Compaq BL40p - ProLiant - 1 GB RAM QuickSpecs

QuickSpecs
HP ProLiant BL40p Server Blade
Overview
42U Rack with ProLiant BL p-Class System Installed
1. BL p-Class Interconnects (2) in BL p-Class server blade enclosure (interconnect switch shown)
2. BL40p server blades (2) in BL p-Class server blade enclosure
3. BL p-Class power enclosure with hot-plug power supplies (6)
What's New
New I/O cable with two USB ports, one video port, one iLO port and kernel debug port. The I/O cable attaches to the front of the server blade
on the 3.0GHz and 2.2GHz models of the BL40p. The cable was specifically designed to aid in initial server image deployment. The cable
ships with all 3.0 GHz and 2.2GHz models.
Intel® Xeon MP FC-PGA 3.0 GHz\4MB or 2.2 GHz\2MB processor (quad capability)
ProLiant BL40p Server Blade includes:
Intel Xeon MP FC-PGA 3.0GHz\4MB, 2.2GHz\2MB, 2.8GHz\2MB or 2.0GHz\1MB processor (quad capability)
ServerWorks GC-LE Chipset
512-MB or 1024 MB of 2-way interleaved PC2100 ECC DDR (2 x 1 Interleaved Memory), expandable to 12 GB
Advanced Memory Protection with Online Spare
Five NC7781 PCI-X Gigabit NICs (embedded) with WOL (Wake On LAN) and Preboot eXecution Environment (PXE)
One additional 10/100T NIC dedicated to Integrated Lights-Out (iLO) Management
Smart Array 5i Plus Controller with battery-backed write cache (integrated on system board) standard on 2.8GHz/2M and 3.0GHz/4M models,
optional on 2.0GHz/1M and 2.2GHz/2M models
Wide Ultra3 SCSI Drive Cage standard supports up to four 1" hot plug hard drives
Two PCI-X slots (64b/100MHz capable) for redundant SAN connectivity
Integrated Lights-Out (iLO) Management (ASIC on motherboard)
Plugs vertically into p-Class server enclosure
Up to 12 BL40p blades fit in 42U rack
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 1
QuickSpecs
HP ProLiant BL40p Server Blade
Overview
What's Needed
ProLiant BL p-Class Server Blade Enclosure:
Server blades and interconnects slide into p-Class server blade enclosures for network connection and power
Server blade enclosure is 6U high and 10 bays across. The server blade enclosure bays consist of 2 (outer) interconnect bays and 8 server
bays. One server blade enclosure can hold up to 2 ProLiant BL40p server blades and 2 interconnects
2 types of interconnects available:
interconnect switches or patch panels
ProLiant BL p-Class Power Enclosure:
Use BL p-Class sizing tool to determine power based on your configuration
http://h30099.www3.hp.com/configurator/powercalcs.asp
BL p-Class power enclosure provides shared, external, redundant power
Power enclosure is 3U high and holds up to 6 hot-plug power supplies
Available in single-phase or three-phase power configurations
BL p-Class power enclosure with power supplies not needed if using facility DC (-48VDC ± 10%). In this case purchase DC option kit
ProLiant BL p-Class Power Distribution:
Distributes power from the power enclosure to the server blade enclosures
Three power distribution choices:
BL p-Class scalable bus bar
BL p-Class mini bus bar
BL p-Class power bus box
NOTE: Power requirements for a ProLiant BL p-Class system: 200V - 240V AC, 30 amp or facility DC -48V ± 10%.
BL p-Class server blade, server blade enclosure, interconnects and power enclosure protected by a limited three year warranty with
optional service uplifts available
ProLiant BL40p Server Blade
+
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 2
QuickSpecs
HP ProLiant BL40p Server Blade
Overview
BL p-Class Server Blade Enclosure
+
OR
Patch Panel (shown) or Patch Panel 2
GbE Interconnect Switch
or GbE2 Interconnect Switch (fiber or copper-based)
BL p-Class Interconnects
+
OR Facility DC
BL p-Class power enclosures and power supplies
+
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 3
QuickSpecs
HP ProLiant BL40p Server Blade
Overview
OR
Scalable bus bar
OR
BL p-Class power distribution
Bus boxes
Configuration Steps
For a complete configuration of the ProLiant BL40p, do the following:
1. Select a BL40p server blade:
Single Xeon MP 2.2GHz processor, 512-MB RAM (2 x 256MB) (345628-B21)
or
Single Xeon MP 3.0GHz processor, 1-GB RAM (2 X 512M) (344286-B21)
or
Two Xeon MP 2.0 GHz processors, 512-MB RAM (2 x 256MB) (293462-B21)
or
Two Xeon MP 2.8 GHz processors, 1-GB RAM (2 X 512MB) (336119-B21)
(NOTE: Additional options include processors, memory, and PCI-X HBAs.)
PLUS
2. Decide how many BL p-Class Server Blade Enclosures to purchase (each enclosure can hold up to 2 ProLiant BL40p server blades):
BL p-Class server blade enclosure with 8 Rapid Deployment Pack licenses (281404-B21)
or
BL p-Class server blade enclosure with Rapid Deployment Pack trial (243564-B21)
PLUS
Select an Interconnect Kit. Each Interconnect Kit contains a pair of interconnects. One pair of interconnects is required with each ProLiant BL
p-Class server blade enclosure:
BL p-Class RJ-45 Patch Panel (with 32 RJ-45 connectors) (230766-B21)
or
RJ-45 Patch Panel 2 with Fibre Channel pass through (required for Fibre Channel connectivity on BL20p G2 when using the RJ-45 Patch
Panel 2) (with 32 RJ-45 connectors and 16 Fibre Channel connectors) (306465-B21)
or
BL p-Class C-GbE2 Interconnect Kit (with 12 RJ-45 10/100/1000 T/TX/T external ports) (283192-B21) with or without optional ProLiant BL p-
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 4
QuickSpecs
HP ProLiant BL40p Server Blade
Overview
Class GbE Storage Connectivity Kit (with 16 Fibre Channel connectors) (required for ProLiant BL20p G2 Fibre Channel connectivity when
using the GbE2 Interconnect Switch)
or
BL p-Class F-GbE2 Interconnect Kit (with 8 LC 1000 SX and 4 RJ-45 10/100/1000 T/TX/T external ports) (283193-B21) with or without
optional ProLiant BL p-Class GbE Storage Connectivity Kit (with 16 Fibre Channel connectors) (required for ProLiant BL20p G2 Fibre Channel
connectivity when using the GbE2 Interconnect Switch)
or
BL p-Class C-GbE Interconnect Kit (with 4 RJ-45 10/100/1000 T/TX/T and 8 RJ-45 10/100 T/TX external ports (249655-B21)
or
BL p-Class F-GbE Interconnect Kit (with 4 LC 1000 SX and 8 RJ-45 10/100 T/TX external ports) (279720-B21)
PLUS
4. Select BL p-Class power enclosure and power supplies based on configuration. Use p-Class sizing tool to help determine power
configuration: http://h30099.www3.hp.com/configurator/powercalcs.asp
NOTE: Power enclosures and supplies are not needed if using facility DC (-48V ± 10%).
Single phase power enclosure with four hot-plug power supplies (NA/JPN- 239162-001) (Single-phase power enclosure holds a max of four
power supplies; no need to order additional power supplies with this option kit) (INTL - 239162-421)
or
Three-phase power enclosure with six hot-plug power supplies (NA/JPN- 230769-001) (INTL - 230769-421) (Three-phase power enclosure
holds a max of six power supplies no need to order additional power supplies with this option kit)
(Power enclosures and power supplies can also be purchased separately see options list for part numbers)
PLUS
5. Select power distribution:
Scalable bus bar - Supports up to 5 server blade enclosures (240560-B21)
or
Mini bus bar - Supports up to 3 server blade enclosures (240559-B21)
or
Power Bus Box - connects 1 power enclosure to 1 server blade enclosure (240562-B21)
*maximum depends on power input
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 5
QuickSpecs
HP ProLiant BL40p Server Blade
Standard Features (Server Blade)
ProLiant BL40p Server Blade
Processor
One of the following
depending on Model:
Xeon MP processor 3.0 GHz/4MB
Xeon MP processor 2.2 GHz/2MB
Xeon MP processor 2.8 GHz/2MB
Xeon MP processor 2.0 GHz/1MB
Upgradeability
Upgradeable to quad processing
Cache Memory
4-MB Level 3 Cache (on the 3.0GHz Model)
2-MB Level 3 Cache (on the 2.8GHz and 2.2GHz Models)
1-MB Level 3 Cache (on the 2.0GHz Model)
Chipset
ServerWorks GC-LE chipset
NOTE: For more information regarding ServerWorks, please see the following URL:
http://www.serverworks.com/products/overview.html.
Memory
Standard
512MB of 2-way interleaved PC2100 ECC DDR (2 X 256 MB) (1 processor model)
Maximum
12,288 MB
Standard
1024MB of 2-way interleaved PC2100 ECC DDR (2 X 512MB) (2 processor model)
Maximum
12,288 MB
NOTE: Memory must be installed in pairs. Advanced Memory Protection with Online Spare.
Network Controller
Six network adapters total:
Five NC7781 PCI-X Gigabit NICs (embedded) with WOL and PXE
One 10/100T iLO NIC dedicated to management
Manageability
Integrated Lights-Out (iLO) Management Advanced (ASIC on the System Board)
Internal Storage
Hard Drives
None ship standard
Maximum Internal
Storage
587.2 GB (internal drive cage) (4 x 146.8 GB Ultra320, 1" drives)
NOTE: All U320 Universal Hard Drives are backward compatible to U2 or U3 speeds.
Expansion Slots
Two Dedicated PCI-X slots (64b/100MHz capable) for redundant SAN connectivity
I/O cable
I/O cable connectors:
(2)USB ports, (1) video port, (1) iLO port and (1) kernel debug port
(1) cable ships with all 3.2GHz models
Connects to the front of the server blade for aid in 1st server blade deployment and troubleshooting
Tested USB devices (keyboard, mouse, floppy) are listed in options section of this QuickSpec
Diagnostic cable
Diagnostic Cable Connectors:
(1) iLO port and (1) kernel debug port
2 Diagnostic cables ship with every server blade enclosure
Connects to the front of the server blade for aid in troubleshooting
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 6
QuickSpecs
HP ProLiant BL40p Server Blade
Standard Features (Server Blade)
Dimensions
6U high x 7" wide. Fits within p-Class Server Blade Enclosure. One BL40p takes up four (4) server blade bays within
a server blade enclosure. Two BL40p server blades can fit within one server blade enclosure.
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 7
QuickSpecs
HP ProLiant BL40p Server Blade
Standard Features (Server Blade Enclosure and Interconnects)
ProLiant BL p-Class Server Blade Enclosure and Interconnects
ProLiant BL p-Class
Server Blade Enclosure
6U (10.5-inch), 19-inch wide
Holds up to 2 ProLiant BL40p server blades; 8 ProLiant BL20p server blades; or a combination of both.
10 bays per server blade enclosure:
8 bays for server blades
2 outside bays for interconnect modules (RJ-45 Patch Panels, RJ-45 Patch Panel 2, GbE2 Interconnect
Switches, or GbE Interconnect Switches)
Server blades slide in and connect to the server blade enclosure back plane for power and data connections
Up to 6 BL p-Class server blade enclosures fit in a 42U rack
Server blade management module attached to the back of each BL p-Class server blade enclosure to report all
server events and provide asset and inventory information
ProLiant BL p-Class
Power Requirements
Redundant 200V - 240V AC, 30 amp single-phase for NA and International
Redundant 208V 30amp 3-phase 4 wire, NA
Redundant 380 - 415V 20A 3-phase 5 wire, Intl
Redundant -48VDC ± 10%
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 8
QuickSpecs
HP ProLiant BL40p Server Blade
Standard Features (Server Blade Enclosure and Interconnects)
ProLiant BL p-Class
Interconnect Switch
Option
(Two switches per kit)
(Every BL p-Class server
blade enclosure requires two
interconnect switches OR
two RJ-45 patch panels)
Provides up to a 32 to 1 server networking cable reduction per server enclosure depending on the mix of BL20p,
BL20p G2, and BL40p servers. Each interconnect switch (two per enclosure) reduces up to sixteen internal server
network (NICs) ports to six external ports (four on a modular rear mounting interconnect module and two on the
switch front panel). This provides a total of twelve external ports per server blade enclosure. Only one to all twelve
external ports may be used per server blade enclosure.
The GbE2 Interconnect Kits (C-GbE2 and F-GbE2) are for applications that require network adapter consolidation to
1000 Mbps (Gigabit Ethernet), advanced network feature support including up to layer 7 switching, BL20p G2 Fibre
Channel pass-through, and 10 Gigabit Ethernet bandwidth connectivity to the network. Expandability of both layer 37 switching and 10 Gigabit Ethernet is supported with future GbE2 Interconnect Switch upgrade options. The optional
GbE2 Storage Connectivity Kit is required for BL20p G2 Fibre Channel pass-through when using the GbE2
Interconnect Switch.
The ProLiant BL p-Class F-GbE2 Interconnect Kit includes two GbE2 Interconnect Switches and two QuadSX
Interconnect Modules that provide eight (8) LC 1000 SX and four (4) RJ-45 10/100/1000 T/TX/T external ports
per server blade enclosure.
The ProLiant BL p-Class C-GbE2 Interconnect Kit includes two GbE2 Interconnect Switches and two QuadT2
Interconnect Modules that provide twelve (12) RJ-45 10/100/1000 T/TX/T external ports per server blade
enclosure.
The GbE Interconnect Kits (C-GbE and F-GbE) are for applications that require network adapter consolidation to 100
Mbps (Fast Ethernet).
The ProLiant BL p-Class F-GbE Interconnect Kit includes two GbE Interconnect Switches and two DualTSX
Interconnect Modules that provide four (4) LC 1000 SX and eight (8) RJ-45 10/100 T/TX external ports per
server blade enclosure.
The ProLiant BL p-Class C-GbE Interconnect Kit includes two GbE Interconnect Switches and two QuadT
Interconnect Modules that provide four (4) RJ-45 10/100/1000 T/TX/T and eight (8) RJ-45 10/100 T/TX external
ports per server blade enclosure.
Also included (per Interconnect Switch):
One (1) RS-232 DB-9 front panel out-of-band management port
Redundant crosslink ports connecting the two interconnect switches
Redundant power inputs and on-board redundant fans
Hot-plug and hot-remove with configuration retention and no need to cable/re-cable
Power ON, management, and per port status and speed LED indicators
Reset/power momentary push-button switch
HP ProLiant BL Interconnect Switch Management Utilities and User Documentation CD
Fully pre-configured for rapid deployment and immediate operation
ProLiant BL Interconnect Switch Management System and Utilities:
Full featured web-based and scriptable command line (CLI) interfaces, password protected multi-level user
accounts, Telnet, SNMP, BootP client, port mirroring, port-based VLANs and VLAN tagging, EtherChannel compatible
multi-port trunking, network time protocol, spanning tree protocol, broadcast/multicast storm control, flow control,
human readable/writeable configuration file, TFTP client, IP address security restrictions, auto-MDI/MDIX, autonegotiation and auto-sensing with full-duplex support, and more.
ProLiant BL p-Class RJ-45 6U (10.5-inch), Plugs into BL p-Class 6U server blade enclosures
patch panel
Used to pass NIC signals from all server blades in server blade enclosure out as RJ-45 connections
Supports Gigabit Ethernet network controllers. 16 RJ-45 connectors on the back of each BL p-Class 6U RJ-45 patch
(Two patch panels per kit)
panel (32 RJ-45 connections per server blade enclosure).
(Every BL p-Class server
blade enclosure requires two
interconnect switches OR
two RJ-45 patch panels)
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 9
QuickSpecs
HP ProLiant BL40p Server Blade
Standard Features (Server Blade Enclosure and Interconnects)
Required Network Cabling 10Base-T
Categories 3, 4 or 5 UTP (100 meters)
EIA/TIA-568 100-ohm STP (100 meters)
100Base-TX
Category 5 UTP (100 meters)
EIA/TIA-568 100-ohm STP (100 meters)
1000Base-T
Category 5 UTP (100 meters)
EIA/TIA-568 100-ohm STP (100 meters)
1000Base-SX
50/125 µm Multimode Fiber, 400 MHz/Km (500 meters)
50/125 µm Multimode Fiber, 500 MHz/Km (550 meters)
62.5/125 µm Multimode Fiber, 160 MHz/Km (220 meters)
62.5/125 µm Multimode Fiber, 200 MHz/Km (275 meters)
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 10
QuickSpecs
HP ProLiant BL40p Server Blade
Standard Features (Power System and Rack Information)
ProLiant BL p-Class
Power System and Rack
information
NOTE: To determine power configuration please refer to the ProLiant BL p-Class Overview and Planning Whitepaper
and sizing tool, please see the following URL:
http://h18000.www1.hp.com/products/servers/proliant-bl/p-class/20p/index.html
ProLiant BL p-Class
Power Enclosure
3U (5.25-inch), 19-inch wide, 29-inch deep (0.48-meter wide, 0.74-meter deep), Dual input single phase and three
phase models available. BL p-Class power enclosure provides external, shared hot-plug power. Each three-phase
power enclosure houses up to six hot-plug power supplies each single-phase power enclosures hold up to four
hot-plug power supplies to power the BL p-Class server blades and interconnects.
Please use the sizing utility to determine the power needed for each configuration.
http://h30099.www3.hp.com/configurator/calc/Power%20Calculator%20Catalog.xls
Power enclosures and power supplies are not needed if using facility DC (-48V DC ± 10%). If using facility DC, only
Facility DC Power Connection kit part number (240563-B21) is needed.
BL p-Class Power
Distribution
In the ProLiant BL p-Class infrastructure, redundant -48 VDC power (from the power enclosures or facility DC
power) is distributed from the power enclosures to the server blade enclosures through a bus bar system. Hinges
attach the ProLiant BL bus bars to the rails in a rack. The bus bars swing open from the center to enable easy rear
access to the server blades and network cables. Power is distributed redundantly through independent A- and Bsided bus bars.
Three different power distribution solutions are available depending on the maximum number of server blade
enclosures planned for the rack:
ProLiant BL p-Class scalable bus bar
ProLiant BL p-Class mini bus bar
NOTE: To support a full 42U rack server blades (6 server blade enclosures), two mini bus bars are needed.
ProLiant BL p-Class power bus box
Power Enclosures
Supported
Server Blade Enclosures
Supported
Max. Rack Space
Occupied
1 or 2
up to 5
36U
Mini Bus Bar
1
up to 3
21U
Power Bus Box
1
1
9U
Scalable Bus Bar
Required Power Source
Two 30-amp redundant power feeds per power enclosure
Connectors
NEMA receptacles (NA/Japan)
NA 1-phase
L6-30, 250v, 30A 3-wire
NA 3-phase
L15-30, 250V, 30A, 4-wire
IEC 309 Pin & Sleeve connectors (International)
Intl 1-phase
250V, 32A, 3- pin (2 pole + ground)
Intl 3-phase
380-415V, 32A, 5--pin
(4 pole + ground)
Optimized for power cabling from bottom and network cabling from top
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 11
QuickSpecs
HP ProLiant BL40p Server Blade
Standard Features
ProLiant Essentials
ProLiant Essentials Rapid
Foundation Pack
Deployment Pack
Software for the ProLiant
BL Server
Rapid Deployment Pack (RDP) is an automated deployment and provisioning solution
for all ProLiant servers. RDP includes the Altiris Deployment Solution and ProLiant
Integration Module featuring ProLiant server pre-configured events for OS installation,
and optimized software drivers, firmware and management agents. Every RDP CD
includes 10-node trial licenses for evaluation purposes. RDP requires a license for
each server deployed and are available for purchase with blade servers. For more
information, visit http://www.hp.com/servers/rdp.
HP Systems Insight Manger
HP Systems Insight Manager (HP SIM) help maximize system uptime and performance
and reduce system maintenance costs by providing proactive notification of problems
before those problems result in unplanned downtime or reduced productivity. HP SIM
is easy to set up to work with the Insight Management Agents, integrated Light-Out
and Remote Insight Light-Out Edition, and Version Control Agents to deliver robust
fault, configuration, and asset management as well as remote administration. With HP
Systems Insight Manager customers will also be able to take advantage of role-based
security; the ability to manage ProLiant, Integrity, and HP9000 systems; and plug-ins
for storage, client, printer, and power management as well as server rapid
deployment, performance management, and workload management. For more details
on HP Systems Insight Manager visit http://www.hp.com/go/hpsim.
Management Agents
The Management Agents form the foundation for HP's Intelligent Manageability
strategy. They provide direct, browser-based access to in-depth instrumentation built
into HP servers, workstations, desktops, and portables, and send alerts to HP
Systems Insight Manager and other enterprise management applications in case of
subsystem or environmental failures. For additional information about the Management
Agents and other management products from HP, please visit the management Web
site at http://www.hp.com/servers/manage.
Subscriber's Choice
Subscriber's Choice Driver and Support Alerts/Notifications is a web-based email
subscription service that provides software and driver change notifications for
ProLiant products. Sign up at http://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become available,
on a weekly or monthly basis.
ROMPaq, support software,
and
configuration utilities
The latest software, drivers, and firmware fully optimized and tested for your ProLiant
server and options, available in the RDP CD, SmartStart or downloadable from
Software and Drivers download pages, linked from the SmartStart website at
http://www.hp.com/servers/smartstart.
Survey Utility and diagnostics The most advanced configuration analysis, reporting and troubleshooting utilities used
utilities
by HP and at your fingertips, available in SmartStart.
NOTE: For more information regarding ProLiant Essentials Software, please see the following URL:
http://www.hp.com/servers/proliantessentials
Optional ProLiant
Essentials Value Packs
Optional software offerings that selectively extend the functionality of an Adaptive Infrastructure to address specific
business problems and needs:
Workload Management Pack - provides easier management of complex environments, improving overall
server utilization and enabling Windows® 2000 customers for the first time to confidently deploy multiple
applications on a single multiprocessor ProLiant Server.
Performance Management Pack - a performance management solution that identifies and explains hardware
performance bottlenecks on ProLiant servers and attached options enabling users to better utilize their
valuable resources.
Intelligent Networking Pack - detects and analyzes network bottlenecks or broken network linkages and
steers traffic to the optimum route based on network conditions.
NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to
http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials Value Pack product QuickSpecs for
more information.
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 12
QuickSpecs
HP ProLiant BL40p Server Blade
Standard Features
SmartStart
SmartStart is a tool that simplifies single server setup, providing a rapid way to deploy reliable and consistent server
configurations. SmartStart 7.00 and later can now deploy the ProLiant BL20P G3 and ProLiant BL40P servers, using
the I/O port with an attached USB CD-ROM device. To obtain a copy of SmartStart for your blade server, redeem the
coupon that is included with your Blade server or order your copy from the SmartStart web site. For more
information, please visit the SmartStart Web site at http://www.hp.com/servers/smartstart.
SmartStart version supported (minimum): SmartStart 6.20
OS Support
Microsoft® Windows 2000 Advanced Server
Red Hat Linux 8.0
Red Hat Enterprise Linux AS
SuSE Linux Enterprise Server 7
United Linux
Microsoft Windows Server 2003
NOTE: For a complete and up-to-date listing of supported OSs and versions, please visit our OS Support Matrix at:
http://www.hp.com/go/supportos.
NOTE: For an up-to-date listing of the latest drivers available for the HP ProLiant BL p-Class, please see:
http://h18004.www1.hp.com/support/files/server/us/family/model/5342.html.
NOTE: For a more complete and up-to-date information on Linux support, please visit HP Linux Web site at:
http://h18000.www1.hp.com/products/servers/linux/hpLinuxcert.html.
Intelligent Manageability
Integrated Lights-Out Advanced (iLO)
Virtual CD-ROM
Virtual Floppy *
Virtual Power Button Control
Dedicated LAN Connectivity
Automatic IP Configuration via DHCP/DNS/WINS
Industry Standard 128-bit Secure Sockets Layer (SSL) Security
IML and iLO Event Logging
Support for 12 user accounts with customizable access privileges
Automatic Server Recovery-2 (ASR-2)
Insight Manager 7
HP Systems Insight Manager
Redundant ROM
Remote Flash ROM
ROM Based Setup Utility (RBSU)
Advanced Configuration and Power Interface Specification Ready (ACPI)
Server Health Logs
HP Redundant Power Supply Utility
Pre-Failure Warranty (covers processors, as well as hard drives and memory)
HP Interconnect Switch Management System and Utilities (interconnect switch option)
Integrated Management Log (IML)
Off-Line Backup Processor capability
Dynamic sector repairing and drive parameter tracking (with Smart Array controllers)Redundant/adaptive load
balancing NIC Support
* Advanced features such as Graphical Remote Console and Virtual Floppy are included with the BL p-Class server.
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 13
QuickSpecs
HP ProLiant BL40p Server Blade
Standard Features
Availability
Power redundancy: Redundant AC feeds into power enclosures; redundant DC feeds from power enclosure to
server blade enclosures, 1 + 1 redundant power supplies
Four hot-plug SCSI hard drive bays and integrated RAID (Smart Array 5i Plus Controller with 64-MB total Memory on
the 5i Plus Memory Module) on every server blade. Battery Backed Write Cache Enabler Module standard on the 2
processor model and optional on the 1 processor model. Redundant ROM on each server blade
ECC Memory
Interconnects Switch Availability
Hot-plug and hot- remove with configuration retention and no need to cable/re-cable
Two network connections per server blade bay (four NICs total) routed to two redundant interconnect
switches
Redundant inter-switch communication with two sets of redundant uplink ports per each interconnect switch
Redundant front panel ports per each interconnect switch for diagnostics, management, and additional
uplinks
Redundant serial ports
Compatibility with PVST+ (GbE2 switch) and 802.1D Spanning tree protocol support for loop-free path
redundancy
Static IEEE 802.3ad (EtherChannel compatible) trunking with automatic port load balancing and failover
Redundant switch configuration images in memory (GbE2 switch)
Redundant fans per each interconnect switch
Redundant 1+1 power to each interconnect switch
Support for ProLiant network adapter teaming
Redundant configurable community strings and SNMP trap manager hosts
Redundant configurable syslog server, DNS server, and default gateways (GbE2 switch)
Security
Power-on password
Administrator's password
Integrated Lights-Out has 12 customizable user accounts and SSL encryption
Integrated Lights-Out can be disabled via a Global Setting
Interconnect switch multilevel user names and passwords, management interface time out period setting, SSH*, SCP
secure copy protocol*, port-based IEEE 802.1Q tagged VLANs, RADIUS user authentication and authorization*, and
IP address restriction
* GbE2 Interconnect Switch only.
Minimum Rack
Requirements
Mounts in HP Telco racks and Third Party racks that meet the following criteria:
Compatible with 19-inch Standard EIA rail sets
EIA rail-to-rail depth is 29 - 30"
Cabinet depth must be at least 36-inch deep overall (Additional min. 3.5-inch clearance from rear RETMA rail
to rear door, inclusive in the 36-inch overall depth)
Ample room for top and bottom cable egress (approximately 8 square inches for full rack configuration with
patch panel)
Must be capable of supporting 1600 lb (for full rack configuration)
Perforated front and rear doors to accommodate front-to-back cooling
Must have 65% open perforation on server blade enclosure doors to support airflow requirements
Optimized for use with the 10000 Series racks
NOTE: If using 7000 Series rack, Rack Extension Kit and High Air Flow Rack Door options are required.
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 14
QuickSpecs
HP ProLiant BL40p Server Blade
Standard Features
Rack Airflow
Requirements
Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling efficiency
for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum cooling, allowing
these racks to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and
to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow
830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate
airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be a
minimum of 2.75 inches (7 cm).
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement
ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal
damage.
NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD provided with the
server, or to the server documentation located in the Support section at the following URL:
http://h18000.www1.hp.com/products/servers/proliant-bl/p-class/40p/documentation.html.
Service and Support
Three-year limited warranty, including hardware diagnostic support, pre-failure warranty (coverage of hard drives,
memory and processors). The warranty is fully supported by HP Services and a worldwide network of resellers and
service providers. In addition 90-day's getting started software telephone support may be covered under the
warranty or available for an additional fee. Enhancements to warranty services are available through HP Care Pack
services.
NOTE: Sever Blade Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support.
NOTE: Server Blade Enclosure and Interconnects Limited Warranty includes 3 year Parts, 3 year Labor, 3-year onsite support.
Care Pack services provide a range of life cycle support options that let you choose the service levels that meet
your business requirements, from basic to mission-critical.
A full range of HP Care Pack hardware and software services are available including:
Installation and start up
Education courses
Extended onsite hardware coverage hours from same business day 13 hours, 5 day to 24 hours, 7 days call
window with options including 4-hour response or 6-hour Call To Repair
Comprehensive range of software technical support for Microsoft, Linux, ProLiant Essentials and VMWarebased IT solutions helping to deliver high level of application availability. Response times range from 30 mins
for critical problems to 2 hours.
System Management, Performance Services and Mission Critical Support Solution
HP Care Pack services for ProLiant BL p-Class server blades, cover the server blade and the p-Class blade
enclosure that the server blade is installed in as well as interconnects, power enclosure with power supplies and
power distribution.
NOTE: For more information on HP Care Pack services, contact any of our worldwide sales offices or resellers or
visit our worldwide Web site on the internet at: http://www.hp.com/hps/carepack
NOTE: For more complete information on HP Services offerings, customers and resellers, please visit us at:
http://www.hp.com/hps
NOTE: Additional information regarding worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 15
QuickSpecs
HP ProLiant BL40p Server Blade
Models
ProLiant BL40p P3.0-4MB,
1GB (2P)
344286-B21
ProLiant BL40p P2.2-2MB,
512MB (1P)
345628-B21
ProLiant BL40p P2.8-2MB,
1GB (2P)
336119-B21
ProLiant BL40p P2.0-1MB,
512MB (1P)
336118-B21
Processor(s)
(2) Xeon MP 3.0 GHz standard (up to 4 supported)
Cache Memory
4-MB Level 3 Cache (per processor)
Memory
1024 MB (Standard) of 2-way interleaved PC2100 ECC DDR (2 X 512 MB)
Network Controller
Five NC7781 PCI-X Gigabit NICs (embedded) with WOL and PXE
One additional 10/100T NIC dedicated to iLO Management
Storage Controller
Smart Array 5i Plus Controller (integrated on system board) with BBWC
Hard Drives
None ship standard
Internal Storage
Up to 587.2 GB maximum
Optical Drive
None
I/O cable
Included
Form Factor
6U high x 7" wide. Fits within p-Class Server Blade Enclosure
Processor(s)
(1) Xeon MP 2.2 GHz standard (up to 4 supported)
Cache Memory
2-MB Level 3 Cache (per processor)
Memory
512 MB (Standard) of 2-way interleaved PC2100 ECC DDR (2 X 256 MB)
Network Controller
Five NC7781 PCI-X Gigabit NICs (embedded) with WOL and PXE
One additional 10/100T NIC dedicated to iLO Management
Storage Controller
Smart Array 5i Plus Controller (integrated on system board)
Hard Drives
None ship standard
Internal Storage
Up to 587.2 GB maximum
Optical Drive
None
I/O cable
Included
Form Factor
6U high x 7" wide. Fits within p-Class Server Blade Enclosure
Processor(s)
(2) Xeon MP 2.8 GHz standard (up to 4 supported)
Cache Memory
2-MB Level 3 Cache (per processor)
Memory
1024 MB (Standard) of 2-way interleaved PC2100 ECC DDR (2 X 512 MB)
Network Controller
Five NC7781 PCI-X Gigabit NICs (embedded) with WOL and PXE
One additional 10/100T NIC dedicated to iLO Management
Storage Controller
Smart Array 5i Plus Controller (integrated on system board) with BBWC
Hard Drives
None ship standard
Internal Storage
Up to 587.2 GB maximum
Optical Drive
None
Form Factor
6U high x 7" wide. Fits within p-Class Server Blade Enclosure
Processor(s)
(1) Xeon MP 2.0 GHz standard (up to 4 supported)
Cache Memory
1-MB Level 3 Cache (per processor)
Memory
512 MB (Standard) of 2-way interleaved PC2100 ECC DDR (2 X 256 MB)
Network Controller
Five NC7781 PCI-X Gigabit NICs (embedded) with WOL and PXE
One additional 10/100T NIC dedicated to iLO Management
Storage Controller
Smart Array 5i Plus Controller (integrated on system board)
Hard Drives
None ship standard
Internal Storage
Up to 587.2 GB maximum
Optical Drive
None
Form Factor
6U high x 7" wide. Fits within p-Class Server Blade Enclosure
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 16
QuickSpecs
HP ProLiant BL40p Server Blade
Options
ProLiant BL40p Unique
Options
ProLiant Essentials
Value Pack Software
Xeon MP 3.0GHz 4MB Processor Option Kit
344287-B21
Xeon MP 2.2GHz 2MB Processor Option Kit
345627-B21
Xeon MP 2.8GHz 2MB Processor Option Kit
336121-B21
Xeon MP 2.0GHz 1MB Processor Option Kit
336120-B21
Xeon MP 1.5GHz 1MB Processor Option Kit
309330-B21
Xeon MP 2.0GHz 2MB Processor Option Kit
309331-B21
ProLiant p-Class Diagnostic Station Upgrade Kit for the BL40p
309329-B21
Rapid Deployment Pack, 10 User, V1.x
NOTE: This license allows 10 servers to be managed and deployed via the Deployment Server.
NOTE: Not necessary if you purchase the server blade enclosure with 8 Rapid Deployment Pack
licenses 281404-B21.
NOTE: Rapid Deployment pack is now available in Linux only environments.
269817-B21
Rapid Deployment Pack, 10 User, V1.x (Japan)
NOTE: This license allows 10 servers to be managed and deployed via the Deployment Server.
NOTE: Not necessary if you purchase the server blade enclosure with 8 Rapid Deployment Pack
licenses 281404-B21.
NOTE: Rapid Deployment pack is now available in Linux only environments.
269817-291
Rapid Deployment Pack, 1 User, V1.x
NOTE: This license allows 1 server to be managed and deployed via the Deployment Server.
NOTE: Not necessary if you purchase the server blade enclosure with 8 Rapid Deployment Pack
licenses 281404-B21.
NOTE: Rapid Deployment pack is now available in Linux only environments.
267196-B21
Rapid Deployment Pack, 1 User, V1.x (Japan)
NOTE: This license allows 1 server to be managed and deployed via the Deployment Server.
NOTE: Not necessary if you purchase the server blade enclosure with 8 Rapid Deployment Pack
licenses 281404-B21.
NOTE: Rapid Deployment pack is now available in Linux only environments.
267196-291
ProLiant Essentials Intelligent Networking Pack, Single Server License
NOTE: For use with a single server. Contains one license with a unique license activation key
and documentation.
372906-B21
ProLiant Essentials Intelligent Networking Pack, Flexible License
NOTE: For use with multiple servers. This part number can be used to purchase multiple
licenses with a single activation key. The quantity ordered for this part number will be the
quantity of licenses included in the kit in the form of a corresponding activation key. Use the
same key to activate all licenses in the actual quantity ordered. For a given order, one kit will be
delivered with the activation key, and documentation.
372950-B21
ProLiant Essentials Intelligent Networking Pack, Tracking License
NOTE: For use with signed and implemented Activation Key Agreements only. Purchase of this
part number entitles the customer to deploy additional licenses of the product under the terms of
the existing Activation Key Agreement.
NOTE: Nothing is delivered in conjunction with the purchase of this part number. Visit
http://h18004.www1.hp.com/products/servers/proliantessentials/license/akalic.html
for more information on Activation Key Agreements.
372951-B21
ProLiant Essentials Performance Management Pack, 10-Server License
NOTE: For use with 10 servers. Contains 10 licenses with one unique license
activation key and documentation.
374055-B21
ProLiant Essentials Performance Management Pack, Single-Server License
NOTE: For use with a single server. Contains one license with a unique license
activation key and documentation.
306696-B21
ProLiant Essentials Performance Management Pack, Flexible-Quantity License
NOTE: For use with multiple servers. This part number can be used to purchase multiple
licenses with a single activation key. The quantity ordered of this part number will be the
quantity of licenses included in the kit in the form of a corresponding activation key. Use the
same key to activate all licenses in the actual quantity ordered. For a given order, one kit will be
delivered with the activation key, and documentation.
306697-B21
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 17
QuickSpecs
HP ProLiant BL40p Server Blade
Options
ProLiant Essentials Workload Management Pack (Featuring Resource Partitioning Manager
version 2.0)
303284-B21
Flexible Quantity License Kit
302127-B21
License-Only - for use with a Master License Agreement
302128-B21
NOTE: For more information regarding ProLiant Essentials Software, please see the following
URL: http://h18000.www1.hp.com/products/servers/proliantessentials/index.html.
NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value
Packs. Refer to URL http://h18000.www1.hp.com/products/servers/proliantessentials/index.html
or the various ProLiant Essentials Value Pack product QuickSpecs for more information.
Processor
Memory (DDR DIMMs)
Hard Drives
Xeon MP 3.0GHz 4MB Processor Option Kit
344287-B21
Xeon MP 2.2GHz 2MB Processor Option Kit
345627-B21
Xeon MP 2.8GHz 2M Processor Option Kit
336121-B21
Xeon MP 2.0GHz 1M Processor Option Kit
336120-B21
Xeon MP 1.5GHz 1M Processor Option Kit
309330-B21
Xeon MP 2.0GHz 2M Processor Option Kit
309331-B21
512MB of PC2100 ECC DDR DIMM Memory Kit (2x256MB)
300678-B21
1024MB of PC2100 ECC DDR DIMM Memory Kit (2x512MB)
300679-B21
2048MB of PC2100 ECC DDR DIMM Memory Kit (2x1024MB)
300680-B21
4096MB of PC2100 ECC DDR DIMM Memory Kit (2x2048MB)
300682-B21
Wide Ultra320 – Universal Hot Plug
146.8-GB 10,000 rpm U320 Universal Hard Drive (1")
286716-B22
72.8-GB 10,000 rpm U320 Universal Hard Drive (1")
286714-B22
300-GB 10,000 rpm U320 Universal Hard Drive (1")
350964-B21
72.8-GB 15,000 rpm U320 Universal Hard Drive (1")
286778-B22
36.4-GB 15,000 rpm U320 Universal Hard Drive (1")
286776-B22
NOTE: All U320 Universal Hard Drives are backward compatible to U2 or U3 speeds.
NOTE: Please see the Hard Drive QuickSpecs for Technical Specifications such as capacity,
height, width, interface, transfer rate, seek time, physical configuration, and operating
temperature:
U320 Hard Drive QS:
http://h18000.www1.hp.com/products/quickspecs/11531_div/11531_div.HTML (Worldwide)
http://h18000.www1.hp.com/products/quickspecs/11531_na/11531_na.HTML (North America)
Storage Controllers
Tape Libraries
Battery Backed Write Cache Enabler Option Kit
255514-B21
Battery Backed Write Cache Enabler Option Kit (Japan)
255514-291
HP StorageWorks MSL6000 Tape Library
MSL6030, 1 drive, 30 slots, Ultrium 460, RM
330731-B22
MSL6030, 2 drive, 30 slots, Ultrium 460, RM
330731-B23
MSL6030, 1 drive, 30 slots, Ultrium 460, RM with embedded FC router
330731-B24
MSL6030, 2 drive, 30 slots, Ultrium 460, RM with embedded FC router
330731-B25
MSL6030, 1 drive, 30 slots, Ultrium 460, TT
330788-B21
MSL6030, 2 drive, 30 slots, Ultrium 460, TT
330788-B22
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 18
QuickSpecs
HP ProLiant BL40p Server Blade
Options
MSL6060, 2 drive, 60 slot, Ultrium 460, RM
331196-B21
MSL6060, 2 drive, 60 slot, Ultrium 460, RM with embedded FC router
331196-B22
MSL6060, 2 drive, 60 slot, Ultrium 460, TT
331195-B21
NOTE: Please reference the MSL6000 Tape Library QuickSpecs at
http://www.hp.com/go/automation for additional information needed to create a complete
solution; reference current compatibility information at http://www.hp.com/go/ebs
HP StorageWorks MSL5026S2 Tape Library
MSL5026S2, 1 drive, 26 slots, SDLT 320, RM
293472-B22
MSL5026S2, 2 drive, 26 slots, SDLT 320, RM
293472-B23
MSL5026S2, 1 drive, 26 slots, SDLT 320, RM with embedded FC router
293472-B24
MSL5026S2, 2 drive, 26 slots, SDLT 320, RM with embedded FC router
293472-B25
MSL5026S2, 1 drive, 26 slots, SDLT 320, TT
293473-B21
MSL5026S2, 2 drive, 26 slots, SDLT 320, TT
293473-B22
NOTE: Please reference the MSL5026S2 Tape Library QuickSpecs at
http://www.hp.com/go/automation for additional information needed to create a complete
solution; reference current compatibility information at http://www.hp.com/go/ebs
HP StorageWorks MSL5052S2 Tape Library
MSL5052S2, 2 drive, 52 slots, SDLT 320, RM
293474-B21
MSL5052S2, 2 drive, 52 slots, SDLT 320, RM with embedded FC router
293474-B24
MSL5052S2, 2 drive, 52 slots, SDLT 320, TT
293476-B21
NOTE: Please reference the MSL5052S2 Tape Library QuickSpecs at
http://www.hp.com/go/automation for additional information needed to create a complete
solution; reference current compatibility information at http:/www.hp.com/go/ebs
HP StorageWorks MSL5030 Tape Library
MSL5030, 1 drive, 30 slots, Ultrium 230, RM
301897-B22
MSL5030, 2 drive, 30 slots, Ultrium 230, RM
301897-B23
MSL5030, 1 drive, 30 slots, Ultrium 230, RM with embedded FC router
301897-B24
MSL5030, 2 drive, 30 slots, Ultrium 230, RM with embedded FC router
301897-B25
MSL5030, 1 drive, 30 slots, Ultrium 230, TT
301898-B21
MSL5030, 2 drive, 30 slots, Ultrium 230, TT
301898-B22
NOTE: Please reference the MSL5030 Tape Library QuickSpecs at
http://www.hp.com/go/automation for additional information needed to create a complete
solution; reference current compatibility information at http://www.hp.com/go/ebs
HP StorageWorks MSL5060 Tape Library
301899-B22
MSL5060, 2 drive, 60 slots, Ultrium 230, RM
301899-B23
MSL5060, 2 drive, 60 slots, Ultrium 230, RM with embedded FC router
301900-B21
MSL5060, 2 drive, 60 slots, Ultrium 230, TT
NOTE: Please reference the MSL5060 Tape Library QuickSpecs at
http://www.hp.com/go/automation for additional information needed to create a complete
solution; reference current compatibility information at http://www.hp.com/go/ebs
HP StorageWorks ESL9000 Series Tape Libraries
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 19
QuickSpecs
HP ProLiant BL40p Server Blade
Options
ESL9595 Extended Tape Library, 0 drive, 400 slots (card cage, Interface Mgr card, Command
View license)
343378-B21
ESL9595 Library, 0 drive, 400 slots
330833-B21
ESL9322 Extended Tape Library, 0 drive, 222 slots (card cage, Interface Mgr card, Command
View license)
343377-B21
ESL9595 Library, 0 drive, 222 slots
330832-B21
ESL9000 Ultrium 460 drive kit
330834-B21
ESL9000 Ultrium 230 drive kit
301930-B21
ESL9000 SDLT 320 drive kit
293414-B21
ESL9000 400 to 500 slot upgrade
330842-B21
ESL9000 500 to 595 slot upgrade
330842-B22
ESL9000 400 to 595 slot upgrade
330842-B23
ESL9000 222 to 322 slot upgrade
330840-B21
ESL9000 E2400-160 FC Interface Controller (one controller for every four drives)
330839-B21
License for Direct Backup Engine ESL
343375-B21
License for Secure Manager ESL
343376-B21
NOTE: Please reference the ESL9000 Series Tape Libraries QuickSpecs at
http://www.hp.com/go/automation for additional information needed to create a complete
solution; reference current compatibility information at http://www.hp.com/go/ebs
Magneto-Optical
Jukeboxes
HP StorageWorks 9.1 GB Mid-range Optical Jukeboxes
300mx, 2 drive, 32 slot jukebox
C1150M
600mx, 4 drive, 64 slot jukebox
C1160M
700mx, 2 drive, 76 slot jukebox
C1170M
NOTE: Please reference the Magneto-Optical Jukebox data sheets at
http://www.hp.com/go/optical for additional information needed to create a complete solution
HP StorageWorks 9.1 GB High-end Optical Jukeboxes
BL p-Class Server Blade
Enclosures
1200mx, 4 drive, up to 128 slots
C1104M
1200mx, 6 drive, up to 128 slots
C1105M
2200mx, 4 drive, up to 238 slots
C1111M
2200mx, 6 drive, up to 238 slots
C1107M
2200mx, 10 drive, up to 238 slots
C1110M
ProLiant BL p-Class Server Blade Enclosure (ProLiant Essentials Rapid Deployment Pack Trial)
243564-B21
ProLiant BL p-Class Server Blade Enclosure (8 ProLiant Essentials Rapid Deployment Pack
Licenses)
281404-B21
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 20
QuickSpecs
HP ProLiant BL40p Server Blade
Options
BL p-Class Interconnects ProLiant BL p-Class RJ-45 Patch Panel 2 with Fibre Channel pass-through (pair) (required for
ProLiant BL20p G2 Fibre Channel connectivity when using the RJ-45 Patch Panel 2)
NOTE: Only one interconnect kit required per server blade enclosure.
306465-B21
ProLiant BL p-Class RJ-45 Patch Panel (pair)
NOTE: Only one interconnect kit required per server blade enclosure.
230766-B21
ProLiant BL p-Class C-GbE2 Interconnect Kit (with pair of GbE2 Interconnect Switches and two
QuadT2 Interconnect Modules)
NOTE: Only one interconnect kit required per server blade enclosure.
283192-B21
ProLiant BL p-Class F-GbE2 Interconnect Kit (with pair of GbE2 Interconnect Switches and two
QuadSX Interconnect Modules)
NOTE: Only one interconnect kit required per server blade enclosure.
283193-B21
ProLiant BL p-Class C-GbE Interconnect Kit (with pair of GbE Interconnect Switches and two
QuadT Interconnect Modules)
NOTE: Only one interconnect kit required per server blade enclosure.
NOTE: The GbE Interconnect Switch supports server NIC speeds to 100 Mbps. It is
recommended that the GbE2 Interconnect Switch or a patch panel option be used if server NIC
speeds to 1000 Mbps are required.
NOTE: To meet applicable radio frequency (RF) emission limits, the sidewall panels on the ends
of any individual rack or a series of coupled racks and the front and rear doors must be installed
in any racks containing more than one ProLiant BL p-Class GbE Interconnect Kit.
249655-B21
ProLiant BL p-Class F-GbE Interconnect Kit (with pair of GbE Interconnect Switches and two
DualTSX Interconnect Modules)
NOTE: Only one interconnect kit required per server blade enclosure.
NOTE: The GbE Interconnect Switch supports server NIC speeds to 100 Mbps. It is
recommended that the GbE2 Interconnect Switch or a patch panel option be used if server NIC
speeds to 1000 Mbps are required.
NOTE: To meet applicable radio frequency (RF) emission limits, the sidewall panels on the ends
of any individual rack or a series of coupled racks and the front and rear doors must be installed
in any racks containing more than one ProLiant BL p-Class GbE Interconnect Kit.
279720-B21
ProLiant BL p-Class GbE2 Storage Connectivity Kit (with two Fibre Channel signal conditioning
cards and two OctalFC Interconnect Modules) (required for ProLiant BL20p G2 Fibre Channel
connectivity when using the GbE2 Interconnect Switch)
321745-B21
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 21
QuickSpecs
HP ProLiant BL40p Server Blade
Options
BL p-Class Power options NOTE: Use p-Class sizing tool to help determine power configuration:
http://www.hp.com/products/configurator.
Power Distribution
Diagnostic Options
Other Options
Single Phase Redundant Power Enclosure with 4 power supplies (NA/JPN)
(Single Phase Power Enclosure holds a maximum of 4 power supplies; no need to order
additional power supplies with this option kit)
239162-001
Single Phase Redundant Power Enclosure with 4 power supplies (Int'l)
(Single Phase Power Enclosure holds a maximum of 4 power supplies; no need to order
additional power supplies with this option kit)
239162-421
3 Phase Redundant Power Enclosure with 6 power supplies (NA/JPN)
(3 Phase Power Enclosure holds a maximum of 4 power supplies; no need to order additional
power supplies with this option kit)
230769-001
3 Phase Redundant Power Enclosure with 6 power supplies (Int'l)
(3 Phase Power Enclosure holds a maximum of 4 power supplies; no need to order additional
power supplies with this option kit)
230769-421
Single Phase Power Enclosure (empty) (NA/JPN)
(Holds up to 4 power supplies; power supplies are not included in this kit)
231710-001
Single Phase Power Enclosure (empty) (Int'l)
(Holds up to 4 power supplies; power supplies are not included in this kit)
231710-421
3 Phase Power Enclosure (empty) (NA/JPN)
(Holds up to 6 power supplies; power supplies are not included in this kit)
231709-001
3 Phase Power Enclosure (empty) (Int'l)
(Holds up to 6 power supplies; power supplies are not included in this kit)
231709-421
Single Power Supply
239161-B21
Facility DC Power Connection
240563-B21
ProLiant p-Class Scalable Bus Bar
240560-B21
ProLiant p-Class Mini Bus Bar
240559-B21
ProLiant p-Class Bus Power Box
240562-B21
ProLiant p-Class Diagnostic Station
NOTE: The Diagnostic Station allows access to the ProLiant p-Class server blades and the BL pClass interconnect switches outside of the server enclosure. The option provides power and a
data interface so that "offline" upgrade and diagnostic functions may be performed.
230743-B21
ProLiant p-Class Diagnostic Station Upgrade Kit for the BL40p
309329-B21
ProLiant BL p-Class Server Enclosure Shipping Bracket Option Kit
NOTE: Used to secure one server blade enclosure in a rack when moving.
293121-B21
ProLiant BL p-Class Power Enclosure Shipping Bracket Option Kit
NOTE: Used to secure one power enclosure in a rack when moving.
365044-B21
HP StorageWorks Modular HP StorageWorks Modular Smart Array 1000
Smart Array 1000
Modular Smart Array 1000 Controller
201723-B22
218231-B22
Modular Smart Array Fibre Channel I/O Module
218960-B21
Modular Smart Array 1000 Fibre Channel Adapter (FCA) 2101
245299-B21
Modular Smart Array hub 2/3
286763-B21
NOTE: Please see the Modular Smart Array 1000 QuickSpecs for additional options and
configuration information at
http://h18000.www1.hp.com/products/quickspecs/11033_na/11033_na.HTML (North America)
http://h18000.www1.hp.com/products/quickspecs/11033_div/11033_div.HTML (Worldwide)
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 22
QuickSpecs
HP ProLiant BL40p Server Blade
Options
Controllers and Host Bus
Adapters
Cluster Options
FCA2101 2Gb PCI FC HBA for Windows
245299-B21
FCA2404DC 2Gb PCI-X-to-FC HBA for W2K and Windows Server 2003
233264-B21
FCA2404 2Gb PCI-X HBA for W2K and Windows Server 2003
305573-B21
FCA2214 2Gb PCI-X FC HBA for Windows and Linux
281541-B21
FCA2214DC 2 Gb Dual Channel PCI-X FC HBA for Windows
321835-B21
ProLiant Cluster HA/F100 for Modular Smart Array 1000
252408-B24
ProLiant Cluster HA/F100 for Modular Smart Array 1000 (Japan)
252408-294
NOTE: For additional information regarding the ProLiant Cluster for HA/F100, HA/F200 for
Modular Smart Array 1000 please see the following QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11035_na/11035_na.html
(North America)
http://h18000.www1.hp.com/products/quickspecs/11035_div/11035_div.html (Worldwide)
ProLiant Cluster HA/F500 Enhanced Kit for EVA 2
254623-B24
ProLiant Cluster HA/F500 Basic Kit for EVA 2
313047-B23
NOTE: For additional information regarding the HP ProLiant Cluster for ProLiant Cluster HA/F500
for Enterprise Virtual Array please see the following QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11055_na/11055_na.html
(North America)
http://h18000.www1.hp.com/products/quickspecs/11055_div/11055_div.html (Worldwide)
ProLiant Cluster HA/F500 Enhanced Kit for MA8000/EMA12000/EMA16000
379937-B27
ProLiant Cluster HA/F500 Enhanced DT Kit for MA8000/EMA12000/EMA16000
164227-B25
NOTE: For additional information regarding the HP ProLiant Cluster for HA/F500 please see the
following QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/10232_na/10232_na.html
(North America)
http://h18000.www1.hp.com/products/quickspecs/10232_div/10232_div.html (Worldwide)
StorageWorks Enterprise StorageWorks Director 2/64
Modular
NOTE: Please see the StorageWorks SAN Director 2/64 QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/11003_na/11003_na.HTML
Array 16000 FC
(North America)
http://h18000.www1.hp.com/products/quickspecs/11003_div/11003_div.HTML (Worldwide)
USB Options
USB Easy Access Keyboard (carbonite)
286809-B21
DC168B#
USB 2-Button Scroll Mouse (carbonite)
DD441B
USB Floppy
DC141B
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 23
QuickSpecs
HP ProLiant BL40p Server Blade
Options
USB Easy Access Keyboard (Carbonite) Country Key Code
HP Rack 10000 Series
(Graphite Metallic)
Dash #
Description
Dash #
Description
A2M
ICELAND
ABT
HE
AB0
TAWA
ABU
UK
AB1
KOR
ABV
ARA
AB2
PRC
ABX
FIN
AB6
FRA
ABY
DEN
AB7
GRK
ABZ
ITL
AB8
TURK
AC0
BEL
AB9
PORT
AC4
BRZ
ABA
US
ACB
RUSS
ABB
EURO
AKB
CZE
ABC
FCAN
AKC
HUNG
ABD
GR
AKD
POL
ABE
SP
AKL
THAI
ABF
FR
AKN
BHCSY
ABH
NL
AKR
SLOV
ABJ
Japan
ARK
ICELAND
ABM
LA
B15
KAZ
ABN
NOR
UUZ
SWISS
ABS
SW
HP S10614 (14U) Rack Cabinet - Shock Pallet
292302-B22
HP Rack 10842 (42U, 800mm wide) - Pallet
245160-B21
HP Rack 10842 (42U, 800mm wide) - Shock Pallet
245160-B23
HP Rack 10647 (47U) - Pallet
245161-B21
HP Rack 10647 (47U) - Crated
245161-B22
HP Rack 10642 (42U) - Pallet
245161-B23
HP Rack 10642 (42U) - Shock Pallet
245162-B21
HP Rack 10642 (42U) - Crated
245162-B22
HP Rack 10636 (36U) - Pallet
245162-B23
HP Rack 10636 (36U) - Shock Pallet
245163-B21
HP Rack 10636 (36U) - Crated
245163-B22
HP Rack 10622 (22U) - Pallet
245163-B23
NOTE: -B21 (pallet) used to ship empty racks shipped on a truck
-B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and
Channels)
-B23 (crated) used for air shipments of empty racks
NOTE: Not all HP equipment is qualified to be shipped in the Rack 10000 series.
Rack Options for HP
Rack 10000 Series
HP Rack Plinth Kit (Carbon)
251960-B21
HP Rack Light Kit (Neon)
361589-B21
800mm Wide Stabilizer Kit (Graphite)
255488-B21
NOTE: Supported by the Rack 10842 cabinet only.
600mm Stabilizer Kit – Graphite
246107-B21
Baying Kit for Rack 10000 series (Carbon)
248929-B21
42U Side Panel – Graphite Metallic
246099-B21
110V Fan Kit (Graphite)
257413-B21
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 24
QuickSpecs
HP ProLiant BL40p Server Blade
Options
NOTE: Roof Mount Includes power cord with IEC320-C13 to Nema 5-15P.
220V Fan Kit (Graphite)
257414-B21
NOTE: Roof Mount Includes power cord with IEC320-C13 to Nema 6-15P.
36U Side Panel – Graphite Metallic
246102-B21
47U Side Panel – Graphite Metallic
255486-B21
9000/10000 Series Offset Baying Kit (42U)
248931-B21
NOTE: This kit can be used to connect 9000 and 10000 series racks of the same U height
together. Kit contents include hardware for connecting racks and a panel to cover the 100mm
gap at the rear of the two racks.
NOTE: For additional information regarding Rack Options, please see the following URL:
http://h18000.www1.hp.com/products/servers/proliantstorage/rack-options/index.html.
Ballast Option Kit
120672-B21
9000/10000 Series Offset Baying Kit (42U)
248931-B21
NOTE: This kit can be used to connect 9000 and 10000 series racks of the same U height
together. Kit contents include hardware for connecting racks and a panel to cover the 100mm
gap at the rear of the two racks.
NOTE: For additional information regarding Rack Cabinets, please see the following URL:
http://h18000.www1.hp.com/products/servers/proliantstorage/rack-options/index.html
Rack Rail Adapter Kit (25" depth)
120675-B21
100 kg Sliding Shelf
234672-B21
Monitor/Utility Shelf - Graphite
253449-B21
Depth Adjustable Fixed Rail
332558-B21
Cable Management D-Rings Kit
168233-B21
Server Console Switch 1 x 4 port (100-230 VAC)
400336-001
Server Console Switch 1 x 4 port (100-230 VAC) (Int’l)
400336-B31
Server Console Switch 1 x 4 port (100-230 VAC) (Japan)
400336-291
IP Console Switch Box, 1 x 1 x 16
262585-B21
IP Console Switch Box, 3 x 1 x 16
262586-B21
CPU to Server Console Cable, 12’
110936-B21
CPU to Server Console Cable, 3’
110936-B24
CPU to Server Console Cable, 7’
110936-B25
IP CAT5 Cable 3’, 4 pack
263474-B21
IP CAT5 Cable 6’, 8 pack
263474-B22
IP CAT5 Cable 12’, 8 pack
263474-B23
IP CAT5 Cable 20’, 4 pack
263474-B24
IP CAT5 Cable 40’, 1 pack
263474-B25
Switch Box Connector Kit (high voltage) (Int'l)
144007-B33
TFT5600 Rack Keyboard Monitor
221546-xx1
TFT7210R Rack Mounted 17" Monitor
348373-B21
NOTE: For a complete list of Monitors please view the following URL:
http://h18004.www1.hp.com/products/monitors/
1U Rack Keyboard & Drawer (Carbon)
257054-xx1
Country Code Key (for 1U Rack Keyboard & Drawer (PN 257054-xx1))
XX = 001
US
XX = 091
Norway
XX = 031
UK
XX = 101
Sweden/Finland
XX = 041
Germany
XX = 111
Switzerland
XX = 051
France
XX = 131
Portugal
XX = 061
Italy
XX = 181
Belgium
XX = 071
Spain
XX = 291
Japan
XX = 081
Denmark
XX = B31
International
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 25
QuickSpecs
HP ProLiant BL40p Server Blade
Options
NOTE: For additional information regarding Rack Options, please see the following URL:
http://h18000.www1.hp.com/products/servers/proliantstorage/rack-options/index.html.
Rack Options for Telco
Racks
Bus Bar Telco Rail Option Kit
245249-B21
Enclosure Telco Rail Option Kit
266076-B21
Service and Support
Offerings (HP Care Pack
Services)
NOTE: The HP Care Pack services for ProLiant BL p-Class server blades, cover the server
blade and the p-Class blade enclosure that the server blade is installed in as well as
interconnects, power enclosure with power supplies and power distribution.
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage,
3 Years
UA203A
Next Business Day On-site Service, 5-Day x 9-Hour Coverage,
3 Years, Electronic
UA203E
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years
UA204A
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
UA204E
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years
UA205A
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
UA205E
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years
UA206A
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
UA206E
Installation & Start-up Services
ProLiant BL p-Class Blade Server Hardware Installation
UA219A
ProLiant BL p-Class Blade Server Hardware Installation, Electronic
UA219E
ProLiant BL p-Class Enclosure and Server Blade Hardware Installation
U4971A
ProLiant BL p-Class Enclosure and Server Blade Hardware Installation, Electronic
U4971E
Provides for the Installation and Start-up of Compaq's Rapid Deployment Pack on a Customer
supplied server designated as a Deployment Server. Includes the deployment of a single server.
This new server will be deployed using either one of the pre-configured scripts or an image. In
addition, the service will provide for the capture and storage of the configuration of the newly
deployed server and orientation on product usage. To be delivered during standard office ours,
standard office days.
U5683A
Provides for the Installation and Start-up of Compaq's Rapid Deployment Pack on a Customer
supplied server designated as a Deployment Server. Includes the deployment of a single server.
This new server will be deployed using either one of the pre-configured scripts or an image. In
addition, the service will provide for the capture and storage of the configuration of the newly
deployed server and orientation on product usage. To be delivered during standard office ours,
standard office days. Electronic.
U5683E
NOTE: For more information, customer/resellers can contact
http://www.hp.com/hps/carepack/services/
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 26
QuickSpecs
HP ProLiant BL40p Server Blade
Memory
ProLiant BL40p Server Blade (2P Model)
Standard Memory
1024-MB of 2-way interleaved PC2100 ECC DDR installed (2 x 512-MB SDRAM DIMM)
Standard Memory Plus Optional Memory
Up to 9216-MB of 2-way interleaved PC2100 ECC DDR memory is available with the installation of optional DDR DIMM memory expansion kits.
Standard Memory Replaced with Optional Memory
Up to 12288-MB of 2-way interleaved PC2100 ECC DDR memory is available with the removal of standard memory and the installation of optional
DDR DIMM memory expansion kits.
Memory
Standard
Optional
Maximum
Slot
1,024MB
9,216MB
12,288 MB
1
2
3
4
5
6
512 MB
512 MB
2048 MB
512 MB
512 MB
2048 MB
Empty
2048 MB
2048 MB
Empty
2048 MB
2048 MB
Empty
2048 MB
2048 MB
Empty
2048 MB
2048 MB
Following are memory options available from HP:
2512MB of PC2100 ECC DDR DIMM Memory Kit (2x256MB)
300678-B21
1024MB of PC2100 ECC DDR DIMM Memory Kit (2x512MB)
300679-B21
2048MB of PC2100 ECC DDR DIMM Memory Kit (2x1024MB)
300680-B21
4096MB of PC2100 ECC DDR DIMM Memory Kit (2x2048MB)
300682-B21
ProLiant BL40p Server Blade (1P Model)
Standard Memory
512MB of 2-way interleaved PC2100 ECC DDR installed (2 x 256-MB SDRAM DIMM)
Standard Memory Plus Optional Memory
Up to 8704-MB of 2-way interleaved PC2100 ECC DDR memory is available with the installation of optional DDR DIMM memory expansion kits.
Standard Memory Replaced with Optional Memory
Up to 12288-MB of 2-way interleaved PC2100 ECC DDR memory is available with the removal of standard memory and the installation of optional
DDR DIMM memory expansion kits.
Memory
Standard
Optional
Maximum
Slot
512MB
4,608MB
12,288MB
1
256 MB
256 MB
2048 MB
2
256 MB
256 MB
2048 MB
3
Empty
2048 MB
2048 MB
4
Empty
2048 MB
2048 MB
5
Empty
2048 MB
2048 MB
6
Empty
2048 MB
2048 MB
Following are memory options available from HP:
512MB of PC2100 ECC DDR DIMM Memory Kit (2x256MB)
300678-B21
1024MB of PC2100 ECC DDR DIMM Memory Kit (2x512MB)
300679-B21
2048MB of PC2100 ECC DDR DIMM Memory Kit (2x1024MB)
300680-B21
4096MB of PC2100 ECC DDR DIMM Memory Kit (2x2048MB)
300682-B21
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 27
QuickSpecs
HP ProLiant BL40p Server Blade
Technical Specifications
HP ProLiant BL p-Class
Server Blade Enclosure
Dimensions
Height
10.5 in (26.67 cm)
Width
17.60 in (44.70 cm)
Depth
28.86 in (73.30 cm)
Rated input voltage
-43 VDC to -53 VDC Nominal -48 VDC
Rated input current
62.5 A at -48 VDC
Rated input Power
3000 W
Rated input voltage
-43 VDC to -53 VDC Nominal -48 VDC
Rated input current
6.25 A at -48 VDC
Rated input Power
300 W
Operating
50° to 95° F (10° to 35° C)
Non-Operating
-22° to 140° F (-30° to 60° C)
Relative humidity
(non-condensing)
Operating
20% to 80%
Non-Operating
5% to 95%
Wet bulb temperature
Operating
82.4° F (28° C)
Non-Operating
101.7° F (38.7° C)
Input Specifications
Individual server blade
bay ratings
Temperature range
NOTE: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Upper
operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or
30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude
maximum for storage is 70 KPa.
Operating and
Dimensions
Performance
Specifications for ProLiant
BL40p Server Blade
Weight (maximum)
Temperature range
Height
1.69 in (4.29 cm)
Width
10.29 in (26.14 cm)
Depth
28.00 in (71.12 cm)
18.0 lb (8.17 kg)
Operating
50° to 95° F (10° to 35° C)
Non-operating
Relative humidity
(non-condensing)
Maximum wet bulb
temperature
Shipping
-40° to 140° F (-40° to 60° C)
Storage
-4° to 140° F (-20° to 60° C)
Operating
10% to 90%
Non-operating
Shipping
10% to 90%
Storage
10% to 95%
82° F (28° C)
NOTE: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Upper
operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or
30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude
maximum for storage is 70 KPa.
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 28
QuickSpecs
HP ProLiant BL40p Server Blade
Technical Specifications
Operating and
Performance
Specifications for RJ-45
Patch Panel 2 with Fibre
Channel pass through
Dimensions
Height
10.405 in (26.43 cm)
Width
1.535 in (3.899 cm)
Depth
27.697 in (70.35 cm)
Capability
IEEE 802.2, 802.3, 802.3u
Network Transfer Rate
10 Base-T (half-duplex)
10 Mbps
10 Base-T (full-duplex)
20 Mbps
100 Base-TX (half-duplex)
100 Mbps
100 Base-TX (full-duplex)
200 Mbps
1000 Base-TX (full-duplex)
1000 Mbps
Network
RJ-45 in the back
Fibre Channel SAN
Pluggable SFP optical slot in the front
10 Base-TX
Categories 3, 4, or 5 UTP (2 or 4 pair); up to 328 ft
(100 m)
100 Base-TX
Category 5 UTP (2 pair); up to 328 ft (100 m)
1000 Base-TX
Category 5E (4 pair); up to 328 ft (100 m)
Connector
Cable Support
Power requirements
200 mA at + 5V DC; 500 mA at -48V
Temperature range
Operating
50° to 95° F (10° to 35° C)
Non-operating
-22° to 140° F (-30° to 60° C)
Relative humidity
(non-condensing)
Operating
20% to 80%
Non-operating
5% to 95%
Wet bulb temperature
Operating
82.4° F (28° C)
Non-operating
101.7° F (38.7° C)
NOTE: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Upper
operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or
30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude
maximum for storage is 70 KPa.
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 29
QuickSpecs
HP ProLiant BL40p Server Blade
Technical Specifications
Operating and
Performance
Specifications for RJ-45
Patch Panel
Dimensions
Height
10.405 in (26.43 cm)
Width
1.535 in (3.899 cm)
Depth
27.697 in (70.35 cm)
Capability
IEEE 802.2, 802.3, 802.3u
Network Transfer Rate
10 Base-T (half-duplex)
10 Mbps
10 Base-T (full-duplex)
20 Mbps
100 Base-TX (half-duplex)
100 Mbps
100 Base-TX (full-duplex)
200 Mbps
1000 Base-TX (full-duplex)
1000 Mbps
Connector
RJ-45
Cable Support
10 Base-TX
Categories 3, 4, or 5 UTP (2 or 4 pair); up to 328 ft
(100 m)
100 Base-TX
Category 5 UTP (2 pair); up to 328 ft (100 m)
1000 Base-TX
Category 5E (4 pair); up to 328 ft (100 m)
Power requirements
200 mA at + 5V DC; 500 mA at -48V
Temperature range
Operating
50° to 95° F (10° to 35° C)
Non-operating
-22° to 140° F (-30° to 60° C)
Relative humidity
(non-condensing)
Operating
20% to 80%
Non-operating
5% to 95%
Wet bulb temperature
Operating
82.4° F (28° C)
Non-operating
101.7° F (38.7° C)
NOTE: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Upper
operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or
30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude
maximum for storage is 70 KPa.
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 30
QuickSpecs
HP ProLiant BL40p Server Blade
Technical Specifications
Operating and
Performance
Specifications for GbE2
Interconnect Switch
Dimensions
Height
10.405 in (26.43 cm)
Width
1.535 in (3.899 cm)
Depth
27.697 in (70.35 cm)
Weight
12.0 lb/5.4 kg per interconnect switch
Performance
24 Gbps External port bandwidth per server blade enclosure (full duplex)
Forwarding rate 1.5 million pps per gigabit port (64-byte packets)
Auto-MDI/MDIX, auto-negotiation and auto-sensing with full-duplex support
Forwarding Mode
Store and forward
MAC Addresses
2,048 per interconnect switch
Forwarding table age time Maximum age: 1 to 65535 seconds; default: 300 seconds
Memory
128MB Main, 32MB flash and 2MB packet buffer per interconnect switch
Compliance
IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.3z (F-GbE2 only), 802.1D, 802.1s, 802.3ac,
802.3ad (Static), and 802.1Q
SNMP v1 (RFC 1157), MIB-II (RFC 1213), Bridge MIB (RFC 1493), Interface Group MIB
(RFC 2863), Ethernet MIB (RFC 1643), 802.1Q Extended Bridge MIB , Entity MIB (RFC
2037), RADIUS Authentication MIB, 802.3-2002 MIB, SNMP Trap Convention (RFC
1215), Bridge Trap (RFC 1493), Remote Monitoring Traps (RFC 1757) and HP Enterprise
Switch MIBs and Environmental Traps
RADIUS (RFC 2138), Telnet (RFC 854), TFTP client (RFC 783), SSH v1.5, SCP v1.5, NTP
v2 (RFC 1119), BOOTP client (RFC 2132), and XModem
Network Transfer Rate
10 Base-T (half-duplex)
10 Mbps
10 Base-T (full-duplex)
20 Mbps
100 Base-TX (half-duplex)
100 Mbps
100 Base-TX (full-duplex)
200 Mbps
1000 Base-TX (half-duplex)
1000 Mbps
1000 Base-TX (full-duplex)
2000 Mbps
1000 Base-SX (full-duplex)
2000 Mbps
Connector
12 RJ-45, 2 DB-9 (C-GbE2 Interconnect Kit)
8 LC fiber, 4 RJ-45, 2DB-9 (F-GbE2 Interconnect Kit)
EMI
FCC Class A
ICES-003 Class A
AS/NZS 3548 Class A
VCCI Class A
Safety
UL/CUL Listed Accessory
CE
Power Requirements
-48VDC: 2040 mA, 98 W maximum (per interconnect switch without GbE2 Storage
Connectivity Kit)
-48VDC: 2355 mA, 113 W maximum (per interconnect switch with GbE2 Storage
Connectivity Kit)
Temperature Range
Operating
50° to 95° F (10° to 35° C)
Non-operating
-22° to 140° F (30° to 60° C)
Relative humidity
(non-condensing)
Operating
20% to 80%
Non-operating
5% to 95%
Wet Bulb Temperature
Operating
82.4° F (28° C)
Non-operating
101.7° F (38.7° C)
NOTE: Operating temperature has an altitude derating of 34° F/1° C per 1,000 ft/304.8 m. No direct sunlight. Upper
operating limit is 10,000 ft/3,048 m or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft/9,144 m or 30.3 KPa/4.4
psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F/45° C. Altitude maximum for
storage is 70 KPa.
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 31
QuickSpecs
HP ProLiant BL40p Server Blade
Technical Specifications
Operating and
Performance
Specifications for GbE
Interconnect Switch
Dimensions
Height
10.41 in (26.43 cm)
Width
1.54 in (3.9 cm)
Depth
27.7 in (70.35 cm)
Weight
11.5 lb/5.2 kg per interconnect switch
Performance
9.6 Gbps external port bandwidth per server blade enclosure (full duplex)
Forwarding rate 0.15 million pps per 10/100 port, 1.5 million pps per gigabit port, (64byte packets)
Non-blocking, full-wire speed for all connections
Auto-MDI/MDIX, auto-negotiation and auto-sensing with full-duplex support
Forwarding Mode
Store and forward
MAC Addresses
8,191 per interconnect switch; MAC address based filtering and MAC address packet
priority configuring
Forwarding table age time Maximum age: 1 to 1,000,000 seconds; default: 300 seconds
Memory
32MB Main, 6MB flash and 16MB packet buffer per interconnect switch
Compliance
IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.1D, 802.1p, 802.3ac, 802.3ad (Static),
802.1Q, and 802.3x
SNMP v1 (RFC 1157) and RMON v1 (RFC 1757) groups 1, 2, 3, and 9
MIB-II (RFC 1213), Bridge MIB (RFC 1493), Interface Group MIB (RFC 2863), Ethernet
MIB (RFC 1643), 802.1Q Extended Bridge MIB (RFC 2674), Entity MIB (RFC 2037),
SNMP Trap Convention (RFC 1215), Bridge Trap (RFC 1493), Remote Monitoring Traps
(RFC 1757), and HP Enterprise Switch MIBs and Environmental Traps
IGMP v1 (RFC 1112), IGMP v2 (RFC 2236), SNTP (RFC 1361), Telnet (RFC 854), TFTP
client (RFC 783), BOOTO client, (RFC 2132), DHCP client, (RFC 2131) and ZModem
Network transfer rate
10 Base-T (half-duplex)
10 Mbps
10 Base-T (full-duplex)
20 Mbps
100 Base-TX (half-duplex)
100 Mbps
100 Base-TX (full-duplex)
200 Mbps
1000 Base-TX (half-duplex)
1000 Mbps
1000 Base-TX (full-duplex)
2000 Mbps
1000 Base-SX (full-duplex)
2000 Mbps
Connector
12 RJ-45, 2 DB-9 (C-GbE Interconnect Kit)
4 LC fiber, 8 RJ-45, 2 DB-9 (F-GbE Interconnect Kit)
EMI
FCC Class A
ICES-003 Class A
AS/NZS 3548 Class A
VCCI Class A
Safety
UL/CUL Listed Accessory
CE
Power Requirements
48V: 1050 mA, 50 W maximum (per interconnect switch)
Temperature Range
Operating
50° to 95° F (10° to 35° C)
Non-operating
-22° to 140° F (-30° to 60° C)
Relative humidity
(non-condensing)
Operating
20% to 80%
Non-operating
5% to 95%
Wet bulb temperature
Operating
82.4° F (28° C)
Non-operating
101.7° F (38.7° C)
NOTE: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Upper
operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or
30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude
maximum for storage is 70 KPa.
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 32
QuickSpecs
HP ProLiant BL40p Server Blade
Technical Specifications
Operating and
Performance
Specifications for Power
Enclosures (North
America/Japan)
Dimensions
Weights
Input requirements
Output voltage
specifications
Single-Phase Model
Three-Phase Model
Height
5.25 in (13.34 cm)
5.25 in (13.34 cm)
Width
27.15 in (68.96 cm)
27.15 in (68.96 cm)
Depth
17.60 in (44.7 cm)
17.60 in (44.7 cm)
No hot-plug power supplies
47.5 lb (21.55 kg)
47.5 lb (21.55 kg)
All hot-plug power supplies
99.5 lb (45.13 kg)
125.5 lb (56.93 kg)
Rated input voltage
200 VAC to 240 VAC
200 VAC to 240 VAC line
to line
Rated input frequency
50 Hz to 60 Hz
50 Hz to 60 Hz
Rated input current per side
24A
24A per phase
Rated input power per side
5760 W
9976 W
Power cord
1 NEMA L6-30P per side
1 NEMA L15-30 per side
Rated output voltage
-48.8 VDC to –54 VDC
-48.8 VDC to –54 VDC
Rated output current
99A
170A
Rated output power
4298 W
8310 W
Nominal power
4158 W at 208 VAC
7202 W at 208 VAC
Ambient temperature
range
(See NOTE)
Operating
50° to 95° F
(10° to 35° C)
50° to 95° F
(10° to 35° C)
Shipping
-22° to 140° F
(-30° to 60° C)
-22° to 140° F
(-30° to 60° C)
Relative humidity,
non-condensing
(See NOTE)
Operating
20% to 80%
20% to 80%
Non-operating
5% to 95%
5% to 95%
Wet bulb temperature
Operating
82.4° F (28° C)
82.4° F (28° C)
Non-operating
101.7° F (38.7° C)
101.7° F (38.7° C)
NOTE: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Upper
operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or
30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude
maximum for storage is 70 KPa.
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 33
QuickSpecs
HP ProLiant BL40p Server Blade
Technical Specifications
Operating and
Performance
Specifications for Power
Enclosures (International)
Single-Phase Model
Three-Phase Model
Height
5.25 in (13.34 cm)
5.25 in (13.34 cm)
Width
27.15 in (68.96 cm)
27.15 in (68.96 cm)
Depth
17.60 in (44.7 cm)
17.60 in (44.7 cm)
No hot-plug power supplies
47.5 lb (21.55 kg)
47.5 lb (21.55 kg)
All hot-plug power supplies
99.5 lb (45.13 kg)
125.5 lb (56.93 kg)
Rated input voltage
200 VAC to 240 VAC
200 VAC to 240 VAC line
to line
Rated input frequency
50 Hz to 60 Hz
50 Hz to 60 Hz
Rated input current per side
24A
24A per phase
Rated input power per side
5760 W
10,552 W
Power cord
1 IEC 309 3-pin, 32A per
side
1 IEC 309 5-pin, 32A per
side
Rated output voltage
-48.8 VDC to –54 VDC
-48.8 VDC to –54 VDC
Rated output current
99A
180A
Rated output power
4798 W
8790 W
Nominal power
4598 W at 208 VAC
8790 W at 208 VAC
Operating
50° to 95° F
(10° to 35° C)
50° to 95° F
(10° to 35° C)
Shipping
-22° to 140° F
(-30° to 60° C)
-22° to 140° F
(-30° to 60° C)
Relative humidity,
non-condensing
(See NOTE)
Operating
20% to 80%
20% to 80%
Non-operating
5% to 95%
5% to 95%
Wet bulb temperature
Operating
82.4° F (28° C)
82.4° F (28° C)
Non-operating
101.7° F (38.7° C)
101.7° F (38.7° C)
Dimensions
Weights
Input requirements
Output voltage
specifications
Ambient temperature
range (See NOTE)
NOTE: Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No direct sunlight. Upper
operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or
30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude
maximum for storage is 70 KPa.
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 34
QuickSpecs
HP ProLiant BL40p Server Blade
Technical Specifications
Operating and
Performance
Specifications for Power
Distribution Devices
Power Bus Box
Mini Bus Bar
Scalable Bus Bar
Power enclosures or
facility DC feeds
supported (3U each)
1
1
2
Server blade enclosures
supported (6U each)
1
3
5
9U
21U
36U
Total rack height of
supported enclosures
Dimensions
Height
5.1 in (12.95 cm)
19.45 in (49.40 cm)
48.57 in (123.37 cm)
Width
3.6 in (9.14 cm) each
19.74 in (50.14 cm)
19.74 in (50.14 cm)
Depth
3.25 in (8.26 cm)
2.2 in (5.59 cm)
2.2 in (5.59 cm)
Weight
3.62 lb (1.64 kg)
13.2 lb (5.9 kg)
26 lb (11.79 kg)
Rated operating voltage
-43.2 VDC to -54 VDC
-43.2 VDC to -54 VDC
-43.2 VDC to -54 VDC
Max total power
supported
3000 W
9000 W
15,000 W
Total max input current at 69.44 A at -43.2VDC
minimum voltage
208.32 A at -43.2 VDC
347.2 A at -43.2 VDC
(equivalent of 175A per
feed)
Total max input current at 62.5 A at -48VDC
nominal voltage
187.5 A at -48 VDC
312.5 A at -48 VDC
(equivalent of 175A per
feed)
Max current per power
feed
Max local ambient
temperature
70A
210A
210A
149° F (65° C)
149° F (65° C)
149° F (65° C)
NOTE: All systems support redundant A & B feeds. Scalable bus bar supports dual A and dual B feeds.
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 35
QuickSpecs
HP ProLiant BL40p Server Blade
Technical Specifications
Operating and
Performance
Specifications for Facility
DC
Voltage
Current
Nominal input voltage
-48 VDC
Operating voltage range
-48VDC ± 10% or -43.2 VDC to -52.8 VDC
Max Input voltage slew rate
0.5V/uS
Redundant feed voltages*
(A & B)
*A and B feeds must differ by no more than 5VDC
during steady state operation
Ripple/Noise
480 mV PARD**
Overshoot
Must remain within regulation limits on all feeds during
startup or shutdown
Voltage transients
Must not exceed -60 VDC
Max steady state input
current
62.5A per server blade enclosure installed at -48VDC
Max steady state current per
feed/total
Power bus boxes
70 A/70A
Mini bus bars
210 A/210A
Scalable bus bars
210 A/350A or equivalent of 175A per feed*
In-rush current
Must support up to 2X the maximum operating current per server blade enclosure
(125 A) for up to 1.0 mS
Input over-current
Customer provided fusing for facility DC feeds that protects the system from
catastrophic over-current within 20 uS. Fuse should sustain all in-rush and operating
currents.
Max Input Current Slew
Rate
1A/uS
Max Rated Power
3000W per server blade enclosure
Connections and Cables
HP provided facility DC cable connection kit:
The facility DC connection kit supports the connection of up to four -48VDC,
RETURN pairs and ground.
The power cable assemblies consist of 1/0AWG, color-coded, flexible cable rated at
105° C, terminated with bus mating connectors at one end and unterminated at the
other end. The cable length provided enables the customer to route to a fuse panel
within or adjacent to the rack.
NOTE: *All systems support redundant A and B feeds. Scalable bus bars support dual A and dual B feeds.
** Periodic and random noise (PARD). Maximum allowable peak-to-peak ripple and noise (as measured at the load on
any output channel). The ripple and noise is measured over a 20 Hz to 100 MHz frequency band. A resistive load
(non-electronic) is used for this measurement. Each output is by-passed to return by a 10uF tantalum capacitor with
an ESR less than 100 milli-Ohms in parallel with a 0.47 uF ceramic capacitor, at the point of load. The load cable is 12
feet of twisted wire capable of carrying the current. The printed wiring board assembly is installed in its enclosure
for this measurement, or the measurement leads are properly shielded with Earth grounds applied to the insert.
© Copyright 2004 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel Corporation.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions
contained herein.
DA - 11562 Worldwide — Version 24 — September 24, 2004
Page 36