Compaq 6715b - Notebook PC Specifications

HP Compaq 6715b and 6715s
Notebook PC, HP Compaq 6710b and
6710s Notebook PC
Maintenance and Service Guide
© Copyright 2007, 2008, 2011 HewlettPackard Development Company, L.P.
AMD, Sempron, Turion, and combinations
thereof, are trademarks of Advanced Micro
Devices, Inc. Bluetooth is a trademark
owned by its proprietor and used by
Hewlett-Packard Company under license.
Intel and Core are trademarks or registered
trademarks of Intel Corporation or its
subsidiaries in the United States and other
countries. Java is a US trademark of Sun
Microsystems, Inc. Microsoft, Windows, and
Windows Vista are either trademarks or
registered trademarks of Microsoft
Corporation in the United States and/or
other countries. SD Logo is a trademark of
its proprietor.
The information contained herein is subject
to change without notice. The only
warranties for HP products and services are
set forth in the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.
Fourth Edition: May 2011
First Edition: March 2007
Document Part Number: 443119-004
Safety warning notice
WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not
place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a
hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft
surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to
contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer
and the AC adapter comply with the user-accessible surface temperature limits defined by the
International Standard for Safety of Information Technology Equipment (IEC 60950).
iii
iv
Safety warning notice
Table of contents
1 Product description ........................................................................................................... 1
2 External component identification ................................................................................... 13
Top components ..................................................................................................................... 13
Buttons, switches, and fingerprint reader .................................................................... 13
Keys ...................................................................................................................... 15
Lights ..................................................................................................................... 16
TouchPad ............................................................................................................... 17
Front components ................................................................................................................... 18
Left-side components ............................................................................................................... 19
Rear components ................................................................................................................... 20
Right-side components ............................................................................................................ 21
Bottom components ................................................................................................................ 22
3 Illustrated parts catalog .................................................................................................. 23
Serial number location ............................................................................................................ 23
Computer major components ................................................................................................... 24
Plastics Kit ............................................................................................................................. 33
Cable Kit .............................................................................................................................. 34
Mass storage devices ............................................................................................................. 35
Miscellaneous parts ................................................................................................................ 36
Sequential part number listing .................................................................................................. 37
4 Removal and replacement procedures ............................................................................ 45
Preliminary replacement requirements ....................................................................................... 45
Tools required ......................................................................................................... 45
Service considerations ............................................................................................. 45
Plastic parts ............................................................................................. 45
Cables and connectors ............................................................................. 46
Drive handling ......................................................................................... 46
Grounding guidelines .............................................................................................. 47
v
Electrostatic discharge damage .................................................................. 47
Packaging and transporting guidelines ........................................ 48
Workstation guidelines .............................................................. 48
Equipment guidelines ................................................................. 49
Unknown user password .......................................................................................... 50
Component replacement procedures ........................................................................................ 51
Serial number ......................................................................................................... 51
Battery ................................................................................................................... 52
SIM ....................................................................................................................... 53
Display inverter ....................................................................................................... 54
Hard drive ............................................................................................................. 56
Computer feet ......................................................................................................... 58
Bluetooth module .................................................................................................... 58
Expansion memory module ....................................................................................... 60
WLAN module ........................................................................................................ 62
Optical drive .......................................................................................................... 66
Keyboard ............................................................................................................... 68
Internal memory module ........................................................................................... 70
RTC battery ............................................................................................................ 71
WWAN module ..................................................................................................... 72
Switch cover ........................................................................................................... 74
Fan ....................................................................................................................... 75
Heat sink ................................................................................................................ 76
Processor ............................................................................................................... 78
Display assembly .................................................................................................... 80
Top cover ............................................................................................................... 85
Speaker assembly ................................................................................................... 89
USB/Media Card Reader board ............................................................................... 90
System board ......................................................................................................... 92
PC Card/audio board assembly ............................................................................... 95
Modem module ....................................................................................................... 97
SIM slot board ........................................................................................................ 99
5 Computer Setup ............................................................................................................ 101
Starting Computer Setup ....................................................................................................... 101
Using Computer Setup .......................................................................................................... 102
Navigating and selecting in Computer Setup ............................................................ 102
Restoring factory settings in Computer Setup ............................................................. 102
Computer Setup menus ......................................................................................................... 103
File menu ............................................................................................................. 103
Security menu ....................................................................................................... 104
vi
Diagnostics menu .................................................................................................. 104
System Configuration menu .................................................................................... 105
6 Specifications ............................................................................................................... 108
Computer specifications ........................................................................................................ 108
15.4-inch, WSXGA display specifications ............................................................................... 109
15.4-inch, WXGA display specifications ................................................................................. 110
Hard drive specifications ...................................................................................................... 111
Primary 6-cell, Li-ion battery specifications ............................................................................... 112
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive specifications .............................. 113
DVD/CD-RW Combo Drive specifications ............................................................................... 115
DVD-ROM drive ................................................................................................................... 116
System DMA specifications .................................................................................................... 117
System interrupt specifications ............................................................................................... 118
System I/O address specifications .......................................................................................... 119
System memory map specifications ......................................................................................... 121
7 Screw listing ................................................................................................................. 122
Torx T8M2.5×7.0 screw ....................................................................................................... 122
Phillips PM2.0×5.0 captive screw .......................................................................................... 123
Phillips PM2.5×13.0 captive screw ........................................................................................ 124
Phillips PM3.0×3.0 screw ..................................................................................................... 125
Phillips PM2.5×3.0 screw ..................................................................................................... 126
Torx T8M2.5×9.0 screw ....................................................................................................... 128
Phillips PM2.0×3.0 screw ..................................................................................................... 130
Black Phillips PM2.5×8.0 captive screw .................................................................................. 131
Silver Phillips PM2.5×8.0 captive screw ................................................................................. 132
Phillips PM2.5×8.0 screw ..................................................................................................... 133
Phillips PM2.0×6.0 screw ..................................................................................................... 134
Torx T8M2.5×6.0 screw ....................................................................................................... 135
Hex HM5.0×9.0 screw lock .................................................................................................. 136
Phillips PM2.5×5.0 screw ..................................................................................................... 137
Phillips PM2.5×3.0 broad-head screw .................................................................................... 139
8 Backup and recovery .................................................................................................... 140
Backup and recovery in Windows Vista .................................................................................. 140
Creating recovery discs ......................................................................................... 140
Backing up your information ................................................................................... 140
When to back up ................................................................................... 141
Backup suggestions ................................................................................ 141
vii
Backing up specific files or folders ............................................................ 142
Backing up the entire hard drive .............................................................. 142
Creating recovery points ......................................................................... 143
Scheduling backups ................................................................................ 143
Performing a recovery ............................................................................................ 143
Performing a recovery from the recovery discs ........................................... 144
Performing a recovery from the hard drive ................................................. 144
Initiating a recovery in Windows ............................................... 145
Initiating a recovery from the hard drive recovery partition ........... 145
Backup and recovery in Windows XP ..................................................................................... 146
Creating recovery discs ......................................................................................... 146
Backing up your information ................................................................................... 146
When to back up ................................................................................... 147
Backup suggestions ................................................................................ 147
Backing up specific files or folders ............................................................ 147
Backing up the entire hard drive .............................................................. 148
Creating recovery points ......................................................................... 149
Scheduling backups ................................................................................ 149
Performing a recovery ............................................................................................ 149
Performing a recovery from the recovery discs ........................................... 150
Performing a recovery from the hard drive ................................................. 150
Initiating a recovery in Windows ............................................... 151
Initiating a recovery from the hard drive recovery partition ........... 151
9 Connector pin assignments ........................................................................................... 152
Audio-out (headphone) ......................................................................................................... 152
Audio-in (microphone) .......................................................................................................... 152
External monitor ................................................................................................................... 153
RJ-11 (modem) ..................................................................................................................... 154
RJ-45 (network) .................................................................................................................... 154
S-Video-out .......................................................................................................................... 155
Universal Serial Bus .............................................................................................................. 155
10 Power cord set requirements ...................................................................................... 156
Requirements for all countries and regions ............................................................................... 156
Requirements for specific countries and regions ....................................................................... 157
11 Recycling .................................................................................................................... 158
Battery ................................................................................................................................ 158
Display ............................................................................................................................... 158
viii
Index ............................................................................................................................... 164
ix
x
1
Product description
Category
Description
HP Compaq
6715s
Notebook PC
HP Compaq
6715b
Notebook PC
without
WWAN
HP Compaq
6715b
Notebook PC
with WWAN
Processors
AMD Turion™ 64 Mobile
Technology processors:
√
√
√
√
√
√
√
√
√
√
√
√
●
TL-64 (dual-core) 2.2-GHz processor
with 1 MB of L2 cache
●
MK-38 (single-core) 2.2-GHz
processor with 512 KB of L2 cache
●
TL-60 (dual-core) 2.0-GHz processor
with 1 MB of L2 cache
●
TL-56 (dual-core) 1.8-GHz processor
with 1 MB of L2 cache
●
TL-52 (dual-core) 1.6-GHz processor
with 1 MB of L2 cache
●
TL-50 (dual-core) 1.6-GHz processor
with 1 MB of L2 cache
Mobile AMD Sempron™ processors:
Chipset
Graphics
●
3800+ 2.2-GHz processor with 256
KB of L2 cache
●
3600+ 2.0-GHz processor with 256
KB of L2 cache
●
3500+ 1.8-GHz processor with 512
KB of L2 cache
●
3400+ 1.8-GHz processor with 256
KB of L2 cache
●
Northbridge: RS690T
●
Southbridge: SB600
Unified Memory Architecture (UMA),
integrated with shared video memory
1
Category
Description
Panels
●
15.4-inch, WSXGA+ with WWAN
and WLAN antenna transceivers and
cables
√
●
15.4-inch, WXGA with WWAN and
WLAN antenna transceivers and
cables
√
●
15.4-inch, WXGA, BrightView with
WLAN antenna transceivers and
cables
√
√
●
15.4-inch, WSXGA+ with WLAN
antenna transceivers and cables
√
√
●
15.4-inch, WXGA with WLAN
antenna transceivers and cables
√
√
●
Support privacy film
√
√
√
●
Two SODIMM slots, both customeraccessible/upgradable (memory slot
under the keyboard must be
populated first)
√
√
√
●
DDRII PC2-5300 (667-MHz)
●
Supports dual-channel memory
Memory
Supports the following configurations:
2
●
4096 MB total system memory (2048
MB × 2, dual-channel)
●
2048 MB total system memory (2048
MB × 1)
●
2048 MB total system memory (1024
MB × 2, dual-channel)
●
1024 MB total system memory (512
MB × 2, dual-channel)
●
1024 MB total system memory (1024
MB × 1)
●
512 MB total system memory (512
MB × 1)
Chapter 1 Product description
HP Compaq
6715s
Notebook PC
HP Compaq
6715b
Notebook PC
without
WWAN
HP Compaq
6715b
Notebook PC
with WWAN
Category
Description
HP Compaq
6715s
Notebook PC
HP Compaq
6715b
Notebook PC
without
WWAN
HP Compaq
6715b
Notebook PC
with WWAN
Hard drives
●
Supports all 9.5-mm, 2.5-inch hard
drives
√
√
√
●
Serial ATA
√
√
√
The following hard drives are available:
Optical drives
●
160-GB, 5400-rpm
●
120-GB, 5400-rpm
●
80-GB, 7200- and 5400-rpm
●
12.7-mm tray load
●
Fixed, no modular requirements (1screw removal)
Supports all common optical formats
including the following:
●
DVD±RW and CD-RW Super Multi
Double-Layer Combo Drive with
Lightscribe
●
DVD±RW and CD-RW Super Multi
Double-Layer Combo Drive
●
DVD/CD-RW Combo Drive
●
DVD-ROM drive
Diskette drive
Supports external USB drive only
√
√
√
Audio
●
Azalia
√
√
√
●
Stereo speakers
●
Integrated monoaural microphone
●
Headphone and microphone jacks
●
56K data/fax modem (MDC1.5)
√
√
√
●
Modem cable included in Brazil, the
Czech Republic, France, Greece,
Hungary, Israel, Latin America,
Poland, Russia, Saudi Arabia,
Slovakia, Slovenia, South Africa,
Turkey, and the United Kingdom.
●
Integrated Broadcom 5787
10/100/1000 LAN
√
√
●
Integrated Broadcom 5906 10/100
LAN
Modem
Ethernet
√
3
Category
Wireless
Description
HP Compaq
6715s
Notebook PC
HP Compaq
6715b
Notebook PC
without
WWAN
HP Compaq
6715b
Notebook PC
with WWAN
●
S4/S5 wake on LAN (on AC power
only)
√
√
√
●
Network interface card (NIC) power
down
√
√
√
√
√
Integrated wireless options by way
of wireless module
Wireless local area network
(WLAN) options:
●
Broadcom 802.11a/b/g/n
●
Broadcom 802.11a/b/g
√
√
√
●
Broadcom 802.11b/g
√
√
√
●
Option for no WLAN
√
√
Wireless wide area network
(WWAN) options:
●
Evolution-data optimized (EVDO)
WWAN module
√
●
High-speed downlink packet access
(HSPDA) WWAN module
√
●
Subscriber identity module (SIM)
√
Wireless personal area network
(WPAN) options:
External
media card
Ports
4
√
√
√
√
√
√
●
Bluetooth® 2.0 module + Blueflame
module
●
Supports no WPAN option
●
One Type I/II PC Card slot, 16-bit
PCMCIA and 32-bit CardBus
●
Media Card Reader (MS Duo
adapters, plus SD, MMC, MS,
MSPro, and xD)
√
√
●
1394a port
√
√
●
Docking connector
√
√
●
Headphone connector
√
√
√
●
Microphone connector
√
√
√
●
Primary battery connector
√
√
√
●
RJ-11 modem port
√
√
√
Chapter 1 Product description
Category
Description
HP Compaq
6715s
Notebook PC
HP Compaq
6715b
Notebook PC
without
WWAN
HP Compaq
6715b
Notebook PC
with WWAN
●
RJ-45 Ethernet port
√
√
√
●
S-Video-out connector
√
√
●
Smart AC adapter connector
√
√
√
●
Travel battery connector
√
√
√
●
USB ports (4)
√
√
●
USB ports (2)
√
●
VGA port (Dsub 15-pin) supporting
1600 × 1200 external resolution @
75 Hz, hot plug/unplug, and auto
detect
√
√
√
Docking
Docking support
√
√
Keyboard/
pointing
devices
●
Spill-resistant keyboard with
embedded numeric keypad,
TouchPad, and fingerprint reader
√
√
●
Spill-resistant keyboard with
embedded numeric keypad and
TouchPad
√
●
Two-way scrolling
√
√
√
●
Windows Vista™ hardware Start
button
√
√
√
√
√
√
√
√
Power
requirements
Primary batteries:
●
6-cell, 2.55-Ah Li-ion battery (55
Whr)
●
6-cell, 2.20-Ah Li-ion battery (47
Whr)
Travel batteries:
●
12-cell Li-ion battery
●
8-cell Li-ion battery
AC adapter:
Security
●
90-watt
●
Localized cable plug support
●
3-wire plug with ground pin
●
Supports multipin AC connector)
●
Fingerprint reader
5
Category
Operating
system
Description
HP Compaq
6715s
Notebook PC
HP Compaq
6715b
Notebook PC
without
WWAN
HP Compaq
6715b
Notebook PC
with WWAN
√
√
●
HP 3D DriveGuard
●
HP DriveGuard
√
●
Security cable slot
√
√
√
●
Smart card reader/bezel snap-in
√
√
√
●
Trusted platform module (TPM) 1.2 on
system board
√
√
Preinstalled:
●
Windows Vista Home Basic
√
√
√
●
Windows Vista Business 32/64
√
√
√
●
FreeDOS
√
√
√
●
Windows® XP Professional
√
√
√
√
√
√
√
√
√
√
√
√
Certified: SuSe Linux Enterprise Desktop
(SLED) 10
√
Supported:
Serviceability
6
●
Windows Vista Enterprise
●
Windows XP Professional
End-user replaceable parts:
●
AC adapter
●
Hard drive
●
Memory module
●
Optical drive
●
Primary battery
●
WLAN module
●
WWAN module
Chapter 1 Product description
Category
Description
HP Compaq
6710s
Notebook PC
HP Compaq
6710b
Notebook PC
without
WWAN
HP Compaq
6710b
Notebook PC
with WWAN
Processors
Intel® Core™ Duo processors:
√
√
√
√
√
√
√
√
√
Chipset
●
T7700 2.4-GHz processor with 800MHz Front Side Bus (FSB) and 4 MB
of L2 cache
●
T7500 2.2-GHz processor with 800MHz FSB and 4 MB of L2 cache
●
T7300 2.0-GHz processor with 800MHz FSB and 4 MB of L2 cache
●
T7100 1.8-GHz processor with 800MHz FSB and 2 MB of L2 cache
●
Northbridge: Intel GM965 with 800MHz FSB
●
Southbridge: ICH8M
Graphics
Unified Memory Architecture (UMA),
integrated with shared video memory
Panels
●
15.4-inch, WSXGA+ with WLAN
and WWAN antenna transceivers
and cables
√
●
15.4-inch, WXGA with WLAN and
WWAN antenna transceivers and
cables
√
●
15.4-inch, WSXGA+ with WLAN
antenna transceivers and cables
√
√
●
15.4-inch, BrightView, WXGA with
WLAN antenna transceivers and
cables
√
√
●
15.4-inch, WXGA with WLAN
antenna transceivers and cables
√
√
●
Support privacy film
√
√
√
7
Category
Description
HP Compaq
6710s
Notebook PC
HP Compaq
6710b
Notebook PC
without
WWAN
HP Compaq
6710b
Notebook PC
with WWAN
Memory
●
Two SODIMM slots, both customer
accessible/upgradable (memory slot
under the keyboard must be
populated first)
√
√
√
●
DDRII PC2-5300 (667-MHz)
●
Supports dual-channel memory
√
√
√
Supports the following configurations:
Hard drives
●
4096 MB total system memory (2048
MB × 2, dual-channel)
●
2048 MB total system memory (2048
MB × 1)
●
2048 MB total system memory (1024
MB × 2, dual-channel)
●
1024 MB total system memory (512
MB × 2, dual-channel)
●
1024 MB total system memory (1024
MB × 1)
●
512 MB total system memory (512
MB × 1)
●
Supports all 9.5-mm, 2.5-inch hard
drives
●
Serial ATA
The following hard drives are available:
8
●
160-GB, 5400-rpm
●
120-GB, 5400-rpm
●
80-GB, 7200- and 5400-rpm
Chapter 1 Product description
Category
Description
HP Compaq
6710s
Notebook PC
HP Compaq
6710b
Notebook PC
without
WWAN
HP Compaq
6710b
Notebook PC
with WWAN
Optical drives
●
12.7-mm tray load
√
√
√
●
Fixed, no modular requirements (1screw removal)
Supports all common optical formats
including the following:
●
DVD±RW and CD-RW Super Multi
Double-Layer Combo Drive with
Lightscribe
●
DVD±RW and CD-RW Super Multi
Double-Layer Combo Drive
●
DVD/CD-RW Combo Drive
●
DVD-ROM drive
Diskette drive
Supports external USB drive only
√
√
√
Audio
●
Azalia
√
√
√
●
Stereo speakers
●
Integrated monoaural microphone
●
Headphone and microphone jacks
●
56K data/fax modem (MDC1.5)
√
√
√
●
Modem cable included in Brazil, the
Czech Republic, France, Greece,
Hungary, Israel, Latin America,
Poland, Russia, Saudi Arabia,
Slovakia, Slovenia, South Africa,
Turkey, and the United Kingdom.
●
Integrated Broadcom 5787
10/100/1000 LAN
√
√
●
Integrated Broadcom 5906 10/100
LAN
√
●
S4/S5 wake on LAN (on AC power
only)
√
√
√
●
Network interface card (NIC) power
down
√
√
√
√
√
Modem
Ethernet
Wireless
Integrated wireless options by way
of wireless module
Wireless local area network
(WLAN) options:
●
Broadcom 802.11a/b/g/n
9
Category
Description
HP Compaq
6710s
Notebook PC
HP Compaq
6710b
Notebook PC
without
WWAN
HP Compaq
6710b
Notebook PC
with WWAN
●
Broadcom 802.11a/b/g
√
√
√
●
Broadcom 802.11b/g
√
√
√
●
Option for no WLAN
√
√
Wireless wide area network
(WWAN) options:
●
Evolution-data optimized (EVDO)
WWAN module
√
●
High-speed downlink packet access
(HSPDA) WWAN module
√
●
Subscriber identity module (SIM)
√
Wireless personal area network
(WPAN) options:
External
media card
Ports
10
√
√
√
√
√
√
●
Bluetooth® 2.0 module + Blueflame
module
●
Supports no WPAN option
●
One Type I/II PC Card slot, 16-bit
PCMCIA and 32-bit CardBus
●
Media Card Reader (MS Duo
adapters, plus SD, MMC, MS,
MSPro, and xD)
√
√
●
1394a port
√
√
●
Docking connector
√
√
●
Headphone connector
√
√
√
●
Microphone connector
√
√
√
●
Primary battery connector
√
√
√
●
RJ-11 modem port
√
√
√
●
RJ-45 Ethernet port
√
√
√
●
S-Video-out connector
√
√
●
Smart AC adapter connector
√
√
√
●
Travel battery connector
√
√
√
●
USB ports (4)
√
√
●
USB ports (2)
Chapter 1 Product description
√
Category
Description
HP Compaq
6710s
Notebook PC
HP Compaq
6710b
Notebook PC
without
WWAN
HP Compaq
6710b
Notebook PC
with WWAN
●
√
√
√
VGA port (Dsub 15-pin) supporting
1600 × 1200 external resolution @
75 Hz, hot plug/unplug, and auto
detect
Docking
Docking support
√
√
Keyboard/
pointing
devices
●
Spill-resistant keyboard with
embedded numeric keypad,
TouchPad, and fingerprint reader
√
√
●
Spill-resistant keyboard with
embedded numeric keypad and
TouchPad
√
●
Two-way scrolling
√
√
√
●
Windows Vista™ hardware Start
button
√
√
√
√
√
√
Power
requirements
Primary batteries:
●
6-cell, 2.55-Ah Li-ion battery (55
Whr)
●
6-cell, 2.20-Ah Li-ion battery (47
Whr)
Travel batteries:
●
12-cell Li-ion battery
●
8-cell Li-ion battery
AC adapter:
Security
●
90-watt
●
Localized cable plug support
●
3-wire plug with ground pin
●
Supports multipin AC connector
●
Fingerprint reader
√
√
●
HP 3D DriveGuard
√
√
●
HP DriveGuard
√
●
Security cable slot
√
√
√
●
Smart card reader/bezel snap-in
√
√
√
●
Trusted platform module (TPM) 1.2 on
system board
√
√
11
Category
Description
Operating
system
Preinstalled:
HP Compaq
6710s
Notebook PC
HP Compaq
6710b
Notebook PC
without
WWAN
HP Compaq
6710b
Notebook PC
with WWAN
●
Windows Vista Home Basic
√
√
√
●
Windows Vista Business 32/64
√
√
√
●
FreeDOS
√
√
√
●
Windows® XP Professional
√
√
√
√
√
√
√
√
Certified: SuSe Linux Enterprise Desktop
(SLED) 10
√
Supported:
Serviceability
12
●
Windows Vista Enterprise
●
Windows XP Professional
End-user replaceable parts:
●
AC adapter
●
Hard drive
●
Memory module
●
Optical drive
●
Primary battery
●
WLAN module
●
WWAN module
Chapter 1 Product description
√
√
2
External component identification
Top components
Buttons, switches, and fingerprint reader
Top components
13
Item
Component
Function
(1)
Power button
●
When the computer is off, press the button to turn on the
computer.
●
When the computer is on, press the button to shut down
the computer.
●
When the computer is in the Sleep state (Windows Vista)
or in Standby (Windows XP), press the button briefly to exit
Sleep or Standby.
●
When the computer is in Hibernation, press the button
briefly to exit Hibernation.
If the computer has stopped responding and Windows®
shutdown procedures are ineffective, press and hold the power
button for at least 5 seconds to turn off the computer.
To learn more about power settings, follow these steps:
●
In Windows Vista, select Start > Control Panel >
System and Maintenance > Power Options.
●
In Windows XP, select Start > Control Panel >
Performance and Maintenance > Power Options.
(2)
Internal display switch
Turns off the display if the display is closed while the power is
on.
(3)
Info button (select models only)
Launches Info Center, which enables you to open various
software solutions.
(4)
Wireless button
Turns the wireless feature on or off, but does not establish a
wireless connection.
NOTE: A wireless network must be set up in order to establish
a wireless connection.
14
(5)
Presentation button (select models only)
Starts the presentation feature.
(6)
Volume mute button (select models only)
Mutes and restores speaker sound.
(7)
Volume scroll zone (select models only)
Adjusts speaker volume. Slide your finger to the left to decrease
volume and to the right to increase volume. You can also tap the
minus sign on the scroll zone to decrease volume, or tap the
plus sign on the scroll zone to increase volume.
(8)
Internal microphone (select models only)
Records sound.
(9)
Fingerprint reader (select models only)
Allows a fingerprint logon to Windows, instead of a password
logon.
Chapter 2 External component identification
Keys
Item
Component
Function
(1)
esc key
Displays system information when pressed in combination with
the fn key.
(2)
fn key
Executes frequently used system functions when pressed in
combination with a function key or the esc key.
(3)
Windows logo key
Displays the Windows Start menu.
(4)
Windows applications key
Displays a shortcut menu for items beneath the pointer.
(5)
Embedded numeric keypad keys
Can be used like the keys on an external numeric keypad.
(6)
Function keys
Execute frequently used system functions when pressed in
combination with the fn key.
Top components
15
Lights
Item
Component
Function
(1)
Power lights (2)
●
On: The computer is on.
●
Blinking: The computer is in the Sleep state (Windows
Vista) or in Standby (Windows XP).
●
Blinking rapidly: An AC adapter with a higher power
rating must be connected.
●
Off: The computer is off or in Hibernation.
●
On: An integrated wireless device, such as a wireless local
area network (WLAN) device, a wireless wide-area
network (WWAN) device, and/or a Bluetooth device is
turned on.
●
Off: All wireless devices are turned off.
(2)
16
Wireless lights (2)
(3)
Caps lock light
On: Caps lock is on.
(4)
Num lock light
On: Num lock is on or the embedded numeric keypad is
enabled.
(5)
Volume mute light (select models only)
●
Off: Computer sound is turned on.
●
On: Computer sound is turned off.
(6)
Volume down light (select models only)
Blinking: The volume scroll zone is being used to decrease
speaker volume.
(7)
Volume up light (select models only)
Blinking: The volume scroll zone is being used to increase
speaker volume.
Chapter 2 External component identification
Item
Component
Function
(8)
Battery light
●
Amber: A battery is charging.
●
Green: A battery is close to full charge capacity.
●
Blinking amber: A battery that is the only available power
source has reached a low battery level. When the battery
reaches a critical battery level, the battery light begins
blinking rapidly.
●
Off: If the computer is plugged into an external power
source, the light turns off when all batteries in the computer
are fully charged. If the computer is not plugged into an
external power source, the light stays off until the battery
reaches a low battery level.
●
Blinking green: The hard drive or optical drive is being
accessed.
●
Amber: HP 3D DriveGuard has temporarily parked the
internal hard drive.
(9)
Drive light
TouchPad
Item
Component
Function
(1)
TouchPad*
Moves the pointer and selects or activates items on the screen.
(2)
Left TouchPad button*
Functions like the left button on an external mouse.
(3)
TouchPad scroll zone
Scrolls up or down.
(4)
Right TouchPad button*
Functions like the right button on an external mouse.
*This table describes factory settings. View or change pointing device preferences as follows:
●
In Windows Vista, select Start > Control Panel > Hardware and Sound > Mouse.
●
In Windows XP, select Start > Control Panel > Printers and Other Hardware > Mouse.
Top components
17
Front components
Item
Component
Function
(1)
Wireless light
●
On: An integrated wireless device, such as a WLAN
device, a WWAN device, and/or a Bluetooth device, is
turned on.
●
Off: All wireless devices are turned off.
●
On: The computer is on.
●
Blinking: The computer is in the Sleep state (Windows
Vista) or in Standby (Windows XP).
●
Blinking rapidly: An AC adapter with a higher power
rating must be connected.
●
Off: The computer is off or in Hibernation.
●
Amber: A battery is charging.
●
Green: A battery is close to full charge capacity.
●
Blinking amber: A battery that is the only available power
source has reached a low battery level. When the battery
reaches a critical battery level, the battery light begins
blinking rapidly.
●
Off: If the computer is plugged into an external power
source, the light turns off when all batteries in the computer
are fully charged. If the computer is not plugged into an
external power source, the light stays off until the battery
reaches a low battery level.
●
Blinking green: The hard drive or optical drive is being
accessed.
●
Amber (select models only): HP 3D DriveGuard has
temporarily parked the hard drive.
(2)
(3)
(4)
18
Power light
Battery light
Drive light
(5)
Speakers
Produce sound.
(6)
Display release latch
Opens the computer.
Chapter 2 External component identification
Left-side components
Item
Component
Function
(1)
PC Card slot
Supports optional Type I or Type II 32–bit (CardBus) or 16–bit
PC Cards.
(2)
PC Card eject button
Ejects a PC Card from the PC Card slot.
(3)
Power connector
Connects an AC adapter.
(4)
Vent
Enables airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal for
the internal fan to cycle on and off during routine operation.
(5)
USB ports (2)
Connect optional USB devices.
(6)
Audio-out (headphone) jack
Produces sound when connected to optional powered stereo
speakers, headphones, ear buds, a headset, or television audio.
(7)
Audio-in (microphone) jack
Connects an optional computer headset microphone, stereo
array microphone, or monaural microphone.
(8)
1394 port (select models only)
Connects an optional IEEE 1394 or 1394a device, such as a
camcorder.
Left-side components
19
Rear components
Item
Component
Function
(1)
Security cable slot
Attaches an optional security cable to the computer.
NOTE: The security cable is designed to act as a deterrent,
but it may not prevent the computer from being mishandled or
stolen.
20
(2)
RJ-45 (network) jack
Connects a network cable.
(3)
External monitor port
Connects an external VGA monitor or projector.
(4)
S-Video-out jack
Connects an optional S-Video device such as a television, VCR,
camcorder, overhead projector, or video capture card.
Chapter 2 External component identification
Right-side components
Item
Component
Function
(1)
Media Card Reader (select models only)
Supports the following optional digital card formats:
●
Secure Digital (SD) Memory Card
●
MultiMediaCard (MMC)
●
Memory Stick (MS)
●
Memory Stick Pro (MSP)
●
Memory Stick Duo Adapter
●
xD-Picture Card (XD)
(2)
USB ports (2) (select models only)
Connect optional USB devices.
(3)
Optical drive
Reads optical discs, and, on select models, also writes to optical
discs.
(4)
RJ-11 (modem) jack
Connects a modem cable.
Right-side components
21
Bottom components
Item
Component
Function
(1)
Battery bay
Holds the battery.
(2)
Battery release latches (2)
Release the battery from the battery bay.
(3)
Accessory battery connector
Connects an optional accessory battery.
(4)
Vents (3)
Enable airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal for
the internal fan to cycle on and off during routine operation.
(5)
Bluetooth module compartment (select models only)
Contains a Bluetooth device.
(6)
Docking connector (select models only)
Connects an optional docking device.
(7)
Memory/WLAN module compartment
Contains the memory module slot and the WLAN module slot.
CAUTION: To prevent an unresponsive system, replace the
wireless module only with a wireless module authorized for use
in the computer by the governmental agency that regulates
wireless devices in your country or region. If you replace the
module and then receive a warning message, remove the
module to restore computer functionality, and then contact
technical support through Help and Support.
(8)
22
Hard drive bay
Chapter 2 External component identification
Holds the hard drive.
3
Illustrated parts catalog
Serial number location
When ordering parts or requesting information, provide the computer serial number and model number
located on the bottom of the computer.
Serial number location
23
Computer major components
24
Chapter 3 Illustrated parts catalog
Item
Description
(1)
Display assemblies
Spare part number
15.4-inch, WSXGA+ display assembly for use with HP Compaq 6715b and 6710b
computer models with WWAN capability
443814-001
15.4-inch, WXGA display assembly for use with HP Compaq 6715b and 6710b computer
models with WWAN capability
443817-001
15.4-inch, WXGA, BrightView display assembly for use with HP Compaq 6715b and
6710b computer models without WWAN capability
443816-001
15.4-inch, WSXGA+ display assembly for use with HP Compaq 6715b and 6710b
computer models without WWAN capability
443813-001
15.4-inch, WXGA display assembly for use with HP Compaq 6715b and 6710b computer
models without WWAN capability
443815-001
15.4-inch, WXGA, BrightView display assembly for use with HP Compaq 6715s and
6710s computer models
443812-001
15.4-inch, WSXGA+ display assembly for use with HP Compaq 6715s and 6710s
computer models
443818-001
15.4-inch, WXGA display assembly for use with HP Compaq 6715s and 6710s computer
models
443819-001
Display assembly internal components
(2)
Display bezel
446871-001
15.4-inch, WSXGA+ display panel for use with HP Compaq 6710b computer models with
WWAN capability
446900-001
15.4-inch, WXGA display panel for use with HP Compaq 6710b computer models with
WWAN capability
446899-001
15.4-inch, WSXGA+ display panel for use with HP Compaq 6710b computer models
without WWAN capability
446897-001
15.4-inch, WXGA, BrightView display panel for use with HP Compaq 6710b computer
models without WWAN capability
446898-001
15.4-inch, WXGA display panel for use with HP Compaq 6710b computer models without
WWAN capability
446896-001
15.4-inch, WSXGA+ display panel for use with HP Compaq 6710s computer models
446902-001
15.4-inch, WXGA, BrightView display panel for use with HP Compaq 6710s computer
models
446903-001
15.4-inch, WXGA display panel for use with HP Compaq 6710s computer models
446901-001
Display inverter (includes 2-sided tape)
446870-001
Display left and right hinges
446882-001
Display enclosure for use with HP Compaq 6715b and 6710b computer models
446883-001
Display enclosure for use with HP Compaq 6715s and 6710s computer models
450612-001
Switch covers (include power button board and power button board cable)
Computer major components
25
Item
(3)
26
Description
Spare part number
For use with HP Compaq 6715b and 6710b computer models (includes LED board and
cable)
443911-001
For use with HP Compaq 6715s and 6710s computer models (does not include LED board
and cable)
443910-001
Keyboards
Belgium
443811-181
Brazil
443811-201
The Czech Republic
443811-221
Denmark
443811-081
France
443811-051
French Canada
443811-121
Germany
443811-041
Greece
443811-DJ1
Hungary
443811-211
International
443811-B31
Iceland
443811-DD1
Israel
443811-BB1
Italy
443811-061
Japan
443811-291
Korea
443811-AD1
Latin America
443811-161
Norway
443811-091
Portugal
443811-131
Russia
443811-251
Saudi Arabia
443811-171
Slovakia
443811-231
Slovenia
443811-BA1
Spain
443811-071
Sweden and Finland
443811-B71
Switzerland
443811-BG1
Taiwan
443811-AB1
Thailand
443811-281
Turkey
443811-141
Chapter 3 Illustrated parts catalog
Item
Description
Spare part number
The United Kingdom
443811-031
The United States
443811-001
(4)
Fan
443917-001
(5)
WWAN modules
(6)
EVDO WWAN module
399440-001
Vodafone HSPDA WWAN module
448672-002
Cingular HSPDA WWAN module
448673-002
Heat sinks (include thermal material)
For use with HP Compaq 6715 computer models
443912-001
For use with HP Compaq 6710 computer models
446920-001
Thermal Material Kits (not illustrated)
(7)
For use in all countries and regions except Japan and Asia/Pacific
413706-001
For use in Japan and Asia/Pacific countries and regions
445853-001
Memory modules, 1-DIMM
2048-MB, PC2-5300
417506-001
1024-MB, PC2-5300
414046-001
512-MB, PC2-5300
414045-001
Cable Kit (see Cable Kit on page 34 for more Cable Kit spare part information)
443887-001
(8a)
Microphone (includes receiver and cable)
(8b)
Modem module cable (includes RJ-11 connector and cable)
(8c)
Bluetooth module cable
Plastics Kit (see Plastics Kit on page 33 for more Plastics Kit spare part information)
(9a)
PC Card slot bezel
(9b)
Hard drive cover (includes 2 captive screws, secured by C-clips)
(9c)
Memory/WLAN module compartment cover (includes 1 captive screw, secured by a C-clip)
(9d)
Bluetooth module compartment cover (includes 1 captive screw, secure by a C-clip)
443905-001
Computer feet (4 large rubber feet, 4 small rubber feet, not illustrated)
(10)
Processors (include thermal material)
Processors for use with HP Compaq 6715 computer models in all countries and regions except Japan and Asia/
Pacific:
AMD Turion TL-64 (2.2-GHz, 1-MB L2 cache)
443913-001
AMD Turion MK-38 (2.2-GHz, 512-KB L2 cache)
446045-001
AMD Turion TL-60 (2.0-GHz, 1-MB L2 cache)
430876-001
Computer major components
27
Item
Description
Spare part number
AMD Turion TL-56 (1.8-GHz, 1-MB L2 cache)
430875-001
AMD Turion TL-52 (1.6-GHz, 1-MB L2 cache)
430874-001
AMD Turion TL-50 (1.6-GHz, 1-MB L2 cache)
450940-001
Mobile AMD Sempron 3800+ (2.2-GHz, 256-KB L2 cache)
450939-001
Mobile AMD Sempron 3600+ (2.0-GHz, 256-KB L2 cache)
443916-001
Mobile AMD Sempron 3500+ (1.8-GHz, 512-KB L2 cache)
430872-001
Mobile AMD Sempron 3400+ (1.8-GHz, 256-KB L2 cache)
430871-001
Processors for use with HP Compaq 6715 computer models in Japan and Asia/Pacific countries and regions
AMD Turion TL-60 (2.0-GHz, 1-MB L2 cache)
443892-001
AMD Turion TL-56 (1.8-GHz, 1-MB L2 cache)
443891-001
AMD Turion TL-52 (1.6-GHz, 1-MB L2 cache)
443890-001
Mobile AMD Sempron 3500+ (1.8-GHz, 512-KB L2 cache)
443915-001
Mobile AMD Sempron 3400+ (1.8-GHz, 256-KB L2 cache)
443914-001
Processors for use with HP Compaq 6710 computer models
(11)
(12)
28
Intel Core Duo T7700 2.4-GHz with 4-MB of L2 cache
446894-001
Intel Core Duo T7500 2.2-GHz with 4-MB of L2 cache
446893-001
Intel Core Duo T7300 2.0-GHz with 4-MB of L2 cache
446892-001
Intel Core Duo T7100 1.8-GHz with 2-MB of L2 cache
446891-001
Top covers (include TouchPad and TouchPad cable)
For use with HP Compaq 6715b and 6710b computer models (includes fingerprint reader)
443822-001
For use with HP Compaq 6715s and 6710s computer models (does not include fingerprint
reader)
443823-001
PC Card/audio board assembly
For use with HP Compaq 6715b and 6710b computer models (includes 1394 port)
443889-001
For use with HP Compaq 6715s and 6710s computer models
443888-001
(13)
RTC battery
449137-001
(14)
System boards
For use with HP Compaq 6715b computer models with WWAN capability (includes
WWAN module slot)
443896-001
For use with HP Compaq 6715b computer models without WWAN capability (does not
include WWAN module slot)
443898-001
For use with HP Compaq 6715s computer models
443897-001
For use with HP Compaq 6710b computer models with WWAN capability (includes
WWAN module slot)
446905-001
Chapter 3 Illustrated parts catalog
Item
Description
Spare part number
For use with HP Compaq 6710b computer models without WWAN capability (does not
include WWAN module slot)
446904-001
For use with HP Compaq 6710s computer models
446906-001
(15)
SIM slot board––for use with HP Compaq 6715b and 6710b computer models with
WWAN capability
443907-001
(16)
Speaker assembly
443821-001
(17)
Modem modules (include modem module cable)
For use with HP Compaq 6715 computer models and with HP Compaq 6710 computer
models in all countries and regions except Japan and Asia/Pacific
441074-001
For use with HP Compaq 6710 computer models in Japan and Asia/Pacific countries and
regions
449139-001
(18)
USB/Media Card Reader board––for use with HP Compaq 6715b and 6710b
computer models (includes USB/Media Card Reader board cable)
443883-001
(19)
Optical drive connector board
443820-001
(20)
Base enclosures (include 8 rubber feet, not illustrated)
(21)
(22)
(23)
For use with HP Compaq 6715b and 6715s computer models
443809-001
For use with HP Compaq 6710s and 6710s computer models
443808-001
Batteries
6-cell, 2.55-Ah, 55-Wh, Li-ion battery
443885-001
6-cell, 2.20-Ah, 47-Wh, Li-ion battery
443884-001
Hard drives (include hard drive bracket and connector)
160-GB, 5400-rpm
443920-001
120-GB, 5400-rpm
443919-001
80-GB, 7200-rpm
445939-001
80-GB, 5400-rpm
443918-001
WLAN modules
802.11a/b/g/n Broadcom WLAN modules for use with all computer models
For use in Canada, the Cayman Islands, Guam, Puerto Rico, the United States, and the
Virgin Islands
441530-001
Computer major components
29
Item
Description
Spare part number
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua & Barbuda,
Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain,
Bangladesh, Barbados, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia &
Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso,
Burundi, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, China,
Colombia, Comoros, Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark,
Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador,
Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon,
Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe,
Guatemala, Guinea, Guinea-Bissa, Guyana, Haiti, Honduras, Hong Kong, Hungary,
Iceland, India, Ireland, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya,
Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania,
Luxembourg, Macedonia, Madagascar, Malawi, the Maldives, Mali, Malta, the Marshall
Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia,
Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles,
the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan,
Palau, Panama, Papua New Guinea, Paraguay, Peru, the Philippines, Poland, Portugal,
Puerto Rico, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao
Tome & Principe Saudi Arabia, Senegal, Serbia and Montenegro, the Seychelles, Sierra
Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, Spain,
Sri Lanka, St. Kitts & Nevis, St. Lucia, St. Vincent & Gren, Suriname, Swaziland, Sweden,
Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad & Tobago, Tunisia,
Turkey, Turkmenistan, Tuvalu, Uganda, the United Arab Emirates, the United Kingdom,
Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and
Zimbabwe
441530-002
For use in Israel and Japan
441530-291
802.11a/b/g/n Intel WLAN module for use with HP Compaq 6710 computer models
For use in Antigua and Barbuda, Argentina, Aruba, the Bahamas, Barbados, Bermuda,
Brunei, Canada, the Cayman Islands, Chile, Colombia, Costa Rica, the Dominican
Republic, Ecuador, El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong, India,
Indonesia, Malaysia, Mexico, Panama, Paraguay, Peru, Saudi Arabia, Taiwan, Uruguay,
the United States, Venezuela, and Vietnam
441086-001
For use in Austria, Azerbaijan, Bahrain, Belgium, Brazil, Bulgaria, Croatia, Cyprus, the
Czech Republic, Denmark, Egypt, Estonia, Finland, France, Georgia, Germany, Greece,
Hungary, Iceland, Ireland, Israel, Italy, Latvia, Lebanon, Liechtenstein, Lithuania,
Luxembourg, Malta, Monaco, the Netherlands, Norway, Oman, the Philippines, Poland,
Portugal, Qatar, Romania, Russia, Serbia and Montenegro, Singapore, Slovakia, Slovenia,
South Africa, Spain, Sri Lanka, Sweden, Switzerland, Turkey, Ukraine, the United
Kingdom, and Uzbekistan
441086-002
For use in Australia, New Zealand, Pakistan, the People's Republic of China, and South
Korea
441086-003
For use in Japan
441086-291
802.11a/b/g Broadcom WLAN modules for use with all computer models
For use in Canada, the Cayman Islands, Guam, Puerto Rico, the United States, and the
Virgin Islands
30
Chapter 3 Illustrated parts catalog
441075-001
Item
Description
Spare part number
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua & Barbuda,
Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain,
Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia
& Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso,
Burundi, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, China,
Colombia, Comoros, Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark,
Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador,
Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon,
Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe,
Guatemala, Guinea, Guinea-Bissa, Guyana, Haiti, Honduras, Hong Kong, Hungary,
Iceland, India, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya,
Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania,
Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the
Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco,
Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether
Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman,
Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru, the Philippines, Poland,
Portugal, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao
Tome & Principe, Saudi Arabia, Senegal, Serbia and Montenegro, the Seychelles, Sierra
Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South
Korea, Spain, Sri Lanka, St. Kitts & Nevis, St. Lucia, St. Vincent & Gren, Suriname,
Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad &
Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab
Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam,
Yemen, Zaire, Zambia, and Zimbabwe
441075-002
For use in Israel and Japan
441075-291
802.11a/b/g Intel WLAN modules for use with HP Compaq 6710 computer models
For use in Antigua and Barbuda, Argentina, Australia, the Bahamas, Barbados, Brunei,
Canada, Chile, the Dominican Republic, Guam, Guatemala, Hong Kong, India, Indonesia,
Malaysia, Mexico, New Zealand, Panama, Paraguay, Saudi Arabia, Taiwan, the United
States, and Vietnam
407575-001
For use in Aruba, Austria, Azerbaijan, Bahrain, Belgium, Bermuda, Brazil, Bulgaria, the
Cayman Islands, Colombia, Croatia, Cyprus, the Czech Republic, Denmark, Egypt, El
Salvador, Estonia, Finland, France, Georgia, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Jordan, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg, Malta, Monaco, the
Netherlands, Norway, Oman, the Philippines, Poland, Portugal, Romania, Russia, Serbia
and Montenegro, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri Lanka, Sweden,
Switzerland, Turkey, the United Kingdom, and Uzbekistan
407575-002
For use in Ecuador, Haiti, Honduras, Pakistan, the People's Republic of China, Peru, Qatar,
South Korea, Uruguay, and Venezuela
407575-003
For use in Japan
407575-291
802.11a/b/g Intel WLAN modules for use with HP Compaq 6710 computer models
For use in Antigua & Barbuda, Argentina, Aruba, the Bahamas, Barbados, Bermuda,
Brunei, Canada, the Cayman Islands, Chile, Colombia, Costa Rica, the Dominican
Republic, Ecuador, El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong, India,
Indonesia, Malaysia, Mexico, Panama, Paraguay, Peru, Saudi Arabia, Taiwan, the United
States, Uruguay, Venezuela, and Vietnam
441082-001
Computer major components
31
Item
Description
Spare part number
For use in Austria, Azerbaijan, Bahrain, Belgium, Brazil, Bulgaria, Croatia, Cyprus, the
Czech Republic, Denmark, Egypt, Estonia, Finland, France, Georgia, Germany, Greece,
Hungary, Iceland, Ireland, Israel, Italy, Latvia, Lebanon, Liechtenstein, Lithuania,
Luxembourg, Malta, Monaco, the Netherlands, Norway, Oman, the Philippines, Poland,
Portugal, Qatar, Romania, Russia, Serbia and Montenegro, Singapore, Slovakia, Slovenia,
South Africa, Spain, Sri Lanka, Sweden, Switzerland, Turkey, Ukraine, the United
Kingdom, and Uzbekistan
441082-002
For use in Australia, New Zealand, Pakistan, the People's Republic of China, and South
Korea
441082-003
For use in Japan
441082-291
802.11b/g Broadcom WLAN modules for use with all computer models
(24)
(25)
32
For use in Canada, the Cayman Islands, Guam, Puerto Rico, the United States, and the
U.S. Virgin Islands
441060-001
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua & Barbuda,
Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain,
Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia
& Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso,
Burundi, Cambodia, Cameroon, Cape Verde, the Central African Republic, Chad, Chile,
China, Colombia, Comoros, Congo, Costa Rica, Croatia, Cyprus, the Czech Republic,
Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El
Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French
Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada,
Guadeloupe, Guatemala, Guinea, Guinea-Bissa, Guyana, Haiti, Honduras, Hong Kong,
Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan,
Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia,
Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the
Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico,
Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru,
Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria,
Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru, the
Philippines, Poland, Portugal, Qatar, the Republic of Moldova, Romania, Russia, Rwanda,
Samoa, San Marino, Sao Tome & Principe, Saudi Arabia, Senegal, Serbia and
Montenegro, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon
Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts & Nevis, St. Lucia,
St. Vincent & Gren, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan,
Tanzania, Thailand, Togo, Tonga, Trinidad & Tobago, Tunisia, Turkey, Turkmenistan,
Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay,
Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
441060-002
For use in Japan
441060-291
802.11b/g WLAN module for use with HP Compaq 6710 computer models in Japan
409280-004
Bluetooth modules (include Bluetooth module cable)
For use with all computer models in all countries and regions except Japan and Asia/
Pacific
398393-002
For use with all computer models in Japan and Asia/Pacific countries and regions
450066-001
Optical drives (include bezel and optical drive bracket)
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe
443903-001
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
443904-001
Chapter 3 Illustrated parts catalog
Item
Description
Spare part number
DVD/CD-RW Combo Drive
443901-001
DVD-ROM drive
443902-001
Plastics Kit
Item
Description
Spare part number
Plastics Kit
443905-001
(1)
PC Card slot bezel
(2)
Hard drive cover (includes 2 captive screws, secured by C-clips)
(3)
Memory/WLAN module compartment cover (includes 1 captive screw, secured by a C-clip)
(4)
Bluetooth module cover (includes 1 captive screw, secured by a C-clip)
(5)
Computer feet (4 large and 4 small rubber feet)
Plastics Kit
33
Cable Kit
Item
34
Description
Spare part number
Cable Kit
443887-001
(1)
Modem module cable (includes RJ-11 connector and cable)
(2)
Microphone (includes receiver and cable)
(3)
Bluetooth module cable
Chapter 3 Illustrated parts catalog
Mass storage devices
Item
Description
(1)
Hard drives (include frame and connector)
(2)
Spare part number
160-GB, 5400-rpm
443920-001
120-GB, 5400-rpm
443919-001
80-GB, 7200-rpm
445939-001
80-GB, 5400-rpm
443918-001
Optical drives (include bezel and optical drive bracket)
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe
443903-001
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
443904-001
DVD/CD-RW Combo Drive
443901-001
DVD-ROM drive
443902-001
Mass storage devices
35
Miscellaneous parts
Description
Spare part number
AC adapters
90-watt AC adapter for use in North America
391173-001
90-watt AC adapter for use in Africa, Europe, and the Middle East
416421-021
Power cords:
Australia
246959-011
Brazil
246959-201
Denmark
246959-081
Europe, the Middle East, and Africa
246959-021
Israel
246959-BB1
Italy
246959-061
Japan
246959-291
Korea
246959-AD1
Switzerland
246959-AG1
The United Kingdom
246959-031
The United States
246959-001
Screw Kit
443906-001
Hex HM5.0×9.0 screw lock
Phillips PM3.0×3.0 screw
Phillips PM2.5×13.0 captive screw
Phillips PM2.5×8.0 captive screw
Phillips PM2.5×7.0 captive screw
Phillips PM2.5×7.0 screw
Phillips PM2.5×5.0 screw
Phillips PM2.5×3.0 screw
Phillips PM2.0×6.0 screw
Phillips PM2.0×5.0 captive screw
Phillips PM2.0×3.0 screw
Torx T8M2.5×9.0 screw
Smart card reader module
36
Chapter 3 Illustrated parts catalog
443908-001
Sequential part number listing
Spare part
number
Description
246959-001
Power cord for use in the United States
246959-011
Power cord for use in Australia
246959-021
Power cord for use in Europe, the Middle East, and Africa
246959-031
Power cord for use in the United Kingdom
246959-061
Power cord for use in Italy
246959-081
Power cord for use in Denmark
246959-201
Power cord for use in Brazil
246959-291
Power cord for use in Japan
246959-AD1
Power cord for use in Korea
246959-AG1
Power cord for use in Switzerland
246959-BB1
Power cord for use in Israel
391173-001
90-watt PFC AC adapter for use with computer models in Africa, Europe, and the Middle East
398393-002
Bluetooth module for use with all computer models in all countries and regions except Japan and Asia/Pacific
(includes Bluetooth module cable)
399440-001
EVDO WWAN module
407575-001
802.11a/b/g Intel WLAN module for use with HP Compaq 6710 computer models in Antigua and Barbuda,
Argentina, Australia, the Bahamas, Barbados, Brunei, Canada, Chile, the Dominican Republic, Guam,
Guatemala, Hong Kong, India, Indonesia, Malaysia, Mexico, New Zealand, Panama, Paraguay, Saudi
Arabia, Taiwan, the United States, and Vietnam
407575-002
802.11a/b/g Intel WLAN module for use with HP Compaq 6710 computer models in Aruba, Austria,
Azerbaijan, Bahrain, Belgium, Bermuda, Brazil, Bulgaria, the Cayman Islands, Colombia, Croatia, Cyprus,
the Czech Republic, Denmark, Egypt, El Salvador, Estonia, Finland, France, Georgia, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Jordan, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg, Malta,
Monaco, the Netherlands, Norway, Oman, the Philippines, Poland, Portugal, Romania, Russia, Serbia and
Montenegro, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri Lanka, Sweden, Switzerland, Turkey, the
United Kingdom, and Uzbekistan
407575-003
802.11a/b/g Intel WLAN module for use with HP Compaq 6710 computer models in Ecuador, Haiti,
Honduras, Pakistan, the People's Republic of China, Peru, Qatar, South Korea, Uruguay, and Venezuela
407575-291
802.11a/b/g Intel WLAN module for use with HP Compaq 6710 computer models in Japan
409280-004
802.11b/g WLAN module for use with HP Compaq 6710 computer models in Thailand
413706-001
Thermal Material Kit for use in all countries and regions except Japan and Asia/Pacific
414045-001
512-MB, 1-DIMM, PC2-5300 memory module
414046-001
1024-MB, 1-DIMM, PC2-5300 memory module
416421-021
90-watt PFC AC adapter for use with computer models in North America
417506-001
2048-MB, 1-DIMM, PC2-5300 memory module
Sequential part number listing
37
38
Spare part
number
Description
430871-001
Mobile AMD Sempron 3400+ 1.8-GHz processor for use with HP Compaq 6715 computer models in all
countries and regions except Japan and Asia/Pacific (256-KB L2 cache)
430872-001
Mobile AMD Sempron 3500+ 1.8-GHz processor for use with HP Compaq 6715 computer models in all
countries and regions except Japan and Asia/Pacific (512-KB L2 cache)
430874-001
AMD Turion TL-52 1.6-GHz processor for use with HP Compaq 6715 computer models in all countries and
regions except Japan and Asia/Pacific (1-MB L2 cache)
430875-001
AMD Turion TL-56 1.8-GHz processor for use with HP Compaq 6715 computer models in all countries and
regions except Japan and Asia/Pacific (1-MB L2 cache)
430876-001
AMD Turion TL-60 2.0-GHz processor for use with HP Compaq 6715 computer models in all countries and
regions except Japan and Asia/Pacific (1-MB L2 cache)
441060-001
802.11b/g Broadcom WLAN module for use with all computer models only in Canada, the Cayman Islands,
Guam, Puerto Rico, the United States, and the Virgin Islands
441060-002
802.11b/g Broadcom WLAN module for use with all computer models only in Afghanistan, Albania,
Algeria, Andorra, Angola, Antigua & Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan,
the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia,
Bosnia & Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi,
Cameroon, Cape Verde, the Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo,
Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East
Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French
Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe,
Guatemala, Guinea, Guinea-Bissa, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland,
Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia,
Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi,
Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico,
Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether
Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau,
Panama, Papua New Guinea, Paraguay, Peru, the Philippines, Poland, Portugal, the Republic of Moldova,
Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome & Principe, Saudi Arabia, Senegal, Serbia and
Montenegro, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia,
South Africa, South Korea, Spain, Sri Lanka, St. Kitts & Nevis, St. Lucia, St. Vincent & Gren, Suriname,
Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad & Tobago, Tunisia,
Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay,
Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
441060-291
802.11b/g Broadcom WLAN module for use with all computer models only in Japan
441074-001
For use with HP Compaq 6715 computer models and with HP Compaq 6710 computer models in all
countries and regions except Japan and Asia/Pacific
441075-001
802.11a/b/g Broadcom WLAN module for use with all computer models only in Canada, the Cayman
Islands, Guam, Puerto Rico, the United States, and the Virgin Islands
Chapter 3 Illustrated parts catalog
Spare part
number
Description
441075-002
802.11a/b/g Broadcom WLAN module for use with all computer models only in Afghanistan, Albania,
Algeria, Andorra, Angola, Antigua & Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan,
the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia,
Bosnia & Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi,
Cameroon, Cape Verde, the Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo,
Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East
Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French
Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe,
Guatemala, Guinea, Guinea-Bissa, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland,
Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia,
Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi,
Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico,
Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether
Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau,
Panama, Papua New Guinea, Paraguay, Peru, the Philippines, Poland, Portugal, the Republic of Moldova,
Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome & Principe, Saudi Arabia, Senegal, Serbia and
Montenegro, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia,
South Africa, South Korea, Spain, Sri Lanka, St. Kitts & Nevis, St. Lucia, St. Vincent & Gren, Suriname,
Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad & Tobago, Tunisia,
Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay,
Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
441075-291
802.11a/b/g Broadcom WLAN module for use with all computer models only in Israel and Japan
441082-001
802.11a/b/g Intel WLAN module for use with HP Compaq 6710 computer models in Antigua & Barbuda,
Argentina, Aruba, the Bahamas, Barbados, Bermuda, Brunei, Canada, the Cayman Islands, Chile, Colombia,
Costa Rica, the Dominican Republic, Ecuador, El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong,
India, Indonesia, Malaysia, Mexico, Panama, Paraguay, Peru, Saudi Arabia, Taiwan, the United States,
Uruguay, Venezuela, Vietnam
441082-002
802.11a/b/g Intel WLAN module for use with HP Compaq 6710 computer models in Austria, Azerbaijan,
Bahrain, Belgium, Brazil, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Egypt, Estonia, Finland,
France, Georgia, Germany, Greece, Hungary, Iceland, Ireland, Israel, Italy, Latvia, Lebanon, Liechtenstein,
Lithuania, Luxembourg, Malta, Monaco, the Netherlands, Norway, Oman, the Philippines, Poland, Portugal,
Qatar, Romania, Russia, Serbia and Montenegro, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri
Lanka, Sweden, Switzerland, Turkey, Ukraine, the United Kingdom, and Uzbekistan
441082-003
802.11a/b/g Intel WLAN module for use with HP Compaq 6710 computer models in Australia, New
Zealand, Pakistan, the People's Republic of China, and South Korea
441082-291
802.11a/b/g Intel WLAN module for use with HP Compaq 6710 computer models in Japan
441086-001
802.11a/b/g/n Intel WLAN module for use with HP Compaq 6710 computer models in Antigua and
Barbuda, Argentina, Aruba, the Bahamas, Barbados, Bermuda, Brunei, Canada, the Cayman Islands, Chile,
Colombia, Costa Rica, the Dominican Republic, Ecuador, El Salvador, Guam, Guatemala, Haiti, Honduras,
Hong Kong, India, Indonesia, Malaysia, Mexico, Panama, Paraguay, Peru, Saudi Arabia, Taiwan, Uruguay,
the United States, Venezuela, and Vietnam
441086-002
802.11a/b/g/n Intel WLAN module for use with HP Compaq 6710 computer models in Austria, Azerbaijan,
Bahrain, Belgium, Brazil, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Egypt, Estonia, Finland,
France, Georgia, Germany, Greece, Hungary, Iceland, Ireland, Israel, Italy, Latvia, Lebanon, Liechtenstein,
Lithuania, Luxembourg, Malta, Monaco, the Netherlands, Norway, Oman, the Philippines, Poland, Portugal,
Qatar, Romania, Russia, Serbia and Montenegro, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri
Lanka, Sweden, Switzerland, Turkey, Ukraine, the United Kingdom, and Uzbekistan
441086-003
802.11a/b/g/n Intel WLAN module for use in with HP Compaq 6710 computer models in Australia, New
Zealand, Pakistan, the People's Republic of China, and South Korea
Sequential part number listing
39
40
Spare part
number
Description
441086-291
802.11a/b/g/n Intel WLAN module for use with HP Compaq 6710 computer models in Japan
441530-001
802.11a/b/g/n Broadcom WLAN module for use with all computer models only in Canada, the Cayman
Islands, Guam, Puerto Rico, the United States, and the Virgin Islands
441530-002
802.11a/b/g/n Broadcom WLAN module for use with all computer models only in Afghanistan, Albania,
Algeria, Andorra, Angola, Antigua & Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan,
the Bahamas, Bahrain, Bangladesh, Barbados, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia &
Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon,
Cape Verde, the Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo, Costa Rica,
Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor,
Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French
Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe,
Guatemala, Guinea, Guinea-Bissa, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland,
Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon,
Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, the Maldives, Mali,
Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia,
Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New
Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea,
Paraguay, Peru, the Philippines, Poland, Portugal, Puerto Rico, the Republic of Moldova, Romania, Russia,
Rwanda, Samoa, San Marino, Sao Tome & Principe Saudi Arabia, Senegal, Serbia and Montenegro, the
Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, Spain,
Sri Lanka, St. Kitts & Nevis, St. Lucia, St. Vincent & Gren, Suriname, Swaziland, Sweden, Switzerland,
Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad & Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu,
Uganda, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam,
Yemen, Zaire, Zambia, and Zimbabwe
441530-291
802.11a/b/g/n Broadcom WLAN module for use with all computer models only in Israel and Japan
443808-001
Base enclosure for use with HP Compaq 6715b and 6710s computer models (includes 8 rubber feet)
443809-001
Base enclosure for use with HP Compaq 6715s and 6710s computer models (includes 8 rubber feet)
443811-001
Keyboard for use in the United States
443811-031
Keyboard for use in the United Kingdom
443811-041
Keyboard for use in Germany
443811-051
Keyboard for use in France
443811-061
Keyboard for use in Italy
443811-071
Keyboard for use in Spain
443811-081
Keyboard for use in Denmark
443811-091
Keyboard for use in Norway
443811-121
Keyboard for use in French Canada
443811-131
Keyboard for use in Portugal
443811-141
Keyboard for use in Turkey
443811-161
Keyboard for use in Latin America
443811-171
Keyboard for use in Saudi Arabia
443811-181
Keyboard for use in Belgium
Chapter 3 Illustrated parts catalog
Spare part
number
Description
443811-201
Keyboard for use in Brazil
443811-211
Keyboard for use in Hungary
443811-221
Keyboard for use in the Czech Republic
443811-231
Keyboard for use in Slovakia
443811-251
Keyboard for use in Russia
443811-281
Keyboard for use in Thailand
443811-291
Keyboard for use in Japan
443811-AB1
Keyboard for use in Taiwan
443811-AD1
Keyboard for use in Korea
443811-B31
Keyboard for use internationally
443811-B71
Keyboard for use in Sweden
443811-BA1
Keyboard for use in Slovenia
443811-BB1
Keyboard for use in Israel
443811-BG1
Keyboard for use in Switzerland
443811-DD1
Keyboard for use in Iceland
443811-DJ1
Keyboard for use in Greece
443812-001
15.4-inch WXGA, BrightView display assembly for use with HP Compaq 6715s and 6710s computer models
443813-001
15.4-inch WSXGA+ display assembly for use with HP Compaq 6715b and 6710b computer models without
WWAN capability
443814-001
15.4-inch WSXGA+ display assembly for use with HP Compaq 6715b and 6710b computer models with
WWAN capability
443815-001
15.4-inch WSXGA+ display assembly for use with HP Compaq 6715b and 6710b computer models without
WWAN capability
443816-001
15.4-inch WXGA, BrightView display assembly for use with HP Compaq 6715b and 6710b computer
models without WWAN capability
443817-001
15.4-inch WXGA, BrightView display assembly for use with HP Compaq 6715b and 6710b computer
models with WWAN capability
443818-001
15.4-inch WSXGA+ display assembly for use with HP Compaq 6715s and 6710s computer models
443819-001
15.4-inch WXGA display assembly for use with HP Compaq 6715s and 6710s computer models
443820-001
Optical drive connector board
443821-001
Speaker assembly
443822-001
Top cover for use with HP Compaq 6715b and 6710b computer models (includes TouchPad, TouchPad
cable, and fingerprint reader)
443823-001
Top cover for use with HP Compaq 6715s and 6710s computer models (includes TouchPad and TouchPad
cable)
Sequential part number listing
41
42
Spare part
number
Description
443883-001
USB/Media Card Reader board––for use with HP Compaq 6715b and 6710b computer models (includes
USB/Media Card Reader board cable)
443884-001
6-cell, 2.20-Ah, 47-Wh battery
443885-001
6-cell, 2.55-Ah, 55-Wh battery
443887-001
Cable Kit
443888-001
PC Card/audio board assembly for use with HP Compaq 6715s and 6710s computer models
443889-001
PC Card/audio board assembly for use with HP Compaq 6715b and 6710b computer models (includes
1394 port)
443890-001
AMD Turion TL-52 1.6-GHz processor for use with HP Compaq 6715 computer models only in Japan and
Asia/Pacific countries and regions (1-MB L2 cache)
443891-001
AMD Turion TL-56 1.8-GHz processor for use only with HP Compaq 6715 computer models only in Japan
and Asia/Pacific countries and regions (1-MB L2 cache)
443892-001
AMD Turion TL-60 2.0-GHz processor for use only with HP Compaq 6715 computer models only in Japan
and Asia/Pacific countries and regions (1-MB L2 cache)
443896-001
System board for use with HP Compaq 6715b computer models with WWAN capability (includes WWAN
module slot)
443897-001
System board for use with HP Compaq 6715s computer models
443898-001
System board for use with HP Compaq 6715b computer models without WWAN capability (does not include
WWAN module slot)
443901-001
DVD/CD-RW Combo Drive
443902-001
DVD-ROM drive
443903-001
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe
443904-001
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
443905-001
Plastics Kit
443906-001
Screw Kit
443907-001
SIM slot board (for use with HP Compaq 6715b and 6710b computer models)
443908-001
Smart card reader module
443910-001
Switch cover for use with HP Compaq 6715s and 6710s computer models (includes power button board and
power button board cable, but does not include LED board or LED board cable)
443911-001
Switch cover for use with HP Compaq 6715b and 6710b computer models (includes power button board and
power button board cable and LED board and LED board cable)
443912-001
Heat sink for use with HP Compaq 6715 computer models (includes thermal material)
443913-001
AMD Turion TL-64 2.2-GHz processor for use with HP Compaq 6715 computer models in all countries and
regions except Japan and Asia/Pacific (1-MB L2 cache)
443914-001
Mobile AMD Sempron 3400+ 1.8-GHz processor for use with HP Compaq 6715 computer models only in
Japan and Asia/Pacific countries and regions (256-KB L2 cache)
Chapter 3 Illustrated parts catalog
Spare part
number
Description
443915-001
Mobile AMD Sempron 3500+ 1.8-GHz processor for use with HP Compaq 6715 computer models only in
Japan and Asia/Pacific countries and regions (512-KB L2 cache)
443916-001
Mobile AMD Sempron 3600+ 2.0-GHz processor for use with HP Compaq 6715 computer models in all
countries and regions except Japan and Asia/Pacific (256-KB L2 cache)
443917-001
Fan
443918-001
80-GB, 5400-rpm hard drive
443919-001
120-GB, 5400-rpm hard drive
443920-001
160-GB, 5400-rpm hard drive
445853-001
Thermal Material Kit for use in Japan and Asia/Pacific countries and regions
445939-001
80-GB, 7200-rpm hard drive
446045-001
AMD Turion MK-38 2.2-GHz processor for use with HP Compaq 6715 computer models in all countries and
regions except Japan and Asia/Pacific (512-KB L2 cache)
446870-001
Display inverter (includes 2-sided tape)
446871-001
Display bezel
446882-001
Display left and right hinges
446883-001
Display enclosure for use with HP Compaq 6715b and 6710b computer models
446891-001
Intel Core Duo T7700 2.4-GHz processor with 4-MB L2 cache
446892-001
Intel Core Duo T7500 2.2-GHz processor with 4-MB L2 cache
446893-001
Intel Core Duo T7300 2.0-GHz processor with 4-MB L2 cache
446894-001
Intel Core Duo T7100 1.8-GHz processor with 2-MB L2 cache
446896-001
15.4-inch, WXGA display panel for use with HP Compaq 6710b computer models without WWAN
capability
446897-001
15.4-inch, WSXGA+ display panel for use with HP Compaq 6710b computer models without WWAN
capability
446898-001
15.4-inch, WXGA, BrightView display panel for use with HP Compaq 6710b computer models without
WWAN capability
446899-001
15.4-inch, WXGA display panel for use with HP Compaq 6710b computer models with WWAN capability
446900-001
15.4-inch, WSXGA+ display panel for use with HP Compaq 6710b computer models with WWAN
capability
446901-001
15.4-inch, WXGA display panel for use with HP Compaq 6710s computer models
446902-001
15.4-inch, WSXGA+ display panel for use with HP Compaq 6710s computer models
446903-001
15.4-inch, WXGA, BrightView display panel for use with HP Compaq 6710s computer models
446904-001
System board for use with HP Compaq 6710b computer models without WWAN capability (does not include
WWAN module slot)
446905-001
System board for use with HP Compaq 6710b computer models with WWAN capability (includes WWAN
module slot)
Sequential part number listing
43
44
Spare part
number
Description
446906-001
System board for use with HP Compaq 6710s computer models
446920-001
Heat sink for use with HP Compaq 6710 computer models (includes thermal material)
448672-002
Vodafone HSPDA WWAN module
448673-002
Cingular HSPDA WWAN module
449137-001
RTC battery
449139-001
Modem module for use with HP Compaq 6710 computer models in Japan and Asia/Pacific countries and
regions (includes modem module cable)
450066-001
Bluetooth module for use with all computer models in all countries and regions except Japan and Asia/Pacific
(includes Bluetooth module cable)
450612-001
Display enclosure for use with HP Compaq 6715s and 6710s computer models
450939-001
Mobile AMD Sempron 3800+ 2.2-GHz processor for use in all countries and regions except Japan and
Asia/Pacific (256-KB L2 cache)
450940-001
AMD Turion TL-50 1.6-GHz processor for use in all countries and regions except Japan and Asia/Pacific (1MB L2 cache)
Chapter 3 Illustrated parts catalog
4
Removal and replacement
procedures
Preliminary replacement requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
●
Flat-bladed screwdriver
●
Hex 5.0-mm nutdriver
●
Magnetic screwdriver
●
Phillips P0 and P1 screwdrivers
●
Torx T8 screwdriver
Service considerations
The following sections include some of the considerations that you must keep in mind during
disassembly and assembly procedures.
NOTE: As you remove each subassembly from the computer, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.
Plastic parts
Using excessive force during disassembly and reassembly can damage plastic parts. Use care when
handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions.
Preliminary replacement requirements
45
Cables and connectors
CAUTION: When servicing the computer, be sure that cables are placed in their proper locations
during the reassembly process. Improper cable placement can damage the computer.
Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat
or seat the cables during removal and insertion. Handle cables by the connector whenever possible. In
all cases, avoid bending, twisting, or tearing cables. Be sure that cables are routed in such a way that
they cannot be caught or snagged by parts being removed or replaced. Handle flex cables with
extreme care; these cables tear easily.
Drive handling
CAUTION: Drives are fragile components that must be handled with care. To prevent damage to the
computer, damage to a drive, or loss of information, observe these precautions:
Before removing or inserting a hard drive, shut down the computer. If you are unsure whether the
computer is off or in Hibernation, turn the computer on, and then shut it down through the operating
system.
Before handling a drive, be sure that you are discharged of static electricity. While handling a drive,
avoid touching the connector.
Before removing a diskette drive or optical drive, be sure that a diskette or disc is not in the drive and
be sure that the optical drive tray is closed.
Handle drives on surfaces covered with at least one inch of shock-proof foam.
Avoid dropping drives from any height onto any surface.
After removing a hard drive, an optical drive, or a diskette drive, place it in a static-proof bag.
Avoid exposing a hard drive to products that have magnetic fields, such as monitors or speakers.
Avoid exposing a drive to temperature extremes or liquids.
If a drive must be mailed, place the drive in a bubble pack mailer or other suitable form of protective
packaging and label the package “FRAGILE.”
46
Chapter 4 Removal and replacement procedures
Grounding guidelines
Electrostatic discharge damage
Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure
determine the degree of sensitivity. Networks built into many integrated circuits provide some
protection, but in many cases, ESD contains enough power to alter device parameters or melt
silicon junctions.
A discharge of static electricity from a finger or other conductor can destroy static-sensitive devices or
microcircuitry. Even if the spark is neither felt nor heard, damage may have occurred.
An electronic device exposed to ESD may not be affected at all and can work perfectly throughout a
normal cycle. Or the device may function normally for a while, then degrade in the internal layers,
reducing its life expectancy.
CAUTION: To prevent damage to the computer when you are removing or installing internal
components, observe these precautions:
Keep components in their electrostatic-safe containers until you area ready to install them.
Use nonmagnetic tools.
Before touching an electronic component, discharge static electricity by using the guidelines described
in this section.
Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible.
If you remove a component, place it in an electrostatic-safe container.
The following table shows how humidity affects the electrostatic voltage levels generated by different
activities.
CAUTION: A product can be degraded by as little as 700 V.
Typical electrostatic voltage levels
Relative humidity
Event
10%
40%
55%
Walking across carpet
35,000 V
15,000 V
7,500 V
Walking across vinyl floor
12,000 V
5,000 V
3,000 V
Motions of bench worker
6,000 v
800 V
400 V
Removing DIPS from plastic tube
2,000 V
700 V
400 V
Removing DIPS from vinyl tray
11,500 V
4,000 V
2,000 V
Removing DIPS from Styrofoam
14,500 V
5,000 V
3,500 V
Removing bubble pack from PCB
26,500 V
20,000 V
7,000 V
Packing PCBs in foam-lined box
21,000 V
11,000 V
5,000 V
Preliminary replacement requirements
47
Packaging and transporting guidelines
Follow these grounding guidelines when packaging and transporting equipment:
●
To avoid hand contact, transport products in static-safe tubes, bags, or boxes.
●
Protect ESD-sensitive parts and assemblies with conductive or approved containers or packaging.
●
Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.
●
Place items on a grounded surface before removing items from their containers.
●
Always be properly grounded when touching a component or assembly.
●
Store reusable ESD-sensitive parts from assemblies in protective packaging or nonconductive
foam.
●
Use transporters and conveyors made of antistatic belts and roller bushings. Be sure that
mechanized equipment used for moving materials is wired to ground and that proper materials
are selected to avoid static charging. When grounding is not possible, use an ionizer to dissipate
electric charges.
Workstation guidelines
Follow these grounding workstation guidelines:
48
●
Cover the workstation with approved static-shielding material.
●
Use a wrist strap connected to a properly grounded work surface and use properly grounded tools
and equipment.
●
Use conductive field service tools, such as cutters, screwdrivers, and vacuums.
●
When fixtures must directly contact dissipative surfaces, use fixtures made only of static-safe
materials.
●
Keep the work area free of nonconductive materials, such as ordinary plastic assembly aids and
Styrofoam.
●
Handle ESD-sensitive components, parts, and assemblies by the case or PCM laminate. Handle
these items only at static-free workstations.
●
Avoid contact with pins, leads, or circuitry.
●
Turn off power and input signals before inserting or removing connectors or test equipment.
Chapter 4 Removal and replacement procedures
Equipment guidelines
Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation.
●
When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps
with a minimum of one megohm ±10% resistance in the ground cords. To provide proper ground,
wear a strap snugly against the skin at all times. On grounded mats with banana-plug connectors,
use alligator clips to connect a wrist strap.
●
When standing, use foot straps and a grounded floor mat. Foot straps (heel, toe, or boot straps)
can be used at standing workstations and are compatible with most types of shoes or boots. On
conductive floors or dissipative floor mats, use foot straps on both feet with a minimum of one
megohm resistance between the operator and ground. To be effective, the conductive strips must
be worn in contact with the skin.
The following grounding equipment is recommended to prevent electrostatic damage:
●
Antistatic tape
●
Antistatic smocks, aprons, and sleeve protectors
●
Conductive bins and other assembly or soldering aids
●
Nonconductive foam
●
Conductive tabletop workstations with ground cords of one megohm resistance
●
Static-dissipative tables or floor mats with hard ties to the ground
●
Field service kits
●
Static awareness labels
●
Material-handling packages
●
Nonconductive plastic bags, tubes, or boxes
●
Metal tote boxes
●
Electrostatic voltage levels and protective materials
The following table lists the shielding protection provided by antistatic bags and floor mats.
Material
Use
Voltage protection level
Antistatic plastic
Bags
1,500 V
Carbon-loaded plastic
Floor mats
7,500 V
Metallized laminate
Floor mats
5,000 V
Preliminary replacement requirements
49
Unknown user password
If the computer you are servicing has an unknown user password, follow these steps to clear the
password:
NOTE: These steps also clear CMOS.
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 52).
5.
Remove the real-time clock (RTC) battery (see RTC battery on page 71).
6.
Wait approximately 5 minutes.
7.
Replace the RTC battery and reassemble the computer.
8.
Connect AC power to the computer. Do not reinsert any batteries at this time.
9.
Turn on the computer.
All passwords and all CMOS settings have been cleared.
50
Chapter 4 Removal and replacement procedures
Component replacement procedures
This chapter provides removal and replacement procedures.
There are as many as 81 screws and screw locks, in 16 different sizes, that must be removed,
replaced, or loosened when servicing the computer. Make special note of each screw and screw lock
size and location during removal and replacement.
Serial number
Report the computer serial number to HP when requesting information or ordering spare parts. The
serial number is located on the bottom of the computer.
Component replacement procedures
51
Battery
Description
Spare part number
6-cell, 2.55-Ah, 55-Wh, Li-ion battery
443885-001
6-cell, 2.20-Ah, 47-Wh, Li-ion battery
443884-001
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
Remove the battery:
1.
Turn the computer upside down on a flat surface, with the battery bay toward you.
2.
Slide the release latches (1) to release the battery.
3.
Remove the battery (2).
Install the battery by inserting it into the battery bay until you hear a click.
52
Chapter 4 Removal and replacement procedures
SIM
NOTE: This section applies only to computer models with WWAN capability.
NOTE: If there is a SIM inserted in the SIM slot, remove it before disassembling the computer. Be sure
the SIM is reinserted in the SIM slot after reassembling the computer.
Before removing the SIM, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 52).
Remove the SIM:
1.
Press in on the SIM (1). (The module is partially ejected from the SIM slot.)
2.
Remove the SIM (2) from the SIM slot.
Reverse this procedure to install the SIM.
Component replacement procedures
53
Display inverter
NOTE: If it has been determined that the display inverter is the component that must be replaced to
complete the computer repair, the display assembly does not have to be removed. Follow the
procedures in this section to replace the display inverter. For information on replacing the display
assembly and display hinges, see Display assembly on page 80.
Description
Spare part number
Display inverter (includes 2-sided tape)
446870-001
Before removing the display inverter, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 52).
Remove the display inverter:
54
1.
Turn the computer right-side up, with the front toward you.
2.
Open the computer as far as it will open.
3.
Remove the two rubber screw covers (1) on the bottom edge of the display bezel.
4.
Remove the two Torx T8M2.5×7.0 screws (2) that secure the bottom edge of the display bezel to
the display enclosure.
5.
Flex the inside edges of the left and right sides (1) and the bottom edge (2) of the display bezel
until the bezel disengages from the display enclosure.
Chapter 4 Removal and replacement procedures
6.
Release the bottom edge of the display bezel (3) from the display assembly.
7.
Release the inverter (1) from the display enclosure as far as the display panel cable and backlight
cable allow.
8.
Disconnect the display panel cable (2) and the backlight cable (3) from the display inverter.
9.
Remove the display inverter.
Reverse this procedure to install the display inverter.
Component replacement procedures
55
Hard drive
Description
Spare part number
160-GB, 5400-rpm hard drive
443920-001
120-GB, 5400-rpm hard drive
443919-001
80-GB, 7200-rpm hard drive
445939-001
80-GB, 5400-rpm hard drive
443918-001
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 52).
Remove the hard drive:
1.
Position the computer with the front toward you.
2.
Loosen the two Phillips PM2.0×5.0 screws (1) that secure the hard drive cover to the computer.
3.
Lift the left side of the hard drive cover (2), swing it to right, and remove the cover.
NOTE: The hard drive cover is included in the Plastics Kit, spare part number 443905-001.
4.
56
Loosen the Phillips PM2.5×13.0 hard drive retention screw (1) that secures the hard drive to the
computer.
Chapter 4 Removal and replacement procedures
5.
Grasp the Mylar tab (2) on the hard drive and slide the hard drive (3) to the right to disconnect it
from the system board.
6.
Remove the hard drive (4) from the hard drive bay.
7.
If it is necessary to replace the hard drive bracket, remove the two Phillips PM3.0×3.0 hard drive
bracket screws (1) from each side of the hard drive.
8.
Lift the bracket (2) straight up to remove it from the hard drive.
Reverse this procedure to reassemble and install the hard drive.
Component replacement procedures
57
Computer feet
The computer feet are adhesive-backed rubber pads. The feet are included in the Plastics Kit, spare part
number 443905-001. There are 8 rubber feet in 2 different sizes. The feet attach to the base enclosure
in the locations illustrated below.
Bluetooth module
Description
Spare part number
For use with computer models in all countries and regions except Japan and Asia/Pacific (includes
Bluetooth module cable)
398393-002
For use with computer models in Japan and Asia/Pacific countries and regions (includes Bluetooth
module cable)
450066-001
Before removing the memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 52).
Remove the Bluetooth® module:
58
1.
Position the computer with the front toward you.
2.
Loosen the Phillips PM2.0×5.0 screw (1) that secures the Bluetooth module cover to the computer.
Chapter 4 Removal and replacement procedures
3.
Lift the rear edge of the cover (2), swing it toward you, and remove the cover.
NOTE: The Bluetooth module cover is included in the Plastics Kit, spare part number
443905-001.
4.
Remove the Bluetooth module (1) from the computer.
5.
Disconnect the Bluetooth module cable (2) from the module.
6.
Remove the Bluetooth module.
Reverse this procedure to reassemble and install the Bluetooth module.
Component replacement procedures
59
Expansion memory module
Description
Spare part number
2048-MB, PC2-5300, 1-DIMM, memory module
417506-001
1024-MB, PC2-5300, 1-DIMM, memory module
414046-001
512-MB, PC2-5300, 1-DIMM, memory module
414045-001
Before removing the expansion memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 52).
Remove the expansion memory module:
1.
Loosen the Phillips PM2.0×5.0 screw (1) that secures the memory/WLAN module compartment
cover to the computer.
2.
Lift the rear edge of the cover (2), swing it toward you, and remove the cover.
NOTE: The memory/WLAN module compartment cover is included in the Plastics Kit, spare part
number 443905-001.
3.
60
Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
Chapter 4 Removal and replacement procedures
4.
Remove the memory module (2) by pulling the module away from the slot at an angle.
NOTE: Memory modules are designed with a notch (3) to prevent incorrect installation into the
memory module slot.
Reverse this procedure to install the expansion memory module.
Component replacement procedures
61
WLAN module
CAUTION: The WLAN module and WWAN module are not interchangeable.
Description
Spare part number
802.11a/b/g/n Broadcom WLAN module for use with all computer models
For use in Canada, the Cayman Islands, Guam, Puerto Rico, the United States, and the Virgin
Islands
441530-001
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua & Barbuda, Argentina,
Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados,
Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia & Herzegovina, Botswana, Brazil, the
British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde, the Central
African Republic, Chad, Chile, China, Colombia, Comoros, Congo, Costa Rica, Croatia, Cyprus,
the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador,
Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French
Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe,
Guatemala, Guinea, Guinea-Bissa, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India,
Ireland, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos,
Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar,
Malawi, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius,
Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru,
Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway,
Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru, the Philippines, Poland,
Portugal, Puerto Rico, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino,
Sao Tome & Principe Saudi Arabia, Senegal, Serbia and Montenegro, the Seychelles, Sierra Leone,
Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, Spain, Sri Lanka, St.
Kitts & Nevis, St. Lucia, St. Vincent & Gren, Suriname, Swaziland, Sweden, Switzerland, Taiwan,
Tajikistan, Tanzania, Togo, Tonga, Trinidad & Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu,
Uganda, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu,
Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
441530-002
For use in Israel and Japan
441530-291
802.11a/b/g/n Intel WLAN modules for use with HP Compaq 6710 computer models
For use in Antigua and Barbuda, Argentina, Aruba, the Bahamas, Barbados, Bermuda, Brunei,
Canada, the Cayman Islands, Chile, Colombia, Costa Rica, the Dominican Republic, Ecuador, El
Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong, India, Indonesia, Malaysia, Mexico,
Panama, Paraguay, Peru, Saudi Arabia, Taiwan, Uruguay, the United States, Venezuela, and
Vietnam
441086-001
For use in Austria, Azerbaijan, Bahrain, Belgium, Brazil, Bulgaria, Croatia, Cyprus, the Czech
Republic, Denmark, Egypt, Estonia, Finland, France, Georgia, Germany, Greece, Hungary,
Iceland, Ireland, Israel, Italy, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg, Malta,
Monaco, the Netherlands, Norway, Oman, the Philippines, Poland, Portugal, Qatar, Romania,
Russia, Serbia and Montenegro, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri Lanka,
Sweden, Switzerland, Turkey, Ukraine, the United Kingdom, and Uzbekistan
441086-002
For use in Australia, New Zealand, Pakistan, the People's Republic of China, and South Korea
441086-003
For use in Japan
441086-291
802.11a/b/g Broadcom WLAN modules for use with all computer models
For use in Canada, the Cayman Islands, Guam, Puerto Rico, the United States, and the Virgin
Islands
62
Chapter 4 Removal and replacement procedures
441075-001
Description
Spare part number
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua & Barbuda, Argentina,
Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados,
Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia & Herzegovina, Botswana,
Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde,
the Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo, Costa Rica,
Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East
Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland,
France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece,
Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissa, Guyana, Haiti, Honduras, Hong Kong,
Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya,
Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg,
Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands,
Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro,
Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New
Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New
Guinea, Paraguay, Peru, the Philippines, Poland, Portugal, the Republic of Moldova, Romania,
Russia, Rwanda, Samoa, San Marino, Sao Tome & Principe, Saudi Arabia, Senegal, Serbia and
Montenegro, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands,
Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts & Nevis, St. Lucia, St. Vincent &
Gren, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga,
Trinidad & Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab
Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire,
Zambia, and Zimbabwe
441075-002
For use in Israel and Japan
441075-291
802.11a/b/g Intel WLAN modules for use with HP Compaq 6710 computer models
For use in Antigua & Barbuda, Argentina, Aruba, the Bahamas, Barbados, Bermuda, Brunei,
Canada, the Cayman Islands, Chile, Colombia, Costa Rica, the Dominican Republic, Ecuador, El
Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong, India, Indonesia, Malaysia, Mexico,
Panama, Paraguay, Peru, Saudi Arabia, Taiwan, the United States, Uruguay, Venezuela, and
Vietnam
441082-001
For use in Austria, Azerbaijan, Bahrain, Belgium, Brazil, Bulgaria, Croatia, Cyprus, the Czech
Republic, Denmark, Egypt, Estonia, Finland, France, Georgia, Germany, Greece, Hungary,
Iceland, Ireland, Israel, Italy, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg, Malta,
Monaco, the Netherlands, Norway, Oman, the Philippines, Poland, Portugal, Qatar, Romania,
Russia, Serbia and Montenegro, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri Lanka,
Sweden, Switzerland, Turkey, Ukraine, the United Kingdom, and Uzbekistan
441082-002
For use in Australia, New Zealand, Pakistan, the People's Republic of China, and South Korea
441082-003
For use in Japan
441082-291
802.11a/b/g Intel WLAN modules for use with HP Compaq 6710 computer models
For use in Antigua and Barbuda, Argentina, Australia, the Bahamas, Barbados, Brunei, Canada,
Chile, the Dominican Republic, Guam, Guatemala, Hong Kong, India, Indonesia, Malaysia,
Mexico, New Zealand, Panama, Paraguay, Saudi Arabia, Taiwan, the United States, and Vietnam
407575-001
For use in Aruba, Austria, Azerbaijan, Bahrain, Belgium, Bermuda, Brazil, Bulgaria, the Cayman
Islands, Colombia, Croatia, Cyprus, the Czech Republic, Denmark, Egypt, El Salvador, Estonia,
Finland, France, Georgia, Germany, Greece, Hungary, Iceland, Ireland, Italy, Jordan, Latvia,
Lebanon, Liechtenstein, Lithuania, Luxembourg, Malta, Monaco, the Netherlands, Norway, Oman,
the Philippines, Poland, Portugal, Romania, Russia, Serbia and Montenegro, Singapore, Slovakia,
Slovenia, South Africa, Spain, Sri Lanka, Sweden, Switzerland, Turkey, the United Kingdom, and
Uzbekistan
407575-002
Component replacement procedures
63
Description
Spare part number
For use in Ecuador, Haiti, Honduras, Pakistan, the People's Republic of China, Peru, Qatar, South
Korea, Uruguay, and Venezuela
407575-003
For use in Japan
407575-291
802.11b/g Broadcom WLAN module for use with all computer models
For use in Canada, the Cayman Islands, Guam, Puerto Rico, the United States, and the U.S. Virgin
Islands
441060-001
For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua & Barbuda, Argentina,
Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados,
Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia & Herzegovina, Botswana,
Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon,
Cape Verde, the Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo, Costa
Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic,
East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland,
France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece,
Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissa, Guyana, Haiti, Honduras, Hong Kong,
Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan,
Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia,
Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives,
Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia,
Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether
Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan,
Palau, Panama, Papua New Guinea, Paraguay, Peru, the Philippines, Poland, Portugal, Qatar, the
Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome & Principe, Saudi
Arabia, Senegal, Serbia and Montenegro, the Seychelles, Sierra Leone, Singapore, Slovakia,
Slovenia, the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts &
Nevis, St. Lucia, St. Vincent & Gren, Suriname, Swaziland, Sweden, Switzerland, Taiwan,
Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad & Tobago, Tunisia, Turkey, Turkmenistan,
Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan,
Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
441060-002
For use in Japan
441060-291
802.11b/g Intel WLAN module for use with HP Compaq 6710 computer models in Thailand
409280-004
Before removing the WLAN module, follow these steps:
64
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 52).
5.
Remove the memory/WLAN module compartment cover (see Expansion memory module
on page 60).
Chapter 4 Removal and replacement procedures
Remove the WLAN module:
1.
Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.
NOTE: The black WLAN antenna cable is connected to the WLAN module “Main” terminal. The
white WLAN antenna cable is connected to the WLAN module “Aux” terminal. If the computer is
equipped with an 802.11a/b/g/n WLAN module, the yellow WLAN antenna cable (2) is
connected to the middle terminal on the WLAN module.
2.
Remove the two Phillips PM2.5×3.0 screws (3) that secure the WLAN module to the computer.
(The edge of the module opposite the slot rises away from the computer.)
3.
Remove the WLAN module (4) by pulling the module away from the slot at an angle.
NOTE: WLAN modules are designed with a notch (5) to prevent incorrect installation.
Reverse this procedure to install the WLAN module.
Component replacement procedures
65
Optical drive
NOTE: All optical drive spare part kits include an optical drive bezel and optical drive bracket.
Description
Spare part number
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe
443903-001
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
443904-001
DVD/CD-RW Combo Drive
443901-001
DVD-ROM drive
443902-001
Before removing the optical drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 52).
5.
Remove the memory/WLAN module compartment cover (see Expansion memory module
on page 60).
Remove the optical drive:
66
1.
Position the computer with left side toward you.
2.
Remove the Torx T8M2.5×9.0 screw (1) that secures the optical drive to the computer.
3.
Use a flat-bladed tool to push the metal tab (2) toward the left side of the computer. (The optical
drive is partially ejected from the optical drive bay.)
Chapter 4 Removal and replacement procedures
4.
Remove the optical drive (3) from the computer.
5.
If it is necessary to replace the optical drive bracket, remove the two Phillips PM2.0×3.0 screws
(1) that secure the bracket to the optical drive.
6.
Remove the optical drive bracket (2).
Reverse this procedure to reassemble and install the optical drive.
Component replacement procedures
67
Keyboard
For use in
Spare part number
For use in
Spare part number
Belgium
443811-181
Latin America
443811-161
Brazil
443811-201
Norway
443811-091
The Czech Republic
443811-221
Portugal
443811-131
Denmark
443811-081
Russia
443811-251
France
443811-051
Saudi Arabia
443811-171
French Canada
443811-121
Slovakia
443811-231
Germany
443811-041
Slovenia
443811-BA1
Greece
443811-DJ1
Spain
443811-071
Hungary
443811-211
Sweden and Finland
443811-B71
International
443811-B31
Switzerland
443811-BG1
Iceland
443811-DD1
Taiwan
443811-AB1
Israel
443811-BB1
Thailand
443811-281
Italy
443811-061
Turkey
443811-141
Japan
443811-291
The United Kingdom
443811-031
Korea
443811-AD1
The United States
443811-001
Before removing the keyboard, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 52).
5.
Remove the memory/WLAN module compartment cover (see Expansion memory module
on page 60).
Remove the keyboard:
1.
68
Position the computer with the front toward you.
Chapter 4 Removal and replacement procedures
2.
Loosen the three Phillips PM2.5×8.0 screws that secure the keyboard to the computer.
3.
Turn the computer display-side up, with the front toward you.
4.
Open the computer as far as possible.
5.
Slide the four keyboard retention tabs (1) toward you. The tabs are located between the esc and
f1 keys, between the f4 and f5 keys, between the f8 and f9 keys, and between the f12 and scroll
keys.
6.
Lift the rear edge of the keyboard (2) and swing it toward you until it rests on the palm rest.
Component replacement procedures
69
7.
Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached and
disconnect the keyboard cable (2) from the system board.
8.
Remove the keyboard.
Reverse this procedure to install the keyboard.
Internal memory module
Description
Spare part number
2048-MB, PC2-5300, 1-DIMM, memory module
417506-001
1024-MB, PC2-5300, 1-DIMM, memory module
414046-001
512-MB, PC2-5300, 1-DIMM, memory module
414045-001
Before removing the internal memory module, follow these steps:
70
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 52).
5.
Remove the memory/WLAN module compartment cover (see Expansion memory module
on page 60).
6.
Release the keyboard (see Keyboard on page 68).
Chapter 4 Removal and replacement procedures
Remove the internal memory module:
1.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
2.
Remove the memory module (2) by pulling the module away from the slot at an angle.
NOTE: Memory modules are designed with a notch (3) to prevent incorrect installation into the
memory module slot.
Reverse this procedure to install the internal memory module.
RTC battery
NOTE: Removing the RTC battery and leaving it uninstalled for 5 or more minutes causes all
passwords and CMOS settings to be cleared.
Description
Spare part number
RTC battery
449137-001
Before removing the RTC battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 52).
5.
Remove the memory/WLAN module compartment cover (see Expansion memory module
on page 60).
6.
Release the keyboard (see Keyboard on page 68).
Component replacement procedures
71
Remove the RTC battery:
▲
Use a non-conductive, flat-bladed tool to pry the RTC battery out of the slot.
Reverse this procedure to install the RTC battery. Be sure the RTC battery is installed with the “+” sign
facing up.
WWAN module
CAUTION: The WWAN module and WLAN module are not interchangeable.
Description
Spare part number
EVDO WWAN module
399440-001
Vodafone HSPDA WWAN module
448672-002
Cingular HSPDA WWAN module
448673-002
Before removing the WWAN module, follow these steps:
72
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 52).
5.
Remove the memory/WLAN module compartment cover (see Expansion memory module
on page 60).
6.
Release the keyboard (see Keyboard on page 68).
Chapter 4 Removal and replacement procedures
Remove the WWAN module:
1.
Disconnect the WWAN antenna cables (1) from the terminals on the WWAN module.
NOTE: The red WWAN antenna cable is connected to the WWAN module “Main” terminal.
The blue WWAN antenna cable is connected to the WWAN module “Aux” terminal. If the
computer is equipped with an HSPDA WWAN module, the red WWAN antenna cable is
connected to the only terminal on the module.
2.
Remove the two Phillips PM2.5×3.0 screws (2) that secure the WWAN module to the computer.
(The edge of the module opposite the slot rises away from the computer.)
3.
Remove the WWAN module (3) by pulling the module away from the slot at an angle.
NOTE: WWAN modules are designed with a notch (4) to prevent incorrect installation.
Reverse this procedure to install the WWAN module.
Component replacement procedures
73
Switch cover
Description
Spare part number
Switch cover for use with HP Compaq 6715b and 6710b computer models (includes power button
board and cable and LED board and cable)
443911-001
Switch cover for use with HP Compaq 6715s and 6710s computer models (includes power button
board and cable, but does not include LED board and cable)
443910-001
Before removing the switch cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 52).
5.
Release the keyboard (see Keyboard on page 68).
Remove the switch cover:
NOTE: Step 1 applies only to HP Compaq 6715b and 6710b computer models.
1.
Release the ZIF connector (1) to which the LED board cable is attached and disconnect the LED
board cable (2) from the system board.
2.
Insert a flat-bladed tool into one of the four slots (3) in the switch cover and lift the switch cover
(4) until it disengages from the computer.
3.
Remove the switch cover.
Reverse this procedure to install the switch cover.
74
Chapter 4 Removal and replacement procedures
Fan
Description
Spare part number
Fan
443917-001
Before removing the fan, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 52).
5.
Release the keyboard (see Keyboard on page 68).
6.
Remove the switch cover (see Switch cover on page 74).
Remove the fan:
1.
Disconnect the fan cable (1) from the system board.
NOTE: The illustration below shows the fan removal steps for the HP Compaq 6715 computer
model. The fan cable on the HP Compaq 6710 computer model is in a different location, but the
disconnection steps are the same.
2.
Loosen the Phillips PM2.5×8.0 captive screw (2) that secures the fan to the computer.
3.
Remove the Phillips PM2.5×8.0 screw (3) that secures the fan to the computer.
4.
Remove the fan (4).
Reverse this procedure to install the fan.
Component replacement procedures
75
NOTE: To properly ventilate the computer, allow at least a 7.6-cm (3-inch) clearance on the left and
right sides of the computer.
The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is
designed to turn on automatically when high temperature conditions exist. These conditions are affected
by high external temperatures, system power consumption, power management/battery conservation
configurations, battery fast charging, and software applications. Exhaust air is displaced through the
ventilation grill located on the left side of the computer.
Heat sink
NOTE: All heat sink spare part kits include thermal material.
Description
Spare part number
For use with HP Compaq 6715 computer models
443912-001
For use with HP Compaq 6710 computer models
446920-001
Thermal Material Kit for use in all countries and regions except Japan and Asia/Pacific
413706-001
Thermal Material Kit for use in Japan and Asia/Pacific countries and regions
445853-001
Before removing the heat sink, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 52).
5.
Release the keyboard (see Keyboard on page 68).
6.
Remove the switch cover (see Switch cover on page 74).
7.
Remove the internal memory module (see Internal memory module on page 70). This step applies
only to HP Compaq 6710 computer models.
8.
Remove the fan (see Fan on page 75).
Remove the heat sink:
76
Chapter 4 Removal and replacement procedures
NOTE: Step 1 applies to HP Compaq 6715 computer models. The heat sink on HP Compaq 6710
computer models is secured to the computer by captive screws which must be loosened rather than
removed.
1.
Remove the four Phillips PM2.0×6.0 screws (1) that secure the heat sink to the system board.
2.
Release the heat sink (2) by lifting the right side until it disengages from the processor.
NOTE: Due to the adhesive quality of the thermal material located between the heat sink and
processor, it may be necessary to move the heat sink from side to side to detach the heat sink from
the processor.
3.
Remove the heat sink (3) by swinging it counterclockwise until the left side of the heat sink clears
the top cover.
NOTE: The thermal material must be thoroughly cleaned from the surfaces of the heat sink (1)
and the processor and system board components (2) each time the heat sink is removed. Thermal
material is included with all heat sink and processor spare part kits.
Reverse this procedure to install the heat sink.
Component replacement procedures
77
Processor
NOTE: All processor spare part kits include thermal material.
Description
Spare part number
Processors for use with HP Compaq 6715 computer models in all countries and regions except Japan and Asia/Pacific:
AMD Turion TL-64, 2.2-GHz processor (1-MB L2 cache)
443913-001
AMD Turion MK-38, 2.2-GHz processor (512-KB L2 cache)
446045-001
AMD Turion TL-60, 2.0-GHz processor (1-MB L2 cache)
430876-001
AMD Turion TL-56, 1.8-GHz processor (1-MB L2 cache)
430875-001
AMD Turion TL-52, 1.6-GHz processor (1-MB L2 cache)
430874-001
AMD Turion TL-50, 1.6-GHz processor (1-MB L2 cache)
450939-001
Mobile AMD Sempron 3800+ 2.2-GHz processor (256-KB L2 cache)
450940-001
Mobile AMD Sempron 3600+ 2.0-GHz processor (256-KB L2 cache)
443916-001
Mobile AMD Sempron 3500+ 1.8-GHz processor (512-KB L2 cache)
430872-001
Mobile AMD Sempron 3400+ 1.8-GHz processor (256-KB L2 cache)
430871-001
Processors for use with HP Compaq 6715 computer models in Japan and Asia/Pacific countries and regions
AMD Turion TL-60, 2.0-GHz processor (1-MB L2 cache)
443892-001
AMD Turion TL-56, 1.8-GHz processor (1-MB L2 cache)
443891-001
AMD Turion TL-52, 1.6-GHz processor (1-MB L2 cache)
443890-001
Mobile AMD Sempron 3500+ 1.8-GHz processor (512-KB L2 cache)
443915-001
Mobile AMD Sempron 3400+ 1.8-GHz processor (256-KB L2 cache)
443914-001
Processors for use with HP Compaq 6710 computer models
Intel Core Duo T7700 2.4-GHz processor (4-MB L2 cache)
446894-001
Intel Core Duo T7500 2.2-GHz processor (4-MB L2 cache)
446893-001
Intel Core Duo T7300 2.0-GHz processor (4-MB L2 cache)
446892-001
Intel Core Duo T7100 1.8-GHz processor (2-MB L2 cache)
446891-001
Before removing the processor, follow these steps:
78
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 52).
Chapter 4 Removal and replacement procedures
5.
Release the keyboard (see Keyboard on page 68).
6.
Remove the switch cover (see Switch cover on page 74).
7.
Remove the fan (see Fan on page 75).
8.
Remove the heat sink (see Heat sink on page 76).
Remove the processor:
1.
Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn
counterclockwise until you hear a click.
2.
Lift the processor (2) straight up and remove it.
NOTE: The gold triangle (3) on the processor must be aligned with the triangle (4) embossed
on the processor slot when you install the processor. The illustration below shows the processor
removal steps for the HP Compaq 6715 computer model.
NOTE: The illustration below shows the processor removal steps for the HP Compaq 6710
computer model.
Reverse this procedure to install the processor.
Component replacement procedures
79
Display assembly
Description
Spare part number
15.4-inch, WSXGA+ display assembly for use with HP Compaq 6715b and 6710b computer
models with WWAN capability
443814-001
15.4-inch, WXGA display assembly for use with HP Compaq 6715b and 6710b computer models
with WWAN capability
443817-001
15.4-inch, WXGA, BrightView display assembly for use with HP Compaq 6715b and 6710b
computer models without WWAN capability
443816-001
15.4-inch, WSXGA+ display assembly for use with HP Compaq 6715b and 6710b computer
models without WWAN capability
443813-001
15.4-inch, WXGA display assembly for use with HP Compaq 6715b and 6710b computer models
without WWAN capability
443815-001
15.4-inch, WXGA, BrightView display assembly for use with HP Compaq 6715s and 6710s
computer models
443812-001
15.4-inch, WSXGA+ display assembly for use with HP Compaq 6715s and 6710s computer
models
443818-001
15.4-inch, WXGA display assembly for use with HP Compaq 6715s and 6710s computer models
443819-001
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 52).
5.
Remove the memory/WLAN module compartment cover (see Expansion memory module
on page 60).
6.
Disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 62).
7.
Remove the following components:
a.
Keyboard (see Keyboard on page 68)
b.
Switch cover (see Switch cover on page 74)
Remove the display assembly:
1.
80
Disconnect the display panel cable (1) from the system board.
Chapter 4 Removal and replacement procedures
2.
Remove the wireless antenna cables (2) from the routing channels and clips built into the top
cover.
3.
Remove the two Torx T8M2.5×9.0 screws (1) that secure the display assembly to the computer.
NOTE: The screw removed from the left hinge secures a ground loop (2) for the display panel
cable.
4.
Position the computer with the rear panel toward you.
5.
Remove the four Torx T8M2.5×9.0 screws (1) that secure the display assembly to the computer.
Component replacement procedures
81
6.
Lift the display assembly straight up and remove it (2).
CAUTION: When installing the display assembly, be sure that the 4 wireless antenna cables
routed out of the display right hinge are routed and arranged properly. Each antenna cable has
an exposed section of cable (1) and a metallic grounding sleeve (2). The grounding sleeve must
completely cover the exposed section of cable. Each cable must be secured inside a space in the
copper grounding clip (3). Left to right, the cables must be installed in a red, white, black, blue
sequence.
Failure to follow these routing instructions can result in degradation of the computer's WLAN and
WWAN performance.
82
Chapter 4 Removal and replacement procedures
7.
If it is necessary to replace the display hinges, remove the following:
(1) Four rubber screw covers from the display bezel top edge
(2) Four Torx T8M2.5×6.0 screws from the display bezel top edge
(3) Two rubber screw covers from the display bezel bottom edge
(4) Two Torx T8M2.5×7.0 screws from the display bezel top edge
8.
Flex the inside edges of the left and right sides (1) and the top and bottom sides (2) of the display
bezel until the bezel disengages from the display enclosure.
9.
Remove the display bezel (3).
NOTE: The display bezel is available using spare part number 446871-001.
10. Remove the four Torx T8M2.5×6.0 screws (1) that secure the display panel to the display
enclosure.
Component replacement procedures
83
11. Remove the display panel (2).
12. Remove the four Phillips PM2.0×3.0 screws (1) that secure each display hinge to the display
panel.
13. Remove the display hinges (2).
NOTE: The left and right display hinges are available using spare part number 446882-001.
Reverse this procedure to reassemble and install the display assembly.
84
Chapter 4 Removal and replacement procedures
Top cover
Description
Spare part number
Top cover for use with HP Compaq 6715b and 6710b computer models (includes TouchPad and
cable and fingerprint reader)
443822-001
Top cover for use with HP Compaq 6715s and 6710s computer models (includes TouchPad and
cable)
443823-001
Before removing the top cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 52).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 56)
b.
Memory/WLAN module compartment cover (see Expansion memory module on page 60)
c.
Optical drive (see Optical drive on page 66)
d.
Keyboard (see Keyboard on page 68)
e.
Switch cover (see Switch cover on page 74)
f.
Display assembly (see Display assembly on page 80)
Remove the top cover:
1.
Turn the computer upside down, with the rear panel toward you.
2.
Remove the thirteen Torx T8M2.5×9.0 screws (1) that secure the top cover to the computer.
Component replacement procedures
85
3.
Remove the two HM5.0×9.0 screw locks (2) that secure the top cover to the computer.
4.
Turn the computer right-side up, with the front toward you.
5.
Disconnect the TouchPad cable (1) from the system board.
NOTE: Step 6 applies only to HP Compaq 6715b and 6710b computer models.
86
6.
Disconnect the fingerprint reader board cable (2) from the system board.
7.
Remove the microphone (3) from the clip built into the top cover and remove the microphone
cable from the clips built into the top cover.
Chapter 4 Removal and replacement procedures
8.
Remove the three Torx T8M2.5×9.0 screws that secure the top cover to the computer.
9.
Lift the rear edge of the top cover (1) until it disengages from the base enclosure.
10. Swing the rear edge of the top cover (2) toward you until it rests at an angle.
11. Lift the top cover (3) straight up and remove it.
12. If it is necessary to replace the microphone and cable, disconnect the microphone cable (1) from
the PC Card/audio board assembly and remove it.
NOTE: The microphone is available in the Cable Kit, spare part number 443887-001.
Component replacement procedures
87
13. If it is necessary to replace the Bluetooth module cable, disconnect the cable (2) from the system
board and remove the cable from the opening (3) in the base enclosure.
NOTE: The Bluetooth module cable is included with the Bluetooth module, spare part numbers
398393-002 (for use with all computer models in all countries and regions except Japan and
Asia/Pacific) and 450066-001 (for use with all computer models in all countries and regions
except Japan and Asia/Pacific), and is also available in the Cable Kit, spare part number
443887-001.
14. If it is necessary to replace the modem module cable, disconnect the cable (1) from the modem
module and the system board (2), and remove the modem connector (3) from the clip built into
the base enclosure.
NOTE: The modem module cable is available in the Cable Kit, spare part number 443887-001.
Reverse this procedure to install the top cover, microphone, Bluetooth module cable, and modem
module cable.
88
Chapter 4 Removal and replacement procedures
Speaker assembly
Description
Spare part number
Speaker assembly
443821-001
Before removing the speaker assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 52).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 56)
b.
Memory/WLAN module compartment cover (see Expansion memory module on page 60)
c.
Optical drive (see Optical drive on page 66)
d.
Keyboard (see Keyboard on page 68)
e.
Switch cover (see Switch cover on page 74)
f.
Display assembly (see Display assembly on page 80)
g.
Top cover (see Top cover on page 85)
Remove the speaker assembly:
1.
Disconnect the speaker cable (1) from the PC Card/audio board assembly.
2.
Remove the two Phillips PM2.5×5.0 screws (2) that secure the speaker assembly to the base
enclosure.
Component replacement procedures
89
3.
Remove the speaker assembly (3).
Reverse this procedure to install the speaker assembly.
USB/Media Card Reader board
NOTE: This section applies only to HP Compaq 6715b and 6710b computer models.
Description
Spare part number
USB/Media Card Reader board (includes USB/Media Card Reader board cable)
443883-001
Before removing the USB/Media Card Reader board, follow these steps:
90
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 52).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 56)
b.
Memory/WLAN module compartment cover (see Expansion memory module on page 60)
c.
Optical drive (see Optical drive on page 66)
d.
Keyboard (see Keyboard on page 68)
e.
Switch cover (see Switch cover on page 74)
Chapter 4 Removal and replacement procedures
f.
Display assembly (see Display assembly on page 80)
g.
Top cover (see Top cover on page 85)
Remove the USB/Media Card Reader board:
1.
Disconnect the USB/Media Card Reader board cable (1) from the system board.
2.
Remove the three Phillips PM2.5×5.0 screws (2) that secure the USB/Media Card Reader board
to the computer.
3.
Lift the USB/Media Card Reader board (3) straight up and remove it.
Reverse this procedure to install the USB/Media Card Reader board.
Component replacement procedures
91
System board
Description
Spare part number
System board for use with HP Compaq 6715b computer models with WWAN capability (includes
WWAN module slot)
443896-001
System board for use with HP Compaq 6715b computer models without WWAN capability (does
not include WWAN module slot)
443898-001
System board for use with HP Compaq 6715s computer models
443897-001
System board for use with HP Compaq 6710b computer models with WWAN capability (includes
WWAN module slot)
446905-001
System board for use with HP Compaq 6710b computer models without WWAN capability (does
not include WWAN module slot)
446904-001
System board for use with HP Compaq 6710s computer models
446906-001
Before removing the system board, follow these steps:
92
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 52).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 56)
b.
Memory/WLAN module compartment cover (see Expansion memory module on page 60)
c.
Optical drive (see Optical drive on page 66)
d.
Keyboard (see Keyboard on page 68)
e.
Switch cover (see Switch cover on page 74)
f.
Fan (see Fan on page 75)
g.
Heat sink (see Heat sink on page 76)
h.
Display assembly (see Display assembly on page 80)
i.
Top cover (see Top cover on page 85)
Chapter 4 Removal and replacement procedures
Remove the system board:
1.
Press the PC Card eject button (1) twice. The first press releases the PC Card eject button from the
PC Card slot. The second press releases the PC Card slot bezel from the PC Card slot. (The PC
Card slot bezel is partially ejected from the PC Card slot.)
NOTE: The PC Card slot bezel is included in the Plastics Kit, spare part number 443905-001.
2.
Remove the PC Card slot bezel (2).
3.
Disconnect the USB/Media Card Reader board cable (3) from the system board.
Component replacement procedures
93
4.
Remove the following screws:
(1) Two Phillips PM2.5×5.0 screws that secure the system board and PC Card/audio board
assembly
(2) One Phillips PM2.5×5.0 screw that secures the system board
(3) Two Phillips PM2.5×5.0 screws that secure the optical drive connector board
(4) Two Phillips PM2.5×3.0 screws that secure the system board
NOTE: If the computer is equipped with a WWAN module, another Phillips PM2.5×5.0 screw
(5) that secures the SIM slot board must be removed.
94
5.
Use the right side of the system board (1) immediately behind the optical drive connector to lift the
right side of the system board (2) until the rear left corner of the system board (3) clears the base
enclosure.
6.
Remove the system board (4) by pulling it away from the top cover at an angle until it clears the
top cover.
Chapter 4 Removal and replacement procedures
7.
If it is necessary to replace the optical drive connector board, pull the board away from the system
board until it disconnects from the system board.
NOTE: The optical drive connector board is available using spare part number 443820-001.
When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
●
SIM (see SIM on page 53)
●
Memory modules (see Expansion memory module on page 60 and Internal memory module
on page 70)
●
WLAN module (see WLAN module on page 62)
●
RTC battery (see RTC battery on page 71)
●
WWAN module (see WWAN module on page 72)
●
Processor (see Processor on page 78)
●
PC Card/audio board assembly (see PC Card/audio board assembly on page 95)
●
Modem module (see Modem module on page 97)
●
SIM slot board (see SIM slot board on page 99)
Reverse the preceding procedure to install the system board.
PC Card/audio board assembly
Description
Spare part number
For use with HP Compaq 6715b and 6710b computer models
443889-001
For use with HP Compaq 6715s and 6710s computer models
443888-001
Component replacement procedures
95
Before removing the PC Card/audio board assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 52).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 56)
b.
Memory/WLAN module compartment cover (see Expansion memory module on page 60)
c.
Optical drive (see Optical drive on page 66)
d.
Keyboard (see Keyboard on page 68)
e.
Switch cover (see Switch cover on page 74)
f.
Fan (see Fan on page 75)
g.
Heat sink (see Heat sink on page 76)
h.
Display assembly (see Display assembly on page 80)
i.
Top cover (see Top cover on page 85)
j.
System board (see System board on page 92)
Remove the PC Card/audio board assembly:
96
1.
Remove the Phillips PM2.5×5.0 screw (1) that secures the PC Card/audio board assembly to the
system board.
2.
Lift the left side of the PC Card/audio board assembly (2) until it disengages from the system
board.
Chapter 4 Removal and replacement procedures
3.
Remove the PC Card/audio board assembly (3) by pulling it away from the system board at an
angle.
Reverse this procedure to install the PC Card/audio board assembly.
Modem module
NOTE: All modem module spare part kits include a modem module cable.
Description
Spare part number
For use with HP Compaq 6715 computer models and with HP Compaq 6710 computer models in
all countries and regions except Japan and Asia/Pacific
441074-001
For use with HP Compaq 6710 computer models in Japan and Asia/Pacific countries and regions
449139-001
Before removing the modem module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 52).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 56)
b.
Memory/WLAN module compartment cover (see Expansion memory module on page 60)
c.
Optical drive (see Optical drive on page 66)
d.
Keyboard (see Keyboard on page 68)
Component replacement procedures
97
e.
Switch cover (see Switch cover on page 74)
f.
Fan (see Fan on page 75)
g.
Heat sink (see Heat sink on page 76)
h.
Display assembly (see Display assembly on page 80)
i.
Top cover (see Top cover on page 85)
j.
System board (see System board on page 92)
k.
PC Card/audio board assembly (see PC Card/audio board assembly on page 95)
Remove the modem module:
1.
Turn the PC Card/audio board assembly upside down.
2.
Remove the two Phillips PM2.5×3.0 screws (1) that secure the modem module to the PC Card/
audio board assembly.
3.
Lift the modem module (2) straight up and remove it.
Reverse this procedure to install the modem module.
98
Chapter 4 Removal and replacement procedures
SIM slot board
NOTE: This section applies only to HP Compaq 6715b and 6710b computer models with WWAN
capability.
Description
Spare part number
SIM slot board
443907-001
Before removing the SIM slot board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see Battery on page 52).
5.
Remove the following components:
a.
Hard drive (see Hard drive on page 56)
b.
Memory/WLAN module compartment cover (see Expansion memory module on page 60)
c.
Optical drive (see Optical drive on page 66)
d.
Keyboard (see Keyboard on page 68)
e.
Switch cover (see Switch cover on page 74)
f.
Fan (see Fan on page 75)
g.
Heat sink (see Heat sink on page 76)
h.
Display assembly (see Display assembly on page 80)
i.
Top cover (see Top cover on page 85)
j.
System board (see System board on page 92)
Remove the SIM slot board:
1.
Turn the system board right-side up, with the front toward you.
Component replacement procedures
99
2.
Lift the SIM slot board (1) straight up and remove it, making note of the location of the pins (2) on
the SIM slot board and their alignment with the system board.
Reverse this procedure to install the SIM slot board.
100
Chapter 4 Removal and replacement procedures
5
Computer Setup
Starting Computer Setup
Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating system
is not working or will not load.
NOTE: Some of the Computer Setup menu items listed in this guide may not be supported by your
computer.
NOTE: Pointing devices are not supported in Computer Setup. You must use the keyboard to navigate
and make selections.
NOTE: An external keyboard connected by USB can be used with Computer Setup only if USB
legacy support is enabled.
To start Computer Setup:
1.
Turn on or restart the computer.
2.
Before Windows opens and while the “F10=ROM Based Setup” message is displayed in the
lower-left corner of the screen, press f10.
Starting Computer Setup
101
Using Computer Setup
Navigating and selecting in Computer Setup
The information and settings in Computer Setup are accessed from the File, Security, Diagnostics, and
System Configuration menus.
1.
Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the
"F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.
Because Computer Setup is not Windows-based, it does not support the TouchPad. Navigation
and selection are by keystroke:
●
To choose a menu or a menu item, use the arrow keys.
●
To select an item, press enter.
●
To close open dialog boxes and return to the main Computer Setup screen, press esc.
●
To view navigation information, press f1.
●
To change the language, press f2.
2.
Select the File, Security, Diagnostics, or System Configuration menu.
3.
To exit Computer Setup, choose one of the following methods:
●
To exit Computer Setup without saving your preferences, use the arrow keys to select File >
Ignore Changes and Exit. Then follow the instructions on the screen.
●
To save your preferences and exit Computer Setup, use the arrow keys to select File > Save
Changes and Exit. Then follow the instructions on the screen.
Your preferences go into effect when the computer restarts.
Restoring factory settings in Computer Setup
To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1.
Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the
"F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select File > Restore defaults, and then press enter.
3.
When the confirmation dialog box opens, press f10.
4.
To save your preferences and exit Computer Setup, use the arrow keys to select File > Save
Changes and Exit. Then follow the instructions on the screen.
Your preferences go into effect when the computer restarts.
NOTE: Your password settings and security settings are not changed when you restore the
factory settings.
102
Chapter 5 Computer Setup
Computer Setup menus
The menu tables in this section provide an overview of Computer Setup options.
NOTE: Some of the Computer Setup menu items listed in this chapter may not be supported by your
computer.
File menu
Select
To do this
System information
●
View identification information for the computer and the batteries in the
system.
●
View specification information for the processor, cache and memory size,
system ROM, video revision, and keyboard controller version.
Restore defaults
Replace the configuration settings in Computer Setup with the original factory
settings. (Password settings and security settings are not changed when you
restore the factory settings.)
Ignore changes and exit
Cancel any changes entered during the current session. Then exit and restart the
computer.
Save changes and exit
Save any changes entered during the current session. Then exit and restart the
computer. Your changes go into effect when the computer restarts.
Computer Setup menus
103
Security menu
Select
To do this
Setup password
Enter, change, or delete a setup password.
Power-On password
Enter, change, or delete a power-on password.
Password options
●
Enable/disable stringent security.
●
Enable/disable password requirement on computer restart.
●
Enable/disable DriveLock on any computer hard drive and on optional
MultiBay hard drives.
●
Change a DriveLock user password or master password.
DriveLock passwords
NOTE: DriveLock settings are accessible only when you enter Computer Setup
by turning on (not restarting) the computer.
Smart Card security
Enable/disable support for smart card and Java™ Card power-on authentication.
NOTE: Power-on authentication for smart cards is supported only on computers
with optional smart card readers.
NOTE: You must have an administrator password to change this setting.
TPM Embedded Security
Enable/disable support for Trusted Platform Module (TPM) Embedded Security,
which protects the computer from unauthorized access to owner functions
available in Embedded Security for ProtectTools. For more information, refer to
the ProtectTools Help.
NOTE: You must have a setup password to change this setting.
System IDs
Enter user-defined computer asset tracking number and ownership tag.
Disk Sanitizer
Run Disk Sanitizer to destroy all existing data on the primary hard drive. The
following options are available:
●
Fast: Runs the Disk Sanitizer erase cycle once.
●
Optimum: Runs the Disk Sanitizer erase cycle 3 times.
●
Custom: Allows you to select the desired number of Disk Sanitizer erase
cycles from a list.
CAUTION: If you run Disk Sanitizer, the data on the primary hard drive is
destroyed permanently.
Diagnostics menu
104
Select
To do this
Hard Drive Self-Test options
Run a comprehensive self-test on any hard drive in the system or on any optional
MultiBay hard drive.
Memory Check
Run a comprehensive check on system memory.
Startup Check (select models only)
Verify the system components needed for starting the computer.
Chapter 5 Computer Setup
System Configuration menu
NOTE: Some of the listed System Configuration options may not be supported by your computer.
Select
To do this
Language (or press f2)
Change the Computer Setup language.
Boot options
●
Set f9, f10, and f12 delay when starting up.
●
Enable/disable CD-ROM boot.
●
Enable/disable floppy boot.
●
Enable/disable internal network adapter boot and set the boot mode (PXE
or RPL).
●
Enable/disable MultiBoot, which sets a boot order that can include most
boot devices in the system.
●
Set the Express Boot Popup delay in seconds.
●
Set the boot order.
Computer Setup menus
105
106
Select
To do this
Device configurations
●
Swap the functions of the fn key and left ctrl key.
●
Enable/disable multiple standard pointing devices at startup. (To set the
computer to support only a single, usually nonstandard, pointing device at
startup, select Disable.)
●
Enable/disable USB legacy support. When enabled, USB legacy support
allows the following:
Chapter 5 Computer Setup
◦
Use of a USB keyboard, mouse, and hub in Computer Setup even
when a Windows operating system is not running.
◦
Startup from bootable USB devices, including a hard drive, diskette
drive, or optical drive connected by a USB port to the computer or to
an optional docking device (select models only).
●
Select a parallel port mode: EPP (Enhanced Parallel Port), standard,
bidirectional, or ECP (Enhanced Capabilities Port).
●
Enable/disable BIOS DMA data transfers.
●
Enable/disable fan always on while connected to an AC outlet.
●
Enable/disable Intel® Data Execution Prevention or AMD® PSAE Execution
Disable. When enabled, the processor can disable some virus code
execution, which helps to improve computer security.
●
Enable/disable LAN Power Save. When enabled, saves power by turning
off the LAN when not in use.
●
Enable/disable SATA Native Mode.
●
Enable/disable Dual Core CPU.
●
Enable/disable Secondary Battery Fast Charge.
●
Choose Bit-shift or LBA assisted HDD Translation Mode.
●
Enable/disable Windows direct application launcher.
●
Enable/disable HP Lockout.
Select
To do this
Built-In Device Options
●
Enable/disable embedded WWAN Device Radio.
●
Enable/disable embedded WLAN Device Radio.
●
Enable/disable embedded Bluetooth® Device Radio.
●
Enable/disable LAN/WLAN Switching. When enabled, switches to a
WLAN when a LAN is either unavailable or disconnected.
●
Enable/disable Wake on LAN from Off.
●
Enable/disable the ambient light sensor.
●
Enable/disable the serial port.
●
Enable/disable the parallel port.
●
Enable/disable the flash media reader.
●
Enable/disable the USB port.
Port Options
CAUTION: Disabling the USB port also disables MultiBay devices and
ExpressCard devices on the advanced port replicator.
●
Enable/disable the 1394 port.
●
Enable/disable the cardbus slot.
●
Enable/disable the ExpressCard slot.
●
Enable/disable the infrared port.
●
Enable/disable the optical disk drive.
●
Enable/disable the network controller.
Computer Setup menus
107
6
Specifications
Computer specifications
Metric
U.S.
Height (front to back)
3.49 to 4.05 cm
1.37 to 1.59 in
Width
35.7 cm
14.05 in
Depth
26.5 cm
10.43 in
Weight (with optical drive, hard drive, and battery)
2.75 kg
6.06 lbs
Dimensions
Input power
Operating voltage
19.0 V dc @ 4.74 A – 90 W
Operating current
4.74 A
Temperature
Operating (not writing to optical disc)
0°C to 35°C
32°F to 95°F
Operating (writing to optical disc)
5°C to 35°C
41°F to 95°F
Nonoperating
-20°C to 60°C
-4°F to 140°F
Relative humidity
Operating
10% to 90%
Nonoperating
5% to 95%
Maximum altitude (unpressurized)
Operating (14.7 to 10.1 psia)
-15 m to 3,048 m
-50 ft to 10,000 ft
Nonoperating (14.7 to 4.4 psia)
-15 m to 12,192 m
-50 ft to 40,000 ft
Shock
Operating
125 g, 2 ms, half-sine
Nonoperating
200 g, 2 ms, half-sine
Random vibration
108
Chapter 6 Specifications
Metric
U.S.
Operating
0.75 g zero-to-peak, 10 Hz to 500 Hz, 0.25 oct/min
sweep rate
Nonoperating
1.50 g zero-to-peak, 10 Hz to 500 Hz, 0.5 oct/min
sweep rate
NOTE: Applicable product safety standards specify thermal limits for plastic surfaces. The computer operates well within this
range of temperatures.
15.4-inch, WSXGA display specifications
Metric
U.S.
Height
20.7 cm
8.15 in
Width
33.1 cm
13.03 in
Diagonal
39.1 cm
15.39 in
Number of colors
Up to 16.8 million
Contrast ratio
200:1 (typical)
Brightness
180 nits (typical)
Dimensions
Pixel resolution
Pitch
0.197 × 0.197 mm
Format
1680 × 1050
Configuration
RGB vertical stripe
Backlight
CCFT
Character display
80 × 25
Total power consumption
7.0 W
Viewing angle
+/-40° horizontal, +/-50° vertical (typical)
15.4-inch, WSXGA display specifications
109
15.4-inch, WXGA display specifications
Metric
U.S.
Height
20.7 cm
8.15 in
Width
33.1 cm
13.03 in
Diagonal
39.1 cm
15.39 in
Number of colors
Up to 16.8 million
Contrast ratio
200:1 (typical)
Brightness
180 nits (typical)
Dimensions
Pixel resolution
110
Pitch
0.259 × 0.259 mm
Format
1440 × 900
Configuration
RGB vertical stripe
Backlight
CCFT
Character display
80 × 25
Total power consumption
6.5 W
Viewing angle
+/-45° horizontal, +15/-35° vertical (typical)
Chapter 6 Specifications
Hard drive specifications
160-GB*
120-GB*
80-GB*
Height
9.5 mm
9.5 mm
9.5 mm
Width
70 mm
70 mm
70 mm
Weight
101 g
101 g
101 g
Interface type
SATA
SATA
SATA
Transfer rate
100 MB/sec
100 MB/sec
100 MB/sec
Security
ATA security
ATA security
ATA security
Dimensions
Seek times (typical read, including setting)
Single track
3 ms
3 ms
3 ms
Average
13 ms
13 ms
13 ms
Maximum
24 ms
24 ms
24 ms
Logical blocks
312,560,640
234,420,480
156,280,320
Disc rotational speed
5400 rpm
5400 rpm
7200 and 5400 rpm
Operating temperature
5°C to 55°C (41°F to 131°F)
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive
specifications may differ slightly.
NOTE:
Certain restrictions and exclusions apply. Contact technical support for details.
Hard drive specifications
111
Primary 6-cell, Li-ion battery specifications
Metric
U.S.
Height
2.0 cm
0.79 in
Width
20.3 cm
7.99 in
Depth
5.3 cm
2.09 in
Weight
0.34 kg
0.75 lb
Dimensions
Energy
Voltage
14.4 V
Amp-hour capacity
2.2 Ah and 2.55 Ah
Watt-hour capacity
47 Wh and 55Wh
Temperature
112
Operating
5°C to 45°C
41°F to 113°F
Nonoperating
0°C to 60°C
32°F to 140°F
Chapter 6 Specifications
DVD±RW and CD-RW Super Multi Double-Layer
Combo Drive specifications
Applicable disc
Center hole diameter
Read:
Write:
CD-DA, CD+(E)G, CD-MIDI, CD-TEXT,
CD-ROM, CD-ROM XA, MIXED MODE
CD, CD-I, CD-I Bridge (Photo-CD, Video
CD), Multisession CD (Photo-CD, CDEXTRA, Portfolio, CD-R, CD-RW), CD-R,
CD-RW, DVD-ROM (DVD-5, DVD-9,
DVD-10, DVD-18), DVD-R, DVD-RW,
DVD+R, DVD+RW, DVD-RAM
CD-R and CD-RW
DVD+R, DVD+RW, DVD-R, DVD-RW,
DVD-RAM
1.5 cm (0.59 in)
Disc diameter
Standard disc
12 cm (4.72 in)
Mini disc
8 cm (3.15 in)
Disc thickness
1.2 mm (0.047 in)
Track pitch
0.74 µm
Access time
CD
DVD
Random
< 175 ms
< 230 ms
Full stroke
< 285 ms
< 335 ms
Audio output level
Line-out, 0.7 Vrms
Cache buffer
2 MB
Data transfer rate
24X CD-ROM
3,600 KB/sec
8X DVD-ROM
10,800 KB/sec
24X CD-R
3,600 KB/sec
16X CD-RW
2,400 KB/sec
8X DVD+R
10,800 KB/sec
4X DVD+RW
5,400 KB/sec
8X DVD-R
10,800 KB/sec
4X DVD-RW
5,400 KB/sec
2.4X DVD+R(9)
2,700 KB/sec
5X DVD-RAM
6,750 KB/sec
Transfer mode
Multiword DMA Mode
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive specifications
113
114
Startup time
< 15 seconds
Stop time
< 6 seconds
Chapter 6 Specifications
DVD/CD-RW Combo Drive specifications
Applicable disc
Center hole diameter
Read:
Write:
CD-DA, CD+(E)G, CD-MIDI, CD-TEXT,
CD-ROM, CD-ROM XA, MIXED MODE
CD, CD-I, CD-I Bridge (Photo-CD, Video
CD), Multisession CD (Photo-CD, CDEXTRA, Portfolio, CD-R, CD-RW), CD-R,
CD-RW, DVD-ROM (DVD-5, DVD-9,
DVD-10, DVD-18), DVD-R, DVD-RW,
DVD+R, DVD+RW, DVD-RAM
CD-R and CD-RW
1.5 cm (0.59 in)
Disc diameter
Standard disc
12 cm (4.72 in)
Mini disc
8 cm (3.15 in)
Disc thickness
1.2 mm (0.047 in)
Track pitch
0.74 µm
Access time
CD
DVD
Random
< 110 ms
< 130 ms
Full stroke
< 210 ms
< 225 ms
Audio output level
Line-out, 0.7 Vrms
Cache buffer
2 MB
Data transfer rate
24X CD-ROM
3,600 KB/sec
8X DVD
3,600 KB/sec
24X CD-R
3,600 KB/sec
24X CD-RW
3,600 KB/sec
Transfer mode
Multiword DMA mode 2
Startup time
< 15 seconds
Stop time
< 6 seconds
DVD/CD-RW Combo Drive specifications
115
DVD-ROM drive
Applicable disc
DVD-ROM (DVD-5, DVD-9, DVD-10, DVD-18, CD-ROM (Mode 1 and 2), CD
Digital Audio, CD-XA ready (Mode 2, Form 1 and Form 2), CD-I (Mode 2, Form 1
and Form 2), CD-R, CD-RW, Photo CD (single and multisession), CD-Bridge
Center hole diameter
1.5 cm (0.59 in)
Disc diameter
Standard disc
12 cm (4.72 in)
Mini disc
8 cm (3.15 in)
Disc thickness
1.2 mm (0.047 in)
Track pitch
0.74 µm
Access time
CD
DVD
Random
< 100 ms
< 125 ms
Full stroke
< 175 ms
< 225 ms
Audio output level
Line-out, 0.7 Vrms
Cache buffer
512 KB
Data transfer rate
116
CD-R (24X)
3600 KB/s (150 KB/s at 1X CD rate)
CD-RW (10X)
1500 KB/s (150 KB/s at 1X CD rate)
CD-ROM (24X)
3600 KB/s (150 KB/s at 1X CD rate)
DVD (8X)
10,800 KB/s (1,352 KB/s at 1X DVD rate)
Multiword DMA mode 2
16.6 MB/s
Startup time
< 10 seconds
Stop time
< 3 seconds
Chapter 6 Specifications
System DMA specifications
Hardware DMA
System function
DMA0
Not applicable
DMA1*
Not applicable
DMA2*
Not applicable
DMA3
Not applicable
DMA4
Direct memory access controller
DMA5*
Available for PC Card
DMA6
Not assigned
DMA7
Not assigned
*PC Card controller can use DMA 1, 2, or 5.
System DMA specifications
117
System interrupt specifications
Hardware IRQ
System function
IRQ0
System timer
IRQ1
Standard 101-/102-Key or Microsoft® Natural Keyboard
IRQ2
Cascaded
IRQ3
Intel 82801DB/DBM USB2 Enhanced Host Controller—24CD
IRQ4
COM1
IRQ5*
Conexant AC—Link Audio Intel 82801DB/DBM SMBus Controller—24C3 Data
Fax Modem with SmartCP
IRQ6
Diskette drive
IRQ7*
Parallel port
IRQ8
System CMOS/real-time clock
IRQ9*
Microsoft ACPI-compliant system
IRQ10*
Intel USB UHCI controller—24C2
Intel 82852/82855 GM/GME Graphic Controller
Realtek RTL8139 Family PCI Fast Ethernet Controller
IRQ11
Intel USB EHCI controller—24CD
Intel USB UHCI controller—24C4
Intel USB UHCI controller—24C7
Intel Pro/Wireless 2200BG
TI OHCI 1394 host controller
TI PCI1410 CardBus controller
IRQ12
Synaptics PS/2 TouchPad
IRQ13
Numeric data processor
IRQ14
Primary IDE channel
IRQ15
Secondary IDE channel
*Default configuration; audio possible configurations are IRQ5, IRQ7, IRQ9, IRQ10, or none.
NOTE: PC Cards may assert IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10, IRQ11, or IRQ15. Either the infrared or the serial port
may assert IRQ3 or IRQ4.
118
Chapter 6 Specifications
System I/O address specifications
I/O address (hex)
System function (shipping configuration)
000 - 00F
DMA controller no. 1
010 - 01F
Unused
020 - 021
Interrupt controller no. 1
022 - 024
Opti chipset configuration registers
025 - 03F
Unused
02E - 02F
87334 “Super I/O” configuration for CPU
040 - 05F
Counter/timer registers
044 - 05F
Unused
060
Keyboard controller
061
Port B
062 - 063
Unused
064
Keyboard controller
065 - 06F
Unused
070 - 071
NMI enable/RTC
072 - 07F
Unused
080 - 08F
DMA page registers
090 - 091
Unused
092
Port A
093 - 09F
Unused
0A0 - 0A1
Interrupt controller no. 2
I/O Address (hex)
System Function (shipping configuration)
0A2 - 0BF
Unused
0C0 - 0DF
DMA controller no. 2
0E0 - 0EF
Unused
0F0 - 0F1
Coprocessor busy clear/reset
0F2 - 0FF
Unused
100 - 16F
Unused
170 - 177
Secondary fixed disk controller
178 - 1EF
Unused
1F0 - 1F7
Primary fixed disk controller
System I/O address specifications
119
120
I/O address (hex)
System function (shipping configuration)
1F8 - 200
Unused
201
JoyStick (decoded in ESS1688)
202 - 21F
Unused
220 - 22F
Entertainment audio
230 - 26D
Unused
26E - 26
Unused
278 - 27F
Unused
280 - 2AB
Unused
2A0 - 2A7
Unused
2A8 - 2E7
Unused
2E8 - 2EF
Reserved serial port
2F0 - 2F7
Unused
2F8 - 2FF
Infrared port
300 - 31F
Unused
320 - 36F
Unused
370 - 377
Secondary diskette drive controller
378 - 37F
Parallel port (LPT1/default)
380 - 387
Unused
388 - 38B
FM synthesizer—OPL3
38C - 3AF
Unused
3B0 - 3BB
VGA
3BC - 3BF
Reserved (parallel port/no EPP support)
3C0 - 3DF
VGA
3E0 - 3E1
PC Card controller in CPU
3E2 - 3E3
Unused
3E8 - 3EF
Internal modem
3F0 - 3F7
“A” diskette controller
3F8 - 3FF
Serial port (COM1/default)
CF8 - CFB
PCI configuration index register (PCIDIVO-1)
CFC - CFF
PCI configuration data register (PCIDIVO-1)
Chapter 6 Specifications
System memory map specifications
Size
Memory address
System function
640 KB
00000000-0009FFFF
Base memory
128 KB
000A0000-000BFFFF
Video memory
48 KB
000C0000-000CBFFF
Video BIOS
160 KB
000C8000-000E7FFF
Unused
64 KB
000E8000-000FFFFF
System BIOS
15 MB
00100000-00FFFFFF
Extended memory
58 MB
04800000-07FFFFFF
Super extended memory
58 MB
04800000-07FFFFFF
Unused
2 MB
08000000-080FFFFF
Video memory (direct access)
4 GB
08200000-FFFEFFFF
Unused
64 KB
FFFF0000-FFFFFFFF
System BIOS
System memory map specifications
121
7
Screw listing
This section provides specification and reference information for the screws and screw locks used in the
computer. All screws and screw locks listed in this section are available in the Screw Kit, spare part
number 443906-001.
Torx T8M2.5×7.0 screw
Color
Quantity
Length
Thread
Head diameter
Black
2
7.0 mm
2.5 mm
5.0 mm
Where used: 2 screws that secure the bottom edge of the display bezel to the display assembly
122
Chapter 7 Screw listing
Phillips PM2.0×5.0 captive screw
Color
Quantity
Length
Thread
Head diameter
Black
4
5.0 mm
2.0mm
5.0 mm
Where used:
(1) Two screws that secure the hard drive cover to the computer (screws are captured on the cover by
C-clips)
(2) One screw that secures the Bluetooth module cover to the computer (screw is captured on the cover
by a C-clip)
(3) One screw that secures the memory/WLAN module compartment cover to the computer (screw is
captured on the cover by a C-clip)
Phillips PM2.0×5.0 captive screw
123
Phillips PM2.5×13.0 captive screw
Color
Quantity
Length
Thread
Head diameter
Black
1
13.0 mm
2.5 mm
6.0 mm
Where used: One screw that secures the hard drive to the computer
124
Chapter 7 Screw listing
Phillips PM3.0×3.0 screw
Color
Quantity
Length
Thread
Head diameter
Silver
4
3.0 mm
3.0 mm
5.0 mm
Where used: 4 screws that secure the hard drive bracket to the hard drive
Phillips PM3.0×3.0 screw
125
Phillips PM2.5×3.0 screw
Color
Quantity
Length
Thread
Head diameter
Black
6
3.0 mm
2.5 mm
5.0 mm
Where used: 2 screws that secure the WLAN module to the computer
Where used: 2 screws that secure the WWAN module to the computer
126
Chapter 7 Screw listing
Where used: 2 screws that secure the modem module to the PC Card/audio board assembly
Phillips PM2.5×3.0 screw
127
Torx T8M2.5×9.0 screw
Color
Quantity
Length
Thread
Head diameter
Black
23
9.0 mm
2.5 mm
5.0 mm
Where used:
(1) One screw that secures the optical drive to the computer
(2) Four screws that secure the display assembly to the computer
Where used: 2 screws that secure the display assembly to the computer
128
Chapter 7 Screw listing
Where used: 13 screws that secure the top cover to the computer
Where used: 3 screws that secure the top cover to the computer
Torx T8M2.5×9.0 screw
129
Phillips PM2.0×3.0 screw
Color
Quantity
Length
Thread
Head diameter
Black
10
3.0 mm
2.0 mm
4.5 mm
Where used: 2 screws that secure the optical drive bracket to the optical drive
Where used: 8 screws that secure the display hinges to the display panel
130
Chapter 7 Screw listing
Black Phillips PM2.5×8.0 captive screw
Color
Quantity
Length
Thread
Head diameter
Black
3
8.0 mm
2.5 mm
5.0 mm
Where used: 3 screws that secure the keyboard to the computer
Black Phillips PM2.5×8.0 captive screw
131
Silver Phillips PM2.5×8.0 captive screw
Color
Quantity
Length
Thread
Head diameter
Silver
1
8.0 mm
2.5 mm
5.0 mm
Where used: One captive screw that secures the fan to the computer
132
Chapter 7 Screw listing
Phillips PM2.5×8.0 screw
Color
Quantity
Length
Thread
Head diameter
Black
1
8.0 mm
2.5 mm
5.0 mm
Where used: One screw that secures the fan to the system board
Phillips PM2.5×8.0 screw
133
Phillips PM2.0×6.0 screw
Color
Quantity
Length
Thread
Heat width
Silver
4
6.0 mm
2.0 mm
4.5 mm
Where used: 4 screws that secure the heat sink to the computer
134
Chapter 7 Screw listing
Torx T8M2.5×6.0 screw
Color
Quantity
Length
Thread
Head diameter
Black
8
6.0 mm
2.5 mm
5.0 mm
Where used: 4 screws that secure the top edge of the display bezel to the display enclosure
Where used: 4 screws that secure the top edge of the display panel to the display enclosure
Torx T8M2.5×6.0 screw
135
Hex HM5.0×9.0 screw lock
Color
Quantity
Length
Thread
Head diameter
Silver
2
9.0 mm
3.0 mm
5.0 mm
Where used: 2 screw locks that secure the top cover to the computer
136
Chapter 7 Screw listing
Phillips PM2.5×5.0 screw
Color
Quantity
Length
Thread
Head diameter
Black
12
5.0 mm
2.5 mm
5.0 mm
Where used:
(1) Two screws that secure the speaker assembly to the base enclosure
(2) Three screws that secure the USB/Media Card Reader board to the base enclosure
Phillips PM2.5×5.0 screw
137
Where used:
(1) Two screws that secure the system board and PC Card/audio board assembly to the base
enclosure
(2) One screw that secures the system board to the base enclosure
(3) Two screws that secure the optical drive connector board to the system board
(4) One screw that secures the SIM slot board to the base enclosure
(5) One screw that secures the PC Card/audio board assembly to the system board
138
Chapter 7 Screw listing
Phillips PM2.5×3.0 broad-head screw
Color
Quantity
Length
Thread
Head diameter
Silver
2
3.0 mm
2.5 mm
7.0 mm
Where used: 2 screws that secure the system board to the base enclosure
Phillips PM2.5×3.0 broad-head screw
139
8
Backup and recovery
Backup and recovery in Windows Vista
Creating recovery discs
After setting up the computer for the first time, be sure to create a set of recovery discs of the full factory
image. The recovery discs are used to start up (boot) the computer and recover the operating system
and software to factory settings in case of system instability or failure.
Note the following guidelines before creating recovery discs:
●
You will need high-quality CD-R, DVD-R, or DVD+R media (purchased separately).
NOTE: Read-write discs, such as CD-RW and DVD±RW discs, are not compatible with HP
Backup & Recovery Manager.
●
The computer must be connected to AC power during the process.
●
Only one set of the recovery discs can be created per computer.
●
Number each disc before inserting it into the optical drive of the computer.
●
If necessary, you can cancel the disc creation before you have finished creating the recovery
discs. The next time you select Create a set of recovery discs (Recommended), you will be
prompted to continue the disc creation.
To create a set of recovery discs:
1.
Select Start > All Programs > HP Backup & Recovery > Backup & Recovery
Manager.
2.
Click Next.
3.
Click Create a set of recovery discs (Recommended), and then click Next.
4.
Follow the on-screen instructions.
Backing up your information
NOTE: You can only recover files that you have previously backed up. HP recommends that you use
HP Backup & Recovery Manager to create an entire drive backup as soon as you set up your computer.
140
Chapter 8 Backup and recovery
With HP Backup & Recovery Manager, you can perform the following tasks:
●
Backing up your information regularly to protect your important system files
●
Creating system recovery points that allow you to reverse undesireable changes to your computer
by restoring the computer to an earlier state
●
Scheduling backups at specific intervals or events
When to back up
●
On a regularly scheduled basis
NOTE: Set reminders to back up your information periodically.
●
Before the computer is repaired or restored
●
Before you add or modify hardware or software
Backup suggestions
●
Create a set of recovery discs using HP Backup & Recovery Manager.
●
Create system recovery points using HP Backup & Recovery Manager, and periodically copy them
to disc.
●
Store personal files in the Documents folder and back up these folders periodically.
●
Back up templates stored in their associated programs.
●
Save customized settings in a window, toolbar, or menu bar by taking a screen shot of your
settings.
The screen shot can be a time saver if you have to reset your preferences.
To copy the screen and paste it into a word-processing document:
a.
Display the screen.
b.
Copy the screen.
To copy only the active window, press alt+fn+prt sc.
To copy the entire screen, press fn+prt sc.
c.
Open a word-processing document, and then select Edit > Paste.
NOTE: Before you can perform backup and recovery procedures, the computer must be connected to
external power.
NOTE: Drivers, utilities, and applications installed by HP can be copied to a CD or to a DVD using
HP Backup & Recovery Manager.
Backup and recovery in Windows Vista
141
Backing up specific files or folders
You can back up specific files or folders to the recovery partition on the hard drive, to an optional
external hard drive, or to optical discs (CDs or DVDs).
NOTE: This process will take several minutes, depending on the file size and the speed of the
computer.
To back up specific files or folders:
1.
Select Start > All Programs > HP Backup & Recovery > Backup & Recovery
Manager.
2.
Click Next.
3.
Click Create or manage backups, and then click Next.
4.
Click Back up user created files and folders, and then click Next.
5.
Follow the on-screen instructions.
Backing up the entire hard drive
When you perform a complete backup of the hard drive, you are saving the full factory image,
including the Windows® operating system, software applications, and all personal files and folders.
NOTE: A copy of the entire hard drive image can be stored on another hard drive, on a network
drive, or on recovery discs that you create.
NOTE: This process may take over an hour, depending on your computer speed and the amount of
data being stored.
To back up your entire hard drive:
142
1.
Select Start > All Programs > HP Backup & Recovery > Backup & Recovery
Manager.
2.
Click Next.
3.
Click Create or manage backups, and then click Next.
4.
Click Create or manage Entire Drive Backups, and then click Next.
5.
Follow the on-screen instructions.
Chapter 8 Backup and recovery
Creating recovery points
When you back up modifications since your last backup, you are creating system recovery points. This
allows you to save a snapshot of your hard drive at a specific point in time. You can then recover back
to that point if you want to reverse subsequent changes made to your system.
NOTE: The first system recovery point, a snapshot of the entire image, is automatically created the
first time you perform a backup. Subsequent recovery points make copies of changes made after that
time.
HP recommends that you create recovery points at the following times:
●
Before you add or extensively modify software or hardware
●
Periodically, whenever the system is performing optimally
NOTE: Recovering to an earlier recovery point does not affect data files or e-mails created since that
recovery point.
To create a system recovery point:
1.
Select Start > All Programs > HP Backup & Recovery > Backup & Recovery
Manager.
2.
Click Next.
3.
Click Create or manage backups, and then click Next.
4.
Click Create or manage Recovery Points, and then click Next.
5.
Follow the on-screen instructions.
Scheduling backups
Use HP Backup Scheduler to schedule backups for the entire system, for recovery points, or for specific
files and folders. With this tool, you can schedule backups at specific intervals (daily, weekly, or
monthly) or at specific events, such as at system restart or when you dock to an optional docking station
(select models only).
To schedule backups:
1.
Select Start > All Programs > HP Backup & Recovery > HP Backup Scheduler.
2.
Follow the on-screen instructions.
Performing a recovery
NOTE: You can only recover files that you have previously backed up. HP recommends that you use
HP Backup & Recovery Manager to create an entire drive backup as soon as you set up your computer.
Backup and recovery in Windows Vista
143
HP Backup & Recovery Manager helps you with the following tasks for safeguarding your information
and restoring it in case of a system failure:
●
Recovering important files—This feature helps you reinstall important files without performing a full
system recovery.
●
Performing a full system recovery—With HP Backup & Recovery Manager, you can recover your
full factory image if you experience system failure or instability. HP Backup & Recovery Manager
works from a dedicated recovery partition on the hard drive or from recovery discs you create.
Performing a recovery from the recovery discs
To perform a recovery from the recovery discs, follow these steps:
1.
Back up all personal files.
2.
Insert the first recovery disc into the optical drive and restart the computer.
3.
Follow the on-screen instructions.
Performing a recovery from the hard drive
There are 2 ways to initiate a recovery from the hard drive:
144
●
From within Windows
●
From the recovery partition
Chapter 8 Backup and recovery
Initiating a recovery in Windows
To initiate a recovery in Windows, follow these steps:
1.
Back up all personal files.
2.
Select Start > All Programs > HP Backup & Recovery > Backup & Recovery
Manager.
3.
Click Next.
4.
Click Perform a recovery, and then click Next.
5.
Follow the on-screen instructions.
Initiating a recovery from the hard drive recovery partition
To initiate a recovery from the hard drive recovery partition, follow these steps:
1.
Back up all personal files.
2.
Restart the computer, and then press f11 before the Windows operating system loads.
3.
Click a recovery option, and then click Next.
4.
Follow the on-screen instructions.
Backup and recovery in Windows Vista
145
Backup and recovery in Windows XP
Creating recovery discs
After setting up the computer for the first time, be sure to create a set of recovery discs of the full factory
image. The recovery discs are used to start up (boot) the computer and recover the operating system
and software to factory settings in case of system instability or failure.
Note the following guidelines before creating recovery discs:
●
You will need high-quality CD-R, DVD-R, or DVD+R media (purchased separately).
NOTE: Read-write discs, such as CD-RW and DVD±RW discs, are not compatible with HP
Backup & Recovery Manager.
●
The computer must be connected to AC power during the process.
●
Only one set of the recovery discs can be created per computer.
●
Number each disc before inserting it into the optical drive of the computer.
●
If necessary, you can cancel the disc creation before you have finished creating the recovery
discs. The next time you select Create factory software recovery CDs or DVDs to
recover the system (Highly recommended), you will be prompted to continue the disc
creation.
To create a set of recovery discs:
1.
Select Start > All Programs > HP Backup and Recovery > HP Backup and Recovery
Manager.
2.
Click Next.
3.
Click Create factory software recovery CDs or DVDs to recover the system (Highly
recommended), and then click Next.
4.
Follow the on-screen instructions.
Backing up your information
NOTE: You can only recover files that you have previously backed up. HP recommends that you use
HP Backup and Recovery Manager to create an entire drive backup as soon as you set up your
computer.
With HP Backup and Recovery Manager, you can perform the following tasks:
146
●
Backing up your information regularly to protect your important system files
●
Creating system recovery points that allow you to reverse undesireable changes to your computer
by restoring the computer to an earlier state
●
Scheduling backups at specific intervals or events
Chapter 8 Backup and recovery
When to back up
●
On a regularly scheduled basis
NOTE: Set reminders to back up your information periodically.
●
Before the computer is repaired or restored
●
Before you add or modify hardware or software
Backup suggestions
●
Create a set of recovery discs using HP Backup and Recovery Manager.
●
Create system recovery points using HP Backup and Recovery Manager, and periodically copy
them to disc.
●
Store personal files in the My Documents folder and back up these folders periodically.
●
Back up templates stored in their associated programs.
●
Save customized settings in a window, toolbar, or menu bar by taking a screen shot of your
settings.
The screen shot can be a time saver if you have to reset your preferences.
To copy the screen and paste it into a word-processing document:
a.
Display the screen.
b.
Copy the screen.
To copy only the active window, press alt+fn+prt sc.
To copy the entire screen, press fn+prt sc.
c.
Open a word-processing document, and then select Edit > Paste.
NOTE: Before you can perform Backup and Recovery procedures, the computer must be connected to
external power.
NOTE: Drivers, utilities, and applications installed by HP can be copied to a CD or to a DVD using
HP Backup and Recovery Manager.
Backing up specific files or folders
You can back up specific files or folders to the recovery partition on the hard drive, to an optional
external hard drive, or to optical discs (CDs or DVDs).
NOTE: This process will take several minutes, depending on the file size and the speed of the
computer.
Backup and recovery in Windows XP
147
To back up specific files or folders:
1.
Select Start > All Programs > HP Backup and Recovery > HP Backup and Recovery
Manager.
2.
Click Next.
3.
Click Back up to protect system settings and important data files, and then click
Next.
4.
Click Back up individual files and folders, and then click Next.
5.
Follow the on-screen instructions.
Backing up the entire hard drive
When you perform a complete backup of the hard drive, you are saving the full factory image,
including the Windows® operating system, software applications, and all personal files and folders.
NOTE: A copy of the entire hard drive image can be stored on another hard drive, on a network
drive, or on recovery discs that you create.
NOTE: This process may take over an hour, depending on your computer speed and the amount of
data being stored.
To back up your entire hard drive:
148
1.
Select Start > All Programs > HP Backup and Recovery > HP Backup and Recovery
Manager.
2.
Click Next.
3.
Click Back up to protect system settings and important data files, and then click
Next.
4.
Click Back up entire hard drive, and then click Next.
5.
Follow the on-screen instructions.
Chapter 8 Backup and recovery
Creating recovery points
When you back up modifications since your last backup, you are creating system recovery points. This
allows you to save a snapshot of your hard drive at a specific point in time. You can then recover back
to that point if you want to reverse subsequent changes made to your system.
NOTE: The first system recovery point, a snapshot of the entire image, is automatically created the
first time you perform a backup. Subsequent recovery points make copies of changes made after that
time.
HP recommends that you create recovery points at the following times:
●
Before you add or extensively modify software or hardware
●
Periodically, whenever the system is performing optimally
NOTE: Recovering to an earlier recovery point does not affect data files or e-mails created since that
recovery point.
To create a system recovery point:
1.
Select Start > All Programs > HP Backup and Recovery > HP Backup and Recovery
Manager.
2.
Click Next.
3.
Click Back up to protect system settings and important data files, and then click
Next.
4.
Click Create or manage Recovery Points, and then click Next.
5.
Follow the on-screen instructions.
Scheduling backups
Use HP Backup Scheduler to schedule backups for the entire system, for recovery points, or for specific
files and folders. With this tool, you can schedule backups at specific intervals (daily, weekly, or
monthly) or at specific events, such as at system restart or when you dock to an optional docking station
(select models only).
To schedule backups:
1.
Select Start > All Programs > HP Backup and Recovery > HP Backup Scheduler.
2.
Follow the on-screen instructions.
Performing a recovery
NOTE: You can only recover files that you have previously backed up. HP recommends that you use
HP Backup and Recovery Manager to create an entire drive backup as soon as you set up your
computer.
Backup and recovery in Windows XP
149
HP Backup and Recovery Manager helps you with the following tasks for safeguarding your
information and restoring it in case of a system failure:
●
Recovering important files—This feature helps you reinstall important files without performing a full
system recovery.
●
Performing a full system recovery—With HP Backup and Recovery Manager, you can recover your
full factory image if you experience system failure or instability. HP Backup and Recovery
Manager works from a dedicated recovery partition on the hard drive or from recovery discs you
create.
Performing a recovery from the recovery discs
To perform a recovery from the recovery discs, follow these steps:
1.
Back up all personal files.
2.
Insert the first recovery disc into the optical drive and restart the computer.
3.
Follow the on-screen instructions.
Performing a recovery from the hard drive
There are 2 ways to initiate a recovery from the hard drive:
150
●
From within Windows
●
From the recovery partition
Chapter 8 Backup and recovery
Initiating a recovery in Windows
To initiate a recovery in Windows, follow these steps:
1.
Back up all personal files.
2.
Select Start > All Programs > HP Backup and Recovery > HP Backup and Recovery
Manager.
3.
Click Next.
4.
Click Recover important files or the entire system, and then click Next.
5.
Follow the on-screen instructions.
Initiating a recovery from the hard drive recovery partition
To initiate a recovery from the hard drive recovery partition, follow these steps:
1.
Back up all personal files.
2.
Restart the computer, and then press f11 before the Windows operating system loads.
3.
Click a recovery option, and then click Next.
4.
Follow the on-screen instructions.
Backup and recovery in Windows XP
151
9
Connector pin assignments
Audio-out (headphone)
Pin
Signal
1
Audio out, left channel
2
Audio out, right channel
3
Ground
Audio-in (microphone)
152
Pin
Signal
1
Audio signal in
2
Audio signal in
3
Ground
Chapter 9 Connector pin assignments
External monitor
Pin
Signal
1
Red analog
2
Green analog
3
Blue analog
4
Not connected
5
Ground
6
Ground analog
7
Ground analog
8
Ground analog
9
+5 VDC
10
Ground
11
Monitor detect
12
DDC 2B data
13
Horizontal sync
14
Vertical sync
15
DDC 2B clock
External monitor
153
RJ-11 (modem)
Pin
Signal
1
Unused
2
Tip
3
Ring
4
Unused
5
Unused
6
Unused
RJ-45 (network)
154
Pin
Signal
1
Transmit +
2
Transmit -
3
Receive +
4
Unused
5
Unused
6
Receive -
7
Unused
8
Unused
Chapter 9 Connector pin assignments
S-Video-out
Pin
Signal
1
S-VHS color (C) signal
2
Composite video signal
3
S-VHS intensity (Y) signal
4
S-VHS color ground
5
TV-CD
6
S-VHS intensity ground
7
Composite video ground
Universal Serial Bus
Pin
Signal
1
+5 VDC
2
Data -
3
Data +
4
Ground
S-Video-out
155
10 Power cord set requirements
The wide range input feature of the computer permits it to operate from any line voltage from 100 to
120 volts AC or from 220 to 240 volts AC.
The 3-conductor power cord set included with the computer meets the requirements for use in the
country or region where the equipment is purchased.
Power cord sets for use in other countries or regions must meet the requirements of the country or region
where the computer is used.
Requirements for all countries and regions
The requirements listed below are applicable to all countries and regions:
156
●
The length of the power cord set must be at least 1.5 m (5.0 ft) and no more than 2.0 m (6.5 ft).
●
All power cord sets must be approved by an acceptable accredited agency responsible for
evaluation in the country and region where the power cord set will be used.
●
The power cord sets must have a minimum current capacity of 10 amps and a nominal voltage
rating of 125 or 250 V AC, as required by each country and region's power system.
●
The appliance coupler must meet the mechanical configuration of an EN 60 320/IEC 320
Standard Sheet C13 connector for mating with the appliance inlet on the back of the computer.
Chapter 10 Power cord set requirements
Requirements for specific countries and regions
Country or region
Accredited agency
Applicable note number
Australia
EANSW
1
Austria
OVE
1
Belgium
CEBC
1
Canada
CSA
2
Denmark
DEMKO
1
Finland
FIMKO
1
France
UTE
1
Germany
VDE
1
Italy
IMQ
1
Japan
METI
3
Korea
EK
4
The Netherlands
KEMA
1
Norway
NEMKO
1
The People's Republic of China
CCC
5
Sweden
SEMKO
1
Switzerland
SEV
1
Taiwan
BSMI
4
The United Kingdom
BSI
1
The United States
UL
2
1.
The flexible cord must be Type HO5VV-F, 3-conductor, 1.0-mm² conductor size. Power cord set fittings (appliance coupler
and wall plug) must bear the certification mark of the agency responsible for evaluation in the country and region where it
will be used.
2.
The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG, 3-conductor. The wall plug must be a two-pole
grounding type with a NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3.
The appliance coupler, flexible cord, and wall plug must bear a “T” mark and registration number in accordance with the
Japanese Dentori Law. The flexible cord must be Type VCT or VCTF, 3-conductor, 1.00-mm² conductor size. The wall plug
must be a two-pole grounding type with a Japanese Industrial Standard C8303 (7 A, 125 V) configuration.
4.
The flexible cord must be Type RVV, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler
and wall plug) must bear the certification mark of the agency responsible for evaluation in the country and region where it
will be used.
5.
The flexible cord must be Type VCTF, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler
and wall plug) must bear the certification mark of the agency responsible for evaluation in the country and region where it
will be used.
Requirements for specific countries and regions
157
11 Recycling
Battery
When a battery has reached the end of its useful life, do not dispose of the battery in general
household waste. Follow the local laws and regulations in your area for computer battery disposal.
Display
WARNING! The backlight contains mercury. Exercise caution when removing and handling the
backlight to avoid damaging this component and causing exposure to the mercury.
CAUTION: The procedures in this appendix can result in damage to display components. The only
components intended for recycling purposes are the liquid crystal display (LCD) panel and the
backlight. Careful handling must be exercised when removing these components. When you remove
these components, handle them carefully.
NOTE: Materials Disposal. This HP product contains mercury in the backlight in the display
assembly that might require special handling at end-of-life. Disposal of mercury may be regulated
because of environmental considerations. For disposal or recycling information, contact your local
authorities, or see the Electronic Industries Alliance (EIA) Web site at http://www.eiae.org.
This section provides disassembly instructions for the display assembly. The display assembly must be
disassembled to gain access to the backlight (1) and the liquid crystal display (LCD) panel (2).
NOTE: The procedures provided in this appendix are general disassembly instructions. Specific
details, such as screw sizes, quantities, and locations, and component shapes and sizes, can vary from
one computer model to another.
158
Chapter 11 Recycling
Perform the following steps to disassemble the display assembly:
1.
Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly.
2.
Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of
the display bezel until the bezel disengages from the display assembly.
3.
Remove the display bezel (3).
Display
159
160
4.
Disconnect all display panel cables (1) from the display inverter and remove the inverter (2).
5.
Remove all screws (1) that secure the display panel assembly to the display enclosure.
6.
Remove the display panel assembly (2) from the display enclosure.
7.
Turn the display panel assembly upside down.
8.
Remove all screws that secure the display panel frame to the display panel.
9.
Use a sharp-edged tool to cut the tape (1) that secures the sides of the display panel to the display
panel frame.
Chapter 11 Recycling
10. Remove the display panel frame (2) from the display panel.
11. Remove the screws (1) that secure the backlight cover to the display panel.
12. Lift the top edge of the backlight cover (2) and swing it outward.
13. Remove the backlight cover.
14. Turn the display panel right-side up.
Display
161
15. Remove the backlight cables (1) from the clip (2) in the display panel.
16. Turn the display panel upside down.
WARNING! The backlight contains mercury. Exercise caution when removing and handling the
backlight to avoid damaging this component and causing exposure to the mercury.
17. Remove the backlight frame from the display panel.
162
Chapter 11 Recycling
18. Remove the backlight from the backlight frame.
19. Disconnect the display cable (1) from the LCD panel.
20. Remove the screws (2) that secure the LCD panel to the display rear panel.
21. Release the LCD panel (3) from the display rear panel.
22. Release the tape (4) that secures the LCD panel to the display rear panel.
23. Remove the LCD panel.
24. Recycle the LCD panel and backlight.
Display
163
Index
Symbols/Numerics
1394 port 19
A
AC adapter, spare part numbers
36, 37
accessory battery connector 22
antennae, disconnecting 65, 73
applications key, Windows 15
audio, product description 3, 9
audio-in jack
location 19
pin assignments 152
audio-out jack
location 19
pin assignments 152
B
backing up 140, 146
backup
files and folders 142, 147
hard drive 142, 148
modifications made to the
system 143, 149
scheduling 143, 149
base enclosure, spare part
numbers 29, 40
battery
location 22
removal 52
spare part numbers 29, 42,
52
specifications 112
battery bay 22
battery light 17, 18
battery release latch 22
164
Index
Bluetooth module
removal 58
spare part numbers 32, 37,
44, 58
Bluetooth module cable
illustrated 34
removal 88
Bluetooth module compartment 22
Bluetooth module cover
illustrated 33
removal 59
boot options 105
boot order 105
bottom components 22
buttons
info 14
PC Card eject 19
power 14
presentation 14
volume mute 14
wireless 14
C
Cable Kit
contents 34
spare part number 27, 34, 42
cables, service considerations 46
caps lock light 16
chipset, product description 1, 7
CMOS clearing 50
components
bottom 22
buttons 13
fingerprint reader 13
front 18
keys 15
left-side 19
lights 16
pointing device 17
rear 20
right-side 21
switches 13
top 13
TouchPad 17
computer feet
illustrated 33
locations 58
Computer Setup
accessing 101
Diagnostics menu 104
File menu 103
navigating and selecting 102
restoring factory settings 102
Security menu 104
System Configuration menu
105
using 102
computer specifications 108
connectors
accessory battery 22
docking 22
service considerations 46
creating recovery points 143,
149
D
Diagnostics menu 104
Disk Sanitizer 104
diskette drive
precautions 46
product description 3, 9
display assembly
removal 80
spare part numbers 25, 41,
80
display bezel
release 54
removal 83
spare part number 25, 43
display component recycling 158
display enclosure, spare part
numbers 25, 43, 44
display hinge
removal 83
spare part number 25, 43, 84
display inverter
removal 54
spare part number 25, 43, 54
display panel
removal 83
spare part numbers 43
display release latch 18
display specifications 109, 110
display switch 14
docking connector 22
docking support, product
description 5, 11
drive light 17, 18
DriveLock password 104
drives, boot order 105
drives, preventing damage 46
DVD-ROM drive
location 21
precautions 46
removal 66
spare part number 33, 35,
42, 66
specifications 116
DVD/CD-RW Combo Drive
location 21
precautions 46
removal 66
spare part number 33, 35,
42, 66
specifications 115
DVD±RW and CD-RW Super Multi
Double-Layer Combo Drive
location 21
precautions 46
removal 66
spare part numbers 32, 35,
42, 66
specifications 113
E
electrostatic discharge 47
Ethernet, product description 3, 9
Execution Disable 106
external media cards, product
description 4, 10
external monitor port
location 20
pin assignments 153
F
fan
removal 75
spare part number 27, 43, 75
feet
illustrated 33
locations 58
File menu 103
fingerprint reader 14
front components 18
function keys 15
G
graphics, product description 1, 7
grounding equipment and
methods 49
H
hard drive
location 22
precautions 46
product description 3, 8
removal 56
spare part numbers 29, 35,
43, 56
specifications 111
hard drive backup 142, 148
hard drive bay 22
hard drive bracket, removal 57
hard drive cover
illustrated 33
removal 56
hard drive recovery 144, 150
hard drive test 104
headphone jack
location 19
pin assignments 152
heat sink
removal 76
spare part numbers 27, 42,
44, 76
hinge
removal 83
spare part number 25, 43, 84
I
I/O address specifications 119
info button 14
interrupt specifications 118
inverter
removal 54
spare part number 25, 43, 54
J
jacks
audio-in 19
audio-out 19
headphone 19
microphone 19
modem 21
network 20
RJ-11 21
RJ-45 20
S-Video-out 20
K
keyboard
product description 5, 11
removal 68
spare part numbers 26, 40,
68
keypad keys 15
keys
esc 15
fn 15
function 15
Windows applications 15
Windows logo 15
L
LAN Power Save 106
language, changing in Computer
Setup 105
left-side components 19
legacy support, USB 101, 106
lights
battery 17, 18
caps lock 16
drive 17, 18
num lock 16
power 16, 18
volume down 16
volume mute 16
volume up 16
wireless 16, 18
Index
165
M
mass storage devices, spare part
numbers 35
Media Card Reader 21
memory check 104
memory map specifications 121
memory module
product description 2, 8
removal 60, 70
spare part numbers 27, 37,
60, 70
memory/WLAN module
compartment 22
memory/WLAN module
compartment cover
illustrated 33
removal 60
microphone 14
illustrated 34
removal 87
microphone jack
location 19
pin assignments 152
modem jack
location 21
pin assignments 154
modem module
product description 3, 9
removal 97
spare part numbers 29, 38,
44, 97
modem module cable
illustrated 34
removal 88
monitor port
location 20
pin assignments 153
N
navigating in Computer Setup
102
network jack
location 20
pin assignments 154
num lock light 16
O
operating system, product
description 6, 12
166
Index
optical drive
location 21
precautions 46
product description 3, 9
removal 66
spare part numbers 32, 35,
42, 66
specifications 113, 115, 116
optical drive bracket, removal 67
optical drive connector board
removal 95
spare part number 29, 41, 95
P
packing guidelines 48
panels, product description 2, 7
parallel port mode 106
password clearing 50
passwords 104
PC Card eject button 19
PC Card slot 19
PC Card slot bezel
illustrated 33
removal 93
PC Card/audio board assembly
removal 95
spare part numbers 28, 42,
95
pin assignments
audio-in jack 152
audio-out jack 152
external monitor port 153
headphone jack 152
microphone jack 152
modem jack 154
monitor port 153
network jack 154
RJ-11 154
RJ-45 jack 154
S-Video-out jack 155
Universal Serial Bus (USB)
port 155
plastic parts 45
Plastics Kit
contents 33
spare part number 27, 33, 42
pointing device
components 17
product description 11
pointing devices, product
description 5
ports
1394 19
external monitor 20
monitor 20
product description 4, 10
Universal Serial Bus (USB) 19,
21
power button 14
power connector 19
power cord
set requirements 156
spare part numbers 36, 37
power light 16, 18
power requirements, product
description 5, 11
power-on password 104
presentation button 14
processor
product description 1, 7
removal 78
spare part numbers 27, 38,
42, 43, 44, 78
product description
audio 3, 9
chipset 1, 7
diskette drive 3, 9
docking support 5, 11
Ethernet 3, 9
external media cards 4, 10
graphics 1, 7
hard drives 3, 8
keyboard 5, 11
memory module 2, 8
modem module 3, 9
operating system 6, 12
optical drives 3, 9
panels 2, 7
pointing devices 5, 11
ports 4, 10
power requirements 5, 11
processors 1, 7
security 5, 11
serviceability 6, 12
wireless 4, 9
R
rear components 20
recovery discs
creating 140, 146
using 144, 150
recovery partition 145, 151
recovery points 143, 149
removal/replacement
preliminaries 45
procedures 51
restoring Computer Setup factory
settings 102
right-side components 21
RJ-11 jack
location 21
pin assignments 154
RJ-45 jack
location 20
pin assignments 154
RTC battery
removal 71
spare part number 28, 44, 71
S
S-Video-out jack
location 20
pin assignments 155
scheduling backups 143, 149
Screw Kit
contents 122
spare part number 36, 42
screw listing 122
security cable slot 20
Security menu 104
security, product description 5,
11
selecting in the Computer Setup
102
serial number 23, 51
service considerations 45
serviceability, product description
6, 12
SIM slot board
removal 99
spare part number 29, 42, 99
SIM, removal 53
Smart card reader module, spare
part number 36, 42
smart card security 104
speaker assembly
removal 89
spare part number 29, 41, 89
speakers 18
specifications
battery 112
computer 108
display 109, 110
DVD-ROM drive 116
DVD/CD-RW Combo Drive
115
DVD±RW and CD-RW Super
Multi Double-Layer Combo
Drive 113
hard drive 111
I/O addresses 119
interrupts 118
memory map 121
optical drive 113, 115, 116
system DMA 117
startup check 104
static-shielding materials 49
stringent security 104
switch cover
removal 74
spare part numbers 25, 42,
74
system backup 142, 148
system board
removal 92
spare part numbers 28, 42,
43, 92
System Configuration menu 105
system DMA 117
system fan 106
system information 103
system memory map 121
system recovery points 143, 149
T
Thermal Material Kit, spare part
numbers 27, 37, 43, 76
thermal material, replacement 77
tools required 45
top components 13
top cover
removal 85
spare part numbers 28, 41,
85
TouchPad 17
TouchPad button 17
TouchPad components 17
TouchPad scroll zone 17
transporting guidelines
48
U
Universal Serial Bus (USB) port
location 19, 21
pin assignments 155
unknown password 50
USB legacy support 101, 106
USB/Media Card Reader board
removal 90
spare part number 29, 42, 90
V
vents 19, 22
volume down light 16
volume mute button 14
volume mute light 16
volume scroll zone 14
volume up light 16
W
Windows applications key 15
Windows logo key 15
wireless antennae, disconnecting
65, 73
wireless button 14
wireless light 16, 18
wireless, product description 4, 9
WLAN module
removal 62
spare part numbers 29, 37,
38, 62
workstation guidelines 48
WWAN module
removal 72
spare part numbers 27, 37,
44, 72
Index
167