MODEL
SB4021M-A1
VIZIO
QUICK
START
GUIDE
IMPORTANT SAFETY INSTRUCTIONS
Your Unit is designed and manufactured to operate within defined design limits, and
misuse may result in electric shock or fire. To prevent your Unit from being damaged, the
following rules should be observed for its installation, use, and maintenance. Please read
the following safety instructions before operating your Unit. Keep these instructions in a
safe place for future reference.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
Never spill liquids on your Unit.
• The power cord must be replaced when using different voltage than the voltage specified. For
more information, contact your dealer.
• When connected to a power outlet, power is always flowing into your Unit. To totally
disconnect power, unplug the power cord.
• The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of un-isolated, dangerous voltage
within your Unit that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
• Clean only with a dry cloth.
• The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and servicing instructions in the
literature accompanying your Unit.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
• Do not overload power strips and extension cords. Overloading can result in fire or electric
shock.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
• The wall socket should be located near your Unit and be easily accessible
• Do not use this apparatus near water.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water
penetrates into your Unit, unplug the power cord and contact your dealer. Continuous use in
this case may result in fire or electric shock.
• Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent,
unplug the power cord and contact your dealer immediately. Do not try to repair your Unit
yourself.
• Avoid using dropped or damaged appliances. If your Unit is dropped and the housing is
damaged, the internal components may function abnormally. Unplug the power cord
immediately and contact your dealer for repair. Continued use of your Unit may cause fire or
electric shock.
• Do not install your Unit in an area with heavy dust or high humidity. Operating your Unit in
environments with heavy dust or high humidity may cause fire or electric shock.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as when the power supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
• Ensure that the power cord and any other cables are unplugged before moving your Unit.
• To reduce the risk of electric shock or component damage, switch off the power before
connecting other components to your Unit.
• To reduce risk of electric shock, do not touch the connector with wet hands.
• Unplug the power cord before cleaning your Unit. A damp cloth is sufficient for cleaning. Do
not use a liquid or a spray cleaner on your Unit. Do not use abrasive cleaners.
• Always use the accessories recommended by the manufacturer to insure compatibility.
• When moving your Unit from an area of low temperature to an area of high temperature,
condensation may form in the housing. Wait before turning on your Unit to avoid causing fire,
electric shock, or component damage.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To
ensure reliable operation of your Unit and to protect it from overheating, be sure these openings
are not blocked or covered. Do not place your Unit in a bookcase or cabinet unless proper
ventilation is provided.
• Never push any object into the slots and openings on your Unit enclosure. Do not place any
objects on the top of your Unit. Doing so could short circuit parts causing a fire or electric shock.
• When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord may
damage the wires inside the cord and cause fire or electric shock. When your Unit will not be
used for an extended period of time, unplug the power cord.
• Insert the remote control battery in accordance with instructions. Incorrect polarity may
cause the battery to leak which can damage the remote control or injure the operator.
• See the important note and rating located on the bottom of the unit.
• WARNING - This equipment is not waterproof. To prevent a fire or shock hazard, do not place
any container filled with liquid near the equipment (such as a vase or flower pot) or expose it
to dripping, splashing, rain, or moisture.
• CAUTION - Danger of explosion or fire if battery is mistreated. Replace only with the same
or specified type.
• Do not leave the battery exposed to direct sunlight for a long period of time with doors and
windows closed. Do not disassemble the battery or dispose of it in fire.
• Disconnect the mains plug to shut off when you experience trouble or the device is not in use.
The mains plug shall remain readily operable.
PACKAGE CONTENTS
Home Theater Sound Bar
Remote Control
with Battery
Wireless Subwoofer
Power Adapter
for Sound Bar
3.5mm to RCA
Stereo Audio Cable
Wall Mount
Brackets (2)
Wall Mount Template
Quick Start Guide
1
CONTROLS & CONNECTIONS
Info Display
Displays volume, input,
and other information.
Power
Press to turn
on or off.
Input
Press to change
input source.
Volume Up/Down
Press to increase
or decrease overall
volume.
Power Light
When Sound Bar is
on, this light is on.
Link LED Light
Link Button
Used to re-link the
Subwoofer with the Sound
Bar.
Power Switch
Press to turn on or off.
Power Cord
2
Digital Optical In
Digital Coaxial In
1.85
Analog 3.5mm In
Wall Mount Posts
USB
1.85
USB
1.85
USB
1.85
Power Port
USB Port
3
FIRST-TIME SETUP
1
1.85
BETTER
BETTER
GOOD
DIGITAL OPTICAL
CABLE*
DIGITAL COAXIAL
CABLE*
GOOD
3.5MM
CABLE*
3.5MM TO RCA
CABLE
CHOOSE ONE CABLE:
GOOD
BETTER
AND CONNECT IT TO YOUR TV
*Not Included
4
USB
Connect the Sound Bar to your TV using
one of the connection types to the left.
Choose the best possible connection
type.
Be sure the TV port is an audio output,
not an audio input.
5
2
3
1.85
USB
1.85
4
Plug in
Sound Bar
6
5
Plug in
Subwoofer
6
Sound Bar is centered
below the TV, close to ear
level.
Wireless Subwoofer is in the front
corner of the room, up to 60 feet
away from the Sound Bar. Bass is
projected outward.
For the best surround sound experience, position the speakers as shown.
7
7
Flip the ON/OFF
Switch to ON.
8
8
Power
Turn your TV on, then press the
Power button on the remote to turn
the Sound Bar on.
Press the Input button on the remote
until your connection type is displayed.
Push repeatedly to cycle through
input sources (Analog In, Coaxial In,
Optical In, and USB).
Input
9
Setup is complete.
If there is no sound coming from the Sound Bar or Subwoofer, or if you experience other
issues, turn to page 18 for help and troubleshooting tips.
9
USING THE REMOTE
Power
Press to turn on or off.
Volume Up
Press to increase overall
system volume.
Play/Pause
Press to play or pause track.
Rewind/Previous
Press and hold to rewind.
Press to go to last track.
Fast Forward/Next
Press and hold to fast forward.
Press to advance to next track.
Volume Down
Press to decrease overall
system volume.
Mute
Press to turn the sound on or off.
Input
Press to output audio from the
selected device port. Press
repeatedly to cycle through
available inputs.
10
Menu
Press to display menu options.
SRS TruVolume
SRS TruSurround HD
When on, SRS TruVolume intelligently normalizes volume
fluctuations due to television commercials or channel
changes.
When on, SRS TruSurround HD delivers enveloping,
immersive surround sound, making every seat in the room
the “sweet spot”.
EXTENDED FUNCTIONS USING BUTTON COMBINATIONS
Mute/Unmute = Volume Up + Volume Down
Press and hold both buttons for 1 second to mute/
unmute your Sound Bar.
+
+
Factory Reset = Power + Volume Up + Volume Down
Press and hold all 3 buttons for 10 seconds to return
+
your Sound Bar to its factory
default settings.
+
THE SOUND BAR INFO DISPLAY
Volume - Increase or decrease volume
Volume
SRS TruVolume - Toggle SRS TruVolume on or off
15
Bass Level - Increase or decrease bass level
Bass
9
Treble Level - Increase or decrease treble level
Treble
9
TruVol
ON
SRS TruSurround - Toggle SRS TruSurround on or off
TSHD
ON
Brightness Level - Increase or decrease brightness level
Bright
10
To conserve energy, after displaying a message for several seconds, the Info Display automatically shuts off.
11
WALL MOUNTING THE SOUND BAR
1
OUND
LEAVE
BARTHIS
ANDSPACE
YOURBETWE
TV
Use a phillips-head screwdriver to remove the screws from the Sound Bar stands.
Reinsert the screws for safekeeping. Save the stands for future use.
2
MARK HERE
TEMPLATE
NE
12
MARK HERE
WALL MO
Place the included wall mounting template against the wall under your TV.
Mark the locations of the 4 bracket holes using a pencil.
3
The screws and anchors depicted are not included.
The appropriate screws and anchors will depend on
the material of your wall. Be sure that the screws
and/or anchors you use are securely fastened and
can support the weight of the Sound Bar.
Recommended screw diameter: 4mm
Recommended screw length: 8mm or greater
Attach the brackets to the wall as shown. Gently hang the Sound Bar on the brackets using the
wall mount posts on the back of the Bar.
4
USB
1.85
1.85
Use the cable management hooks to route your audio cables to your TV.
13
RE-LINKING THE SUBWOOFER AND SOUND BAR
1
You may need to re-link the Subwoofer to the Sound Bar if there
is no sound coming from the Subwoofer and the orange light on
the rear of the Subwoofer is either blinking or not lit.
2
Press and hold the INPUT button on the top of
the Sound Bar for 5 seconds. The Sound Bar
will display Pairing.
14
3
Press and hold the LINK button on the back of the
Subwoofer until the Sound Bar displays Paired.
REPLACING THE REMOTE BATTERY
1
2
Insert a flat-head screwdriver into the slot as
shown. Gently push down on the tab, then press
and pull downward on the battery cover to open.
When replacing an old battery with a new
CR2032, be sure that the + sign on the
battery is facing up. Push the battery cover
until it clicks back into place.
PROGRAMMING YOUR UNIVERSAL REMOTE
Many universal remote controls can be programmed to
control your Sound Bar.
As each universal remote works differently, you should
refer to your remote’s user manual for instructions on
programming.
15
ADVANCED SETUP
Connect up to four different devices to the Sound Bar
(devices shown are examples–you can use any device).
To listen to a device, change the input source on the Sound Bar.
USB
1.85
Optical,
Coaxial,
and
3.5mm cables transmit
audio only. If connecting a
video device, you will need a
separate video connection
from the device to your TV.
16
DIGITAL OPTICAL
CABLE*
DIGITAL COAXIAL
CABLE*
Game Console
Network Media Player
3.5MM
CABLE
USB
THUMB DRIVE™
Tablet/MP3 Player/Laptop
VIZIO RECOMMENDS
ONE POWERFUL
MOVIE MACHINE
3D BLU-RAY™ PLAYER
WITH WIRELESS INTERNET APPS
The VIZIO 3D Blu-ray™ Player with Wireless Internet Apps delivers breathtaking 3D and 1080p Full HD video performance with up to 7.1
channels of crystal-clear digital surround sound. It’s stylishly slim with an easy slot-load design so there’s no waiting for a tray to eject. Builtin Wi-Fi delivers easy wireless access to on-demand movies, TV shows, music, and more. It’s all at the push of a button on the enhanced
2-sided remote with full keyboard.*
Sold separately. Available at www.VIZIO.com
*Not Included
17
TECHNICAL SUPPORT
There is no power.
There is no sound from
the Sound Bar.
There is no sound
coming from the
Subwoofer.
I hear buzzing or
humming.
How do I listen to
SRS TruSurround or
Dolby Digital?
I would like to adjust the
sound on the Subwoofer
and Sound Bar.
I want to return my
Sound Bar to factory
settings.
18
• Press the POWER button on the remote control or on the top of your Sound Bar.
• Ensure the power cords are securely connected.
• Turn the Subwoofer power switch to ON.
• Plug a different device into the electrical outlet to verify that the outlet is working correctly.
• To conserve power, the Sound Bar shuts off automatically after 30 minutes if not in use.
• Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar.
• Press MUTE on the remote to ensure the Sound Bar is not muted.
• Select a different input source (Analog, Coaxial, or Optical).
• Be sure the audio cable coming from the TV is connected to an audio output, not an audio input.
• If listening to a USB source, be sure the files are in MP3 format.
• If the lights on the Subwoofer are in a slow blink pattern, you will need to pair the Subwoofer
with the Sound Bar. See Re-Linking the Subwoofer and Sound Bar on page 14.
• Move the Subwoofer closer to the Sound Bar.
• Turn the Subwoofer power switch to ON.
• To conserve power, the Subwoofer will automatically enter a low power state when not in use. It may take up to 10
seconds for the Subwoofer to link after the Sound Bar is turned on.
• Ensure all cables and wires are securely connected.
• Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not, the problem may
be with the original device.
• Connect your device to a different input on the Sound Bar.
• To activate SRS TSHD, press the Menu button on the remote and use the arrow keys to scroll to the TSHD screen to
toggle between on and off.
• To listen to Dolby Digital, your device must be playing content in Dolby Digital format. Dolby Digital is only
available over Digital Coaxial or Digital Optical.
• Adjust the bass and treble levels using the remote.
• Try enabling/disabling SRS TruSurround.
• Press and hold the Power, Volume Up, and Volume Down buttons for 10 seconds to return your Sound Bar to its factory
default settings.
DO YOU HAVE QUESTIONS?
LET US HELP!
YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT
The VIZIO support team is highly trained
and is based in the United States.
We can help with:
•
New Product Setup
•
Connecting Your Devices
•
Technical Problems
•
And More
Phone: (877) 878-4946 (TOLL-FREE)
Email: techsupport@VIZIO.com
Web: www.VIZIO.com/support
Hours of operation: Monday - Friday: 5 AM TO 9 PM (PST)
Saturday - Sunday: 8 AM TO 4 PM (PST)
We speak English • Se habla Español • Nous parlons Français
19
ONE-YEAR LIMITED WARRANTY
ON PARTS AND LABOR
Covers units purchased as new in United States and Puerto Rico Only
VIZIO provides a warranty to the original purchaser of a new Product against defects
in materials and workmanship for a period of one year of non-commercial usage
and ninety (90) days of commercial use. If a Product covered by this warranty is
determined to be defective within the warranty period, VIZIO will either repair or
replace the Product at its sole option and discretion.
To obtain warranty service, contact VIZIO Technical Support via email: TechSupport@
VIZIO.com or via phone at 877 MY VIZIO (877.698.4946) from 6:00AM to 9:00PM
Monday through Friday and 8:00AM to 4:00PM Saturday and Sunday, Pacific
Time, or visit www.VIZIO.com. PRE-AUTHORIZATION MUST BE OBTAINED BEFORE
SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER. Proof of purchase in the form
of a purchase receipt or copy thereof is required to show that a Product is within the
warranty period.
Parts and Labor
There will be no charge for parts or labor during the warranty period. Replacement
parts and Products may be new or recertified at VIZIO’s option and sole discretion.
Replacement parts and Products are warranted for the remaining portion of the
original warranty or for ninety (90) days from warranty service or replacement,
whichever is greater.
Type of Service
Defective Products must be sent to a VIZIO service center to obtain warranty service.
VIZIO is not responsible for transportation costs to the service center, but VIZIO will
cover return shipping to the customer. PRE-AUTHORIZATION IS REQUIRED BEFORE
SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE.
Product returns to VIZIO’s service centers must utilize either the original carton box
and shipping material or packaging that affords an equal degree of protection. VIZIO
SPECIFICATIONS
Sound Bar:
Subwoofer:
Frequency Response
(Sound Bar):
Frequency Response
(Subwoofer):
Subwoofer Wireless Range:
Sound Pressure Level (SPL):
Voltage (Sound Bar):
Voltage (Subwoofer):
Dimensions (Sound Bar):
Dimensions (Subwoofer):
Net Weight (Sound Bar):
Net Weight (Subwoofer):
Gross Weight:
Compliances:
20
Two 3” High-Fidelity Drivers
One 6.5” Long Throw (High Excursion) Driver
Technical Support will provide instructions for packing and shipping the covered
Product to the VIZIO service center.
Limitations and Exclusions
VIZIO’s one-year limited warranty only covers defects in materials and workmanship.
This warranty does not cover, for example: cosmetic damage, normal wear and
tear, improper operation, improper voltage supply or power surges, signal issues,
damages from shipping, acts of God, any type of customer misuse, modifications or
adjustments, as well as installation and set-up issues or any repairs attempted by
anyone other than by a VIZIO authorized service center. Products with unreadable
or removed serial numbers, or requiring routine maintenance are not covered.
This one year limited warranty does not cover Products sold “AS IS”, “FACTORY
RECERTIFIED”, or by a non-authorized reseller.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED
ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN
DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR
ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER
INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS,
WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT
EXCEED THE PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE
FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST
REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES
YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE.
CHECK www.VIZIO.com FOR THE MOST CURRENT VERSION.
and
are trademarks of SRS Labs, Inc.
TruSurround HD and TruVolume technologies are incorporated under
license from SRS Labs, Inc.
150 Hz - 18 kHz (+/-5dB)
40 Hz - 150 Hz (+/-5dB)
> 60’ with Clear Line of Sight
89 dB 1w-1m
100-240 V, 50-60 Hz
120V, 60 Hz
40.1” x 4.1” x 2.1” (with Stand)
40.1” x 3.3” x 2.1” (without Stand)
8.5” x 12.8” x 11.0”
3.53 lbs (1.6 kg)
11.0 lbs (5.0 kg)
23.2 lbs (10.5 kg)
FCC, NOM, cULus
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
This product qualifies for ENERGY STAR in the “factory default”
setting and this is the setting in which power savings will be
achieved. Changing the factory default settings or enabling other
features will increase power consumption that could exceed the
limits necessary to qualify for ENERGY STAR rating.
LEGAL & COMPLIANCE
FCC Class B Radio Interference Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
unauthorized modification to this equipment. It is the responsibilities of the user to
correct such interference.
RF Exposure Information
This device meets the government’s requirements for exposure to radio waves. This
device is designed and manufactured not to exceed the emission limits for exposure
to radio frequency (RF) energy set by the Federal Communications Commission of the
U.S. Government. This device complies with FCC radiation exposure limits set forth for
an uncontrolled environment.
IC Statement
Operation is subject to the following two conditions:
1.Reorient or relocate the receiving antenna.
2.Increase the separation between the equipment and receiver.
3.Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
4.Consult the dealer or an experienced radio/TV technician for help.
1.This device may not cause interference, and
2.This device must accept any interference, including interference that may cause
undesired operation of the device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Notice:
1.The changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
2.Shielded interface cables and AC power cord, if any, must be used in order to
comply with the emission limits.
3.The manufacturer is not responsible for any radio or TV interference caused by
Disposal and Recycling
You must dispose of this product properly, according to local laws and regulations.
Because this product contains electronic components and a battery, it must be
disposed of separately from household waste. Contact local authorities to learn
about disposal and recycling options.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
INFORMATION ON HEARING DAMAGE
Understanding Noise Induced Hearing Loss
Exposure to loud sounds can damage your hearing, causing hearing loss and tinnitus
(ringing or buzzing in the ears). While a variety of things can lead to hearing loss,
including aging and side effects of certain medications, the most common cause of
non-age-related hearing damage is loud noise. Extremely loud sounds, such as gun
shots or firecrackers at close range, can cause immediate hearing damage. Hearing
damage can also occur over time due to repeated exposure to loud sounds such as
industrial noise or loud music. With continued exposure to loud noises, ears may
become accustomed to the sound level, which may result in permanent damage to
hearing without any noticeable discomfort.
Temporary and Permanent Hearing Loss
Noise induced hearing loss and tinnitus may be temporary or permanent. Ears
typically recover from temporary hearing damage in a short time. However, ears may
not recover completely, and some damage may be permanent. Repeated exposure
to loud sound can cause more and more damage, and eventually lead to serious
hearing problems. Scientists generally agree that, over time, exposure to harmful
levels of noise can lead to permanent noise induced hearing loss by damaging and/
or destroying the inner ear’s sensory hair cells.
Loud Sounds + Time = Hearing Loss
The more time you spend exposed to loud sounds, the more likely you are to damage
your hearing. All of the loud sounds that you are exposed to during a day add up continued exposure to loud sounds can prevent your ears from recovering and also
cause additional damage.
Symptoms of Hearing Loss
While not all noise induced hearing loss is noticeable, symptoms may include
a sensation of pressure or fullness in your ears, ringing in your ears, or muffled
speech. If you experience these symptoms or believe you may have experienced
noise induced hearing loss, you should have your hearing checked by an ear doctor
or audiologist.
CARE & MAINTENANCE
Do not use volatile solvents (such as toluene, rosin, or alcohol) to clean this product.
Such chemicals may damage it. Do not spray cleaners directly on the product. To
clean this product, gently wipe it with a clean, dry, soft cloth.
21
© 2012 VIZIO INC. ALL RIGHTS RESERVED.
120629OC-NC