ConnectPRO SL-208 User guide

ConnectPRO
StreamLine Console
User Guide
For Models:
SL-01
SL-18
SL-208
SL-116
Table of Contents
n INTRODUCTION
l Overview…………………………………………………………………………………..1
n STREAMLINE CONSOLE
l Overview…………………………………………………………………………………..2
l Features………….………………………………………………………………………..2
l Packing List…………………………………………………………………………….….3
l Assembly…………………………………………………………………………………..4
l Installation…………………………………………………………………………………7
l Front Panel………………………………………………………………..………………8
l Specification……………………………………………………………………………….9
Please read this manual thoroughly and follow the Installation procedures to
prevent any damage to the StreamLine or any connecting device.
StreamLine Console
------------------------ Introduction
l Overview
The StreamLine offers the ultimate in styling and computer management. With a keyboard, mouse, TFT
LCD panel and an 8-port KVM switch housed in an industry standard 19" 1U-height rack drawer, it saves
you up to 1/3 of valuable real estate from a rack cabinet. Better yet, when the StreamLine Console is
cascaded with other StreamLine KVM switches to increase server management capacity, you save even
more!
StreamLine’s unique extension accessories can accommodate it with rack cabinet depth of only 20" (50 cm)
and up. Now, equip your rack cabinet with the StreamLine, throw away the bulky VGA monitor, keyboard
and mouse, and streamline your computer management.
Master-IT StreamLine Console
It saves you up to 1/3 of valuable rack cabinet spaces and
acts as a space-saving console with keyboard, mouse and
monitor. It can be connected to a computer directly or to
the console ports of a KVM switch.
StreamLine Console with One-Console
KVM Switch
This powerful combination allows you to access multiple
computers from one keyboard, mouse and monitor on the
integrated drawer. Operation is as simple as pressing
push button, entering hot-key command and navigating
through the user-friendly OSD (on-screen display) menu.
With an SL-18 connected, it switches up to 8 IBMcompatible computers.
StreamLine Console with Dual-Console
KVM Switch
The StreamLine, combined with an advanced multi-access
KVM Switch enables you to control multiple computers
from one out of two different locations, Local as the
StreamLine Console or Remote as another set of
keyboard, mouse and monitor.
SL-208 controls 8
computers
and
SL-216
controls
16
computers.
StreamLine Console
------------------------
StreamLine Console
l Overview
The StreamLine Console is a 19” 1U drawer designed for applications where space is at a premium, or CRT
displays are undesirable. It features a 15” flat panel TFT display, keyboard and a touch pad.
The drawer can be pulled out for operation from the rack on slides which latch in the extended position.
When not in use, the display can be folded down, locked and secured while pushed in.
With different Rear bracket & extension kit, the StreamLine Console can be mounted on rack cabinet of
various depths.
The console comes with standard PS/2 keyboard connector, PS/2 mouse connector and HDB15 VGA
connector for computer or KVM switch connection.
l Features
n Modularized design
n Optional Master-IT PRO KVM switches available
n Flip-open 15" TFT LCD panel included with resolution 1024x768
n For rack cabinet with depth from 20"(50cm) and up (with appropriate Rear bracket & extension kit)
n Standard 19" 1U rack drawer
n Ergonomic hand rest design
n Locking mechanism locks the drawer when pulled out, pushed in, or folded down
n Full 105 key, low-profile, sturdy keyboard included
n Standard connectors for PC connection
n Quick and easy installation
StreamLine Console
l Packing List
These are required to install the StreamLine Console:
n StreamLine Console: assembled "LCD panel
keyboard + mouse pad" drawer
+
n Rear bracket & extension kit: This kit contains two pieces of rear brackets and two pieces of aluminum
blocks. Make sure you have the correct kit to fit the depth of your cabinet. Note: the following length is
measured between "front pole and rear pole inside a rack cabinet" not the outside depth of a rack cabinet
enclosure.
Front Pole to rear pole distance
RES-1
RES-2
RES-3
RES-4
cm
inch
cm
inch
cm
inch
cm
inch
Minimum
49.5
1
19 /2
57.5
5
22 /8
67.5
5
26 /8
77.5
30 /2
Maximum
57
22 /8
3
70.5
27 /4
3
80.5
31 /8
5
90.5
35 /8
1
5
n KVM Switch: KVM module box can be connected to a StreamLine Console or be used as a stand-alone
KVM switch.
Module type
No. of console port
No. of computer port
KVM switch inside
n Bolt-and-nut set
n User's manual
SK-01
SK-18
SK-28
SK-216
1
1
No
1
8
Yes
2
8
Yes
2
16
Yes
StreamLine Console
l Assembly
1.
Choose a proper position for the rack drawer. Mount
the rear brackets (from the Rear bracket & extension
kit), and lightly fasten them onto the rear vertical poles.
Both will be removed later.
2.
Remove the stopper from the assembled drawer. The stopper is designed to refrain the drawer from
sliding out during transportation.
3.
Slide the assembled drawer to the rack cabinet from
the front and insert the two slide rails of the
assembled drawer into the pockets of the rear
brackets.
4.
Fasten the assembled drawer onto the front brackets
by four screws.
StreamLine Console
5.
Remove the rear brackets. Now, the front brackets hold the assembled drawer.
6.
Attach the aluminum extensions (from the Rear bracket & extension kit) to both sides of the KVM
module box. Please note the length of the aluminum extensions and mount them in one of the following
ways.
Short aluminum extensions attachment
7.
Long aluminum extensions attachment
Slide the rear brackets onto the aluminum extensions. And, then insert both slide rails of the assembled
drawer into the tight space formed by the combination of the rear brackets and the aluminum extensions.
The KVM module should be pushed in evenly on both right and left sides.
StreamLine Console
8.
Push the rear brackets all the way in and fasten them.
9.
Slide the assembled drawer out. Push the KVM
module box evenly toward the drawer, and then lock
both units by the screws.
10. Make sure the C-36 connectors are firmly mated during step 10.
11. Connect the power supply to the power jack on the KVM module to complete the installation.
StreamLine Console
l Installation
Consider the StreamLine Console as a set of keyboard, mouse and monitor, and connect it directly to a
computer.
StreamLine Console connects to a computer
Or, the StreamLine Console can be connected to a Master-IT PRO KVM switch as shown below.
StreamLine Console connects to a Master-IT PRO KVM switch
StreamLine Console
l Front Panel
n KVM Control and Status: (This section is effective only when a KVM switch module is connected.)
1.
2.
3.
4.
Computer Selection Pad
Press one of these pushbuttons to select a computer.
Selected Computer Indicator
One of the indicators turns red when pushbuttons, hotkey or OSD menu selects a
corresponding computer.
Local Console in operation
It turns green when a computer is accessed through the StreamLine Console.
Remote Console in operation
It turns green when a computer is accessed by another set of keyboard/mouse/monitor
connected to the "Remote" console when the KVM switch is either SL-208 or SL-216.
n LCD Panel Control
5.
6.
LCD Panel Menu
These buttons invoke the OSD menu for the LCD panel and acts as menu selection.
LCD Panel Adjustment
Lets you adjust settings for the LCD panel.
n Keyboard Status & LCD Panel Power Switch
Num Lock
Keyboard Num Lock status.
8. Caps Lock
Keyboard Caps Lock status.
9. Scroll Lock
Keyboard Scroll Lock status.
10. LCD Panel Power Switch
7.
StreamLine Console
l LCD Panel Specification
LCD size
Active Display Area
Pixel Pitch (mm)
Resolution
Brightness
Contrast Ratio
Display Color
User Control
Input Signal
Plug-n-Play VESA
Power Management
Viewing Angle
Keyboard
Mouse Touch Pad
15.1” TFT
304.1 x 228.1 (mm)
0.297 (H) x 0.297 (V)
1024 x 768 @60/70/75Hz
200 cd/M^2
400
16.7M (8 bits)
OSD Control (auto saving)
RGB analog, H/V separate
VESA DDC 1/2B
VESA DPMS compliant
“on” mode: 23.2W
“stand-by” mode <= 1W
“suspend” mode <= 1W
“off” mode <= 1W
(left/right) +80 ~ -80
(up/down) +80 ~ -80
105 Key, PS/2
PS/2
StreamLine Console
Limited Warranty
IN NO EVENT SHALL THE ConnectPRO’s LIABILITY FOR DIRECT OR
INDIRECT, SPECIAL, INCIDENTIAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFIT, LOSS OF BUSINESS, OR FINANCIAL LOSS WHICH MAY BE CAUSED
BY THE USE OF THE PRODUCT EXCEEDS THE PRICE PAID FOR THE
PRODUCT.
ConnectPRO makes no warranty or representation, expressed or implied with
respect to the contents or use of this documentation, and especially disclaims its
quality, performance, merchantability, or fitness for any particular purpose.
ConnectPRO also reserves the right to revise or update the product or
documentation without obligation to notify any user of such revisions or updates.
For further information, please contact your direct vendor.
All the brand names and registered trademarks are the property of their respective
owners.
StreamLine Console
20525 Paseo Del Prado
Walnut, CA 91789
(909) 444-9288
www.connectpro.com
info@connectpro.com