OmniSwitch 6855 Datasheet - Alcatel

ALCATEL-LUCENT
OMNISWITCH 6855
HARDENED LAN SWITCH
Alcatel-Lucent OmniSwitch™ 6855 Hardened LAN Switch (HLS) models are industrial grade,
managed, Gigabit and 10 Gigabit Ethernet switches designed to operate reliably in harsh
electrical environments and severe temperatures.
This superior, rugged hardware design,
coupled with the widely deployed and
field-proven Alcatel-Lucent Operating
System (AOS), makes the OmniSwitch 6855
ideal for industrial and mission-critical
applications that require wider operating
temperature ranges, more stringent EMC/
EMI requirements and an optimized
feature set for high security, reliability,
performance and easy management.
The target applications for these versatile
LAN switches are power utilities, transportation and traffic control systems,
industrial factory floor installations,
video surveillance systems and outdoor
installations, all of which require gigabit
backbone connectivity.
FEATURES
BENEFITS
Ruggedized hardware design
Operates at a wider temperature range from -40°C to +75°C,
withstands greater shock, vibrations, temperature and EMI/EMC tests
Convection cooling for fanless models or temperature triggered
fans for 24 port models
Increased reliability, and lower acoustic levels
Power over Ethernet (PoE) support on all copper models
Enables converged applications by providing power to IP phones,
surveillance cameras, and wireless access points
Redundancy at all levels including power supplies, software
and hot-swappable. Small Form Factor Pluggable (SFP) modules
A field-upgradeable solution that makes the network highly available
and reduces operating expenses
Wire-rate switching and routing at gigabit speeds. Advanced
services incorporated in the operating system (OS): quality of
service (QoS), access control lists (ACLs), L2/L3, VLAN stacking,
and IPv6
Outstanding performance when supporting real-time voice, data, and
video applications for converged scalable networks
Extensive security features for network access control (NAC),
policy enforcement and attack containment
Fully secures the network at the edge, at no additional cost
Hardware-based virtual routing and forwarding (VRF) support on
OmniSwitch 6855-U24X
Enterprise-wide cost reduction through hardware consolidation
to achieve network segmentation and security without additional
hardware installation
Advanced, out-of-the-box auto- configuration, Link Layer
Discovery Protocol (LLDP) network policies and dynamic VLAN
allocation
Automated switch setup and configuration, and end-to-end VLAN
provisioning support cost-effective installation and deployment
Ready for Metro Ethernet access: VLAN stacking, multicast
switching, Dynamic Host Configuration Protocol (DHCP) snooping/
option 82, ITU-T Y.1731, IEEE 802.1ag, IEEE 802.3ah and MACForced Forwarding (MEF 9/14 compliant)
Simplifies Metro Ethernet network OA&M for service providers
FEATURES
BENEFITS
Enhanced Unified Access features for converged campus network
solutions
• SIP Fluency to provision & monitor QOS treatment of SIP flows
• Airgroup™ Network Services for Bonjour speaking devices
• Integrated Policy with User Network Profile
• Citrix VDI fluency enables differentiated services for VDI flows
Unified Access and Application fluent Networks provide resilient
architecture with automated controls, enhanced security and
simplified management for both wired and wireless users resulting in
reduced operational complexity & lesser cost.
User Network Profiles add intelligence to the network to automatically
adapt as users move around the enterprise network.
Integration of services enable employees to access same applications
and service across wired and wireless access and thus gives a
consistent, seamless user experience.
Enables deployment of advanced , secure BYOD services
in enterprise networks*:
• Advanced zero-touch guest management capabilities
• Device on-boarding and automated 802.1x provisioning
• Device posture/health check, and fingerprinting,
• Application management
OS6855 offers flexible deployment options for BYOD services which
does not require a forklift upgrade and protects customer investment.
Automatic on-boarding and 802.1x provisioning of user devices helps
in IT operation simplification and increased wired LAN security.
Provides improved control and security over corporate data/
applications for mixed personal and corporate environment.
* Requires ClearPass
ALCATEL-LUCENT
OMNISWITCH 6855 MODELS
The OmniSwitch 6855 family offers
customers an extensive selection of Gigabit
and 10 Gigabit Ethernet fixed-configuration switches and power supply options
that accommodate most needs. Models
offered include industrial-strength PoE
and non-PoE models in a IU form factor.
OmniSwitch 6855-u24x
OmniSwitch 6855-P14
• Two 10 Gigabit Ethernet SFP+ ports for
stacking or uplinks
• 12 10/100/1000 RJ-45 copper ports
• 22 SFP ports
• Two SFP ports
• Two combo ports
• Fanless design
• 12 PoE-capable ports
• Up to four units in a stack
Fiber models with 10 Gigabit
Ethernet
OmniSwitch 6855-24
OmniSwitch 6855-u10
• Eight SFP ports
• Two RJ-45 10/100/1000 copper ports
• Fanless design
Copper models with PoE
• 20 10/100/1000 RJ-45 copper ports
OmniSwitch 6855-14
• Four PoE-capable ports
• 12 10/100/1000 RJ-45 copper ports
• Four combo ports
• Four PoE-capable ports
• Two SFP ports
•
• Fanless design
Four combo ports
All PoE models support 15.4 W per
port PoE (compliant with IEEE 802.3af
standard).
TECHNICAL SPECIFICATIONS
OS6855-P14
OS6855-14
OS6855-24
OS6855-U10
OS6855-U24X
Maximum 10 Gigabit Ethernet
0
0
0
0
2
Maximum 10/100/100Base-T
RJ-45
12
12
24
2
2
Maximum SFP connectors
2
2
4
8
24
PoE
12
4
4
0
0
Combo
0
0
4
0
2
Width
21.6 cm
(8.50 in.)
21.6 cm
(8.50 in.)
43.8 cm
(17.25 in.)
21.6 cm
(8.50 in.)
43.8 cm
(17.25 in.)
Height
4.4 cm (1.73 in.)
4.4 cm (1.73 in.)
4.4 cm (1.73 in.)
4.4 cm (1.73 in.)
4.4 cm (1.73 in.)
Depth (no PS shelf attached)
26 cm (10.25 in.)
26 cm (10.25 in.)
27.4 cm (10.78 in.)
26 cm (10.25 in.)
27.4 cm (10.78 in.)
Weight (no PS)
2.7 kg (5.96 lb.)
2.42 kg (5.28 lb.)
3.78 kg (8.34 lb.)
2.42 kg (5.28 lb.)
5.3 kg (11.68 lb.)
Weight (with one PS and tray)
3.83 (8.44 lb.)
3.55 kg (7.82 lb.)
5.35 kg (11.8 lb.)
3.55 kg (8.2 lb.)
6.87 kg (15.14 lb.)
Number of ports
Physical dimensions
AlcAtel-lucent OmniSwitch 6855
ALCATEL-LUCENT ENTERPRISE DATA SHEET
2
OS6855-P14
OS6855-14
OS6855-24
OS6855-U10
OS6855-U24X
Operating temperature
-40°C to +70°C
(-40°F to +158°F)
-40°C to +70°C
(-40°F to +158°F)
-40°C to +75°C
(-40°F to +167°F)
-40°C to +70°C
(-40°F to +158°F)
-40°C to +70°C
(-40°F to +158°F)
Storage temperature
-40°C to +85°C
(-40°F to +185°F)
-40°C to +85°C
(-40°F to +185°F)
-40°C to +85°C
(-40°F to +185°F)
-40°C to +85°C
(-40°F to +185°F)
-40°C to +85°C
(-40°F to +185°F)
Humidity (operating and storage)
5% to 95%
5% to 95%
5% to 95%
5% to 95%
5% to 95%
MTBF* (hours)
387,985
430,389
529,644
508,942
373,980
Fanless design
Yes
Yes
No
Yes
Yes***
Acoustic (dB) at <50°C
Silent
Silent
33
Silent
Silent
Acoustic (dB) – all fans on
N/A
N/A
57
N/A
N/A
Power consumption****
33.5 W
30 W
46 W
25 W
51 W
Heat dissipation** (BTU/hr)
114.3
102.4
157
85.3
174
Environment
•
**
***
****
MTBF values calculated at 25•C (77°F) for the switch only
Sufficient spacing required for airflow and heat dissipation
The OS6855-U24X chassis is fanless. The etxernal DC power supplies have fans.
Power consumption was measured from the AC input power using nominal input voltage of 120 V AC and runnnig full traffic on all ports.
Combo ports are ports individually
configurable to be 10/100/1000 Base-T or
1000Base-X, which spuport SFP transceivers for short, long and very long distances.
Gigabit fiber interfaces on the OmniSwitch
6855-U10 and OmniSwitch 6855-U24X
models support Gigabit SFP or 100Base-X
SFP optical transceivers. See the full list of
supported transceivers at the end of the
data sheet.
POWER SUPPLIES
OmniSwitch 6855 models support redundant, hot-swappable AC, DC or PoE power
supplies. The primary and the backup
power supply units are external, allowing
for easier maintenance and replacement.
unit. A power shelf provided with the unit
can slide into the rear of the switch and is
used to hold two power supplies.
Power supplies for OmniSwitch
6855-14, OmniSwitch 6855-P14
and OmniSwitch 6855-u10
Any power supply can be remotely
connected using a cable, which enables
rack mounting using the mounting ears
provided with the unit. This feature allows
for space-sensitive installations requiring
reduced depth (for example, in a wallmounted cabinet).
The power supplies for the half rack models come in the form of a power brick in
either AC or DC variant. A separate power
brick provides PoE power and is available
for purchase when PoE is required.
Power supplies for
OmniSwitch 6855-24 and
OmniSwitch 6855-U24X
The primary and the backup power
supplies for the 24 port models are
modular and connect to the rear of the
Indicators
• Per-port LEDs: link/activity/PoE
• System LEDs: OK (switch HW/SW status)
• PS1/PS2: primary and/or redundant power
supply status
• 7-segment LED on OS6855-U24X
indicating the operational mode
and stack number
POWER SUPPLY MODELS
DESCRIPTION
OS6855-PSS
PSU for OS6855-14 and OS6855-U10; 90 V to 240 V AC, 50 Hz to 60 Hz AC, 40 W, 12 V AC-DC
OS6855-PSS-P
PSU for PoE on OS6855-14; 66 W, 48 V PoE, AC-DC
OS6855-PSS-D
PSU for 6855-14 and OS6855-U10, 40 W, -48 V and 24 V input to 12 V DC-DC
OS6855-PSS-P-D
PSU for PoE on OS6855-14; 66 W, -48 V input DC-DC
OS6855-PSSPH
PSU for PoE on OS6855-P14; 185 W PoE, AC-DC
OS6855-PSL-C
Fanless PSU for OS6855-U24X; 90 V to 240 V AC, 50 Hz to 60 Hz AC; 80 W, 12 V, AC-DC
OS6855-PSL-P
PSU for OS6855-24; 90 V to 240 V AC, 50 Hz to 60 Hz AC; 160 W, 48 VC PoE, 12 V, AC-DC
OS6855-PSL-D
PSU for OS6855-24 and OS6855-U24X; 80 W, -48 V/12 V DC-DC
OS6855-PSL-DL
PSU for OS6855-24 and OS6855-U24X; 80 W, 24 V/12 V DC-DC
Physical dimensions
Weight
Depth
Width
Height
OS6855-PSS, OS6855-PSS-P,
OS6855-PSS-D
0.65 kg (1.3 lb.)
14 cm (5.5 in.)
8.1 cm (3.2 in.)
4.1 cm (1.6 in.)
OS6855-PSS-P-D
0.5 kg (1.1 lb.)
16.6 cm (6.53 in.)
8 cm (3.15 in.)
4.4 cm (1.73 in.)
OS6855-PSSPH
1.03 kg (2.27 lb.)
11.35 cm (4.47 in.)
6.3 cm (2.48 in.)
12.52 cm (4.93 in.)
Power brick tray
0.5 kg (1.35 lb.)
19.1 cm (7.5 in.)
21.6 cm (8.5 in.)
4.4 cm (1.73 in.)
Power supply (AC, DC or PoE)
1.00 kg (2.20 lb.)
16.5 cm (6.5 in.)
16 cm (6.3 in.)
4.4 cm (1.73 in.)
Power supply tray
0.60 kg (1.32 lb.)
17.8 cm (7.0 in.)
35.3 cm (13.88 in.)
4.4 cm (1.73 inn.)
AlcAtel-lucent OmniSwitch 6855
ALCATEL-LUCENT ENTERPRISE DATA SHEET
3
There is no interruption of service when
a new power supply is installed or an old
one replaced.
COMPLIANCE AND
CERTFICATIONS
• EN 50121-4: 2006 for Class A device
Commercial
• C37.90.3 (ESD)
EMI/EMC
• C37.90.2 (Radiated RFI)
• IEEE 1613 (C37.90.x)
Stacking capacity for OS6855-U24X
• Full duplex/aggregated: 20/40 Gbps
Layer 2 switching
• FCC CRF Title 47 Subpart B (Class A)
• IEEE 1613 C37.90.1 (Fast Transient)
• Maximum number of configured VLANs:
4K
• VCCI (Class A)
• IEEE 1613 C37.90.1 (Oscillatory)
• Maximum MAC addresses per system: 16K
• AS/NZS 3548 (Class A)
• IEEE 1613 C37.90 (H.V. Impulse)
• Jumbo frame support: 9216 bytes
• CE marking for European countries (Class A)
• IEEE 1613 C37.90 (Dielectric Strength)
• EN 5502:2006 (Emission Standard)
• EN 61000-3-3:1995 +A2:2005
• EN 61000-3-2:2006
• EN 55024:1998 +A1:2001 +A2:2003
(Immunity Standards)
¬EN 61000-4-2: 1995+ A1:1998
+A2:2001
¬EN 61000-4-3:2006
¬EN 61000-4-4:2004
¬EN 61000-4-5:2006
¬EN 61000-4-6:2007
¬EN 61000-4-8:1993 +A1:2001
¬EN 61000-4-11:2004
• IEEE802.3: Hi-pot Test (2250 V DC on all
Ethernet ports)
• EN 50121-4
neBS**
• GR-63-CORE (temperature, humidity,
altitude, contamination)
• GR-1089-CORE Issue 4 (section 2-3)
• GR-1089-CORE Issue 4 (section 3.2, 4-10)
Industrial
Military
• MIL-STD-810F (shock and vibration)***
• MIL-STD-901D (shock)**
• MIL-STD-167-1 (vibration)**
• MIL-STD-810F**: Methods 500, 501, 502,
503, 504, 505, 506, 507, 508, 509, 510,
512, 514, 515, 516, 520, 521
• MIL-STD-461E**: CE101, CE102, CS101,
CS114, CS115, CS116, RE101, RE 102,
RS101, RS103
Safety agency certifications
• US UL 60950
• IEC 60950-1:2001; all national deviations
• EN 60950-1: 2001; all deviations
• CAN/CSA-C22.2 No. 60950-1-03
• NOM-019 SCFI, Mexico
• AS/NZ TS-001 and 60950:2000, Australia
• UL-AR, Argentina
• UL-GS Mark, Germany
• EN 60825-1 Laser
• IEC 60870-2-2 (operational temperature)
• EN 60825-2 Laser
• IEC 60068-2-1 (temperature type test – cold)
• CDRH Laser
• IEC 60068-2-2 (temperature type test – hot)
• IEC 60721-3-1: Class 1K5 (storage
temperature)
* Note: Class A with UTP cables.
** Contact for availability
*** All models except OS6855-P14 are MIL-810F
compliant
• IEC 68-2-30: 5% to 95% non-condensing
humidity
DETAILED PRODUCT FEATURES
• IEC 60255-21-2 (mechanical chock)
Interface and speeds
• IEC 60255-21-1 (vibration)
EMI/EMC
• EN 61131-2
• EN 61000-6-4: 2007 (emission)
• EN 61000-6-2: 2005 (immunity)
• EN 55024: 1998 (immunity)
¬IEC 61000-4-3
¬IEC 61000-4-12
¬IEC 61000-4-16
¬IEC 61000-4-17
¬IEC 61000-4-29
Switching capacity
• OS6855-U10/-U10D: 10 Gbps Full Duplex
or 20 Gbps aggregate
• OS6855-14/-14D/ -P14: 14 Gbps Full
Duplex or 28 Gbps aggregate
• OS6855-24/-24D/-24DL: 24Gbps Full
Duplex or 48Gbps aggregate
•OS6855-U24X/-U24XD/-U24XDL: 48Gbps
Full Duplex or 96Gbps aggregate
Layer 2 throughput with 64 byte packets
(Mp/s)
• OS6855-U10/-U10D: 14.9 Mp/s
• IEC 60255-5
• OS6855-14/-14D/-P14: 20.8 Mp/s
• IEC 61850-3 (Electric Power Substations)
• OS6855-24/-24D/-24DL: 35.7 Mp/s
• IEC 62236-4:2008 – Railway applications;
Electromagnetic compatibility – Part 4
•OS6855-U24X/-U24XD/-U24XDL:
65.5 Mp/s
AlcAtel-lucent OmniSwitch 6855
ALCATEL-LUCENT ENTERPRISE DATA SHEET
4
Simplified manageability
Management interfaces
• Intuitive, familiar Alcatel-Lucent CLI
reduces training costs
• Easy to use, point-and-click, web-based
element manager (WebView) with built-in
help for easy configuration
• Integrated with Alcatel-Lucent OmniVista™
products for network management
• Full configuration and reporting using
SNMPv1/2/3 across all OmniSwitch
families to facilitate third-party network
management system integration
• Remote switch access using Telnet or
Secure Shell (SSHv2)
• File upload using USB, TFTP, FTP, SFTP, or
SCP for faster configuration
• Human-readable ASCII-based configuration
files for off-line editing, bulk configuration
and out-of-the-box auto-provisioning
Monitoring and troubleshooting
• Local (on the flash) and remote server
logging: Syslog and command log
• Port-based mirroring for trouble- shooting
and lawful interception; supports four
sessions with multiple sources-to-one
destination
• Policy-based mirroring allows selection of
the type of traffic to mirror by using QoS
policies
• Remote port mirroring facilitates passing
mirrored traffic through the network to a
remotely connected device
• Port monitoring feature allows capture
of Ethernet packets to a file to assist in
troubleshooting
• sFlow v5 and RMON for advanced
monitoring and reporting capabilities for
statistics, history, alarms and events
• IP tools: ping and trace route
• Y.1731 and IEEE 802.1ag Ethernet
operations, administration and
maintenance (OA&M): Connectivity
Fault Management and performance
measurements (layer-2 ping and link trace)
• IEEE 802.3ah Ethernet in the First Mile
(EFM) for link monitoring, remote fault
detection, and loop- back control (layer-1
ping)
• Dying Gasp support via SNMP and syslog
messages:
¬Unidirectional Link Detection (UDLD)
detects and disables unidirectional links
on fiber optic interfaces.
¬Digital Diagnostic Monitoring (DDM):
Real-time diagnostics of fiber
connections for early detection of
optical signal deterioration
¬ Link Monitoring: link flap detection
and link error counts to identify bad
connections and automatically make
adjustments to use the links that are good
¬Time Domain Reflectometry (TDR): used
for locating break or other discontinuity
in copper cables.
Network configuration
• Auto-negotiating 10/100/1000 ports
automatically configure port speed and
duplex setting
• IEEE 802.3ad Link Aggregation Control
Protocol (LACP) and static LAG groups
across modules
• Dual-home link support for sub-second
link protection without STP
• Virtual Router Redundancy Protocol
(VRRP) to provide highly available routed
environments
• Bidirectional Forwarding Detection (BFD)
for fast failure detection and reduced
re-convergence times in a routed
environment
• Broadcast, unknown unicast and multicast
storm control to avoid degradation in
overall system performance
• Redundant and hot-swappable power
supplies, transceivers modules offering
uninterruptable service
• Dual image and dual configuration file
storage provides backup
• Auto MDI/MDIX automatically configures
transmit and receive signals to support
straight- through and crossover cabling
• Stacking capability (OS6855- U24X only)
for virtual chassis redundancy. Up to 10-km
fault-tolerant remote stacking supported.
• BOOTP/DHCP client with option 60 allows
auto-configuration of the switch for
simplified deployment
• Split Stack Protection: Auto detection and
recovery of stacks splitting into sub-stacks
due to multiple stacking-link or stack
elements failure*
• DHCP v4/v6 relay to forward client
requests to a DHCP server
• Alcatel-Lucent Mapping Adjacency
Protocol (AMAP) for building topology
maps
• IEEE 802.1AB LLDP with MED extensions
for automated device discovery and IP
phone provisioning
• Multiple VLAN Registration Protocol
(MVRP) and GARP VLAN Registration
Protocol (GVRP) for 802.1Q/1ak-compliant
VLAN pruning and dynamic VLAN creation
• Auto-QoS for switch management and IP
phone traffic
• Network Time Protocol (NTP) for networkwide time synchronization
Resiliency and high availability
• ITU-T G.8032 v2 Ethernet Ring
Protection(ERP) designed for loop
protection and fast convergence times
(sub 50 ms) in ring topologies
• Ring Rapid Spanning Tree Protocol (RRSTP)
optimized for ring topology to provide
less than 100-ms convergence time
• IEEE 802.1s Multiple Spanning Tree
Protocol (MSTP) encompasses IEEE 802.1D
Spanning Tree Protocol (STP) and IEEE
802.1w Rapid Spanning Tree Protocol
(RSTP)
• Per-VLAN spanning tree (PVST+) and
Alcatel-Lucent 1x1 STP mode
AlcAtel-lucent OmniSwitch 6855
ALCATEL-LUCENT ENTERPRISE DATA SHEET
5
* Contact for availability
Advanced security
Access control
• AOS Access Guardian framework for
comprehensive user-policy- based
network access control (NAC)
• Autosensing 802.1X multi-client, multiVLAN support
• MAC-based authentication for non-802.1x
hosts
• Web based authentication (captive portal):
A customizable web portal residing on the
switch
• IEEE 802.1X and MAC-based
authentication, with group mobility and
“guest” VLAN support
• Host integrity check (HIC) agent on each
switch makes it an HIC enforcer and
facilitates endpoint device control for
company policy compliance; quarantine
and remediation are supported as required
• User Network Profile (UNP) simplifies NAC
by dynamically providing pre-defined
policy configuration to authenticated
clients – VLAN, ACL, bandwidth, HIC
• SSHv2 for secure CLI session with public
key infrastructure (PKI) support
• TACACS+ client allows for authentication
authorization and accounting (AAA) with a
remote TACACS+ server
• Centralized RADIUS and Light- weight
Directory Access Protocol (LDAP) user
authentication
• Microsoft Active Directory authentication
snooping (Kerberos)
• Bring Your Own Device (BYOD) – Enables
deployment of advanced, secure BYOD
services in enterprise networks*:
on-boarding of Guest, IT/non-IT issued and
silent devices; Restriction/Remediation of
traffic from non-compliant devices. Uses
RADIUS CoA to dynamically enforce User
Network Profiles based on Authentication,
Profiling, Posture check of devices
* Requires ClearPass
Containment, monitoring and quarantine
• Support for Alcatel-Lucent OmniVista
2500 Quarantine Manager and quarantine
VLAN
• Learned Port Security (LPS) or MAC
address lockdown secures the network
access on user or trunk ports based on
MAC address
• DHCP Snooping, DHCP IP and Address
Resolution Protocol (ARP) spoof protection
• Embedded traffic anomaly detection (TAD)
monitors traffic patterns typical for wormlike viruses and either shuts down the port
or reports to the management system
• ARP poisoning detection
• IP Source Filtering as a protective and
effective mechanism against ARP attacks
• ACLs to filter out unwanted traffic
including denial of service (DoS) attacks;
flow-based filtering in hardware (layer 1
to layer 4)
• Support of Microsoft® Network Access
Protection (NAP)
• Bridge Protocol Data Unit (BPDU) blocking
automatically shuts down user ports to
prevent topology loops if an STP BPDU
packet is seen
• STP Root Guard prevents edge devices
from becoming STP root nodes
• LLDP Security mechanism for rogue device
detection and restriction
Converged networks
PoE
• Dynamic PoE allocation delivers only the
power needed by the attached device
up to the total power budget for most
efficient power consumption
• PoE models support Alcatel- Lucent IP
phones and WLAN access points, as well
as any IEEE 802.3af-compliant end device
• Configurable per-port PoE priority and
max power for power allocation
QoS
• Priority queues: Eight hardware- based
queues per port for flexible QoS
management
• Traffic prioritization: Flow-based QoS with
internal and external prioritization (also
known as re-marking)
• Neighbor Discovery Protocol (NDP)
• Bandwidth management: Flow- based
bandwidth management, ingress rate
limiting; egress rate shaping per port
• Internet Group Management Protocol
(IGMP) v1/v2/v3 snooping for optimized
multicast traffic
• Queue management: Configurable
scheduling algorithms: Strict Priority
Queuing (SPQ), Weighted Round Robin
(WRR) and Deficit Round Robin (DRR)
• Protocol Independent Multicast – Sparse
Mode (PIM-SM)/Protocol Independent
Multicast – Dense Mode (PIM-DM)
• Congestion avoidance: Support for Endto-End Head-of-Line (E2E-HOL) blocking
prevention and flow control
• LLDP network polices for dynamic
designation of VLAN-ID and layer-2/
layer-3 priority for IP phones
• Auto-QoS for switch management traffic
as well as traffic from Alcatel-Lucent IP
phones
• Differentiated Services for Virtual Desktop
Interface (VDI) flows. One-touch QOS
support for Citrix VDI
Fluent network for voice, video and data
• Session Initiation Protocol (SIP) detection,
session monitoring and tracking
• Provides real time conversation quality
information contained in the SIP packets
concerning packet loss, delay, jitter, MOS
score, R-Factor in real time
• SIP profile for QOS, priority tuning for
end-to-end processing
• Multicast DNS Relay: Bonjour protocol
Support for wired Airgroup™
• DHCP relay for IPv6
iPv4/iPv6 multicast
SUPPORTED STANDARDS
IEEE standards
• IEEE 802.1D (STP)
• IEEE 802.1p (CoS)
• IEEE 802.1Q (VLANs)
• IEEE 802.1ad (Provider Bridges)
• IEEE 802.1ag (Connectivity Fault
Management)
• Distance Vector Multicast Routing Protocol
(DVMRP)
• IEEE 802.1ak (Multiple VLAN Registration
Protocol)
• Multicast Listener Discovery (MLD) v1/v2
snooping for optimized multicast traffic
• IEEE 802.1s (MSTP)
Metro Ethernet access
• Ethernet services support per IEEE
802.1ad Provider Bridge services (also
known as Q-in-Q or VLAN stacking):
¬Service VLAN (SVLAN) and Customer
VLAN (CVLAN) transparent LAN services
¬Ethernet network-to-network interface
(NNI) and user network interface (UNI)
services
• IEEE 802.1w (RSTP)
• IEEE 802.1X (Port-based Network Access
Control)
• IEEE 802.3i (10Base-T)
• IEEE 802.3u (Fast Ethernet)
• IEEE 802.3x (Flow Control)
• IEEE 802.3z (Gigabit Ethernet)
• IEEE 802.3ab (1000Base-T)
• IEEE 802.3ac (VLAN Tagging)
¬Service Access Point (SAP) Profile
identification
• IEEE 802.3ad (Link Aggregation)
¬CVLAN to SVLAN translation and
mapping
• IEEE 802.3af (Power over Ethernet)
• Ethernet OA&M compliant with ITU
Y.1731 and IEEE 802.1ag version 8.1
for connectivity fault and performance
management and IEEE 802.3ah EFM for
link OA&M
• Service Assurance Agent (SAA) for SLA
compliance validation
• IEEE 802.3ae (10G Ethernet)
ITU-T standards
• ITU-T G.8032: Draft (June 2007) Ethernet
Ring Protection
• ITU-T Y.1731 OA&M fault and performance
management
IETF standards
• Customer provider edge (CPE) test head
traffic generator and analyzer tool used
in the metro Ethernet network to validate
customer Service Level Agreements (SLA)
• RFC 2003 IP/IP Tunneling
• Static routing, Routing Information
Protocol (RIP) v1 and v2
• TR-101 PPPoE Intermediate Agent
allowing for the PPPoE network access
method
• RFC 1253/1850/2328 OSPF v2 and MIB
• Open Shortest Path First (OSPF) v2,
Border Gateway Protocol (BGP) v4
• MAC-Forced Forwarding support according
to RFC 4562
• RFC 1765 OSPF Database Overflow
• Generic Routing Encapsulation (GRE)
and IP/IP tunneling
• Private VLAN feature for user traffic
segregation
• RFC 2370/3630 OSPF Opaque LSA
• Graceful restart extensions for OSPF
and BGP
• DHCP Option 82: Configurable relay agent
information
• VRRP v2
• IP Multicast VLAN (IPMVLAN) for
optimized multicast replication at the edge
saving network core resources
Layer-3 routing and multicast
iPv4 routing
• Multiple VRF for network Segmentation
and Inter-VRF route leaking
• DHCP relay (including generic UDP relay)
•ARP
iPv6 routing
• Optimized Ethernet access services delivery
• Static routing
¬Network bandwidth protection against
overload of video traffic
• Routing Information Protocol Next
Generation (RIPng)
• OSPF v3
• BGP v4 (with extensions to IPv6 routing)
• Graceful restart extensions for OSPF
and BGP
• VRRP v3
AlcAtel-lucent OmniSwitch 6855
ALCATEL-LUCENT ENTERPRISE DATA SHEET
6
¬Multicast streams isolation from multiple
content providers over the same
interface
iPv4
• RFC 2784 GRE Tunneling
OSPF
• RFC 1587/3101 OSPF NSSA Option
• RFC 2154 OSPF MD5 Signature
• RFC 3623 OSPF Graceful Restart
RiP
• RFC 1058 RIP v1
• RFC 1722/1723/1724/2453/1724 RIP v2
and MIB
• RFC 1812/2644 IPv4 Router Requirements
• RFC 2080 RIPng for IPv6
BGP
• RFC 1269/1657 BGP v3 & v4 MIB
• RFC 1403/1745 BGP/OSPF Interaction
• RFC 1771-1774/2842/2918/3392 BGP v4
• MEF 9 and 14 certified
• RFC 1965 BGP AS Confederations
• Managed by Alcatel-Lucent 5620 Service
Aware Manager
• RFC 1966 BGP Route Reflection
• RFC 1997/1998 BGP Communities
Attribute
• RFC 2042 BGP New Attribute
Manageability
QoS
• RFC 2385 BGP MD5 Signature
• RFC 854/855 Telnet and Telnet options
• RFC 896 Congestion Control
• RFC 2439 BGP Route Flap Damping
• RFC 959/2640 FTP
• RFC 1122 Internet Hosts
• RFC 2545 BGP-4 Multiprotocol Extensions
for IPv6 Inter-Domain Routing
• RFC 1155/2578-2580 SMI v1 and SMI v2
• RFC 1157/2271 SNMP
• RFC 2474/2475/2597/3168/3246
DiffServ
• RFC 2796 BGP Route Reflection
• RFC 1212/2737 MIB and MIB-II
• RFC 2697 srTCM
• RFC 2858 Multiprotocol Extensions for
BGP-4
• RFC 1213/2011-2013 SNMP v2 MIB
• RFC 2698 trTCM
• RFC 1215 Convention for SNMP Traps
• RFC 3635 Pause Control
• RFC 3065 BGP AS Confederations
• RFC 1350 TFTP Protocol
iP multicast
• RFC 1075 DVMRP
• RFC 1112 IGMP v1
• RFC 2236/2933 IGMP v2 and MIB
• RFC 2362/4601 PIM-SM
• RFC 2365 Multicast
• RFC 2710 — Multicast Listener Discovery
for IPv6
• RFC 2715/2932 Multicast Routing MIB
• RFC 2934 PIM MIB for IPv4
• RFC 3376 IGMPv3
• RFC 4541 Considerations for IGMP
and MLD snooping• RFC 5060 Protocol
Independent Multicast MIB
• RFC 5132 IP Multicast MIB
• RFC 5240 PIM Bootstrap Router MIB
iPv6
• RFC 1886/3596 DNS for IPv6
• RFC 2292/2553/3493/3542 IPv6 Sockets
• RFC 2373/2374/3513/3587 IPv6
Addressing
• RFC 2460//2462/2464 Core IPv6
• RFC 2461 NDP
Others
• RFC 1573/2233/2863 Private Interface MIB
• RFC 768 UDP
• RFC 1643/2665 Ethernet MIB
• RFC 791/894/1024/1349 IP and IP/
Ethernet
• RFC 1901-1908/3416-3418 SNMP v2c
• RFC 2096 IP MIB
• RFC 2131 DHCP server/client
• RFC 2570-2576/3411-3415 SNMP v3
• RFC 2616 /2854 HTTP and HTML
• RFC 2667 IP Tunneling MIB
• RFC 2668/3636 IEEE 802.3 MAU MIB
• RFC 2674 VLAN MIB
• RFC 3414 User based Security model
• RFC 4251 Secure Shell Protocol
architecture
• RFC 4252 The Secure Shell (SSH)
Authentication Protocol
• RFC 4878 OA&M Functions on EthernetLike Interfaces
Security
• RFC 792 ICMP
• RFC 793/1156 TCP/IP and MIB
• RFC 826/903 ARP and Reverse ARP
• RFC 919/922 Broadcasting internet
datagram
• RFC 925/1027 Multi LAN ARP/ Proxy ARP
• RFC 950 Subnetting
• RFC 951 BOOTP
• RFC 1151 RDP
• RFC 1191/1981 Path MTU Discovery
• RFC 1256 ICMP Router Discovery
• RFC 1305/2030 NTP v3 and Simple NTP
• RFC 1493 Bridge MIB
• RFC 1518/1519 CIDR
• RFC 1541/1542/2131/3396/3442 DHCP
• RFC 1321 MD5
• RFC 1757/2819 RMON and MIB
• RFC 2104 HMAC Message Authentication
• RFC 2131/3046/3315/4649/6221 DHCP/
BOOTP Relay
• RFC 2138/2865/2868/3575/2618 RADIUS
Authentication and Client MIB
• RFC 2132 DHCP Options
• RFC 2463/2466/4443 ICMP v6 and MIB
• RFC 2139/2866/2867/2620 RADIUS
Accounting and Client MIB
• RFC 2251 LDAP v3
• RFC 2452/2454 IPv6 TCP/UDP MIB
• RFC 2228 FTP Security Extensions
• RFC 2893/4213 IPv6 Transition
Mechanisms
• RFC 3021 Using 31-bit prefixes
• RFC 2267 Network Ingress Filtering
• RFC 3060 Policy Core
• RFC 2284 PPP EAP
• RFC 3176 sFlow
• RFC 2869 RADIUS Extension
• RFC 4562 MAC-Forced Forwarding
• RFC 3579 RADIUS for EAP
• RFC 5880, 5881, 5882 BFD
• RFC 3056 IPv6 Tunneling
• RFC 3542/3587 IPv6
• RFC 3595 TC for Flow Label
• RFC 4007 IPv6 Scoped Address
Architecture
• RFC 4193 Unique Local IPv6 Unicast
Addresses
AlcAtel-lucent OmniSwitch 6855
ALCATEL-LUCENT ENTERPRISE DATA SHEET
7
• RFC 3576 Dynamic Authorization
Extensions to RADIUS
• RFC 2338/3768/2787 VRRP and MIB
OMNISWITCH 6588 ORDERING
OmniSwitch 6855 models
OS6855-14,
OS6855-14D
Layer-3 fixed-configuration fanless switch in a 1U form factor. It has 12 RJ-45 connectors individually configurable to
10/100/1000Base-T, four of which are PoE–capable, and two SFP ports that support various distances. An OS6855-PSS
or OS6855-PSS-D power supply respectively is included in the bundle.
OS6855-P14
Layer-3 fixed-configuration fanless switch in a 1U form factor. It has 12 RJ-45 connectors individually configurable to
10/100/1000Base-T, all of which are PoE capable, and two SFP ports that support various distances. The bundle comes
with system power supply (OS6855-PSS), PoE power supply (OS6855-PSSPH), power shelves, and power cord.
OS6855-U10
OS6855-U10D
Layer-3 fixed-configuration fanless switch in a 1U form factor. It has two RJ-45 connectors individually configurable
to 10/100/1000Base-T, and eight SFP ports that support various distances. An OS6855-PSS or OS6855-PSS-D power
supply respectively is included in the bundle.
OS6855-24,
OS6855-24DL,
OS6855-24D
Layer-3 fixed-configuration switch in a 1U form factor. It has 20 RJ-45 connectors individually configurable to
10/100/1000Base-T, four of which provide PoE and four combo ports. On the combo ports, either copper or fiber
can be used on a one-for-one basis. An OS6855-PSL-P, OS6855-PSL-D or OS6855-PSL-DL power supply respectively is
included in the bundle.
OS6855-U24X,
OS6855-U24XDL,
OS6855-U24XD
Layer-3 fixed-configuration switch in a 1U form factor. It has two 10G SFP+ ports, 22 SFP ports that support
various distances, and two combo ports. On the combo ports, either RJ-45 connectors individually configurable
to 10/100/1000Base-T, or fiber SFP can be used on a one-for-one basis. The 10G SFP+ ports can be used either
as uplinks or as stacking ports. An OS6855-PSL-C, OS6855-PSL-DL or OS6855-PSL-D power supply respectively is
included in the bundle.
OmniSwitch 6855 backup power supplies for OS6855-14, -P14 and –U10
OS6855-PSS
OS6855-PSS power brick AC power supply. Provides only system power. Does not provide PoE. Ships with country
specific power cord.
OS6855-PSS-P
OS6855-PSS-P power brick AC power supply. Provides PoE only power to one OS6855-14. Ships with country specific
power cord.
OS6855-PSS-D
OS6855-PSS-P-D power brick 48V DC power supply. Provides PoE only power to one OS6855-14
OS6855-PSS-P-D
OS6855-PSS-P-D power brick 48V DC power supply. Provides PoE only power to one OS6855-14. Up to 66 W at
-40 to +45C and 42W at ambient -40 to +75C.
OS6855-PSSPH
OS6855-PSSPH power brick AC power supply. Provides up to 180W of PoE only power to one OS6855-P14.
OmniSwitch 6855 backup power supplies for OS6855-24 and OS6855-U24X
OS6855-PSL-P
OS6855-PSL-P modular AC backup power supply. Provides backup system and PoE power to one OS6855-24 switch.
OS6855-PSL-D
OS6855-PSL-D modular -48V DC backup power supply. Provides backup system power to one 24 port 6855 switch.
OS6855-PSL-DL
OS6855-PSL-DL modular 24V DC backup power supply. Provides backup system power to one 24 port 6855 switch.
OS6855-PSL-C
OS6855-PSL-C fanless modular AC backup power supply. Provides backup system power to one OS6855-U24X switch.
Transceivers
All optical transceivers qualified for the OmniSwitch 6855 operate at a wider operating temperature range than the
corresponding commercial types.
iSFP-10G-LR
10G industrial optical transceiver (SFP+). Supports single-mode fiber over 1310 nm wavelength (nominal) with an
LC connector. Typical reach of 10 km.
iSFP-GIG-LH70
1000Base-LH industrial transceiver. Supports single-mode fiber over 1550 nm wavelength (nominal) with an
LC connector. Typical reach of 70 km.
iSFP-GIG-LH40
1000Base-LH industrial transceiver Supports single-mode fiber over 1310 nm wavelength (nominal) with an
LC connector. Typical reach of 40 km.
iSFP-GIG-LX
1000Base-LX industrial transceiver Supports single-mode fiber over 1310 nm wavelength (nominal) with an
LC connector. Typical reach of 10 km.
iSFP-GIG-SX
1000Base-SX industrial transceiver. Supports multimode fiber over 850 nm wavelength (nominal) with an
LC connector. Typical reach of 300 m.
iSFP-GIG-T
1000Base-T Gigabit industrial Ethernet Transceiver (SFP MSA). Supports category 5, 5E, and 6 copper cabling up
to 100 m. SFP supports 10/100/1000 Mb/s and full-duplex mode.
iSFP-GIG-BX-U
1000Base-BX SFP transceiver with an LC type interface. Supports single-mode fiber on a single strand link up to
10 km. Transmits 1310 nm and receives 1490 nm optical signal.
iSFP-GIG-BX-D
1000Base-BX SFP transceiver with an LC type interface. Supports single-mode fiber on a single strand link up to
10 km. Transmits 1490 nm and receives 1310 nm optical signal.
iSFP-100-MM
100Base-FX industrial transceiver with an LC type interface. This transceiver is designed for use over multimode fiber.
AlcAtel-lucent OmniSwitch 6855
ALCATEL-LUCENT ENTERPRISE DATA SHEET
8
OmniSwitch 6855 models
iSFP-100-SM15
100Base-FX industrial transceiver with an LC type interface. This transceiver is designed for use over single-mode
fiber up to 15 km.
iSFP-100-SM40
100Base-FX industrial transceiver with an LC type interface. This transceiver is designed for use over single-mode
fiber up to 40 km.
iSFP-100-BX-U
100Base-BX industrial transceiver with an SC type interface. This bidirectional transceiver is designed for use over
single-mode fiber on a single strand link up to 20 km point-to-point. This transceiver is normally used in the client
(ONU) and transmits 1310 nm and receives 1550 nm optical signal.
iSFP-100-BX-D
100Base-BX industrial SFP transceiver with an SC type interface. This bidirectional transceiver is designed for use
over single mode fiber on a single strand link up to 20 km point-to-point. This transceiver is normally used in the
central office (OLT) and transmits 1550 nm and receives 1310 nm optical signal.
SERVICE AND SUPPORT
Warranty
Limited lifetime hardware warranty: Limited to the original owner, and will be provided for up to 5 years after the product’s
End-of-Sales announcement.
enterprise.alcatel-lucent.com Alcatel-Lucent and the Alcatel-Lucent Enterprise logo are trademarks of Alcatel-Lucent.
To view Alcatel-Lucent Enterprise trademarks visit: enterprise.alcatel-lucent.com/trademarks. All other trademarks are the
property of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent Enterprise
assumes no responsibility for inaccuracies contained herein. Copyright © 2015 Alcatel-Lucent Enterprise. All Rights Reserved.
201502050007EN (February)