Vizio XVT472SV User manual

VIZIO SV420XVT1A User Manual
Dear VIZIO Customer,
Congratulations on your new VIZIO SV420XVT1A
LCD Television purchase. Thank you for your
support. For maximum benefit of your set, please
read these instructions before making any
adjustments, and retain them for future reference.
We hope you will experience many years of
enjoyment from your new VIZIO SV420XVT1A
Television.
For assistance, please call (877) 698-4946 or email us at techsupport@vizio.com.
To purchase or inquire about accessories and
installation services for your VIZIO LCD HDTV,
please visit our website at www.vizio.com or call
toll free at 888-VIZIOCE (888-849-4623).
We recommend you register your VIZIO
SV420XVT1A TV either at our website
www.vizio.com or fill in your registration card
and mail it in. For peace of mind and to protect
your investment beyond the standard warranty,
VIZIO offers on-site extended warranty service
plans. These plans give additional coverage
during the standard warranty period. Visit our
website or call us to purchase a plan.
Write down the serial number located on the back
of your SV420XVT1A.__ __ __ __ __ __ __ __ __
__ __ __ __ __
Purchase Date _____________________
VIZIO is a registered trademark of VIZIO, Inc. dba V, Inc.
HDMI logo and “High Definition Multimedia Interface” are
registered trademarks of HDMI Licensing LLC.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
TruSurround, SRS and the symbol are trademarks of SRS Labs, Inc
THE TRADEMARKS SHOWN HEREIN ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS; IMAGES USED ARE FOR
ILLUSTRATION PURPOSES ONLY. BRAVO, VIZIO AND THE V LOGO AND WHERE VISION MEETS VALUE AND OTHER
VIZIO TRADEMARKS ARE THE INTELLECTUAL PROPERTY OF VIZIO INC. PRODUCT SPECIFICATIONS ARE SUBJECT TO
CHANGE WITHOUT NOTICE OR OBLIGATION. © 2008 VIZIO INC. ALL RIGHTS RESERVED.
Version 6/2/2008
1
www.VIZIO.com
VIZIO SV420XVT1A User Manual
Important Safety Instructions
This product is designed and manufactured to operate within defined design limits, and misuse
may result in electric shock or fire. To prevent the product from being damaged, the following
rules should be observed for the installation, use and maintenance of the product. Read the
following safety instructions before operating the display. Keep these instructions in a safe place
for future reference.
•
•
•
•
•
•
•
•
•
•
•
To reduce the risk of electric shock or component damage, switch off the power before connecting other components to the
SV420XVT1A.
Unplug the power cord before cleaning the SV420XVT1A LCD. A damp cloth is sufficient for cleaning the SV420XVT1A. Do not use a
liquid or a spray cleaner for cleaning the product. Do not use abrasive cleaners.
Always use the accessories recommended by the manufacturer to insure compatibility.
When moving the SV420XVT1A from an area of low temperature to an area of high temperature, condensation may form on the
housing. Do not turn on the SV420XVT1A immediately after this to avoid causing fire, electric shock or component damage.
Do not place the SV420XVT1A on an unstable cart, stand, or table. If the SV420XVT1A falls, it can injure a person and cause serious
damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the SV420XVT1A.
A distance of at least 3 feet should be maintained between the SV420XVT1A and any heat source, i.e. radiator, heater, oven, amplifier
etc. Do not install the product close to smoke. Operating the product close to smoke or moisture may cause fire or electric shock.
Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the SV420XVT1A
and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the SV420XVT1A in a bookcase or
cabinet unless proper ventilation is provided.
Never push any object into the slot on the SV420XVT1A cabinet. Do not place any objects on the top of the product. It could short
circuit parts causing a fire or electric shock. Never spill liquids on the SV420XVT1A.
The SV420XVT1A should be operated only from the type of power source indicated on the label. If you are not sure of the type of
power supplied to your home, consult your dealer or local power company.
The power cable must be replaced when using different voltage from that specified in the User Manual. For more information, contact
your dealer.
The SV420XVT1A is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a
grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug,
have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do
not defeat the safety purpose of the grounded plug.
•
•
Appliance inlet (or AC inlet) is used as the disconnect device.
Use only with the cart, stand, tripod, bracket or table specified by manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
The lightning flash with arrowhead symbol , within an equilateral triangle, is intended to alert the user to the
presence of not isolated dangerous voltage within the inside of the product that may be sufficient magnitude to
constitute a risk of electric shock to persons.
•
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and servicing instructions in the literature
accompanying the appliance.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
The wall socket shall be installed near the equipment and shall be easily accessible.
Only the marked power source can be used for the product. Any power source other than the specified
one may cause fire or electric shock.
Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.
Unplug the unit during a lightening storm or when it will not be used for long period of time. This will protect the SV420XVT1A from
damage due to power surges.
Do not attempt to repair or service the product yourself. Opening or removing the back cover may expose you to high voltages, the risk
of electric shock, and other hazards. If repair is required, please contact your dealer and refer all servicing to qualified service personnel.
Keep the product away from moisture. Do not expose this appliance to rain or moisture. If water penetrates into the product, unplug
the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.
Do not use the product if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your
dealer immediately. Do not try to repair the product yourself.
Avoid using dropped or damaged appliances. If the product is dropped and the housing is damaged, the internal components may
function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of the product may cause
fire or electric shock.
Do not install the product in an area with heavy dust or high humidity. Operating the product in environments with heavy dust or high
humidity may cause fire or electric shock.
Follow instructions for moving the product. Ensure that the power connector and any other cables are unplugged before moving the
product.
Hold the power connector when removing the power cable. Pulling the power cable itself may damage the wires inside the cable and
cause fire or electric shock. When the product will not be used for an extended period of time, unplug the power connector.
To reduce risk of electric shock, do not touch the connector with wet hands.
Version 6/2/2008
2
www.VIZIO.com
VIZIO SV420XVT1A User Manual
•
•
•
Insert batteries in accordance with instructions. Incorrect polarities may cause damage and leakage of the batteries, operator injury
and contamination the remote controller.
If any of the following occurs please contact the dealer:
o
The power connector fails or frays.
o
Liquid sprays or any object drops into the SV420XVT1A.
o
The Display is exposed to rain or other moisture.
o
The Display is dropped or damaged in any way.
o
The performance of the Display changes substantially.
Operating environment. Temperature: 40˚F ~ 95˚F, Humidity: 20% ~ 80% non-condensing, Altitude: 0 ~ 6500ft (0 ~ 2000m)
Television Antenna Connection Protection
External Television Antenna Grounding
If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the
antenna or cable system is electrically grounded to provide some protection against voltage surges and
static charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper
grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge
unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding
electrodes, and requirements of the grounding electrode.
Lightning Protection
For added protection of the TV during a
lightning storm or when it is left
unattended or unused for long periods
of time, unplug the TV from the wall
outlet and disconnect the antenna or
cable system.
Power Lines
Do not locate the antenna near
overhead light or power circuits, or
where it could fall into such power lines
or circuits.
Remember, the screen of the coaxial cable is intended to be connected to earth in the building
installation.
FCC Bulletin for New TV Owners
After February 17, 2009, a television receiver with only an analog broadcast tuner will require a
converter box to receive full power over-the-air broadcasts with an antenna because of the
Nation's transition to digital broadcasting. Analog-only TVs should continue to work as before to
receive low power, Class A or translator television stations and with cable and satellite TV
services, gaming consoles, VCRs, DVD players, and similar products.
Information about the DTV transition is available from http://www.DTV.gov or this manufacturer at
877 MY VIZIO (877-698-4946), and from http:/ /www.dtv2009.gov or 1-888-DTV-2009 for information
about subsidized coupons for digital-to-analog converter boxes.
Your VIZIO TV comes with a built-in tuner capable of processing digital broadcasts, making it
easier for you, the end user, to receive this type of signal without the need of an extra converter
box.
Version 6/2/2008
3
www.VIZIO.com
VIZIO SV420XVT1A User Manual
Opening the Package
Your VIZIO SV420XVT1A and it accompanying accessories are carefully packed in a cardboard carton
that has been designed to protect it from transportation damage. Now you have opened the carton check
that the SV420XVT1A is in good condition and that all of the accessories are included.
The SV420XVT1A weighs approximately 47lbs and about 40” wide x 27” tall we strongly advise that you
have at least 2 people to unpack and install the HDTV.
The glass surface can easily be scratched or broken so please handle the product gently and never place
the HDTV with the glass facing downwards on a surface without protective padding.
IMPORTANT: Save the carton and packing material for future shipping.
Package Contents
VIZIO SV420XVT1A
VIZIO Remote Control VUR9
HDMI Cable
Power Cord
Safety Strap
VIZIO Bezel and Screen Cleaning Cloth
This User Manual
Quick Setup Guide
Registration Card
VIP Services Brochure
2 AAA Batteries for the Remote Control
IMPORTANT: Do not apply pressure or throw any object into the screen display area which may
compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse
or improper installations.
Version 6/2/2008
4
www.VIZIO.com
VIZIO SV420XVT1A User Manual
Additional Certified Accessories for the VIZIO
SV420XVT1A are sold separately
Wall Mounts
High Definition Cables
Extra or replacement Remote
VIZIO also offers Installation Services and Extended Warranty Services for your VIZIO SV420XVT1A
To purchase or inquire about additional accessories and services for your VIZIO product, visit our web
site at www.vizio.com or call us toll free at 888-VIZIOCE (888-849-4623)
Installation Preparation
Please read this user manual carefully before installing your VIZIO HDTV.
The power consumption of the TV is about 400W; please use the power cord designated for TV. When
an extension cord is required, use one with the correct power rating. The cord must be grounded and the
grounding feature must not be defeated.
The TV should be installed on a flat surface to avoid tipping. For proper ventilation, you must allow space
between the back of the TV and the wall. If you would like to mount your TV on the wall, please see
below ‘Preparing Your LCD HDTV for Wall Mounting’ for additional information. Avoid installing the TV in
places with high humidity, dust or smoke so as not to shorten the service life of the electronic components.
Install the TV in landscape orientation; any 90˚ clockwise or counter-clockwise installation may induce
poor ventilation and excessive component damage.
VIZIO offers professional installation services. Please contact VIZIO for more information on these
services at 888-VIZIOCE (888-849-4623) or www.vizio.com.
Attaching the Safety Strap
For when the SV420XVT1A is not mounted on the wall with a Wall Mount, a Safety Strap has been
included to attach the HDTV to the wall to reduce the chance of the HDTV being pulled over. The Safety
Strap should be used with common sense practice such as ensuring that children (or adults) do not climb
up, grabbing the top of the HDTV and pulling it onto themselves.
1.
Fix one end of the strap to the wall. If you have a drywall
finish it is preferable to fix it to a stud, using a washer
underneath the screw head. If you have a solid wall you
should use a lag bolt, again using a washer under the nut.
2.
Fix the other end of the Safety
Strap to one of the upper wall
mounting holes on the back of
the HDTV, using a washer
under the screw head.
Version 6/2/2008
5
www.VIZIO.com
VIZIO SV420XVT1A User Manual
Preparing Your LCD HDTV for Wall Mounting
The VIZIO SV420XVT1A can either be kept on the stand base or mounted on the wall for viewing. If you
choose to mount the SV420XVT1A on the wall, please follow the instructions below for removing the
stand base.
To remove the stand base
1. Unplug all of the cables and cords from your SV420XVT1A.
2. Place the SV420XVT1A face down on a soft
and flat surface (blanket, foam, cloth, etc) to
prevent any damage to the TV.
3. Remove the total of eight (8) screws holding
the base to the SV420XVT1A.
4. Carefully remove the stand base.
Now, the SV420XVT1A can fit securely to a mount (sold separately) by utilizing the mounting holes in the
center of the back panel of the TV. Please
make sure to read the instructions of your
specific mount to properly hang the
SV420XVT1A.
The pitch of the mounting holes is 600mm
horizontally and 200mm vertically.
The screw type required is metric M8,
1.25mm pitch. The length of the screws will
depend on the thickness plate being attach
to the TV set; our brackets come with
different length screws.
To find the perfect mount for the VIZIO SV420XVT1A, browse VIZIO’s certified mount selection at
www.VIZIO.com or call directly 888-VIZIOCE (888-849-4623).
Version 6/2/2008
6
www.VIZIO.com
VIZIO SV420XVT1A User Manual
Table of Contents
Chapter 1 Basic Controls and Connections ................................................................ 10
1.1 Front Bezel ........................................................................................................................................................10
1.2 Right Side Panel Controls .................................................................................................................................10
1.3 Rear Panel Connections ...................................................................................................................................11
1.4 Right-Side Panel Connection ............................................................................................................................12
1.5 VIZIO Universal Remote Control .......................................................................................................................13
1.5.1 Insertion of Batteries in the Remote Control ..............................................................................................16
1.5.2 Remote Control Range ..............................................................................................................................16
1.5.3 VIZIO Universal Remote Control Precautions ...........................................................................................16
Chapter 2 Connecting Equipment .................................................................................. 17
2.1 Which Video Connection Should I Use?............................................................................................................17
2.2 Connecting Your Cable or Satellite Box ............................................................................................................18
2.2.1 Using HDMI ...............................................................................................................................................18
2.2.2 Using Component Video............................................................................................................................20
2.3 Connecting Coaxial (RF) ...................................................................................................................................21
2.3.1 Using Your Antenna or Digital Cable for DTV............................................................................................21
2.3.2 Using Your Antenna or Cable for TV .........................................................................................................22
2.3.3 Using the Antenna or Cable through your VCR .........................................................................................22
2.4 Connecting Your DVD Player ............................................................................................................................23
2.4.1 Using HDMI ...............................................................................................................................................23
2.4.2 Using Component Video............................................................................................................................25
2.4.3 Using S-Video (AV1)..................................................................................................................................26
2.4.4 Using Composite (AV) Video .....................................................................................................................27
2.5 Connecting Your VCR or Video Camera ...........................................................................................................28
2.6 Connecting an external Receiver/Amp ..............................................................................................................29
2.6.1 Optical Output of Audio received with HD Programs .................................................................................29
2.7 Connecting a PC Computer ..............................................................................................................................30
2.7.1 Preset PC Resolutions...............................................................................................................................31
2.7.2 Resolution (1920x1080) through RGB (15-Pin VGA) Input........................................................................31
Chapter 3 Setting Up to Watch Television...................................................................32
3.1 Basic LCD HDTV Start Up ................................................................................................................................32
3.2 Watching a TV Program ....................................................................................................................................36
3.3 Adjusting Basic HDTV Settings .........................................................................................................................37
3.4 Program Information..........................................................................................................................................38
Chapter 4 Advanced Adjustment of HDTV................................................................... 39
4.1 Using the On Screen Display (OSD) .................................................................................................................39
4.2 DTV / TV Input Picture Adjustment....................................................................................................................40
4.2.1 Picture Mode .............................................................................................................................................40
4.2.2 Backlight ....................................................................................................................................................40
4.2.3 Brightness..................................................................................................................................................40
4.2.4 Contrast .....................................................................................................................................................41
4.2.5 Color ..........................................................................................................................................................41
4.2.6 Tint.............................................................................................................................................................41
4.2.7 Sharpness .................................................................................................................................................42
4.2.8 Advanced Video Features .........................................................................................................................42
4.2.9 Reset Picture Mode ...................................................................................................................................45
4.3 DTV / TV Audio Adjustment ..............................................................................................................................46
4.3.1 Audio Mode ...............................................................................................................................................46
4.3.2 Equalizer....................................................................................................................................................46
4.3.3 Balance......................................................................................................................................................46
4.3.4 Digital Audio Out........................................................................................................................................47
4.3.5 Speakers ...................................................................................................................................................47
4.3.6 Analog Audio Out ......................................................................................................................................47
4.3.7 Lip Sync.....................................................................................................................................................47
Added Audio (Sound) Features...............................................................................................................................48
4.3.8 Wireless Speaker ......................................................................................................................................48
4.3.9 Speaker Setting .........................................................................................................................................48
4.3.10 Wireless Surround Effect .........................................................................................................................50
4.3.11 Sound Effect ............................................................................................................................................50
Version 6/2/2008
7
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.3.12 DRC (Dynamic Range Compression) ......................................................................................................51
4.3.13 Reset Audio Mode ...................................................................................................................................51
4.4 DTV / TV Tuner Setup.......................................................................................................................................52
4.4.1 Tuner Mode ...............................................................................................................................................52
4.4.2 Auto Search...............................................................................................................................................52
4.4.3 Partial Channel Search..............................................................................................................................53
4.4.4 Skip Channel .............................................................................................................................................53
4.4.5 MTS ...........................................................................................................................................................53
4.4.6 Time Zone .................................................................................................................................................54
4.4.7 Daylight Saving..........................................................................................................................................54
4.5 DTV / TV Input Setup ........................................................................................................................................55
4.5.1 Language...................................................................................................................................................55
4.5.2 PIP (Picture-in-Picture) ..............................................................................................................................55
4.5.3 Sleep Timer ...............................................................................................................................................57
4.5.4 Wide ..........................................................................................................................................................57
4.5.5 Input Naming .............................................................................................................................................58
4.5.6 CC (Closed Caption)..................................................................................................................................59
4.5.7 H/V Position...............................................................................................................................................60
4.5.8 DTV / TV Input Parental Control ................................................................................................................61
4.5.9 Channel Block ...........................................................................................................................................62
4.5.10 US TV Rating...........................................................................................................................................62
4.5.11 US Movie Rating (For US) .......................................................................................................................63
4.5.12 Canadian English Rating .........................................................................................................................63
4.5.13 Canadian French Rating..........................................................................................................................64
4.5.14 Check for DTV Rating..............................................................................................................................64
4.5.15 Blocked Unrated Programming................................................................................................................65
4.5.16 Change the Password .............................................................................................................................65
4.5.17 Reset All Settings ....................................................................................................................................66
4.6 HDMI Input Picture Adjustment .........................................................................................................................67
4.7 HDMI Input Audio Adjustment ...........................................................................................................................67
4.8 HDMI Input Setup..............................................................................................................................................67
4.9 Video Input Picture Adjustment .........................................................................................................................68
4.10 Video Input Audio Adjustment .........................................................................................................................68
4.11 Video Input Setup............................................................................................................................................68
4.12 Auto Phase (for Component input) ..................................................................................................................69
4.13 Video Input Parental Control ...........................................................................................................................69
4.14 PC Input Picture Adjustment ...........................................................................................................................70
4.14.1 Auto Adjust ..............................................................................................................................................70
4.14.2 H. Position ...............................................................................................................................................70
4.14.3 V. Position ...............................................................................................................................................70
4.14.4 H-SIZE.....................................................................................................................................................71
4.14.5 V-SIZE .....................................................................................................................................................71
4.14.6 Fine Tune ................................................................................................................................................71
4.15 PC Input Audio Adjustment .............................................................................................................................72
4.16 PC Input Setup ................................................................................................................................................72
4.17 Understanding Viewing Features ....................................................................................................................73
4.17.1 Viewing Modes ........................................................................................................................................73
4.17.2 Picture-In-Picture (PIP) Mode..................................................................................................................74
4.17.3 Adjusting Basic PIP Settings ...................................................................................................................74
Programming the VIZIO Universal Remote Control ................................................................................................75
4.17.4 Programming for VCR .............................................................................................................................75
4.17.5 Programming for Cable Set-Top Box.......................................................................................................75
4.17.6 Programming for DVD Player ..................................................................................................................76
4.17.7 Searching for Component Codes ............................................................................................................76
4.18 Using a Cable or Satellite Remote ..................................................................................................................76
Chapter 5 Maintenance and Troubleshooting............................................................. 77
5.1 Maintenance......................................................................................................................................................77
5.2 Troubleshooting Guide ......................................................................................................................................77
5.3 Wireless Speakers System and TV Pairing.......................................................................................................79
5.4 Telephone & Technical Support ........................................................................................................................79
5.5 Compliance .......................................................................................................................................................80
5.6 FCC Class B Radio Interference Statement......................................................................................................80
Version 6/2/2008
8
www.VIZIO.com
VIZIO SV420XVT1A User Manual
Chapter 6 Miscellaneous Information ........................................................................... 81
6.1 Specifications ....................................................................................................................................................81
6.2 Glossary – Standard Definitions ........................................................................................................................82
6.3 Index .................................................................................................................................................................83
Component Program Codes....................................................................................................................................89
Version 6/2/2008
9
www.VIZIO.com
VIZIO SV420XVT1A User Manual
Chapter 1 Basic Controls and Connections
1.1 Front Bezel
POWER ‘VIZIO’ LIGHT– The VIZIO name lights white
when powered on and orange when powered off.
REMOTE CONTROL SENSOR – This is the window
through which all of the remote control signals pass to
the sensor. Point the remote control directly at this
window for the best response to the remote signal.
1.2 Right Side Panel Controls
POWER (
) – Switch the SV420XVT1A on by pressing the button once. Press the button again to
turn the SV420XVT1A off.
MENU – This button activates the On Screen Display (OSD). If a submenu is active, pressing this button will return to the previous menu level.
CHANNEL +/- – Use these buttons to step up or down the TV channels.
While the OSD is active, these buttons
function as up and down controls in the
OSD menus.
VOLUME +/- – Use these buttons to
increase or decrease to the speaker
volume. While the OSD is active, these
buttons function as left and right controls
in the OSD menus.
INPUT (ENTER) – Repeated pressing of
this buttons steps through the input
sources in the following sequence: TV,
AV1, AV2 (S-Video), Component 1,
Component 2, RGB, HDMI1, HDMI2,
HDMI3 and HDMI4. Once you have
stepped through the entire sequence, you
will return to the beginning.
Additionally, when the OSD is active, this
button confirms the menu function to be adjusted. When the OSD is not active, this button will show the
current input selections.
TX INPUT – This slot is used only when upgrading your TV to Dolby Digital 5.1wireless surround system.
Do not insert any object into the slot which may compromise the integrity and functionality of
your TV. The manufacturer’s warranty does not cover user abuse or improper use of this input.
Version 6/2/2008
10
www.VIZIO.com
VIZIO SV420XVT1A User Manual
1.3 Rear Panel Connections
4
1
2
3
5
6
1.
8
7
9
10
SERVICE – This custom communication port is for factory service only. Use of this input
for any purpose other than factory authorized service will void the manufacturer’s
warranty of this equipment.
2.
HDMI 1 – Connect the primary source for digital video such as a DVD multimedia player or
set top box through this all digital connector. The white color band on the rear of the TV
indicates this connection.
3.
HDMI 2 – Connect a secondary source for digital video such as a DVD multimedia player or
set top box through this all digital connector. The white color band on the rear of the TV
indicates this connection. For users who want to connect to a DVI enabled device, use a
DVI-HDMI cable and connect the Analog Audio output of the device to the L+R AUDIO here.
Your VIZIO Certified HDMI and HDMI-DVI cables are available for purchase from
www.VIZIO.com or by calling 888-VIZIOCE (888-849-4623).
4.
RGB PC – Connect the video and audio from a computer here. The blue color band on the
rear of the TV indicates this connection. A cable with a 1/8” mini plug stereo connector at
the end connecting to the TV is needed if sound is also transmitted with this signal.
5.
COMPONENT 1 (YPb/CbPr/Cr with Audio L/R) – Connect the primary source for
component video devices such as a DVD Player or set top box here. From left to right, use
white for left audio and red for right audio, green for Y, blue for Pb (or Cb), and red for Pr (or
Cr) inputs. The green color band on the rear of the TV indicates this connection.
6.
AV1/S-VIDEO IN – Connect the primary source for composite video devices, such as a
VCR or video game. Use the white and red connectors to connect the external audio from
the same source. The yellow color band on the rear of the TV indicates this connection.
7.
OPTICAL AUDIO OUT – When the DTV input is selected for viewing, the audio associated
with the programming will be available on this SPDIF Optical connector for connection to
your home theatre system. The white color band on the rear of the TV indicates this
connection.
8.
ANALOG AUDIO OUT – Connect the audio from the LCD HDTV to an external device,
such as a home theatre system, external amplifier or stereo. Speakers can not be
connected directly to here. The white color band on the rear of the TV indicates this
connection.
9.
DTV/TV – Connect to an antenna or digital cable (no Cable Box) for Digital TV.*
10.
AC IN – Plug-in the supplied AC Power Cord here.
* For digital TV stations in your area visit www.antennaweb.org.
Version 6/2/2008
11
www.VIZIO.com
VIZIO SV420XVT1A User Manual
1.4 Right-Side Panel Connection
1. AV2 – Connect the secondary source for composite video devices,
such as a VCR or video game. Use the white and red connectors
to connect the external audio from the same source, and then use
1
the yellow connector to connect the external video from the same
source. Note: The red and white audio connectors are shared
between AV2 and COMPONENT2.
2. COMPONENT2 (YPb/CbPr/Cr with Audio L/R) - Connect the
secondary source for component video devices such as a DVD
Player or set top box here. From top to bottom, left to right, use
green for Y, blue for Pb (or Cb), red for Pr (or Cr), then connect
white for left audio and red for right audio inputs under the orange
band. Note: The red and white audio connectors are shared
between AV2 and COMPONENT2.
3. HDMI 3 - Connect the third source for digital video such as a DVD
multimedia player or set top box through this all digital connector.
2
4. HDMI 4 - Connect the fourth source for digital video such as a
DVD multimedia player or set top box through this all digital
connector.
3
4
The white color band on the side of the TV indicates this connection. Certified HDMI and HDMI-DVI
cables are available for purchase from www.VIZIO.com or by calling 888-VIZIOCE (888-849-4623)
Version 6/2/2008
12
www.VIZIO.com
VIZIO SV420XVT1A User Manual
1.5 VIZIO Universal Remote Control
The VIZIO Universal Remote Control is a comprehensive remote that can be
used to control up to four different components. The remote button functions are
explained on the following pages.
This button starts all programming of the Remote Control.
Press this button to turn the TV on from the Standby mode.
it again to return to the Standby mode.
Press
Repeated pressing of this button will switch between HDMI 1, HDMI 2,
HDMI 3 and HDMI 4 inputs.
Repeated pressing of this button will switch between Component 1
and Component 2 inputs
Repeated pressing of this button will switch between AV1 and AV2
inputs.
Press this button to select TV programming.
Use these buttons to select a channel or enter a password.
This button allows the user to cycle through the inputs.
This DASH button is for the DTV mode. When selecting a digital
channel directly use this button for the separation of main and subchannels. For example, channel 28-2 would be selected by the button sequence
2 8 DASH 2.
NOTE: This is a programmable remote supporting up to 4 devices (see TV, VCR, CABLE, DVD buttons
at the top of the remote). If the remote is not working with your VIZIO TV, press the TV button on the
remote to set the functions back to TV.
Version 6/2/2008
13
www.VIZIO.com
VIZIO SV420XVT1A User Manual
Use this button for the On-Screen Display (OSD) menus.
LAST – This button recalls the previously viewed channel.
Use the Navigation Wheel to operate the On-Screen
Display (OSD) after it has been activated by pressing the MENU button.
button to select your chosen option in On-Screen Display
Use the
(OSD) menus.
GUIDE – This button displays program information. Note: This
function is only available on DTV.
EXIT – This button exits the On-Screen Display (OSD) menus.
VOL (+ or -) – These buttons turn the volume up or down.
5.1 Surround Sound - This function is not available on this model
and pressing this button has no effect, unless wireless speaker system is
present.
MUTE – This button turns the sound on and off.
CH (+ or -) – These buttons change the channels up or down.
Version 6/2/2008
14
www.VIZIO.com
VIZIO SV420XVT1A User Manual
When CABLE is selected and the code to match your Cable (or Satellite) Box has been entered,
this button will operate the Cable (or Satellite) Box the same as this button on your Cable (or
Satellite) Remote. When TV is selected, this button activates Picture-in-Picture mode.
When CABLE is selected and the code to match your Cable (or
Satellite) Box has been entered, this button will operate the Cable
(or Satellite) Box the same as this button on your Cable Remote.
When TV is selected, press this button to select the size of the PIP screen
from one of the following: small, medium or large
When CABLE is selected and the code to match your Cable Box
(or Satellite) has been entered, this button will operate the Cable
Box (or Satellite) the same as this button on your Cable Remote (or
Satellite). When TV is selected, press the button to choose the PIP input.
Note: The TV must be in PIP mode for this button to be functional.
When CABLE is selected and the code to match your Cable Box (or
Satellite) has been entered, this button will operate the Cable Box
(or Satellite) the same as this button on your Cable Remote (or
Satellite). When TV is selected, this button is used to select the channels
within the PIP screen when DTV/TV is the PIP input selected
This button cycles through the available screen formats. The options
are Zoom, Panoramic, Normal and Wide.
Press this button to “Freeze-Frame” the current screen. Press this
button again to continue playing.
This button will select the MTS options of Stereo, SAP or Mono in
standard TV mode and alternate audio channels, where available, in
DTV mode.
While in PIP/POP mode; pressing SWAP will switch the displays
from the main screen to the sub-screen or vice versa.
Use this button to change the picture mode from Custom, Standard,
Movie and Game
This button displays the image and system information display.
Press this button to switch the audio from the main screen to the
sub-screen while in PIP or POP mode.
This button will select the Closed Caption mode. The options are
OFF, CC1, CC2, CC3, and CC4 and if Digital Cable Service is the
signal; you would get Service1 through Service6, depending on your local
company.
This button selects a programmed DVD player.
This button selects a programmed Audio Receiver/Amp/Home
Theater System.
This button selects a programmed cable TV set-top box or a satellite
TV set-top box.
This button has been pre-programmed to select the codes to operate the VIZIO HDTV.
Version 6/2/2008
15
www.VIZIO.com
VIZIO SV420XVT1A User Manual
1.5.1 Insertion of Batteries in the Remote Control
Open battery compartment by sliding cover in the direction of the arrow and insert two AAA batteries into
the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-)
symbols inside the battery compartment. Close the battery cover by sliding it in opposite direction to the
arrow.
Precautionary Tips for Inserting the Batteries:
For longer life and use of the batteries, please use alkaline.
Only use the specified AAA batteries.
Do not mix new and old batteries. This may result in cracking or
leakage that may pose a fire risk or lead to personal injury.
Inserting the batteries incorrectly may also result in cracking or
leakage that may pose a fire risk or lead to personal injury.
Dispose of the batteries in accordance with local laws and
regulations.
Keep the batteries away from children and pets.
1.5.2 Remote Control Range
Point the remote control at the remote control sensor to transmit the commands.
Do not place any obstacles between the remote control and the receiver window.
The effective range of the remote control is approximately 30 feet (10 meters) from the front of the
receiver window, 30° to the left and right, 20° up and down.
1.5.3 VIZIO Universal Remote Control Precautions
The remote control should be kept dry and away from heat sources. Avoid humidity.
If the TV responds erratically to the remote control or does not respond at all, check the batteries. If the
batteries are low or exhausted, replace them with fresh batteries.
When not using the remote control for a long period of time, remove the batteries.
Do not take the batteries apart, heat them, or throw them into a fire.
Do not subject the remote control to undue physical stress, such as striking or dropping it.
Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp cloth.
Version 6/2/2008
16
www.VIZIO.com
VIZIO SV420XVT1A User Manual
Chapter 2 Connecting Equipment
2.1 Which Video Connection Should I Use?
The VIZIO SV420XVT1A has six different ways to connect your video equipment from a basic connection
to the most advanced for digital displays.
Rear
Panel
Color
Codes
Description
White
and
Side of
TV
HDMI (High-Definition Multimedia Interface) - It is the
first and only industry-supported, uncompressed, alldigital audio/video interface. HDMI provides an
interface between any audio/video source, such as a
set-top box, DVD player, or A/V receiver and an
audio and/or video monitor, such as a digital
television (DTV), over a single cable.
Black
DTV Coaxial RF. When used for MPEG2 encoded
bit streams from ATSC broadcast programming, this
input takes advantage of the High Definition content.
-------------------------------------TV Coaxial RF. This is the connection for standard
NTSC TV using antenna or cable.
Best
(analog)
Blue
RGB PC (VGA) – This video input has separate red,
green and blue color components. The signal carries
horizontal and vertical sync information on the green
signal. This is most commonly used for PC input.
Better
(analog)
Green
and
Side of
TV
Component 1/2 - The video signal is separated into
three signals, one containing the black-and-white
information and the other two containing the color
information. This enhancement over S-Video takes
advantage of the superior picture provided by
progressive scan DVD players and HDTV formats.
Good
(analog)
Red
S-Video (AV1) - The video signal is separated into
two signals, one containing the black-and-white
information and the other containing the color
information. Separating the color in this way avoids
‘cross color’ effects where closely spaced black and
white lines are erroneously displayed in color. It also
enables text to be displayed more sharply.
Good
(analog)
Yellow
and
Side of
TV
AV1/2(Composite) - The complete video signal is
carried through this single pin connector. This is the
most commonly used video connection.
Connection
Quality
(type)
Best
(digital)
Best
(digital)
-----------Good
(analog)
Connector
Note: For more info refer to the Quick Start Guide
Version 6/2/2008
17
www.VIZIO.com
VIZIO SV420XVT1A User Manual
2.2 Connecting Your Cable or Satellite Box
2.2.1 Using HDMI
Cable and Satellite Boxes that have a HDMI digital interface should be connected to the HDMI input of
the LCD HDTV for optimal results.
Note: To maintain the display quality, use a VIZIO certified HDMI cable. Length is available up to 10
meters. See www.vizio.com or call 1-888-VIZIOCE (1-888-849-4623) for details.
Connecting your Cable or Satellite Box (Best)
1.
2.
3.
4.
Note:
a)
b)
c)
Turn off the power to the LCD HDTV and HDTV Set-Top Box.
Connect a HDMI cable to the HDMI output of your HDTV Set-Top Box and the other end to
the HDMI Input (white color area) at the rear of the LCD HDTV.
Turn on the power to the LCD HDTV and HDTV Set-Top Box.
Select HDMI using the INPUT button on the remote or side of the LCD HDTV, or directly by
pressing the HDMI button on the Remote Control.
The HDMI input on the LCD TV supports High-bandwidth Digital Content Protection
(HDCP). HDCP encrypts the transmission between the video source and the digital display
for added security and protection.
If you are already using the HDMI1 input for another component, or you do not want to use
the HDMI1 input for the Set-Top Box, you can connect the Set-Top Box to the HDMI2,
HDMI3 or HDMI4 connection.
Refer to your HDTV Set-Top Box user manual for more information about the video output
requirements of the product or consult your cable or satellite operator.
Version 6/2/2008
18
www.VIZIO.com
VIZIO SV420XVT1A User Manual
For Cable or Satellite Boxes with DVI:
1.
2.
Turn off the power to the LCD HDTV and HDTV Set-Top Box.
Using a HDMI-DVI cable, connect the DVI end to your HDTV Set-Top Box and the HDMI end
to the HDMI2 Input (white color area) at the rear of the LCD HDTV.
Using an audio cable (white and red connectors), connect the cable to the audio output
connectors associated with the DVI output on your HDTV Set-Top Box and connect the other
end to the audio connectors associated with the HDMI input (white area) at the rear of the
LCD HDTV.
Turn on the power to the LCD HDTV and HDTV Set-Top Box.
Select HDMI2 using the INPUT button on the remote or side of the LCD HDTV, or directly by
pressing the HDMI button on the Remote Control.
3.
4.
5.
Note:
d)
e)
f)
The HDMI input on the LCD TV supports High-bandwidth Digital Content Protection
(HDCP). HDCP encrypts the transmission between the video source and the digital display
for added security and protection.
If you are already using the HDMI2 input for another component, or you do not want to use
the HDMI2 input for the Set-Top Box, you can connect the Set-Top Box to the HDMI1,
HDMI3 or HDMI4 connection. The LCD TV will recognize the DVI connection and obtain
audio information from the audio connectors near HDMI2 input.
Refer to your HDTV Set-Top Box user manual for more information about the video output
requirements of the product or consult your cable or satellite operator.
Version 6/2/2008
19
www.VIZIO.com
VIZIO SV420XVT1A User Manual
2.2.2 Using Component Video
Connecting your Cable or Satellite Box (Better)
1.
2.
3.
4.
5.
6.
7.
Note:
a)
b)
Turn off the power to the LCD HDTV and HDTV Set-Top Box.
Connect the Y (green color) connector on your HDTV Set-Top Box to the corresponding Y
(green color) connector in the Component 1 group (green color area - row of connectors
nearest to you when viewing from the rear of the TV) at the rear of the LCD HDTV.
Connect the PbCb (blue color) connector on your HDTV Set-Top Box to the corresponding
Pb (blue color) connector in the Component 1 group (green color area - row of connectors
nearest to you when viewing from the rear of the TV) at the rear of the LCD HDTV.
Connect the PrCr (red color) connector on your HDTV Set-Top Box to the corresponding Pr
Cr (red color) connector in the Component 1 group (green color area - row of connectors
nearest to you when viewing from the rear of the TV) at the rear of the LCD HDTV.
Using an audio cable (white and red connectors), connect the cable to the audio output
connectors associated with the Component output on your HDTV Set-Top Box and connect
the other end to the audio connectors associated with the Component 1 input (green color
area) at the rear of the LCD HDTV.
Turn on the power to the LCD HDTV and HDTV Set-Top Box.
Select Component 1 using the INPUT button on the remote or side of the LCD HDTV, or
directly by pressing the COMP button on the Remote Control.
If you are already using the Component 1 input for another component, or you do not want
to use the Component 1 input for the Set-Top Box, you can connect the Set-Top Box to the
Component 2 connections on the side of the TV.
Refer to your HDTV Set-Top Box user manual for more information about the video output
requirements of the product or consult your cable or satellite operator.
Version 6/2/2008
20
www.VIZIO.com
VIZIO SV420XVT1A User Manual
2.3 Connecting Coaxial (RF)
2.3.1 Using Your Antenna or Digital Cable for DTV
1.
2.
3.
4.
Note:
a)
b)
c)
Turn off the power to the LCD HDTV.
Connect the coaxial (RF) connector from your antenna or digital
cable to the DTV/TV CABLE/ANTENNA connector at the rear
of the LCD HDTV.
Turn on the power to the LCD HDTV.
Select DTV using the INPUT button on the remote or side of
the LCD HDTV, or directly by pressing the TV button on the
Remote Control.
Not all digital TV broadcasts are High Definition (HD). Refer to the program guides, or
consult your cable, satellite or TV station operator.
Digital broadcasts are not available in all areas. Refer to www.antennaweb.org for detailed
information.
Make sure the antenna and coaxial cable are correctly grounded.
Version 6/2/2008
21
www.VIZIO.com
VIZIO SV420XVT1A User Manual
2.3.2 Using Your Antenna or Cable for TV
1.
2.
3.
4.
Turn off the power to the LCD HDTV.
Connect the coaxial (RF) connector from your antenna or cable
to the DTV/TV CABLE/ANTENNA connector at the rear of the
LCD HDTV
Turn on the power to the LCD HDTV.
Select TV using the INPUT button on the remote or side of the
LCD HDTV, or directly by pressing the TV button on the Remote Control.
2.3.3 Using the Antenna or Cable through your VCR
1.
2.
3.
4.
Turn off the power to the LCD HDTV and VCR.
Connect the “Output to TV”, “RF Out” or “Antenna Out” connector
on the rear of your VCR to the DTV/TV CABLE/ANTENNA
connector at the rear of the LCD HDTV.
Turn on the power to the LCD HDTV and VCR.
Select TV using the INPUT button on the remote or side of the
LCD HDTV, or directly by pressing the TV button on the Remote Control.
Note: If you have an off-air antenna or cable TV, connect it to the “Antenna In” connector on the rear of
your VCR.
Version 6/2/2008
22
www.VIZIO.com
VIZIO SV420XVT1A User Manual
2.4 Connecting Your DVD Player
You have several options for connecting your DVD player to your SV420XVT1A – HDMI, Component, SVideo and Composite (AV) inputs. Based on your home theater configuration, you can decide which
option is the right one for you.
2.4.1 Using HDMI
DVD players that have a digital interface such as HDMI (High Definition Multimedia Interface) should be
connected to the HDMI input of the VIZIO SV420XVT1A for optimal results.
Note: To maintain the display quality, use a VIZIO certified HDMI cable. Length is available up to 10
meters. See www.VIZIO.com or call 1-888-VIZIOCE (1-888-849-4623) for details.
Connecting your DVD Player (Best):
1.
2.
3.
4.
Note:
a)
b)
Turn off the power to the LCD HDTV and DVD player.
Connect a HDMI cable to the HDMI output of your DVD player and the other end to the HDMI
Input (white color area) at the rear of the LCD HDTV.
Turn on the power to the LCD HDTV and your DVD player.
Select HDMI using the INPUT button on the remote or side of the LCD HDTV, or directly by
pressing the HDMI button on the Remote Control.
If you are already using the HDMI1 input for another component, or you do not want to use
the HDMI 1 input for the DVD player, you can connect the DVD player to the HDMI2, HDMI3
or HDMI4 connection.
Refer to your DVD player user manual for more information about the video output
requirements of the product.
Version 6/2/2008
23
www.VIZIO.com
VIZIO SV420XVT1A User Manual
For DVD Players with DVI:
1.
2.
3.
4.
5.
Note:
a)
b)
Turn off the power to the LCD HDTV and DVD player.
Using a HDMI-DVI cable, connect the DVI end to your DVD player and the HDMI end to the
HDMI2 Input (white color area) at the rear of the LCD HDTV.
Using an audio cable (white and red connectors), connect the cable to the audio output
connectors associated with the DVI output on your DVD player and connect the other end to
the audio connectors associated with the HDMI input (white area) at the rear of the LCD
HDTV.
Turn on the power to the LCD HDTV and your DVD player.
Select HDMI 2 using the INPUT button on the remote or side of the LCD HDTV, or directly by
pressing the HDMI button on the Remote Control.
If you are already using the HDMI2 input for another component, or you do not want to use the
HDMI 2 input for the DVD Player, you can connect the DVD player to the HDMI1, HDMI3 or
HDMI4 connection. The LCD TV will recognize the DVI connection and obtain audio information
from the audio connectors near HDMI2 input.
Refer to your DVD player user manual for more information about the video output requirements
of the product.
Version 6/2/2008
24
www.VIZIO.com
VIZIO SV420XVT1A User Manual
2.4.2 Using Component Video
Connecting your DVD Player (Better):
1.
2.
3.
4.
5.
6.
7.
Note:
a)
b)
Turn off the power to the LCD HDTV and DVD player.
Connect the Y (green color) connector on your DVD player to the corresponding Y (green
color) connector in the Component 1 group (green color area - row of connectors nearest to
you when viewing from the rear of the TV) at the rear of the LCD HDTV.
Connect the PbCb (blue color) connector on your DVD player to the corresponding PbCb
(blue color) connector in the Component 1 group (green color area - row of connectors
nearest to you when viewing from the rear of the TV) at the rear of the LCD HDTV.
Connect the PrCr (red color) connector on your DVD player to the corresponding PrCr (red
color) connector in the Component 1 group (green color area - row of connectors nearest to
you when viewing from the rear of the TV) at the rear of the LCD HDTV.
Using an audio cable (white and red connectors), connect the cable to the audio output
connectors associated with the Component output on your DVD player and connect the other
end to the audio connectors associated with the Component 1 input (green color area) at the
rear of the LCD HDTV.
Turn on the power to the LCD HDTV and DVD player.
Select Component 1 using the INPUT button on the remote or side of the LCD HDTV, or
directly by pressing the COMP button on the Remote Control.
If you are already using the Component 1 input for another component, or you do not want
to use the Component 1 input for the DVD player, you can connect the DVD player to the
Component 2 connections on the side of the TV.
Refer to your DVD player user manual for more information about the video output
requirements of the product.
Version 6/2/2008
25
www.VIZIO.com
VIZIO SV420XVT1A User Manual
2.4.3 Using S-Video (AV1)
Connecting your DVD Player (Good):
1.
2.
3.
4.
5.
Turn off the power to the LCD HDTV and DVD player.
Connect the S-Video jack on the rear of your DVD player to the S-Video jack in the AV1 at
the rear of the LCD HDTV.
Using an audio cable (white and red connectors), connect the cable to the audio output
connectors associated with the S-Video output on your DVD player and connect the other
end to the audio connectors associated with the AV1 input at the rear of the LCD HDTV.
Turn on the power to the LCD HDTV and DVD player.
Select AV1 using the INPUT button on the remote or side of the LCD HDTV, or directly by
pressing the AV button on the Remote Control.
Note: Refer to your DVD player user manual for more information about the video output requirements of
the product.
Version 6/2/2008
26
www.VIZIO.com
VIZIO SV420XVT1A User Manual
2.4.4 Using Composite (AV) Video
Connecting your DVD Player (Good):
1.
2.
3.
4.
5.
Turn off the power to the LCD HDTV and DVD player.
Connect the Video (yellow color) connector on your DVD player to the Video (yellow color)
connector in the AV1 input row (yellow color area) of connectors at the rear of the LCD HDTV.
Connect the R (red color) and L (white color) audio connectors on your DVD player to the
corresponding R (red color) and L (white color) audio input connectors in the AV input (yellow
color area) row of connectors at the rear of the LCD HDTV.
Turn on the power to the LCD HDTV and DVD Player.
Select AV1 using the INPUT button on the remote or side of the LCD HDTV, or directly by
pressing the AV button on the Remote Control.
Note:
Refer to your DVD player user manual for more information about the video output requirements of
the product.
Version 6/2/2008
27
www.VIZIO.com
VIZIO SV420XVT1A User Manual
2.5 Connecting Your VCR or Video Camera
1.
2.
3.
4.
5.
Turn off the power to the LCD HDTV and VCR or Video Camera.
Connect the S-Video jack on the rear of your VCR or Video Camera to the S-Video jack in the
AV1 group (red area color) at the back of the LCD HDTV.
Using an audio cable (white and red connectors), connect the cable to the audio output
connectors associated with the S-Video output on your VCR or Video Camera and connect
the other end to the audio connectors associated with the AV1 input (red color area) at the
rear of the LCD HDTV.
Turn on the power to the LCD HDTV and VCR or Video Camera.
Select AV1 using the INPUT button on the remote or side of the LCD HDTV, or directly by
pressing the AV button on the Remote Control.
Note: Refer to your VCR or Video Camera user manual for more information about the video output
requirements of the product.
Version 6/2/2008
28
www.VIZIO.com
VIZIO SV420XVT1A User Manual
2.6 Connecting an external Receiver/Amp
1.
2.
3.
4.
5.
6.
7.
Note:
a)
b)
Turn off the power to the LCD HDTV and Receiver/Amp.
Using an audio cable (white and red connectors), connect the
cable to the audio input connectors on the Receiver/Amp and
connect the other end to the ANALOG OUT (white area)
audio connectors at the rear of the LCD HDTV.
Turn on the power to the LCD HDTV and Receiver/Amp.
Then press the MENU button on the remote control to open
the On-Screen Display (OSD) menu.
Press ▼ button on the remote control to select the Audio
menu.
on the remote control to select SPEAKERS.
Press
Press ► on the remote control to select OFF so that the
sound from the LCD HDTV will now be routed through your
Receiver/Amp system.
Refer to your Receiver/Amp user manual to select the corresponding audio input.
The audio output is not amplified and cannot be connected directly to external speakers.
2.6.1 Optical Output of Audio received with HD
Programs
If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical
DIGITAL AUDIO OUT (white area) at the rear of the LCD HDTV. This is active when receiving audio with
the programs being viewed no matter what input is being used.
Version 6/2/2008
29
www.VIZIO.com
VIZIO SV420XVT1A User Manual
2.7 Connecting a PC Computer
1.
2.
3.
4.
5.
Note:
a)
b)
c)
Turn off the power to the LCD HDTV and PC Computer.
Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your pc computer and the
other end to the RGB PC input (blue area) at the rear of the LCD HDTV.
Connect the Audio Out on your pc computer to the RGB PC Audio input (blue area) at the
rear of the LCD HDTV.
Turn on the power to the LCD HDTV and PC Computer.
Select RGB using the INPUT button on the remote or side of the LCD HDTV.
For a better picture quality when connecting a pc computer through RGB PC, set your pc
computer timing mode to VESA 1366x768 at 60Hz. For the best picture quality, please refer
to the pc or graphic card’s user guide to find out if it is capable of an output of 1920x1080 at
60Hz resolution when using the parameters and values given to you on Section 2.7.2 of this
User’s Manual by way of VESA Reduce Blanking timing.
Refer to your pc computer user manual for more information about the video output
requirements of the product.
A RGB (VGA) cable and stereo mini jack cable are not included and can be purchased at an
electronics store.
Version 6/2/2008
30
www.VIZIO.com
VIZIO SV420XVT1A User Manual
2.7.1 Preset PC Resolutions
If connecting to a PC through the RGB PC input, set the TV timing mode to VESA 1360x768 at 60Hz
for better picture quality (refer to the graphic card’s user guide for questions on how to set this timing
mode). Please see the table below for the factory preset resolutions. Also see chart in Section 2.7.2,
for the best resolution that can be obtained through RGB PC input when video card supports
1920x1080 resolution.
Resolution
Refresh
(Hz)
H.Freq
(kHz)
V.Freq
(Hz)
H.Sync
V.Sync
Pixel Freq
(MHz)
640x480
60
31.46
59.94
N
N
25.17
640x480
75
37.50
75.00
N
N
31.50
*720x400
70
31.46
70.08
N
P
28.32
800x600
72
37.87
60.31
P
P
40.00
800x600
75
46.87
75.00
P
P
49.50
1024x768
60
48.36
60.00
N
N
65.00
1024x768
70
56.47
70.06
N
N
75.00
1024x768
75
60.02
75.02
P
P
78.75
**1920x1080
60
66.65
60.00
P
P
136.50
NOTES: N = Negative, P = Positive, * = In DOS Mode only, ** = Primary Mode. Please refer to 2.7.2 for
more information.
2.7.2 Resolution
VGA) Input
(1920x1080)
through
RGB
(15-Pin
If your PC supports VESA Reduce Blanking timing via the VGA card drive program (usually offered
by the VGA Card Manufacturer), your TV set is equipped to have the 1920X1080 resolution display
through this connection using the following timing 136.5MHz. The following parameters are often the
values required by the software or programs to set up the display:
Parameters
Address
Vertical Values
(Lines)
1920
1080
Front Porch
32
1
Sync Width
32
3
Back Porch
64
27
2048
1111
Total
Frequency
Sync Polarity
Version 6/2/2008
Horizontal
Values (Pixels)
66.65 kHz
P
Pixel Rate (MHz)
136.5
Refresh Rate (Hz)
60
31
www.VIZIO.com
60 Hz
P
VIZIO SV420XVT1A User Manual
Chapter 3 Setting Up to Watch Television
For Preparing Your LCD HDTV for Wall Mounting; see page 6 for details.
3.1 Basic LCD HDTV Start Up
1. Connecting the Power Cable
Connect the power cord to the power cord connector on the back of the HDTV, and then plug the
power cord into an AC wall socket.
2. Connect Audio and Video Cables to the
HDTV
(see pages 17 ~ 30 for detailed steps)
3. Turning Power On
Once all the components are connected,
press the Power ON button on the side of
the HDTV, or press the Power ON (Red)
button on the remote control.
4. Initial Setup
After powering on the TV set, the Initial
Setup screen will come up; please press
button on the remote control.
the
The Language choice screen will be
displayed; the default English option is
highlighted. If you wish to change the
OSD language to Español or Français,
press the ▼ button on the remote control
to select the language you want.
button on the remote to go
Press the
to the next screen.
Note: At this point, if a Set-Top Box from your
Local Cable or Satellite Service Company or other
equipment is been used; please press the EXIT
key on the remote control and skip to Step 5. If
this is not your case, please continue at Step b.
a. The Tuner screen will be
displayed; default choice is
Antenna. If you are using Cable
(No Box) Service, press the ▼
button on the remote control to
highlight CABLE.
Version 6/2/2008
32
www.VIZIO.com
VIZIO SV420XVT1A User Manual
Press the
button on the
remote to go to the next screen.
b. The Channel Scan screen will be
displayed; default choice is Scan.
button on the
Press the
remote control to commence the
search for available channels to be
stored into memory.
If you do not want to scan for channels at this time, press the ▼
highlight Skip Scan and then press the button.
button on the remote to
Note: If you select Skip Scan, next time that you
decide to complete this procedure; you will need to
select the TV as input and then go through the
Menu option to select the Tuner setup to get the
option of scanning the channels again.
c.
The screen will now change to show the progress of the search for Analog (NTSC) and
Digital (ATSC) channels.
Note: DTV digital broadcast is not available in all areas. Refer to www.antennaweb.org to get
information about availability in your area, type of antenna and in which direction to point your
antenna. The channel availability through cable depends upon which channels your cable
operator supplies in Clear QAM; consult your cable operator for more information.
Version 6/2/2008
33
www.VIZIO.com
VIZIO SV420XVT1A User Manual
d. When finished, the Complete
screen will be displayed to inform
you that the HDTV has completed
the Initial Setup.
button on the
Press the
remote control to exit and begin
watching TV.
5. Select Input Source
Select the Input Source for the HDTV by
pressing the INPUT button on the side of the TV or using the Input button on the remote control.
Pressing this button will cycle you through the following options: TV,
AV1/S-VIDEO, AV2, Component1, Component2, RGB, HDMI1, HDMI2,
HDMI3 and HDMI4.
Now follow the procedure below to display channels from a
different signal (External TV Tuner, VCR, Cable Box or Satellite
Receiver) source, using different inputs at the back of you TV set.
a. Select the correct input connection; RF (DTV/TV) connector,
Composite (Yellow, Red and White) connectors, Component (Red,
Green, Blue plus Red and White) connectors, HDMI connectors or
Separate-Video (S-Video) plus Red and White connectors (if applicable).
Make the physical connection or hook up.
b. If you have an HD service you must use the HDMI (best) or
Component connection.
Note: Composite (AV) and S-Video Cables can only be used for SD (480i) pictures.
c. Turn on your Cable Box, VCR, External TV Tuner or Satellite Receiver and you will see a
picture on your TV set. If there is not picture, make sure you have selected the correct input on the
TV set.
d. If the selected input is RF, you should be aware that the TV set needs to be on either
channel 3 or channel 4 matching the channel which has been selected on the back of the VCR, Cable
Box, External TV Tuner or Satellite Receiver; please refer to Owner or User’s Manual of such
equipment for details.
Note: The TV set will be displaying any television station or program selected by the Cable Box, VCR,
External Tuner or Satellite Receiver. The TV set will not be able to change programs or channels; this is
controlled by the equipment sending the signal. If the service being used is the one which setup
includes a box with two different outputs for two different (distant) rooms, then scanning
channels would help you to find the signal. Be aware that the channel to be selected varies from
provider to provider; meaning that, you may have to call your provider company so they could
provide you the specific channel when using high definition made TV sets. Some examples of
these channels are: 105, 106, 115 and 116.
Version 6/2/2008
34
www.VIZIO.com
VIZIO SV420XVT1A User Manual
6. Fine Tuning your TV set for Home Use.
After completing Procedure 4 or Procedure 5; please follow the steps
below to optimize your TV set display:
a. Press the MENU key to bring up the Menu display. Use the ▲
or ▼ button to scroll to the Advanced Video option.
b. Press the
button to select it.
c. Use the ◄ or ► button to change setting to
Normal Temperature option.
d. Press the MENU key again to go back to previous screen.
e. Press either ◄ or ► button to change the Picture Mode option to Standard.
f. Press the EXIT key to exit the on screen
display Menu.
Note: If Procedure 4 had been done, you would like to do the following to
ensure that the correct program times are shown
when pressing the Guide key:
Press the Menu key, this will bring up the picture
mode menu.
Press either ▲or ▼ button scroll down to the next page. The next screen will
appear showing Time Zone.
Press either
button to select it.
Press either ◄ or ►button to choose the proper Time Zone of your area.
Press the EXIT key once to return to your program if task has been
completed.
Your new TV set is now ready to automatically reproduce the best picture quality out of the input signal
which is been fed into it. Enjoy your TV watching!!
Version 6/2/2008
35
www.VIZIO.com
VIZIO SV420XVT1A User Manual
3.2 Watching a TV Program
Before you start watching TV, please make sure that any cable, satellite or off-air antenna connections
are secure. Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge
protector.
1.
2.
Press the power button on the remote or on the side of the HDTV. The VIZIO logo on the
front will change from orange to white.
There are 3 options for selecting your programming:
a. If you are using an antenna or cable connected through the DTV/TV CABLE/ANTENNA
input, you can select TV directly by pressing the TV button on the remote, or by pressing
the INPUT button on the remote or on the side of the HDTV.
b. If you are watching broadcasts through a cable or satellite set-top box connected by an
HDMI cable, select HDMI directly by pressing the HDMI button on the remote, or by
pressing the INPUT button on the remote or on the side of the HDTV.
c. If you are watching broadcasts through a cable or satellite set-top box connected by a
Component (YPbPr) cable, select Component directly by pressing the Component button
on the remote, or by pressing the INPUT button on the remote or on the side of the HDTV.
Note: You should be able to see a picture. If you do not,
make sure that all of the HDTV connections are secure and
you have selected the correct video input source.
3.
When using option 2a, press the Channel buttons on the remote or the CH+ / CH- buttons on
the side of the HDTV to change the channel. Note: The Channel buttons, on the side of the
HDTV and on the remote, control will not work if you are watching a program using HDMI,
Component and AV inputs.
Version 6/2/2008
36
www.VIZIO.com
VIZIO SV420XVT1A User Manual
3.3 Adjusting Basic HDTV Settings
Volume
To adjust the volume, press and hold the
VOL+ or VOL- button on the side of the
LCD HDTV or remote control until the
desired level is reached.
TV Channels
To step up or down through the available
TV channels, press the CH+ or CH- button
on the side of the HDTV or remote control
once for the next or previous channel, or
hold it depressed until the desired channel
is reached. Note: Channel up and down
will only operate in DTV and TV modes.
Wide
Using this feature, you can watch video
content in different size modes on the
HDTV.
Press the MENU button on the remote
control to bring up the OSD screen.
Press the ▼ button and scroll down to
Setup.
Press the
button to select this option.
Press the ▼ button and scroll down to Wide.
Press either the ◄ or ► button to select among the modes.
Fore more information see Section 4.17.1 – Viewing Modes, on page 73.
Version 6/2/2008
37
www.VIZIO.com
VIZIO SV420XVT1A User Manual
3.4 Program Information
Press the GUIDE button once on the remote, and the following screen will be displayed; showing the
information of the channel being viewed:
The following is an explanation of the different sections of the above banner:
Program Information:
Provided by Broadcaster
Program
Rating
Closed Caption
is available
Audio is Spanish
Stereo
TV Channel
Number
1080i HDTV (High Definition TV)
Station Name: provided
by Broadcaster
Source is
Antenna
Press the GUIDE button twice and at least two and half hours of programming will be shown on the
display; as shown below:
Version 6/2/2008
38
www.VIZIO.com
VIZIO SV420XVT1A User Manual
Chapter 4 Advanced Adjustment of HDTV
4.1 Using the On Screen Display (OSD)
The remote control or the control buttons on the right hand side of the TV can control all the function
settings. The On Screen Display (OSD) allows you to adjust the save contrast, brightness and other
settings. The TV will save changes made to the settings, even if the TV is turned off.
The OSD consists of several menu options: Picture Adjust, Audio Adjust, Setup and TV Tuner Setup.
The main menu options may very depending on your selected input source.
Note: Some of the main menu options may have additional submenus, i.e. the TV Rating submenu for
Parental Controls.
Press the MENU button on the remote control or the side of the TV and the Picture menu will be shown
on the screen.
Press the ▼ or ▲ button on the remote control or the CH + or CH – button on
the side of the HDTV to select one of the other menu options:
Picture (Picture Adjust)
Audio Mode (Audio Adjust)
TV (TV Tuner Setup)
Setup (Global Settings)
Press
to select the option or feature which you want to adjust.
Once the menu option is displayed, press the ◄ or ► button on the remote control or the VOL + or VOL
– button on the side of the TV to adjust the desired option.
Press the MENU key once to return to the previous screen or press the EXIT to return to your program if
task has been completed.
Version 6/2/2008
39
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.2 DTV / TV Input Picture Adjustment
4.2.1 Picture Mode
When the MENU button is pressed, the On Screen Display (OSD) appears
on the PICTURE adjustment page.
Press the
button to select the Picture Mode selection.
Use the ◄ or ► button to choose from Custom, Standard, Movie, Game,
Vivid, Football, Golf, Basketball and Baseball.
Picture Adjustments are available for you to set them to your preferred
settings.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
4.2.2 Backlight
Press the ▼ button to highlight the Backlight selection.
Use the ◄ or ► button to adjust the level.
The Backlight level does not affect the Brightness (black level) or Contrast
(white level) of the picture, it adjusts the lamp current and this affects the
overall brilliance of the picture.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
Note: This setting will be disabled and disappear if Enhanced Contrast Ratio
is turned on.
4.2.3 Brightness
Press the ▼ button to highlight the Brightness selection.
Use the ◄ or ► button to adjust the level.
The Brightness adjusts the black levels in the picture. If the brightness is too
low you will not be able to see the detail in darker parts of the picture and if
the brightness is too high the picture will look washed out.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
Version 6/2/2008
40
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.2.4 Contrast
Press the ▼ button to highlight the Contrast selection.
Use the ◄ or ► button to adjust the level.
The Contrast adjusts the white levels in the picture. If the contrast is too low
the picture will look washed out and if the contrast is too high you will not be
able to see any detail in the bright parts of a picture.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
4.2.5 Color
Press the ▼ button to highlight the Color selection.
Use the ◄ or ► button to adjust the level.
The Color adjusts the amount of color in the picture.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
4.2.6 Tint
Press the ▼ button to highlight the Tint selection.
Use the ◄ or ► button to adjust the level.
The Tint adjusts the hue of the picture. The easiest way to set tint is to look at
flesh tones and adjust for a realistic appearance. In most cases, the default
middle position is correct. If people’s faces look too orange try reducing the
level of color first as the case of this is often too much color.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
Version 6/2/2008
41
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.2.7 Sharpness
Press the ▼ button to highlight the Sharpness selection.
Use the ◄ or ►button to adjust the level.
The Sharpness adjusts the sharpness of the picture.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
4.2.8 Advanced Video Features
Press the ▼ button to highlight the option for Advanced Video selection. Press either the
button to
select it. A new menu will be displayed showing the advanced functions available for fine tuning of the
picture.
Noise Reduction (SNR)
Press the ▼ button to highlight Smart Noise Reduction (SNR). Use this
feature to diminish picture artifacts caused by the digitizing of image motion
content that may be present in the picture.
Press the ◄ or ► button to choose from the Off, Low, Medium or Strong
setting.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
Color Enhancement
Press the ▼ button to highlight Smart Color Enhancement. Use this feature to
increase the picture reproduction performance of the picture.
Press the ◄ or ► button to choose from Off, Normal, Rich Color, Green/Flesh and Green/Blue setting.
Once the adjustments are completed press the EXIT button to exit the OSD completely.
Version 6/2/2008
42
www.VIZIO.com
VIZIO SV420XVT1A User Manual
Advanced Adaptive Luma
Press the ▼ button to highlight Advanced Adaptive Luma. Large areas of darkness in a picture will result
in a lower Average Picture Level (APL) and the overall picture will look too dark; activation of this feature
will raise the APL to counteract this effect.
Press the ◄ or ► button to choose from the Off, Low, Medium, Strong or Extend setting.
Once the adjustments are completed press the EXIT button to exit the OSD completely.
Enhanced Contrast Ratio (DCR)
Press the ▼ button to highlight Enhanced Contrast Ratio. This feature can be
set to On or OFF to allow the TV set to adjust its backlight to display dark and
bright scenes with a more vivid or intense quality.
Press the ◄ or ► button to turn this feature On or Off. Note: Backlight setting
would be disabled if this option is set to On.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
Color Temperature
Press the ▼ button to highlight the option for Color Temperature selection.
The default is COOL; this is the 9300K setting.
Press the ◄ or ► button if you want to choose the Normal, Warm or Custom
option.
If you select any option, then a new menu will be displayed showing the
primary colors; Red, Green and Blue.
Press the ▼ button to highlight the color you wish to adjust.
Press the ◄ or ►button to start adjusting the color.
Use the ◄ or ►button to adjust the color.
Press the MENU button when finished. Repeat the procedure to adjust the
other colors if desired.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
Version 6/2/2008
43
www.VIZIO.com
VIZIO SV420XVT1A User Manual
Smooth Motion Effect
The Smooth Motion option is a switch option which controls the intensity or
levels of intensity of the video (Smooth and Precision) features incorporated
in this TV model.
Press the ▼ button to highlight the Smooth Motion option.
Use the ◄ or ►button to select your choice. There are four choices; Off, Low,
Middle or High, please select your preference.
Real Cinema Mode
The use of this option will allow you to select the two new features built-in in
this model. These features are described as operational (features) functions designed to enhance the
quality of the images or programming being viewed.
Press the ▼ button to highlight the Real Cinema Mode option.
Use the ◄ or ►button to select your choice. There are three choices; Off,
Precision and Smooth.
Precision Feature
When selecting this feature you will obtain a sharper image of the scene you
are watching; sometimes depending on the quality of the signal and quality of
the recorded pictures (movies), the presence of the halo effect will not be
noticeable.
Smooth Feature
This feature will allow increasing the quality of the picture as far as to motion
on the scenes it refers, eliminating the effect of juddering during a fast action
moving scene and sports programs. Depending on the quality of the signal
being watched, the halo effect is noticeable.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
Version 6/2/2008
44
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.2.9 Reset Picture Mode
Press the ▼ button to highlight the option for Reset Picture Mode selection
Press ► button to return the Picture settings to factory default.
A screen will come up to give you the options of either to confirm your selection
or to cancel it, if you had changed your mind
Press either ◄ or ► to make the selection.
Press
to accept it.
Once the adjustments are completed press the EXIT button to exit the OSD completely.
Note: Only settings under the Picture adjustments will be reset.
Version 6/2/2008
45
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.3 DTV / TV Audio Adjustment
4.3.1 Audio Mode
When the MENU button is pressed, the On Screen Display (OSD) appears on
the PICTURE adjustment page.
Press the ► button to display the AUDIO ADJUST page.
Press the ▼ button to highlight the Audio Mode selection.
Use the ◄ or ► button to choose from Flat, Rock, Pop, Classic or Jazz.
Equalizer adjustments are available for you to set them to your preferred
settings.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
4.3.2 Equalizer
Press the ▼ button to highlight the Equalizer selection.
A new menu will be displayed showing volumes of different frequencies
(pitches).
Use the ◄ or ► button to select the frequency to be adjusted.
Starting from lowest to the highest pitch, they are 120 Hz, 500Hz, 1.5 kHz,
5kHz and 10kHz.
Press either ▼ or ▲ button to adjust the selected frequency to your preference.
For example if you want to boost the bass you would highlight 120Hz and
turn it up.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
Note: The equalizer option is not available in the SRS TSXT surround effect mode.
4.3.3 Balance
Press the ▼ button to highlight the Balance selection.
Use the ◄ or ► button to adjust the left/right balance.
Once the adjustments are completed press the EXIT button to exit the OSD completely.
Version 6/2/2008
46
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.3.4 Digital Audio Out
This feature uses the SPDIF (Optical connector) audio signal to be used
through Home Theatre system.
Press the ▼ button to highlight the Digital Audio Out selection.
Press the ◄ or ► button to make the proper selection. The options are OFF,
Dolby Digital and PCM.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
4.3.5 Speakers
Press the ▼ button to highlight the Speakers selection.
Press either ◄ or ► button to turn the internal speakers On or Off. You may
want to turn-off the internal speakers when listening to the audio through your
Home Theatre System.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
4.3.6 Analog Audio Out
When using the RCA (white and red) connectors as audio line out to connect a stereo system.
Press the ▼ button to highlight the Analog Audio Out selection.
Press either ◄ or ► button to turn the audio out signal to Fixed or Variable. When it is set to variable,
volume from the external speakers will change according to the volume setting on the TV. If it is fixed, the
volume can only be changed by the settings on the external stereo system.
Once the adjustments are completed press the EXIT button to exit the OSD completely.
4.3.7 Lip Sync
Included with the advanced technology of your TV, a feature which will
compensate the shortcomings of signal transmission called audio sync (Lip
Sync). Lip Sync is designed to adjust the audio of the program being viewed
so that it matches the movement of the lips of someone talking on the screen.
This feature is built into your set, and it can be applied to all inputs. To use
this feature, follow the steps below.
Press the MENU key to bring up the OSD.
Press either ▼ or ▲ button to scroll either up or down to Lip Sync.
Press either ◄ or ► button to make the appropriated adjustment.
Press either the MENU key once to return to the previous screen or the EXIT
key to return to your program if task has been completed.
Version 6/2/2008
47
www.VIZIO.com
VIZIO SV420XVT1A User Manual
Added Audio (Sound) Features
Even though; the SV420XVT1A comes equipped with SRS (TruSurroundXT) digital audio, your TV has a
built-in enhancement feature called Wireless Speaker which allows you to upgrade the audio to Dolby
Digital 5.1 surround sound; through the purchasing of our Wireless Speakers System.
4.3.8 Wireless Speaker
Press either ▼ or ▲ button to scroll either up or down to Wireless Speaker.
Press either ◄ or ► button to select it either On or Off.
If you select ON and the following message appears; that implies that the TV has not been upgraded with
the Wireless Speaker System. By no having the upgrade, all the features or options which apply to the
Dolby Digital 5.1 surround sound are not available
.
If you had obtained the upgrade (Wireless Speaker System) kit, and still the
above message is displayed please refer to the instructions which come with
the upgrade kit to verify that you had done the correct steps to match up or
pair up the Wireless set and the TV.
4.3.9 Speaker Setting
This option allows having a better or handing control of the Wireless System.
Press the ▼ button to highlight the Speaker Setting selection.
Press
to accept it. The following options and adjustments will become
available to you to set the TV sound to your desired preferences.
Speakers Location
When selecting this option, the TV will reproduce a sound which will indicate
the location of the different speakers as well and their proper operation. It
means that while the screen will show the an icon of the speaker being test,
the sound will let you know not only if the speaker is properly functioning,
but also will let you know if it is in the right position (Left, Center, Right, Left
Rear, Subwoofer and Right Rear) maximizing the sound quality of the
surround sound and the reproduction of the special effects (i.e; airplanes
traveling direction, explosions,., etc) of a movie.
Press the ▼ button to highlight the Speaker Location option.
Press ► button to run this option.
Press either the MENU key to stop the cycling of this option and go back to
previous menu display or the EXIT key to exit the OSD completely.
Version 6/2/2008
48
www.VIZIO.com
VIZIO SV420XVT1A User Manual
Speakers Distance
The range of the wireless system is up to 35 feet for the subwoofer and each
satellite speaker (Rear Left and Rear Right) comes with a 15 feet of speaker
wire. Adjusting this option will allow you to take advantage of setting the TV
to the specific distances within the constraints of your room. The distance
between subwoofer and TV is set in increments of 5 feet up to 35 feet, and
the values applicable to the satellites are in increments of 3 feet up to 15 feet.
These values are used to adjust the response needed for the audio signal to
reach the Subwoofer and satellite speaker without loss of quality output by
the speakers.
Press the ▼ button to highlight the Speaker Distance option.
Press
to choose the speaker which value needs to be adjusted.
Press
either ◄ or ► to set the value.
Press either the MENU key to go to the previous menu to adjust a second
speaker or the EXIT key to exit the OSD completely.
Trim
This allows the adjustments of each individual speaker volume according to your preferences.
Press the ▼ button to highlight the Trim option.
Press the ► button to select it.
Press either the ▲ or ▼ button to select the speaker which value needs to be
adjusted.
Press either ◄ or ► to make the desired adjustment.
Press either the ▲ or ▼ button again to select the next speaker.
Press either ◄ or ► to make the desired adjustment.
You can repeat these two steps to set the values for all six (Left, Right, Rear
Left, Rear Right, Center and Subwoofer) speakers, or press the MENU key
to go to previous menu or press EXIT key to exit the OSD completely.
Version 6/2/2008
49
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.3.10 Wireless Sound Effect
This feature allows making a selection of the output sound reproduce by the wireless speaker system,
depending on the type of the audio signal being supplied.
Press the ▼ button to highlight this option.
Press either ◄ or ► to select (Dolby Digital Prologic II Music, Dolby Digital
Prologic II Movie or Dolby Digital Prologic II Matrix) the kind of sound you
want to match with the audio signal being supplied to the TV.
If Wireless speaker has been selected Off, then you can continue with the
next option of the menu.
Note: When a program carrying a Dolby Digital 5.1 signal; is supplied
to the TV, a LED (red 5.1) indicator displaying such signal can be seen
on the bottom right hand side of the center speaker.
4.3.11 Sound Effect
As it was previously mentioned your TV comes with a factory setting of SRS (TruSurroundXT) digital
audio selection which is the perfect option when using the TV as stand
alone unit, but we at VIZIO gives you the options to select the audio output
to your own preferences.
Press the ▼ button to highlight this option.
Press either ◄ or ► to go through the different (Regular Stereo, Stereo +
Center Speaker and SRS TSXT) adjustments and select the one to your
preference.
Version 6/2/2008
50
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.3.12 DRC (Dynamic Range Compression)
This option allows adjusting the dynamic range compression of the audio
encoded in a Dolby Prologic II signal input into the TV.
Press the ▼ button to highlight the DRC option.
Press either ◄ or ► to select the desired setting. The values are either Full,
¼, ½, ¾ and Off.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
4.3.13 Reset Audio Mode
Press the ▼ button to highlight the option for Reset Audio Mode selection
Press ► button to return the Audio settings to factory default.
The options of either accepting or cancelling the resetting will be display.
Press either ◄ or ► to make the selection.
Press
to accept it.
Note: Only settings under the Audio adjustments will be reset.
Once the adjustments are completed press the EXIT button to exit the OSD completely.
Version 6/2/2008
51
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.4 DTV / TV Tuner Setup
When you first used your HDTV you will have setup your TV for DTV / TV channels using the Initial Setup
screens. If you did not do this or if your setup has changed, you can do this from the TV TUNER SETUP
menu.
Once the adjustments are completed press the EXIT button to exit the OSD completely.
4.4.1 Tuner Mode
When the MENU button is pressed, the On Screen Display (OSD) appears
on the PICTURE adjustment page. Press the ► button to display the TV
page.
Press the ▼ button to highlight the Tuner Mode selection.
Press the ► button to choose Cable or Air (Antenna) depending upon
which equipment you have attached to the DTV / TV Input.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
4.4.2 Auto Search
Press the ▼ button to highlight the Auto Search selection.
Press the ► button to Auto Search for TV channels available. The TV will
automatically search for analog and digital channels.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
Version 6/2/2008
52
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.4.3 Partial Channel Search
If you believe channels are missed from the auto search, you can do a
partial channel search to look for channel in a certain channel range again.
Press the ▼ button to highlight the Partial Channel Search selection.
Press the ► button to enter the submenu.
Press the ► button to select scan mode to look for Analog, Digital, or both
Analog/Digital channels.
Press the ▼ button to highlight the “To” and “From” selection. Press the ►
button to select the range of channel numbers you want to start searching in.
to start channel search.
Press
Once the adjustments are completed press the EXIT button repeatedly to
exit the OSD completely.
4.4.4 Skip Channel
After the TV has stored all of the available DTV channels in memory you will
find that some channels will be too weak to watch comfortably or they may
be channels you do not want to see. Select the channel you wish to remove
by pressing the MENU button to bring up the OSD.
Press the ► buttons to open the TV TUNER SETUP menu.
Press the ▼ button to highlight SKIP CHANNEL.
Press the ► button to select this channel to be skipped when using the CH+
or CH- button. You will still be able to select this channel using the number
buttons on the remote control.
4.4.5 MTS
This feature allows you, the user to select the different languages in which
the signal provider or broadcaster is transmitting the audio with the program
you are watching. This signal is usually or in most cases Spanish language.
Press the ▼ button as many times as it takes to scroll down to this option and
get it highlighted.
Press either ◄ or ► button to go through the settings of this feature to make
your selection.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
Version 6/2/2008
53
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.4.6 Time Zone
Setting the correct Time Zone for your area will ensure that the correct
program times are shown after pressing the GUIDE button on the remote
control.
Press the ▼ button to highlight the Time Zone selection.
Press the ► button to select your area.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
4.4.7 Daylight Saving
As for Time Zone, setting the daylight saving time for your area will ensure
that the correct program times are shown after pressing the GUIDE button
on the remote control.
Press the ▼ button to highlight the Daylight Saving selection.
Press the ► button to select On or Off.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
Version 6/2/2008
54
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.5 DTV / TV Input Setup
4.5.1 Language
When the MENU button is pressed, the On Screen Display (OSD)
appears on the PICTURE adjustment page. Press the ► button until the
SETUP page is displayed.
Press the ▼ button to highlight the Language selection. The default is
English.
Press the ► button to select Español or Français.
Once the adjustments are completed press the EXIT button to exit the
OSD completely.
4.5.2 PIP (Picture-in-Picture)
Press the ▼ button to highlight the PIP (Picture-in-Picture) selection.
Press the ► button. A separate menu will appear with the following PIP settings.
PIP Mode
Press the ▼ button to highlight the PIP mode selection.
Press the ◄ or ► button to select Off, PIP or POP (Picture-outside
picture). In the PIP mode a smaller sub screen will be displayed on top of
the main screen. For the POP mode the main screen and sub screen will
be of equal size and be positioned side by side.
Version 6/2/2008
55
www.VIZIO.com
VIZIO SV420XVT1A User Manual
PIP Source
When PIP or POP is selected, Press the ▼ button to highlight the PIP input selection.
Press the ◄ or ► button to choose the input source for the sub screen. The input sources available will
vary according to which input is used for the main screen; see the table below to find which inputs can
PIP/POP with each other.
See below for detailed information regarding the PIP sources.
SUB
Component
1
Component
2
HDMI1
HDMI2
HDMI3
HDMI4
RGB
DTV
9
9
9
9
9
9
9
TV
9
9
9
9
9
9
9
AV1
9
9
9
9
9
9
9
AV2
9
9
9
9
9
9
9
MAIN
DTV
TV
AV1
AV2
Component 1
9
9
9
9
9
9
9
9
Component 2
9
9
9
9
9
9
9
9
HDMI 1
9
9
9
9
9
9
9
HDMI 2
9
9
9
9
9
9
9
HDMI 3
9
9
9
9
9
9
9
HDMI 4
9
9
9
9
9
9
9
RGB
9
9
9
9
9
9
9
9
“9” – Indicates which inputs are available for PIP and POP modes.
PIP Position
When PIP is selected, Press the ▼ button to highlight the PIP position selection.
Press the ◄ or ► button to choose where on the picture you want the PIP screen positioned over the
main screen.
PIP Size
When PIP is selected, Press the ▼ button to highlight the PIP size selection.
Press the ◄ or ► button to choose Small, Medium or Large.
PIP Audio Source
When PIP or POP is selected, Press the ▼ button to highlight the PIP audio source selection.
Press the ◄ or ► button to choose the audio source from the main screen or the sub screen.
Once the adjustments are completed press the EXIT button to exit the OSD completely.
Version 6/2/2008
56
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.5.3 Sleep Timer
Press the ▼ button to highlight the Sleep Timer selection.
Press the ► button to select the timer to turn-off the TV in 30, 60, 90 or
120 minutes.
Once the adjustments are completed press the EXIT button to exit the
OSD completely.
4.5.4 Wide
The Wide option is the feature which allows you to select how your
display would be size wise. When in TV mode; the selections are
Normal, Wide, Panoramic and Zoom views.
Press the ▼ button as many times as it takes to scroll down to this
option and highlight it.
Press either ◄ or ► button to make the correct selection; you will see
the screen adjusting to the different sizes which apply to this feature.
Once the adjustments are completed press the EXIT button to exit the
OSD completely.
Version 6/2/2008
57
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.5.5 Input Naming
This feature has been added to facilitate you, the user in identifying or
label the input and signal which is being watched. You could use up to 8
characters; either letters or numbers or combinations of both.
Press ▼ button to highlight this option.
Press ► button to obtain the next screen which shows the different
inputs.
Press ▼ button to select the desired
input which you want to label or name
(Examples: VCR, DVD,.., etc.) it with
any name which will make easier for
you to recognize it.
key to go to the first
Press the
space (_) in the bracket.
Press either the ▲ or ▼ button and
select either the letter or number
belongs to this place.
Press the ► button to go to the next space (_) and again
Using either the ▲ or ▼ button select the second character of the name
given to this Input.
Repeat the last previous two steps until the name of the input is
completed.
Press the
key to accept the name of the input or the EXIT key to
cancel the setting. .
Press the MENU key when you have finished to go to the previous
menu.
Since you are already in this feature; it is recommendable to name all
the Inputs which are being used as well as these for which you have an
idea what their name is going to be.
Once the adjustments are completed press the EXIT button to exit the
OSD completely.
Version 6/2/2008
58
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.5.6 CC (Closed Caption)
Press the ▼ button to highlight the CC (Closed Caption) selection.
Press the ► button. A separate menu will appear with the following CC
settings
CC
When watching regular analog (NTSC) TV, the CC feature is available in
the Setup menu.
Press the ▼button to highlight the CC selection.
Press the ►button to select CC1, CC2, CC3 or CC4.
Once the adjustments are completed press the EXIT button to exit the
OSD completely.
Closed Caption for regular TV is usually CC1 or CC2.
Digital Closed Caption Style
When watching DTV, the Digital CC Style feature is available in the Setup
menu.
Press the ▼ button to highlight the Digital CC Style selection.
Press the ► button to go to the next screen.
Press either ◄ or ► button to toggle between the two options; As
Broadcaster and Custom.
If Custom is selected then you will have the way of customize the way
Closed Caption will be displayed by changing these different parameters
to your like: Font Size (letters size), Font Color (letters color) Font
Opacity (transparency of the letters), Background Color (color of the
background area where Closed Caption is going to be displayed),
Background Opacity (allows to either see through at the scene being
played or it could be a solid screen), Window Color (it gives the color to
the area where characters will be displayed on) and finally Window
Opacity (allows the area of the characters to be changed). There are no
recommendations of setting these parameters since you, the user would
have your own taste or like of them.
Once the adjustments are completed press the EXIT button to exit the
OSD completely.
Version 6/2/2008
59
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.5.7 H/V Position
Press the ▼ button to highlight the H/V Position selection.
Press the ►button. A separate menu will appear with the following H/V
Position settings
H-Position
Press the ▼ button to highlight the Horizontal Shift selection.
Use the ◄ or ► button to adjust the horizontal position.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
V-Position
Press the ▼ button to highlight the Vertical Shift selection.
Use the ◄ or ► button to adjust the vertical position.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
H-SIZE
Press the ▼ button to highlight the H-Size selection.
Use the ◄ or ► button to adjust the horizontal size.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
V-SIZE
Press the ▼ button to highlight the V-Size selection.
Use the ◄ or ► button to adjust the vertical size.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
Version 6/2/2008
60
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.5.8 DTV / TV Input Parental Control
If you want to restrict certain channel and program viewing, you can do
this by turning on the Parental Control. Selected programs, movies and
channels can then be made available only after an authorized password
has been entered and accepted by the TV.
When the MENU button is pressed, the On Screen Display (OSD)
appears on the PICTURE adjustment page.
Press the ► button to display the SETUP
page.
Press the ▼ button to highlight Parental,
and then press the ► button.
The Password must be entered before the TV will continue with Parental
settings. The default password set in the factory is 0 0 0 0. If you are going
to use the Parental Control feature you should change the password.
Note: Make sure you write down and store the new password in a secure place.
The Reset All Settings feature (see page 66) does NOT reset the password.
Version 6/2/2008
61
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.5.9 Channel Block
Press the ▼ button to highlight the Channel Block selection.
Press the ► button to go to the next screen.
Press the ▼ button to highlight the channel you want to block.
Press the
button to block the highlighted channel.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
4.5.10 US TV Rating
Follow the procedure in the previous section to display the Parental Control
menu and then press the ▼ button to highlight the US TV Rating selection.
Press the ► button and the Block TV Rating panel will be displayed.
In the Block TV Rating panel you can customize the program blocking of the
following TV ratings:
Y – All children
Y7 – Older children
G – General audience
PG – Guidance suggested
14 – Strongly cautioned
MA – Mature audience
You can also customize the TV ratings for the following content:
A – All subratings
D – Sexual dialog
L – Adult language
S – Sexual situations
V - Violence
FV – Fantasy violence
Press the ▲ or ▼ button to navigate through the TV rating options.
Press the
button to block (locked) or allow (unlocked).
Version 6/2/2008
62
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.5.11 US Movie Rating (For US)
Press the ▼ button to highlight the US Movie Rating selection.
Press the ► button and the Block Movie Rating panel will be displayed.
In the Block Movie Rating panel you can customize the program blocking of
the following Movie ratings:
G
– General audience
PG
– Parental guidance suggested
PG-13 – Recommended for children 13 years of age or older
R
– Mature audience
NC-17 – No one under 17 years of age
X
– No one under 17 years of age
Press the ▲ or ▼ button to navigate through the Movie rating options.
Press the
button to block (locked) or allow (unlocked).
4.5.12 Canadian English Rating
Press the ▼ button to highlight the Canadian English Rating selection.
Press the ► button and the Block Canadian English Rating panel will be
displayed.
In the Block Canadian English Rating panel you can customize the program
blocking of the following ratings:
C
– Children
C8+
– Children 8 years or older
G
– General Programming, suitable for all audiences
PG
– Parental guidance
14+
– Viewers 14 years or older
18+
– Adult programming
Press the ▲ or ▼ button to navigate through the Movie rating options.
Press the
button to block (locked) or allow (unlocked).
Version 6/2/2008
63
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.5.13 Canadian French Rating
Press the ▼ button to highlight the Canadian French Rating selection.
Press the ► button and the Block Canadian French Rating panel will be
displayed.
In the Block Canadian French Rating panel you can customize the
program blocking of the following ratings:
G
– General audience
8 ans+ – General – not recommended for young children
13 ans+– Not suitable for children under 13 years of age
16 ans+– Not suitable for under 16 years of age
18 ans+– Adults only
Press the ▲ or ▼ button to navigate through the Movie rating options.
Press the
button to block (locked) or allow (unlocked).
4.5.14 Check for DTV Rating
This option is designed to update the TV or Movie table of different ratings for programs being viewed in
your local or regional area. It will allow the parental guidance control
feature in your TV to have the most current parental control database for
a digital signal. This option may be available in the future for activation.
This option works as follows: Whenever you decide to use the Parental
Control feature and this option has been activated in your area, the
Check for New DTV Rating will be a solid color indicating that an update
is available for any rating tables. After entering the password, the
Parental menu will appear on the screen, and then do the following.
Observe the status of the DTV Rating. If option is faded out, no update is
available (the option is not activated in your area).
If it is not faded out, press either ▲ or ▼ button to select this option.
Press ► button to execute this operation. Please follow the on screen
instructions to complete this procedure.
Press either ▲ or ▼ to select and then adjust any other option in this
menu.
Once the adjustments are completed press the EXIT button to exit the
OSD completely.
Version 6/2/2008
64
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.5.15 Blocked Unrated Programming
Follow the procedure in the previous section 4.5.8 to display the Parental
Control menu and then press the ▼ button to highlight the Block Unrated
TV selection.
Press the ► button to turn-on or turn-off the blocking of programming
that does not have a rating.
Once the adjustments are completed press the EXIT button to exit the
OSD completely.
4.5.16 Change the Password
Press the ▼ button to highlight the Access Code Edit selection.
Press the ► button and the new Password panel will be displayed.
Enter the new, 4-digit password using the number buttons on the remote.
Enter it a second time to confirm you entered it correctly.
Once the adjustments are completed press the EXIT button to exit the
OSD completely.
Note: Make sure you write down and store the new password in a secure place.
The Reset All Settings feature (see page 66) does NOT reset the password.
Version 6/2/2008
65
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.5.17 Reset All Settings
Press the ▼ button to highlight the Reset All Settings selection.
Press the ► button to reset the TV to the default factory settings.
The screen will display a message to confirm that you want to reset
the values to factory settings.
Use the ◄ or ► button to highlight your selection.
Press the
button to confirm your choice.
Once the adjustments are completed press the EXIT button to exit the OSD completely.
Note: This does NOT reset the Parental Control Password.
Version 6/2/2008
66
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.6 HDMI Input Picture Adjustment
The Picture Adjust menu operates in the same way for the HDMI Input as for
the DTV / TV input in section 4.2.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
4.7 HDMI Input Audio Adjustment
The Audio Adjust menu operates in the same way for the HDMI Input as for the
DTV / TV input in section 4.3.
4.8 HDMI Input Setup
The Setup menu operates in the same way for the HDMI Input as for the TV
input in section 4.4. The menu difference is that there is no DTV / TV or
Parental Control adjustments.
Version 6/2/2008
67
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.9 Video Input Picture Adjustment
The Picture Adjust menu operates in the same way for Video Inputs
(Component and AV) as for the DTV / TV input in section 4.2. The menu
difference is that there is no icon along the top for DTV / TV adjustments.
4.10 Video Input Audio Adjustment
The Audio Adjust menu operates in the same way for Video Inputs
(Component and AV) as for the DTV / TV input in section 4.3. The menu
difference is that there is no icon along the top for DTV / TV adjustments.
4.11 Video Input Setup
The Setup menu operates in a similar way for Video Inputs (Component and
AV) as for the TV input in section 4.4. The menu difference is that there is an
auto phase setting under the H/V Position submenu when using Component
input.
Version 6/2/2008
68
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.12 Auto Phase (for Component input)
Press the ▼ button to highlight the H/V Position.
Press the ► button and the new H/V Position submenu will be displayed.
Press the ▼ button to highlight Auto Phase.
Press the ► button to execute this option. The TV will automatically look for
the phase of the signal to fine tune the picture.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
4.13 Video Input Parental Control
The Parental Control menu operates in the same way for Video Inputs
(Component and AV) as for the DTV / TV input in section 4.5.8. The menu
difference is that there is no icon along the top for DTV / TV adjustments.
Version 6/2/2008
69
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.14 PC Input Picture Adjustment
The Picture Adjust menu operates in the same way for the PC Input as for the DTV / TV input in section
4.2 for Backlight, Contrast, Brightness and Color Temperature.
4.14.1 Auto Adjust
When the MENU button is pressed, the On Screen Display (OSD) appears
on the PICTURE adjustment page.
Press the ▼ button to highlight the Auto Adjust selection.
Press the ► button for the LCD HDTV to adjust to the PC signal timing
automatically.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
4.14.2 H-Position
Press the ▼ button to highlight the Horizontal Shift selection.
Press the ► button to start adjusting the horizontal position of the picture.
Use the ◄ or ► button to adjust the horizontal position.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
4.14.3 V-Position
Press the ▼ button to highlight the Vertical Shift selection.
Press the ► button to start adjusting the vertical position of the picture.
Use the ◄ or ► button to adjust the vertical position.
Once the adjustments are completed press the EXIT button to exit the OSD completely.
Version 6/2/2008
70
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.14.4 H-SIZE
Press the ▼ button to highlight the H-Size selection.
Press the ► button to start adjusting the horizontal size of the picture.
Use the ◄ or ► button to adjust the horizontal size.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
4.14.5 V-SIZE
Press the ▼ button to highlight the H-Size selection.
Press the ► button to start adjusting the horizontal size of the picture.
Use the ◄ or ► button to adjust the horizontal size.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
4.14.6 Fine Tune
Press the ▼ button to highlight the Fine Tune selection.
Press the ► button to start tuning the to the PC signal.
Use the ◄ or ► button to adjust the tuning.
Once the adjustments are completed press the EXIT button to exit the OSD
completely.
Version 6/2/2008
71
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.15 PC Input Audio Adjustment
The Audio Adjust menu operates in the same way for the PC Input as for
the DTV / TV input in section 4.3. The menu difference is that there are
no icons along the top for DTV / TV and Parental Control adjustments.
4.16 PC Input Setup
The Setup menu operates in the same way for the PC Input as for the
DTV / TV input in section 4.4. The menu difference is that there is no
icon along the top for TV adjustments and no Closed Caption.
Version 6/2/2008
72
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.17 Understanding Viewing Features
Your HDTV features the following viewing modes. You can switch viewing modes using the remote
control, please follow the instructions in page 37.
4.17.1 Viewing Modes
Normal Mode
The original 4:3 aspect ratio (1.33:1 source) is preserved, so black bars are
added to the left and right of the display image. Standard TV broadcasts are
displayed with a 4:3 Aspect Ratio. Movies in 4:3 Aspect Ratio may be referred
to as pan-and-scan or full frame. These movies were originally filmed in 16:9
(widescreen), and then modified to fit a traditional TV screen (4:3).
Wide Mode
When watching a standard broadcast or full-frame movie in this mode,
the display image is stretched proportionately to fill the TV screen.
When watching a widescreen (1.78:1 source) program or movie, the
display image fills the TV screen. If you are watching a widescreen
(1.85:1 or 2.35:1 source) program or movie, there will still be black
bars at the top and bottom.
Panoramic Mode
When watching a standard broadcast or full frame movie in this mode,
the 4:3 Aspect Ratio (1.33:1 source) display image is stretched
horizontally on the left and right sides to fill the TV screen. The center
of the image is not stretched.
Zoom Mode
When watching a widescreen (1.78:1, 1.85:1, or 2.35:1 source)
program or movie, the display image is zoomed proportionally to fill
the width of the screen. The top and bottom are cut off to remove
most of the source material’s black bars. This mode is good for
programs or movies with sub-titles.
Version 6/2/2008
73
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.17.2 Picture-In-Picture (PIP) Mode
Your TV features PIP mode so you can watch two pictures at the same time. When PIP is turned on, you
can display two pictures at one time. One picture is displayed as the full screen (main screen) and the
other picture is displayed in a small window (sub screen). The sub-screen can be set to small, medium or
large.
See below for detailed information regarding the PIP sources.
SUB
Component
1
Component
2
HDMI1
HDMI2
HDMI3
HDMI4
RGB
DTV
9
9
9
9
9
9
9
TV
9
9
9
9
9
9
9
AV1
9
9
9
9
9
9
9
AV2
9
9
9
9
9
9
9
MAIN
DTV
TV
AV1
AV2
Component 1
9
9
9
9
9
9
9
9
Component 2
9
9
9
9
9
9
9
9
HDMI 1
9
9
9
9
9
9
9
HDMI 2
9
9
9
9
9
9
9
HDMI 3
9
9
9
9
9
9
9
HDMI 4
9
9
9
9
9
9
9
RGB
9
9
9
9
9
9
9
9
“9” – Indicates which inputs are available for PIP and POP modes.
4.17.3 Adjusting Basic PIP Settings
The PIP channel is independent of the main TV channel. To change the PIP channel, press the PIP CH
button on the remote control. Alternatively, you can change the PIP channel by pressing the CH+ or CHbutton.
Repeated pressing of the PIP
button will turn on, turn off the
PIP mode.
Press the PIP SIZE button to
alternate between Small, Medium
and Large PIP sizes.
Repeated pressing of the PIP
INPUT button will cycle through
the inputs for PIP. This button has no effect when PIP is off.
You can swap the program that is in the main picture with the program in the
PIP sub-picture. To swap the main picture program with the PIP sub-picture program, press SWAP on
the remote control. If you press SWAP again, it will return the program to the main picture.
Version 6/2/2008
74
www.VIZIO.com
VIZIO SV420XVT1A User Manual
Programming the VIZIO Universal Remote Control
You can program the remote control to work with up to four different pieces of equipment including your
VIZIO SV420XVT1A. Listed below are the steps for programming your VCR, Cable Box and DVD Player.
4.17.4 Programming for VCR
1.
2.
3.
4.
Manually turn on the VCR.
Press the VCR button on the remote control.
Press and hold the SET button until the LED LIGHT flashes twice.
Find the programming code for your VCR in the code list in the back of this book and enter it using
the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component
and manufacturer.
5. Point the remote control at the VCR and press the POWER button. The VCR will turn off.
Note:
a)
b)
If your VCR does not respond, try all the codes for your VCR brand. If the codes do not
work, or your brand is not listed, see “Searching for Component Codes.”
Sometimes a code listed will only include limited functions. Try other codes that may
include more functionality.
4.17.5 Programming for Cable Set-Top Box
1.
2.
3.
4.
Manually turn on the Cable Box.
Press the CBL button on the remote control.
Press and hold the SET button until the LED LIGHT flashes twice.
Find the programming code for your Cable Box in the code list in the back of this book and enter it
using the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is
entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component and
manufacturer.
5. Point the remote control at the Cable Box and press the POWER button. The Cable Box will turn off.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component and
manufacturer.
Note:
a)
b)
If your Cable Set-Top Box does not respond, try all the codes for your brand. If the codes
do not work, or your brand is not listed, see “Searching for Component Codes.”
Sometimes a code listed will only include limited functions. Try other codes that may
include more functionality.
Version 6/2/2008
75
www.VIZIO.com
VIZIO SV420XVT1A User Manual
4.17.6 Programming for DVD Player
1.
2.
3.
4.
Manually turn on the DVD Player.
Press the DVD button on the remote control.
Press and hold the SET button until the LED LIGHT flashes twice.
Find the programming code for your DVD player in the code list in the back of this book and enter it
using the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is
entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component
and manufacturer.
5. Point the remote control at the DVD Player and press the POWER button. The DVD Player will turn
off.
Note:
a)
b)
If your DVD player does not respond, try all the codes for your brand. If the codes do not
work, or your brand is not listed, see “Searching for Component Codes.”
Sometimes a code listed will only include limited functions. Try other codes that may
include more functionality.
4.17.7 Searching for Component Codes
If you cannot find the manufacturer in the component list or the program code does not work, you can use
the remote control to search for the correct component code.
To search for a component code:
1.
Turn on the component.
2.
Press the matching component button on the remote control.
3.
Press and hold the SET button until the LED flashes twice.
4.
Press 9 9 1. The LED flashes twice.
5.
Point the remote control at the component and then alternate between pressing the POWER
button and the component button on the remote control until the component turns off.
If the component still does not respond, clear the component button, then repeat the search
procedure.
4.18 Using a Cable or Satellite Remote
Your VIZIO remote uses codes 000, 047, 050, 067, 329, 331 and 339 to work your LCD HDTV. To use a
cable or satellite remote to work the LCD HDTV, refer to your cable or satellite remote user guide for
more information on how to program the remote. If your cable or satellite remote uses a 5-digit code (like
most Direct TV units), first try 11758 and then, if that does not work, 10178. If your cable or satellite
remote uses a 4-digit code, try 1758 and then 0178 as an alternative. If your cable or satellite remote
uses a 3-digit code (Echostar or Dish Network for example), use code 627.
Note: Some buttons may not function as expected on your cable or satellite remote. Typically power,
volume and mute will work.
Version 6/2/2008
76
www.VIZIO.com
VIZIO SV420XVT1A User Manual
Chapter 5 Maintenance and Troubleshooting
5.1 Maintenance
Important
1.
2.
Make sure that the power cable is removed from the socket before cleaning the TV.
Do not use volatile solvent (such as toluene, rosin and alcohol) to clean the TV. Such
chemicals may damage the housing, screen glass and remote control, and cause paint to
peel.
Cleaning the Housing and Remote Control
1.
2.
Use the VIZIO soft cloth for cleaning.
If the housing or remote control is seriously contaminated, use a soft cloth moistened with
diluted neutral cleaner to clean the display. Wring water out of the cloth before cleaning to
prevent water from penetrating into the housing. Wipe the display with a dry cloth after
cleaning.
Cleaning the Screen
1.
2.
Use the VIZIO soft cotton cloth to gently clean the screen.
The screen glass is very fragile. Do not scrape it with any sharp object. Do not press or tap
the screen to avoid cracking. When the screen is seriously contaminated, use a soft cloth
moistened with diluted neutral cleaner to clean the display. Wring water out of the cloth
before cleaning to prevent water from penetrating into the housing. Wipe the display with a
dry cloth after cleaning.
5.2 Troubleshooting Guide
If the TV fails or the performance changes dramatically, check the display in accordance with the
following instructions. Remember to check the peripherals to pinpoint the source of the failure. If the
display still fails to perform as expected, contact the VIZIO for assistance by calling 1-877-698-4946 or
e-mail us at techsupport@vizio.com.
Problem
Solution
No power.
Make sure the power button is ON (White VIZIO Logo).
Make sure AC power cord is securely connected to the AC socket.
Plug another electrical device (like a radio) to the power outlet to verify that the
outlet is supplying the proper voltage.
No sound.
Check your audio connection
Press MUTE on the remote control again, so that MUTE disappears from the screen
Check your audio settings, your TV audio may be set to SAP, min or speakers off.
Press the Volume + (Up) key on your remote control
Make sure that headphones are not connected
If the screen is black.
Check your input connections.
Power is ON but no screen
Make sure the video cable supplied with the TV is secured to the correct video
Version 6/2/2008
77
www.VIZIO.com
VIZIO SV420XVT1A User Manual
Problem
Solution
image.
output port on the back of the VCR and the TV. Make any cable you have attached
to the TV is secured to the correct output your Set-Top Box, DVD, etc.
Adjust brightness and contrast.
Check Source settings.
Wrong or abnormal colors
appear.
If any colors (red, green, or blue) are missing, check the video cable to make sure it
is securely connected.
Control buttons do not work.
Press only one button at a time.
Remote
work.
Make sure batteries are inserted correctly
Batteries could be weak.
Make sure you have selected TV on the remote.
Control
does
not
There appears to be image
quality issues.
For best image quality, view HD wide screen programs where possible. If HD
content is not available view “Standard Definition” from a digital source. Standard,
analog TV will always be noticeably inferior to HD because your digital flat panel TV
has video that is many times better than old TV’s and so you can see interference
and deficiencies you did not know you had.
You cannot see a picture.
Make sure that the power cord is plugged into a grounded electrical outlet.
Make sure that the power button is turned on.
Make sure that the selected input source is connected to a working input source.
If your TV is connected to your computer in RGB or HDMI mode, press any key on
your keyboard to “wake” your computer.
You see a distorted picture or
hear unusual sound.
You may be getting interference from electrical appliances, cars, motorcycles, or
fluorescent lights. If you have not mounted it on the wall, try moving your TV to
another location to see if this is the cause of the problem.
The picture has abnormal
patterns.
Make sure that the input source cable is attached securely and correctly to the back
of your TV.
Make sure that the video input source is within the range of your TV. Compare the
video input source’s specifications with your TV specifications.
The display image does not
cover the entire screen.
If you are using RGB mode, make sure that H Size and V Position in the On Screen
Display (OSD) are set correctly.
If you are using TV, AV1, AV2 or Component with 480i input, use the WIDE button
on the remote control to scroll through various screen modes.
You can see a picture but you
cannot hear sound.
Make sure that the volume is not turned down.
Make sure that the sound is not muted.
Make sure that your audio input source cables are connected securely and correctly.
The TV has pixels that are
always dark or colored.
Your LCD HDTV is manufactured using an extremely high level of precision
technology, however, sometimes some pixels of your LCD HDTV may not display.
Pixel defects within industry specifications are inherent to this type of product and do
not constitute a defective product.
You see “noise” or “trash” on
the screen.
When your LCD HDTV’s digital capabilities exceed a digital broadcast signal, the
signal is up-converted (increased) to match your TV’s display capabilities. Upconverting can cause noise or trash.
You switch to a different input
and the volume changes.
The TV remembers the volume level from the last time you adjusted it. If the sound
level is higher or lower from another source, then the loudness will change.
Tips for High-Definition Users.
The LCD HDTV is an ideal platform for viewing High Definition Content.
Best Image Quality will be achieved by the HDMI Input, then YPbPr, then RGB.
However, due to variances in broadcast practices, it is possible some image
distortions can occur.
Version 6/2/2008
78
www.VIZIO.com
VIZIO SV420XVT1A User Manual
Problem
Solution
Tips for Letterbox Content
Users.
Letterboxed (or “Widescreen”) versions of DVD movies are most commonly
formatted for standard 4:3 Televisions. The LCD HDTV has the capability of
expanding this content so the entire screen is filled at the expense of image
accuracy. To use this function, press the “ZOOM” key on the remote control and
cycle among the available options.
5.3 Wireless Speakers System and TV Pairing
If pairing of the Wireless Speakers System is needed, please follow the steps below:
1. Make sure that the slide switch in the Tx Card is to the ID position and insert it into TV
slot.
2. Plug AC Power cord into subwoofer, subwoofer LED power indicator will flash
intermittently.
3. Press and hold down the Channel Search button at the back side of the Subwoofer for
approximate 5 seconds; a long beep will be heard.
4. Light of the LED indicator will stop flashing and a solid light will be displayed. Pairing is
done.
5. To have the two sets working as one, please take the Tx Card out from the slot. Slide
the switch to the Play position and reinsert it into the TV slot.
6. Your TV and Wireless Speakers System have become now a Dolby 5.1 theatre
entertainment system.
5.4 Telephone & Technical Support
Products are often returned due to a technical problem rather than a defective product that may result in
unnecessary shipping charges billed to you. Our trained support personnel can often resolve the problem
over the phone. For more information on warranty service or repair, after the warranty period, please
contact our Support Department at the number below.
Customer support and quality service are integral parts of VIZIO’s commitment to service excellence.
For technical assistance contact our VIZIO Technical Support Department via e-mail or phone.
E-mail: techsupport@vizio.com
Tel: (877) 698-4946 Fax: (949) 585-9563
Hours of operations:
6:00am – 9:00pm PST Monday – Friday
8:00am – 4:00pm PST Saturday – Sunday
Please have your VIZIO model number, serial number and date of purchase available before you call.
VIZIO
39 Tesla
Irvine CA 92618
Tel: (949) 428-2525 Fax: (949) 585-9514
Web: www.VIZIO.com
Version 6/2/2008
79
www.VIZIO.com
VIZIO SV420XVT1A User Manual
5.5 Compliance
Caution: Always use a power cable that is properly grounded. Please use the AC cords listed below for
each area.
USA
Canada
Germany
UK
Japan
UL
CSA
VDE
BASE/BS
Electric Appliance Control Act
5.6 FCC Class B Radio Interference Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy, and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1.
Reorient or relocate the receiving antenna.
2.
Increase the separation between the equipment and receiver.
3.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4.
Consult the dealer or an experienced radio/TV technician for help.
Notice:
1.
2.
3.
The changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Shielded interface cables and AC power cord, if any, must be used in order to comply with
the emission limits.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modification to this equipment. It is the responsibilities of the user to correct such
interference.
Version 6/2/2008
80
www.VIZIO.com
VIZIO SV420XVT1A User Manual
Chapter 6 Miscellaneous Information
6.1 Specifications
Specifications
Panel
42” Diagonal, 16:9 Aspect Ratio
Resolution
1920 x 1080 pixels
Pixel (Dot) Pitch
0.4845 mm x 0. 4845 mm
Display Compatibility
1080P (Full HDTV)
Colors
1.06 Billion
Brightness
500 cd/m2 (typical)
Contrast
1300 :1 (typical), 6500 :1 (with DCR)
Response Time
5ms (typical)
Viewing Angle
Horizontal and Vertical 178° (typical)
Inputs
1x Coaxial RF (ATSC/QAM/NTSC),4x HDMI™** with HDCP (1 with Stereo Audio RCA), 2x
Component YPbPr plus Stereo Audio, 1x RGB PC plus Stereo Audio (1/8” stereo jack), 2x
Composite Video plus Stereo Audio, 1xS-Video plus Stereo Audio
Outputs
1x Optical Audio (SPDIF Optical), 1x Stereo Audio (RCA)
Features
FULL HD, PIP, POP, Noise Reduction, CC, V-Chip, 3D Comb Filter, Freeze, Support Motion
Enhancement and Motion Correction, Picture Enhancement, MPEG-2 Decoding via DTV input,
NTSC Video decoding via Video (AV, S-Video or Component), Progressive Scan Video via
HDMI™**, Component or RGB, HDTV via HDMI™**, Component or RGB (Set-Top Box
required), Computer 640x480, 800x600, 1024x768, 1280x1024, 1920x1080 via RGB or
1920x1080 via HDMI, Built-in SRS (TruSurroundXT) Audio, Supports 1080P (Full HDTV) , 1080i
(HDTV) , 720P (HDTV) , 480P (EDTV) and 480i (SDTV) video signals. 1080P FHDTV, HDMI
V.1.3, 120 Hz Motion Estimation & Motion Compensation, 3.0 channel audio, built-in Dolby
Digital Decoding, upgradeable to 5.1 Dolby Surround sound speakers w/ wireless linked
subwoofer.
Speakers
3 x 10 W
Panel Life
50,000 hours to half the original brightness
Power
Input
IEC Connector for direct power line connection
Voltage Range
100 ~ 240Vac at 50/60Hz
Power Consumption
300W
Environmental Conditions
Operating
Temperature: 5°C~35°C, Relative Humidity: 20~80%, Altitude: 0~14,000 ft
Non-Operating
Temperature: -20°C~50°C, Relative Humidity: 10~90%, Altitude: 0~40,000 ft
Dimensions
39.4” W x 27.2” H x 9.5” D with stand; 39.4” W x 25.6” H x 4” D without stand
Net Weight
46.3lbs with stand, 44.6lbs without stand
Gross Weight
58.3lbs
Certifications
CSA, CSA-us, FCC class B
*Product specifications may change without notice or obligation.
Version 6/2/2008
81
www.VIZIO.com
VIZIO SV420XVT1A User Manual
6.2 Glossary – Standard Definitions
Analog TV: Today’s TV system using radio frequency waves to transmit and display pictures and sound.
Aspect Ratio (4x3): Traditional TV “aspect ratio”, that is, the screen’s width as compared to its height.
For example, a “32 inch TV screen” would be 25 inches wide and 19 inches tall.
Aspect Ratio (16x9): “Wide screen TV” aspect ratio which is more like a movie screen than a traditional
TV. For example, a “32 inch TV screen” would be 28 inches wide and 16 inches tall.
Digital TV (DTV): Television delivered and displayed using radio frequency waves that contain
information that is digitally encoded for improved quality and efficiency.
Enhanced Definition TV (EDTV): A better digital television transmission than SDTV with at least 480P,
in a 16x9 or 4x3 display and Dolby digital surround sound. 480P is the quality used by most DVD players.
EDTV provides 300-400,000 pixels.
HDTV Monitor (sometimes called HDTV Ready): A set that can display HDTV programming if you have
a separate HDTV tuner, HD Cable Set-Top Box or HD Satellite Set-Top-Box Receiver.
HDTV Tuner (also decoder, receiver, set-top box): A device capable of receiving and outputting HDTV
signals for display. It may be stand-alone or integrated in the set.
High-Definition Television (HDTV): The best quality picture, wide screen (16x9) display with at least
720 progressively scanned lines (720P) or 1080 interlaced lines (1080i) and Dolby digital surround sound.
HDTV provides 900,000-2.1 million pixels.
Integrated HDTV: An HDTV that has the digital tuner built into the set. It does not need a separate settop box to receive over-the-air DTV signals.
Interlace Scan: A way to scan vertical lines onto a TV picture by scanning all the odd lines first, then
filling the in the even lines (this happens instantaneously).
Plug-and-Play or Digital Cable Ready: A DTV or other device for digital cable consumers that plugs
directly into the cable jack and does not require a separate set-top box. Plug-and-Play TV owners must
obtain a CableCARD from their cable company in order to view scrambled programming services.
Progressive Scan: A way to scan vertical lines onto a TV picture by scanning all the lines consecutively
(progressively).
Standard Definition TV (SDTV): Basic digital television transmission that may be displayed with fewer
than 480 progressively scanned lines (480P) in 16 x 9 or 4 x 3 format. 480 interlaced (480i) is the quality
of today’s analog TV system.
Source: Buying a Digital Television, CEA, HDTV Guide, 2005
Note: The Federal Communications Commission (FCC), the Consumer Electronics Association (CEA)
and the Consumer Electronics Retailers Coalition (CERC) have made a new tip sheet available for digital
television (DTV) retailers to reproduce and distribute to consumers on the sales floor. The file may be
downloaded online at www.dtv.gov. While you’re there, check out the other useful information in the FCC
is making available to consumers interested in learning more about the analog to digital transition.
Version 6/2/2008
82
www.VIZIO.com
VIZIO SV420XVT1A User Manual
6.3 Index
A
Accessories, 5
Adjustments
Closed Caption, 15
Selecting the Screen Size, 15, 37, 82
Stepping through TV Channels, 37
Volume, 10, 37, 77
Advanced Video Features
Black Level Extender, 42
Color Temperature (Color Temperature, 43
CTI (Color Transient Improvement, 43
DNR (Dynamic Noise Reduction, 42
Flesh Tone, 43
C
Cleaning your VIZIO TV, 77
Co-axial RF
Connecting for DTV, 21
Connecting for TV, 22
Component
Connecting your Cable Box, 20
Connecting your DVD Player, 25
Connecting your Satellite Box, 20
Composite (AV)
Connecting your DVD Player, 26, 27
Connecting your VCR, 28
Connecting your Video Camera, 28
Controls, 10
Side Panel, 10
D
DTV
Audio Adjustment, 46
Parental Control, 61
Picture Adjustment, 40
Special Features, 55
Tuner Setup, 52
DTV Audio Adjust
Equalizer, 46
DTV Audio Adjust
Volume, 46
DTV Audio Adjust
Balance, 46
DTV Audio Adjust
Digital Audio Out, 47
DTV Audio Adjust
Speakers, 47
DTV Audio Adjust
Line Out, 47
DTV Audio Adjust
Lip Sync, 47
DTV Audio Adjust
Reset Audio Mode, 51
DTV Picture Adjust
Version 6/2/2008
Advanced Video, 42
Backlight, 40
Brightness, 40
Color, 41
Contrast, 41
Reset Picture Mode, 45
Sharpness, 42
Tint, 41
DTV Special Features
Digital Closed Caption, 59
Input Naming, 58
Language, 55
PIP, 55
Reset, 66
Sleep Timer, 55, 57
Wide, 57
DTV Tuner Setup
Auto Search, 52
Daylight Saving, 54
MTS, 53
Partial Channel Search, 53
Skip Channel, 53
Time Zone, 54
Tuner Mode, 52
DVI
Connecting your Cable Box, 19
Connecting your DVD Player, 24
Connecting your Satellite Box, 19
G
Glossary, 82
H
HDMI
Connecting your Cable Box, 18
Connecting your DVD Player, 23
Connecting your Satellite Box, 18
HDMI Input
Audio Adjustment, 67
Picture Adjustment, 67
Setup, 67
I
Inputs
Antenna, 3
Connectors, 17
Side Label, 12
Installation
Base removal, 6
Preparation, 5
Safetey Strap, 5
Wall Mounting, 5, 6, 32
83
www.VIZIO.com
VIZIO SV420XVT1A User Manual
O
OSD
Brightness Adjustment, 81
Closed Caption Selection, 15
Color Adjustment, 17
Contrast Adjustment, 81
Outputs
Using 5.1 Surround with a Home Theatre System, 29
Using an external Receiver/Amp, 29
P
Parental Control
Block Unrated Programming, 65
Canadian English Rating, 63
Canadian French Rating, 64
Channel Block, 62
Check for New DTV Rating, 64
Movie Rating, 63
Password change, 65
TV Rating, 62
PC Input
Audio Adjustment, 72
Auto Adjust, 70
Picture Adjustment, 70
Setup, 72
PC Picture Adjust
Fine Tune, 71
H/V Position, 60
Horizontal Position, 60, 70
Horizontal Size, 60, 71
Vertical Position, 60, 70
PIP and POP Inputs, 74
R
Remote
Batteries, 16
Range, 16
Remote Control
Programming to work your DVD Player, 76
Programming to work your Set-Top Box, 75
Programming to work your VCR, 75
Using your Cable or Satellite Remote to Operate your
VIZIO TV, 76
RGB
Connecting your PC, 30
S
Screen Size explanation, 73
S-Video
Connecting your DVD Player, 26, 27
T
Troubleshooting Guide, 77
TV
Audio Adjustment, 46
Parental Control, 61
Picture Adjustment, 40
Special Features, 55
TV Audio Adjust
Balance, 46
Digital Audio Out, 47
Equalizer, 46
Line Out, 47
Lip Sync, 47
Reset Audio Mode, 51
Speakers, 47
Volume, 46
TV Picture Adjust
Advanced Video, 42
Backlight, 40
Brightness, 40
Color, 41
Contrast, 41
Reset Picture Mode, 45
Sharpness, 42
Tint, 41
TV Special Features
Closed Caption, 59
Input Naming, 58
Language, 55
PIP, 55
Reset, 66
Sleep Timer, 55, 57
Wide, 57
TV Tuner Setup, 52
Auto Search, 52
MTS, 53
Partial Channel Search, 53
Skip Channel, 53
Tuner Mode, 52
V
Video Input
Audio Adjustment, 68
Auto Phase, 69
Parental Control, 69
Picture Adjustment, 68
Setup, 68
W
Watching TV
Basic Adjustments, 37
Basic connections, 32
First Startup, 32
Getting your Programs, 36
Program Information, 38
Status Information, 38
Technical Specifications, 81
Version 6/2/2008
84
www.VIZIO.com
VIZIO SV420XVT1A User Manual
VIZIO LIMITED PRODUCT WARRANTY
VIZIO provides a “ONE-YEAR LIMITED WARRANTY” against manufacturing defects in materials and workmanship to the
original purchaser of a new VIZIO display purchased from an authorized VIZIO U.S. reseller and used in the fifty (50) United
States or Puerto Rico.
VIZIO’s Responsibility
VIZIO displays purchased new from an authorized VIZIO U.S. reseller and that are used in the fifty (50) United States or Puerto
Rico are warranted to be free from manufacturing defects in materials and workmanship for one (1) year from the date of the
original retail purchase. If the display fails to conform to this limited warranty, VIZIO will, at its option and sole discretion, repair or
replace the display.
Labor
During the one-year limited warranty period, VIZIO will provide, when needed, service labor to repair a manufacturing defect.
Repairs required on displays which are thirty (30) inches and larger generally will be made “on-site” where the display is installed.
The determination for performing the on-site repair is dependent upon the manufacturing defect and is at VIZIO’s option and sole
discretion. Repairs required on displays which are less than thirty (30) inches generally will be performed at a VIZIO service
center.
Parts
Repairs may be made with new or recertified parts, or the entire unit may be replaced with a new or recertified unit, at VIZIO’s
option and sole discretion. Replacement parts or replacement units provided under this limited warranty are warranted for the
remaining portion of the original warranty period, or for ninety (90) days from warranty service or replacement, whichever is later.
How to Obtain Warranty Service
To obtain warranty service, contact VIZIO Technical Support via email at TechSupport@VIZIO.com, via phone at 877-MYVIZIO
(877-698-4946), or via postal mail at VIZIO Technical Support, 39 Tesla, Irvine, CA 92618. You must provide the model, serial
number, and date of purchase. VIZIO Technical Support is available from 6:00AM to 9:00PM Pacific Time, Monday through
Friday, and 8:00AM to 4:00PM Pacific Time, Saturday and Sunday. Please note that holiday hours may vary. For up to date
information, please visit www.VIZIO.com.
VIZIO reserves the right to assess all warranty claims and to determine if defects or damages are covered by this limited
warranty. In case of a claim that is not covered by this warranty, you will be contacted to determine whether VIZIO should repair
the damage for a fee or whether the product should be returned to you as received by the service technician or service center.
Parts and service labor that are VIZIO’s responsibility under this limited warranty will be provided without charge. All other
service is at the customer’s expense. VIZIO reserves the right to charge the customer for any service call for anything not
covered by this limited warranty. Before you ask for warranty service, please review your User Manual. You may avoid a service
call and a service charge.
Please refer to the reverse side of this page for additional information regarding how to obtain warranty service.
PLEASE DO NOT RETURN YOUR UNIT TO VIZIO WITHOUT PRIOR AUTHORIZATION.
Not Covered
This limited warranty does not cover the following: cosmetic defects; damage, malfunctions or failures resulting from shipping or
transit, improper or faulty installation, abuse, operation contrary to furnished instructions, operation on incorrect power supplies,
products not supplied by VIZIO, modification, alteration, improper servicing or tampering; damage from fire, water, lightning,
power surges, abnormal environmental conditions or other acts of nature; normal wear and tear; unsatisfactory visual or audio
performance not caused by a manufacturing defect; or displays with a missing or unreadable serial number. Operation of the
display for commercial purposes or in applications or uses for which the display is not intended is not covered by this limited
warranty. “Image Sticking”, caused by static images on the screen for extended periods and or excessive brightness and contrast
Version 6/2/2008
85
www.VIZIO.com
VIZIO SV420XVT1A User Manual
levels, is not covered by this limited warranty. Installation, removal, transportation and reinstallation of a display, and routine
maintenance and cleaning, are not covered by this limited warranty.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIO’S TOTAL LIABILITY
FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER, INCLUDING VIZIO’S
NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR
LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE DISPLAY. VIZIO SHALL NOT BE RESPONSIBLE
FOR LOSS OF USE, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR
CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. This is the only
warranty applicable; no one is authorized to extend or modify it or to grant any other warranty on VIZIO’s behalf.
Owner’s Responsibility
To ensure warranty service, keep the dated bill or sales receipt as evidence of the purchase date and location. This limited
warranty applies only to original purchaser and is non-transferable.
Warranty service conditions are subject to change. For the latest Warranty Terms and Conditions and additional information
regarding VIZIO’s Limited Product Warranty, please see complete details online at www.VIZIO.com.
Version 6/2/2008
86
www.VIZIO.com
VIZIO SV420XVT1A User Manual
VIZIO RETURN POLICY
VIZIO’s return policy allows for products purchased directly from VIZIO to be returned by the original purchaser during the initial
thirty (30) day period following the date of purchase. A VIZIO return authorization number must first be obtained as provided
below. The refund will be the purchase price actually paid by the purchaser less a ten percent (10%) restocking fee per each
item returned. Shipping and handling are not refundable.
The return authorization number must first be obtained from VIZIO’s Customer Service by emailing
CustomerSupport@VIZIO.com or by calling 949-428-2525, 6:00AM to 9:00PM Pacific Time, Monday through Friday, and
10:00AM to 2:00PM Pacific Time, Saturday and Sunday. Please note that holiday hours may vary. For up to date information,
please visit www.VIZIO.com.
Products must be returned to the address specified by VIZIO Customer Service and must be shipped in the original packaging,
with freight prepaid to VIZIO, and must be received in new and unused condition. The return authorization number must be
included in the packaging. VIZIO reserves the right to assess fees for any damaged or missing parts in addition to the ten
percent (10%) restocking fee.
Return authorization numbers are valid for only fifteen (15) days from issuance. The customer is responsible for and must prepay
all shipping charges and shall assume all risk of loss or damage to the product while in transit to VIZIO. If the product is returned
to VIZIO (i) without a VIZIO return authorization number, and/or (ii) beyond the fifteen (15) day period, and/or (iii) without proper
packaging, VIZIO retains the right to refuse delivery of such return or may return the unit to the customer at the customer’s
expense and with no refund issued. This return policy does not apply to defective products. Please read VIZIO’s Limited Product
Warranty for warranty terms and conditions.
ON-SITE WARRANTY
REPAIR PROCEDURE
On-Site Warranty Repair generally is performed on repairable displays which are 30 inches
and larger.
If VIZIO Technical Support determines that a problem with a display unit may be within the terms and conditions of the VIZIO
Limited Product Warranty and that an on-site repair may be performed, the customer will be provided with an on-site repair
authorization number and on-site repair instructions. The determination for performing the on-site repair may be dependent upon
the manufacturing defect and is at VIZIO’s option and sole discretion. Proof of purchase is required to confirm the product is
within the one-year limited warranty period and meets the terms and conditions of the VIZIO Limited Product Warranty.
On-site repair service is requested through VIZIO’s third-party service provider. After VIZIO provides the customer with the onsite repair (OSR) authorization number, the third-party service provider will contact the customer and will schedule the repair at
the customer's location. The total approximate time for the repair process, which includes the repair diagnosis, dispatching the
technician, shipping the replacement part(s), and arranging the appointment with the customer, is completed within
approximately 3 to 5 business days, pending availability of these factors.
If it is determined the product can not be repaired on-site, the customer will be required to ship the unit to VIZIO’s service center,
per the below warranty replacement procedure.
VIZIO is not responsible for the de-installation or re-installation of the product. However, some standard installation may be
performed during the on-site repair, at VIZIO’s option and sole discretion. Please read VIZIO’s Limited Product Warranty for
warranty terms and conditions.
WARRANTY REPLACEMENT PROCEDURE
Warranty Replacement generally is performed on displays which are determined to be
economically unrepairable.
If VIZIO Technical Support determines that a problem with a display unit may be within the terms and conditions of the VIZIO
Limited Product Warranty and that a repair is not economically possible, based on certain manufacturing defects in materials
and/or workmanship, and/or at VIZIO’s option and sole discretion, the customer will be provided with a return authorization
number and replacement instructions. Proof of purchase is required to confirm the product is within the one-year limited warranty
period and meets the terms and conditions of the VIZIO Limited Product Warranty.
Version 6/2/2008
87
www.VIZIO.com
VIZIO SV420XVT1A User Manual
For displays forty-two inches (42”) and larger, VIZIO will generally cover the transportation charges to perform an on-site swap of
the original unit with the replacement unit. For displays under forty-two inches (42”), the customer is responsible for the
transportation charges to VIZIO’s service center. VIZIO will be responsible for the return transportation charges from the service
center to the customer. Please read VIZIO’s Limited Product Warranty for warranty terms and conditions.
MAIL-IN WARRANTY REPAIR PROCEDURE
Mail-In Warranty Repair generally is performed on displays which are smaller than 30 inches.
If VIZIO Technical Support determines that a problem with a display unit may be within the terms and conditions of the VIZIO
Limited Product Warranty and that a mail-in repair may be performed, the customer will be provided with a return authorization
number and mail-in repair instructions. Proof of purchase is required to confirm the product is within the one-year limited
warranty period and meets the terms and conditions of the VIZIO Limited Product Warranty.
The customer will be provided with instructions for packing and shipping the unit to the VIZIO service center. The original carton
box and packing material, or an equivalent as designated by VIZIO, must be utilized. The cost of shipping to VIZIO’s service
center is at the customer's expense. After the product is repaired and tested, the VIZIO service center will ship the unit back to
the customer at VIZIO’s expense. VIZIO is not responsible for the de-installation or re-installation of the product. Please read
VIZIO’s Limited Product Warranty for warranty terms and conditions.
PLEASE DO NOT RETURN YOUR UNIT TO VIZIO WITHOUT PRIOR AUTHORIZATION.
Version 6/2/2008
88
www.VIZIO.com
VIZIO SV420XVT1A User Manual
Component Program Codes
Setup Codes for VCRs
ABS
Admiral
543 549 553 569
Adventura
452 459
Aiko
551 554
Aiwa
452 459 460 536
539 552 571 578
Akai
442 457 570
Alienware
458
America
Action
551 567
American
High
449 538 555
Amoisonic
552
Anam
Anam
National
Asha
539 548 550 551
445 550 560
443 579
Audiovox
446 460 539 551
567
Beaumark
Bell & Howell
527
445 550 560
444
451 482 487 526
537 549 552 558
Broksonic
Calix
559
446 460 539
Candle
445 446 447 448
Canon
449 538 555 572
Carver
547 561
CCE
445 446 447 448
460 525 539 551
Citizen
554
Colortyme
443
Colt
Craig
Curtis
Mathes
Cybernex
CyberPower
543 547
CineVision
505
Setup Codes for VCRs
ESA
Fisher
Fuji
555 578
445 550 560
458
563
Davidson
459
DBX
443 579
Dell
458
Denon
575
470
444 450
442 449 538 555
Fujitsu
542
Funai
452 459 485 488
500 522 556 578
Garrard
452 459
Gateway
458
441 443 445 448
449 538 544 548
Daewoo
441 445 449 524
538 544 550 555
GE
560 569
General
542
Go Video
495 507 560
Goldstar
443 446 448 460
539 540 549
Gradiente
Haojie
Harley
Davidson
Harman/Kar
don
452 459 578
550
452 522
443 540 547 561
DiamondVisi
on
520
Dimensia
441
Headquarter
444
DIRECTV
574
461 540
Hewlett
Packard
458
452 459
Hi-Q
450
Durabrand
Dynatech
Electrohome
446 460 539
Electrophoni
c
446 460 539
Emerex
576
446 447 449 451
452 459 460 488
500 512 515 525
526 538 539 541
542 549 550 551
552 556 558 559
Emerson
Version 6/2/2008
562
447 451 452 505
525 542 551 554
546 551 554 562
Changhong
523 546 562
445 446 450 460
539 546 550 560
548
Audio
Dynamics
Bang &
Olufsen
Setup Codes for VCRs
458
573 577 578
89
www.VIZIO.com
Harwood
Hitachi
546 562
454 457 459 500
522 539 572 575
Howard
Computers
458
HP
458
Hughes
Network
Systems
574 575
Humax
574
Hush
458
iBUYPOWER
Insignia
458
478 506
VIZIO SV420XVT1A User Manual
Setup Codes for VCRs
Instant
Replay
JC Penney
JCL
Jensen
449 572
443 444 445 446
449 454 579
449
454 457
443 444 448 457
465 475 476 496
JVC
542 545 579
KEC
460 539 551
Kenwood
KLH
443 444 448 457
540 545 579
546 562
Kodak
446 449 460 538
539 555
Kolin
541
446 478 480 506
539 540 542 549
LG
578
Linksys
458
Lloyd's
Logik
LXI
Magnasonic
Setup Codes for VCRs
452 459 522
444 445 446 449
450 452 456 459
538 548 555 557
564 565 572
460 461 462 487
518 521 538 539
460 524 538 539
540 550 555 560
543 548 549 550
552 553 555 560
Memorex
MGA
MGN
Technology
Setup Codes for VCRs
569 571
524 541 550 560
Penney
575 577
Pentax
454 575
Pentex
Research
Philco
458
Philips
Midland
453
Mind
458
Philips
Magnavox
454 575
449 538 552 555
572
449 488 499 509
534 538 547 555
445 550 560
Microsoft
Minolta
448
Pilot
561 572 574
509
446 460 539
Mitsubishi
454 466 541 545
569
Pioneer
Motorola
449 538 543 553
555 569
Polaroid
510 519
Polk Audio
547 561
MTC
445 459 550 560
Multitech
445 452 453 459
546 562 578
546 562
446 460 539 578
443 444 448 457
538 539 540 543
525 556
NEC
545 579 580
454 483 545 572
579
Presidian
488
Profitronic
550 560
Proscan
441 544 572
Protec
546 562
Pulsar
456 461
Pye
485
Qisheng
544
Quarter
444
Quartz
444
Quasar
449 521 531 538
548 555 572
449 456 459 461
486 509 512 515
Newave
Magnavox
522 534 538 547
555 556 561 572
Niveus Media
Magnin
446 524 550 560
Northgate
458
Radio Shack
446 459 522
Olympic
572
Olympus
449 538 555
Radio
Shack/Realis
tic
444 445 446 449
450 452
443 444 448 449
538 547 555 561
Marantz
Marta
Nikko
Noblex
579 580
Media Center
PC
MEI
446 460 539
458
445 550 560
446 460 521 539
543 548 553 556
446 460 539
Optimus
Matsushita
539
449 538 548 555
Radix
446 460 539
Randex
446 460 539
557 569
Orion
462 526 549 552
558 559
Panasonic
449 463 479 481
497 514 521 531
441 445 449 454
501 503 524 533
458
449 538 555
Version 6/2/2008
90
www.VIZIO.com
RCA
538 544 550 560
569 572 575
VIZIO SV420XVT1A User Manual
Setup Codes for VCRs
Setup Codes for VCRs
444 445 446 447
449 450 452 459
Stack
458
Stack 9
458
STS
449 575
512 515
Realistic
460 538 539 543
553 555 569 578
Superscan
ReplayTV
564
Ricavision
458
Runco
456 461
Sampo
539 543
449 452 459 488
500 504 512 515
532 538 541 547
555 556 561 572
Sylvania
445 447 453 477
491 493 495 508
Samsung
517 528 542 550
560 563 570 574
Sanky
456 461 543 553
569
Setup Codes for VCRs
Video
Concepts
Videomagic
460 539
Videosonic
445 550 560
Viewsonic
458
Villain
459
Voodoo
458
445 446 447 449
450 452 454 459
578
Symphonic
452 459 488 500
522 556 578
Systemax
458
Tagar
Systems
458
Tandy
444
443 447 542 563
579
538 543 544 546
547 550 553 555
Wards
560 561 562 569
575
Westinghous
e
562
White
Westinghous
e
500 546 549
457 459 462 484
487 522 526 545
Tashiko
446 539
Tatung
457 542 545
Sansui
549 552 558 579
Teac
452 457 459 578
Technics
449 538 548 555
565
XR-1000
449 452 459 538
546 555 562
Sanyo
444 445 450 511
524 550 560
Teco
538 539 540 543
Yamaha
443 444 448 457
540 579
Scott
447 451 541 542
559 563
444 446 449 450
454 459 460 522
Teknika
446 449 452 459
460 538 539 555
Thomas
459 522
Sears
538 539 555 575
578
468 485 502 516
529 543 549 553
Sharp
442 546 562
Shogun
445 550 560
Signature
2000
Singer
Sonic Blue
578
449 546 562
564
442 455 458 459
464 467 471 472
473 489 492 522
535 538 555 568
Sony
576
Version 6/2/2008
Zenith
ZT Group
Tivo
566 568 574 581
TMK
445 550 560 577
569
Shintom
442 456 459 461
470 478 522 526
447 454 458 469
474 490 494 498
Toshiba
513 530 541 542
545 563 566 581
Totevision
445 446 460 539
550 560
Touch
458
Unitech
445 550 560
Vector
542 563
Vector
Research
Victor
443 447 540 579
443 545 579
91
www.VIZIO.com
549 552 558
458
Setup Codes for PVRs
ABS
410
Alienware
410
AT&T
398
Bang &
Olufsen
413
CyberPower
410
Dell
410
399 400 401 402
405 408 411 414
DIRECTV
416 417 418 421
422
Dish
Network
406 407
Dishpro
406
Echostar
406 407
Expressvu
406
Gateway
410
VIZIO SV420XVT1A User Manual
Setup Codes for PVRs
GOI
406
Hewlett
Packard
410
HNS
405
Howard
Computers
410
HP
410
HTS
406
401 402 405 408
Hughes
Network
414 416 417 418
Systems
421 422
Humax
405 414
Hush
410
iBUYPOWER 410
JVC
406 407 414
Linksys
410
Media Center
PC
410
Microsoft
410
Mind
410
Niveus Media 410
Northgate
410
Panasonic
398 420
402 405 408 414
Philips
416 417 418 419
RCA
405 411 414 416
ReplayTV
398 404 412
Samsung
405 416 418
Sonic Blue
398 404 412
Sony
403 409 410 415
Stack 9
410
Systemax
410
Tagar
Systems
410
401 403 405 409
Tivo
414 415 416 419
421 422 423
Toshiba
410
Touch
410
UltimateTV
411
Viewsonic
410
Voodoo
410
ZT Group
410
Setup Codes for Cable
Converters
Americast
Antronix
Setup Codes for Cable
Converters
001 002 008 010
011 024 025 027
031
004 005
Archer
005
AT&T
042
Bell & Howell
002
Bell South
031
Jerrold
028 037 063 159
161 163 164
KNC
160
LG
162
Magnavox
012
Memorex
013 026
Cable Vision
038 039
Monarch
058
Cabletenna
004
Motorola
028 033 037 042
061 062 063 163
Cableview
003
Citizen
058
Clearmaster
164
Movie Time
014 058
030
Multi Canal
058
ClearMax
030
Multitech
030
MultiVision
161
Colour Voice
007
Comcast
040 061 063
Comtronics
058
Contec
053
Coolmax
COX
Daeryung
NEC
002
NET Brazil
043
Novavision
049
NSC
014
030
Pace
044 045 046 047
048 049 051
063
Panasonic
023 026 034 160
049 160 165 168
Panther
166 167
Digi
166 167
Paragon
Director
063 164
Dumont
167
Philips
026
006 007 012 015
016 017
Pioneer
038 044 045 049
059 060 162
Everquest
Focus
027 058
029
GC
Electronics
005 058
GE
000 001
Gehua
164
Gemini
008 027
001 025 028 037
040 063 159 163
General
Instrument
Popular
Mechanics
029
Proscan
000 001
Pulsar
026 058
Quasar
026
Radio Shack
RCA
027 030
003 021 023 025
164
Realistic
005
Goldstar
058 059 162
Recoton
029
Hamlin
009 018 035
Regal
Hitachi
001
053 159
Illico
038
Adelphia
049
Jasco
027
Admiral
160
Setup Codes for Cable
Converters
000 001 002 024
026 046 049 051
ABC
Version 6/2/2008
92
www.VIZIO.com
009 018 035
Rembrandt
001
Rogers
038
Runco
026
VIZIO SV420XVT1A User Manual
Setup Codes for Cable
Converters
Samsung
Scientific
Atlanta
Signal
058 059 060 162
038 042 044 045
046 049 050 051
Vortex View
Zenith
022 026 031 036
052 053 054 055
056 057 160 165
Zentek
029
008 027 058
Signature
001
SL Marx
058
Sony
Sprucer
Standard
Component
023
019 020
008 024 027 159
Stargate
008 027 058
Starquest
008 027
Supercable
028 163
Supermax
030
TeleView
058
Setup Codes for Satellite
Receivers
Alphastar
038 041
Timeless
058
159
Drake
Echostar
Expressvu
Freecom
147
081
086
095
108
114
121
126
131
065
069
073
077
084
149
LG
085
094
107
113
118
125
127
132
066
070
074
078
087
128
133
067
071
075
079
110
130
156
068
072
076
080
124
151
NEC
152
Next Level
105
Panasonic
107 130 140
Pansat
134
Paysat
104
081 082 089 104
109 111 123 156
Philips
157
Pioneer
082
Primestar
101
106
065 084 087 110
117 124 149
Radio Shack
105
085 089 090 096
108 119 120 121
RCA
122 139 142 144
Realistic
100
081 082 089 127
129 145
087 110 117
151
108 132
General
Instrument
099 105
GOI
110
Goodmans
146
Videotron
038
Grothusen
151
View Star
012 014
Hisense
106
HTS
Hughes
Network
105 112 153
Muratto
098
GE
Hitachi
Motorola
086 108 125
151
Version 6/2/2008
083
089
104
111
116
123
Proton
GoldStar
030
082
088
096
109
115
122
151
Proscan
030
Vision
094 151
087 110 149
V2
030
151
109 118 141
Crossdigital
TS
Viewmaster
Lenco
104
Dishpro
004 005
151
Memorex
030
Universal
065 084 110 124
Mitsubishi
163
024
JVC
Kosmos
135
Tristar
United Cable
105
Coolsat
Trans PX
004 005
106
081 104 157
Dish Network
053
Ilo
Jerrold
Magnavox
026
014
138
097
Toshiba
TV86
Humax
Chaparral
010 161
008 027
131
137
159
Tusa
Systems
CaptiveWorks
Torx
Unika
102
Setup Codes for Satellite
Receivers
Lorraine
DIRECTV
TIME
WARNER
U. S.
Electronics
030
032 039
Starcom
Tocom
Setup Codes for Cable
Converters
111 150 158
110
081 082 089 095
109 115 118 126
93
www.VIZIO.com
Samsung
Sanyo
148
SatPartner
151
Sharp
143
Silva
151
SKY
153
083 088 091 092
113 128
Sony
Star Choice
105
VIZIO SV420XVT1A User Manual
Setup Codes for Satellite
Receivers
Setup Codes for DVD
Players
Setup Codes for DVD
Players
STS
103
BOSE
174 345 353
Gradiente
001 183
Sylvania
064
BOSS
288
Greenhill
017
Grundig
012
Tivo
Toshiba
Triad
UltimateTV
Uniden
081 082 089
Broksonic
168 259
Harman/Kar
don
109 111 131 154
California
Audio Labs
151
083 085
104 155 157
CambridgeSo
undWorks
382
US Digital
106
USDTV
106
Changhong
426 433
Viewsat
136
CineVision
277
Voom
105
Clarion
175
Zenith
093 114 153
Classic
Coby
148 176 375
005 064 121 137
307 358
Curtis
358
Curtis
Mathes
025
Setup Codes for DVD
Players
Accele Vision
Advent
100
004
CyberHome
312 439
Akai
168 319 320 323
Alco
003
Allegro
028
Denon
077 277 440
001 051 096 119
131 374
Alpine
160
Desay
182
Daewoo
DiamondVisi
on
167
AMW
167
Anaba
Apex Digital
029
015
063
098
366
Apple
289
Emerson
Arrgo
019
Enterprise
Aspire
006
ESA
Astar
243
Fisher
170
003 058 161 304
305 314 381
Fun TV
031
Audiovox
Axion
325
Bang &
Olufsen
018
Blaupunkt
Blue Parade
017 047 054
079 090 093
114 223 291
433
017 095 287
013
Version 6/2/2008
015
iLive
393
Ilo
299
Initial
189 331 341
016 071
Dual
030
Durabrand
020
DVD2000
010
Eclipse
286
000 016 021 177
302 335 376
021 072 250 380
Integra
013 023 426
Irradio
231
Jamo
032
JBL
361
Jensen
005
014
084
153
218
057
120
193
219
065
146
216
256
JVC
328 372 373
Jwin
033
082
147
217
257
Kawasaki
003
001 051 128 141
154 155 164 165
Kenwood
309 327
KLH
Konka
Koss
003 017 078 186
290
002 007 087 356
Lasonic
178
Lenoxx
020
Lexicon
034
072 214 233 238
250 296 316 370
022
021 169
017 299
Insignia
322
Amphion
MediaWorks
Disney
Hiteker
019 044 430 431
432 435 436
Aiwa
Cytron
Hitachi
138 361
083 159 196 278
310
001
LG
394
Liquid Video
007
016 021 248 263
Liteon
222 224 227 247
224 434 437
Lite-On
437
GE
011 017 060 104
Loewe
Go Video
054 113 159 224
279 280 282 285
Magnavox
Goldstar
285
035
000
021
226
299
Funai
Gateway
GPX
185 358 367
94
www.VIZIO.com
009
045
252
302
012
061
264
335
016
086
273
349
VIZIO SV420XVT1A User Manual
Setup Codes for DVD
Players
364
Setup Codes for DVD
Players
Prima
326
000 016 021 081
234 248 274 292
Marantz
012 149 150 162
Princeton
037
Memorex
071 081 166 339
Proceed
015
Microsoft
011
Proscan
011 060 115
Mintek
Mitsubishi
NAD
017 161 299
010 074 092 099
129
179
Nesa
017
Next Base
024
Nexxtech
184
Norcent
031
Oppo
187 330
Optiview
029
Oritron
002
001
110
143
197
297
334
Philips
007
009
112
144
237
300
346
051
123
195
272
306
347
056
142
196
396
333
350
357 385 386 387
388 389 395
027
009
061
105
135
231
295
012
081
107
157
235
299
356
013
089
133
198
360
059
094
139
203
016
091
127
191
240
317
075
108
156
204
045
102
134
202
273
326
085
132
192
205
Pioneer
236 260 344 368
Polaroid
167 283 308 321
324 340 433
Polk Audio
002
003
052
115
276
Rio
028
014
Sampo
180
001
158
221
251
270
351
012
Samsung
Sansui
Sanyo
Sensory
Science
Sharp
Sharper
Image
Version 6/2/2008
136
196
239
269
337
390
Techwood
173
Terapin
040
Theta Digital
013
Tivo
041
009
070
168
201
212
229
Toshiba
029
Urban
Concepts
009
038 435
026
008
053
088
206
265
343
Sony
392
181
V Inc.
424 425
Venturer
003 379
Vizio
043
Westinghous
e
301
Xbox
028
048
055
122
207
268
348
049
068
140
208
311
352
000 335
039
95
www.VIZIO.com
050
076
163
253
342
391
045
106
194
209
213
230
062
109
199
210
215
245
066
126
200
211
228
254
255 266 293 294
298 303 332 377
TView
224
016 069 080 118
220 241 242 262
275 313 336 383
428
037
SVA
428
103
190
232
267
282
363
001 051
170 246 284 378
Sigma
Designs
Sungale
427
073
159
225
258
281
354
Technics
042
008
Superscan
017
101
271
338
044
Shinsonic
036
013
067
188
315
Tredex
172
016
011
060
130
314
016 081
003 161 424 429
438
Trutech
Shinco
Portland
Teac
397
384
Presidian
Symphonic
302 329 335
168 261 318
Sherwood
Sonic Blue
Sylvania
355
Rotel
151 171
009 023 097 116
117 362 371 426
Philco
Qwestar
RCA
Onkyo
Panasonic
263
072 177
Nakamichi
Nissoho Iwai
Pye
Setup Codes for DVD
Players
Yamaha
011
001 012 046 051
111 124 127 145
152 244 273 365
369
Zenith
009 072 125 249
250 285 359 370
Setup Codes for Audio
Tuners and Receivers
ADC
049
Adcom
098 148
Admiral
075
ADS
076
Aiwa
048 114 133 164
VIZIO SV420XVT1A User Manual
Setup Codes for Audio
Tuners and Receivers
Setup Codes for Audio
Tuners and Receivers
Akai
073
Alco
058
Glory Horse
Altec Lansing
072
Gradiente
GPX
Harman/Kar
don
069
048 055 145
Hitachi
060
AMW
059
iLive
224
Anam
052 074
Inkel
064
Apex
191
Insignia
210
Arcam
068
Integra
047
Audiophase
Audiotronic
Audiovox
163
053
058 159 211
B&K
150
Bang &
Olufsen
156
BOSE
Boston
Acoustics
Jensen
165 174
Kenwood
056 090 091 094
101 103 116 122
KLH
058
Koss
057 180
Lenoxx
Capetronic
049
Carver
048 053
Casio
140 168 193
Polaroid
158
054 195 223 227
048 151
Proscan
306
Qisheng
305
Quasar
115
Radio Shack
069
RCA
049 051 052 058
155 179 306
Realistic
065
Regent
071
Rio
061
Rotel
071
162
049 051 085 088
096 099 129 132
Samsung
149
187 221 225 226
230
048
Sansui
048
Sanyo
060 208
Magnavox
065
048 049 053 173
189
Sharp
147 213
Marantz
048 053 152 154
Lloyds
212
078
JVC
Linn
CambridgeSo
undWorks
055 185
048 053 161 180
184 202
Pioneer
Polk Audio
087 097 104 109
128 198 199
LG
063
Philips
Magnavox
166
059
JBL
Philips
192 200
Amphion
Media Works
Setup Codes for Audio
Tuners and Receivers
Sharper
Image
069
MCS
066
065
Sherwood
Memorex
079
CCE
081
Silsonic
303
Mitsubishi
146
Clarinette
065
Sonic Blue
Modulaire
065
Classic
205
Nakamichi
045 046
Coby
182
Nexxtech
Creative
067
Curtis
200
062
047 089 092 093
112 117 118 186
061
082
100
113
171
Dell
070
102
120
139
203
Denon
Eclipse
Emerson
Onkyo
110 111 119
121 127 138
141 142 143
304
Optimus
049 050 051 052
Oritron
Panasonic
057
115
170
177
215
219
307
Penney
Philco
153
157 206
ESA
077
Fisher
060
Fonmix
304
Version 6/2/2008
197
130
172
181
216
220
160
175
196
217
228
169
176
201
218
229
131 214
Sony
231
Soundesign
050
Stereophonie
s
051
Sunfire
056
Symphonic
075
Teac
083
106
124
178
084
107
125
188
052 058
Technics
105 115 307
065
Thorens
053
080
Toshiba
204 207
96
www.VIZIO.com
086
108
167
222
VIZIO SV420XVT1A User Manual
Setup Codes for Audio
Tuners and Receivers
Venturer
058 209
Victor
087
Wards
048 140
047 095 123 126
134 135 136 137
Yamaha
Yorx
Zenith
144 190 194 303
065
054 183 195
Setup Codes for Audio
Amplifiers
Accuphase
010
Acurus
011
Adcom
034
Angstrom
012
Aragon
011
Audio Source
013
Bel Canto
Design
Setup Codes for Audio
Amplifiers
Setup Codes for TVs
Addison
497
004
Admiral
002 020 032 038
498
JBL
030
Advent
041 045
JVC
002
Adventura
Harman/Kar
don
Knoll
Systems
021
Krell
037
Left Coast
004
Logitech
022
Luxman
023
Marantz
004 041
Mark
Levinson
024
McIntosh
025 040
021
Adyson
508 509
Agashi
508
Aiko
009 497 508 511
Aiwa
190 194 451 491
003 029 042 044
076 077 078 079
080 081 082 083
084 428 457 493
Midland
026
Nakamichi
308
Akai
NEC
005
Alaron
Nikko
027
Alba
507 508 511
508
508 511
Onkyo
033
Albatron
Optimus
001
Alleron
012
014
Parasound
042
Biamp
015
Philips
004
America
Action
035
BOSE
003
Pioneer
001 031
Amplivision
509
Amstrad
511
Amtron
011
California
Audio Labs
Cary Audio
Design
Chase
Technologies
006
009
Polk Audio
004
RCA
001
Realistic
309
Sansui
309
Anam
Shure
005
Sony
029 044
Anam
National
007
Soundesign
000
Cinema
Sound
016
Soundmatter
s
043
Classe
017
Curtis
Mathes
Soundstream
028
001
Victor
002
Denon
035 036
Wards
Yamaha
Digital Audio
Control
008
Durabrand
018
Elan
019
Fosgate
020
GE
000
Version 6/2/2008
035 504 511 524
004 011 504
Anglo
511
Anhua
494 512
Anitech
511
Ansonic
511
005 006 029 071
082 083 084 298
000
032 038 039
Setup Codes for TVs
888
024 025 524
517
Abex
019
Acer
376
Acura
511
97
www.VIZIO.com
AOC
329 493 496 497
498 502 505
Aolinpiya
517
Aolinpu
515
033 040 046 139
172 249 276 432
Apex Digital
526
VIZIO SV420XVT1A User Manual
Setup Codes for TVs
Arcam
508 509
Astar
330
Astra
511
Asuka
508
Atlantic
508
Atori
511
Audiosonic
511
011 035 037 274
290 310 328 442
Setup Codes for TVs
Carnivale
Carver
Cascade
CCE
Celebrity
Celera
ChangCheng
029 082 083 493
031 527
511
051 217 509
003 492
040
494 506 512 513
514 516 517 518
Changfei
514 516
034
Changfeng
514 517
Awa
508
Changhai
514 516
Axion
453
Baihua
516 517
Audiovox
448 497 505
Aventura
Baile
506 513 516
Changhong
040 501 514 516
518
Chengdu
514
Ching Tai
497
Chun Yun
025 035 492 497
524
Chunfeng
516 517
Bang &
Olufsen
049
BaoHuaShi
517
Baosheng
514 516
Basic Line
511
Chung Hsin
035 495
Baysonic
035
Chunsun
514 516
Beijing
506 513 514 516
517 518
Belcor
329
Bell & Howell
002 013 521
Benq
026 314 331
Binatone
509
Boots
509
Broksonic
CMS
006 007 021 029
082 083 084 329
493
Version 6/2/2008
CS
Electronics
508
CTX
209
Curtis
084
001 006 013 017
018 029 030 031
032 037 042 043
044 080 082 083
Curtis
Mathes
329 493 496 498
499 505 520 521
527
116 124 250 329
358 421 483 493
Coby
515 526
011 015 035 511
082 083 329 483
493 496 497
509
Cailing
Candle
Citizen
CME
514 516
Crown
005 006 009 018
037 071 084 094
511
Caihong
031 527
006 007 009 011
017 018 029 042
Clatronic
220
Crosley
214 459
329
byd:sign
011 035
Cytron
084
511
Craig
507
Classic
Bush
008 011
511
Cinema
035
035 038 081 084
151 428 484 503
Cosmel
011 035
508
Brockwood
Contec/Cony
035 508 511
CXC
511
Britannia
Contec
499 501 516 517
511
City
011 035
Conrowa
Cimline
Clarion
Bradford
Setup Codes for TVs
Colortyme
Colt
Daewoo
497 502 505 506
507 508 511 524
Dainichi
508
Dansai
508
508
Daytron
006 018 329 511
446
Dayu
006 082 329
480
Dell
Denon
Diamond
Commercial
Solutions
030 525
Concerto
006 329
Concorde
511
Condor
508
98
www.VIZIO.com
DiamondVisi
on
506 513
086 320
043 053 499
508
221 467 477
Dimensia
001
Dixi
511
VIZIO SV420XVT1A User Manual
Setup Codes for TVs
Setup Codes for TVs
Setup Codes for TVs
DongBao
518
Feiyue
514 516
Gradiente
082 218 510
DongDa
516 518
Fenner
511
Granada
509
Fidelity
508
Grandin
511
Grunpy
011 012 035
Donghai
516
DongHua
518
DTS
511
Dual Tec
509
Dual-Tec
511
Dumont
Durabrand
028 171 329
027 034 035 038
210 502
Dwin
032
Dynatech
509
ELECTRO
TECH
Electroband
511
003 492
Electrograph
377
Electrohome
003 004 006 082
084 329
Element
334
Elin
508
Elite
385
Elta
508 511
FIRST LINE
511
Firstar
503
Firstline
Fisher
013 163 318 381
509 521
Formenti
508
Formenti/Ph
oenix
508
Fortress
082 498
Frontech
511
Fujitsu
012 361 369 370
Funai
011 012 034 035
113 380 479
Furi
Futuretech
Ganxin
Gateway
GBC
006 008 010 011
012 013 018 023
499
011 035
494 497 502 505
525
Emprex
338
511
Envision
006 029 082 083
329 493
General
Technic
Gibralter
028 029 082 083
171 329 493
GoldHand
508
Ether
493
Etron
511
Euroman
508
Europhon
508
Feilang
516
Feilu
Feiyan
514 516
517
Version 6/2/2008
508
Hallmark
006 084 329 502
Hampton
508
Hankook
035 493 502
Hanseatic
511
Hantarex
511
Harley
Davidson
479
Harman/Kar
don
011 035
Havermy
032 498
Hello Kitty
071 082 083 084
329 482 493 502
Goodmans
508 509 511
509 511
99
www.VIZIO.com
037 505
Hewlett
Packard
285 349 365 426
Higashi
508
Hinari
511
Hisense
319 499 501 523
526
006 008 043 095
101 141 173 181
186 200 227 279
329 353 360 389
390 400 411 412
479 493 497 499
Hitachi
005 006 008 018
019 029 061 062
Goldstar
031 084 527
Harvard
374
511
034
516
Halifax
Helios
511
Geloso
ESA
Halhong
047 377 423
521
299
514 517
511
Emerson
Epson
518
HCM
092 108 111 139
329 416 481 493
GE
Haiyan
027 052
514
001 004 006 014
030 037 084 090
034 035 038 082
084 094 321 329
344 456 468 471
483 484 502 503
508 509
Haier
HaiHong
Hitch Fufian
Hongmei
Hongyan
HP
501 502 509
514 517
498 514 516 517
514 517
085 285 340 365
426
VIZIO SV420XVT1A User Manual
Setup Codes for TVs
Huafa
499 516
Setup Codes for TVs
Jean
494 497 501 503
514 516
Jensen
006 045 082 212
329
Jiahua
494 512
Huanglong
516
JiaLiCai
516 517 518
Huangshan
514 516 517
Jinfeng
494 512 514
Huanyu
508 514 517
Jinque
514 516 517
Huanghaimei
Huanghe
Huaqiang
516
517
Jinta
Huari
499 517
Jinxing
Huodateji
494 512
Juhua
514 517
Hyper
508
008 014 143 183
185 187 204 251
508 511
ICE
508 509 511
ICeS
508
JVC
Ilo
IMA
263 278 280 406
445 495 510
326 336 344 455
Kaige
514 516 517
011
Kaisui
508 509 511
Kamp
508
Imperial
Crown
506 513 517
Infinity
015 031 527
Kangli
506 513 514 516
517
InFocus
425
Kangyi
516 517
Ingersol
511
KanLi
518
Initial
455
Karcher
511
Inno Hit
511
Kawasho
003 006 329 508
Innovation
Insignia
511
KEC
210 213 215 222
337
Inteq
028
Kenwood
Interbuy
511
Kingsley
035
040 046
011 021
508
Intervision
509
Kloss
Novabeam
Irradio
511
Kolin
035 495 500
ITS
508
Kongque
514 516 517
ITT
511
Konka
429
ITV
511
Koyoda
511
Janeil
021
001 005 006 007
014 017 018 019
JC Penney
JCB
011 018 029 035
051 082 083 493
071 084 329
003 492
Version 6/2/2008
KTV
511
Lenoir
511
005 024 056 057
058 059 060 063
064 065 066 071
270 284 438 493
LG
496 502 508 511
524
Life
511
Lifetec
511
Lihua
514
Lloyd's
479
Loewe
015
Logik
002
Longjiang
514 517
Luxman
006 329
001 006 013 015
030 031 033 084
LXI
M Electronic
Magnafon
Magnasonic
501 502 521 527
509 511
508
082 084 483
006 007 015 029
031 082 083 084
508
KLH
015 031 527
Lenco
006 029 082 083
084 329 463 493
International
JBL
508
516 517
499 501 514 517
527
Hygashi
Setup Codes for TVs
Kyoto
114 128 130 134
162 175 179 256
298 324 329 379
404 435 455 465
Magnavox
468 479 489 493
527
Magnin
481
Magnum
511
Majestic
002
Manesth
509
509
Kuaile
516 517
Kunlun
494 506 512 513
514 517
100
www.VIZIO.com
006 015 029 031
082 083 307 329
Marantz
378 382 493 527
VIZIO SV420XVT1A User Manual
Setup Codes for TVs
Mark
Matsui
509 511
Matsushita
036 504
Maxent
324 377
Media Center
085
Medion
511
Megapower
Megatron
Meile
M-Electronic
Setup Codes for TVs
508
024 524
006 043 499 502
514 517
508
002 005 006 013
036 038 071 084
005 006 017 029
042 071 082 083
Otto Versand
MTC
084 329 493 496
508
Panama
MuDan
494 512 514 516
517
Multitech
011 035 051 508
509 511
Multivision
016
Murphy
508
NAD
521 528
516 517
Nansheng
514 517
National
494 522
004 005 006 029
071 082 083 309
Memphis
511
MGA
NEC
Net-TV
329 378 493 494
495 501 502
315 377
005 006 029 071
082 083 329 481
New Tech
493 500 502
Nicamagic
508
Nikkai
508
Nikko
006 009 029 082
083 493 497 502
Micromaxx
511
Microstar
511
Newave
Nobliko
508
Mintek
455
Norcent
039 298 526
Mitsubishi
Mivar
Monivision
Montgomery
Ward
Motorola
NTC
009 497
Nyon
084
Olevia
048 223 224 275
300
Onwa
011 035
Oppo
466
407 493 498 500
502 503 504
508
Optimus
022 036 478 504
520 521 528
024 025 524
Optoma
427
002
Optonica
020 032 498 519
Orion
010 023 038 210
484 503 511
Osaki
509
004 020 032 498
Version 6/2/2008
508
508 509 511
004 014 015 036
091 107 126 136
145 182 202 229
232 234 235 237
238 243 260 261
272 345 346 351
352 399 401 408
414 436 439 444
Panasonic
470 478 494 504
522 527 528
Panda
494 512 514 516
517
Pathe
Cinema
508
Pausa
511
029 030 033 042
082 083 481 482
497 498 502
014 018 019 028
030 171 494
228 233 329 371
388 396 403 405
509
511
Midland
005 006 032 071
082 084 129 153
Pael
006 022 033 501
502
Nanbao
113 180 475 478
482 500 502 511
Memorex
Setup Codes for TVs
101
www.VIZIO.com
Penney
493 494 496 501
502
Perdio
508
004 005 006 007
008 015 029 031
071 082 083 084
180 329 493 502
Philco
527
Philips
004 007 008 015
031 093 115 125
128 131 144 149
150 160 164 165
166 169 177 178
179 189 196 199
203 205 208 236
241 242 244 268
VIZIO SV420XVT1A User Manual
Setup Codes for TVs
286 291 313 329
344 350 418 437
455 489 492 493
494 497 502 527
115 125 128 131
134 144 164 175
Philips
Magnavox
179
Phoenix
508
Phonola
508
Pilot
018 029 082 083
329 493
Setup Codes for TVs
Qingdao
Quasar
Plasmsync
378
040 296 305 310
311 312 334 335
Polaroid
Poppy
Portland
Price Club
Prima
341 343 447 458
460 476
511
005 006 009 018
071 084 329 497
017
045 216 219 462
511
Radio Shack
502 521
Radio
Shack/Realis
tic
001 006 008 011
013 018 019 329
519
001 004 005 006
030 071 087 092
096 100 108 116
122 188 195 197
453 474 481 488
492 493 497 502
RCA
Realistic
525
Rhapsody
508
Roadstar
511
Rowa
508 526
Runco
028 029 082 083
171 493
Ruyi
514
Prism
014 494
514 516
Profex
511
Saisho
511
001 030 416 525
Prosonic
508 522
Protech
509 511
Proton
006 008 082 084
329 493 502
Protron
283 332
Proview
072 335
Pulsar
028 084 171 329
Pymi
511
Version 6/2/2008
454 485 493 496
497 501 502 508
509 511
Sandra
508
Sanjian
517
023 038 097 210
428 450 461 479
Sansui
006 018 019 029
082 083 211 252
484
013 154 163 318
329 381 481 499
Sanyo
501 508 521
Sanyuan
498 514 516
Sceptre
342
Scotch
006 502
013 029 035 082
083 493 502 521
Saige
Proscan
308 323 329 354
359 364 393 402
201 225 246 322
329 373 386 416
024 524
Princeton
239 262 266 269
292 293 303 304
504
013 029 030 035
082 083 479 493
347 348 360 366
368 384 385 394
520
133 137 140 159
168 174 184 207
004 014 036 126
202 414 478 494
006 022 089 098
226 230 240 329
Pioneer
Setup Codes for TVs
512 514 517
006 008 010 011
012 035 327 329
Scott
502 503
001 006 012 013
030 031 033 034
084 254 329 479
482 501 502 521
Sears
SEG
527
508 509
Semivox
035
Sencora
511
Serino
508
Sampo
316 329 377 493
497 498 502 524
Shancha
Shanghai
514 516 517
Samsung
005 006 008 017
018 019 029 042
Shaofeng
499 514
044 051 071 080
082 083 084 121
Sharp
102
www.VIZIO.com
514 517
006 008 018 020
032 088 105 117
VIZIO SV420XVT1A User Manual
Setup Codes for TVs
142 147 157 191
193 198 247 253
257 258 259 264
265 267 277 281
284 295 306 329
333 422 424 452
473 493 498 519
Shen Ying
Setup Codes for TVs
SSS
011 035 082 329
Standard
509 511
Starlite
011 035
Studio
Experience
025
Sunkai
511
Sunwood
511
Superla
508
Setup Codes for TVs
Technics
014 036 494 504
Techwood
006 014 082 329
494
Teco
054 494 497 498
502
002 005 006 007
008 009 011 012
017 018 031 035
042 071 329 496
497
Shencai
499 516 517
Superscan
Sheng Chia
032 498 503
SuperTech
508
Telefunken
Supra
511
Teletech
511
Teleton
509
ShengCai
518
Shenyang
514 516 517
Sherwood
516
Shogun
329
Signature
002
Silva
508
Silver
082 084
Simpson
007 082 084
Skygiant
035
Skyworth
526
Skyworth-RGB
Supreme
Sutron
SVA
Sydney
516
SongRi
518
Sonoko
511
003 075 106 138
152 156 167 231
248 255 271 282
288 355 356 357
362 392 395 397
398 410 415 420
Sony
449 479 490 492
511
Soundesign
006 007 011 012
035 084 329 502
Sowa
494 496 497 501
502
034
Version 6/2/2008
021
003 492
511
052 374 526
508
006 007 015 029
031 034 082 083
084 113 131 321
329 380 435 464
514 517
Songbai
Squareview
Supre-Macy
032 073 468 471
Teknika
497 500 527
044 080
Televideon
508
Tensai
511
Tera
055 493
Tevion
511
Texet
508
Thomas
479
Tiane
498 514
TMK
006 082 084 329
502
TNCi
028
Sylvania
468 471 472 487
493 527
Tobo
516 517 526
Symphonic
011 034 035 113
479
Tokyo
508
Synco
492 496 497 498
502 505
Tongguang
517
Syntax
275
SyntaxBrillian
254 275
Sytong
508
Tacico
497 502
Taishan
514 516
Tandy
Tashiko
013 017 033 042
099 102 103 104
109 110 112 118
120 123 127 135
146 155 158 170
176 206 297 302
020 032 498 509
497 508 509
351 378 387 391
409 413 417 428
004 047 325 383
494 496 501 509
Tatung
527
TCM
511
Tec
509 511
103
www.VIZIO.com
430 431 433 434
440 443 469 486
Toshiba
496 499 501 521
VIZIO SV420XVT1A User Manual
Setup Codes for TVs
Totevision
018
Transtec
508
Trutech
317
Tuntex
493 497
TVS
038
Ultravox
508
Vector
Research
029 082 083 493
Vexa
511
Victor
008 014 495 504
510
VIDEOLOGIC
508
Videologique
508
VideoTechnic
508 509
Vidikron
031 527
Vidtech
005 006 071 329
502
Setup Codes for TVs
White
Westinghous
e
Xiahua
Xiangyang
517
Xiangyu
516
Xihu
Xinaghai
Xingfu
021
Viore
326
Visiola
508
Vizio
Waltham
000 047 050 067
329 331 339
516 517
516
005 006 029 071
082 083 329 493
Yapshe
504
YingGe
516 518
Yoko
508 509 511
Yonggu
516
Youlanasi
514
Yousida
516
Yuhang
516
002 028 038 119
132 148 161 171
324 377
Viking
514 517
Yamaha
050 067 068 069
070 073 074 075
Viewsonic
038 084 094 508
514 516 517
192 245 289 301
329 363 367 372
Zenith
375 400 419 479
484 497 502
Zhuhai
516
509
001 002 005 006
012 015 029 031
071 082 083 084
329 493 502 519
Wards
527
Warumaia
506 513
Watt Radio
508
Waycon
033 501
Weipai
516
Westinghous
e
037 050 067 273
287 294 441
Version 6/2/2008
104
www.VIZIO.com