AC Power
For Business-Critical Continuity™
Liebert ® Power Solutions
IT System Protection That Grows With Your Needs
A Comprehensive Power Solution—We’re The Only One Who Has It
The Widest Range Of Products Gives You An Infinite Range Of Solutions
It All Starts With Rack Systems
­­Critical Electrical Distribution
Liebert and Knurr brand computer rack systems offer all
Emerson Network Power offers a range of power distribution
the advanced features and innovative flexibility required to
systems designed to efficiently deliver conditioned power to
accommodate today’s dense and complex IT systems and
your critical equipment. These products include high-reliability
network gear.
distribution systems, starting with rack power distribution
Knurr racks simplify equipment installation, improve cable
management and increase visibility and control of equipment
inside the rack.
Liebert enclosures integrate power and cooling to provide
a complete rack-based support system. Liebert pioneered
this approach with the Little Glass House and today provides
enclosures, such as the Liebert MCR and Liebert XDF, which
protect sensitive electronics in almost any environment.
systems, specially designed for computer and communications
applications, as well as transfer switches offering ultra-fast
transfer between two independent AC power sources to
provide virtually uninterrupted power to sensitive electronic
equipment.
Power Quality Protection
For applications requiring protection from electrical line
disturbances without the need for back-up capability, Emerson
manufactures a full line of power conditioning equipment. It
UPS Systems
includes a wide variety of transient voltage surge suppression
Emerson Network Power offers Liebert brand UPS in all
(TVSS) solutions ranging from high-quality surge suppressors
three major uninterruptible power supply (UPS) system
for use with PCs, workstations and other peripherals to
configurations:
facility-wide systems with sophisticated active tracking
Stand-by UPS—Passes utility power straight through to
the protected load with a 2-6 ms break in power when
transferring to battery back-up.
Line-Interactive UPS—Provides power conditioning with
a 2-6 ms break in power when transferring to battery
back-up.
capability.
DC Power Systems For Communications Applications
From major switching centers to remote shelters, Emerson
DC power systems offer performance and features to match
virtually every telecommunications equipment application.
The line includes a variety of system capacities ranging from
small systems at less than 3 kW up to large systems rated at
On-Line (Double Conversion) UPS—Delivers continuous,
over 60 kW. The product offering also includes distribution
high-quality AC power to equipment with no break when
transferring to battery. Protects equipment from virtually
all power disturbances due to blackouts, brownouts, sags,
surges or noise interference.
bays, enclosures and network management products such as
Emerson Network Power offers UPS systems in the industry’s
Liebert brand power communications software and hardware
widest range of sizes including desktop, rack-mount and
provides multiple levels of monitoring and control. Capabilities
enterprise systems for full facility power.
range from automated shutdown software to facility-wide
controllers, monitors and supervisory software to control and
maintain energy equipment in a telecommunications network.
Power System Monitoring
centralized systems that provide a full range of monitoring,
control and analysis.
2
1
Racks, Integrated Cabinets, Modular Power Distribution
10
Knurr Rack Enclosure System
11
Liebert MCR Mini Computer Room Enclosure
12-13
Smart Solutions
14-15
Liebert MB Modular Busway
2
Rack PDU
16
Liebert MPX Adaptive Rack PDU
17
Liebert MPH Managed Rack PDU
18
Liebert MPX And Liebert MPH
19
Knurr DI-STRIP, Basic Rack PDU
3
Desktop UPS
20
Liebert PSP Stand-by UPS: 350-650 VA
21
Liebert PSA Line-Interactice UPS 500 – 1500 VA
4
Rack-Mount UPS
22-23
Liebert PSI And PSI-XR Line-interactive UPS: 750-3000 VA
24
Liebert GXT3 On-line UPS: 500-3000 VA
25
Liebert GXT3 On-line UPS: 5 - 10 kVA
5
Enterprise UPS
26
Liebert Nfinity On-line UPS: 4-20 kVA
27
Liebert NX On-line UPS: 10-30 kVA
28-29
Liebert NX On-line UPS: 40-200 kVA
30-31
Liebert APM On-line UPS: 15-90 kVA
Point-Of-Sale
Desktops / Peripherals
Emergency Shelters
Telecom / CATV
Labs & Testing
Production
Network Closets
Data Centers
CONTENTS
Computer Rooms
There Is A Liebert Power Solution
To Meet Every Need
For One-On-One Applications
For Distributed Network Applications
For Computer Room And Data Center Applications
32-33
Liebert Npower On-line UPS: 30-130 kVA
34-35
Liebert NXL On-Line UPS: 250-750 kVA
36-37
Liebert Series 610 On-line UPS: 225-1000 kVA
38-39
Liebert Trinergy On-line UPS: 400kVA - 3.2MVA
6
Power Distribution Systems For Critical Protection Applications
40
Liebert FDC Power Distribution Cabinet
41
Liebert RDC Remote Distribution Cabinet (RDC)
42
Liebert FPC Power Conditioning & Distribution Cabinet
43
Liebert PPC Conditioning And Distribution Cabinet
44
Liebert STS2 Static Transfer Switch2 (STS2)
45
Liebert STS2/PDU Static Transfer Switch/Power Distribution Unit
46-47
Liebert Power Systems Test Center
7
Surge Protection And Power Conditioning Systems
48-49
High Exposure Systems, Low & Medium Exposure Systems,
Home & Office Protection, and Data/Signal Line Protection
8
DC Power Systems For Telecommunications Applications
50-51
Small Power, Medium Power, Large Power, Inverter Systems, Batteries & Accessories
9
Monitoring And Control
52-53
Liebert IntelliSlot, Liebert Nform & Liebert SiteScan Web
54-55
Liebert Services
3
Trouble Is Coming Down The Power Line And You Must Be Prepared
Every operation in your business depends upon the instant,
around-the-clock availability of computers, servers and other
You Face Many Challenges In The
Pursuit Of Productivity
electronic systems. If they aren’t working, neither is your company.
Unfortunately, every piece of this equipment your company
possesses is subject to the whims of the electricity that powers it.
Is There Really A Problem?
“My computer can ride right through a short blip
in the power—why do I need anything else?”
The first step in taking control of this situation is to understand the threats
to your system reliability—and exactly what you can do about them.
Different Needs Require Different Power
Protection Configurations
“Should I have a small UPS for each workstation
or have everything on one large system.
Which is best for my facility?”
A Lot Can Happen Between Your UPS
And The Equipment It Is Protecting
“We have dozens of pieces of networking equipment.
How can I make sure that each one is getting exactly
the power it needs?”
Every Wire Carries The Potential
For Trouble
“An electrical surge came in through an outside
phone line and knocked out our entire communications
system. Is this going to happen again?”
A Single Source Of Power Simply
May Not Be Enough
“Adding a second power feed would certainly enhance
our availability picture—but who can we talk to about
getting it done right?”
You Need Efficiency... Without
Compromising Availability
“Budgets are tight, so I have to consider equipment costs
at all lifecycle phases — first cost, operation, and service.
How do I maximize efficiency and ensure reliability?”
4
But There Are Real Solutions
You Need Protection From All Power Problems
An outage is just the problem you can see. There are many other more frequent power fluctuations—surges, spikes, sags—
that you don’t see. These are the conditions that cause the “unexplained” lock-ups and other potentially damaging results.
Protecting critical network and computing systems requires the expertise of someone who understands all the risks you
face from poor power quality.
Centralized Vs. Distributed UPS Protection
Liebert has the breadth of products that allows you to implement either a centralized or a one-on-one distributed
power protection strategy depending on your requirements. Whatever configuration you choose, you can count
on Liebert to make it the best it can be. Benefits, such as increased system security, more efficient maintenance and
improved reliability, may make a centralized strategy a better choice for larger operations.
Proper Power Depends On Proper Distribution
In network applications, there may be hundreds of different loads with various voltage requirements, a mix of AC and DC
power, plus any number of other electrical specifications. This calls for a distribution system that is designed to maintain the
highest levels of reliability and quality between the source of conditioned power and the protected equipment.
Power Conditioning And Surge Protection Throughout The Facility
Power conditioning and surge suppression systems are key to maintaining power quality in critical facilities. Raw utility
power is often far too “dirty” for sensitive systems, resulting in lost or garbled data, unexpected software glitches
or shutdowns, even hardware damage. The IEEE recommended practice is to install transient voltage surge suppression
(TVSS) protection on every electrical conductor that penetrates a facility shell, including power lines, telephone and
other communications links.
Maximum Reliability Demands Dual Power Sources
If your needs require the highest level of system availability, Liebert has the knowledge and products to implement a
dual-power strategy throughout your enterprise. UPS, transfer switching, power distribution and other equipment
are all brought together to create the ultimate in reliability.
Optimize Data Center Infrastructure With Efficient, High Availability Technologies
Emerson Network Power delivers Efficiency Without Compromise® — technologies and products that optimize data
center infrastructure to reduce design, management and energy costs while maintaining high availability and flexibility.
Our industry-leading technologies optimize efficiencies and reliability in identified areas of opportunity: Infrastructure
Management; Eco Availability; Flex Capacity; and High Density.
5
Where Do You Need Mission-Critical Power Protection Technology?
Computer
Systems
Health Care
Retail
Biotechnology
Industry
Distribution
Industrial
Government
We have efficient, high availability
Liebert has identified ten distinct zones or areas of application, found
power solutions for any of the
within many business operations, which have a requirement for
applications that are part of your
mission-critical business operations.
mission-critical power technology. While these zones have similarities
in the importance of their essential functions, they also have
different needs for infrastructure protection—all of which can be met
by Liebert solutions.
Large Data Centers—High
Production—Smart factories
Emergency Shelters—Emergency
availability data and network
backed by a complex electronic
operations centers, 911 response
applications are the heart of your
network, from computer-con-
emergency dispatch, police and fire
enterprise with blade servers and
trolled machinery and processes
facilities, medical facilities, public
high-density racks that demand
to electronic sensors, business
works operations and more.
increased power protection.
systems and utility equipment.
Small To Mid-Size Data Centers—
Laboratories and Testing—
small office computers, modems,
Smaller sized network and
Sensitive computers and
network components and other
computer facilities, but equally
equipment used for diagnosing
electronic equipment that is vital
essential to your operations.
patients, analyzing data,
to business operations.
Network Closets—Housing
routers, switches, modems, cabling
devices and numerous other
communications components.
Network Operations Centers—
As networks expand and grow
more complex, you need reliable
and timely access to
mission-critical infrastructure
monitoring information long before problems arise.
6
performing critical tests, and
operating electronic tools and lab instruments.
Desktop/Peripherals—Home and
Point-of-Sale—Today’s cash
registers and store-level computer
networks not only handle sales
Telecom/CATV—Anything from
transactions, they also collect
indoor and outdoor spaces hosting
and transmit vital customer and
cable, DSL and fiber optics to
inventory data required to make
remote cell sites and enclosures.
informed supply chain decisions.
Telecom Wireline/Wireless Sites
Liebert can provide a reliable flow
of both AC and DC power for
telephone switching systems and
other communications equipment.
UPStation
GXT
+
AC
INPUT
BATTERY
UPS
ON
BYPASS
UPStation
GXT
+
AC
INPUT
BATTERY
UPS
ON
BYPASS
UPStation
GXT
+
AC
INPUT
BATTERY
UPS
ONBYPASS
UPStation
GXT
+
AC
INPUT
BATTERY
UPS
ONBYPASS
Emergency Shelters
High-reliability Liebert UPS systems and DC
power equipment are critical to maintaining
operations in telecommunications shelters
and other unmanned structures.
Network Operations
Centers
With many mission-critical
computing systems located
right in the office space,
there is a need for UPS
protection that can be
placed nearby. Liebert offers
a number of power systems
that are especially designed
for use in business and office
environments.
Network Closets
These densely-packed equipment
bays, housing servers or other
essential communications devices
require UPS back-up plus distribution
to get uninterrupted, conditioned
power to each and every component
in the rack.
UPStation
GXT
+
AC
INPUT
BATTERY
UPS
ONBYPASS
UPStation
GXT
+
AC
INPUT
BATTERY
UPS
ONBYPASS
Small to mid-size Data Center
Liebert offers the full range
of UPS, distribution systems
and other power protection
equipment that can adapt
to data center growth
requirements.
UPStation
GXT
+
AC
INPUT
BATTERY
UPS
ON
BYPASS
UPStation
GXT
+
AC
INPUT
BATTERY
UPS
ON
BYPASS
Production
Data Center
Liebert offers the full
range of UPS, distribution
systems and other power
protection equipment
to meet the needs of the
largest data centers and
networking facilities.
Liebert UPS, surge protection and power
distribution are all key to maintaining the
proper operation of process control and
other manufacturing systems that utilize
microprocessor and computer control.
UPStation
GXT
+
AC
INPUT
BATTERY
UPS
ON
BYPASS
UPStation
GXT
+
AC
INPUT
BATTERY
UPS
ON
BYPASS
UPStation
GXT
+
AC
INPUT
BATTERY
UPS
ON
BYPASS
UPStation
GXT
+
AC
INPUT
BATTERY
UPS
ON
BYPASS
UPStation
GXT
+
AC
INPUT
BATTERY
UPS
ON
BYPASS
UPStation
GXT
+
AC
INPUT
BATTERY
UPS
ON
BYPASS
UPStation
GXT
+
AC
INPUT
BATTERY
UPS
ON
BYPASS
Mechanical Rooms
Liebert power protection and conditioning
systems can greatly improve the operation
of electrical switchgear and motor control
centers vital to numerous functions
throughout an industrial facility.
7
Efficiency Without Compromise ®
Design, Operation, Management And Planning
Optimized For Efficiency And High Availability.
Expert Advice
INFRASTRUCTURE
MANAGEMENT
Improving performance of
the IT infrastructure and
environment
C
ritical infrastructure expertise enables highly
efficient and effective designs.
A
ssessments identify power and cooling
improvements that provide immediate and
ongoing cost savings.
Areas of Opportunity
Uninterruptible Power
ECO AVAILABILITY
Balancing high levels of
availability and efficiency
Liebert NX and Liebert NXL deliver highly reliable
on-line UPS protection while providing efficiencies
of up to 94% at part load and up to 97% at full load.
When operating on Eco-Mode, the always-on
inverter ensures high availability and seamlessly
assumes the load in case of a utility power
disturbance.
Variable Air Flow
FLEX CAPACITY
Adapting to IT changes for
continuous optimization
and design flexibility
L iebert CW with VSD reduces energy consumption
by 50% at 80% speed, saving up to$5,000/year/
unit and providing a <2 year payback.
L iebert CW with EC Fans reduces energy
consumption by up to 30% at full speed and
65% at 80% speed.
High Density Cooling
HIGH DENSITY
Delivering architectures
from 10-60 kW/Rack to
minimize space and cost
8
L iebert XD can cool densities of >30 kW/Rack
and is up to 30% more efficient than traditional
cooling systems.
L iebert XD uses pumped refrigerant and
dewpoint control to prevent condensation.
Design &
Deployment
Shorten Time
Minimize Space
Management
& Planning
Improve Performance
Increase Control
Management Tools & Technologies
Integration & Operation Services
IT,
rack, row and room sensor networks provide
management and control of temp, humidity,
pressure, power, water detection, capacity,
and battery health.
Implementation and commissioning services
ensure rapid deployment.
C
entralized real-time monitoring reduces
downtime and management.
Standards-based interface with Building Management
System bridges IT and facility management.
Economization
F luid economizers enable “free cooling”
while controlling temperature, humidity, and
preventing contamination.
L iebert Glycool safely uses outside temperatures
to reduce cooling system compressor runtime,
saving up to 25% of energy cost.
Variable Capacity
E nterprise remote monitoring enables proactive
management.
Critical Services
P
reventive maintenance optimizes
the lifetime value of equipment.
F acility Power Audits maximize efficiency
and availability.
Battery
monitoring and service maximizes
performance, life, and availability.
Intelligent Control
Liebert
DS is the only data center cooling
system to use variable capacity Digital Scroll
compressors.
L iebert iCOM with predictive control and
teamwork saves up to 7% energy consumption
over traditional controls.
V
ariable capacity compressors reduce energy
consumption by up to 30% on an air cooled
system, saving up to $5,000/yr/unit.
M
anages “zones” including non-homogeneous
heat loads, contained areas, and localized
high density areas for optimized cooling
performance.
Intelligent Aisle Containment
S
martAisle by Emerson Network Power
eliminates temperature stratification and
excess airflow at IT equipment source.
E asily retrofitted with existing cooling
infrastructure for up to 30% efficiency and
up to 25% capacity improvements.
Operation
Increase Availability
Reduce Energy
With more ways
to optimize
data center
infrastructure to
reduce design,
management
and energy
costs while
maintaining
high availability
and flexibility,
Emerson Network
Power delivers...
Efficiency
Without
Compromise
Power Architecture
Liebert
and Knurr rack PDUs are available
in configurations up to 60 amp, with
an industry-leading standard operating
temperature of up to 131°F, for reliable
support of high density racks.
S
tandard TP-1 transformers in PDUs provide
up to 98.7% efficiency.
9
Knurr Racks And Cabinets
The Right Place To
Protect Network
Equipment
The Knurr DCM enclosure is a new
platform from Emerson Network
Power that lets facility managers
and IT professionals manage server,
switch, and termination applications.
Knurr DCM was designed as the
base element for all of Emerson
Network Power’s row and rack
solutions and is compatible with all
Liebert Power and Liebert Precision
Cooling products. The Knurr DCM
offers all the advanced features and
innovative flexibility required to
accommodate today’s dense and
complex IT systems and network
gear.
Knurr DCM simplifies equipment
installation, improves cable
management, and increases
visibility and control of equipment
inside the rack. The rack easily
integrates power, cooling, and
monitoring systems to provide a
complete support system.
Knurr Racks Are Ideally
Suited For:
n
Data centers.
n
Network closets.
n
Telecommunication equipment.
Ready-To-Deploy Rack And
Enclosure Solutions.
Knurr DCM racks provide the
convenience of robust 19” racks
with high-end features and
standardized options to provide
fast customization for individual
site needs. The racks are designed
for optimized air flow and
maximized useful mounting space.
Tool-Less Shelf
Mounts In
Square Holes
On 19” Rails In
Seconds
Tool-Less
Cable
Management
on Frame
Insert And 1/4
Turn, Installs In
A Second
Doors Open to
135˚
Allows Easy
Access To
Cabinet,
Without
Removing The
Door
Lightweight
Aluminum
Frame
Makes The
Cabinet Easier
For A Single
Person To Move
Low Profile
Casters
Allows 42U
Cabinet To
Roll Through
Standard
Doorway
10
83% Open Area For Improved
Airflow, Highest In
The Industry
Roof Pre-Drilled
For XDV
Accepts XDV
With No Need For
Drilling
Spring Nut In T-Slot
Allows Component
Mounting
Anywhere In
Cabinet Frame
Liebert MCR
Mini Computer Room Enclosure
Liebert IP Telephony
Availability System
Liebert has brought together several of
our product solutions to create the IP
Telephony Availability System. Especially
designed to protect switches, routers and
other critical components, this solution is
ideal for use in remote locations such as
branch offices, retail stores and other edge
of the network applications. Housed in a
Liebert Foundation™ wall mount enclosure
or freestanding enclosure.
Secure Door
lockable door
provides an extra
measure of security
by limiting access
to critical
equipment
The Liebert IP Telephony Availability System, version 1.0, has
met the Cisco Technology Developer Partner Program test
criteria for interoperability with Cisco CallManager Express
3.1, Cisco Unity Express, release 1.1.2, Cisco Unity 4.0 (3), and
Unity Bridge 3.0 (2).
BCM
(Back-up Cooling
Module)
True On-Line Power Protection
Sealed Door
specially designed
rubber gasket
provides NEMA12
sealing protection
The Liebert GXT3, a true double conversion
UPS, delivers the high level power quality
required to fully protect critical network
switching components from all power
problems. Available in sizes from 500 up
to 3000 VA.
Liebert GXT3 on-line UPS
ECM
(Environmental
Control Module)
Bundled UPS
systems available
Dual-Split Rear
Door available
Continuous Power Availability
Wall Mount
Systems 12 U
Hinge Body “swing
out” and 12” depth
Low Profile available.
EX Cable
Management
Channel
This versatile
option helps to
enhance cabling
organization and
internal airflow.
Liebert MCR
Enclosure
For smaller spaces
requiring the
complete power
and cooling
protection.
Internal Power
Distribution
A wide range
of installed power
strips is available to
better accommodate
power distribution
needs within the
enclosure.
In most cases, your critical routers and
other network components cannot be
without power even for scheduled UPS
maintenance. To meet this need, the
Liebert 2U Power Output Distribution (POD)
system ensures continuous uptime by
providing maintenance bypass capability
as well as power output distribution.
Power System Monitoring,
Communications & Remote Control
The Liebert Webcard,
housed within the UPS,
will deliver SNMP and
web-management communications
capabilities to your power system, including
the ability to remotely reboot the switch by
cycling the UPS power off and on.
11
Racks, Integrated Cabinets
Protecting The Edge
Of The Network
Smart Solutions Deliver Efficiency, Capacity,
Availability, Control
To help you achieve efficiency in all aspects of your data
center, Emerson Network Power has developed the Smart
Solutions intelligent, integrated infrastructure for data
centers. The family uses a global design approach that can be
localized for specific geographies.
Smart Solutions let you cost-effectively achieve and manage
your objectives for efficiency, capacity and availability. These
offerings provide fast and easy implementation, through
interoperable systems: precision cooling, UPS, power
distribution/conditioning, management software and racks.
No other solution offers the industry’s leading power,
precision cooling and data center infrastructure management
systems for such a wide array of applications and
environments.
Smart Solutions are fast and easy to implement, and are
supported by local data center design experts and service
professionals. Smart Solutions are typically more affordable
than conventional data center designs – and they are more
energy efficient.
Each Smart Solution offering integrates industry best
practices in data center design and operations including:
Hot air and cold air separation
Cold air containment
High availability and high efficiency UPS
High-efficiency precision cooling
Space-savings, small-footprint
Modularity for flexibility and easier expansion
Integrated monitoring and control to optimize efficiency in
planning and management
Unique local service for design audits, configuration
support, installation support, maintenance and repair
Emerson Network Power brings together the industry’s finest
power, precision cooling, monitoring and management
brands and businesses, including Liebert, Knurr, ASCO,
Avocent, Chloride, Energy Systems and Surge Protection
solutions. The Smart Solutions offerings deliver Efficiency
Without Compromise™ within the data center.
12
Smart Solutions give you the efficiency, economy,
interoperability and control to implement an
infrastructure strategy that outperforms any
you’ve ever seen.
Efficient
Up to 28% in energy savings
Increase rack density up to 60%
Economical
Reduce implementation costs compared to
conventional data center approaches
Interoperable
Maximize use of existing infrastructure
Depending on the solution, you can have a
complete infrastructure in just weeks
Controllable
Easily enforce add / change policies
Speed IT administration request response times
by up to 30%
SmartRow™
Intelligent, integrated
infrastructure
in a self-contained line-up
Capacity: 20kW
Racks: 3-6
Type: Self-contained
Floor: Primarily non-raised
Key Applications: Small data
centers; remote sites; disaster
recovery
The SmartRow™ solution has a room
neutral design that lets you avoid many
of the significant costs that come with a
conventional data center buildout.
Favorable implementation costs
compared to using a conventional data
center approach, due to savings from
integrated fire suppression and ability
to work in an existing non-raised floor
environment without dedicated room
cooling.
Smart Solutions
Reduce energy consumption by up to
27% compared to a data center with
conventional design, perform less
maintenance and reduce the costs of
adding new equipment.
Order and install in just weeks.
SmartMod™
Intelligent, integrated
infrastructure in a rapid
deployment enclosure.
Capacity: 30-400kW
Racks: 6-28
Type: Self-contained
Floor: N/A
Key Applications: Supplemental
data center capacity; remote
data centers; disaster recovery
The SmartMod™ enclosure lets you save
on upfront design and implementation
by delivering fully integrated power,
precision cooling, integrated fire
suppression and management systems in
a modular, standalone design.
Rapidly deploy a comprehensive data
center infrastructure solution.
Implement a stand-alone solution
that won’t burden the existing
infrastructure.
Save on design, equipment purchase
and installation.
Order and install in just months.
Reduce energy consumption by up to
28% compared to a data center with
conventional design.
SmartAisle™
Intelligent, integrated
infrastructure using
row-based building blocks.
Capacity:Most cost effective
up to 400kW
The SmartAisle™ offering can increase
your efficiency through row-based power
and precision cooling systems.
Save up to 27% in energy costs
Racks: Most cost-effective
up to 40
Keep infrastructure on pace with
equipment changes, with systems that
operate together and can be quickly
reconfigured
Type: Open or aisle
containment available
Increase capacity without replacing old
infrastructure.
Floor: Raised, non-raised
Key Applications: Small and
medium data centers; highdensity zones in all data centers;
new or retrofit
13
Liebert MB Modular Busway:
Flexible, Economical Power Delivery From PDU To Rack
Emerson Network Power brings you the most flexible, robust power
distribution system on the market today: Liebert MB Modular Busway.
Modeled on the Siemens XJ-L busway, Liebert MB provides flexible
modular power distribution in high tech environments. Power cables
are replaced. Installation is simplified. Each rack has a clearly identified
breaker. Air flows freely. Installation and ongoing costs are reduced.
And the solution is organized and easy to maintain.
Liebert MB is a convenient, economical way to provide power from a
room power distribution unit to the IT rack equipment. This compact,
modular system is an organized alternative to custom cabling, and is a
perfect solution for dynamic data centers that require frequent updates
and changes with little to no power disruptions.
System Compatibility
Liebert MB is compatible with the Knurr DCM rack and the entire family
of Liebert power products — rack and room PDUs, UPS systems and
surge protective devices — providing power distribution and protection.
Ideally Suited For:
Large or medium data centers.
Data centers with variable and dynamic loads.
High power density applications.
Single or dual bus configurations.
Liebert MB Features:
Comprehensive offering of standard fittings.
Reconfigure to meet growing and changing IT demands.
Lightweight and flexible for easy installation, but rugged
enough for durability.
15-30% lower cost than typical cabling materials and
labor/installation costs.
UL 857 and CSA 22.2 agency ratings for safety.
100A, 225A and 400A availability.
Hot swappable, user replaceable bus plugs provide both
flexibility and maximum safety.
Bus plug capacities from 30A to 100A.
Pre-assembled bus plugs with whips or receptacles.
Multiple bus plug port spacing available.
Liebert Power Monitoring Capabilities
Rack-mount, ceiling suspended or underfloor mounting options.
The operation of Liebert MB can be monitored using:
Liebert SiteScan® Web Centralized Monitoring System.
Optional metering at bus plugs or tap box.
14
For more information, see pages 52 and 53.
Liebert
NX UPS
Liebert
Tap Box NX BDC
Liebert MB
Modular Busway
Knurr Rack
Modular Power Distribution
Liebert NX
Battery Cabinet
Bus Plug
Liebert MPX Rack PDU
15
Liebert MPX - Adaptive Rack PDU:
Respond To Change While
Watching Your Bottom Line
Confidently take on the uncertain future of connected power
requirements with Liebert MPX, the most responsive and adaptive
rack PDU available. With Liebert MPX adaptive technology, you
can economically increase availability of critical systems by
leveraging hot-swappable modular power and managing power
all the way to the receptacle level.
Liebert MPX Benefits:
Adaptive capacity, distribution, monitoring,
control and management of critical devices.
Flexibility to respond to constant change.
Buy only what you need and build on your investment.
Secure communication.
Reconfigurable Power Capacity
& Distribution
Liebert MPX is the perfect choice to respond to the needs
Scalable Design Allows
Onsite Configuration
To Fit Immediate IT
Equipment Needs.
The Liebert MPX Adaptive
Rack PDU features essential
characteristics to support
fast-paced, growing data centers.
Hot Swappable Output Power
Deploy easily to get IT equipment
online quickly
Receptacles & Modules
May be remotely controlled and
metered, providing operator
flexibility and allowing increased
site security
of a growing data center. Relocate or add IT equipment to
support changing needs, by easily reconfiguring the power
input and distribution.
Liebert MPX Features:
Industry leading operating temperature—up to 55˚C /131˚F
to support hot Internal rack environments.
Accurate power metering of +/-1% voltage & current
for assured oversight.
Energy and power metering down to the
individual receptacle.
Comprehensive alarming including notification of
overloaded branch circuits.
Environmental sensing with threshold and alarm set-points.
Notification on the loss or removal of individual rack
equipment loads.
IP consolodation via Rack PDU Array™
Rack PDU Card (Liebert RPC)
Mounts in the Power Entry
Module and provides
upgradable network
communications, sensor
and local display interface
Input Power
May be reconfigured to
support changing power
needs, single and three
phase input.
Can be positioned for top
or bottom rack entrance.
Liebert Power Monitoring Capabilities
The operation of Liebert MPX
can be monitored using:
Liebert RPC Rack PDU Card.
- Liebert Nform Monitoring System.
- L iebert SiteScan® Web Centralized
Monitoring System.
- Secure Web/SNMP Interfaces.
- L iebert RPC-BDM Local
Display Module.
For more information, see page 18.
16
Liebert MPH—Managed Rack PDU:
Advanced Monitoring And Control Support
Liebert MPH is a flexible Rack PDU solution with remote
input options. It offers multiple power input selections
and output configurations in both vertical zero-U and
rackmount form factors. Up to four Liebert MPH PDUs may
be interconnected as a Rack PDU Array™, consolidating user
IP connections and device monitoring.
Liebert MPH Monitoring
And Control Support
Monitored electrical parameters include: voltage,
current, total real power (watt), and energy
consumption (kW-hr). Capacity based current
thresholds provide comprehensive alarm
notifications from the Rack PDU and branch.
Liebert MPH Features:
Rack PDU
monitoring and control capabilities as well as environmental
Rack PDU Card
(Liebert RPC)
Provides upgradable
network communications,
sensor and local display
interface
Monitors electrical and
environmental parameters with
set threshold and alarm tools.
Industry leading operating
temperature—up to 55˚C/131˚F
to support hot internal rack
environments.
Controls and manages individual
receptacles.
Predicts overcurrent conditions
before they become critical.
Remote monitoring at strip
and branch.
Card-based communications.
Local displays are easily located
to suit a crowded and changing
rack environment.
Supports mounting in 19” EIA,
42U rack environments—offered
in vertical, zero U and rackmount
form factors.
Allows you to predict failing
conditions before they occur and
proactively manage connected
equipment for maximum uptime.
Liebert Power Monitoring Capabilities
The operation of Liebert MPH
can be monitored using:
Liebert RPC Rack PDU Card.
- Liebert Nform Monitoring System.
- Liebert SiteScan® Web Centralized
Monitoring System.
- Secure Web/SNMP Interfaces.
- Liebert RPC-BDM Local
Display Module.
For more information, see page 18.
Branch Overload
Protection
Flexible Power Cord Mount
User adjustable for horizontal or vertical
orientations
17
Liebert MPX and Liebert MPH:
Enhanced Performance And Management
Of Dynamic IT Spaces
IT Space Is A Dynamic Environment
Today’s successful businesses depend on
adaptable technologies to help them respond
quickly to market demands. Your data center
must be built on a support infrastructure
designed to match the power and cooling
needs of rapidly changing IT initiatives such
as virtualization and consolidation. Each
IT change, move or addition will affect the
entire support infrastructure. You need
products and support that ensure your
IT systems will operate reliably in these
environments.
M
structure anagement
Infra
Remote Monitoring
Alarm notification
Remote Control
Emerson Network Power’s portfolio of
products from brands such as Liebert,
Knurr, Alber, Aperture, and ASCO provide
innovative, flexible solutions that ensure
reliability and efficiency. With the help of
monitoring and management tools from
Emerson Network Power, the result is
an infrastructure that will enable you to
proactively manage your critical IT spaces.
The Rack PDU family of products is the
connectivity point of IT systems into
your power and cooling infrastructure
and the critical interface to an efficient
and effective infrastructure management
ecosystem.
Monitoring Anywhere You Need It
From the individual receptacle of
each discrete device to the complete
rack PDU, monitoring is available
to meet user needs. Displays are
designed for easy user location to fit
changing site needs.
Display and sensors are designed
for easy mounting on the rack.
A single display can manage up
to four Liebert MPX or Liebert
MPH systems and associated
monitoring accessories. Liebert
MPX and Liebert MPH include
the following capabilities:
Web-based monitoring.
Liebert Nform IT based.
centralized monitoring.
Liebert SiteScan centralized
monitoring.
User located local display with
the ability to view up to four
PDU’s.
Liebert SN rack sensors.
Capacity planning
Asset management
Expert services
Surge
Protection
Cooling
Power
Heat
UPS
Liebert MPX may be remotely
monitored and controlled via secure
web/SNMP interfaces or Liebert
Nform or Liebert SiteScan Web.
PDU
Pow
er & C
oo
e
ctur
ling Infrastru
Liebert RPC
(Rack PDU Card)
Network
Rack PDU Array
(up to four systems)
Environmental
Sensors
Web Monitoring
18
Liebert Nform
Liebert SiteScan
Web
RPC-BDM
(Local Display Module)
Status Display (RPC-BDM)
is easily moved to the most
convenient spot for the individual
rack—even outside the rack. This
tethered display may be located for
user convenience.
Knurr DI-STRIP: Basic Rack PDU,
Standard And HighPower Systems
selecting robust, economical and flexible rack power solutions.
Knurr DI-STRIP® meets a broad range of power distribution requirements for IT and
other applications. Designed especially to handle the growing number of electronic
components that can be housed within network cabinets and server racks, the
Knurr DI-STRIP Features:
Rack PDU
Knurr Basic Rack PDU is the right answer for data center users
ultiple configurations and input power options
M
available including international compatibility.
he addition of the Basic Rack PDU Expansion
T
Unit allows for growth.
space saving product line is available with a range of accessories including circuit
0ft. (3m) power supply cable offers room
1
for movement.
breakers, overvoltage protection and more.
Reliable and robust solution.
Worldwide approvals and certification.
F ull-length brass busbar on Standard models
enhances operational reliability.
tandard system extruded casing and a HighPower
S
system heavy duty casing provide durability.
I ndustry leading operating temperature—up to
55˚C/131˚F to support hot internal rack environments.
imple and quick installation on the rack’s extrusion
S
requires minimal space and reduces installation time.
Flexibility to meet
a broad range of
requirements
19
Liebert PSP Stand-by UPS:
350 - 650VA, 1-Phase
Protection For
Desktop And
Small Network
Applications
The PowerSure PSP from Liebert is a compact, full featured
more than enough time to save work in process and shut
Up to five minutes of battery
backup at full load.
Liebert desktop power solutions are
down your system.
User replaceable batteries.
Perfect for desktop applications, the PowerSure PSP
provides one-on-one power protection for PCs and
other sensitive electronic equipment. Two models
available: 350 and 500VA at 120VAC and 500 and
650VA at 230 VAC.
RJ-45 port for data line
surge protection.
designed for applications where one
or a few pieces of equipment require
surge suppression or basic power
protection with battery back-up.
One-On-One Protection
The Liebert family of products
includes surge protection strips
and line-interactive UPS to give
you a real choice in desktop and
network component protection.
Liebert Products Offer
One-On-One Power
Protection Solutions For:
Home And Small Office UPS that delivers cost-effective power protection. Designed
with simple controls for easy operation, the PowerSure PSP
provides over four minutes of battery back-up at full load —
Stand-by UPS
TVSS &
EMI/RFI
Filters
Desktop PCs.
Network Routers, Bridges And Hubs.
Point-of-Sale Terminals.
Other Sensitive Electronics.
Liebert Power Monitoring
Capabilities
The operation of the Liebert PSP
can be monitored using:
Liebert MultiLink® Automated System Shutdown Software.
For more information, see pages 52 and 53.
20
Load
Battery
Network Workstations.
Inverter
Three battery-backed UPS outlets.
One surge protection-only outlet.
Advance early warning of
UPS shutdown.
For maximum flexibility, a choice of communications
options are available — USB, serial or contact closure. This
option solves the legacy systems dilemma of what to do
with equipment that does not have USB capabilities. A
MultiLink™ automated shutdown software CD, serial
communications cable and USB cable are also included.
Source
Liebert PSP Features:
USB port, Liebert MultiLink
Software shutdown software
and USB cable.
Two-year replacement warranty.
Liebert PSA Line-Interactive UPS:
500 – 1500 VA, 1-Phase
Liebert PSA is an economical
line-interactive UPS that offers
full-featured power protection for
small office computers and electronic
equipment. It is available in the
following sizes: 500, 650, 1000 and
1500 VA at 120 VAC or 230 VAC.
Designed with simple controls
for easy operation, the Liebert
PSA provides up to five minutes
of back-up time at full load –
more than enough time to save
work in process and shut down
your connected equipment.
USB shutdown software and
a USB cable are also included,
to allow remote alerts and
automated graceful shutdown of
the connected systems. Liebert
PSA offers unique features and
extraordinary performance not
normally found in similar products
in this price range.
Desktop UPS
High-Performance Power Protection For PC’s And Office Equipment
Other Standard Features Included
On All Liebert PSA Models:
Three to six battery-backed UPS outlets,
depending on model size.
One to two surge-only outlets,
differentiated by color.
Up to five minutes of battery backup time at full load.
User replaceable batteries.
Advance early warning of UPS shutdown.
RJ-45 port for data line surge protection.
500/650 VA back view
Two-year warranty.
Line-Interactive UPS
Source
TVSS &
EMI/RFI
Filter
AVR &
Transfer
Switch
Battery
Inverter
Load
1000/1500 VA back view
Liebert Power Monitoring
Capabilities
The operation of the Liebert PSA
can be monitored using:
Liebert MultiLink® Automated System Shutdown Software.
For more information,
see pages 52 and 53.
21
Liebert PSI And Liebert PSI-XR Line-Interactive UPS:
750-3000VA, 1-phase
Rack-Mounted
Power Solutions
For Growing IT
Networks
Rack-mounted servers are at the
heart of today’s network computing
systems. These critical components
need reliable, compact power
protection that will keep pace with
their growing needs.
Protection That Fits
In Anywhere
From line-interactive units to
true on-line models, Liebert
rack-mount UPS systems are
designed for reliability and
space-saving flexibility. No one
packs more power capacity and
Proven high-level performance and reliability for server and network power protection.
Designed for the IT environment,
Liebert PSI UPS and the Liebert
PSI-XR extended battery model
are slim 2U sized rack/tower style,
line-interactive UPS systems.
features into a smaller package.
They offer configurable input
Liebert Has Rack-Mount
UPS Solutions For:
voltage windows allowing the
PCs.
Network Workstations.
Servers and Critical Nodes.
Network Routers, Bridges
and Hubs.
Large Network Peripherals.
Network Closets.
VoIP.
Storage Systems.
Point-of-Sale Terminals.
Test Equipment.
Other Sensitive Electronics.
customer to precisely match
their input voltage. A choice of
Other Standard Features Of Liebert PSI And Liebert PSI-XR:
Seven to eight battery-backed outlets.
0.9 Output Power Factor.
Rotatable display panel.
Automatic frequency sensing.
Wider input voltage window.
RJ-45 Data line surge protection.
communications options includes
Advance early warning of UPS system status.
Hot swappable batteries.
serial, contact closure and USB.
Up to five minutes of battery backup time
Available in 750, 1000, 1500,
at full load when utility fails.
External battery cabinet available for
2200, and 3000 VA in 120 and
230VAC models.
Liebert PSI-XR models.
Site wiring fault indicator.
USB communications, serial and contact closure
communication option.
Remote emergency power off.
Rack rail kit included.
Two-year warranty.
Liebert PSI-W and Liebert PSI-XRW web-enabled models
ship with IS-WEBRT3 card installed, for fast deployment.
22
4
Optional Liebert MicroPOD 2U POD
output distribution and maintenance
bypass module ensures continuous
uptime, even during UPS maintenance.
Source
TVSS &
EMI/RFI
Filter
AVR &
Transfer
Switch
Battery
Bi-directional
Converter
Liebert
IntelliSlot
Port
DB-9
Port
Load
Input
Circuit
Breakers
Voltage
EPO USB
RJ-45
Configuration
Port Data Line
DIP Switch
Connectors
Output
Circuit
Breakers
Rack-Mount UPS
Liebert PSI-XR UPS With Internal Battery
Line-Interactive UPS With Power-Factor Correction
Receptacles
External Power
Battery
Cord
Connector
Optional External Battery Cabinet
Add up to six cabinets for additional runtime
Liebert PSI UPS With Internal Battery
DB-9
Port
Liebert
IntelliSlot
Port
Voltage
Configuration
DIP Switch
USB
Port
RJ-45
Data Line
Connectors
Output
Circuit
Breakers
Receptacles
Input
Circuit
Breakers
Liebert Power Monitoring
Capabilities
The operation of Liebert PSI can
be monitored using:
Liebert MultiLink®Automated
System Shutdown Software.
Liebert Nform Monitoring System.
For more information,
see pages 52 and 53.
Optional Liebert IntelliSlot Web Card
(PS ISWEBCARD)
provides SNMP and
web-based
management
23
5
Liebert GXT3 On-Line UPS:
500-3000VA, 1-phase
Compact UPS combines on-line reliability, configurability and internal batteries.
Liebert GXT3 leads the industry in combining small
size, high capacity and multiple features. Designed
to be either rack-mounted or installed in a tower
configuration, the UPS is available in 500, 700, 1000,
1500, 2000 and 3000 VA ratings, in both 120 V and
230 V models.
customize Liebert GXT3 performance to your
specific requirements, providing a new level
of power protection control and adaptability.
Other Features Of Liebert
GXT3 2U Models:
A true on-line UPS, Liebert GXT3 includes features
such as power factor correction, internal batteries,
frequency conversion, unlimited external battery
connectability and internal bypass capability. And all
this is housed in a smaller 2U size cabinet that cuts
space requirements in half while providing up to
3 kVA of true on-line power – batteries included. The
UPS can also be used with external batteries
for extended run times.
Microprocessor-based control and
A Windows™ configuration program, included with
each unit allows the user to program a variety of operating parameters. This capability allows you to
with push button and indicator.
Input and output noise suppression.
USB port.
On-line UPS
Liebert IntelliSlot® communications port.
Two-year no-hassle replacement warranty.
monitoring package.
Input power factor correction.
PWM inverter.
Integral dynamic bypass.
Integral sealed, non-spillable,
hot-swappable battery.
Automatic and manual battery test feature
Bypass
PFC / Rectifier
Input
Inverter
TVSS
&
Filters
Load
DC - to - DC
Converter
Charger
GXT3 Rear View
Battery
Liebert Power Monitoring Capabilities
The operation of the Liebert GXT3 can be monitored using:
Liebert
MultiLink® Automated System Shutdown Software.
Liebert
Nform Monitoring System.
Liebert
SiteScan® Web Centralized Monitoring System.
Third-Party Monitoring Systems.
For more information, see pages 52 and 53.
24
4
Optional Liebert MicroPOD 2U POD output distribution
and maintenance bypass module ensures continuous
uptime, even during UPS maintenance.
Liebert GXT3 On-line UPS:
5kVA-10kVA 1-phase
The internal battery packs are hot-swappable,
and user repleaceable. The unit also supports
up to four external battery cabinets for
extended run time.
Rack-Mount UPS
High capacity, compact on-line UPS with flexible output voltage and power distribution.
Emergency Power Off (EPO). Terminal
connections for a normally open or
normally closed emergency power off
switch.
Wider input voltage window minimizes
battery use — allows the UPS to support
the critical load without having to transfer
to battery, extending system availability
Liebert GXT3 UPS meets the need
for higher power capacities in small
spaces with these 5kVA-10kVA UPS
systems. These true on-line double
conversion UPS systems feature
integrated maintenance bypass, as
well as optional extended battery
runtime.
Designed for use in either rack or
tower configurations, all units offer
the smallest available solutions for
these power capacities — the 5 &
6kVA model at 120/208V output in 4U
size, or the 8 & 10kVA unit 120/208V
output in a 6U package. A 6kVA 208V
output 5U size model is also available.
To help meet the need for choosing a
single supplier for global applications,
220V, 230V and 240V 50/60 Hz
models are offered with CE and C-tick
markings.
Dual Voltages For Multiple
Applications
Simultaneous output voltages
of 240/120, 208/120, 230/115,
220/110, or 200/100 VAC provide the
flexibility to adapt to multiple load
requirements without the need to add
additional transformers that take up
extra space and add weight.
Other Product Features Of
Liebert GXT3 5kVA-10kVA UPS
Models Include:
for when battery back-up is truly needed.
Internal automatic and manual bypass.
Assures continuity of power to critical
loads during system maintenance or in
User replaceable hot-swappable internal
case of internal fault.
batteries. Provide four minutes of runtime
Self-diagnostics. Automatically tests unit
at full load.
electronics and batteries simplifying
Additional runtime with additional battery
maintenance and troubleshooting.
cabinets.
Liebert IntelliSlot Web Card provides SNMP
Built-in USB communications for use with
and web-based monitoring and control of
Liebert MultiLink™ Automated Shutdown
UPS.
Software. Allows you to monitor
Standard two-year replacement warranty.
communication between the UPS and a
No-hassle warranty provides paid shipping
server, and ensures a graceful unattended
both ways. Optional one-year and three
shutdown.
year extensions available.
Built-in closure signals. Provides
notification to monitoring systems
of operating conditions including: on
battery, low battery, battery mode
shutdown and any mode shutdown.
Liebert Power Monitoring Capabilities
The operation of the UPS can be monitored using:
Liebert
IntelliSlot Web Card.
Liebert
MultiLink® Automated System
Shutdown Software.
Liebert
Nform Monitoring System.
Liebert
SiteScan® Web Centralized Monitoring
System.
Liebert
Universal Monitor And Remote Power
Monitor Panels.
Third-Party
Monitoring Systems.
For more information, see pages 52 and 53.
25
5
Liebert Nfinity® On-Line UPS:
4-20 kVA, 1-phase
Protecting The
Enterprise: High
Availability UPS
Protection For
Mission-Critical
Applications
The need to safeguard critical
operations from power problems
can be solved through the use of
large-scale UPS systems.
A Powerful Defense
Against Uptime Threats
Liebert offers a full range of
enterprise power protection
solutions for any size facility from a
small computer room to the largest
data and communications centers.
Liebert Enterprise UPS
Solutions Are Ideal For
Large-Scale Data Centers.
Facility-Wide Networks.
Large-Scale Telecommunications
Centers.
The Liebert Nfinity power system is a scalable 4
to 16 kVA or 12 to 20 kVA UPS designed with N+x
parallel redundancy to provide a fault-tolerant
network of power protection.
The modular design of the Liebert Nfinity power
system was devised to provide easy scalability to
users as their power demands grow. Configurations
can be cost-effectively upgraded without
re-investing in a new system or installation.
A True On-Line System That Delivers
Continuous, Regenerated Sinewave
Output Power
The Liebert Nfinity is a true on-line,
double-conversion UPS that provides 100% power
conditioning, zero transfer time to battery, no
change in output voltage and better transient
suppression than line-interactive units.
Its unique frame design houses all of the modular
system components, including 4 kVA power
modules, battery modules and system control
modules. By simply installing additional power
or battery modules, you can expand your current
system, extend backup runtime or add redundancy.
Intelligent power modules provide protection
from all power aberrations, and a patent pending
electrical current-sharing technology provides
equal distribution of power among all modules.
The IntelliBattery™ modules utilize multiple
sensors to continuously monitor battery voltage,
current and temperature to determine and
predict performance.
The IntelliControl™ module works with the user
interface to provide vital information about the
condition of the power and battery modules.
Colocation Facilities.
Internet Data Centers.
Server Farms.
Data Warehouses.
Network Management Centers.
Liebert Power Monitoring Capabilities
Medical Imaging Equipment.
Test and Laboratory Facilities.
The operation of the Liebert Nfinity UPS can be
monitored using:
Industrial Process Control
Operations.
®
Liebert
Liebert
IntelliSlot Web Card.
®
MultiLink Automated System Shutdown
Software.
Liebert
SiteScan® Web Centralized
Monitoring System.
26
4
For more information, see pages 52 and 53.
Additional Features Of The
Liebert Nfinity Power System:
Hot-swappable modules allow
the user to replace modules or upgrade
the system without disturbing
connected equipment.
Continuous self-diagnostics
detect and isolate faults to prevent
cascading system failures, as well as to
simplify maintenance and
troubleshooting.
Patent pending intelligent
bypass technology provides seamless
transfers to and from
the bypass source.
Wide input voltage window minimizes
battery operation
to maximize battery life.
Fully assembled and factory-tested,
simple to install and ready for use for a
plug-and-play solution that is functional
right out of the box.
Additional battery cabinets can
be added for backup times up
to 72 hours.
Two-year limited warranty for repair or
replacement with warranty extensions
also available.
Slimline
Distribution
Cabinet
Power
Module
Battery
Cabinet
Liebert NX On-Line UPS:
10-30 kVA, 3-phase
The Liebert NX 10-30 kVA product family offers true
on-line, double conversion, three-phase UPS systems
that deliver complete, centralized power protection
for mission-critical systems. Available in 10, 15, 20 &
30 kVA capacities, these rugged units are designed to
meet the high availability power needs of a wide variety
of IT applications. Liebert NX 10-30 kVA UPS systems
combine advanced operating features, compact size and
low cost of ownership in a range of sizes to suit room or
data center needs.
The “all-in-one” design of the Liebert NX 10-30 kVA
UPS provides more protection security and efficiency
than using separate, smaller power units spread
throughout the facility. The Liebert NX delivers complete
protection with a true on-line IGBT-based double
conversion design. The system’s advanced topology
features a digital signal processor controlled IGBT
rectifier and IGBT inverter.
®
Enterprise UPS
Power designed to grow with your needs.
Other Features Of Liebert NX 10-30 kVA UPS Models:
Increases growth flexibility by handling larger loads, and offers the
ability to parallel like-sized 20 and 30 kVA modules for increased
capacity and redundancy.
Achieves higher availability by reducing the number of UPS units
required to power your room.
Reduces total cost of ownership through the use of longer life
batteries and simplified preventive maintenance.
Wider input voltage window and frequency tolerances contribute to
higher system availability by minimizing battery usage.
Operates under a wide variety of conditions, handling 100% nonlinear
loads with 3:1 crest factor, as well as 100% unbalanced loading.
IGBT-based power factor corrected rectifier enables the Liebert NX to
achieve its impressive THD and PF performance.
Advanced inverter control technology provides the highest output
power quality, ensuring very low output voltage THD and superior
waveform to protect connected loads.
Fully digital control technology provides a highly accurate, drift-proof
control compared to traditional analog electronics.
Liebert Power Monitoring Capabilities
The operation of the Liebert NX 10-30 kVA
UPS can be monitored using:
Liebert
IntelliSlot Web Card.
Liebert
MultiLink® Automated
System Shutdown Software.
Liebert
Nform ™ Monitoring System.
Liebert
SiteScan® Web Centralized
Monitoring System.
Third-Party
Monitoring Systems.
For more information, see pages 52 and 53.
27
5
Liebert NX On-Line UPS:
40-200 kVA, 3-phase
Now There’s A Data Center UPS That Matches Your Growth Plans.
For high availability, high capacity applications, the
transformerless Liebert NX 40-200kVA UPS systems offer true
on-line, double conversion technology to protect and condition
against the full range of power irregularities. Plus they do it with a
level of flexibility not previously found in systems of this size.
A wider input voltage window and frequency tolerances help to
minimize transfers to battery, reducing the number of charging
and discharging cycles. Availability is also enhanced with a triple
mode battery charger that enables fast battery recharge. Longer
battery backup time may be achieved by paralleling additional
battery cabinets to the system.
Softscale™ technology provides flexibility to increase UPS capacity
without changes in your infrastructure. From 40 up to 80kVA, 80
up to 120, and 160 to 200. You may also parallel UPS modules for
capacity and redundancy.
The Liebert NX power core combined with the optional Liebert
NX BDC (Bypass Distribution Cabinet) lets you simplify power
distribution and voltage conversion. This combination provides
packaged power distribution for today’s rack-based data centers
and IT facilities.
Liebert Power Monitoring
Capabilities
The operation of the Liebert NX 40-200
kVA UPS can be monitored using:
Liebert
IntelliSlot Web Card.
Liebert
MultiLink® Automated
System Shutdown Software.
Liebert
Nform ™ Monitoring
System.
Liebert
SiteScan® Web Centralized
Monitoring System.
Third-Party
Monitoring Systems.
For more information, see pages 52
and 53.
Battery Cabinet
Liebert NX UPS 160-200 kVA
28
Power Core
Liebert NX BDC
Cutting-Edge Power Technology
Makes The Difference
High overload rating handles 125% for 10 minutes,
150% for one minute and a 1000% overload for 10
milliseconds.
Digital controls provide the fastest possible
power management to enhance reliability, accuracy and
efficiency.
Front access models available for installation along
a wall. Front and rear access models available for
installation in a row.
Compact footprint requires less floor space, leaving you
with more room for other equipment.
Load Bus Synchronization standard.
Soft Switching technology increases efficiency
by up to 2% and saves energy.
Integrated ground fault detection allows for effective
transformer-less design while saving space and lowering
the unit weight.
Parallel for redundancy or capacity.
Active input rectifier is generator
and utility friendly.
Web card monitoring standard.
One year warranty.
Softscale™ technology, paralleling capabilities and Eco-mode™ all
contribute to lower initial, incremental and operating costs.
Liebert NX 40-200 kVA UPS Systems Softscale Technology
Liebert NX 40-200 kVA UPS systems have Softscale technology
that provides flexibility to increase UPS capacity by 20 or 40kVA
without changes in your infrastructure. Allows paralleling of
unlike-sized models for capacity or redundancy. Designed for
optimized performance with the same high efficiency at 40%
utilization as at 100% utilization.
Paralleling Capabilities
Liebert NX 40-200 kVA systems allow you to parallel UPS
modules for capacity and redundancy, eliminating the
batteries as a single point of failure because each UPS has its
own isolated battery. Liebert NX also features integrated dual
bus synchronization as a standard feature. This provides the
capability to synchronize the outputs of two independent UPS
modules when they are configured as a redundant system
feeding independent distribution paths.
Eco-Mode High Efficiency Configuration
If selected, this operating mode switches the UPS to static
bypass during normal operation, increasing efficiency to up to
97% at full load. When power problems are detected the UPS
automatically switches back to double conversion mode.
Liebert NX BDC
The optional Liebert NX BDC provides flexibility in input and
output voltage for a variety of applications. This cabinet is
available in capacities to cover the Liebert NX UPS range of
40-200kVA. The monitoring panel matches the UPS unit. Power
and control cabling from this cabinet to the UPS is included,
enhancing ease of installation and availability. For ease of
installation and maintenance, the cabinet offers top or bottom
cable entry and models are available in front and rear access, or
front access only configurations.
Liebert NX Power Core
40-80 kVA
29
Enterprise UPS
Liebert NX UPS Systems Incorporate A
Number Of Other Exceptional Features:
Liebert APM™ On-line UPS with FlexPower Technology:
15-90kVA, 3-phase
Liebert APM is a transformer-free,
On-line double-conversion technology
The cost-efficient Liebert APM provides
on-line UPS that allows quick and easy
and internal redundancy combine to
the reliability of an enterprise UPS, and
capacity increases with the addition of
provide protection from the full range of
the flexibility to adapt to increasing power
rack-mounted FlexPower™ core hardware
power irregularities, offering the highest
demands. This is a true, best-in-class solution
assemblies. The core assemblies allow
availability.
from the leader in power and cooling solutions
the UPS to expand for capacity or
redundancy in 15kW increments within a
single cabinet — 15kW to 45kW or 90kW.
No additional floorspace is required.
FlexPower core assemblies may even be
added without powering down connected
equipment.
With efficiencies of up to 94% at typical
load levels, Liebert APM offers one of the
industry’s highest efficiency ratings. The
UPS is even more efficient when sized in
accordance with present system needs,
instead of purchasing a larger capacity
system to anticipate future requirements.
Liebert APM BDC, Liebert APM 90 kW FlexPower Core,
and Liebert APM External Battery Cabinet
30
for computer rooms and data centers. Key
features and benefits include:
Up to 94% efficiency — High efficiency results
in lower energy consumption
Front service access — for quick and easy
installation
Transformer-free design — provides a
smaller footprint and lower cost compared to
transformer-based systems
Matching bypass and distribution cabinet
— increase reliability and safety by switching
the protected load to bypass power for
maintenance and service
Matching battery cabinets — provides added
back-up capacity for extended runtimes
Distributed controls — each FlexPower core
assembly includes DSP controls, minimizing
possibility of single point of failure
Standalone static bypass module — features
independent controls in separate assembly to
provide higher reliability
Top or bottom cable entry — enables
installation on raised or non-raised floors
Large dot-matrix monitor with graphical
display — allows easy viewing and
comprehensive system information Includes
three Liebert
IntelliSlot ports for web-based
communications ability — Liebert IntelliSlot
card IS-485EXI allows communication with
Liebert SiteScan; Liebert IntelliSlot card
IS-WEBL allows communication with Liebert
Nform (90 day license included)
One-year warranty — provides full system
coverage for one year
Enterprise UPS
Other Product Features Of
Liebert APM UPS Include:
Internal bypass allows FlexPower assemblies to
be added or replaced without powering down
the connected equipment
45kW model includes internal batteries. More
runtime is available with optional external
battery cabinets
90kW units use optional external battery
cabinets for battery runtime
Conveniently positioned, easy-to-reach
power terminations simplify unit wiring and
installation
Enterprise-quality batteries in an external
battery cabinet provides backup time for 90kW
frame size, and additional runtime for 45kW
frame size
Withstand rating of 65kAIC ensures reliability
and safety under even the most extreme utility
conditions
Unity power factor design (kW=kVA) is
optimized for today’s high power factor loads
Liebert APM is ideally suited for:
Small to medium-size data centers
Server rooms
Production areas
Labs and testing facilities
Telecommunications or process
control centers
Liebert Power Monitoring Capabilities
Liebert APM 90kW
FlexPower Core
The operation of the Liebert Series 610 UPS can be
monitored using:
Liebert
IntelliSlot Web Card.
Liebert
MultiLink® Automated System Shutdown
Software.
Liebert
Nform Monitoring System.
Liebert
SiteScan® Web Centralized Monitoring System.
Liebert
Universal Monitor And Remote Power Monitor
Panels.
Third-Party
Monitoring Systems.
For more information, see pages 52 and 53.
31
Liebert Npower™ On-Line UPS:
30-90 kVA, 3-phase
Liebert Npower is the next generation of large-scale UPS, utilizing
true double-conversion on-line technology to protect against the
full spectrum of input and output power disturbances. Liebert
Npower’s all-digital ActiveStar™ controls are DSPbased and feature a
unique, patent-pending technology that allows it to make ultra-fast
adjustments to changing loads, including subcycle pulse-width
corrections to keep the output voltage waveform nearly flawless. The
Liebert Npower system is available in seven models ranging from 30
kVA up to 130 kVA.
The Liebert Npower is rugged enough to handle load branch faults,
input faults, 100% step loads, PDU startup inrush and motor-load
startup. Output voltage distortion (THD) typically measures less
than 2.5% — even under worst-case conditions. The combination of
rugged inverter and continuous rated static switch gives the Liebert
Npower exceptional overload capability.
Standard And Optional Features Of The
Liebert Npower UPS:
1+1 redundant configurations (for single-bus systems)
that allow concurrent maintenance resulting in virtually
100% availability of conditioned power
Load bus synchronization option for dual-bus systems
with two power feeds for added availability (for use with
Liebert transfer switches or dual-input PDUs)
Excellent efficiency powering non-linear, unbalanced and
crest loads
Small footprint in a full-featured system
Exceptional overload and transient performance
All DSP-controlled UPS
Easy-to-read screen and navigation menu on a large LCD
display
Superior battery algorithms used to minimize operation
of batteries and include self-test and temperature
compensated charging
Liebert Power Monitoring Capabilities
The operation of the Liebert NX 40-200 kVA UPS can be
monitored using:
Liebert MultiLink® Automated System Shutdown
Software.
Liebert Nform™ Monitoring System.
Liebert SiteScan® Web Centralized Monitoring System.
Liebert Universal Monitor And Remote Power Monitor
Panels.
Third-Party Monitoring Systems.
Albér Battery Monitoring.
For more information, see pages 52 and 53.
Liebert Npower UPS
32
Enterprise UPS
Great Value in a Mid-Range UPS
High-Availability Configurations
The Liebert Npower gives you more UPS for about the same initial
The Liebert Npower UPS can be used reliably as a single
cost as lesser products. Furthermore, the Npower will usually
module and in various redundant configurations. The
cost significantly less over the lifetime of the product. The value
Npower 1+1 Redundant option, described on pages 10-11
comes from several elements: exceptional protection, higher
of this brochure, is a cost-effective parallel-redundant
efficiency, lower installation, maintenance and operating costs,
system. Parallel redundancy improves maintainability and
smaller total system footprint and more standard features.
fault tolerance, thereby enhancing system availability.
Higher Efficiency in Real-World Applications
For the ultimate in high-availability systems, Npower can
Critical applications require a UPS to have an input filter (to
reduce input current distortion) and an output isolation
transformer (to isolate your critical load), while powering
non-linear (high-crest-factor) loads at less than the rated capacity
of the UPS.
be applied in various distributed-redundant (dual-bus)
configurations, using our unique Load Bus Sync™ option.
Both Load Bus Sync and 1+1 Redundant configurations
can be factory-installed or retrofitted to existing Npower
installations.
The fully equipped Liebert Npower has excellent efficiency
— typically between 92% and 93.5% — while powering
high-crest-factor loads between 50 and 100% of its rated
capacity. Furthermore, the input power factor is exceptionally
high, typically 0.95 to 0.96 for models with 480 VAC input.
In this power range (up to 130 kVA), the only way to exceed
93.5% efficiency is to leave out something important. Some
competitors omit the output isolation transformer; others put
your critical load at risk with their single-conversion UPS products.
Only you can decide if the claimed savings justify the risk.
33
Liebert NXL—Stack Up Performance
100% Load
Low & High Line Conditions
40˚C / 104˚F Temperature
50% Clogged Air Filter
Fan Failure
Liebert NXL On-Line UPS:
250-750 kVA, 3-phase
Liebert NXL UPS Provides Reliable Power
Protection And Advanced Technology
For High Power Applications.
The industry’s most reliable power protection and
advanced technology has been combined into a new
generation of three-phase UPS systems for high power
applications — the Liebert NXL from Emerson Network
Power.
Available in 250, 300, 400, 500, 625 and 750 kVA
single module models and multi-module systems, the
transformer-based Liebert NXL provides excellent dynamic
performance, with the ability to handle virtually any input
condition while still providing computer grade output
to critical loads.
The leader in large UPS system installations, Emerson
offers complete and unequalled support, including
engineering consultation, the largest and most widespread
factory-trained service organization, and the industry’s
largest and most advanced production and witness test
facility.
Liebert NXL UPS
34
Battery Cabinet
High Altitude1500 Meters
Liebert NXL is
designed to
handle all severe
conditions
simultaneously
and still support
100% load with
no need for
derating.
Other Liebert NXL Features Include:
Matching battery and maintenance bypass cabinets for easy
configuration.
Top or bottom cable entry.
Internal cabinet cable wiring simplifies installation.
Ship-ahead I/O section can be installed before UPS installation.
Liebert ActiveStar® Digital Signal Processor (DSP) controls—no
potentiometers.
Redundant components—fans, power supplies, and
communications cards.
Provides superior handling of present and future computer loads,
up to 0.95 leading power factor without derating.
Color touch screen controls improve user interface and reduce risk
of human error.
Excellent dynamic performance and fault tolerance.
Generator and utility friendly with low current distortion.
Front access for installation and service.
Compact cabinets require less floor space.
Inter-cabinet cabling requires less hard wiring.
Built-in battery cabinet breaker isolates string for ease of service.
Energy efficient operation, with up to 94% operating efficiency.
First large UPS to be tested and UL Listed to UL1778 Fourth Edition,
which requires testing of every specification.
Power Core
Maintenance Bypass Cabinet
er
AC Input
AC Input
Bypass
Output
Bypass
Output
Critical Bus
ACBus
Output
Critical
AC Output
AC Input
Rectifier
Rectifier
Liebert
MultiLink® Automated System Shutdown Software.
Liebert
Nform™ Monitoring System.
Liebert
SiteScan® Web Centralized Monitoring System.
Liebert
Universal Monitor and Remote Power Monitor Panels.
Third-Party Monitoring Systems.
Battery
Battery
Four
Liebert IntelliSlot ports. Ships with standard
485 Liebert
SiteScan Web interface.
Albér
Bypass
AC Input
Bypass
AC Input
Rectifier
AC Input
Rectifier
AC Input
Rectifier
Rectifier
Rectifier
The operation of the Liebert NXL UPS can be monitored using:
AC Input
Rectifier
System
Bypass
System
Breaker
Bypass
Breaker
Static
StaticSwitch
Switch
Battery
Battery
Inverter
Inverter
Inverter
Inverter
BDSi Integrated Battery Monitoring System.
For more information, see pages 52 and 53.
UPS Output
Breaker
UPS Output
Breaker
Optimized Performance
AC Output
To Load
AC Output
To Load
Liebert NXL Single Module System One-Line (250-750 kVA)
Enterprise UPS
Inverter
Liebert Power Monitoring Capabilities
Intelligent Eco-Mode™ — Liebert NXL offers up to 97%
full load efficiency during user-selectable Intelligent
Eco-Mode™ operation. The always-on inverter ensures
Bypass
AC Input
Bypass
AC Input
Static Switch
Static Switch
Rectifier
Inverter
Rectifier
Inverter
high availability and seamlessly assumes the load in case
of a utility power disturbance.
Rectifier
AC Input
Rectifier
AC Input
AC Output
to Load
AC Output
to Load
Intelligent Paralleling™ — Modules paralleled with
a system control cabinet (N+1 configuration) may be
Battery
Battery
customer selected to use Intelligent Paralleling, which
increases efficiency by turning off redundant modules.
Off time is equally distributed between all modules.
Configuration Options
Single-Module Configuration (250-750kVA models)
Liebert NXL 1+N Multi-Module System One-Line (250-750kVA)
Distributed Static Switch
AC Input
AC Input
Rectifier
AC Input
Rectifier
AC Input
Single-module systems provide a basic protection
configuration.
The critical bus is powered by a single UPS system
with bypass capability.
1+N Parallel Configuration (250-750kVA models)
Paralleling of single UPS units, offers easy scalability for
Battery
Battery
Bypass
AC Input
Bypass
AC Input
Rectifier
Rectifier
Static
StaticSwitch
Switch
Static
StaticSwitch
Switch
Inverter
Inverter
Battery
Battery
System
Bypass
System
Breaker
Bypass
Breaker
Inverter
Inverter
UPS Output
Breaker
UPS Output
Breaker
N+1 Parallel Configuration (500-750kVA models)
switch
equires System Control Cabinet with centralized
R
static switch
System Control Cabinet can be easily integrated into
any switchgear solution
System rated static switch with bypass breaker offers
high
Bypassfault clearing capability, and high availability
Output
Centralized monitoring allows good visibility and
easy control of total system
UCritical
p toBus
six units may be used together for capacity/
AC Output
redundancy
Bypass
AC Input
Bypass
AC Input
Rectifier
Rectifier
increased capacity or redundancy
Each unit has its own static switch for bypass
Provides redundant capacity without the need for a
system control cabinet
Paralleling of Multi Module units, without built-in static
Rectifier
AC Input
Rectifier
AC Input
AC Output
To Load
AC Output
To Load
Liebert NXL N+1 Multi-Module System One-Line (500-750 kVA)
Centralized Static Switch
AC Input
Rectifier
AC Input
Rectifier
Rectifier
AC Input
Rectifier
Static
Switch
Battery
Bypass
AC Input
System
Bypass
Breaker
Battery
Inverter
Inverter
UPS Output
Breaker
AC Output
To Load
35
Liebert Series 610 On-Line 610 UPS:
225-1000 kVA, 3-phase
Ultimate reliability for large-scale,
mission critical applications.
Offering the ultimate in power protection efficiency
and reliability for larger facilities, Liebert Series 610
UPS systems are available in a wide range of capacities
from 225 kVA to 1000 kVA. These systems are
designed to protect mission-critical operations from
the full range of power quality problems and outages.
Efficient IGBT (insulated gate bipolar transistor)
technology is combined with pulse width modulation/
stepwave topology to provide reliable operation
and create a unit that packs more capacity into a
smaller footprint.
Thanks to all-digital controls and a unique inverter
topology, the Series 610 can be applied in several
single-bus configurations, including single module,
parallel redundant and isolated redundant systems.
For added reliability, multiple units can be utilized in
a dual-bus system with two power feeds to provide
redundancy during normal operation, as well as
continuous, shutdown-free operation when service is required.
Liebert Power Monitoring Capabilities
The operation of the Liebert Series 610 UPS can be monitored using:
Liebert
MultiLink® Automated System Shutdown Software.
Liebert
Nform™ Monitoring System.
Liebert
SiteScan® Web Centralized Monitoring System.
Liebert
Universal Monitor and Remote Power Monitor Panels.
Third-Party Monitoring Systems.
Liebert BDS-40 Battery Monitoring Alber
Technology By Liebert.
For more information, see pages 52 and 53.
36
Other Features Include:
Higher DC bus utilization provides higher AC/AC and
DC/AC efficiency and allows a relatively smaller battery.
Continuous improvement dramatically improves
reliability by reducing the number of parts—and the
potential points of failure within the system.
Lower operating costs and long life thanks to 93%
operating efficiency and an industry leading power
factor of greater than 0.92 for all models.
The ability to handle unbalanced and 100%
non-linear loads.
Lower heat output eliminates the need for complex
air cooling arrangements.
Robust inverter manages overloads and faults without
the need for a static switch on the system output.
Designed for intuitive, menu-driven operation, a large
backlit LCD operator interface displays system controls,
full-featured monitoring and alarm notifications.
Liebert NXL, Liebert Series 610
System Control Cabinet - SCC
monitors the output of the UPS’s and assures that all of
the outputs are synchronized. The System Control Cabinet
also contains a static bypass switch which assists in the
maintenance of the system.
System Control Cabinets are integrated into
the switchgear of your choice.
Centralized monitoring controls allow
for greater visibility into the system.
Liebert SCC’s 610 contains a static bypass switch
with manually operated disconnects and two
motor operated system circuit breakers.
Standard and custom power distribution switchgear
systems are available for use in Tier 1 through Tier 4 UPS
system configurations.
Each SCC includes:
Microprocessor-based monitoring with backlit LCD
display, controls.
Momentary-duty static switch.
Continuous duty static switch options
with custom switchgear.
Automatic system isolation and bypass breakers.
Automatic equalize charge timer.
Interface for a remote power off.
Liebert SiteScan® Web interface.
Alarm status contacts.
RS-232 port.
Visual/audible alarms.
Enterprise UPS
When paralleling two or more units, a system control cabinet
37
Liebert Trinergy, Multi-Modal On-line UPS:
200 kVA - 3.2 MVA, 3-phase
The Liebert Trinergy multi-modal on-line UPS from
Emerson Network Power is the only system of its
kind to offer three modes of operation, providing the
industry’s highest levels of efficiency and reliability.
It also offers the widest range of modular growth to
meet future requirements — start at 400kVA and grow
up to 3.2MVA.
Liebert Trinergy UPS has the highest level of flexibility,
energy efficiency and adaptability of any product in its
range. This transformer-free, modular, multi-modal
on-line UPS supports high power data center loads
with up to 99% energy efficiency depending on
incoming
power quality.
Liebert Trinergy Combines High
Efficiency With Lower CAPEX
Higher Efficiency — Means Lower OPEX
Liebert Trinergy UPS design features greatly
The unique architecture and technology of Liebert Trinergy UPS was developed
minimize the total cost of ownership in every stage
to enhance efficiency. Able to recognize specific power quality conditions
of installation from preparation to startup.
and respond appropriately to each disturbance, Liebert Trinergy UPS delivers
Installation Efficiency — The 415V structure and
modular architecture of the Liebert Trinergy
UPS allow for cost-effective installation , and the
incremental addition of capacity as load increases,
maximum energy savings while providing the best output power quality and
conditioning to the load and the source. This provides significant operating
savings with up to 99% efficiency and reduced requirements for power and air
conditioning.
permitting the user to conserve capital until
The revolutionary architecture comes from incorporating the three industry
additional capacity is required thanks to lower
standard functioning configurations for the first time in one high power UPS,
costs for installation and materials, reduced size of
controlled by an energy optimizing algorithm:
electrical infrastructure and reduced cabling
Maximum Power Control (Double Conversion/VFI) — Provides the highest
Reduced Infrastructure Size And Operating Costs
level of power conditioning and protects the load from all electrical network
— The extremely high efficiency achieved with
disturbances.
Liebert Trinergy UPS reduces the energy dissipated
by the UPS (kW), thus minimizing the demand and
consumption of the air conditioning system.
Circular Redundancy — The Liebert Trinergy UPS
Maximum Energy Saving (Standby/VFD) — Detects when conditioning is not
required and allows the energy flow to pass through the bypass line.
High Effciency and Power Conditioning (Line-Interactive/VI) — Compensates
the load THDi, PF and main sags and swells.
system’s circular redundancy feature adjusts
The Liebert Trinergy UPS has the ability to choose the most efficient operating
available UPS capacity to meet immediate load
mode based on different electrical conditions which ensures that the supply
and redundancy requirements by automatically
to the load remains optimal at all times. This allows the UPS to achieve
switching excess module capacity to standby, thus
extraordinary energy savings, first class performance and
greatly improving efficiency at partial load and
maximum power protection.
reducing operating costs.
38
User Interface
Enterprise UPS
Three Dimensional Modularity
With three dimensions of modularity — Vertical, Horizontal and Orthogonal
— Liebert Trinergy UPS allows businesses to expand their power protection
needs at the same pace as their evolving load requirements by simply
adding additional power modules. Modules can be added at anytime during
the lifecycle of the UPS, allowing it to reach up to 3.2MVAv .
Vertical modularity — The stacked core assemblies in each core module
may be individually extracted for service purposes while the UPS system
continues to protect your load.
Horizontal modularity — Trinergy can scale up to 400 kVA arrays by
adding complete 200 kVA power modules around the input/output
power section.
Orthogonal modularity — The ability to work with up to 8 complete
arrays in parallel — up to 3.2MVA.
Local monitoring of the Liebert Trinergy UPS is
provided by an on-unit LCD touch screen:
High security access with separate password
levels for users and service engineers.
Liebert Trinergy UPS
User-friendly graphical interface.
Single-line mimic diagram for system status
Contemporary dashboard-style indicators for
major system values and conditions
Module level alerts for all major subsystems
including rectifier, inverter, batteries, static
switch and bypass
System voltages and power
Load vs. capacity indicator
System temperature gauge
Battery charge indicator
Liebert Power Monitoring Capabilities
The operation of the Liebert Trinergy UPS can be
monitored using:
Liebert MultiLink® Automated System Shutdown
Software.
Liebert Nform Monitoring System.
Liebert SiteScan® Web Centralized Monitoring System.
Liebert Universal Monitor And Remote Power Monitor
Panels.
200 kW Power Core
I/O Cabinet
200 kW Power Core
Third-Party Monitoring Systems.
Albér Battery Monitoring.
For more information, see pages 52 and 53.
39
Liebert FDC
Rack Power Distribution
Power When And Where You Need It
Rack Sized Power
Producing quality power is the first step—getting it to
As your rack-based systems
grow in number, complexity
and criticality—so must your
power distribution system. To
meet this challenge Liebert has
created a product designed to
optimize power distribution at
the rack level with the “plug
and play” flexibility that today’s
IT managers demand from their
systems.
critical equipment in the most efficient manner while
maintaining proper voltages and other key parameters is
the important next step.
Making Sure The Power Is Always There When You Need It
Liebert’s range of power distribution equipment is
specially designed for high-availability applications.
It includes both distribution and switching systems
to provide reliable power to critical loads.
Liebert Power Distribution
Solutions Are Ideal For:
Large-Scale Computer Centers.
Facility-Wide Networks.
Large-Scale Telecommunications Centers
Colocation Facilities.
Internet Data Centers.
Server Farms.
Data Warehouses.
Network Management Centers.
Medical Imaging Equipment.
Test and Laboratory Facilities.
Industrial Process Control Operations.
Distribution Cabinet
The Liebert FDC distribution
cabinet extends the
functionality of the PDU by
packaging 168 poles in a
stand-alone cabinet with a
rack foot print.
The Standard Liebert FDC Unit
Includes:
4 complete panelboards with main
breaker (total 168 poles).
Front and rear access only.
Bottom cable exit.
22kAIC main panelboard breakers.
40
Optional Features Include:
Top cable exit.
LDM monitoring with remote
communications—Modbus output.
Isolated ground bus bars.
EZ-view doors enable visual
inspection of the breakers
without unlocking the cabinet.
Square D or GE inline panelboards
in bolt-in or plug-in styles.
Current monitoring panel.
Tie-breakers to allow connection
of two panelboards to a common
panelboard main breaker (requires
side access).
Plug-in main panelboard breakers.
Liebert RDC Remote Distribution Cabinet
Power Distribution Systems
The Better Way To Wire High Density Facilities
The influx of client/server rack equipment is changing the content of data
centers. There are more devices than before—and they consume less power
than their predecessors. As a result, most power distribution units (PDUs)
run out of circuit breaker poles before they run out of rated capacity.
The Liebert Remote Distribution Cabinet (RDC) extends the functionality of
the PDU by packaging 168 poles (four complete 42-pole inline panelboards)
in a stand-alone cabinet.
Unlike standard Liebert Precision Power Centers (PPCs), the RDC has no
internal isolation transformer and requires 4-wire-plus-ground input from
a PPC or other transformer. By separating the PPC transformer from the
panelboard function, Liebert was able to create an extremely compact
package that fits the area of a standard 24” x 24” raised-floor tile.
The individual panelboards inside the Liebert Remote Distribution Cabinet
can receive power from different sources. This enables the RDC to provide
fault-tolerant, fully maintainable dual-bus power to nearby load equipment.
A dual-input RDC can be configured with two panelboards on each side
sharing common input terminals.
Other Features Of The Liebert RDC:
Unobstructed wiring access for easy of installation.
Complete isolation and maintainability.
Optional clear door insert panels enabling visual inspection
of the breakers without unlocking the cabinet.
Optional adjustable accent panels to make it easier to
compensate for breaker “creep”.
Single, dual or four-input configurations.
Optional current monitoring panel.
Optional input junction box and underfloor conduit box.
UL labeled.
Conduit-landing plate,
left, is positioned for
easy cable access.
Liebert Power Monitoring Capabilities
The operation of the Liebert FDC and Liebert RDC
can be monitored using:
Liebert
SiteScan® Web Centralized Monitoring System.
For more information, see pages 52 and 53.
41
Liebert FPC Rack-sized Power Conditioning
and Distribution Cabinet
Optimized For Row-based Applications.
The Liebert FPC power conditioning and distribution cabinet provides
higher quality, more flexible power distribution for high-density
data centers. It is engineered to combine the convenience and cost
savings of a pre-packaged, factory-tested unit with the flexibility of a
custom-tailored power system. This self-contained system provides
power isolation, power distribution, computer-grade grounding and
power monitoring.
Ranging in capacity from 15kVA up to 300kVA, the Liebert FPC comes
in a 19” rack and 47” wide rack, the size of two 19” racks, and is
designed to fit at the end of, or within, a row of racks, as well as in a
stand-alone configuration.
The packaged system approach of the Liebert FPC is convenient
and space-saving, reducing installation time and cost compared to a
conventional approach using multiple interconnected components.
42
Other Standard Features Of The Liebert FPC:
Computer-grade grounding.
Fully compatible with the non-linear loads.
Main input breaker with shunt trip.
Double-shielded TP1 listed isolation transformer.*
One or more individually enclosed 42-pole output
panelboards.
Built-in metering and alarm annunciation with
communication to Liebert centralized monitoring.
Compact single cabinet conserves valuable floor space.
Single input cable connection reduces installation time
and cost.
Full front and rear access.
Can be easily relocated to protect your investment.
UL and ULc Listed as a complete system.
*Energy Policy Act of 2005 requires that all “distribution transformers”
and all “low-voltage dry-type distribution transformer” manufacturers
produce only TP-1 units as of January 1, 2007. TP-1 transformers have
a higher efficiency than standard isolation transformers, and are
optimized to have the highest efficiency at 35% load.
Liebert PPC Packaged Power Conditioning
and Distribution
Power Distribution Systems
Optimized For Room-Based Applications.
Liebert Precision Power Center
The Liebert Precision Power Center (PPC) power
conditioning and distribution cabinet is designed
to bring you a distribution system that offers the
benefits of a custom-tailored power system, with
the convenience and cost savings of a pre-packaged,
factory-tested unit. Housed in a single, self-contained
cabinet, it combines distribution, computer-grade
grounding, isolation, and power monitoring to provide
the protection your vital computer or communications
equipment demands. Available in 15-800 kVA capacity
systems for raised floor applications and 15-150 kVA
capacities in top-exit models for non-raised floors, the
Liebert PPC offers flexible expansion capabilities to fit
growing sites.
The packaged system concept of the Liebert PPC is
convenient and space-saving, reducing installation time
and cost compared to a conventional approach using
multiple interconnected components.
Other Standard Features Of The Liebert PPC:
Secure distribution and circuit identification.
Non-linear load compatibility.
Individual circuit breaker protection.
Built-in metering and alarm annunciation, with
communication to Liebert-centralized
monitoring systems.
Double-shielded TP-1 listed isolation transformer.*
Easy installation, with single input cable connection
and application matched connections to the load.
Expandable with add-on panelboards
and flexible cabling.
Flexibility to protect your investment by allowing
the unit to be easily relocated.
UL and CSA Listed as a complete system.
Liebert Power Monitoring Capabilities
The operation of the Liebert Precision Power
Center and Liebert FPC can be monitored using:
Liebert
Nform™ Monitoring System.
Liebert
SiteScan® Web Centralized
Monitoring System.
Third-Party Monitoring Systems.
For more information, see pages 52 and 53.
*Energy Policy Act of 2005 requires that all “distribution transformers”
and all “low-voltage dry-type distribution transformer” manufacturers
produce only TP-1 units as of January 1, 2007. TP-1 transformers have
a higher efficiency than standard isolation transformers, and are
optimized to have the highest efficiency at 35% load.
43
Easy-To-Use Color
Touch-Screen Interface
The controls of the Liebert STS2 are
intuitive and simple. The pop-up menus
are easy to understand and provide a
wealth of operational and diagnostic
information.
Liebert STS2 Static Transfer Switch
The color LCD monitor is divided into
three segments. In addition to a system
mimic diagram, there is a status/
alarm panel and a section dedicated
to operator instructions and menus.
You benefit from improved operator
effectiveness, reduced training time,
and less chance of operator error.
The Key To High-Availability Power.
The Liebert STS2 Static Transfer Switch provides an
automatic, seamless transfer between the outputs of two
independent UPS systems and the input of a critical load in
a dual-bus power system. If the primary UPS should fail, the
switch will automatically transfer the loads to the surviving
UPS. For redundancy, the Liebert STS2 features three
separate, self-correcting logic modules. Each controller is
capable of working independently and each helps monitor
the other two. Available in capacities ranging from 100 up
to 1000 amps.
True Front-Access Design
All mechanical and electronic components of the
Liebert STS2 are accessible from the front of the unit. This
gives you several immediate benefits:
Greater freedom in system design. The Liebert STS2 can
be placed adjacent to or in back of other equipment. It
can also be placed against a wall or partition.
Simplified installation, with ample space for cable
connections through top and bottom access plates.
Less floor space required for maintenance access.
Simplified maintenance, with all key components
visible, serviceable and removable from the front of
the unit, without the need to shut down the connected
load.
44
Other Features Of The Liebert STS2:
True Internal Redundancy
Internal CANBUS protocol provides high-bandwidth
communication between system components via
twisted-pair cables. Options can be added as simple
network nodes.
Internal dual-bus control power.
Simplified installation and maintenance.
Full range of communications options to fit any
monitoring strategy.
Three-pole switch configurations.
Optimized Transfer option uses the patented Liebert
static transfer control algorithm to eliminate downstream
transformer inrush saturation. Meets CBEMA and ITIC
standard for critical loads.
The Liebert STS2 has triple-redundant logic. Each DSP
controller is capable of working independently, and
each helps monitor the other two. If one malfunctions,
the other two lock it out. Each controller has power
feeds from both power supplies.
The two power supplies feature true dual-bus power
distribution. Both have dual inputs, one from each
AC input source. All power connections have diode
protection, so that internal or external faults cannot
propagate. The result is a rugged, fault-resilient
package that is optimized for real-world applications.
Liebert STS2/PDU Static Transfer Switch/
Power Distribution Unit
With a single, space-saving unit, the Liebert STS2 Static Transfer
Switch/Power Distribution Unit combines the switching capabilities
of the STS2 with the benefits of a proven power distribution unit.
Liebert designed the STS2/PDU to bring you a distribution system
that will close the power delivery loop in your critical facility. It
offers the benefits of a custom-tailored power system, with the
convenience and cost savings of a pre-packaged, factory-tested unit.
Housed in a single, self-contained cabinet, it combines distribution,
computer-grade grounding, isolation, and power monitoring, as
well as dual-source switching, to provide the protection your vital
computer or communications equipment demands.
Available in capacities from 250 to 800 amps, the Liebert STS2/
PDU offers flexible expansion capabilities to fit growing sites. The
packaged system approach of the Liebert STS2/PDU is convenient
and space-saving, reducing installation time and cost compared to a
conventional approach using multiple interconnected components.
Features Of The Liebert STS2/PDU Include:
Power Distribution Systems
Combines Power Distribution And Automatic Switching.
True dual-bus power distribution switches
automatically or manually between two
AC power sources.
Computer-grade grounding automatically establishes
a single point ground to meet major manufacturers’
recommendations and the requirements of the
National Electric Code.
Fully compatible with the non-linear loads
of modern computer systems and other
electronic equipment.
Built-in metering and alarm annunciation with
communication to Liebert SiteScan® Web centralized
monitoring.
Compact single cabinet conserves valuable floorspace
compared to non-packaged solutions.
Single cabinet design reduces installation
time and cost.
The unit can be easily relocated to protect your
investment.
UL Listed as a Complete System to meet safety
requirements for fast, hassle-free inspection and
building code approvals.
A choice of distribution options to fit site
requirements.
Liebert Power Monitoring Capabilities
The operation of the Liebert STS2 and Liebert
STS2/PDU can be monitored using:
Liebert
Nform™ Monitoring System.
Liebert
SiteScan® Web Centralized
Monitoring System.
Liebert Universal Monitor and Remote
Power Monitor Panels.
Third-Party
Monitoring Systems.
For more information, see pages 52 and 53.
45
Liebert Power Systems Test Center
The Liebert Power Test Center for large
Test Capacity and Performance of Liebert Power Solutions
UPS systems is a state-of-the-art test
The Liebert Power Test Center for large UPS systems consists of multiple test
facility designed to provide customers with
stations in each of seven test bays. Testing is customized based on the complexity,
pre-installation testing of the performance,
size and number of UPS components in the configuration, but always includes
interoperability, and efficiency of Liebert
analysis of every module as well as the entire system. Module and system tests
power modules and systems under a variety
include:
of conditions. Located in Delaware, Ohio, the
41,000 square-foot facility, including a 2,600
square-foot customer observation suite, is
the largest and most comprehensive in the
industry.
Steady-state — 0% to 100% plus overload, unbalanced loading; non-linear loading
Dynamic — 0% to 100% step loads plus overload, unbalanced loading; non-linear
loading
Overload and faults — (>100%, 125%, 150%)
Plus other customer-specified special test requirements.
Testing includes individual UPS modules as
Testing on large Liebert UPS systems, may include UPS power modules, input and
well as the complete power system—including
output switchgear, power distribution units, static transfer switches, and battery
large UPS units such as the Liebert NXL UPS
cabinets.
and associated switchgear and ancillary
Test results certify the input and output, AC and DC characteristics of the system.
products—and is essential to the smooth,
rapid installation and commissioning of large
power systems. Customers leave the Liebert
Power Test Center with documented test
results and confidence that their complex
power system will operate seamlessly and in
accordance with business-critical availability
requirements.
46
Performance comparisons against specifications include, but are not limited to:
Voltage and waveform
Voltage regulation
Voltage and current harmonics
Frequency
Current and waveform
I/O power factor
Efficiency based on kW in and out
System switching, control and monitoring functionality
Enterprise UPS
Factory Witness Testing: View the Entire Testing Process
Factory Witness testing for large UPS systems is usually conducted over a
period of multiple days. During testing, customers and consulting engineers
may oversee the entire process from the Power Test Center observation suite
that overlooks the test bays or in the specific test bay itself. Multiple LCD
panels offer easy access to real-time test data, including waveforms, testing
procedures and results. Once testing is completed, a report of the results is
provided.
The Liebert Power Test Center features seven test bays, each containing
multiple test stations, where module and complete system analysis is
conducted in full view of the customer.
Benefits of Power System Testing:
Provides complete pre-installation testing of large
UPS systems and associated support equipment.
Tests the performance, interoperability and
efficiency of critical power systems.
Assures rapid installation and commissioning of
large UPS power systems.
Confirms the functionality of all subsystems.
Allows customers to document performance of
multi-module UPS systems prior to installation.
Optimizes the testing process with the use of the
latest agency standards.
Liebert Power Test Center Features:
Seven test bays, each containing multiple distinct test stations.
Power test viewing suite overlooking test bays and equipped with LCD panel
displays that offer easy access to relevant test data.
Results are provided at the conclusion of each test.
All I/O circuit breakers can be remotely controlled.
Voltage, current, frequency and watts monitored on all I/O circuit breakers.
Total power of >12 MW available via the facility utilities.
Higher capacities supported through a 1.75 MVA, 750 kVA, and 350 kVA
50/60 Hz engine generator as well as plug-ins for additional generators.
47
Power Quality Solutions
High Quality Surge Protection
For applications requiring protection from electrical line problems without the
These Products Include:
need for back-up capability, Liebert manufactures a full line of surge suppression
and power conditioning equipment.
High Exposure Systems
The Best Possible Power
Liebert’s wide range of Surge Protective Devices, (SPDs) have numerous
applications throughout a facility, including protection against transients
that are generated by other equipment within the building. Our power
conditioning systems shield critical loads from external disturbances,
particularly those coming through the utility power line.
Liebert SI Series (Interceptor II)—Built to
provide the highest level of surge current
capacity, with the lowest clamping voltages.
Along with true NEMA 4 assembly suitable for
outdoor use.
Liebert Power Protection Solutions Are Ideal For:
Liebert LM Series—Offers continuous
protection from damaging transients and
electrical line noise. Surge suppression levels
range from 120 kA to 500 kA per phase.
Computer Centers.
Facility-Wide Networks.
Telecommunications Centers.
Colocation Facilities.
Internet Data Centers.
Network Management Centers.
Medical Imaging Equipment.
Test And Laboratory Facilities.
Industrial Operations.
Liebert ACV Series (AccuVar)—A full line
of multi-phase, multi-mode distribution
panel-mounted surge suppression devices.
Liebert SH Series (Hybrid) - Liebert SH
Series (Hybrid) is the first hybrid product
in the industry to offer a true coordinated
multi-stage system of suppression.
Integrating the fast response time of the SAD
(Silicon Avalanche Diode) module with the
high-energy capability of the standard Liebert
Interceptor MOV (Metal Oxide Varistor)
modules. Surge current capacity ranges from
250 kA to 750 kA per phase.
Liebert ATF Series (Active Tracking Filter™)—
A customized, modular approach to surge
protection in a series filter device.
Liebert SS Series—Approved by Motorola
R56 Committee, Standards and Guidelines for
Communication Sites—Type 1 and 2 Devices.
Utilizes advanced SAD/MOV array technology
for industry leading transient suppression
voltages.
Liebert LPGE Series—An add-on device for
integration with panelboards at the jobsite for
enhanced surge suppression. Surge current
capacity levels range from 130 kA to 200 kA
per phase.
48
Emerson Network Power manufactures the industry’s
widest range of Surge Protective Devices (SPDs). These
SPDs are ideal for small facilities, large equipment
rooms or entire buildings, plus a wide range of power,
control and data line applications. Each surge protection
product features the rugged reliability that has been the
Liebert trademark for more than 40 years.
Installing protection at the electrical service entrance,
distribution points, branch panelboards and on specific
sensitive loads or equipment throughout your facility
is the best way to prevent damage and eliminate
associated downtime to sensitive microprocessor-based
electronics.
Data/Signal Line Protection
Islatrol™ SP-6TVN Series—The Islatrol
SP-6TVN is a surge suppressor/filtering
device that features uniquely designed
repositionable outlets and protects sensitive
home/office equipment including home
theaters, satellite dishes, computers,
printers and faxes.
Edco RM-CAT6 Series—Includes 16 and
48-channel high-speed data line protectors
that utilize three-stage hybrid technology.
These units address high-energy voltage
transients that can damage expensive
network equipment. Ideal for network
patch panels, switches and hubs, these
units mount easily in the same racks as the
equipment they are protecting.
Medium & Low
Exposure Systems
Edco PC642 Series—The Edco PC642 Series
surge suppressor is a two-pair (four-wire)
module implementing three-stage hybrid
technology. This module addresses over-voltage transients with gas tubes and
silicon avalanche components.
PowerSure LPL & LPM Series—surge
suppression systems protect connected
equipment against electric power line
disturbances and transients in medium and
low exposure locations. Displays LED status
indication. Provides remote indication
capabilities.
Islatrol ™ RM Series—This line of AC surge
protectors is ideal for protecting the power
feeding valuable rack equipment. This series
provides 40,000 Amps of surge protection
and up to 60 dB of high- frequency noise
filtering.
Surge Protection And Power Conditioning Systems
Home and Office Protection
Edco LCDP Series—The Edco LCDP Series
is designed to conveniently protect 8 wire,
low voltage data circuits and employs two
RJ-45 jacks for easy installation.
Edco RJA-RJD Series—The Edco
RJA and Edco RJD Series are four pair
telephone/data line protectors that
implement advanced two stage
hybrid design.
Edco CAT6-5 POE Series—The Edco
CAT6-POE Series is designed to work
on Category 5 Power-Over-Ethernet
transmission lines as well as CAT 6
applications.
Edco PHC Series—This surge suppressor
is designed to protect two pairs of wires
specifically for alarm and security systems
where operating currents can be as high
as 5 Amps. It utilizes three-stage hybrid
technology to address overvoltage
transients and sneak and fault current
for signaling circuits.
49
Powerful Solutions
For Critical Data And Telecom Applications
From major switching and data centers to remote shelters and computer
rooms, Emerson Network Power -48V DC power systems have the features and
proven performance to match your network application needs.
Visit: EmersonNetworkPower.com/DCPower
NetSure® ITM Features
High system efficiency: Reduced
end-to-end power conversion stages
combined with efficient power
conversion units (PCUs) and an
advanced energy optimization mode
enable significant energy savings even
at low loads.
Scalability and ease of deployment:
Minimize your initial investment and
avoid stranded power by adding
expansion DC UPS modules without
interruption in the field as power needs
increase.
DC architecture simplicity: Fewer
components, conversion stages and
distribution breakers throughout
the power chain ensure high
availability; elimination of complex
synchronization circuits and the need to
de-rate capacity for phase balancing or
harmonics makes it easy to engineer.
Energy Optimization Mode
Intelligent Power Matching Achieves near-peak UPS efficiency
down to 5% system load by optimizing
individual PCU performance, greatly
reducing energy costs over time in
real world conditions
DC UPS
400/480V AC 3-Phase Input
Integrates AC to DC power conversion,
battery backup and branch
distribution into a compact, highly
reliable power protection system for
data center applications.
NetSure® ITM
The NetSure® ITM lowers the cost of
data center design, operation and
management. This 48V direct current
solution is a row-based DC UPS that
delivers simple, scalable and highly
efficient power protection in 70kW
modules. Up to four DC UPS modules
can be installed together for 280kW of
total power.
The NetSure® ITM is deployed directly
on the server room floor, providing
protected 48V power to nearby
equipment racks. This preserves the
efficiency and reliability benefits of
DC power, minimizes the amount of
copper required, and enables modular
growth.
NetSure® ITM 140kW, Two Module System
NetSure® rectifiers or power conversion units (PCUs) convert 3 phase 400/480V AC to
-48V DC and are the heart of the NetSure® ITM. Each DC UPS module includes twelve
independent 5.8kW PCUs. Each DC UPS module is factory integrated with distribution
and battery backup. 48V branch distribution via 22 circuit breakers (6 fuses optional);
5-10 minutes of battery backup is provided across three parallel 48V battery strings.
48V DC Rack Power Distribution
NetSure® RDB Series
Deploy DC power in your rack with zero U, rear mount power distribution units (PDUs)
to maximize rack space available for revenue generating equipment. Featuring plugand-play connectors for simple field operation, NetSure® RDB 48V Rack Distribution
Units are designed for ultimate ease of use.
With a maximum load capacity of 8.4 kW for each PDU and various output breaker sizes
available, the NetSure® RDB Series is provisioned to optimize the wire size required to
each device. This allows for easy pre-configuration and management as no special tools
are required to maintain or move IT equipment.
50
50
As the next step in the evolution of the
NetSure® DC Power platform, eSure™ high-efficiency rectifiers
from Emerson offer superior performance and uncompromised
reliability, delivering efficiency levels near 97%.
eSure™ technology delivers Efficiency Without Compromise™.
Small DC Power Systems
120 / 240VAC Single Phase Input
Power systems for data center and central office
applications, including wireline and wireless switching,
transmission, data routing and large telecom hotels.
Highly reliable, uninterruptible and cost-effective power systems
for small data or telecom installations.
NetSure® 502
The NetSure® 502 is a flexible system
capable of providing DC power through
the use of 2000W standard or highefficiency eSure™ rectifiers, an SCU+
controller, and a variety of outputdistribution options.
Mini DC Power Systems
120 VAC or 220/240VAC Single Feed Input
High-density mini-sized DC power solutions for outside plant
enclosure, central office or embedded applications.
NetSure® 801
The NetSure® 801 highdensity power system offers
the increased flexibility of a
cabled plant in a centralized or
distributed architecture.
NetSure® 802
Integrated -48VDC 3-phase
rectifiers, distribution, control
and monitoring in a single
frame. Expandable to 10,000
amps with additional frames.
Medium DC Power Systems
240VAC Single Phase Input
NetSure® 211
This DC power solution offers 1RU and
2RU configurations, combining reliable
NetSure® rectifiers with an advanced
Ethernet-accessible controller for mini power applications.
DC Power Distribution Equipment
Custom designed or standard enclosures available for all types
of data and telecom equipment.
Modular, flexible design for switching, wireless base stations,
transmission, LAN, WAN and other networking operations.
LORAIN® DB 48500
This modular system
provides effective secondary
load distribution for single or
multiple -48VDC feeds.
NetSure® 801 DB
Battery Distribution Fuse/
Circuit Breaker Bay featuring
high capacity, front access,
modularity, and simplified
installation to effectively
provide secondary load
distribution and protection
for multiple -48 VDC feeds
up to 600 amps.
DC to AC Inverter Systems
120VAC and 230 VAC Single Phase Output
Ideal for a data center, wireless switching, or central office
environment where flexible expansion capabilities are required.
NetSure® 700
The NetSure® 700
power system with
2500 watt or 3000
watt rectifiers and
1500 watt converters
is a modular power
system providing
up to 4,000 amps of
power at +24VDC and
400 amps at -48VDC.
NetSure® 701
Modular power
system providing
up to 4,000
amps of power at
-48VDC with 3200
watt standard or
high-efficiency
eSure™ rectifiers.
NetSure® 702
Combines the
advantages of the
smaller 3200 watt
standard and highefficiency eSure™
rectifiers from the
NetSure® 701 system
with the controller
capability and plant
architecture of the
NetSure® 801 system.
Enclosure Solutions
Custom designed or standard enclosures available for all types of
data and telecom equipment.
Batteries & Accessories
Products frequently used together with DC power systems
including batteries, battery strands, battery trays, bus covers,
assorted panels, circuit breakers and much more.
51
DC Power Systems
Large DC Power Systems
208/480VAC 3-Phase Input
Power System Monitoring:
The Key To Continuous Operation
What You Don’t Know Can Hurt You.
A small problem in a critical facility can quickly
escalate into a disaster—knowing what is happening
with your power equipment, so you can keep that
protective “envelope” at peak operating efficiency,
is vital to system reliability.
Different People Need To Know
Different Things.
Liebert offers you more monitoring solutions than
anyone else because getting the right information
about your power equipment to the right people,
with the right level of urgency, is so important to
system availability.
We do this by allowing you to receive and use
information from your Liebert power equipment’s
microprocessor controls–no matter where it is located
or what communications protocol, operating platform
or building management system is being used.
In-band, out-of-band and web-based monitoring are
all available. From enterprise monitoring systems
to individual pieces of communications hardware,
you will know the exact problem so that you can
implement the right solution.
52
How Deep Does Your Monitoring
Need To Be?
Monitoring can range from a automated shutdown
software that provides basic operating information
from a single UPS unit, all the way to full-scale
monitoring and control of a critical facility including
trending and data analysis.
Your requirements will vary according to the specificity
of the information you need. You may require no more
than a local readout of a unit’s operating status. Or you
may need the ability to control its operation and
receive alarms.
These information requirements may also go beyond
basic monitoring and control. You may need the ability
to analyze performance data in order to pinpoint
trouble spots so that the same problems don’t
happen again and again.
Maximizing Your Investment Through System Monitoring
Centralized Management with
Liebert Nform®Software
Enterprise Management with
Liebert SiteScan® Web Software
For enhanced remote communications
and control of your Liebert units,
the Liebert IntelliSlot Web and 485 Cards deliver the communication
capabilities you require.
As business grows, your critical
equipment infrastructure will
expand, thus the need for centralized
management of this equipment will be
key to your business success.
Monitoring and control through your
existing Network with no additional
software required.
Connecting to equipment in the
distributed critical space is only part of
the monitoring challenge.
For customers who require extensive
management of critical system
equipment that may span multiple
locations in an ever-moving global
enterprise, Liebert SiteScan Web
will centrally manage your critical
equipment and give you the power
to move beyond the event-responsive
service paradigm.
Each Liebert system equipped with a
Liebert IntelliSlot Web Card takes full
advantage of your Ethernet network,
allowing remote monitoring from your
computer desktop, network operations
center or wherever network access is
permitted, without the need for front-end software.
Liebert Nform leverages the
network connectivity capabilities
of your Liebert equipment to provide a centralized monitoring view of your
distributed equipment.
Monitoring integration with
your existing Building
Management System.
A Liebert system equipped with a Liebert
IntelliSlot™ 485 Card can be seamlessly
integrated with your existing Building
Management System.
Liebert IntelliSlot Web
Utilizing the SNMP and Web
technologies built into each of the
Liebert IntelliSlot communication cards,
Liebert Nform will centrally manage
alarm notifications to provide you with
an easy interface to access critical status
information. Liebert Nform puts critical
systems information at the fingertips of
support personnel—wherever they are—
increasing responsiveness to alarm-event conditions, thus allowing IT organizations to maximize their system availability.
Monitoring And Control
Distributed Management with
Liebert IntelliSlot Interface Cards
Liebert SiteScan Web does it all:
Real-Time Monitoring and Control.
Event Management and Reporting.
Data Analysis and Trending.
Building Management Integration.
Liebert SiteScan Web is a comprehensive
critical systems management solution
dedicated to ensuring reliability through
graphics, event management and
data extrapolation. The standard Web
interface allows users easy access from
anywhere at anytime.
Single and multi-site applications.
Event management and unit control.
Trend and historical data captures
and reporting.
Full ASHRAE BACnet compatibility.
Java based.
Windows 2000, XP and 2003
compatible.
Liebert Nform
Liebert SiteScan Web
53
Liebert Services
Complete Start-Up And Preventive Maintenance Services
Peace of mind. It’s confidence you’ve done everything possible
Confident Customers. Satisfied Customers.
to assure system uptime. It’s confidence the power systems
You know them. They’re confident because they
know their systems will be available when they need them. So, they’re satisfied customers—and,
they’re probably ours. 99% of our customers are
satisfied with the service we provide. In fact, 96%
of them would recommend us to someone else (source: MRSI).
you rely on are operating at peak performance. It’s confidence
you’ve selected the best partner available to bring you back
online in the event of unexpected downtime.
­­­­­­
Complete
confidence. When it comes to selecting a
service organization to maintain your critical power
systems, you can only have complete confidence that
Emerson Network Power Liebert Services can deliver:
Proprietary Tools Deliver Uptime
Ensuring peak operating performance of your
equipment comes down to having knowledgeable
Field Technicians in your facility with the most
current tools available to do the job. Only Emerson
Network Power Field Technicians have access to
the proprietary tools needed to ensure system
uptime—firmware upgrades, factory engineering
specifications, access to Liebert product and
application engineers and R&D. No one else can bring this to your organization.
Real uptime assurance. We have the proprietary
tools, industry knowledge and robust service
infrastructure to deliver real assurance that your systems will be available when you need them.
Efficient downtime recovery. After all, if downtime
strikes, you need a partner that can get you back
online quickly with intelligent answers, rapid service
response and parts where and when you need them.
The Business Case For Regular Maintenance
60x Increase in MTBF
Regular OEM preventive maintenance increases the mean
time between failures (MTBF).
51x
50x
Increase in
Mean Time
Between
Failures1
For instance, the mean time between failures for a system
that receives 1 annual PM is 10 times greater than a system
that receives 0 PMs.
37x
40x
30x
By contrast, a system that receives 4 annual PMs, as
opposed to 0 PMs, increases its duration between failures
by 51 times.
23x
20x
10x
10x
1x
0
54
1
2
3
4
Number of Annual Preventive Maintenance Visits
1
Data is based on Mean Time Between Failure analysis for
three phase UPS systems (≥ 100kVA) with an Emerson
Network Power service agreement between 2002-2007.
Servicing All Your Critical Power Equipment
Your investment in power equipment is worthless if you don’t maintain it.
Not even the best equipment can function properly unless it’s serviced with a
regular maintenance schedule.
Emerson Network Power services
the complete spectrum of UPS, batteries and related power distribution equipment in your data
center or in other critical facilities
where continuous availability of systems is essential.
The Power Equipment
We Service Includes:
All UPS and Batteries.
Automatic Transfer Switch.
Static Transfer Switch.
System Control Cabinets.
PDUs.
Bypass Cabinets.
Power Conditioning & Distribution.
Emerson Network Power’s Liebert Services Business
Your power equipment functions as a complete system. Shouldn’t your service provider?
Only Emerson Network Power has the expertise and experience to service your entire power
infrastructure and all its components—from utility to rack.
Generator
Automatic
Transfer
Switch
TVSS
SwitchGear
UPS Batteries
Power Availability
Availability depends
on the continuity of
power and the ability
of an uninterruptible
electrical supply to ride
through outages of
any duration.
Power Protection
Raw utility power
may be unsuitable for
sensitive technology
systems. In these
situations, surge
suppression and
power conditioning
can deliver the power
quality you need.
Static
Remote
TransferDistribution
Switch
Cabinet
Racks
Power Conversion/Distribution
Converting and delivering power
throughout a large facility or a
small space is an important step
in protecting availability.
55
Ensuring The High Availability Of
Mission-Critical Data And Applications.
Emerson Network Power, a business of Emerson (NYSE:EMR), is the global leader
in enabling Business- Critical Continuity™ from grid to chip for telecommunication
networks, data centers, health care and industrial facilities. Emerson Network Power
provides innovative solutions and expertise in areas including AC and DC power and
precision cooling systems, embedded computing and power, integrated racks and
enclosures, power switching and controls, monitoring, and connectivity. All solutions
are supported globally by local Emerson Network Power service technicians. Liebert
AC power, precision cooling and monitoring products and services from Emerson
Network Power deliver Efficiency Without Compromise™ by helping customers
optimize their data center infrastructure to reduce costs and deliver high availability.
Emerson Network Power
Liebert Corporation
World Headquarters
1050 Dearborn Drive
P.O. Box 29186
Columbus, Ohio 43229
United States Of America
800 877 9222 Phone (U.S. & Canada Only)
614 888 0246 Phone (Outside U.S.)
614 841 6022 FAX
Emerson Network Power
European Headquarters
Via Leonardo Da Vinci 8
Zona Industriale Tognana
35028 Piove Di Sacco (PD)
Italy
39 049 9719 111 Phone
39 049 5841 257 FAX
Emerson Network Power Asia Pacific
29/F, The Orient Square Building
F. Ortigas Jr. Road, Ortigas Center
Pasig City 1605
Philippines
+63 2 687 6615
+63 2 730 9572 FAX
liebert.com
24 x 7 Tech Support
800 222 5877 Phone
614 841 6755 (outside U.S.)
While every precaution has been taken to ensure accuracy and
completeness in this literature, Liebert Corporation assumes no
responsibility, and disclaims all liability for damages resulting
from use of this information or for any errors or omissions.
© 2011 Liebert Corporation. All rights reserved throughout
the world. Specifications subject to change without notice.
All names referred to are trademarks or registered trademarks
of their respective owners.
® Liebert is a registered trademark of the Liebert Corporation.
SL-70100 (R06/11)
Emerson Network Power.
The global leader in enabling Business-Critical Continuity™.
Printed in USA
EmersonNetworkPower.com
AC Power
Embedded Computing
Outside Plant
Racks & Integrated Cabinets
Connectivity
Embedded Power
Power Switching & Controls
DC Power
Monitoring
Precision Cooling
Services
Surge Protection
Business-Critical Continuity, Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co.
©2011 Emerson Electric Co.