Classe Audio CD-DVD-1 User guide

Model DV7001 User Guide
Super Audio CD/DVD Player
CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
CONGRATULATIONS ON YOUR PURCHASE OF THIS
FINE MARANTZ PRODUCT.
MARANTZ is on the leading edge of DVD research for
consumer products and this unit incorporates the latest
technological developments.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
We are sure you will be fully satisfied with the DVD player.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Thank you for your support.
Please read through these operating instructions so you
will know how to operate your model properly. After you
have finished reading the instructions, put them away in
a safe place for future reference.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
The lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the presence of uninsulated "dangerous voltage"
within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock
to persons.
Copy protection
Many DVD discs are encoded with copy protection. Because
of this, you should only connect your DVD player directly to
your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs.
This product incorporates copyright protection technology that is protected by methods claims of certain U.S.
patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be
authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Operating Environment
Operating environment temperature and humidity:
+5°C to +35°C (+41°F to +95°F); less than 85%RH
(cooling vents not blocked)
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
product.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION:
POUR ÉVITER LES CHOCS ÉLECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS
LA BORNE CORRESPON-DANTE DE LA PRISE ET POUSSER
JUSQU’AU FOND.
LASER SAFETY
This unit employs a laser. Only a qualified service person should remove
the cover or attempt to service this device, due to possible eye injury.
CAUTION :
Do not install in the following locations
÷ Location exposed to direct sunlight or strong artificial
light
÷ Location exposed to high humidity, or poorly ventilated
location
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURE OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
CAUTION
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID
EXPOSURE TO BEAM (WARNING LOCATION: INSIDE ON LASER
COVERSHIELD)
NOTE:
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate the equipment.
2
Additional Safety Information!
1)
2)
3)
4)
5)
6)
7)
•
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings, Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience
receptacles, and the point where
they exit from the apparatus.
•
•
This product should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is
provided or the manufacturer’s instructions have been
adhered to.
Apparatus shall not be exposed to dripping or splashing
and that no objects filled with liquids, such as vases,
shall be placed on the apparatus.
When the switch is in the OFF position, the apparatus
isn’t completely switched-off from the MAINS.
English
Important Safety Instructions
11) Only use attachments/accessories
specified by the manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart
is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
3
FCC NOTE (for U. S. A only):
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
- Make a space of about 0.1 meter around the
unit.
- No objects filled with liquids, such as vases,
shall be placed on the equipment.
- When the switch is in the OFF position, the
equipment is not completely switched off from
MAINS.
- The equipment shall be installed near the
power supply so that the power supply is
easily accessible.
WARRANTY
For warranty information, contact your local Marantz distributor.
RETAIN YOUR PURCHASE RECEIPT
Your purchase receipt is your permanent record of a valuable purchase. It should be kept in a safe place to be referred
to as necessary for insurance purposes of when corresponding with Marantz.
NOTE: Changes or modifications may cause
this unit to fail to comply with Part 15 of the
FCC Rules and may void the user’s authority to
operate the equipment.
IMPORTANT
This Class B digital apparatus complies with
Canadian ICES-003.
FOR U.K. ONLY
Cet appareil numérique de la Classe B est
conforme á la norme NMB-003 du Canada.
This product satisfies FCC regulations when shielded cables
and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric
appliances, such as radios and televisions, use shielded
cables and connectors for connections.
When seeking warranty service, it is the responsibility of the
consumer to establish proof and date of purchase. Your purchase receipt or invoice is adequate for such proof.
This undertaking is in addition to a consumer’s statutory
rights and does not affect those rights in any way.
Disc Storage
Be careful not to harm the disc because the data on these
discs is highly vulnerable to the environment.
• Do not keep under direct sunlight.
• Keep in a cool ventilated area.
• Store vertically.
• Keep in a clean protection jacket.
Maintenance of Cabinet
CE marking (for Europe only)
This product is in conformity with the
EMC directive and low-voltage directive.
WARNINGS
- Do not expose the equipment to rain or moisture.
- Do not remove the cover from the equipment.
- Do not insert anything into the equipment
through the ventilation holes.
- Do not handle the mains cord with wet hands.
- Do not cover the ventilation with any items
such as tablecloths, newspapers, curtains, etc.
- No naked flame sources, such as lighted candles, should be placed on the equipment.
- When disposing of used batteries, please
comply with governmental regulations or environmental public instruction’s rules that apply
in your country or area.
4
For safety reasons, be sure to disconnect the AC power cord
from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
A NOTE ABOUT RECYCLING
This product’s packaging materials are
re cy cla ble and can be reused. This prod uct
and the accessories packed together are the
applicable product to the WEEE directive except
batteries.
Please dispose of any materials in accordance
with your local recycling regulations.
When discarding the unit, comply with your local
rules or regulations.
Batteries should never be thrown away or
incinerated but disposed of in accordance with
your local regulations con cern ing chemical
wastes.
1 Before You Start
Features.......................................................................................6
What’s in the box......................................................................7
Putting the batteries in the remote control ........................7
Using the remote control .......................................................7
Discs compatible with this player .........................................8
DVD-Video regions...................................................................9
General information .................................................................9
MP3 compatibility information .............................................9
WMA compatibility information............................................9
JPEG compatibility information .............................................9
DivX compatibility information .............................................9
2 Connecting Up
Easy setup ................................................................................10
Home theater video connections ....................................... 11
Home theater audio connections .......................................12
3 Controls & Displays
6 DVD Setup Menu
Using the FL menu................................................................. 34
Setting up the GENERAL SETUP page.............................. 36
Setting up the AUDIO SETUP page .................................. 39
Setting up the VIDEO SETUP page................................... 44
Setting up the PREFERENCE page..................................... 50
English
Table Of Contents
7 Additional Information
Language Codes .................................................................... 54
Handling discs........................................................................ 55
Storing discs ........................................................................... 55
Discs to avoid ......................................................................... 55
Cleaning the pickup lens...................................................... 55
Problems with condensation............................................... 55
Hints on installation.............................................................. 56
Moving the player.................................................................. 56
Precautions on using the power cord ............................... 56
Troubleshooting..................................................................... 57
Specifications ......................................................................... 60
Front panel...............................................................................13
Remote control .......................................................................14
4 Getting Started
Playing discs ............................................................................16
Basic playback controls.........................................................16
Resuming playback from the last stopped point.............16
Navigating DVD disc menus .................................................17
Navigating Video CD PBC menus .......................................17
5 Playing Discs
Introduction.............................................................................18
Preview function......................................................................18
Fast Forward/Fast Reversed ................................................. 20
Still Frame/Slow Play/Frame Advance Playback...............21
Using the page....................................................................... 22
Using the Repeat Play .......................................................... 22
Looping a section of a disc ................................................. 23
Using the Random (SHUFFLE) Play................................... 23
Switching Camera Angles..................................................... 24
Switching the Subtitle Language ....................................... 24
Switching the Audio Language ......................................... 25
Switching the audio channel............................................... 25
Switching Super Audio CD Playback layer....................... 25
Switching Super Audio CD Playback area........................ 25
Using the Zoom Function.................................................... 25
Play back Information........................................................... 26
Playing an MP3/DivX/JPEG/Windows Media™
Audio disc ............................................................................... 29
Playing a JPEG image file (slide show) .............................. 30
Playing MP3/WMA music and JPEG pictures
simultaneously.........................................................................31
Playing a DivX disc................................................................ 32
Using the Setup Menu ......................................................... 33
5
1
Before You Start
Features
1
An HDCP-compatible HDMI*
terminal is provided for fully digital
transmission that ensures the very
highest picture and digital sound
quality.
This unit comes with a High-Definition
Multimedia Interface (HDMI) jack; an
extended DVI interface for next-generation
televisions. This interface allows transfers
of uncompressed digital video and digital
audio (audio streams such as Dolby Digital
and DTS as well as linear PCM) with a
single connector. HDMI standard Ver. 1.1
compatibility means the unit can also
transfer DVD-Audio multi-channel audio
over HDMI.
End-to-end full-digital transfers with all
digital processing allow the enjoyment
of realistic video without any image
degradation caused by AD/DA conversions.
And the unit can up-convert 480p video
signals to 720p, 1080i, and 1080p video
output signals using the scaling function
and the HDMI jack (see pages 11, 47).
High quality 12-bit/216 MHz Video
D/A converter*2
The unit uses a Video D/A converter that
performs D/A conversion of all video
signals in 12-bits and can perform 8x oversampling to let you enjoy beautiful video
possible with DVD. Furthermore, NSV
technology suppresses noise during DA
conversion.
DCDi
*3
DCDi (Directional Correction
Deinterlacing) computes and tracks the
angle of the screen edge to fill in the
missing pixels on the TV screen. DCDi
significantly optimizes the image quality,
especially during slow motion playback.
This function is available only for
progressive scan output.
High quality 24-bit/192 kHz DAC
The high specification 24-bit/192 kHz DAC
delivers dynamic, smooth and expansive
analog sound from CDs and DVDs.
6
Superlative audio performance with
Super Audio CD, DVD-Audio, Dolby*4
Digital and DTS*5 software
Logos:
The DV7001 delivers breathtaking sound
quality with Super Audio CD, DVD-Audio,
Dolby Digital and DTS discs.
DivX
*6
You can enjoy DivX® files which are
recorded on DVD±R/RW or CD-R/RW.
Plays DivX5.2, DivX4, DivX3 and DivX
VOD Video content (see pages 29, 32).
• This player supports Quarter Pixel.
• This player supports GMC.
MP3 and WMA*7
compatibility
This player is compatible with CD-R, CDRW and CD-ROM discs that contain MP3
and WMA audio tracks (see pages 29, 31).
JPEG compatibility
This player is compatible with CD-R, CDRW and CD-ROM discs that contain JPEG
data (see pages 29, 30, 31).
*1 HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
*2 “NSV” is a registered trademark of Analog Device
Co. Ltd.
*3 “DCDi” is a registered trademark of Faroudja, a
division of Genesis Microchip, Inc.
*4 Manufactured under license from Dolby
Laboratories. “Dolby” “Pro Logic” and the
double-D symbol are trademarks of Dolby
Laboratories.
*5 “DTS” and “DTS Digital Surround” are registered
trademarks of DTS, Inc.
*6 “DivX”, and “DivX Ultra” Certified, and associated
logos are trademarks of DivX, Inc. and are used
under license.
*7 Windows Media and the Windows logo are
trademarks, or registered trademarks of Microsoft
Corporation in the United States and/or other
countries.
Before You Start
1
Using the remote control
Thank you for buying this MARANTZ
product. Please confirm that the following
accessories are in the box when you open
it.
Keep in mind the following when using the
remote control:
• Remote control
• AAA/R03 dry cell batteries x2
• Audio/Video cable (yellow/red/white)
• Make sure that there are no obstacles between
the remote control and the remote sensor on the
unit.
English
What’s in the box
• Use within the operating range and angle, as
shown.
• System control cable
• Power cable
5m (16 feet)
• User Guide (this manual)
30
• Warranty card
1
2
3
30
Putting the batteries in the remote
control
• Remote operation may become unreliable if
strong sunlight or fluorescent light is shining on
the unit’s remote sensor.
Open the battery
compartment cover on
the back of the remote
control.
• Remote controllers for different devices can
interfere with each other. Avoid using remotes for
other equipment located close to this unit.
Insert two AAA/R03
batteries into the battery
compartment following
the indications (ª, ·)
inside the compartment.
• Replace the batteries when you notice a fall off in
the operating range of the remote control.
Note
• When using this player independently, set the
REMOTE CONTROL switch on the rear panel to
INT. (INTERNAL) (see page 10).
Close the cover.
Note
Incorrect use of batteries can result in hazards such
as leakage and bursting. Please observe the following:
• Don’t mix new and old batteries together.
• Don’t use different kinds of battery together.
Although they may look similar, different batteries
may have different voltages.
• Make sure that the plus and minus ends of each
battery match the indications in the battery
compartment.
• Remove batteries from equipment that isn’t going
to be used for a month or more.
When disposing of used batteries, please comply
with governmental regulations or environmental
bylaws that apply in your country or area.
7
1
Before You Start
Discs compatible with this player
Super Audio CD compatibility:
Any disc that displays one of the following
logos should play in this player. Other
formats, including DVD-RAM, DVD-ROM,
CD-ROM (except those that contain MP3/
DivX/WMA/JPEG files) and Photo CD will
not play.
• Logo:
• Single layer, dual layer or Hybrid layer
• 12cm (5in.) or 8cm (3in.) discs
• Digital audio (DSD)
Super Audio CDs are divided into tracks.
Audio CD compatibility:
DVD-Video compatibility:
• Logos:
• Logos:
• 12cm (5in.) or 8cm (3in.) discs
• Single-sided or double-sided discs
• Linear PCM digital audio
• Single layer or dual layer discs
• Audio CD, CD-R* and CD-RW* formats
• Dolby Digital, DTS, MPEG or Linear PCM digital
audio
CDs are divided into tracks.
• MPEG-2 digital video
Discs are generally divided into one or more titles.
Titles may be further subdivided into chapters.
DVD-Audio compatibility:
• Logos:
• Single sided discs
• Single layer or dual layer discs
• Linear or packed PCM digital audio
• Some discs may contain MPEG-2 video, and
Dolby Digital, DTS or MPEG digital audio
Discs are generally divided into one or more groups.
Groups may be further subdivided into tracks.
DVD-R compatibility:
*Some copy-controlled CDs may not conform to
official CD standards. They are special discs and may
not play on the DV7001.
*The DV7001 does not support the non-DVD side
of a Dual Disc.
Video CD compatibility:
• Logo:
• 12cm (5in.) or 8cm (3in.) discs
• MPEG-1 digital audio
• MPEG-1 digital video
Video CDs are divided into tracks.
This unit can play DVD-R discs. Please note the
following points when using these discs:
Super VCD compatibility:
• Logo:
• Logo:
• This unit can play DVD-R discs recorded as DVDVideo format.
• 12cm (5in.) or 8cm (3in.) discs
DVD-RW compatibility:
• MPEG-2 digital video
This unit can play DVD-RW discs. Please note the
following points when using these discs:
Super VCDs are divided into tracks.
• Logo:
• This unit can play DVD-RW discs recorded as
DVD-Video format, and DVD-VR format.
• DVD-RW discs that were recorded with copyonce only permission can be played.
DVD+R/+RW compatibility:
• Logo:
• This unit can play DVD+R/+RW discs. Please
note the followings points when using these
discs.
8
*This unit can play CD-R and CD-RW discs recorded
in Audio CD or Video CD format, or with MP3 audio
files or Windows Media audio files or picture files or
DivX files.
• MPEG-1 digital audio
Before You Start
• This player can not play the disc contents
protected by Windows Media Digital Right
Management (DRM).
JPEG compatibility information
English
DVD-Video regions
1
• While this player is designed to be able to
handle image data recorded in JPEG format,
no assurances are given that the player will be
able to display image data recorded in all JPEG
formats.
All DVD-Video discs carry a region mark
on the case somewhere that indicates
which region(s) of the world the disc is
compatible with. Your DVD player also has
a region mark, which you can find on the
rear panel. Discs from incompatible regions
will not play in this player. Discs marked
ALL will play in any player.
• This player can not display progressive JPEG
images.
General information
• Depending on the file size and compression
ratio, some JPEG pictures cannot be displayed
correctly.
• This player can recognize in total about 650 files
per folders and 300 folder per disc for MP3/
DivX/WMA.
• When writing MP3/WMA/JPEG/DivX files to CDR/RW discs, always be sure to set the writing
format to ISO 9660 Level 1.
• For MP3 and WMA files recorded in Variable Bit
Rate (VBR), the unit may not display the actual
elapsed time.
MP3 compatibility information
• Files should be MPEG1 Audio Layer 3 format.
The sampling rate is 8 kHz to 48 kHz, but it is
depends on the bit rate. Incompatible files will
not play.
• Audio encoded at 128 kbps should sound close
to regular audio CD quality. Although this player
will play 32 kbps to 320 kbps, but it is depends
on the sampling rate.
• This player is compatible with ID3 ver.1.1 Tag.
But the information display on the display on the
Front panel and TV screen is only ID3 ver. 1.0
Tag.
• Maximum 30 characters can be displayed on the
display on the Front panel and TV screen.
• This player cannot play DVD-R/RW discs with
recorded MP3 music data.
• This player only plays tracks that are named
containing the file extension “.mp3” or “.MP3”.
• This player is not compatible with multi-session
discs. If you try and play a multi-session disc,
only the first session will be played.
WMA compatibility information
• The sampling rate is 44.1 kHz (bit rate: 64
kbps-192 kbps) and 48 kHz (bit rate: 128
kbps-192 kbps).
• This player only plays tracks that are named with
the file extension “.wma” or “.WMA”.
• This player can not display HD JPEG images.
• Always be sure to specify a file extension of “.JPG”
or “JPEG” for JPEG files. The file will not be able
to be displayed if a file extension other than “.JPG”
or “JPEG” is specified or if no file extension is
assigned to the file. (Note that this means that
JPEG files created on a Macintosh will not be able
to be displayed as is.)
DivX compatibility information
• A file with an extension of “.avi” or “.divx” is called
a DivX file.
• Maximum 30 characters can be displayed on the
display on the Front panel and TV screen.
• Maximum 4 Gbyte of file size can be displayed.
• File should be MPEG1 Audio Layer 3 format and
MPEG2 format.
Caution!
• DVD±R/RW and CD-R/RW discs recorded using
a personal computer or a DVD or CD recorder
may not play if the disc is damaged or dirty, or if
there is dirt or condensation on the player’s lens.
• If you record a disc using a personal computer,
even if it is recorded in a compatible format,
there are cases in which it may not play because
of the settings of the application software used
to create the disc. (Check with the software
publisher for more detailed information.)
• There may be times when it is impossible
to replay a CD-R/RW disc because of the
characteristics of the disc being used or because
of dirt or scratches on the disc.
• Unfinalized DVD-R/RW discs cannot be played.
• Unfinalized CD-R/RW discs cannot be played.
• For more information on using DVD-R/RW and
CD-R/RW discs, see “Handling discs” on page
55.
• Never try to replay anything other than a music
CD (CDA format) or a CD-R/RW on which MP3
and/or JPEG files have been stored. Depending
on the type of file, there may be times when
doing so will result in problems or erroneous
operation.
9
2
Connecting Up
Easy setup
Important
This easy setup is the minimum set of
connections you need to start watching
DVD-Video discs. Both sound and picture
are fed directly to your TV using the
supplied audio/video cables. For other
possible connections, see pages 11 and 12.
1
RS-232C terminal/
FLASHER IN
Control terminal for use by
custom installers.
OUT
• Before making or changing any rear panel
connections, make sure that all components are
switched off and unplugged from the wall outlet.
• While a connected component is turned on,
do not unplug the power cord of this DVD
player from the wall outlet. The speaker may be
damaged.
Connect to a composite video
input on your TV using the
supplied Audio/Video cable.
2
Connect to a pair of stereo audio
inputs on your TV using the
supplied Audio/Video cable. You
can connect a subwoofer to the
SUBWOOFER Jack.
IN
AC IN
HDMI
Ver 1.1
AUDIO OUT
FRONT
RS-232C
SURR.R
SURR.L
SUB WOOFER
CENTER
R
MIXED
2CH
L
R
L
VIDEO
FLASHER IN
Remote Switch
S1
1
2
INT.
EXT.
REMOTE
CONTROL
See Note:
COAX.
COMPONENT
Y
CB /PB
CR /PR
OPT.
DIGITAL
OUT
INT.
VIDEO OUT
3
A/V EUROCONNECTOR
Plug into a standard
AC wall outlet.
EXT.
Connecting audio/video cables
Be sure to insert each
plug fully for the best
connection. The plugs
and jacks are color-coded
to make connection
easier.
Connecting system control cables
By connecting this DVD player to another
Marantz audio component using a supplied
system control cable, you can remotely
operate the components as a single system.
Note
• When connecting to a standard TV, select
4:3 LETTER BOX or 4:3 PAN SCAN in the TV
Aspect setting (see page 45).
• Connect the video output of the player directly
to your TV. Because the player is designed
to support an Analog Protection System copy
protection there are cases when proper playback
will not be possible if the player is connected to
the TV through a VCR and images are recorded
and played on the VCR.
• The player’s video output and S1 output are not
be progressive.
•
• When connecting to a component with a
remote sensor, be sure to connect the REMOTE
CONTROL IN jack of this DVD player to
the REMOTE CONTROL OUT jack of the
component with the remote sensor.
• When connecting to component which is
not equipped with a remote sensor, be sure
to connect the component to the REMOTE
CONTROL OUT jack of this DVD player.
10
Remote switch
When using this DVD player independently, set
this switch to INT. (INTERNAL). When using this
DVD player in a system with a Marantz receiver
equipped with a remote sensor, set the switch to
EXT. (EXTERNAL). Change the switch setting
using a pen with a sharp tip etc.
•
Flasher Input
This is used when controlling components
from different rooms with a keypad or other
input device. Set the remote switch to EXT.
(EXTERNAL) when using a flasher input.
Connecting Up
2
Important
This player outputs video in a number
of different ways. Choose the one most
suitable for your system using the guide
below.
1
• Before making or changing any rear panel
connections, make sure that all components are
switched off and unplugged from the wall outlet.
• While a connected component is turned on,
do not unplug the power cord of this DVD
player from the wall outlet. The speaker may be
damaged.
If your TV has a component video input, we
recommend using it to connect directly to the
COMPONENT VIDEO OUT of this player. Use
the standard 3-jack component video output.
OUT
English
Home theater video connections
If your TV has a SCART input, we
recommend using it to connect directly
to the A/V EURO CONNECTOR on
this player. (for Europe only)
IN
AC IN
HDMI
Ver 1.1
AUDIO OUT
FRONT
RS-232C
SURR.R
SURR.L
SUB WOOFER
CENTER
R
MIXED
2CH
L
R
L
VIDEO
FLASHER IN
INT.
EXT.
REMOTE
CONTROL
3
If your TV and projector have
a HDMI terminal for Video and
Audio Input, we recommend
using it to connect directly to
the HDMI out of this player.
COMPONENT
Y
CB /PB
CR /PR
COAX.
S1
1
2
OPT.
DIGITAL
OUT
2
VIDEO OUT
A/V EUROCONNECTOR
If a component input is not
available to you, connect this
player to your TV or AV receiver
using either the VIDEO or S1
jacks.
Connecting SCART (for Europe only)
and S-Video cables
SCART and S-Video cables will only plug in
one way, so make sure the plug is correctly
lined up with the jack before inserting. Be
sure to fully insert for a good connection.
Note
• The A/V EURO CONNECTOR can output
composite or RGB component video. If you
connect just one TV, use the A/V EURO
CONNECTOR. You can select the type of video
output by changing the COMPONENT setting in
the DVD Setup Menu (page 49).
S-Video or composite video?
S-Video should give a better picture, so if
you have an S-Video input, use it. S-Video
cables are available from any good audio/
visual dealer.
4
Plug into a standard
AC wall outlet.
Connecting HDMI cables
With an HDMI cable, both uncompressed
video data and digital audio data (e.g.,
LPCM or bit stream data such as Dolby
Digital, DTS, MPEG data or DVD Audio
Multi channel) can be transmitted with just
a single connector.
By transmitting DVD image data directly as
digital data without it being first converted
into analog format, it becomes possible to
provide the very finest in image quality (see
pages 6, 41, 42, 47).
Note
• The HDMI output of this unit can be connected
to a DVI jack on a TV or other device using a
conversion adapter. In this case, it is necessary
to use a TV or display with an HDCP-compatible
DVI input.
• There may be no image output if connected to
a TV or display that is not compatible with the
above format.
• Refer to the instruction manual of the TV or
display to be connected to this unit for detailed
information regarding the HDMI terminal.
• When connecting a progressive input TV with the
component output of the player, select ON in
the Progressive setting (see page 45).
11
2
Connecting Up
Home theater audio connections
Important
This player outputs multi-channel audio
in digital form. Check the manual for your
amplifier/receiver to see what equipment it
is compatible with (especially which digital
formats such as Dolby Digital, DTS, etc. It
can decode).
1
• While a connected component is turned on,
do not unplug the power cord of this DVD
player from the wall outlet. The speaker may be
damaged.
2
If your amplifier has 5.1 channel analog
inputs, connect them here. Connect to the
L (left)/R (right), SURR.L/.R (SURROUND
L/R), CENTER and SUB WOOFER inputs
of your amplifier.
OUT
• Before making or changing any rear panel
connections, make sure that all components are
switched off and unplugged from the wall outlet.
If your amplifier has stereo inputs
only, connect them here. You
can connect a subwoofer to the
SUBWOOFER Jack.
IN
AC IN
HDMI
Ver 1.1
AUDIO OUT
FRONT
RS-232C
SURR.R
SURR.L
SUB WOOFER
CENTER
R
MIXED
2CH
L
R
L
VIDEO
FLASHER IN
INT.
EXT.
REMOTE
CONTROL
3
COAX.
COMPONENT
Y
CB /PB
CR /PR
VIDEO OUT
4
Connecting analog audio cables
Be sure to fully insert each plug for the
best connection. The plugs and jacks are
color-coded to make connection easier.
Connecting coaxial cables
Use an interconnector with a pin-type
(also called RCA
or phono) plug on
each end to connect
up digital coaxialtype jacks. Make
sure that the plug is
pushed fully home.
A/V EUROCONNECTOR
Plug into a standard
AC wall outlet.
the protective shutter will open and you
should hear it click into position when fully
inserted. Be careful that you do not force
the plug, because this could result in damage to the protective shutter, the cable, or
the unit itself.
Note
COAX
• If you listen to multichannel DVD-Audio through
one of the digital outputs, it will be downmixed
to stereo. Also, high sampling rate DVD-Audio
(192 kHz or 176.4 kHz) will be downsampled
to 96 kHz, 88.2 kHz, 48 kHz or 44.1 kHz,
depending on the disc. Multi channel and high
sampling rate DVD-Audio are only available
through the analog outputs.
• All DVD-Audio and all Super Audio CD audio are
output only through the analog outputs. (see
page 40)
Connecting optical cables
12
1
2
OPT.
DIGITAL
OUT
Connect to the coaxial or
optical input of your amplifier
if it has digital inputs.
Optical interconnects only plug in
one way, so make
sure the plug is
correctly lined up
with the jack before
insertion. When
inserting the plug,
S1
OPT
Controls & Displays
3
1
3
2
English
Front panel
5
4
SUPER AUDIO CD/DVD PLAYER DV7001
PLAY
AUDIO EX.
STOP
PAUSE
HDMI
STANDBY
POWER
SRS TS
PRGSVE
VOFF GRP
GRP THX
O OFF TITLE PROG CHP
ON/OFF
TEXT 1 2
6
1
7
STANDBY indicator
• Lights when the unit is in standby.
2
Disc tray
3
3 (PLAY)
• Place the disc here.
• Begins playing the disc play.
4
7 (STOP)
5
8 (PAUSE)
• Stops playing the disc play.
• Pauses playing the disc play.
6
POWER ON/OFF
• Press to turn the power on, and press it again to
turn the power off.
7
AUDIO EX indicator
• Lights when the AUDIO EX is activated using the
AUDIO EX button on the remote control.
• The sound quality of analog audio output is
improved by turning off analog video signal
output and the front panel display.
• It is applied to CDDA, Super Audio CD, DVD
Audio and DTS CD in Play mode.
8
Display
• Operation indications are displayed here.
9
HDMI indicator
• When the connected device is HDMI/DVI
compatible, the light flashes red.
3 4
5 6
DOLBY D
A-B
ALL
7 8
192kHz PCM MPEQ COND MP3 M P M
96 kHz AWS
VCD V-PART
1
AUDIO TOTAL SUB BTSTM MAP SACD DOWN MIX
L C R
LFE
LS S RS
STEREO MULTI
9 10 11 12 13 14 15 16 17 18 19 20
8
AUDIO EX.
HDMI
9 0 -
OPEN/CLOSE
=
~
!
10 AUDIO EX
• Press to turn AUDIO EX off and on.
• HDMI video output cannot be switched off.
11 HDMI – page 47
• The HDMI on/off state toggles when pressed
for three seconds or more. When on, the HDMI
indicator is lit.
• Pressing this button while HDMI is enabled
displays the current resolution. Pressing this
button again while the resolution is displayed
allows you to select the resolution in the
sequence below:
480p Æ 576p Æ 720p Æ 1080i Æ 1080p Æ
480p
12 0 (OPEN/CLOSE)
• Press to open and close the disc tray.
13 4 /1
• Press to skip reverse title/group, chapter, or track.
You can also press and hold this button for Fast
Reversed.
14 ¡/¢
• Press to skip forward title/group, chapter, or
track. You can also press and hold this button for
Fast Forward.
13
3
Controls & Displays
Remote control
5
1
6
7
2
3
4
5
!
@
#
6
%
^
7
&
8
9
0
8
¡
9
10
11
12
13
14
™
15
~
16
17
18
19
20
1
AUDIO EX – Press to turn AUDIO EX off
and on
• The sound quality of analog audio output is
improved by turning off analog video signal
output and the front panel display.
21
• HDMI video output cannot be switched off.
2
3
4
OPEN/CLOSE – Disc tray open/close –
page 16
ZOOM – pages 25, 30
HDMI – page 47
• The HDMI on/off state toggles when pressed
for three seconds or more. When on, the HDMI
indicator is lit.
• Pressing this button while HDMI is enabled
displays the current resolution. Pressing this
button again while the resolution is displayed
allows you to select the resolution in the
sequence below:
14
480p Æ 576p Æ 720p Æ 1080i Æ 1080p Æ
480p
4 (PREV.)/¢ (NEXT)– Skip – pages
16, 17, 19, 20, 29, 30, 52
• Allows you to search forward/backward through a
disc. Use to skip the title, chapter or track.
• Press and hold (4) for Fast Reversed.
• Press and hold (¢) for Fast Forward.
+
=
• Applicable models: PM-11S1, PM-15S1,
PM6001, PM7001, PM8001, SR9600.
(These models may not be handled depending on
the area.)
Non-applicable models: MARANTZ Amplifiers
and receivers which had released before 2006,
including PM-14, PM-17 and PM4001 except
above models.
$
*
(
)
_
REPEAT – pages 22, 29
A–B – page 23
ANGLE – pages 24, 30
INPUT (%/fi) button – These buttons
can switch between devices compatible with
MARANTZ receivers. Refer to the receiver
instruction manual for further details.
22
23
24
25
26
27
SCAN – pages 18, 19
TOP MENU (TOP-M)/RETURN – page 17
Cursor (2/3/5/∞) / ENTER button
DISPLAY (DISP.) – page 26
DISC SKIP – It is not used on this set.
POWER – Switches the player on or into
standby – page 16
SOUND MODE– Selects Audio out mode
and change the Super Audio CD Play back
area – pages 25, 39
PAGE – Turns the pages of DVD-Audio still
pictures – page 22
RANDOM – page 23
AUDIO – Changes the Hybrid Super Audio
CD Play back layer – page 25
SUBTITLE – pages 24, 32
VOLUME (5/∞) button – These buttons
can adjust the volume of devices compatible
with MARANTZ receivers. Refer to the
receiver instruction manual for further details.
MUTE button – This button can activate
the mute function of devices compatible with
MARANTZ receivers. Refer to the receiver
instructions for further details.
3 (PLAY) – pages 16, 20, 21, 29, 31, 32
8 (PAUSE) – pages 16, 21
7 (STOP) – pages 16, 30, 31, 33, 50
MENU – pages 17, 19, 24
SETUP – pages 33, 36, 39, 44, 50
Number buttons
Controls & Displays
English
Note
• HDMI ON is set when the unit is shipped from
the factory.
• Set HDMI under the DVD Setup Menu to use
HDMI functions (see pages 41, 42, 47).
• This remote control supports two remote control
codes: DVD1 and DVD2.
• When the unit is shipped from the factory, the
remote control is set to DVD1.
• To set the remote control to DVD2, hold down
both 7 (STOP) button and 2 number button on
the remote control for at least five seconds. (If
the batteries in the remote control are replaced
while the remote control is set to DVD2, the
setting will revert to DVD1.)
• To set the remote control back to DVD1, hold
down both 7 (STOP) button and the 1 number
button on the remote control for at least five
seconds.
• Also set the REMOT CODE on the FL menu to
the same setting as the remote control. (This
setting is set to DVD1 when the unit is shipped
from the factory.) (see page 34)
3
15
4
Getting Started
3
Load a disc.
Load a disc with the label side facing up, using the
disc tray guide to align the disc (if you’re loading
a double-sided DVD disc, load it with the side you
want to play face down).
4
Press 3 (PLAY) to start playback.
If you are playing a DVD or Video CD, a menu may
appear (see page 17).
Note
• For one-sided, two-layer discs containing movies, etc.,
there may be a short image stoppage at the point
where the layers change. This is not a malfunction.
• Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Basic playback controls
Button
3
What it does
Starts playback.
In title menu, it functions as the Enter
key.
8
Pauses a disc that’s playing.
Each time the button is pressed, a new
frame will appear.
7
Stops playback.
4
• Skips to the start of the current track or
chapter, then to previous tracks/chapters.
• Press and hold for Fast Reversed.
¢
• Skips to the next track or chapter.
• Press and hold for Fast Forward.
Numbers
Playback starts from the selected track/
chapter number.
ENTER
Select the current menu option.
Resuming playback from the last
stopped point
This DVD system is able to resume disc
Playing discs
playback from its last stopped point (only
possible for the last 10 discs that were
recorded without a menu).
The basic playback controls for playing
discs are covered here. Further functions
are detailed in the next chapter.
1
Load one of the last 10 discs played.
2
While “LOADING” appears on the display
panel, press PLAY 3 to start playback from
Note
• Throughout this manual, the term “DVD” means
DVD-Video, and DVD±R/RW. If a function is specific
to a particular kind of DVD disc, it is specified.
1
If you are playing a DVD or Video CD, also turn on
your TV and make sure that it is set to the correct
video input.
2
the last stop point.
Switch the player on.
Press OPEN/CLOSE to open the disc tray.
To cancel the resume mode
• Press 7 twice.
Important
While using the DVD playback controls, you may see
the
mark displayed on-screen. The
mark means
that the operation is not allowed by the player and
disc.
16
4
Getting Started
Many DVD discs contain menus. Sometimes
these are displayed automatically when you
start playback; others only appear when you
press MENU or TOP-M.
English
Navigating DVD disc menus
Note
• Some DVD-Audio discs feature a “Bonus Group”. To
access this group you have to input a password that
you can find on the disc’s packaging (see page 36).
Button
TOP-M
What it does
Displays the “top menu” of a DVD disc. This
varies with the disc.
MENU
Displays a DVD disc menu—this varies with
the disc and may be the same as the “top
menu”.
RETURN
Returns to the previously displayed menu
screen.
Cursor
Moves the cursor around the screen.
(2/3/5/∞)
ENTER
Selects the current menu option.
Numbers
Selects a numbered menu option
(some discs only).
Navigating Video CD PBC menus
Some Video CDs have menus from which you
can choose what you want to watch. These
are called PBC (Playback control) menus.
Press the MENU to turn the PBC function on
or off.
Note
• Some discs don’t allow PBC menus.
Button
RETURN
What it does
Displays the PBC menu.
Numbers
Selects a numbered menu option.
ENTER
Selects the current menu option.
4
Displays the previous menu page
(if there is one).
¢
Displays the next menu page
(if there is one).
17
5
Playing Discs
Preview function
DVD
1
Video-CD
SVCD
CD
Press SCAN.
SVCD
VCD
SELECT DIGEST TYPE
TRACK DIGEST
DISC INTERVAL
TRACK INTERVAL
DVD-Video
SELECT DIGEST TYPE
TITLE DIGEST
CHAPTER DIGEST
TITLE INTERVAL
CHAPTER INTERVAL
DVD-Audio
SELECT DIGEST TYPE
GROUP DIGEST
TRACK DIGEST
GROUP INTERVAL
TRACK INTERVAL
2
Use the 5/∞ keys to select one of the
following options and press ENTER.
This option is only available during playback mode.
• TRACK/TITLE/CHAPTER/GROUP DIGEST
– View six different TRACK/TITLE/CHAPTER/
GROUP on one screen each time. This allows you
to have a quick glance at all the TRACK/TITLE/
CHAPTER/GROUP on the disc.
Introduction
• Many of the functions covered in this
chapter apply to DVD discs, Video CDs
and CDs, although the exact operation
of some varies slightly with the kind of
disc loaded.
• When playing DVD discs, if the icon
appears on-screen when you try to use
a particular function, either the player
or the disc doesn’t allow the use of that
function.
• When playing Video CDs, some of the
functions are not available in PBC mode.
If you want to use them, press the
MENU to turn the PBC function off (see
page 17).
18
• DISC/TITLE/GROUP INTERVAL – View the
whole disc in six thumbnail pictures. It divides
a disc into six portions at regular intervals and
displays them on one screen.
• TRACK/CHAPTER INTERVAL – View the
content of a single TRACK/CHAPTER in six
thumbnail pictures. It divides a single TRACK/
CHAPTER into six portions at regular intervals
and displays them on one screen.
• Use (2/3/5/∞) to select a track or
use the numeric buttons to enter the
selected track number.
5
Playing Discs
• Press ENTER on the selected thumbnail
picture to start playback from there.
• To return to the main menu, select MENU
on the screen and press ENTER.
3
English
• To go to the previous or next page, press
4/¢.
To exit the preview menu, select EXIT on
the screen and press ENTER.
For CD
• At stop mode, press SCAN on the remote
control. Each track will be played for a few
seconds.
Note
• You can select “Track Interval” only during playback
with PBC off.
• Some discs don’t allow the Scan mode.
19
5
Playing Discs
Fast Forward/Fast Reverse
DVD
Super Audio CD Video-CD
MP3
DivX
CD
WMA
The video images on DVD and VCD can be
viewed as a Fast Forward and Fast Reverse
with no sound.
In case of CD, the sound can be listened as a
Fast Forward and Fast Reverse with sound.
Viewing in Fast Forward/Fast Reversed
Press and hold ¢ (NEXT) during play.
• Fast Forward is engaged.
• During Fast Forward, the speed of play
back can be adjusted from x2 speed to
x32 speed in 5 steps using ¢ (NEXT).
Press and hold 4 (PREV) during play.
• Fast Reverse is engaged.
• During Fast Reverse, the speed of play
back can be adjusted from x2 speed to
x32 speed in 5 steps using 4 (PREV).
To return to normal play back press 3 (PLAY)
to normal play back.
Note
• The sound is muted during fast forward/reverse
scanning of DVD/VCD/Super Audio CD.
20
5
Playing Discs
Press 8 (PAUSE).
Viewing slow playback
English
Viewing a Paused Picture
With this function, DVDs can be viewed in both forward
and reverse direction. Video CD can only be moved in
the forward direction.
Press ∞ (down) during play.
• Slow playback is engaged.
• During slow playback, the speed of playback can be
adjusted from 1/2 normal playback speed to 1/16
normal playback
1/2 1/4 1/8 1/16
speed in 4 steps
using ∞ (down).
Press 5 (up) during play.
• Slow playback in the reverse direction is engaged.
• During slow playback, the speed of playback can be
adjusted from 1/2 normal playback speed to 1/16
normal playback
1/2 1/4 1/8 1/16
speed in 4 steps
using 5 (up).
To return to normal playback
When the picture is paused or during slow playback,
pressing 3 (PLAY) restores normal playback operation.
Step Motion playback: Viewing one
frame at a time
With this function, DVDs and Video CDs can only be
moved in the forward direction.
Press 8 (PAUSE).
Each time the button is pressed, a new frame will
appear.
To return to normal playback
When viewing Step Motion playback, pressing 3 (PLAY)
restores normal playback operation.
Note
Still Frame/Slow Play/Frame Advance
Playback
DVD-Video
Video-CD
The video images on DVD and Video CD
can be viewed as a still frame, played back
at slow speeds and even advanced frame by
frame (Forward only).
• There is no sound picture playback is paused or
during slow playback, or when advancing one frame
at a time.
• Pausing picture, slow play, or Step Motion playback
may not be possible with certain titles. In this case,
the
mark is displayed.
• A short sound may be noticeable when switching to
slow playback.
• When you press the 8 (PAUSE) button during slow
playback, it may advance a few frames past the
frame where you want it to stop.
21
5
Playing Discs
Using the page
DVD-Audio
Some DVD-Audio discs contain
information pages for photo galleries,
artist biographies, lyrics, etc.
Press the PAGE button on the remote
control during Playback. You may select the
image you want by moving the cursor button
(2/3).
Using the Repeat Play
DVD-Video
CD
DVD-Audio Super Audio CD Video-CD
MP3
JPEG
DivX
WMA
You can set the player to repeat individual
tracks on CDs or Video CDs, chapters or
titles on DVD discs, or the whole disc. It’s
also possible to loop a section of a disc.
You can’t use any repeat mode or looped
play with a Video CD playing in PBC mode.
Press REPEAT during playback to select a
repeat mode.
Each press switches the repeat mode:
DVD-Video
• CHAPTER REPEAT
• TITLE REPEAT
• DISC REPEAT
• OFF
DVD-Audio
• TRACK REPEAT
• GROUP REPEAT
• DISC REPEAT
• OFF
Video-CD
CD
JPEG
DivX
MP3
WMA
Super Audio CD
• TRACK REPEAT
• DISC REPEAT
• OFF
Note
• Some discs don’t allow the Repeat function.
• Any existing RANDOM or Repeat A-B mode will be
cancelled and Repeat mode will be activated.
22
5
Playing Discs
DVD
Super Audio CD Video-CD
MP3
1
DivX
CD
WMA
Press A-B once at the start of the section
you want to repeat, then again at the end.
English
Looping a section of a disc
Playback immediately jumps back to the start point and
plays the loop round and round.
• On a DVD disc, the start and end points of the
loop must be in the same title/chapter.
• On a Video CD/CD disc, the start and end points
of the loop must be in the same track.
2
To resume normal playback, press A-B
again.
Note
• There may be a slightly difference between point A
and the location where playback actually resumes
depending on the disc.
• After Repeat A-B is exited, any existing Repeat or
RANDOM modes will be restored.
Using the Random (SHUFFLE) Play
DVD
Super Audio CD Video-CD
MP3
DivX
WMA
CD
JPEG
Use the random play function to play tracks
in a random order.
You can’t use random play with DVD-VR
mode or Video CD playing in PBC mode.
Press the RANDOM button during playback
to select a RANDOM (SHUFFLE) mode.
• SHUFFLE
• SHUFFLE REPEAT
• SHUFFLE OFF
To cancel Random mode, press RANDOM.
Note
• Any existing Repeat or Repeat A-B modes will be
cancelled and RANDOM mode will be activated.
• If the disc currently playing is a CD layer of Super
Audio CD, CD layer of Super Audio CD will be
played.
• For Hybrid Super Audio CDs, tracks on the Super
Audio CD layer are played by default.
23
5
Playing Discs
Switching Camera Angles
DVD-Video
Some DVD-Video discs feature scenes shot
from two or more angles. Check the disc box
for details: it should be marked with a
icon if it contains camera-angle scenes.
•
To switch the camera angle, press ANGLE.
Note
• Depending on the disc, this feature may not work.
Switching the Subtitle Language
DVD-Video
DivX
Many DVD-Video discs or DivX discs have
subtitles in one or more languages. The
disc box will usually tell you which subtitle
languages are available. You can switch the
subtitle language at anytime during playback.
•
To display/switch the subtitle language,
press SUBTITLE repeatedly.
The current subtitle language is shown on-screen.
•
To set subtitle preferences, see page 50.
Note
• In some cases, a subtitle can not be turned off even
if you select “OFF”.
• Some discs allow you to change subtitles only via
the disc menu. In that case, press the MENU button
and change the settings.
24
5
Playing Discs
Depending on the disc, this feature may not
work.
Video-CD
•
English
Switching the audio channel
On Video CDs you can switch between
stereo, just the left channel, just the right
channel or Mixed Mono.
To switch the audio channel, press AUDIO
repeatedly.
The current playback channel(s) are indicated onscreen.
Switching Super Audio CD Playback
layer
Super Audio CD
• On a hybrid disc (with Super Audio CD and CD layers),
the player will always start playing the Super Audio CD
layer.
• To switch between the Super Audio CD layer and the
CD player, press AUDIO while playback is stopped.
Switching Super Audio CD Playback
area
Super Audio CD
• To Switch between the Super Audio CD multi-channel
and Super Audio CD stereo areas by pressing SOUND
MODE.
Using the Zoom Function
DVD-Video
JPEG
During play or pause mode, press the
ZOOM button on the remote control to
zoom in x2, x3, x4, x1/2, x1/3, x1/4,
Normal in order for DVD-Video or VCD and
100%, 125%, 150%, 200%, Normal in
order for JPEG.
2
The current audio language is shown on-screen.
Use the cursor buttons (5/∞/2/3) to
select the part of the screen you want to
zoom in on.
To set audio language preferences, see page
50.
• Zoom play cannot be used on some discs.
DVD-Video
DVD-Audio
When playing a DVD-Video disc recorded
with dialog in two or more languages, you
can switch the audio language at anytime
during playback.
•
Video-CD
1
Switching the Audio Language
•
DVD-Audio
To display/switch the audio language, press
AUDIO repeatedly.
Note
Note
• Zoom will not operate properly for some scenes.
• Zooming may cause image deterioration or shaking.
• Depending on the disc, there are cases in which the
audio language cannot be switched during play. In
this case, make changes using the DVD menu.
• It may take a few seconds till a selected Audio
Language is audible.
25
5
Playing Discs
Play back Information
This DVD system can display the disc
playback information (for example, title
or chapter number, elapsed playing time,
audio/subtitle language) and a number of
operations can be done without interrupting
disc playback.
DVD-Video
1
Video-CD
During playback, press DISP.
• A list of available disc information appears
on the TV.
DVD
MENU
TITLE
01/07
CHAPTER
01/30
AUDIO
2CH
SUBTITLE
OFF
BITRATE 00
Video-CD
ENG
TITLE ELAPSED 0:00:23
SVCD
MENU
TRACK
01/01
DISC TIME
1:01:14
TRACK TIME
1:01:14
REPEAT
OFF
BITRATE 75
TOTAL ELAPSED 0:00:20
Title/Chapter/Track selection
DVD-Video
Video-CD
1
Press 5/∞ to highlight “Title” / “Chapter”
or “Track”, then press ENTER to access.
2
Use the numeric keypad (0-9) to enter a
valid number (e.g. 04/05).
Audio/Subtitle
DVD-Video
1
Press 5/∞ to highlight “Audio” or
“Subtitle”, then press ENTER to access.
The Audio or Subtitle menu appears on the TV.
2
Press 5/∞ to select one language, then
press ENTER to confirm.
The current audio or subtitle language will be changed
to the selected language.
26
5
Playing Discs
Time Search
DVD-Video
DVD-Video
1
Press 5/∞ to highlight “Angle”, then press
ENTER to access.
2
Use the numeric keypad (0-9) to enter in a
valid number.
3
Video-CD
1
Press 5/∞ to highlight “TT Time”/“CH
Time”/“Disc Time” or “Track Time”, then
press ENTER to access.
2
Use the numeric keypad (0-9) to enter a
valid time (e.g. 0:34:27).
Press ENTER to confirm.
English
Angle
The playback skips to the chosen time.
Playback will go to the selected angle.
Note
Time Display
DVD-Video
1
• Some disc don’t allow the Time Search mode.
Video-CD
• You can’t use Time Search mode with a Video CD
playing in PBC mode.
Press 5/∞ to highlight “Time Disp.”, then
press ENTER to access.
Repeat
The following display types appear on the TV,
depending on the disc in the player.
For DVD discs:
DVD-Video
1
Press 5/∞ to highlight “REPEAT”, then
press ENTER to access.
2
Press 5/∞ to select the desired repeat
mode, then, press ENTER to access.
TITLE Elapsed - elapsed playing time of current Title;
TITLE Remain - remaining playing time of current Title;
CHAPTER Elapsed - elapsed playing time of current
Chapter;
Video-CD
CHAPTER Remain - remaining playing time of current
Chapter;
For VCD/SVCD discs:
Total Elapsed - elapsed playing time of current Disc;
Total Remain - remaining playing time of current Disc;
Single Elapsed - elapsed playing time of current Track;
Single Remain - remaining playing time of current Track;
2
Press 5/∞ to select the desired time
display mode, then press ENTER to display
the selected item.
27
5
Playing Discs
Group/Track Selection and time search
Each time you press DISPLAY, the TV display
changes as follows.
GROUP 01/05 TRACK 01/15 0:10:00
GROUP 01/05 TRACK --/15
GROUP 01/05 TIME -/--/--
TRACK 01/15 TIME -/--/--
1
Press 5/∞ to select the Track, Group Time
or Track time.
2
Use the numeric keypad (0-9) to enter a
valid number.
EX: Enter hours, minutes and seconds from
left to right.
3
Press ENTER to confirm.
Note
• When searching for a time in a group/ track, if
you enter a time outside the total time for the
group/track currently being played back,
INPUT
INVALID is displayed.
28
Time
CD
DVD-Audio
Press DISPLAY (DISP.) repeatedly during
playback to change the displayed disc time
information.
TOTAL ELAPSED
TOTAL REMAIN
SINGLE REMAIN
SINGLE ELAPSED
5
Playing Discs
Insert a disc.
• The disc reading time may exceed 30
seconds due to the complexity of the
directory file configuration.
• The disc menu appears on the TV.
English
1
• Playback will start automatically. If not,
press 3 (PLAY).
00:00
001/014
00:00
MP3_files
Previous
MP3_MUSIC_1
MP3_MUSIC_2
MP3_MUSIC_3
2
If the disc main menu contains various
folders, use the 5/∞ keys to select a
desired folder and press ENTER to open
the folder.
3
Use the 5/∞ keys to select a track/file and
press ENTER to start playback.
• Playback will start from the selected file
and continue through to the end of the
folder.
During playback, you can;
• Press 4/¢ to playback another
track/file in the current folder.
• To select another folder from the current
disc, press 5 to return to the root menu.
Use the 5/∞ keys to make your selection
and press ENTER to confirm.
• Press REPEAT repeatedly to access
various play modes.
• OFF
• TRACK REPEAT: One file will be played
repeatedly.
• DISC REPEAT: All files in one folder will be
played repeatedly.
Tip
Playing an MP3/DivX/JPEG/
Windows Media™ Audio disc
This DVD system can playback most of the
MP3, JPEG and Windows Media™ Audio files
recorded on a CD-R/RW disc or commercial
CD.
• To skip the folders menu when you load a MP3/
JPEG disc, set the MP3/JPEG NAV setting in the
Preference Setup Page to WITHOUT MENU.
Note
• Some discs cannot be played on this player due to
the configuration and characteristics of the disc,
or due to the condition of recording and authoring
software that was used.
29
5
Playing Discs
2
Press 4/¢ to display the other pictures
on the previous/next page.
3
Use the 2/3/5/∞ keys to highlight one
of the pictures and press ENTER to start
playback.
4
Press the MENU to return to Picture CD
menu.
Zoom picture
1
During playback, press ZOOM repeatedly
to select a different zoom factor.
2
Use the 2/3/5/∞ keys to pan through the
zoomed image.
Tip
• This feature is not applicable for DivX discs.
• Zoom play cannot be used on some discs.
Rotating/flipping the picture
• During playback, use the 2/3/5/∞ keys
to rotate/flip the picture on the TV.
5: Flip the picture vertically
∞: Flip the picture horizontally
2: Rotate the picture counter-clockwise
3: Rotate the picture clockwise
Note
Playing a JPEG image file (slide show)
• Insert a Picture disc (Kodak Picture CD,
JPEG).
For a Kodak disc, the slide show will begin
automatically.
For a JPEG disc, the picture menu will appear on the
TV. Press PLAY 3 to start the slide-show playback.
Note
Some discs don't allow the Picture menu.
Preview function
1
30
During playback, press 7.
• 12 thumbnail pictures will be displayed on
the TV.
• Rotate and Flip operations are not supported on
DVD-Audio disc.
Scan Effect
• Press ANGLE repeatedly to choose a scan effect.
• Various scan effects appear in the top left corner of
the TV screen.
Note
Supported file format:
• The file extension has to be “*.JPG” and not “*.JPEG”.
• It can only display DCF-standard still pictures
or JPEG pictures e.g. TIFF. It cannot play back
moving pictures, Motion JPEG and other formats,
or pictures in formats other than JPEG, or pictures
associated with sound.
• It may require longer time for the DVD system to
display the disc content on the TV due to the large
number of songs/pictures compiled into one disc.
5
Playing Discs
You can create a musical slide show if the
disc contains both the MP3/WMA music and
JPEG picture files.
1
Insert an MP3/WMA disc that contains
music and pictures.
2
Select an MP3/WMA track in the menu and
press PLAY 3 to start playback.
3
During MP3/WMA music playback, use the
2/3/5/∞ keys to select a picture folder
from the disc menu and press PLAY 3.
English
Playing MP3/WMA music and JPEG
pictures simultaneously
• The picture files will be played back
through to the end of the folder.
4
To stop simultaneous playback, press
STOP 7.
Tip
• It is normal to experience an occasional “skip” while
listening to your MP3 disc.
• It is normal to experience an occasional pixelation
during MP3/DivX playback due to poor clarity of
digital contents during internet downloading.
• Only the first session of a multi-session CD will be
played back.
31
5
Playing Discs
Playing a DivX disc
This DVD system supports the playback of
DivX movies which you can copy from your
computer onto a CD-R/RW, DVD±R/±RW
disc (see page 9 for more information).
1
Insert a DivX disc.
2
Press PLAY 3 to start playback.
During playback, you can;
• If multilingual subtitles are embedded on
the DivX disc, you can press SUBTITLE
to change the subtitle language while
playing.
Tip
• Subtitle files with the following file name extensions
(.srt, .smi, .sub, .ssa, .ass) are supported but do not
appear on the file navigation menu.
• The subtitle file name has to be the same as the file
name of the movie.
• The subtitle can only be displayed up to an average
of 42 characters.
• The time search feature is not available during DivX
movie playback.
DivX compatibility information
• Support for DivX 3.11, 4.x, 5.x.
• Q-pel accurate motion compensation.
• Global Motion Compensation (GMC) Playback.
32
5
Playing Discs
Before using the player, you should specify
the settings to be used in accordance with
the conditions under which the player is to
be used.
Note that once changed, the settings will be
saved and remain the same even after the
power has been turned off until the settings
are changed again.
The Setup menu gives you access to all the
player’s settings. Press SETUP to display/
leave the menu and the cursor and ENTER
buttons on the remote control to navigate
and select options.
English
Using the Setup Menu
Note
• The language options shown in the on-screen
display illustrations on the following pages may not
correspond to those available in your country or
region.
1
Press the SETUP button on the remote
control. Select a tab using the cursor
buttons (2/3).
~ GENERAL SETUP: Setup of the GENERAL options
Ÿ AUDIO SETUP: Setup of the audio options
! VIDEO SETUP: Setup of the display and HDMI
Video options
⁄ PREFERENCE: Setup of the language, parental, and
several other options.
2
Use the cursor buttons (5/∞) on the
remote control to access the different
features.
3
Press the ENTER button as many times as
necessary to select the desired option.
To make the setup screen disappear after
setting up, press the SETUP button again.
Note
• Depending on the disc, some Setup Menu
selections may not work.
• Some settings can not be selected during
playback and RESUME mode of DVD-Video.
In that case, press the 7 (STOP) button once or
twice to stop playback completely.
33
6
DVD Setup Menu
Using the FL menu
The FL menu has been designed to set
"REMOTE CODE".
It can be set during stand by mode.
If a Disc had been loaded, press Power
button on the Remote Control to stand by
mode.
Selecting the FL menu
1
Press SET UP for longer than 2 sec.
2
Stand by LED is disappeared and "REMOTE
CODE" is displayed in the FL display.
REMOTE_CODE
• If press ENTER, current status is displayed.
DVD_1
3
Use the cursor buttons (5/∞) to select the
type of REMOTE CODE you want to set as
follows.
DVD 1
DVD 2
4
Press ENTER you want to set.
• Press SET UP for longer than 2 sec to close the FL
menu and then go back to standby mode.
Note
• The DVD player support two remote control codes:
DVD 1 and DVD 2.
• Set the remote control code of the Remote Control
to the same setting. (page 15)
34
6
DVD Setup Menu
GENERAL
SETUP
OSD LANGUAGE
PLAYER MODE
DIVX(R) VOD CODE
DISC LOCK *
DISPLAY DIM
PROGRAM *
SCREEN SAVER
SLEEP
AUTO STANDBY
AUDIO OUT
DIGITAL AUDIO
HDMI AUDIO OUT
SPEAKER SETUP
AUDIO SETUP
CD UPSAMPLING
AUDIO DRC
TV SYSTEM
TV ASPECT
PROGRESSIVE
PICTURE SETTING
ADV PICTURE
VIDEO SETUP
COMPONENT
BLACK LEVEL
CLOSED CAPTION
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PREFERENCE
PBC
MP3/JPEG NAV
VR LIST
PASSWORD
DIVX SUBTITLE
DEFAULT
Page
36
36
37
37
37
37
38
38
38
ENGLISH ESPANOL FRANCAIS
DVD AUDIO DVD VIDEO
LOCK
UNLOCK
100%
70% 40%
INPUT MENU
ON OFF
15 MINS 30 MINS 45 MINS
ON OFF
60 MINS
OFF
Page
39
2 CHANNEL VIRTUAL SURROUND 5.1 CHANNEL
DIGITAL OUT
OFF ALL PCM
LPCM OUT
48KHZ 96KHZ
AUTO MULTI PCM 2CH PCM OFF
SPEAKER SETUP PAGE
FRONT L/R
LARGE SMALL
CENTER
OFF LARGE SMALL
REAR LS/RS
OFF LARGE SMALL
LFE(SUBWOOFER) ON OFF
SPEAKER LEVEL
FRONT LEFT FRONT RIGHT CENTER LFE REAR LEFT
REAR RIGHT
SPEAKER DISTANCE
FRONT LEFT FRONT RIGHT CENTER LFE REAR LEFT
REAR RIGHT
OFF 88.2KHZ(X2) 176.4KHZ(X4)
ON OFF
41
41
41
42
43
43
43
PAL NTSC MULTI
4:3 PAN SCAN 4:3 LETTER BOX 16:9 WIDE
OFF ON
STANDARD BRIGHT SOFT
PERSONAL BRIGHTNESS SHARPNESS CONTRAST TINT
COLOR
DCDI
OFF ON
GAMMA
CHROMA DELAY
PSCAN FORMAT
SUPER WIDE 16:9 SQUEEZE OFF
HDMI VIDEO
480P 576P 720P 1080I 1080P
AUTO
DYNAMIC PICTURE
DVI OUTPUT RANGE ENHANCED STANDARD
YCbCr RGB
7.5 IRE 0 IRE
ON OFF
ENGLISH CHINESE (SIMP) FRENCH SPANISH etc.
OFF ENGLISH CHINESE (SIMP) FRENCH SPANISH
ENGLISH CHINESE (SIMP) FRENCH SPANISH etc.
1 KID SAFE
2G
3 PG
4 PG13
8 ADULT
ON OFF
WITH MENU WITHOUT MENU
ORIGINAL LIST PLAY LIST
CHANGE
STANDARD CYRILLIC
RESET
5 PGR
6R
7 NC17
English
A black dot (z) indicates the default setting
* It can be set only during STOP.
Page
44
45
45
46
46
46
47
48
49
49
49
49
Page
50
etc. 50
51
51
51
51
51
52
52
53
35
6
DVD Setup Menu
3
Use the cursor buttons (5/∞) to select the
desired item, then press the cursor (3) or
ENTER button.
GENERAL SETUP PAGE
OSD LANGUAGE
PLAYER MODE
DIVX(R) VOD CODE
DISC LOCK
DISPLAY DIM
PROGRAM
SCREEN SAVER
SLEEP
AUTO STANDBY
Note
• Press 2 to go back to the previous menu item.
Press SETUP to exit the menu.
OSD LANGUAGE
The language options are different
depending on your country or region, and
may not match the illustrations shown in the
user manual.
• Default setting: ENGLISH
The OSD (On-Screen Display) language for
this DVD system will remain as you have set
it, regardless of the changes made to the
DVD disc language.
Selects the preferred language for the DVD
system on-screen display menu.
PLAYER MODE
• Default setting: DVD AUDIO
• DVD Audio
Should be selected when the player is to be used as
a DVD audio player.
• DVD Video
Should be selected when the player is to be used as
a DVD video player.
Note
• Some DVD-Audio discs contain bonus groups that
are accessible by a four-digit password. In this case,
consult the disc jacket and other packaging for
information.
Setting up the GENERAL SETUP page
36
~ During play, press DISPLAY twice.
• The group and track list is displayed on the TV
screen.
1
Press the SETUP button.
Ÿ Press 2/3 to select a bonus group, then press
ENTER.
2
Select GENERAL SETUP PAGE using the
cursor buttons (2/3), then press the
ENTER button.
! Enter a four-digit password using the numeric
keypad (0-9), then press ENTER.
⁄ Set will start to playback the bonus group.
6
DVD Setup Menu
PROGRAM
MARANTZ provides you with the DivX® VOD
(Video On Demand) registration code that
allows you to rent and purchase videos using
the DivX® VOD service. Press 3 to see the
registration code and press ENTER to exit.
Use the registration code to purchase or
rent the videos from the DivX® VOD service
at www.divx.com/vod. Follow the instructions
and copy the video from your computer onto
a CD-R/RW disc for playback on this DVD
system.
Note
DVD-Video
• Default setting: 100%
Selects the brightness of the DVD system
display panel.
• 100% – Full brightness.
• 70% – Medium brightness.
• 40% – Dimmest display.
1
TT: CH:
6
TT: CH:
2
TT: CH:
7
TT: CH:
3
TT: CH:
8
TT: CH:
4
TT: CH:
9
TT: CH:
5
TT: CH:
10
TT: CH:
NEXT
Use the numeric keypad (0-9) to enter a
valid track/chapter number.
2
Use the 2/3/5/∞ keys to move the cursor
to the next position.
• If there are more than ten total
programme tracks, select NEXT on the
screen (or press ¢ on the remote
control) and press ENTER to access the
next programming page.
3
To remove the track/chapter from the
programming menu, select the track/
chapter and press ENTER.
4
Once complete, select START on the screen
and press ENTER to start playback.
• Playback will start from the selected track
under the programmed sequence.
5
To exit the programme menu, select EXIT in
the menu and press ENTER.
DISC LOCK
DISPLAY DIM
CD
1
• The time search function is not available during
DivX movie playback.
• Default setting: UNLOCK
Not all discs are rated or coded by the disc
maker. You can prevent a specific disc from
playing by locking the disc. Up to 40 discs
can be locked.
• LOCK – Selects this to block the playback
of the current disc. Subsequent access to
a locked disc requires a six-digit password.
The default password is “111111”.
• UNLOCK – All discs can be played.
Video-CD
PROGRAM TT(07)/CH(- -)
®
• Any video the downloaded from DivX VOD can
only be played back on this DVD system. For more
information, visit us at www.divx.com/vod.
DVD-Audio
You can play the contents of the disc in the
order you want by programming the playing
order of the tracks. You can store up to 20
tracks.
English
DivX(R) VOD CODE
Note
• On Super Audio CD discs, you can program tracks
on the CD layer.
• When playing back to program, previous RANDOM
and repeat modes are all cancelled.
• When in VCD 2.0 mode (PBC ON mode), this
function does not work.
• DVD-VR can not be programmed.
• DVD-Audio Bonus Group/Tracks can not be
programmed.
37
6
DVD Setup Menu
SCREEN SAVER
• Default setting: ON
The screen saver prevents damage to the TV
screen by avoiding exposure to a static image
for too long.
• ON – Switches to TV screen saver mode
when playback has been stopped or
paused for more than 15 minutes.
• OFF – Turns off the screen saver function.
SLEEP
• Default setting: OFF
This feature automatically sets the DVD
player in standby mode after the period you
set has elapsed.
You can select from 15, 30, 45, and 60
minutes. Select OFF to cancel the sleep timer
function.
Press ENTER to confirm your selection.
AUTO STANDBY
• Default setting: ON
If ON is selected, the standby mode is
automatically selected to save power if the
player is left in the Stop mode for about 30
minutes.
38
6
DVD Setup Menu
Use the cursor buttons (5/∞) to select the
desired item, then press the cursor (3) or
ENTER button.
English
3
AUDIO SETUP PAGE
AUDIO OUT
DIGITAL AUDIO
HDMI AUDIO OUT
CD UPSAMPLING
AUDIO DRC
Note
• Press 2 to go back to the previous menu item.
Press SETUP to exit the menu.
AUDIO OUT
If you connected this player to your amplifier
using the 5.1 channel analog outputs (front,
surround, center and subwoofer outs), set
this to 5.1 Channel; if you connected only
the stereo outputs, set to 2 Channel.
• Default setting: 5.1 CHANNEL
• 2 CHANNEL – Select this to change
the channel output to stereo, which
only delivers sound from the two front
speakers and a subwoofer.
• VIRTUAL SURR – Select this to virtually
reproduce the surround channels.
• 5.1 CHANNEL – Select this setting
when using a multichannel audio/(video)
receiver with 6 channel inputs. In this
mode, the player performs DTS decoding
or Dolby Digital 5.1-channel decoding
when applicable, and Dolby Pro Logic
decoding on DVD-Video, Video-CD and
Audio CD discs with 2-channel sound
tracks. No Dolby Pro Logic decoding is
done with Super Audio CD discs.
Note
• You can also select it using the SOUND MODE
buttons on the remote control.
• Some DVD-Audio discs don’t allow downmixing of
audio.
Setting up the AUDIO SETUP page
1
Press the SETUP button.
2
Select AUDIO SETUP PAGE using the cursor
buttons (2/3), then press the ENTER
button.
39
6
DVD Setup Menu
About source audio output
When the source output mode has been switched among 2CH, Virtual Surround and 5.1 CH
mode setting using the Audio Out setting, audio output for each source will be as shown in the
following table.
Audio Contents
Dolby Digital
(2CH)
Dolby Digital
(Multi CH)
LPCM
(2CH)
DTS, DVDVideo/Audio
(2CH), CD
DVD
DTS,
DVD-Audio
(Multi)
MPEG
(MULTI)
DVD-Audio
(2CH)
DVD-Audio
(Multi)
CD
2ch
Super
Audio
CD
Multi
Video CD
S-Video CD 2ch
MP3/DivX,WMA
Audio Out Setting
2 CH
Mixed 2ch output
2ch L/R
5.1CH output
Virtual Surround
2ch L/R
2ch+Vsurround
Digital output
2ch L/R
PCM (Digital out is PCM)
Bitstream (Digital out is All)
5.1 CH
2ch L/R
Dolby Pro Logic II
2 CH
Mixed 2ch (L0/R0)
Mixed 2ch (L0/R0)
Virtual Surround
Mixed 2ch (Lt/Rt)
Mixed 2ch+Vsurround
PCM Mixed 2CH
(Digital out is set to PCM)
5.1 CH
Mixed 2ch (Lt/Rt)
Multi CH
Bitstream (Digital out is set to All)
2 CH
2ch L/R
2ch L/R
PCM 2ch 44.1/48KHz
Virtual Surround
2ch L/R
2ch+Vsurround
5.1 CH
2ch L/R
Dolby Pro Logic II
(88.2/96KHz if LPCM OUT is set
to 96KHz.)
2 CH
2ch L/R
2ch L/R
Virtual Surround
2ch L/R
2ch+Vsurround
PCM (Digital out is PCM)
Bitstream (Digital out is All)
5.1 CH
2ch L/R
2ch L/R
2 CH
Mixed 2ch (L0/R0)
Mixed 2ch (L0/R0)
Virtual Surround
Mixed 2ch (Lt/Rt)
Mixed 2ch+Vsurround
PCM Mixed 2CH
(Digital out is set to PCM)
Bitstream (Digital out is set to All)
5.1 CH
Mixed 2ch (Lt/Rt)
Multi CH
2 CH
Mixed 2ch (L0/R0)
Mixed 2ch (L0/R0)
Virtual Surround
Mixed 2ch (Lt/Rt)
Mixed 2ch+Vsurround
5.1 CH
Mixed 2ch (Lt/Rt)
Multi CH
2 CH
2ch L/R
2ch L/R
Virtual Surround
2ch L/R
2ch L/R
5.1 CH
2ch L/R
2ch L/R
2 CH
2ch (Lf/Rf)
2ch (Lf/Rf)
Virtual Surround
2ch (Lf/Rf)
2ch (Lf/Rf)+Vsurround
5.1 CH
2ch (Lf/Rf)
Multi CH
2 CH
2ch L/R
2ch L/R
Virtual Surround
2ch L/R
2ch+Vsurround
5.1 CH
2ch L/R
Dolby Pro Logic II
PCM 2CH
(see page 42)
PCM 2ch (Lf/Rf)
(see page 42)
PCM 2ch 44.1KHz
2 CH
2ch L/R
2ch L/R
Virtual Surround
---
---
OFF
5.1 CH
---
---
OFF
OFF
2 CH
---
---
OFF
Virtual Surround
---
---
OFF
5.1 CH
Mixed 2ch (Lt/Rt)
Multi CH
OFF
2 CH
2ch L/R
2ch L/R
PCM 2ch 44.1KHz
Virtual Surround
2ch+Vsurround
2ch+Vsurround
PCM 2ch 44.1KHz + Vsurround
5.1 CH
Mixed 2ch
Dolby Pro Logic II
PCM 2ch 44.1KHz
2 CH
2ch L/R
2ch L/R
Virtual Surround
2ch L/R
2ch+Vsurround
5.1 CH
2ch L/R
Dolby Pro Logic II
Note
• No Dolby Pro Logic II is allowed on DTS, DVD-Audio and Super Audio CD audio track.
• LFE (Subwoofer) will always carry the LFE channel.
40
PCM (Digital out is PCM)
Bitstream (Digital out is All)
PCM 2CH
6
DVD Setup Menu
HDMI AUDIO OUT
• Default setting: ALL
Set the Digital output according to your
optional audio equipment connection.
• OFF – Turn off the digital output.
• ALL – If you have connected your DIGITAL
AUDIO OUT to a multi-channel decoder/
receiver.
• PCM ONLY – Only if your receiver is not
capable of decoding multi-channel audio.
• Default setting: AUTO
• AUTO – In this mode, when discs
recorded in Dolby Digital, DTS, or MPEG
are played, the respective bit stream signal
is output. When DVD-Video/DVD-Audio
discs with multi-channel audio are played,
the multi-channel signal is output. When
discs recorded in 2-channel PCM or other
2-channel format are played, the audio
is output as 2-channel PCM. The output
formats are limited by the capabilities of
the connected component. For example,
if the disc is recorded in Dolby Digital
but the connected component does not
support Dolby Digital, the audio is output
as multi-channel PCM. If the connected
component does not support multichannel PCM either, the audio is output
as 2-channel PCM.
• Multi PCM – In this mode, when discs
recorded in Dolby Digital, DTS, MPEG,
or DVD-Video/DVD-Audio are played,
a multi-channel signal is output. When
discs recorded in 2-channel PCM or other
2-channel format are played, the audio
is output as 2-channel PCM. The output
formats are limited by the capabilities of
the connected component. For example,
if the disc is recorded in Dolby Digital
but the connected component does not
support Dolby Digital, the audio is output
as 2-channel PCM.
• 2ch PCM – In this mode, audio is output
as 2-channel PCM for all discs. Select this
mode when the unit is connected to a TV
or projector.
• Off – Audio signals are not output from
the HDMI jack.
Note
• If HDMI is activated, DIGITAL OUT is muted. HDMI
audio out is related to the “DIGITAL OUT” setting.
If set the “ALL” is set, HDMI Audio out is follows the
EDID. If set the “PCM” is set, HDMI Audio out is
always PCM.
• If you set to “ALL” with a non-DTS compatible
amplifier, noise will be output when you play a DTS
disc.
• Some DVD-Audio discs prohibit digital audio out
due to copy protection.
• No digital audio is output when playing Super
Audio CD.
LPCM OUT
• Default setting: 48kHz
If you connect the DVD Player to a PCM
compatible receiver via digital terminals,
coaxial or optical, you may need to adjust
“LPCM Output”. Discs are recorded at
a certain sampling rate. The higher the
sampling rate, the better the sound quality.
• 48kHz – Playback a disc recorded at the
sampling rate of 48 kHz. A 96 kHz (if
available on disc) PCM data stream will be
converted to 48 kHz.
• 96kHz – Playback a disc recorded at the
sampling rate of 96 kHz. If the 96 kHz
disc is copy-protected, the digital output
will automatically be converted to a
sampling rate of 48 kHz.
Note
• High sampling rate DVD-Audio discs (192 kHz or
176.4 kHz) always output audio that has been
down sampled to 96 kHz or 88.2 kHz through the
digital outputs, when LPCM OUT is set to 96 kHz.
English
DIGITAL OUT
Note
• When audio signals are being output by HDMIcompatible components, digital output signals are
muted.
• If HDMI is activated, DIGITAL OUT is muted. HDMI
audio out is related to the “DIGITAL OUT” setting.
If set to “ALL”, HDMI Audio out is follows the EDID.
If set to “PCM”, HDMI Audio out is always PCM.
• Audio is not output when the player is connected
to a device with an HDCP-compatible DVI jack.
• Audio signals are not output from DVD-Audio
discs with CPPM copyright protection when using
components that do not support HDMI standard
Ver. 1.1.
• Multi-channel and stereo audio is not output from
Super Audio CDs.
41
6
DVD Setup Menu
HDMI Audio Output
HDMI Setting (Audio)
Auto formats
Auto*
DVD
1
Multi PCM*2
2 ch PCM
Off
Dolby Digital
Dolby Digital
Multi channel PCM
2 Channel DOWNMIX
Not Output
Linear PCM
Multi channel PCM
Multi channel PCM
2 Channel DOWNMIX
Not Output
DTS
DTS
Multi channel PCM
2 Channel DOWNMIX
DVD-Audio
Multi channel PCM
Multi channel PCM
4
Left/Right
CD/MP3/Super Audio CD*
DTS CD
2 Channel DOWNMIX*
Not Output
3
DTS
Not Output
Multi channel PCM
Video CD
Not Output
2 Channel DOWNMIX
Left/Right
Not Output
Not Output
1
* : The order of priority in Auto mode is: Bit Stream, Multi PCM, 2ch PCM.
The output format is limited by the capabilities of the connected component.
*2: The order of priority in Multi PCM mode is: Multi PCM, 2ch PCM.
The output format is limited by the capabilities of the connected component.
*3: Audio is not output from discs that prohibit downmixing.
*4: Audio is not output from Super Audio CDs. Audio is only output when a CD layer is played.
SPEAKER SET UP
SPEAKER LEVEL
You can adjust the delay times (for center
and surround speakers only) and the
volume level for individual speakers. These
adjustments let you optimize the sound of
your system to best suit your surroundings
and setup.
Volume level setting for individual speakers
(–6 dB to +6 dB).
SPEAKERS LEVEL SETUP
FRONT LEFT
FRONT RIGHT
CENTER
LFE
REAR LEFT
REAR RIGHT
IMPORTANT
0dB
0dB
0dB
0dB
0dB
0dB
• Speaker settings are only available for multi-channel
audio output.
FRONT SPEAKER, CENTER SPEAKER,
REAR SP
• OFF (only for CENTER and REAR
speakers) – Select when no speakers are
connected.
• LARGE – Select if the main speaker cone
is 12 cm or more.
• SMALL – Select if the main speaker cone
is less than 12 cm.
LFE (SUBWOOFER)
• ON – Select when a subwoofer is
connected.
• OFF – Select when no subwoofer is
connected.
42
Note
• When set to 0 dB, the Audio Out level is 2 Vrms.
• When set to higher than 0 dB, the Audio Out level
of other channels falls.
• When set to lower than 0 dB, the Audio Out level
of the relevant channel falls.
EX:
FRONT
0 dB
+6 dB
-6 dB
LEFT
Other
2 Vrms
2 Vrms
1 Vrms
2 Vrms
1 Vrms
2 Vrms
6
DVD Setup Menu
AUDIO DRC
Delay time settings in relation to the listening
position/distance for individual speakers (1.0
MS to 9.0 MS).
• Default setting: OFF
This mode optimizes playback of sound at
low volume. High volume outputs will be
softened and low volume outputs will be
enhanced to an audible level. This feature
is only applicable for DVD video discs with
Dolby Digital mode.
• ON – Turns on AUDIO DRC mode.
• OFF – Turns off AUDIO DRC mode.
Select this to enjoy the sound with its full
dynamic range.
SPEAKERS DISTANCE SETUP
FRONT LEFT
FRONT RIGHT
CENTER
LFE
REAR LEFT
REAR RIGHT
3.0M
3.0M
3.0M
3.0M
3.0M
3.0M
Note
• Use a longer delay time setting when the surround
speakers are closer to the listener than the front
speakers.
English
SPEAKER DISTANCE
Note
• Audio DRC is only effective with Dolby Digital
Audio sources.
• A test tone will be automatically generated to help
you judge the sound level of each speaker.
CD UPSAMPLING
• Default setting: OFF
This feature allows you to convert your
music CD to a higher sampling rate using
sophisticated digital signal processing for
better sound quality. If you have activated
the upsampling function, the player will
automatically switch to stereo mode.
• OFF – Select this to disable CD
upsampling.
• 88.2kHz (X2) – Select this to convert
the sampling rate of CDs to twice that of
the original.
• 176.4kHz (X4) – Select this to convert
the sampling rate of CDs to four times
that of the original.
Note
• This setting is only valid for signals output from the
analog jacks.
• CD upsampling is switched to OFF, if AUDIO OUT
is set to Vsurround and 5.1CH.
• AUDIO OUT is switched to 2CH, if CD upsampling
is set to 88.2 kHz or 176.4 kHz.
43
6
DVD Setup Menu
Setting up the VIDEO SETUP page
1
Press the SETUP button.
2
Select VIDEO SETUP PAGE using the cursor
buttons (2/3), then press the ENTER
button.
3
Use the cursor buttons (5/∞) to select the
desired item, then press the cursor (3) or
ENTER button.
VIDEO SETUP PAGE
TV SYSTEM
TV ASPECT
PROGRESSIVE
PICTURE SETTING
HDMI SETUP
COMPONENT
BLACK LEVEL
CLOSED CAPTION
Note
• Press 2 to go back to the previous menu item.
Press SETUP to exit the menu.
TV SYSTEM
• Default setting: NTSC (USA model)
PAL (Europe model)
The colour system of the DVD system,
DVD and TV should match: only then will it
be possible to play a DVD on this system.
Before changing the TV system, determine
the colour system of your TV.
• PAL – Select this if the connected TV has
the PAL colour system. It will change the
video signal of an NTSC disc and output
it to PAL format.
• NTSC – Select this if the connected
TV has the NTSC colour system. It will
change the video signal of a PAL disc and
output it to NTSC format.
• MULTI – Select this if the connected TV
is compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
Select one of the options and press ENTER
to confirm.
• Follow the instructions shown on the TV
to confirm the selection (if any).
• If a blank/distorted TV screen appears,
wait for 15 seconds for the auto recovery.
44
6
DVD Setup Menu
OK
• 16:9 WIDE – Select this if you have a
wide-screen TV.
English
CHANGING PAL TO NTSC
1.ENSURE THAT YOUR TV SYSTEM SUPPORTS
NTSC STANDARD.
2.IF THERE IS A DISTORTED PICTURE
DISPLAYED ON THE TV.WAIT IS SECONDS
FOR AUTO RECOVER
CANCEL
Select one of the options and press ENTER
to confirm.
Video output format when progressive is
"ON".
Disc
Format
TV
system
NTSC
PAL
NTSC
MULTI
PAL
NTSC
MULTI
PAL
Output Format
YCbCr
Video/S-Video
PAL Progressive
NTSC
NTSC Progressive
NTSC
NTSC Progressive
NTSC
PAL Progressive
PAL
NTSC Progressive
PAL
PAL Progressive
PAL
If progressive is "OFF", Video Output Format
follow the TV SYSTEM with Interlace.
To change the TV system manually:
~ Press OPEN CLOSE 0 to open the disc tray
without HDMI connected.
Ÿ Press 3 (RIGHT) on the remote control.
! Press AUDIO on the remote control to change
the TV system setting.
PAL Æ NTSC
NTSC Æ PAL
TV ASPECT
• Default setting: 16:9 WIDE
Set the aspect ratio of the DVD system
according to the TV type you have
connected. The format you select must be
available on the disc. If it is not, the setting
for TV display will not affect the picture
during playback.
• 4:3 PAN SCAN – Select this if you have
a conventional
TV and want both
sides of the picture
to be trimmed or
formatted to fit your
TV.
• 4:3 LETTER BOX – Select this if you have
a conventional TV. In this
case, a wide picture with
black bands on the upper
and lower portions of
the TV will be displayed.
Note
• Some discs will not allow you to change the aspect
ratio.
PROGRESSIVE
• Default setting: OFF
Progressive scanning displays twice the
number of frames per second as interlaced
scanning (ordinary normal TV system).
With nearly double the number of lines,
progressive scanning offers higher picture
resolution and quality.
Before you start...
Ensure that you have connected this DVD
system to a progressive scan TV using the
YCbCr connection (see page 11 “Home
theater video connections”).
• ON – Turns on progressive scan mode.
The instruction menu appears on the TV.
ACTIVATING PROGRESSIVE SCAN:
1. ENSURE YOUR TV HAS PROGRESSIVE SCAN.
2. CONNECT USING YPBPR (GBR) VIDEO CABLE.
3. IF THERE IS A DISTORTED PICTURE, WAIT
15 SECONDS FOR AUTO RECOVERY.
OK
CANCEL
~ Press 2 to highlight “OK” in the menu and press
ENTER to confirm.
The picture on your TV will remain distorted in
this state until you turn on the progressive scan
mode on your TV.
Ÿ Turn on your TV's progressive scan mode
(refer to the user manual for your TV.)
The following menu appears on the TV.
CONFIRM AGAIN TO USE PROGRESSIVE
SCAN. IF PICTURE IS GOOD,
PRESS OK BUTTON ON REMOTE.
OK
CANCEL
45
6
DVD Setup Menu
! Press 2 to highlight OK in the menu and press
ENTER to confirm.
The set-up is complete now and you can start to
enjoy the high quality picture.
ADV PICTURE
• OFF – Disables the progressive scan
mode.
This player allows you to fine-tune the
following video parameters.
We recommend setting the aspect ratio on
your TV if the function is available.
To deactivate Progressive manually:
DCDi
~ Press OPEN CLOSE 0 to open the disc tray
without HDMI connected.
Ÿ Press 2 (LEFT) on the remote control. Press
AUDIO on the remote control.
The DVD background screen appears on the TV.
• Default setting: ON
Tip
• There are some progressive scan TVs and highdefinition TVs that are not fully compatible with
this unit, resulting in an unnatural picture when
playing back a DVD Video disc in the progressive
scan mode. In this case, turn off the progressive
scan feature on both the DVD system and your TV.
DCDi (Directional Correction Deinterlacing)
computes and tracks the angle of the screen
edge to fill in missing pixels on the TV
screen. DCDi will optimize the image quality
significantly, especially during slow motion
playback. This function is available only for
progressive scan output.
• OFF – Select to deactivate this function.
• ON – Select to activate this function.
GAMMA
PICTURE SETTING
• Default setting: STANDARD
This DVD system provides three predefined
sets of picture colour settings and one
personal setting which you can define
yourself.
• STANDARD – Original colour setting.
• BRIGHT – Vibrant colour setting.
• SOFT – Warm colour setting.
• PERSONAL – Selects this to personalize
the picture colour setting. Use the 2/3
keys to select to the setting that best
suits your personal preference and press
ENTER to confirm. For an average setting,
select 0.
• BRIGHTNESS – Increase the value to
brighten the picture or vice versa.
• SHARPNESS – Increase the value to
sharpen the picture or vice versa.
• CONTRAST – Increase the value to
sharpen the picture or vice versa.
• TINT – Increase the value to darken
the picture or vice versa.
• COLOR – Increase the value to
enhance the color in your picture or
vice versa.
46
Enables you to non-linearly adjust the intensity
of the picture. A positive value enables you to
bring out low level detail in dark scenes, while
a negative value emphasizes contrast. This
function is not available when using an HDMI
compatible component.
-7 to +7
CHROMA DELAY
The chroma (color) and luminance (brightness)
signals are not synchronized. The Chroma
Delay setting allows you to adjust the advance
delay of the chroma signal to yield a perfectly
clear picture. This function is not available
when using an HDMI-compatible component.
-3 to +3
PSCAN FORMAT
• Default setting: OFF
Set the aspect ratio of the projected images on
the screen. This function is only available for
progressive scan and HDMI video output.
• SUPER WIDE – Select this to display a
4:3 picture disc on a wide-screen TV with
non-linear stretching (the centre position
of the screen is stretched less than the
side).
• 16:9 SQUEEZE – Select this to display
a 4:3 picture disc on a widescreen TV
without stretching. Black bars will be
shown on the both sides of the TV screen.
• OFF – No aspect ratio adjustment is
made when this option is selected.
DVD Setup Menu
• Default setting: AUTO
Selects a suitable video resolution depending on the capability of the connected TV/device to
enhance the HDMI video output.
• 480P – Progressive output in 480 lines for NTSC TV
• 576P – Progressive output in 576 lines for PAL TV
• 720P – Progressive output upscaled to 720 lines
• 1080i – Interlaced output upscaled to 1080 lines
• 1080P – Progressive output upscaled to 1080 lines
• AUTO – The video output will automatically follow the display’s supported resolution
English
HDMI VIDEO
6
Note
• If no display appears on the TV due to an unsupported resolution, use the composite video cable to connect the
DVD system and your TV. Turn on your TV to the correct input channel for the composite video and adjust the
resolution setting to 480P/576P.
• The resolution can also be set with the HDMI button on the front panel.
• Pressing the HDMI button for three seconds or more toggle the HDMI on/off state (see pages 13, 14).
• In general, the larger the number, the higher the resolution.
• When the resolution is changed, the image may be corrupted or the output may take longer than normal.
• 720P/1080i/1080P only supports 60 Hz Video signal.
• When 480P/576P has been selected, multi-channel PCM at sampling frequency of 96 kHz cannot be output if the
connected TV, projector, etc. is not compatible with WCLOCK. The multi-channel PCM is converted to 48 kHz/2ch
before being output.
47
6
DVD Setup Menu
Setup Examples
Disc
Format
Video
S-Video
YCbCr
TV Aspect
PSCAN FORMAT
YCbCr
(Progressive:ON)
(Progressive:OFF)
HDMI output
Sink EDID
4:3
16:9
OFF
16:9 Wide
16:9 SQUEEZE
SUPERWIDE
16:9
4:3 LB
Dont' care
4:3 PS*1
Dont' care
4:3 PS*2
Dont' care
OFF
16:9 Wide
4:3
16:9 SQUEEZE
SUPERWIDE
4:3 LB
Dont' care
4:3 PS
Dont' care
*1: When actual video output is Pan-scan. ("TV Aspect" is 4:3panscan and disc permits Pan-scan.)
*2: When actual video output is Letterbox. ("TV Aspect" is 4:3panscan but disc does NOT permit Pan-scan.)
Video Out format when HDMI is activated
HDMI Video
Output
480P
576P
720P
1080i
1080P
48
YCbCr Output
Video/S-Video output
Progressive ON
Progressive OFF
480P (NTSC progressive)
576P (PAL progressive)
Follow the Disc Source with Interlace.
(ex: NTSC disc play: NTSC interlace)
No Video
6
DVD Setup Menu
BLACK LEVEL
Produces more dynamic picture by increasing
the picture contrast and the color intensity.
This function is available only for progressive
scan output.
• Default setting: 7.5 IRE (USA model)
0 IRE (European model)
If you set the TV type to NTSC, set the Black
level shift to 7.5 IRE. This will improve the
color contrast during playback. The black
level setting has no effect if the TV type is
set to PAL.
• 7.5 IRE – Select this to enhance the black
level.
• 0 IRE – Select this for the standard black
level setting.
0 to 5
DVI OUTPUT RANGE
• Default setting: STANDARD
When connecting the DVI unit, black may
rise to the surface depending on the display.
• ENHANCED – Image data values between
0 (black) and 255 (white)
• STANDARD – Image data values between
16 (black) and 235 (white)
COMPONENT
(Euro model only)
• Default setting: RGB
This setting allows you to toggle the output
of the video signal between RGB (on the A/V
EURO CONNECTOR) and YCbCr (on the
component).
• YCbCr – Select this for YCbCr Pr
connection on component Video out.
• RGB – Select this for the A/V EURO
CONNECTOR.
To change the COMPONENT out manually:
~ Press OPEN CLOSE 0 to open the disc tray
without HDMI connection.
Ÿ Press 3 (RIGHT) on the remote control.
! Press ANGLE on the remote control to change
the COMPONENT out.
English
DYNAMIC PICTURE
CLOSED CAPTION (USA Model only)
• Default setting: OFF
Closed captions are data hidden in the video
signals of specific discs, and are invisible
without the use of a special decoder. The
difference between subtitles and captions
is that subtitles are intended for hearing
persons and captions are for the hearing
impaired. Subtitles rarely show all of
the audio. For example, captions show
sound effects (e.g., “phone ringing” and
“footsteps”), while subtitles do not. Before
you select this function, please ensure that
the disc contains closed caption information
and your TV set also supports this function.
• ON – Select this to enable the closed
caption function.
• OFF – Select this to disable the closed
caption function.
Note
• When the player is set to YCbCr, some TV may not
properly synchronize with the player on the A/V
EURO connector.
49
6
DVD Setup Menu
Setting up the PREFERENCE page
1
Press 7 (STOP) twice to stop playback (if
any), then press SETUP.
2
Select PREFERENCE PAGE using the cursor
buttons (2/3), then press the ENTER
button.
3
Use the cursor buttons (5/∞) to select the
desired item, then press the cursor (3) or
ENTER button.
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3/JPEG NAV
VR LIST
PASSWORD
DIVX SUBTITLE
DEFAULT
Note
• Press 2 to go back to the previous menu item.
Press SETUP to exit the menu.
Using the AUDIO, SUBTITLE and DISC
MENU language
You can select your preferred language
settings for DVD playback. If the selected
language is recorded on the DVD disc, the
DVD system will automatically play the
disc in that language. Otherwise, the disc’s
default language will be used instead.
AUDIO
Selects the preferred audio language for
DVD playback.
• Default setting: ENGLISH
If the language you want is not in the list,
select OTHERS, then use the numeric
keypad (0-9) on the remote to enter the
4-digit language code “XXXX” (see page 54
“Language Codes”) and press ENTER.
SUBTITLE
Selects the preferred subtitle language for
DVD playback.
• Default setting: OFF
50
6
DVD Setup Menu
PBC
Selects the preferred disc menu language for
DVD playback.
• Default setting: ENGLISH
Use the 5/∞ keys to select a language and
press ENTER to confirm.
• Default setting: ON
The Play Back Control feature is applicable
for VCD/SVCD only. It allows you to play
Video CDs (2.0) interactively, following the
menu on the display.
• ON – The index menu (if available) will
appear on the TV when you load a VCD/
SVCD.
• OFF – The VCD/SVCD will skip the index
menu and playback directly from the
beginning.
Note
• For some discs, selection can be made using the
DVD menu. In this case, press MENU to display the
DVD menu screen and then make your selection.
English
DISC MENU
PARENTAL
• Default setting: 8 ADULT
Some DVDs may have a parental level
assigned to the complete disc or to certain
scenes on the disc. This feature lets you set a
playback limitation level.
The rating levels are from 1 to 8 and are
country dependent. You can prohibit the
playing of certain discs that are not suitable
for your children or play certain discs with
alternative scenes for certain discs.
• Default setting: WITHOUT MENU
MP3/JPEG Navigator can only be set if the
disc is recorded with a menu. It allows you
to select different display menus for easy
navigation.
• WITHOUT MENU – Displays all the files
contained in the MP3/Picture disc.
• WITH MENU – Displays the folder menu
of the MP3/Picture disc.
Note
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3/JPEG NAV
VR LIST
PASSWORD
DIVX SUBTITLE
DEFAULT
MP3/JPEG NAV
1 KID SAFE
2G
3 PG
• This DVD system can only display 650 files/folder
in the directory.
4 PG 13
5 PGR
6R
7 NC 17
8 ADULT
1
Press 5/∞ to highlight a rating level for the
disc inserted and press ENTER.
• To disable parental controls and have all
discs play, select 8 ADULT.
2
Use the numeric keypad (0-9) to enter the
six-digit password (see page 52).
• DVDs that are rated above the level you
selected will not play unless you enter the
six-digit password.
VR LIST
• Default setting: ORIGINAL LIST
There are two ways to play back a disc in VR
(Video Recording) format: ORIGINAL LIST
and PLAY LIST. This feature is not available
with non-VR format discs.
• ORIGINAL LIST – Select this to play the
originally recorded titles on the disc.
• PLAY LIST – Select this to play the
edited version of the disc. This feature is
only available when a play list has been
created.
Note
• VCD, SVCD, and CD have no level indication, so the
parental control function has no effect with these
types of discs. This also applies to most illegal DVD
discs.
• Some DVDs are not encoded with a rating even
though the movie rating may be printed on the disc
cover. The rating level feature does not work for
such discs.
51
6
DVD Setup Menu
Previewing VR format
1
During playback, press SCAN.
2
Press 5/∞ to highlight either TITLE
DIGEST or TITLE INTERVAL.
PASSWORD
The password is used for both Parental
Control and Disc Lock. Enter your six-digit
password to play a locked disc or when
prompted for a password. The default
password is “111111”. To change the password:
SELECT DIGEST TYPE
TITLE DIGEST
CHAPTER DIGEST
1
TITLE INTERVAL
CHAPTER INTERVAL
3
Press ENTER to select the function.
• TITLE DIGEST – This function will display
thumbnail pictures of titles on the screen.
Up to six thumbnail pictures per page will
be displayed.
• In ORIGINAL LIST mode, the originally
recorded titles on the disc will be
displayed.
• In PLAY LIST mode, every title in the
play list will be displayed.
• TITLE INTERVAL – This function will
divide and display the contents of each
title being played back in regular intervals,
making it easy to preview the recording.
Up to six thumbnail pictures per page will
be displayed.
• If the title being played back is short,
the TITLE DIGEST function will be
performed instead.
Press ENTER to access the change password
menu.
OLD PASSWORD
NEW PASSWORD
CONFIRM PWD
OK
2
Use the numeric keypad 0-9 on the remote
control to enter your existing six-digit
password at OLD PASSWORD.
Note
• When doing this for the first time or if you forget
your existing password, key in “111111”.
3
Enter the new six-digit password at NEW
PASSWORD.
4
Enter the new six-digit password again at
CONFIRM PWD.
5
Press ENTER to confirm and exit the menu.
DIVX SUBTITLE
You can set the font type that supports the
recorded DivX subtitle.
• Default setting: STANDARD
(example for 6 thumbnail pictures display)
4
5
Use 2/3/5/∞ to select a title, or use the
numeric buttons to enter the title number
next to SELECT.
• Press 4/¢ to access the previous/
next page.
Press ENTER to confirm the selection.
To quit the preview function
• Use 2/3/5/∞ to highlight EXIT and press
ENTER to confirm.
52
To return to the preview menu
• Use 2/3/5/∞ to highlight MENU and press
ENTER to confirm.
STANDARD
Albanian, Danish, Dutch, English, Finnish, French,
Gaelic, German, Italian, Kurdish (Latin), Norwegian,
Portuguese, Spanish and Swedish.
CYRILLIC
Bulgarian, Belorussian, Macedonian, Moldavian,
Russian, Serbian and Ukrainian.
Note
• Supported subtitle extensions for DivX are “.srt”,
“.smi”, “.sub”, “.ssa”, “.ass”.
DVD Setup Menu
This feature enables you to reset all the
setup menu options and your personal
settings to the factory defaults, except your
password for Parental Control and Disc Lock.
Press ENTER to confirm the default reset.
English
DEFAULT
6
53
7
Additional Information
Language Codes
This page is used to select other languages. This does not affect the options in AUDIO, SUBTITLE or
DISC MENU.
54
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Avestan
Aymara
Azerbaijani
Bashkir
Basque
Belarusian
Bengali
Bihari
Bislma
Bokmål, Norwegian
Bosnian
Breton
Bulgarian
Burmese
Castilian, Spanish
Catalan
Chamorro
Chechen
Chewa; Chichewa; Nyanja
Chichewa; Chewa; Nyanja
Chinese
Chuang; Zhuang
Church Slavic; Slavonic;
Church Slavonic; Church
Chuvash
Cornish
Corsican
Croatian
Czech
Danish
Dutch
Dzongkha
English
Esperanto
Estonian
Faroese
Fijian
Finnish
French
Frisian
Gaelic; Scotish Gaelic
Gallegan
Georgian
German
Gikuyu; kikuyu
Greek,
Guarani
Gujarati
Hausa
Hebrew
Herero
Hindi
Hiri Motu
Hungarian
Icelandic
6566
6565
6570
8381
6577
6582
7289
6583
6569
6589
6590
6665
6985
6669
6678
6672
6673
7866
6683
6682
6671
7789
6983
6765
6772
6769
7889
7889
9072
9065
6785
6785
6786
7587
6779
7282
6783
6865
7876
6890
6978
6979
6984
7079
7074
7073
7082
7089
7168
7176
7565
6869
7573
6976
7178
7185
7265
7269
7290
7273
7279
7285
7383
Ido
7379
Indonesian
Interlingua (International)
Interlingue
Inuktitut
Inupiaq
Irish
Italian
Japanese
Javanese
Kalaallisut
Kannada
Kashmiri
Kazakh
Khmer
Kikuyu; Gikuyu
Kinyarwanda
Kirghiz
Komi
Korean
Kuanyama; Kwanyama
Kurdish
Kwanyama; Kuanyama
Lao
Latin
Latvian
Letzeburgesch;
Limburgan; Limburger;
Limburger; Kimburgan;
Limburgish; Limburger;
Lingala
Lithuanian
Luxembourgish;
Macedonian
Malagasy
Malay
Malayalam
Maltese
Manx
Maori
Marathi
Marshallese
Moldavian
Mongolian
Nauru
Navaho; Navajo
Navajo; Navaho
Ndebele; North
Ndebele; South
Ndonga
Nepali
Northern Sami
North Ndebele
Norwegian
Norwegian Bokmål; Bokmål
Norwegian Nynork
Nyanja; Chichewa; Chewa
Nynorsk; Norwegian;
Occitan (post 1500); Proven
Old Bulgarian; Old Slavonic;
Old Church Slavonic; Old
Old Slavonic; Church
Oriya
7368
7365
7369
7385
7375
7165
7384
7465
7486
7576
7578
7583
7575
7577
7573
8287
7589
7586
7579
7574
7585
7574
7679
7665
7686
7666
7673
7673
7673
7678
7684
7666
7775
7771
7783
7776
7784
7186
7773
7782
7772
7779
7778
7865
7886
7886
7868
7882
7871
7869
8369
7868
7879
7866
7878
7889
7878
7967
6785
6785
6785
7982
Oromo
Ossetian; Ossetic
Ossetic; Ossetian
Pali
Panjabi
Persian
Polish
Portuguese
Provençal; Occitan (post)
Pushto
Quechua
Raeto-Romance
Romanian
Rundi
Russian
Samoan
Sango
Sanskrit
Sardinian
Scottish Gaelic; Gaelic
Serbian
Shona
Sindhi
Sinhalese
Slovak
Slovenian
Somali
Sotho, Southern
South Ndebele
Spanish; Castilian
Sundanese
Swahili
Swati
Swedish
Tagalog
Tahitian
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga (Tonga Islands)
Tsonga
Tswana
Turkish
Turkirnen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Walloon
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zhuang; Chuang
Zulu
7977
7983
7983
8073
8065
7065
8076
8084
7967
8083
8185
8277
8279
8278
8285
8377
8371
8365
8367
7168
8382
8378
8368
8373
8375
8376
8379
8384
7882
6983
8385
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9065
9085
Additional Information
7
Discs to avoid
When holding discs of any type, take care not to leave
fingerprints, dirt or scratches on the disc surface. Hold
the disc by its edge or by the center hole and edge.
Discs spin at high speed inside the player. If you can see
that a disc is cracked, chipped, warped, or otherwise
damaged, don't risk using it in your player. You could
end up damaging the unit.
Damaged or dirty discs can affect playback performance.
Take care also not to scratch the label side of the disc.
Although not as fragile as the recorded side, scratches
can still result in a disc becoming unusable.
English
Handling discs
This unit is designed for use with conventional, fully
circular discs only. Use of shaped discs is not recommended for this product.
Should a disc become marked with fingerprints, dust,
etc., clean using a soft, dry cloth, wiping the disc lightly
from the center to the outside edge as shown in the
diagram below.
Cleaning the pickup lens
Don’t wipe the disc surface
Wipe lightly from the
center of the disc using using circular strokes.
straight strokes.
If necessary, use a cloth moistened in alcohol, or a
commercially available CD/DVD cleaning kit to clean a
disc more thoroughly. Never use benzene, thinner or
other cleaning agents, including products designed for
cleaning vinyl records.
Storing discs
Although CDs and DVD discs are more durable than
vinyl records, you should still take care to handle and
store discs correctly. When you're not using a disc,
return it to its case and store upright. Avoid leaving discs
in excessively cold, humid, or hot environments (including
under direct sunlight).
The DVD player’s lens should not become dirty in normal
use, but if for some reason it should malfunction due to
dust or dirt, consult your nearest MARANTZ-authorized
service center. Although lens cleaners for CD players
are commercially available, we do not recommend using
them since some may damage the lens.
Problems with condensation
Condensation may form inside the player if it is brought
into a warm room from outside, or if the temperature of
the room rises quickly. Although the condensation won’
t damage the player, it may temporarily impair its performance. For this reason you should leave it to adjust
to the warmer temperature for about an hour before
switching on and using it.
Don't glue paper or put stickers onto the disc, or use
a pencil, ball-point pen or other sharp-tipped writing
instrument. These could all damage the disc.
For more detailed care information, see the instructions
that come with discs.
Do not load more than one disc into the player.
55
7
Additional Information
Hints on installation
Moving the player
We want you to enjoy using this unit for years to come,
so please bear in mind the following points when choosing a suitable location for it:
If you need to move the player, first press the POWER
ON/OFF button on the front panel to turn the player
off, then unplug the power cord. Never lift or move the
unit during playback: discs rotate at high speed and may
be damaged.
Do...
✓ Use in a well-ventilated room.
✓ Place on a solid, flat, level surface, such as a table,
shelf or stereo rack.
Don’t...
✗ Use in a place exposed to high temperatures or
humidity, including near radiators and other heatgenerating appliances.
✗ Place on a window sill or other place where the
player will be exposed to direct sunlight.
✗ Use in an excessively dusty or damp environment.
✗ Place directly on top of an amplifier, or other
component in your stereo system that becomes
hot during use.
✗ Use near a television or monitor as you may experience interference, especially if the television
uses an indoor antenna.
✗ Use in a kitchen or other room where the player
may be exposed to smoke or steam.
✗ Use on a thick rug or carpet, or cover with cloth:
this may prevent proper cooling of the unit.
✗ Place on an unstable surface, or one that is not
large enough to support all four of the unit’s feet.
56
Precautions on using the power cord
Handle the power cord by the plug part. Do not pull
out the plug by tugging the cord, and never touch the
power cord when your hands are wet, as this could
cause a short circuit or electric shock. Do not place the
unit, a piece of furniture, or other object on the power
cord or pinch the cord in any other way. Never make a
knot in the cord or tie it with other cords. The power
cords should be routed so that they are not likely to
be stepped on. A damaged power cord can cause a fire
or give you an electric shock. Check the power cord
once in a while. If you find it damaged, ask your nearest
MARANTZ authorized service center or your dealer for
a replacement.
Additional Information
Incorrect operation is often mistaken for
trouble or malfunction. If you think that
there is something wrong with this unit,
check the points below. Sometimes the
trouble may lie in another component.
Inspect the other components and
electrical appliances being used. If
the trouble cannot be rectified after
checking the items below, ask your
nearest MARANTZ authorized service
center or your dealer to carry out repair
work.
The disc is ejected automatically after loading.
•
Dirty or damaged disc.
•
Disc not seated properly in the disc guide.
•
Incompatible region number.
Settings are canceled.
•
Before unplugging the power cord, press the POWER
button on the Remote Control and check that
STANDBY indicator on the front panel is lit, then
press POWER ON/OFF on the front panel to turn the
player off.
No picture/No color.
•
•
TV/monitor or AV amplifier settings are incorrect.
Check the instruction manual of the connected
equipment.
•
The PROGRESSIVE menu is set to ON but your TV/
monitor is not compatible with progressive scan.
Reconnect the player to your TV using a composite
or S-Video cord and set the TV to the appropriate
input. Now choose the Interlace setting in the
PROGRESSIVE menu, then switch the TV input back
to the component input. (page 45)
Align the disc properly.
•
Incorrect video connections.
Check that connections are correct and that plugs are
inserted fully.
See page 55 for disc care information.
If the region number on a DVD-Video disc does not
match the number on the player, the disc cannot be
used (page 9).
When the power is cut due to a power failure or by
unplugging the power cord, settings will be canceled.
English
Troubleshooting
7
Screen is stretched or aspect does not change.
•
Condensation inside the player.
The TV ASPECT setting in the Setup menu is incorrect.
Set the TV ASPECT option to match the TV/monitor
you're using (page 45).
Allow time for condensation to evaporate. Avoid using
the player near an air-conditioning unit.
Picture disturbance during playback or dark.
Playback is not possible.
•
•
This player is compatible with Macro-Vision System copy
guard. Some discs include a copy prevention signal, and
when this type of disc is played back, stripes etc., may
appear on some sections of the picture depending on the
TV. This is not a malfunction.
•
Discs respond differently to particular player functions.
This may result in the screen becoming black for a brief
instant or shaking slightly when the function is executed.
Disc is loaded upside down.
Reload the disc with the label side face-up.
Cannot play DVD-R/RW disc.
•
Only a DVD-R/RW disc that has been finalized only can be
played.
These problems are largely due to differences between
discs and disc content and are not malfunctions of this
player.
mark appears on the screen.
•
The operation is prohibited by the player.
•
The selected function does not operate for that disc.
•
If your TV is connected using the COMPONENT
VIDEO OUT jacks, set the PROGRESSIVE menu to
OFF (page 45).
Picture playback stops and the operation buttons can
not be used.
•
Press 7 (STOP), then start playback again 3 (PLAY).
•
Switch the power off once using the front panel POWER
ON/OFF and then switch on again using the front panel
POWER ON/OFF.
New settings made in the Setup screen menus while a
disc is playing are ineffective.
•
When using progressive-scan
When recorded on a VCR or passed through an AV
selector, there is disturbance in the playback picture.
•
Due to the player’s copy protection circuits, connection
of this device through a VCR or an AV selector may
prevent recording or cause picture problems. This is not a
malfunction.
Some settings can be changed while a disc is playing, but
do not take effect until the disc is stopped then restarted.
This is not a malfunction.
Make the same setting when the player is stopped.
Press 7 (STOP), then restart playback 3 (PLAY).
Note that making settings in the Setup screen menus
may cancel the RESUME function.
57
7
Additional Information
The remote control doesn't seem to work.
Noticeable difference in DVD and CD volume.
•
•
The remote control is too far from the player, or the angle
with the remote sensor is too wide.
Use the remote control within its operating range (page
7).
•
Cannot output 192 kHz or 176.4 kHz digital audio.
The player does not output digital audio at these sampling
rates.
The batteries are exhausted.
Put in new batteries (page 7).
Cannot listen to high-sampling rate audio through the
digital output.
•
•
LPCM Out is set to 48 kHz.
Set it to 96 kHz.
As a copy-protection measure, some DVDs do not output
96 kHz audio.
In this case, even if 96 kHz is selected, the player
automatically outputs the audio at 48 kHz. This is not
a malfunction.
Cannot output 96 kHz or 88.2 kHz digital audio.
•
Check that the LPCM OUT setting is not set to 48 kHz
(page 41).
•
Some discs are digital copy-protected and do not output
high sampling rate digital audio.
No DTS audio output.
•
If this unit is connected to a non-DTS compatible amplifier
or decoder using a digital audio cable, set DIGITAL OUT
to PCM in the Setup menu. If you do not do this, noise
will be output if you try and play a DTS disc.
•
If this unit is connected to a DTS-compatible amplifier or
decoder using a digital audio cable, check the amplifier
settings, and that the cable is properly connected.
No audio, or audio is distorted.
•
•
•
•
•
•
•
•
Some DVD discs do not output digital audio.
Switch your amplifier to the player's analog outputs.
Dirt, dust, etc. on the disc.
Clean the disc (page 55).
Interconnectors are not fully inserted into the terminals (or
are not connected).
Check that all interconnectors are firmly inserted.
Dirty or oxidized plugs/terminals.
Clean the plugs/terminals.
Incorrect audio cable connection.
Check the audio connections (pages 10 to 12).
Player's output is connected to the amplifier's phono
(turntable) inputs.
Connect to any set of inputs except phono.
The disc is paused.
Press 3 (PLAY) to exit the pause mode.
Incorrect amplifier settings.
Check that the volume is turned up, that the speakers
are on, the input function set correctly, etc.
The analog audio is OK, but there appears to be no
digital audio signal.
•
58
Incorrect AUDIO SETUP menu settings.
Make sure that the DIGITAL OUT setting is set to ALL
or PCM (page 41).
Check the amp's instruction manual.
DVDs and CDs use different recording methods. This is
not a malfunction.
Additional Information
•
If the disc is a recordable CD, make sure that the disc had
been finalized.
Check that the track(s) are in the MPEG1 Audio Layer
3 format.
English
A disc containing the MP3 tracks won’t play.
7
Some MP3 tracks appear to be missing from a disc.
•
If a track name does not end in “.mp3” or “.MP3”, this
player will not recognize it as an MP3 track.
•
This player only recognizes about 650 files per folder and
300 folders per disc. If there are more titles than this, you
will not be able to play them.
•
This player is not compatible with multi-session discs.
If the disc is multi-session, you will only be able to play
tracks recorded onto the first session.
The unit is connected to an HDMI/DVI component but
the HDMI/DVI indicator on the display does not light.
•
Set the input selector on the connected TV or HDMI/DVI
component to this unit.
•
This unit cannot be connected to TVs or HDMI/DVI
components that do not support HDCP.
•
Reset this unit and the TV or HDMI/DVI component by
turning them off and on.
No video appears on the connected HDMI/DVI
component.
•
Can the connected TV or HDMI/DVI component use the
selected resolution?
•
Set the input selector on the connected TV or HDMI/DVI
component to this unit.
•
TVs or HDMI/DVI components that do not support HDCP
cannot output video from this unit.
Set the HDMI VIDEO under HDMI Setup. (page 47)
No audio is coming from the connected HDMI
component.
•
The unit will not output an audio signal if Audio has been
turned off under HDMI AUDIO OUT Setup. (page 41)
•
Some HDMI-compatible monitors do not support audio
output.
•
The unit will not output an audio signal if a DVI
component has been connected.
Unable to play DivX movies.
•
Check that the DivX files are encoded with “Home
Theater's mode with DivX” certified encoder.
No sound during DivX movies playback.
•
The audio codes may not be supported by the DVD player.
A DivX movie does not repeat.
•
Check that file size of the movies does not exceed the file
size of the CD disc during burning.
59
7
Additional Information
21-pin connector assignment
(Europe model only)
AV connector output ........................ 21-pin connector
This connector provides the video and audio signals
for connection to a compatible color TV or monitor.
Specifications
General
System
DVD-Video, DVD-Audio, DVD±R/RW, Super Audio
CD, Video CD, CD, MP3 files, JPEG files, DivX and
WMA
Power requirements (U.S.A.).................... 120 V, 60Hz
Power requirements (Europe) ...........230 V, 50/60Hz
Power consumption................................................. 27 W
Power consumption in standby mode................0.8 W
Weight.............................................. 7.3 kg (16 lb 15 oz)
Dimensions ...........440 (W) x 128 (H) x 332 (D) mm
(17.3 (W) x 5 (H) x 13.1 (D) in.)
Operating temperature
............................ +5 °C to +35 °C (+41 °F to +96 °F)
Operating humidity
.................................... 5 % to 85 % (no condensation)
20 18 16 14 12 10 8 6 4 2
21 19 17 15 13 11
PIN no.
1
Audio 2/R out
3
Audio 1/L out
4
GND
7
B out
8
Status
11 G out
S-Video output
Y (luminance) - Output level ...............1 Vp-p (75 Ω)
C (color) - Output level................286 mVp-p (75 Ω)
Jacks..............................................................S-VIDEO jack
9 7 5 3 1
15
16
17
19
21
R out
Blank
GND
Video out
GND
Audio output
Output level
During audio output................... 2 Vrms (1kHz, 0 dB)
Number of channels ..................................................2/6
Jacks .................................................................... RCA jack
Video output
Output level ............................................1 Vp-p (75 Ω)
Jacks .................................................................... RCA jack
Audio characteristics
Frequency response
............................... 4 Hz to 44 kHz (DVD fs: 96 kHz)
S/N ratio .............................................................. 120 dB
Dynamic range ..................................................... 110 dB
Total harmonic distortion ........................... 0.0008 %
Wow and flutter: Limit of measurement (±0.001 % W.
PEAK) or lower
Component video output (Y, CB, CR)
Output level.....................................Y: 1.0 Vp-p (75 Ω)
CB/PB, CR/PR: 0.7 Vp-p (75 Ω)
Jacks .................................................................. RCA jacks
HDMI output
Output terminal .................................................... 19-pin
Digital output
Coaxial digital output......................................RCA jack
Optical digital output................... Optical digital jack
Other terminals
Control in/out...................................................RCA jack
Flasher input...................................... Mini jack (3.5ø)
RS232C ........................................................................... 1
322
332
6
Accessories
Remote control .............................................................. 1
AAA/R03 dry cell batteries ......................................... 2
Audio/Video cable (yellow/red/white) .................... 1
System control cable .................................................... 1
Power cable..................................................................... 1
User Guide (this manual)
Warranty card (USA only)
Note: The specifications and design of this product are
subject to change without notice, due to improvement.
4
(mm)
128
18
110
440
60
Additional Information
7
English
61
Printed in China
2007/03
PMC
00M30AK851250