDOS",INT 71,INT 7A"GO32"
--------H-0A--------------------------------INT 0A C - IRQ2 - Tandy 1000-series HARD DISK
Notes: this interrupt may be masked by setting bit 2 on I/O port 21h
the Tandy 1000, 1000A, and 1000HD use IRQ2 for the hard disk; the
1000EX, HX, RLX, RLX-HD, RLX-B, RLX-HD-B use IRQ5 instead; the
1000RL, RL-HD, SL, SL/2, TL, TL/2, and TL/3 are jumper-selectable
for either IRQ2 or IRQ5 (default IRQ5); the 1000SX and TX are
DIP-switch selectable for IRQ2 or IRQ5 (default IRQ2); the RSX and
RSX-HD use IRQ14. Tandy systems which use IRQ2 for the hard disk
interrupt use IRQ5 for vertical retrace.
SeeAlso: INT 52"DESQview",INT 5A"DoubleDOS",INT 71
--------H-0A--------------------------------INT 0A - IRQ2 - ROLAND MPU MIDI INTERFACE
Note: newer Roland cards and MIDI interfaces by other manufacturers use
a jumper-selectable IRQ, but software and hardware generally defaults
to IRQ2
SeeAlso: INT 52"DESQview",INT 5A"DoubleDOS",INT 71,INT 7A"GO32"
--------C-0A--------------------------------INT 0A CP - CPU-generated (80286+) - INVALID TASK STATE SEGMENT
Desc: automatically called during a task switch if the new TSS specified by
the task gate is invalid for any of the following reasons:
TSS limit is less than 43 (80286) or 103 (80386/80486)
LDT selector invalid or segment not present
null SS selector, or SS selector outside LDT/GDT limit
stack segment is read-only
stack segment DPL differs from new CPL, or RPL <> CPL
CS selector is outside LDT/GDT limit or not code
non-conforming code segment's DPL differs from CPL
conforming code segment's DPL > CPL
DS/ES selectors outside LDT/GDT limit or not readable segments
Note: the handler must use a task gate in order to have a valid TSS under
which to execute; it must also reset the busy bit in the new TSS
SeeAlso: INT 0B"CPU"
--------H-0B--------------------------------INT 0B C - IRQ3 - SERIAL COMMUNICATIONS (COM2)
Desc: automatically asserted by the UART when COM2 needs attention, if the
UART has been programmed to generate interrupts
Notes: the TOPS and PCnet adapters use this interrupt request line as an
alternate
D:\D\inter61a\INTERRUP.A
-20-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
on PS/2s, COM2 through COM8 share this interrupt; on many PC's, COM4
shares this interrupt
may be masked by setting bit 3 on I/O port 21h
DOS 3.3+ revectors IRQ3 to a stack-switching routine unless STACKS=0
has been set in CONFIG.SYS. MS/PC-DOS use the IBM Interrupt Sharing
Protocol (see #02568) when hooking this IRQ
SeeAlso: INT 0C"COM1",INT 53"DESQview",INT 5B"DoubleDOS",INT 7B"GO32"
--------C-0B--------------------------------INT 0B CP - CPU-generated (80286+) - SEGMENT NOT PRESENT
Desc: generated when loading a segment register if the segment descriptor
indicates that the segment is not currently in memory, unless the
segment is an LDT (see INT 0A"CPU") or stack segment (see
INT 0C"CPU") needed by a task switch
Note: may be used to implement virtual memory by loading in segments as they
are accessed, clearing the "not present" bit after loading
SeeAlso: INT 0A"CPU",INT 0E"CPU"
--------h-0B--------------------------------INT 0B - HP 95LX - LOW-LEVEL KEYBOARD HANDLER
Desc: this is the lowest-level keyboard handler on an HP 95LX palmtop
Note: debounces key, places the keycode in I/O register 60h, and calls INT 09
SeeAlso: INT 09,INT 0D"HP 95LX",INT 15/AX=4DD4h
--------H-0C--------------------------------INT 0C C - IRQ4 - SERIAL COMMUNICATIONS (COM1)
Desc: automatically asserted by the UART when COM1 needs attention, if the
UART has been programmed to generate interrupts
BUG: this vector is modified but not restored by Direct Access v4.0, and
may be left dangling by other programs written with the same version
of compiled BASIC
Notes: on many PC's, COM3 shares this interrupt
may be masked by setting bit 4 on I/O port 21h
DOS 3.3+ revectors IRQ4 to a stack-switching routine unless STACKS=0
has been set in CONFIG.SYS. MS/PC-DOS use the IBM Interrupt Sharing
Protocol (see #02568) when hooking this IRQ
SeeAlso: INT 0B"COM2",INT 54"DESQview",INT 5C"DoubleDOS",INT 7C"GO32"
--------C-0C--------------------------------INT 0C C - CPU-generated (80286+) - STACK FAULT
Desc: this interrupt is generated in protected mode on a stack overflow or
underflow, or if an inter-level transition or task switch references
a stack segment marked "not present"; it is generated in real mode
on accessing a word operand at SS:FFFFh
Note: the 80286 will shut down in real mode if SP=1 before a push. On the
D:\D\inter61a\INTERRUP.A
-21-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
PC AT and compatibles, external circuitry generates a reset on
shutdown.
SeeAlso: INT 0B"CPU",INT 0D"CPU"
--------I-0C--------------------------------INT 0C - IBM SYSTEM 36/38 WORKSTATION EMULATION - API POINTER
Desc: the IBM System 36/38 emulator may be invoked through a private API,
whose entry point address (see #00007) is offset 100h in the segment
pointed at by this vector
D:\D\inter61a\INTERRUP.A
(Table 00007)
Call the System 36/38 emulator API entry point with:
AH = function
03h update screen
05h select next session
AL = session number (00h-03h)
Return: AL = session type code
00h not active
01h display session
02h printer session
FEh invalid session number
DS = requested session's data segment (0 if not active)
(see #00008)
Return: ???
Format of System 36/38 emulator's data area:
Offset Size Description (Table 00008)
13Eh BYTE bit flags for status line indicators turned on since this byte
last zerod
13Fh BYTE bit flags for status line indicators turned off since this
byte last set to FFh
140h WORD offset of EBCDIC to ASCII translation
146h WORD offset of EBCDIC screen buffer
148h WORD offset of EC (engineering change) level signature
150h BYTE "KEYI"
151h BYTE 5250 key scan code to be sent to remote
15Bh BYTE "SYSAV"
15Dh BYTE 5250 cursor column
15Eh BYTE 5250 cursor row
167h BYTE "DVCTAD"
178h BYTE "FLAGS"
184h BYTE "SESSNOAD"
-22-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
193h BYTE "STNAD"
198h BYTE "NSDS"
Note: offsets are from the interrupt handler's segment
--------H-0D--------------------------------INT 0D C - IRQ5 - FIXED DISK (PC,XT), LPT2 (AT), reserved (PS/2)
Notes: under DESQview, only the INT 15h vector and BASIC segment address (the
word at 0000h:0510h) may be assumed to be valid for the handler's
process
DOS 3.3+ revectors IRQ5 to a stack-switching routine unless STACKS=0
has been set in CONFIG.SYS. MS/PC-DOS use the IBM Interrupt Sharing
Protocol (see #02568) when hooking this IRQ
the Tandy 1000, 1000A, and 1000HD use IRQ2 for the hard disk; the
1000EX, HX, RLX, RLX-HD, RLX-B, RLX-HD-B use IRQ5 instead; the
1000RL, RL-HD, SL, SL/2, TL, TL/2, and TL/3 are jumper-selectable
for either IRQ2 or IRQ5 (default IRQ5); the 1000SX and TX are
DIP-switch selectable for IRQ2 or IRQ5 (default IRQ2); the RSX and
RSX-HD use IRQ14. Tandy systems which use IRQ2 for the hard disk
interrupt use IRQ5 for vertical retrace.
may be masked by setting bit 5 on I/O port 21h
SeeAlso: INT 0E"IRQ6",INT 0F"IRQ7",INT 55"DESQview",INT 5D"DoubleDOS"
SeeAlso: INT 7D"GO32"
--------H-0D--------------------------------INT 0D C - IRQ5 - Tandy 1000 60 Hz RAM REFRESH
Desc: used to ensure that the dynamic RAM retains its contents in earlier
1000-series models; later models use normal DMA for RAM refresh
(some early models have no DMA unless it is added via an expansion
card)
SeeAlso: INT 55
--------h-0D--------------------------------INT 0D - HP 95LX - INFRARED INTERRUPT
Desc: this interrupt is used to perform communications over the infrared
data link
SeeAlso: INT 0B"HP 95LX",INT 0E"HP 95LX",INT 15/AX=4DD4h
--------C-0D--------------------------------INT 0D C - CPU-generated (80286+) - GENERAL PROTECTION VIOLATION
Desc: the CPU generates this interrupt when it detects a protection violation
which does not fit under any other category having a separate
interrupt
Notes: called in real mode when
an instruction accesses a memory operand extending beyond offset
FFFFh (i.e. WORD at FFFFh or DWORD at FFFDh or higher) in segment
-23-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
CS, DS, ES, FG, or GS
a PUSH MEM or POP MEM instruction contains an invalid bit encoding
in the second byte
an instruction exceeds the maximum length allowed (10 bytes for
80286, 15 bytes for 80386/80486)
an instruction wraps from offset FFFFh to offset 0000h
called in protected mode on protection violations not covered by INT 06
through INT 0C, including
segment limit violations
write to read-only segments
accesses using null DS or ES selectors
accesses to segments with privilege greater than CPL
wrong descriptor type
called on 80486 protected-mode floating-point protection fault
SeeAlso: INT 09"80486",INT 0C"STACK"
--------H-0E--------------------------------INT 0E C - IRQ6 - DISKETTE CONTROLLER
Desc: this interrupt is generated by the floppy disk controller on
completion of an operation
Notes: default handler is at F000h:EF57h in IBM PC and 100%-compatible BIOSes
may be masked by setting bit 6 on I/O port 21h
DOS 3.3+ revectors IRQ6 to a stack-switching routine unless STACKS=0
has been set in CONFIG.SYS. MS/PC-DOS use the IBM Interrupt Sharing
Protocol (see #02568) when hooking this IRQ
SeeAlso: INT 0D"IRQ5",INT 56"DESQview",INT 5E"DoubleDOS",INT 7E"GO32"
--------C-0E--------------------------------INT 0E C - CPU-generated (80386+ native mode) - PAGE FAULT
Desc: this interrupt is generated in protected and virtual-86 modes on
attempting to access a 4K memory page whose page table entry has
the "present" bit cleared
Notes: used to implement virtual memory--when the page fault occurs, the
operating system can load the appropriate page from disk
a protected-mode program written in the Flat memory model will often
generate this interrupt (typically reported as an Exception #14 or
Exception 0E with a register dump) when dereferencing an
uninitialized or corrupted pointer
SeeAlso: INT 0B"CPU"
--------h-0E--------------------------------INT 0E C - HP 95LX - EXTERNAL CARD INTERRUPT
SeeAlso: INT 0D"HP 95LX",INT 0F"HP 95LX",INT 15/AX=4DD4h
--------H-0F--------------------------------D:\D\inter61a\INTERRUP.A
-24-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
INT 0F C - IRQ7 - PARALLEL PRINTER
Desc: this interrupt is generated by the LPT1 printer adapter when the
printer becomes ready
Notes: most printer adapters do not reliably generate this interrupt
the 8259 interrupt controller generates an interrupt corresponding to
IRQ7 when an error condition occurs
SeeAlso: INT 0D"IRQ5",INT 57"DESQview",INT 5F"DoubleDOS",INT 7F"GO32"
SeeAlso: MEM 0040h:006Bh
--------h-0F--------------------------------INT 0F C - HP 95LX - REAL-TIME CLOCK
SeeAlso: INT 0E"HP 95LX",INT 15/AX=4DD4h,INT 70"IRQ8"
--------C-10--------------------------------INT 10 C - CPU-generated (80286+) - COPROCESSOR ERROR
Desc: this interrupt is generated by the CPU when the -ERROR pin is asserted
by the coprocessor
Note: AT's and clones usually wire the coprocessor to use IRQ13, but not all
get it right
SeeAlso: INT 09"hardware",INT 75
--------V-10--------------------------------INT 10h - LIRVGA19 - CHAR HEIGHT HOOK
Desc: LIRVGA19.COM fixes display problems on some notebooks by hooking
INT 10h and resetting the BIOS character height (MEM 0040h:0085h)
to 10h on return, if it happens to be greater than 10h.
Program: LIRVGA19.COM is part of the Lithuanian LIR codepage support package
developed by LABAS u.a.b.
SeeAlso: INT 10/AX=5555h/BX=BBBBh,MEM 0040h:0085h
--------V-1000------------------------------INT 10 - VIDEO - SET VIDEO MODE
AH = 00h
AL = desired video mode (see #00010)
Return: AL = video mode flag (Phoenix, AMI BIOS)
20h mode > 7
30h modes 0-5 and 7
3Fh mode 6
AL = CRT controller mode byte (Phoenix 386 BIOS v1.10)
Desc: specify the display mode for the currently active display adapter
InstallCheck: for Ahead adapters, the signature "AHEAD" at C000h:0025h
for Paradise adapters, the signature "VGA=" at C000h:007Dh
for Oak Tech OTI-037/057/067/077 chipsets, the signature "OAK VGA" at
C000h:0008h
for ATI adapters, the signature "761295520" at C000h:0031h; the byte
-25-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
at C000h:0043h indicates the chipset revision:
31h for 18800
32h for 18800-1
33h for 18800-2
34h for 18800-4
35h for 18800-5
62h for 68800AX (Mach32) (see also #00732)
the two bytes at C000h:0040h indicate the adapter type
"22" EGA Wonder
"31" VGA Wonder
"32" EGA Wonder800+
the byte at C000h:0042h contains feature flags
bit 1: mouse port present
bit 4: programmable video clock
the byte at C000h:0044h contains additional feature flags if chipset
byte > 30h (see #00009)
for Genoa video adapters, the signature 77h XXh 99h 66h at C000h:NNNNh,
where NNNNh is stored at C000h:0037h and XXh is
00h for Genoa 6200/6300
11h for Genoa 6400/6600
22h for Genoa 6100
33h for Genoa 5100/5200
55h for Genoa 5300/5400
for SuperEGA BIOS v2.41+, C000h:0057h contains the product level
for Genoa SuperEGA BIOS v3.0+, C000h:0070h contains the signature
"EXTMODE", indicating support for extended modes
Notes: IBM standard modes do not clear the screen if the high bit of AL is set
(EGA or higher only)
the Tseng ET4000 chipset is used by the Orchid Prodesigner II, Diamond
SpeedSTAR VGA, Groundhog Graphics Shadow VGA, Boca Super X VGA,
Everex EV-673, etc.
intercepted by GRAFTABL from Novell DOS 7 and Caldera OpenDOS 7.01.
SeeAlso: AX=0070h,AX=007Eh,AX=10E0h,AX=10F0h,AH=40h,AX=6F05h,AH=FFh"GO32"
SeeAlso: INT 33/AX=0028h,INT 5F/AH=00h,INT 62/AX=0001h,MEM 0040h:0049h
Index: installation check;Tseng ET4000|installation check;Ahead video cards
Index: installation check;Oak Technologies|installation check;ATI video cards
Index: installation check;Paradise video|installation check;Genoa video cards
D:\D\inter61a\INTERRUP.A
Bitfields for ATI additional feature flags:
Bit(s) Description (Table 00009)
0 70 Hz non-interlaced display
-26-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
1
2
3
4
6
7
Korean (double-byte) characters
45 MHz memory clock rather than 40 MHz
zero wait states
paged ROMs
no 8514/A monitor support
HiColor DAC
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00010)
Values for video mode:
text/ text pixel pixel colors disply scrn system
grph resol box resolution
pages addr
00h = T 40x25 8x8
320x200 16gray
8
B800 CGA,PCjr,Tandy
= T 40x25 8x14 320x350 16gray
8
B800 EGA
= T 40x25 8x16 320x400
16
8
B800 MCGA
= T 40x25 9x16 360x400
16
8
B800 VGA
01h = T 40x25 8x8
320x200
16
8
B800 CGA,PCjr,Tandy
= T 40x25 8x14 320x350
16
8
B800 EGA
= T 40x25 8x16 320x400
16
8
B800 MCGA
= T 40x25 9x16 360x400
16
8
B800 VGA
02h = T 80x25 8x8
640x200 16gray
4
B800 CGA,PCjr,Tandy
= T 80x25 8x14 640x350 16gray
8
B800 EGA
= T 80x25 8x16 640x400
16
8
B800 MCGA
= T 80x25 9x16 720x400
16
8
B800 VGA
03h = T 80x25 8x8
640x200
16
4
B800 CGA,PCjr,Tandy
= T 80x25 8x14 640x350
16/64
8
B800 EGA
= T 80x25 8x16 640x400
16
8
B800 MCGA
= T 80x25 9x16 720x400
16
8
B800 VGA
= T 80x43 8x8
640x350
16
4
B800 EGA,VGA [17]
= T 80x50 8x8
640x400
16
4
B800 VGA [17]
04h = G 40x25 8x8
320x200
4
.
B800 CGA,PCjr,EGA,MCGA,VGA
05h = G 40x25 8x8
320x200
4gray
.
B800 CGA,PCjr,EGA
= G 40x25 8x8
320x200
4
.
B800 MCGA,VGA
06h = G 80x25 8x8
640x200
2
.
B800 CGA,PCjr,EGA,MCGA,VGA
= G 80x25
.
. mono
.
B000 HERCULES.COM on HGC [14]
07h = T 80x25 9x14 720x350 mono
var B000 MDA,Hercules,EGA
= T 80x25 9x16 720x400 mono
.
B000 VGA
08h = T 132x25 8x8 1056x200
16
.
B800 ATI EGA/VGA Wonder [2]
= T 132x25 8x8 1056x200 mono
.
B000 ATI EGA/VGA Wonder [2]
= G 20x25 8x8
160x200
16
. . PCjr, Tandy 1000
= G 80x25 8x16 640x400 color
. . Tandy 2000
= G 90x43 8x8
720x348 mono
.
B000 Hercules + MSHERC.COM
-27-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
90x45 8x8
720x360 mono
.
B000 Hercules + HERKULES [11]
90x29 8x12 720x348 mono
. . Hercules + HERCBIOS [15]
40x25 8x8
320x200
16
. . PCjr, Tandy 1000
80x25 8x16 640x400 mono
. . Tandy 2000
90x43 8x8
720x348 mono
. . Hercules + HERCBIOS [15]
80x25 8x8
640x200
4
. . PCjr, Tandy 1000
reserved
(EGA BIOS internal use)
80x25 8x8
640x200
16
. . Tandy 1000 SL/TL [13]
reserved
(EGA BIOS internal use)
40x25 8x8
320x200
16
8
A000 EGA,VGA
80x25 8x8
640x200
16
4
A000 EGA,VGA
80x25 8x14 640x350 mono
2
A000 EGA,VGA
80x25 8x14 640x350
4
2
A000 64k EGA
.
.
640x350
16
.
A000 256k EGA,VGA
80x30 8x16 640x480 mono
.
A000 VGA,MCGA,ATI EGA,ATI VIP
80x30 8x16 640x480
16/256K .
A000 VGA,ATI VIP
80x30 8x16 640x480
16/64
.
A000 ATI EGA Wonder
.
.
640x480
16
. . UltraVision+256K EGA
40x25 8x8
320x200 256/256K .
A000 VGA,MCGA,ATI VIP
132x25 Nx16
. 16
.
B800 XGA, IBM Enhanced VGA [3]
132x25 8x16 1056x400
16/256K . . Cirrus CL-GD5420/5422/5426
80x25 8x8
640x200
.
. . Lava Chrome II EGA
.
.
640x400
16
. . Tecmar VGA/AD
80x25 8x14 640x350
.
. . Lava Chrome II EGA
80x25 8x14 640x350
.
. . Lava Chrome II EGA
.
.
800x600
16
. . Tecmar VGA/AD
132x25
.
.
.
. . Tecmar VGA/AD
80x43 8x8
640x348
16
4
B800 Tseng ET4000 BIOS [10]
80x34 8x14 640x480
.
. . Lava Chrome II EGA
80x30 9x16 720x480
16
1
A000 Realtek RTVGA [12]
132x25
.
. mono
.
B000 Cirrus 5320 chipset
132x44 8x8 1056x352 mono
.
B000 Tseng Labs EVA
132x44 9x8 1188x352
4gray
2
B000 Tseng ET3000 chipset
132x44 8x8 1056x352
16/256
2
B000 Tseng ET4000 chipset
80x34 8x14 640x480
.
. . Lava Chrome II EGA
1024x768
16
. . Tecmar VGA/AD
80x43 9x11 720x473
16
1
A000 Realtek RTVGA [12]
132x25 8x14 1056x350 mono
.
B000 Tseng Labs EVA
132x25 9x14 1188x350
4gray
4
B000 Tseng ET3000 chipset
132x25 8x14 1056x350
16/256
4
B000 Tseng ET4000 chipset
132x34
.
. mono
.
B000 Cirrus 5320 chipset
D:\D\inter61a\INTERRUP.A
09h
0Ah
0Bh
0Ch
0Dh
0Eh
0Fh
10h
11h
12h
13h
14h
15h
16h
17h
18h
19h
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
T
T
G
G
G
G
G
T
T
G
T
T
T
T
T
G
G
T
T
T
T
T
-28-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
1Ah =
=
=
=
=
=
1Bh =
=
1Ch =
=
=
1Dh =
=
=
1Eh =
=
1Fh =
20h =
=
=
=
21h =
=
=
=
=
=
=
22h =
=
=
=
=
=
=
=
=
=
=
=
23h =
T
T
T
T
T
G
T
G
T
T
G
T
T
G
T
T
G
T
G
G
G
T
T
T
T
T
G
G
T
T
T
T
T
T
T
T
T
G
G
G
T
80x60
132x28
132x28
132x28
132x44
.
132x25
.
132x25
132x30
.
132x43
132x43
.
132x44
132x60
100x75
132x25
40x16
80x30
120x45
80x25
132x30
132x44
132x44
132x60
80x43
128x48
132x43
132x43
132x44
132x44
132x44
132x44
132x44
132x44
132x44
80x43
96x64
100x37
132x25
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
9x8
720x480
16
1
A000 Realtek RTVGA [12]
8x13 1056x364 mono
.
B000 Tseng Labs EVA
9x13 1188x364
4gray
4
B000 Tseng ET3000 chipset
8x13 1056x364
16/256
4
B000 Tseng ET4000 chipset
.
. mono
.
B000 Cirrus 5320 chipset
.
640x350 256
. . Tecmar VGA/AD
9x14 1188x350
16
1
A000 Realtek RTVGA [12]
.
640x400 256
. . Tecmar VGA/AD
.
.
.
. . Cirrus 5320 chipset
9x16 1188x480
16
1
A000 Realtek RTVGA [12]
.
640x480 256
. . Tecmar VGA/AD
.
.
.
. . Cirrus 5320 chipset
9x11 1188x473
16
1
A000 Realtek RTVGA [12]
.
800x600 256
. . Tecmar VGA/AD
.
.
.
. . Cirrus 5320 chipset
9x8 1188x480
16
1
A000 Realtek RTVGA [12]
8x8
800x600
16
1
A000 Realtek RTVGA
.
. 16
. . Avance Logic AL2101
.
240x128 mono
.
B000 HP 95LX/100LX/200LX
8x16 640x480
16
. . C&T 64310/65530 BIOS
8x16 960x720
16
1
A000 Realtek RTVGA
.
. mono
.
B000 HP 200LX
.
. 16
. . Avance Logic AL2101
9x9 1188x396
16/256K .
B800 WD90C
9x9 1188x396
16
.
B800 Diamond Speedstar 24X
.
. 16
2
B800 Tseng ET4000 chipset [10]
8x8
720x348 mono
.
B000 DESQview 2.x+Hercules [4]
8x16 1024x768
16
1
A000 Realtek RTVGA [12]
.
.
.
. . Allstar Peacock (VGA)
.
. 16
. . Avance Logic AL2101
8x8 1056x352
.
.
B800 Tseng Labs EVA
9x8 1188x352
16/256K 2
B800 Tseng ET3000 chipset
8x8 1056x352
16/256K 2
B800 Tseng ET4000 chipset
8x8 1056x352
.
. . Ahead Systems EGA2001
8x8 1056x352
16
2
B800 Ahead B
8x9 1056x398
16
. . STB Lightspeed ET4000/W32P
.
. 16
. . Orchid Prodesigner VGA
8x8
720x348 mono
.
B800 DESQview 2.x+Hercules [4]
8x16 768x1024 16
1
A000 Realtek RTVGA
8x16 800x600
16
. . C&T 64310/65530 BIOS
6x14 792x350
.
.
B800 Tseng Labs EVA
-29-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
24h
25h
26h
27h
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
T
T
T
T
T
T
T
T
T
G
T
T
T
T
T
T
T
T
T
G
G
T
G
G
G
G
G
G
G
G
T
T
T
T
T
G
G
G
T
G
G
132x25
132x25
132x25
132x25
132x25
132x25
132x28
132x28
132x60
128x48
80x30
132x25
132x25
132x28
132x28
132x28
132x28
132x28
132x28
64x32
128x48
80x43
80x60
80x60
.
80x60
80x60
.
.
.
80x60
80x60
80x60
80x60
80x60
80x60
80x60
.
132x25
.
.
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
9x14 1188x350
16/256K 4
B800 Tseng ET3000 chipset
8x14 1056x350
16/256
4
B800 Tseng ET4000 chipset
8x14 1056x350
.
. . Ahead Systems EGA2001
8x14 1056x350
16
4
B800 Ahead B
8x8 1056x200
16
.
B800 ATI EGA Wonder,ATI VIP
.
.
.
. . Cirrus 5320 chipset
.
.
.
. . Allstar Peacock (VGA)
.
. 16
. . Orchid Prodesigner VGA
.
. 16
. . Avance Logic AL2101
8x16 1024x768
4
1
A000 Realtek RTVGA
.
. 16
. . Avance Logic AL2101
.
.
.
. . Allstar Peacock (VGA)
.
. 16
. . Orchid Prodesigner VGA
6x13 792x364
.
.
B800 Tseng Labs EVA
9x13 1188x364
16/256K 4
B800 Tseng ET3000 chipset
8x12 1056x336
16
1
B800 Ahead B
8x13 1056x364
16/256K 4
B800 Tseng ET4000 chipset
8x14 1056x392
16
. . STB Lightspeed ET4000/W32P
.
.
.
. . Cirrus 5320 chipset
8x16 512x512 256
1
A000 Realtek RTVGA
8x16 1024x768
16
. . C&T 64310/65530 BIOS
.
. 16
. . Avance Logic AL2101
8x8
640x480
.
.
A000 Tseng Labs EVA
8x8
640x480
16/256K 1
A000 Tseng ET3000/4000 chipset
.
640x480
16
. . VEGA VGA
8x8
640x480
16
.
A000 Orchid Prodesigner VGA
8x8
640x480
16
1
A000 Ahead B (same as 26h)
.
640x480
16
. . NEC GB-1
.
640x480
16
. . Cirrus 5320 chipset
.
640x400 256
. . Realtek RTVGA
8x8
640x480
.
. . Tseng Labs EVA
8x8
640x480
16/256K 3
B800 Tseng ET3000/4000 chipset
.
.
.
. . Allstar Peacock (VGA)
.
. 16
. . Orchid ProDesigner VGA
.
. 16
. . Avance Logic AL2101
8x8
640x480
.
. . Ahead Systems EGA2001
8x8
640x480
16
1
A000 Ahead B (same as 25h)
.
640x480 256
. . Realtek RTVGA
8x8 1056x200 mono
.
B000 ATI EGA Wonder,ATI VIP
.
720x512
16
. . VEGA VGA
.
720x512
16
. . Genoa
-30-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
100x75 8x8
800x600 256
1
A000 Realtek RTVGA [12]
.
.
960x720
16
. . Avance Logic AL2101
???x??? .
.
.
. . VEGA VGA
.
.
512x512 256
. . Avance Logic AL2101
.
.
1024x768 256
. . Realtek RTVGA (1meg)
160x64 8x16 1280x1024 16
. . Chips&Technologies 64310 [1]
.
.
640x400 256
. . Avance Logic AL2101
.
.
800x600
16
. . VEGA VGA
100x37 8x16 800x600
16
.
A000 Orchid
.
.
800x600
16
.
A000 STB,Genoa,Sigma
.
.
800x600
16
. . Allstar Peacock (VGA)
100x37 8x16 800x600
16/256K 1
A000 Tseng ET3000/4000 chipset
.
.
800x600 ???
. . EIZO MDB10
.
.
800x600
16
. . Cirrus 5320 chipset
NA
.
800x600
16
. . Compaq QVision 1024/1280
.
.
1024x1024 256
. . Realtek RTVGA BIOS v3.C10
100x40
.
.
.
. . Allstar Peacock (VGA)
100x40 8x16 800x640
16
. . Orchid Prodesigner VGA
100x40 8x15 800x600
16/256K 4
B800 Tseng ET3000/4000 chipset
100x40 8x15 800x600
16
. . STB Lightspeed ET4000/W32P
.
.
640x480 256
. . Avance Logic AL2101
.
.
1280x1024 16
. . Realtek RTVGA
.
.
800x600
16
. . Avance Logic AL2101
.
.
800x600 256
. . Avance Logic AL2101
.
.
640x350 256
. . VEGA VGA
.
.
640x350 256/256K .
A000 Orchid, Genoa, STB
80x25 8x14 640x350 256/256K 1
A000 Tseng ET3000/4000 chipset
.
.
640x350 256
. . Cirrus 5320 chipset
80x25 8x14 640x350 256
. . STB Lightspeed ET4000/W32P
.
.
768x1024 16
. . Avance Logic AL2101
.
.
640x480 256
. . VEGA VGA
80x30 8x16 640x480 256/256K
.
A000 Orchid
.
.
640x480 256/256K
.
A000 STB,Genoa,Sigma
80x30 8x16 640x480 256/256K
1
A000 Tseng ET3000/4000 chipset
.
.
640x480 256/256K
. . Compaq QVision 1024/1280
.
.
768x1024 256
. . Avance Logic AL2101
160x50 8x8 1280x400
16
4
B800 Ahead B (Wizard/3270)
.
.
720x512 256
. . VEGA VGA
.
.
720x512 256
. . Genoa
80x25 8x16 640x400 256/256K
1
A000 Tseng ET4000 chipset
.
.
1024x768
4
. . Avance Logic AL2101
D:\D\inter61a\INTERRUP.A
28h
29h
2Ah
2Bh
2Ch
2Dh
2Eh
2Fh
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
G
G
T
G
G
G
G
G
G
G
G
G
G
G
G
G
T
T
T
T
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
T
G
G
G
G
-31-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
30h =
=
=
=
=
=
=
=
=
31h =
32h =
=
=
33h =
=
34h =
=
=
36h =
=
=
37h =
=
=
=
=
=
=
=
38h =
=
=
=
=
39h =
3Ah =
3Bh =
3Ch =
3Dh =
=
3Eh =
G
G
G
G
G
G
G
G
G
G
T
G
G
T
T
T
G
G
G
G
G
T
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
80x30
.
.
.
100x37
.
.
100x37
.
.
80x34
.
100x37
132x44
80x34
80x66
.
128x48
.
.
.
132x44
.
128x48
.
.
128x48
.
.
.
128x48
.
.
160x64
.
.
.
.
.
128x64
.
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
8x16 640x480 256
. . C&T 64310/65530 BIOS
.
.
.
.
B800 AT&T 6300
.
720x350
2
. . 3270 PC
.
800x600 256
. . VEGA VGA
8x16 800x600 256/256K
.
A000 Orchid
.
800x600 256/256K
.
A000 STB,Genoa,Sigma
.
800x600 256
. . Cardinal
8x16 800x600 256/256K
1
A000 Tseng ET3000/4000 chipset
.
1024x768
16
. . Avance Logic AL2101
.
1024x768 256
. . Avance Logic AL2101
8x10
. 16
4
B800 Ahead B (Wizard/3270)
.
640x480 256
. . Compaq QVision 1024/1280
8x16 800x600 256
. . C&T 64310/65530 BIOS
8x8
. 16
.
B800 ATI EGA Wonder,ATI VIP
8x8
. 16
4
B800 Ahead B (Wizard/3270)
8x8
. 16
4
B800 Ahead B (Wizard/3270)
.
800x600 256
. . Compaq QVision 1024/1280
8x16 1024x768 256
. . Chips&Technologies 64310
.
960x720
16
. . VEGA VGA, STB
.
960x720
16
.
A000 Tseng ET3000 only
.
1280x1024 16
. . Avance Logic AL2101
8x8
. mono
.
B800 ATI EGA Wonder,ATI VIP
.
1024x768
16
. . VEGA VGA
8x16 1024x768
16
.
A000 Orchid
.
1024x768
16
.
A000 STB,Genoa,Sigma
.
1024x768
16
. . Definicon
8x16 1024x768
16
1
A000 Tseng ET3000/4000 chipset
.
1024x768
16
. . Compaq QVision 1024/1280
.
1280x1024 256
. . Avance Logic AL2101
.
1024x768 256
. . STB VGA/EM-16 Plus (1MB)
8x16 1024x768 256/256K 1
A000 Tseng ET4000 chipset
.
1024x768 256
. . Orchid ProDesigner II
.
1024x768 256
. . Compaq QVision 1024/1280
8x16 1280x1024 256
. . Chips&Technologies 64310 [1]
.
1280x1024 16
. . Compaq QVision 1280
.
1280x1024 256
. . Compaq QVision 1280
.
512x480 256
. . Compaq QVision 1024/1280
.
640x400
64K
. . Compaq QVision 1024/1280
.
1280x1024 16
. . Definicon
8x16 1280x1024 16
1
A000 Tseng ET4000 v3.00 [1,7]
.
1280x961
16
. . Definicon
-32-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
3Fh
40h
41h
42h
43h
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
G
G
G
T
T
T
T
T
T
G
G
G
G
G
G
T
T
T
T
T
T
T
G
G
G
G
T
T
T
T
T
T
G
G
G
G
T
T
T
T
T
.
.
.
80x43
80x43
80x43
100x30
100x30
80x25
.
80x25
80x25
80x25
80x30
.
132x25
132x25
132x25
100x50
100x50
80x34
80x34
.
.
80x30
80x25
132x43
132x43
132x43
80x34
100x60
100x60
80x25
.
80x25
100x37
80x60
80x60
80x60
80x45
100x75
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
640x480
64K
. . Compaq QVision 1024/1280
1280x1024 256
. . Hercules ??? (ET4000W32)
800x600
64K
. . Compaq QVision 1024/1280
.
.
.
. . VEGA VGA, Tecmar VGA/AD
.
.
.
. . Video7 V-RAM VGA
.
.
.
. . Tatung VGA
.
. 16
. . MORSE VGA
.
.
.
. . Cirrus 510/520 chipset
.
720x350 mono
. . Genoa SuperEGA BIOS 3.0+
.
320x200
64K
. . Avance Logic AL2101
8x16 640x400
2
1
B800 AT&T 6300, AT&T VDC600
8x16 640x400
2
1
B800 Olivetti Quaderno
8x16 640x400
2
1
B800 Compaq Portable
8x16 640x480 32K
. . Chips&Technologies 64310
.
1024x768
64K
. . Compaq QVision 1280
.
.
.
. . VEGA VGA
.
.
.
. . Tatung VGA
.
.
.
. . Video7 V-RAM VGA
.
. 16
. . MORSE VGA
.
.
.
. . Cirrus 510/520 chipset
9x14 720x476
16/256K .
B800 WD90C
9x14
. 16
.
B800 Diamond Speedstar 24X
.
512x512
64K
. . Avance Logic AL2101
.
640x200
16
1 . AT&T 6300
8x16 640x480
64K
. . Chips&Technologies 64310
.
720x348 mono
.
B000 Genoa SuperEGA BIOS 3.0+
.
.
.
. . VEGA VGA
.
.
.
. . Tatung VGA
.
.
.
. . Video7 V-RAM VGA
9x10
.
4
4
B800 Ahead B (Wizard/3270)
.
. 16
. . MORSE VGA
.
.
.
. . Cirrus 510/520 chipset
8x16 640x400
16
. . AT&T 6300, AT&T VDC600
.
640x400
64K
. . Avance Logic AL2101
.
720x348 mono
.
B800 Genoa SuperEGA BIOS 3.0+
8x16 800x600
32K
. . Chips&Technologies 64310
.
.
.
. . VEGA VGA
.
.
.
. . Tatung VGA
.
.
.
. . Video7 V-RAM VGA
9x8
.
4
4
B800 Ahead B (Wizard/3270)
.
. 16
. . MORSE VGA
.
.
.
-33-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
44h
45h
46h
47h
48h
49h
4Bh
4Dh
4Eh
4Fh
50h
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
T 80x29
G
.
G
.
G 100x37
disable
T 100x60
T 100x60
T 100x60
T 80x32
G
.
T 132x28
T 132x28
T 80x44
T 132x25
T 132x25
G 100x40
T 132x29
T 132x29
T 132x28
T 132x28
G 100x37
T 132x32
T 132x32
G 80x50
G 80x50
T 132x44
T 132x44
G 80x30
G 80x30
G 100x37
T 120x25
G
.
G 128x48
T 120x43
T 80x60
G
.
G 144x54
T 132x25
T 132x60
G
.
T 80x30
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
.
720x348 mono
. . Genoa SuperEGA BIOS 3.0+
. 640x200 of 640x400 viewport
AT&T 6300 (unsupported)
.
640x480
64K
. . Avance Logic AL2101
8x16 800x600
64K
. . Chips&Technologies 64310
VDC and DEB output
. AT&T 6300
.
.
.
. . VEGA VGA
.
.
.
. . Tatung VGA
.
.
.
. . Video7 V-RAM VGA
.
720x352 mono
. . Genoa SuperEGA BIOS 3.0+
.
800x600
64K
. . Avance Logic AL2101
.
.
.
. . Tatung VGA
.
.
.
. . Video7 V-RAM VGA
.
720x352 mono
. . Genoa SuperEGA BIOS 3.0+
8x14
. mono
. . Genoa 6400
9x14
. mono
. . Genoa SuperEGA BIOS 3.0+
8x15 800x600
2
. . AT&T VDC600
8x12
. mono
. . Genoa 6400
9x12
. mono
. . Genoa SuperEGA BIOS 3.0+
9x16 1188x448
16/256K .
B800 WD90C
9x16
. 16
.
B800 Diamond Speedstar 24X
8x16 800x600
16
. . AT&T VDC600
8x12
. mono
. . Genoa 6400
9x11
. mono
. . Genoa SuperEGA BIOS 3.0+
8x8
640x400
2
.
B800 AT&T 6300, AT&T VDC600
8x8
640x400
2
.
B800 Olivetti Quaderno
8x8
. mono
. . Genoa 6400
9x8
. mono
. . Genoa SuperEGA BIOS 3.0+
8x16 640x480
.
. . Lava Chrome II EGA
8x16 640x480
.
.
A000 Diamond Stealth64 Video 2xx1
8x16 800x600
.
.
A000 Diamond Stealth64 Video 2xx1
.
.
.
. . VEGA VGA
.
512x480
16M
. . Compaq QVision 1024/1280
8x16 1024x768
.
.
A000 Diamond Stealth64 Video 2xx1
.
.
.
. . VEGA VGA
8x8
. 16/256K .
B800 Oak OTI-067/OTI-077 [8]
.
640x400
16M
. . Compaq QVision 1024/1280
8x16 1152x864
.
.
A000 Diamond Stealth64 Video 2xx1
.
.
.
. . VEGA VGA
.
.
.
. . some Oak Tech VGA [8]
.
640x480
16M
. . Compaq QVision 1280
8x16
. 16/256K .
B800 Trident TVGA 8800/8900
-34-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
80x34
.
.
.
. . Lava Chrome II EGA
80x43
.
. mono
. . VEGA VGA
132x25 9x14
. mono
. . Ahead Systems EGA2001
132x25 9x14
.
4
4
B800 Ahead B
132x25 8x14
. 16
8
B800 OAK Technologies VGA-16
132x25 8x14
. 16/256K .
B800 Oak OTI-037/067/077 [8]
132x25 8x14 1056x350
16
8
B800 UM587 chipset
132x30
.
. 16
. . MORSE VGA
132x30
.
.
.
. . Cirrus 510/520 chipset
80x30 8x16 640x480
16
. . Paradise EGA-480
80x30 8x16 640x480
16
. . NEL Electronics BIOS
80x30 8x16 640x480
16M
. . Chips&Technologies 64310
.
.
640x480 mono???
. . Taxan 565 EGA
40x25 8x8
320x200
.
. . Genoa SuperEGA BIOS 3.0+
80x30 8x16
.
.
. . Paradise EGA-480
80x30 9x16
.
.
. . NEL Electronics BIOS
80x30
.
.
.
. . Lava Chrome II EGA
80x43 8x11
. 16/256K .
B800 Trident TVGA 8800/8900
132x25
.
. mono
. . VEGA VGA
132x28 9x12
.
4
4
B800 Ahead B
132x43 8x8
. 16
5
B800 OAK Technologies VGA-16
132x43 8x8
. 16/256K .
B800 Oak OTI-037/067/077
132x43 8x8 1056x344
16
5
B800 UM587 chipset
132x50
.
. 16
. . MORSE VGA
132x50
.
.
.
. . Cirrus 510/520 chipset
80x34 8x14 640x480
16
. . ATI EGA Wonder
80x25 8x8
640x200
.
. . Genoa SuperEGA BIOS 3.0+
80x60
.
.
.
. . Lava Chrome II EGA
80x60 8x8
. 16/256K .
B800 Trident TVGA 8800/8900
132x43
.
. mono
. . VEGA VGA
132x44 9x8
. mono
. . Ahead Systems EGA2001
132x44 9x8
.
4
2
B800 Ahead B
132x60
.
. 16
. . MORSE VGA
132x60
.
.
.
. . Cirrus 510/520 chipset
80x25 8x19 640x480
16
1
A000 AX VGA (Kanji&superimpose)
94x29 8x14 752x410
16
. . ATI EGA Wonder
100x75 8x8
800x600
16
1
A000 OAK Technologies VGA-16
100x75 8x8
800x600
16
.
A000 Oak OTI-037 chipset [8]
100x37 8x16 800x600
16
.
A000 Oak OTI-067/077 chips [8]
100x75 8x8
800x600
16
.
A000 UM587 chipset
128x30 8x16 1024x480
16
. . NEL Electronics BIOS
D:\D\inter61a\INTERRUP.A
=
=
=
=
=
=
=
=
=
=
=
=
=
=
51h =
=
=
=
=
=
=
=
=
=
=
=
=
52h =
=
=
=
=
=
=
=
=
=
=
=
=
=
T
T
T
T
T
T
T
T
T
G
G
G
G
G
T
T
T
T
T
T
T
T
T
T
T
G
G
T
T
T
T
T
T
T
G
G
G
G
G
G
G
-35-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
80x25 8x16
.
.
. . NEL Electronics BIOS
80x60
.
. 16
. . MORSE VGA
80x60
.
.
.
. . Cirrus 510/520 chipset
132x25 8x14
. 16/256K .
B800 Trident TVGA 8800/8900
132x43
.
.
.
. . Lava Chrome II EGA
80x25 8x19 640x480
16
1
A000 AX VGA (Kanji, no superimp.)
.
.
640x480 256
. . Oak VGA
80x30 8x16 640x480 256
.
A000 Oak OTI-067/OTI-077 [8]
100x40 8x14 800x560
16
. . ATI EGA Wonder,ATI VIP
.
.
.
.
. . AX PC
132x25
.
.
.
. . Lava Chrome II EGA
132x30 8x16
. 16/256K .
B800 Trident TVGA 8800/8900
132x43 8x8
.
.
. . Paradise EGA-480
132x43 8x8
.
.
. . NEL Electronics BIOS
132x43 7x9
. 16/256K .
B800 Paradise VGA
132x43 8x9
. 16/256K .
B800 Paradise VGA on multisync
132x43
.
.
.
. . Taxan 565 EGA
132x43
.
.
.
. . AST VGA Plus
132x43
.
.
.
. . Hewlett-Packard D1180A
132x43 7x9
. 16
. . AT&T VDC600
132x43 9x9 1188x387
16/256K .
B800 WD90C
132x43 9x9 1188x387
16/256K .
B800 Diamond Speedstar 24X
132x43 9x9 1188x387
16/256K .
B800 Diamond Stealth 24
132x43 8x8
.
.
.
B800 Diamond Stealth64 Video 2xx1
132x43 8x8 1056x350
16/256K . . Cirrus CL-GD5420/5422/5426
132x50 8x8
. 16
.
A000 NCR 77C22 [9]
100x42 8x14 800x600
16
.
A000 ATI EGA Wonder, VGA Wonder
100x42 8x14 800x600
16
.
A000 ATI Ultra 8514A, ATI XL
.
.
800x600 256
.
A000 Oak VGA
100x37 8x16 800x600 256
.
A000 Oak OTI-067/077 chips [8]
80x66 8x8
. 16/256K .
A000 ATI VIP
132x25 8x14
.
.
. . Paradise EGA-480
132x25 8x14
.
.
. . NEL Electronics BIOS
132x25 7x16
. 16/256K .
B800 Paradise VGA
132x25 8x16
. 16/256K .
B800 Paradise VGA on multisync
132x25
.
.
.
. . Taxan 565 EGA
132x25
.
.
.
. . AST VGA Plus
132x25
.
.
.
. . Hewlett-Packard D1180A
132x25 7x16
. 16
. . AT&T VDC600
132x25 8x16
. 16
.
A000 NCR 77C22 [9]
132x25 9x16 1188x400
16/256K .
B800 WD90C
D:\D\inter61a\INTERRUP.A
53h =
=
=
=
=
=
=
=
=
=
54h =
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
55h =
=
=
=
=
=
=
=
=
=
=
T
T
T
T
T
G
G
G
G
G
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
G
G
G
G
T
T
T
T
T
T
T
T
T
T
T
-36-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
=
=
=
=
=
=
=
=
=
=
56h =
=
=
=
=
=
=
=
=
=
57h =
=
=
=
=
=
=
=
=
58h =
=
=
=
=
=
=
=
=
=
=
=
T
T
T
T
T
G
G
G
G
G
T
T
T
T
T
T
T
T
G
G
T
T
T
T
T
T
T
T
G
T
T
T
T
G
G
G
G
G
G
G
G
132x25
132x25
132x25
132x25
132x43
94x29
128x48
.
.
128x48
132x43
132x43
132x43
132x43
132x43
132x43
132x50
132x60
.
128x48
132x25
132x25
132x25
132x25
132x25
132x25
132x25
132x25
96x48
80x33
80x32
80x43
132x30
100x75
100x75
100x75
100x75
100x75
.
.
.
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
9x16 1188x400
16/256K .
B800 Diamond Speedstar 24X
9x16 1188x400
16/256K .
B800 Diamond Stealth 24
8x16
.
.
.
B800 Diamond Stealth64 Video 2xx1
8x14 1056x350
16/256K . . Cirrus CL-GD5420/5422/5426
8x11
. 16/256K .
B800 Trident TVGA 8800/8900
8x14 752x410
.
. . Lava Chrome II EGA
8x16 1024x768
16/256K .
A000 ATI VGA Wonder v4+ [5]
.
1024x768
16/256K . . ATI VGA Wonder Plus
.
1024x768
16/256K . . ATI Ultra 8514A,ATI XL
8x16 1024x768
4
.
A000 Oak OTI-067/077 chips [8]
8x8
.
3???
2
B000 NSI Smart EGA+
7x9
.
4
.
B000 Paradise VGA
8x9
.
4
.
B000 Paradise VGA on multisync
.
. mono
. . Taxan 565 EGA
7x9
.
2
. . AT&T VDC600
9x8
.
.
. . NEL Electronics BIOS
8x8
.
4
.
A000 NCR 77C22 [9]
8x8
. 16/256K .
B800 Trident TVGA 8800/8900
.
1024x768
16
.
A000 Oak VGA
8x16 1024x768
16
.
A000 Oak OTI-067/077 chips [8]
8x14
.
3???
4
B000 NSI Smart EGA+
7x16
.
4
.
B000 Paradise VGA
8x16
.
4
.
B000 Paradise VGA on multisync
9x14
.
.
. . NEL Electronics BIOS
.
. mono
. . Taxan 565 EGA
7x16
.
2
. . AT&T VDC600
9x14
. 16/256K .
B800 Trident TVGA 8800/8900
8x16
.
4
.
A000 NCR 77C22 [9]
8x16 768x1024 16
.
A000 Oak OTI-067/077 chips [8]
8x14
. 16
.
B800 ATI EGA Wonder,ATI VIP
9x16
. 16
. . Genoa 6400
8x8
.
.
. . NEL Electronics BIOS
9x16
. 16/256K .
B800 Trident TVGA 8800/8900
8x8
800x600
16/256K .
A000 Paradise VGA
8x8
800x600
16
. . AT&T VDC600
8x8
800x600
16
.
A000 NCR 77C22 [9]
8x8
800x600
16
.
A000 Diamond Speedstar 24X
8x8
800x600
16/256K .
A000 Paradise VGA, WD90C
.
800x600
16
. . AST VGA Plus, Compaq VGA
.
800x600
16
. . Dell VGA
.
800x600
16
. . Hewlett-Packard D1180A
-37-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
59h
5Ah
5Bh
5Ch
5Dh
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
G
G
G
T
T
T
G
G
G
G
G
G
G
T
T
G
T
G
G
G
G
G
G
G
T
G
G
G
G
G
G
G
G
G
G
T
G
G
G
G
G
.
100x37
160x64
80x43
80x66
132x43
100x75
100x75
.
.
.
100x75
128x48
80x60
132x60
128x48
80x30
.
80x25
.
100x75
.
100x37
128x48
100x37
.
.
80x25
80x25
80x30
80x30
100x75
100x75
100x75
100x37
100x75
80x25
.
.
80x30
80x30
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
.
800x600 ???
. . ELT VGA PLUS 16
8x16 800x600
16/256K .
A000 Cirrus CL-GD5420/5422/5426
8x16 1280x1024 16
.
A000 Oak OTI-077 chipset [8]
9x8
.
.
. . NEL Electronics BIOS
8x8
. 16/256K .
A000 ATI VIP
9x11
. 16/256K .
B800 Trident TVGA 8800/8900
8x8
800x600
2
.
A000 Paradise VGA
8x8
800x600
2
. . AT&T VDC600
.
800x600
2
. . AST VGA Plus, Compaq VGA
.
800x600
2
. . Dell VGA
.
800x600
2
. . Hewlett-Packard D1180A
8x8
800x600
2
.
A000 NCR 77C22 [9]
8x16 1024x768 256
.
A000 Oak OTI-077 chipset [8]
8x8
.
.
. . NEL Electronics BIOS
9x8
. 16/256K .
B800 Trident TVGA 8800/8900
8x16 1024x768
2
.
A000 NCR 77C22 [9]
8x16
.
.
.
B800 ATI VGA Wonder (undoc)
.
640x350 256
. . Genoa 6400
8x16 640x400
32K
.
A000 Oak OTI-067/077 chips [8]
.
800x600
16
. . Maxxon, SEFCO TVGA, Imtec
8x8
800x600
16/256K .
A000 Trident TVGA 8800, 8900
.
800x600 ???
. . Vobis MVGA
8x16 800x600
.
. . NEL Electronics BIOS
8x16 1024x768
16
.
A000 NCR 77C22 [1,9]
8x16
.
.
. . NEL Electronics BIOS
.
640x400 256
. . Logix, ATI Prism Elite
.
640x400 256
. . Maxxon, SEFCO TVGA, Imtec
8x16 640x400 256/256K .
A000 Zymos Poach, Hi Res 512
8x16 640x400 256/256K .
A000 Trident TVGA 8800/8900
8x16 640x480 256
. . Genoa 6400
8x16 640x480
32K
.
A000 Oak OTI-077 chipset [8]
8x8
800x600 256
.
A000 NCR 77C22 [9]
8x8
800x600 256/256K .
A000 WD90C
8x8
800x600 256/256K .
A000 Diamond Speedstar 24X
8x16 800x600 256/256K .
A000 Cirrus CL-GD5420/5422/5426
8x8
.
.
. . NEL Electronics BIOS
8x14 640x350
64K
. . STB Lightspeed ET4000/W32P
.
640x480 256
. . Logix, ATI Prism Elite
.
640x480 256
. . Maxxon, SEFCO TVGA, Imtec
8x16 640x480 256/256K .
A000 Zymos Poach, Hi Res 512
8x16 640x480 256/256K .
A000 Trident TVGA 8800 (512K)
-38-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
128x48 8x16 1024x768
16
.
A000 NCR 77C22 [9]
128x48 8x16 1024x768
16/256K .
A000 WD90C
128x48 8x16 1024x768
16
.
A000 Diamond Speedstar 24X
128x48 8x16 1024x768
16/256K .
A000 Cirrus CL-GD5420/5422/5426
.
.
640x400 256
. . Paradise VGA,VEGA VGA
.
.
640x400 256
. . AST VGA Plus, NCR 77C22
.
.
640x400 256
. . Compaq VGA, Dell VGA
80x25 8x16 640x400 256
. . AT&T VDC600
80x25 8x16 640x400 256
.
A000 NCR 77C22 [9]
80x25 8x16 640x400 256/256K .
A000 WD90C
80x25 8x16 640x400 256/256K .
A000 Diamond Speedstar 24X
.
.
800x600
16
. . Logix, ATI Prism Elite
100x37 8x16 800x600
16
. . NEL Electronics BIOS
100x75 8x8
800x600 256
. . Genoa 6400
100x75 8x8
800x600 256/256K .
A000 Zymos Poach, Trident 8900
100x75 8x8
800x600 256/256K .
A000 Hi Res 512
80x25 8x16 640x400
64K
. . STB Lightspeed ET4000/W32P
.
.
640x480 256
. . Paradise VGA
.
.
640x480 256
. . AST VGA Plus, NCR 77C22
.
.
640x480 256
. . Compaq VGA, Dell VGA
.
.
640x480 256
. . Hewlett-Packard D1180A
80x30 8x16 640x480 256
. . AT&T VDC600 (512K)
80x30 8x16 640x480 256
.
A000 NCR 77C22 [9]
80x30 8x16 640x480 256/256K .
A000 WD90C
80x30 8x16 640x480 256/256K .
A000 Diamond Speedstar 24X
80x30 8x16 640x480 256/256K .
A000 Cirrus CL-GD5420/5422/5426
.
.
1024x768
16
. . Logix, ATI Prism Elite
.
.
1024x768
16
. . Maxxon, Imtec
128x48 8x16 1024x768
16
. . Genoa 6400
128x48 8x16 1024x768
16/256K .
A000 Zymos Poach, Hi Res 512
128x48 8x16 1024x768
16/256K .
A000 Trident TVGA 88/8900 512K
132x25 8x14
. 16/64
8
B800 Quadram Ultra VGA
132x25 8x14
. 16
. . Genoa 6400
132x25 8x14
. 16
. . Genoa SuperEGA BIOS 3.0+
132x25
.
.
.
. . Cirrus 5320 chipset
132x25 8x16 1056x400
16
.
B800 Chips&Technologies chipset
80x??? .
???x400
.
. . Corona/Cordata BIOS 4.10+
80x25 8x16 640x400 256
1
A000 Ahead A, Ahead B
.
.
752x410
.
. . VEGA VGA
.
.
752x410
16
. . Tatung VGA
.
.
752x410
16
. . Video7 V-RAM VGA
D:\D\inter61a\INTERRUP.A
=
=
=
=
5Eh =
=
=
=
=
=
=
=
=
=
=
=
5Fh =
=
=
=
=
=
=
=
=
=
=
=
=
=
=
60h =
=
=
=
=
=
=
=
=
=
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
T
T
T
T
T
G
G
G
G
G
-39-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
=
=
=
=
=
61h =
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
62h =
=
=
=
=
=
=
=
=
=
=
=
=
=
=
63h =
=
=
=
G
G
G
G
G
T
T
T
T
T
T
G
G
G
G
G
G
G
G
G
G
G
T
T
T
T
G
G
G
G
G
G
G
G
G
G
G
T
T
T
G
128x48
128x48
128x48
128x48
144x54
132x29
132x29
132x29
132x50
132x50
132x50
.
80x25
80x25
80x25
80x30
.
.
.
96x64
128x48
144x54
132x32
132x32
132x32
132x43
.
80x30
80x30
80x30
80x30
.
.
.
100x75
128x48
128x48
132x44
132x44
132x44
.
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
8x16 1024x768
4/256K .
A000 Trident TVGA 8900
8x16 1024x768 256/256K .
A000 WD90C
8x16 1024x768 256/256K .
A000 Diamond Speedstar 24X
8x16 1024x768 256/256K .
A000 Cirrus CL-GD5420/5422/5426
8x16 1152x864
.
.
A000 Diamond Stealth64 Video 2xx1
8x12
. 16/64
8
B800 Quadram Ultra VGA
8x8
. 16
. . Genoa 6400
8x8
. 16
. . Genoa SuperEGA BIOS 3.0+
.
.
.
. . Cirrus 5320 chipset
8x8 1056x400
16
.
B800 Chips&Technologies chipset
8x16 1056x800
16
.
B800 Chips&Technologies 64310
.
???x400
.
. . Corona/Cordata BIOS 4.10+
8x16 640x400 256
.
A000 ATI VGA Wonder,VGA Wonder+
8x16 640x400 256
.
A000 ATI Ultra 8514A,ATI XL
8x16 640x400
.
.
A000 Diamond Stealth64 Video 2xx1
8x16 640x480 256
1
A000 Ahead A, Ahead B (512K)
.
720x540
.
. . VEGA VGA
.
720x540
16
. . Tatung VGA
.
720x540
16
. . Video7 V-RAM VGA
8x16 768x1024 16/256K .
A000 Trident TVGA 88/8900 512K
8x16 1024x768 256
.
A000 NCR 77C22 [1,9]
8x16 1152x864
.
.
A000 Diamond Stealth64 Video 2xx1
8x11
. 16/64
6
B800 Quadram Ultra VGA
8x12
. 16
. . Genoa 6400
8x11
. 16
. . Genoa SuperEGA BIOS 3.0+
8x8 1056x344
16
.
B800 C&T 82C450 BIOS
.
640x450
16
. . Cirrus 510/520 chipset
8x16 640x480 256
.
A000 ATI VGA Wonder,VGA Wonder+
8x16 640x480 256
.
A000 ATI Ultra 8514A,ATI XL
8x16 640x480 32K
.
A000 WD90C
8x16 640x480 32K
.
A000 Diamond Speedstar 24X
.
800x600
.
. . VEGA VGA
.
800x600
16
. . Tatung VGA
.
800x600
16
. . Video7 V-RAM VGA
8x8
800x600 256
1
A000 Ahead A, Ahead B (512K)
8x16 1024x768 256/256K .
A000 Trident TVGA 8900, Zymos
8x16 1024x768 256
.
A000 NCR 77C22 [9]
8x8
. 16/64
5
B800 Quadram Ultra VGA
8x8
. 16
. . Genoa 6400
8x8
. 16
. . Genoa SuperEGA BIOS 3.0+
.
720x540
16
. . MORSE VGA
-40-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
64h
65h
66h
67h
68h
69h
6Ah
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
G
G
G
G
G
G
G
T
T
G
G
G
G
G
G
G
G
T
G
G
G
T
T
G
G
G
T
T
G
G
G
G
G
T
T
G
G
G
G
G
G
.
100x42
100x42
.
.
128x48
.
132x60
80x43
.
.
.
.
.
128x48
160x64
160x64
80x50
.
.
128x48
80x50
80x50
.
.
.
80x43
80x43
.
.
128x48
160x64
80x25
132x50
132x50
80x30
.
.
100x75
100x75
.
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
.
720x540
16
. . Cirrus 510/520 chipset
8x14 800x600 256
.
A000 ATI VGA Wonder,VGA Wonder+
8x14 800x600 256
.
A000 ATI Ultra 8514A,ATI XL
.
800x600 32K
.
A000 WD90C
.
800x600 32K
.
A000 Diamond Speedstar 24X
7x16 1024x768 256
1
A000 Ahead B (1MB)
.
1024x768
2
. . Video7 V-RAM VGA
8x8
. 16
. . Genoa 6400
8x8
528x344
16
.
B800 C&T 82C450 BIOS
.
640x480 64K
.
A000 Cirrus CL-GD 5422/5426
.
800x600
16
. . MORSE VGA
.
800x600
16
. . Cirrus 510/520 chipset
.
800x600 ???
. . SAMPO-Mira VGA
.
1024x768
4
. . Video7 V-RAM VGA
8x16 1024x768 256
.
A000 ATI VGA Wonder Plus,ATI XL
8x16 1280x1024 16/256K .
A000 WD90C [1]
8x16 1280x1024 16/256K .
A000 Diamond Speedstar 24X [1]
8x8
528x400
16
.
B800 C&T 82C450 BIOS
.
800x600 64K
.
A000 Cirrus CL-GD 5422/5426
.
1024x768
16
. . Video7 V-RAM VGA
8x16 1024x768
16
.
A000 ATI VGA Wonder
8x8
640x400
16/256K .
B800 WD90C
8x8
. 16
.
B800 Diamond Speedstar 24X
.
640x400 256
. . Tatung VGA
.
640x400 256
. . Video7 V-RAM VGA
.
640x480 32K
.
A000 Cirrus CL-GD 5422/5426
8x8
640x344
16/256K .
B800 WD90C
8x8
. 16
.
B800 Diamond Speedstar 24X
.
640x480 256
. . Video7 V-RAM VGA
.
800x600 32K
.
A000 Cirrus CL-GD 5422/5426
8x16 1024x768
4
.
A000 ATI VGA Wonder
8x16 1280x1024 16
.
A000 NCR 77C22 [1,9]
8x16 640x400
.
.
A000 Diamond Stealth64 Video 2xx1
8x8 1056x400
16/256K .
B800 WD90C
8x8
. 16
.
B800 Diamond Speedstar 24X
8x16 640x480
.
.
A000 Diamond Stealth64 Video 2xx1
.
720x540 256
.
A000 Video7 V-RAM VGA
.
800x600
16
.
A000 VESA standard interface
8x8
800x600
16
.
A000 Genoa 6400
8x8
800x600
16
.
A000 Diamond Speedstar 24X
.
800x600
16
.
A000 Ahead A
-41-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
G 100x75 8x8
800x600
16
1
A000 Ahead B (VESA) [see 71h]
G
.
.
800x600
16
. . Zymos Poach, Hi Res 512
G
.
.
800x600
16
. . Epson LT-386SX in CRT Mode
G
.
.
800x600
16
. . Compuadd 316SL in CRT Mode
G 100x37 8x16 800x600
16/256K .
A000 Cirrus CL-GD5420/5422/5426
G 100x37 8x16 800x600
16
.
A000 Diamond Stealth64 Video 2xx1
G 100x42 8x14 800x600
.
.
A000 ATI VGA Wonder (undoc)
G
.
.
800x600
16
.
A000 Chips&Technologies chipset
G 160x64 8x16 1280x1024 256
.
A000 NCR 77C22 [1,9]
T 100x37 8x16
. 16
. . Genoa 6400
T 100x37 8x16
.
.
. . NEL Electronics BIOS
G 100x37 8x16 800x600
.
.
A000 Diamond Stealth64 Video 2xx1
G 80x30 8x16 640x480
16M
.
A000 Trident 8900CL/BIOS C04
G 100x75 8x8
800x600 256
. . Genoa 6400
G 128x48 8x16 1024x768
2
.
A000 Diamond Stealth64 Video 2xx1
G 160x60 8x16 1280x960
16/256K .
A000 WD90C [1]
G 160x60 8x16 1280x960
16/256K .
A000 Diamond Speedstar 24X [1]
G 160x64 8x16 1280x1024 16/256K .
A000 Cirrus CL-GD 5422/5426 [1]
G 80x25 8x14 640x350
64K
.
A000 STB Lightspeed ET4000/W32P
G 128x48 8x16 1024x768
.
.
A000 Diamond Stealth64 Video 2xx1
G 160x64 8x16 1280x1024 256/256K .
A000 Cirrus CL-GD 5422/5426 [1]
G 40x25 8x8
320x200
64K
.
A000 Cirrus CL-GD 5422/5426
G 160x64 8x16 1280x1024
2
.
A000 Diamond Stealth64 Video 2xx1
G 40x25 8x8
320x200
16M
.
A000 Cirrus CL-GD 5422/5426
G 160x64 8x16 1280x1024
.
.
A000 Diamond Stealth64 Video 2xx1
extended mode set (see AX=0070h) . Everex Micro Enhancer EGA
T 40x25 8x8
. 16
8
B800 Quadram (CGA double scan)
T 40x25 8x8
(CGA dblscan)
. . Genoa SuperEGA BIOS 3.0+
G
.
.
360x480 256
. . Cirrus 510/520/5320 chips
G 90x28 8x14 720x392
16
1
A000 Ahead B
G 80x30 8x16 640x480
.
.
A000 Diamond Stealth64 Video 2xx1
G 100x38 8x16 800x600
16
.
A000 C&T chipset, Cardinal
G
.
.
1024x480 256
.
A000 Trident 8900C BIOS C3.0
T 80x25 8x8
. 16
8
B800 Quadram (CGA double scan)
T 80x25 8x8
(CGA dblscan)
. . Genoa SuperEGA BIOS 3.0+
G
.
.
528x400 256
. . Cirrus 510/520 chipset
G 80x30 8x16 640x480
16M
.
A000 Cirrus CL-GD 5422/5426
G 80x30 8x16 640x480
.
.
A000 Diamond Stealth64 Video 2xx1
G 100x35 8x16 800x600
16/64
.
A000 NSI Smart EGA+
G 100x75 8x8
800x600
16
1
A000 Ahead B (same as 6Ah)
G
.
.
960x720
16
. . C&T chipset, Cardinal
D:\D\inter61a\INTERRUP.A
6Bh
6Ch
6Dh
6Eh
6Fh
70h
71h
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
-42-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
72h
73h
74h
75h
76h
77h
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
G
T
T
T
G
G
G
G
G
G
G
G
G
G
G
G
G
T
T
T
T
G
G
G
G
G
G
G
G
G
G
G
T
T
G
G
G
G
G
G
G
.
80x60
80x60
80x60
.
80x25
80x30
.
.
.
.
128x48
128x48
80x60
80x60
80x60
100x37
80x25
80x66
80x66
80x66
.
80x30
100x37
128x48
.
80x30
80x66
80x66
100x37
128x48
128x48
94x29
94x29
100x75
128x48
128x48
160x64
94x29
94x29
100x75
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
.
1024x480 256
.
A000 Trident 8900C BIOS C3.0
8x8
. 16
.
B800 Quadram Ultra VGA
8x8
. 16
.
B800 Genoa 6400
8x8
. 16
.
B800 Genoa SuperEGA BIOS 3.0+
.
528x480 256
. . Cirrus 510/520 chipset
8x19 640x480
16
1
A000 DOS/V w/ any VGA
8x16 640x480
.
.
A000 Diamond Stealth64 Video 2xx1
.
640x480 32K
.
A000 ATI
.
640x480 16M
.
A000 WD90C
.
640x480 16M
.
A000 Diamond Speedstar 24X
.
1024x768
16
. . C&T chipset, Cardinal
8x16 1024x768i 16
.
A000 C&T 82C450 BIOS
8x16 1024x768
16
.
A000 C&T 65530 BIOS (multisync)
8x8
640x480
16
.
A000 Quadram Ultra VGA
8x8
640x480
16
. . Genoa 6400
8x8
640x480
16
. . Genoa SuperEGA BIOS 3.0+
8x16 800x600
.
.
A000 Diamond Stealth64 Video 2xx1
8x19 640x475
16
1
none DOS/V, emulated in VGA graph
8x8
. 16
.
B800 Quadram Ultra VGA
8x8
. 16
.
B800 Genoa 6400
8x8
. 16
.
B800 Genoa SuperEGA BIOS 3.0+
.
640x400
2
.
B800 Toshiba 3100 AT&T mode
8x16 640x480
32K
.
A000 Trident 8900C/BIOS C03
8x16 800x600
.
.
A000 Diamond Stealth64 Video 2xx1
8x16 1024x768
16
1
A000 Ahead A, Ahead B (512K)
.
1024x768
64K
.
A000 Cirrus CL-GD 5422/5426 [1]
8x16 640x480
64K
.
A000 Trident 8900C/BIOS C03
.
640x528
16???
.
A000 Quadram Ultra VGA
.
640x528
16
. . Genoa SuperEGA BIOS 3.0+
8x16 800x600
.
.
A000 Diamond Stealth64 Video 2xx1
8x16 1024x768
4
1
A000 Ahead B
8x16 1024x768
16
.
A000 Chips&Technologies 64310
8x14
. 16
.
B800 Quadram Ultra VGA
8x14
.
.
. . Genoa SuperEGA BIOS 3.0+
8x8
800x600
32K
.
A000 Trident 8900C/BIOS C03
8x16 1024x768
2
1
A000 Ahead B
8x16 1024x768
.
.
A000 Diamond Stealth64 Video 2xx1
8x16 1280x1024 16
.
A000 Chips&Technologies 64310 [1]
.
752x410
16???
.
A000 Quadram Ultra VGA
.
752x410
16
. . Genoa SuperEGA BIOS 3.0+
8x8
800x600
64K
.
A000 Trident 8900C/BIOS C03
-43-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
78h
79h
7Ah
7Bh
7Ch
7Dh
7Eh
7Fh
82h
83h
86h
88h
C0h
C4h
C8h
D0h
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
G 128x48
T 100x37
T 100x75
T 100x75
G
.
G 80x25
G
.
G 80x25
G 80x30
G 80x30
G 100x75
G 100x75
G 100x75
T 114x60
T 114x60
G
.
G
.
G 114x60
G
.
G
.
G 100x37
G 100x37
G 200x75
G 64x32
special
G 80x25
G
.
G 128x48
G 90x43
special
G 128x48
G 90x29
T 80x25
T 80x25
G
.
G 90x43
G
.
G
.
disable
G 80x50
G
.
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
8x16 1024x768
.
.
A000 Diamond Stealth64 Video 2xx1
8x16
. 16
. . Genoa 6400
8x8
. 16
.
B800 Quadram Ultra VGA
8x8
.
.
. . Genoa SuperEGA BIOS 3.0+
.
640x400 256
. . STB VGA/EM-16 Plus
8x16 640x400 256
. . Cardinal, C&T chipset
.
640x400 256
. . Cirrus 5320 chipset
8x16 640x400 256
.
A000 Chips&Technologies 64310
8x16 640x480 256
. . Cardinal, C&T chipset
8x16 640x480 256
.
A000 Chips&Technologies 64310
.
800x600
16???
.
A000 Quadram Ultra VGA
8x8
800x600
16
. . Genoa SuperEGA BIOS 3.0+
8x8
800x600
16
. . Genoa 6400
8x8
. 16
.
B800 Quadram Ultra VGA
8x8
.
.
. . Genoa SuperEGA BIOS 3.0+
.
720x540 256
. . C&T chipset, Cardinal
.
800x600 256
. . C&T chipset, Cardinal
.
912x480
16???
.
A000 Quadram Ultra VGA
.
912x480
16
. . Genoa SuperEGA BIOS 3.0+
.
512x512
16
. . Genoa
8x16 800x600 256
. . C&T 82C453/F65530 chipsets
8x16 800x600 256
.
A000 Chips&Technologies 64310
8x16 1600x1200
. [16] .
A000 Diamond Stealth64 Video 2xx1
8x16 512x512 256
. . Genoa
mode set (see AX=007Eh)
. Paradise VGA, AT&T VDC600
8x16 640x400 256
. . Genoa 6400
.
1024x768 256
. . C&T 82C453 chipset
8x16 1024x768 256
.
A000 Chips&Technologies 64310
.
. mono
.
B000 HERCULES.COM on HGC [14]
function set (see AX=007Fh/BH=00h) Paradise VGA, AT&T VDC600
8x16 1024x768
4
. . Genoa 6400
.
. mono
.
B000 HERCULES.COM on HGC [14]
.
. B&W
. . AT&T VDC overlay mode [6]
.
.
.
. . AT&T VDC overlay mode [6]
.
640x200 B&W
. . AT&T VDC overlay mode [6]
8x8
720x348 mono
.
B000 Hercules + MSHERC.COM
.
640x400 2/prog palette . AT&T VDC overlay mode [6]
.
640x400 2/prog palette . Olivetti Quaderno overlay
output
.
.
. . AT&T VDC overlay mode [6]
8x8
640x400
2
.
B800 Olivetti Quaderno overlay
.
640x400
2
.
B800 DEC VAXmate AT&T mode
-44-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Notes:
[1] interlaced only
[2] for ATI EGA Wonder, mode 08h is only valid if SMS.COM is loaded resident.
SMS maps mode 08h to mode 27h if the byte at location 0040:0063 is 0B4h,
otherwise to mode 23h, thus selecting the appropriate (monochrome or
color) 132x25 character mode.
for ATI VGA Wonder, mode 08h is the same, and only valid if VCONFIG loaded
resident
[3] early XGA boards support 132-column text but do not have this BIOS mode
[4] DESQview intercepts calls to change into these two modes (21h is page 0,
22h is page 1) even if there is no Hercules graphics board installed
[5] ATI BIOS v4-1.00 has a text-scrolling bug in this mode
[6] for AT&T VDC overlay modes, BL contains the DEB mode, which may be 06h,
40h, or 44h
[7] BIOS text support is broken in this undocumented mode; scrolling moves
only about 1/3 of the screen (and does even that portion incorrectly),
while screen clears only clear about 3/4.
[8] The Oak OTI-037/067/077 modes are present in the Oak VGA BIOS, which OEMs
may choose to use only partially or not at all; thus, not all Oak boards
support all "Oak" modes listed here
[9] this card uses the full 128K A000h-BFFFh range for the video buffer,
precluding the use of a monochrome adapter in the same system
[10] mode 17h supported by Tseng ET4000 BIOS 8.01X dated 1990/09/14, but not
v8.01X dated 1992/02/28; mode 21h supported by 1992/02/28 version but not
1990/09/14 version
[11] HERKULES simulates a 90x45 text mode in Hercules graphics mode; the
installation check for HERKULES.COM is the signature "Herkules" two
bytes beyond the INT 10 handler
[12] The Realtek RTVGA BIOS v3.C10 crashes when attempting to switch into
modes 21h or 27h; this version of the BIOS also sets the BIOS data area
incorrectly for extended text modes, resulting in scrolling after only
24 lines (the VMODE.EXE utility does set the data area correctly)
[13] The Tandy 1000SL/TL BIOS does not actually support this mode
[14] HERCULES.COM is a graphics-mode BIOS extension for Hercules-compatible
graphics cards by Soft Warehouse, Inc. Its installation check is to
test whether the word preceding the INT 10 handler is 4137h.
[15] The Hercules-graphics video modes for HERCBIOS (shareware by Dave
Tutelman) may be changed by a command-line switch; the 90x43
character-cell mode's number is always one higher than the 90x29 mode
(whose default is mode 08h)
[16] Stealth64 Video 2001-series BIOS v1.03 reports 76 lines for mode 7Ch,
-45-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
resulting in incorrect scrolling for TTY output (scrolling occurs only
after the end of the 76th line, which is not displayed)
[17] For 43-line text on EGA or 43/50-line text on VGA, you must load an 8x8
font using AX=1102h after switching to mode 3; VGA may also require
using INT 10/AH=12h/BL=30h
SeeAlso: #00011,#00083,#00191
Index: video modes
Index: installation check;HERKULES|installation check;HERCULES.COM
--------V-100070----------------------------INT 10 - VIDEO - Everex Micro Enhancer EGA/Viewpoint VGA - EXTENDED MODE SET
AX = 0070h
BL = mode (see #00011)
Desc: specify a proprietary display mode on the Everex Micro Enhancer or
Viewpoint video adapters
SeeAlso: AH=00h,AX=6F05h,AX=7000h/BX=0004h,AH=FFh"GO32"
D:\D\inter61a\INTERRUP.A
(Table 00011)
Values for Everex video mode:
text/ text pixel pixel colors disply scrn monitor
adapter
grph resol box resolution
pages addr
00h = G
.
.
640x480
16
. . multisync EGA,VGA
01h = G
.
.
752x410
16
. . multisync EGA,VGA
02h = G
.
.
800x600
16
. . multisync EGA,VGA
03h = T 80x34
.
.
.
. . multisync EGA,VGA
04h = T 80x60
.
.
.
. . multisync EGA,VGA
05h = T 94x29
.
.
.
. . multisync EGA only
06h = T 94x51
.
.
.
. . multisync EGA only
07h = T 100x43 8x14
. 16
. . .
VGA only
08h = T 100x75 8x8
. 16
. . .
VGA only
09h = T 80x44
.
.
.
. . EGA
EGA only
0Ah = T 132x25
.
.
.
. . EGA
EGA,VGA
0Bh = T 132x44
.
.
.
. . EGA
EGA,VGA
0Ch = T 132x25
.
.
.
. . CGA
EGA only
0Dh = T 80x44
.
.
.
. . mono
EGA only
0Eh = T 132x25
.
.
.
. . mono
0Fh = T 132x44
.
.
.
. . mono
10h = reserved
11h = G
.
.
1280x350
4
. . .
EGA only
12h = G
.
.
1280x600
4
. . .
EGA only
13h = G
.
.
640x350 256
. . .
EGA,EV673
14h = G
.
.
640x400 256
. . .
-46-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
= G
.
.
512x480 256
. . .
= T 80x30 8x16
. 256
. . .
VGA only
= T 100x27 8x16
. 16
. . .
VGA only
= G
.
.
1024x768
16
. . .
Everex 629,678
.
.
.
.
. . .
Everex EV-673
21h = T 160x64 8x16 1280x1024 16
. . .
1MB VGA only
30h = G
.
.
640x480 256
. . .
Everex 629,678
.
.
.
.
. . .
Everex EV-673
31h = G
.
.
800x600 256
. . .
Everex 629,678
.
.
.
.
. . .
Everex EV-673
32h = G 128x48 8x16 1024x768 256
. . .
1MB VGA only
40h = T 132x30 8x16
. 16
. . .
VGA only
50h = T 132x32 8x16
. mono
. . .
VGA only
62h = G 40x25 8x8
320x200 32K
. . .
Vwpt TC (EV629)
70h = G 64x30 8x16 512x480 32K
. . .
Viewpoint TC
71h = G 80x30 8x16 640x480 32K
. . .
Viewpoint TC
76h = G 64x30 8x16 512x480 16M
. . .
Viewpoint TC
77h = G 80x30 8x16 640x480 16M
. . .
Viewpoint TC
SeeAlso: #00010,#00191
Index: video modes;Everex
--------V-10007E----------------------------INT 10 - VIDEO - Paradise VGA, AT&T VDC600 - SET SPECIAL MODE
AX = 007Eh
BX = horizontal dimension of the mode desired
CX = vertical dimension of the mode desired
(both BX/CX in pixels for graphics modes, rows for alpha modes)
DX = number of colors of the mode desired (0000h for monochrome modes)
Return: BH = 7Eh if successful (Paradise VGA)
AL = 7Eh if successful (AT&T VDC600)
Desc: specify a display mode by resolution rather than mode number
SeeAlso: AH=00h,AX=0070h,AX=007Fh/BH=00h,AX=6F05h,AH=FFh"GO32"
Index: video modes;Paradise|video modes;AT&T
--------V-10007FBH00------------------------INT 10 - VIDEO - Paradise VGA, AT&T VDC600 - SET VGA OPERATION
AX = 007Fh
BH = 00h
Return: AL = 7Fh if successful (AT&T VDC600)
BH = status (Paradise/Dell)
00h invalid function
7Fh successful
SeeAlso: AX=007Fh/BH=01h,AX=007Fh/BH=02h
D:\D\inter61a\INTERRUP.A
15h
16h
18h
20h
-47-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
--------V-10007FBH01------------------------INT 10 - VIDEO - Paradise VGA, AT&T VDC600 - SET NON-VGA OPERATION
AX = 007Fh
BH = 01h
Return: AL = 7Fh if successful (AT&T VDC600)
BH = status (Paradise/Dell)
00h invalid function
7Fh successful
Note: color modes (0,1,2,3,4,5,6) will set non-VGA CGA operation, monochrome
mode 7 will set non-VGA MDA/Hercules operation
SeeAlso: AX=007Fh/BH=00h,AX=007Fh/BH=02h
--------V-10007FBH02------------------------INT 10 - VIDEO - Paradise VGA, AT&T VDC600 - QUERY MODE STATUS
AX = 007Fh
BH = 02h
Return: AL = 7Fh if successful (AT&T VDC600)
BH = status (Paradise/Dell)
00h invalid function
7Fh successful
---if successful--BL = 00h if operating in VGA mode, 01h if non-VGA mode
CH = total video RAM size in 64k byte units
CL = video RAM used by the current mode
Note: under Novell DOS 7 TaskMgr Multitasker, this call always returns 0K
video memory in CX
SeeAlso: AX=007Fh/BH=00h,AX=007Fh/BH=01h
--------V-10007FBH03------------------------INT 10 - VIDEO - Paradise VGA, AT&T VDC600 - LOCK CURRENT MODE
AX = 007Fh
BH = 03h
Return: AL = 7Fh if successful (AT&T VDC600)
BH = status (Paradise/Dell)
00h invalid function
7Fh successful
Desc: allows current mode (VGA or non-VGA) to survive re-boot
SeeAlso: AX=007Eh,AX=007Fh/BH=04h,AX=007Fh/BH=06h,AH=FFh"Oak"
--------V-10007FBH04------------------------INT 10 - VIDEO - Paradise VGA, AT&T VDC600 - ENTER MDA EMULATION MODE
AX = 007Fh
BH = 04h
Return: AL = 7Fh if successful (AT&T VDC600)
-48-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
BH = status (Paradise/Dell)
00h invalid function
7Fh successful
SeeAlso: AX=007Eh,AX=007Fh/BH=03h,AX=007Fh/BH=05h,AH=FFh"Oak"
--------V-10007FBH05------------------------INT 10 - VIDEO - Paradise VGA, AT&T VDC600 - ENTER CGA EMULATION MODE
AX = 007Fh
BH = 05h
Return: AL = 7Fh if successful (AT&T VDC600)
BH = status (Paradise/Dell)
00h invalid function
7Fh successful
SeeAlso: AX=007Eh,AX=007Fh/BH=03h,AX=007Fh/BH=04h,AH=FFh"Oak"
--------V-10007FBH06------------------------INT 10 - VIDEO - Paradise VGA, AT&T VDC600 - ENTER MONOCHROME VGA MODE
AX = 007Fh
BH = 06h
Return: AL = 7Fh if successful (AT&T VDC600)
BH = status (Paradise/Dell)
00h invalid function
7Fh successful
Note: this function also switches to video mode 7
SeeAlso: AX=007Eh,AX=007Fh/BH=03h,AX=007Fh/BH=07h,AH=FFh"Oak"
--------V-10007FBH07------------------------INT 10 - VIDEO - Paradise VGA, AT&T VDC600 - ENTER COLOR VGA MODE
AX = 007Fh
BH = 07h
Return: AL = 7Fh if successful (AT&T VDC600)
BH = status (Paradise/Dell)
00h invalid function
7Fh successful
Note: this function also switches to video mode 3
SeeAlso: AX=007Eh,AX=007Fh/BH=03h,AX=007Fh/BH=06h,AH=FFh"Oak"
--------V-10007F----------------------------INT 10 - VIDEO - Paradise VGA, AT&T VDC600 - EXTENDED DATA REGISTER ACCESS
AX = 007Fh
BH = function
0Ah,0Bh,0Ch,0Dh,0Eh,0Fh WRITE PARADISE REGISTERS 0,1,2,3,4,5
(port 03CEh indices 0Ah,0Bh,0Ch,0Dh,0Eh,0Fh)
BL = value to set in the paradise register
1Ah,1Bh,1Ch,1Dh,1Eh,1Fh READ PARADISE REGISTERS 0,1,2,3,4,5
D:\D\inter61a\INTERRUP.A
-49-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(port 03CEh indices 0Ah,0Bh,0Ch,0Dh,0Eh,0Fh)
Return: BL = value of the paradise register
BH = 7Fh if successful
29h-2Fh ??? (Paradise VGA for Dell, 1991/07/24)
Return: AL = 7Fh if successful (AT&T VDC600)
BH = status (Paradise/Dell)
00h invalid function
7Fh successful
SeeAlso: AX=007Eh,AX=007Fh/BH=03h,AX=007Fh/BH=05h,AH=FFh"Oak"
--------V-10007FBH60------------------------INT 10 - Paradise VGA - ???
AX = 007Fh
BH = 60h
BL = ??? (00h-13h)
???
Return: BH = status (00h failed or not supported, 7Fh successful)
???
Note: this function is supported by the 1993/5/14 ROM for the Dell 486D
SeeAlso: AX=007Fh/BH=61h
--------V-10007FBH61------------------------INT 10 - Paradise VGA - ???
AX = 007Fh
BH = 61h
ES:DI -> buffer for list of ??? (see #00012)
Return: BH = status (00h failed or not supported, 7Fh successful)
???
Note: this function is supported by the 1993/5/14 ROM for the Dell 486D
SeeAlso: AX=007Fh/BH=60h
D:\D\inter61a\INTERRUP.A
Format of Paradise VGA list entry:
Offset Size Description (Table 00012)
00h BYTE ??? or 00h if end of list
01h BYTE ???
02h WORD ???
04h WORD ???
06h WORD ???
--------V-10007FBXA500----------------------INT 10 - Paradise VGA - ???
AX = 007Fh
BX = A500h
???
-50-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Return: BH = status (00h failed or not supported, 7Fh successful)
???
Note: this function is supported by the 1993/5/14 ROM for the Dell 486D
SeeAlso: AX=007Fh/BH=A6h
--------V-10007FBHA5------------------------INT 10 - Paradise VGA - ???
AX = 007Fh
BH = A5h
BL = ???
bits 3-0: ??? (0-4)
bits 5,4: ???
???
Return: BH = status (00h failed or not supported, 7Fh successful)
???
Note: this function is supported by the 1993/5/14 ROM for the Dell 486D
--------V-10007FBHA6------------------------INT 10 - Paradise VGA - ???
AX = 007Fh
BH = A6h
???
Return: BH = status (00h failed or not supported, 7Fh successful)
???
Note: this function is supported by the 1993/5/14 ROM for the Dell 486D
SeeAlso: AX=007Fh/BH=A5h
--------V-1001------------------------------INT 10 - VIDEO - SET TEXT-MODE CURSOR SHAPE
AH = 01h
CH = cursor start and options (see #00013)
CL = bottom scan line containing cursor (bits 0-4)
Return: nothing
Desc: specify the starting and ending scan lines to be occupied by the
hardware cursor in text modes
Notes: buggy on EGA systems--BIOS remaps cursor shape in 43 line modes, but
returns unmapped cursor shape
UltraVision scales size to the current font height by assuming 14-line
monochrome and 8-line color fonts; this call is not valid if cursor
emulation has been disabled
applications which wish to change the cursor by programming the
hardware directly on EGA or above should call INT 10/AX=1130h or
read 0040h:0085h first to determine the current font height
on some adapters, setting the end line greater than the number of lines
-51-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
in the font will result in the cursor extending to the top of the
next character cell on the right
BUG: AMI 386 BIOS and AST Premier 386 BIOS will lock up the system if AL
is not equal to the current video mode
SeeAlso: AH=03h,AX=CD05h,AH=12h/BL=34h,#03885
D:\D\inter61a\INTERRUP.A
Bitfields for cursor start and options:
Bit(s) Description (Table 00013)
7 should be zero
6,5 cursor blink
(00=normal, 01=invisible, 10=erratic, 11=slow)
(00=normal, other=invisible on EGA/VGA)
4-0 topmost scan line containing cursor
--------V-1002------------------------------INT 10 - VIDEO - SET CURSOR POSITION
AH = 02h
BH = page number
0-3 in modes 2&3
0-7 in modes 0&1
0 in graphics modes
DH = row (00h is top)
DL = column (00h is left)
Return: nothing
SeeAlso: AH=03h,AH=05h,INT 60/DI=030Bh,MEM 0040h:0050h
--------V-1003------------------------------INT 10 - VIDEO - GET CURSOR POSITION AND SIZE
AH = 03h
BH = page number
0-3 in modes 2&3
0-7 in modes 0&1
0 in graphics modes
Return: AX = 0000h (Phoenix BIOS)
CH = start scan line
CL = end scan line
DH = row (00h is top)
DL = column (00h is left)
Notes: a separate cursor is maintained for each of up to 8 display pages
many ROM BIOSes incorrectly return the default size for a color display
(start 06h, end 07h) when a monochrome display is attached
With PhysTechSoft's PTS ROM-DOS the BH value is ignored on entry.
SeeAlso: AH=01h,AH=02h,AH=12h/BL=34h,MEM 0040h:0050h,MEM 0040h:0060h
-52-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
--------V-1004------------------------------INT 10 - VIDEO - READ LIGHT PEN POSITION (except VGA)
AH = 04h
Return: AH = light pen trigger flag
00h not down/triggered
01h down/triggered
DH,DL = row,column of character light pen is on
CH = pixel row (graphics modes 04h-06h)
CX = pixel row (graphics modes with >200 rows)
BX = pixel column
Desc: determine the current position and status of the light pen (if
present)
Notes: on a CGA, returned column numbers are always multiples of 2 (320column modes) or 4 (640-column modes)
returned row numbers are only accurate to two lines
--------V-1004-----------------------------------INT 10 - HUNTER 16 - GET CURSOR ADDRESS
AH = 04h
BH = page
Return: DH = row (0..24)
DL = column (0..79)
CH = cursor pixel Y-address (0..199)
CL = cursor pixel X-address (0..639)
Notes: the Husky Hunter 16 is an 8088-based ruggedized laptop. Other family
members are the Husky Hunter, Husky Hunter 16/80, and Husky Hawk.
pixel coordinates are for the lower left corner of the character cell
containing the cursor
SeeAlso: AH=60h"HUNTER"
--------V-1005------------------------------INT 10 - VIDEO - SELECT ACTIVE DISPLAY PAGE
AH = 05h
AL = new page number (00h to number of pages - 1) (see #00010)
Return: nothing
Desc: specify which of possibly multiple display pages will be visible
Note: to determine whether the requested page actually exists, use AH=0Fh
to query the current page after making this call
SeeAlso: AH=0Fh,AH=43h,AH=45h,MEM 0040h:0062h,MEM 0040h:004Eh
--------V-100500----------------------------INT 10 - VIDEO - Corona/Cordata BIOS v4.10+ - SET GRAPHICS BITMAP BUFFER
AX = 0500h
BX = segment of buffer
-53-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Return: nothing
Desc: set the address of graphics bitmap buffer for video modes 60h and 61h
SeeAlso: AX=050Fh"Corona"
--------V-10050F----------------------------INT 10 - VIDEO - Corona/Cordata BIOS v4.10+ - GET GRAPHICS BITMAP BUFFER
AX = 050Fh
Return: DX = segment of graphics bitmap buffer
Desc: get the address of graphics bitmap buffer for video modes 60h and 61h
SeeAlso: AX=0500h"Corona"
--------V-100580----------------------------INT 10 - VIDEO - PCjr, Tandy 1000 - GET CRT/CPU PAGE REGISTERS
AX = 0580h
Return: BH = CRT page register
BL = CPU page register
Notes: the CPU page determines which 16K block of the first 128K of physical
memory will be mapped at B800h by the hardware
the CRT page determines the start address of the memory used by the
video controller
SeeAlso: AH=05h"SET CRT/CPU"
--------V-1005------------------------------INT 10 - VIDEO - PCjr, Tandy 1000 - SET CRT/CPU PAGE REGISTERS
AH = 05h
AL = subfunction
81h set CPU page register
BL = CPU page
82h set CRT page register
BH = CRT page
83h set both CPU and CRT page registers
BL = CPU page
BH = CRT page
Return: nothing
Notes: the CPU page determines which 16K block of the first 128K of physical
memory will be mapped at B800h by the hardware
the CRT page determines the start address of the memory used by the
video controller
SeeAlso: AX=0580h
--------V-1006------------------------------INT 10 - VIDEO - SCROLL UP WINDOW
AH = 06h
AL = number of lines by which to scroll up (00h = clear entire window)
BH = attribute used to write blank lines at bottom of window
-54-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
CH,CL = row,column of window's upper left corner
DH,DL = row,column of window's lower right corner
Return: nothing
Note: affects only the currently active page (see AH=05h)
BUGS: some implementations (including the original IBM PC) have a bug which
destroys BP
the Trident TVGA8900CL (BIOS dated 1992/9/8) clears DS to 0000h when
scrolling in an SVGA mode (800x600 or higher)
SeeAlso: AH=07h,AH=12h"Tandy 2000",AH=72h,AH=73h,AX=7F07h,INT 50/AX=0014h
--------V-1007------------------------------INT 10 - VIDEO - SCROLL DOWN WINDOW
AH = 07h
AL = number of lines by which to scroll down (00h=clear entire window)
BH = attribute used to write blank lines at top of window
CH,CL = row,column of window's upper left corner
DH,DL = row,column of window's lower right corner
Return: nothing
Note: affects only the currently active page (see AH=05h)
BUGS: some implementations (including the original IBM PC) have a bug which
destroys BP
the Trident TVGA8900CL (BIOS dated 1992/9/8) clears DS to 0000h when
scrolling in an SVGA mode (800x600 or higher)
SeeAlso: AH=06h,AH=12h"Tandy 2000",AH=72h,AH=73h,INT 50/AX=0014h
--------V-1008------------------------------INT 10 - VIDEO - READ CHARACTER AND ATTRIBUTE AT CURSOR POSITION
AH = 08h
BH = page number (00h to number of pages - 1) (see #00010)
Return: AH = character's attribute (text mode only) (see #00014)
AH = character's color (Tandy 2000 graphics mode only)
AL = character
Notes: for monochrome displays, a foreground of 1 with background 0 is
underlined
the blink bit may be reprogrammed to enable intense background colors
using AX=1003h or by programming the CRT controller
the foreground intensity bit (3) can be programmed to switch between
character sets A and B on EGA and VGA cards, thus enabling 512
simultaneous characters on screen. In this case the bit's usual
function (intensity) is regularly turned off.
in graphics modes, only characters drawn with white foreground pixels
are matched by the pattern-comparison routine
on the Tandy 2000, BH=FFh specifies that the current page should be
D:\D\inter61a\INTERRUP.A
-55-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
used
because of the IBM BIOS specifications, there may exist some clone
BIOSes which do not preserve SI or DI; the Novell DOS kernel
preserves SI, DI, and BP before many INT 10h calls to avoid problems
due to those registers not being preserved by the BIOS.
BUG: some IBM PC ROM BIOSes destroy BP when in graphics modes
SeeAlso: AH=09h,AX=1003h,AX=1103h,AH=12h/BL=37h,AX=5001h
D:\D\inter61a\INTERRUP.A
Bitfields for character's display attribute:
Bit(s) Description (Table 00014)
7 foreground blink or (alternate) background bright (see also AX=1003h)
6-4 background color (see #00015)
3 foreground bright or (alternate) alternate character set (see AX=1103h)
2-0 foreground color (see #00015)
SeeAlso: #00026
(Table 00015)
Values for character color:
Normal
Bright
000b black
dark gray
001b blue
light blue
010b green
light green
011b cyan
light cyan
100b red
light red
101b magenta
light magenta
110b brown
yellow
111b light gray white
--------V-1009------------------------------INT 10 - VIDEO - WRITE CHARACTER AND ATTRIBUTE AT CURSOR POSITION
AH = 09h
AL = character to display
BH = page number (00h to number of pages - 1) (see #00010)
background color in 256-color graphics modes (ET4000)
BL = attribute (text mode) or color (graphics mode)
if bit 7 set in <256-color graphics mode, character is XOR'ed
onto screen
CX = number of times to write character
Return: nothing
Notes: all characters are displayed, including CR, LF, and BS
replication count in CX may produce an unpredictable result in graphics
modes if it is greater than the number of positions remaining in the
-56-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
current row
With PhysTechSoft's PTS ROM-DOS the BH, BL, and CX values are ignored
on entry.
SeeAlso: AH=08h,AH=0Ah,AH=4Bh"GRAFIX",INT 17/AH=60h,INT 1F"SYSTEM DATA"
SeeAlso: INT 43"VIDEO DATA",INT 44"VIDEO DATA"
--------V-100A------------------------------INT 10 - VIDEO - WRITE CHARACTER ONLY AT CURSOR POSITION
AH = 0Ah
AL = character to display
BH = page number (00h to number of pages - 1) (see #00010)
background color in 256-color graphics modes (ET4000)
BL = attribute (PCjr, Tandy 1000 only) or color (graphics mode)
if bit 7 set in <256-color graphics mode, character is XOR'ed
onto screen
CX = number of times to write character
Return: nothing
Notes: all characters are displayed, including CR, LF, and BS
replication count in CX may produce an unpredictable result in graphics
modes if it is greater than the number of positions remaining in the
current row
With PhysTechSoft's PTS ROM-DOS the BH and CX values are ignored
on entry.
SeeAlso: AH=08h,AH=09h,AH=11h"Tandy 2000",AH=4Bh,INT 17/AH=60h
SeeAlso: INT 1F"SYSTEM DATA",INT 43"VIDEO DATA",INT 44"VIDEO DATA"
--------V-100B--BH00------------------------INT 10 - VIDEO - SET BACKGROUND/BORDER COLOR
AH = 0Bh
BH = 00h
BL = background/border color (border only in text modes)
Return: nothing
SeeAlso: AH=0Bh/BH=01h
--------V-100B--BH01------------------------INT 10 - VIDEO - SET PALETTE
AH = 0Bh
BH = 01h
BL = palette ID
00h background, green, red, and brown/yellow
01h background, cyan, magenta, and white
Return: nothing
Note: this call was only valid in 320x200 graphics on the CGA, but newer
cards support it in many or all graphics modes
D:\D\inter61a\INTERRUP.A
-57-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
SeeAlso: AH=0Bh/BH=00h,MEM 0040h:0066h
--------V-100B--BH02------------------------INT 10 - Tandy 2000 - VIDEO - SET PALETTE ENTRY
AH = 0Bh
BH = 02h
BL = palette entry number
AL = new color value for palette entry
Return: nothing
Note: this interrupt is identical to INT 52 for Tandy 2000
SeeAlso: INT 10/AH=00h,INT 10/AH=0Bh/BH=01h,INT 52"Tandy 2000"
--------V-100C------------------------------INT 10 - VIDEO - WRITE GRAPHICS PIXEL
AH = 0Ch
BH = page number
AL = pixel color
if bit 7 set, value is XOR'ed onto screen except in 256-color modes
CX = column
DX = row
Return: nothing
Desc: set a single pixel on the display in graphics modes
Notes: valid only in graphics modes
BH is ignored if the current video mode supports only one page
SeeAlso: AH=0Dh,AH=46h
--------V-100D------------------------------INT 10 - VIDEO - READ GRAPHICS PIXEL
AH = 0Dh
BH = page number
CX = column
DX = row
Return: AL = pixel color
Desc: determine the current color of the specified pixel in grahics modes
Notes: valid only in graphics modes
BH is ignored if the current video mode supports only one page
SeeAlso: AH=0Ch,AH=47h
--------V-100E------------------------------INT 10 - VIDEO - TELETYPE OUTPUT
AH = 0Eh
AL = character to write
BH = page number
BL = foreground color (graphics modes only)
Return: nothing
-58-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Desc: display a character on the screen, advancing the cursor and scrolling
the screen as necessary
Notes: characters 07h (BEL), 08h (BS), 0Ah (LF), and 0Dh (CR) are interpreted
and do the expected things
IBM PC ROMs dated 1981/4/24 and 1981/10/19 require that BH be the same
as the current active page
BUG: if the write causes the screen to scroll, BP is destroyed by BIOSes
for which AH=06h destroys BP
SeeAlso: AH=02h,AH=06h,AH=0Ah
--------b-100E--CXABCD----------------------INT 10 - V20-XT-BIOS - TELETYPE OUTPUT WITH ATTRIBUTE
AH = 0Eh
CX = ABCDh
BP = ABCDh
AL = character to write
BH = page number
BL = foreground color (text modes as well as graphics modes)
Return: nothing
Program: V20-XT-BIOS is a ROM BIOS replacement with extensions by Peter
Koehlmann / c't magazine
Desc: display a character on the screen, advancing the cursor and scrolling
the screen as necessary
Notes: characters 07h (BEL), 08h (BS), 0Ah (LF), and 0Dh (CR) are interpreted
and do the expected things
SeeAlso: INT 15/AH=84h"V20-XT-BIOS"
--------V-100F------------------------------INT 10 - VIDEO - GET CURRENT VIDEO MODE
AH = 0Fh
Return: AH = number of character columns
AL = display mode (see #00010 at AH=00h)
BH = active page (see AH=05h)
Notes: if mode was set with bit 7 set ("no blanking"), the returned mode will
also have bit 7 set
EGA, VGA, and UltraVision return either AL=03h (color) or AL=07h
(monochrome) in all extended-row text modes
HP 200LX returns AL=07h (monochrome) if mode was set to AL=21h
and always 80 resp. 40 columns in all text modes regardless of
current zoom setting (see AH=D0h)
when using a Hercules Graphics Card, additional checks are necessary:
mode 05h: if WORD 0040h:0063h is 03B4h, may be in graphics page 1
(as set by DOSSHELL and other Microsoft software)
-59-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
mode 06h: if WORD 0040h:0063h is 03B4h, may be in graphics page 0
(as set by DOSSHELL and other Microsoft software)
mode 07h: if BYTE 0040h:0065h bit 1 is set, Hercules card is in
graphics mode, with bit 7 indicating the page (mode set by
Hercules driver for Borland Turbo C)
the Tandy 2000 BIOS is only documented as returning AL, not AH or BH
SeeAlso: AH=00h,AH=05h,AX=10F2h,AX=1130h,AX=CD04h,MEM 0040h:004Ah
--------V-100F56BX4756----------------------INT 10 - VUIMAGE DISPLAY DRIVER (v2.20 and below)
AX = 0F56h
BX = 4756h
CX = 4944h
DL = function
01h installation check
Return: AX = 5649h
BX = 4443h
CX = 5647h
DH = 01h
02h get first video mode's parameters
Return: AX = BIOS mode number
BX = width in pixels
CX = height in pixels
DX = number of colors
03h get next video mode's parameters
Return: as for DL=02h
04h display line???
ES:DI -> record (see #00016)
???
Return: ???
Program: VUIMAGE is a shareware GIF/TIFF image viewer by Offe Enterprises
Note: the use of TSR display drivers was discontinued after v2.20
Index: installation check;VUIMAGE display driver
D:\D\inter61a\INTERRUP.A
Format of record for VUIMAGE Function 04h:
Offset Size Description (Table 00016)
00h WORD row number
02h WORD starting column???
04h WORD ending column???
???
--------V-100F--SIF123----------------------INT 10 - FRIEZE v7.41+ - INSTALLATION CHECK
-60-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
AH = 0Fh
SI = F123h
DI = 321Fh
Return: AH = number of character columns
AL = display mode (see #00010 at AH=00h)
BH = active page (see AH=05h)
SI = DI = F345h if installed
Notes: if mode was set with bit 7 set ("no blanking"), the returned mode will
also have bit 7 set
EGA, VGA, and UltraVision return either AL=03h (color) or AL=07h
(monochrome) in all extended-row text modes
SeeAlso: AH=0Fh"VIDEO",AH=4Bh"FRIEZE"
--------V-1010------------------------------INT 10 - BIOS Window Extension v1.1 - SET WINDOW COORDINATES
AH = 10h
CH,CL = row,column of upper left corner of window
DH,DL = row,column of lower right corner of window
Return: AL = status
00h successful
01h failed
AH destroyed
Program: BWE is a TSR by John J. Seal published in May 1986 Dr. Dobb's Journal
Note: when a window has been set, all output via AH=0Eh is restricted to
the specified window
SeeAlso: AH=11h"Window",AH=12h"Window"
--------V-1010------------------------------INT 10 - VIDEO - Eagle PC2 BIOS Rev. C - SET SCROLL SPEED
AH = 10h
AL = speed
00h fast
01h slow (scrolling only moves characters during vertical retrace)
Return: AH = previous speed
--------V-1010------------------------------INT 10 - Tandy 2000 - VIDEO - GET/SET CHARACTER FONTS
AH = 10h
AL = control value
bit 0: set character set instead of reading it
bit 1: high 128 characters instead of low 128 characters
ES:BX -> new character set if AL bit 0 set
Return: ES:BX -> current character set if AL bit 0 clear on entry
Notes: this interrupt is identical to INT 52 on Tandy 2000
D:\D\inter61a\INTERRUP.A
-61-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
the character set consists of 16 bytes for each of the 128 characters,
where each of the 16 bytes describes the pixels in one scan line,
most significant bit leftmost
SeeAlso: AH=00h,AH=0Bh/BH=02h,AH=11h"Tandy 2000",AH=12h"Tandy 2000"
SeeAlso: INT 52"Tandy 2000"
--------V-101000----------------------------INT 10 - VIDEO - SET SINGLE PALETTE REGISTER (PCjr,Tandy,EGA,MCGA,VGA)
AX = 1000h
BL = palette register number (00h-0Fh)
= attribute register number (undocumented) (see #00017)
BH = color or attribute register value
Return: nothing
Notes: on MCGA, only BX = 0712h is supported
under UltraVision, the palette locking status (see AX=CD01h)
determines the outcome
SeeAlso: AX=1002h,AX=1007h,AX=CD01h
D:\D\inter61a\INTERRUP.A
(Table 00017)
Values for attribute register number:
10h attribute mode control register (should let BIOS control this)
11h overscan color register (see also AX=1001h)
12h color plane enable register (bits 3-0 enable corresponding
text attribute bit)
13h horizontal PEL panning register
14h color select register
--------V-101001----------------------------INT 10 - VIDEO - SET BORDER (OVERSCAN) COLOR (PCjr,Tandy,EGA,VGA)
AX = 1001h
BH = border color (00h-3Fh)
Return: nothing
BUG: the original IBM VGA BIOS incorrectly updates the parameter save area
and places the border color at offset 11h of the palette table
rather than offset 10h
Note: under UltraVision, the palette locking status (see AX=CD01h)
determines the outcome
SeeAlso: AX=1002h,AX=1008h,AX=CD01h
--------V-101002----------------------------INT 10 - VIDEO - SET ALL PALETTE REGISTERS (PCjr,Tandy,EGA,VGA)
AX = 1002h
ES:DX -> palette register list (see #00018)
BH = 00h to avoid problems on some adapters
-62-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Return: nothing
Note: under UltraVision, the palette locking status (see AX=CD01h)
determines the outcome
SeeAlso: AX=1000h,AX=1001h,AX=1009h,AX=CD01h
Format of palette register list:
Offset Size Description (Table 00018)
00h 16 BYTEs colors for palette registers 00h through 0Fh
10h BYTE border color
SeeAlso: #00461
--------V-101003----------------------------INT 10 - VIDEO - TOGGLE INTENSITY/BLINKING BIT (Jr, PS, TANDY 1000, EGA, VGA)
AX = 1003h
BL = new state
00h background intensity enabled
01h blink enabled
BH = 00h to avoid problems on some adapters
Return: nothing
Notes: although there is no function to get the current status on adapters
prior to the VGA, bit 5 of 0040h:0065h indicates the state; on the
VGA, use AH=1Bh and check offset 2Dh of the returned data (see #00040)
when configured for a monochrome display, the Boca Research Multi-EGA
with ROM v M1.1 Type D has its screen disrupted if BH is not clear
this call is reported to be "Get Cursor Position" on the Tandy
1000SL/TL
SeeAlso: AH=08h,AH=1Bh
--------V-101007----------------------------INT 10 - VIDEO - GET INDIVIDUAL PALETTE REGISTER (VGA,UltraVision v2+)
AX = 1007h
BL = palette or attribute (undoc) register number (see #00017)
Return: BH = palette or attribute register value
Note: UltraVision v2+ supports this function even on color EGA systems in
video modes 00h-03h, 10h, and 12h; direct programming of the palette
registers will cause incorrect results because the EGA registers are
write-only. To guard against older versions or unsupported video
modes, programs which expect to use this function on EGA systems
should set BH to FFh on entry.
SeeAlso: AX=1000h,AX=1009h
--------V-101008----------------------------INT 10 - VIDEO - READ OVERSCAN (BORDER COLOR) REGISTER (VGA,UltraVision v2+)
AX = 1008h
-63-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Return: BH = border color (00h-3Fh)
Note: (see AX=1007h)
SeeAlso: AX=1001h
--------V-101009----------------------------INT 10 - VIDEO - READ ALL PALETTE REGISTERS AND OVERSCAN REGISTER (VGA)
AX = 1009h
ES:DX -> 17-byte buffer for palette register list (see #00018)
Return: nothing
Note: UltraVision v2+ supports this function even on color EGA systems in
video modes 00h-03h, 10h, and 12h; direct programming of the palette
registers will cause incorrect results because the EGA registers are
write-only. To guard against older versions or unsupported video
modes, programs which expect to use this function on EGA systems
should set the ES:DX buffer to FFh before calling.
SeeAlso: AX=1002h,AX=1007h,AX=CD02h
--------V-101010----------------------------INT 10 - VIDEO - SET INDIVIDUAL DAC REGISTER (VGA/MCGA)
AX = 1010h
BX = register number
CH = new value for green (0-63)
CL = new value for blue (0-63)
DH = new value for red (0-63)
Return: nothing
SeeAlso: AX=1012h,AX=1015h
--------V-101012----------------------------INT 10 - VIDEO - SET BLOCK OF DAC REGISTERS (VGA/MCGA)
AX = 1012h
BX = starting color register
CX = number of registers to set
ES:DX -> table of 3*CX bytes where each 3 byte group represents one
byte each of red, green and blue (0-63)
Return: nothing
SeeAlso: AX=1010h,AX=1017h,INT 62/AX=00A5h
--------V-101013----------------------------INT 10 - VIDEO - SELECT VIDEO DAC COLOR PAGE (VGA)
AX = 1013h
BL = subfunction
00h select paging mode
BH = 00h select 4 blocks of 64
BH = 01h select 16 blocks of 16
01h select page
-64-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
BH = page number (00h to 03h) or (00h to 0Fh)
Return: nothing
Note: this function is not valid in mode 13h
SeeAlso: AX=101Ah
--------V-101015----------------------------INT 10 - VIDEO - READ INDIVIDUAL DAC REGISTER (VGA/MCGA)
AX = 1015h
BL = palette register number
Return: DH = red value
CH = green value
CL = blue value
AX destroyed by some BIOSes
(e.g. Tseng ET4000 BIOS v8.00n always returns AX=00C9h)
SeeAlso: AX=1010h,AX=1017h
--------V-101017----------------------------INT 10 - VIDEO - READ BLOCK OF DAC REGISTERS (VGA/MCGA)
AX = 1017h
BX = starting palette register
CX = number of palette registers to read
ES:DX -> buffer (3 * CX bytes in size) (see also AX=1012h)
Return: buffer filled with CX red, green and blue triples
SeeAlso: AX=1012h,AX=1015h,INT 62/AX=00A4h
--------V-101018----------------------------INT 10 U - VIDEO - SET PEL MASK (VGA/MCGA)
AX = 1018h
BL = new PEL value
Return: nothing
SeeAlso: AX=1019h
--------V-101019----------------------------INT 10 U - VIDEO - READ PEL MASK (VGA/MCGA)
AX = 1019h
Return: BL = value read
SeeAlso: AX=1018h
--------V-10101A----------------------------INT 10 - VIDEO - GET VIDEO DAC COLOR-PAGE STATE (VGA)
AX = 101Ah
Return: BL = paging mode
00h four pages of 64
01h sixteen pages of 16
BH = current page
SeeAlso: AX=1013h
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
-65-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
--------V-10101B----------------------------INT 10 - VIDEO - PERFORM GRAY-SCALE SUMMING (VGA/MCGA)
AX = 101Bh
BX = starting palette register
CX = number of registers to convert
Return: nothing
Desc: convert the RGB values of one or more palette registers such that the
resulting values are grays with the same intensities as the original
colors
SeeAlso: AH=12h/BL=33h
--------V-1010E0----------------------------INT 10 - VIDEO - Diamond Speedstar 24 - SET 24-BIT GRAPHICS MODE
AX = 10E0h
BL = video mode (see also #00010 at AH=00h)
2Eh = 640x480
Return: ???
SeeAlso: AH=00h,AX=10F0h
--------V-1010F0----------------------------INT 10 - VIDEO - Tseng ET-4000 BIOS - SET HiColor GRAPHICS MODE
AX = 10F0h
BL = video mode (see also #00010 at AH=00h)
13h = 320x200x32K
2Dh = 640x350x32K
2Eh = 640x480x32K
2Fh = 640x400x32K
30h = 800x600x32K
3Eh = 640x480x16M (Genoa 7900)
FFh Tseng 24-bit color mode
BH = mode
2Dh = 640x480
2Eh = 640x480x16M
2Fh = 640x400
30h = 800x600
38h = 1024x768??? (Tseng ET4000/W32i)
Return: AL = 10h if supported
AH = status
00h if successful
other on error
Desc: switch the display into a graphics mode with 15 or more bits per pixel
Note: the Tseng HiColor BIOS extensions are supported by:
Diamond Computer Systems SpeedStar HiColor VGA
-66-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Everex Systems
HC VGA
Focus Information Systems 2theMax 4000
Cardinal Technologies
VGA732
Orchid ProDesigner IIs Genoa 7900
SeeAlso: AH=00h,AX=10E0h,AX=10F1h,AX=10F2h
Index: video modes;Tseng Hi-Color
--------V-1010F1----------------------------INT 10 - VIDEO - Tseng ET-4000 BIOS - GET DAC TYPE
AX = 10F1h
Return: AL = 10h if supported
BL = type of digital/analog converter (see #00019)
Desc: determine which type of digital-to-analog converter is installed on the
display board
SeeAlso: AX=10F0h,AX=10F2h
D:\D\inter61a\INTERRUP.A
(Table 00019)
Values for type of DAC:
00h normal VGA DAC
01h Sierra SC1148x HiColor DAC
---Diamond SpeedStar 24--02h new Sierra SS24 DAC (24-bit)
---generic Tseng BIOS v8+ --02h Sierra Mark2 (15-bit) or Mark3 (15/16-bit) DAC
03h ATT20c490/1/2 (15/16/24-bit)
04h AcuMos ADAC1 (15/16/24-bit)
05h unknown 15/16/24-bit DAC
06h Cirrus Internal 15/16/24-bit (CL-GD54xx series adapters)
07h Diamond SS2410 (15/24-bit)
08h unknown 15/16/24-bit DAC
09h unknown 15/16/24-bit DAC
else other HiColor DAC
--------V-1010F2----------------------------INT 10 u - VIDEO - Tseng ET-4000 BIOS - CHECK IF HiColor MODE/SET HiColor MODE
AX = 10F2h
BL = function
00h get current HiColor mode
01h set 15-bit HiColor mode
02h set 16-bit HiColor mode
Return: AX = 0010h if supported
BL = video mode type
00h not in HiColor mode
-67-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
01h 15-bit RGB mode
02h 16-bit RGB mode
03h 24-bit RGB mode
Desc: determine whether the display is in a graphics mode with 15 or more
bits per pixel color resolution
Note: set (BL=01h/02h) only works if already in a HiColor mode
SeeAlso: AH=0Fh,AX=10F0h,AX=10F1h
--------V-1011------------------------------INT 10 - BIOS Window Extension v1.1 - GET WINDOW COORDINATES
AH = 11h
Return: CH,CL = row,column of upper left corner
DH,DL = row,column of lower right corner
Desc: determine the portion of the display to which output is restricted
Program: BWE is a TSR by John J. Seal published in May 1986 Dr. Dobb's Journal
SeeAlso: AH=10h"Window",AH=12h"Window"
--------V-1011------------------------------INT 10 - Tandy 2000 - VIDEO - WRITE ATTRIBUTE ONLY
AH = 11h
BL = new character attribute (text modes) or color (graphics)
CX = number of times to write attribute
Return: nothing
Note: this interrupt is identical to INT 52 on Tandy 2000
SeeAlso: AH=0Ah,AH=0Bh/BH=02h,AH=11h"Tandy 2000",AH=12h"Tandy 2000"
SeeAlso: INT 52"Tandy 2000"
--------V-101100----------------------------INT 10 - VIDEO - TEXT-MODE CHARGEN - LOAD USER-SPECIFIED PATTERNS (PS,EGA,VGA)
AX = 1100h
ES:BP -> user table
CX = count of patterns to store
DX = character offset into map 2 block
BL = block to load in map 2
BH = number of bytes per character pattern
Return: nothing
Notes: This function will cause a mode set, completely resetting
the video environment, but without clearing the video buffer
the current block specifiers may be determined with INT 10/AH=1Bh,
looking at offsets 2Bh and 2Ch of the returned data (VGA only)
(see AH=1Bh,#00040)
SeeAlso: AX=1101h,AX=1102h,AX=1103h,AX=1104h,AX=1110h,AH=1Bh,AX=CD10h
SeeAlso: MEM 0040h:0084h
Index: text mode;font|text mode;screen rows
D:\D\inter61a\INTERRUP.A
-68-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
--------V-101101----------------------------INT 10 - VIDEO - TEXT-MODE CHARGEN - LOAD ROM MONOCHROME PATTERNS (PS,EGA,VGA)
AX = 1101h
BL = block to load
Return: nothing
Notes: (see also AX=1100h)
This function will cause a mode set, completely resetting
the video environment, but without clearing the video buffer
the "monochrome" patters are 8x14 pixels in size
SeeAlso: AX=1100h,AX=1102h,AX=1103h,AX=1104h,AX=1111h,AH=1Bh,AX=CD10h
SeeAlso: MEM 0040h:0084h
Index: text mode;font|text mode;screen rows
--------V-101102----------------------------INT 10 - VIDEO - TEXT-MODE CHARGEN - LOAD ROM 8x8 DBL-DOT PATTERNS (PS,EGA,VGA)
AX = 1102h
BL = block to load
Return: nothing
Notes: (see AX=1100h)
SeeAlso: AX=1100h,AX=1101h,AX=1103h,AX=1104h,AX=1112h,AH=1Bh,AX=CD10h
SeeAlso: MEM 0040h:0084h
--------V-101103----------------------------INT 10 - VIDEO - TEXT-MODE CHARGEN - SET BLOCK SPECIFIER (PS,EGA,VGA)
AX = 1103h
BL = block specifier (see #00020)
Return: nothing
Notes: (see also AX=1110h)
This function allows dual character sets to appear on screen
simultaneously
SeeAlso: AX=1100h,AX=1101h,AX=1102h,AX=1104h,AH=1Bh,AX=CD10h
SeeAlso: MEM 0040h:0084h
Index: text mode;font|text mode;screen rows
Bitfields for block specifier:
Bit(s) Description (Table 00020)
---EGA/MCGA--0,1 block selected by characters with attribute bit 3
2,3 block selected by characters with attribute bit 3
---VGA--0,1,4 block selected by characters with attribute bit
2,3,5 block selected by characters with attribute bit
--------V-101104-----------------------------
clear
set
3 clear
3 set
-69-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
INT 10 - VIDEO - TEXT-MODE CHARGEN - LOAD ROM 8x16 CHARACTER SET (VGA)
AX = 1104h
BL = block to load
Return: nothing
Notes: (see AX=1100h)
SeeAlso: AX=1100h,AX=1101h,AX=1102h,AX=1103h,AX=1114h,AH=1Bh,AX=CD10h
SeeAlso: MEM 0040h:0084h
Index: text mode;font|text mode;screen rows
--------V-1011------------------------------INT 10 - VIDEO - Realtek RTVGA - TEXT-MODE CHARACTER GENERATOR FUNCTIONS
AH = 11h
AL = 07h load user-specified patterns and recalculate mode parms
parameters are the same as for AX=1110h
AL = 08h load monochrome patterns (8x14) and recalculate mode parms
parameters are the same as for AX=1111h
AL = 09h load ROM 8 by 8 double-dot patterns and recalculate mode parms
parameters are the same as for AX=1112h
AL = 0Bh load ROM 8x16 character set (VGA) and recalculate mode parms
parameters are the same as for AX=1114h
Note: these functions should only be called under the same conditions as
AL=1xh (see AX=1110h"EGA")
SeeAlso: AX=1100h,AX=1110h"CHARGEN",AX=1110h"Realtek",MEM 0040h:0084h
Index: text mode;font|text mode;screen rows
--------V-10110F----------------------------INT 10 - VIDEO - Realtek RTVGA - SET USER 8x8 GRAPHICS CHARACTERS
AX = 110Fh
ES:BP -> user table for INT 1F
Return: nothing
Note: this function is meant to be called immediately after a mode set;
results are unpredictable at other times
SeeAlso: AX=1110h"Realtek",AX=1111h"Realtek",AX=1112h"Realtek",AX=1120h
--------V-101110----------------------------INT 10 - VIDEO - TEXT-MODE CHARGEN - LOAD USER-SPECIFIED PATTERNS (PS,EGA,VGA)
AX = 1110h
ES:BP -> user table
CX = count of patterns to store
DX = character offset into map 2 block
BL = block to load in map 2
BH = number of bytes per character pattern
Return: nothing
Notes: This function will cause a mode set, completely resetting
-70-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
the video environment, but without clearing the video buffer
This function is designed to be called immediately after a mode set,
it is equivalent to AX=110xh except that:
Page 0 must be active.
Bytes/character is recalculated.
Max character rows is recalculated.
CRT buffer length is recalculated.
CRTC registers are reprogrammed as follows:
R09 = bytes/char-1 ; max scan line (mode 7 only)
R0A = bytes/char-2 ; cursor start
R0B = 0
; cursor end
R12 = ((rows+1)*(bytes/char))-1 ; vertical display end
R14 = bytes/char ; underline loc
(*** BUG: should be 1 less ***)
the current block specifiers may be determined with INT 10/AH=1Bh,
looking at offsets 2Bh and 2Ch of the returned data (VGA only)
(see AH=1Bh,#00040)
SeeAlso: AX=1100h,AX=1111h,AX=1112h,AX=1114h,AH=1Bh,AX=CD10h,MEM 0040h:0084h
Index: text mode;font|text mode;screen rows
--------V-101110----------------------------INT 10 - VIDEO - Realtek RTVGA - SET USER GRAPHICS CHARACTERS
AX = 1110h
ES:BP -> user table
CX = bytes per character
BL = row specifier
00h user set
DL = number of rows
01h 14 rows
02h 25 rows
03h 43 rows
Return: nothing
Note: this function is meant to be called immediately after a mode set;
results are unpredictable at other times
SeeAlso: AX=110Fh"Realtek",AX=1112h"Realtek",AX=1121h
--------V-101111----------------------------INT 10 - VIDEO - TEXT-MODE CHARGEN - LOAD ROM MONOCHROME PATTERNS (PS,EGA,VGA)
AX = 1111h
BL = block to load
Return: nothing
Notes: (see AX=1110h)
the "monochrome" patters are 8x14 pixels in size
D:\D\inter61a\INTERRUP.A
-71-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
SeeAlso: AX=1101h,AX=1110h,AX=1112h,AX=1114h,AH=1Bh,AX=CD10h
--------V-101111----------------------------INT 10 - VIDEO - Realtek RTVGA - SET ROM 8x14 GRAPHICS CHARACTERS
AX = 1111h
BL = row specifier (see AX=1121h)
Return: nothing
Note: this function is meant to be called immediately after a mode set;
results are unpredictable at other times
SeeAlso: AX=110Fh"Realtek",AX=1110h"Realtek",AX=1122h
--------V-101112----------------------------INT 10 - VIDEO - TEXT-MODE CHARGEN - LOAD ROM 8x8 DBL-DOT PATTERNS (PS,EGA,VGA)
AX = 1112h
BL = block to load
Return: nothing
Notes: (see AX=1110h)
SeeAlso: AX=1103h,AX=1110h,AX=1111h,AX=1114h,AH=1Bh,AX=CD10h
--------V-101112----------------------------INT 10 - VIDEO - Realtek RTVGA - SET ROM 8x8 DOUBLE-DOT CHARACTERS
AX = 1112h
BL = row specifier (see AX=1121h)
Return: nothing
Note: this function is meant to be called immediately after a mode set;
results are unpredictable at other times
SeeAlso: AX=110Fh"Realtek",AX=1110h"Realtek",AX=1111h"Realtek",AX=1123h
--------V-101114----------------------------INT 10 - VIDEO - TEXT-MODE CHARGEN - LOAD ROM 8x16 CHARACTER SET (VGA)
AX = 1114h
BL = block to load
Return: nothing
Notes: (see AX=1110h)
SeeAlso: AX=1104h,AX=1110h,AX=1111h,AX=1112h,AH=1Bh,AX=CD10h
--------V-101118----------------------------INT 10 - IBM SurePath BIOS - Officially "Private" Function
AX = 1118h
--------V-101120----------------------------INT 10 - VIDEO - GRAPH-MODE CHARGEN - SET USER 8x8 GRAPHICS CHARS (PS,EGA,VGA)
AX = 1120h
ES:BP -> user table for INT 1F
Return: nothing
Note: this function is meant to be called immediately after a mode set;
results are unpredictable at other times
-72-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
SeeAlso: AX=1121h,AX=1122h,AX=1123h,AX=1124h,AX=1129h,INT 1F"SYSTEM DATA"
SeeAlso: INT 43"VIDEO DATA"
--------V-101121----------------------------INT 10 - VIDEO - GRAPH-MODE CHARGEN - SET USER GRAPHICS CHARACTERS (PS,EGA,VGA)
AX = 1121h
ES:BP -> user table
CX = bytes per character
BL = row specifier
00h user set
DL = number of rows
01h 14 rows
02h 25 rows
03h 43 rows
Return: AL = new number of rows (Diamond Stealth64 Video)
Note: this function is meant to be called immediately after a mode set;
results are unpredictable at other times
SeeAlso: AX=1120h,AX=1122h,AX=1123h,AX=1124h,AX=1129h"Compaq"
SeeAlso: AX=1129h"Diamond",INT 1F"SYSTEM DATA",INT 43"VIDEO DATA"
--------V-101122----------------------------INT 10 - VIDEO - GRAPH-MODE CHARGEN - SET ROM 8x14 GRAPHICS CHARS (PS,EGA,VGA)
AX = 1122h
BL = row specifier (see AX=1121h)
Return: nothing
Notes: this function is meant to be called immediately after a mode set;
results are unpredictable at other times
UltraVision v2+ sets INT 43 to the appropriate font on this call
SeeAlso: AX=1111h,AX=1120h,AX=1121h,AX=1123h,AX=1124h,AX=1129h
SeeAlso: INT 1F"SYSTEM DATA",INT 43"VIDEO DATA"
--------V-101123----------------------------INT 10 - VIDEO - GRAPH-MODE CHARGEN - SET ROM 8x8 DOUBLE-DOT CHARS (PS,EGA,VGA)
AX = 1123h
BL = row specifier (see AX=1121h)
Return: nothing
Notes: this function is meant to be called immediately after a mode set;
results are unpredictable at other times
UltraVision v2+ sets INT 43 to the appropriate font on this call
SeeAlso: AX=1112h,AX=1120h,AX=1121h,AX=1122h,AX=1124h,AX=1129h
SeeAlso: INT 1F"SYSTEM DATA",INT 43"VIDEO DATA"
--------V-101124----------------------------INT 10 - VIDEO - GRAPH-MODE CHARGEN - LOAD 8x16 GRAPHICS CHARS (VGA,MCGA)
AX = 1124h
-73-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
BL = row specifier (see AX=1121h)
Return: nothing
Notes: this function is meant to be called immediately after a mode set;
results are unpredictable at other times
UltraVision v2+ sets INT 43 to the appropriate font on this call
SeeAlso: AX=1120h,AX=1121h,AX=1122h,AX=1123h,AX=1129h
SeeAlso: INT 1F"SYSTEM DATA",INT 43"VIDEO DATA"
--------V-101129----------------------------INT 10 - VIDEO - GRAPH-MODE CHARGEN - LOAD 8x16 GRAPH CHARS (Compaq Systempro)
AX = 1129h
BL = row specifier (see AX=1121h)
Return: nothing
Notes: this function is meant to be called immediately after a mode set;
results are unpredictable at other times
UltraVision v2+ sets INT 43 to the appropriate font on this call
SeeAlso: AX=1120h,AX=1121h,AX=1122h,AX=1123h,AX=1124h,INT 1F"SYSTEM DATA"
SeeAlso: INT 43"VIDEO DATA"
--------V-101129----------------------------INT 10 - VIDEO - GRAPH-MODE CHARGEN - SET USER GRAPHICS CHARACTERS (Diamond)
AX = 1129h
DI:BP -> user table
CX = bytes per character
BL = row specifier
00h user set
DL = number of rows
01h 14 rows
02h 25 rows
03h 43 rows
Return: AL = new number of rows
Notes: this function is meant to be called immediately after a mode set;
results are unpredictable at other times
supported by Diamond Stealth64 Video
SeeAlso: AX=1120h,AX=1122h,AX=1123h,AX=1124h,INT 1F"SYSTEM",INT 43"VIDEO"
--------V-101130----------------------------INT 10 - VIDEO - GET FONT INFORMATION (EGA, MCGA, VGA)
AX = 1130h
BH = pointer specifier
00h INT 1Fh pointer
01h INT 43h pointer
02h ROM 8x14 character font pointer
03h ROM 8x8 double dot font pointer
D:\D\inter61a\INTERRUP.A
-74-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
04h ROM 8x8 double dot font (high 128 characters)
05h ROM alpha alternate (9 by 14) pointer (EGA,VGA)
06h ROM 8x16 font (MCGA, VGA)
07h ROM alternate 9x16 font (VGA only) (see #00021)
11h (UltraVision v2+) 8x20 font (VGA) or 8x19 font (autosync EGA)
12h (UltraVision v2+) 8x10 font (VGA) or 8x11 font (autosync EGA)
Return: ES:BP = specified pointer
CX
= bytes/character of on-screen font (not the requested font!)
DL
= highest character row on screen
Note: for UltraVision v2+, the 9xN alternate fonts follow the corresponding
8xN font at ES:BP+256N
BUG: the IBM EGA and some other EGA cards return in DL the number of rows on
screen rather than the highest row number (which is one less).
SeeAlso: AX=1100h,AX=1103h,AX=1120h,INT 1F"SYSTEM DATA",INT 43"VIDEO DATA"
D:\D\inter61a\INTERRUP.A
Format of alternate font table [array]:
Offset Size Description (Table 00021)
00h BYTE character to be replaced (00h = end of table)
01h N BYTEs graphics data for character, one byte per scan line
--------V-101130BX4D4F----------------------INT 10 - M10_SCR.COM v3.5+ - INSTALLATION CHECK
AX = 1130h
BX = 4D4Fh
Return: CX = 4F4Dh if installed
ES:BP -> M10_SCR INT 10 handler
Program: M10_SCR is a shareware extended text mode and font driver by
I.V. Morozov
SeeAlso: INT 16/AX=4D4Fh
--------V-1012------------------------------INT 10 - BIOS Window Extension v1.1 - GET BLANKING ATTRIBUTE
AH = 12h
Return: BH = attribute to use on blanked lines when scrolling
Program: BWE is a TSR by John J. Seal published in May 1986 Dr. Dobb's Journal
SeeAlso: AH=11h"Window",AH=12h"Window"
--------V-1012------------------------------INT 10 - Tandy 2000 - VIDEO - SCROLL WINDOW
AH = 12h
AL = number of rows or columns to scroll
BH = buffer flag
00h data in user buffer
ES:SI -> buffer containing character/attribute pairs
-75-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
01h no buffer, fill emptied rows/columns with blanks
BL = direction in which to scroll
00h up
01h down
02h left
03h right
CH,CL = row,column of upper left corner of scroll area
DH,DL = row,column of lower right corner
Return: nothing
Notes: this interrupt is identical to INT 52 on Tandy 2000
the user buffer, if supplied, must be organized by row; regardless of
the scroll direction, all character/attribute pairs for the first
row are first, then the pairs for the second row, etc.
SeeAlso: AH=00h,AH=0Bh/BH=02h,AH=11h"Tandy 2000",AH=12h"Tandy 2000"
SeeAlso: INT 52"Tandy"
--------V-1012--BL10------------------------INT 10 - VIDEO - ALTERNATE FUNCTION SELECT (PS, EGA, VGA, MCGA) - GET EGA INFO
AH = 12h
BL = 10h
Return: BH = video state
00h color mode in effect (I/O port 3Dxh)
01h mono mode in effect (I/O port 3Bxh)
BL = installed memory (00h = 64K, 01h = 128K, 02h = 192K, 03h = 256K)
CH = feature connector bits (see #00022)
CL = switch settings (see #00023,#00024)
AH destroyed (at least by Tseng ET4000 BIOS v8.00n)
Note: one possible check for the presence of an EGA or later display card
is to call this function with BH=FFh; if not present, BH will be
unchanged on return
another installation check is used by Athena Digital's HGCIBM, which
sets CX to FFFFh on calling and checks whether it has been changed
on return
Index: installation check;EGA
D:\D\inter61a\INTERRUP.A
Bitfields for feature connector bits:
Bit(s) Description (Table 00022)
0 FEAT 1 line, state 2
1 FEAT 0 line, state 2
2 FEAT 1 line, state 1
3 FEAT 0 line, state 1
4-7 unused (0)
-76-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Bitfields for switch settings:
Bit(s) Description (Table 00023)
0 switch 1 OFF
1 switch 2 OFF
2 switch 3 OFF
3 switch 4 OFF
4-7 unused
(Table 00024)
Values for switch settings on original EGA/VGA:
00h
primary MDA/HGC, secondary EGA+ 40x25
01h-03h primary MDA/HGC, secondary EGA+ 80x25
04h
primary CGA 40x25, secondary EGA+ 80x25 mono
05h
primary CGA 80x25, secondary EGA+ 80x25 mono
06h
primary EGA+ 40x25, secondary MDA/HGC (optional)
07h-09h primary EGA+ 80x25, secondary MDA/HGC (optional)
0Ah
primary EGA+ 80x25 mono,secondary CGA 40x25 (optional)
0Bh
primary EGA+ 80x25 mono,secondary CGA 80x25 (optional)
--------V-1012--BL11------------------------INT 10 - VIDEO - Trident TVGA 8800/8900/9000 BIOS - GET BIOS INFO
AH = 12h
BL = 11h
Return: AL = 12h if function supported
BL = ??? (10h)
ES:BP -> BIOS info structure (see #00025)
SeeAlso: AH=12h/BL=12h"TRIDENT"
Format of Trident BIOS Info structure:
Offset Size
Description (Table 00025)
00h BYTE
??? (0000h)
01h BYTE
OEM Code (00h for original Trident)
02h WORD
ID??? (1073h for 8800BR, 1074 for 8800CS)
04h 8 BYTEs BIOS date ('mm/dd/yy')
0Ch WORD
???
0Eh 8 BYTEs BIOS Version (' C3-128 ', ' C3-129 ')
--------V-1012--BL12------------------------INT 10 - VIDEO - Trident TVGA 8800/8900/9000 BIOS - GET VIDEO RAM SIZE
AH = 12h
BL = 12h
Return: AL = 12h if function supported
-77-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
AH = number of 256K banks of RAM installed
(read from CRTC register 1Fh)
SeeAlso: AH=12h/BL=11h"TRIDENT"
--------V-1012--BL20------------------------INT 10 - VIDEO - ALTERNATE FUNCTION SELECT (PS,EGA,VGA,MCGA) - ALTERNATE PRTSC
AH = 12h
BL = 20h select alternate print screen routine
Return: nothing
Desc: installs a PrtSc routine from the video card's BIOS to replace the
default PrtSc handler from the ROM BIOS, which usually does not
understand screen heights other than 25 lines
Note: some adapters disable print-screen instead of enhancing it
SeeAlso: INT 05"PRINT SCREEN"
--------V-1012--BL2E------------------------INT 10 - Tseng ET-4000 BIOS v3.00 and v8.00 - BUG
AH = 12h
BL = 2Eh
Return: nothing
Note: due to an omitted end-of-list marker, these versions of the BIOS will
crash the system on this function
--------V-1012--BL30------------------------INT 10 - VIDEO - ALTERNATE FUNCTION SELECT (VGA) - SELECT VERTICAL RESOLUTION
AH = 12h
BL = 30h
AL = vertical resolution
00h 200 scan lines
01h 350 scan lines
02h 400 scan lines
Return: AL = 12h if function supported
Desc: specify the number of scan lines used to display text modes
Note: the specified resolution will take effect on the next mode set
SeeAlso: AH=00h
--------V-1012--BL31------------------------INT 10 - VIDEO - ALTERNATE FUNCTION SELECT (VGA, MCGA) - PALETTE LOADING
AH = 12h
BL = 31h
AL = new state
00h enable default palette loading
01h disable default palette loading
Return: AL = 12h if function supported
Desc: specify whether a default palette should be loaded when the display
D:\D\inter61a\INTERRUP.A
-78-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
mode is set
SeeAlso: AH=00h
--------V-1012--BL32------------------------INT 10 - VIDEO - ALTERNATE FUNCTION SELECT (VGA, MCGA) - VIDEO ADDRESSING
AH = 12h
BL = 32h
AL = new state
00h enable video addressing
01h disable video addressing
Return: AL = 12h if function supported
Desc: specify whether the CPU should have access to video memory and the
display adapters I/O registers
--------V-1012--BL33------------------------INT 10 - VIDEO - ALTERNATE FUNCTION SELECT (VGA, MCGA) - GRAY-SCALE SUMMING
AH = 12h
BL = 33h
AL = new state
00h enable gray scale summing
01h disable gray scale summing
Return: AL = 12h if function supported
Desc: specify whether or not colors should be converted to gray scale when
palette or color registers are loaded
SeeAlso: AX=101Bh,AX=BF06h,AX=BF08h
--------V-1012--BL34------------------------INT 10 - VIDEO - ALTERNATE FUNCTION SELECT (VGA) - CURSOR EMULATION
AH = 12h
BL = 34h
AL = new state
00h enable alphanumeric cursor emulation
01h disable alphanumeric cursor emulation
Return: AL = 12h if function supported
Desc: specify whether the BIOS should automatically remap cursor start/end
according to the current character height in text modes
SeeAlso: AH=01h,AH=03h
--------V-1012--BL35------------------------INT 10 - VIDEO - ALTERNATE FUNCTION SELECT (PS) - DISPLAY-SWITCH INTERFACE
AH = 12h
BL = 35h
AL = subfunction
00h initial adapter video off
01h initial planar video on
D:\D\inter61a\INTERRUP.A
-79-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
02h switch active video off
03h switch inactive video on
80h *UNDOCUMENTED* set system board video active flag
ES:DX -> buffer for 128 byte save area (if AL = 00h-03h)
Return: AL = 12h if function supported
Desc: switch between two video adapters which may otherwise have address
conflicts
SeeAlso: AX=BF00h,AX=BF01h,INT 6D"VGA"
--------V-1012--BL36------------------------INT 10 - VIDEO - ALTERNATE FUNCTION SELECT (PS, VGA) - VIDEO REFRESH CONTROL
AH = 12h
BL = 36h
AL = new state
00h enable refresh
01h disable refresh
Return: AL = 12h if function supported
Desc: specify whether the contents of video memory should be displayed on
the screen; disabling refresh effectively blanks the screen
Note: when display refresh is disabled, the entire screen displays the color
specified by the DAC color register 00h; thus to actually blank the
screen, the application must first ensure that that register has been
set to black
BUG: GEM/VIEWMAX ET3000 and ET4000 drivers dated 1988/6/23 do not correctly
reenable refresh after the screen has been blanked due to inactivity,
resulting in a total loss of video synchronization
SeeAlso: AX=BF05h
--------V-1012--BL37------------------------INT 10 - VIDEO - XGA - MAINFRAME INTERACTIVE SUPPORT
AH = 12h
BL = 37h
AL = text attribute type (00h normal VGA, 01h mainframe type)
Return: AL = 12h if supported
SeeAlso: #00026,AH=08h,#00042
D:\D\inter61a\INTERRUP.A
Bitfields for XGA mainframe type character attributes:
Bit(s) Description (Table 00026)
7 blink double rate (75% ON time) or use color 8 as background
(see AX=1003h)
6 reverse video
5 underlined
4 left-most and right-most dots of underline area inverted
-80-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
3 foreground intensity/character font select
2-0 foreground color
SeeAlso: #00014,#00036
--------V-1012--BL38------------------------INT 10 - IBM SurePath BIOS - Officially "Private" Function
AH = 12h
BL = 38h
SeeAlso: AX=1118h,AH=12h/BL=39h
--------V-1012--BL39------------------------INT 10 - IBM SurePath BIOS - Officially "Private" Function
AH = 12h
BL = 39h
SeeAlso: AX=1118h,AH=12h/BL=38h,AH=12h/BL=3Ah
--------V-1012--BL3A------------------------INT 10 - IBM SurePath BIOS - Officially "Private" Function
AH = 12h
BL = 3Ah
SeeAlso: AX=1118h,AH=12h/BL=39h
--------V-1012--BL53------------------------INT 10 - Tseng ET-4000 BIOS v8.00 (1991/06/07) - BUG
AH = 12h
BL = 53h
Note: due to an omitted end-of-list marker, this version of the BIOS will
crash the system on this function
--------V-1012--BL57------------------------INT 10 - Tseng ET-4000 BIOS v8.00 (1991/06/07) - BUG
AH = 12h
BL = 57h
Note: due to an omitted end-of-list marker, this version of the BIOS will
crash the system on this function
--------V-1012--BH55------------------------INT 10 - VIDEO - ALTERNATE FUNC SELECT (ATI,Tatung,Taxan) - ENHANCED FEATURES
AH = 12h
BH = 55h
BL = subfunction
00h disable enhanced features
01h enable enhanced features
02h get status
Return: AL = status flags (see #00027)
03h disable register trapping (CGA emulation)
04h enable register trapping
D:\D\inter61a\INTERRUP.A
-81-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
05h program video mode
ES:BP -> video mode table (see #00028)
06h get mode table
AL = video mode
Return: ES:BP -> table suitable for mode AL
(and subfunc BL=05h) (see #00028)
BP = FFFFh on error
SI = 0000h (ATI Mach32)
Note: the ATI Mouse driver (MOUSE.COM/MOUSE.SYS) uses subfunction 06h to get
the mode table for mode 03h, and then looks for a signature string
beginning within 32 bytes of the offset specified by the word at
ES:000Ch
SeeAlso: AH=FFh"Oak"
Index: installation check;ATI video adapters
D:\D\inter61a\INTERRUP.A
Bitfields for status flags:
Bit(s) Description (Table 00027)
3 set if enhanced features enabled
7-5 monitor type
000 PS/2 mono
001 PS/2 color
010 multi-sync
011 Taxan 650 25kHz
100 RGB
101 mono
110 EGA
111 Compaq internal
Format of ATI VGA Wonder video mode table:
Offset Size Description (Table 00028)
00h BYTE number of columns
01h BYTE maximum row (number of rows - 1)
02h BYTE scan lines per row
03h WORD video buffer size in bytes
05h 4 BYTEs values for Sequencer registers 1-4
09h BYTE value for Miscellaneous Output register
0Ah 25 BYTEs values for CRTC registers 00h-18h
00h horizontal total size (chars)
01h horizontal displayed (chars)
02h horizontal sync position (chars)
03h horizontal sync width (chars)
-82-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
04h vertical total size (char rows)
05h vertical total adjust (scan lines)
06h vertical displayed (char rows)
07h vertical sync position (char rows)
08h interlace mode
09h max scan line in row
0Ah cursor start scan line
0Bh cursor end scan line
0Ch screen memory start (high)
0Dh screen memory start (low)
0Eh cursor address (high)
0Fh cursor address (low)
10h light pen (high)
11h light pen (low)
23h 20 BYTEs default palette (values for Attribute Controller regs 00h-13h)
37h 9 BYTEs values for Graphics Controller registers 00h-08h
--------V-1012--BL74------------------------INT 10 - Tseng ET-4000 BIOS v3.00 and v8.00 - BUG
AH = 12h
BL = 74h
Note: due to an omitted end-of-list marker, these versions of the BIOS will
crash the system on this function
--------V-1012--BL80------------------------INT 10 - Tseng ET-4000 BIOS v3.00 and v8.00 - BUG
AH = 12h
BL = 80h
Note: due to an omitted end-of-list marker, these versions of the BIOS will
crash the system on this function
--------V-1012--BL80------------------------INT 10 - Cirrus Logic BIOS - INQUIRE VGA TYPE
AH = 12h
BL = 80h
Return: AX = controller type in bits 13-0 (see #00029)
bit 14: ???
bit 15: ???
BL = silicon revision number (bit 7 set if not available)
BH = ???
bit 2 set if using CL-GD 6340 LCD interface
SeeAlso: AH=12h/BL=81h,AH=12h/BL=82h,AH=12h/BL=85h,AH=12h/BL=9Ah,AH=12h/BL=A1h
D:\D\inter61a\INTERRUP.A
(Table 00029)
-83-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
Values for Cirrus Logic video controller type:
0000h no extended alternate select support
0001h reserved
0002h CL-GD510/520
0003h CL-GD610/620
0004h CL-GD5320
0005h CL-GD6410
0006h CL-GD5410
0007h CL-GD6420
0008h CL-GD6412
0010h CL-GD5401
0011h CL-GD5402
0012h CL-GD5420
0013h CL-GD5422
0014h CL-GD5424
0015h CL-GD5426
0016h CL-GD5420r1
0017h CL-GD5402r1
0018h CL-GD5428
0019h CL-GD5429
0020h CL-GD6205/15/25
0021h CL-GD6215
0022h CL-GD6225
0023h CL-GD6235
0024h CL-GD6245
0030h CL-GD5432
0031h CL-GD5434
0032h CL-GD5430
0033h CL-GD5434 rev. E and F
0035h CL-GD5440
0036h CL-GD5436
0039h CL-GD5446
0040h CL-GD6440
0041h CL-GD7542 (Nordic)
0042h CL-GD7543 (Viking)
0043h CL-GD7541 (Nordic Lite)
0050h CL-GD5452 (Northstar)
0052h CL-GD5452 (Northstar) ???
SeeAlso: #00732,#00743
--------V-1012--BL81------------------------INT 10 - Cirrus Logic BIOS - GET BIOS VERSION NUMBER
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
-84-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
AH = 12h
BL = 81h
Return: AH = BIOS major version
AL = BIOS minor version
SeeAlso: AH=12h/BL=80h,AH=12h/BL=82h
--------V-1012--BL82------------------------INT 10 - Cirrus Logic BIOS - GET DESIGN REVISION CODE
AH = 12h
BL = 82h
Return: AL = chip revision
AH = ??? (AFh for v1.01)
SeeAlso: AH=12h/BL=80h,AH=12h/BL=81h,#00732 at INT 1A/AX=B102h
--------V-1012--BL84------------------------INT 10 - Cirrus Logic BIOS v3.02 - INQUIRE OPTIONS
AH = 12h
BL = 84h
Return: AX = user options word (see #00030)
SeeAlso: AH=12h/BL=89h,AH=12h/BL=8Ah,AH=12h/BL=8Bh,AH=12h/BL=8Ch,AH=12h/BL=8Fh
SeeAlso: AH=12h/BL=90h,AH=12h/BL=9Ah
D:\D\inter61a\INTERRUP.A
Bitfields for Cirrus Logic user options word:
Bit(s) Description (Table 00030)
1,0 centering
00 vertical centered, 01 from bottom, 10 from top, 11 reserved
3,2 720-dot fix-up options
00 OR every 8th and 9th pixel
01 display MGA mode from left
10 display MGA mode from right
11 skip every 9th pixel
4 ???
7-5 video mode (001 CGA, 010 MGA, 011 EGA, 100 VGA)
8 external monitor enabled instead of LCD panel
9 vertical expand mode enabled
10 8-bit mode instead of 16-bit mode
11 normal video rather than reverse video (for LCD)
12 attribute automap rather than attribute emulation
13 bold mode disabled (default)
14 fast bandwidth
15 ???
--------V-1012--BL85------------------------INT 10 - Cirrus Logic BIOS - GET INSTALLED MEMORY
-85-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
AH = 12h
BL = 85h
Return: AL = number of 64K banks of video memory
SeeAlso: AH=12h/BL=80h,AH=12h/BL=93h
--------V-1012--BL89------------------------INT 10 - Cirrus Logic BIOS v3.02 - LCD panel - EN/DISABLE REVERSE VIDEO MODE
AH = 12h
BL = 89h
AL = new state (00h enabled, 01h disabled)
Return: nothing
SeeAlso: AH=12h/BL=84h,AH=12h/BL=8Ah,AH=12h/BL=8Bh
--------V-1012--BL8A------------------------INT 10 - Cirrus Logic BIOS v3.02 - LCD panel - SET FRAME COLOR
AH = 12h
BL = 8Ah
AL = new gray-scale color (00h = black to 0Fh = white)
Return: nothing
SeeAlso: AH=12h/BL=84h,AH=12h/BL=89h,AH=12h/BL=8Fh
--------V-1012--BL8B------------------------INT 10 - Cirrus Logic BIOS v3.02 - LCD panel - ENABLE/DISABLE BOLD MODE
AH = 12h
BL = 8Bh
AL = new state (00h enabled, 01h disabled)
Return: nothing
SeeAlso: AH=12h/BL=84h,AH=12h/BL=89h,AH=12h/BL=8Ch,AH=12h/BL=8Fh
--------V-1012--BL8C------------------------INT 10 - Cirrus Logic BIOS v3.02 - LCD panel - SET AUTOMAP/EMULATE ATTRIBUTES
AH = 12h
BL = 8Ch
AL = new state
00h enable automap
01h disable automap and emulate attributes
Return: nothing
SeeAlso: AH=12h/BL=84h,AH=12h/BL=8Bh
--------V-1012--BL8F------------------------INT 10 - Cirrus Logic BIOS v3.02 - LCD panel - ENABLE/DISABLE EXPAND MODE
AH = 12h
BL = 8Fh
AL = new state (00h enabled, 01h disabled)
Return: nothing
Note: when expand mode is enabled, the vertical dimension is enlarged to
D:\D\inter61a\INTERRUP.A
-86-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
full screen
SeeAlso: AH=12h/BL=84h,AH=12h/BL=89h,AH=12h/BL=8Bh,AH=12h/BL=90h
--------V-1012--BL90------------------------INT 10 - Cirrus Logic BIOS v3.02 - LCD panel - SET CENTERING MODE
AH = 12h
BL = 90h
AL = new position
00h centered
01h from top
02h from bottom
03h from top
Return: nothing
SeeAlso: AH=12h/BL=84h,AH=12h/BL=8Fh
--------V-1012--BL91------------------------INT 10 - Cirrus Logic BIOS v3.02 - LCD panel - SET 720-DOT FIXUP MODE
AH = 12h
BL = 91h
AL = new mode
00h display MGA mode from left of screen (default)
01h display MGA from right
02h skip every ninth pixel
03h OR every 8th and 9th pixel
Return: nothing
SeeAlso: AH=12h/BL=84h,AH=12h/BL=8Ah,AH=12h/BL=90h
--------V-1012--BL92------------------------INT 10 - Cirrus Logic BIOS v3.02 - LCD panel - SWITCH DISPLAY
AH = 12h
BL = 92h
AL = new display (00h LCD, 01h external monitor)
Return: nothing
Note: the deselected display is disabled
SeeAlso: AH=12h/BL=84h,AH=12h/BL=89h,AH=12h/BL=90h,AH=12h/BL=94h
--------V-1012--BL93------------------------INT 10 - Cirrus Logic BIOS - FORCE 8-BIT OR 16-BIT OPERATION
AH = 12h
BL = 93h
AL = new I/O width (00h = 16 bits, 01h = 8 bits)
Return: nothing
SeeAlso: AH=12h/BL=9Ah
--------V-1012--BL94------------------------INT 10 - Cirrus Logic BIOS v3.02 - POWER CONSERVATION
D:\D\inter61a\INTERRUP.A
-87-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
AH = 12h
BL = 94h
AL = new state (00h wake up monitor, 01h shut down display)
Return: nothing
Note: AL=01h is reported not to work properly on the LCD panel
SeeAlso: AH=12h/BL=84h,AH=12h/BL=92h
--------V-1012--BL9A------------------------INT 10 - Cirrus Logic BIOS - GET USER OPTIONS
AH = 12h
BL = 9Ah
Return: AX = options word 1 (see #00031)
CX = options word 2 (see #00032)
BX,DX reserved
SeeAlso: AH=12h/BL=80h,AH=12h/BL=84h,AH=12h/BL=93h,AH=12h/BL=A0h
SeeAlso: AH=12h/BL=A3h,AH=12h/BL=A4h,#00732 at INT 1A/AX=B102h
D:\D\inter61a\INTERRUP.A
Bitfields for Cirrus Logic options word 1:
Bit(s) Description (Table 00031)
0,1 reserved
2-4 monitor type
5-6 maximum vertical resolution
7-9 reserved
10 force 8-bit operation
11-13 reserved
14 vertical refresh frequency at 640x480
=0 60 Hz
=1 high refresh
15 reserved
SeeAlso: AH=12h/BL=AEh
Bitfields for Cirrus Logic options word 2:
Bit(s) Description (Table 00032)
15-13 vertical refresh frequency at 1024x768
12-11 vertical refresh frequency at 800x600
10-6 reserved
5-4 vertical refresh frequency at 1280x1024
3-0 reserved
SeeAlso: #00033
Bitfields for Cirrus Logic Options word 2 (alternate???):
Bit(s) Description (Table 00033)
-88-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
15-12 vertical refresh frequency at 1024x768
0000 43i Hz
0001 60 Hz
0010 70 Hz
0011 72 Hz
0100 76 Hz
other reserved
11-8 vertical refresh frequency at 800x600
0000 56 Hz
0001 60 Hz
0010 72 Hz
0011 75 Hz
other reserved
7-4 maximum vertical resolution
0000 480 scanlines
0001 600 scanlines
0010 768 scanlines
0011 1024 scanlines
other reserved
3-1 vertical refresh frequency at 1280x1024
000 43i Hz
001 60
Hz
010 71.2 Hz (CL-GD5434 rev. E and F)
011 74
Hz (CL-GD5434 rev. E and F)
other reserved
0 reserved
SeeAlso: #00032
--------V-1012--BLA0------------------------INT 10 - Cirrus Logic BIOS - GET VIDEO MODE AVAILABILITY
AH = 12h
BL = A0h
AL = video mode number (00h-7Fh)
Return: AH bit 0: video mode supported
BX = offset of BIOS subroutine to fixup standard video parameters
(call subroutine with DS:SI and ES:DI as returned by this call)
DS:SI -> standard video parameters or FFFFh:FFFFh
ES:DI -> supplemental video parameters or FFFFh:FFFFh
SeeAlso: AH=00h,AH=12h/BL=9Ah,AH=12h/BL=A1h
--------V-1012--BLA1------------------------INT 10 - Cirrus Logic BIOS - READ MONITOR TYPE AND ID FROM 15-PIN CONNECTOR
AH = 12h
D:\D\inter61a\INTERRUP.A
-89-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
BL = A1h
Return: BH = monitor ID (see #00034)
BL = monitor type (00h color, 01h grayscale, 02h no display)
SeeAlso: AH=12h/BL=9Ah,AH=12h/BL=A2h
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00034)
Values for Cirrus Logic monitor ID:
00h-08h reserved
09h IBM 8604/8507 or equivalent
0Ah IBM 8514 or equivalent
0Bh IBM 8515 or equivalent
0Dh IBM 8503 or equivalent
0Eh IBM 8512/8513 or equivalent
0Fh no monitor
--------V-1012--BLA2------------------------INT 10 - Cirrus Logic BIOS - SET MONITOR HORIZONTAL RETRACE FREQUENCY
AH = 12h
BL = A2h
AL = retrace rate
00h standard VGA (31.5 kHz)
01h 8514-compatible (31.5 kHz and 35.5 kHz interlaced)
02h SuperVGA (31.5-35.1 kHz)
03h extended SuperVGA (31.5-35.5 kHz)
04h multi-frequency (31.5-37.8 kHz)
05h extended multi-frequency (31.5-48.0 kHz)
06h super multi-frequency (31.5-56.0 kHz)
07h extended super multi-frequency (31.5-64.0 kHz)
Return: nothing
SeeAlso: AH=12h/BL=9Ah,AH=12h/BL=A0h,AH=12h/BL=A4h
--------V-1012--BLA3------------------------INT 10 - Cirrus Logic BIOS - SET VGA REFRESH
AH = 12h
BL = A3h
AL = refresh rate for 640x480 (00h normal, 01h high)
Return: nothing
SeeAlso: AH=12h/BL=9Ah,AH=12h/BL=A4h
--------V-1012--BLA4------------------------INT 10 - Cirrus Logic BIOS - SET MONITOR TYPE
AH = 12h
BL = A4h
AL = options 1
-90-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
bits 7-4 = vertical refresh at 640x480
(0 = 60Hz, 1 = 72Hz, other reserved)
bits 3-0 = maximum vertical resolution
(0 = 480 scanlines, 1 = 600, 2 = 768, 3 = 1024, other reserved)
BH = options 2
bits 7-4 = vertical refresh at 1024x768
(0=87Hz-int, 1=60Hz, 2=70Hz, 3=72Hz, 4=76Hz, other reserved)
bits 3-0 = vertical refresh at 800x600
(0 = 56Hz, 1 = 60Hz, 2 = 72Hz, other reserved)
CH = options 3
bits 7-4 = vertical refresh at 1280x1024
(0=87Hz-int, 1=60Hz, 2=70Hz, other reserved)
bits 3-0: reserved
CL,DX reserved
Return: nothing
SeeAlso: AH=12h/BL=9Ah,AH=12h/BL=A3h
--------V-1012--BLAE------------------------INT 10 - Cirrus Logic BIOS - GET HIGH REFRESH
AH = 12h
BL = AEh
Return: AL = result
bits 7-1: reserved
bit 0:
640x480 high refresh rate
=0 72 Hz
=1 75 Hz
SeeAlso: AH=12h/BL=9Ah,AH=12h/BL=A3h,AH=12h/BL=A4h,AH=12h/BL=AFh
--------V-1012--BLAF------------------------INT 10 - Cirrus Logic BIOS - SET HIGH REFRESH
AH = 12h
BL = AFh
AL = option
bits 7-1: reserved
bit 0:
640x480 high refresh rate
=0 72 Hz
=1 75 Hz
Return: nothing
SeeAlso: AH=12h/BL=9Ah,AH=12h/BL=A3h,AH=12h/BL=A4h,AH=12h/BL=AEh
--------V-1012--BLBE------------------------INT 10 - Tseng ET-4000 BIOS v3.00 and v8.00 - BUG
AH = 12h
BL = BEh
D:\D\inter61a\INTERRUP.A
-91-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Note: due to an omitted end-of-list marker, these versions of the BIOS will
crash the system on this function
--------V-1012--BLC6------------------------INT 10 - Tseng ET-4000 BIOS v3.00 and v8.00 - BUG
AH = 12h
BL = C6h
Note: due to an omitted end-of-list marker, these versions of the BIOS will
crash the system on this function
--------V-1012--BLF0------------------------INT 10 - Tseng ET-4000 BIOS v3.00 and v8.00 - BUG
AH = 12h
BL = F0h
Note: due to an omitted end-of-list marker, these versions of the BIOS will
crash the system on this function
--------V-1012--BLF1-------------------------INT 10 - Tseng ET-4000 BIOS - GET/SET SCREEN REFRESH RATE
AH = 12h
BL = F1h
AL = subfunction
00h set refresh rate
01h get refresh rate
BH = video mode
00h 640x480
01h 800x600
02h 1024x768
03h 1280x1024
CX = new refresh rate (see #00035) if AL = 00h
Return: AL = 12h if supported
CX = current rate (for AL=00h, a changed CX indicates failure)
(Table 00035)
Values for Tseng ET4000 refresh rate:
CX 640x480 800x600
1024x768/1280x1024
00h 60 Hz 56 Hz
interlaced
01h 72 Hz 60 Hz
60 Hz
02h 75 Hz 72 Hz
70 Hz
03h 90 Hz 75 Hz
75 Hz
04h -90 Hz
---------V-1013------------------------------INT 10 - VIDEO - WRITE STRING (AT and later,EGA)
AH = 13h
-92-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
AL = write mode
bit 0: update cursor after writing
bit 1: string contains alternating characters and attributes
bits 2-7: reserved (0)
BH = page number
BL = attribute if string contains only characters
CX = number of characters in string
DH,DL = row,column at which to start writing
ES:BP -> string to write
Return: nothing
Notes: recognizes CR, LF, BS, and bell; for the ET4000 BIOS, scrolling,
backspace, and CR only take place in the active page
also available PC or XT with EGA or higher
HP 95LX only supports write mode 00h
IBM documents AL=10h,11h,20h,21h as "private" rather than "reserved"
with PhysTechSoft's PTS ROM-DOS the AL,BH,BL,DH, and DL values are
ignored on entry.
BUG: on the IBM VGA Adapter, any scrolling which may occur is performed on
the active page rather than the requested page
SeeAlso: AH=09h,AH=0Ah,AH=13h"DOS/V"
--------J-1013------------------------------INT 10 - DOS/V - READ/WRITE DOUBLE-BYTE CHARACTER SET CHARACTERS/ATTRIBUTES
AH = 13h
AL = function
10h read characters and standard attributes
11h read characters and extended attributes
12h write characters and standard attributes
13h write characters and extended attributes
BH = 00h
CX = number of characters to transfer
DH,DL = row,column at which to start transfer
ES:BP -> buffer for/containing characters and attributes (see #00036)
Return: ES:BP buffer filled if reading
Program: DOS/V is a Japanese-language version of MS-DOS which can run on
standard (non-Japanese) ATs and compatible equipped with a VGA or
newer video adapter
Notes: subfunctions 11h and 13h are only valid when DOS/V is using video
mode 73h
the cursor position is not changed by these functions
extended attributes consist of three bytes; the first is the standard
character attribute byte, the second is as described below, and the
D:\D\inter61a\INTERRUP.A
-93-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
third is always zero in current versions
SeeAlso: AH=00h,AH=13h"VIDEO"
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Bitfields for DOS/V second extended attribute byte:
Bit(s) Description (Table 00036)
7 underline using foreground color
6 reverse foreground/background specified in standard attribute byte
5-4 unused
3 vertical white grid line in cell
2 horizontal white grid line in cell
1-0 unused
SeeAlso: #00014,#00026
--------V-101400----------------------------INT 10 - VIDEO - LOAD USER-SPECIFIED LCD CHARACTER FONT (CONV,Compaq Port 386)
AX = 1400h
ES:DI -> character font
BH = number of bytes per character
08h or 10h (Compaq)
BL = 00h load main font (block 0)
01h load alternate font (block 1)
CX = number of characters to store
DX = character offset into RAM font area
Return: nothing
SeeAlso: AX=1100h,AX=1110h,AX=1401h
--------V-101401----------------------------INT 10 - VIDEO - LOAD SYSTEM ROM DEFAULT LCD CHARACTER FONT (CONV,CP386)
AX = 1401h
BL = font to load
00h main font (block 0)
01h alternate font (block 1)
Return: nothing
SeeAlso: AX=1100h,AX=1102h,AX=1400h
--------V-101402----------------------------INT 10 - VIDEO - SET MAPPING OF LCD HIGH INTENSITY ATTRIBUTES (CONV,CP386)
AX = 1402h
BL = subfunction
00h ignore high intensity attribute
01h map high intensity to reverse video
02h map high intensity to underscore
03h map high intensity to selected alternate font
B0h half intensity (Compaq)
-94-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
B1h toggle active intensity bit interpretation (CP386)
Return: nothing
--------V-1015------------------------------INT 10 - VIDEO - GET PHYSICAL DISPLAY PARAMETERS (CONVERTIBLE)
AH = 15h
Return: AX = alternate display adapter type (see #00037)
ES:DI -> parameter table (see #00038)
SeeAlso: AH=1Bh
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00037)
Values for PC Convertible alternate display adapter type:
0000h none
5140h LCD
5153h CGA
5151h mono
Format of PC Convertible display parameter table:
Offset Size Description (Table 00038)
00h WORD monitor model number
02h WORD vertical pixels per meter
04h WORD horizontal pixels per meter
06h WORD total vertical pixels
08h WORD total horizontal pixels
0Ah WORD horizontal pixel separation in micrometers
(width, center-to-center)
0Ch WORD vertical pixel separation in micrometers
(height, center-to-center)
--------V-1015------------------------------INT 10 - VIDEO - SET SUPERIMPOSE MODE (Sperry PC)
AH = 15h
AL = superimpose mode
00h show graphics screen
01h show text screen
02h show text screen superimposed on graphics screen
Return: nothing
--------J-1018------------------------------INT 10 - VIDEO - DOS/V - GET/SET FONT PATTERN
AH = 18h
AL = subfunction
00h get font pattern
01h set font pattern
-95-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
BX = 0000h
CL = character size in bytes (01h,02h)
CH = 00h
DH = character width in pixels
DL = character height in pixels
ES:DI -> buffer for/containing font image
Return: AL = status (00h successful, else error)
ES:DI buffer filled for function 00h if successful
Note: the supported font sizes are 8x16 single-byte, 8x19 single-byte,
16x16 double-byte, and 24x24 double-byte
SeeAlso: AH=19h,INT 16/AH=14h
--------V-1019------------------------------INT 10 - Japanese VIDEO - DOUBLE-BYTE CHARACTER SET SHIFT INFORMATION
AH = 19h
???
Return: ???
SeeAlso: AH=18h,INT 16/AH=14h
--------V-101A00----------------------------INT 10 - VIDEO - GET DISPLAY COMBINATION CODE (PS,VGA/MCGA)
AX = 1A00h
Return: AL = 1Ah if function was supported
BL = active display code (see #00039)
BH = alternate display code (see #00039)
Notes: this function is commonly used to check for the presence of a VGA
this function is supported on the ATI EGA Wonder with certain
undocumented configuration switch settings, even though the EGA
Wonder does not support VGA graphics; to distinguish this case,
call AX=1C00h with CX nonzero, which the EGA Wonder does not support
SeeAlso: AH=12h/BL=35h,AX=1A01h,AH=1Bh,AH=1Ch,MEM 0040h:008Ah
Index: installation check;VGA
D:\D\inter61a\INTERRUP.A
(Table 00039)
Values for display combination code:
00h no display
01h monochrome adapter w/ monochrome display
02h CGA w/ color display
03h reserved
04h EGA w/ color display
05h EGA w/ monochrome display
06h PGA w/ color display
07h VGA w/ monochrome analog display
-96-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
08h VGA w/ color analog display
09h reserved
0Ah MCGA w/ digital color display
0Bh MCGA w/ monochrome analog display
0Ch MCGA w/ color analog display
FFh unknown display type
--------V-101A01----------------------------INT 10 - VIDEO - SET DISPLAY COMBINATION CODE (PS,VGA/MCGA)
AX = 1A01h
BL = active display code (see #00039)
BH = alternate display code
Return: AL = 1Ah if function was supported
SeeAlso: AH=12h/BL=35h,AX=1A00h
--------V-101B------------------------------INT 10 - VIDEO - FUNCTIONALITY/STATE INFORMATION (PS,VGA/MCGA)
AH = 1Bh
BX = implementation type
0000h return funtionality/state information
ES:DI -> 64-byte buffer for state information (see #00040)
Return: AL = 1Bh if function supported
ES:DI buffer filled with state information
BUG: Trident 8900 (BIOS D3.0 1991/11/12) and Trident 9000 (C3.0 1991/10/25)
do not correctly set the fields at offsets 27h and 29h of the
state information
SeeAlso: AH=15h,AX=1A00h,AX=1F01h
D:\D\inter61a\INTERRUP.A
Format of MCGA+ state information:
Offset Size Description (Table 00040)
00h DWORD address of static funtionality table (see #00045)
04h BYTE video mode in effect
05h WORD number of columns
07h WORD length of regen buffer in bytes
09h WORD starting address of regen buffer
0Bh WORD cursor position for page 0
0Dh WORD cursor position for page 1
0Fh WORD cursor position for page 2
11h WORD cursor position for page 3
13h WORD cursor position for page 4
15h WORD cursor position for page 5
17h WORD cursor position for page 6
19h WORD cursor position for page 7
-97-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
1Bh WORD cursor "type" (start/stop scan lines)
1Dh BYTE active display page
1Eh WORD CRTC port address
20h BYTE current setting of PORT 03x8h
21h BYTE current setting of PORT 03x9h
22h BYTE number of rows - 1
23h WORD bytes/character
25h BYTE display combination code of active display
26h BYTE DCC of alternate display
27h WORD number of colors supported in current mode (0000h = mono)
29h BYTE number of pages supported in current mode
2Ah BYTE number of scan lines active
(0,1,2,3) = (200,350,400,480)
Tseng ET3000: (4,5,6 = 512,600,768)
2Bh BYTE primary character block
2Ch BYTE secondary character block
2Dh BYTE miscellaneous flags (see #00041)
2Eh BYTE non-VGA mode support (see #00042)
2Fh 2 BYTEs reserved (00h)
31h BYTE video memory available
00h = 64K, 01h = 128K, 02h = 192K, 03h = 256K
32h BYTE save pointer state flags (see #00043)
33h BYTE display information and status (see #00044)
34h 12 BYTEs reserved (00h)
D:\D\inter61a\INTERRUP.A
Bitfields for miscellaneous flags:
Bit(s) Description (Table 00041)
0 all modes on all displays on
1 gray summing on
2 monochrome display attached
3 default palette loading disabled
4 cursor emulation enabled
5 0 = intensity; 1 = blinking
6 flat-panel display is active
7 unused (0)
SeeAlso: #00040
Bitfields for non-VGA mode support:
Bit(s) Description (Table 00042)
7-5 reserved
4 132-column mode supported
-98-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
3 =1 MFI attributes enabled (see AH=12h/BL=37h)
=0 VGA attributes
2 16-bit VGA graphics present
1 adapter interface driver required
0 BIOS supports information return for adapter interface
SeeAlso: #00040
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Bitfields for save pointer state flags:
Bit(s) Description (Table 00043)
0 512 character set active
1 dynamic save area present
2 alpha font override active
3 graphics font override active
4 palette override active
5 DCC override active
6-7 unused (0)
SeeAlso: #00040
Bitfields for display information and status:
Bit(s) Description (Table 00044)
7 640x480 flat-panel can be used simultaneously with CRT controller
6-3 reserved
2 color display
1 flat-panel display active
0 flat-panel display attached
SeeAlso: #00040
Format of Static Functionality Table:
Offset Size Description (Table 00045)
00h BYTE modes supported 1
bit 0 to bit 7 = 1 modes 0,1,2,3,4,5,6,7 supported
01h BYTE modes supported 2
bit 0 to bit 7 = 1 modes 8,9,0Ah,0Bh,0Ch,0Dh,0Eh,0Fh supported
02h BYTE modes supported 3
bit 0 to bit 3 = 1 modes 10h,11h,12h,13h supported
bit 4 to bit 7 unused (0)
03h BYTE (IBM) reserved
(Tseng ET3000/4000) modes supported 4
bit 0 to bit 7 = modes 18h-1Fh supported
04h BYTE (IBM) reserved
(Tseng ET3000/4000) modes supported 5
-99-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
bit 0 to bit 7 = modes 20h-27h supported
05h BYTE (IBM) reserved
(Tseng ET3000/4000) modes supported 6
bit 0 to bit 7 = modes 28h-2Fh supported
06h BYTE (IBM) reserved
(Tseng ET3000/4000) modes supported 7
bit 0 to bit 7 = modes 30h-37h supported
07h BYTE scan lines supported
bit 0 to bit 2 = 1 if scan lines 200,350,400 supported
bits 3-7 = unused (0)
08h BYTE total number of character blocks available in text modes
09h BYTE maximum number of active character blocks in text modes
0Ah WORD miscellaneous function support flags (see #00046)
0Ch WORD reserved
0Eh BYTE save pointer function flags (see #00047)
0Fh BYTE reserved
SeeAlso: #00040
D:\D\inter61a\INTERRUP.A
Bitfields for miscellaneous function support flags:
Bit(s) Description (Table 00046)
0 all modes on all displays function supported
1 gray summing function supported
2 character font loading function supported
3 default palette loading enable/disable supported
4 cursor emulation function supported
5 EGA palette present
6 color palette present
7 color-register paging function supported
8 light pen supported (see AH=04h)
9 save/restore state function 1Ch supported
10 intensity/blinking function supported (see AX=1003h)
11 Display Combination Code supported (see #00039)
12-15 unused (0)
SeeAlso: #00040
Bitfields for save pointer function flags:
Bit(s) Description (Table 00047)
0 512 character set supported
1 dynamic save area supported
2 alpha font override supported
3 graphics font override supported
-100-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
4 palette override supported
5 DCC extension supported
6-7 unused (0)
SeeAlso: #00040
--------V-101C------------------------------INT 10 - VIDEO - SAVE/RESTORE VIDEO STATE (PS50+,VGA)
AH = 1Ch
AL = function
00h return state buffer size
Return: BX = number of 64-byte blocks needed
01h save video state
ES:BX -> buffer
02h restore video state
ES:BX -> buffer containing previously saved state
CX = requested states (see #00048)
Return: AL = 1Ch if function supported
Notes: many BIOSes corrupt the video registers when saving the state, so a
program should restore the state immediately after saving it (the
saved data is uncorrupted)
the BIOS data area consists of the 96 bytes from 0040h:0049h-00A8h
this function is not supported when DOS/V is running
this function may be a better VGA installation check than the usual
INT 10/AX=1A00h, since some late-model EGA cards (such as the ATI
EGA Wonder) supported that call
SeeAlso: AX=1A00h,AX=5F90h,AX=5FA0h,MEM 0040h:00A8h
D:\D\inter61a\INTERRUP.A
Bitfields for requested states:
Bit(s) Description (Table 00048)
0 video hardware (see #00049)
1 BIOS data areas
2 color registers and DAC state (see #00050)
3-15 unused (0)
SeeAlso: #00186
Format of VGA video hardware state:
Offset Size Description (Table 00049)
00h BYTE sequencer index register
01h BYTE CRTC index register
02h BYTE graphics controller index register
03h BYTE attribute controller index register
04h BYTE feature controller register
-101-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
05h 4 BYTEs sequencer registers
09h BYTE sequencer register 0
0Ah 25 BYTEs CRTC registers 0-8
23h 16 BYTEs palette registers 00h-0Fh
33h 4 BYTEs attribute registers 10h-13h
37h 9 BYTEs graphics controller registers 0-8
40h BYTE CRTC base address (low)
41h BYTE CRTC base address (high)
42h BYTE plane 0 latch
43h BYTE plane 1 latch
44h BYTE plane 2 latch
45h BYTE plane 3 latch
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Format of VGA DAC state:
Offset Size Description (Table 00050)
00h BYTE read/write mode DAC
01h BYTE pixel address
02h BYTE pixel mask
03h 768 BYTEs color data (256 triples)
303h BYTE color select register
--------J-101D------------------------------INT 10 - VIDEO - DOS/V - SHIFT STATUS LINE CONTROL
AH = 1Dh
AL = function
00h enable shift status line(s)
BX = number of lines to reserve at bottom of screen (usu. 1)
01h disable shift status line
BX = number of lines reserved at bottom of screen (usually 1)
02h get number of status lines
Return: BX = number of lines reserved for shift status
SeeAlso: AH=19h
--------V-101D------------------------------INT 10 - SpeedSTAR Plus BIOS v4.23+ - SET SYNC PARAMETERS
AH = 1Dh
AL = video mode
ES = caller's segment
Return: nothing
Note: the caller's segment contains at offset 5Ch (FCB field in PSP)
or 100h a table with sync parameters (see #00051) (BIOS looks at both
offsets)
-102-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Format of SpeedSTAR Plus sync table:
Offset Size Description (Table 00051)
00h 9 BYTEs ID contains string 'ey5CENTER'
09h 5 BYTEs sync parameters for 640x480 modes 11h,12h,25h,26h,2Eh
0Bh 5 BYTEs sync parameters for 800x600 modes 29h,30h,2Ah
13h 5 BYTEs sync parameters for 1024x768 modes 37h,38h
--------V-101D------------------------------INT 10 - Tseng ET-4000 BIOS v3.00 and v8.00 - BUG
AH = 1Dh
Note: these versions of the BIOS jump to a random location on this function
due to a fencepost error
--------V-101DAABXFDEC----------------------INT 10 U - Diamond Stealth64 Video - INSTALLATION CHECK
AX = 1DAAh
BX = FDECh
Return: BX = CDEFh if Diamond Stealth64 Video 2001-series video card installed
AL = number of megabytes of video memory
AH = card type??? (4Bh for VL-Bus/5Bh for PCI)
CX = ??? (0000h)
SI:DI -> signature/copyright string
--------V-101E00----------------------------INT 10 - VIDEO - FLAT-PANEL - READ INFORMATION
AX = 1E00h
Return: AL = 1Eh if function supported
BL = flat-panel status (see #00052)
ES:DI -> information table (see #00053)
Note: IBM classifies this function as optional
SeeAlso: AX=1E01h,AX=1E02h,AX=1E03h,AX=1E04h,AX=1E05h,AX=1EFEh
Bitfields for flat-panel status:
Bit(s) Description (Table 00052)
7-3 reserved
2 color display
1 flat panel is active
0 flat panel is attached
SeeAlso: #00053
Format of flat-panel information table:
Offset Size Description (Table 00053)
00h BYTE number of WORDs in the remainder of the table
01h WORD number of vertical pixels per meter
-103-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
03h WORD number of horizontal pixels per meter
05h WORD total number of vertical pixels
07h WORD total number of horizontal pixels
09h WORD vertical pixel separation in micrometers (center-to-center)
0Bh WORD horizontal pixel separation in micrometers
0Dh WORD range of gray levels available, less 1
0Fh WORD number of red levels available, less 1 (0000h if nonochrome)
11h WORD number of green levels available, less 1 (0000h if nonochrome)
13h WORD number of blue levels available, less 1 (0000h if nonochrome)
SeeAlso: #00052
--------V-101E01----------------------------INT 10 - VIDEO - FLAT-PANEL - LCD/CRT DISPLAY CONTROL
AX = 1E01h
BH = function
bit 7: =1 set display control, =0 query control
bits 6-0: reserved (0)
---if BH bit 7 set--BL = new display combination (see #00054)
Return: AL = 1Eh if function supported
BH = results
bit 7: query/set (copied from input)
bits 6-3: reserved (0)
bit 2: simultaneous display is supported by hardware
bit 1: LCD/CRT display control supported by hardware
bit 0: set operation was successful (always clear on get)
BL = active display combination (see #00054)
SeeAlso: AX=1E00h,AX=1E02h
D:\D\inter61a\INTERRUP.A
Bitfields for Flat-Panel display combination:
Bit(s) Description (Table 00054)
7-2 reserved (0)
1-0 combination
00 reserved
01 LCD active
10 CRT active
11 both LCD and CRT active (simultaneous display)
SeeAlso: #00055
--------V-101E02----------------------------INT 10 - VIDEO - FLAT-PANEL - DISPLAY POSITION
AX = 1E02h
BH = function
-104-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
bit 7: =1 set display position, =0 query position
bits 6-0: reserved (0)
---if BH bit 7 set--BL = new position setting (see #00055)
Return: AL = 1Eh if function supported
BH = results
bit 7: query/set (copied from input)
bits 6-4: reserved (0)
bit 3: positioning to top is supported by hardware
bit 2: positioning to center is supported by hardware
bit 1: positioning to bottom is supported by hardware
bit 0: set operation was successful (always clear on get)
BL = active position setting (see #00055)
SeeAlso: AX=1E00h,AX=1E01h
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Bitfields for Flat-Panel position setting:
Bit(s) Description (Table 00055)
7-2 reserved (0)
1-0 position
00 center
01 top
10 bottom
11 reserved
SeeAlso: #00054,#00056
--------V-101E03----------------------------INT 10 - VIDEO - FLAT-PANEL - VERTICAL EXPANSION FOR TEXT/GRAPHICS MODES
AX = 1E03h
BH = function
bit 7: =1 set vertical expansion, =0 query expansion
bits 6-0: reserved (0)
---if BH bit 7 set--BL = new vertical expansion setting (see #00056)
Return: AL = 1Eh if function supported
BH = results
bit 7: query/set (copied from input)
bits 6-4: reserved (0)
bit 3: vertical expansion of text is supported by hardware
bit 2: vertical expansion of graphics is supported by hardware
bit 1: hardware supports independent control of expansion in
text and graphics modes
bit 0: set operation was successful (always clear on get)
-105-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
BL = active vertical expansion setting (see #00056)
SeeAlso: AX=1E00h,AX=1E02h.AX=1E04h
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Bitfields for Flat-Panel vertical expansion setting:
Bit(s) Description (Table 00056)
7-2 reserved (0)
1 vertical expansion turned on for text modes
0 vertical expansion turned on for graphics modes
SeeAlso: #00054,#00055,#00057
--------V-101E04----------------------------INT 10 - VIDEO - FLAT-PANEL - NORMAL/REVERSE VIDEO FOR TEXT/GRAPHICS MODES
AX = 1E04h
BH = function
bit 7: =1 set normal/reverse video, =0 query normal/reverse
bits 6-0: reserved (0)
---if BH bit 7 set--BL = new normal/reverse video setting (see #00057)
Return: AL = 1Eh if function supported
BH = results
bit 7: query/set (copied from input)
bits 6-4: reserved (0)
bit 3: hardware supports reverse video for text modes
bit 2: hardware supports reverse video for graphics modes
bit 1: hardware supports independent control of reverse video
in text and graphics modes
bit 0: set operation was successful (always clear on get)
BL = active normal/reverse video setting (see #00057)
SeeAlso: AX=1E00h,AX=1E03h,AX=1E05h
Bitfields for Flat-Panel normal/reverse video setting:
Bit(s) Description (Table 00057)
7-2 reserved (0)
1 reverse video for text
0 reverse video for graphics
SeeAlso: #00054,#00056,#00058,#00059
--------V-101E05----------------------------INT 10 - VIDEO - FLAT-PANEL - BRIGHTNESS CONTROL
AX = 1E05h
BH = function
bit 7: =1 set brightness, =0 query brightness
bits 6-0: reserved (0)
-106-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
---if BH bit 7 set--BL = new brightness setting (see #00058)
Return: AL = 1Eh if function supported
BH = results
bit 7: query/set (copied from input)
bits 6-2: reserved (0)
bit 1: software brightness control is supported
bit 0: set operation was successful (always clear on get)
BL = active brightness setting (see #00058)
Note: this function operates independently of AX=1E07h
SeeAlso: AX=1E00h,AX=1E04h,AX=1E06h,AX=1E07h
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Bitfields for Flat-Panel brightness control:
Bit(s) Description (Table 00058)
7-1 reserved (0)
0 high brightness
SeeAlso: #00057,#00059
--------V-101E06----------------------------INT 10 - VIDEO - FLAT-PANEL - CONTRAST CONTROL FOR TEXT/GRAPHICS
AX = 1E06h
BH = function
bit 7: =1 set contrast control, =0 query contrast
bits 6-0: reserved (0)
---if BH bit 7 set--BL = new normal/reverse video setting (see #00059)
Return: AL = 1Eh if function supported
BH = results
bit 7: query/set (copied from input)
bits 6-4: reserved (0)
bit 3: software contrast control supported for text
bit 2: software contrast control supported for graphics
bit 1: hardware supports independent control of contrast
in text and graphics modes
bit 0: set operation was successful (always clear on get)
BL = active contrast setting (see #00059)
Note: this function operates independently of AX=1E08h
SeeAlso: AX=1E00h,AX=1E04h,AX=1E05h,AX=1E07h,AX=1E08h
Bitfields for Flat-Panel contrast control:
Bit(s) Description (Table 00059)
7-2 reserved (0)
-107-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
1 high contrast for text
0 high contrast for graphics
SeeAlso: #00057,#00058
--------V-101E07----------------------------INT 10 - VIDEO - FLAT-PANEL - BRIGHTNESS SETTING
AX = 1E07h
BH = function
bit 7: =1 set brightness control, =0 query brightness
bit 6: use standard brightness
bits 5-0: reserved (0)
---if BH bits 7,6=10--BL = brightness (00h = minimum, FFh = maximum)
Return: AL = 1Eh if function supported
BH = results
bit 7: query/set (copied from input)
bit 6: standard/custom (copied from input)
bits 5-2: reserved (0)
bit 1: software brightness control is supported
bit 0: set operation was succesful (always clear on get)
BL = brightness (00h = minimum, FFh = maximum)
Note: this function operates independently of AX=1E05h
SeeAlso: AX=1E00h,AX=1E05h,AX=1E08h
--------V-101E08----------------------------INT 10 - VIDEO - FLAT-PANEL - CONTRAST SETTING
AX = 1E08h
BH = function
bit 7: =1 set contrast control, =0 query contrast
bit 6: use standard contrast
bits 5-0: reserved (0)
---if BH bits 7,6=10--BL = contrast (00h = minimum, FFh = maximum)
Return: AL = 1Eh if function supported
BH = results
bit 7: query/set (copied from input)
bit 6: standard/custom (copied from input)
bits 5-2: reserved (0)
bit 1: software contrast control is supported
bit 0: set operation was succesful (always clear on get)
BL = contrast (00h = minimum, FFh = maximum)
Note: this function operates independently of AX=1E06h
SeeAlso: AX=1E00h,AX=1E06h,AX=1E07h
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
-108-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
--------V-101EFE----------------------------INT 10 - VIDEO - FLAT-PANEL - FUNCTION SUPPORT FLAG
AX = 1EFEh
ES:DI -> DWORD buffer for bitmap of supported functions
(set to all zeros before calling)
Return: ES:DI buffer updated with mask of supported functions
Index: installation check;flat-panel display support
SeeAlso: AX=1E00h,AX=1E06h
--------V-101F00----------------------------INT 10 - VIDEO - XGA - GET DMQS (Display Mode Query and Set) DATA LENGTH
AX = 1F00h
Return: AL = 1Fh if supported
BX = number of bytes of DMQS data
Note: not supported on the original IBM XGA, only on XGA-NI (non-interlaced)
and later models.
SeeAlso: AX=1F01h
--------V-101F01----------------------------INT 10 - VIDEO - XGA - READ DMQS DATA
AX = 1F01h
ES:DI -> user buffer for return data (call AX=1F00h for size)
Return: AL = 1Fh if function supported
user buffer filled with DMQS data (see #00060)
Note: not supported on the original IBM XGA, only on XGA-NI (non-interlaced)
and later models.
SeeAlso: AH=1Bh,AX=1F00h,AX=3000h
Format of XGA DMQS buffer:
Offset Size Description (Table 00060)
00h WORD offset (in bytes) to DMQS data for next XGA instance
02h BYTE slot number
03h BYTE XGA implementation function level identifier
04h BYTE XGA implementation resolution level identifier
05h WORD vendor identifier - identifies card vendor
07h WORD vendor defined field
09h WORD XGA adapter I/O register base address
0Bh WORD XGA coprocessor register base address
(paragraph--multiply by 10h to get physical address)
0Dh WORD 1 Megabyte system video memory aperture
0000h if not allocated
(Multiply by 100000h to get physical address)
0Fh WORD 4 Megabyte system video memory aperture
-109-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
0000h if not allocated
(multiply by 100000h to get physical address)
11h WORD video memory base address
(multiply by 100000h to get physical address)
13h WORD composite ID of the attached display
15h BYTE amount of video memory available, in multiples of 256K bytes
16h DWORD alternate XGA coprocessor register base address. 0 = none.
1Ah var DMQS Data for further XGA Instances (as above)
Note: "Instances" refers to the capability of having up to 8 XGA
adapters in one computer.
SeeAlso: #00061
--------V-101F02----------------------------INT 10 - VIDEO - XGA - GET SVGA DMQS DATA LENGTH
AX = 1F02h
Return: AL = 1Fh if function supported
BX = length of SVGA DMQS data in bytes
SeeAlso: AX=1F00h,AX=1F03h
--------V-101F03----------------------------INT 10 - VIDEO - XGA - GET SVGA DMQS DATA
AX = 1F03h
ES:DI -> buffer for SVGA DMQS data (see #00061)
Return: AL = 1Fh if function supported
ES:DI buffer filled
SeeAlso: AX=1F00h,AX=1F02h
D:\D\inter61a\INTERRUP.A
Format of SVGA DMQS data:
Offset Size Description (Table 00061)
00h WORD offset to DMQS data for next SVGA instance or 0000h
02h BYTE reserved
03h BYTE SVGA implementation functional level
04h BYTE SVGA implementation resolution level
05h WORD vendor ID
07h WORD vendor-specific
09h 7 BYTEs reserved
10h BYTE SVGA linear address window size
00h 64K
01h 1M
02h 2M
03h 4M
11h WORD SVGA linear address window location or 0000h if not allocated
(multiply by 10000h [shift left 16 bits] to get physical addr)
-110-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
13h WORD attached monitor's composite monitor ID
15h BYTE available video RAM in multiples of 256K
16h 11 BYTEs reserved
SeeAlso: #00060
--------V-103000CX0000----------------------INT 10 - VIDEO - LOCATE 3270PC CONFIGURATION TABLE (INSTALLATION CHECK)
AX = 3000h
CX = 0000h
DX = 0000h
Return: CX:DX -> 3270PC configuration table (see #00062)
CX:DX = 0000h:0000h if 3270PC Control Program not active
SeeAlso: AX=1F01h
D:\D\inter61a\INTERRUP.A
Format of 3270 PC configuration table:
Offset Size Description (Table 00062)
00h BYTE aspect ratio X
01h BYTE aspect ratio Y
02h BYTE monitor type (see #00063)
03h BYTE reserved
04h BYTE adapter ID
00h = 5151/5272 adapter
04h = 5151/5272 with XGA adapter
30h = 3295 or 3270PC G/GX adapter
05h BYTE reserved
06h BYTE function flags 1 (see #00064)
07h BYTE function flags 2
bit 6: GPI graphics supported
08h WORD segment address of Control Program Level table (see #00065)
0Ah 10 BYTEs reserved
(Table 00063)
Values for 3270 PC monitor type:
00h 5151 (mono) or 5272 (color)
01h 3295
02h 5151 or 5272 with XGA (???) graphics adapter
03h 5279 with 3270PC G adapter
04h 5379 model C01 with 3270PC GX adapter
05h 5379 model M01 with 3270PC GX adapter
07h non-3270PC with 3270 Workstation Program
FFh 3270PC Control Program not loaded
-111-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
Bitfields for 3270 PC function flags 1:
Bit(s) Description (Table 00064)
7 mono text, 1 page
6 color text, 1 page
5 color text, 4 pages
4 CGA color graphics
3 720x350 two-color graphics
2 360x350 four-color graphics
1 720x350 eight-color graphics
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Format of Control Program Level table:
Offset Size Description (Table 00065)
00h WORD program version
02xxh = 3270PC Control Program v2.xx
03xxh = 3270PC Control Program v3.xx
04xxh = 3270 Workstation Program v1.xx
02h BYTE Control Program ID (00h)
03h 27 BYTEs Control Program Descriptor ("IBM 3270 PC CONTROL PROGRAM")
--------a-103800----------------------------INT 10 - Tinytalk Personal v1.09f+ - GET CONFIGURATION INFO
AX = 3800h
Return: ES:DI -> configuration info (see #00066)
Program: Tinytalk is a shareware screen reader by OMS Development/Eric Bohlman
Notes: this call is also used as the installation check by verifying that the
returned ES:DI points at valid configuration info
Tinytalk v1.09f ignores AL and always returns the configuration info;
v1.10 adds several subfunctions selected with AL
SeeAlso: AX=3801h,AX=3803h,AX=3806h,AH=39h,INT 14/AX=F0F1h
SeeAlso: INT 2F/AX=FB00h"AutoBraille"
Index: installation check;Tinytalk Personal
Format of Tinytalk Personal configuration info:
Offset Size Description (Table 00066)
00h 8 BYTEs signature "TTCONFIG"
08h WORD size of configuration data, not counting signature, this WORD,
or the following byte
0Ah BYTE ???
0Bh ??? configuration data
--------a-103801----------------------------INT 10 - Tinytalk Personal v1.10 - ???
AX = 3801h
-112-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
DL = ???
Return: ???
SeeAlso: AX=3800h,AX=3802h
--------a-103802----------------------------INT 10 - Tinytalk Personal v1.10 - ???
AX = 3802h
DL = ???
Return: ???
SeeAlso: AX=3800h,AX=3801h
--------a-103803----------------------------INT 10 - Tinytalk Personal v1.10 - GET ???
AX = 3803h
Return: AL = ???
SeeAlso: AX=3800h,AX=3804h,AX=3805h
--------a-103804----------------------------INT 10 - Tinytalk Personal v1.10 - GET ???
AX = 3804h
Return: AX = ???
SeeAlso: AX=3800h,AX=3803h,AX=3805h
--------a-103805----------------------------INT 10 - Tinytalk Personal v1.10 - GET ???
AX = 3805h
Return: AL = ???
SeeAlso: AX=3800h,AX=3803h,AX=3804h
--------a-103806----------------------------INT 10 - Tinytalk Personal v1.10 - ???
AX = 3806h
ES:DX -> ASCIZ ???
Return: ???
SeeAlso: AX=3800h
--------a-1039------------------------------INT 10 - Tinytalk Personal v1.10 - ???
AH = 39h
Program: Tinytalk is a shareware screen reader by OMS Development/Eric Bohlman
Note: this function was a NOP in TTDEMO.EXE, but may be implemented in other
variants of Tinytalk
--------V-1040------------------------------INT 10 - VIDEO - Hercules GRAFIX - "GMODE" - SET GRAPHICS MODE
AH = 40h
Return: nothing
Program: Hercules GRAFIX (or GRAPH X, as it is called in some documentation)
D:\D\inter61a\INTERRUP.A
-113-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
provides text output in graphics mode and some graphics primitives
on the Hercules Graphics Card
Desc: switch the Hercules Graphics Card into graphics mode (720x348) without
clearing the screen; make Page 0 the default for both writing and
display, and set LEVEL (see AH=44h) to 01h
SeeAlso: AH=00h,AH=41h,AH=42h
Index: video modes;Hercules
--------V-1041------------------------------INT 10 - VIDEO - Hercules GRAFIX - "TMODE" - SET TEXT MODE
AH = 41h
Return: nothing
Desc: switch the Hercules Graphics Card into text mode
SeeAlso: AH=00h,AH=40h
Index: video modes;Hercules
--------V-1042------------------------------INT 10 - VIDEO - Hercules GRAFIX - "CLRSCR" - CLEAR CURRENT PAGE
AH = 42h
Return: nothing
SeeAlso: AH=45h
--------V-1043------------------------------INT 10 - VIDEO - Hercules GRAFIX - "GPAGE" - SELECT DRAWING PAGE
AH = 43h
AL = page number (0,1)
Return: nothing
Desc: specify which of the two pages of video memory is to be used for
output
SeeAlso: AH=05h,AH=44h,AH=45h
--------V-1044------------------------------INT 10 - VIDEO - Hercules GRAFIX - "LEVEL" - SELECT DRAWING FUNCTION
AH = 44h
AL = drawing function
00h clear pixels
01h set pixels
02h invert pixels
Return: nothing
Desc: specify how graphics output will change the display
SeeAlso: AH=40h,AH=45h,AH=46h,AH=4Bh,AH=4Ch,AH=4Dh
--------V-1045------------------------------INT 10 - VIDEO - Hercules GRAFIX - "DISP" - SELECT PAGE TO DISPLAY
AH = 45h
AL = page number (0,1)
D:\D\inter61a\INTERRUP.A
-114-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Return: nothing
Desc: specify which of the two pages of video memory is visible on screen
SeeAlso: AH=05h,AH=42h,AH=43h
--------V-1046------------------------------INT 10 - VIDEO - Hercules GRAFIX - "PLOT" - DRAW ONE PIXEL
AH = 46h
DI = x (0-719)
BP = y (0-347)
Return: nothing
Notes: function 44h determines operation and function 43h which page to use
if the indicated coordinate is invalid, this function does nothing
SeeAlso: AH=0Ch,AH=47h,AH=49h,AH=4Ch,AH=4Dh
--------V-1047------------------------------INT 10 - VIDEO - Hercules GRAFIX - "GETPT" - FIND PIXEL VALUE
AH = 47h
DI = x (0-719)
BP = y (0-347)
Return: AL = 00h pixel clear
AL = 01h pixel set
Note: function 43h specifies which page is used
SeeAlso: AH=0Dh,AH=46h
--------V-1048------------------------------INT 10 - VIDEO - Hercules GRAFIX - "MOVE" - MOVE TO POINT
AH = 48h
DI = x (0-719)
BP = y (0-347)
Return: nothing
Desc: specify the location from which to start the next graphics output
SeeAlso: AH=49h
--------V-1049------------------------------INT 10 - VIDEO - Hercules GRAFIX - "DLINE" - DRAW TO POINT
AH = 49h
DI = x (0-719)
BP = y (0-347)
Return: nothing
Note: function 48h or 49h specify first point, 44h operation and 43h page to
use
SeeAlso: AH=43h,AH=44h,AH=48h,AH=4Ch,AH=4Dh
--------V-104A------------------------------INT 10 - VIDEO - Hercules GRAFIX - "BLKFIL" - BLOCK FILL
AH = 4Ah
-115-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
DI = x coordinate of lower left corner
BP = y coordinate of lower left corner
BX = height in pixels
CX = width in pixels
Return: nothing
Desc: draw a solid rectangle of the specified size at the given location
SeeAlso: AH=4Eh
--------V-104B------------------------------INT 10 - VIDEO - Hercules GRAFIX - "TEXT" - DISPLAY CHARACTER
AH = 4Bh
AL = character to display
DI = x (0-719)
BP = y (0-347)
Return: nothing
Notes: unlike the other BIOS character functions character position is
specified in pixels rather than rows and columns
the character is writting using the drawing function last specified by
AH=44h
SeeAlso: AH=09h,AH=0Ah,AH=44h
--------P-104B------------------------------INT 10 - FRIEZE - API
AH = 4Bh
CL = function
00h (v6.x-) print window
AL = mode
00h character
01h normal
02h sideways
01h load window
ES:BX -> ASCIZ filename from which to read
02h save window
ES:BX -> ASCIZ filename to which to write
03h set print width
AL = width in 1/4 inches
04h set print height
AL = height in 1/4 inches
05h reserved
06h set left margin
AL = printout margin in 1/4 inches
07h set window size
ES:BX -> four-WORD structure with Xmin, Ymin, Xmax, Ymax
D:\D\inter61a\INTERRUP.A
-116-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
08h reserved
09h set patterns
ES:BX -> 16-BYTE vector of screen->printer color correspondnces
0Ah get patterns
ES:BX -> 16-BYTE buffer for color correspondences
0Bh set mode
AL = mode
0Ch (v7.41) ???
AL = ???
00h ??? (calls original INT 05)
else ???
0Dh (v7.41) ???
AL = ???
00h ??? (calls original INT 05)
else ???
0Eh (v7.41) ???
???
0Fh get window
ES:BX -> four-WORD buffer for Xmin, Ymin, Xmax, Ymax
10h set print options
ES:BX -> printer options in same format as FRIEZE cmdline
11h initialize
ES:BX -> three-WORD array from CARDS.DAT for HRes, VRes, code
12h (v7.41) ???
???
13h (v7.41) ???
???
14h get version
Return: AH = major version (00h if FRIEZE version before 7)
AL = minor version
15h set parameters
ES:BX -> parameter table (see #00068)
16h get parameters
ES:BX -> buffer for parameter table (see #00068)
17h get printer resolution
ES:BX -> 12-WORD table for six horizontal/vertical resol pairs
18h (v8.0 only) reserved
50h (v7.41) get ???
Return: AX = ???
51h (v7.41) get ???
Return: ES = ??? (seen 2348h)
D:\D\inter61a\INTERRUP.A
-117-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
AX = ??? (seen 8432h)
Return: AX = status (see #00067)
SeeAlso: AH=0Fh/SI=F123h
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00067)
Values for FRIEZE function status:
00h successful
01h user aborted printout with ESC
02h reserved
03h file read error
04h file write error or printer error
05h file not found
06h invalid header (not an image or wrong screen mode) or can't create file
07h file close error
08h disk error
09h (v7.0+) printer error
0Ah invalid function
0Bh (v7.0+) can't create file
0Ch (v7.0+) wrong video mode
Format of FRIEZE parameter table:
Offset Size Description (Table 00068)
00h WORD top margin (1/100 inch)
02h WORD left margin (1/100 inch)
04h WORD horizontal size (1/100 inch)
06h WORD vertical size (1/100 inch)
08h WORD quality/draft mode
00h draft mode
01h quality mode
02h use horizontal/vertical resolution for output resolution
0Ah WORD printer horizontal resolution (dots per inch)
0Ch WORD printer vertical resolution (dots per inch)
0Eh WORD reserved (FFFFh)
Note: any field which should remain unchanged may be filled with FFFFh
--------V-104C------------------------------INT 10 - VIDEO - Hercules GRAFIX - "ARC" - DRAW ARC
AH = 4Ch
AL = quadrant (1 = upper right, 2 = upper left, etc)
DI = x coordinate of center
BP = y coordinate of center
BX = radius
-118-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Return: nothing
SeeAlso: AH=49h,AH=4Dh
--------V-104D------------------------------INT 10 - VIDEO - Hercules GRAFIX - "CIRC" - DRAW CIRCLE
AH = 4Dh
DI = x of center
BP = y of center
BX = radius
Return: nothing
SeeAlso: AH=49h,AH=4Ch
--------V-104E------------------------------INT 10 - VIDEO - Hercules GRAFIX - "FILL" - FILL AREA
AH = 4Eh
DI = x coordinate of an interior point
BP = y coordinate of an interior point
Return: nothing
Desc: fill a convex polygonal area bounded by a contiguous line of the
opposite color with the border color
Note: the first fill makes the figure solid, the second erases it
SeeAlso: AH=4Ah
--------V-104E00----------------------------INT 10 - VESA XGA BIOS Extensions - GET XGA ENVIRONMENT INFORMATION
AX = 4E00h
ES:DI -> 256-byte buffer for XGA information (see #00069)
Return: AL = 4Eh if function supported
AH = status
00h successful
else error code
Desc: determine whether VESA XGA extensions are present and the capabilities
supported by the display adapter
SeeAlso: AX=4E01h,AX=4E02h,AX=4F00h
Index: installation check;VESA XGA
Format of XGA information buffer:
Offset Size Description (Table 00069)
00h 4 BYTEs signature ("VESA")
04h WORD VESA version number
06h DWORD pointer to ASCIZ OEM string
0Ah DWORD environment flags (see #00070)
0Eh WORD number of XGA adapters installed (other VESA XGA functions
require a handle indicating which adapter to use)
-119-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
10h 240 BYTEs
reserved
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Bitfields for XGA environment flags:
Bit(s) Description (Table 00070)
0-1 system bus (00 = MCA, 01 = ISA, 10 = EISA)
2 bus mastering available
3-31 reserved
--------V-104E01---------------------------INT 10 - VESA XGA BIOS Extensions - RETURN XGA SUBSYSTEM INFORMATION
AX = 4E01h
DX = XGA handle (0 to number of XGAs-1)
ES:DI -> 256-byte buffer for subsystem information (see #00071)
Return: AL = 4Eh if function supported
AH = status
00h function successful
else error code
SeeAlso: AX=4E00h,AX=4E02h
Format of XGA subsystem information:
Offset Size Description (Table 00071)
00h DWORD pointer to null-terminated board OEM string
04h DWORD capabilities (see #00072)
08h DWORD pointer to 8KB XGA ROM (or NULL)
0Ch DWORD pointer to the XGA memory mapped registers
10h WORD base address of XGA I/O registers (21x0h)
12h DWORD pointer to start of physical video memory
(A000h:0000h or B000h:0000h)
16h DWORD physical address of 4MB aperture (or NULL if none)
1Ah DWORD physical address of 1MB aperture (or NULL if none)
1Eh DWORD physical address of 64KB aperture (or NULL if not enabled)
22h DWORD physical address of OEM aperture (or NULL if none)
26h WORD size of OEM aperture in 64KByte units
28h DWORD pointer to list of video modes
The list is a series of WORDs terminated by FFFFh
2Ch WORD number of 64KB blocks on the board
2Eh DWORD XGA manufacturer ID
byte 0 POS data index 1
byte 1 is index 2
byte 2 is 21xAh index 75h
32h 206 BYTEs reserved
-120-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Bitfields for XGA capabilities:
Bit(s) Description (Table 00072)
0-1 board bus architecture: 0=MCA, 1=ISA, 3=EISA
2-3 reserved
4-6 DMA Channel assigned for acquiring bus mastership (only for ISA bus)
7 DMA Channel Status (ISA only). enabled if set
8-31 reserved
--------V-104E02----------------------------------INT 10 - VESA XGA BIOS Extensions - RETURN XGA MODE INFORMATION
AX = 4E02h
CX = Video mode
DX = XGA handle
ES:DI -> 256 byte buffer for mode information (see #00073)
Return: AL = 4Eh if function supported
AH = status
00h function successful
else error code
SeeAlso: AX=4E00h,AX=4E01h
Format of XGA mode information:
Offset Size Description (Table 00073)
00h WORD attributes of the mode (see #00074)
02h WORD bytes per logical scanline
04h WORD horizontal resolution in pixels
06h WORD vertical resolution in scanlines
08h BYTE character Width in pixels
09h BYTE character Height in pixels
0Ah BYTE number of planes
0Bh BYTE bits per pixels
0Ch BYTE memory model (see #00075)
0Dh BYTE number of Image Pages
0Eh BYTE number of Red bits
0Fh BYTE bit position of Red bit field
10h BYTE number of Green bits
11h BYTE bit position of Green bit field
12h BYTE number of Blue bits
13h BYTE bit position of Blue bit field
14h BYTE number of Reserved bits
15h BYTE bit position of Reserved bit field
16h 235 BYTEs reserved
-121-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Bitfields for XGA mode attributes:
Bit(s) Description (Table 00074)
0 set if mode is supported
1 reserved
2 output is supported by the BIOS
3 reserved
4 if set this is a graphics mode (VGA registers inactive, XGA active),
if clear this is a text mode (VGA registers active, XGA inactive)
(Table 00075)
Values for XGA video memory model:
00h Text Mode
01h CGA graphics
02h Hercules graphics
03h 4-planar graphics
04h Packed Pixel
05h Non-chain 4, 256 color
06h Direct Color
07h YUV-24
--------V-104E03----------------------------------INT 10 - VESA XGA BIOS Extensions - SET XGA VIDEO MODE
AX = 4E03h
BX = video mode
CX = other command flags
bit 0 If clear the feature connector is set to the default state
DX = XGA handle
ES:DI -> 256 byte buffer
Return: AL = 4Eh if function supported
AH = status
00h function successful
else error code
SeeAlso: AH=00h,AX=4E04h,AX=4F02h
--------V-104E04----------------------------------INT 10 - VESA XGA BIOS Extensions - RETURN CURRENT VIDEO MODE
AX = 4E04h
DX = XGA handle
Return: AL = 4Eh if function supported
AH = status
00h function successful
BX??? = current mode
else error code
-122-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
SeeAlso: AH=0Fh,AX=4E03h,AX=4F03h
--------V-104E05----------------------------------INT 10 - VESA XGA BIOS Extensions - SET FEATURE CONNECTOR STATE
AX = 4E05h
BX = Feature Connector State (see #00076)
DX = XGA handle
Return: AL = 4Eh if function supported
AH = status
00h function successful
else error code
SeeAlso: AX=4E00h,AX=4E06h
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Bitfields for XGA Feature Connector State:
Bit(s) Description (Table 00076)
0 Feature Connector is enabled
1 Feature Connector is in Output Mode rather than Input Mode
2-15 reserved (0)
--------V-104E06----------------------------------INT 10 - VESA XGA BIOS Extensions - RETURN FEATURE CONNECTOR STATE
AX = 4E06h
DX = XGA handle
Return: AL = 4Eh if function supported
AH = status
00h function successful
else error code
BX = Feature Connector State (see #00076)
SeeAlso: AX=4E00h,AX=4E05h
--------V-104F00----------------------------INT 10 - VESA SuperVGA BIOS (VBE) - GET SuperVGA INFORMATION
AX = 4F00h
ES:DI -> buffer for SuperVGA information (see #00077)
Return: AL = 4Fh if function supported
AH = status
00h successful
ES:DI buffer filled
01h failed
---VBE v2.0--02h function not supported by current hardware configuration
03h function invalid in current video mode
Desc: determine whether VESA BIOS extensions are present and the capabilities
supported by the display adapter
-123-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
SeeAlso: AX=4E00h,AX=4F01h,AX=7F00h"SOLLEX",AX=A00Ch
Index: installation check;VESA SuperVGA
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Format of SuperVGA information:
Offset Size Description (Table 00077)
00h 4 BYTEs (ret) signature ("VESA")
(call) VESA 2.0 request signature ("VBE2"), required to receive
version 2.0 info
04h WORD VESA version number (one-digit minor version -- 0102h = v1.2)
06h DWORD pointer to OEM name
"761295520" for ATI
0Ah DWORD capabilities flags (see #00078)
0Eh DWORD pointer to list of supported VESA and OEM video modes
(list of words terminated with FFFFh)
12h WORD total amount of video memory in 64K blocks
---VBE v1.x --14h 236 BYTEs reserved
---VBE v2.0 --14h WORD OEM software version (BCD, high byte = major, low byte = minor)
16h DWORD pointer to vendor name
1Ah DWORD pointer to product name
1Eh DWORD pointer to product revision string
22h WORD (if capabilities bit 3 set) VBE/AF version (BCD)
0100h for v1.0P
24h DWORD (if capabilities bit 3 set) pointer to list of supported
accelerated video modes (list of words terminated with FFFFh)
28h 216 BYTEs reserved for VBE implementation
100h 256 BYTEs OEM scratchpad (for OEM strings, etc.)
Notes: the list of supported video modes is stored in the reserved portion of
the SuperVGA information record by some implementations, and it may
thus be necessary to either copy the mode list or use a different
buffer for all subsequent VESA calls
not all of the video modes in the list of mode numbers may be
supported, e.g. if they require more memory than currently installed
or are not supported by the attached monitor. Check any mode you
intend to use through AX=4F01h first.
the 1.1 VESA document specifies 242 reserved bytes at the end, so the
buffer should be 262 bytes to ensure that it is not overrun; for
v2.0, the buffer should be 512 bytes
the S3 specific video modes will most likely follow the FFFFh
terminator at the end of the standard modes. A search must then
-124-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
be made to find them, FFFFh will also terminate this second list
in some cases, only a "stub" VBE may be present, supporting only
AX=4F00h; this case may be assumed if the list of supported video
modes is empty (consisting of a single word of FFFFh)
D:\D\inter61a\INTERRUP.A
Bitfields for VESA capabilities:
Bit(s) Description (Table 00078)
0 DAC can be switched into 8-bit mode
1 non-VGA controller
2 programmed DAC with blank bit (i.e. only during blanking interval)
3 (VBE v3.0) controller supports hardware stereoscopic signalling
3 controller supports VBE/AF v1.0P extensions
4 (VBE v3.0) if bit 3 set:
=0 stereo signalling via external VESA stereo connector
=1 stereo signalling via VESA EVC connector
4 (VBE/AF v1.0P) must call EnableDirectAccess to access framebuffer
5 (VBE/AF v1.0P) controller supports hardware mouse cursor
6 (VBE/AF v1.0P) controller supports hardware clipping
7 (VBE/AF v1.0P) controller supports transparent BitBLT
8-31 reserved (0)
SeeAlso: #00077,AX=4F09h
--------V-104F01----------------------------INT 10 - VESA SuperVGA BIOS - GET SuperVGA MODE INFORMATION
AX = 4F01h
CX = SuperVGA video mode (see #04082 for bitfields)
ES:DI -> 256-byte buffer for mode information (see #00079)
Return: AL = 4Fh if function supported
AH = status
00h successful
ES:DI buffer filled
01h failed
Desc: determine the attributes of the specified video mode
SeeAlso: AX=4F00h,AX=4F02h
Bitfields for VESA/VBE video mode number:
Bit(s) Description (Table 04082)
15 preserve display memory on mode change
14 (VBE v2.0+) use linear (flat) frame buffer
13 (VBE/AF 1.0P) VBE/AF initializes accelerator hardware
12 reserved for VBE/AF
11 (VBE v3.0) user user-specified CRTC refresh rate values
-125-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
10-9 reserved for future expansion
8-0 video mode number (0xxh are non-VESA modes, 1xxh are VESA-defined)
D:\D\inter61a\INTERRUP.A
Format of VESA SuperVGA mode information:
Offset Size Description (Table 00079)
00h WORD mode attributes (see #00080)
02h BYTE window attributes, window A (see #00081)
03h BYTE window attributes, window B (see #00081)
04h WORD window granularity in KB
06h WORD window size in KB
08h WORD start segment of window A (0000h if not supported)
0Ah WORD start segment of window B (0000h if not supported)
0Ch DWORD -> FAR window positioning function (equivalent to AX=4F05h)
10h WORD bytes per scan line
---remainder is optional for VESA modes in v1.0/1.1, needed for OEM modes--12h WORD width in pixels (graphics) or characters (text)
14h WORD height in pixels (graphics) or characters (text)
16h BYTE width of character cell in pixels
17h BYTE height of character cell in pixels
18h BYTE number of memory planes
19h BYTE number of bits per pixel
1Ah BYTE number of banks
1Bh BYTE memory model type (see #00082)
1Ch BYTE size of bank in KB
1Dh BYTE number of image pages (less one) that will fit in video RAM
1Eh BYTE reserved (00h for VBE 1.0-2.0, 01h for VBE 3.0)
---VBE v1.2+ --1Fh BYTE red mask size
20h BYTE red field position
21h BYTE green mask size
22h BYTE green field size
23h BYTE blue mask size
24h BYTE blue field size
25h BYTE reserved mask size
26h BYTE reserved mask position
27h BYTE direct color mode info
bit 0: color ramp is programmable
bit 1: bytes in reserved field may be used by application
---VBE v2.0+ --28h DWORD physical address of linear video buffer
2Ch DWORD pointer to start of offscreen memory
-126-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
30h WORD KB of offscreen memory
---VBE v3.0 --32h WORD bytes per scan line in linear modes
34h BYTE number of images (less one) for banked video modes
35h BYTE number of images (less one) for linear video modes
36h BYTE linear modes: size of direct color red mask (in bits)
37h BYTE linear modes: bit position of red mask LSB (e.g. shift count)
38h BYTE linear modes: size of direct color green mask (in bits)
39h BYTE linear modes: bit position of green mask LSB (e.g. shift count)
3Ah BYTE linear modes: size of direct color blue mask (in bits)
3Bh BYTE linear modes: bit position of blue mask LSB (e.g. shift count)
3Ch BYTE linear modes: size of direct color reserved mask (in bits)
3Dh BYTE linear modes: bit position of reserved mask LSB
3Eh DWORD maximum pixel clock for graphics video mode, in Hz
42h 190 BYTEs reserved (0)
Note: while VBE 1.1 and higher will zero out all unused bytes of the buffer,
v1.0 did not, so applications that want to be backward compatible
should clear the buffer before calling
D:\D\inter61a\INTERRUP.A
Bitfields for VESA SuperVGA mode attributes:
Bit(s) Description (Table 00080)
0 mode supported by present hardware configuration
1 optional information available (must be =1 for VBE v1.2+)
2 BIOS output supported
3 set if color, clear if monochrome
4 set if graphics mode, clear if text mode
---VBE v2.0+ --5 mode is not VGA-compatible
6 bank-switched mode not supported
7 linear framebuffer mode supported
8 double-scan mode available (e.g. 320x200 and 320x240)
---VBE v3.0 --9 interlaced mode available
10 hardware supports triple buffering
11 hardware supports stereoscopic display
12 dual display start address support
13-15 reserved
---VBE/AF v1.0P--9 application must call EnableDirectAccess before calling bank-switching
functions
SeeAlso: #00079
-127-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Bitfields for VESA SuperVGA window attributes:
Bit(s) Description (Table 00081)
0 exists
1 readable
2 writable
3-7 reserved
SeeAlso: #00079
(Table 00082)
Values for VESA SuperVGA memory model type:
00h text
01h CGA graphics
02h HGC graphics
03h 16-color (EGA) graphics
04h packed pixel graphics
05h "sequ 256" (non-chain 4) graphics
06h direct color (HiColor, 24-bit color)
07h YUV (luminance-chrominance, also called YIQ)
08h-0Fh reserved for VESA
10h-FFh OEM memory models
SeeAlso: #00079
--------V-104F02----------------------------INT 10 - VESA SuperVGA BIOS - SET SuperVGA VIDEO MODE
AX = 4F02h
BX = new video mode (see #04082,#00083,#00084)
ES:DI -> (VBE 3.0+) CRTC information block, bit mode bit 11 set
(see #04083)
Return: AL = 4Fh if function supported
AH = status
00h successful
01h failed
Notes: bit 13 may only be set if the video mode is present in the list of
accelerated video modes returned by AX=4F00h
if the DAC supports both 8 bits per primary color and 6 bits, it will
be reset to 6 bits after a mode set; use AX=4F08h to restore 8 bits
SeeAlso: AX=4E03h,AX=4F00h,AX=4F01h,AX=4F03h,AX=4F08h
(Table 00083)
Values for VESA video mode:
00h-FFh OEM video modes (see #00010 at AH=00h)
-128-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
100h 640x400x256
101h 640x480x256
102h 800x600x16
103h 800x600x256
104h 1024x768x16
105h 1024x768x256
106h 1280x1024x16
107h 1280x1024x256
108h 80x60 text
109h 132x25 text
10Ah 132x43 text
10Bh 132x50 text
10Ch 132x60 text
---VBE v1.2+ --10Dh 320x200x32K
10Eh 320x200x64K
10Fh 320x200x16M
110h 640x480x32K
111h 640x480x64K
112h 640x480x16M
113h 800x600x32K
114h 800x600x64K
115h 800x600x16M
116h 1024x768x32K
117h 1024x768x64K
118h 1024x768x16M
119h 1280x1024x32K (1:5:5:5)
11Ah 1280x1024x64K (5:6:5)
11Bh 1280x1024x16M
---VBE 2.0+ --120h 1600x1200x256
121h 1600x1200x32K
122h 1600x1200x64K
81FFh special full-memory access mode
Notes: the special mode 81FFh preserves the contents of the video memory and
gives access to all of the memory; VESA recommends that the special
mode be a packed-pixel mode. For VBE 2.0+, it is required that the
VBE implement the mode, but not place it in the list of available
modes (mode information for this mode can be queried directly,
however).
as of VBE 2.0, VESA will no longer define video mode numbers
D:\D\inter61a\INTERRUP.A
-129-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
SeeAlso: #00010,#00011,#00084,#00191
Index: video modes;VESA
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00084)
Values for S3 OEM video mode:
201h 640x480x256
202h 800x600x16
203h 800x600x256
204h 1024x768x16
205h 1024x768x256
206h 1280x960x16
207h 1152x864x256 (Diamond Stealth 64)
208h 1280x1024x16
209h 1152x864x32K
20Ah 1152x864x64K (Diamond Stealth 64)
20Bh 1152x864x4G
211h 640x480x64K (Diamond Stealth 24)
211h 640x400x4G (Diamond Stealth64 Video / Stealth64 Graphics)
212h 640x480x16M (Diamond Stealth 24)
301h 640x480x32K
Note: these modes are only available on video cards using S3's VESA driver
SeeAlso: #00083,#00191,#00732 at INT 1A/AX=B102h
Index: video modes;S3
Format of VESA VBE CRTC Information Block:
Offset Size Description (Table 04083)
00h WORD total number of pixels horizontally
02h WORD horizontal sync start (in pixels)
04h WORD horizontal sync end (in pixels)
06h WORD total number of scan lines
08h WORD vertical sync start (in scan lines)
0Ah WORD vertical sync end (in scan lines)
0Ch BYTE flags (see #04084)
0Dh DWORD pixel clock, in Hz
11h WORD refresh rate, in 0.01 Hz units
this field MUST be set to pixel_clock / (HTotal * VTotal),
even though it may not actually be used by the VBE
implementation
13h 40 BYTEs reserved
Bitfields for VESA VBE CRTC Information Block flags:
-130-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
Bit(s) Description (Table 04084)
0 enable double scanning
1 enable interlacing
2 horizontal sync polarity (0 positive, 1 negative)
3 vertical sync polarity (0 positive, 1 negative)
SeeAlso: #04083
--------V-104F03----------------------------INT 10 - VESA SuperVGA BIOS - GET CURRENT VIDEO MODE
AX = 4F03h
Return: AL = 4Fh if function supported
AH = status
00h successful
BX = video mode (see #00083,#00084)
bit 13: VBE/AF v1.0P accelerated video mode
bit 14: linear frame buffer enabled (VBE v2.0+)
bit 15: don't clear video memory
01h failed
SeeAlso: AH=0Fh,AX=4E04h,AX=4F02h
--------V-104F04----------------------------INT 10 - VESA SuperVGA BIOS - SAVE/RESTORE SuperVGA VIDEO STATE
AX = 4F04h
DL = subfunction
00h get state buffer size
Return: BX = number of 64-byte blocks needed
01h save video states
ES:BX -> buffer
02h restore video states
ES:BX -> buffer
CX = states to save/restore (see #00085)
Return: AL = 4Fh if function supported
AH = status
00h successful
01h failed
SeeAlso: AH=1Ch,AX=5F90h,AX=5FA0h
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Bitfields for VESA SuperVGA states to save/restore:
Bit(s) Description (Table 00085)
0 video hardware state
1 video BIOS data state
2 video DAC state
3 SuperVGA register state
-131-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
SeeAlso: #00048,#00186
--------V-104F05----------------------------INT 10 - VESA SuperVGA BIOS - CPU VIDEO MEMORY CONTROL
AX = 4F05h
BH = subfunction
00h select video memory window
DX = window address in video memory (in granularity units)
01h get video memory window
Return: DX = window address in video memory (in gran. units)
BL = window number
00h window A
01h window B
ES = selector for memory-mapped registers (VBE 2.0+, when called from
32-bit protected mode)
Return: AL = 4Fh if function supported
AH = status
00h successful
01h failed
Note: when using an accelerated video mode under VBE/AF v1.0P, the
application must call EnableDirectAccess before switching banks if
bit 9 of the video mode attributes flag is set (see #00080)
BUG: Phoenix S3 Trio64V+ v1.02-02 reportedly returns garbage in DX for
subfunction 01h
SeeAlso: AX=4F01h,AX=4F06h,AX=4F07h,AX=7000h/BX=0004h
--------V-104F06----------------------------INT 10 - VESA SuperVGA BIOS v1.1+ - GET/SET LOGICAL SCAN LINE LENGTH (PIXELS)
AX = 4F06h
BL = subfunction
00h set scan line length
CX = desired width in pixels
01h get scan line length
Return: AL = 4Fh if function supported
AH = status
00h successful
01h failed
BX = bytes per scan line
CX = number of pixels per scan line
DX = maximum number of scan lines
Notes: if the desired width is not achievable, the next larger width will be
set
the scan line may be wider than the visible area of the screen
-132-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
this function is valid in text modes, provided that pixel values are
multiplied by the character cell width/height
SeeAlso: AX=4F01h,AX=4F05h,AX=4F06h/BL=02h,AX=4F06h/BL=03h,AX=4F07h
--------V-104F06BL02------------------------INT 10 - VESA SuperVGA BIOS v2.0+ - SET LOGICAL SCAN LINE LENGTH (BYTES)
AX = 4F06h
BL = 02h
CX = desired scanline width in bytes
Return: AL = 4Fh if function supported
AH = status
00h successful
01h failed
BX = bytes per scan line
CX = number of pixels per scan line
DX = maximum number of scan lines
Notes: if the desired width is not achievable, the next larger width will be
set
the scan line may be wider than the visible area of the screen
this function is valid in text modes, provided that pixel values are
multiplied by the character cell width/height
SeeAlso: AX=4F01h,AX=4F05h,AX=4F06h,AX=4F06h/BL=03h,AX=4F07h
--------V-104F06BL03------------------------INT 10 - VESA SuperVGA BIOS v2.0+ - GET MAXIMUM SCAN LINE LENGTH
AX = 4F06h
BL = 03h
Return: AL = 4Fh if function supported
AH = status
00h successful
01h failed
BX = maximum bytes per scan line
CX = maximum number of pixels per scan line
Notes: this function is valid in text modes, provided that pixel values are
multiplied by the character cell width/height
SeeAlso: AX=4F01h,AX=4F05h,AX=4F06h,AX=4F06h/BL=02h,AX=4F07h
--------V-104F07----------------------------INT 10 - VESA SuperVGA BIOS v1.1+ - GET/SET DISPLAY START
AX = 4F07h
BL = subfunction
00h,80h set display start
CX = leftmost displayed pixel in scan line
DX = first displayed scan line
D:\D\inter61a\INTERRUP.A
-133-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
01h get display start
Return: BH = 00h
CX = leftmost displayed pixel in scan line
DX = first displayed scan line
BH = 00h (reserved)
Return: AL = 4Fh if function supported
AH = status
00h successful
01h failed
Notes: this function is valid in text modes, provided that values are
multiplied by the character cell width/height
subfunction 80h waits until vertical retrace before changing the
display start address (VBE v2.0+)
SeeAlso: AX=4F01h,AX=4F05h,AX=4F06h
--------V-104F07----------------------------INT 10 - VESA SuperVGA BIOS v3.0+ - SCHEDULED DISPLAY START
AX = 4F07h
BL = subfunction
02h,82h (VBE v3.0) schedule display start at next vertical retrace
ECX = display start address in bytes
03h,83h schedule stereoscopic display start
ECX = left image start address (in bytes)
EDX = right image start address (in bytes)
04h get scheduled display start status
Return: CX = start status
(00h no display flip, else display has flipped)
Return: AL = 4Fh if function supported
AH = status
00h successful
01h failed
SeeAlso: AX=4F07h"DISPLAY START",AX=4F07h"STEREOSCOPIC"
--------V-104F07----------------------------INT 10 - VESA SuperVGA BIOS v3.0+ - ENABLE/DISABLE STEREOSCOPIC MODE
AX = 4F07h
BL = subfunction
05h enable stereoscopic mode
06h disable stereoscopic mode
Return: AL = 4Fh if function supported
AH = status
00h successful
01h failed
D:\D\inter61a\INTERRUP.A
-134-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Note: when stereoscopic mode is enabled, the display start address will
automatically alternate between the left and right images on every
vertical retrace
SeeAlso: AX=4F07h"DISPLAY START",AX=4F07h"SCHEDULED"
--------V-104F08----------------------------INT 10 - VESA SuperVGA BIOS v1.2+ - GET/SET DAC PALETTE CONTROL
AX = 4F08h
BL = subfunction
00h set DAC palette width
BH = desired number of bits per primary color
01h get DAC palette width
Return: AL = 4Fh if function supported
AH = status
00h successful
BH = current number of bits per primary (06h = standard VGA)
01h failed
--------V-104F09----------------------------INT 10 - VESA SuperVGA BIOS v2.0+ - GET/SET PALETTE ENTRIES
AX = 4F09h
BL = subfunction
00h set (primary) palette
01h get (primary) palette
02h set secondary palette data
03h get secondary palette data
80h set palette during vertical retrace
CX = number of entries to change
DX = starting palette index
ES:DI -> palette buffer, array of DAC entries (see #00086)
Return: AL = 4Fh if function supported
AH = status
00h successful
01h failed
SeeAlso: AX=4F0Ah,AX=D000h"S3VBE"
Format of VESA VBE palette entry:
Offset Size Description (Table 00086)
00h BYTE red
01h BYTE green
02h BYTE blue
03h BYTE alpha or alignment byte
--------V-104F0ABL00-------------------------135-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
INT 10 - VESA SuperVGA BIOS v2.0+ - GET PROTECTED-MODE INTERFACE
AX = 4F0Ah
BL = 00h
Return: AL = 4Fh if function supported
AH = status
00h successful
ES:DI -> protected-mode table (see #00087)
CX = length of table in bytes, included protected-mode code
01h failed
SeeAlso: AX=4F00h,AX=4F05h,AX=4F07h,AX=4F09h
Format of VESA VBE 2.0 protected-mode table:
Offset Size Description (Table 00087)
00h WORD offset (within table) of protected-mode code for Function 5
(Set Window)
02h WORD offset of protected-mode code for Function 7 (Set Disp Start)
04h WORD offset of protected-mode code for Function 9 (Set Primary
Palette)
06h WORD offset (within table) of list of I/O ports and memory locations
for which I/O privilege may be required in protected mode
(0000h if no list) (see #04085)
08h var code and optional port/memory list
Format of VESA VBE 2.0+ protected-mode port/memory list:
Offset Size Description (Table 04085)
00h WORD I/O port number
...
WORD FFFFh marking end of I/O port list
DWORD memory region base address
WORD memory region limit (one less than length)
WORD FFFFh marking end of memory region list
Note: the memory region is optional; if not present, there will be a word
of FFFFh immediately following the FFFFh marking the end of the I/O
port list
SeeAlso: #00087
--------V-104F0A----------------------------INT 10 O - VESA SuperVGA BIOS v2.0 beta - GET PROTECTED-MODE CODE
AX = 4F0Ah
BX = function to be copied (see #00088)
Return: AL = 4Fh if function supported
AH = status
-136-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
00h successful
CX = number of bytes to copy
ES:DI -> code for requested function
01h failed
SeeAlso: AX=4F09h,AX=D000h"S3VBE"
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00088)
Values for VESA VBE protected-mode function identifiers:
0001h set bank (see AX=4F05h)
0002h set display start (see AX=4F07h)
0003h set palette (see AX=4F09h)
--------V-104F0BBL00------------------------INT 10 - VESA SuperVGA BIOS v3.0 - GET NEAREST PIXEL CLOCK
AX = 4F0Bh
BL = 00h get closest pixel clock
ECX = requested clock frequency in Hz
DX = video mode number
Return: AL = 4Fh if function supported
AH = status
00h successful
ECX = nearest clock rate
01h failed
--------V-104F0B----------------------------INT 10 - VESA SuperVGA BIOS - GET VBE/AF v1.0P DEVICE CONTEXT BUFFER
AX = 4F0Bh
BL = subfunction
00h get length of device context buffer
01h initialize device context buffer
ES:DI -> real-mode address of buffer (see #00089)
Return: AL = 4Fh if function supported
AH = status
00h successful
CX = number of bytes required for buffer (if BL=00h on entry)
ES:DI buffer initialized (if BL=01h on entry)
01h failed
Note: this interface description is derived from the draft VBE/AF proposal
(version 1.0P, document revsion 0.12P, dated 13jan95)
SeeAlso: AX=4F00h,AX=4F01h,AX=4F17h
Format of VBE/AF v1.0P Device Context buffer:
Offset Size Description (Table 00089)
-137-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
00h WORD maximum X coordinate in frame buffer (0 = left edge)
Note: application must never pass X coordinate greater than
this value to the SetClipRect function (values are
NOT range-checked!)
02h WORD maximum Y coordinate in frame buffer (0 = top edge)
Note: application must never pass Y coordinate greater than
this value to the SetClipRect function
04h DWORD -> "SetForeColor" to set foreground color/mix (see #00091)
08h DWORD -> "SetBackColor" to set background color/mix (see #00092)
0Ch DWORD -> "SetClipRect" set hardware clipping rectangle (see #00093)
10h DWORD -> function "DrawScan" to draw a single scan line
14h DWORD -> function "DrawScanList" to draw a list of scan lines
18h DWORD -> function "DrawRect" to draw a solid rectangle
1Ch DWORD -> function "DrawLine" to draw a solid line
20h DWORD -> function "DrawPattScan" to draw a patterned scan line
24h DWORD -> function "BitBlt" to perform screen-to-screen BitBLT
28h DWORD -> "TransBitBlt" to perform transparent screen-to-screen BitBLT
2Ch DWORD -> "MonoBitBlt" to monochrome expansion screen-to-screen BitBLT
30h DWORD -> function "SetCursor" to download hardware cursor image
34h DWORD -> function "SetCursorPos" to set hardware cursor position
38h DWORD -> function "SetCursorColor" to set hardware cursor color
3Ch DWORD -> function "ShowCursor" to show/hide hardware cursor
40h DWORD -> function "WaitTillIdle" to wait until graphics engine idle
44h DWORD -> "EnableDirectAccess" to enable direct framebuffer access
48h DWORD -> "DisableDirectAccess" to disable direct framebuffer access
4Ch DWORD -> "BankSwitchCB" bank-switching callback function
(set by application, may simply point at 32-bit VBE 2.0 bank
switching entry point)
50h WORD "VidMemSel" selector for video memory (must be set by app)
52h WORD "IOPortsOff" offset of I/O ports table in context buffer
54h WORD "IOMemoryOff" offset of I/O memory table in context buffer
56h WORD "IOMemSel1" selector for first I/O memory area specified by
I/O memory table (must be set by application)
58h WORD "IOMemSel2" selector for second I/O memory area
5Ah WORD "IOMemSel3" selector for third I/O memory area
5Ch WORD "IOMemSel4" selector for fourth I/O memory area
5Eh N BYTEs device-specific state buffer
N WORDs I/O port access table (list of ports, last entry is FFFFh)
N DWORDs I/O memory access table (list of physical-address/length pairs,
last entry is FFFFFFFFh)
N BYTEs 32-bit code for VBE/AF v1.0P function
D:\D\inter61a\INTERRUP.A
-138-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Notes: all function pointers are offsets into the 32-bit code within the
context buffer, and should be updated to point at the actual
functions after the application has copied the buffer from the
real-mode memory used for the interrupt call into its own flat-model
memory space
any functions which are not supported by the hardware have function
pointers which are set to 00000000h initially
(Table 00090)
Values for VBE/AF v1.0P color mixing mode:
00h replace
01h XOR with existing pixel
02h OR with existing pixel
03h AND with existing pixel
SeeAlso: #00091,#00090
(Table 00091)
Call VBE/AF v1.0P function "SetForeColor" with:
ES:EDI -> device context buffer (see #00089)
EAX = new foreground color (format varies by video mode)
BL = new foreground mixing mode (see #00090)
SeeAlso: #00089,#00092,#00107
(Table 00092)
Call VBE/AF v1.0P function "SetbackColor" with:
ES:EDI -> device context buffer (see #00089)
EAX = new background color (format varies by video mode)
BL = new background mixing mode (see #00090)
SeeAlso: #00089,#00091,#00093
(Table 00093)
Call VBE/AF v1.0P function "SetClipRect" with:
ES:EDI -> device context buffer (see #00089)
EAX = left clipping coordinate
EBX = top clipping coordinate
ECX = right clipping coordinate
EDX = bottom clipping coordinate
SeeAlso: #00089,#00092,#00094,#00107
(Table 00094)
Call VBE/AF v1.0P function "DrawScan" with:
-139-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
ES:EDI -> device context buffer (see #00089)
EAX = X1 coordinate
EBX = Y coordinate
ECX = X2 coordinate
Desc: draw a solid horizontal line from (X1,Y) to (X2,Y) in the currentlyactive foreground color and mix, omitting the pixel at the largest
X coordinate
SeeAlso: #00089,#00093,#00095,#00098,#00107
D:\D\inter61a\INTERRUP.A
(Table 00095)
Call VBE/AF v1.0P function "DrawScanList" with:
ES:EDI -> device context buffer (see #00089)
EAX = Y coordinate of first line
EBX = length of scan list
DS:ESI -> scanline list X coordinates (2N WORDs)
Desc: draw multiple solid horizontal lines at successive Y coordinates,
using the currently-active foreground color and mix, omitting the
pixel at the largest X coordinate for each line
Note: the scanline list consists of pairs of X coordinates; because the
last pixel is omitted, a scanline will be skipped if X1==X2
SeeAlso: #00089,#00094,#00096,#00107
(Table 00096)
Call VBE/AF v1.0P function "DrawRect" with:
ES:EDI -> device context buffer (see #00089)
EAX = left coordinate
EBX = top coordinate
ECX = right coordinate
EDX = bottom coordinate
Desc: draw a solid rectangle in the currently-active foreground color and
mix, omitting the rightmost X coordinate and bottom-most scan line
Note: results are undefined if EAX>ECX or EBX>EDX; nothing will be drawn if
EAX=ECX or EBX=EDX
SeeAlso: #00089,#00094,#00095,#00097
(Table 00097)
Call VBE/AF v1.0P function "DrawLine" with:
ES:EDI -> device context buffer (see #00089)
EAX = ??? (specified this way in the draft documentation!)
EBX = ???
ECX = ???
-140-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
EDX = ???
ESI = ???
Desc: draw a solid line in the currently-active foreground color and mix,
given the Bresenham parameters
SeeAlso: #00089,#00094,#00096,#00098
D:\D\inter61a\INTERRUP.A
(Table 00098)
Call VBE/AF v1.0P function "DrawPattScan" with:
ES:EDI -> device context buffer (see #00089)
EAX = X1 coordinate
EBX = Y coordinate
ECX = X2 coordinate
DL = 8-bit stipple pattern
Desc: draw a patterned horizontal line from (X1,Y) to (X2,Y) in the
currently-active foreground color and mix, omitting the pixel at
the largest X coordinate
Note: for each pixel in the line, if DL bit (X mod 8) is set, the pixel is
drawn, and left untouched if the bit is clear
SeeAlso: #00089,#00096,#00097,#00094,#00099,#00107
(Table 00099)
Call VBE/AF v1.0P function "BitBlt" with:
ES:EDI -> device context buffer (see #00089)
DS:ESI -> BitBlt parameter block (see #00100)
BL = mix operation
00h replace
01h XOR
02h OR
03h AND
SeeAlso: #00089,#00094,#00098,#00101,#00107
Format of VBE/AF BitBlt parameter block:
Offset Size Description (Table 00100)
00h WORD left coordinate of source rectangle
02h WORD top coordinate of source rectangle
04h WORD right coordinate of source rectangle
06h WORD bottom coordinate of source rectangle
08h WORD left coordinate of destination rectangle
0Ah WORD top coordinate of destination rectangle
0Ch BYTE horizontal direction: 00h = decrement X, 01h = increment X
0Dh BYTE vertical direction: 00h = decrement Y, 01h = increment Y
-141-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Notes: the rightmost pixel(s) and bottom-most scan line are not copied
the horizontal/vertical direction flags are used to ensure correct
copies when the source and destination rectangles overlap
SeeAlso: #00099
(Table 00101)
Call VBE/AF v1.0P function "TransBitBlt" with:
ES:EDI -> device context buffer (see #00089)
DS:ESI -> BitBlt parameter block (see #00100)
BL = mix operation
00h replace
01h XOR
02h OR
03h AND
ECX = transparent color
Desc: copy a rectangular area from one location to another, treating pixels
with the specified color as transparent (leaving the destination
unchanged)
SeeAlso: #00089,#00099,#00102,#00107
(Table 00102)
Call VBE/AF v1.0P function "MonoBitBlt" with:
ES:EDI -> device context buffer (see #00089)
DS:ESI -> BitBlt parameter block (see #00100)
BL = mix operation
00h replace
01h XOR
02h OR
03h AND
BH = bit-plane from which to read
Desc: copy a rectangular area from one location to another, expanding a
single bit of each source pixel
SeeAlso: #00089,#00099,#00101
(Table 00103)
Call VBE/AF v1.0P function "SetCursor"
ES:EDI -> device context buffer (see
DS -> application's data segment
ESI -> 32x32 cursor data, in Windows
(32 DWORDs of XOR mask followed by
SeeAlso: #00089,#00094,#00104,#00105
with:
#00089)
3.1 cursor-file format
32 DWORDs of AND mask)
-142-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00104)
Call VBE/AF v1.0P function "SetCursorPos" with:
ES:EDI -> device context buffer (see #00089)
EAX = cursor X coordinate
EBX = cursor Y coordinate
CL = cursor's X hotspot
CH = cursor's Y hotspot
SeeAlso: #00089,#00103,#00105
(Table 00105)
Call VBE/AF v1.0P function "SetCursorColor" with:
ES:EDI -> device context buffer (see #00089)
AL = 8-bit color index, or color's Red value
AH = color's Green value (16-bpp, 24-bpp, 32-bpp modes)
BL = color's Blue value (16-bpp, 24-bpp, 32-bpp modes)
SeeAlso: #00089,#00103,#00104,#00106
(Table 00106)
Call VBE/AF v1.0P function "ShowCursor" with:
ES:EDI -> device context buffer (see #00089)
AL = new visibility (00h hide cursor, 01h show cursor)
SeeAlso: #00089,#00103,#00104,#00105
(Table 00107)
Call VBE/AF v1.0P function "WaitTillIdle" with:
ES:EDI -> device context buffer (see #00089)
Desc: pause until the hardware accelerator has completed all pending
operations
SeeAlso: #00089,#00108,#00109
(Table 00108)
Call VBE/AF v1.0P function "EnableDirectAccess" with:
ES:EDI -> device context buffer (see #00089)
SeeAlso: #00089,#00109,#00107,AX=4F05h,#00078,#00080
(Table 00109)
Call VBE/AF v1.0P function "DisableDirectAccess" with:
ES:EDI -> device context buffer (see #00089)
SeeAlso: #00089,#00108
--------V-104F0C-----------------------------143-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
INT 10 - VESA SuperVGA BIOS - RESERVED FOR FUTURE SVGA FUNCTIONS
AX = 4F0Ch-4F0Fh
SeeAlso: AX=4F00h
--------V-104F0B----------------------------INT 10 - Diamond Viper V330 - ???
AX = 4F0Bh
ECX = ???
???
Return: AL = 4Fh if function supported
AH = status
00h successful
ECX = ???
???
01h failed
Note: in BIOS v1.62, ECX is in multiples of 10000 (decimal) for both input
and output, and this function never fails
--------p-104F10BL00------------------------INT 10 - VESA VBE/PM (Power Management) v1.0+ - GET CAPABILITIES
AX = 4F10h
BL = 00h
ES:DI = 0000h:0000h (reserved for future use as pointer to info block)
Return: AL = 4Fh if function supported (installed)
AH = call status
00h successful
else failed
---if successful--BL = VBE/PM version (bits 7-4: major, bits 3-0: minor)
BH = supported states (see #00110)
ES:DI unchanged
Index: installation check;VESA VBE/Power Management|VESA DPMS
SeeAlso: AX=4F10h/BL=01h,AX=4F10h/BL=02h
Bitfields for VESA VBE/PM supported power states:
Bit(s) Description (Table 00110)
0 standby
1 suspend
2 off
3 reduced on
--------p-104F10BL01------------------------INT 10 - VESA VBE/PM (Power Management) v1.0+ - SET DISPLAY POWER STATE
AX = 4F10h
-144-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
BL = 01h
BH = new state (see #00111)
Return: AL = 4Fh if function supported
AH = call status
00h successful
else failed
SeeAlso: AX=4F10h/BL=00h,AX=4F10h/BL=02h,AX=A00Ch
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00111)
Values for VESA VBE/PM power state:
00h On
01h standby
02h suspend
04h Off
08h reduced On (for flat screens)
--------p-104F10BL02------------------------INT 10 - VESA VBE/PM (Power Management) v1.0+ - GET DISPLAY POWER STATE
AX = 4F10h
BL = 02h
Return: AL = 4Fh if function supported
AH = call status
00h successful
BH = current power state (see #00111)
else failed
SeeAlso: AX=4F10h/BL=00h,AX=4F10h/BL=01h,AX=A00Dh
--------V-104F11----------------------------INT 10 - VESA VBE/FP (Flat Panel Interface) - API
AX = 4F11h
BL = function
00h installation check / get capabilities
other registers vary by function
Return: varies by function
--------V-104F12----------------------------INT 10 - VESA VBE/CI (Cursor Interface) - API
AX = 4F12h
BL = function
other registers vary by function
Return: varies by function
SeeAlso: AX=4F4Dh
--------s-104F13BX0000----------------------INT 10 - VESA VBE/AI (Audio Interface) - INSTALLATION CHECK
-145-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
AX = 4F13h
BX = 0000h
Return: AL = 4Fh if function supported
AH = status
00h successful
BX = version (0010h for 1.00 -- note nonstandard value!)
01h failed
SeeAlso: AX=4F13h/BX=0001h,AX=4F13h/BX=0005h
--------s-104F13BX0001----------------------INT 10 - VESA VBE/AI (Audio Interface) - LOCATE DEVICE
AX = 4F13h
BX = 0001h
CX = 0000h ???
DX = type of device
0001h Wave device
0002h MIDI device
0003h Volume device
Return: AL = 4Fh if function supported
AH = status
00h successful
CX = handle [returned 1 for DX=1 and 3, and 2 for DX=2]
01h failed
SeeAlso: AX=4F13h/BX=0000h,AX=4F13h/BX=0002h
--------s-104F13BX0002----------------------INT 10 - VESA VBE/AI (Audio Interface) - QUERY DEVICE
AX = 4F13h
BX = 0002h
CX = handle
DX = query
0001h return length of GeneralDeviceClass
0002h return copy of GeneralDeviceClass (see #00112)
0003h return length of Volume Info Structure
0004h return copy of Volume Info Structure (see #00122)
0005h return length of Volume Services Structure
0006h return copy of Volume Services Structure (see #00124)
0007h-000Fh reserved
0010h-FFFFh device-specific
SI:DI -> buffer (functions 0002h,0004h,0006h)
Return: AL = 4Fh if function supported
AH = status
00h successful
D:\D\inter61a\INTERRUP.A
-146-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
SI:DI = length (functions 1,3,5)
SI:DI buffer filled (functions 2,4,6)
01h failed
Note: functions 0003h to 0006h are only supported for the Volume device
D:\D\inter61a\INTERRUP.A
Format of GeneralDeviceClass structure:
Offset Size Description (Table 00112)
00h 4 BYTEs name of the structure ("GENI")
04h DWORD structure length
08h WORD type of device (1=Wave, 2=MIDI)
0Ah WORD version of VESA driver support (0100h for 1.00)
10h var for CX=handle for Wave device:
Wave Info structure (see #00113)
some bytes ???
for CX=handle for MIDI device:
MIDI Info Structure (see #00118)
first 8 bytes of MIDI Service Structure ???
SeeAlso: #00122,#00124
Format of WAVE Info Structure:
Offset Size Description (Table 00113)
00h 4 BYTEs name of the structure ("WAVI")
04h DWORD structure length [0000007Eh]
08h DWORD driver software version [00000003h]
0Ch 32 BYTEs vendor name, etc. (ASCIZ string)
2Ch 32 BYTEs vendor product name
4Ch 32 BYTEs vendor chip/hardware description
6Ch BYTE installed board number
6Dh 3 BYTEs unused data
70h DWORD feature bits (see #00114)
74h WORD user determined preference field
76h WORD memory required for driver use [0200h]
78h WORD number of timer tick callbacks per second [0000h]
7Ah WORD channels: 1 = mono, 2 = stereo
stereo is assumed to be interleaved data
7Ch WORD bitfield of max sample sizes (see #00115)
SeeAlso: #00118
Bitfields for Wave feature bits:
Bit(s) Description (Table 00114)
0 8000hz Mono Playback
-147-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
1 8000hz Mono Record
2 8000hz Stereo Record
3 8000hz Stereo Playback
4 8000hz Full Duplex Play/Record
5 11025hz Mono Playback
6 11025hz Mono Record
7 11025hz Stereo Record
8 11025hz Stereo Playback
9 11025hz Full Duplex Play/Record
10 22050hz Mono Playback
11 22050hz Mono Record
12 22050hz Stereo Record
13 22050hz Stereo Playback
14 22050hz Full Duplex Play/Record
15 44100hz Mono Playback
16 44100hz Mono Record
17 44100hz Stereo Record
18 44100hz Stereo Playback
19 44100hz Full Duplex Play/Record
20-26 reserved (0)
27 driver must pre-handle the data
28 Variable Sample mono
playback
29 Variable Sample stereo playback
30 Variable Sample mono
record
31 Variable Sample stereo record
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00115)
Values for Sample data size:
01h 8bit play
02h 16bit play
10h 8bit record
20h 16bit record
Format of WAVE Audio Services structure:
Offset Size Description (Table 00116)
00h 4 BYTEs name of the structure
04h DWORD structure length
08h 16 BYTEs for future expansion
---entry points (details???)--18h DWORD DeviceCheck
11h compression (see also #00117)
-148-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
12h driver state
13h get current pos
14h sample rate
15h set preference
16h get DMA,IRQ
17h get IO address
18h get mem address
19h get mem free
1Ah full duplex
1Bh get block size
1Ch get PCM format
1Dh enable PCM format
80h-.. vendors can add DevChks above 0x80
1Ch DWORD PCMInfo
20h DWORD PlayBlock
24h DWORD PlayCont
28h DWORD RecordBlock
2Ch DWORD RecordCont
30h DWORD PauseIO
34h DWORD ResumeIO
38h DWORD StopIO
3Ch DWORD WavePrepare
40h DWORD WaveRegister
44h DWORD GetLastError
01h unsupported feature/function
02h bad sample rate
03h bad block length
04h bad block address
05h app. missed an IRQ
06h don't understand the PCM size/format
80h-.. vendors specific errors
48h DWORD TimerTick
4Ch DWORD ApplPSyncCB: CallBack: play filled in by the app
50h DWORD ApplRSyncCB: CallBack: rec filled in by the app
SeeAlso: #00120,#00124
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00117)
Values for type of compression:
01h IMA play
02h ALAW play
03h ULAW play
-149-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
11h
12h
13h
IMA record
ALAW record
ULAW record
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Format of MIDI Info Structure:
Offset Size Description (Table 00118)
00h 4 BYTEs name of the structure ("MIDI")
04h DWORD structure length
08h DWORD driver software version [00000003h]
0Ch 32 BYTEs vendor name, etc. (ASCIZ string)
2Ch 32 BYTEs vendor product name
4Ch 32 BYTEs vendor chip/hardware description
6Ch BYTE installed board number
6Dh 3 BYTEs unused data
70h 14 BYTEs the patch library file name [OPL2.BNK 00..]
7Eh DWORD feature bits (see #00119)
80h WORD user determined preference field
82h WORD memory required for driver use
84h WORD # of timer tick callbacks per second
86h WORD max # of tones (voices, partials)
SeeAlso: #00112,#00120,#00122
Bitfields for MIDI feature bits:
Bit(s) Description (Table 00119)
0-3 reserved for GM extensions
4 Transmitter/Receiver only
5 Patches preloaded
6 MIDI receive has time stamp
8 MIDI interrupt driven input supported
9 MIDI polled input supported
10 MIDI remote patches supported
Format of MIDI Service structure:
Offset Size Description (Table 00120)
00h 4 BYTEs name of the structure ("MIDS")
04h DWORD structure length
08h 16 WORDs patches loaded table bit field
28h 16 BYTEs for future expansion
---entry points (details???)--38h DWORD device check
11h return available tones
-150-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
12h return TRUE/FALSE if patch is understood
13h set preference
14h allow/disallow voice stealing
15h get FIFO sizes
16h get DMA,IRQ
17h get IO address
18h get mem address
19h get mem free
80h-.. vendors can add DevChks above 0x80
3Ch DWORD global reset
40h DWORD MIDI msg
44h DWORD poll MIDI
48h DWORD preload patch
4Ch DWORD unload patch
50h DWORD timer tick
54h DWORD get last error
01h unsupported feature/function
02h unknown patch type (see #00121)
03h all tones are used
04h messages are out of sync
05h an incoming patch was incomplete
06h an incoming patch couldn't be stored
07h had to drop an incoming byte
08h driver is failing a patch download
80h-.. vendors specific errors
58h DWORD Patch Block free callback
5Ch DWORD MIDI byte avail. callback
SeeAlso: #00116,#00124
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00121)
Values for MIDI Registered Patch Types:
10h OPL2
11h OPL3
Format of Volume Info Structure:
Offset Size Description (Table 00122)
00h 4 BYTEs name of the structure ("VOLI")
04h DWORD structure length (00000092h)
08h DWORD driver software version [00000001h]
0Ch 32 BYTEs vendor name, etc. (ASCIZ string)
2Ch 32 BYTEs vendor product name
-151-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
4Ch 32 BYTEs vendor chip/hardware description
6Ch BYTE installed board number (0 for 1st/only board)
6Dh 3 BYTEs unused data (0)
70h 24 BYTEs text name of the mixer channel
88h DWORD features bits (see #00123)
8Ch WORD minimum volume setting
8Eh WORD maximum volume setting
90h WORD attenuation/gain crossover
SeeAlso: #00112,#00124
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Bitfields for Volume feature bits:
Bit(s) Description (Table 00123)
0 Stereo Volume control available
2 Low Pass Filter is available
3 High Pass Filter is available
4 Parametric Tone Control is available
5 selectable output paths
8 Azimuth Field positioning supported
9 Phi Field positioning supported
10-30 unused???
31 Master Volume device
Format of Volume Services Structure:
Offset Size Description (Table 00124)
00h 4 BYTEs name of the structure ("VOLS")
04h DWORD structure length (00000038h)
08h 16 BYTEs 16 bytes for future expansion (0)
---entry points (details???)--18h DWORD device check
0011h filter range
0012h filter setting
0013h filter current
0014h tone range
0015h tone setting
0016h tone current
0017h path
0018h get IO address
0080h-.. vendors can add DevChks above 0x80
1Ch DWORD set vol to an absolute setting
01h User master volume setting
02h application master volume setting
-152-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
20h DWORD set 3D volume
24h DWORD tone control
28h DWORD filter control
2Ch DWORD output path
30h DWORD reset channel
34h DWORD get last error
01h unsupported feature/function
02h out of range parameter value
80h+ vendor-specific errors
SeeAlso: #00116,#00120
--------s-104F13BX0003----------------------INT 10 - VESA VBE/AI (Audio Interface) - OPEN DEVICE
AX = 4F13h
BX = 0003h
CX = handle
DX = API set (16/32-bit)
SI = segment ???
Return: AL = 4Fh if function supported
AH = status
00h successful
SI:CX -> memory ???
01h failed
SeeAlso: AX=4F13h/BX=0000h,AX=4F13h/BX=0002h,AX=4F13h/BX=0004h
--------s-104F13BX0004----------------------INT 10 - VESA VBE/AI (Audio Interface) - CLOSE DEVICE
AX = 4F13h
BX = 0004h
CX = handle
Return: AL = 4Fh if function supported
AH = status
00h successful
01h failed
SeeAlso: AX=4F13h/BX=0000h,AX=4F13h/BX=0003h,AX=4F13h/BX=0005h
--------s-104F13BX0005----------------------INT 10 - VESA VBE/AI (Audio Interface) - UNINSTALL DRIVER
AX = 4F13h
BX = 0005h
Return: AL = 4Fh if function supported
AH = status
00h successful
01h failed
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
-153-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
SeeAlso: AX=4F13h/BX=0000h,AX=4F13h/BX=0006h
--------s-104F13BX0006----------------------INT 10 - VESA VBE/AI (Audio Interface) - DRIVER CHAIN/UNCHAIN
AX = 4F13h
BX = 0006h
Return: AL = 4Fh if function supported
AH = status
00h successful
01h failed
SeeAlso: AX=4F13h/BX=0000h,AX=4F13h/BX=0005h
----------104F14----------------------------INT 10 - VESA OEM Extensions - API
AX = 4F14h
BL = function
00h installation check / get capabilities
other registers vary by function
Return: varies by function
Note: this function is provided for OEMs to implement system-specific
functionality in a VESA-compatible manner
----------104F14----------------------------INT 10 - VESA OEM Extensions - Matrox Millenium (BIOS v2.1)
AX = 4F14h
BL = function
00h installation check / get capabilities
ES:DI -> 256-byte buffer for Matrox-specific information
(see #00125)
Return: ES:DI buffer filled
01h read/write MGA indexed data register
BH = direction (00h = write, else read)
CL = register number (80h for most-recently used register)
CH = new value, if writing
Return: CH = current value, if reading
02h read/write register in MGA control space
BH = direction and size
bit 4: read register instead of writing
bits 1-0: data size (00 = BYTE, 01 = WORD, 10 = DWORD)
SI = register address
CL/CX/ECX = new value if writing
Return: CL/CX/ECX = current value if reading
03h read PINS byte
SI = offset of byte within PINS data (see #00126)
-154-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Return: CL = value of specified PINS byte
04h ??? (related to PLL programming)
DX = ???
Return: CL,EDX destroyed
05h read BIOS byte
SI = offset of byte relative to start of BIOS image
Return: CL = specified byte
else
Return: AX = FFFFh
Return: AL = 4Fh if function supported
AH = status
00h successful
01h failed
Note: most of this info is from http:\\grafi.ii.pw.edu.pl\gbm\matrox
SeeAlso: MEM C000h:7FFCh"Matrox"
D:\D\inter61a\INTERRUP.A
Format of Matrox-specific VESA extensions information:
Offset Size Description (Table 00125)
00h 7 BYTEs signature "VBE/MGA"
07h 10 BYTEs ??? (01h 01h 00h 00h 00h 00h 00h 00h 00h 07h)
11h WORD BIOS version (high byte = major, low byte = one-digit minor)
13h DWORD -> manufacturer name (ASCIZ "Matrox")
17h DWORD -> ASCIZ card name
1Bh DWORD -> ??? ASCIZ string (empty string on card examined)
1Fh DWORD -> ASCIZ vendor name
23h DWORD -> ASCIZ BIOS file base name
27h DWORD -> PINS
2Bh WORD video memory size in 64K units
2Dh DWORD linear address of linear frame buffer
31h DWORD linear address of MGA control aperture
35h WORD PCI bus/device for card???
37h 201 BYTEs unused??? (cleared to 00h)
Format of Matrox PINS data (version 3.0):
Offset Size Description (Table 00126)
00h 2 BYTEs signature ".A" (2Eh 41h)
02h BYTE structure length (40h for v3.0)
03h BYTE ???
04h WORD PINS version (high byte = major, low byte = minor)
06h WORD date last programmed
08h WORD number of times programmed
-155-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
0Ah WORD flags
0Ch 8 BYTEs ASCII serial number, three letters + five digits
14h 8 BYTEs ???
1Ch 4 BYTEs ASCII card version
20h DWORD PCB revision
24h BYTE maximum RAMDAC frequency in MHz (less 100)
25h BYTE maximum RAMDAC frequency???
26h BYTE maximum RAMDAc frequency???
27h BYTE ???
28h BYTE ??? timing data?
29h BYTE ???
2Ah BYTE ???
2Bh BYTE ???
2Ch BYTE ???
2Dh BYTE ???
2Eh BYTE ???
2Fh BYTE ???
30h 4 BYTEs ???
34h BYTE ???
35h BYTE ???
36h BYTE ???
37h BYTE memory size in 64K units
38h BYTE ???
39h BYTE ???
3Ah BYTE ???
3Bh BYTE ???
3Ch BYTE ???
3Dh BYTE ???
3Eh BYTE ???
3Fh BYTE checksum (to make sum of all bytes MOD 256 == 00h)
--------V-104F15BL00------------------------INT 10 - VESA VBE/DC (Display Data Channel) - INSTALLATION CHECK / CAPABILITIES
AX = 4F15h
BL = 00h
Return: AL = 4Fh if function supported
AH = status
00h successful
BX = ???
01h failed
???
SeeAlso: AX=4F15h/BL=01h,AX=4F15h/BL=02h
D:\D\inter61a\INTERRUP.A
-156-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
--------V-104F15BL01------------------------INT 10 - VESA VBE/DC (Display Data Channel) - READ EDID
AX = 4F15h
BL = 01h
CX = 0000h
DX = 0000h
ES:DI -> 128-byte buffer for EDID record (see #00127)
Return: AL = 4Fh if function supported
AH = status
00h successful
ES:DI buffer filled
01h failed (e.g. non-DDC monitor)
SeeAlso: AX=4F15h/BL=00h,AX=4F15h/BL=02h,I2C A0h"DDC"
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Format of VESA EDID record:
Offset Size Description (Table 00127)
00h 8 BYTEs padding (all FFh, or 00h FFh..FFh 00h)
08h WORD big-endian manufacturer ID (see #00136)
bits 14-10: first letter (01h='A', 02h='B', etc.)
bits 9-5: second letter
bits 4-0: third letter
0Ah WORD EDID ID code -- identifies monitor model
0Ch DWORD serial number or FFFFFFFFh
for "MAG", subtract 7000000 to get actual serial number
for "OQI", subtract 456150000
for "PHL", subtract ???
for "VSC", subtract 640000000
10h BYTE week number of manufacture
11h BYTE manufacture year - 1990
12h BYTE EDID version
13h BYTE EDID revision
14h BYTE video input type (see #00129)
15h BYTE maximum horizontal size in cm
16h BYTE maximum vertical size in cm
17h BYTE gamma factor (gamma = 1.0 + factor/100, so max = 3.55)
18h BYTE DPMS flags (see #00128)
19h BYTE chroma information: green X'/Y' and red X'/Y'
1Ah BYTE chroma information: white X'/Y' and blue X'/Y'
1Bh BYTE chroma information: red Y
1Ch BYTE chroma information: red X
1Dh BYTE chroma information: green Y
-157-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
1Eh BYTE chroma information: green X
1Fh BYTE chroma information: blue Y
20h BYTE chroma information: blue X
21h BYTE chroma information: white Y
22h BYTE chroma information: white X
23h BYTE established timings 1 (see #00130)
24h BYTE established timings 2 (see #00131)
25h BYTE manufacturer's reserved timing or 00h for none
bit 7: 1152x870 @ 75 Hz (Mac II, Apple)
26h 8 WORDs standard timing identification
resolution (low byte) and vertical frequency (high byte) for
each of eight modes (see #00132)
X resolution = (lowbyte + 31) * 8
36h 18 BYTEs detailed timing description #1 (see #00133)
(v1.1) alternately, text identification (see #00135)
48h 18 BYTEs detailed timing description #2
(v1.1) alternately, text identification (see #00135)
5Ah 18 BYTEs detailed timing description #3
(v1.1) alternately, text identification (see #00135)
6Ch 18 BYTEs detailed timing description #4
(v1.1) alternately, text identification (see #00135)
7Eh BYTE unused???
7Fh BYTE checksum
(radix-complement: 256-low byte of 16-bit sum of 00h-7Eh)
D:\D\inter61a\INTERRUP.A
Bitfields for DPMS EDID flags:
Bit(s) Description (Table 00128)
2-0 unused???
3 display type
=0 non-RGB multicolor
=1 RGB color
4 unused???
5 Active Off supported
6 Suspend supported
7 Standby supported
SeeAlso: #00127
Bitfields for DPMS input signal type:
Bit(s) Description (Table 00129)
0 separate sync
1 composite sync
-158-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
D:\D\inter61a\INTERRUP.A
2 sync on green
4-3 unused???
6-5 voltage level
00 0.700V/0.300V (1.00 Vp-p)
01 0.714V/0.286V
10 0.100V/0.400V
11 reserved
7 =1 digital signal, =0 analog
SeeAlso: #00127
Bitfields for DPMS established timings 1:
Bit(s) Description (Table 00130)
0 720x400 @ 70 Hz (VGA 640x400, IBM)
1 720x400 @ 88 Hz (XGA2)
2 640x480 @ 60 Hz (VGA)
3 640x480 @ 67 Hz (Mac II, Apple)
4 640x480 @ 72 Hz (VESA)
5 640x480 @ 75 Hz (VESA)
6 800x600 @ 56 Hz (VESA)
7 800x600 @ 60 Hz (VESA)
SeeAlso: #00127,#00131
Bitfields for DPMS established timings 2:
Bit(s) Description (Table 00131)
0 800x600 @ 72 Hz (VESA)
1 800x600 @ 75 Hz (VESA)
2 832x624 @ 75 Hz (Mac II)
3 1024x768 @ 87 Hz interlaced (8514A)
4 1024x768 @ 60 Hz (VESA)
5 1024x768 @ 70 Hz (VESA)
6 1024x768 @ 75 Hz (VESA)
7 1280x1024 @ 75 Hz (VESA)
SeeAlso: #00127,#00130
Bitfields for DPMS standard timing information:
Bit(s) Description (Table 00132)
5-0 vertical refresh frequency - 60 (Hz)
7-6 aspect ratio (Y resolution = X resolution * aspect ratio)
00 ???
01 0.75
10 0.8
-159-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
11 0.5625
Note: if both bytes of the timing are 00h or 01h, then the Standard Timing
is "None"
SeeAlso: #00127
D:\D\inter61a\INTERRUP.A
Format of Detailed Timing Description:
Offset Size Description (Table 00133)
00h BYTE horizontal frequency in kHz (if 00h, may be text)(see #00135)
01h BYTE vertical frequency in Hz
02h BYTE horizontal active time (pixels) and X resolution
03h BYTE horizontal blanking time (pixels)
04h BYTE horizontal active time 2 / horizontal blanking time 2
05h BYTE vertical active time (lines) and Y resolution
06h BYTE vertical blanking time (lines)
07h BYTE vertical active time 2 / vertical blanking time 2
08h BYTE horizontal sync offset (pixels)
09h BYTE horizontal sync pulsewidth (pixels)
0Ah BYTE vertical sync offset / vertical sync pulsewidth
0Bh BYTE vertical/horizontal sync offset 2 / vert/hor. sync pulsewidth 2
0Ch BYTE horizontal image size (mm)
0Dh BYTE vertical image size (mm)
0Eh BYTE horizontal image size 2 / vertical image size 2
0Fh BYTE horizontal border (pixels)
10h BYTE vertical border (lines)
11h BYTE type of display (see #00134)
SeeAlso: #00127,#00135
Bitfields for EDID detailed display type:
Bit(s) Description (Table 00134)
7 interlaced
6-5 stereo mode
00 normal display (no stereo)
01 stereo, right stereo sync high
10 stereo, left stereo sync high
11 undefined
4-3 sync type
00 sync analog composite
01 sync bipolar analog composite
10 sync digital composite
11 sync digital separate
---sync digital separate---160-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
2 vertical sync polarity (0 = negative, 1 = positive)
1 horizontal sync polarity (0 = negative, 1 = positive)
---other sync types--2 serrate
1 sync location (0 = on green, 1 = on RGB)
-----0 not used???
SeeAlso: #00133
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Format of EDID Text Identification Strings:
Offset Size Description (Table 00135)
00h 3 BYTEs 00h 00h 00h (to distinguish from detailed timing description)
03h BYTE text identifier
FFh serial number
FEh vendor name
FDh vertical/horizontal frequency range
FCh model name
---frequency range--04h BYTE 00h ???
05h BYTE minimum vertical refresh frequency in Hz
06h BYTE maximum vertical refresh
07h BYTE minimum horizontal frequency in kHz
08h BYTE maximum horizontal frequency
09h BYTE FFh ???
---other--04h 14 BYTEs text, may be terminated with either a NUL (00h) or LF (0Ah)
SeeAlso: #00132
(Table 00136)
Values for manufacturer ID:
"ACT" Targa
"ADI" ADI Corporation
http://www.adi.com.tw
"AOC" AOC International (USA) Ltd. (see #00137)
"API" Acer America Corp. (see #00138)
"APP" Apple Computer, Inc. (see #00139)
"ART" ArtMedia
"AST" AST Research (see #00140)
"CPL" Compal Electronics, Inc. / ALFA (see #00141)
"CPQ" COMPAQ Computer Corp. (see #00142)
"CTX" CTX - Chuntex Electronic Co. (see #00143)
"DEC" Digital Equipment Corporation (see #00144)
-161-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Dell Computer Corp. (see #00145)
Delta Electronics, Inc. (see #00146)
Daewoo Telecom Ltd (see #00147)
ELITEGROUP Computer Systems (see #00148)
EIZO (see #00149)
Funai Electric Company of Taiwan
LG Electronics Inc. (GoldStar Technology, Inc.) (see #00158)
Gateway 2000
Hyundai Electronics Industries Co., Ltd. (see #00150)
Hitachi (see #00151)
Hansol Electronics (see #00152)
Hitachi Ltd. / Nissei Sangyo America Ltd. (see #00153)
Hewlett Packard (see #00154)
IBM PC Company (see #00155)
Fujitsu ICL (see #00156)
Idek Iiyama North America, Inc. (see #00157)
KFC Computek
ADLAS / AZALEA
LINK Technologies, Inc.
Lite-On
MAG InnoVision (see #00159)
Maxdata Computer GmbH
Panasonic Comm. & Systems Co. (see #00168)
Mitsubishi Electronics (see #00160)
miro Computer Products AG (see #00161)
MITAC
NANAO (see #00162)
NEC Technologies, Inc. (see #00163)
Nokia (see #00164)
OPTIQUEST (see #00165)
Packard Bell
Princeton Graphic Systems (see #00166)
Philips Consumer Electronics Co. (see #00167)
Relisys
Samsung (see #00169)
Samtron (see #00170)
Smile
Siemens Nixdorf
Sony Corporation
Sceptre
Shamrock Technology
D:\D\inter61a\INTERRUP.A
"DEL"
"DPC"
"DWE"
"ECS"
"EIZ"
"FCM"
"GSM"
"GWY"
"HEI"
"HIT"
"HSL"
"HTC"
"HWP"
"IBM"
"ICL"
"IVM"
"KFC"
"LKM"
"LNK"
"LTN"
"MAG"
"MAX"
"MEI"
"MEL"
"MIR"
"MTC"
"NAN"
"NEC"
"NOK"
"OQI"
"PBN"
"PGS"
"PHL"
"REL"
"SAM"
"SDI"
"SMI"
"SNI"
"SNY"
"SPT"
"SRC"
-162-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
"STP" Sceptre
"TAT" Tatung Co. of America, Inc. (see #00171)
"TRL" Royal Information Company (see #00172)
"TSB" Toshiba, Inc.
"UNM" Unisys Corporation
"VSC" ViewSonic Corporation (see #00173)
"WTC" Wen Technology
"ZCM" Zenith Data Systems
"___" Targa
SeeAlso: #00127
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00137)
Values for AOC monitor EDID:
A566h AOC SPECTRUM 5Nlr
A782h AOC SPECTRUM 7Nlr
D350h AOC SPECTRUM 4V, 4VA, 4Vlr, 4VlrA
D566h AOC SPECTRUM 5Vlr, 5VlrA
E570h AOC SPECTRUM 5Glr
E750h AOC SPECTRUM 7DlrA
SeeAlso: #00136,#00138
(Table 00138)
Values for Acer monitor EDID:
0037h AcerView 55
424Ch AcerView 76ie
440Bh AcerView 11D
4421h AcerView 33D
4522h AcerView 7134e
4536h AcerView 7154e
4538h AcerView 7156e
454Ch AcerView 7176ie
454Eh AcerView 7178ie
4938h AcerView 7156i
494Ch AcerView 76i
494Eh AcerView 78i
4962h AcerView 98i
4C21h AcerView 33DL
4C22h AcerView 34TL
4C37h AcerView 55L
4C38h AcerView 56L
4E4Ch AcerView 76N
-163-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
5321h AcerView 7133s
5322h AcerView 7134s
5336h AcerView 7154s
5338h AcerView 7156s, 7156is
534Ch AcerView 7176is
5422h AcerView 34T
SeeAlso: #00136,#00137,#00140
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00139)
Values for Apple Computer monitor EDID:
0352h AppleVision 850
SeeAlso: #00136
(Table 00140)
Values for AST monitor EDID:
8001h ASTVision 4V
8002h ASTVision 4I
8003h ASTVision 4N
8004h ASTVision 4L
8005h ASTVision 5L
8006h ASTVision 7L
8007h ASTVision 7H
8008h ASTVision 20H
8009h AST Sabre
800Ah ASTVision 5V
SeeAlso: #00136,#00127,#00138,#00141
(Table 00141)
Values for ALFA monitor EDID:
096Bh ALFA TH-450
SeeAlso: #00136,#00140,#00142
(Table 00142)
Values for Compaq monitor EDID:
0011h COMPAQ 1024
0012h COMPAQ 1024
0013h COMPAQ 1024
0014h COMPAQ 1024
0015h COMPAQ 1024
0016h COMPAQ 1024
0017h COMPAQ PRB
-164-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
D:\D\inter61a\INTERRUP.A
0018h
0019h
001Ah
0020h
0021h
0022h
0023h
0024h
0025h
0026h
0027h
0028h
0029h
002Ah
002Bh
002Ch
002Dh
002Eh
002Fh
0030h
0031h
0032h
0033h
0040h
0041h
0042h
0043h
0044h
0045h
0046h
0047h
0048h
0049h
0100h
0146h
0147h
0346h
0347h
0348h
0349h
034Ah
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
PRB
PRB
PRB
PRB
PRB
151FS
151FS
151FS
151FS
151FS
151FS
151FS
PRB
PRB
PRB
PRB
171FS
171FS
171FS
171FS
171FS
171FS
171FS
QVision
QVision
QVision
QVision
QVision
QVision
QVision
QVision
QVision
QVision
1024
1024
1024
151FS
151FS
151FS
151FS
151FS
200
200
200
200
200
200
200
200
200
200
-165-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
034Bh
0546h
0547h
0548h
0549h
0746h
0747h
0846h
0847h
0848h
0849h
084Ah
084Bh
084Ch
084Dh
0946h
0947h
0948h
0949h
0A46h
0A47h
0A48h
0A49h
0A4Ah
0A4Bh
0A4Ch
0A4Dh
0D46h
0D47h
0D48h
0D49h
0D4Ah
0D4Bh
0D4Ch
0D4Dh
0F46h
0F47h
0F48h
0F49h
0F4Ah
0F4Bh
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
COMPAQ
151FS
171FS
171FS
171FS
171FS
PRB
PRB
PRA
PRA
PRA
PRA
PRA
PRA
PRA
PRA
PRB
PRB
PRB
PRB
PRA
PRA
PRA
PRA
PRA
PRA
PRA
PRA
140
140
140
140
140
140
140
140
150
150
150
150
150
150
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
-166-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
0F4Ch COMPAQ 150
0F4Dh COMPAQ 150
SeeAlso: #00136,#00141,#00143
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00143)
Values for "CTX" monitor EDID:
1451h CTX 1451
1551h CTX 1551
1562h CTX 1562
1565h CTX 1565
1569h CTX 1569S 15-inch
1765h CTX 1765
1785h CTX 1785 XE
2085h CTX 2085
2185h CTX 2185
SeeAlso: #00136,#00142,#00144
(Table 00144)
Values for Digital Equipment Corporation monitor EDID:
06FAh Digital 21" Color (FR-PCXAV-WZ)
073Ah Digital 17" Color (FR-PCXAV-YZ)
BA08h Digital 15" Color Monitor (FR-PCXBV-E*)
DA08h Digital 17" Color Monitor (FR-PCXBV-F*)
SeeAlso: #00136,#00143,#00145
(Table 00145)
Values for Dell monitor EDID:
139Ah Dell Ultrascan 14XE
139Bh Dell Ultrascan 14XE
139Ch Dell Ultrascan 14XE
139Dh Dell Ultrascan 14XE
2210h Dell Ultrascan V17X
2211h Dell Ultrascan V17X
2212h Dell Ultrascan V17X
2213h Dell Ultrascan V17X
2214h Dell Ultrascan 21TE
2215h Dell Ultrascan 21TE
2216h Dell Ultrascan 21TE
2217h Dell Ultrascan 21TE
3024h Dell VS17X
3025h Dell VS17X
-167-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
3026h Dell VS17X
3027h Dell VS17X
4273h Dell VS15X
SeeAlso: #00136,#00144,#00146
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00146)
Values for Delta Electronics monitor EDID:
0456h Delta DA-456
1565h Delta DA-1565
1765h Delta DA-1765
SeeAlso: #00136,#00145,#00147
(Table 00147)
Values for Daewoo monitor EDID:
1423h Daewoo CMC-1423B1
1427h Daewoo CMC-1427X1
1502h Daewoo CMC-1502B1
1505h Daewoo CMC-1505X
1507h Daewoo CMC-1507X1
1703h Daewoo CMC-1703B
5133h Daewoo CMC-1511B
7044h Daewoo CMC-1704C
SeeAlso: #00136,#00146,#00148
(Table 00148)
Values for ELITEGROUP Computer Systems monitor EDID:
0001h ECS VERTOS 1401
0002h ECS VERTOS 1501
0003h ECS VERTOS 1502
0004h ECS VERTOS 1503
0005h ECS VERTOS 1700
0006h ECS VERTOS 1701
0007h ECS VERTOS 1700
0008h ECS VERTOS 2101
0009h ECS VERTOS 2102
SeeAlso: #00136,#00147,#00149
(Table 00149)
Values for EIZO monitor EDID:
0200h EIZO FlexScan F351
0201h EIZO FlexScan F553
-168-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
0202h EIZO FlexScan F563
0203h EIZO FlexScan F764
0204h EIZO FlexScan F784
0206h EIZO FlexScan 6600
0300h EIZO FlexScan 6500
0302h EIZO 9060S
0303h EIZO 9065S
0305h EIZO FlexScan T563
0306h EIZO 9070S
0307h EIZO 9080i
0308h EIZO 9400i
0309h EIZO 9500
030Ah EIZO FlexScan F340iW
030Ch EIZO FlexScan F552
030Dh EIZO FlexScan F560iW
030Fh EIZO FlexScan F760iW
0310h EIZO FlexScan F780iW
0311h EIZO FlexScan T560i
0312h EIZO FlexScan T660i
0313h EIZO FlexScan T562
0314h EIZO FlexScan T662
038Ch EIZO FlexScan F550iW
SeeAlso: #00136,#00148,#00150
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00150)
Values for Hyundai monitor EDID:
0B42h Hyundai Deluxscan 21
12F0h Hyundai Deluxscan 14S
16D8h Hyundai Deluxscan 15B
16E8h Hyundai Deluxscan 15G
16EEh Hyundai Delucscan 15G+
1E02h Hyundai Deluxscan 17 Pro
1EB8h Hyundai Deluxscan 17B
1EBEh Hyundai Deluxscan 17B+
5864h Hyundai DeluxScan 15 Pro
B81Eh Hyundai DeluxScan 17
SeeAlso: #00136,#00149,#00151
(Table 00151)
Values for Hitachi monitor EDID:
1717h Hitachi Accuvue GX17L
-169-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
1727h Hitachi HM1764
1827h Hitachi HM1782
2147h Hitachi HM4721
2149h Hitachi HM4921
4020h Hitachi HM4020
4021h Hitachi HM4021
4711h Hitachi Accuvue UX4721
4810h Hitachi Accuvue GX20
4811h Hitachi Accuvue GX21
4820h Hitachi HM4820
4821h Hitachi HM4821
4830h Hitachi Accuvue GX20H
4911h Hitachi Accuvue UX4921
6421h Hitachi HM6421
6811h Hitachi Accuvue UX6821
6821h Hitachi HM6821
SeeAlso: #00136,#00150,#00152
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00152)
Values for Hansol Electronics monitor EDID:
0579 Hansol Electronics Mazellan14px
057A Hansol Electronics Mazellan400A
05DD Hansol Electronics Mazellan15ax
A605 Hansol Electronics Mazellan17px
SeeAlso: #00136,#00151,#00153
(Table 00153)
Values for Hitachi, Ltd. monitor EDID:
AB6Fh CM-1711M
ABC2h CM-2112M
ABC7h CM-2111M
ABCCh CM-2110M
ABE0h Hitachi, Ltd CM802
ABE2h Hitachi, Ltd CM801
ABE3h Hitachi, Ltd CM800
ABEAh Hitachi, Ltd CM803
ABF4h Hitachi, Ltd CM701
AFC8h Hitachi, Ltd CM500
AFD2h Hitachi, Ltd CM600
AFD7h Hitachi, Ltd CM611
SeeAlso: #00136,#00152,#00154
-170-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00154)
Values for Hewlett-Packard monitor EDID:
0AF0h HP D2800A Ultra VGA 1600 21"
0AF6h HP D2806A Ergo Ultra VGA 15"
0AF8h HP D2808 1024 Low Emission
0AFFh HP D2815A 1024 Low Emission 14"
0F11h HP D3857A Multi Media 15"
0F12h HP D3858A Multi Media 14"
SeeAlso: #00136,#00151,#00155
(Table 00155)
Values for IBM monitor EDID:
198Eh IBM G41
198Fh IBM G50
1990h IBM G70
1991h IBM G200
1999h IBM P50
199Ah IBM P70
199Bh IBM P200
1BB7h IBM 7095
1BB9h IBM 7097
2112h IBM 2112
2113h IBM 2113
2114h IBM 2114
2115h IBM 2115
2117h IBM 2117
2215h IBM 2215
2238h IBM 2238
2248h IBM 2248
2264h IBM 2264
2535h IBM 9525-0X1
26ACh IBM Aptiva 9900
27ADh IBM Aptiva 9901
6312h IBM 6312
6314h IBM 6314
6315h IBM 6315
6317h IBM 6317
6319h IBM 6319
6321h IBM 6321
6322h IBM 6322
-171-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
6324h IBM 6324
6325h IBM 6325
6327h IBM 6327
8504h IBM 8504
8511h IBM 8511
8512h IBM 8512
8513h IBM 8513
8514h IBM 8514
8515h IBM 8515
8517h IBM 8517
8518h IBM 8518
9504h IBM 9504
9515h IBM 9515
9517h IBM 9517
9518h IBM 9518
9521h IBM 9521
9524h IBM 9524
9525h IBM 9525
9527h IBM 9527
SeeAlso: #00136,#00154,#00156
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00156)
Values for Fujitsu ICL monitor EDID:
0100h Fujitsu ICL ErgoPro 211v
0200h Fujitsu ICL ErgoPro 171p
0400h Fujitsu ICL ErgoPro 171v
0700h Fujitsu ICL ErgoPro 151p
0800h Fujitsu ICL ErgoPro 151p AutoBrite
0A00h Fujitsu ICL ErgoPro 151v
0B00h Fujitsu ICL ErgoPro 141v
0D00h Fujitsu ICL ErgoPro 141p
0F00h Fujitsu ICL ErgoPro 152v
1400h Fujitsu ICL ErgoPro 142v
1600h Fujitsu ICL ErgoPro e153
1900h Fujitsu ICL ErgoPro x173
1A00h Fujitsu ICL ErgoPro x173a
1C00h Fujitsu ICL ErgoPro x152
1D00h Fujitsu ICL ErgoPro e173
2200h FUJITSU ErgoPro e154
2400h FUJITSU ErgoPro x174
SeeAlso: #00136,#00155,#00157
-172-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00157)
Values for Idek Iiyama North America monitor EDID:
1700h Iiyama Vision Master MF-8617
SeeAlso: #00136,#00156,#00158
(Table 00158)
Values for LG Electronics monitor EDID:
36B4h LG StudioWorks 44m
36B9h LG StudioWorks 44i
3AA0h LG 1505s
3AA2h LG StudioWorks 56m
3AAFh LG StudioWorks 56T 15-inch
3AB0h LG StudioWorks 5D
3AB6h LG StudioWorks 5D
426Ch LG StudioWorks 78i
426Dh LG StudioWorks 78T
426Eh LG StudioWorks 76i
4273h LG StudioWorks 76m
4274h LG StudioWorks 78m
4277h LG StudioWorks 74m
4278h LG StudioWorks 74i
427Eh LG StudioWorks 7D
427Fh LG StudioWorks 78D
4280h LG StudioWorks 78DT
4281h LG StudioWorks 7DT
4284h LG StudioWorks 76T
42CFh LG 1725s
4E21h LG StudioWorks 20i
SeeAlso: #00136,#00157,#00159
(Table 00159)
Values for MAG monitor EDID:
5620h DX1595
5624h DX15T
5626h DX1795
SeeAlso: #00136,#00158,#00160
(Table 00160)
Values for Mitsubishi monitor EDID:
0040h Mitsubishi Diamond Pro 21TX (THN-9105)
-173-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
2040h Mitsubishi Diamond Scan 20H (FR-8905)
2040h Mitsubishi Diamond Pro 20X (FR-8905B)
6140h Mitsubishi Diamond Scan 17HX (FFF8705)
8040h Mitsubishi Diamond Pro 15H (SD-57xxC)
4040h Mitsubishi Diamond Pro 17TX (TFG-8705)
408Fh Mitsubishi Diamond Scan 15VX (SD58xx)
40C0h Mitsubishi Diamond Pro 87TXM (TFM8705)
SeeAlso: #00136,#00159,#00161
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00161)
Values for Miro monitor EDID:
0721h PROOFSCREEN miroC21107
6815h miroD1568
6817h PROOFSCREEN miroC1768
6917h miroD1769
8217h PROOFSCREEN miroC1782
8520h PROOFSCREEN miroC2085 E
8521h PROOFSCREEN miroC2185
9321h PROOFSCREEN miroC2193
SeeAlso: #00136,#00160,#00162
(Table 00162)
Values for Nanao monitor EDID:
0000h NANAO USA FlexScan T2-20
0400h NANAO USA F2-15
0401h NANAO USA F2-17
0402h NANAO USA F2-17EX
0403h NANAO USA F2-21
0404h NANAO USA FX2-21
0405h NANAO USA FlexScan T2-17TS
0406h NANAO FlexScan 6600
0502h NANAO 9060S
0503h NANAO 9065S
0506h NANAO 9070U
0507h NANAO 9080i
0508h NANAO 9400i
0509h NANAO 9500
050Ah NANAO FlexScan F340iW
050Bh NANAO FlexScan F550i
050Ch NANAO FlexScan F550iW
050Dh NANAO FlexScan F560iW
-174-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
050Eh NANAO FlexScan F750i
050Fh NANAO FlexScan F760iW
0510h NANAO FlexScan F780iW
0511h NANAO FlexScan T560i
0512h NANAO FlexScan T660i
0513h NANAO USA FlexScan T2-17
0514h NANAO USA FlexScan T2-20
0580h NANAO USA FlexScan 6300
0800h NANAO FlexScan 33F
0802h NANAO FlexScan 88F
0805h NANAO FlexScan 54T
0882h NANAO FlexScan 52F
0900h NANAO FlexScan 6500
0902h NANAO 9060S
0906h NANAO 9070U
0907h NANAO 9080i
090Ah NANAO FlexScan F347
090Bh NANAO FlexScan F550i
090Ch NANAO FlexScan F557
090Fh NANAO FlexScan 77F
0910h NANAO FlexScan F780iJ
0911h NANAO FlexScan T560iJ
0912h NANAO FlexScan T660iJ
0913h NANAO FlexScan 56T
0914h NANAO FlexScan 68T
098Ah NANAO FlexScan F347II
098Ch NANAO FlexScan 55F
098Fh NANAO FlexScan 76F
0991h NANAO FlexScan T567
0993h NANAO FlexScan 53T
SeeAlso: #00136,#00161,#00163
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00163)
Values for NEC monitor EDID:
37FAh NEC MultiSync XV14
37FBh NEC MultiSync XV14
3A66h NEC MultiSync C400
3C00h NEC MultiSync XE15
3C0Ah NEC MultiSync XP15
3C14h NEC MultiSync XV15
3C1Eh NEC MultiSync XE15
-175-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
3D5Eh NEC MultiSync XV15+
3D68h NEC MultiSync M500
3E4Eh NEC MultiSync C500
43A8h NEC MultiSync XE17
43B2h NEC MultiSync XE17
43BCh NEC MultiSync XV17
4416h NEC MultiSync XP17
533Eh NEC MultiSync XE21
53B6h NEC MultiSync XP21
SeeAlso: #00136,#00162,#00164
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00164)
Values for Nokia monitor EDID:
008Dh NOKIA 449M
0098h NOKIA 449X
00A3h NOKIA 447KC
00A9h NOKIA 447XI
00ABh NOKIA 447KA
00ADh NOKIA 447M
00B7h NOKIA 447W
00B8h NOKIA 447X
00BBh NOKIA 447XAV
00BCh NOKIA 447K
00D2h NOKIA 445R
SeeAlso: #00136,#00163,#00165
(Table 00165)
Values for OptiQuest monitor EDID:
3138h OPTIQUEST VA656
3141h OPTIQUEST 14ES
3232h OPTIQUEST 1562A-2
3233h OPTIQUEST 1769DC
3234h OPTIQUEST 1000S-2
3332h OPTIQUEST V655
3333h OPTIQUEST V775
3432h OPTIQUEST V650
3832h OPTIQUEST V665
4637h OPTIQUEST 1769DC
SeeAlso: #00136,#00164,#00166
(Table 00166)
-176-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
Values for Princeton Graphics monitor EDID:
003Bh Princeton EO15
003Dh Princeton EO17
SeeAlso: #00136,#00165,#00167
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00167)
Values for Philips monitor EDID:
0200h Philips CM0200 (15C)
0500h Philips CM0500 (20C)
0700h Philips CM0700 (20T)
0800h Philips CM0800 (15B)
1200h Philips CM1200 (15A)
1800h Philips CM1800 (15A)
2000h Philips CM0200 (14B)
2600h Philips 17TCM26
2800h Philips 17BCM28
3800h Philips 17ACM38
5600h Philips CM5600 (20B)
700Bh Philips CM0700 (21B)
8000h Philips CM0800 (14A)
SeeAlso: #00136,#00166,#00168
(Table 00168)
Values for Panasonic monitor EDID:
1604h Panasonic TX-D2151W-ES
1610h Panasonic TX-D2151NM
SeeAlso: #00136,#00167,#00169
(Table 00169)
Values for Samsung monitor
0000h Samsung SyncMaster
0100h Samsung SyncMaster
1530h Samsung 15GLsi
4610h Samsung SyncMaster
4690h Samsung SyncMaster
4D50h Samsung SyncMaster
4D51h Samsung SyncMaster
4D52h Samsung SyncMaster
4D70h Samsung SyncMaster
4D71h Samsung SyncMaster
4D72h Samsung SyncMaster
EDID:
3Ne
4S
21GLs
20GLsi
15GLe
15GLi
15M
17GLi
17GLsi
6Ne
-177-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
D:\D\inter61a\INTERRUP.A
4D73h Samsung 17GLi
4D74h Samsung 17GLsi
5450h Samsung SyncMaster 15Me
6D20h Samsung SyncMaster 15GLe
SeeAlso: #00136,#00168,#00170
(Table 00170)
Values for Samtron monitor EDID:
1428h Samtron 428PT/PTL
1528h Samtron SC-528TXL
1529h Samtron SC-528UXL
1530h Samtron SC-528MXLJ
4690h Samtron SC-208DXL+
4D70h Samtron SC-728FXL
4D71h Samtron SC-726GXL
5451h Samtron SC-528MDL
SeeAlso: #00136,#00169,#00171
(Table 00171)
Values for Tatung monitor EDID:
1F65h Intelliscan TM651x series
1F67h Intelliscan TM671x series
2F44h Intelliscan TM442x series
2F45h Intelliscan TM452x series
434Dh Tatung CM-17MC
4855h Tatung CM-14UH
SeeAlso: #00136,#00170,#00172
15"
17"
14"
15"
(Table 00172)
Values for Royal Information Company monitor EDID:
061Ch TRL/RIC DL-1564
0622h TRL/RIC DH-1570
SeeAlso: #00136,#00171,#00173
(Table 00173)
Values for ViewSonic monitor EDID:
0C00h ViewSonic 17GS
0C0Fh ViewSonic 17PS
0C1Fh ViewSonic 17GA
1600h ViewSonic 21PS-2
2601h ViewSonic 15GS
-178-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
2600h
3141h
3142h
3143h
3145h
3252h
3253h
334Bh
334Ch
3351h
344Bh
344Ch
3451h
354Dh
354Eh
3550h
3644h
3646h
3648h
364Ah
364Bh
364Ch
3744h
3746h
3748h
374Bh
374Ch
3844h
3846h
3848h
384Ah
384Bh
384Ch
3944h
3946h
3948h
394Ah
394Bh
394Ch
424Ah
424Bh
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
ViewSonic
15GS-2
14ES
14ES
14ES
15GS-3
21PS-2
21PS-2
17GS-2
17GS-2
PT810
17PS-2
17PS-2
PT810-2
GT800
GT800
GT800
15GA
15GA
15GA
PT770
PT770
PT770
15G-2
15G-2
15G-2
17GA
17GA
15ES-2
15ES-2
15ES-2
17EA
17EA
17EA
15GS-2
15GS-2
15GS-2
17GS-2
17GS-2
17GS-2
GT770
GT770
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
-179-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
424Ch ViewSonic GT770
434Ah ViewSonic 17PS-2
434Bh ViewSonic 17PS-2
434Ch ViewSonic 17PS-2
4439h ViewSonic 15GS-2
444Ah ViewSonic 17GA-2
4637h ViewSonic 1769DC
4745h ViewSonic G653 (VCDTS21444-2E)
SeeAlso: #00136,#00172
--------V-104F15BL02------------------------INT 10 - VESA VBE/DC (Display Data Channel) - READ VDIF
AX = 4F15h
BL = 02h
???
Return: AL = 4Fh if function supported
AH = status
00h successful
???
01h failed
SeeAlso: AX=4F15h/BL=00h,AX=4F15h/BL=01h
--------V-104F16----------------------------INT 10 - VESA VBE/GC (Graphics System Configuration) - API
AX = 4F16h
BL = function
00h installation check / get capabilities
other registers vary by function
Return: varies by function
--------V-104F17----------------------------INT 10 - VESA VBE/AF (Accelerator Functions) - API
AX = 4F17h
BL = function
00h installation check / get capabilities
other registers vary by function
Return: AL = 4Fh if function supported
AH = status
00h successful
01h failed
02h hardware does not support function
03h function not available in current video mode
else reserved for future error codes
other vary by function
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
-180-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Notes: the accelerator function code should be given a 32-bit protected
mode stack which has at least 1024 bytes available for use by the
VBE/AF code
when called, the I/O permission bitmap must allow access to any
ports which VBE/AF may require for operation
SeeAlso: AX=4F0Bh
--------V-104F4D----------------------------INT 10 - VESA - VIDEO CURSOR INTERFACE REQUEST
AX = 4F4Dh
BX = number of bytes available for VCI use
DS:0000h -> buffer for VCI
ES:DI -> VCI driver callback function
Return: AL = 4Fh if supported
AH = status
00h successful
BX = number of bytes used by VCI
ES:DI -> VCI request handler
01h failed
Desc: allow the VESA BIOS Extensions to cooperate with a pointing-device
(typically mouse) driver
SeeAlso: AX=4F12h
--------V-104F70----------------------------INT 10 - Avance Logic - GET ADAPTER INFORMATION
AX = 4F70h
Return: AX = 004Fh if successful
BL = board information (see #00174)
BH = board type???
00h on ALG2101
FFh otherwise
SeeAlso: AX=4F00h
Bitfields for Avance Logic board information:
Bit(s) Description (Table 00174)
0-1 video RAM size
00 256K
01 512K
10 1M
11 2M
2 ???
3 slot size???
=0 8-bit slot
-181-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
=1 16-bit slot
4 unused
5 set on ALG2228/AL2301
6-7 unused
--------V-104FDD----------------------------INT 10 - ATI M64VBE.COM - GET RESIDENT SEGMENT
AX = 4FDDh
Return: AX = CS of resident code
Program: M64VBE is a VESA VBE 2.0 driver TSR for ATI's Mach64 video chip
SeeAlso: AX=4FFFh/BX=364Dh"M64VBE",INT 60"M64VBE"
--------V-104FFF----------------------------INT 10 - VESA SuperVGA BIOS - Everex - TURN VESA ON/OFF
AX = 4FFFh
DL = new state (00h off, 01h on)
Return: AX = 0000h if successful
--------V-104FFF----------------------------INT 10 - Diamond Stealth 24 - SET/RESET DUAL DISPLAY MODE
AX = 4FFFh
BX = dual display mode
00h reset
01h set dual display, 32KB VGA test
02h set dual display, 64KB VGA test
Return: AX = 4F00h if successful
BX = number of scanlines off screen for test mode
--------V-104FFFBX364D----------------------INT 10 - ATI M64VBE.COM - UNINSTALL
AX = 4FFFh
BX = 364Dh ('6M')
CX = 5634h ('V4')
Return: AX,DX,DS,ES destroyed
Program: M64VBE is a VESA VBE 2.0 driver TSR for ATI's Mach64 video chip
SeeAlso: AX=4FDDh"M64VBE",INT 60"M64VBE"
--------U-1050------------------------------INT 10 - SCROLOCK.COM - INSTALLATION CHECK
AH = 50h
Return: BX = 1954h if installed
AL = 00h if inactive, nonzero if active
Program: SCROLOCK is a utility supplied with System Enhancement Associates'
ARC archiver
SeeAlso: AH=51h
--------J-105000----------------------------D:\D\inter61a\INTERRUP.A
-182-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
INT 10 - VIDEO - AX PC - SET SCREEN COUNTRY CODE
AX = 5000h
BX = country code
0001h USA (English), 0051h Japan
Return: AL = status
00h successful
01h bad country code
02h other error
Note: This function is called with BX=0051h by Japanese versions of
MS-DOS/PC DOS/DR DOS IO.SYS/IBMBIO.COM at initialization time.
SeeAlso: AX=5001h,INT 16/AX=5000h
--------J-105001----------------------------INT 10 - VIDEO - AX PC - GET SCREEN COUNTRY CODE
AX = 5001h
Return: AL = status
00h successful
BX = country code
02h error
SeeAlso: AH=00h,AX=5000h,INT 16/AX=5001h,INT 21/AH=38h
--------V-105049----------------------------INT 10 - VIDEO - SCREENR v1.55+ - API
AX = 5049h ('PI')
BX = function
0000h installation check
0001h lock mode
0002h unlock mode
0003h lock palette
0004h unlock palette
Return: AX = 0000h if installed
BX = TSR version (BH=major,BL=minor)
CL = mode locking status
00h mode not locked
01h mode locked: INT 10/AH=00h disabled
CH = palette locking status
00h palette not locked
01h palette locked, the following functions are disabled:
AX=1000h, AX=1001h, AX=1002h, AX=1010h, AX=1012h
Program: SCREENR is a TSR supplied with Patrick Ibbetson's SCREEN display
utility.
Index: installation check;SCREENR
--------U-1051-------------------------------183-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
INT 10 - SCROLOCK.COM - ENABLE/DISABLE
AH = 51h
AL = state
00h disable
nonzero enable
Return: nothing
Program: SCROLOCK is a utility supplied with System Enhancement Associates'
ARC file archiver
SeeAlso: AH=50h"SCROLOCK"
--------J-105100----------------------------INT 10 - VIDEO - AX PC - REGISTER EXTERNAL CHARACTER
AX = 5100h
BH = character width in bits (10h)
BL = character height (10h)
DX = character code (DH = F0h-F3h, DL=40h-7Eh,80h-FCh)
ES:BP -> character bitmap
Return: AL = status (00h successful, 01h failed)
SeeAlso: AX=5101h,INT 1F"SYSTEM DATA"
--------J-105101----------------------------INT 10 - VIDEO - AX PC - READ CHARACTER
AX = 5101h
BH = character width in bits
BL = character height
DX = character code (DH = 00h if 8-bit character)
ES:BP -> buffer for character bitmap
Return: AL = status (00h successful, 01h failed)
SeeAlso: AH=09h,AX=5100h
--------J-105200----------------------------INT 10 - VIDEO - AX PC - SET VIRTUAL TEXT RAM BUFFER
AX = 5200h
BX = segment of buffer
Return: nothing
SeeAlso: AX=5201h
--------J-105201----------------------------INT 10 - VIDEO - AX PC - GET VIRTUAL TEXT RAM BUFFER
AX = 5201h
Return: BX = segment of buffer or 0000h if failed
SeeAlso: AX=8300h,AH=FEh
----------1053------------------------------INT 10 - Show Partner F/X v3.6 - START PRESENTATION
AH = 53h
-184-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
DS:DX -> ASCIZ name of presentation file (no path, extension forced to
.PR2)
Return: ???
SeeAlso: AH=55h
----------1055------------------------------INT 10 - Show Partner F/X v3.6 - UNINSTALL
AH = 55h
Return: FXSHOW.EXE removed from memory
SeeAlso: AH=53h
--------V-105555----------------------------INT 10 - VIDEO - ATI EGA/VGA Wonder Super Switch - INSTALLATION CHECK
AX = 5555h
Return: AX = AAAAh
if installed
BX:CX -> ??? routine in SMS.COM resident portion
-> data area (see #00175) in VCONFIG
Program: Super Switch (SMS.COM) is a video mode switch program supplied with
ATI EGA Wonder. It also maps video mode 08h to 27h or 23h.
SeeAlso: INT 10/AH=00h,INT 14/AX=AA01h,INT 2F/AX=6400h
Index: screen saver;ATI Wonder SMS.COM
D:\D\inter61a\INTERRUP.A
Format of ATI Super Switch data area:
Offset Size Description (Table 00175)
00h DWORD original INT 09 vector
04h DWORD original INT 10 vector
08h DWORD original INT 1C vector
0Ch WORD screen saver state, 0=off, 1=on
0Eh WORD blanking interval in clock ticks
----------105555BXAAAA----------------------INT 10 - LIR - SET CONFIGURATION
AX = 5555h
BX = AAAAh
CL = new configuration flags (see #04118)
CH > 0 new video adapter configuration (see #04121)
= 0 do not update video adapter configuration
DL = new keyboard layout flags (see #04119)
DH = new alphabet flags (see #04120)
Return: AX = A55Ah if installed
Program: LIR is a DOS/Windows 3.xx codepage support package develoved by
LABAS u.a.b. It supports several screen and printer codepages as
well as various keyboard layouts used in Lithuania.
Download at: ftp://ftp.labas.com/pub/drivers/language/lir422.zip
-185-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
SeeAlso: AX=5555h/BX=BBBBh,INT 17/AX=5555h/BX=AAAAh
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Bitfields for LIR configuration flags:
Bit(s) Description (Table 04118)
7 program is active
6 ???
5-3 code page
2 Lithuanian???
1 Russian???
0 enable beeps
SeeAlso: #04119
Bitfields for LIR keyboard layout flags:
Bit(s) Description (Table 04119)
7-5 keyboard layout
100 QWERTY
010 Lithuanian AZERTY
001 Lithuanian ergonomic FZVPUJ
4-3 reserved (0)
2 Lithuanian keyboard???
1 Russian keyboard???
0 ???
SeeAlso: #04118,#04120
Bitfields for LIR Alphabet flags:
Bit(s) Description (Table 04120)
7-3 reserved (0)
2 Lithuanian alphabetic symbol table???
1 Russian alphabetic symbol table???
0 reserved (0)
SeeAlso: #04118,#04119,#04121
Bitfields for LIR video adapter configuration:
Bit(s) Description (Table 04121)
7 Hercules Graphics Card (HGC)
6-5 reserved (0)
4 VGA
3 MCGA
2 EGA
1 CGA
0 reserved (0)
-186-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Note: multiple bits may be set if more than one video adapter is installed
SeeAlso: #04118
----------105555BXBBBB----------------------INT 10 - LIR - GET CONFIGURATION
AX = 5555h
BX = BBBBh
Return: AX = magic signature A55Ah
BX = version number (BH = major version, BL = minor version),
e.g. BX = 0410h for LIR v4.10, or BX = 0422h for LIR v4.22)
CL = configuration flags (see #04118)
CH = video adapter configuration (see #04121)
DL = keyboard layout flags(see #04119)
DH = alphabet flags (see #04120)
SeeAlso: AX=5555h/BX=AAAAh,INT 17/AX=5555h/BX=BBBBh
--------V-105F00----------------------------INT 10 - Chips & Technologies Extended BIOS - RETURN CHIP INFORMATION
AX = 5F00h
Return: AL = 5Fh function supported
BL = chip type (see #00176)
BH = video memory size (see #00177)
CX = miscellaneous information (see #00178)
SeeAlso: AX=5F01h
Bitfields for Chips&Technologies chip type:
Bit(s) Description (Table 00176)
7-4 chip type
0000: 82c451
0001: 82c452 / 82c452A
0010: 82c455
0011: 82c453
0100: 82c450
0101: 82c456
0110: 82c457
0111: F65520
1000: F65530 / F65525
1001: F66510
1010: ???
1011: F64300 "Wingine DGX"
1100: F65535/F65545 ???
1101: F65540
1110: ???
-187-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
1111: ???
3-0 revision number
SeeAlso: #00177
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00177)
Values for Chips&Technologies video memory size:
00h 256KB
01h 512KB
02h 1MB
03h 2MB
SeeAlso: #00176
Bitfields for Chips&Technologies miscellaneous information:
Bit(s) Description (Table 00178)
0 DAC size (0=6-bit, 1=8-bit)
1 system type (0=PC/AT, 1=PS/2)
2 extended text modes supported by BIOS
3 reserved
4 extended graphics modes supported by BIOS
5 reserved
6 BIOS supports graphics cursor
7 BIOS supports anti-aliased font
8 BIOS supports pre-programmed emulation
9 BIOS supports auto emulation
10 BIOS supports variable mode set at cold boot
11 BIOS supports variable mode set on warm boot
12 BIOS supports emulation mode set at cold boot
13 BIOS supports emulation mode set on warm boot
14-15 reserved
--------V-105F00----------------------------INT 10 - VIDEO - Realtek RTVGA - RETURN CHIP VERSION
AX = 5F00h
Return: AH = 00h, if successful
AL = chip version (the same value that VTEST.EXE reads)
00h RTG3103???
01h RTG31030/RTG3105
02h RTG3106???
3Fh non-Realtek chip
BUG: in v3.C10, AX=5F00h on return due to improper stack restoration code
SeeAlso: AX=5F01h"RTVGA"
--------V-105F01-----------------------------188-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
INT 10 - Chips & Technologies Extended BIOS - SET PREPROGRAMMED EMULATION
AX = 5F01h
BL = emulation type (see #00179)
Return: AL = 5Fh if function supported
AH = status
00h unsuccessful
01h successful
SeeAlso: AX=5F00h,AX=5F02h,AH=FFh"Oak"
(Table 00179)
Values for Chips&Technologies emulation type:
00h,01h reserved
02h CGA
03h MDA
04h Hercules
05h EGA
06h VGA (disable emulation)
--------V-105F01----------------------------INT 10 - VIDEO - Realtek RTVGA - WRITE RTVGA BIOS STRING TO DESTINATION
AX = 5F01h
ES:DI -> zero-filled buffer for BIOS ID string
Return: AH = 00h if successful
ES:DI -> ASCII signature "REALTEK VGA BIOS Version 3C.10"
BUG: in v3.C10, AX=5F01h on return due to improper stack restoration code
SeeAlso: AX=5F00h"RTVGA",AX=5F02h"RTVGA"
--------V-105F02----------------------------INT 10 - Chips & Technologies Extended BIOS - AUTO EMULATION CONTROL
AX = 5F02h
BL = new state of autmatic emulation (00h enabled, 01h disabled)
Return: AL = 5Fh if function supported
AH = status
00h unsuccessful
01h successful
SeeAlso: AX=5F01h,AX=5F03h
--------V-105F02----------------------------INT 10 - Chips & Technologies '64300' BIOS - SET CLOCK
AX = 5F02h
BH = what to set
02h dot clock
BL = speed in MHz (12-99)
03h memory clock
-189-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
BL = speed in MHz (12-99)
FFh default dot and memory clocks
Return: AL = 5Fh if function supported
AH = status
00h unsuccessful
01h successful
SeeAlso: AX=5F00h"Chips",AX=5F03h"64300",AX=5F02h"65530"
--------V-105F02----------------------------INT 10 - Chips & Technologies '65530' BIOS - SET CLOCK
AX = 5F02h
BH = what to set
02h dot clock
BL = new clock speed (see #00180)
03h memory clock
BL = new clock speed (see #00180)
04h set power-down register
BL = new value for power-down register (bits 3-0 only)
06h (404 clock chip) set control register
BL = new vlaue for control register (bits 5-0 only)
06h (404A/B/B-ES clock chips) set control register PWRDN1
BL = new value for control register
07h (404A/B/B-ES clock chips) set control register PWRDN1
BL = new value for control register
FFh default dot and memory clocks
Return: AL = 5Fh if function supported
AH = status
00h unsuccessful
01h successful
SeeAlso: AX=5F01h,AX=5F02h"64300",AX=5FA0h,#00184
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00180)
Values for C&T '65530' BIOS clock speed:
00h 12 MHz
01h 14 MHz
02h 16 MHz
03h 18 MHz
04h 20 MHz
05h 25 MHz
06h 28 MHz
07h 32 MHz
08h 36 MHz
-190-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
09h 40 MHz
0Ah 45 MHz
0Bh 50 MHz
0Ch 56 MHz
0Dh 60 MHz
0Eh 65 MHz
0Fh 66 MHz
15h 34 MHz
--------V-105F02----------------------------INT 10 - VIDEO - Realtek RTVGA - RETURN RTVGA ON-BOARD MEMORY SIZE
AX = 5F02h
Return: AH = 00h, if successful
AL = on-board memory size
(00h = 256K, 01h = 512K, 02h = 768K, 03h = 1024K)
BUG: in v3.C10, AX=5F02h on return due to improper stack restoration code
SeeAlso: AX=5F01h"RTVGA",AX=5F03h"RTVGA"
--------V-105F03----------------------------INT 10 - VIDEO - Realtek RTVGA - SET ???
AX = 5F03h
BL = 0-3 (???)
Return: AH = 00h if successful
BUG: in v3.C10, AX=5F03h on return due to improper stack restoration code
SeeAlso: AX=5F02h"RTVGA"
--------V-105F03BL00------------------------INT 10 - Chips & Technologies Extended BIOS - SET POWER-ON DISPLAY MODE
AX = 5F03h
BL = 00h
CL = display mode
CH = mode (see #00181)
Return: AL = 5Fh if function supported
AH = status
00h unsuccessful
01h successful
SeeAlso: AX=5F02h,AX=5F03h/BL=01h"Chips",AX=5F90h
D:\D\inter61a\INTERRUP.A
Bitfields for Chips&Technologies display mode:
Bit(s) Description (Table 00181)
1-0 scanlines (00 = 200, 01 = 350, 10 = 400)
7 persistence (0 reset on next boot, 1 until changed)
--------V-105F03BH00------------------------INT 10 - Chips & Technologies '64300' BIOS - GET CLOCK SPEED
-191-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
AX = 5F03h
BH = 00h (get default memory clock)
Return: AL = 5Fh if function supported
AH = status
00h unsuccessful
01h successful
BL = clock speed in MHz
SeeAlso: AX=5F02h"64300",AX=5F04h"64300"
--------V-105F03BL01------------------------INT 10 - Chips & Technologies Extended BIOS - SET POWER-ON EMULATION MODE
AX = 5F03h
BL = 01h
CL = emulation mode (see #00181)
CH = permanence
bit 7 persistence (0 reset on next boot, 1 until changed)
Return: AL = 5Fh if function supported
AH = status
00h unsuccessful
01h successful
SeeAlso: AX=5F02h,AX=5F03h/BL=00h"Chips",AX=5F90h
--------V-105F04----------------------------INT 10 - Chips & Technologies '64300' BIOS - GET REFRESH RATE
AX = 5F04h
BL = video mode number
Return: AL = 5Fh if function supported
AH = status
00h unsuccessful
01h successful
BH = available refresh rates (see #00182)
BL = currently-set refresh rate (see #00182)
SeeAlso: AX=5F03h"64300",AX=5F05h"64300"
D:\D\inter61a\INTERRUP.A
Bitfields for C&T 64300 refresh rates:
Bit(s) Description (Table 00182)
5 75 Hz
4 72 Hz
3 70 Hz
2 60 Hz
1 56 Hz
0 interlaced
--------V-105F05-----------------------------192-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
INT 10 - Chips & Technologies '64300' BIOS - SET REFRESH RATE
AX = 5F05h
BL = video mode number
BH = refresh rate to set (see #00182)
bit 7: =0 program new clock and CRT parametes
=1 keep current parameters
Return: AL = 5Fh if function supported
AH = status
00h unsuccessful
01h successful
SeeAlso: AX=5F04h"64300"
--------V-105F06----------------------------INT 10 - Chips & Technologies '64300' BIOS - GET XRAM INFORMATION
AX = 5F06h
Return: AL = 5Fh if function supported
AH = status
00h unsuccessful
01h successful
BL = XRAM presence (00h no XRAM, 01h present)
SeeAlso: AX=5F05h,AX=5F08h
--------V-105F08----------------------------INT 10 - Chips & Technologies '64300' BIOS - SET LINEAR MEMORY START ADDRESS
AX = 5F08h
BX = desired start address in megabytes
Return: AL = 5Fh if function supported
AH = status
00h unsuccessful
01h successful
SeeAlso: AX=5F06h
--------V-105F10----------------------------INT 10 - Chips & Technologies '64300'/'65530' BIOS - GET LINEAR MEMORY INFO
AX = 5F10h
Return: AL = 5Fh if function supported
AH = status
00h unsuccessful
01h successful
BX:CX = linear memory base address
DX = virtual screen width offset (bytes)
SI;DI = linear memory size
SeeAlso: AX=5F08h,AX=5FA0h
--------V-105F50-----------------------------193-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
INT 10 - Chips & Technologies Extended BIOS - GET LAPTOP DISPLAY STATUS
AX = 5F50h
Return: DL = display status (see #00183)
Note: this call can be used on Toshiba laptops since ~1995 instead of
INT 42/AX=7503h which is no longer supported with the F655xx chips
SeeAlso: INT 42/AX=7503h
Bitfields for display status:
Bit(s) Description (Table 00183)
7-4 always 0 ???
3 1: both displays active (bit 1 also set)
2 1: normal (monochrome display only), 0: inverse or color
1 1: internal display active, 0: external only
0 always set ???
--------V-105F50----------------------------INT 10 - Chips & Technologies '65530' BIOS - GET 655xx INFORMATION
AX = 5F50h
Return: AL = 5Fh if function supported
AH = status
00h unsuccessful
01h successful
BX = width of flat panel in pixels
CX = height of flat panel in pixels
DX = F65520/525/530 status (see #00184)
SeeAlso: AX=5F51h,INT 15/AX=5F31h
Bitfields for C&T F65520/525/530 status:
Bit(s) Description (Table 00184)
15-0 reserved
6-5 type of clock chip
00 = 404
01 = 404A
10 = 404B ES
11 = 404B
4 accelerator enabled
3 both displays active
2 video polarity (1 = inverted)
1 output device
0 CRT
1 flat panel (LCD)
0 reserved
-194-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
--------V-105F51----------------------------INT 10 - Chips & Technologies Extended BIOS AX = 5F51h
BL = new active display
00h CRT
01h flat panel (LCD)
02h both simultaneously
BH = 01h to allow reprogramming the DAC
Return: AL = 5Fh if function supported
AH = status
00h unsuccessful
01h successful
SeeAlso: AX=5F50h,AX=5F53h
--------V-105F53----------------------------INT 10 - Chips & Technologies Extended BIOS AX = 5F53h
BL = new support state
00h disable buffer/accelerator
01h enable buffer/acelerator
Return: AL = 5Fh if function supported
AH = status
00h unsuccessful
01h successful
SeeAlso: AX=5F50h,AX=5F51h,AX=5F54h
--------V-105F54----------------------------INT 10 - Chips & Technologies Extended BIOS AX = 5F54h
BL = new state
00h on
01h off
Return: AL = 5Fh if function supported
AH = status
00h unsuccessful
01h successful
SeeAlso: AX=5F50h,AX=5F51h,AX=5F53h,AX=5F5Ah
--------V-105F5A----------------------------INT 10 - Chips & Technologies Extended BIOS AX = 5F5Ah
BL = new video polarity
00h normal
01h inverted
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
SWITCH DISPLAY DEVICE
EN/DISABLE ACCELERATOR SUPPORT
TURN FLAT PANEL ON/OFF
SET FLAT-PANEL VIDEO POLARITY
-195-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Return: AL = 5Fh if function supported
AH = status
00h unsuccessful
01h successful
SeeAlso: AX=5F50h,AX=5F54h
--------V-105F5C----------------------------INT 10 - Chips & Technologies Extended BIOS - SET VERTICAL COMPENSATION
AX = 5F5Ch
BL = type of vertical compensation to use
00h no compensation
01h automatic centering
02h set centering register
DX = centering value (bits 9-0 only)
03h non-automatic centering
04h set vertical line insertion register
DL = vertical line insertion (bits 3-0 only)
05h set alternate maximum scanline register
DL = alternate maximum scanline (bits 4-0 only)
06h enable text stretching, type 0
07h enable text stretching, type 1
08h enable text stretching, type 2
09h enable text stretching, type 3
0Ah disable text stretching
0Bh set vertical line replication register
DL = vertical line replication (bits 3-0 only)
0Ch enable graphics stretching, type 0
0Dh enable graphics stretching, type 1
0Eh disable vertical graphics stretching
0Fh disable all horizontal and vertical compensation
10h enable optimal compensation
11h disable optimal compensation
Return: AL = 5Fh if function supported
AH = status
00h unsuccessful
01h successful
SeeAlso: AX=5F50h,AX=5F5Eh,AX=5F5Fh
--------V-105F5E----------------------------INT 10 - Chips & Technologies Extended BIOS - EN/DISABLE TALL FONT LOADING
AX = 5F5Eh
BL = new state of tall-font loading
00h enable loading of 8x19/30/32 fonts
-196-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
01h disable loading of 8x19/30/32 fonts
Return: AL = 5Fh if function supported
AH = status
00h unsuccessful
01h successful
Note: when tall fonts are enabled, the fonts are stretched by duplicating
scan lines as appropriate to convert an 8x16 font to the proper
height (scan lines 1/9/12 [8x19] or 2-15 [8x30] or all [8x32])
SeeAlso: AX=5F5Ch,AX=5F5Fh
--------V-105F5F----------------------------INT 10 - Chips & Technologies Extended BIOS - HORIZONTAL COMPENSATION
AX = 5F5Fh
BL = horizontal compensation type
00h none
01h automatic centering
02h set centering register
DL = centering value
03h non-automatic centering
04h enable text compression (force 8xN fonts)
05h disable text compression (allow 9xN fonts)
06h enable auto doubling
07h disable auto doubling
0Fh disable all horizontal and vertical compensation
Return: AL = 5Fh if function supported
AH = status
00h unsuccessful
01h successful
SeeAlso: AX=5F50h,AX=5FA0h
--------V-105F90----------------------------INT 10 - Chips & Technologies Extended BIOS - GET SUPERVGA STATE BUFFER SIZE
AX = 5F90h
CX = state mask (see #00185)
Return: AL = 5Fh if function supported
BX = number of 64-byte blocks required
SeeAlso: AH=1Ch,AX=5F03h,AX=5F91h,AX=5F92h,AX=5FA0h
D:\D\inter61a\INTERRUP.A
Bitfields for Chips&Technologies state mask:
Bit(s) Description (Table 00185)
0 video hardware
1 BIOS data state
2 DAC state
-197-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
15 type (0 all state info, 1 SuperVGA state only)
--------V-105F91----------------------------INT 10 - Chips & Technologies Extended BIOS - SAVE SUPERVGA STATE
AX = 5F91h
CX = state mask (see #00185)
ES:BX -> save buffer
Return: AL = 5Fh if function supported
buffer at ES:BX filled
SeeAlso: AH=1Ch,AX=5F03h,AX=5F90h,AX=5F92h,AX=5FA1h
--------V-105F92----------------------------INT 10 - Chips & Technologies Extended BIOS - RESTORE SUPERVGA STATE
AX = 5F92h
CX = state mask (see #00185)
ES:BX -> previously-filled save buffer
Return: AL = 5Fh if function supported
SeeAlso: AH=1Ch,AX=5F03h,AX=5F90h,AX=5F92h,AX=5FA2h
--------V-105FA0----------------------------INT 10 - Chips & Technologies Wingine DGX - GET EXTENDED BIOS SAVE BUFFER SIZE
AX = 5FA0h
CX = state(s) to be saved (see #00186)
Return: AL = 5Fh if function supported
AH = status
00h unsuccessful
01h successful
BX = number of 64-byte blocks required for state
SeeAlso: AH=1Ch,AX=5FA1h,AX=5FA2h,AX=5F90h,AX=4F04h
D:\D\inter61a\INTERRUP.A
Bitfields for C&T BIOS save/restore state type:
Bit(s) Description (Table 00186)
0 video hardware
1 BIOS data
2 DAC and color registers
14 (65530 BIOS with AL=A1h only) clear emulation state
15 extended registers
SeeAlso: #00048,#00085
--------V-105FA1----------------------------INT 10 - Chips & Technologies Wingine DGX - SAVE VIDEO STATE
AX = 5FA1h
CX = state(s) to be saved (see #00186)
ES:BX -> buffer for state information
Return: AL = 5Fh if function supported
-198-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
AH = status
00h unsuccessful
01h successful
ES:BX buffer filled
SeeAlso: AH=1Ch,AX=5FA0h,AX=5FA2h,AX=5F91h
--------V-105FA2----------------------------INT 10 - Chips & Technologies Wingine DGX - RESTORE VIDEO STATE
AX = 5FA2h
CX = state(s) to be restored (see #00186)
ES:BX -> buffer containing previously-saved state information
Return: AL = 5Fh if function supported
AH = status
00h unsuccessful
01h successful
SeeAlso: AH=1Ch,AX=5FA0h,AX=5FA1h,AX=5F92h
--------V-1060-----------------------------------INT 10 - HUNTER 16 - SET GRAPHICS FONT
AH = 60h
AL = new font
bit 7
output characters in reverse video
bits 0-6 font number (see #00200 at AH=77h)
Return: BH = cell width
BL = cell height
Desc: select the font to use for output in mode 6; this can be used to mix
fonts on the screen
Note: the Husky Hunter 16 is an 8088-based ruggedized laptop. Other family
members are the Husky Hunter, Husky Hunter 16/80, and Husky Hawk.
SeeAlso: AH=04h"HUNTER",AH=73h"HUNTER",AH=77h"HUNTER"
--------V-1061-----------------------------------INT 10 - HUNTER 16 - MOVE CURSOR TO GRAPHICS CO-ORDINATES
AH = 61h
CX = column
DX = row
Return: nothing
Note: this function is only valid in graphics modes
SeeAlso: AH=62h
--------V-1062-----------------------------------INT 10 - HUNTER 16 - GET CURSOR POSITION IN GRAPHICS CO-ORDINATES
AH = 62h
Return: CX = column
DX = row
D:\D\inter61a\INTERRUP.A
-199-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Note: this function is only valid in graphics modes
SeeAlso: AH=61h
--------V-1063-----------------------------------INT 10 - HUNTER 16 - SET CONTRAST
AH = 63h
AL = contrast (0..127)
Return: nothing
Desc: set the LCD screen contrast to improve visibility
SeeAlso: AH=64h,AH=75h
--------V-1064-----------------------------------INT 10 - HUNTER 16 - SET BACKLIGHT LEVEL
AH = 64h
AL = level (0..15)
Return: nothing
Desc: set the LCD backlight level to improve visibility in bad lighting
SeeAlso: AH=63h,AH=65h,AH=74h,AH=78h"HUNTER",INT 15/AH=74h
--------V-106500---------------------------------INT 10 - HUNTER 16 - GET BACKLIGHT TIMEOUT
AX = 6500h
Return: BX = timeout in seconds (0-300)
Desc: returns the time after which the backlight will turn off
SeeAlso: AH=63h,AH=64h,AX=6501h,INT 15/AH=74h
--------V-106501---------------------------------INT 10 - HUNTER 16 - SET BACKLIGHT TIMEOUT
AX = 6501h
BX = timeout in seconds (0-300)
Return: nothing
Desc: set the idle time after which the backlight will turn off
SeeAlso: AH=64h,AX=6500h
--------V-1066-----------------------------------INT 10 - HUNTER 16 - SPLIT DISPLAY
AH = 66h
AL = control bits (see #00187)
BH = top row of lower section of LCD (0..7)
BL = top row of lower section of the virtual screen (0..24)
Return: nothing
Desc: split the LCD screen horizontally into two parts; each part may be
individually scrollable or fixed.
Note: the Hunter 16 has a 240x64 LCD display which serves as a window into
a 640x200 virtual screen
-200-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Bitfields for HUNTER 16 control bits:
Bit(s) Description (Table 00187)
0-1 01: no split, 10: allow split
2 allow scrolling the upper part
3 allow scrolling the lower part
--------V-106A00BX0000----------------------INT 10 - Direct Graphics Interface Standard (DGIS) - INQUIRE AVAILABLE DEVICES
AX = 6A00h
BX = 0000h
CX = 0000h
DX = buffer length (may be 0)
ES:DI -> buffer
Return: BX = number of bytes stored in buffer
CX = bytes required for all descriptions (0 if no DGIS)
Note: buffer contains descriptions and addresses of DGIS-compatible
display(s) and printer(s)
SeeAlso: AX=6A02h
--------V-106A01CX0000----------------------INT 10 - Direct Graphics Interface Standard (DGIS) - REDIRECT CHARACTER OUTPUT
AX = 6A01h
CX = 0000h
ES:DI = address of device to send INT 10 output to
Return: CX = 0000h output could not be redirected
else INT 10h output now routed to requested display
SeeAlso: AX=6A02h
--------V-106A02----------------------------INT 10 - DGIS - INQUIRE INT 10 OUTPUT DEVICE
AX = 6A02h
ES:DI = 0000h:0000h
Return: ES:DI = 0000h:0000h if current display is non-DGIS
else address of the current DGIS INT 10 display
SeeAlso: AX=6A00h,AX=6A01h
--------V-106D74----------------------------INT 10 - MTRFONTS - INSTALLATION CHECK
AX = 6D74h ('mt')
DS:0104h = signature "MtRfOnTs"
Return: AX = 4D54h ('MT') if installed
ES = PSP segment of resident code
Program: MTRFONTS is a shareware TSR (part of the MTR package) by Mechon Mamre
which provides Hebrew screen fonts
SeeAlso: INT 16/AX=6D74h"MTRTSR"
-201-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
--------V-106E00----------------------------INT 10 - Paradise VGA internal - GET ???
AX = 6E00h
Return: BX = 5744h ('WD') if supported
DH:AH:AL = last three ASCII digits of ROM serial number
CL = ???
CH = ???
SeeAlso: AX=6E04h,AX=6E05h
--------V-106E04----------------------------INT 10 - Paradise VGA internal - GET SCREEN SIZE AND ???
AX = 6E04h
Return: BX = screen width (columns)
CX = screen height (lines)
AH = ??? (05h or FFh)
AL = ??? (04h or video mode)
SeeAlso: AX=6E00h,AX=6E05h
--------V-106E05----------------------------INT 10 - Paradise VGA internal - SET MODE
AX = 6E05h
BL = mode
Return: nothing
Note: like AH=00h, AL=BL.
SeeAlso: AH=00h,AX=6E00h,AX=6E04h,AX=6F05h
--------V-106F00----------------------------INT 10 - HP Vectra EX-BIOS - INSTALLATION CHECK
AX = 6F00h
BX <> 4850h (usually set to 0000h for simplicity)
Return: BX = 4850h ('HP') indicates HP Extended BIOS video functions present
AX destroyed
SeeAlso: AX=6F00h"Video7",AX=6F01h,AX=6F02h,AX=6F03h,AX=6F04h,AX=6F05h
SeeAlso: INT 14/AX=6F00h,INT 16/AX=6F00h,INT 17/AX=6F00h,INT 33/AX=6F00h
--------V-106F00BX0000----------------------INT 10 - VIDEO - Video7 VGA,VEGA VGA - INSTALLATION CHECK
AX = 6F00h
BX = 0000h
Return: BX = 5637h ('V7') indicates Video7 VGA/VEGA VGA extensions are present
SeeAlso: AX=6F01h,AX=6F02h,AX=6F03h,AX=6F04h,AX=6F05h
--------V-106F01----------------------------INT 10 - VIDEO - Video7 VGA,VEGA VGA,HP EX-BIOS - GET MONITOR INFO
AX = 6F01h
Return: AL = monitor type code (HP,VEGA VGA only) (see #00188)
-202-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
AH = status register information (see #00189)
CL = current value of Extended Control register (HP Ext BIOS, and only
if AL=41h) (see #00190)
Notes: bits 0-3 are the same as the EGA/VGA status register bits 0-3
supported by original HP Vectra AT and by ES/QS/RS series Vectras
D:\D\inter61a\INTERRUP.A
(Table 00188)
Values for monitor type code (HP Extended BIOS):
00h non-HP card with ROM and possibly its own INT 10h driver
41h MultiMode video display adapter
42h-44h reserved
45h industry standard monochrome display adapter
46h industry standard color display adapter
51h reserved
Bitfields for status register information:
Bit(s) Description (Table 00189)
0 display enable
0 = display enabled
1 = vertical or horizontal retrace in progress
1 light pen flip flop set
2 light pen switch activated
3 vertical sync
4 monitor resolution
0 = high resolution (>200 lines)
1 = low resolution (<=200 lines)
5 display type (0 = color, 1 = monochrome)
6,7 diagnostic bits
Note: bits 0-3 are the same as the EGA/VGA status register bits 0-3
--------V-106F02----------------------------INT 10 - HP Vectra EX-BIOS - SET MONITOR INFO
AX = 6F02h
BL = new value for extended control register (see #00190)
Return: AX,BL destroyed
Notes: this function is only valid when an HP MultiMode Video Display Adapter
is installed
the Extended Control register is at I/O address 3DDh
SeeAlso: AX=6F01h,AX=6F03h
Bitfields for HP Vectra extended control register:
Bit(s) Description (Table 00190)
-203-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
0 screen resolution (0 = 200 lines, 1 = 400 lines)
1 underline enable (if set, 'blue' of fg color = underline)
2 font (0 = Standard-8, 1 = HP-Roman-8)
3 memory disabled for CPU access
4 allow access to full 32K memory instead of wrapping at 16K
5 select second 16K page instead of first
6,7 unused
--------V-106F03----------------------------INT 10 - HP Vectra EX-BIOS - MODIFY MONITOR INFO
AX = 6F03h
BH = exclude mask (set bits are not modified)
BL = new values for bits indicated by BH (see #00190)
Return: AX destroyed
Notes: this function is only valid when an HP MultiMode Video Display Adapter
is installed
supported by original HP Vectra AT and by ES/QS/RS series Vectras
SeeAlso: AX=6F01h,AX=6F02h
--------V-106F04----------------------------INT 10 - VIDEO - Video7 VGA,VEGA VGA,HP Vectra - GET MODE AND SCREEN RESOLUTION
AX = 6F04h
Return: AL = current video mode (see #00191)
BX = horizontal columns (text) or pixels (graphics)
CX = vertical columns (text) or pixels (graphics)
SeeAlso: AX=6F05h
--------V-106F05----------------------------INT 10 - VIDEO - Video7 VGA,VEGA EXTENDED EGA/VGA,HP Vectra - SET VIDEO MODE
AX = 6F05h
BL = mode (see #00191)
Return: AX,BL destroyed
Notes: also supported by the HP Vectra Extended BIOS on the original
HP Vectra AT and by ES/QS/RS series Vectras
on the HP Vectra, this function rather than AH=00h must be used to
return to an IBM-standard mode after setting an HP-specified mode
from 08h to 0Fh.
SeeAlso: AH=00h,AX=0070h,AX=007Eh,AX=6F04h
D:\D\inter61a\INTERRUP.A
(Table 00191)
Values for Video7/VEGA video mode:
text/ text pixel pixel colors disply scrn system
grph resol box resolution
pages addr
00h-13h = standard IBM modes (see #00010 at AH=00h)
-204-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
08h
09h
0Ah
0Bh
0Ch
0Dh
0Eh
0Fh
40h
41h
42h
43h
44h
45h
60h
61h
62h
63h
64h
65h
66h
67h
68h
69h
70h
71h
72h
73h
74h
75h
76h
77h
78h
79h
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
T 80x27
T 80x27
T 40x27
T 40x27
reserved
G
.
G
.
G
.
T 80x43
T 132x25
T 132x43
T 80x60
T 100x60
T 132x28
G
.
G
.
G
.
G
.
G
.
G
.
G
.
G
.
G
.
G
.
G
.
G
.
G
.
G
.
G
.
G
.
G
.
G
.
G
.
G
.
G
.
G
.
G
.
G
.
G
.
G
.
G
.
.
.
.
.
. mono
.
.
. mono
.
.
HP
.
640x400
.
320x400
.
320x400
8x8
.
.
8x14
.
.
8x8
.
.
8x8
.
.
8x8
.
.
8x8
.
.
.
752x410
.
720x540
.
720x540
.
800x600
.
800x600
.
1024x768
.
1024x768
.
1024x768
.
1024x768
.
640x400
.
640x400
.
640x480
.
640x480
.
720x540
.
720x540
.
800x600
.
800x600
.
752x410
.
720x540
.
800x600
.
1024x768
.
1024x768
.
1024x768
.
640x400
.
640x480
.
720x540
.
800x600
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
. . HP MultiMode Video
. . HP MultiMode Video
. . HP MultiMode Video
. . HP MultiMode Video
MultiMode Video
.
. . HP MultiMode Video
.
. . HP MultiMode Video
.
. . HP MultiMode Video
. . Video7/VEGA VGA
. . Video7/VEGA VGA
. . Video7/VEGA VGA
. . Video7/VEGA VGA
. . Video7/VEGA VGA
. . Video7/VEGA VGA
16
. . Video7 VGA, VEGA VGA
16
. . Video7 VGA, VEGA VGA
16
. . Northgate, Headland 1024i
16
. . Video7 VGA, VEGA Ext EGA
16
. . Headland 1024i
2
. . Video7 VGA
4
. . Video7 VGA
16
. . Video7 VGA, VEGA Ext EGA
16
. . Headland 1024i
256
. . Video7 VGA, VEGA Ext VGA
256
. . Northgate, Headland 1024i
256
. . Video7 VGA, VEGA Ext VGA
256
. . Headland 1024i
256
. . Video7 VGA, VEGA Ext VGA
256
. . Headland 1024i
256
. . Video7 VGA, VEGA Ext VGA
256
. . Headland 1024i
16gray
. . Video7 VGA, VEGA VGA
16gray
. . Video7 VGA, VEGA VGA
16gray
. . Video7 VGA
2gray
. . Video7 VGA
4gray
. . Video7 VGA
16gray
. . Video7 VGA
256gray
. . Video7 VGA
256gray
. . Video7 VGA
256gray
. . Video7 VGA
256gray
. . (future)
-205-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
SeeAlso: AH=00h,#00010,AX=0070h,#00011,AX=007Eh,AX=6F04h,#00083
Index: video modes;Video 7|video modes;VEGA|video modes;Headland
--------V-106F06----------------------------INT 10 - VIDEO - Video7 VGA,VEGA VGA - SELECT AUTOSWITCH MODE
AX = 6F06h
BL = Autoswitch mode select
00h select EGA/VGA-only modes
01h select Autoswitched VGA/EGA/CGA/MGA modes
02h select 'bootup' CGA/MGA modes
BH = enable/disable (00h enable, 01h = disable selection)
Return: nothing
--------V-106F07----------------------------INT 10 - VIDEO - Video7 VGA,VEGA VGA - GET VIDEO MEMORY CONFIGURATION
AX = 6F07h
Return: AL = 6Fh
AH = memory configuration
bits 0-6 = number of 256K blocks of video memory
bit 7
= DRAM/VRAM (0: DRAM, 1: VRAM)
BH = chip revision (SR8F) (S/C Chip in VEGA VGA)
BL = chip revision (SR8E) (G/A Chip in VEGA VGA)
CX = 0000h
SeeAlso: AH=12h/BL=10h
--------V-1070------------------------------INT 10 - VIDEO - TANDY 2000 only - GET ADDRESS OF VIDEO RAM
AH = 70h
Return: AX:BX -> WORD containing green plane's offset
AX:CX -> WORD containing green plane's segment
AX:DX -> WORD containing segment of red (offset 0) and blue (offset
4000) planes
SeeAlso: AH=71h
--------V-1070-----------------------------------INT 10 - HUNTER 16 - DRAW ELLIPSE/CIRCLE
AH = 70h
DS:BX -> control block (see #00192)
Return: nothing
Desc: Draws a circle or ellipse. Only valid in graphics modes.
Note: the Husky Hunter 16 is an 8088-based ruggedized laptop. Other family
members are the Husky Hunter, Husky Hunter 16/80, and Husky Hawk.
SeeAlso: AH=71h"HUNTER"
Format of HUNTER 16 control block:
-206-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
Offset Size Description (Table 00192)
00h WORD center X co-ordinate
02h BYTE center Y co-ordinate
03h WORD radius in pixels
05h BYTE color (00h white, 01h black, FFh invert)
06h BYTE aspect ratio x:x (1-127)
07h BYTE aspect ratio y:y (1-127)
--------V-107000BX0000----------------------INT 10 - Everex Extended Video BIOS - RETURN EMULATION STATUS
AX = 7000h
BX = 0000h
Return: AL = 70h if Trident-based Everex card
CL = monitor type (see #00193)
CH = feature bits (see #00194)
DX = video board info
bits 4-15: board ID model (see #00195)
bits 0-3: board ID revision
DI = BCD BIOS version number
SeeAlso: AX=5F01h,AH=FFh"Oak"
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00193)
Values for Everex monitor type:
00h mono
01h CGA
02h EGA
03h digital multifrequency
04h IBM PS/2
05h IBM 8514
06h SuperVGA
07h analog multifrequency
08h super multifrequency
Bitfields for Everex feature bits:
Bit(s) Description (Table 00194)
7-6 memory size
00 = 256K
01 = 512K
10 = 1024K
11 = 2048K
5 special oscillator present
4 VGA protect enabled
-207-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
0
6845 emulation
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00195)
Values for board model for Trident-based Everex cards:
0236h Ultragraphics II
0620h Vision VGA
0673h EVGA
0678h Viewpoint
--------V-107000BX0004----------------------INT 10 - Everex Extended Video BIOS - GET PAGING FUNCTION POINTER FOR CURR MODE
AX = 7000h
BX = 0004h
Return: ES:DI -> FAR paging function (call with DL = page to set)
Note: the word preceding ES:DI is the length of the function in bytes, and
the last byte of the function is a FAR return instruction.
SeeAlso: AX=4F05h,AX=7000h/BX=0000h,AX=7000h/BX=0005h
--------V-107000BX0005----------------------INT 10 - Everex Extended Video BIOS - GET SUPPORTED MODE INFO
AX = 7000h
BX = 0005h
CL = maximum number of modes to get info for
CH = mode type to get info for (see #00196)
DL = monitor type to get info for
ES:DI -> buffer for mode info (see #00197)
Return: CL = total number of modes fitting criteria
CH = size of each info record
SeeAlso: AX=7000h/BX=0000h,AX=7000h/BX=0004h
(Table 00196)
Values for Everex mode type:
00h all modes
01h monochrome text modes
02h color text modes
03h four-color CGA graphics modes
04h two-color CGA graphics modes
05h 16-color graphics modes
06h 256-color graphics modes
Format of Everex mode information record:
Offset Size Description (Table 00197)
00h BYTE mode number (bit 7 set if extended mode)
-208-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
01h BYTE mode type (see #00196)
02h BYTE info bits (see #00198)
03h BYTE font height
04h BYTE text columns on screen
05h BYTE text rows on screen
06h WORD number of scan lines
08h BYTE color information
bits 7-4 reserved
3-0 bits per pixel
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Bitfields for Everex info bits:
Bit(s) Description (Table 00198)
7,6 reserved
5 monochrome mode
4 interlaced display
3 requires special oscillator
2,1 memory required (00 = 256K, 01 = 512K, 10 = 1024K, 11 = 2048K)
0 reserved
--------V-1071------------------------------INT 10 - VIDEO - TANDY 2000 only - GET ADDRESS OF INCRAM
AH = 71h
Return: AX:BX -> WORD containing segment address of INCRAM
AX:CX -> WORD containing offset of INCRAM
SeeAlso: AH=70h"TANDY"
--------V-1071-----------------------------------INT 10 - HUNTER 16 - DRAW LINE/BOX
AH = 71h
DS:BX -> control block (see #00199)
Return: nothing
Desc: Draws a line or box. Only valid in graphics modes.
SeeAlso: AH=70h"HUNTER"
Format of HUNTER 16 control block:
Offset Size Description (Table 00199)
00h WORD left edge X co-ordinate
02h BYTE lower edge Y co-ordinate
03h WORD right edge X co-ordinate
05h BYTE upper edge Y co-ordinate
06h BYTE color (00h white, 01h black, FFh invert)
07h BYTE type (00h line, 01h box)
08h BYTE if non-zero (and type is BOX) fill with color
-209-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
--------V-1072------------------------------INT 10 - VIDEO - TANDY 2000 only - SCROLL RIGHT PART OR ALL OF SCREEN
AH = 72h
AL = number of columns to shift scroll area, 00h to clear entire area
BH = new attributes for blanked columns at left
CH,CL = row, column of upper left corner of scroll area
DH,DL = row, column of lower right corner of scroll area
Return: nothing
SeeAlso: AH=06h,AH=07h,AH=73h"TANDY",INT 15/AH=12h/BH=05h
--------V-1072-----------------------------------INT 10 - HUNTER 16 - SELECT TEXT-MODE INVERSE VIDEO MECHANISM
AH = 72h
AL = mechanism to use
00h do not use inverse video
01h emulate MDA. Display attribute 07h is normal video and 70h is
inverse video.
02h use inverse video if background is non-black.
03h use inverse video for high intensity text.
04h use inverse video for text with background intensity greater
than foreground intensity.
05h use inverse video for text with background color other than
black or high intensity foreground.
Return: nothing
SeeAlso: AH=70h"HUNTER",AH=71h"HUNTER"
--------V-1073------------------------------INT 10 - VIDEO - TANDY 2000 only - SCROLL LEFT PART OR ALL OF SCREEN
AH = 73h
AL = number of columns to shift scroll area, 00h to clear entire area
BH = new attributes for blanked columns at right
CH,CL = row, column of upper left corner of scroll area
DH,DL = row, column of lower right corner of scroll area
Return: nothing
SeeAlso: AH=06h,AH=07h,AH=72h"TANDY",INT 15/AH=12h/BH=05h
--------V-1073-----------------------------------INT 10 - HUNTER 16 - SELECT TEXT FONT
AH = 73h
AL = new font
00h 7x7 in a 8x8 cell
01h 5x7 in a 6x8 cell
06h 3x5 in a 4x6 cell
Return: BH = cell width
-210-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
BL = cell height
SeeAlso: AH=60h"HUNTER",AH=77h"HUNTER"
--------V-1074-----------------------------------INT 10 - HUNTER 16 - SET LCD WINDOWS POSITION
AH = 74h
DH = row (0..24)
DL = column (0..79)
Return: nothing
Desc: set the position in the virtual screen being displayed in the LCD
screen. If Split Screen (INT 10/AH=66h) is used, this call sets the
position for the window which has the cursor.
SeeAlso: AH=66h"HUNTER",AH=75h,AH=76h
--------V-1075-----------------------------------INT 10 - HUNTER 16 - SET ZOOM
AH = 75h
AL = new Zoom state (00h off, nonzero on)
Return: nothing
SeeAlso: AH=74h,AH=76h
--------V-1076-----------------------------------INT 10 - HUNTER 16 - LOOKING KEYS
AH = 76h
AL = action
00h home the window
01h move up one line
02h move down one line
03h move left one character
04h move right one character
05h flip window to other side of virtual screen
Return: nothing
Desc: moves the displayed screen around the virtual screen
SeeAlso: AH=74h,AH=75h
--------V-1077-----------------------------------INT 10 - HUNTER 16 - GET GRAPHICS FONT
AH = 77h
Return: AL = font number (see #00200)
SeeAlso: AH=60h"HUNTER",AH=73h"HUNTER"
D:\D\inter61a\INTERRUP.A
(Table
Values
00h
01h
00200)
for HUNTER 16 graphics font number:
7x7 in a 8x8 cell
5x7 in a 6x8 cell
-211-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
02h
7x9 in a 8x10 cell
03h 14x9 in a 16x10 cell
04h
7x18 in a 8x20 cell
05h 14x18 in a 16x20 cell
06h
3x5 in a 4x6 cell
Note: size is X * Y
--------V-1078-----------------------------------INT 10 - HUNTER 16 - TURN BACKLIGHT ON/OFF
AH = 78h
AL = new state of backlight (00h on, 01h off)
Return: nothing
SeeAlso: AH=64h,INT 15/AH=74h
--------V-107F------------------------------INT 10 - Paradise SVGA - WD90C24 INSTALLATION CHECK
AH = 7Fh
Return: AX = 1234h if WD90C24 chip installed
--------V-107F00----------------------------INT 10 - SOLLEX SuperVGA - GET EXTENSIONS INFO
AX = 7F00h
Return: AL <> 7Fh if not supported
AL = 7Fh if supported
AH = status
00h successful
ES:DI -> info structure (see #00201)
01h failed
Program: the SOLLEX (Smos videO controLLer EXtensions) SuperVGA functions are
an extension to the VESA SuperVGA BIOS Extensions (see AX=4F00h) by
Seiko Epson Corporation intended to provided a standardized interface
to SuperVGA functionality not addressed by the VESA standard
SeeAlso: AX=4F00h
D:\D\inter61a\INTERRUP.A
Format of SOLLEX SuperVGA info structure:
Offset Size Description (Table 00201)
00h DWORD pointer to VESA function dispatch table
04h DWORD pointer to SOLLEX function dispatch table
08h DWORD pointer to VESA SuperVGA info (see #00077 at AX=4F00h)
0Ch DWORD pointer to mode info structure table, consisting of
alternating ResInfo (see #00202) and VESA mode information
(see #00079 at AX=4F01h) blocks, terminated with an FFFFh word
10h DWORD pointer to font info structure table (see #00203)
14h WORD high resolution crystal frequency in Hz (0000h = not present)
-212-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
16h DWORD pointer to ASCIZ ID string
1Ah DWORD pointer to timeout reset table
array of bytes, each a multiple of the minimum time increment
1Eh WORD minimum time increment in timer ticks
20h BYTE inverse options supported
bit 0: inverse supported
bits 1-7: reserved
21h BYTE normal color value
22h BYTE inverse color value
23h WORD port to be accessed for normal/inverse settings
25h WORD type of interface chip (currently undefined)
27h WORD program operational mode
bits 1-0: 00 no preference
01 terse (minimum detail in program messages)
10 verbose
11 use menus if supported, verbose mode otherwise
bits 7-2: reserved
29h WORD SOLLEX specification version
2Bh WORD version of VESA/SOLLEX implementation
2Dh DWORD offset to relocatable portion of SOLLEX extensions (for CONFIG)
2Eh DWORD offset to unused section of the extensions ROM
31h 16 BYTEs reserved
Note: all DWORD pointers initially require segment fixups; if the segment
is 0000h, it should be changed to the returned ES, otherwise it
may be assumed to be correct
D:\D\inter61a\INTERRUP.A
Format of SOLLEX SuperVGA ResInfo:
Offset Size Description (Table 00202)
00h WORD 16-bit mode number
02h WORD adapter type (00h VGA, 01h EGA, 02h CGA, 03h MDA)
04h WORD display info (see #00206)
06h DWORD pointer to video parameter table
0Ah BYTE replacement entry in master Video Parameter
0Bh BYTE mode requested for mode set by BIOS
0Ch DWORD pointer to LoadReg table
10h BYTE index into table of clock values (see #00204)
SeeAlso: #00201
Format of SOLLEX SuperVGA font info table [array] entry:
Offset Size Description (Table 00203)
00h BYTE required font height
-213-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
01h BYTE parameter to load text mode font
02h BYTE parameter to load graphics mode font
SeeAlso: #00201
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
(Table 00204)
Values for SOLLEX SuperVGA clock value index:
00h 25 MHz
01h 28 MHz
02h PCLK
03h 31.5 MHz (VESA 640x480)
04h reserved
05h 16 MHz (EGA)
06h PCLK
07h 24 MHz (EGA)
08h 25 MHz
09h 28 MHz
0Ah 36 MHz
0Bh 45 MHz (for 1024x768)
0Ch 80 MHz
0Dh 40 MHz
0Eh 65 MHz
0Fh
1 MHz (for powerdown)
SeeAlso: #00201
--------V-107F00BX4000----------------------INT 10 - Diamond Stealth 24 - GET S3 INFORMATION BLOCK
AX = 7F00h
BX = 4000h
Return: AX = 007Fh if supported
DX:BX -> DAC set mode routine
SeeAlso: AX=7F00h/BX=4001h,AX=7F00h/BX=4002h,#00732 at INT 1A/AX=B102h
--------V-107F00BX4001----------------------INT 10 - Diamond Stealth 24 - GET LINEAR ADDRESS
AX = 7F00h
BX = 4001h
Return: AX = 007Fh if supported
CX = current linear address base (high word)
SeeAlso: AX=7F00h/BX=4000h,AX=7F00h/BX=4002h
--------V-107F00BX4002----------------------INT 10 - Diamond Stealth 24 - SET LINEAR ADDRESS
AX = 7F00h
BX = 4002h
-214-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
CX = new linear address base (high word)
Return: AX = 007Fh if supported
SeeAlso: AX=7F00h/BX=4000h,AX=7F00h/BX=4001h
--------V-107F01BL00------------------------INT 10 - SOLLEX SuperVGA - ADAPTER CONTROL - SET ADAPTER
AX = 7F01h
BL = 00h
CX = adapter request (see #00205)
Return: AL <> 7Fh if not supported
AL = 7Fh if supported
AH = status
00h successful
01h failed
Note: initializes video hardware to a particular standard
SeeAlso: AX=7F00h"SOLLEX",AX=7F01h/BL=01h,AX=7F01h/BL=02h
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Bitfields for SOLLEX SuperVGA adapter request:
Bit(s) Description (Table 00205)
1-0 adapter type (00 VGA, 01 EGA, 10 CGA, 11 MDA)
2 reserved
4-3 change displays (00 none, 01 analog 10 digital 11 panel)
6-5 desired monitor sense (01 color, 10 mono, 11=8514)
7 lock override
8 alternate adapter mode
15-9 reserved
--------V-107F01BL01------------------------INT 10 - SOLLEX SuperVGA - ADAPTER CONTROL - GET ADAPTER
AX = 7F01h
BL = 01h
Return: AL <> 7Fh if not supported
AL = 7Fh if supported
AH = status
00h successful
01h failed
BX = adapter type (see #00205)
DX = display type (see #00206)
SeeAlso: AX=7F00h"SOLLEX",AX=7F01h/BL=00h,AX=7F01h/BL=02h
Bitfields for SOLLEX SuperVGA display type:
Bit(s) Description (Table 00206)
15-9 reserved
-215-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
8 alternate display active
7 Enhanced Color Display monitor active
6 multi-frequency digital monitor active
5 PS/2-type monitor active
4 plasma/electroluminescent panel active
3 LCD panel active
2 multi-frequency analog monitor active
1-0 monitor sense (00 none, 01 color, 10 mono, 11=8514)
--------V-107F01BL02------------------------INT 10 - SOLLEX SuperVGA - ADAPTER CONTROL - DETERMINE ADAPTER SUPPORT
AX = 7F01h
BL = 02h
CX = adapter request (see #00205)
Return: AL <> 7Fh if not supported
AL = 7Fh if supported
AH = status
00h requested setting can successfully be made
01h requested setting not available in this configuration
SeeAlso: AX=7F00h"SOLLEX",AX=7F01h/BL=00h
--------V-107F02BL00------------------------INT 10 - SOLLEX SuperVGA - DISPLAY OUTPUT CONTROL - SET DISPLAY OUTPUT
AX = 7F02h
BL = 00h
CX = display output setting (see #00207)
Return: AL <> 7Fh if not supported
AL = 7Fh if supported
AH = status
00h successful
01h failed
SeeAlso: AX=7F00h"SOLLEX",AX=7F02h/BL=00h
D:\D\inter61a\INTERRUP.A
Bitfields for SOLLEX SuperVGA display output setting:
Bit(s) Description (Table 00207)
0 CRTC control in 2,1 valid
1 enable digital output
2 enable analog output
3 panel control in 5,4 valid
4 enable LCD output
5 enable plasma/EL output
6 inverse control in 7 valid
7 0=normal, 1=inverse
-216-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
15-8 reserved
--------V-107F02BL01------------------------INT 10 - SOLLEX SuperVGA - DISPLAY OUTPUT CONTROL - GET DISPLAY OUTPUT
AX = 7F02h
BL = 01h
Return: AL <> 7Fh if not supported
AL = 7Fh if supported
AH = status
00h successful
BX = display output setting (see #00207)
CX = displays attached (see #00208)
01h failed
SeeAlso: AX=7F00h"SOLLEX",AX=7F02h/BL=00h
D:\D\inter61a\INTERRUP.A
Bitfields for SOLLEX SuperVGA displays attached:
Bit(s) Description (Table 00208)
0 PS/2 display on analog output
1 multi-frequency monitor on analog output
2 LCD panel attached
3 plasma/electroluminescent panel attached
4 multi-frequency monitor on digital output
5 Enhanced Color Display attached to digital outpt
6 alternate display
15-7 reserved
--------V-107F03BL00------------------------INT 10 - SOLLEX SuperVGA - VIDEO SUPPORT CONTROL - GET SUPPORT INFO
AX = 7F03h
BL = 00h
CX = support type
0000h VGA, 0001h EGA, 0002h CGA, 0003h MDA, 0004h extensions,
0005h-0012h reserved for SOLLEX, 0013h Hercules,
0014h-001Fh reserved for SOLLEX, 0020h-00FFh reserved for OEM
Return: AL <> 7Fh if not supported
AL = 7Fh if supported
AH = status
00h successful
CX = size of video support code
DX = segment of physical video support (0000h if no ROM)
ES = segment of active video support
ES:DI -> information block (DI = 0000h if none available)
01h failed
-217-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
SeeAlso: AX=7F03h/BL=01h
--------V-107F03BL01------------------------INT 10 - SOLLEX SuperVGA - VIDEO SUPPORT CONTROL - INITIALIZE VIDEO SUPPORT
AX = 7F03h
BL = 01h
CX = support request
ES = segment of support code
Return: AL <> 7Fh if not supported
AL = 7Fh if supported
AH = status
00h successful
01h failed
Note: initializes the indicated video support by calling ES:0003h; this
function may be used to switch the active video support back to
ROM after AX=7F03h/BL=02h
SeeAlso: AX=7F03h/BL=00h
--------V-107F03BL02------------------------INT 10 - SOLLEX SuperVGA - VIDEO SUPPORT CONTROL - GO RAM RESIDENT
AX = 7F03h
BL = 02h
CX = support request
ES = destination segment
Return: AL <> 7Fh if not supported
AL = 7Fh if supported
AH = status
00h successful
01h failed
SeeAlso: AX=7F00h"SOLLEX",AX=7F03h/BL=01h
--------V-107F04BL00------------------------INT 10 - SOLLEX SuperVGA - POWER CONTROL - SET POWER STATE
AX = 7F04h
BL = 00h
CX = new power state
Return: AL <> 7Fh if not supported
AL = 7Fh if supported
AH = status
00h successful
01h failed
Note: higher values progressively reduce the operations available on the
video adapter while yielding increasing power savings
SeeAlso: AX=7F00h"SOLLEX",AX=7F04h/BL=01h
-218-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
--------V-107F04BL01------------------------INT 10 - SOLLEX SuperVGA - POWER CONTROL - GET POWER STATE
AX = 7F04h
BL = 01h
Return: AL <> 7Fh if not supported
AL = 7Fh if supported
AH = status
00h successful
CX = current power state
DX = maximum state
01h failed
SeeAlso: AX=7F00h"SOLLEX",AX=7F04h/BL=00h
--------V-107F04BL02------------------------INT 10 - SOLLEX SuperVGA - POWER CONTROL - SET TIMEOUT RESET
AX = 7F04h
BL = 02h
CX = timeout reset
Return: AL <> 7Fh if not supported
AL = 7Fh if supported
AH = status
00h successful
01h failed
SeeAlso: AX=7F00h"SOLLEX",AX=7F04h/BL=03h
--------V-107F04BL03------------------------INT 10 - SOLLEX SuperVGA - POWER CONTROL - GET TIMEOUT RESET
AX = 7F04h
BL = 03h
Return: AL <> 7Fh if not supported
AL = 7Fh if supported
AH = status
00h successful
BX = time increment
CX = current timeout reset
DX = maximum timeout reset
ES:DI -> timeout reset table (array of bytes)
01h failed
Note: the timeout period is computed as (BYTE ES:[DI+CX]) * BX timer ticks
SeeAlso: AX=7F00h"SOLLEX",AX=7F04h/BL=02h
--------V-107F05----------------------------INT 10 - SOLLEX SuperVGA - LOAD REGISTER
AX = 7F05h
-219-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
ES:DI -> register value table (see #00209)
Return: AL <> 7Fh if not supported
AL = 7Fh if supported
AH = status
00h successful
01h failed
SeeAlso: AH=F1h,AH=F3h,AH=F5h
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Format of SOLLEX SuperVGA register value table:
Offset Size Description (Table 00209)
00h WORD base I/O register (FFFFh = end of list)
02h 2N BYTEs pairs of values to be written to the base I/O register as an
index value and the following register as a data byte
2N+2 WORD FFFFh (end of data list)
... (repeats until FFFFh base address)
--------V-107F06----------------------------INT 10 - SOLLEX SuperVGA - MULTIPLE FONT CONTROL
AX = 7F06h
BL = subfunction
00h set multiple font state
CX = new state (00h off, 01h on)
01h get multiple font state
Return: BL = current state (00h off, 01h on)
Return: AL <> 7Fh if not supported
AL = 7Fh if supported
AH = status
00h successful
01h failed
SeeAlso: AX=1100h,AX=1103h
--------V-107F07----------------------------INT 10 - SOLLEX SuperVGA - FILL VIDEO RAM
AX = 7F07h
BL = how much to fill
00h regen size
01h all video memory
CX = pattern to write (normally 0720h for text modes and 0000h for gr)
Return: AL <> 7Fh if not supported
AL = 7Fh if supported
AH = status
00h successful
01h failed
-220-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
SeeAlso: AH=06h
--------A-1080------------------------------INT 10 - CU Writer v1.4 - GET OPTION
AH = 80h
AL = desired option
Return: ???
Program: CU Writer is a public-domain Thai-English word processor from
Chulalongkorn University, Bangkok
SeeAlso: AH=81h"CU Writer"
--------Q-1080--DX4456----------------------INT 10 U - VIDEO - DESQview 2.0x only - internal - SET ??? HANDLER
AH = 80h
DX = 4456h ('DV')
ES:DI -> FAR subroutine to be called on ???
Return: DS = segment of DESQview data structure for video buffer
Note: this function is probably meant for internal use only, due to the magic
value required in DX
the subroutine seems to be called when the DESQview menu is accessed;
on entry, AL = 03h or 04h
--------A-1081------------------------------INT 10 - CU Writer v1.4 - SET OPTION
AH = 81h
???
Return: ???
SeeAlso: AH=80h"CU Writer"
--------Q-1081--DX4456----------------------INT 10 U - VIDEO - DESQview 2.0x only - internal - GET ???
AH = 81h
DX = 4456h ('DV')
Return: ES = segment of DESQview data structure for video buffer
BYTE ES:[0] = current window number in DV 2.0x
Note: this function is probably meant for internal use only, due to the magic
value required in DX
SeeAlso: AH=82h"DESQview"
--------Q-1082--DX4456----------------------INT 10 U - VIDEO - DESQview 2.0x only - internal - GET CURRENT WINDOW INFO
AH = 82h
DX = 4456h ('DV')
Return: DS = segment in DESQview for data structure
in DV 2.00,
BYTE DS:[0] = window number
-221-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
WORD DS:[1] = segment of other data structure
WORD DS:[3] = segment of window's object handle
ES = segment of DESQview data structure for video buffer
AL = current window number
AH = ???
BL = direct screen writes
00h program does not do direct writes
01h program does direct writes, so shadow buffer not usable
BH = ???
CL = current video mode
CH = ???
Note: this function is probably meant for internal use only, due to the magic
value required in DX
SeeAlso: AH=81h"DESQview"
--------J-108200----------------------------INT 10 - VIDEO - AX PC - GET/SET SCROLL MODE
AX = 8200h
BL = new scroll mode or FFh to get current mode
00h dynamic, 01h software
Return: AL = scroll mode (current mode if BL=FFh, previous mode otherwise)
SeeAlso: AH=06h,AH=07h
--------J-108300----------------------------INT 10 - VIDEO - AX PC - GET VIDEO RAM ADDRESS
AX = 8300h
Return: AX = offset of video RAM
ES:BX -> virtual text RAM buffer
SeeAlso: AX=5201h
----------1086------------------------------INT 10 - ???
AH = 86h
Note: called by Diamond Stealth64 Video STLTH64.VXD
SeeAlso: INT 2F/AX=4021h
--------N-108B------------------------------INT 10 - Alloy MW386 - FORCE WORKSTATION SCREEN UPDATE
AH = 8Bh
Return: nothing
SeeAlso: AH=92h,AH=93h
--------N-1090------------------------------INT 10 - Alloy MW386 - GET PHYSICAL WORKSTATION DISPLAY MODE
AH = 90h
Return: AL = current video mode (see #00010 at AH=00h)
D:\D\inter61a\INTERRUP.A
-222-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
SeeAlso: AH=91h
--------N-1091------------------------------INT 10 - Alloy MW386 - GET PHYSICAL WORKSTATION ADAPTER TYPE
AH = 91h
Return: AL = video adapter type (see #00210)
Note: types less than 80h do not imply that the current user is on the host
SeeAlso: AH=90h
(Table 00210)
Values for Alloy MW386 video adapter type:
00h monochrome
01h Hercules monochrome graphics
02h CGA
03h EGA
04h VGA
80h monochrome text terminal
81h Hercules graphics terminal
82h color graphics terminal
--------N-1092------------------------------INT 10 - Alloy MW386 - INHIBIT WORKSTATION SCREEN UPDATES
AH = 92h
Return: nothing
Note: the terminal will be updated even when screen updates are inhibited if
TTY output is used
SeeAlso: AH=8Bh
--------N-1093------------------------------INT 10 - Alloy MW386 - REDRAW SCREEN
AH = 93h
Return: nothing
SeeAlso: AH=8Bh,AH=FFh
--------V-109508----------------------------INT 10 - VHRBIOS.SYS - ???
AX = 9508h
Return: ???
Program: VHRBIOS.SYS is a driver for the Micro Display Systems "TheGenius"
black&white A4/portrait monitor
SeeAlso: AH=96h"VHRBIOS.SYS",AH=F0h"VHRBIOS.SYS"
--------V-1096------------------------------INT 10 - VHRBIOS.SYS - GET OTHER DISPLAY INFO
AH = 96h
Return: AL = display type (see AH=1Ah)
-223-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
AH = ??? (possibly related to Micro Channel support)
Program: VHRBIOS.SYS is a driver for the Micro Display Systems "TheGenius"
black&white A4/portrait monitor
Desc: returns info on any non-Genius video adapter in the system
SeeAlso: AX=9508h"VHRBIOS.SYS",AH=F0h"VHRBIOS.SYS"
--------A-10A0------------------------------INT 10 - CU Writer v1.4 - SET PIXEL WRITE MODE
AH = A0h
???
Return: ???
Program: CU Writer is a public-domain Thai-English word processor from
Chulalongkorn University, Bangkok
SeeAlso: AH=80h"CU Writer",AH=B0h
--------p-10A000----------------------------INT 10 - ATI BIOS Extensions - ???
AX = A000h
CL = ??? (bits 2-0 may not be 000)
CH = ??? (81h or ???)
DX = segment of ??? (if CH=81h)
???
Return: AX = ???
Program: the ATI BIOS extensions are supported by ATI graphics cards containing
the Mach64 or newer graphics chips (Rage Pro, Rage 128, etc.)
SeeAlso: AX=4F10h/BL=00h,AX=A001h
----------10A001----------------------------INT 10 - ATI Mach64 BIOS - ???
AX = A001h
CL = ??? flags
???
Return: AH = status
00h successful
01h failed
???
SeeAlso: AX=A000h,AX=A002h
----------10A002----------------------------INT 10 - ATI Mach64 BIOS - ???
AX = A002h
CL = ??? (bits 2-0 may not be 000)
CH = ??? (81h or ???)
DX = segment of ??? (if CH=81h)
???
D:\D\inter61a\INTERRUP.A
-224-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Return: AH = status
00h successful
01h failed
???
Note: executes AX=A000h, then AX=A001h if A000h was successful
SeeAlso: AX=A000h,AX=A001h
----------10A003----------------------------INT 10 - ATI Mach64 BIOS - ???
AX = A003h
BX = ???
???
Return: AH = status (00h successful)
???
SeeAlso: AX=A000h,AX=A002h
--------V-10A004----------------------------INT 10 - PhoenixVIEW/LC - VIDEO DISPLAY TYPE
AX = A004h
???
Return: ???
Desc: configure display parameters
SeeAlso: AX=A01Bh"PhoenixVIEW/LC"
----------10A004----------------------------INT 10 - ATI Mach64 BIOS - ???
AX = A004h
BX = video mode??? (0000-00FFh)
DX = ??? (sent to some port [66ECh???] one bit at a time, high to low)
???
Return: AH = status
00h successful
01h failed
???
SeeAlso: AX=A000h,AX=A002h
----------10A005----------------------------INT 10 - ATI Mach64 BIOS - ???
AX = A005h
CL = ??? flags (bits 0,2, others?)
???
Return: AH = status
00h successful
01h failed
???
-225-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
SeeAlso: AX=A000h,AX=A002h
----------10A006----------------------------INT 10 - ATI Mach64 BIOS - ???
AX = A006h
???
Return: AH = status
00h successful
01h failed
???
SeeAlso: AX=A000h,AX=A002h
----------10A007----------------------------INT 10 - ATI Mach64 BIOS - GET ???
AX = A007h
Return: AH = 00h (successful)
AL = ??? (00h)
BX = ??? (15A0h in examined BIOS)
DX = segment of BIOS
SeeAlso: AX=A000h,AX=A002h
----------10A008----------------------------INT 10 - ATI Mach64 BIOS - GET ??? SIZE
AX = A008h
CL = ??? flags
???
Return: AH = 00h (successful)
BX = size of ??? (0046h if CL bit 0 clear on entry)
SeeAlso: AX=A000h,AX=A009h
----------10A009----------------------------INT 10 - ATI Mach64 BIOS - GET ???
AX = A009h
DX:BX -> buffer for ???
CL = ??? flags
???
Return: AH = status
00h successful
DX:BX buffer filled
01h failed
???
SeeAlso: AX=A000h,AX=A008h
----------10A00A----------------------------INT 10 - ATI Mach64 BIOS - GET ???
AX = A00Ah
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
-226-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
Return: AH = 00h (successful)
AL = ??? (01h)
BX = ??? (5938h)
CX = ??? (595Eh)
DX = segment of BIOS
SeeAlso: AX=A000h,AX=A002h
----------10A00B----------------------------INT 10 - ATI Mach64 BIOS - ???
AX = A00Bh
BX = ???
CL = ??? flags
???
Return: AH = status
00h successful
01h failed
???
SeeAlso: AX=A000h,AX=A002h
--------p-10A00C----------------------------INT 10 - ATI Mach64 BIOS - SET SLEEP MODE
AX = A00Ch
CL = new state
00h normal operation
01h standby
02h suspend
03h off
Return: AH = status
00h successful
01h failed
Note: CL bit 2 affects values written to video card's ports
SeeAlso: AX=A000h,AX=A00Dh,AX=4F00h,AX=4F10h/BL=01h
----------10A00D----------------------------INT 10 - ATI Mach64 BIOS - GET SLEEP MODE
AX = A00Dh
Return: AH = 00h (successful)
CL = current power mode
00h normal operation
01h standby
02h suspend
03h off
SeeAlso: AX=A00Ch,AX=4F10h/BL=02h
SeeAlso: AX=A00Ch,AX=A00Dh"Rage128"AX=4F10h/BL=02h
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
-227-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
--------V-10A00D----------------------------INT 10 - ATI Rage128 BIOS - GET ???
AX = A00Dh
BL = subfunction
00h ???
01h ???
02h ???
03h ???
DX:DI -> buffer for results
???
Return: AH = status
00h successful
01h failed
???
SeeAlso: AX=A000h,AX=A00Dh"Mach64",AX=A015h
----------10A00E----------------------------INT 10 - ATI Mach64 BIOS - SET ???
AX = A00Eh
CL = ??? (00h-03h)
Return: AH = status
00h successful
01h failed
Notes: CL zero/nonzero are treated differently
NOP in All-in-Wonder 128 BIOS
SeeAlso: AX=A000h,AX=A00Fh
----------10A00F----------------------------INT 10 - ATI Mach64 BIOS - GET ???
AX = A00Fh
Return: AH = 00h (successful)
CL = ??? (00h-03h, read from PORT 42ECh)
Note: NOP in All-in-Wonder 128 BIOS
SeeAlso: AX=A000h,AX=A00Eh
----------10A010----------------------------INT 10 - ATI Mach64 BIOS - ???
AX = A010h
CL = ??? (80h/other)
???
Return: AH = status
00h successful
01h failed
???
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
-228-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Note: NOP in All-in-Wonder 128 BIOS
SeeAlso: AX=A000h,AX=A002h
----------10A011----------------------------INT 10 - ATI Mach64 BIOS - GET ???
AX = A011h
Return: AH = 00h (successful)
BL = ??? (1Fh)
BH = ??? (0Fh)
CL = ??? (00h)
CH = ??? (0Fh)
DX = ??? (00FFh)
Note: NOP in All-in-Wonder 128 BIOS
SeeAlso: AX=A000h,AX=A010h
--------V-10A012----------------------------INT 10 - ATI Mach64 BIOS - GET ???
AX = A012h
Return: AH = 00h (successful)
AL = ??? (00h)
BX = ??? (0000h)
CX = ??? (0000h)
DX = ??? (02ECh)
Note: NOP in All-in-Wonder 128 BIOS
SeeAlso: AX=A000h,AX=A002h
--------V-10A013----------------------------INT 10 - ATI Mach64 BIOS - ???
AX = A013h
???
Return: AH = status
00h successful
01h failed
???
Note: not implemented in examined Mach64 BIOS, always returns AH=01h; NOP in
examined All-in-Wonder 128 BIOS
SeeAlso: AX=A000h,AX=A002h
--------V-10A014----------------------------INT 10 - ATI Rage128 BIOS - ???
AX = A014h
CH = ??? (bits 0,1,4)
???
Return: AH = status
00h successful
-229-
Saturday, January 08, 2011 11:31 AM
D:\D\inter61a\INTERRUP.A
01h failed
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
???
SeeAlso: AX=A000h,AX=A015h
--------V-10A015----------------------------INT 10 - ATI Rage128 BIOS - GET/SET ???
AX = A015h
CH = subfunction
00h get ???
01h set ???
CL = ??? (only bits 0,1 used on All-in-Wonder 128)
other NOP
Return: AH = status
00h successful
01h failed
???
SeeAlso: AX=A014h,AX=A017h
--------V-10A016----------------------------INT 10 - ATI Rage128 BIOS - NOP
AX = A016h
Return: nothing
SeeAlso: AX=A000h,AX=A017h
--------V-10A017----------------------------INT 10 - ATI Rage128 BIOS - ???
AX = A017h
???
Return: AH = status
00h successful
01h failed
???
SeeAlso: AX=A014h,AX=A015h
--------V-10A01B----------------------------INT 10 - PhoenixVIEW/LC - CRT MONITOR DETECTION
AX = A01Bh
???
Return: ???
Desc: determine whether an external display is currently attached
SeeAlso: AX=A004h"PhoenixVIEW/LC"
--------U-10AA------------------------------INT 10 OU - Player's Tool 3.0 - UNINSTALL
AH = AAh
Return: ???
-230-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
Note: this call has been removed in PT 3.996b
Program: Player's Tool is a game cheater by Dmitry Yakunin & Andy Robinson
SeeAlso: AH=ABh,INT 2F/AH=AAh
--------U-10AB------------------------------INT 10 OU - Player's Tool 3.0 - INSTALLATION CHECK
AH = ABh
Return: BH = FFh
???
Note: this call has been removed in PT 3.996b
SeeAlso: AH=AAh,INT 2F/AH=ABh
--------A-10B0------------------------------INT 10 - CU Writer v1.4 - PUT PIXEL
AH = B0h
???
Return: ???
SeeAlso: AH=A0h"CU Writer",AH=B1h,AH=B2h,AH=B3h,AH=B4h,AH=B5h,AH=D0h
--------A-10B1------------------------------INT 10 - CU Writer v1.4 - MOVE TO
AH = B1h
???
Return: ???
SeeAlso: AH=B0h,AH=B2h,AH=C0h"CU Writer"
--------A-10B2------------------------------INT 10 - CU Writer v1.4 - DRAW LINE TO
AH = B2h
???
Return: ???
SeeAlso: AH=B0h,AH=B1h,AH=B3h,AH=B4h,AH=B5h
--------A-10B3------------------------------INT 10 - CU Writer v1.4 - FLOOD FILL
AH = B3h
???
Return: ???
SeeAlso: AH=B2h,AH=B5h
--------A-10B4------------------------------INT 10 - CU Writer v1.4 - DRAW RECTANGLE
AH = B4h
???
Return: ???
SeeAlso: AH=B0h,AH=B2h,AH=B3h,AH=B5h
--------A-10B5-------------------------------231-
Saturday, January 08, 2011 11:31 AM
Generated by Foxit PDF Creator © Foxit Software
D:\D\inter61a\INTERRUP.A
http://www.foxitsoftware.com For evaluation only.
INT 10 - CU Writer v1.4 - DRAW FILLED RECTANGLE
AH = B5h
???
Return: ???
SeeAlso: AH=B0h,AH=B2h,AH=B3h,AH=B4h
--------V-10BB------------------------------INT 10 U - Doorway - SET BIOS/DIRECT REDIRECTION
AH = BBh
AL = new redirection mode
00h BIOS (hook and redirect INT 10h,etc.)
01h DIRECT (scan video memory for changes)
Return: ???
SeeAlso: INT 16/AH=67h"Doorway"
--------V-10BD44----------------------------INT 10 U - Compaq QVision - ???
AX = BD44h
???
Return: ???
Note: called by Compaq's MTX132.COM, which places the QVision in 132-column
mode
--------!---Section--------------------------
-232-
Saturday, January 08, 2011 11:31 AM