Medion AKOYA C15x Instruction manual

39.6 cm / 15.6“ Notebook
MEDION® AKOYA® C15x
Instruction Manual
Contents
1.
2.
3.
4.
5.
6.
7.
8.
About these Instructions............................................................................. 5
1.1.
Symbols and Key words used in these Instructions ................................... 5
1.2.
Proper Use ................................................................................................................. 6
1.3.
Declaration of Conformity ................................................................................... 6
Safety Instructions....................................................................................... 7
2.1.
Dangers for children and people with reduced ability to operate
electronics ................................................................................................................. 7
2.2.
Operational Safety .................................................................................................. 7
2.3.
Never Carry Out Repairs Yourself ..................................................................... 9
2.4.
Data Backup .............................................................................................................. 9
2.5.
Setup Location ......................................................................................................... 9
2.6.
Environmental Requirements ..........................................................................10
2.7.
Ergonomics .............................................................................................................10
2.8.
Connecting..............................................................................................................11
2.9.
Cabling......................................................................................................................12
2.10. Information about the Touchpad....................................................................13
2.11. Battery.......................................................................................................................13
Included with your Notebook ................................................................... 14
Views ........................................................................................................... 15
4.1.
Open Notebook .....................................................................................................15
4.2.
Right Side.................................................................................................................16
4.3.
Left Side....................................................................................................................16
4.4.
Front View ................................................................................................................17
4.5.
Operating and Status LEDs................................................................................17
First Use ...................................................................................................... 18
Power Supply ............................................................................................. 19
6.1.
On/Off Switch.........................................................................................................19
6.2.
Mains Power ...........................................................................................................20
6.3.
Battery Mode ..........................................................................................................21
6.4.
Power Management (Power Options) ...........................................................24
6.5.
ECO Function (optional) .....................................................................................24
Display ........................................................................................................ 25
7.1.
Opening and Closing the Display ...................................................................25
7.2.
Screen Resolution .................................................................................................25
7.3.
Appearance and Customisation ......................................................................26
7.4.
Connecting an External Monitor .....................................................................27
Data Input................................................................................................... 28
8.1.
The Keyboard .........................................................................................................28
8.2.
The Touchpad .........................................................................................................30
1 of 72
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
2 of 72
The Hard Drive ........................................................................................... 32
9.1.
Important Directories..........................................................................................33
The Optical Drive ....................................................................................... 34
10.1. Inserting a Disc ......................................................................................................34
10.2. Playing/Reading Discs.........................................................................................35
10.3. Regional Playback Information for DVDs .....................................................35
10.4. Issues Relevant to the Burner ...........................................................................36
The Sound System ..................................................................................... 37
11.1. External Audio Connections .............................................................................37
Network Operation .................................................................................... 38
12.1. What is a Network? ..............................................................................................38
12.2. Wireless LAN (Wireless Network) ....................................................................38
12.3. Bluetooth .................................................................................................................40
12.4. Flight Mode .............................................................................................................40
The multi-Card Reader .............................................................................. 41
13.1. Inserting a Memory Card ...................................................................................41
13.2. Removing Memory Cards ..................................................................................41
The Webcam ............................................................................................... 41
The Universal Serial Bus Port ................................................................... 42
15.1. Charging function for Compatible Mobile Phones (optional)..............42
Securing Your Notebook ........................................................................... 43
16.1. Password Setting (Power-on) ...........................................................................43
16.2. Kensington Security Lock ..................................................................................43
Software ..................................................................................................... 44
17.1. Getting to Know Windows® 8 ............................................................................44
17.2. Windows Activation .............................................................................................44
17.3. Windows® 8 – What’s New .................................................................................45
17.4. Overview ..................................................................................................................47
17.5. Linking a User Account to a LiveID .................................................................49
17.6. Windows® 8 Start Screen....................................................................................50
17.7. Windows® 8 Desktop ...........................................................................................51
17.8. Using the Search Function ................................................................................54
Control Panel .............................................................................................. 54
18.1. Windows® 8 Power On/Off Functions ............................................................55
18.2. Control Panel Settings.........................................................................................56
18.3. Resetting the Notebook to its Factory Settings .........................................56
18.4. UEFI firmware configuration .............................................................................58
18.5. Windows® 8 – Help and Support .....................................................................58
FAQ – Frequently Asked Questions .......................................................... 59
20.
21.
22.
23.
24.
25.
Customer Service ....................................................................................... 60
20.1. What To Do In Case of Hardware Problems ................................................60
20.2. Find The Cause ......................................................................................................60
20.3. Do You Need More Help? ...................................................................................62
20.4. Driver Support .......................................................................................................62
20.5. Transport..................................................................................................................63
20.6. Maintenance ...........................................................................................................64
20.7. Care of the Display ...............................................................................................65
Upgrading/Modifying and Repair ............................................................ 65
21.1. Notes for Service Technicians ...........................................................................66
21.2. Information on Laser Radiation .......................................................................66
Recycling and Disposal.............................................................................. 67
European EN 9241-307 Class II Standard ................................................. 68
23.1. FCC Compliance Statement ..............................................................................70
Legal notice ................................................................................................ 70
Index ........................................................................................................... 71
3 of 72
Personal Information
Please append the following to your proof of ownership:
Serial number
................................................
Date of purchase
................................................
Place of purchase
................................................
You will find the serial number on the underside of the Notebook. Where
applicable, also copy the number on your warranty documents.
Our Target Group
This operating manual is intended to be read by both first-time and experienced
users. Regardless of any possible professional use, this Notebook is designed for use
in a private household. The entire family will be able to enjoy the wide variety of
applications it offers.
The Quality
We select our components with a close eye to functionality, ease of use, safety and
reliability. Thanks to our ideally balanced hardware/software concept we are able to
offer you a state-of-the-art Notebook that you will enjoy whether you are working
or at play. Thank you for purchasing our products. We are delighted to welcome you
as our new customer.
Trademarks: MS-DOS® and Windows®8 are registered trademarks of the Microsoft®
corporation. Intel, the Intel Logo, Intel Inside, Intel Core, Notebook, and Core Inside
are trademarks of Intel Corporation in the U.S. and/or other countries.
®
, the HDMI logo and the name High-Definition Multimedia Interface
are registered trademarks of HDMI Licensing LLC.
Other trademarks are the property of their respective owners.
4 of 72
1. About these Instructions
Before using the device for the first time, please read these operating
instructions carefully, paying special attention to the safety notices.
This device should only be used as designated and as described in these
instructions.
Please keep these instructions in a safe place for future reference.
Always include these instructions if passing the device on.
1.1. Symbols and Key words used in these
Instructions
DANGER!
Warning of immediate risk of fatal injury!
WARNING!
Warning: possible mortal danger and/or serious
irreversible injuries!
CAUTION!
Warning: possible light or moderate injuries!
CAUTION!
Please follow the guidelines to avoid injuries and/or
property damage.
PLEASE NOTE!
Additional information on using the device
PLEASE NOTE!
Please follow the guidelines in the operating instructions.
WARNING!
Warning: danger of electric shock!
WARNING!
Warning: danger due to excessive volume!
5 of 72
•

Bullet point/information on operating steps and results
Tasks to be performed
1.2. Proper Use
This device is designed for the use, management and editing of electronic
documents and multimedia content, as well as for digital communication. The
device is intended for private use only and not for industrial/commercial use.
Please note that we shall not be liable in cases of improper use:
• Do not modify the device without our consent and do not use any auxiliary
equipment which we have not approved or supplied.
• Use only spare parts and accessories which we have supplied or approved.
• Follow all the instructions in this instruction manual, especially the safety
information. Any other use is deemed improper and can cause personal injury
or damage to the product.
• Do not use the device in extreme environmental conditions.
1.3. Declaration of Conformity
This device is supplied with the following wireless features:
• Wireless LAN (optional)
• Bluetooth (optional)
Medion AG hereby declares that this device conforms to the fundamental
requirements and the remaining relevant regulations of the 1999/5/EC R&TTE
Directive.
This product satisfies the basic requirements and relevant regulations of the
Ecodesign Directive 2009/125/EC. Full declarations of conformity are available at
http://www.medion.com/conformity.
6 of 72
2. Safety Instructions
2.1. Dangers for children and people with reduced
ability to operate electronics
• This device is not intended for use by people (including children)
with reduced physical, sensory or mental abilities or for those
without experience and/or knowledge, unless they are supervised
by a person responsible for their safety or they have been
instructed in its use.
• Children should be supervised to ensure that they do not play
with the device. Children should not be allowed to use this device
without supervision.
• Keep the device and its accessories out of the reach of children.
DANGER!
Keep plastic packaging out of the reach of children. There
is a risk of suffocation.
2.2. Operational Safety
Please read this section carefully and follow all instructions given. The
instructions will help you to operate the Notebook reliably and increase its service life.
• Never open the housing of the Notebook, battery or mains
adapter! This could result in an electric shock or even ignite a fire
which will damage your Notebook.
• Optical drive (CD/CDRW/DVD) constitute class 1 laser equipment
providing these devices are contained in a sealed Notebook
housing. Do not remove the drive cover as invisible laser radiation
may escape.
• Do not insert anything into the Notebook through the slots and
openings. This could result in an electric shock or even ignite a fire
which will damage your Notebook.
• The slots and openings on the Notebook are for ventilation
purposes. Do not cover these openings as this could cause the
device to overheat.
7 of 72
• The Notebook is not intended for use by companies in the heavy
industry sector.
• To avoid damage from lightning strikes, do not operate the
Notebook during thunderstorms.
• Do not place any objects on top of the Notebook and do not exert
pressure on the display. Otherwise, there is a risk that the display
may break.
• If the screen breaks, there is a danger of injury. If this happens, pick
up the shattered pieces wearing protective gloves and send them
to your service centre for professional disposal. Finally, wash your
hands with soap, as the pieces may have been contaminated with
chemicals.
• Do not fold the display back by an angle of more than 120°.
Exceeding this value may damage the housing or the Notebook.
Always hold the display firmly by the middle when folding it back,
adjusting the position and closing it. Failure to do so may damage
the display. Never use force to open the display.
• To avoid damaging the screen, do not touch it with fingers or
sharp objects.
• Never lift the Notebook up by the display as this could break the
hinges.
• Should the below occur, switch the Notebook off immediately/
do not switch the Notebook on, disconnect the mains plug and
contact customer services if
− the mains adapter or the attached power cable or plug is burnt
or damaged. Replace faulty mains cables/mains adaptors only
with original parts. These parts should not be repaired under
any circumstances.
− the Notebook housing is damaged or liquid has penetrated into
the device. Have the Notebook inspected by customer services.
Otherwise, it may not be possible to operate the Notebook
safely. There may be a risk of electric shock and/or harmful laser
radiation!
8 of 72
2.3. Never Carry Out Repairs Yourself
WARNING!
Never try to open or repair the device yourself. There is a
risk of electric shock.
• If there is a fault, contact the Medion Service Center or other
suitable specialist workshop.
2.4. Data Backup
CAUTION!
Back up your data on external storage media before
each update. We do not accept any liability for claims for
compensation arising from loss of data or any consequential
loss or damage.
2.5. Setup Location
• Keep your Notebook and all connected devices away from
moisture and avoid dust, heat and direct sunlight. Non-compliance
with these instructions can lead to faults or damage to the
Notebook.
• Do not use the Notebook outdoors because external elements,
such as rain, snow, etc., could damage it.
• Set up and operate all components on a stable, level and vibrationfree surface to prevent the Notebook from falling down.
• Do not operate the Notebook or power adaptor for long periods
on your lap or any other body part as the heat dissipation on the
underside can result in uncomfortable overheating.
• In the first few hours of use new devices can give off a typical,
unavoidable but totally harmless smell, which wears off with time.
Ventilate the room regularly to prevent odour build-up.
• This device is not suitable for use with VDU workstations.
9 of 72
2.6. Environmental Requirements
• The Notebook is most reliably operated at an ambient temperature
between 5° C (+41° F) and 30° C (+86° F) and at a relative humidity
between 20% and 80% (without condensation).
• When powered off, the Notebook can be stored at temperatures
between 0° C and 60° C (+32° F and 140° F).
• During a thunderstorm, disconnect the mains plug and the
antenna plug. For extra safety, we recommend using an
overvoltage protection device to prevent the Notebook from
sustaining damage as a result of power surges or lightning strikes.
• After transporting the Notebook, wait until the device has reached
room temperature before switching it on. Large changes in
temperature or fluctuations in humidity can cause moisture buildup within the Notebook due to condensation. This can cause an
electrical short circuit.
• Keep the original packaging in the event the device needs to be
sent in the post.
2.7. Ergonomics
PLEASE NOTE!
Avoid dazzle, reflections and strong bright-dark contrast in
order to protect your eyes.
The Notebook should never be placed next to a window because this is the
brightest part of the room in daylight. This brightness can make it more difficult for
the eyes to adjust to the darker display. The Notebook should always be positioned
so that the direction of vision is parallel to the window front.
Setting up the Notebook with your back to the window is incorrect as reflections
from the bright window on the screen will then be unavoidable. A position looking
onto the window is also incorrect as the contrast between the dark screen and the
bright daylight can cause problems for the eyes to adjust and result in problems.
The parallel line of vision should also be maintained in relation to artificial lighting
equipment.
In other words, the same criteria and principles apply where the workspace is
illuminated with artificial light. Where space restrictions make it impossible to
set up the screen as described, then correct positioning (rotating, tilting) of the
Notebook/screen can prevent dazzling, reflections and excessive bright-dark
contrast, etc.
10 of 72
In many cases, an improvement can also be achieved by using slats or vertical
blinds on the windows, partition walls or by changing the artificial lighting
equipment.
2.8. Connecting
Follow the instructions below to connect your Notebook correctly
and safely:
2.8.1. Power Supply
DANGER!
Do not open the housing of the mains adapter. There is a
risk of electric shock when the housing is open. It does not
contain any parts requiring maintenance.
The socket outlet must be close to the Notebook and easily accessible.
• To disconnect the power supply from your Notebook (via the
mains adaptor), pull the mains plug from the power outlet.
• Plug the Notebook’s mains adapter into AC 100–240 V~, 50/60 Hz
earthed sockets only. If you are not sure about the power supply at
the set-up location, please ask your power supplier.
• Use only the mains adapter and power cable supplied.
• For extra safety, we recommend using an overvoltage protection
device to prevent your Notebook from sustaining damage as a
result of power surges or lightning strikes.
• If you want to disconnect the adapter from the mains, pull the
connector out of the wall socket first and then out of the socket
on the Notebook. The mains adapter or the Notebook may be
damaged if this process is carried out in the reverse order. Always
take hold of the plug when disconnecting the cable from the
socket. Never pull on the cable.
11 of 72
2.9. Cabling
• Position the cables so that they cannot be stepped on or tripped
over.
• To avoid damaging the cables, do not place any objects on them.
• Do not connect peripheral devices – such as keyboards, mouse
and monitor, etc. – when the Notebook is switched on to avoid
damage to the Notebook or the devices. Some devices may also
be connected while the computer is running. This is generally the
case for devices with a USB connection. In all cases, observe the
relevant operating instructions.
• Maintain a distance of at least one metre from sources of highfrequency and magnetic interference (TV sets, loudspeakers,
mobile phones, DECT telephones, etc.) in order to avoid
malfunctions and data loss.
• Please note that only shielded cables that are shorter than 3
metres may be connected to the external interfaces of this
Notebook. Please only use double-shielded cables for printer cable
connections.
• Do not exchange the supplied cable for another one. Use only
the supplied cable as this cable has been extensively tested in our
laboratory.
• In addition, when connecting your peripherals only use the
connecting cables supplied with those devices.
• Ensure that all connection cables are connected to their
corresponding peripheral device to avoid any interference
radiation. Disconnect any cables that are not required.
• The only devices which may be connected to the Notebook are
those that meet the requirements set out in the EN60950 standard
“Information Technology Equipment – Safety” or devices that
meet the EN60065 standard “Audio, video and similar electronic
apparatus – Safety requirements”.
12 of 72
2.10. Information about the Touchpad
• The touchpad is operated with the thumb or another finger and
reacts to the energy given out by the skin. Do not use pens or
other objects as these can damage your touchpad.
2.11. Battery
CAUTION!
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the manufacturer‘s
instructions. Never attempt to disassemble or reassemble.
Do not heat up above 60°C (140°F). Do not dispose of in
fire or directly short circuit.
To extend your battery’s performance and lifespan and ensure safe
operation, you should also observe the guidelines below:
• Avoid dirt and contact with electrically conductive materials or
chemical substances and cleaning agents.
• Use only the supplied mains adaptor to charge the battery. Make
sure (via the Notebook display or acoustic signal) that the battery
is fully discharged before charging it again.
• Always charge the battery until the battery charging light goes
out. Please also observe the information in “Charging the battery”
on page 31 to assess the charge status of your battery.
• Ensure the Notebook is switched off before replacing the battery.
13 of 72
3. Included with your Notebook
Please check that the contents are complete and notify us within 7 days of purchase
if any of the following components are missing:
• Notebook
• Li-Ion Battery
• AC Adapter with Power Cord
AC/DC adapter
•
•
Manufacturer
FSP Technology Inc., China
Model
FSP065-RHC
Required mains voltage
100 - 240 V (50-60 Hz)
AC input
DC output
100 - 240V~ 2,0 A 50 - 60 Hz
19 V
3,42 A
OEM version of operating system
Instruction Manual
DANGER!
Keep packaging material such as plastic film away from
children. There is a risk of suffocation if used improperly.
14 of 72
4. Views
4.1. Open Notebook
1 2
3
4
10
5
6
9
8
7
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
Webcam
Webcam led
Microphone
LCD Display
Stereo loudspeakers
Keyboard
Touchpad
Device Indicators
Touchpad Lock
The touchpad lock is deactivated or activated by a double tap on the symbol
and the display will light up.
Power ON/OFF
15 of 72
4.2. Right Side
11
11)
12)
13)
14)
15)
16)
12
13
14 15
18
19
16
Audio Out / Headset connection
USB 2.0 Port
Optical Drive
Disc Eject Button
Emergency Ejection
Kensington® Lock
4.3. Left Side
17
17)
18)
19)
20)
21)
22)
20
21 22
Power Socket
External monitor port VGA (optional)
LAN Port (RJ-45)
HDMI Connector
USB 3.0 Port
USB 3.0 Port with charging function for mobile phones (optional)
CAUTION!
The charging function is available in sleep mode and when the
laptop is switched off providing it is activated beforehand in
the UEFI firmware settings. The charging function for mobile
phones is switched on as standard.
16 of 72
4.4. Front View
23
23)
Multimedia Card Reader
4.5. Operating and Status LEDs
The system displays power supply status and operating modes via LEDs. The
operating lights also light up during Notebook activity:
Access Indicator
This LED lights or flashes when the Notebook is accessing the hard disk
or the optical drive.
WLAN / Bluetooth LED
This LED lights when the WLAN /Bluetooth function is activated.
Capital Lock
This LED lights when CAPS-Lock has been activated. This sets the
keyboard to capital letters.
Num Lock
This LED lights when NUM-Lock has been activated.
Operating Indicator
This LED will shine if the system is switched on.
17 of 72
5. First Use
To operate your Notebook safety and ensure a long service life, you should read the
“Operational safety” chapter at the beginning of this manual. All operating software
is already fully preinstalled on the Notebook so there is no need for you to install
any more drivers and you can get started right away.
 Before starting, insert the battery by placing it into the compartment until it
clicks into place. Be sure to fasten the battery compartment to prevent the
battery falling out.
 Connect the supplied mains adapter to the Notebook (17). Next, connect the
power cable to the adapter and then plug it into a mains socket. Move the
switch on the mains adapter (optional) to position I to power the Notebook and
charge the battery. Set this switch to 0 to stop the power supply.
 Open up the display to the desired position using your thumb and forefinger.
The display should not be folded back by more than 120°. Always hold the
display firmly by the middle when folding it back, adjusting the position and
closing it. Failure to do so may damage the display. Never use force to open the
display.
PLEASE NOTE!
When first operating your Notebook please ensure that the battery
is inserted and the mains adapter is connected. This is required for
Windows® 8 to correctly work out the Windows® 8 performance index.
 Switch the Notebook on by pressing the on/off switch (10). The Notebook will
now start and run through various steps.
PLEASE NOTE!
There should be no bootable disk (e.g. the recovery disc) in the optical
drive as this will prevent the operating system from being loaded from
the hard drive.
18 of 72
The operating system will be loaded from the hard drive. The loading process takes
a little longer during the initial setup. Once all the necessary data has been entered,
the operating system will be set up. The operating system is fully loaded once the
Windows® 8 start-up screen appears.
PLEASE NOTE!
The initial installation may take a few minutes. Do not unplug the
Notebook from the mains or switch it off during the initial installation.
This may adversely affect the installation. Do not switch off the
Notebook until after the installation has been completed successfully
and the startup screen appears.
6. Power Supply
6.1. On/Off Switch
 Open the Notebook and hold the on/off switch down briefly to switch the
Notebook on or off.
19 of 72
The operating light indicates the current operating mode. Regardless of the
operating system, the Notebook will switch off if the switch is held down for longer
than 4 seconds continuously.
CAUTION!
Do not switch your Notebook off while the hard drive or optical
drive is being accessed. Otherwise data may be lost. To protect
the hard drive, you should always wait for 5 seconds after
switching off the Notebook before switching it back on again.
6.2. Mains Power
Your Notebook comes with a universal mains adapter for alternating current which
automatically adapts to the available power source. The following values are
supported: AC 100–240 V~/50–60 Hz. Observe the safety information concerning
the power supply on pages 12 ff.
The adapter is connected to an AC outlet via a mains cable. The mains adapter DC
cable is connected to the left side of the Notebook (17).
The adapter has an on/off switch (optional). When the switch is set to OFF (0), no
power is being consumed and no power is being supplied to the Notebook.
The adapter supplies the Notebook with power in the ON position (I) and also
charges the battery. The operating lights on the Notebook provide information
about the operating mode. Your battery will also be charged while you work
on your Notebook with the mains adapter connected. The mains adapter also
consumes power when the Notebook is not connected to it. You should therefore
always remove the mains adapter plug from the socket when it is not connected to
the Notebook or move the switch to the OFF (0) position.
CAUTION!
Use only the mains adapter and power cable supplied.
6.2.1. Starting the Notebook
 Open up the display as described above and press the on/off switch.
 Follow the instructions on the screen. Step-by-step instructions will guide you
through the process to be followed.
 The welcome procedure takes you through several screens and dialogues.
 Select your desired language and then the corresponding country settings.
20 of 72
Licence Agreement
Please read through the licence agreement carefully. It provides important legal
information about the use of your software product. To view the text in full, you
must slide the scroll bar downwards using the mouse until you reach the end of
the document. You accept the licence agreement by checking the I accept the
agreement radio button. Only this entitles you to use the product in accordance
with the terms and conditions.
After entering a computer name you can connect your Notebook to the Internet
immediately on the “Wireless” page (if you already have an appropriate Internet
connection set up).
If you choose to skip this point, you can connect to the Internet later via the
Windows® 8 interface.
If you have already set up an Internet connection, you can now log in to your
Notebook using a Microsoft account.
The Microsoft Store allows you to purchase new apps or update previously installed
apps.
If you log in on a local account, you can set up a Microsoft account later at any time.
The following animated windows simply contain information about using the new
Windows® 8 operating system.
No entries of any kind may be made during the animation.
The Windows® 8 interface appears after the login process.
PLEASE NOTE!
In the first few days following the initial installation, Windows® 8 may
update and configure data (e.g. with new updates) which can result in
delays in the Notebook shutting down and starting up. For this reason,
do not switch the Notebook off prematurely. This may adversely affect
the installation.
6.3. Battery Mode
PLEASE NOTE!
Please charge and discharge the new battery completely two or three
times consecutively to ensure that it reaches its optimum performance!
Batteries store electrical energy in their cells and then release it again as
required.
The service life and performance of your battery depends on careful handling.
The battery should always be completely discharged before charging and then fully
charged again to optimise the service life and performance.
Please also take note of the safety instructions on „Safety Instructions“.
21 of 72
6.3.1. Inserting the Battery
 Insert the battery before bringing the notebook into operation by sliding the
battery pack into the compartment. The battery should remain locked in order
to avoid it falling out.
6.3.2. Removing the Battery
 To remove the battery pack, slide the battery lock to the ‘lock open’ position
and remove the battery pack from the compartment.
2
1
1
CAUTION!
Do not remove the battery while the Notebook is switched on
or data may be lost.
Take care when storing the battery and when using the
Notebook that the contacts on the battery and the Notebook
are not soiled or damaged. This could cause malfunctions.
22 of 72
6.3.3. Charging the Battery
The battery is charged using the mains adapter. When the mains adapter is
connected and switched on, the battery charges automatically regardless of
whether or not the Notebook is switched on or not. A complete charge takes a
few hours with the Notebook switched off. With the Notebook switched on, the
charging process takes significantly longer.
PLEASE NOTE!
The charging process is interrupted if the battery voltage or
temperature gets too high.
6.3.4. Discharging the Battery
Operate the Notebook on battery power until it turns itself off due to low battery
charge.
PLEASE NOTE!
Be sure to save your open files promptly to prevent any data
loss.
6.3.5. Battery Performance
The actual operating time varies depending on the configuration of the powersaving functions. You can configure these to suit your requirements in the
Control Panel under System and Security, Power Options. Note: your Notebook
consumes more power when running certain applications, e.g. when playing a DVD.
6.3.6. Checking the Battery Charge
To check the current battery charge status, move the cursor over the power icon in
the task bar.
In battery mode, the icon is displayed as a battery.
You can obtain more information about settings by double-clicking the icon.
23 of 72
PLEASE NOTE!
If you ignore the low battery warning, your Notebook will shut down.
CAUTION!
Never remove the battery while the Notebook is switched on
or before the Notebook has shut down completely as this can
lead to data loss.
6.4. Power Management (Power Options)
Your Notebook offers automatic and customisable power-saving and energy
functions that can be used to optimise battery life and reduce the overall operating
costs.
6.4.1. Sleep Mode
With this setting the content of your Notebook’s RAM is preserved while practically
all other components of your Notebook are disabled or their power consumption
reduced to a minimum. For example, if you flip the Notebook shut, it puts it into
sleep mode and it is automatically restarted upon opening.
PLEASE NOTE!
Changes can be made to the sleep settings at any time in the power
options.
6.5. ECO Function (optional)
You will be able to save energy and extend the running time of your battery by
deliberately activating functions. The ECO Function is switched on or off by means
of the Fn + F4 key combination.
24 of 72
7. Display
7.1. Opening and Closing the Display
The special design of the display hinges keeps the display closed without the need
for an additional catch.
 To open the Notebook, fold the display up to the desired position using your
thumb and forefinger.
CAUTION!
Do not fold the display back by an angle of more than 120°.
Always hold the display firmly by the middle when folding it
back, adjusting the position and closing it. Failure to do so may
damage the display. Never use force to open the display.
Dem Schließen und Öffnen des Displays können über die Energieverwaltung
unterschiedliche Funktionen zugewiesen werden.
7.2. Screen Resolution
The integrated monitor can display up to 1366 x 768 pixels. If you change to a
display with different settings in the Windows® 8 Control Panel, Appearence and
Personalisation wizard, the display may not, in certain circumstances, fill the entire
screen area. Distortions can also occur, especially for fonts, when enlarging. You
can work with a higher resolution, however, if you connect an external monitor
with a higher resolution. The Windows® 8 Control Panel, Appearence and
Personalisation wizard allows you to adjust the display to the modes supported.
25 of 72
7.3. Appearance and Customisation
This program gives you the option of customising your desktop. This includes the
background image, the screensaver and other settings for your monitor and your
graphics card. The program can be started as follows:
• Right-click on the Windows desktop and left-click on Personalise.
or
• Via Settings, Personalisation, Display by double clicking with the left mouse
button.
 Move the mouse pointer into the top right or bottom corner of the display and
click
Settings.
 Then click Personalisation.
 First select the Display option from the dialogue box.
The following settings options are available:
− Set resolution
− Set brightness
− Calibrate colour
− Change display settings
− Display on second monitor
− Customise ClearType text
26 of 72
7.4. Connecting an External Monitor
The Notebook has a VGA connection socket (18) (optional) as well as an HDMI port
(20) for an external monitor.
 Shut down your Notebook correctly.
 Plug the external monitor’s signal cable into the VGA socket on the Notebook
(18). Alternatively, you can use the digital HDMI connection (High Definition
Multimedia Interface) (20) to transmit picture and sound signals.
 Connect the external monitor to the mains and switch it on.
 Now switch your Notebook on.
Once the operating system has loaded, the external monitor will be detected. A
number of options are available. You can access these as follows:
 Run the Desktop App.
 Move the mouse pointer into the top right or bottom corner of the display and
click
Settings.
 Then click Personalisation.
 In the dialogue box, first select the Display option and then Project to a
second screen.
 Press the
+ P buttons at the same time to open this menu quicker.
 Under Project to a second screen choose from the following options:
− PC screen only
− Duplicate
− Extend
− Second screen only
27 of 72
7.4.1. Duplicate
This mode duplicates the Notebook display on the external monitor.
PLEASE NOTE!
In this mode the same screen resolution must be configured for both
devices.
7.4.2. Extend
In this mode, a blank desktop is displayed on the second (external) monitor.
Windows on the first screen can be moved onto the second screen and vice versa.
The screen resolution and colour quality can be configured individually for each of
the display devices under Settings, Personalisation, Display.
7.4.3. PC Screen Only
The desktop will only be shown on main monitor 1.
7.4.4. Second Screen Only
The desktop will only be shown on the second (external) monitor.
8. Data Input
8.1. The Keyboard
The double assignment of certain keys means that the range of functions available
to you is the same as on a conventional Windows keyboard. Some functions are
entered using the Fn key (standard on most Notebooks).
28 of 72
8.1.1. Notebook-Specific Keyboard Shortcuts
Description
Fn + F1
Fn + F2
Fn + F4
Fn + F5
Fn + F6
Fn + F7
Fn + F8
Fn + F9
Fn + F10
Fn + F11
Fn + F12
Num Lk
Fn + Scr Lk
Sleep
Flight Mode
Opens the user interface for switching the WLAN and/or
Bluetooth function on or off.
ECO Function (optional)
This key combination activates / deactivates the ECO function.
Darker
Reduces the brightness of the display.
Brighter
Increases the brightness of the display.
Background lighting
Turns off background lighting for the integrated display to save
power. The lighting is turned back on by pressing Fn + F7.
Display
Switches the screen display between LCD, external display and
duplicate display.
Touchpad
Switches the touchpad on and off.
Mute
Switches the sound on or off.
Quieter
Decreases the playback volume.
Louder
Increases the playback volume.
Numeric key block
This key combination activates / deactivates the numeric key
block.
Scroll
This key combination activates / deactivates the scroll function.
Many applications use this function to scroll the screen without
moving the cursor
29 of 72
8.2. The Touchpad
In normal mode, the cursor follows the direction specified by moving your fingers
in the corresponding direction on the touchpad.
CAUTION!
Do not use pens or other objects as this can damage your
touchpad.
The left and right mouse buttons are found in the lower section of the touchpad
and can be used in the same way as those on a conventional mouse.
You can also perform a click or a double-click on the touchpad directly by tapping
the touchpad surface once or twice briefly.
In the Windows®8 control panel, under the Mouse item, you will find a number of
useful settings to simply your day-to-day tasks.
30 of 72
8.2.1. Two-Finger Touchpad Operation
Your touchpad supports two-finger operation which enables certain commands to
be executed in some applications.
You can perform the following commands using your touchpad:
Image
Command
Drag two fingers
together or apart
Function
zoom out
from an object/
zoom in on an object
Place one finger in the
centre and trace a circle
with the second finger
Rotate an object anti-clockwise
Swipe from left to
right/from right to
left with two fingers
simultaneously
Page forward/
page back
Swipe down or up
with two fingers
simultaneously
Scroll function This function is
used in most applications to scroll
up and down the screen without
having to move the cursor.
Swipe from top to
bottom on the touchpad
Opens the context menu on the
start screen and the top and
bottom tabs in Internet Explorer
Swipe from the far right
across the touchpad
Opens the menu bar
Swipe from the far left
across the touchpad
Scrolls through all open windows
31 of 72
9. The Hard Drive
The hard drive is your main memory medium and combines high storage capacity
with rapid data access. You Notebook is supplied with an OEM version** of the
Microsoft Windows®8 operating system which supports all of the Notebook’s
performance features. We have configured your Notebook’s hard drive so that you
will be able to work with it optimally without having to install any additional drivers
yourself. The Windows®8 operating system requires part of the capacity to manage
the hard drive therefore the hard drive’s full capacity is not available. This explains
any differences between the UEFI firmware configuration and the operating system
display. The Notebook’s operating system, other applications and security data are
located on the hard drive meaning that the full capacity is already reduced.
The first partition (C:\) contains the operating system, the applications and the
“Documents” folder for the configured user.
The second partition (D:\) is used for the data backup and also contains drivers
(D:\Drivers) and utilities (D:\Tools) for your Notebook.
CAUTION!
The startup files for system restoration „Resetting the Notebook
to its Factory Settings“ and the Windows® 8 installation files are
located in non-rewritable partitions. These partitions cannot
be deleted.
**
Original equipment manufacturer/program versions purchased from the manufacturer which are usually sold in conjunction with end devices
32 of 72
9.1. Important Directories
We have listed the most important directories below and described their contents.
CAUTION!
Do not delete or modify these directories or their content
otherwise data may be lost or system functionality may be
impaired.
C:\
The C: drive root directory contains important files required for Windows® 8 startup.
On delivery these files are hidden for security reasons.
C:\Programs
As the name suggests, software programs install the files required for running the
application into this directory.
C:\Windows
The main Windows ® 8 directory. The operating system saves its files here.
D:\Drivers
You will find all the (preinstalled) drivers required for your Notebook in this folder.
D:\Tools
Here you will find the utility programs for your Notebook.
33 of 72
10. The Optical Drive
10.1. Inserting a Disc
Unlike optical drives on a desktop PC, the Notebook uses a mount to hold the disc.
When inserting the disc ensure that it is pressed into the mount correctly and that
it clicks into position there.
PLEASE NOTE!
Do not stick protective film or other adhesive labels to the disc.
To prevent damage to your drive, do not use any deformed or
damaged discs.
CAUTION!
Do not use scratched, broken, dirty or poor quality discs. The
high speeds in the drive can cause these to break destroying
your data and damaging your device. Inspect discs carefully
before inserting them. If damage or dirt is visible, do not use
the disc. Damage caused by faulty media is not covered under
warranty and repairs will be chargeable.
Incorrectly positioning the disc in the mount can cause it to be
damaged when closing the drive drawer.
 With the device switched on, press the eject button on the optical drive to open
the drawer.
 Carefully pull the drawer out fully.
 Remove the disc from its case, where possible without touching the unprinted
side.
 Insert the disc into the drawer with the label up and carefully press it down. The
disc now lies flat in the drawer and audibly clicks onto the disc mount.
 Check that the disc can turn freely and then carefully slide the drawer back into
the optical drive until it clicks into place.
On delivery, your optical drive is assigned the drive letter “E”. You can easily
access the data on your discs using Windows Explorer (Computer). Run
Windows Explorer using the shortcut on the taskbar or by simultaneously
pressing the Windows key and the “E” key. When accessing DVD videos (or audio
and video files on conventional data CDs), the preinstalled media player is used
automatically.
 If you wish to remove a disc, press the eject button.
34 of 72
CAUTION!
Do not try to remove the disc from the drive while the
Notebook is accessing the optical drive.
10.1.1. Emergency Release of a Blocked Disc
In the event of the drawer no longer opening automatically, it can be opened
manually providing your device has an emergency eject hole.
 Exit Windows® 8 and switch off the Notebook.
 Insert a long pointed object (e.g. straightened paperclip) into the emergency
release until you feel some resistance.
 A slight push now opens the drawer.
 Remove the disc and restart the Notebook.
10.2. Playing/Reading Discs
Your optical drive is capable of playing audio CDs, DVD films or data CDs/DVDs.
Once a disc has been loaded, a dialogue box opens containing various playback
options. Normally, there will be a number of different options available.
If the dialogue box does not open, there is always the option of accessing the
optical drive via Explorer.
10.3. Regional Playback Information for DVDs
Playback of DVD film titles includes decoding MPEG2 video, digital AC3 audio
data and decoding CSS-protected content. CSS (sometimes also referred to as
Copy Guard) is the name of a data protection program used by the film industry to
protect against illegal copying.
Among the many controls for CSS licensees, the most important of the playback
restrictions involve country-specific content.
To make it easier to create geographically separate film releases, DVD titles are
coded for specific regions. Copyright laws required that each DVD film be limited to
a specific region (usually the region where it is sold).
DVD film versions can be published in multiple regions but CSS rules require that
each CSS decoder system may only be used for one region.
PLEASE NOTE!
The region setting can be changed up to five times via the
viewing software before the last setting becomes permanent.
If you then wish to change the region setting again, this
must be carried out by the manufacturer. Any shipping and
configuration costs must be borne by the user.
35 of 72
10.4. Issues Relevant to the Burner
This section only concerns devices supplied with a CD-RW, a combination CD/DVD
read drive or a DVD-RW drive. First some information about blank discs
10.4.1. Blank CDs and DVDs
Normal CDs are pressed by a glass master and then sealed. With blank discs, digital
information is burned onto them using the drive’s laser. They are therefore more
sensitive then conventional discs.
Because of this, it is essential to avoid, particularly in the case of unused blanks:
• exposure to direct sunlight (UVA/UVB radiation)
• scratches and damage
• extreme temperatures
36 of 72
11. The Sound System
11.1. External Audio Connections
Your Notebook has an integrated stereo speaker so you can always reproduce
sound without additional devices. Using the external connections provides you
with an ideal opportunity to connect your Notebook to external devices.
The Fn + 11 and Fn + 12 keyboard shortcut enables you to adjust the volume.
WARNING!
Listening to a device at high volumes for an extended
period via headphones/earphones can damage your
hearing. Excessive volume when using headphones or
earphones can damage your hearing. Before pressing
play, set the volume to the lowest setting. Start playback
and increase the volume to a comfortable level. Changing
the basic settings of the equaliser can also increase the
volume and thus cause permanent damage to your
hearing. Changing the drivers, software, equaliser,
operating system, etc., can also lead to an increase in
the volume and thus cause permanent damage to your
hearing.
Audio output /
Headset connection
(11)
For sound playback via external stereo devices such
as (active) speakers or headphones/headset, as well
as for speech recording via an external recording
device/headset.
37 of 72
12. Network Operation
12.1. What is a Network?
We talk about a network when multiple computers are directly connected to one
another. This allows users to transfer information and data with one another and to
share their resources (printers and drives).
Here are a few concrete examples:
• In an office, messages are exchanged by e-mail and appointments are managed
centrally.
• Users share one printer on the network and back up their data to a central
computer (server).
• Two or more computers are connected to one another to play network games or
exchange data.
12.1.1. Network Connection (RJ45)
Connect one end of a cable with a RJ45 connection (western jack) to your
Notebook’s network interface (19) and the other to a different computer or hub/
switch. You can find more details about the network in the Windows® 8 help.
12.2. Wireless LAN (Wireless Network)
Wireless LAN is an optional feature. This function enables you to establish a network
connection to a corresponding remote station. Please read about the necessary
requirements.
The wireless LAN function is enabled and disabled via the Windows® 8 menu and is
activated by default.
CAUTION!
Do not operate the WLAN function in locations (e.g.: hospitals,
planes, etc.) where there is sensitive equipment. Do not switch
the device unless you are sure it will cause no interference.
38 of 72
12.2.1. Requirements
A so-called WLAN access point may be used as a remote station. A WLAN access
point is a radio transmitting device that communicates with your Notebook and
controls access to the connected network.
WLAN access points are frequently found in large offices, airports, train stations,
universities or Internet cafés. They provide access to particular services and
networks or to the Internet.
Access permissions are generally necessary and often result in usage charges.
Access points often have built-in DSL modems. These so-called routers establish the
connection to the existing DSL Internet connection and the wireless LAN.
A connection can also be established to another end device with wireless LAN
functionality without an access point. Without a router, however, the network is
restricted to those devices directly connected to it.
The wireless network connection works in accordance with the IEEE 802.11n*
standard and is compatible with the IEEE 802.11b/g standard.
If encryption is used for the transfer, the same procedure must be used for all
devices. Encryption is a procedure to protect the network from unauthorised
access.
The transfer speed can vary depending on the distance and the number of users
accessing the remote station.
*
To make use of the full performance, a WLAN router compatible with the 802.11n
standard is required.
39 of 72
12.3. Bluetooth
Bluetooth technology is used to wirelessly bridge short distances. Bluetooth
devices transfer data via radio so that computers, mobile phones, printers,
keyboards, mice and other devices can communicate with one another wirelessly.
Bluetooth wireless technology has numerous possible applications. A few of them
are listed below:
• Creating a wireless Internet connection using a mobile phone.
• Transferring files between computers or between a computer and another
device.
• Printing using a Bluetooth printer.
• Using a Bluetooth keyboard and mouse.
• Connecting to a PAN (Personal Area Network).
• Synchronising a personal digital assistant (PDA) with a computer or other device
that uses Bluetooth.
The Bluetooth wireless technology data transfer speed can vary depending on
the device or environmental factors. Data can be transferred through walls, jacket
pockets and briefcases using a Bluetooth device. The transfer between Bluetooth
devices occurs at the high frequency of 2.4 Gigahertz (GHz). For Bluetooth high
speed data transfer, WLAN must be enabled and the partner station must also
support the high speed mode.
CAUTION!
Do not operate the Bluetooth function in locations (e.g.:
hospitals, aeroplanes, etc.) where there is sensitive equipment.
Do not switch the device unless you are sure it will cause no
interference.
12.4. Flight Mode
In flight mode, all wireless connections (e.g. WLAN, Bluetooth) are disabled. Flight
mode is disabled by default to ensure that all wireless connections are available.
 Move the mouse pointer into the top right or bottom corner of the display and
click
Settings.
 Next, click Change PC settings.
 Click Wireless.
Now enable or disable Flight mode here. Alternatively, use the Fn +
keyboard shortcut to open flight mode.
Once flight mode is enabled, a small aeroplane is displayed in the traditional
desktop task bar. You can also enable/disable flight mode by clicking this icon.
40 of 72
13. The multi-Card Reader
Memory cards are media that are used, e.g. in the field of digital photography, and
are gradually replacing the diskette. The shape and capacity of a memory card can
vary depending on the manufacturer.
Your Notebook supports the following formats:
• MMC (MultiMediaCard)
• SD (Secure Digital), SDHC, SDXC
When inserting the memory cards, ensure that the contacts are pointing in the right
direction, as specified in the list below. Inserting a card incorrectly may damage the
card reader and/or the card.
Card Type
SD (Secure Digital)
MMC (MultiMediaCard)
Connection Contacts
pointing downwards
pointing downwards
13.1. Inserting a Memory Card
PLEASE NOTE!
The memory cards can only be inserted in one direction. Please observe
the instructions in the section above.
 Slide the card in as far as it will go.
13.2. Removing Memory Cards
 To remove SD/MMC cards, first push these into the socket to release the safety
catch.
 Now pull the card out of the slot and store it properly.
14. The Webcam
The integrated webcam enables the use of various communication services.
41 of 72
15. The Universal Serial Bus Port
The universal serial bus (USB 1.1 and USB 2.0) is a standard for connecting input
devices, scanners and other peripherals. Up to 127 devices can be connected to the
USB ports via a single cable.
The USB 3.0 ports are fully backwards compatible with USB 2.0 and 1.1.
Your Notebook has 2 USB 3.0 connection sockets (21 ) and (22) ( optional) and
2 USB 2.0 connection sockets (20).
PLEASE NOTE!
Where possible, always connect your USB devices to the same port that
they were originally installed on. Otherwise they will be assigned a new
ID and the drivers will need to be reinstalled.
15.1. Charging function for Compatible Mobile Phones
(optional)
You can use the USB 3.0 port on the left side of the Notebook (22) to charge a
compatible mobile phone (5 volts max. 1.5A)
The charging function is available in sleep mode and when the Notebook is
switched off.
This function is disabled by default and can be enabled in the BIOS under the
Advanced, USB3 Charger option.
 Restart your Notebook and hold down the F2 key during the boot process until
the UEFI firmware configuration opens.
or
 Move the mouse pointer into the top right or bottom corner of the display and
click
Settings.
 Then click Power.
 Now hold down the Shift key and click on Restart.
 Now open the Troubleshoot item and then open the Advanced options.
 Open the UEFI firmware configuration and then click Restart.
CAUTION!
To save the Notebook’s battery we recommend only using the
charge function in mains power mode.
Disconnect external data media from this socket when you are
not using the Notebook.
The charging function is not available with less than 20%
battery power.
42 of 72
16. Securing Your Notebook
Your new Notebook has software and hardware solutions for preventing
unauthorised access.
16.1. Password Setting (Power-on)
You can protect your Notebook against unauthorised use with a power-on
password. On switching on the Notebook, a password prompt will appear on the
screen. The password is set up in the UEFI firmware configuration.
CAUTION!
Keep your password in a safe place. If you forget your
password, you have no way of deleting it. If this happens,
contact your service centre.
You can also use the Windows® 8 security options to protect your data against
unauthorised access.
16.2. Kensington Security Lock
you can use a so-called Kensington security lock to protect your Notebook against
theft. This security lock (complete with cable) is usually available as an accessory in
specialist retailers.
To attach the security lock, wind the cable around a stationery object, e.g. a table
leg. Plug the lock into the Kensington device and turn the key to lock it.
Keep the key in a safe place.
43 of 72
17. Software
This section deals with the subject of software. We distinguish here between the
operating system, the software (the applications), the Windows activation and
the UEFI firmware configuration.
PLEASE NOTE!
The current Windows family currently includes Windows 8 and Windows
8.1. Windows 8.1 is the first update of the Windows 8 generation.
17.1. Getting to Know Windows® 8
Windows® 8, the new operating system from Microsoft, contains a series of
innovative functions and new technologies that your Notebook uses to work
quickly and reliably. At the same time, it is also designed to be easy to use.
17.2. Windows Activation
To protect against software piracy, Microsoft has introduced product activation. The
Windows® 8 version installed on your Notebook and supplied with the Notebook
must be activated to enable you to use of all Windows® 8 functions.
To do this, you require simply an Internet connection. The activation process is fully
automatic; no personal data will be transmitted.
If no Internet connection is available, select telephone activation as follows:
 Move the mouse pointer into the top right or bottom corner of the display and
click
Settings.
 Next, click Change PC settings.
 Select the Activate Windows item.
 Now click Activate by phone.
 Click Next after choosing your country.
 Call one of the specified hotlines on the telephone and read out the column of
figures displayed when prompted to do so.
 You will then be given a confirmation ID over the telephone.
Enter this in the empty field and click Activate.
PLEASE NOTE!
If you have not activated Windows® 8, not all functions will be available
to you under PC settings. A watermark will also continue to be displayed
at the bottom right on the traditional desktop.
44 of 72
17.3. Windows® 8 – What’s New
17.3.1. Microsoft Account
A Microsoft account is an e-mail address and password for logging in to Windows®
8. You can use any e-mail address. We recommend using the address you use to
communicate with friends and log into your favourite web sites, however.
The Microsoft account also allows you to purchase or download apps from the
Store and install them on up to five devices.
Once you have logged on to your Notebook using a Microsoft account, you also
have access to the various services and programs provided by Microsoft.
• The contact information and status updates for your friends from services such
as Hotmail, Facebook, Twitter and LinkedIn will be updated automatically as
soon as you run these services using your Microsoft account.
• You can also access and share your photos, documents and other files via
SkyDrive, Facebook and Flickr.
• Your personal settings, including designs, language settings, Internet favourites
and apps will be synchronised with each PC running Windows® 8 that you log on
to.
• You can obtain Apps from the Windows® 8 Store. You can use these on any PC
running Windows® 8 that you log on to.
If you wish to create a Microsoft account in Windows® 8, proceed as follows:
 Move the mouse pointer into the top right or bottom corner of the screen and
click
Settings.
 Click Change PC settings. > Users > Switch to a Microsoft account.
45 of 72
17.3.2. Taskbar (Desktop Mode)
You can start programs from the taskbar at the bottom of the screen and switch
between programs already running. In Windows® 8 you can place any program
onto the taskbar, so that you can always open it with a single click. You can also
rearrange the icons on the taskbar by simply clicking on them and dragging them
to the desired position. Move the mouse pointer over the icons and thumbnails of
each file or each open window and that program will be displayed. If you move the
mouse pointer over the thumbnail, a full screen preview of the window in question
appears. When you move the mouse pointer away from the thumbnail again, the
full screen preview closes.
17.3.3. Jump Lists
Jump lists offer a practical way of calling up recently opened files. To display the
recently used files, simply right-click on the application icon in the taskbar. Thus if
you right-click on the Word icon, the recently used Word documents are displayed.
You can also easily place other files you wish to have easily to hand in the jump list
so that they are always displayed. This allows you to access documents that you use
frequently in just a few mouse clicks.
The jump lists for certain programs such as Windows® 8 Media Player can be
populated in advance with frequently used commands. Thus, for example, you
will see options to play all music or to reopen the last playlist in the jump list for
Windows® 8 Media Player.
The frequently visited and last visited websites are displayed in the jump list for
Internet Explorer. This therefore allows you to quickly access commands for certain
programs that could previously only be called up from the program itself, such as
the command to compose a new e-mail message.
17.3.4. Improved Desktop
Windows® 8 simplifies working with windows on the desktop. You therefore have
more intuitive options for opening and closing, changing sizes and rearranging.
Windows® 8 makes completing everyday tasks even simpler. The locking function
(snaps) makes it easier to compare two open windows, for example. You do not
need to manually adjust the size of the opened windows to make a comparison.
Simply drag the window to one of the screen margins using the mouse and it will
fill half of the screen.
Click the window’s title bar, “shake” it and all other opened windows are displayed
as icons on the task bar. “Shake” the window once more and the other windows are
displayed again.
46 of 72
17.3.5. Improved Device Management
Windows® 8 allows you to connect, manage and use all devices via the central
“Devices” function.
All devices are shown in a central location.
With the new “Device Stage” technology, however, Windows® 8 goes one step
further with device management. Device Stage helps you to use all compatible
devices that are connected to the computer. Thanks to Device Stage you can now
display the device status and perform frequently used commands within a single
window. Here you will even find images of the devices so you can easily see which
devices are connected. The device manufacturers can even adjust Device Stage. For
example, if your camera manufacturer releases an updated version of Device Stage,
you can see details such as the number of photos on the camera and get links to
useful information when you connect the camera to your Notebook.
17.3.6. Home Group
With home network groups, a Windows® 8 function, connecting home computers
becomes child’s play. A home network group is set up automatically when you
connect the first PC running Windows® 8 to the home network. Adding additional
PC’s running Windows® 8 to the home network group can be done very quickly.
You can specify precisely what should be shared on each PC with all other PCs in
the home network group. Sharing files on the various home PCs – and on many
other devices – is then as easy as if all the data were located on a single hard drive.
Thus, you can save digital photos on the computer in the study and then access
them easily on a Notebook in any other room. Similarly, the printer in the study is
automatically shared among all PCs in the house once they are part of the home
network group.
17.4. Overview
The greatest innovation with Windows® 8 is the Start screen.
This key element replaces the Start menu in Windows® 8.
Here you can run all the main programs and services.
As with previous versions, operation is by inputting commands using the mouse or
keyboard.
The Start screen can be opened at any time using the
(Win) key. This key
also allows you to switch back and forth between the Start screen and an active
application. To switch to an application other than the last one opened, press the
Win+Tab keyboard shortcut.
A central feature of the Start screen are the tiles which each represent an
application or function. They are shown in blocks and you can define the number of
blocks and their columns yourself.
Drag & drop the tiles to the desired position using the mouse.
47 of 72
17.4.1. Logging in to Windows
To be able to work with Windows® 8, you must set up a Windows® 8 user account.
 Move the mouse pointer into the top right or bottom corner of the display,
move the mouse down and click
Settings.
 Next, select Change PC settings.
 Open the User category.
 Select Add a user, to set up additional user accounts.
Windows® 8 allows you to log in using 3 different login procedures. Windows® 8
gives you the choice of standard login by password, a PIN or an image code. To set
up a PIN or image code, you must first have set up a password for Windows ® 8.
17.4.2. Setting up a Password for Windows
 Move the mouse pointer into the top right or bottom corner of the display and
click
Settings.
 Next, click Change PC settings.
 Select the User item.
 Click Change your Password and follow the instructions.
17.4.3. Setting a PIN for Windows
 Move the mouse pointer into the top right or bottom corner of the display and
click
Settings.
 Next, click Change PC settings.
 Select the User item.
 Click Create a PIN and follow the instructions.
17.4.4. Setting Up an ImageCode for Windows
 Move the mouse pointer into the top right or bottom corner of the display and
click
Settings.
 Next, click Change PC settings.
 Select the User item.
 Click Create a Picture password and follow the instructions.
PLEASE NOTE!
The image code login has been specially designed for touch screen
devices. In devices without a touch screen, use the mouse instead of
finger movements or gestures. To be able to use all Microsoft services
you need to log in using a Microsoft account.
48 of 72
17.5. Linking a User Account to a LiveID
You can link your user account to a LiveID. This enables you to log in to any
computer or mobile device connected to the Internet using your LiveID.
 Move the mouse pointer into the top right or bottom corner of the display,
move the mouse down and click
Settings.
 Next, select Change PC settings.
 Open the User category.
 Select Switch to a Microsoft account.
 Now enter your Windows Live ID e-mail address.
If you have not yet created a Windows Live ID account or added an e-mail
address to your Windows Live ID account, you can create and edit your Windows
Live ID account at http://www.windowslive.com/.
 Follow the instructions on the screen to complete the link.
49 of 72
17.6. Windows® 8 Start Screen
Once the operating system is running, you will see the new Windows® 8 Start
screen.
(image similar)
Information such as the following may be displayed here, for example:
Windows® 8
App
Windows® 8 apps are executable programs.
The “Desktop” tile opens the traditional
Windows display.
The Internet Explorer tile launches Internet
Explorer
PLEASE NOTE!
Apps are applications that are displayed on a desktop with a program
thumbnail. The app thumbnails are bigger than the standard tiles.
50 of 72
17.7. Windows® 8 Desktop
This image shows a symbolic representation of additional programs.
(image similar)
Information such as the following may be displayed here, for example:
Classic
desktop
apps
Desktop apps are applications that are displayed on a
desktop with a program thumbnail. The app thumbnails
are bigger than the standard tiles.
The classic “Power Recover” desktop app launches the
system recovery program.
The classic “Microsoft Office” desktop app launches the
Microsoft Office program.
Windows® 8 apps from third-party suppliers are displayed as follows.
Example:
Windows® 8
apps from
third-party
suppliers
These Windows® 8 apps are executable
programs from third-party suppliers.
This Windows® 8 app launches the “PowerDVD”
program.
This Windows® 8 app launches the “YouCam”
program.
51 of 72
17.7.1. Working with Windows® 8 and Cassic Apps
Menu
Opening an app
Closing an app
Instructions
 Click the desired app with the left mouse
button.
PLEASE NOTE!
Not all apps need to be closed!
Windows® 8 closes unused apps
automatically.
 Press the Alt+F4 keyboard shortcut.
 Click on the top edge of the running app and
drag the app down to the edge of the display.
Displaying all apps
 Right-click on the Start screen.
 Click All Apps in the bottom right-hand
corner of the display.
Linking apps
to the Start screen
 Right-click on the Start screen.
 Click All Apps in the bottom right hand
corner of the display.
 Right-click on the desired app to highlight it.
 Click Pin to Start in the bottom left-hand
corner of the display.
Linking apps to the taskbar
 Right-click on the Start screen.
 Click All Apps in the bottom right-hand
corner of the display.
 Right-click on the desired app to highlight it.
 Click Pin to Taskbar in the bottom left-hand
corner of the display.
Installing an app
 Run the Store app.
 Search for the desired app and click Install.
The app will now be downloaded and
installed in the background.
52 of 72
Uninstalling an app
 Right-click on the Start screen.
 Click All Apps in the bottom right hand
corner of the display.
 Right-click the desired app.
 Click Uninstall at the bottom edge of the
display.
PLEASE NOTE!
Not all apps can be uninstalled. If the
Uninstall option is not displayed, this
app can not be uninstalled.
Running apps as administrator  Right-click the desired app.
(Only possible with desktop
 Now click Run as administrator on the
apps)
bottom edge of the display.
Running an app in a new
window
(Only possible with desktop
apps)
 Right-click the desired app.
 Click Open new window at the bottom edge
of the display.
Searching for apps
 Move the mouse pointer into the top righthand corner of the display, move the mouse
down and click Search.
 Enter the name of the app.
Arranging apps
 Click and hold the left mouse button down
on the desired app and drag it to the desired
position.
Selecting multiple
apps
 Right-click the desired apps.
53 of 72
17.8. Using the Search Function
Use the search function to find individual tasks, settings or apps quickly.
 Move the mouse pointer into the top right or bottom corner of the display and
click Search.
 Enter the name of the app or file and select an entry from the results list on the
left-hand side of the display.
The search results are arranged by Apps, Settings and Files. Choose the category
(Apps, Settings or Files) in which the desired file is located.
18. Control Panel
The Control Panel allows you to customise the Start interface.
PLEASE NOTE!
Windows® 8 must be activated for changes to be made.
 Move the mouse pointer into the top right or bottom corner of the display and
click
Settings.
 Next, click Change PC settings.
Menu
Instructions
Activate Windows
 Activate Windows® 8 by telephone or over the Internet.
Customise
 Set the background image for the
lock screen and the Start screen here.
 Select a profile image here.
User
 Create and update user accounts here.
Set or modify the PIN or image code.
Notifications
 Set the various program instructions to On or Off here.
Search
 Define the settings for the
search function here.
 Define the app the search function should work with
here.
Sharing
 Define the settings for the share function here.
 Define the apps to be shared here.
General
 Configure the general settings for time zone, spell
checking, language and memory here.
 Reinstall the operating system without losing personal
user data or key basic settings.
 Restore your Notebook to its factory settings.
 Perform a reboot with a CD inserted.
54 of 72
Data protection
 Configure the security settings for apps, accounts and
Windows® 8 here.
Devices
 Install additional external connected devices here, e.g.
joystick or USB speaker.
 Enable or disable Download over metered
connections. This function prevents drivers for newly
added devices being searched for and downloaded via
the Internet.
Wireless
 Enable or disable flight mode here.
 Enable or disable the integrated WLAN function here.
Simplified
operation
 Customise the contrast, mouse pointer and tab bar to
your requirements here.
Synchronise
settings
 Configure synchronisation of your Notebook with the
connected network.
 Configure here whether or not an online
synchronisation should also be performed with payable
networks.
Home network
group
 Here you will see the home network group and the apps
and files shared within it.
Windows Update
 Allow Windows® 8 to search the Internet for any
necessary Windows® 8 updates.
18.1. Windows® 8 Power On/Off Functions
The new Windows® 8 allows you to restart your Notebook, put it into sleep mode or
shut it down.
Changes can be made to the sleep settings at any time in the power options.
In sleep mode the content of your Notebook’s RAM is preserved while practically
all other components of your Notebook are disabled or their power consumption
reduced to a minimum. For example, if you flip the Notebook shut, it puts it into
sleep mode and it is automatically restarted upon opening.
Restarting
 Move the mouse pointer into the top right or bottom corner
of the display, move the mouse down and click
Settings.
 Now click Power and select Restart.
Your Notebook will now restart.
Sleep
 Move the mouse pointer into the top right or bottom corner
of the display, move the mouse down and click
Settings.
 Now click Power and select Sleep .
Your Notebook will now switch to sleep mode.
55 of 72
Shut down
 Move the mouse pointer into the top right or bottom corner
of the display, move the mouse down and click
Settings.
 Now click Power and select Shut down.
18.2. Control Panel Settings
You can change Windows® 8 settings using the control panel. These settings control
virtually everything about how Windows® 8 appears and functions and enable you
to customise Windows® 8 to meet your requirements.
When the control panel is run for the first time, some of the most frequently used
control panel elements are displayed grouped together by category.
If you require additional information about a control panel element in the category
view, you must hold the mouse pointer over the icon or category name and read
the text shown there.
To run one of these elements, click on the associated icon or category name.
A list with executable tasks and a selection of individual control panel elements
opens for some of these elements.
To launch the control panel, proceed as follows:
 Move the mouse pointer into the top right or bottom corner of the display and
click Search.
 Enter Control Panel in the search field.
 Click on Control Panel.
18.3. Resetting the Notebook to its Factory Settings
In the event of problems with the installation or other software problems which
make it necessary to reinstall the software, Windows® 8 offers three options for
reinstalling Windows® 8 on your Notebook.
First ensure that you have backed up all important data and programs.
56 of 72
18.3.1. Running System Restore
 After restarting, press the F11 key or start up the Notebook with the F11 key
held down to launch PowerRecover.
or
 Click the PowerRecover Windows® 8 desktop app to run the program from the
Windows® 8 desktop.
You will be offered 3 possible options:
− Burn Drivers and Tools to an Optical disc
Create a support disc
− Refresh your PC without affecting your files
Update your Notebook without deleting your data.
− Restore
Choose between two recovery options:
● Restore to HDD – no backup of user data
All data on the Notebook will be permanently deleted.
The factory settings will be restored.
● Restore to HDD – with backed up user data
The factory settings will be restored and all user data under C:\USER will
be backed up.
PLEASE NOTE!
Always perform any type of recovery using mains power.
CAUTION!
The recovery process takes a long time when you select the
option to back up user data. Only the data located in the
folder C:\USER will be backed up. All other data will be deleted.
It is therefore important to perform regular data backups
to external data media. We do not accept any liability for
claims for compensation arising from the loss of data or any
consequential damages incurred.
 Click Next and follow the on screen instructions to restore the factory settings.
57 of 72
18.4. UEFI firmware configuration
The UEFI firmware configuration (basic hardware configuration of your system)
provides you with a number of options for the configuration and operation of your
notebook. For example, you can modify the operating mode for interfaces, security
features or power supply management. The Notebook has already been configured
by the manufacturer to ensure optimum operation.
CAUTION!
Please only change settings where strictly necessary and if you
are familiar with the configuration options.
18.4.1. Executing the UEFI firmware configuration
You can only run the configuration program upon system startup. If the Notebook
has already started up, switch it off and restart it. Press the F2 key to run the UEFI
firmware configuration.
18.5. Windows® 8 – Help and Support
Here you will find a comprehensive collection of instructions, help sections and
troubleshooting suggestions.
This help covers the entire spectrum of the Windows® operating system.
It is recommended for both beginners and experts. The information is subdivided
into topics and can be printed out or bookmarked. Start as follows:
 Move the mouse pointer into the top right or bottom corner of the display,
move the mouse down and click
Settings.
 Now click on Help.
 Choose the topic you are interested in.
58 of 72
19. FAQ – Frequently Asked Questions
Do I need to install the discs supplied?
− No All programs are preinstalled. The discs are provided as backup copies
only.
Where can I find the necessary drivers for my Notebook?
− The drivers can be found in the second hard drive partition in the
Drivers and Tools folders.
What is Windows® 8 activation?
− You will find a relevant section in these operating instructions containing
detailed information on this topic.
How do I activate Windows® 8?
− Windows®8 is activated automatically as soon as an Internet connection is
established.
How do I activate Windows® 8 without an Internet connection?
− Windows® 8 can also be activated over the telephone. Follow the instructions
in the section “„Windows Activation“ to activate Windows® 8 by telephone.
When is restoring factory settings recommended?
− This method should only be selected as a last resort. Read about the
alternatives in the System recovery section.
How do I perform a data backup?
− Perform a backup or backup synchronisation of selected data onto external
media to familiarise yourself with the technology. A backup is of no use if
you are unable to recover the data or if the medium is faulty or is no longer
available.
Why do I need to reinstall my USB device even though I have already done it?
− If the device is not operated on the same USB port as the one it was installed
in, it automatically receives a new identifier. The operating system then treats
it like a new device and tries to reinstall it.
− Use the installed driver or connect the device to the port on which it was
originally installed.
59 of 72
20. Customer Service
20.1. What To Do In Case of Hardware Problems
Malfunctions can sometimes have quite trivial causes, but they may also be the
result of defective components. We have included a brief troubleshooting guide
below which may help to solve any problems.
If these tips don’t do the trick, then we’ll be more than pleased to assist you. Just
give us a call!
20.2. Find The Cause
Start by carefully checking all the cable connections. If the indicator lamps are
not on, ensure that the Notebook and all peripheral devices are connected to the
power supply.
• If you are in battery mode, connect the Notebook to the mains adapter and
check that the battery is charged.
• If you wish to operate the Notebook using the mains adapter, disconnect the
mains adapter from the socket and connect an electrical appliance such as a
lamp to the same socket to test it. If the lamp does not work either, seek the
advice of an electrician.
• Turn off the Notebook and check all cable connections. If the Notebook is
connected to peripheral devices, check all cable connections. Do not swap
around the cables for the various devices, even if they look alike. The pin
assignment within the cables may be different. Once you have ensured that the
device’s power supply is functioning and all connections are intact, then switch
the Notebook back on.
60 of 72
20.2.1. Faults and Possible Causes
The screen is black.
• This fault can have various causes:
− The operating light (on/off switch) does not light up and the Notebook is in
hibernation.
Solution:
Press the on/off switch.
− The sleep light is flashing. The Notebook is in sleep mode.
Solution:
Press the on/off switch.
− The background lighting has been disabled using the Fn+F7 keyboard
shortcut.
Solution:
Reactivate the background lighting by pressing any key.
The Notebook turns itself off during operation.
 The battery may be flat. Plug the Notebook in using the mains adapter and
charge the battery.
The Notebook cannot be switched on.
 If you are running the Notebook on batteries, check that they have been
inserted correctly and are fully charged.
No data can be read by the optical drive.
 Check whether the disc has been inserted correctly.
The WLAN/Bluetooth connections do not work.
 Check that flight mode is disabled.
The touchpad is not working.
 To activate the touchpad, press the Fn + F9 keyboard shortcut.
Apps (e.g. the weather app) cannot be displayed as live tiles.
 Check the date, time zone and time.
61 of 72
20.3. Do You Need More Help?
You’ve checked through the suggestions in the previous section and you’re still
having problems with your device? Then call our hotline or contact us at www.
medion.com. We’ll be glad to help you.
Before contacting your technology centre, however, prepare the following
information:
• Have you made any upgrades or modifications to the initial configuration?
• What peripheral devices do you use?
• What messages, if any, appear?
• What software were you using when the problem occurred?
• What steps have you already taken to try and rectify the problem?
20.4. Driver Support
The system has been thoroughly and successfully tested with the installed drivers
in our test laboratory. It is normal in the computer sector, however, for the drivers
to need updating from time to time. This is because there may be compatibility
problems with other components (programs, devices) which have not yet been
tested. You can find current drivers on the Internet at the following address:
http://www.medion.com
Please use the service address for the country where the device was purchased.
62 of 72
20.5. Transport
Please note the following information if you wish to transport the Notebook:
• Switch the Notebook off. This ensures that the hard drive heads are
automatically moved to a safe area to avoid damage. Remove any inserted
DVDs/CDs.
• After transporting the Notebook, wait until the appliance has reached
room temperature before switching it on. Large changes in temperature or
fluctuations in humidity can cause moisture build-up within the Notebook due
to condensation. This can cause an electrical short circuit.
• Close the Notebook and check that the lid is firmly closed.
• Always use a Notebook carrying case to protect the Notebook from dirt,
moisture, vibrations and scratches.
• Always use the original cardboard packaging to ship your Notebook and obtain
advice on this from your carrier.
• Always charge your battery and any spare batteries fully before embarking on
longer trips and do not forget to take along your mains adapter.
• Find out about the power and communication options available in your
destination before travelling.
• Where necessary, purchase the required power or communication adapter (LAN
etc.) before departure.
• When shipping the Notebook, pack the battery separately in the cardboard
packaging.
• When going through the hand luggage check at the airport it is recommended
that you send the Notebook and all magnetic storage media (external hard
drives) through the x-ray facility (the device that scans your bags). Avoid the
magnetic sensor (the structure that you walk through) or the magnetic hand
scanner (the manual device used by security personnel) as this may destroy your
data, among other things.
63 of 72
20.6. Maintenance
CAUTION!
None of the parts inside the Notebook housing require
cleaning or maintenance.
You can increase the lifespan of your Notebook with the following
measures:
• Always unplug the device, disconnect all cables and remove the
battery before cleaning.
• Clean the Notebook with a damp, lint-free cloth.
• Do not use solvents, corrosive or aerosol-based detergents to clean
the device.
• Do not use CD-ROM cleaning discs or similar products that clean
the lens of the laser to clean your optical drive.
• Dust or grease on the touchpad can affect its sensitivity. Remove
the dust or grease from the surface of the touch pad with a strip of
adhesive tape.
• Over time, dust can collect inside the Notebook which then
blocks the vents. This can lead to an increase in the fan speed and,
therefore, also increase the operating volume of your Notebook. It
can also lead to overheating and malfunctions. Therefore, have the
interior of the Notebook cleaned by your service department or a
specialist at regular intervals.
64 of 72
20.7. Care of the Display
•
•
•
•
•
Close the Notebook when you are not working with it. Avoid scratching the
surface of the screen because it can be easily damaged.
Make sure that no water droplets remain on the screen. Water can cause
permanent discolouration.
Clean the screen with a soft, lint-free cloth.
Do not place the screen in strong sunlight or near ultraviolet light.
The Notebook and its packaging can be recycled.
PLEASE NOTE!
The surfaces of the device are covered in protective film to prevent
scratching during production and transport.
Remove the film once the device has been set up properly and before
you use it.
21. Upgrading/Modifying and Repair
• Upgrades and modifications to your Notebook should only
be carried out by qualified specialists. If you do not have the
necessary qualifications, have the work carried out by a qualified
service technician. Please contact your customer service
department if you have technical problems with your Notebook.
• If a repair must be carried out, please contact only our authorised
service partners.
65 of 72
21.1. Notes for Service Technicians
• Only service technicians may open up the Notebook housing or
upgrade or modify your Notebook.
• Use only original replacement parts.
• Before opening the housing, disconnect all power and
connecting cables and remove the battery. If the Notebook is not
disconnected from the power supply before being opened, there
is a risk that components could be damaged.
• Internal components of the Notebook may be damaged by
electrostatic discharge (ESD). Carry out repairs, as well as system
enhancements or modifications, at an ESD workplace. If such a
workplace is not available, wear an antistatic cuff or ensure you are
touching an earthed, metallic object. We will charge for any repairs
to damage caused by incorrect handling.
21.2. Information on Laser Radiation
• The Notebook can contain laser equipment classified as laser class
1 to laser class 3b. The equipment meets the requirements for laser
class 1.
• By opening the housing of the optical drive, you will have access to
laser equipment classified up to laser class 3b.
The following should be observed when removing and/or opening
this laser equipment:
• The integrated optical drive contains no parts that require repair or
maintenance.
• Repairs to the optical drive should only be carried out by the
manufacturer.
• Do not look directly into the laser beam, even when using optical
instruments.
• Do not expose the laser beam. Avoid exposing your eyes or skin
to the laser beam – either directly or through scattered laser
radiation.
66 of 72
22. Recycling and Disposal
Should you have any questions concerning the disposal please contact your dealer
or customer service.
Packaging
Your device has been packaged to protect it against transportation
damage. Packaging is raw material and can be re-used or added to the
recycling system.
Device
At the end of its life, the device should not be disposed of in household
rubbish. Enquire about the options for environmentally friendly and
appropriate disposal.
Batteries
Do not dispose of used or defective batteries in the household rubbish!
They should be taken to a collection point for used batteries.
.
67 of 72
23. European EN 9241-307 Class II Standard
For active matrix LCDs (TFT) with a resolution of 1366 x 768 pixels, each of which
consist of three sub-pixels (red, green, blue), there are a total of approx. 3.1 million
control transistors in use. Due to this very high number of transistors and the
associated extremely complex manufacturing processes used, occasionally one or
more pixels can fail or become incorrectly controlled.
In the past, there were a number of approaches for defining the permitted number
of pixel defects. However, these approaches were mostly very complicated and
varied from one manufacturer to the next. When handling warranty issues for all
of its display products, MEDION therefore adheres to the strict and transparent
requirements of the standard ISO 9241-307, Class II; which has been briefly
summarised below.
The EN 9241-307 standard defines, amongst other things, the generally applicable
guidelines relating to pixel defects. Pixel defects are categorised into four fault
classes and three defect types. Every individual pixel consists of three sub-pixels,
each of which is assigned a basic colour (red, green, blue).
Pixel structure
5 Pixel
5 Pixel
Rows
Pixel
blue
green
Sub-Pixel
68 of 72
red
Pixel defect types:
• Type 1:
permanently illuminated pixel (bright, white dot) even when not activated. A
white pixel occurs due to the illumination of all three sub-pixels.
• Type 2:
non-illuminated pixel (dark, black dot) even when activated.
• Type 3:
abnormal or faulty red, green or blue sub-pixel (e.g. permanently illuminated at
half brightness, one colour not illuminated, flashing or flickering but not type 1
or 2)
Supplement: Type 3 cluster (= failure of two or more sub-pixels within a 5 x 5 pixel
block). A cluster is a field of 5 x 5 pixels (15 x 5 sub-pixels).
EN 9241-307, error class II
Resolution
Type 1
Type 2
Type 3
1024 x 768
1280 x 800
1280 x 854
1280 x 1024
1366 x 768
1400 x 1050
2
3
3
3
3
3
2
3
3
3
3
3
4
6
6
7
7
8
Cluster
Type 1, type 2
0
0
0
0
0
0
Cluster
Type 3
2
3
3
3
3
3
69 of 72
23.1. FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. Shielded
interface cables, if any, must be used in order to comply with the emission limits.
24. Legal notice
Copyright © 2013
All rights reserved.
This operating manual is protected by copyright.
Mechanical, electronic and any other form of reproduction is
prohibited without the written permission of the manufacturer
Copyright is owned by the company:
Medion AG
Am Zehnthof 77
45307 Essen
Germany
Subject to technical and optical changes as well as printing errors.
The operating manual can be reordered via the service hotline and is available for
download via the service portal at www.medion.com/gb/service/start/.
You can also scan the QR code above and download the operating manual onto
your mobile device via the service portal.
70 of 72
25. Index
B
Battery Mode ..............................................21
Charging the Battery ...........................23
Discharging the Battery .....................23
Inserting the Battery ...........................21
Removing the Battery .........................22
Battery Performance ................................23
Blank CDs and DVDs .................................36
Bluetooth......................................................40
C
Cabling ..........................................................12
Connecting an External Monitor .........27
Connections ................................................11
Control Panel........................................ 54, 56
Customise................................................54
Data protection .....................................55
Devices .....................................................55
General .....................................................54
Home network group .........................55
Notifications ...........................................54
Search .......................................................54
Sharing .....................................................54
SimplifiedOperation ............................55
Synchronise settings ...........................55
User ............................................................54
WindowsActivate..................................54
Windows Update ..................................55
Wireless ....................................................55
Customer Service ......................................60
D
Data Backup ...................................................9
Data Input ....................................................28
Declaration of Conformity ........................6
Driver Support ............................................62
E
Energy Star...................................................70
Ergonomics ..................................................10
European Standard ...................................68
External Audio Connections..................37
F
Factory Settings .........................................56
FAQ .................................................................59
H
Help and Support ......................................58
Home Group................................................47
I
Improved Desktop ....................................46
Improved Device Management ...........47
J
Jump Lists ....................................................46
K
Kensington Security Lock .......................43
L
Logging in to Windows ...........................48
Setting a PIN for Windows .................48
Setting Up an Image Code for
Windows .............................................48
Setting Up a Password for
Windows .............................................48
M
Microphone Socket ..................................16
Multi-Card Reader
Inserting a Memory Card ...................41
MMC ..........................................................41
Removing Memory Cards ..................41
SD ...............................................................41
O
Operating Safety...........................................7
Optical Drive
Emergency Release of a Blocked Disc
35
Inserting a Disc ......................................34
Playing/Reading Discs ........................35
Regional Playback Information for
DVDs .....................................................35
P
Power Supply ..............................................11
R
Recycling and Disposal ...........................67
Restarting .....................................................55
71 of 72
S
Saving Energy .............................................55
Sleep ..............................................................55
Software........................................................43
Getting to know Windows® 8 ...........44
Windows® 8 – What’s New .................45
Windows activation .............................44
T
Taskbar ..........................................................45
Touchpad............................................... 15, 30
Two-Finger Touchpad Operation ....31
Transport ......................................................63
U
Upgrades/Modifications .........................65
Information on laser radiation .........66
Notes for service technicians ...........66
W
Webcam ................................................. 15, 41
Windows® 8 Desktop................................50
Desktop apps .........................................51
Windows® 8 Start Screen ........................49
Windows® 8 app ....................................50
Wireless LAN................................................38
Flight Mode ............................................40
Requirements.........................................39
Working With Apps ...................................52
72 of 72