Canon Power Shot A400 User guide

Add to my manuals
142 Pages

advertisement

Canon Power Shot A400 User guide | Manualzz

ENGLISH

Camera User Guide

CDI-E140-010 © 2004 CANON INC.

PRINTED IN CHINA z Please read the Read This First section (p. 5).

z Please also see the Software Starter Guide and the Direct Print User Guide.

l

Flowchart and Reference Guides

This Guide

Shooting with the Camera

Software Starter Guide

Installing the Software

This Guide

Connecting the Camera to a Computer

This Guide

Software Starter Guide

Downloading Images to a Computer

Use of genuine Canon accessories is recommended.

This product is designed to perform optimally when used with genuine Canon accessories.

Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this warranty does not apply to repairs arising out of the malfunction of non-genuine Canon accessories, although you may request such repairs on a chargeable basis.

Direct Print User Guide

Printer User Guide

Using the Printer and Printing

Camera Body Temperature

If your camera is used for prolonged periods, the camera body may become warm. Please be aware of this and take care when operating the camera for an extended period.

About the LCD Monitor

The LCD monitor is produced with extremely highprecision manufacturing techniques. More than

99.99% of the pixels operate to specification. Less than 0.01% of the pixels may occasionally misfire or appear as red or black dots.

This has no effect on the recorded image and does not constitute a malfunction.

Video Format

Please set the camera’s video signal format to the one used in your region before using it with a TV monitor (p. 104).

Language Setting

Please see page 22 to change the language setting.

Disclaimer z While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. Canon reserves the right to change the specifications of the hardware and software described herein at any time without prior notice.

z No part of this guide may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without the prior written permission of Canon.

z Canon makes no warranties for damages resulting from corrupted or lost data due to a mistaken operation or malfunction of the camera, the software, the SD memory cards

(SD cards), personal computers, peripheral devices, or use of non-Canon SD cards.

1

Trademark Acknowledgments

• Canon and PowerShot are trademarks of Canon,

Inc.

• Macintosh, PowerBook, Power Macintosh and

QuickTime are trademarks of Apple Computer,

Inc, registered in the United States and other countries.

• Microsoft, Windows, and Windows NT are either registered trademarks or trademarks of Microsoft

Corporation in the United States and/or other countries.

• SD is a trademark.

• Other names and products not mentioned above may be registered trademarks or trademarks of their respective companies.

Copyright © 2004 Canon Inc. All rights reserved.

Symbols Used

Icons under title bars show the operations mode.

As in the example below, the shooting mode should be set to , , or .

Adjusting the Tone (White Balance)

Shooting Mode

This mark denotes issues that may affect the camera's operation.

This mark denotes additional topics that complement the basic operating procedures.

In this guide SD memory card (Secure Digital, a copyright protection system) is referred to as SD card.

2

Table of Contents

Items marked with are lists or charts that summarize camera functions or procedures.

Read This First 5

Please Read ...........................................................5

Safety Precautions .................................................6

Preventing Malfunctions .......................................11

Components Guide 12

Preparing the Camera 15

Installing the Battery and SD Card .......................15

Formatting an SD Card.........................................19

Setting the Date/Time...........................................21

Setting the Language ...........................................22

Basic Functions 23

Turning the Power On/Off.....................................23

Mode Switch .........................................................25

Using the LCD Monitor .........................................26

Shooting – The Basics 31

Auto Mode.......................................................31

Reviewing an Image Right After Shooting............34

Selecting a Shooting Mode...................................35

Changing the Resolution and Compression .........37

Quick Shots ..........................................................38

Using the Flash .................................................39

Macro/ Infinity Modes ................................... 42

Self-timer ......................................................... 43

Digital Zoom ......................................................... 44

Continuous Shooting........................................ 45

Shooting Panoramic Images (Stitch Assist) ......... 46

Special Scene Mode..................................... 48

Postcard Print Mode ...................................... 51

Movie Mode ................................................... 53

Playback – The Basics 55

Displaying Images Individually

(Single Image Playback) ...................................... 55

Magnifying Images ........................................... 55

Viewing Images in Sets of Nine (Index Playback) ... 56

Jumping between Images .................................... 57

Viewing/Editing Movies ........................................ 57

Erasing 61

Erasing Single Images..................................... 61

Erasing All Images ............................................... 61

Shooting – Advanced Functions 62

Selecting Menus and Settings.............................. 62

Menu Settings and Default Settings ..................... 65

Resetting the Settings to Default.......................... 72

Shooting Problem Subjects for the Autofocus...... 73

Switching between Focus Settings....................... 74

3

4

Table of Contents

Switching between Light Metering Modes .......75

Adjusting the Exposure.........................................76

Adjusting the Tone (White Balance) .....................77

Changing the ISO Speed......................................79

Changing the Photo Effect....................................80

Setting the Auto Rotate Function..........................81

Playback – Advanced Functions 83

Rotating Images in the Display.............................83

Attaching Sound Memos to Images......................84

Auto Play ..............................................................85

Protecting Images.................................................86

Various Functions 88

About Printing .......................................................88

DPOF Print Settings .............................................90

Image Transmission Settings

(DPOF Transfer Order).........................................94

Downloading Images to a Computer ....................95

Computer System Requirements .................... 96

Downloading Directly from a SD card.................103

Viewing Images on a TV Set ..............................103

Resetting the File Number..................................105

Customizing the Camera

(My Camera Settings).........................................106

Registering My Camera Settings........................108

List of Messages 112

Troubleshooting 114

Appendix 120

Replacing the Date Battery ................................ 120

Using the Power Kits (Sold Separately) ............. 121

Camera Care and Maintenance ......................... 125

Specifications 126

Battery Performance .......................................... 129

SD Cards and Estimated Capacities (Recordable

Images) .............................................................. 129

Photo Tips and Information 132

Index 134

Functions Available in Each Shooting Mode ...... 138

Read This First

Please Read

Test Shots

Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated correctly. Please note that Canon, its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including SD cards, that results in the failure of an image to be recorded or to be recorded in a format that is machine readable.

Warning Against Copyright Infringement

Please note that Canon digital cameras are intended for personal use and should never be used in a manner that infringes upon or contravenes international or domestic copyright laws and regulations.

Please be advised that in certain cases the copying of images from performances, exhibitions, or commercial properties by means of a camera or other device may contravene copyright or other legal rights even if the image was shot for personal use.

Warranty Limitations

This camera's warranty is only effective in the country of sale. If a problem arises while the camera is in use abroad, please convey it back to the country of sale before proceeding with a warranty claim to a

Canon Customer Support Help Desk.

For Canon Customer Support contacts, please see the Canon Limited Warranty supplied with your camera.

5

Read This First

Safety Precautions

z Before using the camera, please ensure that you have read and understood the safety precautions described below. Always ensure that the camera is operated correctly.

z The safety precautions noted on the following pages are intended to instruct you in the safe and correct operation of the camera and its accessories to prevent injuries or damage to yourself, other persons and equipment.

z In the next few pages, the term "equipment" refers primarily to the camera, batteries, and separately sold battery and charger kit and compact power adapter.

Storing SD cards

Store the SD memory card out of the reach of children and infants.

It may be swallowed accidentally. If this occurs, consult a doctor immediately.

WARNINGS

z Do not aim the camera directly into the sun or at other intense light sources which could damage your eyesight.

z Do not trigger the flash in close proximity to human or animal eyes. Exposure to the intense light produced by the flash may damage eyesight. In particular, remain at least one meter (39 inches) away from infants when using the flash.

6

Read This First z Store this equipment out of the reach of children and infants. Accidental damage to the camera or batteries by a child could result in serious injury. In addition, placement of the strap around a child's neck could result in asphyxiation.

z Be particularly careful to keep the date battery used in the camera away from children. Seek medical assistance immediately if a child swallows a battery.

z Do not attempt to disassemble or alter any part of the equipment that is not expressly described

in this guide. Disassembly or alteration may result in high-voltage electrical shock. Internal inspections, alterations and repairs should be conducted by qualified service personnel authorized by your camera distributor or a Canon Customer Support Help Desk.

z To avoid the risk of high-voltage electrical shock, do not touch the flash portion of the camera if it

has been damaged. Similarly, never touch internal portions of the equipment that become exposed as a result of damage. There is a risk of high-voltage electrical shock. Please take the first opportunity to consult your camera distributor or a Canon Customer Support Help Desk.

z Stop operating the equipment immediately if it emits smoke or noxious fumes. Failure to do so may result in fire or electrical shock. Immediately turn the camera's power off, remove the camera batteries or unplug the power cord from the power outlet. Confirm that smoke or fume emissions have ceased.

Please consult your camera distributor or the closest Canon Customer Support Help Desk.

z Stop operating the equipment if it is dropped or the casing is damaged. Failure to do so may result in fire or electrical shock. Immediately turn the camera's power off, remove the camera batteries or unplug the power cord from the power outlet. Please consult your camera distributor or the closest

Canon Customer Support Help Desk.

7

Read This First z Do not allow the equipment to come into contact with, or become immersed in, water or other

liquids. Do not allow liquids to enter the interior. The camera has not been waterproofed. If the exterior comes into contact with liquids or salt air, wipe it dry with a soft, absorbent cloth. In the event that water or other foreign substances enter the interior, immediately turn the camera's power off and remove the camera batteries or unplug the power cord from the power outlet. Continued use of the equipment may result in fire or electrical shock. Please consult your camera distributor or the closest Canon Customer

Support Help Desk.

z Do not use substances containing alcohol, benzene, thinners or other flammable substances to

clean or maintain the equipment. The use of these substances may lead to fire.

z Remove the power cord on a regular periodic basis and wipe away the dust and dirt that collects

on the plug, the exterior of the power outlet and the surrounding area. In dusty, humid or greasy environments, the dust that collects around the plug over long periods of time may become saturated with humidity and short-circuit, leading to fire.

z Do not cut, damage, alter or place heavy items on the power adapter cord. Any of these actions may cause an electrical short circuit, which may lead to fire or electrical shock.

z Do not handle the power cord if your hands are wet. Handling it with wet hands may lead to electrical shock. When unplugging the cord, ensure that you hold the solid portion of the plug. Pulling on the flexible portion of the cord may damage or expose the wire and insulation, creating the potential for fires or electrical shocks.

z Use only the recommended power accessories. Use of power sources not expressly recommended for this equipment may lead to overheating, distortion of the equipment, fire, electrical shock or other hazards.

z Do not place the batteries near a heat source or expose them to direct flame or heat. Neither

should you immerse them in water. Such exposure may damage the batteries and lead to the leakage of corrosive liquids, fire, electrical shock, explosion or serious injury.

8

Read This First z Do not attempt to disassemble, alter or apply heat to the batteries. There is serious risk of injury due to an explosion. Immediately flush with water any area of the body, including the eyes and mouth, skin, or clothing that comes into contact with the inner contents of a battery.

z Avoid dropping or subjecting the batteries to severe impacts that could damage the casings. It could lead to leakage and injury.

z Do not short-circuit the battery terminals with metallic objects, such as key holders. It could lead to overheating, burns and other injuries.

z Before you discard a battery, cover the terminals with tape or other insulators to prevent direct

contact with other objects. Contact with the metallic components of other materials in waste containers may lead to fire or explosions. Discard the batteries in specialized waste facilities if available in your area.

z Use only recommended batteries and accessories. Use of batteries not expressly recommended for this equipment may cause explosions or leaks, resulting in fire, injury and damage to the surroundings.

z If using AA-size NiMH batteries, use only Canon AA-size NiMH batteries and the charger

recommended for use with these batteries. Use of another charger may cause batteries to overheat or deform, posing risk of fire or electric shock.

z Disconnect the battery charger or compact power adapter from both the camera and power outlet

after recharging and when the camera is not in use to avoid fires and other hazards. Continuous use over a long period may cause a unit to overheat and distort, resulting in fire.

z The camera terminal of the battery charger cord and the compact power cord is designed for

exclusive use with your camera. Do not use it with other products or batteries. There is a risk of fire and other hazards.

Caution about magnetic fields

Keep objects that are sensitive to magnetic fields (such as credit cards) away from the speaker of the camera (p. 12). Such items may lose data or stop working.

9

Read This First

CAUTIONS

z Avoid using, placing or storing the equipment in places subject to strong sunlight or high

temperatures, such as the dashboard or trunk (boot) of a car. Exposure to intense sunlight and heat may cause the batteries to leak, overheat or explode, resulting in fire, burns or other injuries. High temperatures may also cause deformation of the casing. Ensure that there is good ventilation when using the battery charger to charge the batteries or power the camera.

z Do not store the equipment in humid or dusty areas. Storage in such areas could lead to fire, electrical shock or other damage.

z Be careful not to bang the camera or subject it to strong impacts or shocks that could lead to injury or damage the equipment when wearing or holding it by the strap.

z Be careful not to cover the flash with your fingers or clothing when shooting. The flash may be damaged and emit smoke or noise. In addition, do not touch the surface of the flash after taking several pictures in rapid succession. Either action could result in burns.

z Do not operate the flash with dirt, dust or other items stuck to its lens. The resulting heat build-up could damage the flash.

z Ensure that the battery charger is plugged into a power outlet of the specified rating, not over the

specified rating. The plug of the battery charger varies according to region.

z Do not use the battery charger or compact power adapter if the cable or plug is damaged, or if the plug is not fully inserted into the power outlet.

z Do not allow metal objects (such as pins or keys) or dirt to contact the charger terminals or plug. z If your camera is used for prolonged periods, the camera body may become warm. Please take care when operating the camera for an extended period as your hands may experience a burning sensation.

10

Read This First

Preventing Malfunctions

Avoid Strong Magnetic Fields

Never place the camera in close proximity to electric motors or other equipment generating strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data.

Avoid Condensation Related Problems

Moving the equipment rapidly between hot and cold temperatures may cause condensation (water droplets) to form on its external and internal surfaces. You can avoid this by placing the equipment in an airtight, resealable plastic bag and letting it adjust to temperature changes slowly before removing it from the bag.

If Condensation Forms Inside the Camera

Stop using the camera immediately if you detect condensation.

Continued use may damage the equipment. Remove the SD card and battery or power cord (if connected) from the camera and wait until the moisture evaporates completely before resuming use.

Extended Storage

When not using the camera for extended periods of time, remove the batteries from the camera or battery charger and store the equipment in a safe place. Storing the camera for extended periods with batteries installed will run down the battery and may damage the camera.

11

Components Guide

Strap Mount*

ON/OFF Button (p. 23)

Shutter Button (p. 31)

Microphone (p. 84)

Viewfinder Window

Speaker

Flash (p. 39)

AF-assist Beam (p. 34)

Red-eye Reduction Lamp (p. 41)

Self-timer Lamp (p. 43)

Lens/Lens Cover

* Be careful not to wave the camera about or catch it on other items when dangling it from the wrist strap.

12

LCD Monitor (p. 26)

Viewfinder (p. 33)

Terminal Cover

DIGITAL Terminal* (p. 98)

DC IN Terminal (p. 124)

Components Guide

A/V (Audio/Video) Out Terminal

SD Card Slot/Battery Cover (p. 15)

Date Battery Holder (p. 120)

Battery Cover Lock

Tripod Socket

* To connect the camera to a computer or printer, use one of the following cables.

Computer: Interface Cable IFC-400PCU (supplied with the camera)

Direct Print Compatible Printers (Sold Separately)

• CP Printers: Interface Cable IFC-400PCU (supplied with the camera) or the Direct Interface Cable

DIF-100 (supplied with the CP-100/CP-10)

• Bubble Jet Printers:

- Bubble Jet Direct Compatible Printers: Please refer to your Bubble Jet printer user guide.

- PictBridge Compliant Printers: Interface Cable IFC-400PCU (supplied with the camera)

PictBridge Compliant Non-Canon Printers: Interface Cable IFC-400PCU (supplied with the camera)

Please refer to the System Map or the Direct Print User Guide supplied with the camera for direct print compatible printer information.

13

Components Guide

Mode Switch (p. 25)

Button (p. 63)

(Function) Button (p. 62)/

(Single Image Erase) Button (p. 61)

(Display) Button (p. 26)

Button

Omni Selector (p. 39, 42, 43, 45, 75)

(Light Metering)/ , (Flash)/

(Continuous) (Self-timer)/

(Macro)/ (Infinity)/

Zoom Button (p. 31)

Shooting: (Wide Angle)/ (Telephoto) (p. 31)

Playback: (Index)/ (Magnify) (p. 55)

(Print/Share) Button

The following operations are accessible through one easy press of the button.

- Printing: See the Direct Print User Guide (separate from this guide).

- Downloading images (Windows only): See page 95 of this guide and the Software Starter Guide

(separate from this guide).

The indicator blinks or lights during a printer or computer connection.

Blue: Ready to Print/Ready to transfer images

Blinking Blue: Printing/Transferring

The indicators light or blink when you open the lens cover or whenever you press the shutter button.

Upper Indicator

Green: Ready to shoot or ready to communicate with your computer.

Blinking Green: Starting-up, recording to the SD card, reading the SD card, erasing data on the SD card, or transmitting data to your computer.

Orange: Ready to shoot (using the flash).

Blinking Orange: Ready to shoot (camera shake warning) or charging the flash (with LCD monitor On).

Lower Indicator

Yellow: Macro mode or Infinity mode

Blinking Yellow: Focusing difficulty (although you can press the shutter button, try using focus lock (p. 73))

14

Preparing the Camera

Installing the Battery and SD Card

Write Protect Tab

The SD card has a write protect tab. Sliding the tab downward prevents recording of data and protects existing data (e.g. images). When recording to, erasing from or formatting the SD card, slide the tab upward.

Insert two (2) AA-size alkaline batteries

(included with the camera) or two (2) AA-size

NiMH batteries (sold separately) and insert the SD card.

1

Check that the camera power is off.

2

Press the battery cover lock towards the arrow to open the cover.

c

Write Protect

Tab

Writing/Erasing possible Writing/Erasing impossible d

3

Insert the batteries as shown.

(-) Negative end

(+) Positive end

15

Preparing the Camera

4

Insert the SD card as shown and close the SD card slot/battery cover.

z Insert the SD card as shown on the inside of the battery cover until you hear it click into place.

z Do not touch or allow metal objects to contact the terminals on the back of the SD card.

Back d c

Terminals

To remove the SD card

Push in the SD card until you hear it click, then release it.

z Since the camera is writing, reading, erasing or transmitting data to or from the

SD card when the indicator blinks green, never perform the following actions during this time. It could corrupt the image data.

• Subject the camera body to vibration or shocks.

• Turn the camera’s power off or open the SD card slot/battery cover.

z Please note that SD cards formatted with other manufacturers’ cameras or a computer, or formatted or edited with application programs, may slow down writing to the SD card or may not operate correctly in the camera.

z You are recommended to use SD cards that have been formatted in your camera

(p. 19). The card supplied with the camera may be used without further formatting.

z We recommend that you use the separately sold AC Adapter Kit ACK800 to power the camera during long usage sessions (p. 124).

z The separately sold battery charger kit lets you use rechargeable NiMH batteries to power the camera (p. 121).

16

z See Battery Performance (p. 129).

z For information about the Battery and

Charger Kit and AA-size rechargeable

NiMH batteries, see the System Map

(separate from this guide).

z See SD Cards and Estimated Capacities

(Recordable Images) (p. 129).

Proper Battery Handling z Use AA-size alkaline or Canon AA-size NiMH batteries (sold separately) only. For information on handling the AA-size rechargeable NiMH batteries, see Using the Power Kits (Sold

Separately) (p. 121).

z Since the performance of alkaline batteries may differ according to brand, the operating time of the batteries you purchase may not be as long as the batteries that came with the camera.

z Camera operating time may shorten at low temperatures when alkaline batteries are used.

Also due to their specifications, alkaline batteries may expire faster than NiMH batteries. If you are using the camera in cold areas or for a long time, we recommend using Canon AA-size NiMH

Battery Kit NB4-200 (a four-battery Kit).

Preparing the Camera z While it is possible to use AA-size nickelcadmium batteries, performance is unreliable and their use is not recommended.

z Never mix unused and partially used batteries. Always load two fresh (or fully recharged) batteries at the same time. The partially used batteries may leak.

z Be careful to load the batteries with their positive

(+) and negative (-) ends in the right direction.

z Never mix batteries of different types or from different manufacturers. Both batteries should be identical.

z Before inserting the batteries, wipe the battery terminals well with a dry cloth. Oil from one's skin or other dirt may cause a considerable reduction in the number of recordable images or reduced usage time.

z Battery performance deteriorates at low temperatures (especially with alkaline batteries).

If you are using the camera in cold areas and batteries are running down faster than they should, you may be able to restore performance by placing batteries in an inner pocket to warm them up prior to use. But be careful that you don't put the batteries into a pocket together with a metal key chain or other metallic objects, as these objects may cause batteries to short-circuit.

17

Preparing the Camera z If you do not plan to use the camera for a long time, remove the batteries from the camera and store them in a safe place. Batteries may leak and damage the camera if left installed during prolonged periods of non-use.

WARNINGS

Never use damaged batteries or batteries whose outer seal is completely or partially missing or peeled off, as there is risk that such batteries may leak, overheat, or burst.

Always check the seals on store-bought batteries before loading them, as some batteries may come with defective seals. Do not use batteries with defective seals.

Never use batteries that look like this.

Batteries with all or part of the seal (electrical insulation sheath) peeled off.

The positive electrode (plus terminal) is flat.

The negative terminal is correctly formed (protruding from the metal base), but the seal does not extend up over the edge of the metal base.

18

Battery Status Indications

The LCD monitor displays an icon or message to let you know when batteries are low or depleted.

Change the batteries

Batteries are beginning to run low.

Replace (or recharge) batteries promptly. If the LCD monitor is off, this icon will appear when you press any of the following buttons: the omni selector, DISP. button and

FUNC. button.

Batteries are fully depleted and the camera can no longer operate.

Replace the batteries immediately.

Preparing the Camera

Formatting an SD Card

You should always format an SD card when you wish to use a new one, or when you wish to delete not only the images in the SD card but also other data.

Formatting an SD card will permanently erase all data already on it, including all of its protected images. Check the contents before formatting cards that were previously used.

1

Turn the power on (p. 23).

2

Press the MENU button and select

[ (Set up)] using

.

3

Select using or and press the SET button.

4

Select [OK] using

or and press the SET button.

z To cancel formatting instead, select [Cancel] and press the SET button.

z The capacity of the SD card displayed after formatting will be less than the rated capacity of the SD card. This is not a malfunction of the SD card or camera.

5

Press the MENU button.

19

Preparing the Camera z If the camera is not operating correctly, the

SD card may be corrupted. Formatting the card may solve the problem.

z If you are using an SD card from another manufacturer and the card is not functioning correctly, you may be able to correct the problem by formatting the card.

z SD cards formatted with another camera, a computer or peripheral device may not operate correctly. Format these cards with this camera. If formatting in the camera doesn't work properly, turn the camera off and re-insert the SD card. Then turn the camera back on and format again.

Handling Precautions for SD Cards

z SD cards are high-precision electronic devices. Do not bend them, apply force to them, or subject them to shocks or vibration.

z Do not attempt to disassemble or alter the SD card.

z Do not allow dirt, water or foreign objects to contact the terminals on the back of the card. Do not touch the terminals with your hands or metal objects.

z Do not peel away the original label on the SD card or cover it with another label or sticker.

z When writing on the SD card, use a soft point pen (e.g. felt-tip pen). Using a sharp point pen (e.g. ball-point pen) or pencil may damage the SD card or corrupt the recorded data.

z Since some or all of the data recorded on the SD card may be corrupted or erased by electrical noise, static electricity or card malfunction, making a backup copy of important data is recommended.

z Moving an SD card rapidly between temperature extremes will cause condensation to form in the card and lead to a malfunction. To avoid condensation, place the SD card in a sealed plastic bag before moving it into a different temperature zone and allow it to adjust slowly to the new temperature.

z If condensation forms on the SD card, store it at room temperature until the water droplets have evaporated naturally.

z Do not use or store SD cards in the following locations.

• Locations subject to dust or sand

• Locations subject to high humidity and high temperatures

Precaution for Multi Media Cards

This camera is designed to perform optimally when used with genuine Canon-brand SD cards. You may use multi media cards (MMC) with this camera.

However, Canon makes no warranties concerning the use of multi media cards (MMC).

20

Setting the Date/Time

The Date/Time menu will be displayed when camera power is turned on for the first time or with low date battery power. Perform operations from Step 4 (Replace the date battery when power from the current one is exhausted (p. 120)).

1

Turn the power on (p. 23).

2

Press the MENU button and select the [ (Set up)] menu using .

3

Select

Time) using or

and then press the SET button.

Preparing the Camera

4

Set the date and time.

z Use or to change the value of the highlighted field.

z Press or to set the date and time.

z The date can be set up to the year 2030.

z The factory default for the date format may differ from that shown here in some regions.

5

Press the SET button.

6

Press the MENU button.

z For embedding the date on the image data, refer to page 52.

z Setting the date and time settings does not cause the date/time stamp to appear on images. For printing images with the date on them, refer to page 92, the

Direct Print User Guide or Software

Starter Guide.

z For important information, see

Replacing the Date Battery (p. 120).

21

Preparing the Camera

Setting the Language

Sets the display language for LCD monitor menus and messages.

1

Turn on the camera (p. 23).

2

Press the MENU button and select the [ (Set up)] menu using .

3

Select using or and press the SET button.

4

Select a language and press the SET button.

z The setting menu will reappear without changing the language setting if you press the MENU button instead of the SET button.

5

Press the MENU button.

Shortcut Operation

The Language menu can also be displayed in Playback mode by holding down the

SET button and pressing the MENU button. (This function cannot be used while a movie clip is played back, or when a separately sold printer is connected to the camera.)

22

Basic Functions

Turning the Power On/Off

Turning the Power On

1

Press the ON/OFF button until the upper indicator next to the viewfinder lights green.

Shooting Mode z Current shooting settings will appear in the

LCD monitor.

z Current shooting settings will disappear in about 6 seconds when the LCD monitor is set to Standard (No information) or No Display(p. 26).

z If you turn the mode switch to , the lens will retract after approximately 1 minute.

Playback Mode z The LCD monitor displays an image.

Turning the Power Off z Press the ON/OFF button again to turn the power off.

z If the "Card locked!" message appears right after the power is turned on, the SD card cannot record (p. 15).

z You will hear a start-up sound and see the start-up image when the power comes on.

(To change the start-up sound and image, see below and p. 71 and 106.) z The start-up image does not appear when the LCD monitor is off in Shooting mode or the A/V OUT terminal is connected to a TV.

Turning on the camera without the start-up sound and image

Press and hold the SET button, then turn on the power.

23

Basic Functions

Power Saving Function

This camera is equipped with a power saving function. Depending on the power saving setting

(p. 69), the camera may power down or the LCD monitor may go off automatically. zAuto Power Down

[On]

Shooting mode:

Powers down approximately 3 minutes after the last time a camera control is accessed.

Playback mode:

Powers down approximately 5 minutes after the last time a control is accessed on the camera.

Printer Connection mode:

Powers down approximately 5 minutes after the last time a control is accessed on the camera or something is printed on the printer.

When the Auto Power Down Function Activates

Press the ON/OFF button again.

[Off]

The power saving function does not activate.

zDisplay Off

The LCD monitor automatically shuts off approximately 1 minute* after the last time a camera control is accessed.

* This time can be changed (p. 69).

When the Display Off Function Activates

The LCD monitor display turns back on if any button other than the ON/OFF button is pressed.

The power saving function is disabled during Auto Play or during a computer connection (p. 85, 95).

24

Mode Switch

Use the mode switch to select the camera's operating mode.

Shooting Mode

(Still Image)

Shoots still images. Shooting mode is selectable from Auto (p. 31), Manual, or Stitch Assist (p. 46).

(Special Scene Mode)

Shoots the image with the most appropriate settings for the scene.

(Movie)

Shoots movie clips (p. 53).

Basic Functions

Replay Mode

Replay Mode z Replay or delete images from the SD card (p. 55,

61).

z Download and display images on a connected computer (p. 95).

z Print images directly to a connected printer (p.

88).

When a printer (sold separately) is properly

LCD monitor.

25

Basic Functions

Using the LCD Monitor

Use the LCD monitor to shoot and review images, for menu operations and playing back images.

Pressing the DISP. button cycles the LCD monitor to the next mode.

Shooting Mode

Button

Standard

(No Information)

Detailed

(Information View)

AF Frame

Spot AE

Point Frame

Button

No Display

Button

• Still images:Shots Remaining

• Movies (seconds):

- Remaining Movie Time

- Elapsed Time

The AF frame changes according to its On/Off setting. (LCD monitor On)

AiAF set to [On] (p. 74) z Green: Focusing complete (focused AF frame) z Does not appear: Focusing difficulty

AiAF set to [Off] (p. 74) z Green: Focusing complete z Yellow: Focusing difficulty

26

Basic Functions

Shooting Mode

Exposure Compensation

White Balance

Drive Mode

ISO Speed

Photo Effect

Light Metering Mode

Compression

Resolution

Postcard Print

(Red)

2.8x 3.5x 4.4x 5.4x 7.0x

Flash

Red-eye Reduction

Macro/Infinity Mode

Quick Shots

Auto Rotate Function

Movie Recording Mode

Digital Zoom Setting*

1

Camera Shake Warning

Low Battery p. 35, 48 p. 76 p. 77 p. 43, 45 p. 79 p. 80 p. 75 p. 37 p. 37 p. 51 p. 39 p. 39, 41 p. 42 p. 38 p. 83 p. 53 p. 44 p. 27 p. 18

*1 : Zoom powers reflect the combined optical and digital zoom effects. These figures appear when the digital zoom is activated.

zWhen a Shooting mode setting is changed, the settings appear on the LCD monitor for about 6 seconds even if the LCD monitor is set to No information or off. (The Shooting mode settings may not appear depending on the camera setting.)

You can set the flash, red-eye reduction, macro/ infinity mode, self-timer, continuos shooting, and the light metering mode settings while this information appears on the LCD monitor.

z and the icons in (the shaded area of the chart) appear even when the information view is turned off.

zIn addition to the above, the AF frame, spot metering frame, recordable images or recordable movie time are displayed as in the example to the left.

zSetting to the , or modes turns the LCD monitor on regardless of whether it is set to on or off.

zA slow shutter speed has likely been selected because of insufficient lighting if the upper indicator beside the viewfinder blinks orange after the metering preparations are complete and the camera shake icon ( ) displays in the LCD monitor. Set the flash to or , or affix the camera to a tripod to shoot.

zAfter you take a photo by fully pressing the shutter button, the image displays on the LCD monitor for approximately three seconds (or the review duration you set from 3 to 10 seconds). If you press the button while the image is displayed, it will continue to display (p. 34).

27

Basic Functions

Playback Mode

Standard

Button

No Display

Shooting

Date/Time

Image Number and Total

(Display Image/Total)

File Number

Button

Detailed*

Histogram

Compression p. 37

Resolution (Still image) p. 37

Sound memo (WAVE file) p. 84

Movie

Protection status p. 53 p. 86

Button

Movie Length

* Detailed Display is not available in index playback (9 images).

28

Shooting Mode p. 35, 48

Exposure Compensation

White Balance

ISO Speed

Photo Effect

Resolution (Movie)

Flash

Light Metering Mode

Macro/Infinity

In addition to the above, the histogram and recorded movie time are displayed.

p. 76 p. 77 p. 79 p. 80 p. 37 p. 39 p. 75 p. 42

The following information may be displayed, depending on the image.

An audio file other than a wave file, or a file with unrecognized format is attached.

A JPEG file not supported by "Design Rule for

Camera File System" standards.

RAW file format

Unrecognizable file formats

Basic Functions

The image in the LCD monitor may darken when the monitor is used under sunlight or other strong lighting. This is not a defect.

z The on/off setting of the LCD monitor display mode is memorized when the camera is turned off. When the camera is turned on again it assumes the last mode. However, when the LCD monitor is turned on and the "Change the batteries" message appears, the LCD monitor may not automatically turn on the next time the camera is started.

z While a recorded image is displayed on the LCD monitor, you can check the exposure with the graph (See About the

Histogram). It shows the distribution of the brightness data. If the exposure requires adjustment, set the exposure compensation and re-shoot (Press the

button if the histogram and other information is not shown.).

z Please note that image information recorded by this camera may not display correctly on other cameras and image information recorded by other cameras may not display correctly on this camera.

29

Basic Functions

About the Histogram

The histogram is a graph that allows you to judge the brightness of the shot image.

The greater the bias toward the left in the graph, the darker the image. The greater the bias toward to the right, the brighter the image. If the image is too dark, adjust the exposure compensation to a positive value. Similarly, adjust the exposure compensation to a negative value if the image is too bright (p. 76).

Sample Histograms

Dark image Balanced image Bright image

30

Shooting – The Basics

See Functions Available in Each Shooting Mode

(p. 138) at the end of this manual to find out which settings can be changed in which shooting modes.

Auto Mode

Shooting Mode

In this mode, all you have to do is press the shutter button and let the camera do everything else.

1

Set the mode switch to .

2

Select menu.

z See Selecting Menus and Settings (p. 62).

* The current setting is displayed.

3

Aim the camera at the subject you wish to shoot.

4

Use the zoom button to achieve the desired composition (relative subject size in the viewfinder).

: Magnifies the size of subject (Telephoto)

: Decreases the size of the subject (Wide angle) z The angle of view can be adjusted within the

45 to 100 mm range, in 35mm film equivalent.

z When the LCD monitor is on, the combined use of the digital zoom and optical zoom enables magnified shooting up to approx. 7x

(See Digital Zoom, p. 44).

5

Press the shutter button halfway.

z The shutter button has a two-stage action.

Pressing Halfway

Pressing halfway automatically sets the exposure and focus.

31

Shooting – The Basics

• Two beeps will sound when the camera has finished metering, and the indicator will light green or orange. If the LCD monitor is on, the AF frame will appear green.

• The indicator will blink yellow and the beep will sound one time if the subject is difficult to focus.

6

Press the shutter button all the way.

Pressing Fully

Pressing fully releases the shutter.

• You will hear the shutter sound when the shot is complete. Do not move the camera until you hear this sound.

• The indicator next to the viewfinder blinks green while data is recorded onto the SD card.

• The picture appears for three seconds on the LCD monitor, if it is on.

32 z Functions Available in Each Shooting

Mode (p. 138).

z With the Review function, you can change the length of time images show on the LCD monitor after shooting, or set it so they do not show at all (p. 35).

z If the orange or yellow indicator blinks while you press halfway, you can still press fully to take the shot.

z Images are first saved into the camera's internal memory before being recorded onto the SD card, allowing the next images to be taken immediately as long as sufficient space is available in the internal memory.

z The beep and shutter sound can be set

On/Off in the Set up menu (p. 67).

z Even when the shutter sound is set to

[ , , (On)] (p. 71), no sound will be heard if [Mute] is set to [On]. z There is no shutter sound in movie mode.

z Shots cannot be taken while the flash is charging.

Shooting with Viewfinder

You can save power by turning the LCD monitor off and using the viewfinder to shoot.

1

Compose the image so that the subject appears in the center of the viewfinder.

Shows approximate center of the image

Viewfinder

Shooting – The Basics

About the AF Function

This camera employs AiAF (artificial intelligence autofocus) technology, which uses a broad metering field to calculate the focal distance with high precision. It delivers a crisp focus even when the photographic subject is slightly off-center.

The camera can also automatically focus on the center when AiAF is set to [Off].

Image Seen in Viewfinder vs. Recorded

Image

When shooting an image, a larger range than the one visible in the viewfinder usually gets recorded. You can confirm the actual range that will be recorded in the LCD monitor. In addition, due to the viewfinder’s specification, the range visible in the viewfinder may actually differ from the actual recorded image. The closer the subject is to the lens, the more noticeable the difference will be. In some cases, portions of images shot up close that appear in the viewfinder will not appear in the recorded image. You are recommended to use the LCD monitor during macro photography (p. 42).

33

Shooting – The Basics

AF-assist Beam

- The AF-assist beam will sometimes emit when the shutter button is pressed halfway to assist focusing in certain conditions, i.e. dark conditions.

- The AF-assist beam can be turned off

(p. 65).

If animals are your subject, turn off the beam when shooting in the dark to avoid startling them. However, please keep in mind the following facts.

• If the AF-assist beam is turned off, it may become more difficult for the camera to focus in dark conditions.

• The red-eye reduction lamp may emit when you press the shutter button halfway even if the AF-assist beam is turned off.

In order to prevent any lamp from emitting before the flash fires, set both the red-eye reduction function and the

AF-assist beam to [Off] in the Shooting menu.

Reviewing an Image Right After

Shooting

Shooting Mode

After a photo is taken, the image displays on the LCD monitor for 3 seconds. In addition, the image will keep on displaying regardless of the review duration setting if one of the following operations is performed.

z Keeping the shutter button fully pressed z Pressing the button while the image is displayed*

Press the shutter button halfway again to stop displaying it.

You can perform the following while images are displayed.*

• Erasing Images Individually (p. 61)

• Display the setting details of the image

(p. 26).

• Magnifying Images (p. 55)

* This cannot be performed in Stitch Assist mode.

34

Changing the Image Display Duration

The length of time images are displayed after a photo has been taken can be changed from between 3 seconds to 10 seconds or turned off.

1

Press the MENU button.

z The [ (Rec.)] menu appears.

2

Select (Review) using or .

3

Select a Review setting using or

and press the

MENU button.

z With the [Off] option, the image will not display.

z With the [3 sec.] to [10 sec.] options, the image will appear for the time selected even if you release the shutter button.

z You can continue to display the image as long as the shutter button is fully held pressed regardless of the Review setting.

z Another picture can be taken even while the last is displayed.

Shooting – The Basics

Selecting a Shooting Mode

The following modes are available with this camera.

Auto

Manual

The camera automatically makes most of the settings for you.

You can manually adjust the exposure, white balance, and other settings before shooting.

For shooting panorama composition images

Stitch

Assist

Special

Scene

Select from 8 scene modes to shoot with the most appropriate settings for the scene.

Portrait Beach

Night Scene Fireworks

Foliage

Snow

Underwater

Indoor

Movie For shooting movies

The settings selected for each mode are kept even if the shooting mode is changed. When the power is turned off, the settings are also retained for certain shooting modes, but not for others (p. 138).

35

Shooting – The Basics

1

Set the mode switch to and press the button.

2

Select the shooting mode using or

, and press the button.

Selecting SCN

1

Set the mode switch to SCN and press the button.

2

Select the shooting mode using or

, and press the button.

Selecting

1

Set the mode switch to .

z This will switch to movie mode.

36

Shooting – The Basics

Changing the Resolution and

Compression

Shooting Mode

The Postcard Print mode is not available in , and .

You can change the resolution and compression

(excluding movie) depending on the purpose.

L

(Large)

M1

Resolution

(Medium1)

M2

(Medium2)

S

(Small)

2048 x

1536 pixels

1600 x

1200 pixels

1024 x 768 pixels

640 x 480 pixels

Large

Small

Purpose z Print up to A4 size*

210 x 297 mm (8.3 x

11.7 in.) prints z Print up to Letter size*

216 x 279 mm (8.5 x

11 in.) prints z Print postcard size

148 x 100 mm (6 x 4 in.) prints z Print L-size 119 x 89 mm (4.7 x 3.5 in.) prints z Print card size 86 x 54 mm (3.4 x 2.1 in.) prints z Send images as email attachments z Shoot more images

* Paper sizes vary according to region.

or z The resolution is set to M1 (1600 x

1200) and the compression is set to

(Fine).

z See page 51 for Postcard Print mode information.

Compression

Superfine

Fine

Normal

High

Quality

Normal

Purpose

Shoot higher quality images

Shoot normal quality images

Shoot more images

Movies can be shot with the following resolutions.

Resolution

640 x 480 pixels

320 x 240 pixels

160 x 120 pixels

37

Shooting – The Basics

1

Press the FUNC. button.

2

Select *

*

The current setting is displayed.

Example (excluding ):

Compression

3

Select the compression or resolution you wish to set using

or .

Example (excluding ):

Compression

Number of shots remaining* (Only displayed when the resolution or compression is selected.)

* In the case of a movie clip, the remaining shooting time (in seconds) appears.

4

Press the FUNC. button.

z Image File Sizes (Estimated) (p. 130) z Types of SD cards and resolution (p. 129)

Quick Shots

Shooting Mode

You can reduce shutter lag time to capture those fleeting "photo opportunities".

z You cannot select the quick shot method for use with the viewfinder (LCD monitor must be on).

z The LCD monitor display freezes while the camera is autofocusing.

1

Press the DISP. button to turn the

LCD monitor on.

2

In the (Rec.) menu, select .

z See Selecting Menus and Settings (p. 62).

38

3

Use or to select [On] and press the MENU button.

z The display will return to the Shooting screen.

z The icon will display on the LCD monitor

(detailed display on) when the "Quick Shot" option is set to On.

Shooting – The Basics

Using the Flash

Shooting Mode

* In (Fireworks) mode, the flash is prohibited.

Use the flash according to the guidelines below.

Auto with red-eye reduction

The flash fires automatically as required by the lighting level, and the red-eye reduction lamp fires each time the main flash fires.

Auto

The flash fires automatically as required by the lighting level.

Flash on with red-eye reduction

The red-eye reduction lamp and the flash always fire.

Flash on The flash always fires.

Flash off The flash does not fire.

1

Press the button to switch between flash modes.

z The selected flash mode appears on the LCD monitor.

39

Shooting – The Basics z You can switch between settings by pressing

When the red-eye reduction function is on

When the red-eye reduction function is off z This operation may not work in certain

Shooting modes (p. 138).

2

Shoot the image.

z The flash will fire if the indicator beside the viewfinder lights orange when the shutter button is pressed halfway. (Does not fire in .) z Shooting procedures are the same as for the

Auto Mode (p. 31).

z If the flash is used in macro mode, the light may not be controlled correctly. In this case, set a higher ISO sensitivity or use other light sources instead of using the flash.

40 z When shooting with a high ISO sensitivity and using the flash, there is more of a chance of overexposure the closer you are to the subject.

z Please note that a slow shutter speed will be selected in dark places or when the flash is set to off. Be careful to avoid camera shake under these conditions.

Shooting in Mode

Be careful to hold the camera still to avoid camera shake.

Shooting in , , , or Mode

Fix the camera to a tripod since the shutter speed will be slower than in the

mode. If an image is dark in mode, reshooting in mode will make it brighter.

z The flash may take approximately 10 seconds to charge. The LCD monitor, if it is on, will go off after the indicator blinks orange while recharging. The

LCD monitor will come back on after the indicator lights a steady orange when recharging is completed. Recharging time may vary according to shooting conditions and battery charge levels.

z The flash fires twice. A pre-flash will fire and will be followed by the main flash.

The pre-flash is used by the camera to obtain the subject’s exposure data so that the main flash can be set to the optimal intensity for the shot.

Setting the Red-eye Reduction

Function

The red-eye reduction lamp fires when the flash is used in dark areas. This reduces light reflecting back from the eyes and making them appear red.

1

In the [ (Rec.)] menu, set (Redeye) to [On].

z See Selecting Menus and Settings (p. 62).

z appears on the LCD monitor.

Shooting – The Basics z The red-eye reduction function cannot be set when the Special Scene mode

(p. 48) is set to (Fireworks).

Red-eye Reduction z For this mode to be effective, the subject must be looking right at the red-eye reduction lamp. Try asking them to look directly at the lamp.

Even better results can be obtained by increasing the lighting in indoor settings or coming closer to the subject.

41

Shooting – The Basics

Macro/ Infinity Modes

Shooting Mode

Macro

Infinity

Use this mode when the distance from the lens tip to the subject is in the range of 5 to 47 cm (2.0 in. to 1.5 ft.) at wide angle end and 30 to 47 cm (1.0 to 1.5 ft.) at telephoto end.

Use this mode to shoot landscapes. Also use this mode for compositions combining both near and distant objects.

1

Press / ( on the omni selector) to display or .

z Pressing / ( on the omni selector) cancels the macro mode.

2

Shoot the image.

z Shooting procedures are the same as for the

Auto Mode (p. 31).

z The indicator beside the viewfinder will light yellow when the shutter button is pressed halfway.

42

If the flash is used in macro mode, the light may not be controlled correctly. In this case, set a higher ISO sensitivity or use other lightings instead of using the flash.

z Always use the LCD monitor to compose images in macro mode. Shooting with the viewfinder is possible, however, part of the image may not appear in the final shot (p. 33).

z When the lens is zoomed out to the wide angle end, the recordable area is approx. 47 × 35 mm (1.9 × 1.4 in.)

*1

, and at telephoto end, it is 115 × 87 mm (4.5 ×

3.4 in.).

*2

When the zoom position is located between the telephoto end and the wide angle end, the distance between the front of the lens and the subject will be the same as the telephoto end.

z The exposure may not be optimal when the flash is used in macro mode.

*1

Closest focal distance.

*2

Maximum optical telephoto setting.

Self-timer

Shooting Mode

With this function, images are shot 10 or 2 seconds after the shutter button is pressed. This is useful when you want to take a memorable photo with everyone including yourself in the picture. The selftimer can be used in any shooting mode.

1

Press / ( on the omni selector) as necessary so that or

appears on the LCD monitor.

z When is selected and the shutter button is pressed fully, the self-timer lamp starts blinking and the self-timer begins to beep.

The blinking gets faster 2 seconds before the shutter releases.

z When is selected and the shutter button is pressed fully, the self-timer lamp blinks fast from the beginning. The shutter releases in 2 seconds.

2

Shoot the image.

z Shooting procedures are the same as for the

Auto Mode (p. 31).

Shooting – The Basics

To Cancel the Self-timer

Press the / button to display .

Changing the Self-timer Countdown

Time

1

In the [ (Rec.)] menu, select

(Self-timer).

z See Selecting Menus and Settings (p. 62).

2

Use or to select or and press the MENU button.

z The display will return to the Shooting screen.

You can change the self-timer sound by changing the setting in [Selftimer Sound] in the [ (My Camera)] menu (p. 71).

43

Shooting – The Basics

Digital Zoom

Shooting Mode

Images can be zoomed with the combined optical and digital zoom functions as follows.

z 2.8x, 3.5x, 4.4x, 5.4x, and 7.0x

1

Press the DISP. button to turn the

LCD monitor on.

2

In the [ (Rec.)] menu, select

(Digital Zoom).

z See Selecting Menus

and Settings (p. 62).

3

Select [On] using or and press the MENU button.

4

Press the zoom button’s .

z The lens will zoom to the maximum optical telephoto setting and stop. Press again to further zoom the image digitally.

z Press the zoom button’s to zoom back out.

The combined magnifications of the optical zoom and digital zoom are displayed.

5

Shoot the image.

z Shooting procedures are the same as for the

Auto Mode (p. 31).

The digital zoom cannot be used when the

LCD monitor is off.

z Images become coarser the more they are digitally zoomed.

z Since camera shake may become a factor when using the digital zoom, the use of a tripod is recommended.

44

Continuous Shooting

Shooting Mode

Use this mode to shoot successive frames while the shutter button is pressed.

1

Press / ( on the omni selector) as necessary so that

appears on the LCD monitor.

2

Press the shutter button halfway to lock the focus.

3

Press the shutter button all the way to shoot.

z Shooting will stop when the shutter button is released.

z The shooting speed is approximately 1.3 frames per second (Large/Fine, LCD monitor off).

* These figures reflect Canon’s testing standard.

The actual figures will vary according to the shooting conditions and settings.

Shooting – The Basics z If internal memory becomes full, intervals between shots may lengthen slightly.

z If you are using the flash, shots are taken more slowly to allow time for the flash to recharge.

45

Shooting – The Basics

Shooting Panoramic Images

(Stitch Assist)

Shooting Mode

Stitch Assist can be used to shoot overlapping images that can later be merged

(stitched) to create one panoramic image on a computer.

To merge the images on a computer, use

PhotoStitch, one of the supplied programs.

Framing a Subject

The PhotoStitch program detects the overlapping portions of adjoining images and merges them.

When shooting, try to include a distinctive item

(landmark) in the overlapping portions.

There are two stitch assist modes based on the shooting direction as shown in the following.

Left

Right

Right

Left

Shoots horizontally from left to right.

Shoots horizontally from right to left.

46 z Compose each frame so that it overlaps

30 to 50 % of the adjoining image. Try to keep the vertical misalignment to within

10 % of the image height.

z Do not include moving items in the overlap.

z Do not try to stitch images that include both distant and close items. Objects may appear warped or doubled up.

z Make the brightness in each image consistent. The final image will appear unnatural if the difference in brightness is too great.

z Pan (swivel) the camera to take successive shots.

z To shoot close-ups, slide the camera over the subject, keeping it parallel to the subject as you move.

Shooting

1

Set the mode switch to .

2

Select or from the menu.

z See Selecting a Shooting Mode (p. 35).

3

Shoot the first image.

z The exposure and white balance settings are set and locked with the first image.

Shooting – The Basics

4

Compose and shoot the second image so that it overlaps the first.

z Minor discrepancies in the overlap can be corrected with the software.

Sequence z An image can be retaken. Press or to return to that frame.

5

Use the same procedures to shoot the remaining frames.

z A maximum of 26 images can be recorded either horizontally or vertically.

6

Press the SET button after the last shot.

47

Shooting – The Basics z A custom white balance setting (p. 78) cannot be set in / mode. To use a custom white balance setting, first set it in another shooting mode.

z The settings in place for the first image are locked in and cannot be changed for subsequent shots.

z A TV cannot be used as the monitor for shooting in this mode.

See page 138 for settings that can be changed in this mode.

Special Scene Mode

Shooting Mode

By simply selecting one of the following 8 modes, you can shoot the image with the most appropriate settings for the scene.

Portrait

Night Scene

Foliage

Snow

Beach

Use this mode when you want the subject to appear sharp and the background to blur.

Use this mode to capture human subjects against the backdrop of an evening sky or night scene. Not only the subject, but also the backdrop can be captured with accurate exposure.

Appropriate for shooting images with flowers, leaves or trees to enhance color.

Appropriate for shooting the subject against the backdrop of snowy mountains while preventing dark subjects and bluish backgrounds.

Appropriate for shooting scenes by the sea or on sunlit sandy beaches while preventing dark subjects.

48

Fireworks

Underwater

Indoor

Appropriate for shooting fireworks clearly with the optimal exposure.

Appropriate for shooting images with the All Weather Case AW-

DC20 (sold separately). This mode yields image data in the optimal white balance to record images in natural hue by reducing the bluish tone.

Prevents camera shake and maintains the subject's true color when shooting under fluorescent or tungsten lighting. The exposure is regulated so as to avoid the use of flash as much as possible.

Shooting – The Basics

1

Set the mode switch to

(Special Scene mode).

2

Select * from the button.

* The current Scene mode screen is displayed.

3

Select the scene you wish to shoot using or .

z You can shoot the image right after selecting settings by pressing the shutter button. The menu displays again after the shot, allowing you to change the settings easily.

z Shooting procedures are the same as for the

Auto Mode (p. 31) excluding .

z For the shooting procedures of , see the

All Weather Case User Guide included with the All Weather Case AW-DC20 (sold separately).

4

Press the FUNC. button.

5

Shoot the image.

49

Shooting – The Basics

Portrait Night Scene Foliage Snow

Indoor Underwater Fireworks Beach

50 z In and modes, the shutter speed slows down. Use a tripod to avoid camera shake.

z In and modes, the ISO speed may increase and cause noise in the image.

z See page 138 for settings that can be changed in this mode.

z Results may vary depending on the subject.

z When shooting images underwater, always turn the power off before inserting the camera into the All Weather Case AW-DC20 (sold separately).

Postcard Print Mode

Shooting Mode

You can shoot images with settings appropriate for postcard size printing.

z When printing standard image data to postcard size, sometimes the top, bottom and sides may not get printed.

z By shooting images in the Postcard Print mode, you can check the printing area

(vertical/horizontal ratio of 3:2) beforehand. In addition, the resolution locks to M1 (1600 x

1200) and the compression locks to the

(Fine) setting, rendering smaller file sizes.

1

Press the FUNC. button.

2

Select L* using or .

* The current setting is displayed.

3

Select using or .

Shooting – The Basics z You can shoot the image right after selecting settings by pressing the shutter button. The menu displays again after the shot, allowing you to change the settings easily.

4

Press the FUNC. button.

5

Shoot the image.

z When you press the shutter button halfway, the area that will not get printed grays out.

z Shooting procedures are the same as for the Auto Mode (p. 31).

Selecting cancels the [On] setting of the digital zoom.

z Some settings are not available with certain

Shooting modes. Please refer to Functions

Available in Each Shooting Mode (p. 138).

z When [Date Stamp] (p. 52) is set to [Date] or [Date & Time], appears on images in step 2 and 3.

z For printing instructions, refer to the

Direct Print User Guide.

51

Shooting – The Basics

Embedding the Date in the Image

Data

You can embed the date on image data when

is selected. The date will be printed on your images even if it has not been set at the computer or printer.

z Ensure that the camera’s date/time is set beforehand (p. 21).

z You cannot embed the date on image data when is not selected.

1

Check that appears on the

LCD monitor.

2

Select

Stamp) in the [

(Rec.)] menu.

z See Selecting Menus

and Settings (p. 62).

3

Select [Off], [Date] or [Date & Time] using or .

z See Setting the Date/

Time (p. 21).

4

Press the MENU button.

5

Shoot the image.

z Shooting procedures are the same as for the

Auto Mode (p. 31).

z The Date Stamp cannot be deleted from the image data once it has been set.

z When using a CP printer, part of the date may not get printed if the credit card size print (54 mm x 86 mm) is selected.

52

Movie Mode

Shooting Mode

Use this mode to shoot movies. The resolution can be set to [ (640 x 480)], [

(320 x 240)], or [ (160 x 120)] (p. 37).

1

Set the mode switch to .

z The LCD monitor turns on and displays the maximum recording time (in seconds).

2

Press the shutter button all the way.

z Shooting and sound recording starts simultaneously.

z During the shooting a red circle appears in the upper right of the LCD monitor.

3

Press the shutter button all the way to stop recording the movie.

z The maximum length of individual movie

( : 10 frame/second, : 15 frame/ second) is 30 seconds at the setting, 3 minutes at the and setting (according to Canon's standardized tests).

Shooting – The Basics

* Recording time vary by the SD card. See SD

Cards and Estimated Capacities (p. 129).

The maximum length of individual movie may vary with the subject and shooting conditions.

Recording will automatically stop when the maximum is reached or when the SD card runs out of free capacity.

z You are recommended to use an SD card that has been formatted in your camera to shoot movies (p. 19). The card supplied with the camera may be used without further formatting.

z The recording time may not display properly during shooting or filming may stop unexpectedly with the following types of SD cards.

- Slow recording cards

- Cards formatted on a different camera or a computer

- Cards which have had images recorded and erased repeatedly

Although recording time may not display properly during shooting, the movie will

53

Shooting – The Basics be recorded correctly on the SD card.

Recording time will display properly if you format the SD card in this camera

(excluding slow recording SD cards).

z Be careful not to touch the microphone while shooting.

z The AE, AF, white balance and zoom settings are set and locked to the settings of the first frame.

z The upper indicator blinks green after a shot. You cannot shoot again until it stops blinking.

z See page 138 for settings that can be changed in this mode. z Sound is recorded monaurally.

z There is no shutter sound in movie mode.

z QuickTime 3.0 or higher is required to playback movie files (AVI/Motion JPEG) on a computer. (QuickTime (for

Windows) is bundled on the supplied

Digital Camera Solution Disk. On the

Macintosh platform, QuickTime 3.0 or later is generally bundled with the Mac

OS 8.5 or later operating system.)

54

Playback – The Basics

Displaying Images Individually

(Single Image Playback)

You can view the recorded images on the

LCD monitor.

1

Set the mode switch to .

z The last image shot is displayed (Single Image

Playback).

2

Press or to switch the displayed image.

z Use to move to the previous image and to move to the next. Holding or moves more rapidly between images, but the images will not appear as clearly.

You may not be able to play back images that have been shot with another camera or edited on a computer with other software applications.

z Press the DISP. button to show the data for the displayed image (p. 28).

z Press the button to quickly delete the displayed image (p. 61).

Magnifying Images

Images can be magnified up to approximately

10 times during single image playback.

1

Set the mode switch to .

2

Press the button.

z Pressing the button while holding the SET button magnifies the image approx. 2.5 times, approx. 5 times and 10 times in order.

Approximate position z Press , , or to change the display position vertically and horizontally.

z To return to normal-size display, press the

button several times.

Movie frames and index playback images cannot be magnified.

You can magnify an image while it is displayed on the LCD monitor in Shooting mode immediately after the image is shot (p. 34).

55

Playback – The Basics

Viewing Images in Sets of Nine

(Index Playback)

Up to 9 images can be viewed at once in index playback.

1

Set the mode switch to .

2

Press the button.

z 9 images appear at a time (Index Playback).

3

Press , , image.

Pressing in this row displays the previous set of

9 images.

Movie

Selected Image

Pressing in this row displays the next set of 9 images.

4

Press the button.

z Index playback cancels and the display reverts to single image playback.

Press the DISP. button to show the data for the displayed image (p. 28).

56

Jumping between Images

The display can be advanced or set back 9 images when in index playback.

1

Press the button in index playback.

z The jump bar appears.

2

Change the image selection using or .

z The previous or next 9 images are displayed.

z Hold the SET button and press or to jump to the first or last 9 images.

Jump Bar

3

Press the button.

z The jump bar disappears and the camera returns to index playback.

z If you press the button once more, the camera returns to single image playback.

Playback – The Basics

Viewing/Editing Movies

Viewing Movies

You can play back the images shot in mode.

1

Set the mode switch to .

z Movies cannot be viewed in index playback mode.

2

Press or to select a movie and press the SET button.

z A movie displays with the icon on it.

z The movie playback panel appears.

3

Select press the SET button.

z The movie images and sound will play.

z You can adjust the volume using or .

Movie Playback

Panel

Volume

57

Playback – The Basics z When a movie has finished playing, it will display the last frame. If the SET button is pressed in this state, the camera will revert to the movie playback panel. If the SET button is pressed again, the movie will start playing from the first frame.

Pausing and Resuming Play z Press the SET button to pause the movie.

Press it again to resume.

Fast Forwarding/Rewinding z Select one of the following operations using

or and press the SET button.

(Exit):

(First Frame): Display the first frame

(Previous Frame): Return to the previous frame (Rewinds if the SET button is held down)

(Next Frame):

Return to single image playback

(Last Frame):

Proceed to the next frame

(Fast forwards if the SET button is held down)

Display the last frame

You may experience frame dropping and audio breakup when playing back a movie on a computer with insufficient system resources.

z The volume at which movies play back can also be adjusted in the Set up menu

(p. 68).

z If [Mute] (p. 67) is set to [On] in the Set up menu, the volume setting returns to 0 but it can be adjusted using or .

z Please adjust the audio sound level on the TV when viewing movie files on a TV.

Editing Movies

You can delete unwanted portions from the first or second half of the movie clip.

1

Select the movie you wish to edit, and press the SET button.

z See Viewing Movies (p. 57).

58

z z z

2

Select (Edit) using or and press the SET button.

z The movie editing panel and the movie editing bar will appear.

3

Select the editing method using

or .

Movie Editing Panel Movie Editing Bar

(Cut beginning):Deletes frames in the first half of the movie

(Cut end): Deletes frames in the second half of the movie

(Exit): Reverts to the movie playback panel

Playback – The Basics

4

Select the deleting position using or .

5

Select (Play) using or and press the SET button.

z The temporarily edited movie will start playing.

z The movie will stop if you press the SET button while it is playing.

6

Select using or , and press the SET button.

z When is selected, the edited movie is not saved and the camera reverts to the movie playback panel.

59

Playback – The Basics

7

Select [Overwrite] or [New File] using or and press the SET button.

z [Overwrite]: Saves the edited movie under the same file name as the original movie. The original data is deleted.

z [New File]: Saves the edited movie under a new file name. The original data is not deleted.

z When there is not enough space left on the

SD card, only the overwrite function is available. If this happens, appears on the counter of the movie editing bar.

z Protected movies cannot be edited.

z It may take approx. 3 minutes to save an edited movie. In case the battery runs out during that period, the saving process may not be able to be completed. To prevent this, it is recommended to use new AA size alkaline batteries or fully charged AAsize NiMH batteries (sold separately), or the AC Adapter Kit ACK 800 (sold separately) (p. 124).

Movies with an original length of 1 second or more can be edited in 1-frame units.

60

Erasing

Please note that erased images cannot be recovered. Exercise caution before erasing a file.

Erasing Single Images

1

Set the mode switch to .

2

Press or to select the image you want to erase and press the button.

z A confirmation screen appears.

3

Press or to select [Erase] and press the SET button.

z To cancel instead of erasing, select [Cancel] and press the SET button.

Protected images cannot be erased with the erase function (p. 86).

Erasing All Images

1

In the [ (Play)]

Menu, select

(Erase all) and press the SET button.

z A confirmation screen appears.

2

Press or to select [OK] and press the SET button.

z To cancel instead of erasing, select [Cancel] and press the SET button.

z All the images recorded in the SD card will be erased if you select [Erase all].

z Protected images cannot be erased with the erase function (p. 86).

z To erase the images and all other data recorded in the SD card, see Formatting

an SD Card (p. 19).

61

Shooting – Advanced Functions

Selecting Menus and Settings

Selecting Settings with the FUNC. Button (Shooting Mode Only)

1.

2.

FUNC.

3. Select a FUNC. menu option using or .

4. Select the setting contents

Photo Effect ( ) (p. 80)

Compression ( ) (p. 37)

Shooting Mode ( ) (p. 35)

Resolution ( ) (p. 37)

1

Set to shooting mode (p. 35).

2

Press the FUNC. button.

3

Select a FUNC. menu option

4

Select the setting contents

5

Press the FUNC. button.

6

Shoot the image.

62

Resolution (Movie) ( ) (p. 37)

Exposure Compensation (±0)

(p. 76)

White Balance ( ) (p. 77)

Items in ( ) show default settings.

ISO Speed ( ) (p. 79)

5.

FUNC.

6.

Shoot the image.

Shooting – Advanced Functions

Selecting Settings with the MENU Button

Shooting Mode Playback Mode

1

Press the MENU button.

2

Use or to switch between menus.

z You can also switch between menus using the zoom button.

3

Use or to select a menu item.

4

Use or to select the settings you wish to set.

5

Press the MENU button.

6

Shoot the image if in Shooting mode.

Rec. Menu

*

Play Menu Set up Menu My Camera Menu

or or

or

z For items with [...] next to them, push the SET button and carry out the settings from the next displayed menu. Once the settings are complete, press the SET button again and confirm these settings.

z In Shooting mode, you can also close the menu by pressing the shutter button halfway.

* The menu will appear slightly different when in SCN and mode.

63

Shooting – Advanced Functions z Some menu items may not be available for selection according to the shooting mode (p. 138).

z You can apply a desired image and sound to and in the My Camera menu. For details, see the Registering

My Camera Settings (p. 108) or the

Software Starter Guide.

z The default of all the settings changed by the menu and button operations except for Shooting mode, [Date/Time],

[Language] and [Video System] can be restored all at once (p. 72).

64

Shooting – Advanced Functions

Menu Settings and Default Settings

Rec. Menu

Menu Items

Quick Shot

AiAF

Red-eye

Self-timer

AF-assist Beam

Digital Zoom

*Default Setting

Setting Content

Sets the Quick Shot option to on or off.

• On / Off*

Sets the AiAF to on (the camera automatically selects the AF frame when taking a picture) or off (AF frame is set to the center frame).

• On* / Off

Sets whether or not the red-eye reduction lamp fires.

• On* / Off

Sets the duration before the self-timer releases the shutter once the shutter button is pressed.

(10 seconds)*

(2 seconds)

Sets the output of the AF-assist beam according to shooting conditions when using the autofocus.

• On* / Off

Sets whether or not the digital zoom combines with the optical zoom to zoom images.

• On / Off*

Reference

Page

38

74

41

43

34

44

65

Shooting – Advanced Functions

Review

Date Stamp

Sets the duration images display on the LCD monitor after the shutter button is released.

• Off / 3* – 10 sec.

Sets the date format to be embedded in image data when is selected.

• Off* / Date / Date & Time

34

52

66

Shooting – Advanced Functions

Play Menu

Menu Items Setting Content

Protect Protects images from accidental erasure.

Rotate Rotates images 90 or 270 degrees clockwise in the display.

Sound Memo Attaches a sound memo to images.

Erase all Erases all images from an SD card (excluding protected images).

Auto Play

Print Order

Plays images automatically one after the other.

Sets which images and how many copies will be printed on a printer with the direct print function or at a photo lab service.

Transfer Order Sets the images that will be downloaded to a computer.

Reference

Page

86

83

84

61

85

90

94

Set up Menu

Menu Items

Mute

Setting Content

*Default Setting

Reference

Page

Set [On] to mute the start-up sound, operation sound, self-timer sound and shutter sound all at once. For details, see How the Mute setting in the

[ (Set up)] menu and each sound setting in the [ (My Camera)]

menu are related (p. 71).

• On / Off *

Note that the warning signal beeps even when the Mute setting is [On].

-

67

Shooting – Advanced Functions

Volume

Adjusts the volume of the start-up sound, operation sound, self-timer sound, shutter sound, or playback sound. The volume cannot be adjusted if [Mute] is set to [On].

• (Off) / (1) / (2)* / (3) / (4) / (5)

Start-up Vol.

Adjusts the Start-up Sound volume when the camera powers up.

Operation Vol.

Adjusts the Operation Sound volume when any button except the shutter button is operated.

Self-timer Vol.

Adjusts the volume of the Self-timer Sound heard from 2 seconds prior to the shot until the actual shot.

Shutter Volume

Adjusts the Shutter Sound volume when the shutter button is pressed all the way. There is no shutter sound in Movie mode.

Playback Vol.

Adjusts the sound volume when a sound memo or movie is played.

LCD Brightness

Adjusts the LCD brightness of the LCD monitor.

• -7 to 0* to +7

Use or to adjust the brightness. If you press or , the display returns to the Set up menu. You can check the brightness in the LCD monitor while you are adjusting the setting.

-

23

-

43

31

57, 84

-

68

Shooting – Advanced Functions

Power Saving

Date/Time

Format

File No. Reset

Auto Rotate

The Auto Power Down and Display Off settings can be set by pressing the SET button.

Auto Power Down

Sets whether or not the camera automatically powers down after a specified period of time elapses without camera operation.

• On* / Off

Display Off

Specifies a period of time before the LCD monitor turns off when no camera operation is performed.

• 10 sec.

• 20 sec.

• 30 sec.

• 1 min.*

• 2 min.

• 3 min.

Sets the date, time and date format.

Formats (initializes) a SD card.

Sets how file numbers are assigned to images.

• On / Off*

Sets whether or not images shot with the camera held vertically are automatically rotated in the display.

• On* / Off

-

24

24

21

19

105

83

69

Shooting – Advanced Functions

Language

Video System

Sets the language used in the menus and messages on the LCD monitor.

• English*(English) • Norsk (Norwegian)

• Deutsch(German) • Svenska (Swedish)

• Français (French) • Español (Spanish)

• Nederlands (Dutch)• (Chinese)

• Dansk (Danish)

• Suomi (Finnish)

• Italiano (Italian)

(Russian)

• Português (Portuguese)

(Japanese)

You can change the language during image playback by holding the SET button and pressing the MENU button.

Sets the video output signal standard.

• NTSC

• PAL

* Default setting

22

103

70

Shooting – Advanced Functions

Customizing the Camera (My Camera Settings)

You can select the theme, start-up image and sound, operation sound, self-timer sound and shutter sound used on this camera. These are called My Camera settings. You can also customize the and options for each item with images from the SD card and newly recorded sounds or by using the supplied software. See the Software Starter Guide for details.

Item/Menu Screen Setting Content

Reference

Page

Theme

Start-up Image

Start-up Sound

Operation Sound

Selects a common theme for the start-up image, start-up sound, operation sound, self-timer sound, and shutter sound.* 2

Sets the start-up image when you turn on the camera.

Sets the start-up sound when you turn on the camera.* 2

Sets the sound when any button other than the shutter button is operated.* 2

106

106

106

106

Selftimer Sound

Shutter Sound

Sets the sound informing you that the photo will be taken in 2 seconds.* 2

Sets the shutter sound when you depress the shutter button. There is no shutter sound in Movie mode.* 2

106

106

My camera menu settings content

(Off) / * 1 / / 106

* 1 Default Setting.

* 2

How the [Mute] setting in the [ (Set up)] menu and each sound setting in the [ (My Camera)] menu are related

To turn off the start-up sound, the shutter sound, operation sound, and self-timer sound all at once, set [Mute] in the

[ (Set up)] menu to [On]. This setting overrides each setting for those sounds. Note that the error warning signal beeps even when the [Mute] setting is [On].

71

Shooting – Advanced Functions

Resetting the Settings to Default

You can reset all of the menu and button operation settings to default.

1

Turn on the camera.

z Can be performed from Shooting or Playback mode.

2

Press the MENU button for longer than 5 seconds.

z The message "Reset settings to default?" appears on the LCD monitor.

3

Press or to select [OK], and press the SET button.

z The screen on the right appears while resetting.

The normal screen resumes when resetting is complete.

z To cancel resetting, select [Cancel] instead of

[OK].

72 z The following settings do not reset to default.

• Shooting mode, Date/Time, Language and Video System in the [ (Set up)] menu (p. 25, 67)

• The custom white balance (p. 78)

• Newly registered My Camera settings

(p. 106) z When the camera is connected to a computer or a printer, this operation does not work.

Shooting Problem Subjects for the Autofocus

Shooting Mode

The following types of subjects may not be suited to autofocus photography. Use the focus lock in these situations.

z Subjects with extremely low contrast to the surroundings z Subjects mixing close and far objects z Subjects with extremely bright objects at the center of the composition z Subjects that are moving quickly z When shooting through glass, get as close as possible to avoid reflection off the glass.

z Subjects with horizontal stripes

1

Aim the camera so that a subject at the same focal distance as the main subject is centered in the viewfinder or in the AF frame displayed on the LCD monitor.

Shooting – Advanced Functions

2

Press and hold the shutter button halfway, and wait until the camera beeps twice.

3

Re-aim the camera direction to compose the shot as desired and press the shutter button all the way.

When using focus lock, the focus will lock on the subject in the center AF frame if you set to [Off] in the [ (Rec.)] menu.

73

Shooting – Advanced Functions

Switching between Focus Settings

Shooting Mode

You can change the autofocus frame (AF frame) selection method. The AF frame will appear when the LCD monitor is turned on

(p. 26).

On

(Auto

Selection)

The camera automatically selects between 9 AF frames to focus on according to the shooting conditions.

Off

(Center

Selection)

The focus is selected using the middle AF frame. This is convenient for making sure the focus is exactly where you want it.

indicates the AF frame which appears on the monitor.

1

In the [ (Rec.)] menu, select

(AiAF).

z See Selecting Menus and Settings (p. 62).

2

Press select [On] or

[Off].

3

Press the MENU button.

z Press the shutter button instead of the MENU button to shoot an image with the set AF frame.

The center AF frame mode is used when the digital zoom is activated.

74

Switching between Light Metering Modes

Shooting Mode

Evaluative metering is the default light metering mode. This can be switched to another metering mode.

Evaluative

Metering

Center-

Weighted

Averaging

Appropriate for standard shooting conditions, including backlit scenes. The camera divides images into several zones for light metering. It evaluates the complex lighting conditions, such as the position of the subject, the brightness, the direct light, and the backlighting, and adjusts the settings to the correct exposure for the main subject.

Averages the light metered from the entire frame, but gives greater weight to the subject matter at the center.

Shooting – Advanced Functions

Spot AE

Point

Meters the area within the spot AE point at the center of the LCD monitor. Use this mode when the subject is backlit or surrounded by strong light.

1

Press ( on the omni selector) as necessary to display either ,

or , and shoot image.

75

Shooting – Advanced Functions

Adjusting the Exposure

Shooting Mode

Adjust the exposure compensation setting to avoid making the subject too dark when it is backlit or shot against a bright background.

1

Select * the FUNC. menu.

z See Selecting Menus

and Settings (p. 62).

* The current setting is displayed.

2

Press or to adjust the compensation.

z The settings can be adjusted in 1/3 stops in the range of -2EV to

+2EV.

z You can check the results of the compensation by viewing the image on the LCD monitor when it is on.

z You can shoot the image right after selecting settings by pressing the shutter button. The menu displays again after the shot, allowing you to change the settings easily.

3

Press the FUNC. button.

z To cancel the exposure compensation, return the setting to 0 using or .

76

Adjusting the Tone (White Balance)

Shooting Mode

When the white balance is set to match the light source, the camera can reproduce colors more accurately.

Combinations of setting contents and light source are as follows.

Auto

Day Light

Cloudy

Tungsten

Fluorescent

Fluorescent H

Custom

Settings are automatically set by the camera

For recording outdoors on a bright day

For recording under overcast, shady or twilight skies

For recording under tungsten and bulb-type 3-wavelength fluorescent

For recording under warm-white, color-white or warm-white (3wavelength) fluorescent lighting

For recording under daylight fluorescent, or daylight fluorescent-type 3-wavelength fluorescent lighting

For setting a custom value with a white sheet of paper, etc., to obtain the optimal white balance for the conditions

Shooting – Advanced Functions

1

Select * (Auto) from the FUNC. menu.

z See Selecting Menus and Settings (p. 62).

* The current setting is displayed.

2

Press select white balance.

z See page 78 regarding the custom setting.

z When the LCD monitor is on, you can check the setting on the display.

z A shot can be taken immediately by pressing the shutter button. The menu will reappear after the shot, allowing you to adjust the setting.

3

Press the FUNC. button.

The white balance cannot be adjusted when the photo effect is set to (sepia) or (B/W) (p. 80).

77

Shooting – Advanced Functions

Setting a Custom White Balance

In the following cases, the white balance may not be correctly adjusted. Use (Custom) to adjust the white balance.

z Shooting at close distances (macro) z Shooting monotone subjects (such as the sky, sea, forest, and so on) z Shooting under special light sources (such as mercury lamps)

1

Select * (Auto) from the FUNC. menu.

z See Selecting Menus and Settings (p. 62).

* The current setting is displayed.

2

Select

3

Aim the camera at a piece of white paper or cloth, or gray card and press the SET button.

z Aim the camera so that the white paper or cloth completely fills the frame at the center of the LCD monitor or the entire optical viewfinder before pressing the SET button.

The camera reads the white balance data when you press the SET button.

z You can shoot right after setting the white balance. The menu displays again after the shot, allowing you to change the settings easily.

4

Press the FUNC. button.

z You are recommended to set the white balance when shooting in the following conditions.

- The shooting mode is set to and the exposure compensation is set to ±0.

The correct white balance may not be obtained when the exposure is incorrect (image is completely black or white).

78

- The zoom is positioned to the telephoto end setting.

Set the digital zoom to [Off].

- A mode other than , is selected.

In , mode, white balance data cannot be read.

- The flash is set to (Flash On) or

(Flash Off).

Use the same flash setting as the one that will be used for shooting when you set the white balance. If the white balance setting conditions and shooting conditions are not the same, the correct white balance may not be obtained. When the flash is set to ,

(Auto with redeye reduction) or

(Auto), the flash may fire while the white balance data is recorded to the custom white balance. If this happens, make sure the flash also fires when you shoot the image.

- The ISO speed is set to the same setting to shoot the image.

z The custom white balance setting is not canceled even if settings are reset to default settings (p. 72).

Shooting – Advanced Functions

Changing the ISO Speed

Shooting Mode

Raise the ISO speed when you wish to reduce camera shake, when turning the flash off for use in dark conditions, or when a fast shutter speed is required.

1

Select *(ISO Speed) from the

FUNC. menu.

z See Selecting Menus and Settings (p. 62).

* The current setting is displayed.

2

Press select the ISO speed.

z A shot can be taken immediately by pressing the shutter button. The menu will reappear after the shot, allowing you to adjust the setting.

3

Press the FUNC. button.

79

80

Shooting – Advanced Functions z Higher ISO speeds increase the image noise. To take clean images, use as low an ISO speed as possible. z The AUTO setting selects the optimal speed. It will automatically raise the speed when the light from the flash is insufficient to illuminate the subject matter.

You can easily shoot images in dark places such as indoor settings by using the

(Indoor (p. 48)) option of the mode.

Changing the Photo Effect

Shooting Mode

You can shoot with different saturation and contrast color effects.

Effect Off

Vivid

Neutral

Low

Sharpening

Sepia

B/W

Records normally with this setting.

Emphasizes the contrast and color saturation to record in bold color.

Tones down the contrast and color saturation to record neutral hues.

Records subjects with softened outlines.

Records in sepia tones.

Records in black and white.

1

Select * (Effect OFF) from the

FUNC. menu.

z See Selecting Menus and Settings (p. 62).

* The current setting is displayed.

2

Select the photo effect using or

.

z If the LCD monitor is on, you can check the photo effect by viewing the image on the LCD monitor.

z A shot can be taken immediately by pressing the shutter button. The menu will reappear after the shot, allowing you to adjust the setting.

3

Press the FUNC. button.

Shooting – Advanced Functions

Setting the Auto Rotate Function

Shooting Mode

This camera is equipped with an Intelligent

Orientation sensor that detects the orientation of an image shot with the camera held vertically and automatically rotates it to the correct viewing orientation in the display.

You can set this function on/off.

1

In the [ (Set up)] menu, select

(Auto Rotate).

z See Selecting Menus

and Settings (p. 62).

2

Select [On] and press the MENU button.

81

Shooting – Advanced Functions z When this function is on, an icon showing the orientation of the camera appears at the upper right corner of the LCD monitor (when information display is on).

Normal

Right end down

Left end down z This function may not operate correctly when the camera is pointed straight up or down. Check that the arrow is pointing in the right direction and if it is not, then set the Auto Rotate function to

[Off].

z Even if the Auto Rotate function is set to

[On], the orientation of images downloaded to a computer will depend upon the software used to download the images.

z When the camera is held vertically to shoot, the Intelligent Orientation sensor judges the upper end to be “up” and the lower end to be “down”. It then regulates the optimal white balance and exposure for vertical photography. This function operates regardless of the on/off status of the Auto Rotate function.

z When changing the camera’s orientation between the horizontal and vertical positions, you may hear noise coming from the orientation detection mechanism. This is not a malfunction.

82

Playback – Advanced Functions

Rotating Images in the Display

You can rotate an image by 90° or 270° clockwise in the LCD monitor.

z Movie images cannot be rotated.

z If an image has been rotated in the camera before being loaded onto a computer, the particular software in use will determine whether or not the rotation settings are retained.

1

Original

In the [

(Rotate).

90° 270°

(Play)] Menu, select

z See Selecting Menus and Settings (p. 62).

2

Press or to select the image to be rotated and press the SET button.

z Press the SET button to rotate the image 90°,

270° and back to original orientation.

3

Press the MENU button.

z The Play menu appears again. Press the

MENU button again to close the menu.

z Rotated images can be magnified (p.

55).

z Images taken vertically with the auto rotate function (p. 81) set to [On] will automatically be rotated to the vertical position when viewed on the LCD monitor.

83

Playback – Advanced Functions

Attaching Sound Memos to Images

In Playback mode (including single image playback, index playback, and magnified playback), you can attach sound memos (up to 60 seconds) to an image. The sound data are saved in WAVE format.

1

Select (Sound Memo) from the

[ (Play)] menu.

z See Selecting Menus and Settings (p. 62).

z appears.

2

Select the image to which you wish to attach the sound memo and press the

SET button.

Sound Memo

Panel z The Sound Memo panel appears.

3

Select using or and press the SET button.

z The recording starts and the elapsed time is displayed. Speak towards the microphone of the camera.

z To stop recording, press the SET button. To restart recording press the SET button again.

z You can add as many sound memos as you like until their total reaches 60 seconds.

Playing the Sound Memos z Select in step 3. The icon is displayed on images with sound memos.

z To stop playback, press the SET button. To resume playback, press the SET button again. You can adjust the volume using or

.

Erasing the Sound Memos z Select in step 3.

Exiting the Sound Memos Settings z Press the MENU button.

84

z You cannot attach sound memos to movies.

z The “Memory card full” message will display when the SD card is full and you will be unable to record sound memos to that card.

z You cannot record or play back sound memos for images that already have an incompatible sound file attached. If you attempt to record or play such images the "Incompatible WAVE format" message will display. Incompatible sound files can be deleted with this camera.

z Sound memos for protected images cannot be erased (p. 86).

z You can also adjust the volume of the sound memo in the Set up menu (p. 68).

z If you set [Mute] to [On] in the Set up menu (p. 67), no sound is reproduced.

However, you can resume the sound and adjust the volume during movie playback using or .

Playback – Advanced Functions

Auto Play

Use this feature to automatically play back all of the images in the SD card (Auto Play). The

LCD monitor displays each image for approximately 3 seconds.

1

In the [ (Play)] menu, select

(Auto Play).

z See Selecting Menus and Settings (p. 62).

z Once you have selected it, Auto Play starts.

z As with the single image playback mode, using or during auto play will advance through the images more rapidly.

Pausing and Resuming Auto Play z You can pause Auto Play at any time by pressing the SET button. You can then restart it by pressing the SET button again.

Stopping Auto Play z To stop Auto Play, press the MENU button.

85

86

Playback – Advanced Functions z The display interval may vary for some images.

z Movie images play for the length of time that they were recorded.

z The power saving function (p. 24) is disabled during Auto Play.

Protecting Images

Use the protect feature to protect important images from accidental erasure.

1

In the [ (Play)] menu, select

(Protect).

z See Selecting Menus and Settings (p. 62).

2

Select an image you want to protect using or and press the SET button.

appears on protected images.

Protected Icon z To release the protection, press the SET button again.

z Image can be selected in both single image playback and index playback modes (p. 55,

56).

3

Press the MENU button.

z The camera returns to the menu screen.

Press the MENU button again to exit the menu screen.

Please note that formatting (initializing) an

SD card erases all data, including protected images (p. 19) and other file types. Please check the contents of the SD card before formatting it.

Playback – Advanced Functions

87

Various Functions

About Printing

There are two ways of printing images shot with this camera.

z You can easily print images stored in the SD card by connecting the camera to a direct print compatible printer

*1

with a cable and operating the camera’s button.

z You can specify the images on your SD card you want to print and how many copies you want (DPOF

*2

Print Settings), and then take the SD card to a participating photo lab that supports DPOF to have them printed out later.

*1

This camera complies with the industry standard PictBridge, therefore, you can connect the camera to non-Canon PictBridge compliant printers and print images.

*2

Digital Print Order Format

This manual explains the DPOF print settings. For information on how to print images, refer to the Direct

Print User Guide supplied with the camera. Also, refer to your printer's manual.

88

Print settings (DPOF Print Settings) (p. 90)

Image Transmission Settings (DPOF Transfer

Order) (p. 94)

Photo Lab

Direct Print Compatible Printers z CP Printer z Bubble Jet

Printer z Non-Canon PictBridge compliant printers

Direct Print Compatible Printing

- For details, see the Direct Print User Guide.

- Also, refer to your printer's manual.

„Printers that Can Be Used with this Camera

CP Direct Compatible CP Printers

- See the System Map

Direct Print Compatible Bubble Jet Printers

- For more information, visit your nearest Canon retailer.

89

Various Functions

DPOF Print Settings

You can select images on an SD card for printing and specify the number of print copies in advance using the camera. This is extremely convenient for sending the images to a photo developing service that supports

DPOF or for printing on a direct print function compatible printer.

Refer to the Direct Print User Guide for instructions on how to select print settings from the printer.

Selecting Images for Printing

1

In the [ (Play)] menu, select

(Print Order) and press the SET button.

z See Selecting Menus and Settings (p. 62).

2

Select [Order] press the SET button.

z The mark may appear on images that have had print marks set by another

DPOF compliant camera. These settings will be overwritten by any print marks set by your camera.

z The output of some digital printers or photo lab services may not reflect the specified print settings.

z Movies cannot be printed.

3

Select images for printing.

Single Images z When the print type

(p. 92) is set to

[Standard] or [Both], select an image using or . You can set the number of copies (up to

99) to be printed using

or .

Number of copies

90

z When the print type

(p. 92) is set to [Index], select an image using or and mark or remove marks from images using or .

A check mark appears on the marked image.

z Press to switch to index playback. You can use the same procedures to select images in index playback (3 images).

All the Images on a SD

Card z Press to switch to index playback (3 images).

z You can set one copy of each image to print by pressing the SET button, then selecting

[Mark all] using or , and pressing the

SET button again.

z When the print type is set to [Standard] or

[Both], the setting for the number of print copies can be changed for each image.

Various Functions

When [Index] is selected, the print settings can be deleted. For the instructions on changing settings, please reread Step 3 from the beginning.

z You can cancel all the settings by selecting

[Clear all].

4

Press the MENU button.

z The setting will be complete and the Print

Order menu will reappear.

z Images are printed in order from oldest to newest by the shooting date.

z A maximum of 998 images can be set.

z When [Print Type] is set to [Both], the number of copies can be set. When it is set to [Index], the number of copies cannot be set (only one copy will be printed).

z Print settings can also be assigned to images with the bundled software programs (ZoomBrowser EX or

ImageBrowser) on a computer. However, do not set the date in the DPOF print settings when printing images that have had the date embedded with the [Date

Stamp] function. This may cause the date to be printed twice.

91

Various Functions

Setting the Print Style

You can set up the print style as follows.

Print Type

Date

File No.

Standard

Index

Both

Print one image per sheet.

Print index prints

(multiple reduced-size images per page).

Print selected images both in standard and index format.

Include the date on the print.

Include the file number on the print.

1

In the [ (Play)] menu, select

(Print Order) and press the SET button.

z See Selecting Menus and Settings (p. 62).

2

Select [Set up] using or and press the SET button.

3

Select (Print Type), (Date) or

(File No.) using or .

4

Select a setting using or .

Print Type

Select [Standard],[Index] or [Both].

Date

Select [On] or [Off].

File No.

Select [On] or [Off].

92

5

Press the MENU button.

z The set up menu will close and the Print

Order menu will reappear.

z If you have chosen [Index] as the print type, you cannot set [Date] and [File

No.] to [On] at the same time.

z When connected to a CP printer, both

[Date] and [File No.] can be set to [On], if

[Print Type] is set to [Both] or [Standard], however, only the date is printed for the standard print and only the file number is printed for the index print.

The date prints as the date and time in the format specified in the Set Date/Time menu (p. 21).

Various Functions

Resetting the Print Settings

The Reset feature clears all print selections, and resets Print Type to [Standard], Date to

[On], and File No. to [Off].

1

In the [ (Play)] menu, select

(Print Order) and press the SET button.

z See Selecting Menus and Settings (p. 62).

2

Press select [Reset] and press the SET button.

3

Press or to select [OK] and press the SET button.

z Select [Cancel] and press the SET button to cancel the reset.

93

Various Functions

Image Transmission Settings

(DPOF Transfer Order)

You can use the camera to specify settings for images before downloading to a computer. Refer to the Software Starter Guide for instructions on how to transfer images to your computer. You cannot use this function to transfer several images at once to a Mac OS X computers.

The settings used on the camera comply with the

Digital Print Order Format (DPOF) standards.

The mark may appear on images that have had transfer marks set by another DPOF compliant camera. These settings will be overwritten by any marks set by your camera.

Selecting Images for Transferring

1

In the [ Play] menu, select

(Transfer Order) and press the

SET button.

z See Selecting Menus and Settings (p. 62).

2

Press select [Order] and press the SET button.

z You can remove all the transfer marks at once by selecting [Reset].

3

Select images for transferring.

For setting images one by one z Press or to select the image and mark or remove checkmarks from images using or

. The check marks are displayed when set.

z The above method can be used even if you press to switch to index playback (3images display).

94

For setting all images on the SD card z Switch to index playback

(a set of 3 images) by pressing .

z Press the SET button, select [Mark all] using

or and press the SET button again to mark all the images. (If you select [Clear all] instead of [Mark all], you can remove marks from all the images.) z You can select images using or and change the settings using or after

[Mark all] or [Clear all] has been selected.

4

Press the MENU button.

z The selection mode will turn off and the

Transfer Order menu will reappear.

z Images are transferred in order from oldest to newest by the shooting date.

z A maximum of 998 images can be marked.

Various Functions

Downloading Images to a Computer

The following methods can be used to download images recorded by the camera to a computer. Some methods are not applicable to all operating systems. z Downloading via a Camera to

Computer Connection

Windows

98

Windows

Me

Windows

2000

Windows

XP

Mac

OS 9

Mac

OS X z With this method, you download images using computer commands after you have installed the appropriate software.

See Connecting the Camera to a

Computer (p. 96) and the separate

Software Starter Guide.

Windows

98

Windows

Me

Windows

2000

Windows

XP z With this method, you download images using camera button operations after you have installed the appropriate software (the computer settings only need to be adjusted for the first download).

See Connecting the Camera to a

Computer (p. 96) and Downloading

Images by Direct Transfer (p. 100).

95

Various Functions

Windows

XP

Mac

OS X z With this method, you download images using computer commands without installing any software.

See Connecting the Camera to a Computer

(below) ("Software Installation Not

Required"), and Connecting the Camera to the Computer to Download Images without

Installing Software (p. 102).

z Downloading Directly from an SD Card

With this method, you download images using a card adapter or card reader.

See Downloading Directly from an SD Card (p.

103).

Connecting the Camera to a Computer

Computer System Requirements z Windows

OS

Windows 98 (Including Second Edition)

Windows Me

Windows 2000

Windows XP (Home Edition,

Professional)

96

Computer

Model

CPU

The above OS should be pre-installed on computers with built-in USB ports.

Windows 98/Windows Me/Windows

2000: Pentium 150 MHz or higher processor

Windows XP: Pentium 300 MHz or higher processor

For all of the above OS: Pentium 500

MHz or higher processor is recommended (for editing movies)

RAM

Windows 98/Windows Me/Windows

2000: 64 MB or more

Windows XP: 128 MB or more

For all of the above OS: 128 MB or more is recommended (for editing movies)

Interface USB

Free Hard

Disk

Space zCanon Utilities

- ZoomBrowser EX: 200 MB or more

(Including the PhotoRecord printing program)

- PhotoStitch: 40 MB or more zCanon Camera TWAIN Driver:

25 MB or more zCanon Camera WIA Driver:

25 MB or more

Display

800 x 600 pixels/High Color (16bit) or better is required

1,024 x 768 pixels or better is recommended z Macintosh

OS

Mac OS 9.0 - 9.2,

Mac OS X (v10.1/v10.2/v10.3)

Computer

Model

Free Hard

Disk

Space

Display

The above OS should be preinstalled on computers with built-in

USB ports.

CPU

RAM

PowerPC

Mac OS 9.0 - 9.2: 64MB or more of application memory

Mac OS X (v10.1/v10.2/v10.3):

128MB or more

Interface USB zCanon Utilities

- ImageBrowser: 120MB or more

- PhotoStitch: 30MB or more

800 x 600 pixels/ 32,000 colors or better is required

1,024 x 768 pixels or better is recommended

Various Functions

IMPORTANT

You must install the software and driver bundled on the supplied Canon Digital Camera Solution

Disk onto your computer before connecting the camera to a computer.

The camera will not operate correctly if you connect it to your computer before installing the driver and software. If this happens, please refer to the

Troubleshooting section of the Software

Starter Guide.

z You do not need to turn off the camera or computer power when making a USB connection.

z Please refer to your computer’s manual for information regarding the location of the USB port.

z You are recommended to use new AA size batteries, fully charged AA size

NiMH batteries or AC Adapter Kit

ACK800 (sold separately) to power the camera when connecting to a computer

(p. 121, 124).

97

Various Functions z All procedures performed with a connection to a USB 2.0 compliant board are not guaranteed.

1

Install the driver and the software applications bundled on the

Canon Digital Camera Solution

Disk (first time only).

z Please see the Software Starter Guide for the installation procedures.

2

Use the supplied interface cable to connect the computer's USB port to the camera's DIGITAL terminal.

USB port

DIGITALTerminal

1.Open the terminal cover with your finger nail.

2.Insert the connector with facing up.

Always grasp the connector’s sides to remove the interface cable from the camera's DIGITAL terminal.

3

Set the camera's mode switch to .

4

Press the ON/OFF button until the upper indicator lights green.

z Windows J Proceed to steps 4 and 5 below.

z Macintosh J Refer to the Software Starter

Guide and download images.

Interface cable

98

5

Select [Canon CameraWindow] in the events dialog that appears on the computer and click [OK] (first time only).

Various Functions

6

Click [Set] in the [CameraWindow

- Set Auto-Launch] window (first time only).

z The Download Image window will display.

If the events dialog fails to appear, click the

[Start] menu, followed by [Programs] or

[All Programs], [Canon Utilities],

[CameraWindows], and [CameraWindow -

Set Auto-Launch].

99

Various Functions z Using the software and computer to download images:

J See the Software Starter Guide.

z Using the Camera to Download Images

(Direct Transfer Function):

J See Downloading Images by Direct Transfer

(below).

Downloading Images by Direct

Transfer

Use this method to download images using camera operations.

Install the supplied software and adjust the computer settings before using this method for the first time (p. 98).

All Images

New Images

DPOF Trans.

Images

Select &

Transfer

Transfers and saves all images to the computer.

Transfers and saves to the computer only the images that have not been previously transferred.

Transfers and saves to the computer only the images with DPOF Transfer Order settings (p. 94).

Transfers and saves single images to the computer as you view and select them.

100

Wallpaper

Transfers and saves single images to the computer as you view and select them.

The transferred images display on the computer desktop.

1

Confirm that the

Direct Transfer menu is displayed on the camera's

LCD monitor.

z The blue.

button will light Direct Transfer Menu z Press the MENU button if the Direct Transfer menu fails to appear.

All Images/New Images/DPOF Trans.

Images

2

Use

and press the

button.

Various Functions z To cancel the transfer, press the SET button.

z The images will download and the Direct

Transfer menu will reappear.

Select & Transfer/Wallpaper

2

Use or to select or and press the button (or SET button).

3

Use or to select images to download and press the button (or SET button).

z The images will download. The will blink blue while downloading is in

button progress.

4

Press the MENU button.

z The Direct Transfer menu will reappear.

101

Various Functions

Only JPEG format images can be downloaded as wallpaper for the computer.

The option selected with the button is retained even when the camera's power is turned off. The previous setting will be in effect the next time the Direct Transfer menu is displayed. The image selection screen will appear directly when the

[Select & Transfer] or the [Wallpaper] option was last selected.

Connecting the Camera to the

Computer to Download Images without Installing Software

If you are using Windows XP or Mac OS X (v10.1/ v10.2/v10.3), you can use the software distributed with these operating systems to download images without installing the software bundled on the

Canon Digital Camera Solution Disk. This is useful for downloading images to a computer in which the software is not installed.

However, please note that there are certain limitations to downloading images with this method. For more details, please refer to the For

Windows

®

XP and Mac OS X Users leaflet.

1

Use the supplied interface cable to connect the computer's USB port to the camera's DIGITAL terminal.

z See steps 2 and 3 of p. 98.

2

Follow the onscreen instructions to proceed with downloading.

102

Downloading Directly from a SD card

1

Eject the SD card from the camera and insert it into a SD card reader connected to the computer.

z Refer to your PC card adapter’s or PC card reader’s manual for information regarding the connection between the computer and card adapter or card reader.

2

Double-click the icon of the drive with the SD card.

z Depending on the operating system, a window opens automatically.

3

Copy images from the card into a folder of your choice on the hard disk.

z The images are stored in the [xxxCANON] folders located in the [DCIM] folder (where xxx is a three-digit number from 100 to 998

(p. 105)).

Various Functions

Viewing Images on a TV Set

AV cable AVC-DC300 can be used to view images as you shoot or play them back.

1

Turn off the camera (p. 23).

z Turn off the television also.

2

Attach the AV Cable to the terminal on the camera.

103

Various Functions

3

Plug the other ends of the AV cable to the video in and audio in jacks on the TV.

Yellow Plug to the Video In Jack

Black Plug to the Audio In Jack

4

Turn on the TV and switch it to

Video mode.

5

Set the mode switch to Shooting mode or Playback mode.

6

Turn on the camera (p. 23).

z The image will appear on the TV. Shoot or playback images as usual.

z If the images are not appearing on the TV when shooting, press the DISP. button.

104 z No image will appear on the LCD monitor when the camera is connected to a TV monitor.

z If the TV is a stereo model, you can plug the audio plug into either the left or right

Audio In jack. Please refer to the TV’s manual for details.

z A TV set cannot be used in mode.

, z The video output signal can be switched

(NTSC or PAL) to accommodate different regional standards (p. 70). The default setting varies between regions.

- NTSC:Japan, U.S.A., Canada, Taiwan, etc.

- PAL: Europe, Asia (excluding

Taiwan), Oceania, etc.

If the video system is set incorrectly, the camera output may not display properly.

Resetting the File Number

You can select the way file numbers are assigned.

On

Off

The camera resets the file number to

100-0001 each time you insert a new

(unused) SD card. If you insert a card that already contains some images, numbering resumes from the next available number.

The camera remembers the last file number, and starts numbering from the next number when you insert a new SD card.

1

In the [ (Set up)] menu, select

(File No. Reset).

z See Selecting Menus

and Settings (p. 62).

2

Press or to select [On] or

[Off].

3

Press the MENU button.

Various Functions z Setting the File No. Reset to [Off] is useful for avoiding file name duplication when images are downloaded to a computer.

About File and Folder Numbers

Images are assigned file numbers from

0001 to 9900, and folders are assigned folder numbers from 100 to 998 (Folder numbers cannot contain 99 in the last two digits).

Folder numbers cannot contain

99 in the last two digits.

105

Various Functions

Folder File Capacity

Each folder usually contains up to 100 images.

However, since images shot in Continuous

Shooting or Stitch Assist mode are always saved into the same folder, a folder may contain more than 100 images. The number of images may also exceed 100 if a folder contains images copied from a computer or images shot with other cameras. Please note, however, that the images in folders containing 2001 or more images cannot be played back in this camera.

Customizing the Camera

(My Camera Settings)

My Camera allows you to customize the start-up image and start-up, shutter, operation and self-timer sounds. Each menu item has three choices.

Ex: Start-up image

[ ] [ ] [ ]

As default settings, My Camera setting has a science fiction theme and My Camera setting has an animal theme.

106

Changing My Camera Settings

1

Press the MENU button.

z The [ (Rec.)] or [

(Play)] menu appears.

2

Select [ (My

Camera)] using and select a menu item using or .

3

Select the contents you wish to set

Various Functions

4

Press the MENU button.

z Pressing the button closes the menu and makes the settings take effect.

z In Shooting mode, the menu can be closed by pressing the shutter button halfway.

z If you select [Theme] in Step 2, you can select a consistent theme for each of the

My Camera settings.

z If [Mute] in the [ (Set up)] menu is set to [On], no sound is reproduced except for the error warning signal regardless of the selected My Camera settings. The

Start-up image displays (p. 67).

107

Various Functions

Registering My Camera Settings

Images recorded onto the SD card and newly recorded sounds can be added as My

Camera settings to the and menu items. You can also use the supplied software to upload your computer’s images and sounds to the camera.

The following menu items can be saved to the camera.

z Start-up Image z Operation Sound z Shutter Sound z Start-up Sound z Self-timer Sound

To revert My Camera settings to default, register the default setting contents with the supplied software programs

(ZoomBrowser EX/ImageBrowser) on a computer.

Registering the SD Card Images and

Sounds

2

Press the MENU button.

z The [ (Play)] menu appears.

3

Select [ (My Camera)] using and select the menu item you wish to register using or .

4

Select or using or .

z appears.

1

Set the mode switch to .

z The camera powers into Playback mode.

108

5

Press the DISP. button.

z An image appears.

Various Functions

6b

Select (Record) using or

and press the SET button.

Start-up Image: Go to step 6a , 7a

Start-up Sound, Shutter Sound, Operation Sound, and Self-timer Sound: Go to step 6b , 7b

6a

Select the image you wish to register using or .

7a

Press the SET button.

z Recording starts.

z Recording stops when the time is exceeded.

Start-up Sound: 1 second

Operation Sound: 0.3 seconds

Self-timer Sound: 2 seconds

Shutter Sound: 0.3 seconds

7b

Select (Register) using or .

8

Select OK using or and press the SET button.

109

Various Functions z Sounds recorded using the Sound

Memo function (p. 84) and movies (p.

53) cannot be registered as My Camera settings.

z When you register new My Camera settings, the previously registered settings are erased.

File Format of My Camera Settings

My Camera settings should conform to the below file formats. However, SD card images shot with this camera can be registered as

My Camera settings regardless of the below formats (excluding movies and sound

memos (p. 84)).

z Start-up Image

• Recording Format JPEG (baseline JPEG)

• Sampling Rate 4:2:0 or 4:2:2

• Image Size

• File Capacity

320 x 240 pixels

20 KB or less z Start-up, Operation, Self-timer and Shutter

Sounds

• Recording Format WAVE (monaural)

• Quantization Bits 8 bit

• Sampling Frequency 11.025 kHz or

8.000 kHz

Recording Time

Start-up Sound

Operation Sound

11.025 kHz 8.000 kHz

1.0 sec. or less

1.3 sec. or less

0.3 sec. or less

0.4 sec. or less

Self-timer Sound

Shutter Sound

2.0 sec. or less

0.3 sec. or less

2.0 sec. or less

0.4 sec. or less

Any file formats other than those described above cannot be used with this camera.

As example of this function is to record “Say

Cheese”, the self-timer sound so the camera will play back this sound 2 seconds before the photo is taken. You could also record cheerful music to bring out the natural smiles of your subjects, or so

110

they can strike a pose fitting the music. In these ways you can customize your camera by creating and adding new My Camera settings.

See the supplied Software Starter Guide for more information on creating and adding to the My Camera Settings files.

Various Functions

111

List of Messages

The following table explains each of the messages that may appear on the LCD monitor.

z For messages which may appear when a printer is connected, refer to the Direct Print User

Guide.

Busy...

No memory card

Card locked!

Cannot record!

Memory card error!

Memory card full

Naming error!

Change the batteries

No image

Image too large

Incompatible JPEG format

112

The camera is recording image data to the SD card.

The playback mode is running.

You attempted to shoot or play back with no SD card installed.

The SD card is write-protected.

You attempted to shoot with no SD card installed.

There is something wrong with the SD card.

SD card is too full to accommodate more images or print settings.

The file could not be created because there is a file with the same name as the directory that the camera is attempting to create, or the highest possible file number has already been reached. In the Set up Menu, set the File Reset option to [On]. Save all the images you wish to retain onto a computer, then reformat the SD card. Please note that formatting will erase all the existing images and other data.

Battery charge is insufficient to operate the camera. Replace both batteries at the same time with new AA-size alkaline batteries (p. 17) or fully recharged Canon

NiMH batteries.

No images recorded on SD card.

You attempted to play back an image larger than 4064×3048 pixels or with a large file size.

You attempted to play back an incompatible JPEG file.

Corrupted data

RAW

Unidentified Image

Cannot magnify!

Cannot rotate!

Incompatible WAVE format

Cannot register this image!

Protected!

Too many marks!

Cannot mark image

Exx

List of Messages

You attempted to play back an image with corrupted data.

You attempted to play back an image recorded in the RAW format.

You attempted to play back an image that was recorded in a special format

(proprietary format used by the camera of another manufacturer) or a movie that was taken with another camera.

You attempted to magnify an image which was photographed with another camera, recorded in a different format, or edited on a computer or a movie clip.

You attempted to rotate an image which was photographed with another camera, recorded in a different format, or edited on a computer or a movie clip.

A sound memo cannot be added to this image since the format of the existing sound memo is incorrect.

You attempted to register an image recorded with another camera or a movie clip as a start-up image.

You attempted to erase protected image or movie clip.

Too many images have been marked for printing or transferring. Cannot process any more.

You attempted to set the print settings for a non-JPEG file.

Camera malfunctioned. Turn off the power and turn on again, then re-shoot or play back. If the same message recurs frequently, the camera may be damaged. Note down the error number [xx] and take the camera to a

Customer Support Help Desk. If this message appears immediately after you have taken a shot, the camera may not have shot the image. Switch to the

Playback mode and check whether the image was actually recorded.

113

Troubleshooting

Problem Cause

The camera will not operate.

The camera is turned off.

The SD card slot/battery cover is open.

z Be sure the cover is closed securely.

Batteries are loaded in the wrong direction.

z Reload the batteries in the correct direction.

Batteries are depleted.

Batteries are not the right type.

z Replace with unused alkaline (two AA-size batteries) or fully recharged Canon AA-size

NiMH batteries.

z Use a household power source.

z Use only new AA-size alkaline batteries or

Canon AA-size NiMH batteries.

(For the information about alkaline batteries, see Proper Battery Handling (p. 17))

Batteries are not making good electrical contact with the camera.

Solution z Turn the power on.

(See Turning the Power ON/OFF (p. 23))

The camera will not shoot.

Camera is in Playback mode.

The flash is charging.

z Wipe the battery terminals with a clean dry cloth.

z Reload the batteries several times.

z Change to a Shooting mode.

z Wait until the flash charges. You can press the shutter button when the upper indicator lights orange steadily.

114

Troubleshooting

Problem

The camera will not shoot.

Cause

The SD card is full.

The SD card is not formatted correctly.

The SD card is write-protected.

Solution z Insert a new SD card.

z Download images to your computer, then erase them from the card to free up more space.

z Format the SD card. (p. 19).

z The card may be defective (its logical may be corrupted). Contact Canon Customer Help Desk.

z Slide the write protect tab of the SD card upward (p. 15).

Cannot play back You attempted to play back images shot with another camera or images edited with a computer.

z Computer images that cannot be played back will playback if they are added to the camera using the bundled software program

ZoomBrowser EX or ImageBrowser. See the

ZoomBrowser EX/ImageBrowser User Guide

(PDF).

File name was changed with a computer or file location was changed.

Lens will not retract SD card slot/battery cover was opened with power on.

SD card slot/battery cover was opened while recording to the SD card (warning signal sounds).

z Set the file name or location to the file format/ structure of the camera (See About File and

Folder Numbers (p. 105)).

z First close the SD card slot/battery cover and then turn the power off.

z First close the SD card slot/battery cover and then turn the power off.

115

Troubleshooting

Problem

The batteries are consumed quickly.

Batteries do not charge with a separately sold battery charger.

Cause

Batteries are not the right type.

Battery capacity drops due to low ambient temperatures.

Battery terminals are dirty.

The batteries have not been used for over a year.

The batteries have lost their effectiveness.

Batteries were placed in the charger in the wrong direction.

Poor electrical contact, between batteries and the charger.

Battery terminals are dirty.

The batteries have lost their effectiveness.

Solution z Use only new AA-size alkaline batteries or

Canon AA-size NiMH batteries. (For the information about alkaline batteries, see Proper

Battery Handling (p. 17)) z If shooting in a cold area, keep the batteries warm (by placing them in an inner pocket, etc.) until ready to use them.

z Wipe them well with a dry cloth before use.

z Reload the batteries several times.

z Performance should return to normal after several charging cycles.

z Replace both batteries with new ones.

z Put batteries back into the charger in the correct direction.

z Be sure to set batteries firmly into the charger.

z Be sure that the power cable is firmly connected to the charger, and is firmly plugged in to the power outlet.

z Wipe them well with a dry cloth before charging.

z Replace both batteries with new ones.

116

Troubleshooting

Problem Cause

Autofocus function hampered by obstruction to AF-assist beam.

Solution

Shots are blurry or unfocused.

The camera was moving when you took the shot.

z Hold the camera steady when shooting.

z Be careful not to block the AF-assist beam flash part with a finger or other object.

The AF-assist beam is set to [Off].

z Turn the [AF-assist beam] setting [On] (p. 65).

The subject was outside the range over which the camera can focus.

z Ensure that there is at least 47 cm (1.5 ft.) between the camera lens and subject.

z When shooting subjects within the 5 to 47 cm

(2.0 in. - 1.5 ft.) wide angle range or the 30 to

47 cm (1.0 - 1.5 ft.) telephoto range, use Macro mode.

z When shooting distant subjects, set the camera to infinity mode.

The subject is difficult to focus on.

z Use the Focus Lock when shooting (See Using

the Focus Lock (p. 73)).

z Set the flash on.

The subject comes out underexposed

(too dark).

Insufficient light for shooting.

The subject is darker than the surroundings.

z Set exposure compensation to a positive value or use the spot metering function.

The subject is beyond the range of the flash.

z When flash is used, the distance between lens and subject should not exceed 2.0 m (6.6 ft.)

(W/T).

z Raise the ISO speed (See Changing the ISO

Speed (p. 79)).

117

Troubleshooting

Problem Cause Solution

The subject comes out overexposed

(too bright).

The subject is too close to the flash.

z When flash is used, the distance between lens and subject should be no less than 30 cm (1.0 ft.).

The subject is brighter than the surroundings.

z Set exposure compensation to a negative value or use the spot metering function.

A vertical bar of light (red, purple) appears on the

LCD monitor.

Light is shining or reflecting into the camera.

z Adjust the camera angle.

The flash mode is set so that the flash always fires.

z Set the flash to any other mode except on.

The subject is too bright.

z This is normal occurrence in devices containing

CCDs and does not constitute a malfunction.

(This red bar of light will not be recorded when shooting still photos, but it will be recorded when shooting movies.)

White dots or white asterisks appear on the image.

Light from the flash has reflected off dust particles or insects in the air. This occurs more frequently in the following condition:

- When shooting at the wide angle end.

z This is a phenomenon that occurs with digital cameras and does not constitute a malfunction.

The flash doesn't fire.

The flash mode is set to off.

z Set the flash mode to On.

118

Troubleshooting

Problem Cause

Image not showing on TV

Incorrect video system setting.

Solution z Set the video system to the appropriate setting,

NTSC or PAL, for your TV (p. 70).

Shooting mode set to , (Stitch

Assist).

z The output will not appear on a TV monitor in

, (Stitch Assist) mode. Shoot in a different mode.

Zoom does not operate.

Reading images from SD card is slow.

Zoom button was moved while shooting in movie mode.

SD card was formatted in another device.

z Operate the zoom before shooting in movie mode.

z Use a SD card formatted in your camera.

(See Formatting a SD Card (p. 19))

Recording images to SD card takes a long time.

119

Appendix

Replacing the Date Battery

If the LCD monitor displays the Date/Time menu when you turn on the camera, this means that the date battery has run down and the clock has stopped running. Please purchase a replacement battery (battery type

CR1220) and install it as follows.

The date battery is preinstalled at the factory and may therefore expire earlier than its rated lifespan after the camera has been purchased.

2

Open the SD card slot/battery cover (p. 13, 15) and remove the battery holder.

Be particularly careful to keep the date batteries out of the reach of children. Seek medical assistance immediately if a child swallows a battery since corrosive battery fluids could damage the stomach or intestinal wall.

3

Pull out the battery in the direction as shown with arrow.

(-) Negative end

1

120

Be sure that the camera is turned off.

4

Insert the new date battery into the holder with the negative end (-) facing up.

5

Replace the date battery holder back into its original position.

6

Set the date and time when the

Date/Time menu is displayed on the LCD monitor (p. 21).

The LCD monitor also displays the Date/

Time menu the very first time you turn on the camera. This is normal, and you don't need to replace the date battery.

Appendix

Using the Power Kits (Sold

Separately)

Using Rechargeable Batteries

(Battery and Charger Kit CBK4-200)

Included are the battery charger and four rechargeable AA-size NiMH (nickel metal hydride) batteries. Charge the batteries as shown below.

Four batteries

Two batteries

Charge Indicator

* Two batteries can be charged instead of four.

The indicator blinks while charging, then remains lit when charging is finished.

Four batteries are supplied with the Battery and Charger Kit CBK4-200, however, only two batteries are used for this camera.

121

Appendix z This charger can be used only to charge

Canon AA-size NiMH batteries NB-2AH.

Please do not attempt to charge NB-2AH batteries in any other type of charger.

z Never mix new batteries together with batteries that have been used in other devices.

z When recharging batteries from the camera, always recharge both of them at the same time.

z Do not mix batteries with different purchase dates or different charge states.

z Do not attempt to recharge fully charged batteries, as doing so may reduce or impair battery performance. Also, do not charge batteries for more than 24 consecutive hours.

z Do not recharge batteries in enclosed areas that tend to retain heat.

z Repeatedly recharging batteries before they become fully depleted may cause batteries to lose capacity. Do not recharge the batteries until the LCD monitor displays the "Change the batteries" message.

122 z Wipe the battery terminals well with a dry cloth in the following situations, as the terminals may be soiled with oil from one's skin or other dirt:

-If the battery usage time has considerably diminished.

-If the number of recordable images has considerably diminished.

-When charging the batteries (insert and remove the batteries two or three times before charging)

-When charging completes in a matter of a few minutes (the battery charger indicator remains lit) z You may not be able to fully charge the batteries due to their specifications right after purchase or after long periods of non-use. If this happens, use the batteries until their charge is depleted before charging them again. After doing this several times, battery performance will be restored.

z Since storing a fully charged battery for long periods of time (about one year) can shorten its lifecycle or affect performance, you are recommended to use the battery in the camera until it is completely discharged and to store it at normal temperature (23 °C/73 °F or less). If you do not use the battery for long periods of time, charge it fully and discharge it fully in the camera at least once a year before returning it to storage.

z If battery usage time is considerably low despite their terminals' being wiped and the battery charger's indicator remaining lit, it is possible that the batteries have reached the end of their lifespan. Switch to different, unused batteries. If you are purchasing new batteries, look for

Canon AA-size NiMH batteries.

z Leaving batteries in the camera or charger may damage it causing battery leakage. Remove batteries from the camera or charger and store in a dry cool location when not in use.

Appendix z It takes approximately 110 minutes when two batteries are loaded one at each end of the charger and 250 minutes with four for the charger to fully recharge them (as determined by testing at Canon facilities). Please do not charge batteries in areas where the temperature is outside the range of 0 to 35 °C (32 to

95 °F).

z Charging time varies according to ambient temperature and to the batteries' initial charge state.

z The battery charger may emit noise while charging. This is not a malfunction.

z You can also use Battery/Charger Kit

CBK100. For Battery/Charger Kit

CBK100, use Canon AA-size NiMH batteries NB-1AH.

123

Appendix

Using the AC Adapter Kit ACK800

Use of the separately sold AC Adapter Kit ACK800 is recommended when using the camera continuously for prolonged periods of time and when connecting to a computer.

2

Open the terminal cover, and connect the adapter's DC plug into the camera's DC IN terminal.

Be sure that the camera is turned off before connecting or disconnecting the compact power adapter.

1

Connect the power cord to the compact power adapter, and then plug the other end into the power outlet.

To a power outlet z Please unplug the adapter from the power outlet when you have finished using the camera.

Please do not attempt to use any AC adapter other than AC Adapter Kit ACK800 with your camera. Use of a different adapter may result in damage to the camera or to the adapter kit.

124

Camera Care and Maintenance

Use the following procedures to clean the camera body, lens, viewfinder, LCD monitor and other parts.

Camera

Body

Lens

LCD

Monitor,

Viewfinder

Wipe the camera body with a soft cloth or eyeglass lens wiper.

First use a lens blower brush to remove dust and dirt, then remove any remaining dirt wiping the lens lightly with a soft cloth.

z Never use synthetic cleaners on the camera body or lens. If dirt remains, contact the closest

Canon Customer Support Help

Desk as listed on the separate

Canon Customer Support leaflet.

Use a lens blower brush to remove dust and dirt. If necessary gently wipe the viewfinder and LCD monitor with a soft cloth or an eyeglass lens wiper to remove stubborn dirt.

z Never rub or press forcefully on the LCD monitor. These actions may damage it or lead to other problems.

Appendix

Never use water, paint thinner, benzene, or detergents to clean the camera, as these may cause damage or deformation.

125

Specifications

All data is based on Canon's standard testing methods. Subject to change without notice.

Camera Effective Pixels

Image Sensor

Lens

Digital Zoom

Optical Viewfinder

LCD Monitor

AF System

Shooting Distance

(from the front of the lens)

Shutter

Shutter Speeds

Light Metering System

Exposure Control System

Exposure Compensation

Sensitivity

Approx. 3.2 million

1/3.2-inch CCD (Total number of pixels: Approx. 3.3 million)

5.9 (W) - 13.2 (T) mm (35 mm film equivalent: 45 (W) - 100 (T) mm), f 3.8

Up to approx. 3.2x (Up to approx. 7x in combination with the optical zoom)

Real-image zoom viewfinder

1.5-inch. low-temperature polycrystalline silicon TFT color LCD, approx. 115,000 pixels

TTL autofocus

Focus lock available

Focusing frame: 9-point AiAF/1-point AF (center)

Normal: 47 cm (1.5 ft.) - infinity (W / T)

Macro: 5 - 47 cm (2.0 in. - 1.5 ft.) (W) / 30 - 47 cm (1.0 - 1.5 ft.) (T)

Mechanical shutter + electronic shutter

1 – 1/1500 sec.

z 1 – 1/8 sec. shutter speeds are available in manual or stitch assist mode if the flash is off.

z Slow shutter speeds of 1/6 sec. or slower operate with noise reduction.

Evaluative, Center-weighted average or Spot (center)

Program AE

± 2 stops in 1/3-stop increments

Auto, ISO 50/100/200/400 equivalent

(W): Wide angle (T): Telephoto

126

Specifications

White Balance

Flash

Flash Range

Shooting Modes

TTL auto, pre-set (available settings: Daylight, Cloudy, Tungsten,

Fluorescent, Fluorescent H) or Custom

Auto*, on*, off

* Red-eye reduction available

Normal: 47 cm - 2.0 m (1.5 - 6.6 ft.) (W/T)

Macro: 30 - 47 cm (1.0 - 1.5 ft.) (W/T) (ISO speed set to Auto)

Auto/Manual/Stitch assist/Special Scene (Portrait, Night Scene, Foliage,

Snow, Beach, Fireworks, Underwater, Indoor)/Movie

Continuous Shooting

Self-timer

PC-controlled Shooting

Approx. 1.3 shots/sec. (Large/Fine mode, LCD monitor off)

Activates shutter after an approx. 10-sec./approx. 2-sec. delay

Available (USB connection only. Exclusive software program is included in the camera kit.)

SD memory card Recording Media

File Format

Image Recording Format

Compression

Number of Recording

Pixels

Design rule for camera file system and DPOF compliant

Still images : JPEG (Exif 2.2)*

1

,

Movies : AVI (Image data : Motion JPEG; Audio data : WAVE (monaural))

Superfine, Fine, Normal

Still

Images

Large : 2048 x 1536 pixels Medium 1: 1600 x 1200 pixels

Medium 2: 1024 x 768 pixels Small : 640 x 480 pixels

Movies 640 x 480 pixels (30 sec.)*

160 x 120 pixels (3 min.)*

2

2

320 x 240 pixels (3 min.)*

2

: 10 frames/sec., : 15 frames/sec.

The data in parentheses refer to the maximum movie length per shooting.

127

Specifications

Playback Modes Single (histogram displayable), Index (9 thumbnail images), Magnified

(approx. 10x (max.) in LCD monitor), Auto play or Sound memos (up to 60 sec.).

Direct Print

Display Languages

My Camera Settings

Interface

Power Source

Canon Direct Print / Bubble Jet Direct / PictBridge compatible

14 languages available for menus and messages (English, German, French,

Dutch, Danish, Finnish, Italian, Norwegian, Swedish, Spanish, Chinese,

Russian, Portugese and Japanese)

The start-up image, start-up sound, shutter sound, operation sound and selftimer sound can be customized using the following methods:

1. Using the images and sounds recorded on a camera.

2. Using downloaded data from your computer using the supplied software.

USB (mini-B, PTP [Picture Transfer Protocol])

Audio/Video output (NTSC or PAL selectable, monaural audio)

1. Two AA-size alkaline batteries (included in the camera kit)

2. Two AA-size rechargeable NiMH batteries NB-2AH (sold separately)

3. AC Adapter Kit ACK800 (sold separately)

0 – 40°C (32 – 104°F) Operating Temperatures

Operating Humidity

Dimensions

10 – 90%

107.0 x 53.4 x 36.8 mm (4.2 x 2.1 x 1.4 in.) (excluding protrusions)

Weight Approx. 165 g (5.8 oz.) (camera body only)

*

1

*

2

This digital camera supports Exif 2.2 (also called “Exif Print”). Exif Print is a standard for enhancing the communication between digital cameras and printers. By connecting to an Exif Print-compliant printer, the camera’s image data at the time of shooting is used and optimized, yielding extremely high quality prints.

Maximum recording time per movie clip when using the separately sold SDC-128M SD card (not sold in some regions).

128

Battery Performance

AA Alkaline Batteries

(included with the camera)

AA NiMH Battery

(NB-2AH(fully charged))

Number of Shots

Based on the CIPA standard

LCD

Monitor Off

Playback

Time

Approx.

100 shots

Approx.

300 shots

Approx.

400 shots

Approx.

750 shots

Approx.

180 min.

Approx.

270 min.

•The actual figures will vary according to the shooting conditions and settings.

<Test Conditions>

Shooting:

Normal temperature (23 °C ± 2 °C/73 °F ± 3.6 °F), normal relative humidity (50% ± 20%), alternating wide angle end and telephoto end shots at 30 second intervals with the flash fired once every two shots and the camera power turned off after every tenth shot. Power is left off for a sufficient amount of time*, then the power is turned back on and the testing procedure is repeated.

• The included memory card is used.

• The LCD moniter is turned on for the CIPA standard.

* Until the battery returns to normal temperature.

Playback:

Normal temperature (23 °C ± 2 °C/73 °F ± 3.6 °F), nomal relative humidity (50% ± 20%), continuous playback at 3 seconds per image.

z For information on handling batteries,

see Proper Battery Handling (p. 17).

Specifications

SD Cards and Estimated

Capacities (Recordable Images)

† SD card included with the camera

SDC-16M SDC-128M

(2048 x 1536 pixels)

8

15

30

76

136

269

(1600 x 1200 pixels)

(1024 x 768 pixels)

(640 x 480 pixels)

Movie

(640 x 480 pixels)

(320 x 240 pixels)

(160 x 120 pixels)

41

73

51

80

13

24

46

23

126

20 sec.

40 sec.

98 sec.

121

216

411

211

372

651

460

711

1117

181 sec.

355 sec.

869 sec.

129

Specifications zThe maximum movie clip length is 30 sec. ( )* or

3 min. ( , )*. The times shown are the maximum continuous recording times.

* When using the separately sold SDC-128M SD card (not sold in some regions).

z (Superfine), (Fine) indicate the compression setting.

z L (Large), M1 (Medium 1), M2 (Medium 2), S

(Small), , and show resolution rates.

z Some SD cards are not sold in some regions.

L (Large)

M1 (Medium 1)

M2 (Medium 2)

S (Small)

2048 x 1536 pixels

1600 x 1200 pixels

1024 x 768 pixels

640 x 480 pixels

640 x 480 pixels

320 x 240 pixels

160 x 120 pixels

Image File Size (Estimated)

L

(2048 x 1536 pixels)

M1

(1600 x 1200 pixels)

M2

(1024 x 768 pixels)

S

(640 x 480 pixels)

Movie

(640 x 480 pixels)

(320 x 240 pixels)

(160 x 120 pixels)

1602 KB

1002 KB

570 KB

249 KB

893 KB

558 KB

320 KB

150 KB

660 KB/sec.

330 KB/sec.

120 KB/sec.

455 KB

278 KB

170 KB

84 KB

130

Specifications

NiMH Battery NB-2AH

Supplied with the separately sold NiMH Battery

NB4-200 set and the Battery/Charger Kit CBK4-200.

Type

Dimensions

Weight

Rechargeable nickel metal hydride battery

Nominal

Voltage

Typical

Capacity

Cycle Life

Operating

Temperatures

1.2 V DC

2300 mAh (min.: 2150 mAh)

Approx. 300 times

0 – 35 °C (32 – 95 °F)

Diameter: 14.5 mm (0.6 in.)

Length: 50 mm (2 in.)

Approx. 29 g (1.0 oz.)

Battery Charger CB-4AH/CB-4AHE

Supplied with the optional Battery and Charger Kit

CBK4-200.

Rated Input 100 – 240 V AC (50/60 Hz) /10W

Rated Output 565 mA*

1

, 1275 mA*

2

Charging

Time

Approx. 250 minutes*

1

Approx. 110 minutes*

2

Operating

Temperatures

0 – 35 °C (32 – 95 °F)

Dimensions 65.0 × 105.0 × 27.5 mm (2.6 × 4.1 × 1.1 in.)

Weight

CB-4AH: Approx. 95 g (3.4 oz.)

CB-4AHE: Approx. 97 g (3.4 oz.)

*

1

*

2

To charge four NB-2AH NiMH Batteries

To charge two NB-2AH NiMH Batteries loaded one at each end of the battery charger

Compact Power Adapter CA-PS800

Supplied with the separately sold AC Adapter Kit

ACK800.

Rated Input

100 – 240 V AC (50/60 Hz),

16 VA (100 V) – 26 VA (240 V)

Rated Output 3.15 V DC/2 A

Operating

Temperatures

0 – 40 °C (32 – 104 °F)

Dimensions

42.5 × 104 × 31.4 mm

(1.7 × 4.1 × 1.3 in.)

Weight (body) Approx. 180 g (6.4 oz.)

SD Memory Card

Interface

Dimensions

Weight

Compatible with SD memory card standard

32.0 × 24.0 × 2.1 mm

(1.3 × 0.9 × 0.1 in.)

Approx. 2 g (0.1 oz.)

131

Photo Tips and Information

This section offers photography tips.

Tip for Using the Self-timer (p. 43)

Normally, the camera shakes a little when you press the shutter button.

Setting the self-timer to delays the shutter release for two seconds and allows the camera to stop shaking, thus preventing a blurred image.

Even better results can be obtained by placing the camera on a stable surface or by using a tripod to shoot.

How to Adjust the Exposure (p. 76)

This camera automatically adjusts the exposure to shoot images with the optimal brightness.

However, recorded images may sometimes be brighter or darker than the actual image depending on the shooting conditions. If this happens, adjust the exposure compensation manually.

Underexposure

The whole recorded image is dark, which makes white elements of the image appear gray. Shooting bright subjects or in backlit conditions may cause the image to be underexposed. Adjust the exposure compensation towards the + end.

Optimal Exposure

Overexposure

The whole recorded image is bright, which makes black elements of the image appear gray. Shooting dark subjects or in dark places may cause the image to be overexposed. Adjust the exposure compensation towards the - end.

132

ISO Speed (p. 79)

The ISO speed is the numeric representation of the camera's sensitivity to light. The higher the ISO speed, the higher the sensitivity. A high ISO speed allows you to shoot images in dark indoor or outdoor conditions without a flash and also helps prevent blurred images due to camera shake. This is convenient when shooting images in places where flash photography is prohibited. The ISO speed setting makes full use of the available light, resulting in images that convey the feel of the place they were shot.

ISO 50 equivalent ISO 400 equivalent

Photo Tips and Information

133

Index

A

A/V (Audio/Video) Out Terminal . . . . . . . . . . . . . . 13, 103

AC Adapter Kit ACK800 . . . . . . . . . . . . . . . . . . . . . . . 124

Adjusting the Exposure . . . . . . . . . . . . . . . . . . . . . . . . . 76

AF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

AF-assist Beam . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 34

AiAF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33, 74

Auto Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

B

Battery

Battery Performance . . . . . . . . . . . . . . . . . . . . . . . 129

Battery Status Indications . . . . . . . . . . . . . . . . . . . . 18

Installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Proper Battery Handling . . . . . . . . . . . . . . . . . . . . . 17

C

Camera Care and Maintenance . . . . . . . . . . . . . . . . . 125

Camera Settings

AF-assist Beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

AiAF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Date Stamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Digital Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

File No. Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Power Saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Resetting the Settings to Default . . . . . . . . . . . . . . . 72

Compression . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

134

Continuous Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

D

Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

DC IN Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 65, 72

DIGITAL Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Digital Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

DIGITALTerminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Direct Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

Downloading Images to a Computer

Computer System Requirements . . . . . . . . . . . . . . . 96

Downloading Directly from a SD card . . . . . . . . . . 103

Downloading via a Camera to Computer

Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

DPOF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88, 90, 94

E

Erasing

Erasing All Images . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Erasing Single Images . . . . . . . . . . . . . . . . . . . . . . . 61

F

File Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Focus Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Formatting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138

Index

I

Image File Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130

Image Transmission Settings (DPOF Transfer Order) . 94

Index Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Infinity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

ISO Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

L

LCD Monitor

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26, 28

Using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Light Metering Modes . . . . . . . . . . . . . . . . . . . . . . . . . . 75

M

Macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Magnifying Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 84

Mode Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 25

Movies

Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Movie Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Sound Memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Viewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

My Camera Settings . . . . . . . . . . . . . . . . . . . . . . . 71, 106

O

ON/OFF Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

P

Photo Effect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Play Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Playback

Auto Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Displaying Images Individually . . . . . . . . . . . . . . . . . 55

Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Rotating Images in the Display . . . . . . . . . . . . . . . . 83

Viewing Images in Sets of Nine . . . . . . . . . . . . . . . . 56

Postcard Print Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Power Kits

Rechargeable Batteries . . . . . . . . . . . . . . . . . . . . . 121

Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . 24

Pressing Fully . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Pressing Halfway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Print/Share Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Printing

About Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

DPOF Print Settings . . . . . . . . . . . . . . . . . . . . . . . . 90

Print Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Resetting the Print Settings . . . . . . . . . . . . . . . . . . . 93

Selecting Images for Printing . . . . . . . . . . . . . . . . . . 90

Protecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

135

Index

Q

Quick Shots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

R

Rec. Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Red-eye Reduction . . . . . . . . . . . . . . . . . . . . . . . . . 39, 41

Red-eye Reduction Lamp . . . . . . . . . . . . . . . . . . . . 12, 41

Replacing the Date Battery . . . . . . . . . . . . . . . . . . . . . 120

Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

S

SD card

Formatting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Handling Precautions . . . . . . . . . . . . . . . . . . . . . . . . 20

Installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

SD Cards and Estimated Capacities (Recordable

Images) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129

Self-timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Set up Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Setting the Language . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Shooting – The Basics . . . . . . . . . . . . . . . . . . . . . . . . . 31

Shooting Panoramic Images

Framing a Subject . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Shutter Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Shutter Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 71

Single Image Playback . . . . . . . . . . . . . . . . . . . . . . . . . 55

Sound Memo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

136

Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Special Scene Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Stitch Assist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Strap Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

T

Terminal Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 98

Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

Turning the Power On/Off . . . . . . . . . . . . . . . . . . . . . . . 23

V

Viewfinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Viewing Images on a TV Set . . . . . . . . . . . . . . . . . . . . 103

W

White Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Z

Zoom Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

FCC Notice

(Digital Camera, Model PC1080)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions;

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the

FCC rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The cables with the ferrite core provided with the digital camera must be used with this equipment in order to comply with Class

B limits in Subject B of Part 15 on the FCC rules.

Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment.

Canon U.S.A. Inc.

One Canon Plaza, Lake Success, NY 11042, U.S.A.

Tel No. (516) 328-5600

Canadian Radio Interference Regulations

This Class B digital apparatus complies with Canadian ICES-003.

Réglementation canadienne sur les interférences radio

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

137

Functions Available in Each Shooting Mode

The following chart shows the functions and settings available in each shooting mode.

Function

Resolution

Compression

Large

Medium 1

Medium 2

Small

Postcard Print

Movie

Movie

Movie

Superfine

Fine

Normal

Auto

L

M1

M2

S

O * O * U* O * O * O * O * O * O * O * O *

O O U O O O O O O O O

O

O

O

O

U

U

O O O O O O O O

O O O O O O O O

O

O

O

O

O

O

O

O

O

O

O

O

O

O O U O O O O O O O O

O * O * U* O * O * O * O * O * O * O * O *

*

O

O *

O

O

U

O O O O O O O O

O * O * O O * O *

O * O *

Flash On –

O U O O O O O

O O

Off O O * U* O O O * O O O O O

* : Default settings O : Available U : Available only for the first image

– : Not available

: Setting remains in effect even when the camera is turned off.

Reference

Pages

37

51

37

37

39

138

Function

Red-eye Reduction

Quick Shot

AF-assist Beam

Single Shot

Continuous Mode

Shooting

Method Self-timer (10 sec.)

Self-timer (2 sec.)

AF System Selection

Macro Mode

Infinity Mode

Digital Zoom

On

Off

Exposure Compensation

Light

Metering

System

Evaluative

Metering

Center-Weighted

Averaging

Spot Metering

Reference

Pages

O

O

O

O

O

O

U

U

O O O O O

O O

– – – – – – – – –

O O O O O

O O O

39

38

34

O * O * U* O * O * O * O * O * O * O * O * O * –

O

O O O O O O O O

– 45

O O U O O O O O O O O O

43

O O U

O

O O U

O U

O O

O * O *

O U

O O O O O O O O O

O O O O O

O O

O O O O O

O O O

O O O O O

O O O

O O O O O O O O

O * O * O * O * O * O * O * O *

O O O O O O O O O

74

42

42

31

76

O O * O O O O O O O O O O

O

O

75

139

Function

White Balance

(1)

Photo Effect

ISO Speed

Auto Rotate

On

Off

(2)

(3)

O U

O U

O

(3)

O * O * U

O O U

– – – – – – – –

O

(3)

(3)

(3)

(3)

(3)

(3)

(3)

(3)

O

O * O * O * O * O * O * O * O *

O O O O O O O O

Reference

Pages

77

80

79

81

The default for the settings changed by the menu and button operations can be restored all at once except for Shooting mode, [Date/Time] and [Language] (p. 72).

(1)Cannot be adjusted when the photo effect is set to [Sepia] or [B/W].

(2)The white balance is set to [AUTO].

(3)The camera will automatically select the setting.

140

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents