WASHER
DRYER
User Manual
Model Numbers:
WD1496FGW
WD1496FGS
WD1496FGB
WD1496FGR
Contents
REGISTER TO
ACTIVATE YOUR
2 YEAR
PARTS WARRANTY
SERVIS.CO.UK
0333 577 7232
Your appliance comes with a free one year parts and labour warranty.
Register within 30 days of purchase to receive a free second year
parts warranty.
T: 0333 577 7232
01
Welcome
02
Safety Instructions
07
Your Washer Dryer
10
Technical Specification
11
Installation
19
Setting Up
25
Usage
62
Maintenance
69
Clothing Care
73
Troubleshooting
81
Guarantee
83
Index
T: 0333 577 7232
WELCOME
SAFETY INSTRUCTIONS
WELCOME
ITEMS INCLUDED
Thank you for choosing this Servis Washer Dryer, which has been designed and manufactured to
give you many years of trouble-free service.
You may already be familiar with using a similar product but please take time to read these
instructions, which have been written to ensure you get the very best from your purchase.
Washer Dryer
Blanking caps x 4
Fill hose
PowerDry technology allows intensive drying of your garments by accelerating the hot air in your
Washer Dryer.
Fluid detergent level plate
Figure 1
WARRANTY
Servis provides you with a guarantee which will protect you should your Washer Dryer develop
an electrical or mechanical fault during the guarantee period. To ensure that you get a prompt
and efficient service, please register your Washer Dryer immediately.
You will find a warranty card included within the packaging. To register, complete the form, or:
Visit us at www.servis.co.uk
Call us on 0333 577 7232
01
T: 0333 577 7232
SAFETY INSTRUCTIONS
To ensure your safety and the safety of others, please read the following safety
precautions before you operate your Washer Dryer.
Your Washer Dryer conforms to current safety requirements. Inappropriate use can,
however, lead to personal injury and damage to property. To avoid the risk of accidents and
damage to your Washer Dryer, read this user guide carefully before using it for the first time.
It contains important information on the installation, safety, use and maintenance of your
Washer Dryer. Retain this user guide for future use and pass it on to any new owners.
Read this user guide before using or installing your Washer Dryer.
T: 0333 577 7232
02
SAFETY INSTRUCTIONS
Your Washer Dryer is for domestic use only and is only intended to wash and dry items
which are specified by the manufacturer to be machine washable and dryable on the label,
and textiles composed of hand washable wool or wool blend fabrics as well as satin, lace,
silk and other hand-washable garments. Do not use your Washer Dryer for any purpose not
expressly specified in this user guide.
This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
Before setting up your Washer Dryer, check for any external visible damage. Do not install
or use your Washer Dryer if it is damaged. Prolonged intensive use of your Washer Dryer
may call for additional ventilation.
Before connecting your Washer Dryer, ensure that the information on the data plate (voltage
and connected load) matches that of the mains electricity supply. If in doubt, consult a
qualified electrician.
Do not touch your Washer Dryer if your hands or feet are wet.
Never open the detergent drawer while the machine is running.
Faulty components must only be replaced by a suitably qualified Service Agent using
genuine spare parts.
Unauthorised repairs could result in unforeseen dangers for the user. Repairs should only be
undertaken by an approved service agent.
In the event of a fault or for cleaning purposes, your Washer Dryer is only completely
isolated from the electricity supply when it is unplugged from the mains.
Your Washer Dryer must only be connected to your water supply using the supplied new fill
hose. Old hoses must not be reused.
Do not make any alterations to your Washer Dryer, unless authorised to do so by Servis.
The packaging of the machine could be hazardous to children. Please refer to the disposal
instructions on the rear cover.
Do not connect your Washer Dryer to the mains electricity supply using an extension lead.
A damaged power cord/plug can cause fire or give you an electric shock. When damaged it
must be replaced. This should only be done by qualified personnel.
Please ensure that you have removed all of the packaging materials and protective tape
from the outside of your Washer Dryer, inside the drum and inside the detergent drawer
before using.
Never remove the plug from the socket by pulling the cord. Always hold the plug.
Never touch the power cord/plug with wet hands as this could cause a short circuit or
electric shock.
03
T: 0333 577 7232
T: 0333 577 7232
04
SAFETY INSTRUCTIONS
You must remove the transit bolts before using your Washer Dryer for the first time. Your
Washer Dryer will malfunction if operated with the transit bolts still in place.
Do not keep flammable or explosive chemicals near your Washer Dryer.
The necessary ambient temperature for operation of your Washer Dryer is 15-25 C.
Thoroughly rinse off any chemicals such as stain remover from your garments before beginning
a washing and drying programme.
Please ensure that garments loaded into your Washer Dryer are free from foreign objects such
as nails, needles, lighters and coins.
Do not use a detergent ball/device if you have selected a washing and drying programme as
this may cause a fire hazard.
0
Residue may build up on detergent and softeners exposed to air for a long period of time. Only
put softener or detergent in the drawer at the beginning of each wash.
Do not dry your laundry under the conditions specified below as they present a fire risk:
If the laundry is not washed.
Keep the document bag that contained this user manual out of reach of children and babies to
prevent the risk of suffocation.
If oil based stains are not pre-treated before beginning a washing or drying programme.
Keep the small items found in the document bag out of reach of small children and babies.
Laundry that has a high amount of sponge, foam, rubber or rubber like parts and accessories.
Do not exceed the maximum load for the washing or drying programme you have chosen.
Rubber, sponge, latex, shower bonnets, watertight textile products, rubber based objects and
clothes or pillows filled with rubber sponge must not be dried in your Washer Dryer.
Never force the door open when your Washer Dryer is running.
Please follow the manufacturers’ instructions regarding the use of fabric conditioner or any
similar products that you intend to use in your Washer Dryer.
Do not stop your Washer Dryer before the drying phase of a programme has been completed.
Do not touch the drain hose or any discharged water while your Washer Dryer in running. The
high temperatures involved pose a burn risk.
Open the drum door fully after the drying process. Do not touch the door glass. It will reach
high temperatures and pose a burn risk.
05
T: 0333 577 7232
T: 0333 577 7232
06
YOUR WASHER DRYER
FRONT VIEW
REAR VIEW
1 Detergent drawer
2 Control panel
2
3
3
Door
handle
Transit bolts
3
Cold water
inlet
3
Transit bolts
3
1
Drain hose
4 Pump filter cover
07
1 Detergent drawer; allows you to insert detergent, fabric conditioner and starch.
2 Control panel; allows you to configure the required settings for your washing and
drying.
3 Door handle; provides you with access to the drum.
4 Pump filter cover; provides access to the pump filter for maintenance purposes.
1 Drain hose; provides an outlet for the dirty water from your Washer Dryer.
2 Cold water inlet; connects your Washer Dryer to your cold water supply.
3 Transit bolts; please remove before using your Washer Dryer.
Figure 2
Figure 3
T: 0333 577 7232
T: 0333 577 7232
08
YOUR WASHING DRYER
TECHNICAL SPECIFICATION
DETERGENT DRAWER
TECHNICAL SPECIFICATION
1 Compartment II
2
Compartment
3 Compartment I
Voltage V/Frequency (Hz)
220-240V/50Hz
Electrical Current (A)
10
Power Rating (W)
2200
Water Consumption (l/Cycle)
(Washing and Drying)
112
Energy Consumption (kWh/Cycle)
(Washing and Drying)
6.12
Unpacked Dimensions (H x W x D) (cm)
84.5 x 59.7 x 58.2
Gross Weight (kg)
81
Spin Speed (rpm)
1 Compartment II; add detergent for the main wash.
Compartment; for fabric conditioner and liquid starch.
2
3 Compartment I; add detergent for the pre-wash.
Figure 4
09
T: 0333 577 7232
1400
Drum Volume (lt)
61
Max Load Capacity (Washing) (kg)
9
Max Load Capacity (Drying) (kg)
6
Energy Rating
A
Washing Efficiency
A
Washing Noise (dBA)
58
Spin Noise (dBA)
77
Drying Noise (dBA)
64
T: 0333 577 7232
10
INSTALLATION
INSTALLATION REQUIREMENTS
To avoid risk of injury, please take care when moving your Washer Dryer. It is heavy and we
recommend that a minimum of two people move your Washer Dryer.
To unpack your Washer Dryer and manoeuvre it to the installation area, one person should hold
it by the front feet and the other person at the edge of the lid at the rear.
Your Washer Dryer measures 84.5 x 59.7 x 58.2cm and will require an installation area with the
space to allow the door to fully open and provide easy access to the plumbing and electrical
connections.
The most suitable installation surface for your Washer Dryer is a concrete floor as it is less
prone to vibration during the spin cycle. Soft floor surfaces such as carpets and rugs are not
suitable.
If you have to install your Washer Dryer on a wooden floor, we recommend that a waterresistant wooden base at least 30mm thick is installed. The base should span several joists and
be bolted down. Check for the presence of pipes and cables before installing.
If possible, install your Washer Dryer in the corner of the room as it is often the most stable part
of the floor.
Do not install your Washer Dryer in rooms where temperatures below freezing may occur as
frozen hoses may burst or split.
2 Pull out the remaining plastic section of each transit bolt by hand. This will require a
reasonable amount of force (fig 5c).
3 Insert the blanking caps (4 off): Push the cap into the hole until the four connectors click into
place. Check that the cap is flush with the Washer Dryer.
a:
b:
c:
REMOVAL OF TRANSIT BOLTS
The transit bolts are used to protect your Washer Dryer from damage during transportation and
must be removed before using your Washer Dryer for the first time. Keep the transit bolts safe
and re-fit them if you need to transport your Washer Dryer in the future.
The four transit bolts are located on the back of your Washer Dryer (fig 5a).
To remove the transit bolts (4 off):
1 Remove each bolt by turning anti-clockwise with a suitable spanner (fig 5b).
11
T: 0333 577 7232
Figure 5
To re-fit the transit bolts (4 off) for future transportation:
1
2
3
Pull and remove the four plastic blanking caps.
Insert the plastic sections of the transit bolts into the exposed holes.
Insert the bolts into the plastic sections of the transit bolts and tighten with a suitable
spanner until secure.
T: 0333 577 7232
12
INSTALLATION
ADJUSTING THE FEET
WATER SUPPLY CONNECTION
For safe operation, it is important that your Washer Dryer is level and securely positioned on
all four feet. Incorrect installation may cause the Washer Dryer to vibrate and increase your
water and electricity consumption. Never place cardboard, wood or similar materials under your
Washer Dryer to increase stability.
The four adjustable feet are used to level the Washer Dryer. To adjust the feet:
Your Washer Dryer uses an energy efficient cold fill system, which means that only the water
required to wash the laundry is heated. As a result, no heat is lost in the pipeline from the hot
water supply.
Connect your Washer Dryer to your cold water supply only. If your previous machine had a hot
and cold fill, check that the hot tap on your water supply is closed to avoid leakage. Only use the
fill hose supplied and not one from your old Washer Dryer. Only one hose is required to install
your Washer Dryer to the cold water supply. The inlet hose provided with your Washer Dryer
connects the rear of your machine and the cold water supply.
To connect your Washer Dryer to the cold water supply:
1
2
3
4
5
Loosen the plastic locking nut by turning anti-clockwise (fig 6a).
To increase the height of the machine, turn the feet anti-clockwise (fig 6b).
To decrease the height of the machine, turn the feet clockwise (fig 6b).
After making adjustments, use a spirit level to check that the machine is level.
Once the machine is level, tighten the locking nuts by turning clockwise (fig 6c).
a:
1
Connect the angled end of the fill hose to the cold water inlet on the rear of your Washer
Dryer by screwing the threaded connector clockwise (fig 7). Take care not to overtighten the
connection. Hand tight is sufficient.
b:
c:
Figure 6
13
T: 0333 577 7232
Figure 7
T: 0333 577 7232
14
INSTALLATION
WATER SUPPLY CONNECTION
2
Screw the straight end of the hose clockwise to a 19mm (3/4’’) cold water tap until hand
tight (fig 8). Take care not to trap or kink the hose.
a:
Max height 80cm
Min height 0cm
a: The drain hose
can be connected
to a standpipe, as
shown. The hose
must be between
0cm and 80cm
from the ground.
b:
b: The drain hose
can be connected
to a household
sink, as shown.
The hose must be
between 60cm to
100cm from the
ground.
Figure 8
DRAIN HOSE CONNECTION
Do not connect your Washer Dryer to a surface water drain.
Connect your Washer Dryer to your household drainage system (fig 9).
For your Washer Dryer to function properly the outlet end of the drain hose must be at a
minimum of 60cm and a maximum of 100cm from the ground.
CAUTION: Check to ensure that the hose is not trapped, kinked, twisted, folded or crushed.
Do not attempt to extend the drain hose by adding extra sections.
Figure 9
15
T: 0333 577 7232
T: 0333 577 7232
16
INSTALLATION
The cold water pressure for a normal household system ranges from netween 0.1 to 1 Mpa. Your
Washer Dryer will run at optimum efficiency in this range.
Once you have made all of the connections, carefully turn your cold water supply on and check
for leaks.
ELECTRICAL CONNECTION
Your Washer Dryer requires a 220-240V, 50Hz mains supply. Do not use any other supply.
Your Washer Dryer may be fitted with a moulded plug, which cannot be rewired.
If the fuse cover becomes damaged, you must not use the plug.
If your plug requires changing because it is not suitable for your socket, or it is damaged,
you should consult a qualified electrician.
Fuse:
Replacement fuses should be ASTA-approved to BS1362 and have the correct 10 Amp
rating.
Replacement fuses can be purchased from an electrical supplier.
17
T: 0333 577 7232
T: 0333 577 7232
18
SETTING UP
CONTROL PANEL OVERVIEW
1
USING THE SMART TOUCH BUTTONS
2
4
A series of 6 smart touch buttons can be found below the information screen. To make a
selection, press the button below the desired selection choice on the information screen. For
button’ press the button
example, if the instructions in this user manual say ‘Press the
symbol.
directly below the
SETTING UP YOUR WASHER DRYER
Your Washer Dryer has a range of adjustable features that can be altered to suit your
preferences. To make the initial settings please ensure that:
3
5
1
2
3
1 Programme Dial; Allows you to select a washing and drying programme.
2 Information Screen; Displays details of the selected programme and information on the
status of your Washer Dryer.
3 Smart Touch Function Buttons: Allow you to select or adjust a particular function.
4 Start/Pause Button: Start or Pause the selected programme.
5 Memory Button: Allows you to store preferred settings.
Figure 10
19
T: 0333 577 7232
4
The transit bolts have been removed.
Your Washer Dryer has been correctly connected to your water supply and your water
drainage system.
Your Washer Dryer has been connected to an appropriate mains power supply and is
switched on at the socket.
The programme dial is turned on i.e. is not in the ‘STOP’ position.
Current Time Setting
We recommend that you set the correct time during the initial set-up of your Washer Dryer. After
turning your Washer Dryer on for the first time it will check to see if you would like to set the
current time ‘set day time’ will be displayed on the information screen (fig 11).
To set the current time, press the
without setting the time.
button. Alternatively, press the
button to exit
T: 0333 577 7232
20
SETTING UP
Language Selection Setting
To select the language used on the information screen, press the
button. When setting the
language for the first time ‘Select Language’ will appear on the information screen (fig 12).
Figure 11
If you have chosen to set the current time:
Press the button under the hour setting until it displays the current hour.
Press the button under the minute setting until the current time is shown.
button.
To confirm the current time setting, press the
Once you have set the current time, your Washer Dryer will automatically display the main
screen of the programme selected by the programme dial. If you would like to make further
button and use the
button to select the setting you
changes to your settings, press the
wish to alter.
button from the main
You can change the current time setting at any time by pressing the
button until the time is displayed. Use the buttons to
programme screen and selecting the
increase the hours and minutes.
Please Note: We strongly recommend that you set the current time accurately as other
operating features depend on it.
Time setting information will be lost if you leave your Washer Dryer unplugged for more than 15
days. In this case you will be prompted to set the time when you next turn your Washer Dryer on.
21
T: 0333 577 7232
Figure 12
To change the current language setting press the
button.
To exit the language selection screen without making a selection, press the
button.
If you have chosen to change the current language setting:
You can cycle through the available languages using the and buttons.
Press the
button to select the desired language.
You will be asked to confirm the language selected, for example ‘Change to Turkce?’
Press the
button to confirm the selection, or the button to cancel the selection and
make another choice.
button. The current language
You can change the language at any time by pressing the
selection will be displayed, for example ‘English’. Press the and buttons to cycle through the
button to select your choice.
available languages and use the
T: 0333 577 7232
22
SETTING UP
Eco Time Setting (Economic Time Interval)
To help make savings on your energy bills, your Washer Dryer contains an Eco Time Setting. This
allows you to set your Washer Dryer to run during the hours when your electricity tariff is more
economical. Please be aware that a smart counter will be required in order for this mode to
work. When setting the Economic Time Interval fot the first time:
Press the
button on the main programme screen and use the button until
and
‘set economic time zone’ is displayed on the information screen.
Press the
button to set Eco Time, or the button to return to the main programme
screen.
If you have chosen to set Eco Time:
and the start and end time of the economic time interval will be displayed on the
information screen (fig 13).
Use the and buttons to set the start and finish time for the economic time interval.
Press the
button to confirm the selection, or the button to return to the main
programme screen.
button from the main
You can change the Eco Time hours at any time by pressing the
button until the Eco Time hours are displayed. Use the
programme screen and using the
and buttons to set the desired Eco Time interval.
To activate the Eco-Time setting, please refer to the information on additional functions on
page 53.
Sound Adjustment
You can choose to turn the warning sounds of your Washer Dryer on or off. To access the sound
settings:
Press the
button on the main programme screen and then press the
button until the
and
symbols on
sound adjustment settings are displayed. This is shown by the
the information screen. Alternatively, if you are already in the settings menu, simply use the
button to navigate to the sound adjustment settings.
Use either the or buttons to toggle the warning sounds on or off. A
symbol and
symbol indicates
3 audible beeps indicates that the warning sounds are turned on. A
that the warning sounds are turned off.
To return to the main programme screen, press the
button, or press the
button .
Screen Brightness Setting
You can adjust the brightness setting of the information screen on your Washer Dryer:
Figure 13
23
T: 0333 577 7232
Press the
button on the main programme screen and then press the
button until the
symbol. Alternatively, if
brightness setting screen is displayed. This is shown by the
you are already in the settings menu, simply use the button to navigate to the brightness
settings.
T: 0333 577 7232
24
USAGE
Use the button to decrease the brightness of the information screen, or the button
to increase the brightness. The information screen displays a bar showing the level of
brightness selected (fig 14).
Revert to Factory Settings
You have the option to revert your Washer Dryer to the factory default settings:
Press the
button on the main programme screen and then press the
button until the
screen shown in fig 15 is displayed. If you are already in the setting menu, simply use the
button to navigate to the factory settings screen.
Figure 14
To return to the main programme screen press the
select another setting you wish to alter.
button, or press the
button to
Figure 15
Screen Contrast Setting
You can adjust the contrast of the information screen on your Washer Dryer:
Press the
button on the main programme screen and then press the
button until
symbol. Alternatively, if
the contrast setting screen is displayed. This is shown by the
you are already in the settings menu, simply use the button to navigate to the contrast
settings.
Use the button to reduce the level of contrast, or the button to increase the level of
contrast.
To return to the main programme screen, press the
button or press the
button to
select another setting you wish to alter.
25
T: 0333 577 7232
Press the
symbol to reset your Washer Dryer to factory settings. You will be asked
to confirm your choice. ‘Reset to Factory Settings?’ will be displayed on the information
button to confirm your selection or the to cancel.
screen. Press the
You can return to the main programme screen by pressing the
button.
T: 0333 577 7232
26
USAGE
Empty all pockets on items of clothing, brush out any sand and dirt from pockets and cuffs.
Close zips and fasten any hooks and eyes.
Items such as trousers, t-shirts, sweat shirts and knitted garments should be turned inside
out.
Remove any weights from curtains, or place in a laundry bag.
Any loose wiring in bras and shirt collar stiffeners should be removed or sewn in.
RUNNING YOUR FIRST WASH
Before using your Washer Dryer for then first time; please check that:
1
2
3
The transit bolts have been removed.
Your Washer Dryer has been correctly connected to your water supply and your water
drainage system.
Your Washer Dryer has been connected to an appropriate mains power supply and is
switched on at the socket.
Sorting your Laundry:
Sort your laundry by colour. Always wash whites and coloureds separately.
Dark textiles may contain excess dye and should be washed separately several times
before being included in a mixed load.
Follow the instructions given in the care labels on the clothing.
Do not wash any items in the machine that the manufacturer has specified as non-washable
on the care label.
Do not dry any items in the Washer Dryer that the manufacturer has specified as non-dry on
the care label.
Badly soiled or stained areas can be pre-treated with liquid detergent or stain removers by
following the manufacturer’s instructions.
If you use a solvent-based cleaning agent to pre-treat a stain, protect any plastic parts such
as buttons. Rinse the cleaning agent off before loading the washing into the machine.
Do not use a solvent-based cleaning agent in your Washer Dryer.
Tests were carried out on your Washer Dryer at the factory; as a result, water may be left in
the machine. To remove any water we recommend that the first wash is carried out without any
laundry:
1
2
3
3
Open the detergent drawer, pour in half a measuring cup of all-purpose detergent into
compartment II and close the drawer.
Select the ‘Drum Cleaning’ programme by turning the programme dial to extras. ‘drum
clean’ will be displayed on the information screen.
Press the
button to select the programme.
Press the
button to begin the programme.
WASHING SEQUENCE
Please follow the steps suggested to get the best results from your washing.
Preparing your Laundry:
CAUTION: Please be aware that any foreign objects such as coins or paper clips can cause
damage to your garments and components in your Washer Dryer.
27
T: 0333 577 7232
Loading the Drum:
1
2
3
Pull the door open using the handle.
Select a programme before loading laundry into your Washer Dryer. If you do not select a
programme the load sensor will not be activated.
Load your items of clothing into the drum, ensuring they are loosely packed. You will achieve
better wash results if you mix up large and small items. Items of varying size will help
distribute the load more evenly during spinning.
T: 0333 577 7232
28
USAGE
Take care not to exceed the maximum load of the drum as this will give poor wash results and
cause creasing. Refer to the tables on 37 to 48 for information on load capacities for the various
programmes.
The maximum load capacity of your Washer Dryer may change according to the programme you
have selected. If you exceed the load capacity of the selected programme a symbol will be
displayed on the information screen accompanied with a warning sound. If this should occur, we
recommend that you remove items of laundry until the symbol disappears.
Your Washer Dryer contains a load detection system. This sophisticated system measures
the weight of the laundry inside your washer dryer and displays the increase in load on the
information screen. Your Washer Dryer automatically adjusts programme features such as
programme duration, energy consumption and water consumption according to the load.
4
Once you have loaded the drum gently push the door until it clicks shut (there will be an
audible beep if the sound settings are turned on). Check that no items of clothing are
trapped between the rubber seal and the door.
You can use any detergent produced for automatic washing machines. The use of dispensing
aids such as balls is recommended, if they are supplied with the detergent.
Please Note: Do not use a dispensing aid if you have selected a programme with a drying
function as this could pose a fire risk.
Tablets are suitable for full loads; however, it may be impractical to reduce them for smaller
loads. Some tablets do not dissolve as quickly as others and may not be suitable for wash cycles
of short duration.
It is possible to use fluid detergents in all programmes without a pre-wash. To do this, slide the
fluid detergent level plate into the guides in compartment II of the detergent drawer (fig 16). Use
the lines on the plate as a guide to fill the drawer to the required level.
The amount of detergent to use will depend on the dirtiness of your clothes and the hardness of
your water supply; guidelines will be on the packaging of your detergent.
Adding Detergent:
Please take care to add the correct amount of detergent to your Washer Dryer.
If too little detergent is added:
Your laundry may not get washed properly and may become grey and stiff over time.
Spots of fat may appear on your laundry.
Limescale may form on the heater elements.
If too much detergent is added:
Figure 16
Excessive foam will be formed resulting in poor wash results.
Water consumption will increase.
29
T: 0333 577 7232
T: 0333 577 7232
30
USAGE
If your clothes are only slightly soiled, do not prewash and put a small amount of detergent,
as specified by the manufacturer, into compartment II of the detergent drawer.
If your clothes are excessively soiled, select a programme with pre-wash and put ¼ of
the detergent to be used into compartment I of the detergent drawer and the rest in
compartment II.
Your Washer Dryer contains a system to help you select the correct quantity of detergent based
symbol and indicates
on the weight of your laundry. The information screen displays a
how much detergent is required (1/3, 2/3 or 3/3). For example, the screen in fig 17 recommends
that you fill the detergent drawer to the MAX level.
Fabric Conditioners and Liquid Starch:
Fabric conditioners make garments soft to handle.
Starch stiffens and gives body to items such as bed linen.
To add fabric conditioner or liquid starch, pour the amount as instructed on the packaging into
compartment of the detergent drawer, taking care not to exceed the MAX level.
the
Selecting a Programme:
To select the desired programme, turn the programme dial either clockwise or anti-clockwise
until the marker on the dial points to the chosen programme.
The programme name and features will be displayed on the information screen.
For some programmes you can adjust the water temperature by pressing the button. The
selected temperature will be displayed in the top left corner of the information screen.
For some programmes you can adjust the spin speed by pressing the
button. The
selected spin speed will be displayed on the top of the information screen.
Figure 17
Figure 18 shows the information screen when the cotton programme is selected, the
temperature shown is 90 0C and the spin speed 1400 rpm.
Water Softener:
A water softener can be used to reduce the amount of detergent required in hard water areas.
Follow the guidance on the packaging and dispense as instructed. First add the detergent, then
the water softener.
31
T: 0333 577 7232
Please Note: For more information on available temperature and spin speed settings for
individual programmes, refer to the tables on 37 to 48.
After setting the spin speed, if you select a drying programme, your machine will select the spin
speed automatically to enhance drying performance,
T: 0333 577 7232
32
USAGE
Please Note: if the desired drying symbol is not displayed as you use the button to
cycle through the options, it means that the feature is not available for the washing or drying
programme you have selected.
To cancel a drying function, press the
main programme page.
button until the information screen returns to the
Drying with Duration
If you would like to set the duration of a drying programme:
Figure 18
Press the
button until the desired drying time is displayed.
Drying selections will be displayed on the top of the information screen as
or
DRYING YOUR WASHING
Figure 19 shows the information screen when a drying time of 30 minutes has been selected.
If you would like your laundry dried at the end of a washing programme you have several options
available. When you have selected the desired programme:
Press the
button until one of the following symbols appears on the information screen:
Cupboard Dry: Recommended for laundry that you will put directly in a cupboard after
taking out of your Washer Dryer.
Hanger Dry: This is recommended for laundry that requires hanger drying.
Iron Dry: Select this option for laundry that you will iron after washing.
Figure 19
33
T: 0333 577 7232
T: 0333 577 7232
34
USAGE
Please note: If one of the
symbols is not displayed, it means that
the drying duration is not appropriate for the programme you have selected or the load in your
machine.
Do not dry towels, cotton and synthetic clothes together. Select the most appropriate
drying programme for the clothes.
The programme factory settings are shown in bold type.
Duration Drying Programs
Amount of laundry to dry
Recommended drying times
1 kg
30 minutes
2 kg
60 minutes
3.5 kg
120 minutes
If the amount of laundry to be dried is above 3.5 kg, it is advised that cupboard, hanger or iron
drying is selected.
To cancel a drying with duration function, press the
displays the main programme page,
button until the information screen
Programme Modes and Information
The following tables provide helpful information on the individual programmes.
Please be aware that when you wish to select more than one additional function, they may
not be compatible with one another.
The programme duration may change due to:
The amount of laundry in your Washer Dryer.
The hardness of the water.
The ambient temperature.
The selected additional functions.
35
T: 0333 577 7232
T: 0333 577 7232
36
USAGE
Eco 200
Cotton
Selectable Washing Temperatures (0C)
(Cold Water), 300, 400, 600, 900*
Maximum Washing/Drying Capacity (kg)
9.0/6.0
Selectable Spin Speed (rev/min)
(No Spin), 400, 600, 800, 1000, 1200,
1400*
Laundry Type/Descriptions
Heat resistant cotton and linen textiles
(underwear, bedding, tablecloths and towels)
(max 4.0 kg)
Selectable Additional Functions**
(
)
Selectable Washing Temperatures (0C)
200*
Maximum Washing/Drying Capacity (kg)
4.0/4.0
Selectable Spin Speed (rev/min)
Laundry Type/Description
Selectable Additional Functions**
(No Spin), 400, 600, 800, 1200, 1400*
Less dirty, cotton and linen textiles (bedding,
tablecloths and towels)
(max 2.0 kg)
(
)
Selectable Drying Functions**
Selectable Drying Functions**
Cotton Eco
Selectable Washing Temperatures (0C)
Maximum Washing/Drying Capacity (kg)
Selectable Spin Speed (rev/min)
Laundry Type/Descriptions
Selectable Additional Functions**
(Cold Wash), 300, 400, 600*
9.0/6.0
(No Spin), 400, 600, 800, 1200, 1400*
Cotton and linen textiles (underwear,
bedding, tablecloths, towels) (max 4.0 kg)
(
)
Selectable Drying Functions**
(*) Programme factory default settings.
(**) When you want to select more than one additional function, the additional functions you wish to select may
not comply with each other.
Do not dry towels, cotton and linens, and synthetic and synthetic mix clothes together. For drying select the most
appropriate drying programme for the clothes.
NOTE: THE PROGRAMME DURATION MAY CHANGE ACCORDING TO THE AMOUNT OF LAUNDRY, TAP WATER,
AMBIENT TEMPERATURE AND SELECTED ADDITIONAL FUNCTIONS.
37
T: 0333 577 7232
T: 0333 577 7232
38
USAGE
Synthetics
Delicates
Selectable Washing Temperatures (0C)
3.5/3.5
(No Spin), 400, 600, 800*
Selectable Spin Speed (rev/min)
Laundry Type/Descriptions
Maximum Washing Capacity (kg)
Synthetic and synthetic mix textiles
(synthetic content shirt, blouse, socks etc)
Selectable Additional Functions**
(
Wool***
Synthetic***
Maximum Washing/Drying Capacity (kg)
Selectable Washing Temperatures (0C)
(Cold Wash), 300, 400, 600*
Cold Wash), 300, 400*
2.5
(No Spin), 400, 600*
Selectable Spin Speed (rev/min)
Laundry Type/Descriptions
Woollen and wool mix laundry with machine
washable labels
Selectable Additional Functions
)
Selectable Drying Functions
(
)
-
Selectable Drying Functions**
Selectable Washing Temperatures (0C)
Selectable Washing Temperatures (0C)
For washing curtains only.
Selectable Additional Functions**
Selectable Drying Functions**
(
2.5
(No Spin), 400, 600*
Selectable Spin Speed (rev/min)
(No Spin), 400, 600*
Selectable Spin Speed (rev/min)
Laundry Type/Descriptions
Maximum Washing Capacity (kg)
2.5
)
-
Silk***
Curtain***
Maximum Washing/Drying Capacity (kg)
(Cold Wash), 300*
(Cold Wash), 300, 400*
Laundry Type/Descriptions
Silk mixture laundry with machine washable
labels.
Selectable Additional Functions**
Selectable Drying Functions**
(
)
-
(*) Programme factory default settings.
(**) When you want to select more than one additional function, the additional functions you wish to select may
not comply with each other.
(***) These are sub-programmes. Refer to page 55 for programme selection.
Do not dry towels, cotton and linens, and synthetic and sythetic mix clothes together.
For drying select the most appropriate drying program for the clothes.
(*) Programme factory default settings.
(**) When you want to select more than one additional function, the additional functions you wish to select may not
comply with each other.
(***) These are sub-programmes. Refer to page 55 for programme selection.
Do not dry towels, cotton and linens, and synthetic and sythetic mix clothes together.
For drying select the most appropriate drying programme for the clothes.
NOTE: THE PROGRAMME DURATION MAY CHANGE ACCORDING TO THE AMOUNT OF LAUNDRY, TAP WATER,
AMBIENT TEMPERATURE AND SELECTED ADDITIONAL FUNCTIONS.
NOTE: THE PROGRAMME DURATION MAY CHANGE ACCORDING TO THE AMOUNT OF LAUNDRY, TAP WATER,
AMBIENT TEMPERATURE AND SELECTED ADDITIONAL FUNCTIONS.
39
T: 0333 577 7232
T: 0333 577 7232
40
USAGE
Extras
Selectable Washing Temperatures (0C)
Maximum Washing Capacity (kg)
(Cold Wash), 300, 400*
2.5
(No Spin), 400, 600, 800*
Selectable Spin Speed (rev/min)
Laundry Type/Descriptions
For washing a fibre duvet with a machine
washable label. (max. 2.5 kg)
Selectable Additional Functions**
)
-
Selectable Washing Temperatures (0C)
(Cold Wash),30°, 400*, 60°
Maximum Washing/Drying Capacity (kg)
3.5
Selectable Spin Speed (rev/min)
600*
Laundry Type
Synthetic and synthetic mix textiles.
(synthetic content shirt, blouse, socks etc).
Selectable Additional Functions**
(
)
Selectable Drying Functions**
Refresh***
Selectable Drying Functions**
(
Synthetics Wash & Dry***
Duvet
Selectable Washing Temperatures (0C)
-
Maximum Washing/Drying Capacity (kg)
1.0 kg
Selectable Spin Speed (rev/min)
-
Laundry Type
This is not a washing programme. It simply
breathes hot air into your laundry refreshing
it.
Selectable Additional Functions**
Selectable Drying Functions**
(*) Programme factory default settings.
(**) When you want to select more than one additional function, the additional functions you wish to select may
not comply with each other.
Do not dry towels, cotton and linens, and synthetic and sythetic mix clothes together.
For drying select the most appropriate drying programme for the clothes.
NOTE: THE PROGRAMME DURATION MAY CHANGE ACCORDING TO THE AMOUNT OF LAUNDRY, TAP WATER,
AMBIENT TEMPERATURE AND SELECTED ADDITIONAL FUNCTIONS.
41
T: 0333 577 7232
-
(*) Programme factory default settings.
(**) When you want to select more than one additional function, the additional functions you wish to select may
not comply with each other.
(***) These are sub-cycles. Refer to page 55 for programme selection.
Do not dry towels, cotton and linens, and synthetic and sythetic mix clothes together.
For drying select the most appropriate drying programme for the clothes.
NOTE: THE PROGRAMME DURATION MAY CHANGE ACCORDING TO THE AMOUNT OF LAUNDRY, TAP WATER,
AMBIENT TEMPERATURE AND SELECTED ADDITIONAL FUNCTIONS.
T: 0333 577 7232
42
USAGE
Extras
Selectable Washing Temperatures (0C)
-
Selectable Washing Temperatures (0C)
-
Maximum Washing/Drying Capacity (kg)
9.0/6.0
Maximum Washing/Drying Capacity (kg)
-
Selectable Spin Speed (rev/min)
(No Spin), 400, 600, 800, 1000, 1200,
1400*
Selectable Spin Speed (rev/min)
-
Laundry Type/Description
This programme drains your Washer Dryer.
Laundry Type/Description
This programme can be used for additional
rinsing after washing.
Selectable Additional Functions**
(
Drain***
Rinse***
Extras
Selectable Additional Functions
Selectable Drying Functions
)
Selectable Drying Functions**
-
Selectable Washing Temperatures (0C)
Spin***
Maximum washing/drying Capacity (kg)
9.0/6.0
*
Selectable Spin Speed (rev/min)
400, 600, 800, 1000, 1200, 1400
Laundry Type/Description
This programme can be used for additional
spinning after washing.
Selectable Additional Functions**
Drum Clean***
Selectable Washing Temperatures (0C)
Maximum washing/drying Capacity (kg)
-
Selectable Spin Speed (rev/min)
-
Laundry Type/Descriptions
This is a drum cleaning programme and must
be run without laundry.
Selectable Additional Functions**
Selectable Drying Functions**
-
Selectable Drying Functions**
Note: Please refer to the footnotes on page 44 for additional information on settings.
(*) Programme factory default settings.
(**) When you want to select more than one additional function, the additional functions you wish to select may
not comply with each other.
(***) These are sub-programmes. Refer to page 55 for programme selection.
Do not dry towels, cotton and linens, and synthetic and sythetic mix clothes together.
For drying select the most appropriate drying programme for the clothes.
NOTE: THE PROGRAMME DURATION MAY CHANGE ACCORDING TO THE AMOUNT OF LAUNDRY, TAP WATER,
AMBIENT TEMPERATURE AND SELECTED ADDITIONAL FUNCTIONS.
43
T: 0333 577 7232
T: 0333 577 7232
44
USAGE
Sensitive
Selectable Washing Temperatures (0C)
Maximum Washing/Drying Capacity (kg)
Selectable Spin Speed (rev/min)
Laundry type/Descriptions
Selectable Additional Functions**
Super Rapid 12 min
Selectable Washing Temperatures (0C)
(Cold Wash), 30°, 40°, 600*
9.0/6.0
Maximum Washing/Drying Capacity (kg)
(No Spin), 400, 600, 800*
Selectable Spin Speed (rev/min)
Baby clothes with machine dryable label.
Laundry Type
*
Selectable Drying Functions**
(Cold Wash), 300*
4.5 kg (9 kg for the W&D models)
(No Spin), 400, 600, 800*
For washing less dirty cotton, coloured and
linen textiles in a little as 12 minutes.
Note: As the washing time is short,
less detergent is required than in other
programmes.
Memory
Used to select your preferred washing, drying and additional function settings which you have
already stored in the memory.
For information on how to store settings in memory, see page 57.
(*) Programme factory default settings.
(**) When you want to select more than one additional function, the additional functions you wish to select may
not comply with each other.
Do not dry towels, cotton and linens, and synthetic and sythetic mix clothes together.
For drying select the most appropriate drying programme for the clothes.
NOTE: THE PROGRAMME DURATION MAY CHANGE ACCORDING TO THE AMOUNT OF LAUNDRY, TAP WATER,
AMBIENT TEMPERATURE AND SELECTED ADDITIONAL FUNCTIONS.
45
T: 0333 577 7232
Rapid
Selectable Additional Functions
Selectable Drying Functions
Daily Fast 60° 60 min
Selectable Washing Temperatures (0C)
(Cold Wash), 30°, 40°, 600*
Maximum washing/drying Capacity (kg)
4.5 kg (9 kg for the W&D models)
Selectable Spin Speed (rev/min)
(No spin), 400, 600, 800, 1000, 1200,
1400*
Laundry Type/Description
Dirty, cotton, coloured and linen textiles.
(The washing duration for loads of 2kg and
under is 30 minutes).
Selectable Additional Functions**
Selectable Drying Functions**
Note: Please refer to the footnotes on page 45 for additional information on settings.
T: 0333 577 7232
46
USAGE
Gentle Dry
Quick Wash & Dry 29 min
Selectable Washing Temperatures (0C)
-
Selectable Washing Temperatures (0C)
Maximum Washing/Drying Capacity (kg)
3.5
Selectable Spin Speed (rev/min)
-
Laundry type/Descriptions
Cotton laundry with machine dryable label.
Selectable Additional Functions**
Selectable Drying Functions**
Maximum Washing/Drying Capacity (kg)
0.5 (3 shirts) (29 minutes)
1.5 (9 shirts) (60 minutes)
Selectable Spin Speed (rev/min)
800*
Laundry type/Descriptions
Cotton, coloured and linen laundry with
machine dryable label. Your Washer Dryer
calculates the programme duration depending
on load.
*
Dry
(Cold Wash), 300*
Wash & Dry
Selectable Additional Functions**
Cotton Dry
0
Selectable Washing Temperatures ( C)
-
Maximum Washing/Drying Capacity (kg)
6.0
Selectable Spin Speed (rev/min)
-
Laundry type/Descriptions
Cotton laundry with machine dryable label.
*
Cotton 60° Wash & Dry
Selectable Additional Functions**
Selectable Drying Functions**
Selectable Drying Functions**
*
(*) Programme factory default settings.
(**) When you want to select more than one additional function, the additional functions you wish to select may
not comply with each other.
Do not dry towels, cotton and linens, and synthetic and sythetic mix clothes together.
For drying select the most appropriate drying programme for the clothes.
NOTE: THE PROGRAMME DURATION MAY CHANGE ACCORDING TO THE AMOUNT OF LAUNDRY, TAP WATER,
AMBIENT TEMPERATURE AND SELECTED ADDITIONAL FUNCTIONS.
Selectable Washing Temperatures (0C)
(Cold Wash),30°, 40°, 600*, 90°
Maximum drying Capacity (kg)
6.0
Selectable Spin Speed (rev/min)
1400*
Laundry Type/Descriptions
Cotton and linen textiles (underwear, bed
sheet, tablecloth, towel (max. 4.0 kg).
Selectable Additional Functions**
Selectable Drying Functions**
(
)
*
Note: Please refer to the footnotes on page 47 for additional information on settings.
47
T: 0333 577 7232
T: 0333 577 7232
48
USAGE
Temperature Selection:
Spin Selection:
It can often be difficult to know which temperature setting is best. To help with this, we have
provided a table with common temperatures and their typical uses.
You can select a Spin Speed to meet the needs of your wash. The table below suggests some
typical selection speeds for common types of clothing. Please refer to the programme tables on
pages 37 to 48 for available spin speeds for individual programmes.
Temperature
Typical Use
Laundry
rpm
300C
This is the lowest wash temperature that
we recommend. By using a detergent that
can work at this temperature, you’ll save on
water and electricity bills.
Cottons
1400
Delicate
600
Woollens
1400
This is the most common wash temperature,
suitable for most everyday items.
Shirts
600
Denim
900
Dark Garments
1400
400C
0
50 C
This is suitable for most polyester/cotton
mixtures and nylon.
600C
This higher temperature is recommended for
heavily soiled garments such as baby clothes
or bed linen and towels.
This is suitable for white cottons and linen
that show dirt.
900C
You will be pleased to learn that your Servis Washer Dryer has an in-built sensor that prevents
your Washer Dryer operating with an out-of-balance load; it will make several attempts to
balance the load prior to the spin cycle. If it is not possible for your Washer Dryer to balance the
load, your Washer Dryer will abort the spin cycle. To reduce the likelihood of this happening, we
recommend that you avoid small wash loads containing items that could become heavy through
water absorption.
Please be aware that the programme setting provides the default temperature for the selected
programme. You can override this setting by decreasing the temperature should you wish.
49
T: 0333 577 7232
T: 0333 577 7232
50
USAGE
ADDITIONAL FUNCTIONS
Before starting a selected programme you have the option to select an additional function:
Press the
button to view the available additional functions for the selected programme.
Please Note: Not all additional functions are available for every programme. Please refer to
the programme tables on pages 37 to 48 for further information.
Figure 20
If you do not select an additional function within 5 seconds, the information screen will
return to the main programme page.
Once you have selected an additional function, the information screen will return to the
main programme screen within approximately 5 seconds.
Extra Rinse: This allows you to add up to 3 additional rinses to the end of the selected
wash programme.
Pre-Wash: This allows you to give heavily soiled laundry a pre-wash before the main
washing programme takes place.
Indicates that 1 additional rinse is made at the end of the washing programme.
Indicates that 2 additional rinses are made at the end of the washing programme.
Press the
button to activate the pre-wash additional function. The screen shown in fig
20 will appear.
Indicates that 3 additional rinses are made at the end of the washing programme.
To activate the extra-rinse function, press the
button until the symbol displaying the
desired number of rinses is shown on the information screen.
51
T: 0333 577 7232
T: 0333 577 7232
52
USAGE
Anti-Allergic Function: This additional rinse operation will carry out all rinsing steps
in hot water. We recommend using this on laundry worn on delicate skin such as baby
clothes.
Delay Time/Finish Time Function: This allows you to either delay the start time
of the selected programme or specify the finish time of the programme.
Please ensure that the current time is correctly set before using this function.
To activate this function, press the
button until the
symbol appears on the screen.
Press the
Easy Ironing Function: Using this function will result in your laundry being less
crinkled at the end of the selected programme.
To activate this function, press the
button to access this function.
The current time will be shown on the information screen for 3 seconds before the delay
time/finish time screen is displayed (fig 21).
button.
Economic Time Interval Function: Before activating this function please
ensure that you have carried out the Eco Time Setting as described on page 23.
Press the
button to activate the Eco Time function. The
displayed on the information screen.
symbol will be
The
will be displayed on the information screen until Eco Time is switched off. To
button.
switch off Eco Time, press the
If you wish to run the selected programme while the Eco Time function is active, press
button. The start of the programme will be delayed until the start of the Eco
the
Time interval. The programme start time and duration will be displayed alternately on the
information screen.
If you do not wish to run the selected programme between the Eco Time hours, press
button again. ‘eco time is cancelled’ will be displayed on the information screen.
the
Your Washer Dryer will return to the main programme screen in 3 seconds. To start the
button.
programme, press the
53
T: 0333 577 7232
Figure 21
You can increase or decrease the delay or finish time in 10 minute intervals by using the
or buttons.
Press the
button to set the delay and finish times.
Please Note: If you change the delay time, the finish time will automatically be updated.
Alternatively, if you change the finish time, the delay time will automatically be updated.
T: 0333 577 7232
54
USAGE
Selecting a Sub-Programme
To give you further options, your Washer Dryer contains several sub-programmes. The following
programmes have sub-programme options:
When you select the ‘extras’ programme, you will have 6 sub-programme options to choose
from:
Synthetics.
Delicates.
Extras.
Synthetics wash & dry: This option is used for synthetic and synthetic mix textiles (synthetic
content shirt, blouse, socks etc).
When you select the ‘Synthetics’ programme, you will have 2 sub-programme options to choose
from:
Synthetics.
Curtain.
Select the desired option by using the and buttons.
You can activate the programme you want to select by touching the
button.
When you select the ‘Delicates‘ programme, wou will have 2 sub programmes options to choose
from:
Wool.
Silk.
55
T: 0333 577 7232
Refresh: This is not a washing programme. It simply breathes hot air into your laundry
refreshing it.
Rinse: This option is suitable for all types of laundry and provides an extra rinse to your laundry
after the washing process has taken place.
After your selection has been activated the information screen will return to the main
programme screen. You can select any other required features before running the programme by
button to begin the programme.
using the available information screen buttons. Press the
Select the desired option by using the and buttons.
You can activate the programme you want to select by touching the
After your selection has been activated the information screen will return to the main
programme screen. You can select any other required features before running the programme by
using the available information screen buttons. Press the
button to begin the programme.
Spin: This is a useful programme to use when extra spinning is required. We do not recommend
this programme for delicate or wollen laundry.
Drain: This programme drains the water from your Washer Dryer.
Drum Clean: This is a drum clean programme and must be run without any laundry in the
drum. When running this programme pour half a measuring cup of all-purpose detergent into
compartment II of the detergent drawer.
button. You can then use the information
To activate the chosen sub-programme, press the
button to begin
screen buttons to select and other available settings you require. Press the
the programme.
button.
For full features and options for each sub programme please refer to the programme tables on
pages 37 to 48.
T: 0333 577 7232
56
USAGE
Memory Record Function
This feature allows you to store your preferred washing, drying and additional function settings
so that you can easily use them again:
Select the settings that you wish to store and press the ‘MEMORY’ button.
‘Save as Memory’ will be displayed on the information screen (fig 22).
To recall saved programme settings at a later time:
Turn the programme dial to ‘MEMORY’.
Press the
button to start the programme.
You can change the setting stored in a memory location:
Select the settings you wish to save and press the ‘MEMORY’ button.
‘Overwrite on memory’ will be displayed.
Press the
button to store the new settings, or to cancel and return to the main
programme page.
‘Saved as memory’ will be displayed to confirm that the new settings have been stored.
Starting a Programme
Figure 22
Please Note: You can still make changes to your chosen settings at this point. Press the
button, change the settings to those that you require and press the ‘MEMORY’ button.
Once you are happy with your chosen settings, press the button.
After approximately 5 seconds ‘Saved as memory’ will be displayed on the information
screen.
Your Washer Dryer will then return to the main programme screen.
To start the saved washing programme, press the
button, or select another programme.
To start the selected programme, press the
button. The programme you have selected
will be displayed on the screen. The information screen will display the current stage of the
programme such as ‘washing’, ‘rinse’, ‘spin’, ‘drying’ or ‘end’.
symbol indicates that the programme has finished and the door is unlocked.
‘end’ with the
It is now safe to remove your laundry.
Pausing a Programme and Adding Extra Laundry
You can use the
button to pause or re-start the selected programme. This function is useful
when you wish to add extra laundry to your Washer Dryer.
If the
symbol is displayed on the information screen, you can open the door to add
extra laundry when the programme has been paused.
If the
symbol is displayed on the information screen, your Washer Dryer has
progressed too far into the selected programme to add laundry.
57
T: 0333 577 7232
T: 0333 577 7232
58
USAGE
Cancelling a Programme
To cancel a running programme at any time:
Turn the programme dial to the STOP position. Your Washer Dryer will stop the current
programme.
Turn the programme dial to any other programme setting to drain the Washer Dryer.
You can now select and run a new programme.
Programme End
Your Washer Dryer will automatically stop when the programme you have selected finishes. It is
symbol is displayed on the
safe to open the door and remove your laundry when ‘end’ the
information screen.
4
Check the drum and door seal for any small articles that may have become dislodged.
5
Leave the door open for a short time to allow the interior of your Washer Dryer to dry. Check
the drum is dry and empty before closing the door.
Child Lock
Your Washer Dryer is equipped with a child lock to prevent accidental operation.
To activate the child lock, press the 2 buttons shown in fig 23 simultaneously for a minimum
of 3 seconds.
Please Note: Your Washer Dryer has a stage that cools down your laundry at the end of its
drying operation. This is to reduce the risk of you being harmed as you remove the laundry from
your Washer Dryer.
1 Child Lock Buttons
Removing Your Laundry:
1
Wait for the selected programme to finish. This is indicated by ‘end’ and the
of the information screen.
1
symbol
2
Pull the door handle forwards and open the door fully.
3
Remove your laundry; check that all items have been removed from the drum. Any items left
in the drum could discolour items in the next wash or become discoloured themselves.
59
T: 0333 577 7232
Figure 23
If you have successfully selected child lock
the information screen.
and ‘keylock activated’ will be displayed on
T: 0333 577 7232
60
USAGE
MAINTENANCE
If you press a button while the child lock is active, the button will have no effect and ‘to unlock
press for 3s’ will be displayed on the information screen. If the child lock is active and the
programme dial is switched to STOP and another programme selected, the previously selected
programme will continue from the point where it was stopped. No change will take place.
GENERAL MAINTENANCE
To deactivate child lock, press the child lock buttons for a minimum of 3 seconds. ‘keylock
deactivated’ will be displayed on the information screen. Please be aware that child lock is
automatically deactivated once a programme ends.
Please Note: Child lock does not lock the pump cover or detergent drawer of your Washer
Dryer.
From time to time it may be necessary to carry out some routine maintenance of your Washer
Dryer to ensure that it operates as intended. Before cleaning your Washer Dryer:
1
Turn your mains power supply off and remove the plug from the socket.
2
Turn off the cold water supply.
CAUTION: Do not use solvents, abrasive cleaners, glass cleaners or all-purpose cleaning
Power Supply Failure:
If a power cut should occur while a programme is running, the programme will continue from
the same point once power is restored. This will not cause any harm to your Washer Dryer or
laundry. During a power cut, the door lock mechanism will release after 2 minutes. Do not open
the door if there is water in your machine. If you wish to collect your laundry, drain your Washer
Dryer first. Page 65 contains instructions on how to drain your machine.
agents to clean your Washer Dryer. They may damage the plastic surfaces and other
components with the chemicals they contain.
External Casing:
Use a mild, non-abrasive cleaning agent, or soap and water, to clean the external casing.
Wipe dry with a soft cloth.
The Drum:
Use a suitable stainless steel cleaning agent to clean the drum. Follow the manufacturer’s
advice on the cleaning agent’s packaging.
Extra Cleaning:
Deposits may build up in your Washer Dryer when washing is mainly carried out at low
temperatures. To prevent these deposits from building up, carry out a hot wash (70°C
or above) once every 6 weeks. If you have no reason to wash occasionally at this high
temperature, run a high temperature cottons programme with detergent but no laundry at
regular intervals.
61
T: 0333 577 7232
T: 0333 577 7232
62
MAINTENANCE
Filters:
Water Inlet Filters:
Water inlet filters prevent dirt and foreign materials from entering your machine. It is
recommended that these filters are cleaned when your machine is unable to receive sufficient
water, although your water supply is on and the tap is open.
To clean the water inlet filters:
1
2
Unscrew the water inlet hose from the Washer Dryer by turning the hose anti-clockwise
and gently pulling.
To remove the water inlet filter from the water inlet valve, use a pair of long-nosed pliers to
gently pull on the plastic bar in the filter (fig 24).
3
Clean the filter thoroughly with a soft brush, wash with soapy water and rinse thoroughly.
4
Re-insert the filter by gently pushing it back into place.
A second water inlet filter is located in the tap end of the water inlet hose.
To remove the second water inlet filter:
1
Use a pair of long-nosed pliers to gently pull on the plastic bar in the filter.
2
Clean the filter thoroughly with a soft brush and wash with soapy water and rinse
thoroughly.
3
Re-insert the filter by gently pushing it back into place.
Pump Filter:
The pump filter system in your Washer Dryer prolongs the life of the pump by preventing lint
from entering your machine. We recommend that you clean the pump filter every 2-3 months.
The pump filter is located behind the cover on the front lower-right corner.
CAUTION: The water in the pump may be hot, wait for it cool before carrying out any
cleaning or maintenance.
Figure 24
63
T: 0333 577 7232
T: 0333 577 7232
64
MAINTENANCE
Cleaning the Pump Filter:
3
Remove any foreign materials from the filter with a soft brush.
1
4
Move the pump by hand to check that it rotates freely.
5
Clean the pump with a soft brush.
2
3
Before opening the filter cover, place a container under it, ready to collect any water left in
the Washer Dryer.
Place the corner of the liquid detergent level plate (or a similar item such as a screwdriver)
into the groove on the pump filter cover and pull forwards to remove the pump filter cover.
Gently unclip and pull out the black rubber hose. Pull off the cap and allow any water to
drain into the container.
4
Once the water has drained, push the cap back on the end of the hose and clip the hose
back into position.
3
Loosen the pump filter by turning anti-clockwise and remove by pulling. Wait for any water
to drain into the container.
After Cleaning:
1
Re-fit the filter by inserting it and turning clockwise.
2
Close the filter cover.
DETERGENT DRAWER
The use of detergent may cause residual build up in the detergent drawer over time. Remove the
drawer at regular intervals to clean the accumulated residue. To remove the detergent drawer:
a:
b:
1
Pull the drawer forwards until it is fully extended.
2
Press down on the release catch (fig 26) and pull the drawer from its housing.
3
Clean the drawer with water and a soft brush.
4
If there is any residue in the drawer housing, remove with a soft brush. Take care to prevent
any residue from dropping into the machine.
Figure 25
65
T: 0333 577 7232
T: 0333 577 7232
66
MAINTENANCE
To replace the drawer:
5
SIPHON PLUG
Dry it thoroughly and slide it back into the housing.
1
Release Catch
1
The siphon plug is located in the
compartment of the detergent drawer. Remove the
detergent drawer fully and unclip the
compartment cover as shown in fig 27. Remove the
siphon plug by pulling upwards.
1
Clean the plug with a soft brush and replace, checking that it is firmly in position.
2
Replace the
compartment cover and slide the detergent drawer back into the housing.
Figure 26
Figure 27
67
T: 0333 577 7232
T: 0333 577 7232
68
CLOTHING CARE
GENERAL WASHING INSTRUCTIONS
When selecting your washing programme take care to note any instructions displayed on the
international washing signs in your garments and textiles.
Leave on a Flat Surface
Washing Temperature
Medium Hot Iron
Do not Tumble Dry
69
T: 0333 577 7232
Do not Wash
Medium Hot Iron
Hang to Dry
Lukewarm Iron
Do not Iron
Low Temperature
Do not Bleach
Can be Bleached in Cold Water
Dry in a Normal Temperature Dryer
These letters are used to instruct professional cleaners as to which type of solvent to use. Do
not wash garments with these symbols in your Washer Dryer unless the label says otherwise.
Drip Dry
T: 0333 577 7232
70
CLOTHING CARE
STAIN REMOVAL INFORMATION
If can often be hard to know the best way to treat a stubborn stain. To help with this we’ve
provided you with a few tips on dealing with the most common types before running your wash
cycle.
Alcohol:
Wash the stain in cold water, wipe with glycerine and water and rinse with water mixed with
vinegar.
Shoe Polish:
Scratch out the stain taking care not to damage the material, rub with detergent and rinse.
Tea and Coffee:
Stretch the area containing the stain and pour on hot water.
Chocolate and Cocoa:
Leave your clothes in cold water and rub with soap or detergent, then wash at a high
temperature.
Tomato Paste:
Scrape away the dried pieces, leave in cold water for around 30 minutes and hand wash by
rubbing with detergent.
Egg:
Scrape away the dried pieces, clean the stained area with a cold wet cloth or sponge and rub
with detergent to wash.
Mustard:
Apply glycerine to the stained area, rub with detergent and hand wash.
Blood:
Soak your clothes in cold water for around 30 minutes and then hand wash.
Cream, Ice Cream and Milk
Soak your clothes in cold water and rub the stained area with detergent.
Mould:
Clean the stained area as soon as possible and hand wash with detergent.
Ink:
Hold the stained area under cold water and wait until the inky water completely runs off. Rub
the stain with water and diluted lemon juice, wait 5 minutes before beginning the wash cycle.
Fruit:
Stretch the stained area and pour on cold water, apply glycerine and wipe. Wait for 1-2 hours
and rinse after wiping with a few drops of white vinegar.
Grass:
Rub the stained area with detergent before washing.
Oil-Based Paint:
Apply paint thinner to the stained area before it dries, then rub the area with detergent and
wash.
Grease and Oil:
Rub the stain with detergent and then wash in lukewarm soapy water.
71
T: 0333 577 7232
T: 0333 577 7232
72
TROUBLESHOOTING
TROUBLESHOOTING INFORMATION
If your Washer Dryer is not operating as expected, you may find a simple solution listed in the
table below.
If your Washer Dryer has developed a fault not covered in this manual, please contact Servis.
Fault
Possible Cause
Solution
Your Washer Dryer does not
operate.
It is switched off at the
mains.
Check that your Washer
Dryer is plugged in and
turned on at the mains.
The programme dial is in the
off position.
Use the programme dial
to select the desired
programme.
The door is not shut properly.
Check that the door ‘clicks’
and ‘Beeps’ shut.
Your Washer Dryer does not
receive water.
73
T: 0333 577 7232
The cold water supply tap
is off.
Check that the cold water
supply tap is fully turned on.
The water fill hose is bent,
twisted, kinked or trapped.
Check that there are no
bends, twists or kinks and
that the fill hose is not
trapped.
The door is not closed
properly.
Close the door.
Fault
Possible Cause
Solution
Your Washer Dryer does not
receive water.
The water inlet filters are
blocked.
Clean the water inlet filters.
See page 63 for detailed
instructions.
Your Washer Dryer is not
draining water.
The drain hose is bent,
twisted, kinked or trapped.
Check the drain hose and
straighten out any kinks,
twists or bends.
The pump filter is obstructed. Clean the pump filter.
See page 65 for detailed
instructions.
Your laundry is too tightly
packed together in the drum.
Check that your laundry is
spread out.
Your Washer Dryer is
vibrating.
The feet of your machine are
not correctly adjusted
The transit bolts are not
removed.
Adjust the feet. See page 13
for further information
Remove the transit bolts.
See page 11 for further
information.
There is excessive foam in
the detergent drawer.
button. To
Too much detergent has been Press the
stop the foam, dilute one
used.
tablespoon of softener into
1/2 litre of water and pour
into the detergent drawer.
button after
Press the
5-10 mins.
T: 0333 577 7232
74
TROUBLESHOOTING
Fault
Possible Cause
Solution
Fault
Possible Cause
Solution
There is excessive foam in
the detergent drawer.
The wrong detergent has
been used.
Only use detergents produced
for automatic Washer Dryers.
The washing result is not as
expected.
Your laundry is too dirty
for the programme you’ve
selected.
Use the information on pages
37 and 48 to select the most
appropriate programme.
There load detection system
on the screen does not work
when loading the machine.
Laundry is placed in the
Washer Dryer without
choosing a washing or drying
programme.
Remove the laundry from
your Washer Dryer. Switch
the programme dial to
STOP, reselect the desired
programme. Load the laundry
in the machine and run.
Not enough detergent used.
Use the amount of detergent
as instructed on the
packaging.
is displayed on the
information screen and your
Washer Dryer does not run.
Check that the maximum
capacity of your Washer
Dryer is not exceeded. See
pages 28 and 29 for more
information.
There is more laundry
in the machine than the
maximum laundry amount
for the washing and drying
programme selected.
Laundry remains damp after
the drying operation.
The appropriate drying
programme is not selected.
There is too much laundry in
your Washer Dryer.
The water from the Washer
Dryer is drained as soon as it
is filled.
The end of the water drain
hose may be too low.
Check that the drain hose is
at a suitable height. See page
15 for more information.
The spin cycle does not take
place.
The in-built sensor has
prevented your Washer Dryer
from operating with an out of
balance load.
Avoid small wash loads
containing items that could
become heavy through water
absorption.
75
T: 0333 577 7232
The maximum load capacity
for the selected programme
might be exceeded.
Remove laundry from your
Washer Dryer until the
disappears.
Select a drying programme
appropriate for your
laundry. Please refer to the
programme tables on pages
37 to 48.
T: 0333 577 7232
76
TROUBLESHOOTING
AUTOMATIC DETECTION SYSTEM
Your Washer Dryer is equipped with a built-in fault detection system, which is able to offer
guidance should your machine not operate as expected. The most common error codes are
shown below. If your machine displays a code not shown, contact Servis.
Possible Fault: No water supply or low mains water pressure
Solution: Check that the water supply is turned on, Check that the inlet hose is not kinked
or twisted, Clean the inlet hose and filters.
If the problem persists, unplug your Washer Dryer, turn off your water supply and contact
Servis.
Possible Fault: Pump is damaged, pump filter is clogged or the electrical pump connection
is malfunctioning.
Solution: Clean the pump filter. Contact Servis if the problem persists.
Possible Fault: The pump is damaged, the pump filter is clogged or the electrical pump
connection is malfunctioning.
Solution: clean the pump filter, check the drain hose for kinks and twists. If the problem
persists contact Servis.
Possible Fault: Your Washer Dryer has an excessive amount of water.
Solution: Turn off your Washer Dryer unplug it and contact Servis.
77
T: 0333 577 7232
T: 0333 577 7232
78
TROUBLESHOOTING
DISPOSAL OF YOUR OLD MACHINE
All packaging and materials used are environmentally friendly and recyclable. Please dispose
of any packaging in an environmentally friendly manner. Consult your local council for further
details.
To ensure safety when disposing of an old machine, cut off the main power supply cable and
break the door hinges or lock.
Please refer to the rear cover for disposal instructions.
Possible Fault: The mains voltage is too high or low.
Solution: Contact Servis.
GUARANTEE
The Servis guarantee covers the cost of parts/labour/call out charges to repair an appliance
should any covered component fail in its normal functions necessitating a repair or replacement
to resume those functions.
The Servis guarantee does not cover:
Possible Fault: The door of your Washer Dryer is left open.
Solution: Close the door . If the error code is still displayed turn off your Washer Dryer,
unplug it and contact Servis.
79
T: 0333 577 7232
Accidental damage.
Use in a commercial environment.
Incorrect or faulty installation.
Deliberate damage or neglect.
Repairs to cosmetic parts.
Damage caused by foreign objects or substances.
Claims in respect to routine inspection or maintenance.
T: 0333 577 7232
80
GUARANTEE
The Servis guarantee is not transferable.
For your Servis guarantee to be valid, you will need to retain your original purchase
receipt and be able to provide it when you make a claim.
The above summary does not include all of the terms and conditions and exclusions which can
be found on our website www.servis.co.uk.
KNOW YOUR RIGHTS
Household contents insurance
Your household insurance may cover you for accidental damage, fire or theft of your product.
Data Protection Act (1988)
Please note that any information provided will be processed by us or our agents in compliance
with the provisions of the Data Protection Act 1988, for the purpose or providing cover and
handling claims, if any, which may necessitate providing such information to third parties.
81
T: 0333 577 7232
T: 0333 577 7232
82
INDEX
E
A
Adding detergent ..........................................29
Additional functions ......................................51
Adjusting the feet...........................................13
Anti-Allergic function .................................. 53
C
Easy Ironing function ................................ ...53
Economic Time Interval function................. 53
Economic Time Interval setting....................23
Electrical connection.....................................18
Extra rinse .....................................................52
Language selection setting ..........................22
Liquid starch ..................................................32
Loading the drum ..........................................28
M
Memory Record function ..............................57
Cancelling a programme ...............................59
Child lock........................................................60
Cleaning .........................................................62
Connection, drain hose .................................15
Connection, electrical ...................................18
Connection, water supply .............................14
Control panel .................................................19
Cupboard dry ................................................ 33
Current time setting ......................................20
D
Delay Time/Finish Time function ................ 54
Detergent drawer..........................................09
Disposal .........................................................80
Drain hose connection ............................... ...15
Drying with Duration function..................... 34
Drying your washing .................................... 33
T: 0333 577 7232
S
Sorting your laundry......................................28
Sound adjustment .........................................24
Spin selection ............................................... 50
Stain removal information ............................71
Starting a programme.................................. 58
Sub programmes ...........................................55
F
P
Fabric conditioner..........................................32
Factory settings ............................................26
Feet, adjustment ...........................................13
Filters ............................................................ 63
First wash ......................................................27
G
General maintenance....................................62
General washing Instructions ......................69
Guarantee ......................................................80
H
Pausing a programme .................................. 58
Power supply failure .....................................61
R
Powerdry technology ......................................1
Pre-wash........................................................51
Programme end .............................................59
Programme modes ........................................37
Pump filter .....................................................65
R
T
Technical specification .................................10
Temperature selection ..................................49
Troubleshooting information ........................73
W
Warranty........................................................01
Water inlet filter............................................62
Water softner ................................................31
Water supply connection..............................14
Removal of transit bolts................................11
Removing your laundry .................................59
Hanger dry .................................................... 33
S
I
Installation requirements..............................11
Iron dry .......................................................... 33
Items included ...............................................02
83
LP
Safety instructions........................................02
Screen brightness .........................................24
Selecting a programme ................................32
Setting up your washer dryer .......................20
Siphon plug ....................................................68
Smart Touch buttons.....................................20
T: 0333 577 7232
84
T: 0333 577 7232
E: info@servis.co.uk
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection
point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for
the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this
product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
0000000000