2
1. Port LEDs
6. Power Control Buttons
3. Station ID LED
8. Reset Switch
2. Current LED
Power over the NET (PN9108 / PN9108U)
QUICK START GUIDE
®
© Copyright 2012 ATEN International Co., Ltd. www.aten.com
Altusen and the Altusen logo are trademarks of ATEN International Co., Ltd.
All rights reserved. All other trademarks are the property of their respective owners.
This product is RoHS compliant
PAPE-1214-B01G
Printing Date: 04/2012
Patent No.
CN ZL 200420007513.7
DE 202004005510.4
TW M253187
US 6909609
9. Link LED
5. Power LED
2 3
1
Technical Phone Support
International:
• 886-2-8692-6959
China:
• 86-10-5255-0110
Japan:
• 81-3-5615-5811
Korea:
• 82-2-467-6789
North America:
• 1-888-999-ATEN Ext: 4988
United Kingdom:
• 44-8-4481-58923
1
4 5
2
All information, documentation, and specifications contained in this media are subject to change without prior notification by the manufacturer.
Please visit our website to find the most up to date version.
5
6
1
Single Stage Installation
4. Use the AC power cord provided with this package to connect the PN9108’s Power
Socket to an AC power source.
5. Turn on the PN9108.
6. Turn on the computers.
7. Current Display Switch
4. 10/100 Mbps Data LED
Online Registration
International:
• http://support.aten.com
North America:
• http://www.aten-usa.com/product_registration
4-1
The PN9108 Unit ( Front View )
7
3
8 9
Package Contents
The complete package consists of:
• 1
• 1
PN9108 Station
PN9108 to AC Source Power Cord (1.8M)
• 8
Power Outlet Power Cords
3
The PN9108 Unit ( Rear View )
1. Power Socket
6. PON (Power over the NET) Output Port
3. AC Power Outlets
8. RJ-45 Port
2. Circuit Breaker
• 8
Safe Shutdown Cables
7. Power Switch
4. RS-232 Port
• 1
• 4
• 1
PON Cable (DB9 F to DB9 M)
Foot Pads
Rack mount kit
(Brackets and Philips Head Hex M3 x 8 Screws)
• 1 User Instructions
• 1 Software Disk
1
Power outlet cord : Connector should comply with the VDE 0625 or EN60320
specification. A minimum 10A, 0.75 mm2 x 3G power cord (H05VV-F or VW-1) should
be used.
Note:
Use the power cord supplied with this package. If you need to purchase additional
power cord, you must choose ones that comply with the above specifications.
3
4
5
6
Daisy Chaining Installation
To manage even more computers, up to 15 additional PN9108 Stations can be daisy
chained down from the top level unit. In this way, up to 128 computers can be managed
on a complete installation.
Note: In a daisy chained installation, a switch is the child of the switch above it, and the
parent of the switch below.
These instructions show how to install the PN9108 Power over the NET. For detailed
information, refer to the user manual included in the kit.
Power cord : The power source is a 220- 240 V AC supply, use a tandem (T blade) type
attachment plug with ground conductor power cord that meets the respective European
country's safety regulations, such as VDE for Germany. Plug should comply with the VDE
0620 specification; the connector should comply with the VDE 0625 specification. A
minimum 10A, 0.75 mm2 x 3G power cord (H05VV-F or VW-1) should be used.
2
5
9. PON Input Port
5. Safe Shutdown Ports
7
4
8
9
Single Stage Installation
1. For each computer, use an AC Output cable to connect from any available PN9108 output
port to the computer’s AC socket.
2. For Windows 98E, ME, NT, 2000, XP, and 2003 Server computers, for each computer
use a Safe Shutdown cable to connect from the PN9108’s Safe Shutdown port to the
computer’s Serial port.
3. Plug the LAN or WAN cable into the PN9108’s RJ-45 socket.
6
Rack Mounting
1. Separate the front and rear modules by removing the four module attaching screws.
7
Browser operation
The most convenient way to operate the PN9108 is with an internet browser.
To begin:
To ascertain and set an IP address for your device when it is assigned
automatically via DHCP:
• Run IPInstaller.exe (included in our software CD)
• Click "Enumerate" to refresh the Device List if
necessary
• Select the device
• Select "Obtain an IP address automatically
(DHCP)"
• Click "Set IP" and wait for the IP setting
procedure to finish
Note:
For security purposes, we strongly recommend you remove these and give yourself a
unique Username and Password with the appropriate Administrator permissions. This
setting can be found under "General" setting in the main screen.
2. Screw the rack mounting brackets into the front and rear modules.
8
Specifications
Function
If your installation uses fixed IP addresses, select " Specify an IP address", key in the
appropriate IP information for the IP address, Submask, and Gateway, then click " Set IP"
Power Characteristics
Power Inlet
8 x IEC 60320/C13 (F)
I/P Rating (Total input -max)
1. Open your browser and specify the IP address of the PN9108 you want to access in the
browser’s URL location bar.
2. A Security Alert dialog box appears. Accept the certificate. A login dialog box, like the one
below, appears:
PN9108G
100–240 VAC; 10A**
1 x IEC 60320/C14 (M)
Power Outlets
O/P Rating
PN9108A
100–240 VAC; 15A*
100–120 V AC; 50/60Hz; 12A
220–240 V AC; 50/60Hz; 10A
Per Port (max)
100–120 V AC; 50/60Hz; 9A
220–240 V AC; 50/60Hz; 9A
Total (max)
100–120 V AC; 50/60Hz; 11A
220–240 V AC; 50/60Hz; 9A
Outlet Power
8 (orange)
Remote Access
8 (green)
Link
LEDs
1 (green)
10/100 Mbps
1 (orange/green)
Power
1 (blue)
Current
3. Screw the mounting brackets to the rack.
Station ID
Connectors
1 (red)
2 x 7 segment (yellow)
PON In
1 x DB-9 (F)
PON Out
1 x DB-9 (M)
LAN
1 x RJ-45
RS-232
Switches
1 x DB-9 (M)
Safe Shutdown
8 x 6-pin Safe Shutdown Jacks (F)
Power
Outlet On / Off
Remote On / Off
Sta. ID Display
8 x Pushbutton
Reset
1 x Semi hidden
Power Consumption (no load)
Power Consumption (max. load)
1 x Rocker
1 x Pushbutton
120V; 60Hz; 16W
230V; 50Hz; 16W
120V; 60Hz; 1440W
230V; 50Hz; 2300W
Operating Temp.
Environment
Humidity
3. Provide a valid Username and Password (set by the PN9108 administrator), then Click Login
to continue.
If you are the administrator, and are logging in for the first time, use the default Username:
administrator; and the default Password: password.
After you have successfully logged in, the PN9108 Main Screen appears:
Physical
Properties
0 - 40˚C
Storage Temp.
-20 - 60˚C
0 - 80% RH, Non-condensing
Housing
Metal
Weight
4.2 kg
Dimensions
(L x W x H)
43.24 x 25.42 x 4.40 cm (19”/1U)
* Units are certified to 80% of max. current rating (100-120 VAC).
** Units are certified to 220-240 VAC.