Cables to Go 30534 Instruction manual

30534 Aldi PT+ES+DE+EN Final Cover.FH11 Wed Oct 20 09:36:00 2010
EN
Seite 3
C
M
Y
CM
MY
CY CMY
K
81,3 cm / 32" Design LCD-TV
with integrated HD DVB-T tuner
MEDION® LIFE®
P15038 (MD 30534)
ES
Medion Service Center
Visonic S.A.
c/ Miguel Faraday, 6
Parque Empresarial "La Carpetania", N-IV Km. 13
E-28906 Getafe, Madrid
España
Hotline: 902196437
Fax: 914604772
service-spain@medion.com
www.medion.es
I/01/11
PT
Schwarz
Medion Service Center
Visonic S.A.
c/ Miguel Faraday, 6
Parque Empresarial "La Carpetania", N-IV Km. 13
E-28906 Getafe, Madrid
Espanha
Hotline: 808 202 789
Fax: (+34) 91 460 4772
service-portugal@medion.com
www.medion.com/portugal
Instruction manual
Contents
Features ................................................................. 2
Introduction ............................................................. 2
Preparation ............................................................. 2
Safety Precautions ................................................. 3
Connection to a Television Distribution System
(Cable TV etc.) from Tuner ................................. 4
Licence Notification (optional)............................. 4
TRADEMARK ACKNOWLEDGMENT ................ 4
Package Contents .................................................. 4
Environmental Information ..................................... 5
Repair Information .......................................... 5
Remote Control Buttons ......................................... 6
LCD TV and Operating Buttons .............................. 7
Viewing the Back side Connections ....................... 7
Viewing the Connections - Side Connectors .......... 8
Power Connection .................................................. 8
Aerial Connection ............................................... 8
Using Digital Multimedia Connectors...................... 9
USB Memory Connection ................................... 9
Side HDMI Connection ........................................... 9
Connecting the LCD TV to a PC............................. 9
Connecting to a DVD Player................................. 10
Using Side AV Connectors ................................... 10
Using Other Connectors ....................................... 10
Remote Control Handset ...................................... 10
Inserting Batteries ............................................. 10
Switching On/Off....................................................11
To Switch the TV On ..........................................11
To Switch the TV Off ..........................................11
Digital Teletext (** for UK only) ..........................11
Analogue Teletext ..............................................11
Input Selection .......................................................11
Operation with the Buttons on the TV ................11
Volume Setting ...............................................11
Programme Selection ....................................11
Viewing Main Menu........................................11
AV Mode ........................................................11
Operation with the Remote Control ...................11
Volume Setting ...............................................11
Programme Selection (Previous or Next
Programme) .................................................. 12
Programme Selection (Direct Access) .......... 12
First Time Installation............................................ 13
Auto Tuning .......................................................... 14
Auto Channel Scan Menu Operation ................ 14
Manual Tuning ..................................................... 14
Digital Manual Search....................................... 14
Analogue Manual Search ................................. 14
Analog Fine Tune.............................................. 14
Clear Service List (*) ......................................... 14
Managing Stations: Channel List .......................... 15
Operating the Channel List ............................... 15
Moving a Channel ............................................. 15
Deleting a Channel ........................................... 15
Renaming a Channel ........................................ 15
Locking a Channel ............................................ 15
Managing Stations: Favourites ............................. 16
Button Functions ............................................... 16
Managing Stations: Sorting Channel List ............. 16
On-Screen Information ......................................... 16
Media Playback Using Media Browser ................. 16
Viewing Videos via USB .................................. 17
Viewing Photos via USB ................................... 17
Slideshow Options ............................................ 17
Playing Music via USB ..................................... 17
Media Browser Settings .................................... 18
Changing Image Size: Picture Formats ................ 18
Configuring Picture Settings ................................. 19
Operating Picture Settings Menu Items ............ 19
Picture Settings Menu Items ............................. 19
PC Picture Settings........................................... 20
Configuring Sound Settings .................................. 20
Operating Sound Settings Menu Items ............. 20
Sound Settings Menu Items.............................. 20
Configuring Your TV’s Settings ............................. 21
Operating Settings Menu Items ........................ 21
Settings Menu Items ......................................... 21
Using a Conditional Access Module ..................... 21
Viewing Conditional Access Menu (*) ............... 21
Configuring Language Preferences ...................... 22
Language Settings ............................................ 22
Parental Control.................................................... 22
Parental Settings Menu Operation (*) ............... 23
Timers ................................................................... 23
Setting Sleep Timer .......................................... 23
Setting Programme Timers ............................... 23
Configuring Date/Time Settings ............................ 24
Configuring Source Settings ................................. 24
Configuring Other Settings ................................... 24
Operation .......................................................... 24
Other Features ..................................................... 25
Teletext ................................................................. 26
Tips ....................................................................... 26
Appendix A: PC Input Typical Display Modes....... 27
Appendix B: AV and HDMI Signal Compatibility
(Input Signal Types).............................................. 27
Appendix C: Supported DVI Resolutions.............. 28
Appendix D: Supported File Formats for USB
Mode..................................................................... 28
Appendix E: Software Upgrade ............................ 29
Specifications ....................................................... 30
Digital Reception (DVB-T) .................................... 30
English - 1 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 1
27.10.2010 15:04:20
Introduction
Features
• Remote controlled colour LCD TV.
• Fully integrated Terrestrial digital TV (DVB-T MPEG2) (DVB-T- MPEG4).
• HDMI connectors for digital video and audio. This
connection is also designed to accept high definition
signals.
• USB input.
• 1000 programmes (analogue+digital).
• OSD menu system.
• Integrated tuner DVB-T HD, MPEG 2 / MPEG 4
compatible.
• Scart socket for external devices (such as video,
video games, audio set, etc.).
Please read the corresponding instructions of this
handbook prior to the first usage of the device, even
when the usage of electronic devices is familiar
to you. Notice especially the chapter SAFETY
PRECAUTIONS. Carefully keep the handbook as
future reference. When selling the device or giving it
away, absolutely give these direction for use.
Thank you for choosing this product. This manual will
guide you for the proper operation of your TV.
Before operating the TV, please read this
manual thoroughly. Please do keep this
manual in a safe place for future references.
This device is intended to receive and display TV
programs. The different connection options make
• Stereo sound system. (SRS TruSurround HD)
an additional expansion of the reception and display
• Teletext, fastext, TOP text.
sources possible (receiver, DVD player, DVD
recorder,
• Headphone connection.
VCR, PC etc.). This device is only suitable for the
operation in dry interiors. This appliance is intended
solely for private domestic use and may not be used
for industrial and commercial purposes. We exclude
liability in principle, if the device is not used as
intended, or unauthorized modifications have been
made. To operate your LCD TV in extreme ambient
conditions may cause the damage of the device.
• Automatic programming system.
• Forward or backward manual tuning.
• Sleep timer / Child lock.
• Automatic sound mute when no transmission.
• NTSC playback.
• AVL (Automatic Volume Limiting).
• Auto power down.
Preparation
• PLL (Frequency Search).
• PC input.
• Plug&Play for Windows 98, ME, 2000, XP, Vista,
Windows 7.
For ventilation, leave a free space of at least 10 cm
all around the set. To prevent any fault and unsafe
situations, please do not place any objects on top of
the set. Use this device in moderate climates.
• Game Mode
10 cm
10 cm
10 cm
English - 2 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 2
27.10.2010 15:04:20
Lightning
Safety Precautions
Read the following recommended safety
precautions carefully for your safety.
Power Source
The TV set should be operated only from a 220-240
V AC, 50 Hz outlet. Ensure that you select the correct
voltage setting for your convenience.
Power Cord
Do not place the set, a piece of furniture, etc. on the
power cord (mains lead) or pinch the cord. Handle the
power cord by the plug. Do not unplug the appliance by
pulling from the power cord and never touch the power
cord with wet hands as this could cause a short circuit or
electric shock. Never make a knot in the cord or tie it with
other cords. The power cords should be placed in such a
way that they are not likely to be stepped on. A damaged
power cord can cause fire or give you an electric shock.
When it is damaged and needs to be replaced, it should
be done by qualified personnel.
In case of storm and lightning or when
going on holiday, disconnect the power
cord from the wall outlet.
Replacement Parts
When replacement parts are required, make sure that
the service technician has used replacement parts,
which are specified by the manufacturer or have the
same specifications as the original one. Unauthorized
substitutions may result in fire, electrical shock or
other hazards.
Servicing
Please refer all servicing to qualified
personnel. Do not remove the cover
yourself as this may result in an electric
shock.
Waste Disposal
• Instructions for waste disposal:
Packaging and packaging aids are recyclable and
should principally be recycled. Packaging materials,
such as foil bag, must be kept away from children.
Batteries, including those which are heavy metal-free,
should not be disposed of with household waste.
Please dispose of used battery in an environment
friendly manner. Find out about the legal regulations
which apply in your area.
Moisture and Water
Do not use this device in a humid and
damp place (avoid the bathroom, the
sink in the kitchen, and near the washing
machine). Do not expose this device to
rain or water, as this may be dangerous
and do not place objects filled with
liquids, such as flower vases, on top.
Avoid from dripping or splashing.
If any solid object or liquid falls into the cabinet, unplug
the TV and have it checked by qualified personnel
before operating it any further.
Cleaning
Before cleaning, unplug the TV set
from the wall outlet. Do not use liquid
or aerosol cleaners. Use soft and dry
cloth.
Ventilation
The slots and openings on the TV set are intended for
ventilation and to ensure reliable operation. To prevent
overheating, these openings must not be blocked or
covered in anyway.
Heat and Flames
The set should not be placed near to
open flames and sources of intense heat
such as an electric heater. Ensure that
no open flame sources, such as lighted
candles, are placed on top of the TV. Batteries should
not be exposed to excessive heat such as sunshine,
fire or the like.
• Don’t try to recharge batteries. Danger of explosion.
Replace batteries only with the same or equivalent
type.
This symbol on the product or on its packaging means
that your electrical and electronic device should be
disposed at the end of its service life
separately from your household wastes.
There are separate collection systems for
recycling in EU. For more information, please
contact the local authority or the dealer where
you purchased the product.
Disconnecting the Device
The mains plug is used to disconnect TV set from
the mains and therefore it must remain readily
operable.
Headphone Volume
Excessive sound pressure from earphones
and headphones can cause hearing loss.
Installation
To prevent injury, this device must be securely
attached to the wall in accordance with the installation
instructions when mounted to the wall (if the option
is available).
English - 3 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 3
27.10.2010 15:04:20
LCD Screen
Licence Notification (optional)
The LCD panel is a very high technology product with
about a million thin film transistors, giving you fine
picture details. Occasionally, a few non-active pixels
may appear on the screen as a fixed blue, green or
red point. Please note that this does not affect the
performance of your product.
is a trademark of SRS Labs, Inc.
TruSurround technology is incorporated under license
from SRS Labs, Inc.
Warning! Do not leave your TV in standby or operating
mode when you leave your house.
Connection to a Television Distribution
System (Cable TV etc.) from Tuner
Device connected to the protective earthing of the
building installation through the mains connection or
through other apparatus with a connection to protective
earthing-and to a television distribution system using
coaxial cable, may in some circumstances create a
fire hazard.
Licence Notification (optional)
Manufactured under license from Dolby
Laboratories.
TRADEMARK ACKNOWLEDGMENT
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
Connection to a cable distribution system has
therefore to be provided through a device providing
electrical isolation below a certain frequency range
(galvanic isolator, see EN 60728-11).
Package Contents
SCREEN
ZOOM
The Standby / On button doesn´t separate this
device completely from mains. Moreover the device
consumes power in the standby operation. In order to
separate the device completely from mains, the mains
plug has to be pulled from the mains socket. Because
of that the device should be set up in a way, that an
unobstructed access to mains socket is guaranteed,
so that in case of emergency the mains plug can be
pulled immediately. To exclude the danger of fire, the
power cord should principally be separated from the
mains socket prior to a longer period of non-usage,
i.e. during vacations.
SUBTITLE
ROOT
TITLE
1
2
4
5
6
7
8
9
TEXT
0
3
LCD TV
SWAP
SOURCE
INFO
V+
P+
OK
Batteries: 2 X AAA
P-
VMENU
RETURN
FAV
SLEEP
EPG
SEARCH
MODE
DISPLAY
PRESETS
Instruction Book
Remote
Control
Electrical device not in the hands of children
Never let children use electrical device unsupervised.
Children can´t always recognize properly the
possible dangers. Batteries / accumulators can be
life threatening when swallowed. Store batteries
unreachable for small children. In case of swallowing
a battery medical aid has to be sought immediately.
Also keep the packaging foils away from children.
There is danger of suffocation.
LANG
REPEAT
Note: You should check the accessories after
purchasing. Make sure that each accessory is
included.
English - 4 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 4
27.10.2010 15:04:21
Environmental Information
• This television is designed to consume less energy to save environment.
You not only help to save the environment but also you can save money by reducing electricity bills thanks to the
energy efficiency feauture of this TV. To reduce energy consumption, you should take the following steps:
• You can use Power Save Mode setting, located in the Feature menu. If you set Power Save Mode as On,
the TV will switch to energy-saving mode and luminance level of TV set will be decreased to optimum level.
Note that some picture settings will be unavailable to be changed when the TV is in Power Save Mode.
• When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce
energy consumption.
• Disconnect power when going away for longer time.
• Note that annually, using the TV set in Power Save Mode has more power efficiency than disconnecting
the TV from the mains plug instead of keeping stand-by mode. Therefore disconnect the TV from the mains
plug to save energy when you do not use. However it is highly recommended to activate Power Save Mode
setting to reduce your annual power consumption.
• Please helps us to save environment by following these steps.
Repair Information
Please refer all servicing to qualified personnel. Only qualified personnel must repair the TV. Please contact
your local dealer, where you have purchased this TV for further information.
English - 5 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 5
27.10.2010 15:04:22
Remote Control Buttons
1. No function
2. Play (in Media Browser mode)
3. No function
4. Rapid reverse (in Media Browser mode)
5. No function
6. Mono/Stereo - Dual I-II / Current Language
7. Expand (in TXT mode) / Image size /
8. Green button
SCREEN
9. Red button / Zooms videos (in Media Browser
video mode)
10. Numeric buttons
11. Teletext / Mix
12. Info / Reveal (in TXT mode)
13. Programme Down - Page up / Programme Up Page down
14. Mute
ZOOM
LANG
ROOT
2
3
4
5
6
7
8
9
TEXT
0
SWAP
SOURCE
INFO
17. No function
18. No function
TITLE
1
15. Favourite mode selection
16. Exit (in DTV mode) / Return / Index page (in
TXT mode)
SUBTITLE
REPEAT
V+
P+
19. Exit USB menu
20. Picture mode selection / Changes picture mode
(in Media Browser video mode)
OK
21. Electronic Programme Guide
P-
22. Sleep timer
V-
23. Menu on/off
MENU
24. OK / Select / Hold (in TXT mode) / Channel List
25. Volume up / down
RETURN
FAV
SLEEP
EPG
SEARCH
MODE
DISPLAY
PRESETS
26. Navigation buttons
27. AV / Source
28. Previous programme
29. Blue buton
30. Yellow button: Active channel list
31. No function
32. Subtitle on-off / TXT subtitle (analogue TV
mode) / Subtitle (in Media Browser mode).
33. No function
34. Rapid advance (in Media Browser mode)
35. Stop (in Media Browser mode)
36. Pause (in Media Browser mode)
37. Standby
38. Operation LED light
English - 6 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 6
27.10.2010 15:04:22
LCD TV and Operating Buttons
FRONT and REAR VIEW
Control buttons VIEW
Control Buttons
1. Standby/On button
2. TV/AV button
3. Programme Up/Down buttons
4. Volume Up/Down buttons
Note: Press “
” and
buttons at the same time to view
main menu.
Viewing the Back side Connections
HDMI 3
1. SCART 2 inputs or outputs for external devices.
2. SCART 1 input or output for external devices. Connect the SCART cable between SCART socket on
TV and SCART socket on your external device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV
mode.
Note: To connect external device,please use to supplied scart connection cable .
3. Component Video Inputs (YPbPr) are used for connecting component video.
You can connect the component video and audio sockets with a device that has component output.
Connect the component video cables between the COMPONENT VIDEO INPUTS on on the TV and
the component video outputs of your device. While connecting, be sure that the letters on your TV, “Y”,
“Pb”, “Pr” correspond with your device’s connectors.
4. PC/YPbPr Audio Inputs are used for connecting audio signals of a PC or a device that connects to the
TV via YPbPr. Connect the PC audio cable between the AUDIO INPUTS on the TV and audio output
of your PC to enable PC audio. Connect the audio cable between AUDIO INPUTS on the TV and audio
outputs of your device to enable component audio.
English - 7 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 7
27.10.2010 15:04:22
5. SPDIF Coaxial Out outputs digital audio signals of the currently watched source.
Use an SPDIF coaxial cable to trasfer audio signals to a device that has SPDIF input
6. RF Input connects to an aerial antenna system.
Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device
to the television with an appropriate antenna cable, as shown in the illustration in the following pages.
7. PC Input is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.
8. HDMI 1: HDMI Input
HDMI Inputs are for connecting a device that has an HDMI socket. Your LCD TV is capable of
displaying High Definition pictures from devices such as a High Definition Satellite Receiver or DVD
Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets
can accept either 720p or 1080i signals. No sound connection is needed for an HDMI to HDMI
connection.
9. HDMI 2: HDMI Input
10. HDMI 3: HDMI Input
Viewing the Connections - Side Connectors
1. CI Slot is used for inserting a CI card. A CI card allows you to view all the
channels that you subscribe to. For more information, see “Conditional
Access” section.
2. Side USBs
3. Side HDMI Input is for connecting a device that has an HDMI socket.
4. Headphone jack is used for connecting an external headphone to the system.
Connect to the HEADPHONE jack to listen to the TV from headphones
(optional).
5Vdc-Max500mA
5. Video Input is used for connecting video signals of external devices.Connect the video
cable between the VIDEO IN socket on the TV and the VIDEO OUT jack on your device.
6. Audio Inputs are used for connecting audio signals of external devices. Connect the audio
cablebetweentheAUDIOINPUTSontheTVandtheAUDIOOUTPUTjacksonyourdevice.
Note: If you connect a device to the TV via the VIDEO INPUT, you should also connect
your device with an audio cable to the AUDIO INPUTS of the TV to enable audio.
7. Standby switch is used for turning the TV on or off.
Power Connection
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains. Plug the power cable to the mains socket outlet.
Aerial Connection
• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
HDMI 3
English - 8 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 8
27.10.2010 15:04:24
Using Digital Multimedia
Connectors
Connecting the LCD TV to a PC
• You can connect USB devices to your TV by using
the USB inputs of the TV. This feature allows you
to display/play JPG, MP3 and video files stored in
a USB stick.
• It is possible that certain types of USB devices (e.g.
MP3 Players) may not be compatible with this TV.
• You may back up your files before making any
connections to the TV set in order to avoid any
possible data loss. Note that manufacturer will not
be responsible for any file damage or data loss.
For displaying your computer’s screen image on your
LCD TV, you can connect your computer to the TV set.
Power off both computer and display before making
any connections. Use 15-pin D-sub display cable to
connect a PC to the LCD TV. When the connection
is made, switch to PC source. See “Input selection”
section. Set the resolution that suits your viewing
requirements. Resolution information can be found
in the appendix parts.
• Do not pull out USB module while playing a file.
USB MEMORY
PC Input
PC RGB cable
(not supplied)
to PC input
USB Memory Connection
Audio
Inputs
SIDE VIEW
PC audio cable
(not supplied)
to AUDIO INPUTS
on the TV
CAUTION: Quickly plugging and unplugging USB
devices, is a very hazardous operation. Especially,
do not repeatedly quickly plug and unplug the
drive. This may cause physical damage to the USB
player and especially the USB device itself.
IMPORTANT: The TV should be switched off while
plugging or unplugging a USB device. Plug your
USB device to the USB inputs of the TV. You can
connect two usb device to your TV by using the USB
inputs of the TV at the same time.
Note: It is possible certain types of hard disk drives
are not supported.
Side HDMI Connection
You can use side HDMI input to connect a device that
has an HDMI connector to your TV. Use an appropriate
HDMI cable to make such a connection. Note that you
should switch to the HDMI source to view the content
from the connected device. Power off both the TV and
the device before making any connections. Side HDMI
Input supports connections between HDMI devices
such as DVD players. You can use side HDMI input
of the TV to connect to an external HDMI device. Use
an HDMI cable to connect.
HDMI DEVICE
SIDE VIEW
English - 9 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 9
27.10.2010 15:04:26
Connecting to a DVD Player
If you want to connect a DVD player to your LCD
TV, you can use connectors of the TV set. DVD
players may have different connectors. Please refer
to your DVD player’s instruction book for additional
information. Power off both the TV and the device
before making any connections.
Note: Cables shown in the illustration are not
supplied.
Using Side AV Connectors
You can connect a range of optional equipment to
your LCD TV.
• For connecting a camcorder, connect to the VIDEO
IN socket and the AUDIO SOCKETS. Do not connect
the camcoder to VIDEO IN socket at the same time
since it can cause noise in the picture. For selecting
the related source, see the section “Input selection”
in the following parts.
• If your DVD player has an HDMI socket, you can
connect via HDMI. When you connect to DVD player
as illustrated below, switch to HDMI source. See,
“Input Selection” section.
• To listen the TV sound from headphones, connect
to the HEADPHONE jack of theTV.
• Most DVD players are connected through
COMPONENT SOCKETS. Use a component video
cable to connect video input. For enabling audio,
use a component audio cable as illustrated below.
When the connection is made, switch to YPbPr
source. See, “Input selection” section.
You can connect a range of optional equipment
to your LCD TV. Possible connections are shown
below. Note that cables shown in the illustration are
not supplied.
• You may also connect through the SCART 1 or
SCART 2. Use a SCART cable as shown below.
Using Other Connectors
• For connecting a to a device that has SPDIF support,
use an appropriate SPDIF cable to enable sound
connection.
External Speakers
Note: These three methods of connection perform the
same function but in different levels of quality. It is not
necessary to connect by all three methods.
HDMI
A device that
supports
SPDIF signal.
Scart sockets
Component
video
inputs
Component
audio
inputs
Remote Control Handset
HDMI
inputs
Inserting Batteries
• Remove the battery cover located on the back of
the handset by gently pulling backwards from the
indicated part.
DVD Player
• Insert two AAA/R3 or equivalent type batteries
inside.Observe the correct polarity (+/-) when
inserting batteries and replace the battery cover.
English - 10 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 10
27.10.2010 15:04:27
Note: Remove the battery from remote control
handset when it is not to be used for a long period.
Otherwise it can be damaged due to any leakage of
batteries. Remote range is approximately 7m/23ft.
• When you press the “ ” button again, the digital
teletext screen will be displayed.
Analogue Teletext
Use of teletext and its functions are identical to
the analogue text system. Please do refer to the
“TELETEXT” explanations.
Switching On/Off
To Switch the TV On
Input Selection
• Connect the power cord to the 220-240V AC 50 Hz.
” button to position “|” so the TV
• Switch the “
will switch to standby mode. Then the standby LED
lights up.
• To switch on the TV from standby mode either:
Once you have connected external systems to
your TV, you can switch to different input sources.
Press “SOURCE” button on your remote control
consecutively for directly changing sources.
• Press the “ ” button, P+ / P- or a numeric button on
the remote control.
• Press the -P/CH or P/CH+ touch button on the TV. The
TV will then switch on.
Note: If you switch on your TV via PROGRAMME UP/
DOWN buttons on the remote control or on the TV
set, the programme that you were watching last will be
reselected.
By either method the TV will switch on.
To Switch the TV Off
• Switch the “
” button to position 2 as illustrated,(
) so the TV will switch off. .
You can operate your TV using both the remote control
and onset buttons.
Operation with the Buttons on the TV
• To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched to standby mode,
standby LED can blink to indicate that features such as
Standby Search, Over Air Download or Timer is active.
The LED can also blink when you switch on the TV from
standby mode.
Volume Setting
• Press “
” button to decrease volume or “
” button to increase volume, so a volume level scale
(slider) will be displayed on the screen.
Programme Selection
Digital Teletext (** for UK only)
• Press “P/CH +” button to select the next programme or
“P/CH -” button to select the previous programme.
• Press the “
Viewing Main Menu
” button.
• The digital teletext information appears.
• Operate it with the coloured buttons, cursor buttons
and OK button.
The operation method may differ depending on the
contents of the digital teletext.
Follow the instructions displayed on digital teletext
screen.
• Press the “V+”/”V-” button at the same time to view
main menu. In the Main menu select sub-menu using
” or
“AV” button and set the sub-menu using “
” buttons. To learn the usage of the menus,
“
refer to the menu system sections.
AV Mode
• Press the “AV” button in the control panel on the TV
to switch between AV modes.
• When the “ ” button is pressed, the TV returns to
television broadcasting.
Operation with the Remote Control
• With digital terrestrial broadcasting (DVB-T), in
addition to digital teletext broadcasting together with
the normal broadcasting, there are also channels
with just digital teletext broadcasting.
• The remote control of your TV is designed to control
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
• The aspect ratio (picture shape) when watching
a channel with just digital teletext broadcasting is
the same as the aspect ratio of the picture viewed
previously.
Volume Setting
• Press “V+” button to increase the volume. Press “V-”
button to decrease the volume. A volume level scale
(slider) will be displayed on the screen.
English - 11 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 11
27.10.2010 15:04:27
Programme Selection (Previous or Next
Programme)
• Press “ P -” button to select the previous
programme.
• Press “P +” button to select the next programme.
Programme Selection (Direct Access)
• Press numeric buttons on the remote control to select
programmes between 0 and 9. The TV will switch
to the selected programme. To select programmes
between, press the numeric buttons consecutively.
When the pressing time is due for the second
numeric button, only the first digit programme will
be displayed. Press directly the programme number
to reselect single digit programmes.
Viewing Electronic Programme
Guide (EPG)
You can view the electronic programme guide (EPG)
to view information about available programmes.To
view the EPG menu please press EPG button on the
remote control.
• Press “ ”/“
channels.
”
buttons to navigate through
• Press “ ”/“ ” buttons to navigate through the
programme list.
Red button (Prev Time Slice): Displays the
programmes of previous time slice.
Green button (Next Time Slice): Displays the
programmes of the next time slice.
Yellow button (Prev Day): Displays the programmes
of previous day.
Blue button (Next day): Displays the programmes
of the next day.
Numeric buttons (Jump): Jumps to the preferred
channel directly via numeric buttons.
OK (Options): Displays programme options including
“Select Channel” option.
Text button (Filter): Views filtering options.
INFO (Details): Displays the programmes in detail.
• EPG menu displays available information on all
channels.
• Please note that event information is updated
automatically. If there are no event information
data available for channels, EPG will be displayed
with blanks.
Red button (Prev Day): Displays the programmes
of previous day.
Green button (Next day): Displays the programmes
of the next day.
OK (Options): Displays programme options including
“Select Channel” option.
INFO (Event Details): Displays the programmes in
detail.
Yellow button (Zoom): Expands programme
information.
Blue button (Filter): Views filtering options.
INFO (Details): Displays the programmes in detail.
Green button: Programme schedule will be listed
Numeric buttons (Jump): Jumps to the preferred
channel directly via numeric buttons.
Yellow button: Display EPG data in accordane with
timeline schedule
OK (Options): Displays programme options including
“Select Channel” option.
Blue button (Filter): Views filtering options.
Text (Search): Displays “Guide Search” menu.
SUBTTL: Press SUBTITLE button to view Select
Genre menu. Using this feature, you can search the
English - 12 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 12
27.10.2010 15:04:27
programme guide database in accordance with the
genre. Info available in the programme guide will
be searched and results matching your criteria will
be listed.
(Now) : Shows the current programme.
First Time Installation
IMPORTANT: Ensure that the aerial is connected
before switching on the TV for the first time
installation.
• When the TV is operated for the first time, installation
wizard will guide you through the process. First,
language selection screen will be displayed:
To select the “Yes” or “No” option, highlight the item by
using “ ” or “ ” buttons and press OK button.
Afterwards, the following OSD will be displayed on the
screen and the digital television will search for digital
terrestrial TV broadcasts
Note: You can press “M” button to cancel.
• Use “ ” or “ ” buttons to select your language
and press OK button to set selected language and
continue.
• After selecting the language, “Welcome!” screen will
be displayed, requiring you to set Country,Teletext
Language and Scan Encrypted options.
• After all the available stations are stored, Channel
List will be displayed on the screen. If you like the
sort channels, according to the LCN,please select
“Yes” and than press “OK”.
• Press OK button to quit channel list and watch TV.
• By pressing “ ” or “ ” button, select the country
you want to set and press “ ” button to highlight
Teletext Language option. Use “ ” or “ ” button
to select desired Teletext Language.
• Press “ ” button after setting Teletext Language
option. Scan Encrypted will be then highlighted.
You can set Scan Encrypted as Yes if you want to
scan coded stations.Afterwards select the desired
Teletext Language.
• Press OK button on the remote control to continue
and the following message will be displayed on the
screen:
English - 13 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 13
27.10.2010 15:04:28
Digital Manual Search
Auto Tuning
HINT: Auto tuning feature will help you to retune the TV
set in order to store new services or stations.
Press “MENU” button on the remote control and
select Installation by using “ ” or “ ” button. Press
OK button and the following menu screen will be
displayed.
Select Automatic Channel Scan by using “ ”/“ ”
button and press OK button. Automatic Channel Scan
options will be displayed. You can select Digital Aerial,
Analog or Digital Aerial-Analogue tuning using “ ”/“
” and OK buttons.
In manual channel scan, the number of the multiplex
or frequency are entered manually and only that
multiplex or frequency are searched for the channels.
After selecting search type as Digital, you can enter
the multiplex or frequency number using the numeric
buttons and press OK button to search.
Analogue Manual Search
Auto Channel Scan Menu Operation
Digital: Searches and stores aerial DVB stations.
Analogue: Searches and stores analog stations.
Full: Searches and stores both analog and aerial
DVB stations.
• Whenever you select an automatic search type and
press OK button, a confirmation screen will appear
on the screen. To start installation process, select
Yes, to cancel select No by using .“ ” or “ ” and
OK button.
• After auto channel scan type is set and selected
and confirmed, installation process will start and
progress bar will move along. Press “MENU” button
to cancel process. In such a case, located channels
are not stored.
Manual Tuning
HINT: This feature can be used for direct broadcast
entry.
• Select Manual Channel Scan from the Installation
menu by using “ ”/“ ” and OK buttons. Manual
Scan options screen will be displayed.
• Select the desired Search Type using “ ” or “
” button. Manual search options will change
accordingly. Use “ ”/“ ” button to highlight an item
and then press “ ” or “ ” button to set an option.
You can press “MENU” button to cancel.
After selecting search type as analogue, you can use
“ ”/“ ” button to highlight an item and then press “
” or “ ” button to set an option.
Enter the channel number or frequency using the
numeric buttons. You can then press OK button
to search. When the channel is located, any new
channels that are not on the list will be stored.
Analog Fine Tune
• Select Analog Fine Tune from the Installation menu
by using “ ” or “ ” and OK buttons. Analog fine tune
screen will be displayed. Analog Fine Tune feature
will not be available if there are no analog channels,
digital channels and external sources stored.
• Press OK button to proceed. Use “ ” or “ ” button
to set Fine Tune. When finished, press OK button
again.
Clear Service List (*)
(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
Use this setting to clear channels stored. Press “ ” or
“ ” button to select Clear Service List and then press
OK. The following OSD message will be displayed
on the screen:
English - 14 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 14
27.10.2010 15:04:28
will be displayed. Select Yes if you want to move the
channel and press OK.
• Press OK button to process. Selected channel is
now moved.
Deleting a Channel
Press OK to cancel. Select Yes by pressing “ ” or “ ”
button and press OK to delete all of the channels.
You can press GREEN button to tag/untag all
channels; YELLOW button to tag/untag channel.
Managing Stations: Channel List
• Select the channel that you want to delete and select
Delete option. Press OK button to continue.
The TV sorts all stored stations in the Channel List.
You can edit this channel list, set favourites or set
active stations to be listed by using the Channel List
options.
• A warning screen will appear. Select YES to delete,
select No to cancel. Press OK button to continue.
• Press “MENU” button to view main menu. Select
Channel List item by using “ ” or “ ” button. Press
OK to view menu contents.
• Select the channel that you want to rename and
select Edit Name option. Press OK button to
continue.
Renaming a Channel
• Pressing “ ” or “ ” button moves to the previous/
next character. Pressing “ ” or “ ” button toggles
the current character, i.e., ‘b’ character becomes ‘a’
by “ ” and ‘c’ by “ ”. Pressing the numeric buttons
‘0...9’ replaces the highlighted character with the
characters printed above the button one by one as
the button is pressed.
Select Edit Channel List to manage all stored
channels. Use “ ” or “ ” and OK buttons to select
Edit Channel List.
Operating the Channel List
• When finished, press OK button to save. Press
“MENU” to cancel.
Locking a Channel
You can press GREEN button to tag/untag all
channels; YELLOW button to tag/untag a single
channel.
• Select the channel that you want to lock and select
Lock option. Press OK button to continue.
• You will be asked to enter parental control PIN.
Default PIN is set as 0000. Enter the PIN number.
• Press “ ” or “ ” button to select the channel that
will be processed. Press “ ” or “ ” button to select
a function on Channel List menu.
• Press OK button when the desired channel is
highlighted to lock/unlock the channel. Lock symbol
will be displayed next to the selected channel.
• Use P+/P- buttons to move page up or down.
• Press BLUE button to view filtering options.
• Press “MENU” button to exit.
Moving a Channel
• First select the desired channel. Select Move option
in the channel list and press OK button.
• Edit Number screen will be displayed. Enter the
desired channel number by using the numeric
buttons on the remote control. If there is a previously
stored channel on that number, a warning screen
English - 15 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 15
27.10.2010 15:04:29
Managing Stations: Favourites
You can create a list of favourite programmes.
• Press “MENU” button to view main menu. Select
Channel List item by using “ ” or “ ” button. Press
OK to view menu contents.
On-Screen Information
You can press “INFO” button to display on-screen
information. Details of the station and current
programme will be displayed on the information
banner.
• Select Favourites to manage favourite list. Use “
”/“ ” and OK buttons to select Favourites.
• You can set various channels as favourites so that
only the favourite channels are navigated.
The information banner gives information on the
channel selected and the programmes on it. The name
of the channel is displayed, along with its channel
list number.
Hint: Not all channels broadcast the programme
data. If the name and time of the programme are not
available, then information banner will be displayed
with blanks.
If the selected channel is locked, you must enter the
correct four-digit numeric code to view the channel
(default code is 0000). “Enter PIN” will be displayed
on the screen in such a case:
• Select a channel by using “ ” or “ ” button. Press
OK button to add selected channel to favourites list.
Press OK button again to remove.
Button Functions
Media Playback Using Media
Browser
If the USB stick is not recognized after power off/on
or First Time Installation, first, plug the USB device
out and power off/on the TV set. Plug the USB device
in again.
• OK: Add/remove a station.
• YELLOW: Tag/untag a channel.
• GREEN: Tag/untag all channels.
To display Media Browser window, press either
“MENU” button on the remote control and then select
Media Browser by pressing “ ” or “ ” button. Press
OK button to continue. Media Browser menu options
will be displayed.
• BLUE: Displays filtering options.
Managing Stations: Sorting
Channel List
You can select broadcasts to be listed in the channel
list. To display specific types of broadcast, you should
use Active channel list setting.
Also, when you plug USB devices, media browser
screen will be displayed automatically:
Select Active channel list from the Channel list
menu by using “ ” or “ ” button. Press OK button
to continue.
You can play music, picture and video files from the
connected USB memory stick. Use “ ” or “ ” button
to select Videos, Photos, Music or Settings.
You can select a broadcast type option from the list
by using “ ” /“ ” and OK buttons.
You can connect two USB devices to your TV. If both
USB devices include music, picture or video files, USB
selection osd will be displayed on the screen. The
English - 16 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 16
27.10.2010 15:04:29
first USB device connected to the TV will be named
as USB Drive1.
Select a device by using “ ” or “ ” button and press
OK.
Viewing Videos via USB
Jump (Numeric buttons):Jump to selected file using
the numeric buttons.
OK: Views the selected picture in full screen.
Slideshow (
all images.
button): Starts the slideshow using
RED: Sorts files by date.
GREEN: Views images in thumbnails.
BLUE: Switch between music,photo,video and all
YELLOW: Change view style
Slideshow Options
When you select Videos from the main options,
available video files will be filtered and listed on this
screen. You can use “ ” or “ ” button to select a video
file and press OK button to play a video. If you select
a subtitle file and press OK button, you can select or
deselect that subtitle file. The following menu will be
displayed while playing a video file:
Pause (
button) : Pauses the slideshow.
Continue (
button) : Continues the slideshow.
Previous/Next (Left/Right buttons): Jumps to
previous or next file on slideshow.
Rotate (Up/Down buttons): Rotates the image using
up/down buttons.
Play (
button): Starts the video playback.
Stop (
button): Stops the video playback.
Pause (
button): Pause the video playback.
Rewind (
button): Goes backward.
Forward (
button): Goes forward.
Loop/Shuffle (GREEN button): Press once to disable
Loop. Press again to disable both Loop and Shuffle.
Press once more to enable only Shuffle. Press again
to enable all. You can follow the disabled functions
with the change of the icons.
RETURN (Exit): Back to file list.
INFO: Displays help screen.
Subtitle/Audio (LANG. button): Sets subtitle/Audio.
Playing Music via USB
Yellow: Opens subtitle time correction menu
When you select Music from the main options, available
audio files will be filtered and listed on this screen.
Press RETURN (Exit) button to switch back to
previous menu.
Viewing Photos via USB
When you select Photos from the main options,
available image files will be filtered and listed on this
screen.
English - 17 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 17
27.10.2010 15:04:29
0..9 (Numeric buttons): Jumps to the selected file.
Auto
Play This (OK button) : Plays the selected file.
When a WSS (Wide Screen Signalling) signal, which
shows the aspect ratio of the picture, is included in
the broadcast signal or the signal from an external
device, the TV automatically changes the ZOOM
mode according to the WSS signal.
Play ( button) : Plays all media files starting with
the selected one.
Stop (
Pause (
button) : Stops playback.
button) : Pauses the selected playback.
Previous/Next (Left/Right buttons) : Jumps to
previous or next file to play.
RED: Sorts files by Title,Artist or Album.
BLUE: Switch between music, photo, video and all
YELLOW : Change view style
Loop/Shuffle (GREEN button): Press once to disable
Loop. Press again to disable both Loop and Shuffle.
Press once more to enable only Shuffle. Press again
to enable all. You can follow the disabled functions
with the change of the icons.
• When the AUTO mode does not function correctly
due to poor WSS signal quality or when you want to
change the ZOOM mode, change to another ZOOM
mode manually.
16:9
This uniformly stretches the left and right sides of a
normal picture (4:3 aspect ratio) to fill the wide TV
screen.
Media Browser Settings
• For 16:9 aspect ratio pictures that have been
squeezed into a normal picture (4:3 aspect ratio),
use the 16:9 mode to restore the picture to its
original shape.
Subtitle
This zooms up the wide picture (16:9 aspect ratio)
with subtitles to the full screen.
You can set your Media Browser preferences by
using the Settings dialog. Press “ ” or “ ” button to
highlight an item and use “ ” or “ ” button to set.
View Style: Sets default browsing mode.
Slide Show Interval: Sets slide show interval time.
Show Subtitle: Sets subtitle enabling preference.
Subtitle Position: Sets subtitle position as up or
down.
Subtitle Font Size: Sets subtitle font size (max.
54pt).
Changing Image Size: Picture
Formats
Note: You can shift to screen up or down by pressing
“ ” / “ ” buttons while picture zoom is selected as
panaromic, 14:9 Zoom, Cinema or Subtitle.
14:9
• Programmes can be watched in different picture
formats, depending on the transmission received.
This zooms up the wide picture (14:9 aspect ratio) to
the upper and lower limits of the screen.
• You can change the aspect ratio (image size) of
the TV for viewing the picture in different zoom
modes.
• Press “SCREEN” button repeatedly to change
the image size. Available zoom modes are listed
below.
English - 18 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 18
27.10.2010 15:04:30
14:9 Zoom
Configuring Picture Settings
You can use different picture settings in detail.
Press “MENU” button and select the Picture icon
by using “ ” or “ ” button. Press OK button to view
Picture Settings menu.
This option zooms to the 14:9 picture.
4:3
Use to view a normal picture (4:3 aspect ratio) as this
is its original size.
Operating Picture Settings Menu Items
Panoramic
• Press “ ” or “ ” button to highlight a menu item.
This stretches the left and right sides of a normal
picture (4:3 aspect ratio) to fill the screen, without
making the picture appear unnatural.
• Use “ ” or “ ” button to set an item.
• Press “MENU” button to exit.
Picture Settings Menu Items
Mode: For your viewing requirements, you can set
the related mode option. Picture mode can be set
to one of these options: Cinema,Game,Dynamic
and Natural.
Contrast: Sets the lightness and darkness values
of the screen.
The top and bottom of the picture are slightly cut off.
Brightness: Sets the brightness value for the
screen.
Cinema
Sharpness: Sets the sharpness value for the objects
displayed on the screen.
This zooms up the wide picture (16:9 aspect ratio) to
the full screen.
Colour: Sets the colour value, adjusting the colors.
Colour Shift: Adjust the desired colour tone.
Hue (NTSC only): Adjusts the colour value.
Colour Temp: Sets the desired colour tone.
Setting Cool option gives white colours a slight blue
stress.
For normal colours, select Normal option.
Setting Warm option gives white colours a slight red
stress.
Noise Reduction: If the broadcast signal is weak and
the picture is noisy, use Noise Reduction setting to
reduce the noise amount. Noise Reduction can be set
to one of these options: Low, Medium, High or Off.
English - 19 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 19
27.10.2010 15:04:30
Game Mode: When Game Mode is set to On, specific
game mode settings, which are optimized for better
video quality, will be loaded.
Press “MENU” button and select the Sound icon
by using “ ” or “ ” button. Press OK button to view
Sound Settings menu.
Note: When Game Mode is on, some items in the
Picture Settings menu will be unavailable to be set.
Picture Zoom:Sets the picture size to Auto,16:9,
Subtitle,14:9, 14:9 Zoom, 4:3, Panoramic or Cinema.
Reset: Resets the picture settings to factory default
settings.
While in VGA (PC) mode, some items in Picture menu
will be unavailable. Instead, VGA mode settings will be
added to the Picture Settings while in PC mode.
PC Picture Settings
For adjusting PC picture items, do the following:
Press “ ” or “ ” button to select Picture icon. Picture
menu appears on the screen.
Contrast, Brightness, Colour, Colour Temp and
Picture Zoom settings in this menu are identical to
settings defined in TV picture menu under “Main Menu
System”.
Operating Sound Settings Menu Items
Sound,Settings and Source settings are identical to
the settings explained in main menu system.
• Press “MENU” button to exit.
PC Position: Select this to display PC position
menu items.
• Press “ ” or “ ” button to highlight a menu item.
• Use “ ” or “ ” button to set an item.
Sound Settings Menu Items
Volume: Adjusts volume level.
Equalizer: Press OK button to view equalizer submenu.
Autoposition: Automatically optimizes the display.
Press OK to optimize.
H Position: This item shifts the image horizontally to
right hand side or left hand side of the screen.
V Position: This item shifts the image vertically
towards the top or bottom of the screen.
Dot Clock: Dot Clock adjustments correct the
interference that appear as vertical banding in
dot intensive presentations like spreadsheets or
paragraphs or text in smaller fonts.
Phase: Depending on the resolution and scan
frequency that you input to the TV set, you may see
a hazy or noisy picture on the screen. In such a case
you can use this item to get a clear picture by trial
and error method.
In equalizer menu, the preset can be changed to
Music, Movie, Speech, Flat, Classic and User. Press
the “M” button to return to the previous menu.
Note: Equalizer menu settings can be changed
manually only when the Equalizer Mode is in User.
Balance: This setting is used for emphasizing left or
right speaker balance.
Headphone: Sets headphone volume.
AVL: Automatic Volume Limiting (AVL) function sets the
sound to obtain fixed output level between programmes
(For instance, volume level of advertisements tend to
be louder than programmes).
Dynamic Bass: Dynamic Bass is used to increase
bass effect of the TV set.
Configuring Sound Settings
Sound settings can be configured according to your
personal preferences.
English - 20 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 20
27.10.2010 15:04:31
SRS TruSurround HD: By pressing “ ” or “ ” select
SRS TruSurround HD. Press “ ” or “ ” button to
set SRS TruSurround HD as on or off.
Using a Conditional Access
Module
Note: If you set SRS TruSurr HD as On, some features
in the Sound menu can be unavailable to be set.
IMPORTANT: Insert or remove the CI module only
when the TV is SWITCHED OFF.
Digital Out: Sets digital out audio type.
• In order to watch certain digital channels, a
conditional access module (CAM) can be necessary.
This module must be inserted in the CI slot of your
TV.
Configuring Your TV’s Settings
Detailed settings can be configured to suit your
personal preferences.
Press “MENU” button and select Settings icon by
using “ ” or “ ” button. Press OK button to view
Settings menu.
• Obtain the Conditional Access Module (CAM) and
the viewing card by subscribing to a pay channel
company, then insert those to the TV using the
following procedure.
• Insert the CAM and then the viewing card to the
slot that is located in the terminal cover at the rear
side of the TV.
• The CAM should be correctly inserted, it is
impossible to insert fully if reversed. The CAM or
the TV terminal may be damaged if the CAM is
forcefully inserted.
Connect the TV to the mains supply, switch on
and then wait for few moments until the card is
activated.
• When no module is inserted, “ No Common
Interface module detected” message appears on
the screen.
Operating Settings Menu Items
• Press “ ” or “ ” button to highlight a menu item.
• Press OK button to select an item.
• Refer to the module instruction manual for details
of the settings.
Viewing Conditional Access Menu (*)
(*) These menu settings may change depending on
the service provider.
• Press “MENU” button to exit.
Settings Menu Items
Conditional Access: Controls conditional access
modules when available.
Language: Configures language settings.
Press “MENU” button and select the icon by using
“ ” or “ ” button. Press OK button to view Settings
menu. Use “ ” or “ ” button to highlight Conditional
Access and press OK to view menu items.
Parental: Configures parental settings.
Timers: Sets timers for selected programmes.
Date/Time: Sets date and time.
Sources: Enables or disables selected source
options.
Other Settings: Displays other setting options of
the TV set.
English - 21 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 21
27.10.2010 15:04:31
Language Settings
Configuring Language
Preferences
You can operate the TV’s language settings using
this menu.
Press “MENU” button and select the Settings icon
by using “ ” or “ ” button. Press OK button to view
Settings menu. Use “ ” or “ ” button to highlight
Language and press OK to continue:
In the configuration menu, highlight the Language
Settings item by pressing “ ” or “ ” buttons. Press
OK and Language Settings submenu will be displayed
on the screen:
Use “ ” or “ ” button to set an item. Settings are
stored automatically.
Menu: displays the system language.
Use “ ” or “ ” buttons to highlight the menu item
that will be adjusted and then press “ ” or “ ” button
to set.
Notes:
Preferred
• System Language determines the on-screen menu
language.
These settings will be used if available. Otherwise the
current settings will be used.
• Audio Language is used for selecting the soundtrack
of a channels.
• Audio: Sets the preferred audio language.
• Primary settings are the first priority when multiple
choices are available on a broadcast. Secondary
settings are the alternatives when the first options
are not available.
• Subtitle : Sets the subtitle language. Selected
language will be seen in subtitles.
• Teletext: Sets teletext language.
Parental Control
• Guide: Sets the preferred Guide language.
Current (*)
(*) These settings can be changed if only the
broadcaster supports. Otherwise, settings will not be
available to be changed.
• Audio: Changes the audio language for the current
channel.
• Subtitle: Sets the subtitle language for the current
channel.
To prohibit viewing of certain programmes, channels
and menus can be locked by using the parental
control system.
This function enables or disables the menu protection
system and allows the PIN code to be changed.
Press “MENU” button and select the Settings by using
“ ” or “ ” button. Press OK button to view Settings
menu. Use “ ” or “ ” button to highlight Parental
and press OK to continue:
Note: If the Country option is set to Denmark, Sweden,
Norway or Finland, the Language Settings menu will
function as described below:
To display parental lock menu options, PIN number
should be entered. Factory default PIN number is
0000. After coding the correct PIN number, parental
settings menu will be displayed:
English - 22 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 22
27.10.2010 15:04:31
Timers
To view Timers menu, press “MENU” button and select
Settings icon by using “ ” or “ ” button. Press OK button
to view Settings menu. Use “ ” or “ ” button to highlight
Timers and press OK to continue:
Setting Sleep Timer
This setting is used for setting the TV to turn off after
a certain time.
• Highlight Sleep Timer by using “ ” or “ ” button.
• Use “ ” or “ ” button to set. The timer can be
programmed between Off and 2.00 hours (120
minutes) in steps of 30 minutes.
Parental Settings Menu Operation (*)
• Select an item by using “ ” or “ ” button.
Setting Programme Timers
• Use “ ” or “ ” button to set an item.
• Press OK button to view more options.
You can set programme timers for a particular
programme using this feature.
(*) If you set Country option as UK in the first time
installation, Maturity Lock and Child Lock options
will not be visible. This setting is available only for
EU countries.
Press “ ” button to set timers on an event. Programme
timer function buttons will be displayed on the
screen.
Menu Lock: Menu lock setting enables or disables
the menu access. You can disable access to the
installation menu or the whole menu system.
Maturity Lock(optional): When set, this option gets
the maturity information from the broadcast and if
this maturity level is disabled, disables access to the
broadcast.
Child Lock (optional): When Child Lock is set, the
TV can only be controlled by the remote control. In
this case the control panel buttons will not work,
except for the Standby/On button. When Child Lock
is activated you are able to switch the TV into Standby
mode with the Standby/On button. To switch the TV
on again, you need the remote control. Hence, if one
of those buttons is pressed, Child Lock Is On will
be displayed on the screen when the menu screen
is not visible.
Set PIN: Defines a new PIN number. Use numeric
buttons to enter a new pin number. You will need
to code your new pin a second time for verification
purposes.
IMPORTANT: The factory default pin number is 0000,
if you change the pin number make sure you write it
down and keep it safe.
Adding a Timer
• Press YELLOW button on the remote control to
add a timer. The following menu appears on the
screen:
Channel: Changes channel by using “ ” or “ ”.
Timer Type: This feature is unavailable to be set.
Date: Enter a date using the numeric buttons.
Start: Enter a starting time using the numeric
buttons.
End: Enter an ending time using the numeric
buttons.
Duration: Displays duration between the starting and
ending time.
Mode: Sets a timer to be repeated as Once, Daily or
Weekly. Use “ ” or “ ” buttons to select an option.
• Press GREEN button to save the timer. Press RED
button to cancel.
Change/Delete:Controls parental settings on timers.
Editing a Timer
• Select the timer you want to edit by pressing “ ”
or “ ” button.
• Press GREEN button. Edit Timer menu screen will
be displayed.
• When finished with editing, press GREEN button to
save. You can press “MENU” button to cancel.
Deleting a Timer
• Select the timer you want to delete by pressing “
” or “ ” button.
• Press RED button.
• Select YES by using “ ” or “ ” buttons to delete the
timer. Select NO to cancel.
English - 23 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 23
27.10.2010 15:04:32
Configuring Date/Time Settings
Select Date/Time in the Settings menu to configure
Date/Time settings. Press OK button.
• Select Sources in the Settings menu and press
OK button.
• Press“ ” or “ ” buttons to select a source.
• Use “ ” or “ ” button to enable or disable the selected
source. Changes are automatically stored.
Configuring Other Settings
To view general configuration preferences, select
Other Settings in the Settings menu and press OK
button.
• Use “ ” or “ ” buttons to highlight Date/Time.
Date,Time,Time Settings Mode and Time Zone Setting
will be available.
Use “ ” or “ ” buttons to highlight the Time Settings
Mode. Time Settings Mode is set using “ ” or “ ”
buttons. It can be set to AUTO or MANUAL.
When AUTO is selected, Date/Time and Time Zone
options will not be available to be set. If MANUAL
option is selected as the Time Zone can be altered:
• By pressing “ ” or “ ” buttons select Time Zone.
Operation
Use “ ” or “ ” buttons to change the Time Zone
between GMT-12 or GMT+12. Date/Time on the top
of the menu list will then change according to the
selected Time Zone.
• Press “ ” or “ ” buttons to select an item.
• Changes are automatically stored. Press “MENU”
to exit.
Configuring Source Settings
You can enables or disable selected source options.
The TV will not switch to the disabled source options
when “SOURCE” button is pressed.
• Use “ ” or “ ” button to set an option.
• Press OK button to view a sub-menu.
Menu Timeout: Changes timeout duration for menu
screens.
Scan Encrypted: When this setting is on, search
process will locate the encrypted channels as well. If
it is set as Off, encrypted channels will not be located
in automatic search or manual search.
Backlight (optional): This setting controls the
backlight level and it can be set to Maximum,
Minimum, Medium and Eco Mode (optional).
Power Save Mode : Use “ ” or “ ” button to select
Power Save Mode. Press “ ” or “ ” button to set
Power Save Mode as On or Off. See the section,
“Environmental Information” in this manual for further
information on Power Save Mode.
Note : Backlight function will be invisible if Power Save
Mode is set to on.
Blue Background: Activates or deactivates blue
background system when the signal is weak or
absent.
Software Upgrade: To ensure that your TV always
has the most update information, you can use this
setting. In order for the proper operation, please
ensure that the TV is set to standby mode.
English - 24 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 24
27.10.2010 15:04:32
Other Features
You can enable or disable automatic upgrade by
setting Automatic Scanning option.
You can manually search for new software by
selecting Scan for upgrade.
Hard of Hearing: If the broadcaster enables any
special signal concerning the audio, you can set this
setting as On to receive such signals.
Audio Description: Audio description refers to
an additional narration track for blind and visually
impaired viewers of visual media, including television
and movies. The description narrator talks through
the presentation, describing what is happening on the
screen during the natural pauses in the audio (and
sometimes during dialogue, if deemed necessary).
You can use this feature, only if the broadcaster
supports that additional narration track.
Auto TV Off: You can set the timeout value of auto off
feature.After the timeout value is reached and the Tv is
not operated for selected time , the TV will go off.
Displaying TV Information: Programme Number,
Programme Name, Sound Indicator, time, teletext,
channel type and resolution information is displayed
on the screen when a new programme is entered or
“INFO” button is pressed.
Mute Function: Press “ ” button to disable sound.
Mute indicator will be displayed in the upper side of
the screen. To cancel mute, there are two alternatives;
the first one is pressing the “ ” button and the second
one is increasing the volume level.
Picture Mode Selection: By pressing PRESETS
button, you can change Picture Mode settings in
accordance with your viewing requirements. Available
options are Dynamic, Natural, Cinema and Game.
Displaying Subtitles: You can enable subtitles by
pressing the SUBTITLE button of the remote control.
Press SUBTITLE button again to disable subtitle
function.
If “Subtitle” is On, pressing the “ ” button causes the
following warning message display on the screen (**
for UK only).
Broadcast Type (optional) :
When you set the desired broadcast type by using “
” or “ ” button, the TV will display the related channel
list. If the related source has does not include any
stored channels, “No channels for this type have been
found.” message will be displayed on the screen.
Standby Search (optional)
Use “ ” or “ ” button to select Standby Search and
then press “ ” or “ ” button to set this setting as On or
Off. If you change Standby Search to Off, this function
will be unavailable.To use Standby search please
make sure that you select Standby Search as On.
English - 25 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 25
27.10.2010 15:04:33
Teletext
Tips
Teletext system transmits information such as news,
sports and weather on your TV. Note that is the signal
degrades, for example in poor/adverse weather
conditions, some text errors may occur or the teletext
mode may be aborted.
Teletext function buttons are listed below:
Screen Care: Clean the screen with a slightly damp,
soft cloth. Do not use abrasive solvents as they may
damage the coating layer of the TV screen. For your
safety, unplug the mains plug when cleaning the
set. When moving the TV, hold it properly from the
bottom part.
“
” Teletext / Mix : Activates teletext mode when
pressed once. Press again to place the teletext screen
over the programme (mix).Pressing again will quit the
teletext mode.
Image Persistence: Please note that ghosting may
occur while displaying a persistent image.LCD TVs’
image persistence may disappear after a short time.
Try turning off the TV for a while.
“RETURN” Index: Selects the teletext index page.
To avoid this, do not leave the screen in still picture
for extended periods.
“INFO” Reveal: Shows hidden information (e.g.
solutions of games).
“OK” Hold: Holds a text page when convenient. Press
again to resume.
“ ”/“ ” Subcode Pages : Selects subcode pages if
available when the teletext is activated.
P+ / P- and numbers (0-9): Press to select a page.
Note: Most TV stations use code 100 for their index
pages.
Coloured Buttons (RED/GREEN/YELLOW/
BLUE)
Your TV supports both FASTEXT and TOP text
systems. When these systems are available, the
pages are divided into groups or topics. When
FASTEXT system is available, sections in a teletext
page will become colour-coded and can be selected
by pressing the coloured buttons. Press a coloured
button that corresponds to with your needs. The
coloured writings will appear, showing you which
coloured buttons to use when TOP text transmission
is present. Pressing “ ” or “ ” commands will request
the next or previous page respectively.
No Power: If your TV system has no power, please
check the main power cable and connection to the
mains socket outlet.
Poor Picture: Have you selected the correct TV
system? Is your TV set or house aerial located too close
to a non-earthed audio equipment or neon lights, etc.?
Mountains or high buildings can cause double pictures
or ghost images. Sometimes you can improve the
picture quality by changing the direction of the aerial.
Is the picture or teletext unrecognisable? Check if you
have entered the correct frequency. Please retune the
channels. The picture quality may degrade when two
peripherals are connected to the TV at the same time.
In such a case, disconnect one of the peripherals.
No Picture: Is the aerial connected properly? Are the
plugs connected tightly to the aerial socket? Is the
aerial cable damaged? Are suitable plugs used to
connect the aerial? If you are in doubt, consult your
dealer. No Picture means that your TV is not receiving
a transmission. Have you selected the correct button
on the remote control? Try once more. Also make sure
the correct input source has been selected.
Sound: You can not hear any sound. Did you perhaps
button? Sound is
interrupt the sound, pressing the
coming from only one of the speakers. Is the balance
set to one extreme? See Sound Menu.
Remote Control: Your TV no longer responds to the
remote control. Perhaps the batteries are exhausted.
If so you can still use the local buttons on the TV.
Input Sources: If you cannot select an input source,
it is possible that no device is connected. Check
the AV cables and connections if you have tried to
connect a device
English - 26 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 26
27.10.2010 15:04:34
Appendix A: PC Input Typical
Display Modes
Appendix B: AV and HDMI Signal
Compatibility (Input Signal Types)
The display has a maximum resolution of 1360 x 768.
The following table is an illustration of some of the
typical video display modes. Your TV may not support
different resolutions. Supported resolution modes are
listed below. If you switch your PC to an unsupported
mode, a warning OSD will appear on the screen.
Source
EXT-1
(SCART-1)
Supported Signals
Available
PAL 50/60
O
NTSC 60
O
RGB 50
O
RGB 60
O
PAL 50/60
O
NTSC 60
O
RGB 50
X
Index
Resolution
Frequency
1
640x400
70 Hz
2
640x480
60 Hz
3
640x480
75 Hz
RGB 60
X
4
800x600
60 Hz
PAL 50/60
O
5
800x600
75 Hz
6
1024x768
60 Hz
480I
60Hz
O
7
1024x768
70 Hz
480P
60Hz
O
8
1024x768
75 Hz
576I
50Hz
O
9
1152x864
75 Hz
576P
50Hz
O
10
1280x768
60 Hz
720P
50Hz
O
60 Hz
720P
60Hz
O
60 Hz
1080I
50Hz
O
11
12
1280x1024
1360x768
EXT-2
(SCART-2)
SIDE AV
YPbPr
HDMI1
HDMI2
HDMI3
HDMI4
NTSC 60
O
1080I
60Hz
O
1080P
50Hz
O
1080P
60Hz
O
480I
60Hz
O
480P
60Hz
O
576I
50Hz
O
576P
50Hz
O
720P
50Hz
O
720P
60Hz
O
1080I
50Hz
O
1080I
60Hz
O
1080P
50Hz
O
1080P
60Hz
O
1080P
24 HZ
O
(X: Not Available, O: Available)
In some cases a signal on the LCD TV may not be displayed
properly. The problem may be an inconsistency with standards
from the source equipment (DVD, Set-top box, etc. ). If you
do experience such a problem please contact your dealer and
also the manufacturer of the source equipment.
English - 27 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 27
27.10.2010 15:04:34
Appendix C: Supported DVI Resolutions
When connecting devices to your TV’s connectors by using DVI converter cables (not supplied), you can refer
to the following resolution information.
24Hz
25Hz
30Hz
50Hz
60Hz
;
480i
;
480p
576i
;
576p
;
720p
;
;
1080i
;
;
;
;
1080p
;
;
;
Appendix D: Supported File Formats for USB Mode
Supported Players
Player
Stream
Video Decoder (MSVD)
Audio Decoder (MSAD)
Audio
MP3
None
MP3
Audio
WAV/AIFF
None--
LPCM
WMA / ASF
VC1
WMA
MPEG1 Program
Stream
MPEG-1
MPEG1
MP3, AC-3 and PCM
MPEG2 Program
Stream
MPEG-2
MPEG2
MP3, AC-3 and PCM
MPEG4
MPEG-4/H264 in MP4
container
H264 and MPEG4
AAC
AVI (Xvid)
XVID
MPEG4
MP3, AC-3 and PCM
Windows Media
(optional)
English - 28 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 28
27.10.2010 15:04:34
Appendix E: Software Upgrade
• Your TV is capable of finding and updating new software upgrades over broadcast channels.
• For broadcast channels search, TV looks the available channels stored in your settings. So before software
upgrade search, it is advised to auto search and update all available channels.
1) Software upgrade search via user interface
• It is possible manually to check if there is a new software upgrade for your TV set.
• Simply navigate on your main menu. Choose Settings and select Other Settings menu. In Other Settings
menu navigate on to the Software Upgrade item and press OK button to open Upgrade Options menu.
• In Upgrade Options menu select Scan for upgrade and press OK button.
• If a new upgrade is found, it starts to download the upgrade. A progress bar indicates the remaining download
progress. When download completes with success a message is displayed for reboot to activate new software.
Press OK to continue with the reboot operation.
2) 3.AM search and upgrade mode
• If Automatic scanning in Upgrade Options menu is enabled, TV wakes up at 03:00 and searches broadcast
channels for new software upgrade. If new software is found and downloaded successfully, with next power
up TV opens with new software version.
Note on reboot operation: Reboot is the last step in software upgrade operation if download of new software is
finished successfully. During reboot TV makes final initializations. In reboot sequence panel power is closed and
front led indicates the activity with blinking. Around 5 minutes later TV restarts with new software activated.
• If your TV fails to restart in 10 minutes, unplug power for 10 minutes and re-plug again. TV should open with
new software safely. If you still can not get TV working, please kindly repeat unplug and plug sequence a few
times more. If your set still can not operate, please call the service personnel to fix the problem for you.
Caution: While led is blinking during reboot do not unplug your TV’s power. Doing this may cause
your TV not to re-open again and can only be fixed by service personnel.
Information for Users on Disposal of Old Equipment and
Batteries
[European Union only]
These symbols indicate that equipment with these symbols should not
be disposed of as general household waste. If you want to dispose
of the product or battery, please consider the collection systems or
facilities for appropriate recycling.
Battery
Products
Notice: The sign Pb below the symbol for batteries indicates that
this battery contains lead.
English - 29 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 29
27.10.2010 15:04:34
Specifications
Digital Reception (DVB-T)
TV BROADCASTING
Transmission Standards:
PAL/SECAM B/G D/K K’ I/I’ L/L’
DVB-T, MPEG2, DVB-T, MPEG4 HD
RECEIVING CHANNELS
i. DEMODULATION
VHF (BAND I/III)
• -Symbol rate: COFDM with 2K/8K FFT mode.
UHF (BAND U)
• -Modulation: 16-QAM - 64-QAM FEC for all DVB
modes (automatically found)
HYPERBAND
NUMBER OF PRESET CHANNELS
1000
CHANNEL INDICATOR
On Screen Display
RF AERIAL INPUT
75 Ohm (unbalanced)
OPERATING VOLTAGE
220-240V AC, 50 Hz.
AUDIO
SRS TruSurround HD
AUDIO OUTPUT POWER (WRMS.) (10% THD)
• MHEG-5 ENGINE compliant with ISO/IEC 13522-5
UK engine Profile (UK only)
• Object carousel support compliant with ISO/IEC
135818-6 and UK DTT profile(UK only)
• Frequency range: 474-850 MHz for UK models
ii. VIDEO
• -H.264 (MPEG-4 part 10) main and high profile level
4.1/MPEG-2 MP@HL video decoder.
• -HD display multi format capable (1080i, 720p,
576p)
• -CVBS analogue output.(In HD channels, this will
not be available
2x8
iii. AUDIO
POWER CONSUMPTION (W)
• -MPEG-1 layer I/II, MPEG-2 layer II, AAC, HEAAC,
AC3, E-AC3
150 W (max)
< 1 W (Standby)
• -Sampling frequencies supported are 32, 44.1 &
48 kHz
PANEL
16:9 display, 32” Screen Size
DIMENSIONS (mm)
DxLxH (With foot): 212x 794 x 556
Weight (Kg): 12,3
DxLxH (Without foot): 97 x 794 x 520
Weight (Kg): 11,6
English - 30 -
MB61_[GB]_5110UK_IDTV_GOLD12_32841W_10070119_50179520.indd 30
27.10.2010 15:04:34