ineo 3300P - Konica Minolta

Quick Reference
ineo 3300P
Quick Reference
Contents
1—Learning about the printer ....................................................................................................................... 3
Using the printer control panel .................................................................................................................. 3
Understanding the printer control panel light sequences ......................................................................... 4
2—Loading paper and specialty media ......................................................................................................... 9
Setting the paper size and type ................................................................................................................ 9
Configuring Universal paper settings ........................................................................................................ 9
Using the standard bin and paper stop ................................................................................................... 10
Loading trays .......................................................................................................................................... 11
Loading the multipurpose feeder ............................................................................................................ 15
Linking and unlinking trays ..................................................................................................................... 19
Linking and unlinking trays ................................................................................................................. 19
Configuring a custom paper type name ............................................................................................. 20
Configuring a custom paper type ....................................................................................................... 20
Assigning a custom paper type .......................................................................................................... 21
3—Printing................................................................................................................................................... 22
Printing documents ................................................................................................................................. 22
Printing a document............................................................................................................................ 22
Adjusting toner darkness .................................................................................................................... 23
Canceling a print job ............................................................................................................................... 24
Canceling a print job from the computer ............................................................................................ 24
4—Clearing jams ......................................................................................................................................... 25
Accessing jam areas ............................................................................................................................... 25
[x]-page jam, open front door. [20y.xx] ................................................................................................... 26
[x]-page jam, open rear door. [20y.xx] .................................................................................................... 29
[x]-page jam, clear standard bin. [20y.xx] ............................................................................................... 32
[x]-page jam, remove tray 1 to clear duplex. [23y.xx] ............................................................................. 33
[x]-page jam, remove tray [x]. [24y.xx] .................................................................................................... 36
[x]-page jam, clear manual feeder. [250.xx] ........................................................................................... 39
-2-
Quick Reference
1—Learning about the printer
Note: For network printers or printers connected to a print server, you can also check the status of your
printer through the Embedded Web Server.
Using the printer control panel
Light or button
Color
Description
1
Error light
Yellow
An error has occurred.
2
Paper jam light
Yellow
A paper jam has
occurred.
3
Load or remove paper light
Yellow
Paper must be loaded
in the tray or removed
from the bin.
4
Toner low or replace imaging
unit light
Yellow
The toner cartridge is
low on toner, or the
imaging unit needs to
be replaced.
5
Ready or data light
Green
The printer is in Ready
state.
-3-
Quick Reference
Light or button
Color
Description
6
Sleep button and light
Amber
Use this to enable
Sleep mode or
Hibernate mode.
7
Start button and light
Green
Use this to initiate a
print job.
8
Stop or cancel button
Red
Use this to cancel a
print job.
Understanding the printer control panel light sequences
The printer control panel lights can mean different things, depending on the light sequence. The lights can
be on, off, blinking, or blinking slowly, indicating a printer status, a warning, or an error. The following
table shows the appearances of the lights.
On
Blinking
Blinking slowly
If the printer control panel light sequence matches a light sequence in the following table, then see the
message in the same row.
-4-
Quick Reference
Light sequence
Message
Close front door
Replace imaging unit
Replace unsupported
toner cartridge
Replace unsupported
imaging unit
Toner cartridge, imaging
unit mismatch
Canceling print job
Flushing buffer
Resolution reduced
Non-Printer Manufacturer
toner cartridge
Non-Printer Manufacturer
imaging unit
Printer had to restart
Toner cartridge very low
Imaging unit very low
Toner cartridge nearly low
Imaging unit nearly low
Service error
-5-
Quick Reference
Light sequence
Message
Load paper
Remove paper from
standard bin
Change paper
Toner cartridge low
Imaging unit low
Ready
Waiting
Busy
Not ready
If the printer control panel light sequence matches a light sequence in the “Primary light sequence”
twice quickly on the printer control panel. Search for a
column of the following table, then press
matching light sequence in the “Supplemental light sequence” column, and then see the message in the
same row.
Primary light sequence
Supplemental light sequence
Message
Missing or
unresponsive toner
cartridge
Replace toner cartridge
Toner cartridge, printer
region mismatch
-6-
Quick Reference
Primary light sequence
Supplemental light sequence
Message
Missing or
unresponsive imaging
unit
Standard network
software error
Network [x] software
error
Insufficient memory to
collate job
Complex page
Insufficient memory to
support Resource Save
feature
Standard parallel port
disabled
Standard USB port
disabled
Too many trays
attached
Incorrect paper size
Memory full
Paper jam, clear
standard bin
Paper jam, remove
standard tray to clear
duplex
Paper jam, open rear
door
-7-
Quick Reference
Primary light sequence
Supplemental light sequence
Message
Paper jam, remove
standard tray to clear
duplex
Paper jam, remove
standard tray to clear
duplex
Paper jam, open front
door
Paper jam, remove
standard tray
Paper jam, remove
optional tray
Paper jam, manual
feeder
-8-
Quick Reference
2—Loading paper and specialty media
Setting the paper size and type
Using the Embedded Web Server
1. Open a Web browser, and then type the printer IP address in the address field.
Notes:
-
Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP
section. The IP address appears as four sets of numbers separated by periods, such as
123.123.123.123.
-
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2. Click Settings >Paper Menu.
Using the printer settings on the computer
Depending on your operating system, access the Paper menu using the Local Printer Settings Utility or
Printer Settings.
Note: The paper size and type settings will be saved until you reset factory default settings.
Configuring Universal paper settings
The Universal paper size is a user-defined setting that lets you print on paper sizes that are not preset in
the printer menus.
Notes:
•
The smallest Universal size supported in the multipurpose feeder is 76.2 x 127 mm (3 x 5 inches).
•
The largest supported Universal size is 215.9 x 355.6 mm (8.5 x 14 inches).
Using the Embedded Web Server
1. Open a Web browser, and then type the printer IP address in the address field.
2. Click Settings >Paper Menu >Universal Setup.
3. Select the unit of measure, or click Print Width or Print Length.
4. Change the setting, and then click Submit.
Using the printer settings on the computer
1. Depending on your operating system, access the Paper menu using the Local Printer Settings Utility
or Printer Settings.
2. Select the tray containing the Universal paper size, and then select Universal as the paper size.
-9-
Quick Reference
Using the standard bin and paper stop
The standard bin holds up to 150 sheets of 20-lb paper. It collects prints facedown. The standard bin
includes a paper stop that keeps paper from sliding out the front of the bin as it stacks.
To open the paper stop, pull it so that it flips forward.
Note: Close the paper stop when moving the printer to another location.
- 10 -
Quick Reference
Loading trays
CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray
separately. Keep all other trays closed until needed.
1. Pull out the tray completely.
Note: Do not remove trays while a job prints or while the following light sequence appears on the
printer control panel. Doing so may cause a jam.
Busy
- Blinking
- 11 -
Quick Reference
2. Squeeze, and then slide the width guide tab to the correct position for the size of the paper you are
loading.
- 12 -
Quick Reference
3. Unlock the length guide. Squeeze, and then slide the length guide tab to the correct position for the
size of the paper you are loading.
Notes:
-
For some paper sizes like letter, legal, and A4, squeeze and slide the length guide tab backward
to accommodate their length.
-
When loading legal-size paper, the length guide extends beyond the base leaving the paper
exposed to dust. To protect the paper from dust, you can purchase a dust cover separately.
-
If you are loading A6-size paper in the standard tray, then squeeze and slide the length guide tab
toward the center of the tray to the A6-size position.
-
Make sure the width and length guides are aligned with the paper size indicators on the bottom of
the tray.
- 13 -
Quick Reference
4. Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper.
Straighten the edges on a level surface.
5. Load the paper stack.
Note: Make sure the paper is below the maximum fill indicator located on the side of the width guide.
Notes:
-
Load with the printable side facedown when using recycled or preprinted paper.
-
Load prepunched paper with the holes on the top edge toward the front of the tray.
-
Load letterhead facedown, with the top edge of the sheet toward the front of the tray. For twosided printing, load letterhead faceup with the bottom edge of the sheet toward the front of the
tray.
- 14 -
Quick Reference
6. Insert the tray.
7. From the Embedded Web Server or your computer, set the paper size and type in the Paper menu to
match the paper loaded in the tray.
Notes:
-
If the printer is not connected to a network, then access the Paper menu using Local Printer
Settings Utility or Printer Settings, depending on your operating system.
-
Set the correct paper size and type to avoid paper jams and print quality problems.
Loading the multipurpose feeder
Use the multipurpose feeder when printing on different paper sizes and types or specialty media, such as
card stock, transparencies, paper labels, and envelopes. You can also use it for single-page print jobs on
letterhead.
1. Open the multipurpose feeder.
- 15 -
Quick Reference
a. Pull the multipurpose feeder extender.
b. Pull the extender gently so the multipurpose feeder is fully extended and open.
2. Squeeze the tab on the left width guide, and then move the guides for the paper you are loading.
- 16 -
Quick Reference
3. Prepare the paper or specialty media for loading.
-
Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the
paper. Straighten the edges on a level surface.
-
Hold transparencies by the edges. Flex the stack of transparencies back and forth to loosen them,
and then fan them. Straighten the edges on a level surface.
Note: Avoid touching the printable side of the transparencies. Be careful not to scratch them.
-
Flex the stack of envelopes back and forth to loosen them, and then fan them. Straighten the
edges on a level surface.
4. Load the paper or specialty media.
Notes:
-
Do not force paper into the multipurpose feeder. Overfilling may cause paper jams.
-
Make sure the paper or specialty media is below the maximum paper fill indicator located on the
paper guides.
- 17 -
Quick Reference
-
Load paper, transparencies, and card stock with the recommended printable side faceup and the
top edge entering the printer first. For more information on loading transparencies, see the
packaging the transparencies came in.
-
Load letterhead faceup with the top edge entering the printer first. For two-sided (duplex) printing,
load letterhead facedown with the bottom edge of the sheet entering the printer first.
-
Load envelopes with the flap on the left side facedown.
Warning—Potential Damage: Never use envelopes with stamps, clasps, snaps, windows,
coated linings, or self-stick adhesives. These envelopes may severely damage the printer.
- 18 -
Quick Reference
5. From the Embedded Web Server or from your computer, set the paper size and type in the Paper
menu to match the paper loaded in the multipurpose feeder.
Note: Depending on your operating system, access the Paper menu using Local Printer Settings
Utility or Printer Settings.
Linking and unlinking trays
When the paper size and paper type for any trays are the same, the printer will link those trays. When
one linked tray becomes empty, paper will feed from the next linked tray. It is recommended to give all
unique paper, such as letterhead and different colored plain papers, a different custom type name so that
the trays they are in will not automatically link.
Linking and unlinking trays
Using the Embedded Web Server
1. Open a Web browser, and then type the printer IP address in the address field.
Notes:
-
Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP
section. The IP address appears as four sets of numbers separated by periods, such as
123.123.123.123.
-
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2. Click Settings >Paper Menu.
3. From the Tray Configuration section, select a tray, and then change the paper size and type settings.
-
To link trays, make sure the paper size and type for the tray match that of the other tray.
-
To unlink trays, make sure the paper size or type for the tray does not match that of the other tray.
4. Click Submit.
Using the printer settings on the computer
Depending on your operating system, access the Paper menu using the Local Printer Settings Utility or
Printer Settings.
- 19 -
Quick Reference
Warning—Potential Damage: Paper loaded in the tray should match the paper type assigned in the
printer. The temperature of the fuser varies according to the specified paper type. Printing issues may
occur if settings are not properly configured.
Configuring a custom paper type name
Using the Embedded Web Server
1. Open a Web browser, and then type the printer IP address in the address field.
Notes:
-
Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP
section. The IP address appears as four sets of numbers separated by periods, such as
123.123.123.123.
-
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2. Click Settings >Paper Menu >Custom Names.
3. Select a custom name, and then type a new custom paper type name.
4. Click Submit.
5. Click Custom Types, and then verify if the new custom paper type name has replaced the custom
name.
Using the printer settings on the computer (Windows only)
Access the Custom menu using the Local Printer Settings Utility.
Configuring a custom paper type
Using the Embedded Web Server
1. Open a Web browser, and then type the printer IP address in the address field.
Notes:
-
Print a network setup page or menu settings page, and then locate the IP address in TCP/IP
section. The IP address appears as four sets of numbers separated by periods, such as
123.123.123.123.
-
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2. Click Settings >Paper Menu >Custom Types.
3. Select a custom paper type name, and then select a custom paper type.
Note: Plain Paper is the factory default paper type for all user-defined custom names.
4. Click Submit.
Using the printer settings on the computer
Depending on your operating system, access the Custom menu using the Local Printer Settings Utility or
Printer Settings.
- 20 -
Quick Reference
Assigning a custom paper type
Using the Embedded Web Server
1. Open a Web browser, and then type the printer IP address in the address field.
Notes:
-
Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP
section. The IP address appears as four sets of numbers separated by periods, such as
123.123.123.123.
-
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2. Click Settings >Paper Menu.
3. From the Tray Configuration section, select a paper source, and then select a custom paper type
under the paper type column.
4. Click Submit.
Using the printer settings on the computer
Depending on your operating system, access the Paper menu using the Local Printer Settings Utility or
Printer Settings.
- 21 -
Quick Reference
3—Printing
Printing documents
Printing a document
1. From the Embedded Web Server or your computer, set the paper size and type in the Paper menu to
match the paper loaded in the tray.
Note: If the printer is not connected to a network, then access the Paper menu using Local Printer
Settings Utility or Printer Settings, depending on your operating system.
2. Send the print job.
For Windows users
a. With a document open, click File >Print.
b. Click Properties, Preferences, Options, or Setup.
c.
Adjust the settings, if necessary.
d. Click OK >Print.
Note: For details on the Printing Preferences settings, refer to the Help for the Driver.
- 22 -
Quick Reference
For Macintosh users
a. Customize the settings in the Page Setup dialog.
1. With a document open, choose File >Page Setup.
2. Choose a paper size or create a custom size to match the paper loaded.
3. Click OK.
b. Customize the settings in the Print dialog.
1. With a document open, choose File >Print.
If necessary, click the disclosure triangle to see more options.
2. From the Print dialog and pop-up menus, adjust the settings if necessary.
Note: To print on a specific paper type, adjust the paper type setting to match the paper
loaded, or select the appropriate tray or feeder.
3. Click Print.
Adjusting toner darkness
Using the Embedded Web Server
1. Open a Web browser, and then type the printer IP address in the address field.
Notes:
-
Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP
section. The IP address appears as four sets of numbers separated by periods, such as
123.123.123.123.
-
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2. Click Settings >Print Settings >Quality Menu.
3. Adjust the toner darkness setting.
4. Click Submit.
Using the printer settings on the computer
Depending on your operating system, adjust the toner darkness settings using the Local Printer Settings
Utility or Printer Settings.
- 23 -
Quick Reference
Canceling a print job
Canceling a print job from the computer
For Windows users
1. Open the printers folder.
a. Click
, or click Start and then click Run.
b. In the Start Search or Run dialog, type control printers.
c.
Press Enter, or click OK.
2. Double-click the printer icon.
3. Select the print job you want to cancel.
4. Click Delete.
For Macintosh users
1. From the Apple Menu, navigate to either of the following:
-
System Preferences >Print & Scan > select a printer >Open Print Queue
-
System Preferences >Print & Fax > select a printer >Open Print Queue
2. From the printer window, select the print job you want to cancel, and then click Delete.
- 24 -
Quick Reference
4—Clearing jams
Accessing jam areas
Open the doors and pull out the trays to access jam areas.
Access area
Description
1
Standard bin
2
Rear door
3
Standard 250-sheet tray (Tray 1)
4
Optional 250- or 550-sheet tray (Tray 2)
5
Multipurpose feeder door
6
Front door
Notes:
•
When Jam Assist is set to On, the printer automatically flushes blank pages or pages with partial
prints to the standard bin after a jammed page has been cleared. Check your printed output stack for
discarded pages.
•
When Jam Recovery is set to On or Auto, the printer reprints jammed pages. However, the Auto
setting does not guarantee that the page will print.
- 25 -
Quick Reference
[x]-page jam, open front door. [20y.xx]
- On
- On
If the printer control panel light sequence matches the light sequence in the preceding illustration, then
press
twice quickly to see the supplemental light sequence.
- On
- On
- On
If the supplemental light sequence matches the light sequence in the preceding illustration, then do the
following.
- 26 -
Quick Reference
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from
a hot component, allow the surface to cool before touching it.
1. Press the button on the right side of the printer, and then open the front door.
2. Pull out the toner cartridge using the handle.
3. Lift the blue handle, and then pull the imaging unit out of the printer.
Warning—Potential Damage: Do not touch the photoconductor drum. Doing so may affect the print
quality of future print jobs.
- 27 -
Quick Reference
4. Place the imaging unit aside on a flat, smooth surface.
Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10
minutes. Extended exposure to light can cause print quality problems.
5. Lift the green flap in front of the printer.
6.
Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
- 28 -
Quick Reference
7. Insert the imaging unit by aligning the arrows on the side rails of the unit with the arrows on the side
rails inside the printer, and then insert the imaging unit into the printer.
8. Insert the toner cartridge by aligning the side rails of the cartridge with the arrows on the side rails
inside the printer, and then insert the cartridge into the printer.
9. Close the front door.
10. From the printer control panel, press
to clear the message and continue printing.
[x]-page jam, open rear door. [20y.xx]
- 29 -
Quick Reference
- On
- On
If the printer control panel light sequence matches the light sequence in the preceding illustration, then
press
twice quickly to see the supplemental light sequence.
- On
- On
- On
If the supplemental light sequence matches the light sequence in the preceding illustration, then do the
following.
1. Press the button on the right side of the printer, and then open the front door.
- 30 -
Quick Reference
2. Gently pull down the rear door.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury
from a hot component, allow the surface to cool before touching it.
3. Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
4. Close the rear and front doors.
5. From the printer control panel, press
to clear the message and continue printing.
- 31 -
Quick Reference
[x]-page jam, clear standard bin. [20y.xx]
- On
- On
If the printer control panel light sequence matches the light sequence in the preceding illustration, then
press
twice quickly to see the supplemental light sequence.
- On
- On
- On
If the supplemental light sequence matches the light sequence in the preceding illustration, then do the
following.
- 32 -
Quick Reference
1. Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
2. From the printer control panel, press
to clear the message and continue printing.
[x]-page jam, remove tray 1 to clear duplex. [23y.xx]
- On
- On
If the printer control panel light sequence matches the light sequence in the preceding illustration, then
press
twice quickly to see the supplemental light sequence.
- 33 -
Quick Reference
Supplemental light sequences
Light sequence
- On
- On
- On
- On
- Blinking
- On
- On
- On
- On
- 34 -
Quick Reference
If the supplemental light sequence matches any of the light sequences in the preceding illustrations, then
do the following.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from
a hot component, allow the surface to cool before touching it.
1. Pull out the tray completely.
2. Locate the blue lever, and then pull it down to release the jam.
Note: If the jammed paper is not visible in the duplex area, then open the rear door, and then gently
remove the jammed paper. Make sure all paper fragments are removed.
- 35 -
Quick Reference
3. Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
4. Insert the tray.
5. From the printer control panel, press
to clear the message and continue printing.
[x]-page jam, remove tray [x]. [24y.xx]
- On
- On
If the printer control panel light sequence matches the light sequence in the preceding illustration, then
press
twice quickly to see the supplemental light sequence.
- 36 -
Quick Reference
Supplemental light sequences
Light sequence
- On
- On
- On
- On
- On
- On
- On
- On
If the supplemental light sequence matches any of the light sequences in the preceding illustrations, then
do the following.
- 37 -
Quick Reference
1. Pull out the tray completely.
2. Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
3. Insert the tray.
4. From the printer control panel, press
to clear the message and continue printing.
- 38 -
Quick Reference
[x]-page jam, clear manual feeder. [250.xx]
- On
- On
If the printer control panel light sequence matches the light sequence in the preceding illustration, then
press
twice quickly to see the supplemental light sequence.
- 39 -
Quick Reference
- On
- On
- On
- On
If the supplemental light sequence matches the light sequence in the preceding illustration, then do the
following.
1. From the multipurpose feeder, firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
2. Flex the sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the
paper. Straighten the edges on a level surface.
3. Reload paper into the multipurpose feeder.
Note: Make sure the paper guide lightly rests against the edge of the paper.
4. From the printer control panel, press
to clear the message and continue printing.
- 40 -
www.develop.eu
A63P-9567-01A
Konica Minolta Business Solutions Europe GmbH
Europaallee 17
D-30855 Langenhagen
Germany
Phone +49 (0)511 7404-0