NF560-A2G/NF520-A2G Setup Manual
FCC Information and Copyright
This equipment has been tes ted and found to comply with the limits of a Class
B digital devic e, purs uant to Part 15 of the FCC Rules . T hese limits are designed
to provide reasonable protec tion against harmful interference in a residential
installation. T his equipment generates , uses , and c an radiate radio frequency
energy and, if not ins talled and used in accordance with the instructions , may
cause harmful interference to radio communications . There is no guarantee
that interference will not occur in a particular ins tallation.
The vendor makes no representations or warranties with respec t to the
contents here and s pecially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make c hanges to the c ontents here without obligation to
notify any party beforehand.
D uplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be c hanged without notice and
we will not be res ponsible for any mis takes found in this user’s manual. All the
brand and produc t names are trademarks of their respec tive companies .
Table of Contents
Chapter 1: Introduction ............................................. 1
1.1
1.2
1.3
1.4
1.5
1.6
Before You Start................................................................... 1
Package Checklist................................................................ 1
Motherboard Features.......................................................... 2
Rear Panel Connectors (for Ver 5.x)....................................... 4
Rear Panel Connectors (for Ver 6.x )....................................... 4
Motherboard Layout ............................................................ 5
Chapter 2: Hardware Installation.............................. 6
2.1
2.2
2.3
2.4
Installing Central Processing Unit (CPU) ................................ 6
FAN Headers........................................................................ 8
Installing System Memory...................................................... 9
Connectors and Slots ............................................................11
Chapter 3: Headers & Jumpers Setup .....................13
3.1
3.2
How to Setup Jumpers..........................................................13
Detail Settings.....................................................................13
Chapter 4: NVIDIA RAID Functions.........................19
4.1
4.2
4.3
Operation System................................................................19
Raid Arrays.........................................................................19
How RAID Works.................................................................19
Chapter 5: Useful Help .............................................23
5.1
5.2
5.3
5.4
Driver Installation Note .......................................................23
Award BIOS Beep Code........................................................24
Extra Information................................................................24
Troubleshooting...................................................................25
Chapter 6: WarpSpeeder™ III .................................26
6.1
6.2
6.3
6.4
Introduction........................................................................26
System Requirement............................................................26
Installation .........................................................................27
WarpSpeeder™ III ................................................................28
Appendencies: SPEC In Other Language ................34
German................................................................................................34
France..................................................................................................36
Italian..................................................................................................38
Spanish ................................................................................................40
Portuguese...........................................................................................42
Polish...................................................................................................44
Russian ................................................................................................46
Arabic..................................................................................................48
Japanese ..............................................................................................50
NF560-A2G/NF520-A 2G
CHAPTER 1: INTRODUCTION
1.1 BEFORE YOU ST ART
Thank you for choosing our product. Be fore you start installing the
mothe rboard, please make sure you follow the instructions be low:
„ Prepare a dry and stable work ing environment with
sufficie nt lighting.
„ Always disconne ct the compute r from powe r outle t
be fore ope ration.
„ Before you take the mothe rboard out from anti-static
bag, ground yourse lf prope rly by touching any safe ly
grounde d appliance, or use grounded wrist strap to
remove the static charge.
„ Avoid touching the compone nts on mothe rboard or the
rear side of the board unless ne cessary. Hold the board
on the edge , do not try to be nd or flex the board.
„
„
1.2
Do not leave any unfastene d small parts inside the
case afte r installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the compute r from dange rous a rea, such as hea t
source , humid air and wate r.
PACKAGE CHECKLIST
HDD Cable X 1
Se rial ATA Cable X 1
Rear I/O Panel for ATX Case X 1
Use r’s Manual X 1
Fully Se tup Drive r C D X 1
FDD Cable X 1 (optional)
USB 2.0 Cable X1 (optional)
S/PDIF out Cable X 1 (optional)
Note: The package contents may differ by area or your motherboard version.
1
Motherboard Manual
1.3
MOT HERBOARD FEAT URES
NF560-A2G
Socket AM2
NF520-A2G
Socket AM2
AMD Athlon 64 / Athlon 64 FX / Althlon 64 X2 / AMD Athlon 64 / Athlon 64 FX / Althlon 64 X2 /
CPU
FSB
Chipset
Sempron processors
Sempron processors
AMD 64 Architecture enables 32 and 64 bit
AMD 64 Architecture enables 32 and 64 bit
computing
computing
Supports Hyper Transport and Cool=n=Quiet
Supports Hyper Transport and Cool=n=Quiet
Support HyperTransport
Support HyperTransport
Supports up to 1GHz Bandwidth
Supports up to 1GHz Bandwidth
nVIDIA nForce 560
nVIDIA nForce 520
ITE 8716F
ITE 8716F
Provides the most commonly used legacy Super Provides the most commonly used legacy Super
I/O functionality.
I/O functionality.
Low Pin Count Interface
Low Pin Count Interface
Environment Control initiatives,
Environment Control initiatives,
H/W Monitor
H/W Monitor
Fan Speed Controller
Fan Speed Controller
ITE's "Smart Guardian" function
ITE's "Smart Guardian" function
DDR2 DIMM Slot x 4
DDR2 DIMM Slot x 4
Each DIMM supports 256/512/1024/2048 MB
Each DIMM supports 256/512/1024/2048 MB
DDR2
DDR2
Main
Max Memory Capicity 8G
Max Memory Capicity 8G
Memory
Dual Channel Mode DDR2 memory module
Dual Channel Mode DDR2 memory module
Supports DDR2 533/667/800
Supports DDR2 533/667/800
Registered DIMM and ECC DIMM is not
Registered DIMM and ECC DIMM is not
supported
supported
Integrated IDE Controller
Integrated IDE Controller
Super I/O
IDE
SATA
LAN
2
Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode
supports PIO Mode 0~4,
supports PIO Mode 0~4,
Integrated Serial ATA Controller
Integrated Serial ATA Controller
Data transfer rates up to 3.0 Gb/s.
Data transfer rates up to 3.0 Gb/s.
SATA Version 2.0 specification compliant.
SATA Version 2.0 specification compliant.
Marvell 88E8056 / 88E8039 (optional)
Marvell 88E8056 / 88E8039 (optional)
10 / 100 Mb/s / 1Gb/s auto negotiation (Gigabit 10 / 100 Mb/s / 1Gb/s auto negotiation (Gigabit
bandwidth is for Marvell 88E8056 only)
bandwidth is for Marvell 88E8056 only)
Half / Full duplex capability
Half / Full duplex capability
NF560-A2G/NF520-A 2G
NF560-A2G
Sound
Slots
NF520-A2G
ALC888 (Ver 5.x) / ALC662 (Ver 6.x)
ALC888 (Ver 5.x) / ALC662 (Ver 6.x)
7.1 channels audio out (ALC888)
7.1 channels audio out (ALC888)
5.1 channels audio out (ALC662)
5.1 channels audio out (ALC662)
Supports HD Audio
Supports HD Audio
PCI slot
x3
PCI slot
PCI Express x16 slot
x1
PCI Express x16 slot
x3
x1
PCI Express x 1 slot
x2
PCI Express x 1 slot
x2
Floppy Connector
x1
Floppy Connector
x1
Printer Port Connector
x1
Printer Port Connector
x1
IDE Connector
x1
IDE Connector
x1
SATA Connector
x4
SATA Connector
x4
Front Panel Connector
x1
Front Panel Connector
x1
Front Audio Connector
x1
Front Audio Connector
x1
On Board
CD-in Connector
x1
CD-in Connector
x1
Connector
S/PDIF out Connector
x1
S/PDIF out Connector
x1
CPU Fan Header
x1
CPU Fan Header
x1
Back Panel
I/O
System Fan Header
x1
System Fan Header
x1
USB Connector
x3
USB Connector
x3
CMOS clear Header
x1
CMOS clear Header
x1
Power Connector (24pin)
x1
Power Connector (24pin)
x1
Power Connector (4pin)
x1
Power Connector (4pin)
x1
PS/2 Keyboard
x1
PS/2 Keyboard
x1
PS/2 Mouse
x1
PS/2 Mouse
x1
Serial Port
x1
Serial Port
x1
LAN port
x1
LAN port
x1
USB Port
x4
USB Port
x4
Audio Jack (Ver 5.x)
x6
Audio Jack (Ver 5.x)
x6
Audio Jack (Ver 6.x)
x3
Audio Jack (Ver 6.x)
x3
Board Size 200 mm (W) x 293 mm (L)
Special
Feature
200 mm (W) x 293 mm (L)
RAID 0 / 1 / 0+1 / 5 support
RAID 0 / 1 / 0+1 support
Windows 2000 / XP / VISTA
Windows 2000 / XP / VISTA
OS Support Biostar Reserves the right to add or remove
support for any OS with or without notice.
Biostar Reserves the right to add or remove
support for any OS with or without notice.
3
Motherboard Manual
1.4
REAR PANEL CONNECT ORS ( FOR V ER 5.X)
PS/2
M ouse
PS/2
Key board
LAN
C OM 1
USBX2
Center
1.5
USBX2
Lin e In
Rear
Lin e Out
Si de
Mi c In
REAR PANEL CONNECT ORS ( FOR V ER 6.X)
PS /2
Mo u se
L AN
L ine In /
S urro un d
Lin e O ut
Mic I n 1/
B a ss/ Ce nt er
PS/ 2
K eyb o ard
4
COM1
USB X2
US BX2
NF560-A2G/NF520-A 2G
1.6
MOT HERBOARD LAYOUT
JKBMS1
JCFAN1
JATXPWR 2
JCOM1
JUSBLAN1
DIMMB2
DIMMA2
A M2
DIMMA1
Socket
JUSB1
DIMMB1
JPRNT1
JATXPWR 1
J AU DIO2
( fo r Ver 5 .x )
JAUD IO1
(for Ver 6.x)
SATA3 SATA4
PEX1_1
PEX1_2
BAT1
J CDIN1
Super I/O
SAT A1 SATA2
PEX16_1
Cod ec
BIOS
LAN
IDE1
nForce
520 / 560
JAUD IOF 1
PCI1
J USB2 JU SB3 JUSB4
PCI2
FDD1
JSPDIF_ O UT1
PCI3
JCMOS1
JSFAN1
JPANEL1
st
Not e: ■ represe nts the 1 pin.
5
Motherboard Manual
CHAPTER 2: HARDWARE INSTALLATION
2.1 INST ALLING CENT RAL PROCESSING UNIT (CPU)
Step 1: Remove the socket protection cap.
Step 2: Pull the lever toward direction A from the socket and then raise the
lever up to a 90-degree angle.
Step 3: Look for the white triangle on socket, and the gold triangle on
CPU should point forwards this white triangle. The CPU will fit
only in the correct orientation.
6
NF560-A2G/NF520-A 2G
Step 4: Hold the CPU down firmly, and then close the lever toward direct
B to complete the installation.
Step 5: Put the CPU Fan on the CPU and buckle it. Connect the CPU
FAN power cable to the JCFAN1. This completes the installation.
7
Motherboard Manual
2.2
FAN HEADERS
These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.
JCFAN1: CPU Fan Heade r
1
4
Pin
1
2
3
4
Assignment
Ground
+12V
FAN RPM
rate sense
Smart Fan
Control
JSFAN1: System Fan He ader
Pin
1
2
3
3
Assignment
Ground
+12V
FAN RPM rate
sense
1
Note:
The JCFAN1 supports 4-pin head connec tor, and JSFAN1s upports 3-pin head c onnector.
When connecting with wires onto c onnectors, please note that the red wire is the positive
and should be c onnec ted to pin#2, and the blac k wire is Gr ound and should be
connected to GND.
8
NF560-A2G/NF520-A 2G
2.3
INST ALLING SYST EM MEMORY
DIMMA1
DIMMB1
DIMMA2
DIMMB2
A. Memory Modules
1.
Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.
2.
Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.
9
Motherboard Manual
B. Memory Capacity
Total Memory
Size
DIMM Socket
Location
DIMMA1
256MB/512MB/1024MB/2048MB
DIMMB1
256MB/512MB/1024MB/2048MB
DIMMA2
256MB/512MB/1024MB/2048MB
DIMMB2
256MB/512MB/1024MB/2048MB
DDR2 Module
Max is 8GB.
C. Dual Channel Memory installation
To trigger the Dual Channel function of the motherboard, the memory
module must meet the following requirements:
Install memory module of the same density in pairs, shown in the
following table.
Dual Channel Status
Enabled
DIMMA1
O
DIMMB1
O
DIMMA2
X
DIMMB2
X
Enabled
X
X
O
O
Enabled
O
O
O
O
(O means memory installed, X means memory not installed.)
The DRAM bus width of the memory module must be the same (x8 or
x16)
10
NF560-A2G/NF520-A 2G
2.4
CONNECT ORS AND SLOT S
FDD1: Floppy Disk Conne ctor
The motherboard prov ides a standard floppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk ty pes. This connector supports the
prov ided f loppy drive ribbon cables.
2
34
1
33
IDE1: Hard Disk Conne ctor
The motherboard has a 32-bit Enhanced PCI IDE Controller that prov ides PIO
Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 f unctionality.
The IDE connector can connect a master and a slave drive, so y ou can connect
up to two hard disk driv es.
40
39
2
1
11
Motherboard Manual
PEX16_1: PCI-Express x16 Slot
-
PCI-Express 1.0a compliant.
Maximum theoretical realized bandwidth of 4GB/s simultaneously per
direction, f or an aggregate of 8GB/s totally.
PEX1_1/ PEX1_2: PCI-Express x1 Slots
-
PCI-Express 1.0a compliant.
-
Data transf er bandwidth up to 250MB/s per direction; 500MB/s in total.
PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins.
2X bandwidth ov er the traditional PCI architecture.
PEX1_1
PEX1_2
PEX16_1
PCI1/PCI2/PCI3: Peripheral Component Interconne ct Slots
This motherboard is equipped with 3 standard PCI slots. PCI stands f or
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.
PCI1
PCI2
PCI3
12
NF560-A2G/NF520-A 2G
CHAPTER 3: HEADERS & JUMPERS SETUP
3.1 HOW T O SET UP JUMPERS
The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.
Pin opened
3.2
Pin closed
Pin1-2 closed
DET AIL SETT INGS
JPANEL1: Front Panel Heade r
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED,
Sleep button, speaker Connection. It allows user to connect the PC case’s
front panel switch functions.
SLP
PWR_LED
On/Off
++ -
9
1
+ SPK
Pin
1
2
3
4
5
6
7
8
Assignment
+5V
N/A
N/A
Speaker
HDD LED (+)
HDD LED (-)
Ground
Reset control
Functio n
Speaker
Connector
Hard drive
LED
Reset button
Pin
9
10
11
12
13
14
15
16
16
8
RST
HLED
Assignment
Sleep control
Ground
N/A
Power LED (+)
Power LED (+)
Power LED (-)
Power button
Ground
Functio n
Sleep button
N/A
Power LED
Power-on button
13
Motherboard Manual
ATX Powe r Source Conne ctor: JATXPWR1
JATXPWR1 allows user to connect 24-pin power connector on the ATX power
supply.
Pin
Assignment
1
2
3
4
5
6
7
8
9
10
11
12
+3.3V
+3.3V
Ground
+5V
Ground
+5V
Ground
PW_OK
Standby Voltage+5V
+12V
+12V
+3.3V
Pin
12
24
1
13
Assignment
13
14
15
16
17
18
19
20
21
22
23
24
+3.3V
-12V
Ground
PS_ON
Ground
Ground
Ground
NC
+5V
+5V
+5V
Ground
JATXPWR2: ATX Powe r Source Conne ctor
By connecting this connector, it will provide +12V to CPU power circuit.
2
1
3
4
Pin
1
2
3
4
14
Assignment
+12V
+12V
Ground
Ground
NF560-A2G/NF520-A 2G
JUSB2/JUSB3/JUSB4: He ade rs for USB 2.0 Ports at Front Panel
This header allows user to connect additional USB cable on the PC f ront panel,
and also can be connected with internal USB devices, like USB card reader.
JU SB2 JUSB3 JUSB4
2
10
1
9
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
+5V (fused)
+5V (fused)
USBUSBUSB+
USB+
Ground
Ground
Key
NC
SATA1/SATA2/SATA3/SATA4: Se rial ATA Conne ctors
The motherboard has a PCI to SATA Controller with 4 channels SATA interf ace,
it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.
SATA3 SATA4
SATA1 SATA2
7
4
Pin
1
2
3
4
5
6
7
Assignment
Ground
T X+
T XGround
RXRX+
Ground
1
15
Motherboard Manual
JAUDIO F1: Front Panel Audio Heade r
This header allows user to connect the front audio output cable with the PC f ront
panel. It will disable the output on back panel audio connectors.
1
2
9
10
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
Mic Left in
Ground
Mic Right in
GPIO
Right line in
Jack Sense
Front Sense
Key
Left line in
Jack Sense
JCDIN1: CD-RO M Audio-in Connector
This connector allows user to connect the audio source f rom the v ariaty dev ices,
like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc.
Pin
1
4
16
1
2
3
4
Assignment
Left Channel
Input
Ground
Ground
Right Channel
Input
NF560-A2G/NF520-A 2G
JSPDIF_O UT1: Digital Audio-out Conne ctor
This connector allows user to connect the PCI bracket SPDIF output header.
Pin
1
2
3
3
Assignment
+5V
SPDIF_OUT
Ground
1
JCMO S1: Cle ar CMOS Heade r
By placing the jumper on pin2-3, it allows user to restore the BIOS saf e setting
and the CMOS data, please carefully f ollow the procedures to avoid damaging
the motherboard.
1
3
Pin 1-2 Close:
Normal Operation (default).
1
1
3
3
Pin 2-3 Close:
Clear CMOS data.
※ Clear CMOS Proce dures:
1.
2.
3.
4.
5.
6.
Remov e AC power line.
Set the jumper to “Pin 2-3 close”.
Wait f or f ive seconds.
Set the jumper to “Pin 1-2 close”.
Power on the AC.
Reset y our desired password or clear the CMOS data.
17
Motherboard Manual
JPRNT1: Printe r Port Connector
This header allows you to connector printer on the PC.
1
2
25
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
18
Assignment
-Strobe
-ALF
Data 0
-Error
Data 1
-Init
Data 2
-Scltin
Data 3
Ground
Data 4
Ground
Data 5
Pin
14
15
16
17
18
19
20
21
22
23
24
25
26
Assignment
Ground
Data 6
Ground
Data 7
Ground
-ACK
Ground
Busy
Ground
PE
Ground
SCLT
Key
NF560-A2G/NF520-A 2G
CHAPTER 4: NVIDIA RAID FUNCTIONS
4.1 O PERAT ION SYST EM
z
Supports Windows XP Home/Prof essional Edition, and Windows 2000 Prof essional.
4.2
RAID ARRAYS
NVRAID supports the f ollowing ty pes of RAID arrays:
RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for
many applications.
RAID 1: RAID 1 defines techniques for mirroring data.
RAID 0+1: RAID 0+1 combines the techniques used in RAID 0 and RAID 1.
RAID 5: RAID 5 provides fault tolerance and better utilization of disk capacity.
4.3
HOW RAID WORKS
RAID 0:
The controller “ stripes” data across multiple drives in a RAID 0 array system. It breaks
up a large file into smaller blocks and performs disk reads and writes across multiple
drives in parallel. The size of each block is determined by the stripe size parameter,
which you set during the creation of the RAID set based on the system environment. This
technique reduces overall disk access time and offers high bandwidth.
Features and Benefits
­
­
­
­
­
Drives: Minimum 1, and maximum is up to 6 or 8. Depending on the
platf orm.
Uses: Intended for non-critical data requiring high data throughput, or any
env ironment that does not require f ault tolerance.
Benefits: prov ides increased data throughput, especially f or large files. No
capacity loss penalty f or parity.
Drawbacks: Does not deliver any fault tolerance. If any drive in the array
f ails, all data is lost.
Fault Tolerance: No.
Block 1
Blo ck 3
Blo ck 5
Bl ock 2
Block 4
Block 6
19
Motherboard Manual
RAID 1:
Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1
array system. The mirrored (backup) copy of the data can reside on the same disk or on a
second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the
active volume or drive is corrupted or becomes unavailable because of a hardware failure.
RAID techniques can be applied for high-availability solutions, or as a form of automatic
backup that eliminates tedious manual backups to more expensive and less reliable
media.
Features and Benefits
­
­
­
­
­
Drives: Minimum 2, and maximum is 2.
Uses: RAID 1 is ideal f or small databases or any other application that
requires f ault tolerance and minimal capacity.
Benefits: Prov ides 100% data redundancy. Should one driv e f ail, the
controller switches to the other drive.
Drawbacks: Requires 2 driv es for the storage space of one driv e.
Perf ormance is impaired during driv e rebuilds.
Fault Tolerance: Yes.
Block 1
Block 2
Block 3
20
Block 1
Block 2
Block 3
NF560-A2G/NF520-A 2G
RAID 0+1:
RAID 0 drives can be mirrored using RAID 1 techniques. Resulting in a RAID 0+1
solution for improved performance plus resiliency.
Features and Benefits
­
­
­
­
Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.
Benefits: Optimizes for both fault tolerance and perf ormance, allowing for
automatic redundancy. May be simultaneously used with other RAID lev els
in an array, and allows for spare disks.
Drawbacks: Requires twice the available disk space f or data redundancy,
the same as RAID level 1.
Fault Tolerance: Yes.
Block 1
Bl ock 3
Bl ock 5
Blo ck 2
Blo ck 4
Blo ck 6
Blo ck 1
Block 3
Block 5
Block 2
Block 4
Block 6
21
Motherboard Manual
RAID 5:
RAID 5 stripes both data and parity information across three or more drives. It writes
data and parity blocks across all the drives in the array. Fault tolerance is maintained by
ensuring that the parity information for any given block of data is placed on a different
drive from those used to store the data itself.
Features and Benefits
­
­
­
­
­
Drives: Minimum 3.
Uses: RAID 5 is recommended for transaction processing and general
purpose service.
Benefits: An ideal combination of good performance, good fault tolerance,
and high capacity and storage efficiency.
Drawbacks: Individual block data transfer rate same as a single disk. Write
perf ormance can be CPU intensiv e.
Fault Tolerance: Yes.
Disk 1
DATA 1
DATA 3
PARITY
DATA 7
DATA 9
PARITY
Disk 2
DATA 2
PARITY
DATA 5
DATA 8
PARITY
DATA 11
Disk 3
PARITY
DATA 4
DATA 6
PARITY
DATA 10
DATA 12
※
22
For more detailed setup information, please refer to the Driver CD, or go to
http://www.nvidia.com/page/pg_20011106217193.html to download NVIDIA nForce Tutorial Flash.
NF560-A2G/NF520-A 2G
CHAPTER 5: USEFUL HELP
5.1 DRIVER INST ALLAT ION NOT E
After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system
performance.
You will see the following window after you insert the CD
The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you ins ert the Driver CD, please use file brows er to
locate and execute the file SETUP.EXE under your optical drive.
A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.
B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.
C. Manual
Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat R eader to open the manual file. Pleas e download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep 2.html
23
Motherboard Manual
5.2
AWARD BIOS BEEP CODE
Beep Sound
One long beep followed by two short
beeps
High-low siren sound
Meaning
Video card not found or v ideo card
memory bad
CPU overheated
System will shut down automatically
One Short beep when system boot-up No error found during POST
Long beeps every other second
No DRAM detected or install
5.3
EXT RA INFORMAT ION
CPU Overheated
If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.
When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not
power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.
24
NF560-A2G/NF520-A 2G
5.4
TROUBLESHOOT ING
Probable
Solution
1.
Make sure power cable is
No power to the system at all
securely plugged in.
Power light don’t illuminate, f an
inside power supply does not turn 2.
Replace cable.
on.
3.
Contact technical support.
2.
Indicator light on key board does
not turn on.
System inoperativ e. Keyboard lights
Using even pressure on both ends of
are on, power indicator lights are lit,
the DIMM, press down firmly until the
and hard driv e is spinning.
module snaps into place.
1.
System does not boot from hard disk
1.
driv e, can be booted f rom optical driv e.
Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged
in; check the driv e type in the
standard CMOS setup.
2.
Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.
1.
Back up data and applications
System only boots f rom optical driv e.
f iles.
Hard disk can be read and applications
can be used but booting from hard disk 2.
Ref ormat the hard driv e.
is impossible.
Re-install applications and data
using backup disks.
Screen message says “Invalid
Rev iew system’s equipment. Make sure
Conf iguration” or “CMOS Failure.”
correct inf ormation is in setup.
Cannot boot system after installing
1.
Set master/slave jumpers
second hard driv e.
correctly.
2.
Run SETUP program and select
correct driv e types. Call the drive
manuf acturers f or compatibility
with other drives.
25
Motherboard Manual
CHAPTER 6: WARPSPEEDER™ III
6.1
INT RODUCT ION
[WarpSpeeder™ III], a new powerful control utility, features three
user-friendly functions including Overclock Manager, Overvoltage
Manager, and Hardware Monitor.
With the Overclock Manager, users can easily adjust the frequency they
prefer or they can get the best CPU performance with just one click. The
Overvoltage Manager, on the other hand, helps to power up CPU core
voltage and Memory voltage. The cool Hardware Monitor smartly indicates
the temperatures, voltage and CPU fan speed as well as the chipset
information. Also, in the About panel, you can get detail descriptions about
BIOS model and chipsets. In addition, the frequency status of CPU,
memory, VGA and PCI along with the CPU speed are synchronically
shown on our main panel.
Moreover, to protect users' computer systems if the setting is not
appropriate when testing and results in system fail or hang,
[WarpSpeeder™ III] technology assures the system stability by
automatically rebooting the computer and then restart to a speed that is
either the original system speed or a suitable one.
6.2
SYST EM REQUIREMENT
OS Support: Windows 98 SE, Windows Me, Windows 2000, Windows XP,
Windows Vista
DirectX: DirectX 8.1 or above. (The Windows XP operating system
includes DirectX 8.1. If you use Windows XP, you do not need to install
DirectX 8.1.)
26
NF560-A2G/NF520-A 2G
6.3
INST ALLAT ION
1. Execute the setup execution file, and then the following dialog will pop
up. Please click “Next” button and follow the default procedure to
install.
2. When you see the following dialog in setup procedure, it means setup
is completed. Click “Finish” button.
Usage :
The following figures are only for reference, the screen printed in this
user manual will change according to your motherboard on hand.
27
Motherboard Manual
6.4
WARPSPEEDER™ III
1. Desktop Icon
After the [WarpSpeeder™ III] has been installed, a [WarpSpeeder™ III]
icon will appear on the desktop, just like the icon shown below.
Now you can launch the [WarpSpeeder™ III] utility simply by
double-clicking the desktop icon.
2. Main Panel
If you double-click the desktop icon, [WarpSpeeder™ III] will be
launched. Please refer to the following figure; the utility’s first window
you will see is Main Panel.
Main Panel contains fe ature s as follows:
a. Display the CPU Speed, CPU external clock, Memory clock, VGA
clock, and PCI clock information.
b. Contains About, Voltage/Overclock, and Hardware Monitor
Buttons for invoking respective panels. The On/Off button is for
closing the program.
28
NF560-A2G/NF520-A 2G
3. Overclock/Overvoltage Panel
Click the Overclock/Overvoltage button in the Main Panel, the button
will be highlighted and the Overclock/Overvoltage Panel will show
up as the following figure. As you can see, the Overclock Panel is
on the right side, and the Overvoltage Panel is on the left side.
29
Motherboard Manual
O ve rclock Panel contains these fe atures:
a. “Auto-Overclock”:
User can click this button and [WarpSpeeder™ III] will set the best
and stable performance and frequency automatically. A warning
dialog as below will show up to notify you that the system may
become unstable, click on “OK” to proceed.
Then [WarpSpeeder™ III] utility will execute a series of testing
until system fail. Then system will do fail-safe reboot by using
Watchdog function. After reboot, launch the [WarpSpeeder™ III]
utility again and the utility will load the previously verified best and
stable frequency.
b. “Verify”:
If you use the “Manual Adjust” bar to adjust the CPU frequency,
then you can click this button and [WarpSpeeder™ III] will proceed
a testing for current frequency. If the testing is ok, then the current
frequency will be saved into system registry. If the testing fails,
system will do a fail-safe rebooting. After reboot, the
[WarpSpeeder™ III] utility will restore to the hardware default
setting.
Warning:
Manually overclock is potentially dangerous, especially when the
ov erclocking percentage is over 110 %. We strongly recommend you
v erify ev ery speed you overclock by click the Verify button. Or, you can
just click Auto ov erclock button and let [WarpSpeeder™ III]
automatically gets the best result f or y ou.
c.
“V3 Engine”/“V6 Engine”/“V9 Engine”:
Provide user the ability to do real-time overclock adjustment.
d. “Recovery”:
Click this button and the [WarpSpeeder™ III] utility will restore all
values to the hardware default setting.
30
NF560-A2G/NF520-A 2G
O ve rvoltage Panel contains these fe ature s:
a. “CPU Voltage”:
This function allows user to adjust CPU voltage. Click on “+” to
increase or “-“ to decrease the CPU voltage.
b. “Memory Voltage”:
This function allows user to adjust Memory voltage. Click on “+”
to increase or “-“ to decrease the Memory voltage.
4. Hardware Monitor Panel
Click the Hardware Monitor button in Main Panel, the button will be
highlighted and the Hardware Monitor panel will show up as the
following figure.
In this panel, you can get the real-time status information of your
system. The information will be refreshed every 1 second.
31
Motherboard Manual
5. About Panel
Click the “about” button in Main Panel, the button will be highlighted
and the About Panel will show up as the following figure.
In this panel, you can get model name and detail information in hints
of all the chipset that are related to overclocking. You can also get
the the version number of [WarpSpeeder™ III] utility.
Note :
Because the overclock, overvoltage, and hardware monitor features
are controlled by several separate chipset, [WarpSpeeder™ III]
divide these features to separate panels. If one chipset is not on
board, the correlative button in Main panel will be disabled, but will
not interfere other panels’ functions. This property can make
[WarpSpeeder™ III] utility more robust.
32
NF560-A2G/NF520-A 2G
This page is intentionally left blank.
33
Motherboard Manual
APPENDENCIES: SPEC IN OTHER LANGUAGE
GERMAN
NF560-A2G
Sockel AM2
NF520-A2G
Sockel AM2
AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2/ AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2/
CPU
FSB
Chipsatz
Super E/A
Sempron Prozessoren
Die AMD 64-Architektur unterstützt eine 32-Bit- Die AMD 64-Architektur unterstützt eine 32-Bitund 64-Bit-Datenverarbeitung
und 64-Bit-Datenverarbeitung
Unterstützt Hyper Transport und Cool’n’Quiet
Unterstützt Hyper Transport und Cool’n’Quiet
Unterstützt HyperTransport mit einer
Unterstützt HyperTransport mit einer
Bandbreite von bis zu 1 GHz
Bandbreite von bis zu 1 GHz
nVIDIA nForce 560
nVIDIA nForce 520
ITE 8716F
ITE 8716F
Bietet die häufig verwendeten alten Super
Bietet die häufig verwendeten alten Super
E/A-Funktionen.
E/A-Funktionen.
Low Pin Count-Schnittstelle
Low Pin Count-Schnittstelle
Umgebungskontrolle,
Umgebungskontrolle,
Hardware-Überwachung
Hardware-Überwachung
Lüfterdrehzahl-Controller
Lüfterdrehzahl-Controller
"Smart Guardian"-Funktion von ITE
"Smart Guardian"-Funktion von ITE
DDR2 DIMM-Steckplätze x 4
DDR2 DIMM-Steckplätze x 4
Jeder DIMM unterstützt 256MB/512MB/1GB/
Jeder DIMM unterstützt 256MB/512MB/1GB/
2GB DDR2.
2GB DDR2.
Arbeitsspeiche Max. 8GB Arbeitsspeicher
r
IDE
SATA II
LAN
Max. 8GB Arbeitsspeicher
Dual-Kanal DDR2 Speichermodul
Dual-Kanal DDR2 Speichermodul
Unterstützt DDR2 533 / 667 / 800
Unterstützt DDR2 533 / 667 / 800
registrierte DIMMs. ECC DIMMs werden nicht
registrierte DIMMs. ECC DIMMs werden nicht
unterstützt.
unterstützt.
Integrierter IDE-Controller
Integrierter IDE-Controller
Ultra DMA 33 / 66 / 100 / 133 Bus
Ultra DMA 33 / 66 / 100 / 133 Bus
Master-Modus
Master-Modus
Unterstützt PIO-Modus 0~4,
Unterstützt PIO-Modus 0~4,
Integrierter Serial ATA-Controller
Integrierter Serial ATA-Controller
Datentransferrate bis zu 3Gb/s
Datentransferrate bis zu 3Gb/s
Konform mit der SATA-Spezifikation Version
Konform mit der SATA-Spezifikation Version
2.0.
2.0.
Marvell 88E8056 / 88E8039(optional)
Marvell 88E8056 / 88E8039(optional)
10 / 100 / 1000 Mb/s Auto-Negotiation
10 / 100 / 1000 Mb/s Auto-Negotiation
(Gigabit-Bandbreite nur beim Marvell 88E8056) (Gigabit-Bandbreite nur beim Marvell 88E8056)
Halb-/ Vollduplex-Funktion
34
Sempron Prozessoren
Halb-/ Vollduplex-Funktion
NF560-A2G/NF520-A 2G
NF560-A2G
Audio-Codec
NF520-A2G
ALC888 (Ver 5.x) / ALC662 (Ver 6.x)
ALC888 (Ver 5.x) / ALC662 (Ver 6.x)
7.1-Kanal-Audioausgabe (ALC888)
7.1-Kanal-Audioausgabe (ALC888)
5.1-Kanal-Audioausgabe (ALC662)
5.1-Kanal-Audioausgabe (ALC662)
Unterstützt High-Definition Audio
Unterstützt High-Definition Audio
PCI-Steckplatz
x3
PCI-Steckplatz
PCI Express x16 Steckplatz
x1
PCI Express x16 Steckplatz
x1
PCI Express x 1-Steckplatz
x2
PCI Express x 1-Steckplatz
x2
Diskettenlaufwerkanschluss
x1
Diskettenlaufwerkanschluss
x1
Druckeranschluss Anschluss
x1
Druckeranschluss Anschluss
x1
IDE-Anschluss
x1
IDE-Anschluss
x1
SATA-Anschluss
x4
SATA-Anschluss
x4
Fronttafelanschluss
x1
Fronttafelanschluss
x1
Front-Audioanschluss
x1
Front-Audioanschluss
x1
Onboard-Ansc CD-IN-Anschluss
x1
CD-IN-Anschluss
x1
hluss
S/PDIF- Ausgangsanschluss
x1
S/PDIF- Ausgangsanschluss
x1
CPU-Lüfter-Sockel
x1
CPU-Lüfter-Sockel
x1
Steckplätze
Rückseiten-E/
A
System-Lüfter-Sockel
x1
System-Lüfter-Sockel
x1
"CMOS löschen"-Sockel
x1
"CMOS löschen"-Sockel
x1
USB-Anschluss
x3
USB-Anschluss
x3
Stromanschluss (24-polig)
x1
Stromanschluss (24-polig)
x1
Stromanschluss (4-polig)
x1
Stromanschluss (4-polig)
x1
PS/2-Tastatur
x1
PS/2-Tastatur
x1
PS/2-Maus
x1
PS/2-Maus
x1
Serieller Anschluss
x1
Serieller Anschluss
x1
LAN-Anschluss
x1
LAN-Anschluss
x1
USB-Anschluss
x4
USB-Anschluss
x4
Audioanschluss (Ver 5.x)
x6
Audioanschluss (Ver 5.x)
x6
Audioanschluss (Ver 6.x)
x3
Audioanschluss (Ver 6.x)
x3
Platinengröße. 200 mm (B) X 293 mm (L)
Sonderfunktio
nen
OS-Unterstütz
ung
x3
200 mm (B) X 293 mm (L)
Unterstützt RAID 0 / 1 / 0+1 / 5
Unterstützt RAID 0 / 1 / 0+1
Windows 2K / XP / VISTA
Windows 2K / XP / VISTA
Biostar behält sich das Recht vor, ohne
Biostar behält sich das Recht vor, ohne
Ankündigung die Unterstützung für ein
Ankündigung die Unterstützung für ein
Betriebssystem hinzuzufügen oder zu
Betriebssystem hinzuzufügen oder zu
entfernen.
entfernen.
35
Motherboard Manual
FRANCE
NF560-A2G
UC
NF520-A2G
Socket AM2
Socket AM2
Processeurs AMD Athlon 64 / Athlon 64 FX /
Processeurs AMD Athlon 64 / Athlon 64 FX /
Athlon 64 x2/ Sempron
Athlon 64 x2/ Sempron
L'architecture AMD 64 permet le calcul 32 et 64 L'architecture AMD 64 permet le calcul 32 et 64
bits
bits
Prend en charge Hyper Transport et Cool’n’Quiet Prend en charge Hyper Transport et Cool’n’Quiet
Bus frontal
Chipset
Super E/S
Mémoire
principale
IDE
SATA II
Prend en charge Hyper Transport jusqu'à une
Prend en charge Hyper Transport jusqu'à une
bande passante de 1G
bande passante de 1G
nVIDIA nForce 560
nVIDIA nForce 520
ITE 8716F
ITE 8716F
Fournit la fonctionnalité de Super E/S
Fournit la fonctionnalité de Super E/S
patrimoniales la plus utilisée.
patrimoniales la plus utilisée.
Interface à faible compte de broches
Interface à faible compte de broches
Initiatives de contrôle environnementales,
Initiatives de contrôle environnementales,
Moniteur de matériel
Moniteur de matériel
Contrôleur de vitesse de ventilateur
Contrôleur de vitesse de ventilateur
Fonction "Gardien intelligent" de l'ITE
Fonction "Gardien intelligent" de l'ITE
Fentes DDR2 DIMM x 4
Fentes DDR2 DIMM x 4
Chaque DIMM prend en charge des DDR2 de
Chaque DIMM prend en charge des DDR2 de
256/512 Mo et 1Go/2Go
256/512 Mo et 1Go/2Go
Capacité mémoire maximale de 8 Go
Capacité mémoire maximale de 8 Go
Module de mémoire DDR2 à mode à double voie Module de mémoire DDR2 à mode à double voie
Prend en charge la DDR2 533 / 667 / 800
Prend en charge la DDR2 533 / 667 / 800
Les DIMM à registres et DIMM avec code
Les DIMM à registres et DIMM avec code
correcteurs d'erreurs ne sont pas prises en
correcteurs d'erreurs ne sont pas prises en
charge
charge
Contrôleur IDE intégré
Contrôleur IDE intégré
Mode principale de Bus Ultra DMA 33 / 66 / 100 / Mode principale de Bus Ultra DMA 33 / 66 / 100 /
133
133
Prend en charge le mode PIO 0~4,
Prend en charge le mode PIO 0~4,
Contrôleur Serial ATA intégré :
Contrôleur Serial ATA intégré :
Taux de transfert jusqu'à 3 Go/s.
Taux de transfert jusqu'à 3 Go/s.
Conforme à la spécification SATA Version 2.0
Conforme à la spécification SATA Version 2.0
Marvell 88E8056 / 88E8039(optional)
Marvell 88E8056 / 88E8039(optional)
10 / 100 / 1000 Mb/s négociation automatique 10 / 100 / 1000 Mb/s négociation automatique
LAN
36
(La bande passante Gigabit est pour le Marvell
(La bande passante Gigabit est pour le Marvell
88E8056 uniquement)
88E8056 uniquement)
Half / Full duplex capability
Half / Full duplex capability
NF560-A2G/NF520-A 2G
NF560-A2G
Codec audio
Fentes
NF520-A2G
ALC888 (Ver 5.x) / ALC662 (Ver 6.x)
ALC888 (Ver 5.x) / ALC662 (Ver 6.x)
Sortie audio à 7.1 voies (ALC888)
Sortie audio à 7.1 voies (ALC888)
Sortie audio à 5.1 voies (ALC662)
Sortie audio à 5.1 voies (ALC662)
Prise en charge de l'audio haute définition
Prise en charge de l'audio haute définition
Fente PCI
x3
Fente PCI
x3
x1
Slot PCI Express x16
x1
Slot PCI Express x16
Slot PCI Express x 1
x2
Slot PCI Express x 1
x2
Connecteur de disquette
x1
Connecteur de disquette
x1
Connecteur de Port d'imprimante
x1
Connecteur de Port d'imprimante
x1
Connecteur IDE
x1
Connecteur IDE
x1
Connecteur SATA
x4
Connecteur SATA
x4
Connecteur du panneau avant
x1
Connecteur du panneau avant
x1
Connecteur Audio du panneau avant x1
Connecteur Audio du panneau avant x1
Connecteur d'entrée CD
x1
Connecteur d'entrée CD
x1
Connecteur Connecteur de sortie S/PDIF
x1
Connecteur de sortie S/PDIF
x1
embarqué
Embase de ventilateur UC
x1
Embase de ventilateur UC
x1
Embase de ventilateur système
x1
Embase de ventilateur système
x1
Embase d'effacement CMOS
x1
Embase d'effacement CMOS
x1
Connecteur USB
x3
Connecteur USB
x3
Connecteur d'alimentation
x1
Connecteur d'alimentation
x1
x1
Connecteur d'alimentation
(24 broches)
Connecteur d'alimentation
(24 broches)
(4 broches)
Clavier PS/2
x1
(4 broches)
x1
Clavier PS/2
x1
Souris PS/2
x1
Souris PS/2
x1
E/S du
Port série
x1
Port série
x1
panneau
Port LAN
x1
Port LAN
x1
arrière
Port USB
x4
Port USB
x4
Fiche audio (Ver 5.x)
x6
Fiche audio (Ver 5.x)
x6
Fiche audio (Ver 6.x)
x3
Fiche audio (Ver 6.x)
x3
Dimensions
de la carte
200 mm (l) X 293 mm (H)
200 mm (l) X 293 mm (H)
Fonctionnali
tés
Prise en charge RAID 0 / 1 / 0+1 / 5
Prise en charge RAID 0 / 1 / 0+1
Windows 2K / XP / VISTA
Windows 2K / XP / VISTA
spéciales
Support SE Biostar se réserve le droit d'ajouter ou de
Biostar se réserve le droit d'ajouter ou de
supprimer le support de SE avec ou sans préavis. supprimer le support de SE avec ou sans préavis.
37
Motherboard Manual
IT ALIAN
NF560-A2G
Socket AM2
NF520-A2G
Socket AM2
Processori AMD Athlon 64 / Athlon 64 FX / Processori AMD Athlon 64 / Athlon 64 FX /
CPU
Athlon 64 x 2/ Sempron
Athlon 64 x 2/ Sempron
L’architettura AMD 64 abilita l a
L’architettura AMD 64 abilita l a
computazione 32 e 64 bit
computazione 32 e 64 bit
Supporto di Hyper Tra nsport e Cool’ n’Quiet Supporto di Hyper Tra nsport e Cool’ n’Quiet
FSB
Chipset
Super I/O
Supporto di Hyper Transport fi no a 1G di
Supporto di Hyper Transport fi no a 1G di
larghezza di ba nda
larghezza di ba nda
nVIDIA nForce 560
nVIDIA nForce 520
ITE 8716F
ITE 8716F
Fornisce le funzio nalità legacy Super I/O
Fornisce le funzio nalità legacy Super I/O
usate più comunemente.
usate più comunemente.
Interfaccia LPC (L ow Pin Count)
Interfaccia LPC (L ow Pin Count)
Funzioni di co ntrollo dell’ambiente:
Funzioni di co ntrollo dell’ambiente:
Monitoraggio hardware
Monitoraggio hardware
Controller velocità ventolina
Controller velocità ventolina
Funzione "Smart Guardi an" di I TE
Funzione "Smart Guardi an" di I TE
Alloggi DIMM DDR 2 x 4
Alloggi DIMM DDR 2 x 4
Ciascun DIMM supporta DDR2 256/ 512MB e Ciascun DIMM supporta DDR2 256/ 512MB e
1GB/2GB
1GB/2GB
Memoria
Capacità massima della memori a 8GB
Capacità massima della memori a 8GB
principale
Modulo di memoria DDR2 a canale doppio
Modulo di memoria DDR2 a canale doppio
Supporto di DDR2 533 / 667 / 800
Supporto di DDR2 533 / 667 / 800
DIMM registrati e DIMM ECC no n sono
DIMM registrati e DIMM ECC no n sono
supportati
supportati
Controller IDE i ntegrato
Controller IDE i ntegrato
Modalità Bus Master Ultra DMA 33 / 66 /
Modalità Bus Master Ultra DMA 33 / 66 /
100 / 133
100 / 133
Supporto modalità PIO Mode 0- 4
Supporto modalità PIO Mode 0- 4
Controller Serial ATA inte grato
Controller Serial ATA inte grato
Velocità di trasferimento dei dati fi no a 3
Velocità di trasferimento dei dati fi no a 3
Gb/s.
Gb/s.
Compatibile specifiche SATA Versione 2.0.
Compatibile specifiche SATA Versione 2.0.
Marvell 88E8056 / 88E8039(optional)
Marvell 88E8056 / 88E8039(optional)
Negoziazione automatica 10 / 100 / 1000
Negoziazione automatica 10 / 100 / 1000
Mb/s (la lar ghezza di banda Gigabit è solo
Mb/s (la lar ghezza di banda Gigabit è solo
per Marvell 88E8056)
per Marvell 88E8056)
Capacità Half / Full Duplex
Capacità Half / Full Duplex
IDE
SATA II
LAN
38
NF560-A2G/NF520-A 2G
NF560-A2G
NF520-A2G
ALC888 (Ver 5.x) / ALC662 (Ver 6.x)
ALC888 (Ver 5.x) / ALC662 (Ver 6.x)
Codec
Uscita audio 7.1 ca nali (ALC888)
Uscita audio 7.1 ca nali (ALC888)
audio
Uscita audio 5.1 ca nali (ALC662)
Uscita audio 5.1 ca nali (ALC662)
Supporto audio High- Defi nition (HD)
Supporto audio High- Defi nition (HD)
Alloggio PCI
x3
Alloggio PCI
Alloggio PCI Ex press x16
x1
Alloggio PCI Ex press x16
x1
Alloggio PCI Ex press x1
x2
Alloggio PCI Ex press x1
x2
Connettore flo ppy
x1
Connettore flo ppy
x1
Connettore Porta stampa nte
x1
Connettore Porta stampa nte
x1
Connettore IDE
x1
Connettore IDE
x1
Alloggi
x3
Connettore SATA
x4
Connettore SATA
x4
Connettore pa nnello fro ntale
x1
Connettore pa nnello fro ntale
x1
Connettore audio frontale
x1
Connettore audio frontale
x1
Connettore CD-in
x1
Connettore CD-in
x1
Connettori Connettore output SPDIF
x1
Connettore output SPDIF
x1
su scheda Collettore ventolina CPU
x1
Collettore ventolina CPU
x1
Collettore ventolina sistema
x1
Collettore ventolina sistema
x1
Collettore cancellazione CMOS
x1
Collettore cancellazione CMOS
x1
Connettore USB
x3
Connettore USB
x3
Connettore alimentazione
x1
Connettore alimentazione
x1
(24 pin)
Connettore alimentazione
(24 pin)
x1
(4 pi n)
Tastiera PS/2
Connettore alimentazione
x1
(4 pi n)
x1
Tastiera PS/2
x1
Mouse PS/2
x1
Mouse PS/2
x1
I/O
Porta seriale
x1
Porta seriale
x1
pannello
Porta LAN
x1
Porta LAN
x1
posteriore Porta USB
x4
Porta USB
x4
Connettore audio (Ver 5.x)
x6
Connettore audio (Ver 5.x)
x6
Connettore audio (Ver 6.x)
x3
Connettore audio (Ver 6.x)
x3
Dimension
i scheda
200 mm (lar ghezza) x 293 mm (altezza)
200 mm (lar ghezza) x 293 mm (altezza)
Supporto RAID 0 / 1 / 0+1 / 5
Supporto RAID 0 / 1 / 0+1
Windows 2K / XP / VISTA
Windows 2K / XP / VISTA
Biostar si riserva il diritto di aggiungere o
Biostar si riserva il diritto di aggiungere o
rimuovere il supporto di qualsiasi sistema
rimuovere il supporto di qualsiasi sistema
operativo se nza pre avviso.
operativo se nza pre avviso.
Caratterist
iche
speciali
Sistemi
operativi
supportati
39
Motherboard Manual
SPANISH
NF560-A2G
CPU
FSB
Conjunto de
chips
NF520-A2G
Conector AM2
Conector AM2
Procesadores AMD Athlon 64 / Athlon 64 FX /
Procesadores AMD Athlon 64 / Athlon 64 FX /
Athlon 64 x2/ Sempron
Athlon 64 x2/ Sempron
La arquitectura AMD 64 permite el procesado de La arquitectura AMD 64 permite el procesado de
32 y 64 bits
32 y 64 bits
Soporta las tecnologías Hyper Transport y
Soporta las tecnologías Hyper Transport y
Cool’n’Quiet
Cool’n’Quiet
Admite HyperTransport con un ancho de banda Admite HyperTransport con un ancho de banda
de hasta 1G
de hasta 1G
nVIDIA nForce 560
nVIDIA nForce 520
ITE 8716F
ITE 8716F
Le ofrece las funcionalidades heredadas de uso Le ofrece las funcionalidades heredadas de uso
más común Súper E/S.
más común Súper E/S.
Interfaz de cuenta Low Pin
Interfaz de cuenta Low Pin
Iniciativas de control de entorno,
Iniciativas de control de entorno,
Monitor hardware
Monitor hardware
Controlador de velocidad de ventilador
Controlador de velocidad de ventilador
Función "Guardia inteligente" de ITE
Función "Guardia inteligente" de ITE
Ranuras DIMM DDR2 x 4
Ranuras DIMM DDR2 x 4
Cada DIMM admite DDR de 256/512MB y
Cada DIMM admite DDR de 256/512MB y
1GB/2GB
1GB/2GB
Memoria
Capacidad máxima de memoria de 8GB
Capacidad máxima de memoria de 8GB
principal
Módulo de memoria DDR2 de canal Doble
Módulo de memoria DDR2 de canal Doble
Admite DDR2 de 533 / 667 / 800
Admite DDR2 de 533 / 667 / 800
No admite DIMM registrados o DIMM
No admite DIMM registrados o DIMM
compatibles con ECC
compatibles con ECC
Controlador IDE integrado
Controlador IDE integrado
Súper E/S
IDE
SATA II
Modo bus maestro Ultra DMA 33 / 66 / 100 / 133 Modo bus maestro Ultra DMA 33 / 66 / 100 / 133
Soporte los Modos PIO 0~4,
Soporte los Modos PIO 0~4,
Controlador ATA Serie Integrado
Controlador ATA Serie Integrado
Tasas de transferencia de hasta 3 Gb/s.
Tasas de transferencia de hasta 3 Gb/s.
Compatible con la versión SATA 2.0.
Compatible con la versión SATA 2.0.
Marvell 88E8056 / 88E8039 (opcional)
Marvell 88E8056 / 88E8039 (opcional)
Negociación de 10 / 100 / 1000 Mb/s (el ancho Negociación de 10 / 100 / 1000 Mb/s (el ancho
Red Local
40
de banda Gigabit es únicamente para Marvell
de banda Gigabit es únicamente para Marvell
88E8056)
88E8056)
Funciones Half / Full dúplex
Funciones Half / Full dúplex
NF560-A2G/NF520-A 2G
NF560-A2G
NF520-A2G
ALC888 (Ver 5.x) / ALC662 (Ver 6.x)
ALC888 (Ver 5.x) / ALC662 (Ver 6.x)
Códecs de
Salida de sonido de 7.1 canales (ALC888)
Salida de sonido de 7.1 canales (ALC888)
sonido
Salida de sonido de 5.1 canales (ALC662)
Salida de sonido de 5.1 canales (ALC662)
Soporte de sonido de Alta Definición
Soporte de sonido de Alta Definición
Ranuras
Ranura PCI
X3
Ranura PCI
X3
Ranura PCI Express x16
X1
Ranura PCI Express x16
X1
Ranura PCI express x 1
X2
Ranura PCI express x 1
X2
Conector disco flexible
X1
Conector disco flexible
X1
Conector Puerto de impresora
X1
Conector Puerto de impresora
X1
Conector IDE
X1
Conector IDE
X1
Conector SATA
X4
Conector SATA
X4
Conector de panel frontal
X1
Conector de panel frontal
X1
Conector de sonido frontal
X1
Conector de sonido frontal
X1
X1
Conector de entrada de CD
X1
Conectores Conector de salida S/PDIF
Conector de entrada de CD
X1
Conector de salida S/PDIF
X1
en placa
X1
Cabecera de ventilador de CPU
X1
Cabecera de ventilador de CPU
Cabecera de ventilador de sistema X1
Cabecera de ventilador de sistema X1
Cabecera de borrado de CMOS
X1
Cabecera de borrado de CMOS
X1
Conector USB
X3
Conector USB
X3
Conector de alimentación
X1
Conector de alimentación
X1
X1
Conector de alimentación
(24 patillas)
Conector de alimentación
(24 patillas)
(4 patillas)
Teclado PS/2
X1
(4 patillas)
X1
Teclado PS/2
X1
Ratón PS/2
X1
Ratón PS/2
X1
Panel
Puerto serie
X1
Puerto serie
X1
trasero de
Puerto de red local
X1
Puerto de red local
X1
E/S
Puerto USB
X4
Puerto USB
X4
Conector de sonido (Ver 5.x)
X6
Conector de sonido (Ver 5.x)
X6
Conector de sonido (Ver 6.x)
X3
Conector de sonido (Ver 6.x)
X3
Tamaño de
la placa
Funciones
especiales
200 mm. (A) X 293 mm. (H)
200 mm. (A) X 293 mm. (H)
Admite RAID 0 / 1 / 0+1 / 5
Admite RAID 0 / 1 / 0+1
Soporte de Windows 2K / XP / VISTA
Windows 2K / XP / VISTA
sistema
Biostar se reserva el derecho de añadir o retirar Biostar se reserva el derecho de añadir o retirar
operativo
el soporte de cualquier SO con o sin aviso previo. el soporte de cualquier SO con o sin aviso previo.
41
Motherboard Manual
PORT UGUESE
NF560-A2G
CPU
FSB
Chipset
NF520-A2G
Socket AM2
Socket AM2
Processadores AMD Athlon 64 / Athlon 64 FX /
Processadores AMD Athlon 64 / Athlon 64 FX /
Athlon 64 x2/ Sempron
Athlon 64 x2/ Sempron
A arquitectura AMD 64 permite uma computação A arquitectura AMD 64 permite uma computação
de 32 e 64 bits
de 32 e 64 bits
Suporta as tecnologias Hyper Transport e
Suporta as tecnologias Hyper Transport e
Cool’n’Quiet
Cool’n’Quiet
Suporta a tecnologia HyperTransport com uma Suporta a tecnologia HyperTransport com uma
largura de banda até 1G
largura de banda até 1G
nVIDIA nForce 560
nVIDIA nForce 520
ITE 8716F
ITE 8716F
Proporciona as funcionalidades mais utilizadas
Proporciona as funcionalidades mais utilizadas
em termos da especificação Super I/O.
em termos da especificação Super I/O.
Especificaçã Interface LPC (Low Pin Count).
Interface LPC (Low Pin Count).
o Super I/O Iniciativas para controlo do ambiente
Iniciativas para controlo do ambiente
Monitorização do hardware
Monitorização do hardware
Controlador da velocidade da ventoinha
Controlador da velocidade da ventoinha
Função "Smart Guardian" da ITE
Função "Smart Guardian" da ITE
Ranhuras DIMM DDR2 x 4
Ranhuras DIMM DDR2 x 4
Cada módulo DIMM suporta uma memória
Cada módulo DIMM suporta uma memória
DDR2 de 256/512 MB & 1 GB/2 GB
DDR2 de 256/512 MB & 1 GB/2 GB
Memória
Capacidade máxima de memória: 8 GB
Capacidade máxima de memória: 8 GB
principal
Módulo de memória DDR2 de canal duplo
Módulo de memória DDR2 de canal duplo
Suporta módulos DDR2 533 / 667 / 800
Suporta módulos DDR2 533 / 667 / 800
Os módulos DIMM registados e os DIMM ECC
Os módulos DIMM registados e os DIMM ECC
não são suportados
não são suportados
Controlador IDE integrado
Controlador IDE integrado
IDE
SATA II
LAN
42
Modo Bus master Ultra DMA 33 / 66 / 100 / 133 Modo Bus master Ultra DMA 33 / 66 / 100 / 133
Suporta o modo PIO 0~4,
Suporta o modo PIO 0~4,
Controlador Serial ATA integrado
Controlador Serial ATA integrado
Velocidades de transmissão de dados até 3 Gb/s. Velocidades de transmissão de dados até 3 Gb/s.
Compatibilidade com a especificação SATA
Compatibilidade com a especificação SATA
versão 2.0.
versão 2.0.
Marvell 88E8056 / 88E8039(opcional)
Marvell 88E8056 / 88E8039(opcional)
Auto negociação de 10 / 100 / 1000 Mb/s (a
Auto negociação de 10 / 100 / 1000 Mb/s (a
largura de banda Gigabit refere-se apenas à
largura de banda Gigabit refere-se apenas à
especificação Marvell 88E8056)
especificação Marvell 88E8056)
Capacidade semi/full-duplex
Capacidade semi/full-duplex
NF560-A2G/NF520-A 2G
NF560-A2G
NF520-A2G
ALC888 (Ver 5.x) / ALC662 (Ver 6.x)
ALC888 (Ver 5.x) / ALC662 (Ver 6.x)
Codec de
Saída de áudio de 7.1 canais (ALC888)
Saída de áudio de 7.1 canais (ALC888)
som
Saída de áudio de 5.1 canais (ALC662)
Saída de áudio de 5.1 canais (ALC662)
Suporta a especificação High-Definition Audio
Suporta a especificação High-Definition Audio
Ranhura PCI
x3
Ranhura PCI
x3
Ranhura PCI Express x16
x1
Ranhura PCI Express x16
x1
Ranhura PCI Express x 1
x2
Ranhura PCI Express x 1
x2
Conector da unidade de disquetes
x1
Conector da unidade de disquetes
x1
Ranhuras
Conector da para impressora
x1
Conector da para impressora
x1
Conector IDE
x1
Conector IDE
x1
Conector SATA
x4
Conector SATA
x4
Conector do painel frontal
x1
Conector do painel frontal
x1
Conector de áudio frontal
x1
Conector de áudio frontal
x1
Conector para entrada de CDs
x1
Conector para entrada de CDs
x1
x1
Conector de saída S/PDIF
x1
Conector da ventoinha da CPU
x1
Conector da ventoinha da CPU
x1
Conector da ventoinha do sistema
x1
Conector da ventoinha do sistema
x1
Conector para limpeza do CMOS
x1
Conector para limpeza do CMOS
x1
Conector USB
x3
Conector USB
x3
Conector de alimentação
x1
Conector de alimentação
x1
x1
Conector de alimentação
Conectores Conector de saída S/PDIF
na placa
(24 pinos)
Conector de alimentação
(24 pinos)
(4 pinos)
Entradas/S
aídas no
painel
traseiro
Tamanho
da placa
x1
(4 pinos)
Teclado PS/2
x1
Teclado PS/2
x1
Rato PS/2
x1
Rato PS/2
x1
Porta série
x1
Porta série
x1
Porta LAN
x1
Porta LAN
x1
Porta USB
x4
Porta USB
x4
Tomada de áudio (Ver 5.x)
x6
Tomada de áudio (Ver 5.x)
x6
Tomada de áudio (Ver 6.x)
x3
Tomada de áudio (Ver 6.x)
x3
200 mm (L) X 293 mm (A)
200 mm (L) X 293 mm (A)
Suporta as funções RAID 0 / 1 / 0+1 / 5
Suporta as funções RAID 0 / 1 / 0+1
Windows 2K / XP / VISTA
Windows 2K / XP / VISTA
A Biostar reserva-se o direito de adicionar ou
A Biostar reserva-se o direito de adicionar ou
remover suporte para qualquer sistema
remover suporte para qualquer sistema
operativo com ou sem aviso prévio.
operativo com ou sem aviso prévio.
Característi
cas
especiais
Sistemas
operativos
suportados
43
Motherboard Manual
POLISH
NF560-A2G
Procesor
FSB
Chipset
NF520-A2G
Socket AM2
Socket AM2
AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2/
AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2/
Sempron Procesory
Sempron Procesory
Architektura AMD 64 umożliwia przetwarzanie
Architektura AMD 64 umożliwia przetwarzanie
32 i 64 bitowe
32 i 64 bitowe
Obsługa Hyper Transport oraz Cool’n’Quiet
Obsługa Hyper Transport oraz Cool’n’Quiet
Obsługa HyperTransport o szerokości pasma do Obsługa HyperTransport o szerokości pasma do
1G
1G
nVIDIA nForce 560
nVIDIA nForce 520
Gniazda DDR2 DIMM x 4
Gniazda DDR2 DIMM x 4
Każde gniazdo DIMM obsługuje moduły
Każde gniazdo DIMM obsługuje moduły
256/512MB oraz 1GB/2GB DDR2
256/512MB oraz 1GB/2GB DDR2
Pamięć
Maks. wielkość pamięci 8GB
Maks. wielkość pamięci 8GB
główna
Moduł pamięci DDR2 z trybem podwójnego
Moduł pamięci DDR2 z trybem podwójnego
kanału
kanału
Obsługa DDR2 533 / 667 / 800
Obsługa DDR2 533 / 667 / 800
Brak obsługi Registered DIMM oraz ECC DIMM
Brak obsługi Registered DIMM oraz ECC DIMM
ITE 8716F
ITE 8716F
Zapewnia najbardziej powszechne funkcje Super Zapewnia najbardziej powszechne funkcje Super
Super I/O
IDE
SATA II
I/O.
I/O.
Interfejs Low Pin Count
Interfejs Low Pin Count
Funkcje kontroli warunków pracy,
Funkcje kontroli warunków pracy,
Monitor H/W
Monitor H/W
Kontroler prędkości wentylatora
Kontroler prędkości wentylatora
Funkcja ITE "Smart Guardian"
Funkcja ITE "Smart Guardian"
Zintegrowany kontroler IDE
Zintegrowany kontroler IDE
Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master Ultra DMA 33 / 66 / 100 / 133 Tryb Bus Master
obsługa PIO tryb 0~4,
obsługa PIO tryb 0~4,
Zintegrowany kontroler Serial ATA
Zintegrowany kontroler Serial ATA
Transfer danych do 3 Gb/s.
Transfer danych do 3 Gb/s.
Zgodność ze specyfikacją SATA w wersji 2.0.
Zgodność ze specyfikacją SATA w wersji 2.0.
Marvell 88E8056 / 88E8039 (opcja)
Marvell 88E8056 / 88E8039 (opcja)
10 / 100 / 1000 Mb/s z automatyczną negocjacją 10 / 100 / 1000 Mb/s z automatyczną negocjacją
LAN
44
szybkości (Pasmo gigabitowe wyłącznie dla
szybkości (Pasmo gigabitowe wyłącznie dla
Marvell 88E8056)
Marvell 88E8056)
Działanie w trybie połowicznego / pełnego
Działanie w trybie połowicznego / pełnego
dupleksu
dupleksu
NF560-A2G/NF520-A 2G
NF560-A2G
NF520-A2G
ALC888 (Ver 5.x) / ALC662 (Ver 6.x)
ALC888 (Ver 5.x) / ALC662 (Ver 6.x)
7.1 kanałowe wyjście audio (ALC888)
7.1 kanałowe wyjście audio (ALC888)
dźwiękowy 5.1 kanałowe wyjście audio (ALC662)
5.1 kanałowe wyjście audio (ALC662)
Kodek
Obsługa High-Definition Audio
Obsługa High-Definition Audio
Gniazda
Złącza
Gniazdo PCI
x3
Gniazdo PCI
x3
Gniazdo PCI Express x16
x1
Gniazdo PCI Express x16
x1
Gniazdo PCI Express x 1
x2
Gniazdo PCI Express x 1
x2
Złącze napędu dyskietek
x1
Złącze napędu dyskietek
x1
Złącze Port drukarki
x1
Złącze Port drukarki
x1
Złącze IDE
x1
Złącze IDE
x1
Złącze SATA
x4
Złącze SATA
x4
Złącze panela przedniego
x1
Złącze panela przedniego
x1
Przednie złącze audio
x1
Przednie złącze audio
x1
Złącze wejścia CD
x1
Złącze wejścia CD
x1
x1
Złącze wyjścia S/PDIF
x1
wbudowane Złącze wyjścia S/PDIF
Złącze główkowe wentylatora procesora x1
Złącze główkowe wentylatora procesora x1
Złącze główkowe wentylatora systemowego x1 Złącze główkowe wentylatora systemowego x1
Back Panel
I/O
Wymiary
Złącze główkowe kasowania CMOS x1
Złącze główkowe kasowania CMOS x1
Złącze USB
x3
Złącze USB
Złącze zasilania (24 pinowe)
x1
Złącze zasilania (24 pinowe)
x1
Złącze zasilania (4 pinowe)
x1
Złącze zasilania (4 pinowe)
x1
Klawiatura PS/2
x1
Klawiatura PS/2
x1
Mysz PS/2
x1
Mysz PS/2
x1
Port szeregowy
x1
Port szeregowy
x1
Port LAN
x1
Port LAN
x1
Port USB
x4
Port USB
x4
Gniazdo audio (Ver 5.x)
x6
Gniazdo audio (Ver 5.x)
x6
Gniazdo audio (Ver 6.x)
x3
Gniazdo audio (Ver 6.x)
x3
x3
200 mm (S) X 293 mm (W)
200 mm (S) X 293 mm (W)
Obsługa RAID 0 / 1 / 0+1 / 5
Obsługa RAID 0 / 1 / 0+1
Obsluga
Windows 2K / XP / VISTA
Windows 2K / XP / VISTA
systemu
Biostar zastrzega sobie prawo dodawania lub
Biostar zastrzega sobie prawo dodawania lub
płyty
Funkcje
specjalne
operacyjne odwoływania obsługi dowolnego systemu
go
operacyjnego bez powiadomienia.
odwoływania obsługi dowolnego systemu
operacyjnego bez powiadomienia.
45
Motherboard Manual
RUSSIAN
NF560-A2G
CPU
Гнездо AM2
Процессоры AMD Athlon 64 / Athlon 64 FX /
Процессоры AMD Athlon 64 / Athlon 64 FX /
(центральн Althlon 64X2 / Sempron
ый
Архитектура AMD 64 разрешать обработка
процессор) данных на 32 и 64 бит
FSB
Набор
микросхем
Основная
память
NF520-A2G
Гнездо AM2
Althlon 64X2 / Sempron
Архитектура AMD 64 разрешать обработка
данных на 32 и 64 бит
Поддержка Hyper Transport и Cool’n’Quiet
Поддержка Hyper Transport и Cool’n’Quiet
Поддержка HyperTransport с пропускной
Поддержка HyperTransport с пропускной
способностью до 1G
способностью до 1G
nVIDIA nForce 560
nVIDIA nForce 520
Слоты DDR2 DIMM x 4
Слоты DDR2 DIMM x 4
Каждый модуль DIMM поддерживает
Каждый модуль DIMM поддерживает
256/512МБ & 1ГБ/2ГБ DDR2
256/512МБ & 1ГБ/2ГБ DDR2
Максимальная ёмкость памяти 8 ГБ
Максимальная ёмкость памяти 8 ГБ
Модуль памяти с двухканальным режимом
Модуль памяти с двухканальным режимом
DDR2
DDR2
Поддержка DDR2 533 / 667 / 800
Поддержка DDR2 533 / 667 / 800
Не поддерживает зарегистрированные
Не поддерживает зарегистрированные
модули DIMM and ECC DIMM
модули DIMM and ECC DIMM
ITE 8716F
ITE 8716F
Обеспечивает наиболее используемые
Обеспечивает наиболее используемые
действующие функциональные возможности действующие функциональные возможности
Super I/O.
Super I/O
IDE
Интерфейс с низким количеством выводов
Инициативы по охране окружающей среды,
Инициативы по охране окружающей среды,
Аппаратный монитор
Аппаратный монитор
Регулятор скорости
Регулятор скорости
Функция ITE "Smart Guardian"
Функция ITE "Smart Guardian"
(Интеллектуальная защита)
(Интеллектуальная защита)
Встроенное устройство управления
Встроенное устройство управления
встроенными интерфейсами устройств
встроенными интерфейсами устройств
Режим "хозяина" шины Ultra DMA 33 / 66 / 100 Режим "хозяина" шины Ultra DMA 33 / 66 / 100
/ 133
SATA
Super I/O.
Интерфейс с низким количеством выводов
/ 133
Поддержка режима PIO 0~4,
Поддержка режима PIO 0~4,
Встроенное последовательное устройство
Встроенное последовательное устройство
управления ATA
управления ATA
скорость передачи данных до 3 гигабит/с.
скорость передачи данных до 3 гигабит/с.
Соответствие спецификации SATA версия 2.0. Соответствие спецификации SATA версия 2.0.
Marvell 88E8056 / 88E8039 (дополнительно)
Локальная
сеть
Мб/с (гигабитная пропускная способность
Мб/с (гигабитная пропускная способность
только для гигабитного физического уровня) только для гигабитного физического уровня)
Частичная / полная дуплексная способность
46
Marvell 88E8056 / 88E8039 (дополнительно)
Автоматическое согласование 10 / 100 / 1000 Автоматическое согласование 10 / 100 / 1000
Частичная / полная дуплексная способность
NF560-A2G/NF520-A 2G
NF560-A2G
NF520-A2G
ALC888 (Ver 5.x) / ALC662 (Ver 6.x)
ALC888 (Ver 5.x) / ALC662 (Ver 6.x)
Звуковой
7.1канальный звуковой выход (ALC888)
7.1канальный звуковой выход (ALC888)
кодек
5.1канальный звуковой выход (ALC662)
5.1канальный звуковой выход (ALC662)
5.1канальный звуковой выход
7.1канальный звуковой выход
Слоты
Встроенны
й разъём
Слот PCI
x3
Слот PCI
x3
Слот PCI Express x16
x1
Слот PCI Express x16
x1
Слот PCI Express x 1
x2
Слот PCI Express x 1
x2
Разъём НГМД
x1
Разъём НГМД
x1
Разъём Порт подключения принтера x1
Разъём Порт подключения принтера x1
Разъём IDE
x1
Разъём IDE
Разъём SATA
x4
Разъём SATA
x4
Разъём на лицевой панели
x1
Разъём на лицевой панели
x1
Входной звуковой разъём
x1
Входной звуковой разъём
x1
Разъём ввода для CD
x1
Разъём ввода для CD
x1
Разъём вывода для S/PDIF
x1
Разъём вывода для S/PDIF
x1
Контактирующее приспособление
x1
Контактирующее приспособление
вентилятора центрального процессора x1
вентилятора центрального процессора x1
Контактирующее приспособление
Контактирующее приспособление
вентилятора системы
x1
вентилятора системы
x1
Открытое контактирующее приспособление
Открытое контактирующее приспособление
CMOS
x1
CMOS
x1
USB-разъём
x3
USB-разъём
x3
Разъем питания (24 вывод)
x1
Разъем питания (24 вывод)
x1
Разъем питания (4 вывод)
x1
Разъем питания (4 вывод)
x1
Клавиатура PS/2
x1
Клавиатура PS/2
x1
Мышь PS/2
x1
Мышь PS/2
x1
Задняя
Последовательный порт
x1
Последовательный порт
x1
панель
Порт LAN
x1
Порт LAN
x1
средств
USB-порт
x4
USB-порт
x4
ввода-выв Гнездо для по дключ ения
ода
наушников (Ver 5.x)
Гнездо для по дключ ения
x6
наушников (Ver 6.x)
Размер
панели
наушников (Ver 5.x)
x6
Гнездо для по дключ ения
Гнездо для по дключ ения
x3
наушников (Ver 6.x)
200 мм (Ш) X 293 мм (В)
200 мм (Ш) X 293 мм (В)
Поддержка RAID 0 / 1 / 0+1 / 5
Поддержка RAID 0 / 1 / 0+1
Windows 2K / XP / VISTA
Windows 2K / XP / VISTA
x3
Специальн
ые
технически
е
характерис
тики
Поддержка Biostar сохраняет за собой право добавлять
Biostar сохраняет за собой право добавлять
OS
или удалять средства обеспечения для OS с
или удалять средства обеспечения для OS с
или без предварительного уведомления.
или без предварительного уведомления.
47
‫‪Motherboard Manual‬‬
‫‪ARABIC‬‬
‫‪NF560-A2G‬‬
‫وﺣﺪة اﻟﻤﻌ ﺎﻟﺠﺔ‬
‫اﻟﻤﺮآﺰﻳﺔ‬
‫‪NF520-A2G‬‬
‫‪AM2‬ﻡﻘﺒﺲ‬
‫‪AM2‬ﻡﻘﺒﺲ‬
‫‪AMD Athlon 64 / Athlon 64 FX /‬ﻡﻌ ﺎﻟﺠﺎت‬
‫‪AMD Athlon 64 / Athlon 64 FX /‬ﻡﻌ ﺎﻟﺠﺎت‬
‫‪Athlon 64 x2/ Sempron‬‬
‫‪Athlon 64 x2/ Sempron‬‬
‫إﺝﺮاء اﻟﻌ ﻤﻠﻴﺎت اﻟﺤﺎﺳﻮﺏﻴﺔ ﺏﺴﺮﻋﺔ ‪ 32‬و‪ 64‬ﺏﺖ‪AMD 64‬ﺗﻤﻜﻦ ﺗﻘﻨﻴﺔ‬
‫إﺝﺮاء اﻟﻌ ﻤﻠﻴﺎت اﻟﺤﺎﺳﻮﺏﻴﺔ ﺏﺴﺮﻋﺔ ‪ 32‬و‪ 64‬ﺏﺖ‪AMD 64‬ﺗﻤﻜﻦ ﺗﻘﻨﻴﺔ‬
‫‪ Cool’n’Quiet‬و ‪Hyper Transport‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫‪ Cool’n’Quiet‬و ‪Hyper Transport‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫اﻟﻨﺎﻗﻞ اﻷﻡﺎﻡﻲ اﻟﺠﺎﻥﺒﻲ ﺗﺮدد‪ 1000‬ﺏﺘﺮدد ﻳﺼﻞ إﻟﻰ ‪HyperTransport‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫ﻣﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ‬
‫‪nVIDIA nForce 560‬‬
‫ﻓﺘﺤﺔ‪DDR2 DIMM‬‬
‫ﺗﺮدد‪ 1000‬ﺏﺘﺮدد ﻳﺼﻞ إﻟﻰ ‪HyperTransport‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫‪nVIDIA nForce 520‬‬
‫ﻋﺪد‪4‬‬
‫ﻓﺘﺤﺔ‪DDR2 DIMM‬‬
‫ﻋﺪد‪4‬‬
‫ﻡﻴﺠﺎ ‪ 256/512‬ﺳﻌﺔ ‪ DDR2‬ﺗﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮع‪DIMM‬ﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ ﻡﻴﺠﺎ ‪ 256/512‬ﺳﻌﺔ ‪ DDR2‬ﺗﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮع‪DIMM‬ﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ‬
‫اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ‬
‫‪Super I/O‬‬
‫ﻣﻨﻔﺬ ‪IDE‬‬
‫‪SATA II‬‬
‫ﺵﺒﻜﺔ دا ﺧﻠﻴﺔ‬
‫ﺏﺎﻳﺖ و‪ 2/1‬ﺝﻴﺠﺎ ﺏﺎﻳﺖ‬
‫ﺏﺎﻳﺖ و‪ 2/1‬ﺝﻴﺠﺎ ﺏﺎﻳﺖ‬
‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 8‬ﺝﻴﺠﺎ ﺏﺎﻳﺖ‬
‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 8‬ﺝﻴﺠﺎ ﺏﺎﻳﺖ‬
‫ﻡﺰدوﺝﺔ اﻟﻘ ﻨﺎة‪DDR2‬وﺣﺪة ذاآﺮة‬
‫ﻡﺰدوﺝﺔ اﻟﻘ ﻨﺎة‪DDR2‬وﺣﺪة ذاآﺮة‬
‫ﺳﻌﺎت ‪ 800 /667 / 533‬ﻡﻴﺠﺎ ﺏﺎﻳﺖ‪DDR2‬ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع‬
‫ﺳﻌﺎت ‪ 800 /667 / 533‬ﻡﻴﺠﺎ ﺏﺎﻳﺖ‪DDR2‬ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع‬
‫‪ ECC‬وﺗﻠﻚ اﻟﺘﻲﻻ ﺗﺘﻮاﻓﻖ ﻡﻊ‪DIMM‬ﻻ ﺗﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة‬
‫‪ ECC‬وﺗﻠﻚ اﻟﺘﻲﻻ ﺗﺘﻮاﻓﻖ ﻡﻊ‪DIMM‬ﻻ ﺗﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة‬
‫‪ITE 8716F‬‬
‫‪ITE 8716F‬‬
‫اﻷآﺜﺮ اﺳﺘﺨﺪاﻡًﺎ‪Super I/O .‬ﺗﻮﻓﺮ وﻇﻴﻔﺔ‬
‫اﻷآﺜﺮ اﺳﺘﺨﺪاﻡًﺎ‪Super I/O .‬ﺗﻮﻓﺮ وﻇﻴﻔﺔ‬
‫‪ Low Pin Count Interface‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫‪ Low Pin Count Interface‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ‪:‬‬
‫وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ‪:‬‬
‫ﻡﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣ ﺎﻟﺔ اﻷﺝﻬﺰة‬
‫ﻡﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣ ﺎﻟﺔ اﻷﺝﻬﺰة‬
‫ﻡﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣﺔ‬
‫ﻡﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣﺔ‬
‫‪ ITE‬ﻡﻦ"‪"Smart Guardian‬وﻇﻴﻔﺔ‬
‫‪ ITE‬ﻡﻦ"‪"Smart Guardian‬وﻇﻴﻔﺔ‬
‫ﻡﺘﻜﺎﻡﻞ‪IDE‬ﻡﺘﺤﻜﻢ‬
‫ﻡﺘﻜﺎﻡﻞ‪IDE‬ﻡﺘﺤﻜﻢ‬
‫‪Ultra DMA 33 / 66 / 100 / 133‬ﻥﺎﻗﻞ ﺏﺘﻘﻨﻴﺔ‬
‫‪Ultra DMA 33 / 66 / 100 / 133‬ﻥﺎﻗﻞ ﺏﺘﻘﻨﻴﺔ‬
‫وﺿﻊ رﺋﻴﺴﻲ‬
‫وﺿﻊ رﺋﻴﺴﻲ‬
‫‪PIO Mode 0~4‬دﻋﻢ وﺿﻊ‬
‫‪PIO Mode 0~4‬دﻋﻢ وﺿﻊ‬
‫ﻡﺘﻜﺎﻡﻞ‪Serial ATA‬ﻡﺘﺤﻜﻢ‬
‫ﻡﺘﻜﺎﻡﻞ‪Serial ATA‬ﻡﺘﺤﻜﻢ‬
‫ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺏﺴﺮﻋﺎت ﺗﺼﻞ إﻟﻰ ‪ 3‬ﺝﻴﺠﺎﺏﺖ‪ /‬ﺙﺎﻥﻴﺔ‪.‬‬
‫ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺏﺴﺮﻋﺎت ﺗﺼﻞ إﻟﻰ ‪ 3‬ﺝﻴﺠﺎﺏﺖ‪ /‬ﺙﺎﻥﻴﺔ‪.‬‬
‫‪ 2.0.‬اﻹﺹﺪار‪SATA‬ﻡﻄﺎﺏﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬
‫‪ 2.0.‬اﻹﺹﺪار‪ SATA‬ﻡﻄﺎﺏﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬
‫‪Marvell 88E8056 /‬‬
‫‪Marvell 88E8056 /‬‬
‫)اﺥﺘﻴﺎري(‪88E8039‬‬
‫)اﺥﺘﻴ ﺎري(‪88E8039‬‬
‫ﺗﻔﺎوض ﺗﻠﻘﺎﺋﻲ ‪ 100/10‬ﻡﻴﺠﺎ ﺏﺎﻳﺖ ‪ /‬ﺙﺎﻥﻴﺔ و‪1‬ﺝﻴﺠﺎ ﺏﺖ‪/‬ﺙﺎﻥﻴﺔ‬
‫ﺗﻔﺎوض ﺗﻠﻘﺎﺋﻲ ‪ 100/10‬ﻡﻴﺠﺎ ﺏﺎﻳﺖ ‪ /‬ﺙﺎﻥﻴﺔ و‪1‬ﺝﻴﺠﺎ ﺏﺖ‪/‬ﺙﺎﻥﻴﺔ‬
‫‪Marvell 88E8056‬اﻟﻨﻄﺎق اﻟﺘﺮددي ﻟﻠﺠﻴﺠﺎﺏﺖ ﻡﻘﺼﻮر ﻓﻘﻂ ﻋﻠﻰ‬
‫‪Marvell 88E8056‬اﻟﻨﻄﺎق اﻟﺘﺮددي ﻟﻠﺠﻴﺠﺎﺏﺖ ﻡﻘﺼﻮر ﻓﻘﻂ ﻋﻠﻰ‬
‫إﻡﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻡﻞ‪/‬اﻟﻨﺼﻔﻲ‬
‫إﻡﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻡﻞ‪/‬اﻟﻨﺼﻔﻲ‬
‫‪48‬‬
‫‪NF560-A2G/NF520-A 2G‬‬
‫‪NF560-A2G‬‬
‫آﻮدیﻚ اﻟﺼﻮت‬
‫‪NF520-A2G‬‬
‫)‪ALC888 (Ver 5.x) / ALC662 (Ver 6.x‬‬
‫)‪ALC888 (Ver 5.x) / ALC662 (Ver 6.x‬‬
‫ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‪(ALC888)7.1‬‬
‫ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‪(ALC888)7.1‬‬
‫ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‪(ALC662)5.1‬‬
‫ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‪(ALC662)5.1‬‬
‫‪ 7.1‬ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‬
‫‪ 5.1‬ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‬
‫ﻓﺘﺤﺔ ‪PCI‬‬
‫ﻋﺪد‪3‬‬
‫ﻓﺘﺤﺔ ‪PCI‬‬
‫ﻋﺪد‪3‬‬
‫ﻓﺘﺤﺔ ‪PCI Expressx16‬‬
‫ﻋﺪد ‪1‬‬
‫ﻓﺘﺤﺔ ‪PCI Expressx16‬‬
‫ﻋﺪد ‪1‬‬
‫ﻓﺘﺤﺔ‪PCI Express x 1‬‬
‫ﻋﺪد‪2‬‬
‫ﻓﺘﺤﺔ‪PCI Express x 1‬‬
‫ﻋﺪد‪2‬‬
‫ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﻃﺎﺏﻌﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﻃﺎﺏﻌﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ‪IDE‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ‪IDE‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ‪SATA‬‬
‫ﻋﺪد‪4‬‬
‫ﻡﻨﻔﺬ‪SATA‬‬
‫ﻋﺪد‪4‬‬
‫ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ‬
‫ﻋﺪد ‪1‬‬
‫اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺱﻄﺢ‬
‫ﻡﻨﻔﺬ‪CD-IN‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ‪CD-IN‬‬
‫ﻋﺪد ‪1‬‬
‫اﻟﻠﻮﺡﺔ‬
‫ﻡﻨﻔﺬ ﺥﺮج‪S/PDIF‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺥﺮج‪S/PDIF‬‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻡﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻡﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻡﺮوﺣﺔ اﻟﻨﻈﺎم‬
‫ﻋﺪد‪1‬‬
‫وﺹﻠﺔ ﻡﺮوﺣﺔ اﻟﻨﻈﺎم‬
‫ﻋﺪد‪1‬‬
‫وﺹﻠﺔ ﻡﺴﺢ‪CMOS‬‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻡﺴﺢ‪CMOS‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ‪USB‬‬
‫ﻋﺪد‪3‬‬
‫ﻡﻨﻔﺬ‪USB‬‬
‫ﻋﺪد‪3‬‬
‫ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺏﻮس(‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺏﻮس(‬
‫ﻋﺪد ‪1‬‬
‫اﻟﻔﺘﺤﺎت‬
‫ﻣﻨﺎﻓﺬ دﺧﻞ‪ /‬ﺧﺮج‬
‫اﻟﻠﻮﺡﺔ اﻟ ﺨﻠﻔﻴﺔ‬
‫ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪ 4‬دﺏﺎﺏﻴﺲ(‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺗﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪ 4‬دﺏﺎﺏﻴﺲ(‬
‫ﻋﺪد ‪1‬‬
‫ﻟﻮﺣﺔ ﻡﻔﺎﺗﻴﺢ‪PS/2‬‬
‫ﻋﺪد ‪1‬‬
‫ﻟﻮﺣﺔ ﻡﻔﺎﺗﻴﺢ‪PS/2‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﺎوس ‪PS/2‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﺎوس ‪PS/2‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺗﺴﻠﺴﻠﻲ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺗﺴﻠﺴﻠﻲ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺷﺒﻜﺔ اﺗﺼﺎل ﻡﺤﻠﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺷﺒﻜﺔ اﺗﺼﺎل ﻡﺤﻠﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﺎﻓﺬ ‪USB‬‬
‫ﻋﺪد ‪4‬‬
‫ﻡﻨﺎﻓﺬ ‪USB‬‬
‫ﻋﺪد ‪4‬‬
‫ﻡﻘﺒﺲ ﺹﻮت)‪(Ver 5.x‬‬
‫ﻋﺪد ‪6‬‬
‫ﻡﻘﺒ ﺲ ﺹﻮت)‪(Ver 5.x‬‬
‫ﻋﺪد ‪6‬‬
‫ﻡﻘﺒﺲ ﺹﻮت)‪(Ver 6.x‬‬
‫ﻋﺪد ‪3‬‬
‫ﻡﻘﺒﺲ ﺹﻮت)‪(Ver 6.x‬‬
‫ﻋﺪد ‪3‬‬
‫ﻣﺰایﺎ ﺧﺎﺹﺔ‬
‫‪ RAID 0 / 1 / 0+1 / 5‬ﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ‬
‫ﺡﺠﻢ اﻟﻠﻮﺡﺔ‬
‫دﻋﻢ أﻥﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ‬
‫‪49‬‬
‫‪ RAID 0 / 1 / 0+1‬ﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ‬
‫‪ 200‬ﻡﻢ )ﻋﺮض (‪ 293 X‬ﻡﻢ ) ارﺗﻔﺎع(‬
‫‪ 200‬ﻡﻢ )ﻋﺮض (‪ 293 X‬ﻡﻢ ) ارﺗﻔﺎع(‬
‫‪Windows 2000 / XP / VISTA‬‬
‫‪Windows 2000 / XP / VISTA‬‬
‫ﺏﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ﺗﺸﻐﻴﻞ ﺏﺈﺥﻄﺎر أو‪Biostar‬ﺗﺤﺘﻔﻆ‬
‫ﺏﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ﺗﺸﻐﻴﻞ ﺏﺈﺥﻄﺎر أو‪Biostar‬ﺗﺤﺘﻔﻆ‬
‫ﺏﺪون إﺥﻄﺎر‪.‬‬
‫ﺏﺪون إﺥﻄﺎر‪.‬‬
Motherboard Manual
JAPANESE
NF560-A2G
CPU
NF520-A2G
Socket AM2
Socket AM2
AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2/
AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2/
Sempron プロセッサ
Sempron プロセッサ
AMD 64アーキテクチャでは、32ビットと64ビット計 AMD 64アーキテクチャでは、32ビットと64ビット計
算が可能です
算が可能です
ハイパートランスポートとクールアンドクワイアット ハイパートランスポートとクールアンドクワイアット
をサポートします
FSB
をサポートします
1G のバンド幅までハイパートランスポートをサポー 1G のバンド幅までハイパートランスポートをサポー
トします
チップセット nVIDIA nForce 560
DDR2 DIMMスロット x 4
トします
nVIDIA nForce 520
DDR2 DIMMスロット x 4
各DIMMは 256/512MB & 1GB/2GB DDR2をサポ 各DIMMは 256/512MB & 1GB/2GB DDR2をサポ
ート
メインメモリ 最大メモリ容量8GB
デュアル チャンネルモードDDR2メモリモジュール
ート
最大メモリ容量8GB
デュアル チャンネルモードDDR2メモリモジュール
DDR2 533 / 667 / 800をサポート
DDR2 533 / 667 / 800をサポート
登録済みDIMMとECC DIMMはサポートされません
登録済みDIMMとECC DIMMはサポートされません
ITE 8716F
ITE 8716F
もっとも一般に使用されるレガシーSuper I/O機能を もっとも一般に使用されるレガシーSuper I/O機能を
Super I/O
IDE
SATA II
LAN
50
採用しています。
採用しています。
低ピンカウントインターフェイス
低ピンカウントインターフェイス
環境コントロールイニシアチブ、
環境コントロールイニシアチブ、
H/Wモニター
H/Wモニター
ファン速度コントローラ/ モニター
ファン速度コントローラ/ モニター
ITEの「スマートガーディアン」機能
ITEの「スマートガーディアン」機能
統合IDEコントローラ
統合IDEコントローラ
Ultra DMA 33 / 66 / 100 / 133バスマスタモード
Ultra DMA 33 / 66 / 100 / 133バスマスタモード
PIO Mode 0~4のサポート、
PIO Mode 0~4のサポート、
統合シリアルATAコントローラ
統合シリアルATAコントローラ
最高3 Gb/秒のデータ転送速度
最高3 Gb/秒のデータ転送速度
SATAバージョン2.0仕様に準拠。
SATAバージョン2.0仕様に準拠。
Marvell 88E8056 / 88E8039(オプション)
Marvell 88E8056 / 88E8039(オプション)
10 / 100 / 1000 Mb/秒のオートネゴシエーション
10 / 100 / 1000 Mb/秒のオートネゴシエーション
(Gigabitバンド幅はMarvell 88E8056専用です)
(Gigabitバンド幅はMarvell 88E8056専用です)
半/全二重機能
半/全二重機能
NF560-A2G/NF520-A 2G
NF560-A2G
NF520-A2G
ALC888 (Ver 5.x) / ALC662 (Ver 6.x)
ALC888 (Ver 5.x) / ALC662 (Ver 6.x)
サウンド
7.1チャンネルオーディオアウト (ALC888)
7.1チャンネルオーディオアウト (ALC888)
Codec
5.1チャンネルオーディオアウト (ALC662)
5.1チャンネルオーディオアウト (ALC662)
7.1 チャンネルオーディオアウト
5.1 チャンネルオーディオアウト
スロット
PCIスロット
x3
PCIスロット
x3
PCI Express x16スロット
x1
PCI Express x16スロット
x1
PCI Express x 1スロット
x2
PCI Express x 1スロット
x2
フロッピーコネクタ
x1
フロッピーコネクタ
x1
プリンタポートコネクタ
x1
プリンタポートコネクタ
x1
IDEコネクタ
x1
IDEコネクタ
x1
SATAコネクタ
x4
SATAコネクタ
x4
フロントパネルコネクタ
x1
フロントパネルコネクタ
x1
フロントオーディオコネクタ
x1
フロントオーディオコネクタ
x1
オンボードコ CDインコネクタ
ネクタ
背面パネル
I/O
x1
CDインコネクタ
x1
S/PDIFアウトコネクタ
x1
S/PDIFアウトコネクタ
x1
CPUファンヘッダ
x1
CPUファンヘッダ
x1
システムファンヘッダ
x1
システムファンヘッダ
x1
CMOSクリアヘッダ
x1
CMOSクリアヘッダ
x1
USBコネクタ
x3
USBコネクタ
x3
電源コネクタ(24ピン)
x1
電源コネクタ(24ピン)
x1
電源コネクタ(4ピン)
x1
電源コネクタ(4ピン)
x1
PS/2キーボード
x1
PS/2キーボード
x1
PS/2マウス
x1
PS/2マウス
x1
シリアルポート
x1
シリアルポート
x1
LANポート
x1
LANポート
x1
USBポート
x4
USBポート
x4
オーディオジャック(Ver 5.x)
x6
オーディオジャック(Ver 5.x)
x6
オーディオジャック(Ver 6.x)
x3
オーディオジャック(Ver 6.x)
x3
ボードサイズ 200 mm (幅) X 293 mm (高さ)
特殊機能
200 mm (幅) X 293 mm (高さ)
RAID 0 / 1 / 0+1 / 5のサポート
RAID 0 / 1 / 0+1のサポート
Windows 2000 / XP / VISTA
Windows 2000 / XP / VISTA
OSサポート Biostarは事前のサポートなしにOSサポートを追加ま Biostarは事前のサポートなしにOSサポートを追加ま
たは削除する権利を留保します。
たは削除する権利を留保します。
2007/06/28
51
NF560-A2G/NF520-A2G BIOS Setup
BIOS Setup ................................................................................................ 1
1 Main Menu ............................................................................................. 3
2 Standard CMOS Features..................................................................... 7
3Advanced BIOS Features ....................................................................... 9
4 Advanced Chipset Features................................................................. 16
5 Integrated Peripherals......................................................................... 18
6 Power Management Setup................................................................... 24
7 PnP/PCI Configurations...................................................................... 28
8 PC Health Status .................................................................................. 31
9 Performance Booster Zone.................................................................. 34
i
NF560-A2G/NF520-A2G
BIOS Setup
Introduction
The purpose of this manual is to describe the settings in the Phoenix-Award™
BIOS Setup program on this motherboard. The Setup program allows users to
modify the basic system configuration and save these settings to CMOS RAM.
The power of CMOS RAM is supplied by a battery so that it retains the Setup
information when the power is turned off.
Basic Input-Output System (BIOS) determines what a computer can do without
accessing programs from a disk. This system controls most of the input and
output devices such as keyboard, mouse, serial ports and disk drives. BIOS
activates at the first stage of the booting process, loading and executing the
operating system. Some additional features, such as virus and password
protection or chipset fine-tuning options are also included in BIOS.
The rest of this manual will to guide you through the options and settings in
BIOS Setup.
Plug and Play Support
This PHOENIX-AWARD BIOS supports the Plug and Play Version 1.0A
specification and ESCD (Extended System Configuration Data) write.
EPA Green PC Support
This PHOENIX-AWARD BIOS supports Version 1.03 of the EPA Green PC
specification.
APM Support
This PHOENIX-AWARD BIOS supports Version 1.1&1.2 of the Advanced
Power Management (APM) specification. Power management features are
implemented via the System Management Interrupt (SMI). Sleep and Suspend
power management modes are supported. Power to the hard disk drives and
video monitors can also be managed by this PHOENIX-AWARD BIOS.
1
NF560-A2G/NF520-A2G
ACPI Support
Phoenix-Award ACPI BIOS support Version 1.0b of Advanced Configuration
and Power interface specification (ACPI). It provides ASL code for power
management and device configuration capabilities as defined in the ACPI
specification, developed by Microsoft, Intel and Toshiba.
PCI Bus Support
This PHOENIX-AWARD BIOS also supports Version 3.0 of the Intel PCI
(Peripheral Component Interconnect) local bus specification.
DRAM Support
DDR2 SDRAM (Double Data Rate Synchronous DRAM) is supported.
Supported CPUs
This PHOENIX-AWARD BIOS supports the AMD CPU.
Using Setup
Use the arrow keys to highlight items in most of the place, press <Enter> to
select, use the <PgUp> and <PgDn> keys to change entries, press <F1> for help
and press <Esc> to quit. The following table provides more detail about how to
navigate in the Setup program by using the keyboard.
Keystroke
Up arrow
Down arrow
Left arrow
Right arrow
Move Enter
PgUp key
PgDn key
+ Key
- Key
Esc key
F1 key
F5 key
F7 key
F10 key
Function
Move to previous item
Move to next item
Move to the item on the left (menu bar)
Move to the item on the right (menu bar)
Move to the item you desired
Increase the numeric value or make changes
Decrease the numeric value or make changes
Increase the numeric value or make changes
Decrease the numeric value or make changes
Main Menu – Quit and not save changes into CMOS
Status Page Setup Menu and Option Page Setup Menu – E xit
Current page and return to Main Menu
General help on Setup navigation keys
Load previous values from CMOS
Load the optimized defaults
Save all the CMOS changes and exit
2
NF560-A2G/NF520-A2G
1 Main Menu
Once you enter Phoenix-Award BIOS™ CMOS Setup Utility, the Main Menu
will appear on the screen. The Main Menu allows you to select from several
setup functions. Use the arrow keys to select among the items and press <Enter>
to accept and enter the sub-menu.
!! WARNING !!
For better system performance, the BIOS firmware is being
continuously updated. The BIOS information described in
this manual (Figure 1, 2, 3, 4, 5, 6, 7, 8, 9) is for your
reference only. The actual BIOS information and settings on
board may be slightly different from this manual.
„ Figure 1: Main Menu
Standard CMOS Features
This submenu contains industry standard configurable options.
3
NF560-A2G/NF520-A2G
Advanced BIOS Features
This submenu allows you to configure advanced features of the BIOS.
Advanced Chipset Features
This submenu allows you to configure special chipset features.
Integrated Peripherals
This submenu allows you to configure certain IDE hard drive options and
Programmed Input/ Output features.
Power Management Setup
This submenu allows you to configure the power management features.
PnP/PCI Configurations
This submenu allows you to configure certain “Plug and Play” and PCI options.
PC Health Status
This submenu allows you to monitor the hardware of your system.
Performance Booster Zone
This submenu allows you to change CPU Vcore Voltage and CPU/PCI clock.
(However, we suggest you to use the default setting. Changing the voltage and
clock improperly may damage the CPU or M/B!)
Load Optimized Defaults
This selection allows you to reload the BIOS when problem occurs during
system booting sequence. These configurations are factory settings optimized
for this system. A confirmation message will be displayed before defaults are
set.
4
NF560-A2G/NF520-A2G
Set Supervisor Password
Setting the supervisor password will prohibit everyone except the supervisor
from making changes using the CMOS Setup Utility. You will be prompted with
to enter a password.
Set User Password
If the Supervisor Password is not set, then the User Password will function in
the same way as the Supervisor Password. If the Supervisor Password is set and
the User Password is set, the “User” will only be able to view configurations but
will not be able to change them.
Save & Exit Setup
Save all configuration changes to CMOS (memory) and exit setup. Confirmation
message will be displayed before proceeding.
Exit Without Saving
Abandon all changes made during the current session and exit setup.
Confirmation message will be displayed before proceeding.
5
NF560-A2G/NF520-A2G
Upgrade BIOS
This submenu allows you to upgrade bios.
6
NF560-A2G/NF520-A2G
2 Standard CMOS Features
The items in Standard CMOS Setup Menu are divided into several categories.
Each category includes no, one or more than one setup items. Use the arrow
keys to highlight the item and then use the<PgUp> or <PgDn> keys to select the
value you want in each item.
„ Figure 2: Standard CMOS Setup
Main Menu Selections
This table shows the items and the available options on the Main Menu.
Item
Options
Description
Date
mm : dd : yy
Set the system date. Note
that the ‘Day’ automatically
changes when you set the
date.
Time
hh : mm : ss
Set the system internal
clock.
IDE Channel 0/2/3
Master
Options are in its sub
menu.
Press <Enter> to enter the
sub menu of detailed
options
IDE Channel 0/2/3
Slave
Options are in its sub
menu.
Press <Enter> to enter the
sub menu of detailed
options.
7
NF560-A2G/NF520-A2G
Item
Options
Description
360K, 5.25 in
1.2M, 5.25 in
Drive A
720K, 3.5 in
1.44M, 3.5 in
Select the type of floppy
disk drive installed in your
system.
2.88M, 3.5 in
None
All Errors
No Errors
Halt On
All, but Keyboard
All, but Diskette
Select the situation in which
you want the BIOS to stop
the POST process and
notify you.
All, but Disk/ Key
Base Memory
N/A
Displays the amount of
conventional memory
detected during boot up.
Extended Memory
N/A
Displays the amount of
extended memory detected
during boot up.
Total Memory
N/A
Displays the total memory
available in the system.
8
NF560-A2G/NF520-A2G
3Advanced BIOS Features
„ Figure 3: Advanced BIOS Setup
Cache Setup
9
NF560-A2G/NF520-A2G
CPU Internal Cache
Depending on the CPU/chipset in use, you may be able to increase memory
access time with this option.
Enabled (default) Enable cache.
Disabled
Disable cache.
External Cache
This option enables or disables “Level 2” secondary cache on the CPU, which
may improve performance.
Enabled (default) Enable cache.
Disabled
Disable cache.
Boot Seq & Floppy Setup
This item allows you to setup boot sequence & Floppy.
10
NF560-A2G/NF520-A2G
Removable Device Priority
Select Removable Boot Device Priority.
The Choices: Floppy Disks, Zip100, USB-FDD0, USB-FDD1, USB-ZIP0,
USB-ZIP1, LS120.
Hard Disk Boot Priority
The BIOS will attempt to arrange the Hard Disk boot sequence automatically.
You can change the Hard Disk booting sequence here.
The Choices: Pri. Master, Pri. Slave, Sec. Master, Sec. Slave, USB HDD0, USB
HDD1, USB HDD2, and Bootable Add-in Cards.
11
NF560-A2G/NF520-A2G
CD-ROM Boot Priority
The Choices: Pri. Master, Pri. Slave, Sec. Master, Sec. Slave, USB CDROM0,
USB CDROM 1.
First/Second/Third Boot Device
The BIOS will attempt to load the operating system in this order.
The Choices: Removable, Hard Disk, CDROM, Legacy LAN, Disabled.
Boot Other Device
When enabled, BIOS will try to load the operating system from other device
when it failed to load from the three devices above.
The Choices: Enabled (default), Disabled
Boot Up Floppy Seek
When enabled, System will test the floppy drives to determine if they have 40
or 80 tracks during boot up. Disabling this option reduces the time it takes to
boot-up.
The Choices: Enabled (default), Disabled.
12
NF560-A2G/NF520-A2G
CPU Feature
AMD K8 Cool&Quiet control
The item allows you select K8 Cool’n’Quiet control.
The Choices: Auto (default), Disabled.
Virus Warning
This option allows you to choose the VIRUS Warning feature that is used to
protect the IDE Hard Disk boot sector. If this function is enabled and an attempt
is made to write to the boot sector, BIOS will display a warning message on the
screen and sound an alarm beep.
Disabled (default) Virus protection is disabled.
Enabled
Virus protection is activated.
Quick Power On Self Test
Enabling this option will cause an abridged version of the Power On Self-Test
(POST) to execute after you power up the computer.
Disabled
Normal POST.
Enabled (default) Enable quick POST.
13
NF560-A2G/NF520-A2G
Boot Up NumLock Status
Selects the NumLock State after the system switched on.
The Choices:
On (default)
Numpad is number keys.
Off
Numpad is arrow keys.
Gate A20 Option
Select if chipset or keyboard controller should control Gate A20.
Normal
A pin in the keyboard controller controls GateA20.
Fast (default)
Lets chipset control Gate A20.
Typematic Rate Setting
When a key is held down, the keystroke will repeat at a rate determined by the
keyboard controller. When enabled, the typematic rate and typematic delay can
be configured.
The Choices: Disabled (default), Enabled.
Typematic Rate (Chars/Sec)
Sets the rate at which a keystroke is repeated when you hold the key down.
The Choices: 6 (default), 8, 10, 12, 15, 20, 24, 30.
Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins to repeat the
keystroke.
The Choices: 250 (default), 500, 750, 1000.
Security Option
This option will enable only individuals with passwords to bring the system
online and/or to use the CMOS Setup Utility.
System:
A password is required for the system to boot and is also
required to access the Setup Utility.
Setup (default):
A password is required to access the Setup Utility only.
This will only apply if passwords are set from the Setup main menu.
14
NF560-A2G/NF520-A2G
APIC MODE
Selecting Enabled enables APIC device mode reporting from the BIOS to the
operating system.
The Choices: Enabled (default), Disabled.
MPS Version Control For OS
The BIOS supports version 1.1 and 1.4 of the Intel multiprocessor specification.
Select version supported by the operation system running on this computer.
The Choices: 1.4 (default), 1.1.
OS Select For DRAM > 64MB
A choice other than Non-OS2 is only used for OS2 systems with memory
exceeding 64MB.
The Choices: Non-OS2 (default), OS2.
Small Logo(EPA) Show
This item allows you to select whether the “Small Logo” shows. Enabled
(default) “Small Logo” shows when system boots up. Disabled No “Small
Logo” shows when system boots
The Choices: Enabled (default), Disabled.
Summary Screen Show
This item allows you to enable/disable the summary screen. Summary screen
means system configuration and PCI device listing.
The Choices: Disabled (default), Enabled.
15
NF560-A2G/NF520-A2G
4 Advanced Chipset Features
„
This submenu allows you to configure the specific features of the chipset
installed on your system. This chipset manage bus speeds and access to system
memory resources, such as DRAM. It also coordinates communications with the
PCI bus. The default settings that came with your system have been optimized
and therefore should not be changed unless you are suspicious that the settings
have been changed incorrectly.
Figure 4: Advanced Chipset Setup
SATA Spread Spectrum
This item allows you to enable/disable the Spread Spectrum function.
The Choices: Disabled (default), Enabled.
SSE/SSE2 instructions
This item allows you to enable/disable SSE/SSE2 instruction.
The Choices: Enabled (default), Disabled.
16
NF560-A2G/NF520-A2G
System BIOS Cacheable
Selecting the “Enabled” option allows caching of the system BIOS ROM at
F0000h-FFFFFh, which is able to improve the system performance. However,
any programs that attempts to write to this memory block will cause conflicts
and result in system errors.
The Choices: Disabled (default), Enabled.
17
NF560-A2G/NF520-A2G
5 Integrated Peripherals
„ Figure 5. Integrated Peripherals
IDE Function Setup
Highlight the “Press Enter” label next to the “IDE Function Setup” label and
press enter key will take you a submenu with the following options:
18
NF560-A2G/NF520-A2G
MCP Storage Config
SATA Operation Mode
This option allows you to choose SATA function.
The Choices: IDE (default), RAID, AHCI.
SATA Pri-/Sec- Master/Slave RAID
This option allows you to enable or disable SATA Primary/Secondary RAID.
The Choices: Disabled (default), Enabled.
On-chip IDE Channel 0
The motherboard chipset contains a PCI IDE interface with support for two
IDE channels. Select “Enabled” to activate the first and/or second IDE interface.
Select “Disabled” to deactivate an interface if you are going to install a primary
and/or secondary add-in IDE interface.
The Choices: Enabled (default), Disabled.
Primary Master/Slave PIO
The IDE PIO (Programmed Input / Output) fields let you set a PIO mode (0-4)
for each of the IDE devices that the onboard IDE interface supports. Modes 0
to 4 will increase performance progressively. In Auto mode, the system
automatically determines the best mode for each device.
The Choices: Auto (default), Mode0, Mode1, Mode2, Mode3, Mode4.
19
NF560-A2G/NF520-A2G
Primary Master/Slave UDMA
Ultra DMA function can be implemented if it is supported by the IDE hard
drives in your system. As well, your operating environment requires a DMA
driver (Windows 95 or OSR2may need a third party IDE bus master driver). If
your hard drive and your system software both support Ultra DMA, select Auto
to enable BIOS support.
The Choices: Auto (default), Disabled.
IDE DMA Transfer Access
This item allows you to enable or disable the IDE DMA transfer access.
The Choices: Enabled (default), Disabled.
Serial-AT A Controller
This item allows you to enable or disable the Serial ATA function.
The Choices: Enabled (default), Disabled.
IDE Prefetch Mode
The “onboard” IDE drive interfaces supports IDE prefetch function for faster
drive access. If the interface on your drive does not support prefetching, or if
you install a primary and/or secondary add-in IDE interface, set this option to
“Disabled”.
The Choices: Enabled (default), Disabled.
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple
sectors read / write. If your IDE hard drive supports block mode (most new
drives do), select Enabled for automatic detection of the optimal number of
block mode (most new drives do), select Enabled for automatic detection of the
optimal number of block read / write per sector where the drive can support.
The Choices: Enabled (default), Disabled.
20
NF560-A2G/NF520-A2G
Onboard Device
Highlight the “Press Enter” label next to the “Onboard Device” label and press
the enter key will take you a submenu with the following options:
OnChip USB
This option should be enabled if your system has a USB installed on the system
board. You may need to disable this feature if you add a higher performance
controller.
The Choices: V1.1+V2.0 (default), Disabled, V1.1
USB Memory Type
This option allows you to choose the USB memory type.
The Choices: SHADOW (default), Base Memory(640K).
USB Keyboard/Mouse Support
This item allows you to enable or disable the USB Keyboard / Mouse Legacy
Support.
Enabled
Enable USB Keyboard / Mouse Support.
Disabled (default) Disable USB Keyboard/ Mouse Support.
21
NF560-A2G/NF520-A2G
USB Storage Support
This item allows you to enable or disable the USB Storage device Legacy
Support.
Enabled (default) Enable USB Storage Support.
Disabled
Disable USB Storage Support.
HD Audio
This option allows you to control the onboard HD audio.
The Choices: Auto (default), Disabled.
Onboard LAN
This option allows you to control the onboard LAN.
The Choices: Enabled (default), Disabled.
Onboard LAN Boot ROM
This item allows you to enable or disable the Onboard LAN Boot ROM.
The Choices: Disabled (default), Enabled.
SuperIO Device
Press Enter to configure the Super I/O device.
22
NF560-A2G/NF520-A2G
Onboard FDC Controller
Select enabled if your system has a floppy disk controller (FDC) installed on
the system board and you wish to use it. If you installed another FDC or the
system uses no floppy drive, select disabled in this field.
The Choices: Enabled (default), Disabled.
Onboard Serial Port 1
Select an address and corresponding interrupt for the first and second serial
ports.
The Choices: 3F8/IRQ4 (default), Disabled, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3,
Auto.
Onboard Parallel Port
This item allows you to determine access onboard parallel port controller with
which I/O Address.
The Choices: 378/IRQ7 (default), 278/IRQ5, 3BC/IRQ7, Disabled.
Parallel Port Mode
This item allows you to determine how the parallel port should function. The
default value is SPP.
The Choices:
SPP (default)
Using Parallel port as Standard Printer Port.
EPP
Using Parallel Port as Enhanced Parallel Port.
ECP
Using Parallel port as Extended Capabilities Port.
ECP+EPP
Using Parallel port as ECP & EPP mode.
ECP Mode Use DMA
Select a DMA Channel for the port.
The Choices: 3 (default), 1.
23
NF560-A2G/NF520-A2G
6 Power Management Setup
The Power Management Setup Menu allows you to configure your system to
utilize energy conservation and power up/power down features.
„ Figure 6. Power Management Setup
ACPI Function
This item displays the status of the Advanced Configuration and Power
Management (ACPI).
The Choices: Enabled (default), Disabled.
ACPI Suspend Type
The item allows you to select the suspend type under the ACPI operating
system.
The Choices:
S1 (POS) (default) Power on Suspend
S3 (STR) Suspend to RAM
S1 & S3 POS+STR
24
NF560-A2G/NF520-A2G
Power Management
This category allows you to select the power saving method and is directly
related to the following modes:
1. HDD Power Down.
2. Suspend Mode.
There are three options of Power Management, three of which have fixed mode
settings
Min. Power Saving
Minimum power management.
Suspend Mode = 1 hr.
HDD Power Down = 15 min
Max. Power Saving
Maximum power management only available for sl CPU’s.
Suspend Mode = 1 min.
HDD Power Down = 1 min.
User Define (default)
Allow you to set each option individually.
When you choose user define, you can adjust each of the item from 1 min. to 1
hr. except for HDD Power Down which ranges from 1 min. to 15 min.
Video Off Method
This option determines the manner when the monitor goes blank.
V/H SYNC+Blank
This selection will cause the system to turn off the vertical and horizontal
synchronization ports and write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS Support (default)
Initial display power management signaling.
HDD Power Down
When enabled, the hard-disk drives will power down after a set time of system
inactivity. All other devices remain active.
The Choices: Disabled (default), 1 Min, 2 Min, 3 Min, 4 Min, 5 Min, 6 Min, 7
Min, 8 Min, 9 Min, 10 Min, 11 Min, 12 Min, 13 Min, 14 Min, 15Min.
25
NF560-A2G/NF520-A2G
Soft-Off by PBTN
This item determines the behavior of system power button. Instant off turn off
the power immediately, and Delay 4 Sec. will require you to press and hold the
power button for 4 seconds to cut off the system power.
The Choices: Delay 4 Sec, Instant-Off (default).
WOL(PME#)/ From Soft-Off
This item allows you to enable or disable Wake On LAN from Soft-Off
function.
The Choices: Disabled (default), Enabled.
WOR(RI#) From Soft-Off
This item allows you to enable or disable Wake On Ring from Soft-Off function.
The Choices: Disabled (default), Enabled.
USB Resume From S3/S4
This item allows you to enable or disabled the USB resume from S3/S4
function.
The Choices: Disabled (default), Enabled.
Power-On by Alarm
This function is for setting date and time for your computer to boot up. When
enabled, you can choose the date and time to boot up the system.
The Choices: Disabled (default), Enabled.
Date (of Month) Alarm
You can choose which month the system will boot up.
Time (hh:mm:ss) Alarm
You can choose the system boot up time, input hour, minute and second to
specify.
Note: If you have change the setting, you must let the system boot up until it
goes to the operating system, before this function will work.
26
NF560-A2G/NF520-A2G
HPET Support
This option allows you to disabled or enables the High Precision Event Timer.
The Choices: Enabled (default), Disabled.
POWER ON Function`
This item allows you to choose the power on method.
The Choices: Button Only(default), Password, Hot Key, Mouse Move/Click,
Mouse Double Click, Any Key, Keyboard 98.
KB Power ON Password
Input password and press Enter to set the Keyboard power on password.
Hot Key Power ON
Choose the Hot Key combination to boot up the system.
The Choices: Ctrl-F1(default), Ctrl-F2, Ctrl-F3, Ctrl-F4, Ctrl-F5, Ctrl-F6,
Ctrl-F7, Ctrl-F8, Ctrl-F9, Ctrl-F10, Ctrl-F11, and Ctrl-F12.
PWRON After PWR-Fail
This setting specifies how your system should behave after a power fail or
interrupts occurs. By choosing off will leave the computer in the power off state.
Choosing On will reboot the computer. Former-Sts will restore the system to the
status before power failure or interrupt occurs.
The Choices: Off (default), On, Former-Sts.
27
NF560-A2G/NF520-A2G
7 PnP/PCI Configurations
This section describes configuring the PCI bus system. PCI, or Personal
Computer Interconnect, is a system which allows I/O devices to operate at
speeds nearing the speed of the CPU itself uses when communicating with its
own special components. This section covers some very technical items and it is
strongly recommended that only experienced users should make any changes to
the default settings.
„
Figure 7: PnP/PCI Configurations
Init Display First
This item allows you to decide to active whether PCI Slot or on-chip VGA first.
The Choices: PCI Slot, PCIEx (default).
28
NF560-A2G/NF520-A2G
Reset Configuration Data
The system BIOS supports the PnP feature which requires the system to record
which resources are assigned and protects resources from conflict.
Every peripheral device has a node, which is called ESCD. This node records
which resources are assigned to it. The system needs to record and update ESCD
to the memory locations. These locations are reserved in the system BIOS. If the
Disabled (default) option is chosen, the system‘s ESCD will update only when
the new configuration varies from the last one. If the Enabled option is chosen,
the system is forced to update ESCDs and then is automatically set to the
“Disabled” mode.
The above settings will be shown on the screen only if “Manual” is chosen for
the resources controlled by function.
Legacy is the term, which signifies that a resource is assigned to the ISA Bus
and provides non-PnP ISA add-on cards. PCI / ISA PnP signify that a resource
is assigned to the PCI Bus or provides for ISA PnP add-on cards and
peripherals.
The Choices: Disabled (default), Enabled.
Resources Controlled By
By Choosing “Auto(ESCD)” (default), the system BIOS will detect the system
resources and automatically assign the relative IRQ and DMA channel for each
peripheral. By Choosing “Manual”, the user will need to assign IRQ & DMA for
add-on cards. Be sure that there are no IRQ/DMA and I/O port conflicts.
The Choices: Auto (ESCD) (default), Manual.
IRQ Resources
This submenu will allow you to assign each system interrupt a type, depending
on the type of device using the interrupt. When you press the “Press Enter” tag,
you will be directed to a submenu that will allow you to configure the system
interrupts. This is only configurable when “Resources Controlled By” is set to
“Manual”.
IRQ-5
assigned to PCI Device
IRQ-7
assigned to PCI Device
IRQ-9
assigned to PCI Device
IRQ-10
assigned to PCI Device
IRQ-11
assigned to PCI Device
IRQ-14
assigned to PCI Device
29
NF560-A2G/NF520-A2G
PCI / VGA Palette Snoop
Some old graphic controllers need to “snoop” on the VGA palette and then map
it to their display as a way to provide boot information and VGA compatibility.
This item allows such snooping to take place.
The Choices: Disabled (default), Enabled
Maximum Payload Size
Set the maximum payload size for Transaction packets (TLP).
The Choice: 4096 (default.), 128, 256, 512, 1024, 2048.
30
NF560-A2G/NF520-A2G
8 PC Health Status
„ Figure 8: PC Health Status
Fan Control Setup
31
NF560-A2G/NF520-A2G
CPU FAN Control By
The Choice “smart” can make your CPU FAN to reduce noise.
The Choices: Always ON (default), Smart.
CPU Fan Off<℃>
If the CPU Temperature is lower than the set value, FAN will turn off.
The Choices: Min=0,.Max=20, Key in a DEC number.
CPU Fan Start<℃>
CPU fan starts to work under smart fan function when arrive this set
value.
The Choices: Min=0,.Max=50, Key in a DEC number.
CPU Fan Full speed <℃>
When CPU temperature is reach the set value, the CPU fan will work
under Full Speed.
The Choices: Min=0,.Max=80, Key in a DEC number.
Start PWM Value
When CPU temperature arrives to the set value, the CPU fan will work
under Smart Fan Function mode. The range is from 0~127, with an
interval of 1.
The Choices: Min=0,.Max=127, Key in a DEC number.
Shutdown Temperature
This item allows you to set up the CPU shutdown Temperature. This item is
only effective under Windows 98 ACPI mode.
The Choices: Disabled , 60℃/ 140℉, 65℃/ 149℉, 70℃/ 158℉, 75℃/ 167℉,
80℃/ 176℉(default), 85℃/ 185℉, 90℃/ 194℉.
Show H/W Monitor in POST
If you computer contains a monitoring system, it will show PC health status
during POST stage. The item offers several different delay times.
The Choices: Enabled (default), Disabled.
32
NF560-A2G/NF520-A2G
CPU Vcore, Chipset Voltage, +3.3V, +5.0V, +12.0V, DDR
Voltage, HT Voltage, 5V<SB>, Voltage Battery
Detect the system’s voltage status automatically.
CPU Temperature
This field displays the current temperature of CPU.
CPU FAN Speed
This field displays the current speed of CPU fan.
SYS FAN Speed
This field displays the current speed SYSTEM fan.
33
NF560-A2G/NF520-A2G
9 Performance Booster Zone
DRAM Configuration
34
NF560-A2G/NF520-A2G
Timing Mode
This item allows you to choose to manually or automatically regulate the DDR
Timing.
The Choices: Auto (default), MaxMemClk.
Memory Clock Value OR Limi
The Choices: DDR 400 (default), DDR 533, DDR 667, DDR 800.
DQS Training Control
The Choices: Perform DQS, Skip DQS (default).
CKE base power down mode
The Choices: Disabled (default), Enabled.
CKE based power down
The Choices: Per Channel (default), Per CS.
Memclock tri-stating
The Choices: Disabled (default), Enabled.
Memory Hole Remapping
The Choices: Enabled (default), Disabled.
Auto Optimize Bottom IO
The Choices: Enabled (default), Disabled.
Bottom of [31:24] IO space
The Choices: C0 (default); Min=0000, Max=00FF, key in a HEX number.
CAS Latency
The CAS Latency (tCL) is the time (in number of clock cycles) that elapses
after the memory controller sends a request to read a memory location and
before the data is sent to the module's output pins.
The Choices: Auto (default), 2.0, 3.0, 4.0, 5.0, 6.0.
DRAM Command Mode
This item allows you to choose the DRAM command mode.
The Choices: Auto (default), 1T, 2T.
35
NF560-A2G/NF520-A2G
DDRII Timing Item
The Choices: Disabled (default), Enabled.
TwTr Command Delay
The Choices: 3 bus clocks (default), 1 bus clocks, 2 bus clocks.
Trfc0 for DIMM0
The Choices: 75ns (default), 105ns, 127.5ns, 195ns, 327.5ns.
Trfc1 for DIMM1
The Choices: 75ns (default) , 105ns, 127.5ns, 195ns, 327.5ns.
Trfc2 for DIMM2
The Choices: 75ns (default) , 105ns, 127.5ns, 195ns, 327.5ns.
Trfc3 for DIMM3
The Choices: 75ns (default) , 105ns, 127.5ns, 195ns, 327.5ns.
<Twr> Write Recovery Time
The Choices: 6 bus clocks (default), 3 bus clocks, 4 bus clocks, 5 bus clocks.
<Trtp> Precharge Time
The Choices: 3 clocks (default), 2 clocks.
<Trc> Row Cycle Time
The Choices: 26 bus clocks (default), 11-25 bus clocks.
<Trcd> RAS to CAS R/W Delay
The Choices: 6 clocks (default), 3 clocks, 4 clocks, 5 clocks.
<Trrd> RAS to RAS Delay
The Choices: 5 clocks (default), 2 clocks, 3 clocks, 4 clocks.
<Trp> Row Precharge Time
The Choices: 6 clocks (default), 3 clocks, 4 clocks, 5 clocks.
<Tras> Minimum RAS Active Time
The Choices: 18 bus clocks (default), 5-17 bus clocks.
36
NF560-A2G/NF520-A2G
CPU Frequency
This item allows you to select the CPU Frequency.
The Choices: 200 (default), 201~450.
K8<->NB HT Speed
The Choices: AUTO (default), 1x, 2x, 3x, 4x, 5x.
K8<->NB HT Width
The Choices: AUTO (default), ↓8↑8, ↓16↑16.
PCIE Spread Spectrum
This item allows you to select the PCIE Spread Spectrum function.
The Choices: Disabled (default), Enabled.
HT Spread Spectrum
This item allows you to select HT Spread Spectrum function.
The Choices: Disabled (default), Center, Down.
PCIE Clock
This item allows you to select the PCIE clock.
The Choices: 100Mhz (default), 101Mhz~150Mhz.
NPT Fid control
This function allows you to adjust the frequency ratio of CPU.
The Choices: Auto (default), x4: 800Mhz ~ x25: 5000Mhz
(differs from CPU)
NPT Vid Control
This function allows you to adjust the CPU voltage.
The Choices: Auto (default), 0.4625v ~ 1.7000v.
Memory Voltage
This function allows you to adjust the DDR voltage.
The Choices: Auto (default), 1.95V, 2.00V, 2.05V, 2.10V.
37