Variable Frequency Drives
A700
FUNCTION / PERFORMANCE
A700
1/4 - 800 Hp
F700
F700
E700
E700
RUN
1 - 1000 Hp
1/8 - 20 Hp
STOP
RESET
E560
E500
RUN
MODE
D700
1 - 10 Hp
STOP
RESET
SET
PU
EXT
D700
1/8 - 20 Hp
CAPACITY
Family Overview................................................................................................................................338
D700 Series......................................................................................................................................339
E700 Series.......................................................................................................................................345
E560 Series.......................................................................................................................................351
F700 Series.......................................................................................................................................354
A700 Series.......................................................................................................................................364
A701 Series......................................................................................................................................375
V500 Series......................................................................................................................................379
Packaged Drives...............................................................................................................................383
General Options................................................................................................................................389
Stock Product: Stock product is product MEAU makes every effort to have on hand for immediate shipment. There may be instances
when we are out of stock due to unexpected large requirements. All stock product will be indicated in this book by an “S” in the
Stocked Item columns/rows.
Non-Stock Product: Non-stock product is product supplied on an “as-needed” basis. Standard lead times of 12 - 16 weeks apply,
product is non-returnable and non-cancelable. Product listed as non-stock may change to stock product subject to increases in sales
and usage. All non-stock product will be indicated in this book by a dash “-” in the Stocked Item columns/rows.
Mitsubishi Electric Automation
|
Variable Frequency Drives 337
Standard Features:
• RS-485 serial communications
(Mitsubishi VFD protocol)
• PID control
• Adjustable carrier frequency (Low Noise)
up to 14.5kHz
Model Series
Outputs
Inputs
Control Algorithm
HP
Range
Voltage Range (VAC)
Constant Torque
Variable Torque
•
•
•
Soft PWM
Packaged solutions available
Setup Software available
User selectable Sink (default) / Source I/O
D700
115 1Ø
1/8~1
240 1Ø
E560
240
1/8~3
1/8~20
480
1/2~20
600
1~10
E700
115 1Ø
1/8~1
240 1Ø
F700
240
1/8~3
1/8~20
480
1/2~20
240
A700
480
1~200
1~1000
240
480
1/2~125 1/2~800
1~200
1~1000
Open-Loop Flux
Vector Speed
Yes
Yes
Yes
No
Yes
Open-Loop Torque
No
No
No
No
Yes
Closed-Loop Speed
No
No
No
No
Yes
Closed-Loop Torque
No
No
No
No
Yes
Closed-Loop Position
600
1~650
2~850
No
No
No
No
Yes
Digital Inputs
5 (2 additional for Safety)
7
7 (expandable)
12 (expandable)
12 (expandable)
0~5 / 10VDC
Yes
Yes
Yes
No
No
0~±5 / ±10VDC
No
No
No
Yes
Yes
4~20mA
No
Yes
No
No
No
4~20mA or 0~5/10VDC
Yes
No
Yes
Yes (2 ports)
Yes (2 ports)
Pulse (Speed)
No
No
No
No
Yes
Digital Outputs
1
2
2 (expandable)
5 (expandable)
5 (expandable)
Relay Outputs
1
1
1 (expandable)
2 (expandable)
2 (expandable)
Yes
Yes
Yes
Yes
Yes (expandable)
(optional)
0~10VDC
0~20mA
No
No
No
Yes
Pulse
No
No
No
No
Yes
Standard
No
Standard
Standard
Standard
CC-Link
No
Option
Option
Option
Option
DeviceNet
No
Option
Option
Option
Option
Profibus-DP
No
Option
Option
Option
Option
LonWorks
No
Option
Option
Option
Option
SSCNETIII
No
No
No
No
Option
ControlNET
No
No
No
No
Option
Metasys N2
Option
Option
Option
Option
Option
Siemens FLN
Option
Option
Option
Option
Option
BACnet/MSTP
Option
Option
Option
Option
Option
Ethernet I/P
Option
Option
Option
Option
Option (2 types)
Modbus TCP/IP
Option
Option
Option
Option
Option
No
No
Option
Option
Option
Yes (1/2HP and above)
Yes
Yes (1/2HP and above)
No
Up to 30HP
Option
Option
Option
No
Up to 10HP
Standard
Standard
Modbus RTU
Communications
n VARIABLE FREQUENCY DRIVES
Variable Frequency Drives Family
BACnet/IP
Brake Transistor
Brake Resistor
Up to
5HP
No
EMC Filter
Option
No
Option
DC Reactor
Option
No
Option
Safety Stop Function
Standard
Option
No
No
Communications Ports
1 (RS485)
2 (RS485 & USB)
2 (RS485)
3 (2xRS485 & USB)
0
No
1
(RS485)
1
1
1
3
Operator Interface
Standard
Option
Standard
Standard
Standard
Alpha/Numeric Keypad Option
FR-PU07
FR-PU04
FR-PU07
FR-PU07
FR-PU07
Last 8
Last 8
Last 8
Last 8
Last 8
Plug-in Option Ports
Alarm History
338
Option (standard 100HP and above)
D700 Series
Low Cost Micro VFD with Mitsubishi Electric Quality.
• Simple to Use: The D700 is perfect for a wide range
of applications
• Simple to Set Up: The integrated digital setting dial
with display makes configuration fast and easy
• Simple Operation: Control remotely or with the
built-in digital control
• Simple to Choose: Low cost and with Mitsubishi
Electric quality ensuring long operation life
• Increased capacity from 1/8 to 20 HP
• Safety Stop function meets EN954-1 Category 3 and
IEC60204-1 Stop Category 0
• Integrated brake chopper circuit
• Modbus RTU included as standard via the RJ45 port
• 150% torque at 1Hz and 200% torque at 3Hz using
General-purpose Magnetic Flux Vector Control
• Optimum Excitation Control for increased energy
savings when motor is not loaded
• Frequency Search Function for catching a
spinning load
• Dancer Control allows position signal to control
roll tension
• Password Function for parameter setting protection
• RoHS compliant
• 10 year maintenance free design
Voltage
FR-D720 – 008 – NA
Symbol
D710W
D720S
D720
D740
Voltage Class
Single-phase 115V class
Single-phase 240V class
Three-phase 240V class
Three-phase 480V class
Inverter capacity
amperage / 10
(008 = 0.8A
output)
115
1 Phase
1/8 – 1 Hp
240
1 Phase
1/8 – 3 Hp
240
3 Phase
1/8 – 20 Hp
480
3 Phase
1/4 – 20 Hp
Horsepower
D700 Series
HP
Rating (CT & VT)
Rated Amps
1/8
1/4
1/2
1
0.8
1.4
2.5
4.2
1/8
1/4
1/2
1
2
3
0.8
1.4
2.5
4.2
7
10
1/8
1/4
1/2
1
2
3
5
7 1/2
10
15
20
0.8
1.4
2.5
4.2
7
10
16.5
23.8
31.8
45
58
1/2
1
2
3
5
7 1/2
10
15
20
1.2
2.2
3.6
5
8
12
16
23
29.5
IP20 Open Chassis
Dimensions in inches (mm)
Model Number
Height
Width
Depth
1-Phase 100~120VAC Input / 3-Phase 200~240VAC Output
FR-D710W-008-NA
5.0 (128)
2.7 (68)
3.2 (80.5)
FR-D710W-014-NA
5.0 (128)
2.7 (68)
4.4 (110.5)
FR-D710W-025-NA
5.0 (128)
2.7 (68)
5.6 (142.5)
FR-D710W-042-NA
5.0 (128)
4.3 (108)
5.9 (149.5)
1-Phase 200~240VAC Input / 3-Phase 200~240VAC Output
FR-D720S-008-NA
5.0 (128)
2.7 (68)
3.2 (80.5)
FR-D720S-014-NA
5.0 (128)
2.7 (68)
3.2 (80.5)
FR-D720S-025-NA
5.0 (128)
2.7 (68)
5.6 (142.5)
FR-D720S-042-NA
5.0 (128)
2.7 (68)
6.5 (162.5)
FR-D720S-070-NA
5.0 (128)
4.3 (108)
6.2 (155.5)
FR-D720S-100-NA
5.9 (150)
5.5 (140)
5.7 (145)
3-Phase 200~240VAC Input & Output
FR-D720-008-NA
5.0 (128)
2.7 (68)
3.2 (80.5)
FR-D720-014-NA
5.0 (128)
2.7 (68)
3.2 (80.5)
FR-D720-025-NA
5.0 (128)
2.7 (68)
4.5 (112.5)
FR-D720-042-NA
5.0 (128)
2.7 (68)
5.3 (132.5)
FR-D720-070-NA
5.0 (128)
4.3 (108)
5.4 (135.5)
FR-D720-100-NA
5.0 (128)
4.3 (108)
5.4 (135.5)
FR-D720-165-NA
5.0 (128)
6.7 (170)
5.6 (142.5)
FR-D720-238-NA
5.9 (150)
8.7 (220)
6.1 (155)
FR-D720-318-NA
5.9 (150)
8.7 (220)
6.1 (155)
FR-D720-450-NA
10.3 (260)
8.7 (220)
7.5 (190)
FR-D720-580-NA
10.3 (260)
8.7 (220)
7.5 (190)
3-Phase 380~480VAC Input & Output
FR-D740-012-NA
5.0 (128)
4.3 (108)
5.1 (129.5)
FR-D740-022-NA
5.0 (128)
4.3 (108)
5.1 (129.5)
FR-D740-036-NA
5.0 (128)
4.3 (108)
5.4 (135.5)
FR-D740-050-NA
5.0 (128)
4.3 (108)
6.2 (155.5)
FR-D740-080-NA
5.0 (128)
4.3 (108)
6.6 (165.5)
FR-D740-120-NA
5.9 (150)
8.7 (220)
6.1 (155)
FR-D740-160-NA
5.9 (150)
8.7 (220)
6.1 (155)
FR-D740-230-NA
10.3 (260)
8.7 (220)
7.5 (190)
FR-D740-295-NA
10.3 (260)
8.7 (220)
7.5 (190)
Mitsubishi Electric Automation
Weight Lbs (kg)
Stocked Item
1.1 (0.5)
1.3 (0.6)
2.0 (0.9)
3.1 (1.4)
S
S
S
S
1.1 (0.5)
1.3 (0.6)
2.0 (0.9)
2.5 (1.1)
3.3 (1.5)
4.4 (2.0)
S
S
S
S
S
S
1.1 (0.5)
1.1 (0.5)
1.8 (0.8)
2.2 (1.0)
3.1 (1.4)
3.1 (1.4)
4.0 (1.8)
8.0 (3.6)
8.0 (3.6)
14.3 (6.5)
14.3 (6.5)
S
S
S
S
S
S
S
S
S
S
S
2.9 (1.3)
2.9 (1.3)
3.1 (1.4)
3.3 (1.5)
3.3 (1.5)
7.3 (3.3)
7.3 (3.3)
14.3 (6.5)
14.3 (6.5)
S
S
S
S
S
S
S
S
S
|
Variable Frequency Drives 339
Soft-PWM control/high carrier frequency PWM control (V/F control, General-purpose magnetic flux vector control, Optimum excitation
control can be selected)
Control Method
Control Specifications
Output Frequency Range
Frequency Setting
Resolution
0.06Hz/60Hz (terminal2, 4: 0 to 10V/10bit) 0.12Hz/60Hz (terminal2, 4: 0 to 5V/9bit) 0.06Hz/60Hz (terminal4: 0 to 20mA/10bit)
Digital Input
0.01Hz
Frequency
Accuracy
Analog Input
Within ±1% of the max. output frequency (25°C ±10°C)
Digital Input
Within 0.01% of the set output frequency
Voltage/Frequency Characteristics
Base frequency can be set from 0 to 400Hz. Constant torque/variable torque pattern can be selected
Starting Torque
150% or more (at 1Hz) when General-purpose magnetic flux vector control and slip compensation is set
Torque Boost
Manual torque boost
Accel. /Decel. Time Setting
0.01 to 3600s (acceleration and deceleration can be set individually), linear or S-pattern acceleration/deceleration mode can be selected.
FR-D720-008 and 014, FR-D720S-008 and 014, FR-D710W-008 and 014 ... 150%, FR-D720-025 and 042, FR-D740-012 and 022,
FR-D720S-025 and 042, FR-D710W-025 and 042 ... 100%, FR-D720-070, FR-D740-036, FR-D720S-070 ... 50%, FR-D720-100 or
more, FR-D740-050 or more, FR-D720S-100 ... 20%
Regeneration
(*1)
DC Injection
Brake
Stall Prevention Operation Level
Frequency Setting
Signal
Digital Input
Entered from operation panel and parameter unit. Frequency setting increments is selectable.
Forward and reverse rotation or start signal automatic self-holding input (3-wire input) can be selected.
Operational Functions
Output Signal
Operation Specifications
Operation current level can be set (0 to 200% adjustable), whether to use the function or not can be selected
Two points
Terminal 2: 0 to 10V, 0 to 5V can be selected
Terminal 4: 0 to 10V, 0 to 5V, 4 to 20mA can be selected
Input Signal
Output Signal
Points
Operation frequency (0 to 120Hz), operation time (0 to 10s), operation voltage (0 to 30%) variable
Analog Input
Start Signal
Open Collector
Output
Relay Output
Five points. You can select from among multi-speed selection, remote setting, second function selection, terminal 4 input selection,
JOG operation selection, PID control valid terminal, external thermal input, PU-external operation switchover, V/F switchover, output
stop, start self-holding selection, forward rotation, reverse rotation command, inverter reset, PU-NET operation switchover, externalNET operation switchover, command source switchover, inverter operation enable signal, and PU operation external interlock
Maximum/minimum frequency setting, frequency jump operation, external thermal relay input selection, automatic restart after
instantaneous power failure operation, forward/reverse rotation prevention, remote setting, second function, multi-speed operation,
regeneration avoidance, slip compensation, operation mode selection, offline auto tuning function, PID control, computer link
operation (RS-485), Optimum excitation control, power failure stop, speed smoothing control, Modbus-RTU
One point
One point
Operating Status
You can select from among inverter operation, up-to-frequency, overload alarm, output frequency detection, regenerative brake
prealarm, electronic thermal relay function prealarm, inverter operation ready, output current detection, zero current detection, PID
lower limit, PID upper limit, PID forward/reverse rotation output, fan alarm (*3), heatsink overheat pre-alarm, deceleration at an
instantaneous power failure, PID control activated, PID output interruption, during retry, life alarm, current average value monitor,
remote output, alarm output, fault output, fault output 3, and maintenance timer alarm
For Meter
Output Points
0 to 10VDC: one point
Analog Output
You can select from among output frequency, output current (steady), output voltage, frequency setting, converter output voltage,
regenerative brake duty, electronic thermal relay function load factor, output current peak value, converter output voltage peak value,
reference voltage output, motor load factor, PID set point, PID measured value, output power, PID deviation, motor thermal load
factor, inverter thermal load factor 0 to 10VDC
For Meter
Indication
0.2 to 400Hz
Analog Input
Braking Torque
Operation Panel
Parameter Unit
(FR-PU07)
Additional Display
By The Parameter
Unit (FR-PU04/
FR-PU07) Only
Operating Status
You can select from among output frequency, output current (steady), output voltage, frequency setting, cumulative energization time,
actual operation time, converter output voltage, regenerative brake duty, electronic thermal relay function load factor, output current
peak value, converter output voltage peak value, motor load factor, PID set point, PID measured value, PID deviation, inverter I/O
terminal monitor, output power, cumulative power, motor thermal load factor, inverter thermal load factor, PTC thermistor resistance.
Fault Definition
Fault definition is displayed when the fault occurs and the past 8 fault definitions (output voltage/current/frequency/cumulative
energization time right before the fault occurs) are stored
Operating Status Not used
Fault Definition
Interactive
Guidance
Output voltage/current/frequency/cumulative energization time immediately before the fault occurs
Function (help) for operation guide
Surrounding Air Temperature
Overcurrent during acceleration, overcurrent during constant speed, overcurrent during deceleration, overvoltage during acceleration,
overvoltage during constant speed, overvoltage during deceleration, inverter protection thermal operation, motor protection thermal
operation, heatsink overheat, input phase loss (*5, *6), output side earth (ground) fault overcurrent at start (*5), output phase loss,
external thermal relay operation (*5), PTC thermistor operation (*5), parameter error, PU disconnection, retry count excess (*5), CPU
fault, brake transistor alarm, inrush resistance overheat, analog input error, stall prevention operation, output current detection value
exceeded (*5), safety circuit fault
Fan alarm (*3), overcurrent stall prevention, overvoltage stall prevention, PU stop, parameter write error, regenerative brake prealarm
(*5), electronic thermal relay function prealarm, maintenance output (*5), undervoltage, operation panel lock, password locked,
inverter reset, safety stop
-10°C to +50°C (14°F to 122°F) (non-freezing) (*4)
Ambient Humidity
90%RH maximum (non-condensing)
Storage Temperature (*2)
-20°C to +65°C (-4°F to 149°F)
Atmosphere
Indoors (without corrosive gas, flammable gas, oil mist, dust and dirt, etc.)
Altitude/Vibration
Maximum 1000m (3280.80 feet) above sea level, 5.9m/s2 or less at 10 to 55Hz (directions of X, Y, Z axes)
Protective Functions
Warning Functions
Environment
n VARIABLE FREQUENCY DRIVES
D700 General Specifications
Notes:
1. The braking torque indicated is a short-duration average torque (which varies with motor loss) when the motor alone is decelerated from 60Hz in the shortest time and is not a continuous regenerative
torque. When the motor is decelerated from the frequency higher than the base frequency, the average deceleration torque will reduce. Since the inverter does not contain a brake resistor, use the
optional brake resistor when regenerative energy is large. A brake unit (FR-BU2) may also be used.
2. Temperatures applicable for a short time, e.g. in transit.
3. As the FR-D720-042 or less, FR-D740-022 or less, FR-D720S-042 or less, FR-D710W-042 or less are not provided with the cooling fan, this alarm does not function.
4. When using the inverters at the surrounding air temperature of 40°C (104°F) or less, the inverters can be installed closely attached (0cm clearance).
5. This protective function does not function in the initial status.
6. This protective function is available with the three-phase power input specification model only.
340
D700 Series Terminal Connection Diagram
*1. DC reactor (FR-HEL)
When connecting a DC reactor, remove the
jumper across P1-P/+
Single-phase 100V power input model is not
compatible with DC reactor.
Sink logic
Main circuit terminal
Control circuit terminal
Single-phase power input
MCCB
Brake unit
(Option)
MC
Single-phase
AC power
supply
R/L1
S/L2
*1
*8
PR N/*7
P/+
Jumper
MCCB
P1
*6
MC
R/L1
S/L2
T/L3
Three-phase
AC power
supply
*7 A brake transistor is not built-in to the
FR-D720-008, 014 and FR-D720S-008,
014 and FR-D710W-008, 014.
*8 Brake resistor (FR-ABR, MRS type, MYS
type)
Install a thermal relay to prevent an
overheat and burnout of the brake resistor.
(The brake resistor can not be connected
to the FR-D720-008, 014 and FR-D720S008, 014 and FR-D710W-008, 014.)
R
Earth
(Ground)
*6 Terminal P1 is not available for singlephase 100V power input model.
U
Inrush current
limit circuit
Motor
V
W
IM
Main circuit
Earth
(Ground)
Earth (Ground)
Control circuit
short across terminals
PC-SD.
Contact input common
24VDC power supply
Relay output
C
STF
B
STR
Relay output
(Fault output)
A
RH
RM
SD
RUN
SINK
RL
Terminal functions vary
by Pr. 192 A,B,C terminal
function selection
Open collector output
SOURCE
Control input signals (No voltage input allowed)
Forward
Terminal functions vary rotation start
with the input terminal Reverse
assignment (Pr. 178 to rotation start
Pr. 182)
High
speed
Multi-speed selection Middle
speed
*2 When using terminals PCLow
SD as a 24VDC power
speed
supply, take care not to
Running
Terminal functions vary by
Pr. 190 RUN terminal function
selection
24V
Open collector output common
Sink/source common
SE
PC *2
(Common for external power supply transistor)
Frequency setting signals (Analog)
*3 Terminal input specifications
can be changed by analog
input specifications
switchover (Pr. 73).
Terminal 10 and terminal 2
are used as PTC input
terminal (Pr. 561).
*4 Terminal input
specifications can be
changed by analog input
specifications switchover
(Pr. 267). Set the
voltage/current input
switch in the "V" position
to select voltage input (0
to 5V/0 to10V) and "I"
(initial value) to select
current input (4 to 20mA).
3
Frequency
setting
potentiometer
1/2W1kΩ
*5
1
10(+5V)
2 0 to 5VDC *3
(0 to 10VDC)
2
AM
(+)
5
(-)
5(Analog common)
Terminal 4
(+)
input
(Current (-)
input)
4 4 to 20mADC
0 to 5VDC
0 to 10VDC *4
V
Analog signal output
(0 to 10VDC)
PU
connector
I
Voltage/current
input switch *4
*5 It is recommended to use 2W1kΩ
when the frequency setting signal
is changed frequently.
Safety stop signal
Output shutoff (Line 1)
Output shutoff (Line 2)
Common terminal
Shorting
wire
SO
S1
S2
SC
Output shutoff
circuit
For
manufacturer
setting
Safety
monitor output
*8
*8 Common terminal of
terminal SO is terminal SC.
(Connected to terminal SD
inside of the inverter.)
Terminal Block Layout
Recommended wire size:
0.3mm² 0.75mm²
Mitsubishi Electric Automation
|
Variable Frequency Drives 341
Model Number
Description
FR-PU07
Alpha-Numeric multi-language keypad
Notes
Stocked Item
S
FR-PA07
Panel mount basic keypad
S
FR-CONFIGURATOR
Programming and diagnostic software
S
SC-FRPC
Serial communications cable
FR-CB201
Remote cable for connecting keypad
1 meter cable
S
FR-CB203
Remote cable for connecting keypad
3 meter cable
S
FR-CB205
Remote cable for connecting keypad
5 meter cable
S
FR-ABR-_ _ K
External braking resistor
S
FR-RJ45-HUB4
Serial Network Hub - 2 Stations
-
FR-RJ45-HUB10
Serial Network Hub - 8 Stations
-
FR-RJ45-TR
Terminating Resistor for FR-RJ45-HUB
-
S
Note: _ _ represents KW rating.
Input Radio Noise Filter
This filter is connected to the input of the drive and helps to reduce
radiated noise in the radio frequencies.
FR-BIF-H
4
Dimensions mm (in)
W
D
Stocked
Item
58 (2.3)
44 (1.8)
42 (1.7)
S
58 (2.3)
44 (1.8)
42 (1.7)
-
A1
φd1
A1
A2
Glass-braided cable
2.0mm2 white
φd2
D
A2
H
L
W2
B1
FR-BIF
460
Kit Model
Number
500 +200
W
W1 ±1
B2
208 - 230
Leakage
Current
(mA)
4
Drive
Voltage
Brake Resistors
5.3
Line Noise Filter
Provides a toroid for line noise reduction.
2.5
n VARIABLE FREQUENCY DRIVES
D700 Series Options
Brake Resistor Model
Dimensions mm (in)
Drive Hp
Kit Model
Number
L
W
D
0.5 - 5
FR-BSF01
110 (4.33)
22.5 (0.89)
65 (2.56)
S
0.5 - 75
FR-BLF
180 (7.07)
31.5 (1.24)
83 (3.27)
S
Stocked Item
D700 EMC Filters
This attachment allows the VFD to be mounted onto the filter.
Drive Model
Stocked Item
FFR-CS-050-14A-RF1
Model Number
D720S-008 to 042
-
FFR-CS-080-20A-RF1
D720S-070
-
FFR-CS-110-26A-RF1
D720S-100
-
FFR-CSH-036-8A-RF1
D740-012 to 036
-
FFRCSH-080-16A-RF1
D740-050 to 080
-
FFRMSH-170-30A-RF1
D740-120 to 160
-
DIN Rail Mounting Attachment
This attachment allows the D700 Series inverter to mount on a 35mm DIN rail.
Model Number
D710W
Drive Model
D720S
D720
D740
Stocked Item
FR-UDA01
008-025
008-042
008-042
-
S
FR-UDA02
-
070
070-100
012-080
S
FR-UDA03
042
-
165
-
-
Description
Includes E720 and D720 1HP, pre-wired digital input
switches, led outputs and speed potentiometer
Includes 1/2HP motor with quick connection to
VFD-MOTOR-DEMO
VFD-MICRO-DEMO
VFD-MICRO-DEMO
342
200V Class
FR-ABR-0.4K
FR-ABR-0.75K
FR-ABR-2.2K
FR-ABR-3.7K
FR-ABR-5.5K
FR-ABR-7.5K
FR-ABR-11K
FR-ABR-15K (*1)
400V Class
FR-ABR-H0.4K
FR-ABR-H0.75K
FR-ABR-H1.5K
FR-ABR-H2.2K
FR-ABR-H3.7K
FR-ABR-H5.5K
FR-ABR-H7.5K
FR-ABR-H11K
FR-ABR-H15K (*2)
H
140
215
240
215
335
400
400
300
125
200
225
200
320
385
385
285
100
175
200
175
295
360
360
260
40
40
50
61
61
80
100
100
21
21
26
33
33
40
50
50
115
140
215
240
215
335
400
400
300
100
125
200
225
200
320
385
385
285
75
100
175
200
175
295
360
360
260
40
40
40
50
61
61
80
100
100
21
21
21
26
33
33
40
50
50
Notes:
1. For the 15K, connect the two supplied resistors (18 ohms) in parallel
2. For the H15K, connect the two supplied resistors (18 ohms) in series.
D700 Conduit Kits
Kit Model
Number
Part Number
FR-D710W- FR-D720S- FR-D720- FR-D740-
Stocked
Item
FR-E7FN-01
008/014
008/014
008/014
-
S
FR-E7FN-02
025
025
025
-
S
FR-E7FN-03
-
042
042
-
S
Stocked
Item
FR-E7FN-04
-
-
070/100
036
S
FR-E7FN-06
-
100
-
-
S
S
FR-E7FN-07
-
-
165
-
S
FR-E7FN-08
-
-
230/328
120/160
S
S
FR-E7FN-11
-
-
-
012/022
-
FR-E7FN-12
042
070
-
050/080
-
D700 Demonstration Unit
Model Number
Dimensions (mm)
W1
W2
D
W
D700 Building Management Options
D700 Heatsink Extension Kits
Part Number
Kit Model
Number
FR-D720S-
FR-D720-
FR-D740-
FR-E7CN-02
025
025
025
-
S
FR-E7CN-03
-
042
042
-
S
FR-E7CN-04
-
070
070/100
036 to 080
S
FR-E7CN-06
-
100
-
-
S
FR-E7CN-07
-
-
165
-
S
FR-E7CN-08
042
-
238/318
120/160
S
FR-E7CN-11
-
-
-
012/022
-
ETH-1000
(*2, *3)
X
X
X
X
X
X
-
Network Type / Model
Stocked Item
FR-D710W-
Gateway
Communication
BACnet/IP
Ethernet/IP
Modbus/TCP
Profinet IO
BACnet MS/TP
Metasys N2
Stocked Item
XLTR-1000
(*2, *3)
X
X
-
Notes:
1. For additional information, visit www.iccdesigns.com
2. Communication to multiple VFD’s is possible
3. Mounted and powered external to VFD
D700 Series Watt Loss and Efficiency Data
115VAC 1-Phase Input
Part
Number
HP-CT
FR-D710W-
240VAC 1-Phase Input
Rated
Watts
Watts
Loss
Efficiency
Part
Number
FR-D720S-
240VAC 3-Phase Input
Rated
Watts
Watts
Loss
Efficiency
Part
Number
FR-D720-
480VAC 3-Phase Input
Rated
Watts
Watts
Loss
Efficiency
Part
Number
FR-D740-
Rated
Watts
Watts
Loss
Efficiency
-
-
-
1/8
008
100
14
86%
008
100
14
86%
008
100
14
86%
1/4
015
200
20
90%
015
200
20
90%
014
200
20
90%
-
-
-
-
1/2
030
400
38
91%
030
400
32
92%
025
400
32
92%
012
400
40
90%
1
050
750
50
93%
050
750
50
93%
042
750
50
93%
022
750
55
93%
2
-
-
-
-
070
1500
80
95%
070
1500
80
95%
036
1500
90
94%
3
-
-
-
-
100
2200
110
95%
100
2200
100
95%
050
2200
100
95%
-
5
-
-
-
-
-
-
-
-
165
3700
160
96%
080-
3700
180
95%
7.5
-
-
-
-
-
-
-
-
238
5500
270
95%
120
5500
240
96%
10
-
-
-
--
-
-
-
-
318
7500
360
95%
160
7500
280
96%
General Notes:
1. The amount of heat generated by the inverter is based on one inverter connected to one motor of the same capacity.
2. The amount of heat generated in the above table is the amount of heat generated when the inverter is operated at its rated current.
3. The amount of heat generated will decrease according to the motor load and usage (duty).
D700 Standby Power
115VAC 1-Phase Input
HP-CT
240VAC 1-Phase Input
Part Number
Stand-By Power
Consumption
Part Number
240VAC 3-Phase Input
Stand-By Power
Consumption
Part Number
480VAC 3-Phase Input
Stand-By Power
Consumption
Part Number
Stand-By Power
Consumption
FR-D710W-
Min
Max
FR-D720S-
Min
Max
FR-D720-
Min
Max
FR-D740-
Min
Max
1/8
008
5.5
10.5
008
5.5
10.5
008
5.5
10.5
-
-
-
1/4
015
5.5
10.5
015
5.5
10.5
014
5.5
10.5
-
-
-
1/2
030
5.5
10.5
030
5.5
10.5
025
5.5
10.5
012
10.5
15
1
050
5.5
10.5
050
5.5
10.5
042
5.5
10.5
022
10.5
15
2
-
-
-
070
5.5
14
070
5.5
14
036
10.5
17
3
-
-
-
100
5.5
14
100
5.5
14
050
10.5
17
5
-
-
-
-
-
-
165
6
15
080
10.5
17
7.5
-
-
-
-
-
-
238
13
22.5
120
13.5
22.5
10
-
-
-
-
-
-
318
13
22.5
160
13.5
22.5
General Notes:
1. The maximum is generated with PC terminal operating 100mA load, external parameter unit, and cooling fan operating.
2. The minimum is generated with no load on PC terminal, no external parameter unit, and cooling fan off.
Mitsubishi Electric Automation
|
Variable Frequency Drives 343
n VARIABLE FREQUENCY DRIVES
D700 Dynamic Braking
All Mitsubishi Electric VFD’s have some inherent braking capability. During controlled deceleration, motor regenerative losses are
dissipated in the motor, wire, and VFD circuitry. The built-in DC injection braking allows for low speed braking and stopping.
When the above capabilities are inadequate for an application, it is necessary to add a power transistor brake unit and resistor unit in
series across the DC bus. Motor regeneration causes the DC bus voltage to increase, and when the voltage exceeds a specified threshold,
the transistor turns on to pass current through the resistor. Motor kinetic energy is converted to heat energy. VFD overcurrent and
overvoltage protective circuits are active at all times, and will fault-trip the VFD if the brake size is inadequate.
Two main factors must be considered when sizing the brake, the effective duty cycle (%ED) and the short time duty rating. The
effective duty cycle is increased when an external resistor is added. It is preferable to profile the effective duty cycle of the units of time.
With this information, the short time duty is known and the %ED can be calculated, as shown in the below example.
%ED = Braking time / total time for complete operating cycle *100
Example: Complete cycle is:
5 sec: Acceleration time to reach set speed
60 sec: Run time at set speed
3 sec: Deceleration time to come to a complete stop
12 sec: Time period motor remains stopped
%ED = 3 / (5 + 60 + 3 + 12) * 100 = 3.6%
The tables shown assume 100% brake torque, when brake torque is represented by its percentage to the rated torque of the applied motor.
Torque (kg.m) = 974 * Power (kW) / Speed (rpm).
240VAC Dynamic Braking Resistor at 100% Braking Torque
Resistor Kit Model
Number
FR-ABR-0.4K
FR-ABR-0.75K
FR-ABR-2.2K
FR-ABR-3.7K
FR-ABR-5.5K
FR-ABR-7.5K
FR-ABR-11K
FR-ABR-15K
(2 resistors in parallel)
Weight
Resistance
(Ohms)
0.2 (0.5)
0.4 (0.9)
0.5 (1.1)
0.8 (1.8)
1.3 (2.9)
2.2 (4.9)
3.4 (7.5)
200
100
60
40
25
20
13
Continuous
Permissible
Power
(W)
60
80
120
155
185
340
560
2.4 (5.3) x 2
9 (18 / 2)
805
Motor
(Hp)
Drive Model
D710W &
D720(S)
% ED
Stocked
Item
1/2
1
2&3
5
7 1/2
10
15
025
042
070 / 100
165
238
318
450
10%
10%
10%
10%
10%
10%
6%
S
S
S
S
S
S
S
20
580
6%
S
480VAC Dynamic Braking Resistor at 100% Braking Torque
Resistor Kit Model
Number
FR-ABR-H0.4K
FR-ABR-H0.75K
FR-ABR-H1.5K
FR-ABR-H2.2K
FR-ABR-H3.7K
FR-ABR-H5.5K
FR-ABR-H7.5K
FR-ABR-H11K
FR-ABR-H15K
(2 resistors in parallel)
344
Weight
Resistance
(Ohms)
0.2 (0.5)
0.2 (0.5)
0.4 (0.9)
0.5 (1.1)
0.8 (1.8)
1.3 (2.9)
2.2 (4.9)
3.4 (7.5)
1200
700
350
250
150
110
75
52
Continuous
Permissible
Power
(W)
45
75
115
120
155
185
340
530
2.4 (5.3) x 2
36 (18 x 2)
870
Drive Model
Motor
(Hp)
D740
% ED
Stocked
Item
1/2
1
2
3
5
7 1/2
10
15
012
022
036
050
080
120
160
230
10%
10%
10%
10%
10%
10%
10%
6%
S
S
S
S
S
S
S
S
20
295
6%
S
E700 Series
The cost-effective variable speed control solution for general purpose applications.
• Available in 115V, 240V and 480V up
to 20HP
• Advanced Magnetic Flux Vector Control
for improved starting torque and smooth
low speed motor operation
• Auto-tuning allows improved
performance using virtually any
manufacturer’s motor
• All capacities include built-in brake
chopper
• USB communications allow fast
commissioning and troubleshooting
• Standard RS485 serial communications
supporting Modbus® RTU
•
•
•
•
•
•
•
•
Sink / Source selectable I/O
Supports remote I/O function via network
Built-in PID Control
Delivers rated current at 50°C and
14.5kHz carrier frequency with minimal
de-rating
200% overload for 3 seconds
0 to 10V analog output
CC-Link®, DeviceNet™, Profibus-DP,
LonWorks®
Standard 5 year warranty
FR-D720 – 008 – NA
Voltage
115
1 Phase
Symbol
D710W
D720S
D720
D740
Voltage Class
Single-phase 115V class
Single-phase 240V class
Three-phase 240V class
Three-phase 480V class
Inverter capacity
amperage / 10
(008 = 0.8A
output)
1/8 – 1 Hp
240
1 Phase
1/8 – 3 Hp
208/230
3 Phase
1/8 – 20 Hp
460
3 Phase
1/4 – 20 Hp
Horsepower
E700 Series
HP
Output Amps
1/8
1/4
1/2
1
0.8
1.5
3
5
1/8
1/4
1/2
1
2
3
0.8
1.5
3
5
8
11
1/8
1/4
1/2
1
2
3
5
7 1/2
10
15
20
0.8
1.5
3
5
8
11
17.5
24
33
47
60
1/2
1
2
3
5
7 1/2
10
15
20
1.6
2.6
4
6
9.5
12
17
23
30
Dimensions in inches (mm)
Height
Width
Depth
1-Phase 100~120VAC Input / 3-Phase 200~240VAC Output
FR-E710W-008-NA
5.0 (128)
2.7 (68)
3.2 (80.5)
FR-E710W-015-NA
5.0 (128)
2.7 (68)
4.4 (110.5)
FR-E710W-030-NA
5.0 (128)
2.7 (68)
4.5 (112.5)
FR-E710W-050-NA
5.0 (128)
6.7 (170)
6.1 (155)
1-Phase 200~240VAC Input / 3-Phase 200~240VAC Output
FR-E720S-008-NA
5.0 (128)
2.7 (68)
3.2 (80.5)
FR-E720S-015-NA
5.0 (128)
2.7 (68)
3.2 (80.5)
FR-E720S-030-NA
5.0 (128)
2.7 (68)
6.2 (157.6)
FR-E720S-050-NA
5.0 (128)
4.3 (108)
5.4 (135.5)
FR-E720S-080-NA
5.0 (128)
4.3 (108)
6.4 (161)
FR-E720S-110-NA
5.9 (150)
5.5 (140)
6.2 (155.5)
3-Phase 200~240VAC Input & Output
FR-E720-008-NA
5.0 (128)
2.7 (68)
3.2 (81)
FR-E720-015-NA
FR-E720-030-NA
5.0 (128)
2.7 (68)
4.5 (113)
FR-E720-050-NA
5.0 (128)
2.7 (68)
5.3 (133)
FR-E720-080-NA
5.0 (128)
4.3 (108)
5.4 (136)
FR-E720-110-NA
FR-E720-175-NA
5.0 (128)
6.7 (170)
5.7 (143)
FR-E720-240-NA
10.3 (260)
7.1 (180)
6.5 (165)
FR-E720-330-NA
FR-E720-470-NA
10.3 (260)
8.7 (220)
7.5 (190)
FR-E720-600-NA
3-Phase 380~480VAC Input & Output
FR-E740-016-NA
5.9 (150)
5.5 (140)
4.5 (114)
FR-E740-026-NA
FR-E740-040-NA
FR-E740-060-NA
5.9 (150)
5.5 (140)
5.4 (135)
FR-E740-095-NA
FR-E740-120-NA
5.9 (150)
8.7 (220)
5.8 (147)
FR-E740-170-NA
FR-E740-230-NA
10.3 (260)
8.7 (220)
7.5 (190)
FR-E740-300-NA
Model Number
Mitsubishi Electric Automation
Weight
Lbs (kg)
Stocked Item
1.1 (0.5)
1.3 (0.6)
2.0 (0.9)
7.5 (3.4)
S
S
S
S
1.1 (0.5)
1.1 (0.5)
1.3 (0.6)
3.1 (1.4)
3.1 (1.4)
4.2 (1.9)
S
S
S
S
S
S
1.1 (0.5)
1.6 (0.7)
2.2 (1.0)
3.1 (1.4)
3.8 (1.7)
9.5 (4.3)
19.9 (9)
3.1 (1.4)
4.2 (1.9)
7.1 (3.2)
19.9 (9)
|
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
Variable Frequency Drives 345
Control Method
Output Frequency Range
Control Specifications
Frequency Setting
Resolution
Analog Input
Digital Input
Analog Input
Digital Input
Voltage/Frequency Characteristics
Frequency
Accuracy
Starting Torque
Torque Boost
Acceleration/Deceleration Time
Setting
Regenerative Braking Torque (*1)
DC Injection Brake
Stall Prevention Operation Level
Frequency Setting
Signal
Analog Input
Digital Input
200% or more (at 0.5Hz) when advanced magnetic flux vector control is set (3.7K or less)
Manual torque boost
0.01 to 360s, 0.1 to 3600s (acceleration and deceleration can be set individually), linear or S-pattern acceleration/deceleration mode
can be selected.
FR-E720-008 and 015, FR-E720S-008 and 015, FR-E710W-008 and 015 ..... 150%, FR-E720-030 and 050, FR-E740-016 and 026,
FR-E720S-030 and 050, FR-E710W-030 and 050 ..... 100%, FR-E720-080, FR-E740-040, FR-E720S-080 ..... 50%, FR-E720-110 or
more, FR-E740-060 or more, FR-E720S-110 ..... 20%
Operation frequency (0 to 120Hz), operation time (0 to 10s), operation voltage (0 to 30%) variable
Operation current level can be set (0 to 200% adjustable), whether to use the function or not can be selected
Two points
Terminal 2: 0 to 10V, 0 to 5V can be selected; Terminal 4: 0 to 10V, 0 to 5V, 4 to 20mA can be selected
Entered from operation panel and parameter unit
Forward and reverse rotation or start signal automatic self-holding input (3-wire input) can be selected.
Input Signal
Operational Functions
Maximum/minimum frequency setting, frequency jump operation, external thermal relay input selection, automatic restart after instantaneous power failure operation, forward/reverse rotation prevention, remote setting, brake sequence, second function, multi-speed
operation, stop-on contact control, droop control, regeneration avoidance, slip compensation, operation mode selection, offline auto
tuning function, PID control, computer link operation (RS-485)
Output Signal
Points
Open Collector
Output
Relay Output
Operating Status
For Meter
Output Points
Operation Panel
Parameter Unit
(FR-PU07)
Additional Display
By The Parameter
Unit (FR-PU04/
FR-PU07) Only
Two points
One point
You can select from among inverter operation, up-to-frequency, overload alarm, output frequency detection, regenerative brake prealarm, electronic thermal relay function prealarm, inverter operation ready, output current detection, zero current detection, PID lower
limit, PID upper limit, PID forward/reverse rotation output, brake opening request, fan alarm*3, heatsink overheat pre-alarm, deceleration at an instantaneous power failure, PID control activated, during retry, life alarm, current average value monitor, remote output,
alarm output, fault output, fault output 3, and maintenance timer alarm
Analog Output
0 to 10VDC: one point
You can select from among output frequency, motor current (steady), output voltage, frequency setting, motor torque, converter output voltage, regenerative brake duty, electronic thermal relay function load factor, output current peak value, converter output voltage
peak value, reference voltage output, motor load factor, PID set point, PID measured value, output power 0 to 10VDC
For Meter
Indication
Soft-PWM control/high carrier frequency PWM control (V/F control, advanced magnetic flux vector control, general-purpose magnetic
flux vector control, optimum excitation control can be selected)
0.2 to 400Hz
0.06Hz/60Hz (terminal2, 4: 0 to 10V/10bit)
0.12Hz/60Hz (terminal2, 4: 0 to 5V/9bit)
0.06Hz/60Hz (terminal4: 4 to 20mA/10bit)
0.01Hz
Within ±0.5% of the max. output frequency (25°C ±10°C)
Within 0.01% of the set output frequency
Base frequency can be set from 0 to 400Hz. Constant torque/variable torque pattern can be selected
Seven points: You can select from among multi-speed selection, remote setting, stop-on contact selection, second function selection,
terminal 4 input selection, JOG operation selection, PID control valid terminal, brake opening completion signal, external thermal input,
PU-External operation switchover, V/F switchover, output stop, start self-holding selection, forward rotation, reverse rotation command, inverter reset, PU-NET operation switchover, External-NET operation switchover, command source switchover, inverter operation enable signal, and PU operation external interlock
Output Signal
Operation Specifications
Start Signal
Operating
Status
You can select from among output frequency, motor current (steady), output voltage, frequency setting, cumulative energization time,
actual operation time, motor torque, converter output voltage, regenerative brake duty, electronic thermal relay function load factor,
output current peak value, converter output voltage peak value, motor load factor, PID set point, PID measured value, PID deviation,
inverter I/O terminal monitor, I/O terminal option monitor, output power, cumulative power, motor thermal load factor, and inverter
thermal load factor.
Fault Definition
Fault definition is displayed when the fault occurs and the past 8 fault definitions (output voltage/current/frequency/cumulative
energization time right before the fault occurs) are stored
Operating Status Not used
Fault Definition
Output voltage/current/frequency/cumulative energization time immediately before the fault occurs
Interactive
Guidance
Function (help) for operation guide
Protective/Warning Function
Environment
n VARIABLE FREQUENCY DRIVES
E700 General Specifications
Overcurrent during acceleration, overcurrent during constant speed, overcurrent during deceleration, overvoltage during acceleration,
overvoltage during constant speed, overvoltage during deceleration, inverter protection thermal operation, motor protection thermal
operation, heatsink overheat, input phase failure (*6), output side earth (ground) fault overcurrent at start (*5), output phase failure,
external thermal relay operation (*5), option fault, parameter error, internal board fault, PU disconnection, retry count excess (*5), CPU
fault, brake transistor alarm, inrush resistance overheat, communication error, analog input error, USB communication error, brake
sequence error 4 to 7 (*5)
Warning functions: Fan alarm (*3), overcurrent stall prevention, overvoltage stall prevention, PU stop, parameter write error, regenerative brake prealarm (*5), electronic thermal relay function prealarm, maintenance output (*5), undervoltage
Ambient Temperature
-10°C to +50°C (14°F to 122°F) (non-freezing) (*4)
Ambient Humidity
90%RH maximum (non-condensing)
Storage Temperature (*2)
-20°C to +65°C (-4°F to 149°F)
Atmosphere
Indoors (without corrosive gas, flammable gas, oil mist, dust and dirt etc.)
Altitude/Vibration
Maximum 1000m (3280.80 feet) above sea level, 5.9m/s2 or less at 10 to 55Hz (directions of X, Y, Z axes)
Notes:
1. The braking torque indicated is a short-duration average torque (which varies with motor loss) when the motor alone is decelerated from 60Hz in the shortest time and is not a continuous regenerative
torque. When the motor is decelerated from the frequency higher than the base frequency, the average deceleration torque will reduce.Since the inverter does not contain a brake resistor, use the optional
brake resistor when regenerative energy is large. A brake unit (FR-BU2) may also be used.
2. Temperatures applicable for a short time, e.g. in transit. As the FR-E720-008 to 050, FR-E740-016, 026, FR-E720S-008 to 030, FR-E710W-008 to 050 are not provided with the cooling fan, this alarm does
not function.
3. When using the inverters at the surrounding air temperature of 40°C (104°F) or less, the inverters can be installed closely attached (0cm clearance).
4. This protective function does not function in the initial status.
5. This protective function is available with the three-phase power input specification model only.
346
E700 Series Terminal Connection Diagram
One-phase 100V power input
Three-phase 200V power input
Three-phase 400V power input
*1. DC reactor (FR-HEL)
Sink logic
Main circuit terminal
Control circuit terminal
*6 Terminal P1 is not available for single-phase
100V power input model.
When connecting a DC reactor, remove the
jumper across P1-P/+
Single-phase 100V power input model is not
compatible with DC reactor.
Single-phase power input
MCCB
Brake unit
(Option)
MC
Single-phase
AC power
supply
R/L1
S/L2
*1
*8
PR N/-
P1
*6
MC
R/L1
S/L2
T/L3
Three-phase
AC power
supply
*8 Brake resistor (FR-ABR, MRS, MYS type)
Install a thermal relay to prevent an
overheat and burnout of the brake resistor.
(The brake resistor can not be connected
to the FR-E720-008 and 015, FR-E720S008 and 015, FR-E710W-008 and 015.)
R
Earth
(Ground)
Jumper
MCCB
*7 A brake transistor is not built-in to the
FR-E720-008 and 015, FR-E720S-008
and 015, FR-E710W-008 and 015.
P/+
*7
U
Inrush current
limit circuit
Earth
(Ground)
Motor
V
W
IM
Main circuit
Earth (Ground)
Control circuit
Standard control temirnal block
Output
stop
STF
24VDC power supply
(Common for external power supply transistor)
RUN
RL
Running
MRS
FU
Open collector output common
Sink/source common
SE
24V
PC *2
10(+5V)
3
*4 Terminal input
specifications can be
changed by analog input
specifications switchover
(Pr. 267). Set the
voltage/current input
switch in the "V" position
to select voltage input (0
to 5V/0 to10V) and "I"
(initial value) to select
current input (4 to 20mA).
1/2W1kΩ
*5
2
1
Terminal 4
(+)
input
(Current (-)
input)
Connector for
plug-in option connection
AM
(+)
5
(-)
2 0 to 5VDC *3
(0 to 10VDC)
Analog signal output
(0 to 10VDC)
PU
connector
5(Analog common)
4 4 to 20mADC
0 to 5VDC
0 to 10VDC *4
I
*5 It is recommended to use 2W1kΩ
when the frequency setting signal
is changed frequently.
Terminal functions vary with
the output terminal assignment
(Pr. 190 and Pr. 191)
Frequency detection
Frequency setting signals (Analog)
*3 Terminal input specifications Frequency
can be changed by analog setting
input specifications
potentiometer
switchover (Pr. 73).
Terminal functions vary
by Pr. 192 A,B,C terminal
function selection
Open collector output
RM
SD
Contact input common
Relay output
(Fault output)
A
RH
RES
Reset
B
STR
SINK
supply, take care not to
short across terminals
PC-SD.
Relay output
C
SOURCE
Control input signals (No voltage input allowed)
Forward
Terminal functions vary rotation start
with the input terminal Reverse
assignment (Pr. 178 to rotation start
Pr. 184)
High
speed
Multi-speed selection Middle
speed
*2 When using terminals PCLow
SD as a 24VDC power
speed
USB
connector
V
Voltage/current
input switch *4
Option connector
Terminal Block Layout
10
2
5
4 RUN FU SE
AM RL RM RH MRS RES SD PC STF STR SD SD
A
B
C
Mitsubishi Electric Automation
|
Variable Frequency Drives 347
n VARIABLE FREQUENCY DRIVES
E700 Series Plug-In Options
E700 Series External Options
Model Number
Description
FR-A7NC E KIT
CC-Link Network Option
S
FR-A7ND E KIT
DeviceNet Network Option
S
FR-A7NP E KIT
Profibus-DP Network Option
S
FR-A7NL E KIT
LonWorks Network Option
S
FR-A7AX E KIT
Additional 16-bit Digital Input
S
FR-A7AY E KIT
Model Number
Stocked Item
Additional Analog & Digital Output
Description
Stocked Item
FR-PU07
Alpha-Numeric multi-language keypad
S
FR-PU07BB-L
Battery powered Alpha-Numeric multi-language
keypad
S
FR-CB20
Keypad extension cable
S
Serial communications cable
S
External brake resistor
S
SC-FRPC
K
S
FR-ABR-
Serial Network Hub - 2 Stations
-
FR-A7AR E KIT
Additional Relay Output
S
FR-RJ45-HUB4
FR-E7TR
Multidrop for Serial
Communication
S
FR-RJ45-HUB10
Serial Network Hub - 8 Stations
-
FR-RJ45-TR
Terminating Resistor For FR-RJ45-HUB
-
Note: _ _ represents drive kW rating
E700 Dynamic Braking
All Mitsubishi Electric VFD’s have some inherent braking capability. During controlled deceleration, motor regenerative losses are
dissipated in the motor, wire, and VFD circuitry. The built-in DC injection braking allows for low speed braking and stopping.
When the above capabilities are inadequate for an application, it is necessary to add a power transistor brake unit and resistor unit in
series across the DC bus. Motor regeneration causes the DC bus voltage to increase, and when the voltage exceeds a specified threshold,
the transistor turns on to pass current through the resistor. Motor kinetic energy is converted to heat energy. VFD overcurrent and
overvoltage protective circuits are active at all times, and will fault-trip the VFD if the brake size is inadequate.
Two main factors must be considered when sizing the brake, the effective duty cycle (%ED) and the short time duty rating. The
effective duty cycle is increased when an external resistor is added. It is preferable to profile the effective duty cycle of the units of time.
With this information, the short time duty is known and the %ED can be calculated, as shown in the below example.
%ED = Braking time / total time for complete operating cycle *100
Example: Complete cycle is:
5 sec: Acceleration time to reach set speed
60 sec: Run time at set speed
3 sec: Deceleration time to come to a complete stop
12 sec: Time period motor remains stopped
%ED = 3 / (5 + 60 + 3 + 12) x 100 = 3.6%
The tables shown assume 100% brake torque, when brake torque is represented by its percentage to the rated torque of the applied motor.
Torque (kg.m) = 974 x Power (kW) / Speed (rpm).
240VAC Dynamic Braking Resistor at 100% Braking Torque
Resistor Kit Model
Number
FR-ABR-0.4K
FR-ABR-0.75K
FR-ABR-2.2K
FR-ABR-3.7K
FR-ABR-5.5K
FR-ABR-7.5K
FR-ABR-11K
FR-ABR-15K
(2 resistors in parallel)
Weight
Resistance
(Ohms)
0.2 (0.5)
0.4 (0.9)
0.5 (1.1)
0.8 (1.8)
1.3 (2.9)
2.2 (4.9)
3.4 (7.5)
200
100
60
40
25
20
13
Continuous
Permissible
Power
(W)
60
80
120
155
185
340
560
2.4 (5.3) x 2
9 (18 / 2)
805
Motor
(Hp)
Drive Model
D710W &
D720(S)
% ED
Stocked
Item
1/2
1
2&3
5
7 1/2
10
15
025
042
070 / 100
165
238
318
450
10%
10%
10%
10%
10%
10%
6%
S
S
S
S
S
S
S
20
580
6%
S
480VAC Dynamic Braking Resistor at 100% Braking Torque
Resistor Kit Model
Number
FR-ABR-H0.4K
FR-ABR-H0.75K
FR-ABR-H1.5K
FR-ABR-H2.2K
FR-ABR-H3.7K
FR-ABR-H5.5K
FR-ABR-H7.5K
FR-ABR-H11K
FR-ABR-H15K
(2 resistors in parallel)
348
Weight
Resistance
(Ohms)
0.2 (0.5)
0.2 (0.5)
0.4 (0.9)
0.5 (1.1)
0.8 (1.8)
1.3 (2.9)
2.2 (4.9)
3.4 (7.5)
1200
700
350
250
150
110
75
52
Continuous
Permissible
Power
(W)
45
75
115
120
155
185
340
530
2.4 (5.3) x 2
36 (18 x 2)
870
Drive Model
Motor
(Hp)
D740
% ED
Stocked
Item
1/2
1
2
3
5
7 1/2
10
15
012
022
036
050
080
120
160
230
10%
10%
10%
10%
10%
10%
10%
6%
S
S
S
S
S
S
S
S
20
295
6%
S
Brake Resistors
FR-ABR-H0.4K
FR-ABR-H0.75K
FR-ABR-H1.5K
FR-ABR-H2.2K
FR-ABR-H3.7K
FR-ABR-H5.5K
FR-ABR-H7.5K
FR-ABR-H11K
FR-ABR-H15K (*2)
115
140
215
240
215
335
400
400
300
40
40
50
61
61
80
100
100
21
21
26
33
33
40
50
50
40
40
40
50
61
61
80
100
100
21
21
21
26
33
33
40
50
50
500 +200
W
W1 ±1
W2
A1
φd1
A1
A2
Glass-braided cable
2.0mm2 white
φd2
D
A2
2.5
400V Class
100
125
200
225
200
320
385
385
285
B1
140
215
240
215
335
400
400
300
H
B2
FR-ABR-0.4K
FR-ABR-0.75K
FR-ABR-2.2K
FR-ABR-3.7K
FR-ABR-5.5K
FR-ABR-7.5K
FR-ABR-11K
FR-ABR-15K (*1)
D
H
Dimensions (mm)
W1
W2
200V Class
125
100
200
175
225
200
200
175
320
295
385
360
385
360
285
260
W
5.3
Brake Resistor Model
75
100
175
200
175
295
360
360
260
Notes:
1. For the 15K, connect the two supplied resistors (18 ohms) in parallel.
2. For the H15K, connect the two supplied resistors (18 ohms) in series.
Input Radio Noise Filter
This filter is connected to the input of the drive and helps to reduce
radiated noise in the radio frequencies.
Dimensions mm (in)
Drive
Voltage
Kit Model
Number
Leakage
Current
(mA)
L
W
D
Stocked
Item
208 - 230
FR-BIF
4
58 (2.3)
44 (1.8)
42 (1.7)
S
460
FR-BIF-H
4
58 (2.3)
44 (1.8)
42 (1.7)
-
Line Noise Filter
Provides a toroid for line noise reduction.
L
W
D
0.5 - 5
FR-BSF01
110 (4.33)
22.5 (0.89)
65 (2.56)
S
0.5 - 75
FR-BLF
180 (7.07)
31.5 (1.24)
83 (3.27)
S
Stocked Item
DIN Rail Mounting Attachment
This attachment allows the E700 Series inverter to mount on a 35mm
DIN rail.
E720
Drive Model
Stocked Item
FFR-MSH-040-8A-RF1
E740-016 to 040
-
FFRMSH-095-16A-RF1
E740-060/095
-
FFRMSH-170-30A-RF1
E740-120/170
-
FFRMSH-300-50A-RF1
E740-230/300
-
Stocked Item
FR-UDA01
008-050
S
FR-UDA02
080-110
S
FR-UDA03
175
-
Network Type / Model
BACnet/IP
Ethernet/IP
Modbus/TCP
Profinet IO
BACnet MS/TP
Metasys N2
Siemens FLN
Stocked Item
Gateway
Communication
Drive Hp
Model Number
Model Number
Building Management Options
Dimensions mm (in)
Kit Model
Number
Drive Model
E740 EMC Filters
This attachment allows the VFD to be mounted onto the filter.
FR-A7N-ETH FR-A7N-XLT
(*2,*3,*4)
(*2,*3,*4)
X
X
X
X
X
X
X
S
S
ETH-1000
(*5,*6)
X
X
X
X
X
X
-
XLTR-1000
(*5,*6)
X
X
-
Notes:
1. For additional information, visit www.iccdesigns.com
2. Physically mounts within VFD and powered by VFD
3. Deep control cover is required
4. FR-E7TR option recommended. (PU connector not available for use)
5. Communication to multiple VFD’s is possible
6. Mounted and powered external to VFD
Mitsubishi Electric Automation
|
Variable Frequency Drives 349
n VARIABLE FREQUENCY DRIVES
Installation Interchange Attachment
This attachment allows the E700 Series inverter to be mounted using the installation holes from the previous series VFDs.
Installation Model
E700 Series
Model Number
FR-E5T-10
FR-E5T-11
Z024 Series
A200E Series
FR-A024-0.1K-UL
FR-Z024-0.1K-UL
-
FR-A024-0.2K-UL
FR-Z024-0.2K-UL
-
E720-030
FR-A024-0.4K-UL
FR-Z024-0.4K-UL
-
E720-050
FR-A024-0.75K-UL
-
-
E720-050
-
FR-Z024-0.75K-UL
-
E720-080
FR-A024-1.5K-UL
FR-Z024-1.5K-UL
-
FR-A024-2.2K-UL
FR-Z024-2.2K-UL
-
FR-A024-3.7K-UL
FR-Z024-3.7K-UL
-
-
-
FR-A220E-5.5K-UL
-
-
FR-A220E-7.5K-UL
E740-016
FR-A044-0.4K-UL
-
-
E740-026
FR-A044-0.75K-UL
-
-
E740-040
FR-A044-1.5K-UL
-
-
E740-060
FR-A044-2.2K-UL
-
-
E740-095
FR-A044-3.7K-UL
-
-
E720-240
Direct
Replacement
E720-330
Direct Attachment
FR-E5T-14
Stocked Item
E720-008
E720-175
FR-E5T-02
A0x4 Series
E720-015
E720-110
FR-E5T
Previous Model
E500 Series
S
-
-
E700 Installation Interchange Attachment
This attachment allows the E700 Series inverter to be mounted at a 90° angle so that the depth is reduced to 80 mm.
Installation Model
E700 Series
E720-030
E720-050
Model Number
FR-E5T-L
Previous Model
A0x4 Series
FR-A024-0.4K-UL
FR-A024-0.75K-UL
E500 Series
Direct
Replacement
Stocked item
Z024 Series
FR-Z024-0.4K-UL
-
-
E700 Series Watt Loss and Efficiency Data
115VAC 1-Phase Input
Part
HP-CT
Rated
Number
Watts
FR-E710W1/8
008
100
1/4
015
200
1/2
030
400
1
050
750
2
3
-5
7.5
10
15
20
-
Watts
Loss
14
20
38
50
-
240VAC 1-Phase Input
Part
Rated
Efficiency Number
Watts
FR-E720S86%
008
100
90%
015
200
91%
030
400
93%
050
750
080
1500
110
2200
-
240VAC 3-Phase Input
Part
Watts
Rated
Efficiency Number
Loss
Watts
FR-E72014
86%
008
100
20
90%
015
200
32
92%
030
400
50
93%
050
750
80
95%
080
1500
110
95%
110
2200
175
3700
240
5500
330
7500
470
11000
600
15000
480VAC 3-Phase Input
Watts
Loss
Efficiency
14
20
32
50
80
100
160
290
380
520
600
86%
90%
92%
93%
95%
95%
96%
95%
95%
95%
96%
Part
Number
FR-E740016
026
040
060
095
120
170
230
300
Rated
Watts
Watts
Loss
Efficiency
400
750
1500
2200
3700
5500
7500
11000
15000
45
50
85
100
160
310
420
560
640
89%
93%
94%
95%
96%
94%
94%
95%
96%
General Notes:
1. The amount of heat generated by the inverter is based on one inverter connected to one motor of the same capacity.
2. The amount of heat generated in the above table is the amount of heat generated when the inverter is operated at its rated current.
3. The amount of heat generated will decrease according to the motor load and usage (duty).
Conduit Kits
E700 Heatsink Extension Kits
Model Number Description
Stocked Item
Model Number Description
Stocked Item
FR-E7FN-01
Conduit kit for E720-008/015
S
FR-E7CN-02
Heatsink Extension kit for E720-030
S
FR-E7FN-02
Conduit kit for E720-030
S
FR-E7CN-03
Heatsink Extension kit for E720-050
S
FR-E7FN-03
Conduit kit for E720-050
S
FR-E7CN-04
Heatsink Extension kit for E720-080/110
S
FR-E7FN-04
Conduit kit for E720-080/110
S
FR-E7CN-05
Heatsink Extension kit for E740-016/026
S
FR-E7FN-05
Conduit kit for E740-016/026
S
FR-E7CN-06
Heatsink Extension kit for E740-040/060/090
S
FR-E7FN-06
Conduit kit for E740-040/060/090
S
FR-E7CN-07
Heatsink Extension kit for E720-175
S
FR-E7FN-07
Conduit kit for E720-175
S
FR-E7CN-08
Heatsink Extension kit for E740-120/170
S
FR-E7FN-08
Conduit kit for E740-120/170
S
FR-E7CN-09
S
FR-E7FN-09
Conduit kit for E720-240/330
Conduit kit for E720-470/600
E740-230/300
S
FR-A7CN02
Heatsink Extension kit for E720-240/330
Heatsink Extension kit for E720-470/600
E740-230/300
FR-E7FN-10
S
E700 Demonstration Unit
Model Number
Description
Stocked Item
VFD-MICRO-DEMO
Includes E720 and D720 1HP, pre-wired digital input switches, led outputs and speed potentiometer
S
VFD-MOTOR-DEMO
Includes 1/2HP motor with quick connection to VFD-MICRO-DEMO
S
350
S
E560 Series
The cost-effective variable speed control solution for general purpose applications.
•
•
•
•
•
•
•
•
Up to 10 Hp at 600VAC
Advanced Magnetic Flux Vector Control
Auto-tuning
50°C maximum ambient temperature
RS-485 serial communication (standard)
Selectable cooling fan operation mode
Built-in PID control
Adjustable carrier frequency (0.7kHz to
14.5kHz)
• Optional keypad interface (FR-PA02-02)
• Compatible with FR-PU04 user interface
• UL & cUL listed / CE marked
• Open-network communication options
• DeviceNet
• CC-Link
• Profibus DP
• Brake Transistor
FR-E560 – 3.7 K – NA
Symbol
Voltage
Voltage Class
E560
Inverter
capacity
“kW”
Three-phase 600V class
600
1 – 10 Hp
Horsepower
E560 Series
Hp
Rating (CT & VT)
Output
Current Amps
IP20 Open Chassis
Model Number
Dimensions
Height
mm (in)
Width
mm (in)
Depth
mm (in)
Weight
kg (lbs)
Stocked Item
136 (5.4)
136 (5.4)
136 (5.4)
148 (5.8)
148 (5.8)
148 (5.8)
1.8 (4.0)
2.0 (4.7)
2.0 (4.7)
3.8 (8.4)
3.8 (8.4)
3.8 (8.4)
S
S
S
S
S
S
3-Phase 575 - 600VAC Input / Output
1
2
3
5
7.5
10
1.7
2.7
4.0
6.1
9.0
12
FR-E560-0.75K-NA
FR-E560-1.5K-NA
FR-E560-2.2K-NA
FR-E560-3.7K-NA
FR-E560-5.5K-NA
FR-E560-7.5K-NA
150 (5.9)
150 (5.9)
150 (5.9)
150 (5.9)
150 (5.9)
150 (5.9)
140 (5.5)
140 (5.5)
140 (5.5)
220 (8.7)
220 (8.7)
220 (8.7)
Mitsubishi Electric Automation
|
Variable Frequency Drives 351
Control Method
Output Frequency Range
Analog Input
Digital Input
Analog Input
Frequency Precision
Digital Input
Voltage / Frequency Characteristics
Control Specifications
Frequency Control
Starting Torque
Torque Boost
Acceleration / Deceleration Time Setting
Braking Torque
Regenerative
DC Dynamic Brake
Stall Prevention Operation Level
Voltage Stall Prevention Operation Level
Fast-Response Current Limit Level
Analog Input
Frequency Setting Signal
Digital Input
Starting Signal
Alarm Reset
Multi-Speed Selection
Input Signals
Second Function Selection
Output Stop
Current Input Selection
Start Signal Automatic Self-Holding Selection
External Thermal Relay Input
PU Operation-External Operation Switching
V/F-General-Purpose Magnetic Flux Switching
Operation Functions
Output Signals
Operation Status
Display
For Meter
Control Panel Display
LED Display
Protective And Warning Functions
Environment
n VARIABLE FREQUENCY DRIVES
E560 General Specifications
Ambient Temperature
Ambient Humidity
Storage Temperature (*3 )
Atmosphere
Altitude
Vibration
Operating Status
Alarm Definition
Soft-PWM control / high carrier frequency PWM control can be selected. V / F control or general-purpose magnetic
flux vector control can be selected.
0.2 to 400Hz (starting frequency variable between 0 and 60Hz)
Across terminals 2-5: 1/500 of maximum set frequency (5VDC input), 1/1000 (10VDC, 4-20mADC input).
0.01Hz (less than 100Hz), 0.1Hz (100Hz or more) when digital setting is made using the control panel.
Within ±0.5% of maximum output frequency (25°C ±10°C) / 59°F to 95°F.
Within 0.01% of set output frequency when setting is made from control panel.
Base frequency set as required between 0 and 400Hz. Constant torque or variable torque pattern can be selected.
150% or more (at 1Hz), 200% or more (at 3Hz) when general-purpose magnetic flux vector control or slip
compensation is selected.
Manual torque boost, 0 to 30% may be set.
0.01, 0.1 to 3600 sec. (accel. and decel. can be set individually), linear or S-pattern accel./decel. mode can be
selected
0.1K, 0.2K...150% or more, 0.4K, 0.75K... 00% or more, 1.5K...50% or more, 2.2K, 3.7K, 5.5K, 7.5K ... 20% or
more (*1)
Operation frequency (0 to 120Hz), operation time (0 to 10 s), operation voltage (0 to 30%) variable.
Operation current level can be set (0 to 200% variable), presence or absence can be selected.
Operation level is fixed, presence or absence can be selected.
Operation level is fixed, presence or absence can be selected.
0 to 5VDC, 0 to 10VDC, 4 to 20mADC.
Entered from control panel (FR-PA02-02).
Forward and reverse rotation, start signal automatic self-holding input (3-wire input) can be selected.
Used to reset alarm output provided when protective function is activated.
Up to 15 speeds can be selected. (Each speed can be set between 0 and 400Hz, running speed can be changed
during operation from the control panel.)
Used to select second functions (accel. time, decel. time, torque boost, freq., electronic overcurrent
protection).
Instantaneous shut-off of inverter output (frequency, voltage).
Used to select input of frequency setting signal 4 to 20mADC (terminal 4).
Used to select start signal automatic self-holding input. (3-wire input)
Use Pr.
180 to Pr.
Thermal relay contact input for use when the inverter is stopped by the external thermal relay.
183 for
Used to switch between PU operation and external operation from outside the inverter.
Used to switch between V/F control and general-purpose magnetic flux vector from outside the inverter. selection.
Maximum/minimum frequency setting, frequency jump operation, external thermal relay input selection,
automatic restart operation after instantaneous power failure, forward/reverse rotation prevention, slip
comp., operation mode selection, off-line auto tuning function, PID control, computer link operation
(RS-485).
2 open collector output signals can be selected from inverter running, up to frequency, frequency detection, overload alarm, zero current detection, output current detection, PID upper limit, PID lower limit, PID forward/reverse
rotation, operation ready, minor fault and alarm, and 1 contact output (230VAC 0.3A, 30VDC 0.3A) can be selected.
1 signal can be selected from output frequency, motor current and output voltage. Pulse train output (1440 pulses/
second/full scale).
Output voltage, output current, set frequency, running.
Alarm definition is displayed when protective function is activated. 4 alarm definitions are stored.
Power application (POWER)
Overcurrent shut-off (during acceleration, deceleration, constant speed), regenerative overvoltage shut-off,
undervoltage (*2) , instantaneous power failure (*2), overload shut-off (electronic overcurrent protection), brake
transistor alarm, output short circuit, stall prevention, brake resistor overheat protection, fan overheat, fan failure,
parameter error, PU disconnection, ground fault protection.
Constant torque: -10°C to +50°C (non-freezing) 14°F to 122°F
90%RH or less (non-condensing)
-20°C to +65°C / -4°F to 149°F
Indoors, no corrosive and flammable gases, oil mist, dust and dirt.
Maximum 1000m (3300 ft.) above sea level for standard operation. After that derate by 3% for every extra 500m up
to 2500m (91%).
5.9 m/s2 (0.6G max.) based on JIS C 0911.
Notes:
1. The braking torque indicated is a short-duration average torque (which varies with motor loss) when the motor alone is decelerated from 60Hz in the shortest time and is not a continuous regenerative torque.
When the motor is decelerated from the frequency higher than the base frequency, the average deceleration torque will reduce. Since the inverter does not contain a brake resistor, use the optional brake
resistor when regenerative energy is large. (The optional brake resistor cannot be used with 0.1K and 0.2K.) A brake unit (BU) may also be used.
2. When undervoltage or instantaneous power failure has occurred, alarm display or alarm output is not provided but the inverter itself is protected. Overcurrent, regenerative overvoltage or other protection may
be activated at power restoration according to the operating status (load size, etc.).
3. Temperature applicable for a short period in transit, etc.
352
E500 Series Terminal Connection Diagram
MCCB
MC
3-phase AC
power supply
24VDC power output and
external transistor common
R(L 1)
S(L2)
T(L 3 )
U
V
W
PC
Note 4
P1
STF
Reverse rotation start
STR
Multi-speed selection
High
RH
Middle
RM
Low
RL
Output stop
Reset
Contact input common
Ground
Jumper
Remove this jumper when
using the optional power-factor
improving DC reactor.
(+)P
(-)N
B
A
B
C
10
2
5
4
SD
STF
STR
SD
Alarm
output
C
MRS
RES
SD
Note 3
RUN
FU
Running
Frequency detection
SE
Note 2
Frequency setting signals (Analog)
4 to 20mADC(+)
Brake resistor connection
A
Control input signals
(No voltage input allowed)
3
(Note 1)
2
Frequency
setting
potentiometer 1
1/2W1kΩ Current input(-)
RH
RM
RL
MRS
RES
SD
AM
PC
SE
RUN
FU
IM
PR
Forward rotation start
Terminal Block Layout
600V class
Motor
Open collector output common
Sink/source common
Open
collector outputs
10(+5V)
2 0 to 5VDC
0 to 10VDC
Selected
5(Common)
Note 3
4(4 to 20mADC)
When using current input as the
frequency setting signal, set "4" in
any of Pr.180 to Pr.183 (input
terminal function selection) and
assign AU (current input selection)
to any of terminal RH, RM, RL, or
MRS, then turn the AU signal on.
SD
Note 2
AM
5
Ground
PU connector
(RS-485)
(+) Analog signal
output
(- )
(0 to 10VDC)
Main circuit terminal
Control circuit input terminal
Control circuit output terminal
Notes:
1. If the potentiometer is to be operated often use a 2W1kΩ potentiometer.
2. Terminals SD and SE are electrically isolated.
3. Terminals SD and 5 are common. Do not connect them to each other or to ground.
4. To avoid damage to the VFD, do not allow a short circuit between terminals PC and SD. If they are shorted, the VFD will be damaged
E500 Series Options
Model Number
Description
Notes
FR-PA02-02
Keypad for E500 VFD
For mounting on E500 VFD
Stocked Item
FR-E5P
Keypad Panel Mounting Adapter
For use only on FR-PA02-02 and FR-CB20
S
FR-DU04
LED Parameter Unit
Also used with A500(L).
S
FR-PU04
LCD Parameter Unit
Also used with A500(L).
S
FR-E5ND
E560 DeviceNet Interface
Plug-in Option. Not for use with E520 or E510W.
-
FR-E5NP
E560 Profibus DP Interface
Plug-in Option. Not for use with E520 or E510W.
S
S
FR-E5NC
E560 CC-Link Interface
Plug-in Option. Not for use with E520 or E510W.
-
FR-E5NL
E560 LonWorks Interface
Plug-in Option. Not for use with E520 or E510W.
-
FR-CB201
Remote cable
1m cable
S
FR-CB203
Remote Cable
3m cable
S
FR-CB205
Remote Cable
5m cable
S
SH(NA)3193
FR-A500 / E500 Technical Manual
Only available for download.
-
IB(NA)0600003
FR-E5NC, CC-Link Instruction Manual
Only available for download.
-
IB(NA)0600006
FR-E5ND, DeviceNet Instruction Manual
Only available for download.
-
IB(NA)0600007
FR-E5NP, Profibus Instruction Manual
Only available for download.
-
IB(NA)0600204
FR-E560 Instruction Manual
Only available for download.
SC-FRPC
Serial Communication Cable
S
Mitsubishi Electric Automation
|
Variable Frequency Drives 353
n VARIABLE FREQUENCY DRIVES
F700 Series
The truly fantastic specifications of the F700, make this VFD from Mitsubishi Electric an absolute must for your drive systems.
• NEMA 1 UL Type 1 Enclosure Designs:
Drive can be mounted as a stand-alone
unit where required. (Plenum rated)
• Ease of Programming: Taken to new levels
with the new DU07 programming
dial and FR-Configurator programming
software
• Built-in EMC filter: Conforms to
EN61800-3 2nd environmental
• Energy Savings: Optimum Excitation
Control
• The popular setting dial makes operation
easy
• Control terminals can be used over a
network as remote I/O
• An operation panel can be installed on the
front cover and is detachable (Cable
connector option is required)
• PU/EXT (operation mode) switchover key
is available
• RS-485 communications as standard Mitsubishi or Modbus RTU protocol
• Windmill start: Catch a reverse spinning
load
• Regeneration avoidance
• PID sleep mode
• Pre-soak mode
• 3 user programmable skip frequencies
• Remote I/O capability: All the drive I/O can
be read or controlled over a network
• UL Listed for single phase input
Voltage
208/230
3/4 – 200 Hp
480
3/4 – 1000 Hp
Horsepower
F700 Ratings 200-240V Class
Input: 1 Phase/3 Phase - Output Voltage: 3 Phase 200-240V at 60Hz
Voltage Tolerance: 170-264V at 60Hz Available Braking Torque: 15% Torque Continuous
SLD (40°C)
LD
110% OL / 1min
120% OL / 1min
120% OL / 3 sec
150% OL / 3 sec
Model Number (*4)
Frame Size
Hp (*1)
FLA
Hp (*1)
FLA
1
4.6
1
4.2
FR-F720-00046-NA
A
2
7.7
2
7
FR-F720-00077-NA
B
3
10.5
3
9.6
FR-F720-00105-NA
C
5
16.7
5
15.2
FR-F720-00167-NA
C
7.5
25
7.5
23
FR-F720-00250-NA
C
10
34
10
31
FR-F720-00340-NA
D
Cooling Method
Protective
Rating
Stocked Item
S
Self Cooling
S
S
S
UL Type 1 Plenum Rated
S
S
15
49
15
45
FR-F720-00490-NA
D
S
20
63
20
58
FR-F720-00630-NA
E
S
25
77
25
70
FR-F720-00770-NA
F
S
30
93
30
85
FR-F720-00930-NA
F
S
40
125
40
114
FR-F720-01250-NA
F
50/60
154
50
140
FR-F720-01540-NA
G
60
187
60
170
FR-F720-01870-NA
H
75
233
75
212
FR-F720-02330-NA
H
S
-
Forced Air
Cooled
S
IP00 (*2)
S
S
40
125
40
114
FR-F720-01250-NAN1
F
50/60
154
50
140
FR-F720-01540-NAN1
G
60
187
60
170
FR-F720-01870-NAN1
H
75
233
75
212
FR-F720-02330-NAN1
H
-
100/125
316
100
288
FR-F720-03160-NA
K
S
150
380
125
346
FR-F720-03800-NA
K
200
475
150
432
FR-F720-04750-NA
K
Notes: See next page.
354
NEMA 1
IP00 (*2)
-
S
-
F700 Ratings 480V Class
Input: 1 Phase / 3 Phase • Output Voltage: 3 Phase 380-480V at 50/60Hz
Voltage Tolerance: 323-528V at 50/60Hz • Available Braking Torque: 15% Torque Continuous
SLD (40°C)
LD
110% OL / 1min
120% OL / 1min
120% OL / 3 sec
150% OL / 3 sec
Model Number (*4)
Frame
Size
Cooling
Method
Protective
Rating
Stocked
Item
Hp (*1)
FLA
Hp (*1)
1
2.3
1
FLA
2.1
FR-F740-00023-NA
C
S
2
3.8
2
3.5
FR-F740-00038-NA
C
S
3
5.2
3
4.8
FR-F740-00052-NA
C
S
Self Cooling
5
8.3
5
7.6
FR-F740-00083-NA
C
S
7.5
12.6
7.5
11.5
FR-F740-00126-NA
C
S
10
17
10
16
FR-F740-00170-NA
D
15
25
15
23
FR-F740-00250-NA
D
UL Type 1 Plenum rated
S
S
20
31
20
29
FR-F740-00310-NA
E
S
25
38
25
35
FR-F740-00380-NA
E
S
30
47
30
43
FR-F740-00470-NA
F
S
40
62
40
57
FR-F740-00620-NA
F
S
50/60
77
50
70
FR-F740-00770-NA
G
60
93
60
85
FR-F740-00930-NA
H
75
116
75
106
FR-F740-01160-NA
H
50/60
77
50
70
FR-F740-00770-NAN1
G
60
93
60
85
FR-F740-00930-NAN1
H
75
116
75
106
FR-F740-01160-NAN1
H
Forced Air
Cooled
S
IP00 (*3)
S
S
-
NEMA 1
-
Notes: See below.
Input: 1 Phase / 3 Phase • Output Voltage: 3 Phase 380-480V at 50/60Hz • Voltage Tolerance: 323-550V at 50/60Hz
Available Braking Torque: 15% Torque Continuous • DC Link Choke is Included With The VFD
SLD (40°C)
LD
110% OL / 1min
120% OL / 1min
120% OL / 3 sec
150% OL / 3 sec
Hp (*1)
Model Number
(*4)
Frame
Size
Fan
Protective
Rating
Stocked
Item
FLA
Hp (*1)
FLA
100/150
180
100
144
FR-F740-01800-NA
H
S
150
216
150
180
FR-F740-02160-NA
J
S
200
260
150
216
FR-F740-02600-NA
J
S
250
325
200
260
FR-F740-03250-NA
K
S
300
361
250
325
FR-F740-03610-NA
K
350
432
300
361
FR-F740-04320-NA
L
400
481
350
432
FR-F740-04810-NA
L
450
547
400
481
FR-F740-05470-NA
M
500
610
450
547
FR-F740-06100-NA
M
S
550
683
500
610
FR-F740-06830-NA
M
S
650
770
550
683
FR-F740-07700-NA
N
S
700
866
650
770
FR-F740-08660-NA
N
800
962
700
866
FR-F740-09620-NA
P
900
1094
800
962
FR-F740-10940-NA
P
-
1000
1212
900
1094
FR-F740-12120-NA
P
-
IP00 (*2)
S
S
S
Forced Air
Cooled
S
S
IP000 (*3)
S
Notes:
1. Motor ratings shown are intended as guidelines only - based on 4 pole standard induction motors.
2. NEMA 1 conduit adapter option required for types 01250 - 04750 200V class product.
3. NEMA 1 conduit adapter option required for types 00770 - 06830 400V class product.
4. For single phase input, derate output current by 40% (Models up to F720-03800-NA, F740-04810-NA.)
Mitsubishi Electric Automation
|
Variable Frequency Drives 355
Control Specifications
Control System
High carrier frequency PWM control (V/F control)/optimum excitation control/simple magnetic flux vector control
Output Frequency Range
0.5 to 400Hz
Frequency
Setting
Resolution
Analog Input
0.015Hz/0 to 60Hz (terminal 2, 4: 0 to 10V/12bit); 0.03Hz/0 to 60Hz (terminal 2, 4: 0 to 5V/11bit, 0 to 20mA/approx. 11bit,
terminal 1: -10V to +10V/11bit); 0.06Hz/0 to 60Hz (terminal 1: 0 to ±5V/10bit)
Digital Input
0.01Hz
Frequency
Accuracy
Analog Input
Within ±0.2% of the max. output frequency (25°C ± 10°C)
Digital Input
Within 0.01% of the set output frequency
Voltage/Frequency Characteristics
Base frequency can be set from 0 to 400Hz. Constant torque/variable torque pattern or adjustable 5 points V/F can be selected
Starting Torque
120% (3Hz) when set to simple magnetic flux vector control and slip compensation
Acceleration/Deceleration
Time Setting
0 to 3600s (acceleration and deceleration can be set individually), linear or S-pattern acceleration/deceleration mode can be selected.
DC Injection Brake
Operation frequency (0 to 120Hz), operation time (0 to 10s), operation voltage (0 to 30%) variable
Stall Prevention Operation Level
Operation Specifications
Frequency Setting
Signal
Operation current level can be set (0 to 150% adjustable), whether to use the function or not can be selected
Analog Input
Terminal 2, 4: 0 to 10V, 0 to 5V, 4 to 20mA can be selected. Terminal 1: -10 to +10V, -5 to 5V can be selected.
Digital Input
Four-digit BCD or 16-bit binary using the setting dial of the operation panel (when used with the option FR-A7AX)
Start Signal
Available individually for forward and reverse rotation. Start signal automatic self-holding input (3-wire input) can be selected.
Input Signals
Select any twelve signals using Pr.178 to Pr.189 (input terminal function selection) from among multi-speed selection, second function selection, terminal 4 input selection, JOG operation selection, selection of automatic restart after instantaneous power failure,
external thermal relay input, HC connection (inverter operation enable signal), HC connection (instantaneous power failure detection),
PU operation/external interlock signal , PID control enable terminal, PU operation, external operation switchover, output stop, start
self-holding selection, forward rotation command, reverse rotation command, inverter reset, PTC thermistor input, PID forward reverse
operation switchover, PU-NET operation switchover, NET-external operation switchover, command source switchover.
Operational Functions
Max. and min. frequency settings, frequency jump operation, external thermal relay input selection, polarity reversible operation, automatic
restart after instantaneous power failure operation, continuous operation at an instantaneous power failure, commercial power supply,
inverter switchover operation, forward/reverse rotation prevention, operation mode selection, PID control, computer link operation (RS-485).
Output
Signals
Operating Status
Select any seven signals using Pr.190 to Pr.196 (output terminal function selection) from among inverter running, up-to-speed, instantaneous power failure/undervoltage, overload warning, output frequency detection, second output frequency detection, electronic thermal
relay function pre-alarm, PU operation mode, inverter operation ready, output current detection, zero current detection, PID lower limit,
PID upper limit, PID forward rotation reverse rotation output, commercial power supply-inverter switchover MC1, commercial power
supply-inverter switchover MC2, commercial power supply-inverter switchover MC3, fan fault output, heatsink overheat pre-alarm, inverter
running start command on, deceleration at an instantaneous power failure, PID control activated, during retry, during PID output suspension, life alarm, input MC stop signal, power savings average value update timing, current average monitor, alarm output 2, maintenance
timer alarm, remote output, minor failure output, alarm output. Open collector output (5 points), relay output
(2 points) and alarm code of the inverter can be output (4 bit) from the open collector.
When Used With The Select any seven signals using Pr. 313 to Pr. 319 (extension output terminal function selection) from among control circuit
FR-A7AY (Option)
capacitor life, main circuit capacitor life, cooling fan life, inrush current limit circuit life.
Select from output frequency, motor current (steady or peak value), output voltage, frequency setting value, running speed, converter
output voltage (steady or peak value), electronic thermal relay function load factor, input power, output power, load meter, reference
voltage output, motor load factor, energy saving effect, PID set value, PID process value using Pr. 54 “CA terminal function selection
(analog current output)” and Pr. 158 “AM terminal function selection (analog output)”.
Display
Analog Output
Parameter
Unit
(FR-DU07/
FR-PU04)
Operating Status
Output frequency, motor current (steady or peak value), output voltage, alarm indication, frequency setting, running speed, converter output voltage (steady or peak value), electronic thermal load factor, input voltage, output voltage, road meter, cumulative energization time,
actual operation time, motor load factor, cumulative energization power, power saving effect, cumulative saving power, PID set point, PID
process value, PID deviation value, inverter I/O terminal monitor, input terminal option monitor (*1), output terminal option monitor (*1),
option fitting status monitor (*2), terminal assignment status (*2)
Alarm Definition
Alarm definition is displayed when the protective function is activated, the output voltage/current/frequency/cumulative energization time
right before the protection function was activated and the past 8 alarm definitions are stored.
Interactive Guidance Operation guide/troubleshooting with a help function. (*2)
Protective/Warning Function
Environment
n VARIABLE FREQUENCY DRIVES
F700 General Specifications
Overcurrent during acceleration, overcurrent during constant speed, overcurrent during deceleration, overvoltage during acceleration,
overvoltage during constant speed, overvoltage during deceleration, inverter protection thermal operation, heatsink overheat, instantaneous power failure occurrence, undervoltage, input phase failure, motor overload, output side earth (ground) fault overcurrent, output
phase failure, external thermal relay operation, PTC thermistor operation, option alarm, parameter error, PU disconnection, retry count
excess, CPU alarm, power supply short for operation panel, 24VDC power output short, output current detection value over, inrush resistance overheat, communication alarm (inverter), analog input alarm, internal circuit alarm (15V power supply), fan fault, overcurrent stall
prevention, overvoltage stall prevention, electronic thermal prealarm, PU stop, maintenance timer alarm (*1), parameter write error, copy
operation error, operation panel lock.
Ambient Temperature
-10°C to +50°C (non-freezing)
Ambient Humidity
90% RH or less (non-condensing)
Storage Temperature (*3)
-20°C to +65°C
Atmosphere
Indoors (without corrosive gas, flammable gas, oil mist, dust and dirt, etc.)
Altitude, Vibration
Maximum 1000m above sea level, 5.9m/s2 or less (conforms to JIS C 0040)
Notes:
1. Can be displayed only on the operation panel (FR-DU07).
2. Can be displayed only on the parameter unit (FR-PU04/FR-PU07).
3. Temperature applicable for a short period in transit, etc.
356
F700 Series Terminal Connection Diagram
F700 Control Terminal Layout
A1
RL
SE
B1
RM
RUN
C1
RH
SU
A2
RT
IPF
B2
AU
OL
C2
10E
STOP MRS
FU
SD
SD
10
RES
STF
2
SD
STR
5
CA
JOG
4
AM
1
CS
PC
Mitsubishi Electric Automation
|
Variable Frequency Drives 357
n VARIABLE FREQUENCY DRIVES
F700 Factory Supplied DC Link Chokes
FR-F700 Series
DC Link Model Number
mH
Amps
Watt Loss
Height
Width
Depth
Approx.
Weight
lb (kg)
FR-F740-01800-NA
FR-HEL-H90K
0.3
191
130
13.4 (340)
5.9 (150)
7.5 (190)
20 (44)
Standard With VFD
Dimensions inches (mm)
FR-F740-02160-NA
FR-HEL-H110K
0.246
233
130
13.4 (340)
5.9 (150)
7.7 (195)
22 (48)
FR-F740-02600-NA
FR-HEL-H132K
0.204
281
140
15.9 (405)
6.9 (175)
7.9 (200)
26 (57)
FR-F740-03250-NA
FR-HEL-H160K
0.171
335
140
15.9 (405)
6.9 (175)
8 (205)
28 (62)
FR-F740-03610-NA
FR-HEL-H185K
0.148
389
170
15.9 (405)
6.9 (175)
9.4 (240)
29 (64)
FR-F740-04320-NA
FR-HEL-H220K
0.124
462
230
15.9 (405)
6.9 (175)
9.4 (240)
30 (66)
FR-F740-04810-NA
FR-HEL-H250K
0.109
524
240
17.3 (440)
7.5 (190)
9.8 (250)
35 (77)
FR-F740-05470-NA
FR-HEL-H280K
0.098
585
270
17.3 (440)
7.5 (190)
10 (255)
38 (84)
FR-F740-06100-NA
FR-HEL-H315K
0.087
658
300
19.5 (495)
8.3 (210)
9.8 (250)
42 (92)
FR-F740-06830-NA
FR-HEL-H355K
0.077
742
360
19.5 (495)
8.3 (210)
9.8 (250)
46 (101)
FR-F740-07700-NA
FR-HEL-H400K
0.069
836
360
19.7 (500)
8.7 (220)
9.8 (250)
50 (110)
FR-F740-08660-NA
FR-HEL-H450K
0.061
940
450
19.7 (500)
8.7 (220)
10.6 (270)
57 (125)
FR-F740-09620-NA
FR-HEL-H500K
0.055
1045
450
17.8 (455)
8.5 (215)
13.6 (345)
67 (1147)
FR-F740-10940-NA
FR-HEL-H560K
0.049
1170
470
18.1 (460)
8.5 (215)
14.2 (360)
85 (187)
FR-F740-12120-NA
FR-HEL-H630K
0.044
1317
500
18.1 (460)
8.5 (215)
14.2 (360)
95 (209)
F700 Frame Size
358
Dimensions inches (mm)
Height
Width
Depth
Weight Without Reactor
lbs (kg)
A
10.2 (260)
4.3 (110)
4.3 (110)
4.2 (1.9)
B
10.2 (260)
4.3 (110)
4.9 (125)
5 (2.3)
C
10.2 (260)
5.9 (150)
5.5 (140)
9.3 (4.2)
D
10.2 (260)
8.7 (220)
6.7 (170)
17.7 (8)
E
11.8 (300)
8.7 (220)
7.5 (190)
19.4 (8.8)
32.6 (14.8)
Frame Size
F
15.8 (400)
9.8 (250)
7.5 (190)
G
21.7 (550)
12.8 (325)
7.7 (195)
77.1 (35)
H
21.7 (550)
17.1 (435)
9.8 (250)
134.4 (61)
J
27.6 (700)
18.3 (465)
9.8 (250)
134.4 (61)
K
29.1 (740)
18.3 (465)
14.2 (360)
244.5 (111)
378.9 (172)
L
39.8 (1010)
19.6 (498)
15 (380)
M
39.8 (1010)
26.8 (680)
15 (380)
385 (175)
N
52.4 (1330)
31.1 (790)
17.3 (440)
572 (260)
P
62.2 (1580)
39.2 (995)
17.3 (440)
814 (370)
F700 Series Options
Instruction Manuals
Model Number
Stocked
Item
IB(NA)0600218
-
IB(NA)0600216
-
FR-F700 Applied Manual - Contains wiring details,
VFD layout drawings, alarm definitions and complete
parameter list with definitions and setting examples.
IB(NA)0600217
-
FR-PU07 Manual - Contains complete instruction
sets and screen definitions.
IB(NA)0600240
-
Description
Conduit Attachments
Drive Model
Model Number
FR-A7FN-13 (*2)
F720 (*1)
01250
01540
01870, 02330
03160, 03800,
04750
-
FR-A7FN-14 (*2)
-
FR-A7FN05 (*3)
FR-A7FN06 (*3)
FR-A7FN07 (*3)
FR-A7FN-10 (*2)
FR-A7FN-11 (*2)
FR-A7FN-12 (*2)
F740 (*1)
00770
00930, 01160
01800
02160, 02600
Length
(in) (*4)
Weight
(lbs)
Stocked
Item
5.9"
6.2"
9"
24"
24"
5
5
15
37
41
S
S
S
S
24"
45
S
03250, 03610
04320, 04810
05470, 06100,
06830
26"
50
S
26"
64
S
Notes:
1. For FR-F700s smaller than listed above, they are UL Type 1, and conduit attachment is standard.
2. Mounting hardware included for standard DC chokes which ship with VFD. Kits are powder coated
similar to VFD, charcoal gray.
3. Kits are coated zinc clear.
4. Width and depth of kit match the asscociated VFD.
External Heatsink Attachment
Drive Model
Model Number
(*1)
Stocked Item
F720
F740
FR-A7CN01
00105 to 00250
00023 to 00126
S
FR-A7CN02
00340, 00490
00170, 00250
S
FR-A7CN03
00630
00310, 00380
S
FR-A7CN04
00770 to 01250
00470, 00620
S
FR-A7CN05
01540
-
S
FR-A7CN06
-
00770
S
FR-A7CN07
01870, 02330
00930, 01160, 01800
S
FR-A7CN08
-
02160
-
FR-A7CN09
-
02600
-
FR-A7CN10
03160, 03800, 04750
03250, 03610
-
FR-CB201
Extension cable straight plugs on both ends - 1 meter
FR-CB203
FR-CB205
FR-DU07
Extension cable straight plugs on both ends - 3 meters
Extension cable straight plugs on both ends - 5 meters
Control Panel for F700
LCD Multi-lingual Parameter Copy Unit (English,
French, Spanish, German, Italian, Swedish, Finnish,
Japanese) for operator control, parameter read/write and
monitoring. Stores settings in non-volatile memory. Builtin parameter copy capability. (F/A700 based)
PU07 with hand/auto and enhanced display functions
FR-DU07 panel mounting adapter
LCD Multi-lingual Parameter Copy Unit (English, French,
Spanish, German, Italian, Swedish, Finnish, Japanese) for
operator control, parameter read/write and monitoring.
Serial Communication Cable
Battery Powered PU07
Serial Network Hub - 2 Stations
Serial Network Hub - 8 Stations
Terminating Resistor for FR-RJ45-HUB
FR-A7AR
S
12 Bit Digital Input
FR-A7AX
S
FR-A7AY
S
FR-A7AZ
-
CC-Link
FR-A7NC
S
DeviceNet
FR-A7ND
S
LonWorks
FR-A7NL
S
Profibus DP
FR-A7NP
S
Network Type / Model
BACnet/IP
Ethernet/IP
Modbus/TCP
Profinet IO
BACnet MS/TP
Metasys N2
Siemens FLN
Stocked Item
BiPolar Analog Input
S
S
S
S
S
S
S
S
S
-
Building Management Options
Gateway
Communication
Function
Relay Output
Motor Thermistor
Communication
Description
SC-FRPC
FR-PU07BB-L
FR-RJ45-HUB4
FR-RJ45-HUB10
FR-RJ45-TR
Stocked Item
Stocked
Item
S
Model Number
FR-PU04
Model No.
High Res Analog Input
Parameter Units / Parameter Copy Units
Parameter units are used for operator control, reading and
writing parameters, and drive monitoring. Parameter Copy
Units also read the drive parameter settings and copy them into
non-volatile memory, and can write them into other drives.
FR-PU07-01
FR-ADP
Option Cards
Ext. Analog Output
Manuals available for download at www.meau.com
FR-PU07
Note:
1. Kits are coated zinc clear.
Digital Output
FR-F700 Installation Manual - Contains instructions
for installer and parameter list. (Included with VFD,
plus CD with all versions of VFD and option manuals.)
FR-F700 Basic Manual - Contains wiring details, VFD
layout drawings, alarm definitions and parameter
list.
FR-A7N-ETH FR-A7N-XLT
(*2,*3,*4)
(*2,*3,*4)
X
X
X
X
X
X
X
S
S
ETH-1000
(*5,*6)
X
X
X
X
X
X
-
XLTR-1000
(*5,*6)
X
X
-
Notes:
1. For additional information, visit www.iccdesigns.com
2. Physically mounts within VFD and powered by VFD
3. Deep control cover is required
4. FR-E7TR option recommended. (PU connector not available for use)
5. Communication to multiple VFD’s is possible
6. Mounted and powered external to VFD
F700 Demonstration Unit
Stocked
Item
Model Number
Description
VFD-F700-DEMO-2
Includes F720 1HP, pre-wired digital input switches,
LED outputs, speed potentiometer and analog meter
S
VFD-MOTOR-DEMO
Includes 1/2HP motor with quick connection to
VFD-F700-DEMO
S
Software
Model Number
FR-CONFIGURATOR
Description
Programming and diagnostic
software
Mitsubishi Electric Automation
|
Stocked Item
S
Variable Frequency Drives 359
n VARIABLE FREQUENCY DRIVES
Parameter Unit/Cable Reference List
VFD Model
FR-PA02
FR-PA02-02
FR-DU04
Parameter FR-PU04
Unit
FR-DU07
FR-PU07
FR-PU07BB-L
FR-PA07
Software FR-CONFIGURATOR
E560
D700
E700
1/2b
1/2b
2a
2a
3
2a
2a
2a
2a
3
2a
2a
2a
2a
2a
2a
3
A700
F700
2a
2a
c
1
2a
2a
3
Extension cables
1 = Direct mount
2 = FR-CB201, FR-CB203, FR-CB205 - Where 1, 3, 5 indicate length in meters
3 = SC-FRPC
Notes:
1. a = Will not mount directly on drive’s cover - cable required.
2. b = To remote mount on the enclosure panel, an extension cable and gender change
adapter (FR-E5P for E500,
SD-54258-8811 for F700) are required.
3. c = Included standard with VFD.
Dynamic Braking Options
Select the brake unit according to the motor capacity.
To obtain braking torque greater than 200%, use a larger inverter capacity.
Up to 10 FR-BU2 brake units can be connected in parallel for increased braking capacity.
%ED or Time at Short-Time Rating When Braking Torque is 100%
230V
460V
Brake Resistor
Model No.
Stocked
Item
1
2
3
5
7.5
10
15
20
25
30
40
50
60
FR-BU2-1.5K
S
BU-1500-TEIKOUKI
-
30 s
-
-
-
-
-
-
-
-
-
-
-
-
-
FR-BU2-3.7K
FR-BU2-7.5K
S
S
BU-3700-TEIKOUKI
BU-7.5K-TEIKOUKI
-
-
30 s
-
30 s
30 s
-
-
-
-
-
-
-
-
-
-
360
75
FR-BU2-15K
S
FR-BR-15K-UL
S
-
-
-
-
80%
40%
15%
10%
-
-
-
-
-
-
FR-BU2-30K
FR-BU2-55K
FR-BU2-H7.5K
FR-BU2-H15K
FR-BU2-H30K
FR-BU2-H55K
S
S
S
S
S
FR-BR-30K-UL
FR-BR-55K-UL
2 x BU-3700-TEIKOUKI
FR-BR-H15K-UL
FR-BR-H30K-UL
FR-BR-H55K-UL
S
S
S
S
-
-
30 s
-
30 s
-
80%
-
40%
-
65%
15%
65%
-
30%
10%
30%
-
25%
90%
25%
90%
15%
60%
15%
60%
10%
30%
10%
30%
20%
20%
15%
15%
10%
10%
Stocked
Item
Brake Resistor
Model No.
Stocked
Item
100
125
150
200
250
300
350
400
450
500
600
700
800
FR-BU2-H75K
S
MT-BR5-H75K
-
10%
5%
-
-
-
-
-
-
-
-
-
-
-
2 x FR-BU2-H75K
3 x FR-BU2-H75K
4 x FR-BU2-H75K
5 x FR-BU2-H75K
6 x FR-BU2-H75K
7 x FR-BU2-H75K
8 x FR-BU2-H75K
S
S
S
S
S
S
S
2 x MT-BR5-H75K
3 x MT-BR5-H75K
4 x MT-BR5-H75K
5 x MT-BR5-H75K
6 x MT-BR5-H75K
7 x MT-BR5-H75K
8 x MT-BR5-H75K
-
40%
90%
-
25%
60%
95%
-
15%
40%
70%
-
10%
20%
40%
60%
90%
-
5%
14%
25%
40%
55%
80%
-
10%
15%
25%
40%
55%
70%
5%
13%
20%
25%
40%
50%
5%
10%
15%
25%
35%
45%
5%
12%
15%
20%
30%
5%
10%
14%
15%
25%
5%
10%
13%
15%
5%
5%
10%
13%
5%
5%
10%
Brake Unit Model No.
460V
Motor Capacity (HP)
Stocked
Item
Brake Unit Model No.
Motor Capacity (HP)
Braking Torque (%) at Short-Time Rating of 30 Sec. for 5HP and Less
Braking Torque (%) at Short-Time Rating of 15 Sec. for 7.5HP and Larger
230V
460V
Brake Resistor
Model No.
Stocked
Item
FR-BU2-1.5K
FR-BU2-3.7K
FR-BU2-7.5K
S
S
S
BU-1500-TEIKOUKI
BU-3700-TEIKOUKI
BU-7.5K-TEIKOUKI
-
FR-BU2-15K
S
FR-BR-15K-UL
S
-
-
-
-
280% 200% 120% 100%
FR-BU2-30K
FR-BU2-55K
FR-BU2-H15K
FR-BU2-H30K
FR-BU2-H55K
S
S
S
S
FR-BR-30K-UL
FR-BR-55K-UL
FR-BR-H15K-UL
FR-BR-H30K-UL
FR-BR-H55K-UL
S
S
S
S
-
-
-
-
260% 180% 160% 130% 100%
300% 250% 180%
280% 200% 120% 100% 80% 70%
260% 180% 160% 130% 100%
300% 250% 180%
Brake Unit Model No.
460V
Motor Capacity (HP)
Stocked
Item
Brake Unit Model No.
FR-BU2-H75K
2 x FR-BU2-H75K
3 x FR-BU2-H75K
4 x FR-BU2-H75K
5 x FR-BU2-H75K
6 x FR-BU2-H75K
7 x FR-BU2-H75K
8 x FR-BU2-H75K
1
2
3
5
100% 50%
100% 50% 50%
100% 100%
Stocked
Item
Brake Resistor
Model No.
Stocked
Item
S
S
S
S
S
S
S
S
MT-BR5-H75K
2 x MT-BR5-H75K
3 x MT-BR5-H75K
4 x MT-BR5-H75K
5 x MT-BR5-H75K
6 x MT-BR5-H75K
7 x MT-BR5-H75K
8 x MT-BR5-H75K
-
7.5
-
10
-
15
-
20
-
25
-
30
-
40
-
80%
70%
-
50
-
60
-
75
-
-
-
-
80%
150%
80%
150%
70%
120%
70%
120%
100%
100%
Motor Capacity (HP)
100
125
150
200
250
300
350
400
100% 80% 65% 50% 40% 30% 28% 26%
200% 165% 135% 100% 80% 65% 55% 53%
300% 250% 200% 150% 120% 100% 85% 80%
300% 270% 200% 160% 135% 115% 105%
300% 250% 200% 170% 140% 130%
300% 240% 200% 170% 160%
280% 235% 200% 185%
270% 230% 210%
450
22%
44%
65%
85%
110%
130%
155%
175%
500
600
700
800
20%
40% 33% 28% 25%
60% 50% 43% 37%
80% 65% 55% 50%
100% 83% 70% 62%
120% 100% 85% 75%
140% 115% 100% 85%
160% 130% 110% 100%
Dynamic Braking Unit & Resistor Specifications
Stocked
Item
Brake Resistor
Model No.
Stocked
Item
Weight
kg / lbs
Resistance (Ohms)
Rated (Watts)
Continuous Permissible
Power (Watts)
FR-BU2-1.5K
S
BU-1500-TEIKOUKI
-
-
50
300
100
FR-BU2-3.7K
S
BU-3700-TEIKOUKI
-
-
30
900
300
FR-BU2-7.5K
S
BU-7.5K-TEIKOUKI
-
-
20
1800
600
FR-BU2-15K
S
FR-BR-15K-UL
S
15 / 33
8
4000
990
FR-BU2-30K
S
FR-BR-30K-UL
S
30 / 66
4
8000
1990
Brake Unit Model No.
230V
460V
FR-BU2-55K
-
FR-BR-55K-UL
-
70 / 154
2
16000
3910
FR-BU2-H7.5K
S
2 x BU-3700-TEIKOUKI
-
-
60
1800
600
FR-BU2-H15K
S
FR-BR-H15K-UL
S
15 / 33
32
4000
990
FR-BU2-H30K
S
FR-BR-H30K-UL
S
30 / 66
16
8000
1990
FR-BU2-H55K
S
FR-BR-H55K-UL
S
70 / 154
8
16000
3910
FR-BU2-H75K
S
MT-BR5-H75K
-
70 / 154
6.5
30000
7500
Mitsubishi Electric Automation
|
Variable Frequency Drives 361
n VARIABLE FREQUENCY DRIVES
F700 Dynamic Braking Units and Resistors - UFS Series
•
•
•
•
•
A more economical solution to regenerative braking applications
UL and cUL listing for the brake units
Internal Form-C relay
Adjustable DC bus brake turn-on voltage
Configurable master / slave brake configuration. Allows connection of up to 5 brake units (1 master / 4 slaves)
240V Series
HP
kW
Brake Unit
Brake Resistor
Continuous Permissible Power (W)
Resistance (Overall)
Continuous Current (Amps)
Braking
Torque
100% For
15 Secs.
Electrical
Data
7.5
5.5
10
7.5
15
11
UFS22J
Motor Capacity
25
30
18.5
22
20
15
40
30
50
37
60
75
45
55
2 x UFS40J
2 x RUFC40J
2ea x UFS40J - 4000W
2ea x RUFC40J - 3.75ohms
29.2A
UFS40J
RUFC40J
UFS40J - 2000W
RUFC40J - 7.5ohms
14.6A
RUFC15J
RUFC22J
UFS22J - 1500W
RUFC15J - 24ohms
RUFC22J - 12ohms
7A
10A
460V Series
Motor Capacity
Braking
Torque
HP
7.5
10
15
25
30
40
50
60
75
kW
5.5
7.5
11
18.5
22
30
37
45
55
100% For
15 Secs.
Brake Unit
Electrical
Data
UFS22
Brake Resistor
RUFC15/480
RUFC22/480
Continuous Permissible Power (W)
Resistance (Overall)
UFS40
RUFC40/480
UFS22 - 2000W
UFS40 - 4000W
RUFC15/480 - 44ohms
RUFC22/480 - 27ohms
RUFC40/480 - 15ohms
6A
7.7A
14.6
Continuous Current (Amps)
Motor Capacity
Braking
Torque
100% For
15 Secs.
Electrical
Data
HP
100
125
150
175
215
300
375
kW
Brake Unit
Brake Resistor
75
90
110
132
160
220
2 X UFS110
2 X RUFC110/480
280
UFS110
RUFC110/480
Continuous Permissible Power (W)
Resistance (Overall)
UFS110 - 8000W
2 x UFS110 - 16000W
RUFC110/480 - 6.8ohms
2 x RUFC110/480 - 3.4ohms
30.7A
61.4A
Continuous Current (Amps)
Dimensions
Height
Model Number
UFS20J
UFS40J
240V
RUFC15J
Width
mm
inches
250
9.8
240
9.5
RUFC22J
310
12.2
RUFC40J
365
14.4
250
9.8
UFS22
UFS40
UFS110
480V
362
RUFC15/480
310
12.2
RUFC22/480
365
14.4
mm
100
Approximate
Weight
Depth
inches
mm
inches
kg
lbs
175
6.9
2.5
5.5
2.8
6.2
3.9
75
3
Stocked
Item
S
S
S
3.5
7.7
S
4.3
9.5
S
100
3.9
175
6.9
2.5
5.5
107
4.2
195
7.7
3.9
8.6
100
3.9
75
3
S
S
S
3.5
7.7
S
4.2
9.3
S
RUFC40/480
2 x 365
2 x 14.4
2 x 100
2 x 3.9
2 x 75
2x3
8.7
19.2
S
RUFC110/480
4 x 365
4 x 14.4
4 x 100
4 x 3.9
4 x 75
4x3
17.3
38.1
S
F700 VFD Efficiency Values
240VAC 3-Phase Input
Model Number
Rated
Watts
Watts
Efficiency
Loss SLD
SLD
480VAC 3-Phase Input
Watts
Loss LD
Efficiency
LD
Model Number
Rated
Watts
Watts
Efficiency
Loss SLD
SLD
Watts
Loss LD
Efficiency
LD
93%
FR-F720-00046-NA
750
70
91%
60
92%
FR-F740-00023-NA
750
60
92%
50
FR-F720-00077-NA
1500
110
93%
100
93%
FR-F740-00038-NA
1500
80
95%
80
95%
FR-F720-00105-NA
2200
140
94%
130
94%
FR-F740-00052-NA
2200
100
95%
90
96%
FR-F720-00167-NA
3700
210
94%
190
95%
FR-F740-00083-NA
3700
160
96%
140
96%
FR-F720-00250-NA
5500
300
95%
260
95%
FR-F740-00126-NA
5500
190
97%
180
97%
FR-F720-00340-NA
7500
370
95%
340
95%
FR-F740-00170-NA
7500
240
97%
220
97%
FR-F720-00490-NA
11000
590
95%
530
95%
FR-F740-00250-NA
11000
340
97%
310
97%
FR-F720-00630-NA
15000
660
96%
580
96%
FR-F740-00310-NA
15000
390
97%
350
98%
FR-F720-00770-NA
18500
910
95%
810
96%
FR-F740-00380-NA
18500
490
97%
440
98%
FR-F720-00930-NA
22000
1050
95%
940
96%
FR-F740-00470-NA
22000
580
97%
520
98%
FR-F720-01250-NA
30000
1540
95%
1370
95%
FR-F740-00620-NA
30000
810
97%
710
98%
FR-F720-01540-NA
37000
1490
96%
1320
96%
FR-F740-00770-NA
37000
1000
97%
930
97%
FR-F720-01870-NA
45000
1680
96%
1490
97%
FR-F740-00930-NA
45000
1170
97%
1030
98%
FR-F720-02330-NA
55000
2210
96%
1950
96%
FR-F740-01160-NA
55000
1510
97%
1320
98%
FR-F720-03160-NA
75000
2825
96%
2500
96%
FR-F740-01800-NA
75000
2700
96%
2250
97%
FR-F720-03800-NA
90000
3165
96%
2800
96%
FR-F740-02160-NA
90000
3300
96%
2700
97%
FR-F720-04750-NA
110000
4070
96%
3600
96%
FR-F740-02600-NA
110000
3960
96%
3300
97%
-
-
-
-
-
-
FR-F740-03250-NA
132000
4800
96%
3960
97%
-
-
-
-
-
-
FR-F740-03610-NA
160000
5550
97%
4800
97%
-
-
-
-
-
-
FR-F740-04320-NA
185000
6600
96%
5550
97%
-
-
-
-
-
-
FR-F740-04810-NA
220000
7500
97%
6600
97%
-
-
-
-
-
-
FR-F740-05470-NA
250000
8400
97%
7500
97%
-
-
-
-
-
-
FR-F740-06100-NA
280000
9450
97%
8400
97%
-
-
-
-
-
-
FR-F740-06830-NA
315000
10650
97%
9450
97%
-
-
-
-
-
-
FR-F740-07700-NA
355000
12000
97%
10650
97%
-
-
-
-
-
-
FR-F740-08660-NA
400000
13500
97%
12000
97%
-
-
-
-
-
-
FR-F740-09620-NA
450000
15000
97%
13500
97%
-
-
-
-
-
-
FR-F740-10940-NA
500000
16800
97%
15000
97%
-
-
-
-
-
-
FR-F740-12120-NA
560000
18900
97%
16800
97%
General Notes:
1. The amount of heat generated by the inverter is based on one inverter connected to one motor of the same capacity.
2. The amount of heat generated in the above table is the amount of heat generated when the inverter is operated at its rated current.
3. The amount of heat generated will decrease according to the motor load and usage (duty).
4. When using the external heat sink attachment watt loss decreases by 60%.
Mitsubishi Electric Automation
|
Variable Frequency Drives 363
n VARIABLE FREQUENCY DRIVES
A700 Series
Mitsubishi Electric’s RSV technology gives you class-leading power, control and flexibility.
• Brake Transistor Circuit: Included in all sizes
up to 30 Hp
• Integral Radio Filter: Limits Radio Noise
emissions to meet EU Directive - all sizes of drive
• Speed Control: with or without torque limit allows
200:1 Speed range, driving or overhauling
• Open Loop Torque Control: including torque at
zero speed
• UL Listed for single-phase input
• Wide Speed Range: 200:1 operating range is possible - even when the drive is used ‘open loop’
• PLC Feature: A700 programmability provides true
intelligence inside the drive - a simple
solution for complex applications
• Easy Gain Tuning: Compensates automatically
for changes in load inertia to ensure smooth and
consistent operation
• Fast Response: Up to 300 radians / second speed
response means lightning fast reaction to sudden
load changes
• USB Port: Allows simple connection to the new
FR-Configurator Software for quick and easy
commissioning
• Power Down Braking: Keeps the motor under
control even if the supply power is lost
• Remote I / O Capability: All of the drive I/O can be
read or controlled over a network
Voltage
240
3/4 – 200 Hp
480
3/4 – 800 Hp
600
1 – 650 Hp
Horsepower
A700 Ratings 240V Class
Output voltage: 3 phase 200-240V at 60Hz - Voltage Tolerance 170-264V at 60Hz
ND (50°C)
150% OL / 1 min
200% OL / 3 sec
HD (50°C)
200% OL / 1 min
250% OL / 3 sec
LD (50°C)
120% OL / 1 min
150% OL / 3 sec
SLD (40°C)
110% OL / 1 min
120% OL / 3 sec
Hp (*1)
FLA
Hp (*1)
FLA
Hp (*1)
FLA
Hp (*1)
FLA
1/2
1
2
3
5
8
1/4
1/2
1
1.5
3
5
1
2
3
4.2
6.5
9.6
1
2
3
4.6
7.1
10.5
Model Number (*6)
Frame
Size
Cooling
Method
FR-A720-00030-NA
FR-A720-00050-NA
FR-A720-00080-NA
A
B
C
Self
Cooling
3
11
2
8
5
15.2
5
16.7
FR-A720-00110-NA
C
5
17.5
3
11
7.5
24
7.5
25
FR-A720-00175-NA
C
7.5
24
5
17.5
10
31
10
34
FR-A720-00240-NA
D
10
33
7.5
24
15
45
15
49
FR-A720-00330-NA
D
1/2
3
1/4
1.5
1
4.2
1
4.6
FR-A720-00030-N4
A (*5)
1
5
1/2
3
2
6.5
2
7.1
FR-A720-00050-N4
B (*5)
2
8
1
5
3
9.6
3
10.5
FR-A720-00080-N4
C (*5)
3
11
2
8
5
15.2
5
16.7
FR-A720-00110-N4
C (*5)
5
17.5
3
11
7.5
24
7.5
25
FR-A720-00175-N4
C (*5)
7.5
24
5
17.5
10
31
10
34
FR-A720-00240-N4
D (*5)
10
33
7.5
24
15
45
15
49
FR-A720-00330-N4
D (*5)
15
46
10
33
20
58
20
63
FR-A720-00460-NA
E
20
61
15
46
25
70
25
77
FR-A720-00610-NA
F
25
76
20
61
30
85
30
93
FR-A720-00760-NA
F
30
90
25
76
40
114
40
125
FR-A720-00900-NA
F
40
115
30
90
50
140
50/60
154
FR-A720-01150-NA
G
50
145
40
115
60
170
60
187
FR-A720-01450-NA
H
60
75
175
215
50
60
145
175
75
100
212
288
75
100/125
233
316
FR-A720-01750-NA
FR-A720-02150-NA
H
JA
Forced Air
Cooling
Protective
Rating
NEMA 1
(*2)
Self
Cooling
Regenerative
Braking Torque
/ Max Value
(Permissible Duty)
Stocked
Item
150% torque /
3% ED
S
S
S
S
100% torque /
3% ED
S
100% torque /
2% ED
S
S
-
150% torque /
3% ED
UL Type
1 - Plenum
Rated
-
100% torque /
3% ED
-
100% torque /
2% ED
-
S
20% torque /
continuous (brake
transistor included)
Forced Air
Cooling
S
S
S
S
IP00 (*3)
S
20% torque /
continuous
S
S
A700 Ratings 240V Class
Output voltage: 3 phase 200-240V at 60Hz - Voltage Tolerance 170-264V at 60Hz - DC Link Choke is included with the VFD
ND (50°C)
150% OL / 1 min
200% OL / 3 sec
Hp
FLA
HD (50°C)
200% OL / 1 min
250% OL / 3 sec
Hp
FLA
LD (50°C)
120% OL / 1 min
150% OL / 3 sec
Hp
FLA
SLD (40°C)
110% OL / 1 min
120% OL / 3 sec
Hp
FLA
Model Number
(*6)
Frame
Size
Cooling
Method
Protective
Rating
Regenerative
Braking Torque
/ Max Value
(Permissible Duty)
Forced Air
Cooling
IP00 (*3)
10% torque /
continuous
100
288
75
215
125
346
150
380
FR-A720-02880-NA
K
125
346
100
288
150
432
200
475
FR-A720-03460-NA
K
Notes: See next page.
364
Stocked
Item
-
A700 Ratings 480V Class
Output voltage: 3 phase 380-480V at 60Hz - Voltage Tolerance 323-528V at 60Hz.
ND (50°C)
HD (50°C)
LD (50°C)
SLD (40°C)
150% OL / 1 min
200% OL / 1 min
120% OL / 1 min
110% OL / 1 min
200% OL / 3 sec
250% OL / 3 sec
150% OL / 3 sec
120% OL / 3 sec
Model Number (*6)
Frame
Size
Hp (*1)
FLA
Hp (*1)
FLA
Hp (*1)
FLA
Hp (*1)
FLA
1/2
1.5
1/4
0.8
1
2.1
1
2.3
FR-A740-00015-NA
C
1
2.5
1/2
1.5
2
3.5
2
3.8
FR-A740-00025-NA
C
2
4
1
2.5
3
4.8
3
5.2
FR-A740-00040-NA
C
3
6
2
4
5
7.6
5
8.3
FR-A740-00060-NA
C
5
9
3
6
7.5
11.5
7.5
12.6
FR-A740-00090-NA
C
7.5
12
5
9
10
16
10
17
FR-A740-00120-NA
D
10
17
7.5
12
15
23
15
25
FR-A740-00170-NA
D
1/2
1.5
1/4
0.8
1
2.1
1
2.3
FR-A740-00015-N4
C (*5)
1
2.5
1/2
1.5
2
3.5
2
3.8
FR-A740-00025-N4
C (*5)
2
4
1
25
3
4.8
3
5.2
FR-A740-00040-N4
C (*5)
3
6
2
4
5
7.6
5
8.3
FR-A740-00060-N4
C (*5)
5
9
3
6
7.5
11.5
7.5
12.6
FR-A740-00090-N4
C (*5)
7.5
12
5
9
10
16
10
17
FR-A740-00120-N4
D (*5)
10
17
7.5
12
15
23
15
25
FR-A740-00170-N4
D (*5)
15
23
10
17
20
29
20
31
FR-A740-00230-NA
E
20
31
15
23
25
35
25
38
FR-A740-00310-NA
E
25
38
20
31
30
43
30
47
FR-A740-00380-NA
F
30
44
25
38
40
57
40
62
FR-A740-00440-NA
F
40
57
30
44
50
70
50/60
77
FR-A740-00570-NA
G
50
71
40
57
60
85
60
93
FR-A740-00710-NA
H
60
86
50
71
75
106
75
116
FR-A740-00860-NA
H
75
110
60
86
100
144
100/150
180
FR-A740-01100-NA
H
Cooling
Method
Protective
Rating
Regenerative
Braking Torque
/ Max Value
(Permissible
Duty)
Stocked Item
S
Self
Cooling
S
NEMA 1
(*2)
100% torque /
2% ED
S
S
S
Forced Air
Cooling
S
S
-
Self
Cooling
100% torque /
2% ED
UL Type 1
- Plenum
Rated
-
20% torque /
continuous
(brake transistor included)
Forced Air
Cooling
-
S
S
S
S
S
IP00 (*4)
20% torque /
continuous
S
S
S
Notes: See below.
A700 Ratings 480V Class
Output voltage: 3 phase 380-480V at 60Hz - Voltage Tolerance 323-528V at 60Hz - DC Link Choke is included with the VFD.
ND (50°C)
HD (50°C)
LD (50°C)
SLD (40°C)
150% OL / 1 min
200% OL / 1 min
120% OL / 1 min
110% OL / 1 min
200% OL / 3 sec
250% OL / 3 sec
150% OL / 3 sec
120% OL / 3 sec
Hp (*1)
FLA
Hp (*1)
FLA
Hp (*1)
FLA
Hp (*1)
FLA
100
144
75
110
150
180
150
216
Model Number (*6)
Frame
Size
FR-A740-01440-NA
J
Cooling
Method
Protective
Rating
Regenerative
Braking Torque
/ Max Value
(Permissible
Duty)
Stocked Item
S
150
180
100
144
150
216
200
260
FR-A740-01800-NA
J
S
150
216
150
180
200
260
250
325
FR-A740-02160-NA
K
S
200
260
150
216
250
325
300
361
FR-A740-02600-NA
K
S
250
325
200
260
300
361
350
432
FR-A740-03250-NA
L
300
361
250
325
350
432
400
481
FR-A740-03610-NA
L
350
432
300
361
400
481
450
547
FR-A740-04320-NA
M
400
481
350
432
450
547
500
610
FR-A740-04810-NA
M
450
547
400
481
500
610
550
683
FR-A740-05470-NA
M
S
IP00 (*4)
S
Forced Air
Cooling
10% torque /
continuous
S
S
S
500
610
450
547
550
683
650
770
FR-A740-06100-NA
N
-
550
683
500
610
650
770
700
866
FR-A740-06830-NA
N
-
650
770
550
683
700
866
800
962
FR-A740-07700-NA
P
IP00
-
700
866
650
770
800
962
900
1094
FR-A740-08660-NA
P
-
800
962
700
866
900
1094
1000
1212
FR-A740-09620-NA
P
-
Notes:
1. Motor ratings shown are intended as guidelines only - based on 4 pole standard inductions motors.
2. UL Type 1 version drives are available - replace “-NA” suffix with “-N4”.
3. Conduit adapter option required for types 01150 - 03460.
4. Conduit adapter option required for types 00570 - 05470.
5. Depth is slightly extended to meet UL Type 1 requirements.
6. For single phase input, derate output current by 40% (Models up to FR-A720-02880-NA and FR-A740-03610-NA)
Mitsubishi Electric Automation
|
Variable Frequency Drives 365
n VARIABLE FREQUENCY DRIVES
A700 Ratings 600V Class
Output voltage: 3 phase 525-600V at 60Hz - Voltage Tolerance 472-660V at 60Hz
ND (40°C)
150% OL / 1 min
200% OL / 3 sec.
HP (*1)
FLA
1
1.7
HD (40°C)
200% OL / 1 min
250% OL / 3 sec.
280% OL / 0.5
sec.
HP (*1)
FLA
1/2
1.0
LD (40°C)
120% OL / 1 min
SLD (40°C) (30°C
for 00040 or less)
110% OL / 1 min
150% OL / 3 sec.
120% OL / 3 sec.
HP (*1)
FLA
HP (*1)
FLA
1 1/2
2.5
2
2.7
Model Number
Frame
Size
FR-A760-00017-NA
C
3
4.0
2
2.7
3
5.6
5
6.1
FR-A760-00040-NA
5
6.1
3
4.0
5
8.2
7 1/2
9.0
FR-A760-00061-NA
10
12
7 1/2
9.0
10
16
15
17
FR-A760-00120-NA
D
20
22
10
16
25
27
30
32
FR-A760-00220-NA
E
30
33
20
24
40
41
40
45
FR-A760-00330-NA
F
50
55
40
41
60
62
60
68
FR-A760-00550-NA
75
84
60
63
100
99 (*2)
100
ND (50°C)
150% OL / 1 min
HD (40°C)
200% OL / 1 min
250% OL / 3 sec.
200% OL / 3 sec. 280% OL / 0.5 sec.
HP
FLA
HP (*1)
FLA
(*1)
100
104
75
84
125
131
100
104
LD (50°C)
120% OL / 1 min
108 (*2) FR-A760-00840-NA
Protective
Rating
Self cooling
UL Type 1
(*3)
110% OL / 1 min
120% OL / 3 sec.
HP (*1)
HP (*1)
Model Number
125
131
150
144
FR-A760-01040-NA
152
150
167
FR-A760-01310-NA
H
Frame
Size
152
125
131
200
221
250
243
FR-A760-01520-NA
221
150
152
250
255
300
289
FR-A760-02210-NA
250
255
200
202
300
304
350
336
FR-A760-02550-NA
300
304
250
255
400
402
450
442
FR-A760-03040-NA
M
N
402
300
304
500
496
550
545
FR-A760-04020-NA
496
400
402
600
589
650
647
FR-A760-04960-NA
650
663
600
589
750
773
850
850
FR-A760-06630-NA
IP00 (*4)
20% torque /
continuous
Cooling
Method
Protective
Rating
Regenerative
Braking Torque
/ Max Value
(Permissible
Duty)
Option
S
S
S
S
S
DC Link
Reactor
Stocked
Item
S
S
IP00 (*4)
L
P
Forced air
cooling
20% torque /
continuous
S
Standard
S
-
IP00
Notes:
1. Motor ratings shown are intended as guidelines only - based on 4 pole standard induction motors.
2. To utilize these ratings, DC Link reactor is required.
3. These models supplied with an externally connected brake resistor. When the external brake resistor is used, protective rating is open type (NEMA1).
4. Conduit adapter option required for types 00550-03040.
366
S
S
150
400
-
100% torque /
2% ED
J
200
500
DC Link Stocked
Reactor
Item
S
FLA
150
Regenerative
Braking Torque
/ Max Value
(Permissible
Duty)
20% torque /
Forced air
continuous
UL Type 1
cooling
(brake transistor
included)
SLD (40°C)
150% OL / 3 sec.
FLA
Cooling
Method
S
-
A700 Terminal Connection Diagram
A700 Control Terminal Layout
A1
RL
SE
B1
RM
RUN
C1
RH
SU
A2
RT
IPF
B2
AU
OL
C2
10E
STOP MRS
FU
SD
SD
10
RES
STF
2
SD
STR
5
FM
JOG
4
AM
1
CS
PC
Mitsubishi Electric Automation
|
Variable Frequency Drives 367
Control Method
Output Frequency Range
Frequency
Setting
Resolution
Analog Input
Digital Input
Analog Input
Digital Input
Voltage / Frequency
Characteristics
Starting Torque
Torque Boost
Acceleration / Deceleration
Time Setting
DC Injection Brake
Stall Prevention Operation
Level
Torque Limit Level
Frequency
Analog Input
Setting
Digital Input
Signal
Start Signal
Frequency
Accuracy
Soft-PWM control/high carrier frequency PWM control (selectable from among V/F control, advanced magnetic flux vector control and
real sensorless vector control) / vector control (when used with option FR-A7AP) (*1)
0.2 to 400Hz
0.015Hz/0 to 60Hz (terminal 2, 4: 0 to 10V/12 bit); 0.03Hz/0 to 60Hz (terminal 2, 4: 0 to 5V/11 bit, 0 to 20mA/about 11 bit, terminal 1: 0 to
±10V/12 bit) 0.06Hz/0 to 60Hz (terminal 1: 0 to ±5V/11 bit)
0.01Hz
Within ±0.2% of the max. output frequency (25°C ±10°C)
Within 0.01% of the set output frequency
Base frequency can be set from 0 to 400Hz Constant torque/variable torque pattern or adjustable 5 points V/F can be selected
200% 0.3Hz (up to frame size C), 150% 0.3Hz (Frame Size D and above) (under real sensorless vector control or vector control)
Manual torque boost
0 to 3600s (acceleration and deceleration can be set individually), linear or S-pattern acceleration/deceleration mode, backlash measures acceleration/deceleration can be selected.
Operation frequency (0 to 120Hz), operation time (0 to 10s), operation voltage (0 to 30%) variable
Operation current level can be set (0 to 220% adjustable), whether to use the function or not can be selected
Torque limit value can be set (0 to 400% variable)
Terminal 2: 4: 0 to 10V, 0 to 5V, 4 to 20mA can be selected • Terminal 1:-10 to +10V, -5 to +5V can be selected
Input using the setting dial of the operation panel or parameter unit. Four-digit BCD or 16 bit binary (when used with option FR-A7AX)
Indication
Operation Specifications
Forward and reverse rotation or start signal automatic self-holding input (3-wire input) can be selected.
Select any twelve signals using Pr. 178 to Pr. 189 (input terminal function selection) from among multi speed selection, remote setting, stop-on-contact,
second function selection, third function selection, terminal 4 input selection, JOG operation selection, selection of automatic restart after instantaneous
power failure, flying start, external thermal relay input, inverter operation enable signal (FR-HC/FR-CV connection), FR-HC connection (instantaneous
power failure detection), PU operation/external inter lock signal, external DC injection brake operation start, PID control enable terminal, brake opening
completion signal, PU operation/external operation switchover, load pattern selection forward rotation reverse rotation boost, V/F switching, load torque
Input Signal
high-speed frequency, S-pattern acceleration/deceleration C switchover, pre-excitation, output stop, start self-holding selection, control mode changing,
torque limit selection, start-time tuning start external input, torque bias selection 1, 2 (*1), P/PI control switchover, forward rotation command, reverse
rotation command, inverter reset, PTC thermistor input, PID forward reverse operation switchover, PU-NET operation switchover, NET-external operation
switchover, and command source switchover, conditional position pulse train sign (*1), conditional position droop pulse clear (*1).
100kpps
Pulse Train Input
Maximum/minimum frequency setting, frequency jump operation, external thermal relay input selection, polarity reversible operation, automatic
restart after instantaneous power failure operation, commercial power supply-inverter switchover operation, forward/reverse rotation prevention,
remote setting, brake sequence, second function, third function, multi-speed operation, original operation continuation at instantaneous power failOperational Functions
ure, stop-on-contact control, load torque high speed frequency control, droop control, regeneration avoidance, slip compensation, operation mode
selection, offline auto tuning function, online auto tuning function, PID control, computer link operation (RS-485), motor end orientation (*1),
machine end orientation (*1), pre-excitation, notch filter, machine analyzer (*1), easy gain tuning, speed feed forward, and torque bias (*1)
Select any signals using Pr. 190 to Pr. 196 (output terminal function selection) from among inverter running, up-to-frequency, instantaneous
power failure/undervoltage, overload warning, output frequency (speed) detection, second output frequency (speed) detection, third output frequency (speed) detection, regenerative brake prealarm, electronic thermal relay function pre-alarm, PU operation mode, inverter operation ready,
output current detection, zero current detection, PID lower limit, PID upper limit, PID forward rotation reverse rotation output, commercial power
supply-inverter switchover MC1, commercial power supply-inverter switchover MC2, commercial power supply-inverter switchover MC3, orientaOperating
tion completion (*1), brake opening request, fan fault output, heatsink overheat pre-alarm , inverter running/start command on, deceleration at an
Status
instantaneous power failure, PID control activated, during retry, PID output interruption, life alarm, alarm output 1, 2, 3 (power-off signal), power
Output
savings average value update timing, current average monitor, maintenance timer alarm, remote output, forward rotation output (*1), reverse rotaSignals
tion output (*1), low speed output, torque detection, regenerative status output (*1), start-time tuning completion, in-position completion (*1),
minor failure output and alarm output. Open collector output (5 points), relay output (2 points) and alarm code of the inverter can be output (4 bit)
from the open collector.
Using FR-A7AY, In addition to the above, select any signals using Pr. 313 to Pr. 319 (extension output terminal function selection) from among control circuit
FR-A7AR
capacitor life, main circuit capacitor life, cooling fan life, inrush current limit circuit life (only positive logic can be set for extension terminals of the
(optional)
FR-A7AR).
Pulse Train Input
500kpps
Select any signals using Pr. 54 FM terminal function selection (pulse train output) and Pr. 158 AM terminal function selection (analog output) from
among output frequency, motor current (steady or peak value), output voltage, frequency setting, operation speed, motor torque, converter output
Pulse / Analog Output
voltage (steady or peak value), electronic thermal relay function load factor, input power, output power, load meter, motor excitation current,
reference voltage output, motor load factor, power saving effect, regenerative brake duty, PID set point, PID measured value, motor output, torque
command, torque current command, and torque monitor.
Output frequency, motor current (steady or peak value), output voltage, frequency setting, running speed,motor torque, overload, converter output voltage (steady or peak value), electronic thermal relay function load factor, input power, output power, load meter, motor excitation current,
Operating
cumulative energization time, actual operation time, motor load factor, cumulative power, energy saving effect, cumulative saving power, regeneraStatus
tive brake duty, PID set point, PID measured value, PID deviation, inverter I/O terminal monitor, input terminal option monitor (*2), output terminal
PU (FRoption monitor (*2), option fitting status (*3), terminal assignment status (*3), torque command, torque current command, feed back pulse (*1),
DU07 /
motor output
FR-PU07 /
Alarm
Alarm definition is displayed when the protective function is activated, the output voltage/current/frequency/cumulative energization time right
FR-PU04)
Definition
before the protection function was activated and past 8 alarm definitions are stored.
Interactive
Operation guide/trouble shooting with a help function (*3)
Guidance
Overcurrent during acceleration, overcurrent during constant speed, overcurrent during deceleration, overvoltage during acceleration, overvoltage during constant speed, overvoltage during deceleration, inverter protection thermal operation, motor protection thermal operation, heatsink
overheat, instantaneous power failure occurrence, undervoltage, input phase failure, motor overload, output side earth (ground) fault overcurrent,
output short circuit, main circuit element overheat, output phase failure, external thermal relay operation, PTC thermistor operation, option alarm,
parameter error, PU disconnection, retry count excess, CPU alarm, operation panel power supply short circuit, 24VDC power output short circuit,
Protective / Warning Function
output current detection value excess, inrush current limit circuit alarm, communication alarm (inverter), USB error, opposite rotation deceleration
error, analog input error, fan fault, overcurrent stall prevention, overvoltage stall prevention, regenerative brake prealarm, electronic thermal relay
function prealarm, PU stop, maintenance timer alarm (*2), brake transistor alarm, parameter write error, copy operation error, operation panel
lock, parameter copy alarm, speed limit indication, encoder no-signal (*1), speed deviation large (*1), overspeed (*1), position error large (*1),
encoder phase error (*1)
Ambient Temperature
-10°C to +50°C (non-freezing)
Ambient Humidity
90%RH maximum (non-condensing)
Storage Temperature (*4)
-20°C to +65°C
Atmosphere
Indoors (without corrosive gas, flammable gas, oil mist, dust and dirt etc.)
Altitude / Vibration
Maximum 1000m above sea level, 0.6 G or less (*5) (conforms to JIS C 60068-2-6)
Environment
n VARIABLE FREQUENCY DRIVES
A700 General Specifications
Notes:
1. Available only when the option (FR-A7AP) is mounted
2. Can be displayed only on the operation panel (FR-DU07).
3. Can be displayed only on the parameter unit (FR-PU07/FR-PU04).
4. Temperature applicable for a short period in transit, etc.
5. 2.9m/s2 or less for the FR-A740-03250 or more.
368
A700 Options
Instruction Manuals
Function
Function / Options
Model No.
Stocked
item
120VAC Control Input
FR-A7AC
S
Analog I/O
FR-A7AN
S
Encoder Feedback
FR-A7AP
S
Encoder Pulse Dividing Output
FR-A7AL
S
Relay Output
FR-A7AR
S
12 Bit Digital Input
FR-A7AX
S
FR-A7AY
S
Digital Output
Ext. Analog Output
IB(NA)0600254
FR-A700 Basic Manual - Contains wiring details, VFD
layout drawings, alarm definitions and parameter list.
IB(NA)0600225
FR-A700 Applied Manual - Contains wiring details, VFD layout
drawings, alarm definitions and complete parameter list with
definitions and setting examples.
IB(NA)0600255
FR-A700 PLC Programming Manual - Contains
complete instruction sets for PLC feature.
IB(NA)0600262
FR-PU07 Manual - Contains complete instruction sets
and screen definitions.
IB(NA)0600240
FR-A7AZ
-
FR-A7NC
S
Network Type / Model
ControlNET
FR-A7NCN
S
DeviceNet
FR-A7ND
S
BACnet/IP
Ethernet/IP
Modbus/TCP
Profinet IO
BACnet MS/TP
Metasys N2
Siemens FLN
Stocked Item
Building Management Options
CC-Link
EtherNET IP
FR-A7NE
S
LonWorks
FR-A7NL
S
Profibus DP
FR-A7NP
S
SSCNET III
FR-A7NS
S
Gateway
Communication
Motor Thermistor
Communication
Model Number
FR-A700 Installation Manual - Contains instructions for
installer and parameter list. (Included with VFD, plus CD with
all versions of VFD and option manuals.)
Manuals available for download at www.meau.com
BiPolar Analog Input
High Res Analog Input
Description
External Heatsink Attachment
Drive Model
A720
A740
00080 to 00175
00025 to 00090
00240, 00330
00460
00610 to 00900
01150
00120, 00170
00230, 00310
00380, 00440
01450, 01750
01800
A760
00017, 00040,
00061
00120
00220
00330
00550, 00840
01040, 01310,
01520
-
02160, 02600
00570
00710 to 01100
01440
03160, 03800,
04750
02150
Model
Number
Stocked
Item
FR-A7CN01
S
FR-A7CN02
FR-A7CN03
FR-A7CN04
FR-A7CN05
FR-A7CN06
FR-A7CN07
S
S
S
S
S
S
FR-A7N-ETH FR-A7N-XLT
(*2,*3,*4)
(*2,*3,*4)
X
X
X
X
X
X
X
S
S
Conduit Attachments
Drive Model
FR-A7FN05 (*4)
00900
-
-
5.9
5
-
01150
00570
-
6.2
5
S
00710 to
01100
00550,
00840
9
15
S
01440,
01800
02160,
02600
03250,
03610
04320 to
05470
01040 to
01520
24
41
S
-
24
45
S
02210,
02550
26
50
S
03040
26
64
S
-
FR-A7FN07 (*4)
01450,
01750
-
FR-A7CN10
-
-
FR-A7CN11
-
FR-A7FN-11 (*3)
-
FR-A7FN-12 (*3)
02880,
03460
FR-A7FN-13 (*3)
-
FR-A7FN-14 (*3)
-
FR-CONFIGURATOR
Programming and diagnostic software
Stocked Item
S
F700 Demonstration Unit
Model
Number
Description
VFD-A700DEMO
Includes A720 1/2HP, pre-wired digital input switches, LED outputs, two potentiometers, analog meter and encoder option
VFD-MOTOR- Includes 1/2HP motor and encoder with quick connections to
ENC-DEMO
VFD-A700-DEMO
Stocked
Item
Stkd.
Item
A720
(*1, *2)
FR-A7CN09
Software
Length
Weight
(in)
(lbs)
(*5)
Model Number
FR-A7CN08
Description
XLTR-1000
(*5,*6)
X
X
-
Notes:
1. For additional information, visit www.iccdesigns.com
2. Physically mounts within VFD and powered by VFD
3. Deep control cover is required
4. FR-E7TR option recommended. (PU connector not available for use)
5. Communication to multiple VFD’s is possible
6. Mounted and powered external to VFD
FR-A7FN06 (*4)
Model Number
ETH-1000
(*5,*6)
X
X
X
X
X
X
-
A740
(*1, *2)
A760
(*1, *2)
Notes:
1. FR-A720-00460 to 00760 & FR-A740-00230 to 00440 are UL Type 1: the conduit adapter is
included as standard.
2. FR-A700 smaller than listed above, the UL Type 1 version (conduit adapter standard) is a
special type: Change from suffix -NA to -N4.
3. Mounting hardware included for standard DC chokes which ship with VFD. Kits are powder
coated similar to VFD charcoal gray.
4. Kits are coated zinc clear.
5. Width and depth of kit match the asscociated VFD
S
S
Mitsubishi Electric Automation
|
Variable Frequency Drives 369
n VARIABLE FREQUENCY DRIVES
Factory Supplied DC Link Chokes
Standard With VFD
Drive Model
DC Link Model No.
Dimensions inches (mm)
mH
Amps
Height
Depth
Approx Weight
lb (kg)
FR-A740-01440-NA
FR-HEL-H110K
0.246
233
13.4 (340)
5.9 (150)
7.7 (195)
22 (48)
FR-A740-01880-NA
FR-HEL-H132K
0.204
281
15.9 (405)
6.9 (175)
7.9 (200)
26 (57)
FR-A740-02160-NA
FR-HEL-H160K
0.171
335
15.9 (405)
6.9 (175)
8 (205)
28 (62)
FR-A740-02600-NA
FR-HEL-H185K
0.148
389
15.9 (405)
6.9 (175)
9.4 (240)
29 (64)
FR-A740-03250-NA
FR-HEL-H220K
0.124
462
15.9 (405)
6.9 (175)
9.4 (240)
30 (66)
FR-A740-03610-NA
FR-HEL-H250K
0.109
524
17.3 (440)
7.5 (190)
9.8 (250)
35 (77)
FR-A740-04320-NA
FR-HEL-H280K
0.098
585
17.3 (440)
7.5 (190)
10 (255)
38 (84)
FR-A740-04810-NA
FR-HEL-H315K
0.087
658
19.5 (495)
8.3 (210)
9.8 (250)
42 (92)
FR-A740-05470-NA
FR-HEL-H355K
0.077
742
19.5 (495)
8.3 (210)
9.8 (250)
46 (101)
FR-A740-06100-NA
FR-HEL-H400K
0.069
836
19.7 (500)
8.7 (220)
9.8 (250)
50 (110)
FR-A740-06830-NA
FR-HEL-H450K
0.061
940
19.7 (500)
8.7 (220)
10.6 (270)
57 (125)
FR-A740-07700-NA
FR-HEL-H500K
0.055
1045
17.8 (455)
8.5 (215)
13.6 (345)
67 (147)
FR-A740-08660-NA
FR-HEL-H560K
0.049
1170
18.1 (460)
8.5 (215)
14.2 (360)
85 (187)
FR-A740-09620-NA
FR-HEL-H630K
0.044
1317
18.1 (460)
8.5 (215)
14.2 (360)
95 (209)
A700 Frame Size
Frame
Size
Drive Height x Width x Depth
Dimensions inches (mm)
Height
Width
Depth
Weight Without
Reactor
lbs (kg)
A
10.2 (260)
4.3 (110)
4.3 (110)
B
10.2 (260)
4.3 (110)
4.9 (125)
4.2 (1.9)
5 (2.3)
C
10.2 (260)
5.9 (150)
5.5 (140)
9.3 (4.2)
D
10.2 (260)
8.7 (220)
6.7 (170)
17.7 (8)
E
11.8 (300)
8.7 (220)
7.5 (190)
19.4 (8.8)
32.6 (14.8)
F
15.8 (400)
9.8 (250)
7.5 (190)
G
21.7 (550)
12.8 (325)
7.7 (195)
77.1 (35)
H
21.7 (550)
17.1 (435)
9.8 (250)
134.4 (61)
JA
27.6 (700)
18.3 (465)
9.8 (250)
134.4 (61)
J
24.4 (620)
18.3 (465)
11.8 (300)
176.2 (80)
K
29.1 (740)
18.3 (465)
14.2 (360)
244.5 (111)
L
39.8 (1010)
19.6 (498)
15 (380)
378.9 (172)
M
39.8 (1010)
26.8 (680)
15 (380)
385 (175)
N
52.4 (1330)
31.1 (790)
17.3 (440)
572 (260)
P
62.2 (1580)
39.2 (995)
17.3 (440)
814 (370)
Parameter Units / Parameter Copy Units
Parameter units are used for operator control, reading and writing parameters, and
drive monitoring. Parameter Copy Units also read the drive parameter settings and
copy them into non-volatile memory, and can write them into other drives.
Model Number
Description
FR-CB201
FR-CB203
FR-CB205
FR-DU07
Extension cable straight plugs on both ends - 1 meter.
Extension cable straight plugs on both ends - 3 meters.
Extension cable straight plugs on both ends - 5 meters.
Control Panel for A700
LCD Multi-lingual Parameter Copy Unit (English, French, Spanish,
German, Italian, Swedish, Finnish, Japanese) for operator control,
parameter read/write and monitoring. Stores settings in non-volatile
memory. Built-in parameter copy capability. (F/A700 based)
FR-DU07 panel mounting adapter
LCD Multi-lingual Parameter Copy Unit (English, French, Spanish,
German, Italian, Swedish, Finnish, Japanese) for operator control,
parameter read/write and monitoring.
Serial Communication Cable
Battery Powered PU07
Serial Network Hub - 2 Stations
Serial Network Hub - 8 Stations
Terminating Resistor For FR-RJ45-HUB
FR-PU07
FR-ADP
FR-PU04
SC-FRPC
FR-PU07BB-L
FR-RJ45-HUB4
FR-RJ45-HUB10
FR-RJ45-TR
370
Width
Stocked Item
S
S
S
S
S
S
S
S
S
-
A700 Dynamic Braking
All Mitsubishi Electric VFD’s have some inherent braking capability. During controlled deceleration, motor regenerative losses are
dissipated in the motor, wire, and VFD circuitry. The built-in DC injection braking allows for low speed braking and stopping.
When the above capabilities are inadequate for an application, it is necessary to add a power transistor brake unit and resistor unit in
series across the DC bus.
Motor regeneration causes the DC bus voltage to increase, and when the voltage exceeds a specified threshold, the transistor turns on to
pass current through the resistor. Motor kinetic energy is converted to heat energy. VFD overcurrent and overvoltage protective circuits are
active at all times, and will fault-trip the VFD if the brake size is inadequate.
Two main factors must be considered when sizing the brake, the effective duty cycle (%ED) and the short time duty rating. The
effective duty cycle is increased when an external resistor is added. It is preferable to profile the effective duty cycle of the units of time.
With this information, the short time duty is known and the %ED can be calculated, as shown in the below example.
%ED = Braking time / total time for complete operating cycle x 100
Example: Complete cycle is:
5 sec: Acceleration time to reach set speed
60 sec: Run time at set speed
3 sec: Deceleration time to come to a complete stop
12 sec: Time period motor remains stopped
%ED = 3 / (5 + 60 + 3 + 12) x 100 = 3.6%
The tables shown assume 100% brake torque, when brake torque is represented by its percentage to the rated torque of the applied motor.
Torque (kg.m) = 974 x Power (kW) / Speed (rpm).
240VAC Dynamic Braking Resistor at 100% Braking Torque
Resistor Kit Model
Number
Weight kg
(lbs)
Resistance
(Ohms)
Continuous
Permissible
Power (W)
Motor
(Hp)
FR-ABR-0.4K
FR-ABR-0.75K
0.2 (0.5)
0.4 (0.9)
200
100
60
80
1/2
1
FR-ABR-2.2K
0.5 (1.1)
60
120
2&3
FR-ABR-3.7K
FR-ABR-5.5K
FR-ABR-7.5K
FR-ABR-11K
FR-ABR-15K
(2 resistors in parallel)
FR-ABR-22K
(2 resistors in parallel)
0.8 (1.8)
1.3 (2.9)
2.2 (4.9)
3.4 (7.5)
40
25
20
13
155
185
340
560
2.4 (5.3) x 2
9 (18 / 2)
3.3 (6.6) x 2
6.5 (13 / 2)
Drive Model
A720
% ED
Stocked
Item
10%
10%
S
S
10%
S
5
7 1/2
10
15
00030
00050
00080 &
00110
00175
00240
00330
00460
10%
10%
10%
6%
S
S
S
S
805
20
00610
6%
S
1120
25
30
00760
00900
6%
6%
S
480VAC Dynamic Braking Resistor at 100% Braking Torque
Resistor Kit Model
Number
FR-ABR-H0.4K
FR-ABR-H0.75K
FR-ABR-H1.5K
FR-ABR-H2.2K
FR-ABR-H3.7K
FR-ABR-H5.5K
FR-ABR-H7.5K
FR-ABR-H11K
FR-ABR-H15K
(2 resistors in parallel)
FR-ABR-22K
(2 resistors in parallel)
Weight
Resistance
(Ohms)
0.2 (0.5)
0.2 (0.5)
0.4 (0.9)
0.5 (1.1)
0.8 (1.8)
1.3 (2.9)
2.2 (4.9)
3.4 (7.5)
1200
700
350
250
150
110
75
52
Continuous
Permissible
Power
(W)
45
75
115
120
155
185
340
530
2.4 (5.3) x 2
36 (18 x 2)
3.3 (6.6) x 2
26 (52 / 2)
Drive Model
Motor
(Hp)
A740
% ED
Stocked
Item
1/2
1
2
3
5
7 1/2
10
15
00015
00025
00040
00060
00090
00120
00170
00230
10%
10%
10%
10%
10%
10%
10%
6%
S
S
S
S
S
S
S
S
870
20
00310
6%
S
1060
25
30
00380
00440
6%
6%
S
Instruction Manual
Model
Model Number
Stocked Item
FR-ABR(H)
IB(NA)66891
Stocked Item
Model
Model Number
FR-BU2
IB(NA)0600292
-
FR-BU2-C
IB(NA)0600379
-
UFS
NT348E05
-
Mitsubishi Electric Automation
|
Variable Frequency Drives 371
n VARIABLE FREQUENCY DRIVES
Dynamic Braking Options
Select the brake unit according to the motor capacity.
To obtain braking torque greater than 200%, use a larger inverter capacity.
Up to 10 FR-BU2 brake units can be connected in parallel for increased braking capacity.
%ED or Time at Short-Time Rating When Braking Torque is 100%
Stocked
Item
Brake Resistor
Model Number
Stocked
Item
S
BU-1500-TEIKOUKI
-
FR-BU2-3.7K
S
BU-3700-TEIKOUKI
FR-BU2-7.5K
S
BU-7.5K-TEIKOUKI
Brake Unit Model Number
FR-BU2-1.5K
230V
460V
2
-
3
-
5
-
-
-
30 s
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
30 s
30 s
-
-
-
-
-
-
-
-
-
-
-
-
-
FR-BU2-15K
S
FR-BR-15K-UL
S
-
-
-
-
FR-BU2-30K
S
FR-BR-30K-UL
S
-
-
-
-
7.5
-
10
-
15
-
20
-
25
-
80% 40% 15% 10%
-
-
30
-
40
-
FR-BU2-55K
-
FR-BR-55K-UL
-
-
-
-
-
-
-
-
-
S
2 x BU-3700-TEIKOUKI
-
-
-
30 s
30 s
-
-
-
-
FR-BU2-H15K
S
FR-BR-H15K-UL
S
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
FR-BR-H30K-UL
S
-
-
-
-
-
-
FR-BR-H55K-UL
S
-
-
-
-
-
-
FR-BR-C3.7K
-
-
-
-
-
FR-BU2-C22K
S
FR-BR-C7.5K
-
-
-
FR-BR-C22K
-
-
-
-
-
-
2 x FR-BU2-C22K
3 x FR-BU2-C22K
S
S
2 x FR-BR-C22K
3 x FR-BR-C22K
-
-
-
-
-
-
Stocked
Item
Brake Resistor
Model Number
Stocked
Item
100
125
150
200
250
300
350
400
450
500
FR-BU2-H75K
S
MT-BR5-H75K
-
10%
5%
-
-
-
-
-
-
-
-
2 x FR-BU2-H75K
3 x FR-BU2-H75K
4 x FR-BU2-H75K
5 x FR-BU2-H75K
6 x FR-BU2-H75K
7 x FR-BU2-H75K
8 x FR-BU2-H75K
S
S
S
S
S
S
S
2 x MT-BR5-H75K
3 x MT-BR5-H75K
4 x MT-BR5-H75K
5 x MT-BR5-H75K
6 x MT-BR5-H75K
7 x MT-BR5-H75K
8 x MT-BR5-H75K
-
40%
90%
-
25%
60%
95%
-
15%
40%
70%
-
10%
20%
40%
60%
90%
-
5%
14%
25%
40%
55%
80%
-
10%
15%
25%
40%
55%
70%
5%
13%
20%
25%
40%
50%
5%
10%
15%
25%
35%
45%
5%
12%
15%
20%
30%
Brake Unit Model Number
-
-
S
65% 30% 25% 15% 10%
-
90% 60% 30% 20% 15% 10%
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
85% 40% 20% 15% 10%
-
-
-
S
40% 20% 10%
-
-
FR-BU2-H30K
-
75
-
-
FR-BU2-H55K
-
60
-
90% 60% 30% 20% 15% 10%
80% 40% 15% 10%
30% 10%
50
-
65% 30% 25% 15% 10%
FR-BU2-H7.5K
600V
460V
Motor Capacity (HP)
1
30 s
-
-
-
-
-
-
-
-
15%
-
-
15%
600
700
800
-
-
-
5%
10%
14%
15%
25%
5%
10%
13%
15%
5%
5%
10%
13%
5%
5%
10%
40
-
50
-
60
-
75
-
-
-
-
-
-
Motor Capacity (HP)
Braking Torque (%) at Short-Time Rating of 30 Sec. for 5HP and Less
Braking Torque (%) at Short-Time Rating of 15 Sec. for 7.5HP and Larger
Brake Unit Model Number
230V
460V
Stocked
Item
Brake Resistor
Model Number
Stocked
Item
S
S
S
BU-1500-TEIKOUKI
BU-3700-TEIKOUKI
BU-7.5K-TEIKOUKI
-
FR-BU2-1.5K
FR-BU2-3.7K
FR-BU2-7.5K
Motor Capacity (HP)
1
2
3
5
100% 50%
100% 50% 50%
100% 100%
FR-BU2-15K
S
FR-BR-15K-UL
S
-
-
FR-BU2-30K
FR-BU2-55K
FR-BU2-H15K
FR-BU2-H30K
FR-BU2-H55K
S
S
S
S
FR-BU2-C22K
S
2 x FR-BU2-C22K
3 x FR-BU2-C22K
S
S
FR-BR-30K-UL
FR-BR-55K-UL
FR-BR-H15K-UL
FR-BR-H30K-UL
FR-BR-H55K-UL
FR-BR-C3.7K
FR-BR-C7.5K
FR-BR-C22K
2 x FR-BR-C22K
3 x FR-BR-C22K
S
S
S
S
-
-
-
600V
-
-
7.5
-
10
-
15
-
20
-
280% 200% 120% 100%
280% 200%
170% 100%
340% 200% 130% 100%
300%
-
260%
120%
260%
200%
-
180%
100%
180%
145%
-
25
-
30
-
80%
70%
160%
300%
80%
160%
300%
120%
-
130%
250%
70%
130%
250%
100%
-
100% 80% 70%
180% 150% 120% 100%
100% 80% 70%
180% 150% 120% 100%
120%
120%
Note: FR-BU2-C22K is not UL or cUL listed for use with the FR-BR-C resistor. If UL or cUL is required, use the ASC-RES-C22K in place of FR-BR-C22K.
Brake Unit Model Number
460V
372
FR-BU2-H75K
2 x FR-BU2-H75K
3 x FR-BU2-H75K
4 x FR-BU2-H75K
5 x FR-BU2-H75K
6 x FR-BU2-H75K
7 x FR-BU2-H75K
8 x FR-BU2-H75K
Stocked
Item
Brake Resistor Model
Number
Stocked
Item
S
-
MT-BR5-H75K
2 x MT-BR5-H75K
3 x MT-BR5-H75K
4 x MT-BR5-H75K
5 x MT-BR5-H75K
6 x MT-BR5-H75K
7 x MT-BR5-H75K
8 x MT-BR5-H75K
-
Motor Capacity (HP)
100
125
150
200
250
300
350
400
100% 80% 65% 50% 40% 30% 28% 26%
200% 165% 135% 100% 80% 65% 55% 53%
300% 250% 200% 150% 120% 100% 85% 80%
300% 270% 200% 160% 135% 115% 105%
300% 250% 200% 170% 140% 130%
300% 240% 200% 170% 160%
280% 235% 200% 185%
270% 230% 210%
450
22%
44%
65%
85%
110%
130%
155%
175%
500
600
700
800
20%
40% 33% 28% 25%
60% 50% 43% 37%
80% 65% 55% 50%
100% 83% 70% 62%
120% 100% 85% 75%
140% 115% 100% 85%
160% 130% 110% 100%
Dynamic Braking Unit & Resistor Specifications
Brake Unit Model Number
230V
460V
FR-BU2-1.5K
FR-BU2-3.7K
FR-BU2-7.5K
FR-BU2-15K
FR-BU2-30K
FR-BU2-55K
FR-BU2-H7.5K
FR-BU2-H15K
FR-BU2-H30K
FR-BU2-H55K
FR-BU2-H75K
Stocked Item
Brake Resistor Model Number
Stocked Item
Weight
kg / lbs
Resistance
(Ohms)
Rated (Watts)
S
S
S
S
S
S
S
S
S
S
BU-1500-TEIKOUKI
BU-3700-TEIKOUKI
BU-7.5K-TEIKOUKI
FR-BR-15K-UL
FR-BR-30K-UL
FR-BR-55K-UL
2 x BU-3700-TEIKOUKI
FR-BR-H15K-UL
FR-BR-H30K-UL
FR-BR-H55K-UL
MT-BR5-H75K
S
S
S
S
S
-
n/a
n/a
n/a
15 / 33
30 / 66
70 / 154
n/a
15 / 33
30 / 66
70 / 154
70 / 154
50
30
20
8
4
2
60
32
16
8
6.5
300
900
1800
4000
8000
16000
1800
4000
8000
16000
30000
Continuous
Permissible
Power (Watts)
100
300
600
990
1990
3910
600
990
1990
3910
7500
A700 Dynamic Braking Units and Resistors - UFS Series
• A more economical solution to regenerative braking applications.
• UL and cUL listing for the brake units
• Internal Form-C relay
• Adjustable DC bus brake turn-on voltage
• Configurable master / slave brake configuration. Allows connection of up to 5 brake units (1 master / 4 slaves)
240V Series
Braking
Torque
100% for
15 secs.
Electrical
Data
Hp
kW
Brake Unit
Brake Resistor
Continuous Permissible Power (W)
Resistance (Overall)
Continuous Current (Amps)
7.5
5.5
10
7.5
15
11
UFS22J
Motor Capacity
25
30
18.5
22
20
15
RUFC15J
RUFC22J
UFS22J - 1500W
RUFC15J - 24ohms
RUFC22J - 12ohms
7A
10A
40
30
50
37
60
75
45
55
2 x UFS40J
2 x RUFC40J
2ea x UFS40J - 4000W
2ea x RUFC40J - 3.75ohms
29.2A
UFS40J
RUFC40J
UFS40J - 2000W
RUFC40J - 7.5ohms
14.6A
460V Series
Braking
Torque
100% for
15 secs.
Electrical
Data
Braking
Torque
100% for
15 secs.
Electrical
Data
Hp
kW
Brake Unit
Brake Resistor
Continuous Permissible Power (W)
Resistance (Overall)
Continuous Current (Amps)
7.5
5.5
10
7.5
15
11
25
18.5
Motor Capacity
30
22
40
30
50
37
UFS22
RUFC15/480
RUFC22/480
UFS22 - 2000W
RUFC22/480 - 27ohms
7.7A
RUFC15/480 - 44ohms
6A
Hp
kW
Brake Unit
Brake Resistor
Continuous Permissible Power (W)
Resistance (Overall)
Continuous Current (Amps)
100
75
125
90
150
110
Motor Capacity
175
132
215
160
UFS110
RUFC110/480
UFS110 - 8000W
RUFC110/480 - 6.8ohms
30.7A
60
75
45
55
UFS40
RUFC40/480
UFS40 - 4000W
RUFC40/480 - 15ohms
14.6A
300
375
220
280
2 X UFS110
2 X RUFC110/480
2 x UFS110 - 16000W
2 x RUFC110/480 - 3.4ohms
61.4A
Dimensions
Height
Model Number
240V
480V
UFS20J
UFS40J
RUFC15J
RUFC22J
RUFC40J
UFS22
UFS40
UFS110
RUFC15/480
RUFC22/480
RUFC40/480
RUFC110/480
Width
mm
inches
250
9.8
240
310
365
9.5
12.2
14.4
250
9.8
310
365
2 x 365
4 x 365
12.2
14.4
2 x 14.4
4 x 14.4
mm
100
Depth
inches
Approximate Weight
mm
inches
kg
lbs
175
6.9
2.5
5.5
75
3
2.8
3.5
4.3
6.2
7.7
9.5
3.9
100
3.9
175
6.9
2.5
5.5
107
4.2
195
7.7
100
3.9
75
3
2 x 100
4 x 100
2 x 3.9
4 x 3.9
2 x 75
4 x 75
2x3
4x3
3.9
3.5
4.2
8.7
17.3
8.6
7.7
9.3
19.2
38.1
Mitsubishi Electric Automation
|
Stocked
Item
S
S
S
S
S
S
S
S
S
S
S
S
Variable Frequency Drives 373
n VARIABLE FREQUENCY DRIVES
A700 VFD Efficiency Values • ND Rating Based
240VAC 3-Phase Input
Model Number
Rated
Watts
Watts
Loss
480VAC 3-Phase Input
Efficiency
Model Number
Rated
Watts
Watts
Loss
600VAC 3-Phase Input
Efficiency
Factory
Supplied
DC Choke
Watts
Loss
Model Number
Rated
Watts
Watts
Loss
Efficiency
Factory
Supplied
DC Choke
Watts
Loss
FR-A720-00030-NA
400
50
88%
FR-A740-00015-NA
400
50
88%
-
FR-A760-00017-NA
750
40
95%
-
FR-A720-00050-NA
750
70
91%
FR-A740-00025-NA
750
65
91%
-
FR-A760-00040-NA
2200
70
97%
-
FR-A720-00080-NA
1500
110
93%
FR-A740-00040-NA
1500
75
95%
-
FR-A760-00061-NA
3700
110
97%
-
FR-A720-00110-NA
2200
140
94%
FR-A740-00060-NA
2200
100
95%
-
FR-A760-00120-NA
7500
160
98%
-
FR-A720-00175-NA
3700
190
95%
FR-A740-00090-NA
3700
150
96%
-
FR-A760-00220-NA
15000
260
98%
-
FR-A720-00240-NA
5500
260
95%
FR-A740-00120-NA
5500
200
96%
-
FR-A760-00330-NA
22000
410
98%
-
FR-A720-00330-NA
7500
360
95%
FR-A740-00170-NA
7500
250
97%
-
FR-A760-00550-NA
37000
650
98%
-
FR-A720-00460-NA
11000
520
95%
FR-A740-00230-NA
11000
300
97%
-
FR-A760-00840-NA
55000
940
98%
-
FR-A720-00610-NA
15000
670
96%
FR-A740-00310-NA
15000
400
97%
-
FR-A760-01040-NA
75000
1500
98%
100
FR-A720-00760-NA
18500
770
96%
FR-A740-00380-NA
18500
550
97%
-
FR-A760-01310-NA
90000
1800
98%
120
FR-A720-00900-NA
22000
940
96%
FR-A740-00440-NA
22000
650
97%
-
FR-A760-01520-NA
111000
2200
98%
140
FR-A720-01150-NA
30000
1050
97%
FR-A740-00570-NA
30000
800
97%
-
FR-A760-02210-NA
132000
2600
98%
180
FR-A720-01450-NA
37000
1270
97%
FR-A740-00710-NA
37000
1100
97%
-
FR-A760-02550-NA
185000
3200
98%
200
FR-A720-01750-NA
45000
1610
96%
FR-A740-00860-NA
45000
1300
97%
-
FR-A760-03040-NA
220000
3700
98%
230
FR-A720-02150-NA
55000
1880
97%
FR-A740-01100-NA
55000
1550
97%
-
FR-A760-04020-NA
280000
4800
98%
310
FR-A720-02880-NA
75000
2530
97%
FR-A740-01440-NA
75000
1900
97%
130
FR-A760-04960-NA
355000
6000
98%
340
FR-A720-03460-NA
90000
3110
97%
FR-A740-01800-NA
90000
2400
97%
130
FR-A760-06630-NA
400000
7500
98%
390
-
-
-
-
FR-A740-02160-NA
110000
2500
98%
140
-
-
-
-
-
-
-
-
-
FR-A740-02600-NA
132000
3000
98%
140
-
-
-
-
-
-
-
-
-
FR-A740-03250-NA
160000
4000
98%
170
-
-
-
-
-
-
-
-
-
FR-A740-03160-NA
185000
4200
98%
230
-
-
-
-
-
-
-
-
-
FR-A740-04320-NA
220000
5000
98%
240
-
-
-
-
-
-
-
-
-
FR-A740-04810-NA
250000
5500
98%
270
-
-
-
-
-
-
-
-
-
FR-A740-05470-NA
280000
6500
98%
300
-
-
-
-
-
-
-
-
-
FR-A740-06100-NA
315000
7000
98%
360
-
-
-
-
-
-
-
-
-
FR-A740-06830-NA
355000
8000
98%
360
-
-
-
-
-
-
-
-
-
FR-A740-07700-NA
400000
9000
98%
450
-
-
-
-
-
-
-
-
-
FR-A740-08660-NA
450000 10500
98%
450
-
-
-
-
-
-
-
-
-
FR-A740-09620-NA
500000 11500
98%
470
-
-
-
-
-
General Notes:
1. The amount of heat generated by the inverter is based on one inverter connected to one motor of the same capacity.
2. The amount of heat generated in the above table is the amount of heat generated when the inverter is operated at it’s rated current.
3. The amount of heat generated will decrease according to the motor load and usage (duty).
4. When using the external heat sink attachment watt loss decreases by 60%.
374
A701 Series
Vector VFD with built-in Line Regeneration.
• Ideal for applications with continuous
overhauling or large inertia loads
• Capacity up to 75HP for 240V and 480V
applications
• Braking Torque
• 100% continuous
• 150% for up to 60 sec.
• Vector mode with encoder allows Speed,
Torque and Position control
• Real Sensorless mode allows Speed and
Torque control without encoder
• Starting torque of 150% at 0.3Hz
• 2 serial ports (RS485) and 1 USB port
• 3 option ports for plug-in network or
function expansion options
• 12 programmable digital inputs
(sink/source selectable)
• 5 programmable digital outputs
(sink/source selectable)
• 2 form C relays
• 3 analog inputs
• Terminal 2 (0~5VDC, 0~10VDC,
0~20mA selectable)
• Terminal 1 (0 to +/-5VDC or
0 to ±10VDC selectable)
• Terminal 4 (0~5VDC, 0~10VDC,
4~20mA selectable)
• 2 analog outputs (0~10VDC and
pulse train out)
• Modbus RTU and Mitsubishi VFD
serial protocol communications
• UL and cUL listed. CE marked
(480V version only)
FR-A721 – 5.5K
Symbol
A721
A741
Voltage
Voltage Class
Three phase 240V class
Three phase 480V class
Inverter capacity
in kilowatts
5.5K = 5.5KW
0.746kW = 1HP
240V
7.5 – 75 Hp
480V
7.5 – 75 Hp
Horsepower
A701 Ratings
Note: There is no PLC function as included in the standard A700
Rating (CT & VT)
Dimensions in inches (mm)
HP
Rated Amps
IP00 Open Chassis
Model Number
7 1/2
24
FR-A721-5.5K
18.5 (470)
9.9 (250)
10
33
FR-A721-7.5K
18.5 (470)
9.9 (250)
15
46
FR-A721-11K
21.6 (540)
20
61
FR-A721-15K
25
76
30
Weight Lbs (kg)
Stocked Item
10.7 (270)
44.1 (20)
-
10.7 (270)
48.5 (22)
-
11.9 (300)
11.6 (294)
72.7 (33)
-
21.6 (540)
11.9 (300)
11.6 (294)
77.1 (35)
-
FR-A721-18.5K
23.7 (600)
15.4 (390)
12.6 (320)
110.2 (50)
-
90
FR-A721-22K
23.7 (600)
15.4 (390)
12.6 (320)
114.6 (52)
-
40
115
FR-A721-30K
27.6 (700)
17.8 (450)
13.4 (340)
152.0 (69)
-
50
145
FR-A721-37K
27.6 (700)
18.5 (470)
14.5 (368)
191.7 (87)
-
60
175
FR-A721-45K
27.6 (700)
18.5 (470)
14.5 (368)
198.3 (90)
-
75
215
FR-A721-55K
35.5 (900)
23.7 (600)
16.0 (405)
264.4 (120)
-
Height
Width
Depth
3-Phase 200~240VAC Input & Output
3-Phase 380~480VAC Input & Output
7 1/2
12
FR-A741-5.5K
18.5 (470)
9.9 (250)
10.7 (270)
55.1 (25)
-
10
17
FR-A741-7.5K
18.5 (470)
9.9 (250)
10.7 (270)
57.3 (26)
-
15
23
FR-A741-11K
21.6 (540)
11.9 (300)
11.6 (294)
81.5 (37)
-
20
31
FR-A741-15K
21.6 (540)
11.9 (300)
11.6 (294)
88.1 (40)
-
25
38
FR-A741-18.5K
23.7 (600)
14.2 (360)
12.6 (320)
105.8 (48)
-
30
44
FR-A741-22K
23.7 (600)
14.2 (360)
12.6 (320)
108.0 (49)
-
40
57
FR-A741-30K
27.6 (700)
17.8 (450)
13.4 (340)
143.2 (65)
-
50
71
FR-A741-37K
27.6 (700)
18.5 (470)
14.5 (368)
176.3 (80)
-
60
86
FR-A741-45K
27.6 (700)
18.5 (470)
14.5 (368)
182.9 (83)
-
75
110
FR-A741-55K
35.5 (900)
23.7 (600)
16.0 (405)
253.3 (115)
-
Mitsubishi Electric Automation
|
Variable Frequency Drives 375
Control Method
Output Frequency Range
Frequency
Setting
Resolution
Analog Input
Digital Input
Analog Input
Digital Input
Voltage / Frequency
Characteristics
Starting Torque
Torque Boost
Acceleration / Deceleration
Time Setting
DC Injection Brake
Stall Prevention Operation
Level
Torque Limit Level
Frequency
Analog Input
Setting
Digital Input
Signal
Start Signal
Operation Specifications
Frequency
Accuracy
Input Signal
Pulse Train Input
Operational Functions
Operating
Status
Output
Signals
When used
with the
FR-A7AY,
FR-A7AR
(optional)
Pulse Train Input
Indication
Pulse / Analog Output
PU (FRDU07 /
FR-PU07 /
FR-PU04)
Operating
Status
Fault
Definition
Interactive
Guidance
Protective / Warning Function
Environment
n VARIABLE FREQUENCY DRIVES
A701 General Specifications
Ambient Temperature
Ambient Humidity
Storage Temperature (*4)
Atmosphere
Altitude / Vibration
Soft-PWM control/high carrier frequency PWM control (selectable from among V/F control, advanced magnetic flux vector control and
real sensorless vector control) / vector control (*1)
0.2 to 400Hz (The maximum frequency is 120Hz under real sensorless vector control and vector control.) (*1)
0.015Hz/0 to 60Hz (terminal 2, 4: 0 to 10V/12bit); 0.03Hz/0 to 60Hz (terminal 2, 4: 0 to 5V/11bit, 0 to 20mA/about 11bit, terminal 1: 0 to ±10V/12bit)
0.06Hz/0 to 60Hz (terminal 1: 0 to ±5V/11bit)
0.01Hz
Within ±0.2% of the max. output frequency (25°C ±10°C)
Within 0.01% of the set output frequency
Base frequency can be set from 0 to 400Hz Constant torque/variable torque pattern or adjustable 5 points V/F can be selected
150% 0.3Hz (under real sensorless vector control or vector control) (*1)
Manual torque boost
0 to 3600s (acceleration and deceleration can be set individually), linear or S-pattern acceleration/deceleration mode, backlash
measures acceleration/deceleration can be selected.
Operation frequency (0 to 120Hz), operation time (0 to 10s), operation voltage (0 to 30%) variable
Operation current level can be set (0 to 220% adjustable), whether to use the function or not can be selected
Torque limit value can be set (0 to 400% variable)
Terminal 2, 4: 0 to 10V, 0 to 5V, 4 to 20mA (0 to 20mA) can be selected • Terminal 1: -10 to +10V, -5 to +5V can be selected
Input using the setting dial of the operation panel or parameter unit; Four-digit BCD or 16 bit binary (when used with option FR-A7AX)
Forward and reverse rotation or start signal automatic self-holding input (3-wire input) can be selected.
You can select any twelve signals using Pr. 178 to Pr. 189 (input terminal function selection) from among multi speed selection, remote setting, stop-on-contact, second function selection, third function selection, terminal 4 input selection, JOG operation selection, selection of automatic restart after instantaneous
power failure, flying start, external thermal relay input, PU operation/external inter lock signal , external DC injection brake operation start, PID control enable
terminal, brake opening completion signal, PU operation/external operation switchover, load pattern selection forward rotation reverse rotation boost, V/F
switching, load torque high-speed frequency, S-pattern acceleration/deceleration C switchover, pre-excitation, output stop, start self-holding selection, control
mode changing, torque limit selection, start-time tuning start external input, torque bias selection 1, 2 (*1), P/PI control switchover, forward rotation command,
reverse rotation command, inverter reset, PTC thermistor input, PID forward reverse operation switchover, PU-NET operation switchover, NET-external operation switchover, and command source switchover, conditional position pulse train sign (*1), conditional position droop pulse clear (*1), magnetic flux decay
output shutoff.
100kpps
Maximum/minimum frequency setting, frequency jump operation, external thermal relay input selection, polarity reversible operation, automatic
restart after instantaneous power failure operation, electronic bypass operation, forward/reverse rotation prevention, remote setting, brake sequence,
second function, third function, multi-speed operation, original operation continuation at instantaneous power failure, stop-on-contact control, load
torque high speed frequency control, droop control, regeneration avoidance, slip compensation, operation mode selection, offline auto tuning function, online auto tuning function, PID control, computer link operation (RS-485), motor end orientation (*1), pre-excitation, notch filter, easy gain
tuning, speed feed forward, and torque bias (*1)
You can select any signals using Pr. 190 to Pr. 196 (output terminal function selection) from among inverter running, up-to-frequency, instantaneous
power failure/undervoltage, overload warning, output frequency (speed) detection, second output frequency (speed) detection, third output frequency
(speed) detection, electronic thermal relay function pre-alarm, PU operation mode, inverter operation ready, output current detection, zero current
detection, PID lower limit, PID upper limit, PID forward rotation reverse rotation output, electronic bypass MC1, electronic bypass MC2, electronic
bypass MC3, orientation complete (*1), brake opening request, fan fault output, heatsink overheat pre-alarm , inverter running/start command on,
deceleration at an instantaneous power failure, PID control activated, during retry, PID output interruption, life alarm, fault output 1, 2, 3 (power-off
signal), power savings average value update timing, current average monitor, maintenance timer alarm, remote output, forward rotation output (*1),
reverse rotation output (*1), low speed output, torque detection, regenerative status output (*1), start-time tuning completion, in-position completion
(*1), alarm output and fault output. Open collector output (5 points), relay output (2 points) and alarm code of the inverter can be output (4 bit) from
the open collector.
In addition to the above, you can select any signals using Pr. 313 to Pr. 319 (extension output terminal function selection) from among control circuit
capacitor life, main circuit capacitor life, cooling fan life, inrush current limit circuit life. (only positive logic can be set for extension terminals of the
FR-A7AR)
500kpps
Select any signals using Pr. 54 FM terminal function selection (pulse train output) and Pr. 158 AM terminal function selection (analog output) from
among output frequency, motor current (steady or peak value), output voltage, frequency setting, operation speed, motor torque, converter output
voltage (steady or peak value), electronic thermal relay function load factor, input power, output power, load meter, motor excitation current, reference voltage output, motor load factor, power saving effect, PID set point, PID measured value, motor output, torque command, torque current command, and torque monitor.
Output frequency, motor current (steady or peak value), output voltage, frequency setting, running speed, motor torque, overload, converter output
voltage (steady or peak value), electronic thermal relay function load factor, input power, output power, load meter, motor excitation current, cumulative energization time, actual operation time, motor load factor, cumulative power, energy saving effect, cumulative saving power, PID set point, PID
measured value, PID deviation, inverter I/O terminal monitor, input terminal option monitor (*2), output terminal option monitor (*2), option fitting
status (*3), terminal assignment status (*3), torque command, torque current command, feed back pulse (*1),motor output
Fault definition is displayed during the fault occurs, the output voltage/current/frequency/cumulative energization time right before the
fault occurs and past 8 fault definitions are stored.
Operation guide/trouble shooting with a help function (*3)
Overcurrent during acceleration, overcurrent during constant speed, overcurrent during deceleration, overvoltage during acceleration, overvoltage
during constant speed, overvoltage during deceleration, inverter protection thermal operation, motor protection thermal operation, heatsink overheat,
instantaneous power failure occurrence, undervoltage, input phase failure, motor overload, output side earth (ground) fault overcurrent, output short
circuit, main circuit element overheat, output phase failure, external thermal relay operation (*5), PTC thermistor operation (*5), option alarm, parameter error, PU disconnection, retry count excess (*5), CPU alarm, operation panel power supply short circuit, 24VDC power output short circuit,
output current detection value excess (*5), inrush current limit circuit alarm, communication alarm (inverter), opposite rotation deceleration error*5,
analog input error, fan fault, overcurrent stall prevention, overvoltage stall prevention, electronic thermal relay function prealarm, PU stop, maintenance timer alarm (*2) (*5), parameter write error, copy operation error, operation panel lock, parameter copy alarm, speed limit indication, signal
loss detection (*1) (*5), speed deviation large (*1) (*5), overspeed (*1) (*5), excessive position error (*1) (*5), brake sequence error (*5), encoder
phase error (*1) (*5), regeneration converter overcurrent, regeneration converter circuit fault, regeneration converter transistor protection thermal
-10°C to +50°C (non-freezing)
90%RH maximum (non-condensing)
-20°C to +65°C
Indoors (without corrosive gas, flammable gas, oil mist, dust and dirt etc.)
Maximum 1000m above sea level, 5.9m/s2 or less
Notes:
1. Available only when the option (FR-A7AP) is mounted
2. Can be displayed only on the operation panel (FR-DU07).
3. Can be displayed only on the parameter unit (FR-PU07/FR-PU04).
4. Temperature applicable for a short period in transit, etc.
5. This protective function does not function in the initial status.
376
A701 Terminal Connection Diagram
Sink logic
Main circuit terminal
P/+
MC
MCCB
R/L1
S/L2
T/L3
Three-phase AC
power supply
*1
Earth
(Ground)
STR
RT
SU
MRS
IPF
CS PTC
SD
2
1
4
Connector
for plug-in option
connection
USB
connector
RM RH
A2
RT
B2
FU
(+) Analog signal output
(0 to 10VDC)
(-)
RS-485 terminals
TXD+
Data transmission
TXDRXD+
Data reception
RXDSG
GND
Terminating
resistor VCC
C2 10E 10
SD
- Indicator
(Frequency meter, etc.)
Moving-coil type
1mA full-scale
Calibration
resistor *7
5
AU STOP MRS RES SD
SE RUN SU IPF OL
+
FM
SD
Option connector 2
C1
using Pr.291.
*9. Because the FR Configurator has not
worked with the FR-A701 series, a USB
connector can not be used.
AM
4 to 20mADC (Initial value)
0 to 5VDC selected *4
0 to 10VDC
Option connector 3
*7. It is not necessary when *8. FM terminal can be
used for pulse train
calibrating the indicator
output of open
from the operation panel.
collector output
*8
*9
Option connector 1
*5. It is recommended to use 2W1kΩ
when the frequency setting signal
is changed frequently.
Open collector output common
Sink/source common
PU
connector
0 to ±10VDC (Initial value)
1
0 to ±5VDC selected *4
Auxiliary (+)
input (-)
Terminal
4 input (+)
(Current (-)
input)
Frequency detection
24V
input switch
4 2
10E(+10V)
ON
OFF
10(+5V)
0 to 5VDC (Initial value)
2 0 to 10VDC selected
*4
0 to 20mADC
5
(Analog common)
3
Overload
SE
*4 Voltage/current
Frequency setting signal (Analog)
Terminal functions
Up to frequency vary with the output
terminal assignment
Instantaneous (Pr. 190 to Pr. 194)
power failure
FU
PC
24VDC power supply
(Common for external power supply transistor)
Running
OL
AU
AU
Open collector output
RUN
RES *3
Reset
Relay output 2
A2
JOG *2
Jog mode
RL
Terminal functions
Relay output 1 vary with the output
(Fault output) terminal assignment
(Pr. 195, Pr. 196)
B2
RL
Low speed
B1
B1
C2
RH
RM
A1
Relay output
A1
Middle
speed
A701 Control Terminal Layout
C1
STOP
Terminal 4 input selection
(Current input selection)
Selection of automatic restart
after instantaneous
power failure
Contact input common
*4. Terminal input specifications
can be changed by analog
input specifications
switchover (Pr. 73, Pr. 267).
Set the voltage/current input
switch in the OFF position to
select voltage input (0 to 5V/0
to10V) and ON to select
current input (4 to 20mA).
*6. Do not connect any options to P/+ and
N/-.
STF
Output stop
Frequency setting
potentiometer
1/2W1kΩ
*5
Motor
IM
Control circuit
Second function selection
*3. AU terminal can be
used as PTC input
terminal.
U
V
W
Earth (Ground)
SOURCE
*2. JOG terminal can be used
as pulse train input terminal.
Use Pr. 291 to select
JOG/pulse.
Inrush current
limit circuit
Main circuit
Control input signals (No voltage input allowed)
Forward
Terminal functions vary with
rotation
the input terminal
start
assignment (Pr. 178 to Pr. 189) Reverse
rotation
start
Start selfholding selection
High speed
Multi-speed
selection
*6
R1/L11
S1/L21
Jumper
*1. To supply power to the
control circuit separately,
remove the jumper across
R1/L11 and S1/L21.
N/-
*6
SINK
Control circuit terminal
2
5V (Permissible load
current 100mA)
5
4
FM AM
SD STF STR JOG CS
1
PC
Mitsubishi Electric Automation
|
Variable Frequency Drives 377
Instruction Manuals
Stocked
Item
Function
Model No.
120VAC Control Input
FR-A7AC
S
Analog I/O
FR-A7AN
S
Encoder Feedback
FR-A7AP
S
Encoder Pulse Dividing Output
FR-A7AL
S
Relay Output
FR-A7AR
S
12 Bit Digital Input
FR-A7AX
S
FR-A7AY
S
FR-A7AZ
-
FR-A7NC
S
Digital Output
Ext. Analog Output
BiPolar Analog Input
High Res Analog Input
Motor Thermistor
CC-Link
ControlNET (*1)
FR-A7NCN
S
DeviceNet
FR-A7ND
S
EtherNET IP (*1)
FR-A7NE
S
LonWorks
FR-A7NL
S
Profibus DP
FR-A7NP
S
SSCNET III
FR-A7NS
S
A701 series supports only the above listed plug-in options.
Those options not listed cannot be used with the A701 series.
Parameter Units / Parameter Copy Units
Parameter units are used for operator control, reading and writing
parameters, and drive monitoring. Parameter Copy Units also read the
drive parameter settings and copy them into non-volatile memory, and
can write them into other drives.
Model Number
Stocked
Item
S
Description
FR-CB201
Extension cable straight plugs on both ends - 1 meter.
FR-CB203
FR-CB205
FR-DU07
Extension cable straight plugs on both ends - 3 meters.
Extension cable straight plugs on both ends - 5 meters.
Control Panel for F700
LCD Multi-lingual Parameter Copy Unit (English,
French, Spanish, German, Italian, Swedish, Finnish,
Japanese) for operator control, parameter read/write and
monitoring. Stores settings in non-volatile memory. Builtin parameter copy capability. (F/A700 based)
FR-DU07 panel mounting adapter
LCD Multi-lingual Parameter Copy Unit (English, French,
Spanish, German, Italian, Swedish, Finnish, Japanese) for
operator control, parameter read/write and monitoring.
Serial Communication Cable
Battery Powered PU07
Serial Network Hub - 2 Stations
Serial Network Hub - 8 Stations
Terminating Resistor for FR-RJ45-HUB
FR-PU07
FR-ADP
FR-PU04
SC-FRPC
FR-PU07BB-L
FR-RJ45-HUB4
FR-RJ45-HUB10
FR-RJ45-TR
S
S
S
S
S
S
S
S
-
Software
Model Number
Description
FR-CONFIGURATOR
Programming and diagnostic software
(ver. 3.20 or greater)
378
Stocked Item
S
Description
Model Number
FR-A701 Applied Manual - Contains wiring details, VFD layout
drawings, alarm definitions and complete parameter list with
definitions and setting examples
IB(NA)0600337
FR-A701 Basic Manual - Contains wiring details, VFD layout
drawings, alarm definitions and parameter list
IB(NA)0600331
FR-PU07 - Contains complete instruction sets and screen
definitions
IB(NA)0600240
Manuals available for download at www.meau.com
Building Management Options
Network Type / Model
BACnet/IP
Ethernet/IP
Modbus/TCP
Profinet IO
BACnet MS/TP
Metasys N2
Siemens FLN
Stocked Item
Gateway
Communication
Function/Options
Communication
n VARIABLE FREQUENCY DRIVES
A701 Options
FR-A7N-ETH FR-A7N-XLT
(*2,*3,*4)
(*2,*3,*4)
X
X
X
X
X
X
X
S
S
ETH-1000
(*5,*6)
X
X
X
X
X
X
-
Notes:
1. For additional information, visit www.iccdesigns.com
2. Physically mounts within VFD and powered by VFD
3. Deep control cover is required
4. FR-E7TR option recommended. (PU connector not available for use)
5. Communication to multiple VFD’s is possible
6. Mounted and powered external to VFD
XLTR-1000
(*5,*6)
X
X
-
V500 Series
Variable Frequency Drives True, Closed Loop Vector Control
This series achieves high precision and fast response that exceeds the performance of conventional
general-purpose inverters. They can be used in specialized applications such as line control and elevators.
• 4-Quadrant torque control standard
• Multiple parameters for tailoring to a wide variety
of applications
• Simple positioning included as standard
• DC Link Reactor standard (V500L)
• Peripheral devices such as power regenerative
converter (FR-CV, FR-RC, MT-RC) available
• Communications options: DeviceNet, Profibus DP,
CC-Link, Modbus Plus, SSCNet
By incorporating our original all-digital vector control,
high starting torque and high speed response have
been made possible for both velocity and torque control
modes.
•
•
•
•
2 to 75 Horsepower at 240V
2 to 75 Horsepower at 480V
100% continuous torque at Zero speed
Auto Tuning to other manufacturer’s constant torque
motor with encoder
• Easy to use Parameter Unit
Constant Torque
Hp
Model Number
Output Amps
Constant Torque
Stocked Item
Hp
Model Number
Output Amps
3-Phase 240VAC Input / Output
Stocked Item
3-Phase 480VAC Input / Output
2
9.0
FR-V520-1.5K-NA
S
2
4.5
FR-V540-1.5K-NA
S
3
13.0
FR-V520-2.2K-NA
S
3
6.5
FR-V540-2.2K-NA
S
5
20.0
FR-V520-3.7K-NA
S
5
10.0
FR-V540-3.7K-NA
S
7.5
28.5
FR-V520-5.5K-NA
-
7.5
14.5
FR-V540-5.5K-NA
-
10
37.5
FR-V520-7.5K-NA
-
10
18.5
FR-V540-7.5K-NA
-
15
54
FR-V520-11K-NA
-
15
27.5
FR-V540-11K-NA
S
20
72.8
FR-V520-15K-NA
-
20
35.5
FR-V540-15K-NA
S
25
88
FR-V520-18.5K-NA
-
25
44.0
FR-V540-18.5K-NA
-
30
103.5
FR-V520-22K-NA
S
30
51.8
FR-V540-22K-NA
-
40
126.5
FR-V520-30K-NA
-
40
67.0
FR-V540-30K-NA
-
50
166.8
FR-V520-37K-NA
-
50
86.0
FR-V540-37K-NA
S
60
198.0
FR-V520-45K-NA
-
60
99.0
FR-V540-45K-NA
S
75
264.0
FR-V520-55K-NA
-
75
132.0
FR-V540-55K-NA
-
V500 Ratings 240V Class 1.5K - 55K
Model FR-V520-_ _K-NA
1.5
Horsepower Rating (Hp)
Rated Current (A)
2.2
3.7
5.5
18.5
30
37
45
55
3
5
7.5
10
15
20
25
30
40
50
60
75
20.0
28.5
37.5
54.0
72.8
88.0
103.5
126.5
166.0
198.0
264.0
150% 60 sec., 200% 0.5 sec. (inverse time characteristics)
3-Phase 200-220V 50 Hz, 200-240V 60 Hz
Max. Time
Tolerable
Work Rate
22
13.0
3-Phase 200-220V 50 Hz, 200-230V 60 Hz
100%/5 sec.
3% ED (*5)
Rated Input, AC Volt. and
Frequency
Power
Supply
15
2
Voltage (*2)
Regenerative
Breaking Torque
11
9.0
Overload Current Rating (*1)
Output
7.5
20% (*5)
2% ED (*5)
Continuous (*5)
3-Phase 200-220 V 50 Hz, 200-240V 60 Hz
3-Phase 200-220 V 50 Hz, 200-230V 60 Hz
170-242V 50 Hz, 200-264V 60 Hz
170-242V 50 Hz, 170-253V 60 Hz
Tolerable AC Voltage Fluctuation
Tolerable Frequency Fluctuation
±5%
Amount of Instantaneous Voltage
Drop that can be Withstood
When operated at or above 165 V continuously and voltage falls from rated voltage to under 165 V, 15 ms of continuous operation
Supply (kVA) (*3)
5.0
6.5
Protective Structure (JEM 1030)
10
14
19
23
Width
Height
Depth
Notes: See next page.
39
48
57
77
90
123
Open type (IP00)
Cooling Method
Approximate Weight
33
Enclosed type (IP20) (*4)
Forced air cooling
kg
3.5
3.5
6
6
6
14
14
21
30
40
40
55
58
lbs
7.7
7.7
13.2
13.2
13.2
30.8
30.8
46.2
66
88
88
121
128
mm
150
150
220
220
250
250
250
250
340
450
450
480
480
inches
5.9
5.9
8.7
8.7
9.9
9.9
9.9
9.9
13.4
17.7
17.7
18.9
18.9
mm
260
260
260
260
400
400
400
400
550
550
550
700
700
inches
10.2
10.2
10.2
10.2
15.8
15.8
15.8
15.8
21.7
21.7
21.7
27.6
27.6
mm
163
163
193
193
218
218
218
218
195
250
250
250
270
inches
6.4
6.4
7.6
7.6
8.6
8.6
8.6
8.6
7.7
9.9
9.9
9.9
10.6
Mitsubishi Electric Automation
|
Variable Frequency Drives 379
n VARIABLE FREQUENCY DRIVES
V500 Ratings 480V Class 1.5K - 55K
Model FR-V540-_ _K-NA
Horsepower Rating (Hp)
Rated Current (A)
Overload Current Rating (*1)
Output
Voltage (*2)
Max. Time
Regenerative
Breaking Torque Tolerable
Work Rate
Rated Input, AC Volt. and
Frequency
Tolerable AC Voltage Fluctuation
Power
Tolerable Frequency Fluctuation
Supply
Amount of Instantaneous Voltage
Drop that can be Withstood
Supply (kVA) (*3)
Protective Structure (JEM 1030)
Cooling System
kg
Approximate Weight
lbs
mm
Width
inches
mm
Height
inches
mm
Depth
inches
1.5
2
4.5
2.2
3
6.5
3.7
5
10.0
100% / 5 sec.
5.5
7.5
11
15
18.5
22
30
7.5
10
15
20
25
30
40
14.5
18.5
27.5
35.5
44.0
51.8
67.0
150% 60 sec., 200% 0.5 sec. (inverse time characteristics)
3-Phase 380-480V 50 Hz/60 Hz
20% (*5)
2% ED (*5)
37
50
86.0
45
60
99.0
55
75
132.0
Continuous (*5)
3-Phase 380-480 V 50 Hz/60 Hz
323-528V 50 Hz/60 Hz
±5%
When operated at or above 320 V continuously and voltage falls from rated voltage to under 320 V, 15 ms of continuous operation
5.0
6.5
10.2
14
19
Enclosed type (IP20) (*4)
3.5
7.7
150
5.9
260
10.2
163
6.4
3.5
7.7
150
5.9
260
10.2
163
6.4
6
13.2
220
8.7
260
10.2
193
7.6
6
13.2
220
8.7
260
10.2
193
7.6
14
30.8
250
9.9
400
15.8
218
8.6
23
33
39
48
Forced air cooling
14
14
14
30.8
30.8
30.8
250
250
250
9.9
9.9
9.9
400
400
400
15.8
15.8
15.8
218
218
218
8.6
8.6
8.6
30
66
340
13.4
550
21.7
195
7.7
57
77
Open type (IP00)
35
77
450
17.7
550
21.7
250
9.9
35
77
450
17.7
550
21.7
250
9.9
90
123
36
79
480
18.9
700
27.6
250
9.9
65
143
480
18.9
700
27.6
270
10.6
Notes:
1. The overload current % value indicates the percentage to the inverter’s rated output current. For repeated duty, allow time for the inventer and motor to return to or below the temperature when at
100% load.
2. The maximum output voltage cannot exceed the power supply voltage. The maximum output voltage can be set below the power supply voltage.
3. The power capacity will vary according to the power supply side impedance (including input reactor and power lines) value.
4. When the wiring cover for the network option is removed and built-in options are installed, the protective structure will become open type (IP00).
5. For inverter capacities 1.5K to 15K, using the optional high-duty brake resistor (FR-ABR) will provide 100% torque/10% ED.
Dedicated Options V500 Series
Model
Number
Description
Installation Manual
Stocked Item
FR-PU04V
Parameter unit used for operation control, reading and writing parameters, drive monitoring, parameter copy and
multi-language
IB(NA)0600079
S
FR-V5AP
Pulse train input for advanced position control. Differential line receiver: 500kpps, open collector 200kpps
IB(NA)0600087
S
FR-V5AX
6 additional multi-function digital inputs and high resolution analog input (16-bit)
IB(NA)0600083
-
FR-V5AY
3 additional multi-function digital outputs and encoder pulse ratio output (differential or open collector output)
IB(NA)0600085
-
FR-V5AM
When used with additional encoder, machine side orientation can be performed
IB(NA)0600089
-
FR-V5NS
SSCNET motion control network operation
IB(NA)0600106E
S
FR-V5NE
Ethernet option for inverter setup and monitoring using LAN
IB(NA)0600108E
-
FR-V5AH
3-digit BCD or 12-bit binary code input for high accuracy speed control
IB(NA)0600110E
-
T-TRC50
Memory option used with setup software (FR-SW1-SETUP-WE) to analyze internal inverter trace data
Contact MEAU
-
SSCNET II Cables
Model Number
FR-V5NSCBL005
FR-V5NSCBL01
FR-V5NSCBL05
FR-V5NSCBL10
FR-V5NSCBL20
380
Instruction Manuals
Length
0.5 meter
1 meter
5 meters
10 meters
20 meters
Description
Connection of
Q172CPU to
FR-V5NS,
FR-V5NS to
FR-V5NS
Stocked Item
S
S
S
-
Model
FR-V520
FR-V540
FR-V560
FR-V500L
Basic
Detailed
Basic
Detailed
Basic
Detailed
Model Number
IB(NA)06000064
IB(NA)06000065
IB(NA)0600134
IB(NA)0600135
IB-T7311
IB-T7312
V500 General Specifications
Control Specifications
Control System
Control Mode
Analog
Input
Digital
Input
Acceleration / Deceleration Time
Acceleration / Deceleration
Pattern
Torque Restriction Level
Input Signal
Frequency Control
Resolution
Soft- PWM control or high carrier frequency sine-wave PWM control can be selected. Vector control or V/F control can be selected.
Speed control, torque control, position control
0.03% of maximum set speed
0.003% against maximum settings (0.1 rpm units for minimum setting)
0 to 3600 sec (0.1 second increments)
Linear, S pattern (3 types) or backlash compensation acceleration/deceleration can be selected
Torque restriction value can be set (0 to 400% variable)
Terminal No.
2
Analog Setting Signal
With Option FR-V5AX
Setting Range
0 to 10V (resolution
0.03%)
Speed Control
Torque Control
Main speed setting
Speed restriction
1
0 to ±10V (resolution
0.05%)
Auxiliary speed setting, magnetic
flux command regenerative torque
restriction
Speed restriction compensation, magnetic flux command,
driving side speed restriction
3
0 to ±10V (resolution
0.05%)
Torque restriction (Torque bias)
Torque command
0 to ±10V (resolution
0.003%)
Main speed setting (in this case,
terminals 1 and 2 are invalid) Torque
restriction
Speed restriction (at this time, terminal 2 is invalid) /
Torque command (at this time, terminal 3 is valid)
6
Environment
Contact Signal
3 fixed function
terminals
5 multi-function
terminals
With Option (FR-V5AX)
6 multi-function
terminals
Contact Signal
Open Collector Signal
With Option (FR-V5AY)
With Option (FR-V5AM)
With Option (FR-A5AY)
Analog Output
With Option (FR-A5AY)
Encoder Pulse Output Option
(FR-V5AY)
Operational Functions
Ambient Temperature
Ambient Humidity
Storage Temperature (*1)
Atmosphere
Attitude
Vibration
Display
Parameter Unit (FR-DU04-1/
FR-PU04V)
Alarm Definition
Protective Functions
1 Form C Relay
(230VAC 0.3A,
30VDC 0.3A)
3 multi-function
terminals
3 multi-function
terminals
1 multi-function
terminal
7 multi-function
terminals
0 to ±10V, 12 bits x
1CH 0 to 10V, 12 bits
x 1CH
0 to ±10V, 10 bits x
1CH 0 to 20mA, 10
bits x 1CH
Forward rotation command, alarm reset, external thermal relay
Selection can be made from reverse rotation command, multi-speed setting (max. 15 speeds), remote setting, jog operation,
second function selection, third function selection, output stop, three-wire control, pre-excitation, control mode switchover,
torque restriction selection, S pattern switchover, PID control terminal, orientation command, brake opening completion
signal, PU operation/external operation switchover, torque bias selection 1, torque bias selection 2, P control selection, servo
on, HC connection, PU/external interlock, external DC brake start, and commanded position selection.
Selection con be made from inverter running, up to speed, instantaneous power failure (undervoltage) speed detection,
second speed detection, third speed detection, PU operation mode, overload alarm, regenerative brake pre-alarm, electronic
thermal relay pre-alarm, output current detection, zero current detection, PID lower limit, PID upper limit, PID forward /reverse output, operation ready, operation ready 2. brake opening request, fan fault output, fin overheat pre-alarm, orientation
in-position, forward rotation output, reverse rotation output, low speed output, torque detection, regenerative status output,
minor fault output, alarm output, maintenance timer output, remote output, speed detection, in-position and trace status
Selection can be made from speed, output current, output voltage, preset speed, output frequency, motor torque, converter
output voltage, regenerative brake duty, electronic thermal relay load factor, output current peak value, converter output voltage peak value, load meter, motor exciting current, motor output, reference voltage
A phase, B phase, Z phase, (A and B phases can be divided) Open collector/differential line driver
Maximum/minimum speed setting, speed jump, external thermal relay input selection, polarity reversible operation, override function, automatic
restart operation after instantaneous power failure, forward/reverse operation prevention, operation mode selection, offline auto tuning function,
online auto tuning function, easy gain tuning, computer link operation, remote setting, brake sequence, second function, third function, multi-speed
operation, coasting to stop, power failure stop, PID control, speed feed forward, model adaptive speed control, master/slave, torque bias, 12-bit digital command (FR-A5AX option), pulse train input (FR-A5AP option), motor thermistor interface (FR-V5AX option), and simple positioning
-10°C to +50°C (Non-freezing) / 14°F to 122°F
90% RH or less (Noncondensing)
-20°C to +65°C / -4°F to 149°F
For indoor use; no corrosive gasses, flammable gasses, oil mist, dust or dirt present
1000m above sea level. Contact factory for higher altitude deratings.
5.9 m/s² (0.6G max.) based on JIS C 0911
Selection can be made from speed, output current, output voltage, preset speed, output frequency, motor torque, converter output voltage, regenerative brake duty, electronic thermal relay load factor, output current peak value, converter output voltage, peak value, input terminal status (PU04V),
load meter, motor exciting current, position pulse, cumulative energization time, actual operation time, motor load factor, torque command, torque
current command, feedback pulse, motor output, trace status
Alarm definition is displayed when protective function is activated. 8 past alarm definitions are stored. (Only 4 alarm definitions are stored in the
DU04-1)
Overcurrent shut-off (acceleration, deceleration, constant speed), regenerative overvoltage shut-off (acceleration, deceleration, constant speed), undervoltage, instantaneous power failure, overload shut-off (electronic thermal relay), brake transistor alarm, earth (ground) fault current, power output short circuit, stall prevention, external thermal relay, fin overheat, fan fault, option alarm, parameter error, PU disconnection, encoder no-signal,
large speed deviation, overspeed large position error, CPU error, encoder phase error, output phase loss excessive retries, brake sequence error
Notes:
1. Temperature that can be applied for short times, such as in transit.
Mitsubishi Electric Automation
|
Variable Frequency Drives 381
n VARIABLE FREQUENCY DRIVES
V500 Series Terminal Connection Diagram
Notes:
1. Terminal PR is provided on the 15kW and smaller capacities, and terminal PX is provided on the 5.5kW and smaller capacities.
2. When using FR-ABR with the 5.5kW or smaller capacity, remove this jumper.
3. Remove this jumper when using FR-BEL for 55kW and smaller capacities. DC link reactor included with 75kW and larger.
4. The converter’s life will be shortened by repeated in-rush currents when the power is turned ON, so do not turn the power ON and OFF frequently.
5. Prepare a ± 10V external power supply for terminals 1 and 3.
6. When using a motor without a thermal protector, set Pr.876 “Thermal protector input” to 0 and set Pr.9 (Pr.452) “Electronic thermal (2nd electronic thermal).
7. The terminal functions can be changed with the input terminal function selection (Pr.180 to Pr.183, Pr.187)
8. The terminal functions can be changed with the output terminal function selection (Pr.190 to Pr.192, Pr.195)
9. Change the connector according to the encoder power supply specifications.
10.The sink logic and source logic will change when the connector is changed.
11.Use of the 2W1kW is recommended when the settings are changed frequently.
12.Always ground the inverter and motor.
382
Packaged Solutions
Mitsubishi Packaged Solutions provide value added custom engineered solutions that exceed customer’s expectations for quality, price,
and performance. Each system is engineered and built to UL508A standards and factory tested before shipping. A complete AutoCAD
documentation package accompanies every order. VFDs, PLCs, HMIs, Servos, and more can be mounted and wired inside any NEMA
rated cabinet. Standard deliveries are 4 to 6 weeks.
Products Include:
• Pow-R-Gate HVAC II Drives
• Soft Start Pump Drives
• 18 Pulse Drives
• NEMA 12 and 3R Cabinets
• Irrigation Pump Drives
• PLC & HMI Cabinets
• Conveyor Drives
• Heat Sink Out The Back Drives
• Conduit Adapter
• Solar Control Cabinets
Options: Circuit breakers, fused disconnect switches, reactors,
matrix filters, communications cards, encoders, DB, AC line
regeneration, common DC bus, speed, torque, position regulators, transformers, any NEMA rated cabinet wall or floor mounted,
safety hardware, networks, and multiplexing
Products: 6 and 18 pulse, bypass, non-bypass, soft start bypass
VFDs, PLCs, HMIs, servos, networks, and computers all engineered and drafted using AutoCAD
Application Engineering: Support evaluating customer specifications, technical assistance, and the latest package designs
Enclosures: Wall, floor, NEMA 1, 3R, 4, 4X, 12, 12 ventilated,
air conditioned, Heat sink out the back, single or multi-bay, and
operator control stations
Factory Testing: All packaged solutions are tested prior to shipping. Witnessed combination tests are also available for special
customer requests.
Project Management: Experienced engineers to manage projects
from quote through startup
Warranty: Standard two year warranty on every packaged solution
Repeat Orders: Engineer once and manufacture many times to
save money
Demos: Any style demo unit to meet your needs
Manufacturing: Manufactured to UL508A standards, UL, cUL
with CSA and CE Standards available. Customer approval drawings issued for each order.
Mitsubishi Electric Automation
|
Variable Frequency Drives 383
n VARIABLE FREQUENCY DRIVES
FR-F700 based VFD Complete Bypass System - NEMA 1, NEMA 12, NEMA 3R
Base System Includes:
•
•
•
•
•
•
•
•
•
•
•
•
Pow-R-Gate bypass controller with LCD display
3 contactor bypass with TEST mode
Auto/manual bypass versions
Catch a spinning load / windmill start activated
Adjustable overload relay, class 20 equivalent
Programming / display keypad and speed setting dial
DC Link Choke as standard
Choice of fused disconnect, non-fused disconnect or
UL 489 circuit breaker (std)
Control transformer, fused primary & secondary
Terminal blocks for control connections
RS-485, Modbus RTU Communication standard,
EMI/RFI filter standard
Complete standard Mitsubishi testing
•
•
•
•
AutoCAD documentation packet
Instruction manuals for VFD and controller
UL / cUL 508
Hardware options: Input reactor, (3% or 5%), damper
vane actuator relay, extended analog output, hand-off-auto
switch with potentiometer, alphanumeric keypad
• Communications Options: BACnet MS/TP, Metasys N2,
LonWorks, Siemens FLN (P1), EtherNET IP, BACnet IP,
Modbus TCP/IP, ProfiNET
• 2 year warranty
• Additional features for NEMA 3R solutions:
Thermostatically controlled enclosure heating/cooling
Clear gasketed weatherproof entry door for Pow-R-Gate
bypass controller with LCD display
Screened entrance and exits for cooling air
Part number structure - Sized up to 40HP (208-240V) and 75HP (380 - 480V)
F
Symbol
Horsepower Rating
Symbol
001
1 - 40 HP (208V)
D
DC Link Choke
075
1 - 75 HP (480V)
3
3% Input Reactor (option)
5
5% Input Reactor (option)
Symbol
Symbol
Choke/Reactor Type
Options
S1
Damper vane actuator
relay fitted
S2
Hand Off autoswitch with
potentiometer
Extended analog output
Input Voltage
S3
2V
208 - 240V
Bypass Type
S4
Alphanumeric keypad
4V
380 - 480V
B
Manual 3 contactor bypass
S5
Drive trip/run relay (non-bypass only)
N
Non bypass
S6
100kA SCCR rating (fused types)
Disconnect Type
Symbol
C
UL 489 Circuit Breaker
D
Non-Fused Disconnect (option)
F
Fused Disconnect (200kA) (option)
Symbol
A
Auto bypass
Up to 3 options may be selected.
Symbol
RS
Enclosure Type
Symbol
1
NEMA 1
2
NEMA 12
3
NEMA 3R
Network Type
Enhanced RS 485 Capability
(BACnet, Siemens FLN,
Metasys N2)
Modbus RTU is standard
LN
Lonworks
ET
Ethernet Communications
(Ethernet IP, Modbus TCP/IP,
BACnet IP, ProfiNET)
Select one option if required.
Part number structure - Sized from 50 to 75HP (208-240V) and 100 to 200HP (380 - 480V)
F1C208V 05
Symbol
Voltage Class
208V
3 phase 60Hz input voltage
460V
3 phase 60Hz input voltage
384
Output HP
3-phase 60Hz
Symbol
Input Line Reactor Impedance
3
3%
5
5%
FR-F700 Based VFD Complete Bypass System - NEMA 1
Standard Product with
Circuit Breaker & 3 Contactor
Bypass VFD System
208V Based VFD System
Panel Size
460V Based VFD System
Panel Size
HP
KW
Model Number
Stk. Item
Amps
Model Number
Stk. Item
Amps
1
2
3
5
7.5
10
15
20
25
30
40
50
60
75
100
125
150
0.75
1.5
2.2
3.7
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
F1C2V001BD
F1C2V002BD
F1C2V003BD
F1C2V005BD
F1C2V007BD
F1C2V010BD
F1C2V015BD
F1C2V020BD
F1C2V025BD
F1C2V030BD
F1C2V040BD
F1C208V50HM30
-
S
S
S
S
S
S
S
S
S
S
-
4.2
7
9.6
15.2
23
31
45
58
70
85
114
140
170
-
N1A
N1A
N1A
N1A
N1B
N1B
N1B
N1B
N1C
N1C
N1D
N1E
N1E
-
F1C4V001BD
F1C4V002BD
F1C4V003BD
F1C4V005BD
F1C4V007BD
F1C4V010BD
F1C4V015BD
F1C4V020BD
F1C4V025BD
F1C4V030BD
F1C4V040BD
F1C4V050BD
F1C4V060BD
F1C4V075BD
F1C460V100HM30
F1C460V125HM30
F1C460V150HM30
S
S
S
S
S
S
S
S
S
S
S
S
S
-
2.1
3.5
4.8
7.6
11.5
16
23
29
35
43
57
70
85
106
144
180
180
200
132
-
-
-
-
F1C460V200HM30
-
260
Panel
Lbs
H (in)
W (in)
D (in)
N1A
N1B
N1C
N1D
N1E
70
150
200
285
210
32.3
50
60.3
65.7
68
12.5
16.5
25.5
25.5
27
10.8
13
13.8
15.3
18
Floor
Mount
850
78
47.25
20
N1A
N1A
N1A
N1A
N1A
N1A
N1B
N1B
N1C
N1C
N1C
N1D
N1D
N1D
N1E
N1E
N1E
Floor Mount
NEMA 12
FR-F700 Based VFD Complete Bypass System - NEMA 12
Standard Product with
Circuit Breaker & 3 Contactor
Bypass VFD System
208V Based VFD System
Panel Size
HP
KW
Model Number
Stk. Item
Amps
1
2
3
5
7.5
10
15
20
25
30
40
50
60
75
100
125
150
200
250
1
1.5
2.2
3.7
5.5
7.5
11
15
18.5
22
30
37
45
55
75
-
F2C2V001BD
F2C2V002BD
F2C2V003BD
F2C2V005BD
F2C2V007BD
F2C2V010BD
F2C2V015BD
F2C2V020BD
F2C2V025BD
F2C2V030BD
F2C2V040BD
F2C2V050BD
F2C2V060BD
F2C2V075BD
F2C2V100BD
-
-
4.2
7
9.6
15.2
23
31
45
58
70
85
114
140
170
212
288
-
Panel
Lbs
H (in)
W (in)
D (in)
Type
N12A
88
29
N12B
121
31
22
10
Wall
24
11.5
N12C
174
Wall
38
32
12
N12D
Wall
394
49
36
18
Wall
N12E
562
60
36
24
Wall
N12F
779
77
32
29
Floor
N12A
N12A
N12A
N12A
N12A
N12B
N12B
N12B
N12C
N12C
N12C
N12D
N12F
N12F
N12F
-
460V Based VFD System
Panel Size
Model Number
Stk. Item
Amps
F2C4V001BD
F2C4V002BD
F2C4V003BD
F2C4V005BD
F2C4V007BD
F2C4V010BD
F2C4V015BD
F2C4V020BD
F2C4V025BD
F2C4V030BD
F2C4V040BD
F2C4V050BD
F2C4V060BD
F2C4V075BD
F2C4V100BD
F2C4V125BD
F2C4V150BD
F2C4V200BD
F2C4V250BD
-
2.1
3.5
4.8
7.6
11.5
16
23
29
35
43
57
70
85
106
144
180
216
260
325
Mitsubishi Electric Automation
|
N12A
N12A
N12A
N12A
N12A
N12B
N12B
N12C
N12C
N12C
N12C
N12D
N12D
N12E
N12E
N12E
N12F
N12F
N12F
Variable Frequency Drives 385
n VARIABLE FREQUENCY DRIVES
FR-F700 Based VFD Complete Bypass System - NEMA 3R
Standard Product with
Circuit Breaker & 3 Contactor
Bypass VFD System
208V Based VFD System
HP
KW
Model Number
Stk. Item
Amps
1
2
3
5
7.5
10
15
20
25
30
40
50
60
75
100
125
1
1.5
2.2
3.7
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
F3C2V001BD
F3C2V002BD
F3C2V003BD
F3C2V005BD
F3C2V007BD
F3C2V010BD
F3C2V015BD
F3C2V020BD
F3C2V025BD
F3C2V030BD
F3C2V040BD
F3C2V050BD
-
-
4.2
7
9.6
15.2
23
31
45
58
70
85
114
140
-
Panel
Lbs
H (in)
W (in)
D (in)
Type
N3A
88
29
N3B
121
31
22
10
Wall
24
11.5
N3C
174
Wall
38
32
12
N3D
Wall
394
49
36
18
N3E
Wall
562
60
36
24
Wall
460V Based VFD System
Panel Size
N3A
N3A
N3A
N3A
N3A
N3B
N3C
N3C
N3D
N3D
N3D
N3E
-
Panel Size
Model Number
Stk. Item
Amps
F3C4V001BD
F3C4V002BD
F3C4V003BD
F3C4V005BD
F3C4V007BD
F3C4V010BD
F3C4V015BD
F3C4V020BD
F3C4V025BD
F3C4V030BD
F3C4V040BD
F3C4V050BD
F3C4V060BD
F3C4V075BD
F3C4V100BD
F3C4V125BD
-
2.1
3.5
4.8
7.6
11.5
16
23
29
35
43
57
70
85
106
144
180
N3A
N3A
N3A
N3A
N3A
N3B
N3B
N3C
N3C
N3C
N3C
N3D
N3D
N3E
N3E
N3E
FR-A700 Based VFD Complete Non-Bypass System - NEMA 3R
Irrigation Pump Drive - A700-NAS (PLC) Drive with GT1020-LBD HMI Door Mounted
Base System Includes:
• NEMA 3R enclosure RAL 7035 light gray
• Powder paint over galvanized steel, stainless steel hinge pins
• 120% overload for one minute, Non Bypass
• FR-DU07 drive mounted as standard
• Padlockable door hasp
• Provisions for pole mounting
•
•
•
•
•
Door mounted GT1020-LBD HMI and H-O-A selector switch
Compact, efficient, DownDraft™ chimney design
Input disconnect either fused or circuit breaker
Rotary operator, door interlocked for disconnect or circuit breaker
DC link reactor standard, 3 or 5% line reactors may be substituted
A31P
Symbol
2V
4V
Symbol
A31P
386
Input Voltage
3/60/208(230/240)VAC Input/Output
3/60/460(480)VAC Input/Output
Symbol
Choke/Reactor Type
D
DC Choke
3
3% Line Reactor
5
5% Line Reactor
S4
Symbol
Enclosure Type
Mitsubishi NEMA 3R Irrigation
Pump Drive A700-NA5 (PLC)
Symbol
Symbol
Horsepower Rating
001
1 HP
002
2 HP
003
3 HP
005
5 HP
007
7.5 HP
010
10 HP
015
15 HP
020
20 HP
025
25 HP
030
30 HP
700
700 HP
RS
Options
PU07 Keypad door mounted
with IP65 plastic cover
Network Type
Enhanced RS 485 Capability
(BACnet, Siemens FLN,
Metasys N2)
Modbus RTU is standard
LN
Lonworks
ET
Ethernet Communications
(Ethernet IP, Modbus TCP/IP,
BACnet IP, ProfiNET)
Select one option if required.
FR-A700 Based VFD Complete Non-Bypass System - NEMA 3R
Standard Product with
Circuit Breaker & 3 Contactor
Bypass VFD System
208V Based VFD System
Panel Size
HP
KW
Model Number
Stk. Item
Amps
1
2
3
5
7.5
10
15
20
25
30
40
50
60
75
100
125
150
200
250
300
350
400
450
500
550
650
700
1
1.5
2.2
3.7
5.5
7.5
11
15
18.5
22
30
37
45
55
75
93
112
149
187
225
261
299
336
373
410
485
522
A3IPC2V001ND
A3IPC2V002ND
A3IPC2V003ND
A3IPC2V005ND
A3IPC2V007ND
A3IPC2V010ND
A3IPC2V015ND
A3IPC2V020ND
A3IPC2V025ND
A3IPC2V030ND
A3IPC2V040ND
A3IPC2V050ND
A3IPC2V060ND
A3IPC2V075ND
A3IPC2V100ND
A3IPC2V125ND
A3IPC2V150ND
-
-
4.2
7
9.6
15.2
23
31
45
58
70
85
114
140
170
212
288
346
432
-
Panel
Lbs
H (in)
W (in)
D (in)
Type
N3A
88
29
N3B
121
31
22
10
Wall
24
11.5
N3C
174
Wall
38
32
12
N3D
Wall
394
49
36
18
Wall
N3E
562
60
36
24
Wall
N3F
779
72
32
24
Floor
N3G
1025
84
39
24
Floor
N3H
1225
90
48
24
Floor
N3A
N3A
N3A
N3A
N3A
N3B
N3B
N3B
N3C
N3C
N3C
N3D
N3D
N3D
N3E
N3E
N3E
-
460V Based VFD System
Panel Size
Model Number
Stk. Item
Amps
A3IPC4V001ND
A3IPC4V002ND
A3IPC4V003ND
A3IPC4V005ND
A3IPC4V007ND
A3IPC4V010ND
A3IPC4V015ND
A3IPC4V020ND
A3IPC4V025ND
A3IPC4V030ND
A3IPC4V040ND
A3IPC4V050ND
A3IPC4V060ND
A3IPC4V075ND
A3IPC4V100ND
A3IPC4V125ND
A3IPC4V150ND
A3IPC4V200ND
A3IPC4V250ND
A3IPC4V300ND
A3IPC4V350ND
A3IPC4V400ND
A3IPC4V450ND
A3IPC4V500ND
A3IPC4V550ND
A3IPC4V650ND
A3IPC4V700ND
-
2.1
3.5
4.8
7.6
11.5
16
23
29
35
43
57
70
85
106
144
180
216
260
325
361
432
481
547
610
683
770
866
Mitsubishi Electric Automation
|
N3A
N3A
N3A
N3A
N3A
N3B
N3B
N3B
N3B
N3C
N3C
N3D
N3D
N3D
N3D
N3D
N3E
N3E
N3E
N3F
N3F
N3F
N3G
N3G
N3G
N3G
N3H
Variable Frequency Drives 387
n VARIABLE FREQUENCY DRIVES
FR-F700 Based VFD Complete Bypass System - 18 Pulse Drives (meets IEEE519-1992)
3/60/460VAC only, Floor Mounted Cabinet - NEMA 12 Vent
Base System Includes:
• 18 Pulse construction built to UL508A standards
• AC Line reactor, Auto Transformer and DC Choke
• 3 Contactor Bypass or Soft Start Bypass
• Alpha controller door mounted
•
•
•
•
PU07 Keypad/Display door mounted
Incoming AC Line Circuit Breaker with rotary handle thur door
NEMA 12 ventilated cabinet
Standard Hoffman Gray Paint
F8
Symbol
Symbol
4V
B
3 Contactor Bypass
3/60/460(480)VAC Input/Output
N
No Bypass
Symbol
Circuit Breaker
F
Fused Disconnect
Symbol
8
Standard Product with
Circuit Breaker & 3 Contactor
Bypass VFD System
388
Bypass is manual as STD. Automatic Bypass is field
configurable with no additional hardware.
Disconnect Type
C
Symbol
Choke/Reactor Type
Input Voltage
Symbol
Horsepower Rating
001
1 HP
002
2 HP
Enclosure Type
003
3 HP
Mitsubishi NEMA 12 Vent
Commercial System
005
5 HP
007
7.5 HP
010
10 HP
015
15 HP
020
20 HP
025
25 HP
030
30 HP
040
40 HP
800
800 HP
480V Based VFD System
Panel
Size
HP
KW
Model Number
Stk. Item
Amps
10
15
20
25
30
40
50
60
75
100
125
150
200
250
300
350
400
450
500
550
650
700
800
7.5
11
15
18.5
22
30
37
45
55
75
90
110
150
185
220
250
300
335
375
400
485
500
600
F8C4V010BD
F8C4V015BD
F8C4V020BD
F8C4V025BD
F8C4V030BD
F8C4V040BD
F8C4V050BD
F8C4V060BD
F8C4V075BD
F8C4V100BD
F8C4V125BD
F8C4V150BD
F8C4V200BD
F8C4V250BD
F8C4V300BD
F8C4V350BD
F8C4V400BD
F8C4V450BD
F8C4V500BD
F8C4V550BD
F8C4V650BD
F8C4V700BD
F8C4V800BD
-
16
23
29
35
43
57
70
85
106
144
180
216
260
325
361
432
481
547
610
683
770
866
962
A
A
A
A
A
A
A
A
A
B
F
F
F
G
G
J
J
J
K
K
K
L
L
Options
S1
Damper vane actuator
relay fitted
S2
Hand Off autoswitch with
potentiometer
S3
Extended analog output
S4
PU07 Keypad door mounted
S5
Drive fault & run relay
Up to three options per drive maximum.
Symbol
Network Type
RS
Enhanced RS 485 Capability
(BACnet, Siemens FLN,
Metasys N2)
Modbus RTU is standard
LN
Lonworks
ET
Ethernet Communications
(Ethernet IP, Modbus TCP/IP,
BACnet IP, ProfiNET)
Select one option if required.
Panel
Lbs
H (in)
W (in)
D (in)
A
1500
90
36
24
B
1700
90
48
24
F
2800
90
72
36
G
3300
90
84
36
J
4100
90
108
36
K
5700
90
138
36
L
6500
90
150
36
General Options
RFI Filters
Filter Amps
RMS
208V - Hp
With >3%
Reactor
RF3-0006-4
6
RF3-0010-4
10
RF3-0018-4
RF3-0025-4
Model No.
208V - Hp*
Without
Reactor
240V - Hp*
With >3%
Reactor
240V - Hp*
Without
Reactor
480V - Hp*
With >3%
Reactor
1-1.5 Hp
1 Hp
2 Hp
1.5 Hp
18
3-5 Hp
2-3 Hp
25
7.5 Hp
5 Hp
480V - Hp*
Without
Reactor
600V - Hp*
With >3%
Reactor
600V - Hp*
Without
Reactor
1-1.5 Hp
1 Hp
1-3 Hp
1-2 Hp
-
-
-
2-3 Hp
1.5-2 Hp
5 Hp
3-5 Hp
-
-
-
5 Hp
3 Hp
7.5-10 Hp
7.5 Hp
-
-
-
7.5 Hp
5 Hp
15 Hp
10 Hp
-
-
-
Stocked Item
RF3-0033-4
33
10 Hp
7.5 Hp
10 Hp
7.5 Hp
20 Hp
15 Hp
-
-
-
RF3-0050-4
50
15 Hp
10 Hp
15 Hp
10 Hp
25-30 Hp
20-25 Hp
-
-
-
RF3-0070-4
70
20 Hp
15 Hp
20 Hp
15 Hp
40-50 Hp
30 Hp
-
-
-
RF3-0090-4
90
25 Hp
20 Hp
25-30 Hp
20 Hp
60 Hp
40-50 Hp
-
-
-
RF3-0130-4
130
30-40 Hp
25-30 Hp
40 Hp
25-30 Hp
75-100 Hp
60 Hp
-
-
-
RF3-0150-4
150
50 Hp
-
50 Hp
40 Hp
-
75 Hp
-
-
-
RF3-0330-4
330
60-100 Hp
40-75 Hp
60-125 Hp
50-100 Hp
125-250 Hp
100-200 Hp
-
-
-
RF3-0006-6
6
-
-
-
-
-
-
1-3 Hp
1-3 Hp
-
RF3-0010-6
10
-
-
-
-
-
-
5-7.5 Hp
5 Hp
-
RF3-0018-6
18
-
-
-
-
-
-
10-15 Hp
7.5-10 Hp
-
RF3-0025-6
25
-
-
-
-
-
-
20 Hp
15 Hp
-
RF3-0033-6
33
-
-
-
-
-
-
25-30 Hp
20 Hp
-
RF3-0050-6
50
-
-
-
-
-
-
40 Hp
25-30 Hp
-
RF3-0070-6
70
-
-
-
-
-
-
50-60 Hp
40-50 Hp
-
RF3-0090-6
90
-
-
-
-
-
-
75 Hp
60 Hp
-
RF3-0130-6
130
-
-
-
-
-
-
100-125 Hp
75-100 Hp
-
RF3-0150-6
RF3-0330-6
150
330
-
-
-
-
-
-
150 Hp
200-300 Hp
125-200 Hp
-
* Hp Based on NEC motor current ratings
RFI Filter Electrical Data
Model No.
Dissipation
Watts
Leakage
Current mA
Fig.
RF3-0006-4
RF3-0010-4
RF3-0018-4
RF3-0025-4
RF3-0033-4
RF3-0050-4
RF3-0070-4
RF3-0090-4
RF3-0130-4
RF3-0150-4
RF3-0330-4
RF3-0006-6
RF3-0010-6
RF3-0018-6
RF3-0025-6
RF3-0033-6
RF3-0050-6
RF3-0070-6
RF3-0090-6
RF3-0130-6
RF3-0150-6
RF3-0330-6
3.5
4.2
11
11
16
16
19
18
25
28
40
3.5
4.2
11
11
16
16
19
19
28
28
40
1.5
1.4
1.5
2.8
3.7
4.8
4.4
6.4
8.6
9.8
6
1.5
1.5
4.9
4.9
6.5
9.9
9.9
9.9
14.1
14.1
9.9
A
A
A
A
B
B
B
B
B
B
C
C
C
C
C
B
B
B
B
B
B
C
A
A
B
B
C
C
D
D
E
E
in
mm
in
mm
in
mm
in
mm
in
mm
Weight
(lb.)
Mass
(kg)
7
7
9
9
10.7
12.3
12.3
12.6
12.6
13.1
15.2
7.2
7.2
9.2
9.2
10.7
12.3
12.3
12.3
13.1
13.1
15.2
179
179
229
229
272
312
312
319
319
334
386
183
183
233
233
272
312
312
312
334
334
386
1.8
1.8
2.2
2.2
2.9
3.7
3.7
5
5
5
10.2
1.8
1.8
2.2
2.2
2.9
3.7
3.7
3.7
5
5
10.2
45
45
55
55
74
93
93
126
126
126
260
45
45
55
55
74
93
93
93
126
126
260
3.1
3.1
4.5
4.5
6.3
7.5
7.5
8.8
8.8
8.8
4.6
3.1
3.1
4.5
4.5
6.3
7.5
7.5
7.5
8.8
8.8
4.6
79
79
114
114
161
190
190
224
224
224
116
79
79
114
114
161
190
190
190
224
224
116
6.57
6.57
8.54
8.54
10.16
11.73
11.73
11.73
11.73
11.73
4.72
6.57
6.57
8.54
8.54
10.16
11.73
11.73
11.73
11.73
11.73
4.72
167
167
217
217
258
298
298
298
298
298
120
167
167
217
217
258
298
298
298
298
298
120
1.26
1.26
1.65
1.65
2.36
3.11
3.11
4.41
4.41
4.41
9.25
1.26
1.26
1.65
1.65
2.36
3.11
3.11
3.11
4.41
4.41
9.25
32
32
42
42
60
79
79
112
112
112
235
32
32
42
42
60
79
79
79
112
112
235
1.4
1.5
2.4
2.9
6
8.2
9.3
13.5
13.5
19.6
24.3
1.4
1.5
2.4
2.9
6
8.2
9.3
9.3
19.6
19.6
24.3
0.65
0.7
1.1
1.3
2.7
3.7
4.2
6.1
6.1
8.9
11
0.65
0.7
1.1
1.3
2.7
3.7
4.2
4.2
8.9
8.9
11
For additional information visit http://www.mtecorp.com/rfiemi.html
Figure A
Figure B
Mitsubishi Electric Automation
Figure C
|
Variable Frequency Drives 389
n VARIABLE FREQUENCY DRIVES
Line / Load Reactors
Input or Output Reactors
Open Type
Model No.
MRL-00101
MRL-00102
MRL-00103
MRL-00104
MRL-00201
MRL-00202
MRL-00203
MRL-00204
MRL-00401
MRL-00402
MRL-00403
MRL-00404
MRL-00801
MRL-00802
MRL-00803
MRL-00804
MRL-01201
MRL-01202
MRL-01203
MRL-01801
MRL-01802
MRL-01803
MRL-02501
MRL-02502
MRL-02503
MRL-03501
MRL-03502
MRL-03503
MRL-04501
MRL-04502
MRL-04503
MRL-05501
MRL-05502
MRL-05503
MRL-08001
MRL-08002
MRL-08003
MRL-10001
MRL-10002
MRL-10003
MRL-13001
MRL-13002
MRL-13003
MRL-16001
MRL-16002
MRL-16003
MRL-20001B14
MRL-20002B14
MRL-20003B14
MRL-25001B14
MRL-25002B14
MRL-25003B14
MRL-32001B14
MRL-32002B14
MRL-32003B14
MRL-40001B14
MRL-40002B14
MRL-40003B14
MRL-50001
MRL-50002
MRL-50003
MRL-60001
MRL-60002
MRL-60003
MRL-75001
MRL-75002
MRL-75003
MRL-85001
MRL-85002
MRL-85003
MRL-100001
MRL-100002
MRL-100003
390
Stocked
Item
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
-
NEMA 1 Type
Model No.
MRL-00111
MRL-00112
MRL-00113
MRL-00114
MRL-00211
MRL-00212
MRL-00213
MRL-00214
MRL-00411
MRL-00412
MRL-00413
MRL-00414
MRL-00811
MRL-00812
MRL-00813
MRL-00814
MRL-01211
MRL-01212
MRL-01213
MRL-01811
MRL-01812
MRL-01813
MRL-02511
MRL-02512
MRL-02513
MRL-03511
MRL-03512
MRL-03513
MRL-04511
MRL-04512
MRL-04513
MRL-05511
MRL-05512
MRL-05513
MRL-08011
MRL-08012
MRL-08013
MRL-10011
MRL-10012
MRL-10013
MRL-13011
MRL-13012
MRL-13013
MRL-16011
MRL-16012
MRL-16013
MRL-20011B14
MRL-20012B14
MRL-20013B14
MRL-25011B14
MRL-25012B14
MRL-25013B14
MRL-32011B14
MRL-32012B14
MRL-32013B14
MRL-40011B14
MRL-40012B14
MRL-40013B14
MRL-50011
MRL-50012
MRL-50013
MRL-60011
MRL-60012
MRL-60013
MRL-75011
MRL-75012
MRL-75013
MRL-85011
MRL-85012
MRL-85013
MRL-100011
MRL-100012
MRL-100013
Stocked
Item
-
208-240V
1//4Hp @ 3%, 1/3-3/4Hp @ 5%
1/4Hp @ 5%
1/3-3/4Hp @ 3%
1Hp @ 3%
1Hp @ 5%
1.5-2Hp @ 3%
1.5-2Hp @ 5%
3Hp @ 3%
3Hp @ 5%
5Hp @ 3%
5Hp @ 5%
7.5Hp @ 3%
7.5Hp @ 5%
10Hp @ 3%
10Hp @ 5%
15Hp @ 3%
15Hp @ 5%
20Hp @ 3%
20Hp @ 5%
25-30Hp @ 3%
25-30Hp @ 5%
40Hp @ 3%
40Hp @ 5%
50Hp @ 3%
50Hp @ 5%
60Hp @ 3%
60Hp @ 5%
75Hp @ 3%
75Hp @ 5%
100Hp @ 3%
100Hp @ 5%
125Hp @ 3%
125Hp @ 5%
150Hp @ 3%
150Hp @ 5%
200Hp @ 3%
200Hp @ 5%
-
3 Phase Voltage Class
480V
1/4-1/3Hp @ 5%
1/4-1/3Hp @ 3%, 1/2Hp @ 5%
1/4-1/2Hp @ 1.5%. 1/2Hp @ 3%
3/4-1.5Hp @ 3%
3/4-1.5Hp @ 5%
3/4-1.5Hp @ 5%
2-3Hp @ 1.5%
2-3Hp @ 3%
2-3Hp @ 5%
5Hp @ 1.5%
5Hp @ 3%
5Hp @ 5%
7.5Hp @ 1.5%
7.5Hp @ 3%
7.5Hp @ 5%
10Hp @ 1.5%
10Hp @ 3%
10Hp @ 5%
15Hp @ 1.5%
15Hp @ 3%
15Hp @ 5%
20-25Hp @ 1.5%
20-25Hp @ 3%
20-25Hp @ 5%
30Hp @ 1.5%
30Hp @ 3%
30Hp @ 5%
40Hp @ 1.5%
40Hp @ 3%
40Hp @ 5%
50-60Hp @ 1.5%
50-60Hp @ 3%
50-60Hp @ 5%
75Hp @ 1.5%
75Hp @ 3%
75Hp @ 5%
100Hp @ 1.5%
100Hp @ 3%
100Hp @ 5%
125Hp @ 1.5%
125Hp @ 3%
125Hp @ 5%
150Hp @ 1.5%
150Hp @ 3%
150Hp @ 5%
200Hp @ 1.5%
200Hp @ 3%
200Hp @ 5%
250Hp @ 1.5%
250Hp @ 3%
250Hp @ 5%
300Hp @ 1.5%
300Hp @ 3%
300Hp @ 5%
350-400Hp @ 1.5%
350-400Hp @ 3%
350-400Hp @ 5%
500Hp @ 1.5%
500Hp @ 3%
500Hp @ 5%
600Hp @ 1.5%
600Hp @ 3%
600Hp @ 5%
700Hp @ 1.5%
700Hp @ 3%
700Hp @ 5%
800Hp @ 1.5%
800Hp @ 3%
800Hp @ 5%
600V
1/4-1/3Hp @ 5%
1/4-1/3Hp @ 3%, 1/2Hp @ 5%
1/4-1/3Hp @ 1.5%. 1/2Hp @ 3%
1/2Hp @ 1.5%
3/4-1.5Hp @ 1.5%
3/4-1.5Hp @ 3%
3/4-1.5Hp @ 5%
2-3Hp @ 1.5%
2-3Hp @ 3%
2-3Hp @ 5%
7.5Hp @ 1.5%
5Hp @ 1.5%, 7.5Hp @ 3%
5Hp @ 3%, 7.5Hp @ 5%
5Hp @ 5%
10Hp @ 1.5%
10Hp @ 3%
10Hp @ 5%
15Hp @ 1.5%
15Hp @ 3%
15Hp @ 5%
20-25Hp @ 1.5%
20-25Hp @ 3%
20-25Hp @ 5%
30Hp @ 1.5%
30Hp @ 3%
30Hp @ 5%
40Hp @ 1.5%
40Hp @ 3%
40Hp @ 5%
50Hp @ 1.5%
50Hp @ 3%
50Hp @ 5%
60-75Hp @ 1.5%
60-75 Hp @ 3%
60-75 Hp @ 5%
100Hp @ 1.5%
100Hp @ 3%
100Hp @ 5%
125Hp @ 1.5%
125Hp @ 3%
125Hp @ 5%
150Hp @ 1.5%
150Hp @ 3%
150Hp @ 5%
200Hp @ 1.5%
200Hp @ 3%
200Hp @ 5%
250Hp @ 1.5%
250Hp @ 3%
250Hp @ 5%
300Hp @ 1.5%
300Hp @ 3%
300Hp @ 5%
350-400Hp @ 1.5%
350-400Hp @ 3%
350-400Hp @ 5%
500Hp @ 1.5%
500Hp @ 3%
500Hp @ 5%
600Hp @ 1.5%
600Hp @ 3%
600Hp @ 5%
700Hp @ 1.5%
700Hp @ 3%
700Hp @ 5%
800Hp @ 1.5%
800Hp @ 3%
800Hp @ 5%
-
Line / Load Reactor Electrical Data
Model Number
Watts Loss
Wire Range (AWG)
MRL-00201
MRL-00202
MRL-00203
MRL-00204
MRL-00401
MRL-00402
MRL-00403
MRL-00404
MRL-00801
MRL-00802
MRL-00803
MRL-00804
MRL-01201
MRL-01202
MRL-01203
MRL-01801
MRL-01802
MRL-01803
MRL-02501
MRL-02502
MRL-02503
MRL-03501
MRL-03502
MRL-03503
MRL-04501
MRL-04502
MRL-04503
MRL-05501
MRL-05502
MRL-05503
MRL-08001
MRL-08002
MRL-08003
MRL-10001
MRL-10002
MRL-10003
MRL-13001
MRL-13002
MRL-13003
MRL-16001
MRL-16002
MRL-16003
MRL-20001B14
MRL-20002B14
MRL-20003B14
MRL-25001B14
MRL-25002B14
MRL-25003B14
MRL-32001B14
MRL-32002B14
MRL-32003B14
MRL-40001B14
MRL-40002B14
MRL-40003B14
MRL-50001
MRL-50002
MRL-50003
MRL-60001
MRL-60002
MRL-60003
MRL-75001
MRL-75002
MRL-75003
MRL-85001
MRL-85002
MRL-85003
MRL-90001
MRL-90002
MRL-90003
MRL-100001
MRL-100002
MRL-100003
8
12
16
11
15
20
20
21
20
29
26
28
26
31
41
36
43
43
48
52
61
49
54
54
54
62
65
64
67
71
82
86
96
94
84
108
108
180
128
116
149
138
124
168
146
154
231
219
224
264
351
231
333
293
266
340
422
307
414
406
427
630
552
798
930
1133
860
1020
1365
940
1090
1500
22 14
22 14
22 14
22 14
22 14
22 14
22 14
22 14
22 14
22 14
22 14
22 14
22 5
22 5
22 5
22 5
22 5
22 5
22 5
22 5
22 5
22 5
22 5
18 4
18 4
18 4
18 4
6 0
6 0
6 0
6 0
6 0
6 0
6 0
6 0
6 0
2 0000
2 0000
2 0000
2 0000
2 0000
2 0000
Copper Tab
Copper Tab
Copper Tab
Copper Tab
Copper Tab
Copper Tab
Copper Tab
Copper Tab
Copper Tab
Copper Tab
Copper Tab
Copper Tab
Copper Tab
Copper Tab
Copper Tab
Copper Tab
Copper Tab
Copper Tab
Copper Tab
Copper Tab
Copper Tab
Copper tab
Copper tab
Copper tab
Copper tab
Copper tab
Copper tab
Copper tab
Copper tab
Copper tab
Terminal Torque
(in / lbs)
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
16
16
16
16
16
16
16
16
16
16
16
20
20
20
20
6-4(45) & 2-0(50)
6-4(45) & 2-0(50)
6-4(45) & 2-0(50)
6-4(45) & 2-0(50)
6-4(45) & 2-0(50)
6-4(45) & 2-0(50)
6-4(45) & 2-0(50)
6-4(45) & 2-0(50)
6-4(45) & 2-0(50)
150
150
150
150
150
150
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Ind.
mH
12
20
32
6
3
6.5
9
12
1.5
3
5
7.5
1.25
2.5
4.2
0.8
1.5
2.5
0.5
1.2
1.8
0.4
0.8
1.2
0.3
0.7
1.2
0.25
0.5
0.85
0.2
0.4
0.7
0.15
0.3
0.45
0.1
0.2
0.3
0.075
0.15
0.23
0.055
0.11
0.185
0.045
0.09
0.15
0.04
0.075
0.125
0.03
0.06
0.105
0.025
0.05
0.085
0.02
0.04
0.065
0.015
0.029
0.048
0.015
0.027
0.042
0.013
0.025
0.04
0.011
0.022
0.038
Max
Amps
3
3
3
3
6
6
6
6
12
12
12
12
18
18
18
27
27
27
37.5
37.5
37.5
52.5
52.5
52.5
67.5
67.5
67.5
82.5
82.5
82.5
120
120
120
150
150
150
195
195
195
240
240
240
300
300
300
375
375
375
480
480
480
600
600
600
750
750
750
900
900
900
1125
1125
1125
1063
1063
1063
1125
1125
1125
1250
1250
1250
Fund Amps
2
2
2
2
4
4
4
4
8
8
8
8
12
12
12
18
18
18
25
25
25
35
35
35
45
45
45
55
55
55
80
80
80
100
100
100
130
130
130
160
160
160
200
200
200
250
250
250
320
320
320
400
400
400
500
500
500
600
600
600
750
750
750
850
850
850
900
900
900
1000
1000
1000
For additional information visit http://www.mtecorp.com/lineload.html
Mitsubishi Electric Automation
|
Variable Frequency Drives 391
n VARIABLE FREQUENCY DRIVES
Sine Wave dV/dT Filters (2-8kHz Carrier Frequency)
460VAC
Motor HP
1.5
2
3
5
7.5
10
15
20
25
30
40
50
60
75
100
125
150
200
250
300
350
400
450
500
600
Filter Rating Amps
Open
Model No.
Stocked Item
NEMA 1*
Model No.
Stocked Item
9
SWAP0009D
-
SWAGA0009D
-
12
17
22
27
35
45
55
65
80
110
130
160
200
250
305
365
415
SWAP0012D
SWAP0017D
SWAP0022D
SWAP0027D
SWAP0035D
SWAP0045D
SWAP0055D
SWAP0065D
SWAP0080D
SWAP0110D
SWAP0130D
SWAP0160D
SWAP0200D
SWAP0250D
SWAP0305D
SWAP0365D
SWAP0415D
-
SWAGA0012D
SWAGA0017D
SWAGB0022D
SWAGB0027D
SWAGB0035D
SWAGB0045D
SWAGB0055D
SWAGB0065D
SWAGC0080D
SWAGC0110D
SWAGC0130D
SWAGC0160D
SWAGD0200D
SWAGD0250D
SWAGD0305D
SWAGD0365D
SWAGD0415D
-
515
SWAP0515D
-
SWAGD0515D
-
600
720
SWAP0600D
SWAP0720D
-
SWAGE0600D
SWAGE0720D
-
* Note: Some enclosures meet NEMA 2. For more information, visit www.mtecorp.com
DC Chokes
Model No.
DCA000204
DCA000402
DCA000403
DCA000404
DCA000902
DCA000903
DCA000904
DCA001202
DCA001203
DCA001204
DCA001802
DCA001803
DCA001804
DCA001805
DCA002503
DCA002505
DCA003201
DCA003202
DCA003203
DCA004002
DCA004003
DCA004004
DCA005001
DCA005003
DCA005004
DCA006201
DCA008002
DCA008005
DCA009202
DCA009203
DCA011002
DCA011003
DCA012502
DCA015002
DCA015004
DCA020002
392
208V
240V
480V
1/4hp @ 5%
1/4hp @ 5%
1/2hp @ 3% &1/2-1hp@ 5%
1/2hp @ 3% & 3/4-1hp@ 5% 1/2hp @ 3% & 3/4-1hp@ 5%
2hp @ 3%
1/2hp @ 5%
1/2hp @ 5%
1.5hp @ 3%
1.5hp @ 5% & 2hp @5%
1.5hp @ 3%
1.5 & 2hp @ 3%
1.5 & 2hp @ 5%
1.5 & 2hp @ 5%
3 & 5hp @ 3%
3 & 5hp @ 5%
2hp @ 3%
3hp @ 3%
3hp @ 5%
3hp @ 5%
600V
3/4-1hp @ 3&5%
1.5hp & 2hp @ 3%& 5%
3 & 5hp @ 3 & 5%
7.5hp @ 3 & 5%
3hp@3% & 5hp@5%
7.5hp @ 3%
7.5hp @ 5%
10hp @ 3%
10hp @ 5%
5hp @ 3%
5hp @ 5%
7.5hp @ 3%
7.5hp @ 5%
10hp @ 3%
10hp @ 5%
10hp @ 3%
7.5hp @ 3%
7.5hp @ 3 & 5%
15hp @ 3%
15hp @ 5%
10hp @ 3%
10hp @ 5%
15hp @ 3 & 5%
20hp @ 3%
20hp @ 5%
20 & 25hp @ 3 & 5%
25hp @ 3%
25hp @ 5%
30hp @ 3%
30hp @ 5%
30hp @ 5%
40hp @ 3%
40hp @ 5%
15hp @ 3%
15hp @ 5%
15hp @ 3%
20hp @ 3%
50hp @ 5%
60hp @ 3%
60hp @ 5%
30hp @ 5%
40hp @ 5%
50hp @ 5%
60hp @ 5%
30hp @ 5%
40hp @ 3%
100hp @ 5%
60hp @ 5%
60hp @ 5%
75hp @ 3 & 5%
Stocked Item
-
DC Choke Electrical Data
Model No.
DC Amps
mH
Watts
Lug Size
Torque
Unit Weight (lbs)
DCA000204
DCA000402
DCA000403
DCA000404
DCA000902
DCA000903
DCA000904
DCA001201
DCA001202
DCA001203
DCA001204
DCA001801
DCA001802
DCA001803
DCA001804
DCA001805
DCA002503
DCA002504
DCA002505
DCA003201
DCA003202
DCA003203
DCA004001
DCA004002
DCA004003
DCA004004
DCA005001
DCA005003
DCA005004
DCA006201
DCA006202
DCA008002
DCA008005
DCA009201
DCA009202
DCA009203
DCA011002
DCA011003
DCA012502
DCA015002
DCA015004
DCA020002
2
4
4
4
9
9
9
12
12
12
12
18
18
18
18
18
25
25
25
32
32
32
40
40
40
40
50
50
50
62
62
80
80
92
92
92
110
110
125
150
150
200
50
12
15
25
3.22
7.5
11.5
1
1
4
6
0.65
1.375
2.75
3.75
6
1.275
1.75
4
0.85
1.62
2.68
0.5
0.75
1
2
0.625
1.35
2
0.32
0.61
0.4
1.25
0.2
0.6
1
0.3
0.45
0.22
0.22
0.65
0.21
5
5
6
9
7
11
16
5
7
11
14
5
9
16
17
20
13
13
16
11
14
21
14
15
17
29
18
21
30
17
20
25
25
19
34
48
38
45
27
36
66
50
22-14
22-14
22-14
18-4
22-14
18-4
18-4
22-14
18-4
18-4
18-4
18-4
18-4
18-4
18-4
18-4
18-4
18-4
18-4
18-4
18-4
18-4
18-4
18-4
18-4
18-4
18-4
18-4
6-0
6-0
6-0
6-0
6-0
6-0
6-0
6-0
6-0
6-0
6-0
2-0000
2-0000
2-0000
4.5
4.5
4.5
20
4.5
20
20
4.5
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
6-4(45) &2-0
6-4(45) &2-0
6-4(45) &2-0
6-4(45) & 2-0(50)
6-4(45) & 2-0(50)
6-4(45) & 2-0(50)
6-4(45) & 2-0(50)
6-4(45) & 2-0(50)
6-4(45) & 2-0(50)
6-4(45) & 2-0(50)
6-4(45) & 2-0(50)
150
150
150
2
2
2
4
2
4
7
1
2
4
7
2
4
7
8
13
7
5
13
5
10
14
5
7
8
21
8
15
25
8
14
14
35
10
23
32
22
22
23
23
52
39
For additional information, visit http://www.mtecorp.com/dclink.html
Matrix Harmonic Filters, 5% THID
480V, 60Hz, Variable Torque Loads
Filter
Max
Load
Amps
6
8
11
14
21
27
34
44
52
66
83
103
128
165
208
240
320
403
482
636
786
3 Phase Circuit Breaker
Motor HP
NEC
Motor
Amps
Open Panel
Filter Style
Gen. Purpose NEMA 2
Gen. Purpose NEMA 3R
Amps
Model No. (*)
Model No. (*)
Model No. (*)
3
5
7.5
10
15
20
25
30
40
50
60
75
100
125
150
200
250
300
400
500
600
4.8
7.6
11
14
21
27
34
40
52
65
77
96
124
156
180
240
302
361
477
590
708
MDP0006D
MDP0008D
MDP0011D
MDP0014D
MDP0021D
MDP0027D
MDP0034D
MDP0044D
MDP0052D
MDP0066D
MDP0083D
MDP0103D
MDP0128D
MDP0165D
MDP0208D
MDP0240D
MDP0320D
MDP0403D
MDP0482D
MDP0636D
MDP0786D
MDG0006D
MDG0008D
MDG0011D
MDG0014D
MDG0021D
MDG0027D
MDG0034D
MDG0044D
MDG0052D
MDG0066D
MDG0083D
MDG0103D
MDG0128D
MDG0165D
MDG0208D
MDG0240D
MDG0320D
MDG0403D
MDG0482D
MDG0636D
MDG0786D
MDW0006C
MDW0008C
MDW0011C
MDW0014C
MDW0021C
MDW0027C
MDW0034C
MDW0044C
MDW0052C
MDW0066C
MDW0083C
MDW0103C
MDW0128C
MDW0165C
MDW0208C
MDW0240C
MDW0320C
MDW0403C
MDW0482C
MDW0636C
MDW0786C
15A
20A
25A
30A
40A
50A
60A
70A
80A
90A
100A
125A
150A
175A
200A
225A
250A
400A
600A
800A
* Non-stock. For use with bypass systems contactor option 010 or 011 is additionally required. For additional
information, visit http://www.mtecorp.com/matrix.html
NEMA 1 Enclosed
Model No. (*)
T1N015TL1
T1N020TL1
T1N025TL1
T1N030TL1
T1N040TL1
T1N050TL1
T1N060TL1
T1N070TL1
T1N080TL1
T1N090TL1
T1N100TL1
T3N125TL1
T3N150TL1
T3N175TL1
T3N200TL1
T3N225TL1
T4N250BL1
T5N400BL1
S6N600BL1
S6N800BL1
NEMA 3R Enclosed
Model No. (*)
T1N015TL3
T1N020TL3
T1N025TL3
T1N030TL3
T1N040TL3
T1N060TL3
T1N070TL3
T1N080TL3
T1N090TL3
T1N100TL3
T3N125TL3
T3N150TL3
T3N175TL3
T3N200TL3
T3N225TL3
T4N250BL3
T5N400BL3
S6N600BL3
S6N800BL3
* Non-stock. For additional information, visit
http://www.abb-control.com/products/lv023-molded_casebreakers.htm
Mitsubishi Electric Automation
|
Variable Frequency Drives 393
n VARIABLE FREQUENCY DRIVES
Micro MAX™ AC Inverter Duty Motor
1000:1 Constant Torque (TENV) • 20:1 Constant Torque (TEFC)
Designed for direct replacement of PMDC or any other variable speed application where up to a 1000:1 constant torque speed range
is required. Typical uses include: machine tools, conveyors, packaging machines, batching machines and printing equipment.
• Replaces 90 and 180 volt PMDC motors when used with
AC variable frequency drives
• Constant torque operation from 0 to base speed (TENV ratings)
• Constant torque operation from 1/20 speed to base speed
(TEFC ratings)
• Constant horsepower to twice base speed (RPM)
• Class H insulation with CR200 magnetic wire
• Continuous duty at 40°C ambient
• “Quick Connect” terminal board as noted
• Top mounted conduit box with pigtail leads
(TEFC and 1.5Hp TENV)
• UL recognized and CSA certified
• Three year warranty
C-Face with Rigid Base
Hp
RPM
Volts
Encl.
Frame
Catalog No.
F.L.A.
Weight
Notes
1/8
1/4
1/3
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
230
230
230
230
230/460
575
230
230/460
575
230
230/460
575
230
230/460
575
230
230/460
575
230
230/460
575
230/460
575
230/460
575
230/460
TENV
TENV
TENV
TENV
TENV
TENV
TEFC
TEFC
TEFC
TEFC
TEFC
TEFC
TENV
TENV
TENV
TEFC
TEFC
TEFC
TEFC
TEFC
TEFC
TEFC
TEFC
TEFC
TEFC
TEFC
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
145TC
145TC
145TC
145TC
145TC
145TC
182TC
182TC
182TC
184TC
184TC
213TC
213TC
215TC
Y605 *
Y500 *
Y502 *
Y504 *
Y360 *
Y361 *
Y506 *
Y362 *
Y363
Y508 *
Y364 *
Y365 *
Y522 *
Y366 *
Y367 *
Y523 *
Y368 *
Y369 *
Y998
Y999 *
Y270
Y372 *
Y373
Y994 *
Y995
Y996 *
1.0
1.0
1.2
1.8
1.8/0.9
0.7
2.8
2.8/1.4
1.1
3.2
3.2/1.6
1.3
4.8
4.8/2.4
1.9
5.8
5.8/2.9
2.3
8.4
8.4/4.2
3.5
13.4/6.7
5.4
21.4/10.7
8.5
28.0/14.0
18
18
18
20
20
20
23
23
23
28
28
28
49
49
49
50
50
50
70
70
70
88
88
125
125
135
N, Q
N, Q
N, Q
N, Q
N
N, Q
N, 6
N, 6
N, 6
6
6
6
6
6
-
1800
575
TEFC
215TC
Y997
11.2
135
-
1/2
3/4
1
1 1/2
2
3
5
7 1/2
10
1. * Marathon Motors stock item.
2. For additional information visit www.marathonelectric.com/motors/search.asp
C-Face Footless
Hp
RPM
Volts
Encl.
Frame
Catalog No.
F.L.A.
Weight
Notes
1/8
1/4
1/3
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
230
230
230
230
230/460
575
230
230/460
575
230
230/460
TENV
TENV
TENV
TENV
TENV
TENV
TEFC
TEFC
TEFC
TEFC
TEFC
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
Y606 *
Y501 *
Y503 *
Y505 *
Y374 *
Y375 *
Y507 *
Y376 *
Y377
Y521 *
Y378 *
1.0
1.0
1.2
1.8
1.8/0.9
0.7
2.8
2.8/1.4
1.1
3.2
3.2/1.6
17
17
17
19
19
19
23
23
23
27
27
N, Q
N, Q
N, Q
N, Q
N
N, Q
1800
575
TEFC
56C
Y379 *
1.3
27
1/2
3/4
1
* Marathon Motors stock item.
Notes:
1. N: Totally Enclosed Non Ventilated; Q: “Quick Connect” terminal board; 6: Bolt-on, removable base for footless mounting option.
2. For additional information visit www.marathonelectric.com/motors/search.asp
394
Black MAX™ Vector Duty
1000:1 Constant Torque
Designed for inverter or vector duty applications where up to a 1000:1 constant torque speed range is required. Typical uses include:
material handling, machine tools, conveyors, crane & hoist, metal processing and other industrial machinery installed in dusty or
dirty environments.
• Class F MAX GUARD insulation system
• Constant torque operation from 0 to base speed
on vector drive
• Constant horsepower to twice base speed (RPM)
• Continuous duty at 40°C ambient
• Optimized for operation with IGBT inverter (NEMA Design A)
• Class F N/C thermostats
•
•
•
•
Ball bearing
Removable Base on some models as noted
F1 standard, field reversible to F2 (except where noted)
Encoder and brake provisions included on opposite drive end
(maximum 10 lb-ft brake)
• UL recognized and CSA certified
• Three year warranty
Totally Enclosed Non-Ventilated, C-Face with Rigid Base
Hp
1/4
1/2
1
1 1/2
2
3
5
7 1/2
10
15
20
25
30
RPM
1800
1800
1800
1800
1800
1800
1200
1800
1800
1800
1200
1800
1800
1200
1800
1800
1200
1800
1800
1200
1800
1800
1200
1800
1800
1800
1800
1800
1800
1800
Volts
230/460
230/460
575
230/460
575
230/460
230/460
230/460
230/460
575
230/460
230/460
575
230/460
230/460
575
230/460
230/460
575
230/460
230/460
575
230/460
230/460
575
230/460
575
230/460
575
230/460
Frame
56C
56C
56C
56C
56C
143TC
145TC
145TC
145TC
145TC
184TC
182TC
182TC
213TC
184TC
184TC
215TC
213TC
213TC
254TC
215TC
215TC
256TC
254TC
254TC
256TC
256TC
284TC
284TC
286TC
Catalog No.
Y592 *
Y534 *
Y555 *
Y535 *
Y556 *
Y536 *
Y537 *
Y538 *
Y551 *
Y557 *
Y540 *
Y541 *
Y558 *
Y542 *
Y543 *
Y559 *
Y544 *
Y545 *
Y560 *
Y546 *
Y547 *
Y561 *
Y548 *
Y549 *
Y562 *
Y552 *
Y563 *
Y553 *
Y567 *
Y393 *
F.L.A.
1.2/0.6
1.6/0.8
0.6
3.0/1.5
1.2
3.0/1.5
3.8/1.9
4.8/2.4
6.0/3.0
2.4
6.6/3.3
8.4/4.2
3.4
9.4/4.7
14.0/7.0
5.4
15.4/7.7
21.0/10.5
8.4
22.0/11.0
27.0/13.5
10.8
28.0/14.0
40.0/20.0
16.0
50.0/25.0
20.0
62.0/31.0
24.8
80.0/40.0
Weight
19
28
28
39
40
43
49
50
70
70
88
93
98
118
103
103
128
146
150
209
159
159
275
250
250
320
320
525
525
575
Notes
N, S, 13
N, S, 6, 13
N, S, 6, 13
N, S, 6, 13
N, S, 6, 13
N, S, 6, 13
N, S, 6, 13
N, S, 6, 13
N
N
N, AL
N, AL
N, AL
N, AL
N, AL
N, AL
N, AL
N, AL
N, AL
N, AL
N, AL
N, AL
N, AL
N, AL, I
N, AL, I
N, I
N, I
N, I
N, I
N, I
* Marathon Motors stock item. Shaded areas are cast iron frames.
Notes:
1. AL: Aluminum Frame Construction; N: Totally Enclosed Non-Ventilated; I: Intermittent duty from 90-120Hz operation; S: Steel Frame Construction; 6: Bolt-on, removable base for
footless mounting option; 13: F1 Mounting only, cannot modify to F2.
2. For additional information visit www.marathonelectric.com/motors/search.asp
Black MAX™ Vector Duty: Encoders through Mod Center
Brand
Model
HS25A
HS35A
Avtron
HS35M
M3
M56
Dynapar
HS35
BEI
HS35
PPR
1024
2048
1024
2048
1024
2048
1024
1024
1024
2048
1024
2048
Catalog No.
A746*
A747*
A736*
A739*
A742*
A744
A753*
A793*
A772*
A776*
A779*
A780*
Notes
Optical Hollow Shaft, MS connector
Optical Hollow Shaft, MS connector
Magnetic Hollow Shaft, EPIC connector
Optical Hollow Shaft, EPIC connector
Magnetic Modular Style, EPIC connector
Shaft mount, 5-26VDC, with 10 pin connector
Shaft mount, 5-26VDC, with 10 pin connector
1. * Marathon Motors stock item.
2. For additional information visit www.marathonelectric.com/motors/search.asp
Mitsubishi Electric Automation
|
Variable Frequency Drives 395
n VARIABLE FREQUENCY DRIVES
Blue MAX™ 2000 Vector Duty
2000:1 Constant Torque
Designed for inverter or vector duty applications where up to a 2000:1 constant torque speed range is required. Typical uses
include: material handling, machine tools, conveyors, crane & hoist, metal processing, test stands, pumps, compressors, textile
processing and other industrial machinery installed in dusty or dirty environments where cast iron construction is required.
• Class H MAX GUARD insulation system
• Constant torque operation from 0 to base speed on vector
drive, including TEFC (on V/Hz drives, TEFC motors are
limited to 20:1 Constant Torque)
• Constant horsepower to twice base speed (143-254 frame);
1.5 times base (all others)
• Continuous duty at 40°C ambient
• Optimized for operation with IGBT inverter (NEMA Design A)
• C-Face foot mount through 100 Hp as noted
• Class F N/C thermostats
•
•
•
•
•
•
•
•
Ball bearing (roller bearing available 360 frame and larger)
Cast iron frame and brackets
Patented “fracket” design (TEBC enclosure)
“B” temperature rise on Blower-Cooled motors
F1 standard, field reversible to F2
Encoder and brake provisions included on opposite drive end
UL recognized and CSA certified
Three year warranty
Totally Enclosed Rigid Base, and C-Face with Rigid Base
Hp
1
1 1/2
2
3
5
7 1/2
10
15
20
25
30
40
50
RPM
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1200
1800
1800
1200
1800
1800
1200
1800
1800
1200
1800
1800
1200
1800
1800
1200
Volts
230/460
230/460
230/460
230/460
230/460
230/460
230/460
230/460
230/460
230/460
230/460
230/460
230/460
230/460
230/460
230/460
230/460
230/460
230/460
230/460
230/460
230/460
230/460
230/460
230/460
230/460
230/460
Encl.
TENV
TENV
TENV
TENV
TENV
TEFC
TENV
TEFC
TENV
TEFC
TENV
TEBC
TEFC
TENV
TEBC
TEFC
TEBC
TEBC
TEFC
TEBC
TEBC
TEFC
TEBC
TEBC
TEFC
TEBC
TEBC
* Marathon Motors stock item.
Notes:
1. B: NEMA Design B.
2. For additional information visit www.marathonelectric.com/motors/search.asp
396
Frame
143TC
145TC
145TC
182TC
184TC
213TC
213TC
215TC
215TC
254TC
254TC
284TC
256TC
256TC
286TC
284T
284TC
324TC
286T
286TC
326TC
324T
324TC
364TC
326T
326TC
365TC
Catalog No.
Y525 *
Y590 *
Y526 *
Y527 *
Y564 *
Y595 *
Y565 *
Y596 *
Y566 *
Y597 *
Y509 *
Y395 *
Y598 *
Y510 *
Y582
Y569 *
Y511 *
Y583 *
Y570 *
Y512 *
Y584 *
Y571 *
Y513 *
Y585 *
Y572 *
Y514 *
Y586
F.L.A.
3.0/1.5
4.6/2.3
6.0/3.0
8.0/4.0
13.4/6.7
19.4/9.7
21.0/10.5
25.4/12.7
26.0/13.0
37.0/18.5
40.4/20.2
40.0/20.0
52.0/26.0
50.0/25.0
52.4/26.2
63.0/31.5
63.0/31.5
67.0/33.5
77.0/38.5
74.0/37.0
82.0/41.0
100/50.0
100/50.0
104/52.0
121/60.5
120/60.0
130/65.0
Weight
61
68
70
110
117
191
180
211
290
339
350
480
375
380
500
492
500
620
594
520
686
540
620
1050
540
640
1100
Notes
NEMA Design B
NEMA Design B
NEMA Design B
NEMA Design B
NEMA Design B
Totally Enclosed Rigid Base, and C-Face with Rigid Base (continued)
Hp
RPM
1800
1800
1200
1800
1800
1200
1800
1800
1200
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
60
75
100
125
150
200
250
300
350
Volts
230/460
230/460
230/460
230/460
230/460
230/460
230/460
230/460
230/460
460
460
460
460
460
460
460
460
460
460
460
Encl.
TEFC
TEBC
TEBC
TEFC
TEBC
TEBC
TEFC
TEBV
TEBC
TEFC
TEBC
TEFC
TEBC
TEFC
TEBC
TEFC
TEBC
TEFC
TEBC
TEBC
Frame
364T
364TC
404TC
365T
365TC
405TC
405T
405TC
444TC
444T
444T
445T
445T
445T
445T
449T
449T
449T
449T
449T
Catalog No.
Y573 *
Y515 *
Y587 *
Y574 *
Y516 *
Y588 *
Y575 *
Y517 *
Y589 *
Y576 *
Y518 *
Y577 *
Y519 *
Y578 *
Y520 *
Y579
Y531 *
Y580
Y532 *
Y533 *
F.L.A.
147/73.5
147/73.5
142/71.0
184/92.0
180/90.0
180/90.0
230/115
230/115
250/125
143
138
170
170
230
230
295
295
330
327
385
Weight
965
1062
1380
1006
1106
1450
1308
1429
2150
2062
2110
2246
2321
2404
2457
2800
2880
2890
2950
3075
Notes
NEMA Design B
NEMA Design B
20:1
* Marathon Motors stock item.
Notes:
1. B: NEMA Design B.
2. For additional information visit www.marathonelectric.com/motors/search.asp
Blue MAX™ 2000 Vector Duty / Encoders Through Mod Center
Encl.
Brand
Model
HS25A
HS35A
Avtron
HS35M
TENV
M3
M56
Dynapar
HS35
BEI
HS35
HS35A
Avtron
HS35M
M3
TEFC
Dynapar
HS35
BEI
HS35
HS35A
Avtron
HS35M
M56
TEBC
Dynapar
HS35
BEI
HS35
PPR
1024
2048
1024
2048
1024
2048
1024
1024
1024
2048
1024
2048
1024
2048
1024
2048
1024
1024
2048
1024
2048
1024
2048
1024
2048
1024
1024
2048
1024
2048
Catalog No.
A746*
A747*
A736*
A739*
A742*
A744
A753*
A793*
A772*
A776*
A779*
A780*
A737*
A740
A742*
A744
A754*
A774*
A777*
A783*
A784*
A738*
A741*
A743*
A745
A794*
A775*
A778*
A781*
A782*
A801*
Notes
Optical Hollow Shaft, MS connector
Optical Hollow Shaft, MS connector
Magnetic Hollow Shaft, EPIC connector
Optical Hollow Shaft, EPIC connector
Magnetic Modular Style, EPIC connector
Shaft mount, 5-26VDC, with 10 pin connector
Shaft mount, 5-26VDC, with 10 pin connector
Optical Hollow Shaft, MS connector
Magnetic Hollow Shaft, EPIC connector
Optical Hollow Shaft, EPIC connector
Shaft mount, 5-26VDC, with 10 pin connector
Shaft mount, 5-26VDC, with 10 pin connector
Optical Hollow Shaft, MS connector
Magnetic Hollow Shaft, EPIC connector
Magnetic Modular Style, EPIC connector
Shaft mount, 5-26VDC, with 10 pin connector
Shaft mount, 5-26VDC, with 10 pin connector
Encoder Conduit box
1. * Marathon Motors stock item.
2. For additional information visit www.marathonelectric.com/motors/search.asp
Mitsubishi Electric Automation
|
Variable Frequency Drives 397
398
n VARIABLE FREQUENCY DRIVES