electrolux integrated barbecue contents i
Electrolux Home Products
Australia
telephone: 1300 363 640
fax:
1800 350 067
email:
customercare@electrolux.com.au
web:
www.electrolux.com.au
New Zealand
telephone: 09 573 2230
fax:
0800 36 36 00
email:
customercare@electrolux.co.nz
web:
www.electrolux.co.nz
Congratulations
Congratulations and thank you for choosing our integrated
barbecue. We are sure you will find your new barbecue
a pleasure to use. Before you use the barbecue, we
recommend that you read through the entire user manual,
which provides the description of the barbecue and its
functions.
To avoid the risks that are always present when you use
a gas appliance, it is important that it is installed correctly
and that you read the safety instructions carefully to avoid
misuse and hazards.
We recommend that you keep this instruction booklet for
future reference and pass it on to any future owners.
After unpacking the barbecue please check it is not
damaged. If in doubt, do not use the appliance but contact
your local Electrolux Customer Care Centre.
The Thoughtful Design Innovator.
Do you remember the last time you opened a gift that made you say “Oh! How did you know?
That’s exactly what I wanted!” That’s the kind of feeling that the designers at Electrolux seek to
evoke in everyone who chooses or uses one of our products. We devote time, knowledge, and a
great deal of thought to anticipating and creating the kind of appliances that our customers really
need and want.
This kind of thoughtful care means innovating with insight. Not design for design’s sake, but design
for the user’s sake. For us, thoughtful design means making appliances easier to use and tasks more
enjoyable to perform, freeing our customers to experience that ultimate 21st century luxury, ease
of mind. Our aim is to make this ease of mind more available to more people in more parts of their
everyday lives, all over the world. So when we say we’re thinking of you, you know we mean just that.
Contents
• Product description
• Parts
• Important safety instructions
• Assembling the barbecue
• Gas specifications
• Gas connection detail
• Natural Gas installation
• Universal LPG installation
• Gas bottle safety information
• Leak test procedure
• Installation warnings
• Installation instructions
• Dimensions
• Gas requirements
• Setting up the barbecue
• Fitting the slimline lid or roasting hood
• Options for configuration of hotplates and grills
• Operating instructions
• Lid safety lid – slimline lid only
• Cleaning and care
• Maintenance
• Troubleshooting
• Warranty
The “Thinking of you” promise from Electrolux goes beyond meeting the needs of today’s consumers.
It also means we’re committed to making appliances safe for the environment—now and for future
generations.
Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com.au or www.electrolux.co.nz
ii
iii
1
2
3
3
3
4
5
5
6
6
7
8
8
8
9
9
10
10
11
11
12
environmental tip
Information on disposal for users
P/No. 0616001937 - Rev A
© Copyright 2010 Electrolux Home Products Pty Ltd
ABN 51 004 762 341
Print code: EINTBBQUM_Aug 10
user manual
integrated barbecue
(EQBL100AS and EQBH100AS)
• Most of the packing materials are recyclable. Please
dispose of those materials through your local recycling
depot or by placing them in appropriate collection
containers.
• If you wish to discard this product, please contact your
local authorities and ask for the correct method of disposal.
ii product description electrolux integrated barbecue
electrolux integrated barbecue parts iii
Integrated barbecue with slimline lid
Parts
Contents of your barbecue pack:
description
qty
description
Burner box &
trim surround
1
Natural gas
regulator and
braided hose
Rear heat
shield
1
Universal LPG 1
regulator and
braided hose
1
2
qty
1
1 Pivotting leg
3
2 Slimline lid
3 Battery cover
4
5
6
7
4 Gas connection point
5 Burner controls
Flame tamers 2
6 Grill assemblies x 2 sets
7 Hotplate
8Removable oil reservoir
located at front of cooking
surface (not illustrated)
1 plastic bag containing this instruction book,
labels, 4 ULPG injectors, allen key, ULPG adaptor,
2 fibre washers, natural gas installation pipe,
match holder and chain
EITHER
9Flame tamers x 2 located
under grills (not illustrated)
Integrated barbecue with roasting hood
left
right
Oil reservoirs
(1 x left hand
and 1 x right
hand)
1 LH
1 RH
Roasting
hood
assembly
1
Slimline lid
assembly
1
OR
Solid hot plate 1
10
10 Roasting hood
11
11 Warming racks
12 Battery cover
13 Gas connection point
12
14 Burner controls
15 Grill assembly
13
16 Hotplate
14
17Removable oil reservoir
located at front of cooking
surface (not illustrated)
15
15
16
18Flame tamers x 2 located
under grills (not illustrated)
Grill
assemblies
2
Tools you will need for assembly:
• philips head screw driver
electrolux integrated barbecue contents i
Electrolux Home Products
Australia
telephone: 1300 363 640
fax:
1800 350 067
email:
customercare@electrolux.com.au
web:
www.electrolux.com.au
New Zealand
telephone: 09 573 2230
fax:
0800 36 36 00
email:
customercare@electrolux.co.nz
web:
www.electrolux.co.nz
Congratulations
Congratulations and thank you for choosing our integrated
barbecue. We are sure you will find your new barbecue
a pleasure to use. Before you use the barbecue, we
recommend that you read through the entire user manual,
which provides the description of the barbecue and its
functions.
To avoid the risks that are always present when you use
a gas appliance, it is important that it is installed correctly
and that you read the safety instructions carefully to avoid
misuse and hazards.
We recommend that you keep this instruction booklet for
future reference and pass it on to any future owners.
After unpacking the barbecue please check it is not
damaged. If in doubt, do not use the appliance but contact
your local Electrolux Customer Care Centre.
The Thoughtful Design Innovator.
Do you remember the last time you opened a gift that made you say “Oh! How did you know?
That’s exactly what I wanted!” That’s the kind of feeling that the designers at Electrolux seek to
evoke in everyone who chooses or uses one of our products. We devote time, knowledge, and a
great deal of thought to anticipating and creating the kind of appliances that our customers really
need and want.
This kind of thoughtful care means innovating with insight. Not design for design’s sake, but design
for the user’s sake. For us, thoughtful design means making appliances easier to use and tasks more
enjoyable to perform, freeing our customers to experience that ultimate 21st century luxury, ease
of mind. Our aim is to make this ease of mind more available to more people in more parts of their
everyday lives, all over the world. So when we say we’re thinking of you, you know we mean just that.
Contents
• Product description
• Parts
• Important safety instructions
• Assembling the barbecue
• Gas specifications
• Gas connection detail
• Natural Gas installation
• Universal LPG installation
• Gas bottle safety information
• Leak test procedure
• Installation warnings
• Installation instructions
• Dimensions
• Gas requirements
• Setting up the barbecue
• Fitting the slimline lid or roasting hood
• Options for configuration of hotplates and grills
• Operating instructions
• Lid safety lid – slimline lid only
• Cleaning and care
• Maintenance
• Troubleshooting
• Warranty
The “Thinking of you” promise from Electrolux goes beyond meeting the needs of today’s consumers.
It also means we’re committed to making appliances safe for the environment—now and for future
generations.
Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com.au or www.electrolux.co.nz
ii
iii
1
2
3
3
3
4
5
5
6
6
7
8
8
8
9
9
10
10
11
11
12
environmental tip
Information on disposal for users
P/No. 0616001937 - Rev A
© Copyright 2010 Electrolux Home Products Pty Ltd
ABN 51 004 762 341
Print code: EINTBBQUM_Aug 10
user manual
integrated barbecue
(EQBL100AS and EQBH100AS)
• Most of the packing materials are recyclable. Please
dispose of those materials through your local recycling
depot or by placing them in appropriate collection
containers.
• If you wish to discard this product, please contact your
local authorities and ask for the correct method of disposal.
ii product description electrolux integrated barbecue
electrolux integrated barbecue parts iii
Integrated barbecue with slimline lid
Parts
Contents of your barbecue pack:
description
qty
description
Burner box &
trim surround
1
Natural gas
regulator and
braided hose
Rear heat
shield
1
Universal LPG 1
regulator and
braided hose
1
2
qty
1
1 Pivotting leg
3
2 Slimline lid
3 Battery cover
4
5
6
7
4 Gas connection point
5 Burner controls
Flame tamers 2
6 Grill assemblies x 2 sets
7 Hotplate
8Removable oil reservoir
located at front of cooking
surface (not illustrated)
1 plastic bag containing this instruction book,
labels, 4 ULPG injectors, allen key, ULPG adaptor,
2 fibre washers, natural gas installation pipe,
match holder and chain
EITHER
9Flame tamers x 2 located
under grills (not illustrated)
Integrated barbecue with roasting hood
left
right
Oil reservoirs
(1 x left hand
and 1 x right
hand)
1 LH
1 RH
Roasting
hood
assembly
1
Slimline lid
assembly
1
OR
Solid hot plate 1
10
10 Roasting hood
11
11 Warming racks
12 Battery cover
13 Gas connection point
12
14 Burner controls
15 Grill assembly
13
16 Hotplate
14
17Removable oil reservoir
located at front of cooking
surface (not illustrated)
15
15
16
18Flame tamers x 2 located
under grills (not illustrated)
Grill
assemblies
2
Tools you will need for assembly:
• philips head screw driver
ii product description electrolux integrated barbecue
electrolux integrated barbecue parts iii
Integrated barbecue with slimline lid
Parts
Contents of your barbecue pack:
description
qty
description
Burner box &
trim surround
1
Natural gas
regulator and
braided hose
Rear heat
shield
1
Universal LPG 1
regulator and
braided hose
1
2
qty
1
1 Pivotting leg
3
2 Slimline lid
3 Battery cover
4
5
6
7
4 Gas connection point
5 Burner controls
Flame tamers 2
6 Grill assemblies x 2 sets
7 Hotplate
8Removable oil reservoir
located at front of cooking
surface (not illustrated)
1 plastic bag containing this instruction book,
labels, 4 ULPG injectors, allen key, ULPG adaptor,
2 fibre washers, natural gas installation pipe,
match holder and chain
EITHER
9Flame tamers x 2 located
under grills (not illustrated)
Integrated barbecue with roasting hood
left
right
Oil reservoirs
(1 x left hand
and 1 x right
hand)
1 LH
1 RH
Roasting
hood
assembly
1
Slimline lid
assembly
1
OR
Solid hot plate 1
10
10 Roasting hood
11
11 Warming racks
12 Battery cover
13 Gas connection point
12
14 Burner controls
15 Grill assembly
13
16 Hotplate
14
17Removable oil reservoir
located at front of cooking
surface (not illustrated)
15
15
16
18Flame tamers x 2 located
under grills (not illustrated)
Grill
assemblies
2
Tools you will need for assembly:
• philips head screw driver
electrolux integrated barbecue important safety instructions 1
Important safety instructions
Please read the user manual carefully and store in a handy
place for later reference.
Meanings of the symbols used in this manual are shown below:
warning
This symbol indicates information concerning your
personal safety
caution
This symbol indicates information on how to avoid
damaging the appliance
tips and information
This symbol indicates tips and information about use
of the appliance
environmental tip
This symbol indicates tips and information about
economical and ecological use of the appliance
This symbol indicates never to do this
For your safety please read this book before operating
your barbecue.
warning
This appliance MUST be installed and serviced only
by a qualified licensed person.
Improper installation, adjustment alteration or
maintenance can cause injury or property damage.
Please contact your nearest Electrolux Service
Department for additional information or assistance
for an approved installer.
NOTE TO THE INSTALLER
THIS MANUAL MUST REMAIN WITH THE OWNER FOR
FUTURE REFERENCE
warning
IF YOU SMELL GAS, do not attempt to light the
barbecue. Locate the leak and re-tighten the leaking
joint. Carry out the Leak Test procedure as described in
this manual. If the leak persists, turn off the gas supply
and call Electrolux Service or a Licensed Gas Fitter.
warning
Do not lean over barbecue when lighting.
Do not leave the barbecue unattended when alight.
Do not delay lighting once the gas has been turned
on.
Do not store or use aerosol cans in the vicinity of the
barbecue.
Do not store flammable liquids in the vicinity of the
barbecue.
o not use caustic or abrasive based cleaners on the
D
barbecue.
Do not operate the barbecue with the cover on.
Do not attempt to dismantle or adjust the control
valves.
Do not attempt to dismantle or adjust the regulator.
Do not test for leaks with a naked flame.
Do not modify the construction of this appliance or
modify the injector orifice size.
Do not obstruct any ventilation of the barbecue.
Do not allow children to operate or play near the
barbecue.
caution
This barbecue is supplied set up for Natural Gas and
is labelled accordingly. A Universal LPG conversion
kit is included if required. Conversion of this unit
to Universal LPG must be carried out by a qualified
licensed person and a Certificate of Compliance
must be issued to the owner on completion of the
installation and conversion.
2 assembling electrolux integrated barbecue
Assembling the barbecue
1. Remove all components from box.
2.Attach heat shield to rear of unit by inserting the three
top tabs into the rear holes and sliding the shield down.
5.Place hotplate and grill sections into desired positions
ensuring that the flame tamers are under grill sections
NOTE ensure that grill assemblies are orientated
correctly so that the surface of the grill is sloping
forward to allow oil to drain into oil reservoirs.
3. Position flame tamers into desired locations (under
where grill sections will be fitted) and fix back edge of
the flame tamer into rear of barbecue body.
assembled grill
back
front
4.Fit left and right hand oil reservoirs at front of barbecue.
6.After installation in bench, attach slimline lid or roasting
hood as described in “Fitting the slimline lid or roasting
hood” section of this manual.
electrolux integrated barbecue gas specifications/natural gas installation 3
Gas specifications
Natural Gas installation
gas type
natural gas
universal LPG
Maximum gas consumption
50 MJ/hr
50 MJ/hr
Injector orifice diameter
1.75mm
0.95mm
Number of injectors
4
4
Regulator pressure
1.00 kPa
2.75 kPa
Notes
• This appliance MUST be installed and serviced only by
a qualified licensed person.
•This product is intended for outdoor use only.
•This product must be installed as per the instructions
which requires the installation of venting to enable
the barbecue to operate correctly. Failure to provide
adequate ventilation for supply of air to the appliance
may result in poor burner performance or excessive
heat build-up within the mounting enclosure.
•Ventilation holes in the unit must not be obscured by
the installation.
Preparing the unit for Natural Gas installation
This barbecue is supplied set up for Natural Gas and is
labelled accordingly. A Universal LPG conversion kit is
included if required. Conversion of this unit to Universal LPG
must be carried out by a qualified licensed person.
A Certificate of Compliance must be issued to the owner on
completion of the installation and conversion.
Fit Natural Gas installation pipe to the barbecue gas inlet to
enable access to the regulator in the installed position.
When tightening the regulator or any other connection do
not over-tighten.
1. Fitting the Natural Gas installation pipe
• Fit the pipe ensuring the blue sealing washer is in
place. Do not over-tighten.
2. Fitting the regulator
• Fit the regulator ensuring the blue sealing washer
is in place and the arrow indicating gas flow is
correct. Do not over-tighten.
3.Fit the hose
• Apply thread tape or sealant to the male thread on
the hose and screw into the regulator. Do not overtighten.
Gas connection detail
137mm
barbecue gas inlet
408mm
sealing washer
Natural Gas
installation pipe
46mm
sealing washer
regulator – ensure
arrow is pointing in
the right direction
hose with tapered
thread – thread tape
required
4. Fit to mains
• Connect the bayonet end to mains
Preparing the unit for Natural Gas connection to
mains
For Natural Gas connection a bayonet connection point
should be installed by a licensed gas fitter prior to installing
the barbecue unit.
4 universal LPG installation electrolux integrated barbecue
Universal LPG installation
Preparing the unit for Universal LPG installation.
This barbecue is supplied set up for Natural Gas and is
labelled accordingly. A Universal LPG conversion Kit is
included to enable conversion to Universal LPG.
NOTE
Conversion of this unit to Universal LPG must be carried
out by a qualified licensed person and a Certificate of
Compliance must be issued to the owner on completion of
the installation and conversion.
The required components for conversion have been
supplied. The components are:
• Hose and regulator assembly
• Small plastic bag containing 4 brass injectors
• 1 Universal LPG sticker
• 1 test point adaptor
• 1 sealing washer
1. Change the injectors
• Remove the front cover.
• Release the burner retainer clip as shown.
remove spring clip
by rotating over
burner tube end
2.
Adjust the turndown setting on the valve
• If fitted, remove the knobs from the valves.
• Remove rubber grommets from control panel holes.
• Adjust the turndown screw fully clockwise on each
of the 4 valves using a small flat blade screwdriver.
The valve is now set correctly for LPG operation (see
diagram).
turndown screw
3.Connect the test point adaptor to the barbecue gas inlet
• Fit the test point adaptor ensuring the blue sealing
washer is in place and the arrow is pointing in the
direction of gas flow. Do not over-tighten.
4.Connect the hose to the test point adaptor
• Apply thread tape or sealant to the male thread on
the hose and screw into the test point adaptor.
barbecue gas inlet
sealing washer
test point adaptor –
ensure arrow is pointing
in the right direction
hose with tapered thread
– thread tape required
front cover
•
nscrew and replace the 4 injector nipples located
U
in the end of each tube feeding the burners. The
Universal LPG injectors have a 0.95mm diameter
orifice in them. They appear substantially smaller
than the Natural Gas injectors.
LPG injector
•
•
Re-fasten the clip to retain the tube in the burner.
Do not over tighten or distort supply tube.
Fit the front cover back on and fasten screws.
5. Replace the ‘gas type’ sticker
• Locate the ‘Natural Gas’ sticker located on the
barbecue gas inlet and remove it. Put the Universal
LPG sticker in its place.
electrolux integrated barbecue electronic display controls – electronic models 5
Gas bottle safety information
Leak test procedure
• T
his appliance once converted to use Universal LPG is
designed to use a 9kg (20 lbs) gas cylinder.
• The gas cylinder must be made and marked in
accordance with specifications for LPG cylinders
• The isolation valve must be turned off when the
appliance is not in use.
• Gas cylinders must be stored in an approved housing
out of reach of children.
• When disconnecting the gas bottle ensure that all the
control valves are in the ‘OFF’ position.
• Remove the bottle from any housing in which it may be
stored before disconnection.
• When reconnecting the hose to the bottle, ensure that
all connections are tight before replacing in the storage
compartment.
• Carry out a leakage check as detailed below after each
reconnection.
• E
nsure all gas valves are in the ‘OFF’ position.
• In a small container, mix a solution of water and
detergent or soap.
• After connection of the hose, turn on the valve at the
gas bottle or mains as appropriate.
• Using a brush apply the solution to the gas connection
points and look for bubbles forming.
• Bubbling will indicate a leak.
• Turn off the valve and re-tighten the joint. Repeat the
leak test.
• If the leak persists, turn of the gas at the isolation valves
and contact a licensed gas fitter to correct.
Leak test
points
Check hose
for signs of
abrasions,
cracks or leaks
6 installation warnings/installation instructions electrolux integrated barbecue
Installation warnings
Installation instructions
warning
• T
his appliance shall only be used in an above ground,
open air situation with natural ventilation without
stagnant areas, where gas leakage and product of
combustion are rapidly dispersed by wind or natural
convection. This barbecue has been designed for
outdoor use only. Refer to diagrams below.
• Never install this barbecue inside any building, garage,
shed or breezeway or inside a boat, caravan or
recreational vehicle. This is to prevent the possibility of
fire or carbon monoxide poisoning or asphyxiation.
• Any enclosure in which this appliance is installed shall
comply with one of the following:
– An enclosure with walls on all sides, but at least
one permanent opening at the ground level and no
overhead covering.
– Within a partial enclosure that includes an overhead
cover and no more than 2 walls.
– Within a partial enclosure that includes an overhead
cover and more than 2 walls, the following shall apply:
– at least 25% of the total wall area is completely
open and at least 30% of the remaining wall area
is open and unrestricted
• In the case of balconies, at least 20% of the total of
the side, back and front wall areas shall be and remain
open and unrestricted.
Outdoor area example 1
Outdoor area example 2
both ends
open
warning
Outdoor area example 4
30% or more
in total of the
remaining wall
area is open and
unrestricted
Outdoor area example 5
open side at
least 25% of
total wall area
The mounting enclosure
• The barbecue requires a non-combustible barrier under
the barbecue to prevent excessive temperatures being
accessed. The barrier panel is to be placed 30mm
under the base of unit. There are spacers added to
bottom of unit to prevent barrier panel being too close
to barbecue base. Refer to diagram on next page.
• The mounting enclosure must be constructed from
non-combustible materials. Suitable materials for
construction include masonry, granite, marble,
Hardiplank® , Villaboard® over a metal frame or tiles.
• This appliance requires venting in the front wall of the
enclosure. See diagram below for details.
• This appliance can be mounted either in an island type
bench or a bench with a splashback. Please read the
specific requirements for each mounting situation.
Island style installation
• If this appliance is installed in an island mount, it can be
centrally positioned. Special attention should be given
to the overall size of the island top to consider the hood
open and the overhang. Please see below.
• The cut-out size required is 1025mm x 502mm (see
diagram).
Outdoor area example 3
open side at
least 25% of
total wall area
Choosing a location
• This appliance must not be installed on any combustible
material. A minimum clearance from any combustible
materials is 450mm (18”).
• The vertical clearance above the cooking surface to any
combustible materials must be at least 600mm.
• This appliance must be installed accordance with
Australian Standards AS 4557 and AS 5601 and in
accordance with local authority.
• When using LPG in an enclosure ventilation must be
provided. Gas is highly explosive and can cause serious
injury and damage to property if allowed to accumulate
and then be ignited.
• This barbecue is intended to be built into a bench top
with a minimum depth of 600 mm.
• Avoid windy positions as this will affect cooking
performance and burner efficiency. If this situation
cannot be avoided some shielding may be necessary.
30% or more
in total of the
remaining wall
area is open and
unrestricted
• T
his appliance requires venting. An open area as
indicated below must be allowed for. A suitable grille can
be fitted if desired. This vent area is to allow air into the
enclosure for the correct combustion of gases and for
the correct exhausting of the products of combustion. In
the case of LPG the gas is heavier than air, this vent in
the situation where there may be a leak allows the gas to
escape from the enclosure. This vent must be
700mm x 25mm minimum and positioned centrally
135mm below the mounting surface. (see diagram).
Installing in a bench with a splashback
• The splashback must be made from a non-combustible
material.
• In the case of mounting this appliance against a wall
or fence it is imperative that care be taken to ensure
the isolation of combustible materials. All combustible
materials must be kept 450mm away from the
barbecue.
electrolux integrated barbecue installation instructions/dimensions 7
• T
he minimum width of the mounting surface is 600mm
• The cut-out size required is 1025mm x 502mm
(see diagram).
• For roasting hood models there is a specific clearance
required at the back of the barbecue between the
splashback and the bench cut-out of 73mm minimum.
This is to allow clearance for the hood to open.
warning
• T
his appliance requires venting. An open area as
indicated below must be allowed for. A suitable grille can
be fitted if desired. This vent area is to allow air into the
enclosure for the correct combustion of gases and for
the correct exhausting of the products of combustion. In
the case of LPG the gas is heavier than air, this vent in
the situation where there may be a leak allows the gas to
escape from the enclosure. This vent must be
700mm x 25mm minimum and positioned centrally
135mm below the mounting surface. (see diagram).
589mm
562mm
538mm
wall
wall
Dimensions
453mm 601mm
bench width 600mm min.
211mm
553mm
42mm
bench
bench
bench
bench
25mm
464mm
56mm
177mm
177mm
73mm min.
from cut-out
25mm
73mm min.
cut-out
minimum clearance tofrom
back
wall
minimum clearance to back wall
464mm
925mm
943mm
553mm
526mm
538mm
538mm
1058mm
1058mm
splashback
600mm min.
135mm
600mm min.
1025mm cut-out
135mm
1025mm x 502
cut-out
502mm
cut-out
25mm
700mm
Island style installation
(example shown with barbecue with slimline line)
1025mm cut-out
1025mm x 502
cut-out
502mm
cut-out
25mm
700mm
Installation in a bench with splashback
(example shown with barbecue with roasting hood)
8 gas requirements/setting up the barbecue/fitting the lid or hood electrolux integrated barbecue
Gas requirements
Fitting the slimline lid or roasting hood
Natural Gas requirements
• The enclosure must be constructed so that access can
be gained to the Natural Gas regulator at all times.
• For Natural Gas the gas supply is required to be
connected to 1.2m flexible hose supplied and therefore
must be located within this distance
• The flexible hose has a quick connect gas coupling.
The corresponding mating fitting will be required at the
gas supply end.
• For pipe sizing requirements for supply pipe refer to AS5601.
Fitting of slimline lid
• Unpack the slimline lid.
• Remove side screws from barbecue trim surround using
allen key supplied.
• Fit brackets to trim surround with the same screws.
• Fit lid to brackets.
Universal LPG Requirements
warning
• If an LPG bottle is to be stored in the enclosure under
the barbecue unit, it must be isolated from the barbecue
unit with a non-combustible panel. The enclosure must
comply with the requirements of AS5601.
• AS5601 ventilation requirements for cylinder storage are:
Where of sheet metal or similar impervious construction
there shall be ventilation openings at the top and
bottom of the enclosure or recess, each opening
providing a free area of at least 200cm2 for every
cylinder enclosed.
cut hole in non- combustible
barrier for hose only
Fitting of roasting hood
• Unpack the roasting hood.
• Remove side and rear screws from barbecue trim
surround using allen key supplied.
210mm
important
front of enclosure removed
for clarity
non-combustible barrier
required under barbecue
at least 30mm clearance between
bottom of barbecue and barrier
Setting up the barbecue
Setting up the barbecue in mounting enclosure
• A match holder with attached chain has been included
with the instruction manual. This is provided for manual
ignition in the event the automatic ignition does not work.
The free end of chain is required to be permanently
fixed to the installation in a location that enables the
match holder to reach each burner (refer to page 9 for
manual lighting instructions).
• After the enclosure has been constructed as described
on page 6, position the assembled barbecue into the
cut-out hole.
• Check that the barbecue is level and is firmly supported.
When barbecue is level hotplate and grills will slope
downwards towards front for drainage.
• Connect to gas supply (Universal LPG or Natural Gas)
and leak test.
• For fitment of the slimline lid or roasting hood (see right).
• D
ue to the size of the roasting hood, it is recommended
that two people place the roasting hood into position.
• When fitting roasting hood assembly, take particular
care to avoid scratching of the external trim.
• Once in position, fix hood assembly to trim surround
with same screws.
electrolux integrated barbecue configuration of hotplates and grills/operating instructions 9
Options for configuration of hotplates
and grills
important
Ensure flame tamers are positioned under the grill
panels
grill panels
flame tamers
Operating instructions
Control functions
Before lighting the barbecue:
• Check that all hoses and gas fittings are tight.
• Open the slimline lid or the roasting hood.
NOTE The slimline lid is designed as a cover for weather
protection. The lid is not designed to be used as a
cooking hood.
• Check all control knobs are in the ‘OFF’ position.
• Ensure that the cooking surfaces are clean.
• Turn the gas isolation valve ‘ON’.
Lighting instructions
• Do not attempt to light burners with the cooking
surfaces covered.
• Read instructions before lighting.
• To light a burner, depress the knob and rotate to
‘RAPID PREHEAT’.
• Hold for 3 seconds, release and check the flame.
• If burner did not light, turn knob to the ‘OFF’ position.
Allow gas to disperse, then repeat lighting procedure.
Manual lighting
• If, in the advent of the automatic ignition system not
working, the barbecue can be lit manually.
• To light manually, fit a 40mm match to match holder
provided. Pass lit match through viewing slots below the
front of cooking plates down towards the burner, then
rotate the knob to ‘RAPID PREHEAT’ to ignite. If ignition
fails turn the control valve off and allow several minutes
for the gas to disperse before attempting to light again.
• Once alight, repeat for other burners as required.
Left hand hotplate, right hand grill – preferred orientation
for grilling
pass match holder through viewing slot at front under cooking plates
Left hand half grill, central hotplate, right hand half grill –
preferred orientation for roasting
Left hand grill, right hand hotplate – alternative preferred
orientation for grilling
Preheating
• This barbecue is fitted with high power burners. In most
conditions it will only be necessary to preheat the barbecue
for 5 minutes before cooking can commence.
• As with most things, experience will familiarise you with
the effectiveness of and the time required to achieve the
desired preheating time to obtain the desired cooking
temperature.
• Testing has shown that the burners can be turned to
the low position for satisfactory cooking.
• If the barbecue is fitted with a slimline lid, it is advisable
to remove the slimline lid in windy conditions.
• If the unit does not operate correctly refer to the
troubleshooting section on page 11.
• If the burners are left to run too hot there will be excessive
smoking during the cooking process and subsequent
burning of the food being prepared. This may also result
in excessive flaring of the fat being emitted from the food.
• Roasting with the hood closed only requires the 2 outermost
burners to be on low setting for satisfactory cooking.
To turn the burner off
• When cooking is complete, rotate the knob fully clockwise
so the pointer on the knob is positioned at the off position.
10 lid safety leg/cleaning and care electrolux integrated barbecue
Lid safety leg – slimline lid only
Cleaning and care
o ensure that the user remembers to turn off the gas
T
before closing the lid, a pivoting safety leg has been fitted.
The Electrolux Integrated barbecue has been constructed
from select grade stainless steel which, if not cared for, may
discolour over time. To keep your barbecue looking its best
we recommend that the cooking surfaces are cleaned after
every use.
pivoting safety leg
warning
Please ensure that your barbecue is switched off and
has cooled down before following the instructions
below.
Cleaning of Stainless Steel components
Hot Plate and Grill
• Remove all solid materials and excess grease from grill
and hotplate using scraper or wire brush
• To make cleaning easy, the two grill halves can be
removed with the hotplate. For stubborn stains, simply
soak the grill and plate components in hot soapy water
before rinsing thoroughly
• Ensure that all surfaces are dried with a clean dry cloth
When closing the lid the safety leg will pivot forward and
rest against the trim surface to prevent the lid closing. After
ensuring the gas has been turned off, to fully close the lid,
the leg needs to be rotated backwards.
pivoting safety leg
Other stainless steel surfaces
caution
Do not use abrasive or caustic cleaners, scourers or
metal scrapers on these stainless steel surfaces as they
may permanently scratch and damage your barbecue.
• W
ash all stainless steel components, including the
slimline lid, the roasting hood and control knobs with a
soft dishcloth using hot soapy water
• The barbecue interior can be wiped down with a soft
cloth in hot soapy water. The rear panel of the interior is
removable for easy cleaning
• Ensure that all surfaces are dried with a clean dry cloth
caution
warning
The slimline lid must not be closed when
the burners are operating.
Closing the lid during burner operation can cause
discolouration and damage to the lid and barbecue unit.
Take extra care (particularly when cleaning on and
around the control knobs) to ensure that water and
soapy residue do not enter the control panel, where
the valves are or into the burners. Care should also be
taken not to disturb the spark electrode. A distance
of 5mm should be maintained between it and the
burners (see diagram below).
5mm
electrolux integrated barbecue cleaning and care/maintenance/troubleshooting 11
Maintenance
Cleaning the Oil Reservoirs
The Integrated barbecue has a unique oil management
system which uses overlapping channels to drain all oil
to the front into easily removed reservoirs and should be
cleaned after each use.
• To remove reservoirs, pull upwards from the front of the
barbecue and dispose of the contents of the catchment
responsibly. Rinse oil reservoirs in warm soapy water.
The reservoirs can be placed in the dishwasher if
desired.
he ignition system
T
To change the battery rotate the cover anti-clockwise to
release. Lift off the cover to access spring and battery. Lift
out the spring and battery. Replace with a new AA battery
and replace the cover. Test by depressing the knob and an
audible ‘clicking’ sound should be heard.
NOTE
Ensure that the battery has been placed in the correct
orientation.
tips and information
Special note on “tea staining”
Sometimes stainless steel surfaces are affected by a brown
discolouration called tea staining. This usually occurs in
areas which use high heat and can be easily removed using
specialised stainless steel cleaners. For best results, we
recommend that specialised cleaners be used regularly on
all stainless steel components. You will find these cleaners
at most hardware stores.
tips and information
Special note on stainless steel
The stainless steel panels may distort while in use but will
return to normal when cold.
Air vents
The mounting enclosure air vents should be checked prior
to each use, to ensure they are clear of any obstructions
that may affect the free flow of air.
Stainless steel burners
Burners should be checked at least once per year and
cleaned as necessary. Inspect burners to ensure no
residues have been deposited and gas ports are clear.
Troubleshooting
problem
possible cause
remedy
Barbecue won’t
light
No gas
Check isolation valve
is ON
Gas bottle empty – refill
or change gas bottle
Ignition system
not working
Check battery – should
hear a clicking noise
when the knob is
depressed
Replace battery
Manually light the
barbecue
Ignition electrode
wet or dirty
Gently clean and dry
electrode ensuring
position is correct
Excess smoke
being emitted
from the cooking
area
Gas valve set too
high
Turn gas valves down or
turn off selected burners
Smell of gas
Gas leak
Turn off gas at the
isolation valves
DO NOT
ATTEMPT TO
LIGHT THE
APPLIANCE
Check for leaks, tighten
joints
If problem persists call
Electrolux Service
12 warranty electrolux integrated barbecue
Warranty
FOR SALES IN AUSTRALIA AND NEW ZEALAND
APPLIANCE: ELECTROLUX INTEGRATED BARBECUE
This document sets out the terms and conditions of product
warranties for Electrolux branded appliances. It is an important
document. Please keep it with your proof of purchase documents in
a safe place for future reference should you require service for your
Electrolux appliance.
General Terms and Conditions
1. In this warranty
(a) ‘Electrolux’ means Electrolux Home Products Pty Ltd ABN 51
004 762 341 in respect of Appliances purchased in Australia and
Electrolux (NZ) Limited in respect of Appliances purchased in New
Zealand;
(b)‘Appliance’ means any Electrolux product purchased by you
accompanied by this document;
(c)‘Warranty Period’ means
(i)where you use the Appliance for personal, domestic or household
purposes in Australia the period of ‘24’ months and in New
Zealand the period of ‘24’ months;
(ii)where you use the Appliance for commercial purposes, in
Australia the period of ‘3’ months and in New Zealand the period
of ‘3’ months, (if the period stated is 0 months you are not
covered by this product warranty) following the date of original
purchase of the Appliance;
(d)‘you’ means the purchaser of the Appliance not having purchased
the appliance for re-sale, and ‘your’ has a corresponding meaning.
2.This warranty only applies to Appliances purchased and used in
Australia or New Zealand and is in addition to (and does not exclude,
restrict, or modify in any way) any non-excludable statutory warranties
in Australia or New Zealand.
3.Electrolux warrants that, when dispatched from an Electrolux
warehouse, the Appliance is free from defects in materials and
workmanship for the Warranty Period.
4.During the Warranty Period Electrolux or its Authorised Service Centre
will, at no extra charge if your appliance is readily accessible without
special equipment, and subject to these terms and conditions, repair
or replace any parts which it considers to be defective. Electrolux or
its ASC may use reconditioned parts to repair your appliance. You
agree that any replaced Appliances or parts become the property of
Electrolux. This warranty does not apply to light globes, batteries, filters
or similar perishable parts.
5.Parts and Appliances not supplied by Electrolux are not covered by this
warranty.
6.Where you are within an Electrolux service area, this warranty covers
the cost of transport of the Appliance to and from Authorised Service
Centres of Electrolux and travelling costs for representatives of the
Authorised Service Centre to and from your home or business. If you
are outside an Electrolux service area, you will bear these costs. For
information about whether you are within an Electrolux service area,
please phone 13 13 49 in Australia, or 0800 10 66 10 in New Zealand.
7.Proof of purchase is required before you can make a claim under this
warranty.
8.You may not make a claim under this warranty unless the defect
claimed is due to faulty or defective parts or workmanship. Electrolux is
not liable in the following situations (which are not exhaustive):
(a) The Appliance is damaged by:
(i) accident
(ii)misuse or abuse, including failure to properly maintain or service
(iii)normal wear and tear
(iv)power surges, electrical storm damage or incorrect power
supply
(v)incomplete or improper installation
(vi) incorrect, improper or inappropriate operation
(vii) insect or vermin infestation.
(b)The Appliance is modified without authority from Electrolux in
writing.
(c)The Appliance’s serial number or warranty seal has been removed
or defaced.
(d)The Appliance was serviced or repaired by anyone other than
Electrolux or its Authorised Service Centres.
9.This warranty, the contract to which it relates and the relationship between
you and Electrolux are governed by the law applicable in the Australian
State where the Appliance was purchased or the law applicable in New
Zealand if the Appliance was purchased in New Zealand. Where the
Appliance was purchased in New Zealand for business purposes the
Consumer Guarantee Act does not apply.
Limitation of Liability
10.To the extent permitted by law:
(a)Electrolux excludes all warranties other than as contained in this
document;
(b)Electrolux shall not be liable for any loss or damage whether direct
or indirect or consequential arising from your purchase, use or nonuse of
the Appliance.
11.Provisions of the Trade Practices Act and State consumer legislation
in Australia, and the Consumer Guarantees Act, the Sale of Goods
Act and the Fair Trading Act in New Zealand, imply warranties or
conditions, or impose obligations, upon Electrolux which cannot be
excluded, restricted or modified. To the extent permitted by law, the
liability of Electrolux (if any) arising out of or in relation to the Appliance
or any services supplied by Electrolux shall be limited (where it is fair
and reasonable to do so),:
(a)in the case of Appliances, at its option, to the replacement or
repair of the Appliances or the supply of equivalent products or
the payment of the cost of replacing the Appliances or having the
Appliances repaired or of acquiring equivalent Appliances. Upon
being replaced, parts and Appliances become the property of
Electrolux; or
(b)in the case of services, at its option, to the supply of the services
again or the payment of the cost of having the services re-supplied;
and in the case of Appliances or services supplied in New Zealand,
loss or damage whether direct or indirect or consequential that is
reasonably foreseeable.
Privacy
You acknowledge that in the event that you make a warranty claim it will be
necessary for Electrolux and its Authorised Service Centres to exchange
information in relation to you to enable Electrolux to meet its obligations
under this warranty.
Important Notice
Before Calling a Service Technician please check carefully the operating instructions, service booklet and the warranty terms and conditions.
FOR SERVICE
or to find the address of your nearest
state service centre in Australia
Please call 13 13 49
For the cost of a local call (Australia only)
FOR SERVICE
or to find the address of your nearest
authorised service centre in New Zealand
Free call 0800 10 66 10
(New Zealand only)
SERVICE AUSTRALIA
ELECTROLUX HOME PRODUCTS
www.electrolux.com.au
SERVICE NEW ZEALAND
ELECTROLUX HOME PRODUCTS
www.electrolux.co.nz
FOR SPARE PARTS
or to find the address of your nearest
state spare parts centre in Australia
Please call 13 13 50
For the cost of a local call (Australia only)
FOR SPARE PARTS
or to find the address of your nearest
state spare parts centre in New Zealand
Free call 0800 10 66 20
(New Zealand only)
electrolux integrated barbecue contents i
Electrolux Home Products
Australia
telephone: 1300 363 640
fax:
1800 350 067
email:
customercare@electrolux.com.au
web:
www.electrolux.com.au
New Zealand
telephone: 09 573 2230
fax:
0800 36 36 00
email:
customercare@electrolux.co.nz
web:
www.electrolux.co.nz
Congratulations
Congratulations and thank you for choosing our integrated
barbecue. We are sure you will find your new barbecue
a pleasure to use. Before you use the barbecue, we
recommend that you read through the entire user manual,
which provides the description of the barbecue and its
functions.
To avoid the risks that are always present when you use
a gas appliance, it is important that it is installed correctly
and that you read the safety instructions carefully to avoid
misuse and hazards.
We recommend that you keep this instruction booklet for
future reference and pass it on to any future owners.
After unpacking the barbecue please check it is not
damaged. If in doubt, do not use the appliance but contact
your local Electrolux Customer Care Centre.
The Thoughtful Design Innovator.
Do you remember the last time you opened a gift that made you say “Oh! How did you know?
That’s exactly what I wanted!” That’s the kind of feeling that the designers at Electrolux seek to
evoke in everyone who chooses or uses one of our products. We devote time, knowledge, and a
great deal of thought to anticipating and creating the kind of appliances that our customers really
need and want.
This kind of thoughtful care means innovating with insight. Not design for design’s sake, but design
for the user’s sake. For us, thoughtful design means making appliances easier to use and tasks more
enjoyable to perform, freeing our customers to experience that ultimate 21st century luxury, ease
of mind. Our aim is to make this ease of mind more available to more people in more parts of their
everyday lives, all over the world. So when we say we’re thinking of you, you know we mean just that.
Contents
• Product description
• Parts
• Important safety instructions
• Assembling the barbecue
• Gas specifications
• Gas connection detail
• Natural Gas installation
• Universal LPG installation
• Gas bottle safety information
• Leak test procedure
• Installation warnings
• Installation instructions
• Dimensions
• Gas requirements
• Setting up the barbecue
• Fitting the slimline lid or roasting hood
• Options for configuration of hotplates and grills
• Operating instructions
• Lid safety lid – slimline lid only
• Cleaning and care
• Maintenance
• Troubleshooting
• Warranty
The “Thinking of you” promise from Electrolux goes beyond meeting the needs of today’s consumers.
It also means we’re committed to making appliances safe for the environment—now and for future
generations.
Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com.au or www.electrolux.co.nz
ii
iii
1
2
3
3
3
4
5
5
6
6
7
8
8
8
9
9
10
10
11
11
12
environmental tip
Information on disposal for users
P/No. 0616001937 - Rev A
© Copyright 2010 Electrolux Home Products Pty Ltd
ABN 51 004 762 341
Print code: EINTBBQUM_Aug 10
user manual
integrated barbecue
(EQBL100AS and EQBH100AS)
• Most of the packing materials are recyclable. Please
dispose of those materials through your local recycling
depot or by placing them in appropriate collection
containers.
• If you wish to discard this product, please contact your
local authorities and ask for the correct method of disposal.