DRX5675 Cover~P04,49 99.10.6 5:48 PM Page 2 11. ESPECIFICACIONES Owner’s manual Mode d’emploi Manual de instrucciones Sintonizador de FM Generales Game de frecuencias: 87,9 MHz a 107,9 MHz Sensibilidad útil: 11 dBf Sensibilidad a 50 dB de silenciamiento: 17 dBf Selectividad de canal alternativo: 75 dB Separación estéreo (1 kHz): 35 dB Respuesta en frecuencia (±3 dB): 30 Hz a 15 kHz Tensión de alimentación: 14,4 V CC (permisible de 10,8 V a 15,6 V), negativo a masa Consumo de corriente: Menos de 15 A Impedancia de los altavoces: 4 Ω (permisible de 4 Ω a 8 Ω) Peso: 3,97 lb. (1,8 kg) Dimensiones: 7” (178 mm) de anchura × 2” (50 mm) de altura × 6” (152 mm) de fondo Sintonizador de AM 2” (50 mm) 7-3/8” (188 mm) 2-1/4” (58 mm) 6” (152 mm) Reproductor de discos compactos 7” (178 mm) Sistema: Sistema de audio de discos compactos Discos utilizables: Discos compactos Respuesta en frecuencia: 10 Hz a 20 kHz (±1dB) Relación señal-ruido: 96 dB (1 kHz) IHF-A Gama dinámica: 95 dB (1 kHz) Audio Notas: Salida de potencia máxima: 180 W (45 W × 4 ch) Salida de potencia media continua: 14 W × 4, con 4 Ω, 20 Hz a 20 kHz,1% de distorsión armónica total Acción de control de graves (100 Hz): ±10 dB Acción de control de agudos (10 kHz): ±10 dB Salida de línea (con CA, 1 kHz, 10 kΩ): 1,8 V • Las • ■ Contents English 1. PRECAUTIONS ..........................................................2 2. CONTROLS ................................................................3 3. BUTTON TERMINOLOGY..........................................4 4. FEATURES..................................................................5 5. HANDLING COMPACT DISCS...................................6 6. DCP (Detachable Control Panel)..............................7 7. REMOTE CONTROLL ................................................8 8. OPERATION..............................................................10 9. TROUBLESHOOTING ..............................................16 10.ERROR DISPLAYS ...................................................17 11.SPECIFICATIONS.....................................................18 ■ Table des matières Français especificaciones están de acuerdo con las normas de la EIA. Las especificaciones y el diseño están sujetos a cambio sin previo aviso por motivo de mejoras. 1. PRÉCAUTIONS ........................................................19 2. COMMANDES.............................................................3 3. NOMENCLATURE DES TOUCHES .........................20 4. CARACTÉRISTIQUES..............................................21 5. MANIPULATION DES DISQUES COMPACTS ........22 6. CLAVIER DE COMMANDE AMOVIBLE (DCP) .......23 7. TÉLÉCOMMANDE....................................................24 8. FONCTIONNEMENT.................................................26 9. DÉPISTAGE DES PANNES......................................32 10.AFFICHAGE DES ERREURS ..................................33 11.SPÉCIFICATIONS.....................................................34 ■ Índice Español Español 1. PRECAUCIONES......................................................35 2. CONTROLES ..............................................................3 3. NOMENCLATURA DE LOS BOTONES...................36 4. CARACTERÍSTICAS ................................................37 5. MANEJO DE LOS DISCOS COMPACTOS..............38 6. PANEL DE CONTROL DESMONTABLE (DCP) ......39 7. CONTROLADOR REMOTO .....................................40 8. OPERACIÓN.............................................................42 9. SOLUCIÓN DE PROBLEMAS .................................48 10.INDICACIONES DE ERROR ....................................49 11.ESPECIFICACIONES ...............................................50 DRX5675 AM/FM CD PLAYER WITH CD CHANGER CONTROL • RADIO AM/FM-LECTEUR CD AVEC PILOTAGE DE CHANGEUR CD • RADIO AM/FM Y REPRODUCTOR CD CON CONTROL DE CAMBIADOR DE CD 1. When the inside of the car is very cold and the player is used soon after switching on the heater, moisture may form on the disc or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth. If moisture forms on the optical parts of the player, do not use the player for about one hour and the condensation will disappear naturally to allow normal operation. 2. Driving on extremely bumpy roads which cause severe vibration may cause the sound to skip. 3. This unit uses a precision mechanism. Even in the event that trouble arises, never open the case, disassemble the unit, or lubricate the rotating parts. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to consult the dealer or an experienced radio/TV technician for help. CAUTION USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL. MODEL DRX5675 12V GROUND AM 530-1710kHz/FM 87.9-107.9MHz THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS PRODUCTION COMPLIES WITH DHHS RULES 21 CFR SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE. CLARION CO.,LTD. 50 KAMITODA,TODA-SHI,SAITAMA-KEN,JAPAN Bottom View of Source Unit 051 722 877 MANUFACTURED: SERIAL No. PE-2310B 286- 324-00 Clarion Co.,Ltd. MADE IN CHINA INFORMATION FOR USERS: CHANGES OR MODIFICATIONS TO THIS PRODUCT WILL VOID THE WARRANTY AND WILL VIOLATE FCC APPROVAL. Clarion Co., Ltd. 1999/10 (S • C) All Rights Reserved. Copyright © 1999: Clarion Co., Ltd. Printed in China / Imprimé en Chine / Impreso en China PE-2310B 280-7426-00 Be sure to unfold and read the next page. Veuillez déployer et vous référer à la page suivante. Cerciórese de desplegar y de leer la página siguiente. DRX5675 2 English Respuesta en frecuencia: 530 kHz a 1.710 kHz Sensibilidad útil: 25 µV 1. PRECAUTIONS DRX5675 Cover~P04,49 99.10.6 5:49 PM Page 3 2. CONTROLS / COMMANDES / CONTROLES 3. BUTTON TERMINOLOGY Note: Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter. Remarque: Veuillez déployer cette page et vous référer aux schémas quand vous lisez chaque chapitre. Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas. • Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLS on page 3 (unfold). 1 DCP Release Button 1 2 3 2 A-M (Audio Mode) Button 3 POWER Button FNC (Function) Button English English 4 Eject ( ) Button Esta indicación de error significa que el captor se ha desenfocado debido a un disco rayado o a otro factor durante la reproducción de la unidad fuente o del cambiador de discos compactos. ➜ Compruebe el disco compacto. 5 DISP (Display) Button 6 ISR (Instant Station Recall) Button 7 RDM (Random) Button %$ # @ ! 0 987 6 Solución Esta indicación de error significa que se ha producido un problema en el mecanismo de la unidad fuente o del cambiador de discos compactos (por ejemplo, el disco no puede cambiar ni expulsarse). ➜ Compruebe la unidad fuente y el cambiador de discos compactos. LD (Loudness) Button 4 5 ■ Para proteger el sistema, esta unidad posee funciones de diagnóstico automático. Cuando se presente algún problema, éste se notificará con indicaciones de error. Tome las medidas indicadas para solucionar el problema. Indicación de error SOURCE UNIT / APPAREIL PILOTE / UNIDAD FUENTE CD Insertion Slot Fente d’insertion de CD Ranura de inserción del disco compacto 10. INDICACIONES DE ERROR Indica que el índice (TOC) del disco compacto no puede ser leído debido a que, por ejemplo, el disco seleccionado está al revés. 8 RPT (Repeat) Button 9 SCN (Scan) Button Français PS/AS (Preset Scan/Auto Store) Button 0 Preset Buttons (1 to 6) DISPLAY AFFICHEUR VISUALIZADOR Direct Buttons (1 to 6) ! Z-EHCR (Z-enhancer) Button @ BND (Band) Button TOP (Top Play) Button MAG (Magazine) Button and ) Buttons Español Español # SRCH (Search) Left and Right ( $ Rotary Knob % Play/Pause ( ) Button MUTE Button 3 DRX5675 280-7426-00 4 DRX5675 DRX5675 49 4. FEATURES ■ Rotary Encoder Volume Control ■ DIN Chassis with Detachable Control Panel ■ Z-Enhancer with 3 Mode Sound Selector ■ ® FM Reception System ■ AM/FM Bands-1 AM, 3 FM/18 FM/6 AM Touchbutton Memory ■ 8-Times Oversampling Digital Filter and Dual 1-Bit D/A Converters ■ Zero-Bit Detector™ Mute Circuit ■ Repeat/Random Play/Intro Music Scan English ■ Multi-Color LC Display ■ 4-Channel RCA Line Level Output with Fader Control ■ 180 W (45 W × 4) Maximum Power Output ■ Infrared Remote Control DRX5675 5 5. HANDLING COMPACT DISCS This unit has been designed specifically for playback of compact discs bearing the mark. No other discs can be played. Note on Compact Discs Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen. To remove the compact disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. Removing the disc No Proper way to hold the compact disc English Always handle the compact disc by the edges. Never touch the surface. Do not use any solvents such as commercially available cleaners, anti-static spray, or thinner to clean compact discs. No To remove fingermarks and dust, use a soft cloth, and wipe in a straight line from the center of the compact disc to the circumference. No Do not use compact discs that have large scratches, are misshapen, or cracked, etc. Use of such discs will cause misoperation or damage. No New discs may have some roughness around the edges. The unit may not work or the sound may skip if such discs are used. Use a ball-point pen, etc. to remove roughness from the edge of the disc. Ball-point pen Roughness Do not expose compact discs to direct sunlight or any heat source. No Note: • Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc. These may get caught in the internal mechanism and damage the disc. 6 DRX5675 6. DCP (Detachable Control Panel) The control panel can be detached to prevent theft. When detaching the control panel, store it in the included DCP case to prevent scratches. We recommend taking the detachable control panel with you when leaving the car. Removing the DCP 1. Turn off the power. 2. Press the DCP Release button 1. CAUTION DCP Rear Panel DCP connector * The DCP is unlocked. Source unit connector 3. Remove the DCP. Attaching the DCP Insert the DCP into the right side of the source unit and press the left side to lock it. Source Unit Front Note: • If the DCP is dirty, wipe off with a soft, dry cloth only. CAUTION Do not insert the DCP from the left side. Doing so may damage it. Storing the DCP in the DCP Case Hold the DCP, in the orientation as shown in the figure below, and put it into the supplied DCP case. (Ensure the DCP is in the correct orientation.) DRX5675 7 English • The DCP can easily be damaged by shocks. After removing it, place it in a protective case and be careful not to drop it or subject it to strong shocks. • When the release button is pressed and the DCP is unlocked, the car’s vibrations may cause it to fall. To prevent damage to the DCP, always store it in a protective case after detaching it. • The rear connector that connects the source unit and the DCP is an extremely important part. Be careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc. 7. REMOTE CONTROL Receiver for remote control unit Operating range: 30° in all directions English Remote Control Unit ¥ * Signal transmitter ) ( & ™ ¡ £ ¢ § ∞ Inserting the Batteries 1. Turn the remote control unit over, then slide the rear cover in the direction of the arrow. 2. Insert the AA (UM-3/1.5 V) batteries that came with the remote control unit facing in the directions shown in the figure, then close the rear cover. AA (UM-3/1.5 V) Batteries Notes: Using batteries improperly can cause them to explode. Take note of the following points: • When replacing batteries, replace both batteries with new ones. • Do not short-circuit, disassemble or heat batteries. • Do not dispose of batteries into fire or flames. • Dispose of spent batteries properly. 8 DRX5675 Rear cover Rear side Functions of Remote Control Unit Buttons Mode Button Radio CD CD changer ¥ FUNC Turns power on and off. When pressed and held for 1 second: Turns power off. Switches between radio, CD and CD changer. & BAND DISC UP PROG TOP Switches reception band. * VOLUME Increases and decreases volume (in all modes). ( SEARCH Moves preset channels up and down. Moves tracks up and down. When pressed and held for 1 second: Fast-forward/ fast-backward. Moves tracks up and down. When pressed and held for 1 second: Fast-forward/ fast-backward. ) PLAY/PAUSE Turns mute on and off. Switches between playback and pause. Switches between playback and pause. ¡ MUTE Turns mute on and off. Switches between playback and pause. Switches between playback and pause. ™ ISR Recalls ISR radio station in memory. Press and hold for more than 2 seconds: Stores current station into ISR memory (radio mode only). £ DISP Switches among main display, sub display and clock display. ¢ SCAN PS/AS Preset scan. When pressed and held for 2 seconds: Auto store. Scan play. Scan play. When pressed and held for 2 seconds: Disc scan play. ∞ RPT BLS No function. Repeat play. Repeat play. When pressed and held for 2 seconds: Disc repeat play. § RDM DOLBY NR MONI No function. Random play. Random play. When pressed and held for 2 seconds: Disc random play. Plays the first track. Top play. Moves the next disc in increasing order. English * Some of the corresponding buttons on the source unit and remote control unit have different functions. DRX5675 9 8. OPERATION Note: • Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLS on page 3 (unfold). Basic Operations CAUTION When this unit is turned on, starting and stopping the engine of a car with its volume raised to the maximum level may harm your hearing. Be careful about adjusting the volume. English Turning ON the Power and Adjusting the Volume Adjusting the Treble 1) Press A-M button 2 and select “TREB”. 2) Turning the Rotary knob $ clockwise emphasizes the treble; turning it counterclockwise attenuates the treble. * The factory default setting is “0”. (Adjustment range: –6 to +6) 3) When the adjustment is complete, press A-M button 2 several times until the function mode is reached. 1) Press the POWER button 3. * To turn off the power, press the POWER button 3 for 1 second or longer. 2) Press the FNC button 3 and select another operation mode. Every time the FNC button 3 is pressed, the display changes the operation mode as: Radio ➜ CD ➜ CD changer ➜ Radio factory default setting is “0”. (Adjustment range: L9 to R9) • The operation mode not connected to the unit will not be selected. If the CD mode is selected when no disc is inserted, the display flashes “ DISC”. 3) Turning the Rotary knob $ clockwise increases the volume; turning it counterclockwise decreases the volume. * The volume level is from 0 (minimum) to 33 (maximum). Audio Mode Adjustments Press the A-M button 2 to select the adjustment mode. The mode switches as follows each time the A-M button is pressed: BASS ➜ TREB ➜ BAL ➜ FAD ➜ Previous mode Adjusting the Bass 1) Press A-M button 2 and select “BASS”. 2) Turning the Rotary knob $ clockwise emphasizes the bass; turning it counterclockwise attenuates the bass. * The factory default setting is “0”. (Adjustment range: –6 to +6) 3) When the adjustment is complete, press A-M button 2 several times until the function mode is reached. 10 1) Press A-M button 2 and select “BAL”. 2) Turning the Rotary knob $ clockwise emphasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker. * The Notes: • Adjusting the Balance DRX5675 3) When the adjustment is complete, press A-M button 2 several times until the function mode is reached. Adjusting the Fader 1) Press A-M button 2 and select “FAD”. 2) Turning the Rotary knob $ clockwise emphasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers. * The factory default setting is “0”. (Adjustment range: F9 to R9) 3) When the adjustment is complete, press A-M button 2 several times until the function mode is reached. Setting the Z-enhancer Radio Mode Operations This unit comes with three types of sound tone effects stored in memory. Select the one you prefer. FM Reception * The factory default setting is “Z-EHCR OFF”. Loudness Effect In order to turn on/off the loudness effect, use the LD button 2 for 2 seconds or longer. Every time the LD button 2 is pressed and held for 2 seconds or longer, the loudness effect switches on and off. * When the loudness effect is on, the display will show “LD”. ® For enhanced FM performance the tuner includes signal actuated stereo control and Multipath noise reduction circuits. Listening to the Radio 1) Press the FNC button 3 to select the radio mode, then the radio will be on. 2) To select a preset band, press the BND button @, then select one of the preset bands such as FM1, FM2, FM3, or AM. Every time the BND button @ is pressed, the display will change as: FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1 3) Press the SRCH Left/Right button #, then the station at which there is a broadcast will be selected (Seek selection). Mute Every time the DISP button 5 is pressed, the display will change between the operation mode and the clock display. Use this function to turn off the sound immediately. Press the MUTE button %. The sound turns off and “MUTE” appears on the display. Press the MUTE button again to cancel the mute mode. Setting the Clock Manual Tuning 1) Press the DISP button 5 to display the clock display. 2) Press and hold the DISP button 5 for 2 seconds or longer. 3) Press the SRCH Left button #, then set the current hour. 4) Press the SRCH Right button #, then set the current minute. 5) Press the DISP button 5, then the clock is set. 1) Press the BND button @, then select FM1, FM2, FM3 or AM. 2) Press and hold the BND button @ for 2 seconds or longer, then the display will show “MANU”, which means that a manual selection function is on. 3) Press the SRCH Left/Right button # and select the right station. Notes: 1) Press the BND button @, then select FM1, FM2, FM3 or AM. 2) If the “MANU” on the display is on, press and hold the BND button @ for 2 seconds or longer. When the “MANU” display is off, the Seek Selection function is on. 3) Press the SRCH Left/Right button #, then when it selects the station in which there is a broadcast, it automatically stops. Switching the Clock Display • If • you select another operation mode while you are setting the clock, the clock setting operation will be canceled. If you remove the vehicle’s battery for a check or repair, the clock will be reset, so you must set it again. Seek Tuning DRX5675 11 English Each time you press Z-EHCR button !, the tone effect changes in the following order. “Z-ENHANCER 1” ➜ “Z-ENHANCER 2” ➜ “Z-ENHANCER 3” ➜ “Z-EHCR OFF” ➜ “Z-ENHANCER 1”... • Z-ENHANCER 1: bass emphasized • Z-ENHANCER 2: treble emphasized • Z-ENHANCER 3: bass and treble emphasized • Z-EHCR OFF: no sound effect Preset Memory Function Preset Memory Function can store up to 24 stations: six stations for each of FM1, FM2, FM3 and AM. Note: • When the present memory function is used, all the content of the memory will be erased. English Manual memory function 1) Press the BND button @, and select the band you want to store in the memory. 2) Press the SRCH Left/Right button # then select the station you want to store in the memory. 3) Press and hold the Preset button 0 for 2 seconds or longer, then the station will be stored in the memory. Auto store function (Automatic Station Store) 1) Press the BND button @, then select the band you want to store in the memory. 2) Press and hold the AS button 9 for 2 seconds or longer, then the station at which the reception is the strongest will be automatically stored in the memory. 3) Press and hold the ISR button 6 for 2 seconds or longer. Recalling ISR Press the ISR button 6 then the display will show “ISR”, then the radio station previously memorized will be selected. Press the ISR button 6 again to disengage the unit from the Recalling ISR function. Area Change Use this function when you are using the car stereo anywhere outside the U.S. Switchable frequency spacing This car stereo is initially set to tune in frequency intervals of 10 kHz for AM and 200 kHz for FM, the standard calibrations in the U.S. When using the unit outside the U.S., use the following procedure to switch the frequency range. The table below lists the frequency specifications for the U.S. and other countries. Initial Setting New Setting (U.S. standard) (outside U.S.) 10 kHz 9 kHz Frequency range 530 to 1,710 kHz 531 to 1,629 kHz Frequency spacing 200 kHz 50 kHz Frequency range 87.9 to 107.9 MHz 87.5 to 108 MHz AM Note: • When the number of stations stored is less than six, the previous content of the memory for each direct button will be retained. Preset Scanning (Preset Station Scan) When the PS button 9 is pressed, the preset memory numbers flash and the stations are tuned in for 7 seconds each in the order in which they were stored. Press the PS button again to cancel the preset scanning mode. Instant Station Recall (ISR) With this function, a specific radio station can be recalled from any mode. ISR memory 1) Press the FNC button 3, then select the radio mode. 2) Select the radio station which you want to store in the memory. 12 Frequency spacing DRX5675 FM Switching the area change Outside U.S. (New Setting) While pressing the BND button @, press the SRCH Left button #, then “outside U.S.” will be selected. Inside U.S. standard (Initial Setting) While pressing the BND button @, press the SRCH Right button #, then the “U.S. standard” will be selected. CD Mode Operations Loading a Disc Insert the disc into the CD insertion slot with its label side up, then the CD will start playing. For 5-inch (12 cm) CD For 3-inch (8 cm) single CD Selecting Tracks (songs) Press the SRCH Left/Right button #. : Playback will start from the next track. : Playback will start from the beginning of the track currently playing. When this button is pressed again, the CD will play from the previous track. Fast-Forward and Fast-Backward * When inserting a single CD (3”(8 cm)), insert it from the center of the slot. * When inserting a single CD (3”(8 cm)), do not connect an adapter. * Pressing the SRCH Left/Right button for 1 second or longer will move forward or backward 5 times faster than normal play, and pressing it for 3 seconds or longer will do the operation 30 times faster. Scan Play (Intro Music Scan) Notes: Press the SCN button 9, then the display shows “SCN”, then the CD will play the first 10 seconds of each track of the whole disc. Press the SCN button 9 again to disengage the unit from scan play. • Some * A scan play will start from the track following the one * Press the DISP button 5, then the display will show the play time. • CDs recorded in CD-R mode may not be usable. Even when recorded in CD-R/W mode, some CDs may not be usable. currently playing. Repeat Play Press the FNC button 3 to select the CD mode, the CD will start playing. Press the RPT button 8, then the display shows “RPT”, then the track currently playing will be played repeatedly. Press the RPT button 8 again to disengage the unit from repeat play. Stopping (pausing) Playback Random Play Press the Play/Pause button %. Press the Play/Pause button % again to resume playback. Press the RDM button 7, then the display will show “RDM”, then the entire tracks on the disc will be played at random. Press the RDM button 7 again to disengage the unit from random play. Listening to the Disc already Inserted Ejecting the CD Press the Eject button 4, then the CD will be ejected. Note: • If the ejected CD is left as it is, it will be reloaded after 15 seconds. However, single CDs will not be reloaded, so make sure to remove them. Top Function Press the TOP button @, then the CD will start playing from the first song (track number 1). DRX5675 13 English Press and hold the SRCH Left/Right button #. : To fast-forward : To fast-backward CD Changer Mode Operations Listening to the Disc Press the FNC button 3 and select the CD changer mode, then the CD starts playing. Scan Play (Intro Music Scan) Press the SCN button 9, then the display shows “SCN”, then the CD will play the first 10 seconds of all the tracks of all CDs. Press the SCN button 9 again to disengage the unit from scan play. * A scan play will start from the track following the one currently playing. English Stopping (pausing) Playback Press the Play/Pause button %. Press the Play/Pause button % again to resume playback. Selection of CDs Press the Direct button (1 to 6) 0 then select the CD you wish to play. Top Function Press the TOP button @, then the CD will start playing from the first song (track number. 1). Selecting Tracks (songs) Disc scan play Press and hold the SCN button 9 for 2 seconds or longer, then the display will show “ ” and “SCN”, and plays the first 10 seconds of the first song of all the CDs in the CD changer. Press the SCN button 9 again to disengage the unit from disc play. * A scan play will start from the first tracks of next CDs following the one currently playing. Repeat Play Press the RPT button 8, then the display shows “RPT”, then the track currently playing will be played repeatedly. Press the RPT button 8 again to disengage the unit from repeat play. Press the SRCH Left/Right button #. : Playback will start from the next track. : Playback will start from the beginning of the track currently playing. When this button is pressed again, the CD will play from the previous track. Disc repeat play Press and hold the RPT button 8 for 2 seconds or longer, then the display shows both the “ ” and “RPT”, then the disc currently being played will be played repeatedly. Press the RPT button 8 again to disengage the unit from disc repeat play. Fast-Forward and Fast-Backward Random Play Press and hold the SRCH Left/Right button #. : To fast-forward : To fast-backward Press the RDM button 7, then the display will show “RDM”, then the entire tracks on the disc will be played at random. Press the RDM button 7 again to disengage the unit from disc random play. * Pressing the SRCH Left/Right button for 1 second or longer will move forward or backward 5 times faster than normal play, and pressing it for 3 seconds or longer will do the operation 30 times faster. 14 DRX5675 Disc random playback Press and hold the RDM button 7 for 2 seconds or longer, then the display will show both the “ ” and “RDM”, then the entire tracks of all the discs in the CD changer will be played at random. Press the RDM button 7 again to disengage the unit from disc play. Switching Magazine This function can be used only when the connected CD changer can store a multiple number of magazines. Every time the MAG button @ is pressed, the next magazine will be selected. English DRX5675 15 9. TROUBLESHOOTING Problem Cause Solution Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. Compact disc cannot be loaded. Another compact disc is already loaded. Eject the compact disc before loading the new one. Sound skips or is noisy. Compact disc is dirty. Clean the compact disc with a soft cloth. Compact disc is heaviiy scratched or warped. Replace with a compact disc with no scratches. Sound is bad directly after power is turned on. Water droplets may form on the internal lens when the car is parked in a humid place. Let dry for about 1 hour with the power on. Nothing happens when buttons are pressed. Display is not accurate. Microprocessor has malfunctioned due to noise, etc. Turn off the power, then press the DCP Release button 1 and remove the DCP. Press the reset button for about 2 seconds with a thin rod. Power does not turn on. (No sound is produced.) English Reset button DCP or source unit connectors are dirty. 16 DRX5675 Wipe the dirt off with a soft cloth moistened with cleaning alcohol. 10. ERROR DISPLAYS ■ To protect the system, this unit has been equipped with self diagnostic functions. If a fault arises, a warning is issued by various error displays. Follow the corrective measures and remove the fault. Error Display Corrective Measure This error display indicates that a fault has arisen in the mechanism of the source unit or CD changer (for example, the disc cannot be changed or ejected). ➜ Check the source unit and CD changer. English This error display indicates that the pickup focus is off because of a scratched disc or some other factor during source unit or CD changer play. ➜ Check the compact disc. This indicates that the CD’s TOC (table of contents) cannot be read, for example because the selected disc is upside-down. DRX5675 17 11. SPECIFICATIONS FM Tuner General Frequency Range: 87.9 MHz to 107.9 MHz Usable Sensitivity: 11 dBf 50 dB Quieting Sensitivity: 17 dBf Alternate Channel Selectivity: 75 dB Stereo Separation (1 kHz): 35 dB Frequency Response (±3 dB): 30 Hz to 15 kHz Power Supply Voltage: 14.4 V DC (10.8 V to 15.6 V allowable), negative ground Current Consumption: Less than 15 A Speaker Impedance: 4 Ω (4 Ω to 8 Ω allowable) Weight: 3.97 lb. (1.8 kg) Dimensions: 7” (178 mm) Width × 2” (50 mm) Height × 6” (152 mm) Depth AM Tuner CD Player System: Compact disc audio system Usable Discs: Compact disc Frequency Response: 10 Hz to 20 kHz (±1 dB) Signal-to-Noise Ratio: 96 dB (1 kHz) IHF-A Dynamic Range: 95 dB (1 kHz) 7” (178 mm) 2” (50 mm) 7-3/8” (188 mm) 2-1/4” (58 mm) 6” (152 mm) English Frequency Range: 530 kHz to 1,710 kHz Usable Sensitivity: 25 µV Notes: Audio Maximum Power Output: 180 W (45 W × 4 ch) Continuous Average Power Output: 14 W × 4, into 4 Ω, 20 Hz to 20 kHz,1%THD Bass Control Action (100 Hz): ±10 dB Treble Control Action (10 kHz): ±10 dB Line Output (with A/C 1 kHz, 10 kΩ): 1.8 V 18 DRX5675 • Specifications comply with EIA Standards. • Specifications and design are subject to change without notice for further improvement.