Instrument reprocessing in surgeries,
outpatient clinics and hospitals
Washing, disinfection, documentation,
guarantees
A systematic approach to the safe
and efficient reprocessing of instruments
Miele offers a comprehensive system for
safe and efficient processes in surgeries,
outpatient clinics and hospitals.
System4Med covers all aspects of modern
instrument reprocessing and is the product
of decades of experience.
Washer-disinfectors for safe and
economical cleaning and disinfection. New,
intelligent software solutions ensure gapfree process documentation. And blanket
coverage by Miele Service guarantees a
rapid service response in top Miele quality.
Miele's System4Med brings everything
together – components, machines,
accessories and documentation – perfectly
matched and from one single source.
Leading instrument manufacturers
recommend Miele reprocessing
systems:
Miele ORTHOVARIO approved for the reprocessing of
current-series Aesculap motor systems.
Recommendation to reprocess ophthalmological instruments
with the Miele system.
Miele OXIVARIO PLUS process approved to prevent the
iatrogenic spread of vCJD
Value-preserving reprocessing of instruments with the VARIO
TD and OXIVARIO processes
Safe reprocessing of flexible endoscopes in models ETD3
and mini ETD2 which are designed and manufactured by
Miele.
2
Manual reprocessing entails a multitude
of risks
The manual cleaning and disinfection of
medical instruments requires considerable
time and effort. It also represents a source
of errors with respect to maintaining
exposure times, dispenser concentrations
and the renewal of disinfectant solutions.
Many instruments – such as long lumened
items – can scarcely be reprocessed
by hand. On the economical side,
high consumption of water as well as
detergents and disinfectants result in
excessive costs.
Benefits of automatic reprocessing
compared with manual cleaning:
• More thorough cleaning as pre-condition
for effective sterilisation
• Simple cleaning of lumens on minimally
invasive instruments
• Gentle treatment of materials and
preservation of the value of expensive
instruments
• Lower cycle costs through the reduced
use of water, electricity and process
chemicals
• Safe results guaranteed by automatically
monitoring programme parameters
• Automatic instrument reprocessing
preferred method according to Robert
Koch Institute
• Safest approach to instrument
reprocessing, offering maximum
compliance with regulations
3
Illustrated: – PG 8535 washer-disinfector – E 501 AN carriage – E 502 AN module
– on top of machine: E 505 AN module
3
A systematic approach to the safe
and efficient reprocessing of instruments
4
4
5
G7862 Utensil Washer
Made in Germany
Uncompromising quality and great
power of innovation - Made in Germany are two of the big benefits Miele has to
offer. Miele washer-disinfectors excel not
only in terms of the way they seamlessly
integrate into well-conceived systems
but also - and particularly - through their
capacity and their top-grade build quality
and workmanship.
G 7862 washer-disinfector
• Undercounter/freestanding unit
• Stainless-steel casing
• Width 60 cm
H 820* (850), W 600, D 600 mm
• 2 rack levels
• Water circulation capacity: 400 l/min
• 8 programmes
• 3-phase supply for short programme
cycles
• 2 door dispensers for process chemicals
(alkaline detergent/neutralising agent)
Hygiene, safety and efficiency
• Automatic instrument reprocessing and
utensils
• Thermal disinfection processes
• Thorough cleaning and safe disinfection
in a closed, single-cabinet system
• Certified medical product,
MDD compliant
• Reproducible results, validatable
processes
• Process documentation interface
(depending on model)
• Comprehensive safety features according
to EN ISO 15883 / AS4187 and AS2945
• Connection option for liquid dispensing
systems
Exclusive to Miele
• Tried-and-tested Miele quality, tested to
last 15,000 programme cycles
• Large-capacity cabinet with two rack
levels
• Powerful circulation pumps with a
capacity of up to 400 l/min for superior
cleaning performance
• Large selection of standard and
special inserts for reprocessing
the full range of instruments and utensils
* Undercounter unit
6
Technical data Pages 50/51
Miele washer-disinfectors:
Quality, inside and out
High-quality design
In designing these machines, Miele used
choice, durable and robust materials.
This results in rugged and particularly
maintenance-free machines able to cope
with the rough and tumble of everyday
working life.
• Double-skinned design, insulated door
for excellent soundproofing
• Chamber and pipework made from highgrade stainless steel
• Fibre-reinforced hoses
Cleaning technology
• Hygienic freshwater system with fresh
water intake in each programme stage
• 2 spray arms (third spray arm on
upper basket) for thorough cleaning of
instrument surfaces
• Perfect arrangement of nozzles and
regulatable spray arm speed
• Injector system for thorough cleaning of
lumens
• Direct docking of mobile units and
baskets to water circuit
Standard technical specifications
• Profi Monobloc water softener,
reactivation internalised into programme
cycle, low salt consumption
• Powerful circulation pump, max.
throughput 400 l/min
• 4-fold filtration system comprising
surface filter, strainer, coarse filter and
micro-fine filter
• Efficient steam condenser as heatexchanger to minimise steam discharge
• Flowmeter to monitor water intake
quantities
• Door dispenser for powder cleaning
agent
• Connection options for liquid dispensing
systems
• Integrated dispenser flow control
Design
• Freestanding or undercounter unit
Interfaces
• Serial interface for process
documentation
• Optical interface for service
Safety features
• Electric door lock
• Programme recontinuation in event of
power outage
• Optical and acoustic signal at end of
programme
• 2 sensors for redundant monitoring and
control of process temperature
• Port for simple positioning of sensors in
the wash cabinet for process validation
• Safety features according to EN ISO
15883 / AS4187 and AS2945
7
Programme controls
Fully electronic controls, high-level
process security
Programmes and functions on Miele's
G 7862 washer-disinfectors are controlled
and monitored by Multi NOVOTRONIC
controls. All Miele washer-disinfectors
feature a serial interface. This offers the
opportunity to document the entire process
using a printer.
High-level user convenience
All symbols on the fascia panel are
self-explanatory. The machine status is
indicated at any given time via control
lamps. A 3-digit 7-segment indicator in the
display with its own toggle switch can be
used to display the remaining programme
duration or the current washing/
disinfection temperature. Status and
control indicators monitor the process and
inform of faults and the need for servicing.
8
Features and functions
G 7862 • Electronic controls
• Multi NOVOTRONIC • 7 standard washing and disinfection
programmes
• 1 vacant programme slot for customised
programme
• Programme selection via rotary selector
• Programme sequence indicator and fault
and service indicators
• Temperature and programme duration
indicator
Illustrated: G 7862
Programmes, cycle times, consumption
G7862
Washing / disinfection
Ward Utensils / Surgical Equipment
Duration
CW
WW
Energy
(mins)
(I)
(I)
(kWh)
vario TD AN
47
32.5
40
1.8
vario TD
35
21.5
23.5
1.6
SCAN III
30
21
29
1.4
SCAN II
25
11
29
1.2
SCAN I
20
11
20
1.2
Universal
19
10
29
0.5
free (A)
Heating: 9.0kW (3N AC 400V 9.7kW),
Connection to cold water (15°C) and hot water 65°C)
CW = Cold water, WW = Hot water
Single phase machine - programme duration may vary
VarioTD programme
In the Vario TD programme, pre-cleaning
commences at low temperatures to
prevent the denaturation of blood residues.
After an intensive main wash phase,
thermal disinfection then takes place at
temperatures in excess of 90°C which
are maintained for 5 minutes. In order to
protect surgical instruments, the final rinse
is ideally performed with demineralised
water without any surfactant added.
This programme is suitable for routine
reprocessing according to DIN EN ISO
15883 for all thermally stable instruments.
This approach is particularly gentle on
materials and is recommended for the
reprocessing of transmission instruments.
9
Washer-disinfectors
PG 8535 and PG 8536
Illustration shows PG 8535 with lid
Compact high-tech washer-disinfector
with freely programmable controls
High-performance high-tech washerdisinfector with freely programmable
controls
PG 8535 washer-disinfector
• Undercounter/freestanding unit
• Stainless-steel casing
• Width 90 cm
• H 820* (850), W 900, D 700 mm
• Freely programmable Profitronic⁺
controls with 17 programmes and
30 vacant programme slots
• Network interface for process
documentation
• 2 rack levels
• 400 l/min circulation pump capacity
• PerfectSpeed spray arm monitoring
• 3-phase supply for short programme
cycles
• 2 integrated dispenser pumps for liquid
detergent and neutralising agent
• Drawer with 2 supply canisters, 5 l each
• Integrated hot-air drying unit
• Option: OXIVARIO package
PG 8536 washer-disinfector
• Freestanding unit
• Stainless-steel casing
• Width 90 cm
• H 1175, W 900, D 700 mm
• Freely programmable Profitronic+
controls with 18 programmes and
30 vacant programme slots
• Network interface for process
documentation
• 2 rack levels
• High-performance units with 600 l/min
circulation capacity
• PerfectSpeed spray arm monitoring
• 3-phase supply for short programme
cycles
• 2 integrated, maintenance-free
bellows-type dispenser pumps
for liquid detergent and neutralising agent
• Drawer with 4 x 5 l supply containers,
incl. PerfectFlow Sensor ultrasound flow
control
• Integrated hot-air drying unit
Capacity per cycle:
• 2 AN sets or 4 DIN mesh trays or
1–2 MIS sets or 48 GYN specula
10
• Options:
PerfectFlow Sensor ultrasound flow
control ORTHOVARIO package
Capacity per cycle:
• 3 AN sets or 7 DIN mesh trays or
2 MIS sets or 48 GYN specula
* Undercounter unit
Technical data Pages 52/53
• Optimum user convenience
• Reliable hygiene
• Perfect control
• Freely programmable controls
• Chemical-resistant glass surfaces
• Innovative programme cycles
PerfectTouch Control
Simple to operate, easy to clean: Washerdisinfectors from the PG 85 series feature
a touch-sensitive display. This easy-to-use
PerfectTouch display guarantees unique
user convenience combined with superb
hygiene. A fully flush, chemical-proof
display screen makes for simple and
effective wipe disinfection.
The controls are outlined on the glass
surface and slight pressure is enough to
activate functions and launch programmes,
even when wearing protective gloves. The
man-machine interface involves the use
of only a very limited number of controls;
all steps in the process appear in the
display in the user's own language. Display
texts, for example for A0 values, actual
temperatures, conductivity, countdown
times and all other protocol data can be
defined individually. Using the integrated
A0 value controls, parameters can be set
to comply with national standards or to suit
a hospital's own regime.
Features and functions
• Freely programmable controls
PROFITRONIC+
• 64 programme slots
• 18 standard programmes, 15 service
programmes
• 30 vacant programme slots
• User interface with local-language display
• Configurable display and protocols
• 4 operating levels ranging from
simple operative to power user
• Countdown indicator and delay start
function
• Wide range of programming options, e.g.
for client-specific programmes assigned
to vacant programme slots
• Automatic mobile unit recognition for
automatic programme selection
11
• Continuous conductivity monitoring
• Residue-free rinse quality
• Safe reprocessing
• Maintenance-free conductivity monitoring
12
PerfectPure Sensor
Residue in the final rinse water can
have a negative impact on reprocessing
performance, sometimes even with
catastrophic implications. Alkaline
residue in ophthalmology, for instance,
can in extreme cases result in serious
complications when instruments are
reused. Excessive residue can also result
in corrosion and deposits on instruments.
Hence, there is great call for a system
able to warn users of the presence of
undesirable substances in the wash liquor
in reprocessing systems. On request, the
PG 8536 can be fitted with Miele's new,
patented PerfectPure conductivity monitor.
Conductivity monitoring reliably detects
the presence of minerals in the rinse water,
such as the dissolved salts introduced
with alkaline or acidic process chemicals,
limiting them to a threshold level defined
by the user.
Residue is determined as a function of
conductivity. Measuring and monitoring is
achieved using a contact-free and hence
maintenance-free system which is able
to monitor conductivity conditions with
exceptionally low tolerance levels in ranges
from 5 – 40 μS/cm.
Depending on machine settings,
conductivity readings can even be used to
control the programme cycle. This allows
the number of necessary rinse cycles to
be determined automatically if conductivity
is outside the predetermined range:
Recording conductivity over the entire
process helps ensure the reproducibility
of validated processes. Monitoring
results can be shown in the display and
documented accordingly.
Conductivity monitoring using Miele's
PerfectPure sensor technology reliably
ensures that the maximum residue
concentrations on surgical instruments
stated by chemistry suppliers are not
exceeded. This, in turn, ensures that
residuals on instruments do not pose
any risk to patients in the operating
theatre. Alongside toxicological safety
considerations, the reduced depreciation
of instruments is also a key benefit to
users. Recording conductivity over the
entire process offers increased safety in
ensuring the precise reproducibility of
validated processes.
• Continuous monitoring of dispensed
volumes
• Precise results, user-defined
tolerances
• Perfect dispensing control
• Extremely precise
• Precision independent of temperature
and viscosity of dispensed products
PerfectFlow
A decisive factor contributing to good
reprocessing results is the precise
volumetric control of dispensed chemicals.
The currently valid DIN EN ISO 15883
standard prescribes the redundant
monitoring of dispensing. Miele's new
PerfectFlow sensor using ultrasound
technology, a standard feature on the
PG 8536, offers considerably greater
safety margins than conventional systems.
The PerfectFlow sensor guarantees a
hitherto unparallelled degree of precision
in controlling and monitoring volumetric
flow, independent of viscosity and ambient
temperatures. The monitoring system
• Precisely monitored reprocessing
• Improved reproducibility of validated
processes
• Perfect washing and disinfection
results
• Spray arm monitoring on all levels
• Spray arm speed monitoring
PerfectSpeed Sensor
To guarantee perfect and safe cleaning and
disinfection results, the rotational speed
of the spray arms must be within defined
limits. With the new PerfectSpeed sensor,
the precise speed of each individual
spray arm is carefully monitored and
documented – whether in the cabinet or
on board baskets and mobile units. The
spray arm monitoring feature uses a sensor
strip located outside the cabinet to detect
the passage of spray arms and to ensure
that speeds are within the specified range.
Information shown in the display indicates
whether the values are correct or whether
the user must intervene on account, for
example, of excessive foam slowing spray
arm motion down.
is fully independent of the dispensing
system and can be calibrated. Dispensing
tolerances can be set to comply with
legal standards or defined individually;
chemicals are dispensed efficiently
and reliably, irrespective of the type of
product or ambient conditions (continuous
operation, fluctuating climatic conditions).
Any deviation from the target quantities are
safely detected and the reproducibility of
validated processes guaranteed. An error
message is issued or the programme is
aborted if values are outside the tolerance
range.
In the event of a deviation from target
values, either an error message is issued or
the programme is interrupted immediately
to allow the user to deal with the cause
of the fault, depending on system
parameters.
Deviations can also be recorded by
automatic process documentation. Spray
arm sensing, a standard feature on models
PG 8535 and PG 8536, offers effective
protection against spray arm blockages
by items in the load and also provides
information on pressure conditions in the
machine and in mobile units and baskets.
And, most importantly, spin speeds
provide a valuable indication as to the
reproducibility of validated processes,
increasing safety margins in machinebased instrument reprocessing systems by
a considerable degree.
13
• Optimum drying results
• High level of air purity in chamber
• High standards of hygiene
PerfectHEPA Drying
New hygiene standards and the use of
innovative Miele technology also applies to
the drying phase. The new Class
H 13 high-temperature HEPA filter, located
directly upstream from the cabinet,
prevents the admission of unwanted airborne particles from room air. This ensures
exceedingly high levels of air purity in the
cabinet. Thanks to streamlined air ducting,
Perfect HEPA Drying also ensures excellent
drying performance.
• Continuous process documentation
• Integration into surgery or hospital
network
• Wide range of parameters documented
• Perfect process traceability
• Wide range of parameters including
temperature, A0 value, dispenser
volumes, conductivity and spray arm
rotation
14
PerfectDoc
The PG 8535/36 is fitted with a network
interface for process documentation as a
standard feature. The PerfectDoc module
allows the machine to interface with
process documentation software. This
facilitates the recording of many process
parameters, including temperatures,
as well as the documentation of entire
process protocols including A0 values,
dispensed quantities, spray arms speeds
and conductivity readings. Alternatively,
documentation can also be achieved using
a printer connected to one of the machine's
serial interfaces. Further information on
process documentation is provided on
Pages 56-59.
Innovative programme cycles
1994
2004
2005
2011
Miele innovations for particularly critical
cases. Milestones in the optimisation of
cleaning results:
1994 innovation
VarioTD
The Vario TD method can now be seen
as the standard programme for routine
instrument cleaning and disinfection,
achieving good removal of protein-based
contamination (blood, secretion) from
instruments which do not pose a particular
challenge. Thermal disinfection takes
place at a temperature of at least 90°C
for 5 minutes. To protect instruments,
the final rinse is ideally performed with
demineralised water without surfactant.
• Intensive cleaning below protein
denaturation temperature
• Disinfection according to EN ISO 15883
• Exceptional material compatibility
* Programme selection may vary from
country to country
2004 innovation
OXIVARIO
Special programme on PG 8535 and
PG 8536 washer-disinfectors for the critical
instruments used in trauma surgery as well
as high-frequency cauterising instruments
requiring higher standards of cleaning.
• Excellent cleaning and removal of organic
soil
• Time-saving as there is no need for preand post-treatment
OXIVARIO PLUS
Special programme on PG 8535 and PG
8536 washer-disinfectors to prevent the
iatrogenic spread of vCJD according to
guidelines published by the task force set
up by Germany's Robert Koch Institute.
• Excellent cleaning and removal of organic
soil
• Time-saving as there is no need for preand post-treatment 2005 innovation
ORTHOVARIO
Special programme on PG 8536 washerdisinfectors for orthopaedic instruments
including motor systems and other medical
products made from aluminium.
• Excellent cleaning performance
• Good material compatibility even on
instruments sensitive to alkalinity
2011 innovation
ROBOTVARIO *
The complexity of the robotic-assisted
instruments used in minimally invasive
surgery poses extreme challenges with
respect to the safety and reliability of
reprocessing. The new ROBOTVARIO
reprocessing system from Miele
Professional consists of a specially
designed load carrier, a new reprocessing
programme and matching process
chemicals. The outcome is an innovative
approach to the safe and cost-efficient
cleaning and disinfection of roboticassisted surgical instruments.
• Excellent cleaning performance
• Economical and gentle
reprocessing of expensive instruments
15
Programmes, cycle times, consumption
PG 8536
DES-VAR-TD
Cleaning
Drying
Duration
CW
HW
AD
Energy
Duration
[mins.]
[l]
[l]
[l]
[kWh]
[mins.]
[kWh]
54
36.3
24.2
16
3.7
34.3
0.6
DES-VAR-TD AN
57
43
39.5
22
3.7
49.5
0.8
VAR-TD-NR
44
24.3
23.3
16
3.3
34.3
0.5
OPHTHALMOLOGY
48
26.3
36.7
32
2.9
34.3
0.5
ORTHOVARIO
74
34.7
31.3
35
5
34.3
0.4
OXIVARIO
64
38.3
40.7
32
4.4
34.3
0.5
OXIVARIO PLUS
73
27
35
49
4.5
43.3
0.5
SHOE-TD-75/2
27
27.7
35.8
–
1.5
39.3
0.4
SPECIAL 93/10
48
22
25.5
15.5
3.9
39.3
0.7
CHEM-DESIN
38
26.3
51.7
–
1.8
40.5
0.4
LAB-STANDARD
33
8.5
38.5
18
2.6
34.3
0.6
LAB-UNIVERSAL
35
8.5
55
21
2.3
34.3
0.6
LAB-INTENSIVE
43
8.5
40
48
2.7
34.3
0.6
LAB-PIPETTES
46
11.5
74.5
44
2.5
34.3
0.3
PLASTICS
38
62.5
–
20
2.5
44.6
0.4
ORGANICA
41
1
64
21
2.8
34.3
0.6
ANORGANICA
43
4
49
48
2.4
34.3
0.6
LAB-OIL
47
1
80.5
21
2.5
34.3
0.3
Heating: 9 kW (3N AC 400 V, 10.2 kW)
Connection to cold water (15°C), hot water (65°C) and demineralised water (15°C)
Note:
With the exception of OrthoVario, the PG 8535 has the same programmes as the PG 8536.
Cycle times and consumption figures may vary slightly.
OPHTHALMOLOGY programme
Miele PG 8535 and PG 8536 washerdisinfectors now feature a programme
which is specifically designed to cater for
the instruments used in ophthalmological
surgery. By using fully demineralised
water in the final rinse, chemical residue is
reduced to a minimum. This is particularly
important as even the slightest traces of
process chemicals can result in severe
complications, e.g. caustic burns to the
eye. In order to precisely monitor chemical
residue in each stage of the programme,
the use of a PG 8536 with an integrated
conductivity meter is highly recommended
(cf. Page 12 for further details on
conductivity).
Leading instrument manufacturers
recommend Miele reprocessing
systems:
Miele ORTHOVARIO approved for the reprocessing of
current-series Aesculap motor systems.
Recommendation to reprocess ophthalmological instruments
with the Miele system.
Miele OXIVARIO PLUS process approved to prevent the
iatrogenic spread of vCJD
Value-preserving reprocessing of instruments with the VARIO
TD and OXIVARIO processes
Safe reprocessing of flexible endoscopes in models ETD3
and mini ETD2 which are designed and manufactured by
Miele.
16
Energy
Upper and lower baskets
for washer-disinfectors
G 7862, PG 8535, PG 8536
O 188/2 upper basket/open front
• Open front
• For various inserts
• Vertical clearance 165 +/- 20 mm
• Built-in spray arm with magnetic tip
• Note: Magnet for spray arm sensors on
PG8535, PG8536
• H 215, W 531, D 475 mm
O 190/2 upper basket/open front
• Open front
• For various inserts
• Vertical clearance 215 +/- 20 mm
• Built-in spray arm with magnetic tip
• Note: Magnet for spray arm sensors on
PG8535, PG8536
• H 265, W 531, D 475 mm
O 191/1 upper basket/open front
• Open front
• For mesh tray (E 142)
• Vertical clearance 115 +/-20 mm
• Loading width 475 mm
• Loading depth 450 mm
• Built-in spray arm above basket
• H 180 +/–20 mm
W 531, D 475 mm
U 874/1 lower basket/open front
• For various inserts
• Vertical clearances in combination with
upper basket:
O 176 approx. 110 mm
O 177/1 approx. 220 mm – 20/– 40 mm
O 183 approx. 185 mm +/–20 mm
O 188/1 approx. 270 mm +/–20 mm
O 190/1 approx. 220 mm +/– 20 mm
O 191/1 approx. 295 mm
• With holder for ML/2 magnetic strip for
automatic mobile unit recognition
• H 50, W 534, D 515 mm
17
Upper baskets/injector units
for washer-disinfectors
G 7862, PG 8535, PG 8536
O 177/1 upper basket/injector unit
• Built-in spray arm
• Right-hand side free for inserts
• Left-hand side with 26 silicone adapters:
26 nozzles Ø 4 mm, L 30 mm, 7 funnels
supplied, with height-adjustable rack
• Vertical clearance
230/205 mm
• Height adjustment
range + 20/+ 40 mm
• H 263, W 498,
D 455 mm
O 176 upper basket/injector unit TA
• For instruments from minimally invasive
surgery, arthroscopy, urology
• Left-hand side free for inserts
Vertical clearance 360 mm,
10 injector nozzles
• Right-hand side for lumened instruments
max. length 500 mm
14 injector nozzles/funnels
• Connection for hot-air drying unit
Powder dispensing not possible
Powder dispensing not possible
O 176/1 upper basket/injector unit with
drying connector
• For instruments from minimally invasive
surgery, arthroscopy, urology
• 10 receptacles
• Built-in spray arm with magnetic tip
• Note: Magnet for spray arm sensors on
PG 8535, PG 8536
• Left-hand side free for inserts
• Right-hand side for lumened instruments,
max. length 500 mm
• Vertical clearance 360 mm
• Connection for hot-air drying unit
18
O 183 upper basket/injector unit
• For instruments from minimally invasive
surgery, arthroscopy, urology
• Left side free for inserts
Vertical clearance 285 +/–20 mm,
10 injector nozzles
• Right side for lumened instruments
max. length 370 +/– 30 mm,
14 injector nozzles/funnels
O 176/1 supplied as standard with:
2 x spray nozzles Ø 2.5 mm
4 x spray nozzles Ø 4 mm
4 x funnels
2 x E 442 irrigation sleeves
2 x E 448 silicone hoses
1 x E 452 injector nozzle
1 x E 453 injector nozzle
1 x E 454 injector nozzle
Surgical instruments
E 327/1 mobile unit
For use in PG 8535, PG 8536
• For 4 DIN mesh trays on 2 levels
• Built-in spray arm
• Vertical clearances from bottom:
Level 1: H 112, W 520, D 510 mm
Level 2: H 105, W 512, D 480 mm
• With holder for ML/2 magnetic strip for
automatic mobile unit recognition
• Load capacity
40 kg of instruments
E 439/3 mobile unit
For use in PG 8536
• For 7 mesh trays on 3 or 4 levels
• 2 built-in spray arms
• Level 2 from bottom removable
• Vertical clearances from bottom:
Level 1: H 70, W 488, D 499 mm
(without Level 2: H 155 mm)
Level 2: H 70, W 509, D 510 mm
Level 3: H 90, W 520, D 470 mm
Level 4: H 90, W 490, D 460 mm
• With holder for ML/2 magnetic strip for
automatic mobile unit recognition
• Load capacity
70 kg of instruments
19
Anaesthetic equipments/modular system
Modular basket concept
Miele is now offering a new and modular
mobile unit design for the reprocessing of
anaesthetic instruments and accessories.
This concept comprises a basic load
carrier and modules for anaesthetic tubing
and intubation material. Anaesthetic
equipment and accessories can be
reprocessed flexibly to meet the needs of
individual surgeries. A further E 427 for
6 laryngoscopes further complement the
system.
E 501 carriage
For use in PG 8535
• For modules E 502, E 505
• For approx. 2 AN sets in combination
with E 502
• 6 injector nozzles for breathing bags,
breathing masks
• 10 injector nozzles for intubation material
• Connection for hot-air drying unit
• With holder for ML/2 magnetic strip for
automatic mobile unit recognition
• H 502, W 535, D 515 mm
E 502 module for breathing tubes
For use in E 501
• Module for 6 breathing tubes
• 6 nozzles with spring supports
• Support for breathing tubes with
max. length of 1.5 m
• Spiral support
Scope of delivery:
• 2 x E 433 holders for 3 silicone breathing
tubes
• 1 x E 434 holder for 3 paediatric
breathing tubes
• 1 x E 432 holder for 3 corrugated
breathing tubes
20
E 505 module for intubation material
For use in E 501
• Module for intubation material
• 30 injector nozzles to connect intubation
material, e.g. laryngeal masks, Guedel
tubes or endotracheal tubes
Scope of delivery:
• 30 x E 496 injector nozzles for intubation
material, Ø 4 x 120 mm
E 501 scope of delivery
• 6 x E 466 injector nozzles for breathing
bags, 8 x 333 mm
• 10 x E 496 injector nozzles for intubation
material, Ø 4 x 120 mm
• 1 x E 431 injector nozzle for breathing
bag
• 1 x E 507 mesh basket for sundry small
items
• 8 x irrigation tubes for double-lumened
laryngeal masks, Ø 4 x 70 mm
Anaesthetic equipment
Sample combination
E 501 carriage with E 502 hose module
Sample combination
Carriage with E 505 module for intubation
material
Mobile units
for anaesthetic equipment
Model
Anaesthetics/modular system
PG 8535
E 501
E 502
E 505
E 435/3
E 461/2
PG 8536
–
–
–
E 436/3
E 461/2
E 435/3 mobile injector unit TA
For use in PG 8535
• For approx. 2 AN sets
• 6 nozzles with spring supports for
breathing tubes with max. length of 1.5 m
• Spiral support
• Connection for hot-air drying unit
• With holder for ML/2 magnetic strip for
automatic mobile unit recognition
• H 507, W 535, D 515 mm
E 436/3 mobile injector unit TA
For use in PG 8536
• For approx. 3 AN sets
• 8 nozzles with spring supports for
breathing tubes with max. length of 1.5 m
• Spiral support
• Connection for hot-air drying unit
• With holder for ML/2 magnetic strip for
automatic mobile unit recognition
• H 507, W 535, D 515 mm
E 461/2 mobile injector unit TA
For use in PG 8535, PG 8536
• For 12 breathing tubes up to 1.5 m long,
fitted on a spiral rack
• 1 x E 432 holder,
for 4 breathing tubes
• 3 x E 433 holders,
for 4 silicone tubes, included
• 1 x E 434 holder for 4 paediatric
breathing tubes, included
• 1 x E 430/1 mesh tray
• Connection for hot-air drying unit
• With holder for ML/2 magnetic strip for
automatic mobile unit recognition
• H 502, W 535, D 515 mm
E 435/3 and E 436/3 scope of delivery:
• 1 x E 430 mesh tray
• 1 x E 432 holder for 3-4 corrugated
breathing tubes
• 2 x E 433 holders for
3-4 silicone breathing tubes1)
• 1 x E 434 holder for
3-4 paediatric breathing tubes
• 6 x E 466 injector nozzles for breathing
bags, 8 x 333 mm
• 1 x E 431 injector nozzle for breathing
bags, Ø 8 x 193 mm
• 10 x E 496 injector nozzles, 4 x 120 mm
) Pre-fitted
1
21
Anaesthetic equipment
22
E 381 mobile injector unit with drying
connection
For use in PG 8535, PG 8536
• For intubation material
• 20 nozzles, 4.0 x 30 mm with spring
supports
• 5 nozzles, 2.5 x 30 mm (supplied)
• 6 x E 466 injector nozzles for breathing
bags, 8.0 x 333 mm
• 2 x E 431 injector nozzles for breathing
bags, 8.0 x 193 mm
• Connection for hot-air drying unit
• With holder for ML/2 magnetic strip for
automatic mobile unit recognition
• H 502, W 535, D 515 mm
E 367 mobile injector unit with drying
connection
For use in PG 8535, PG 8536
• For intubation material
• 20 nozzles 2.5 x 30 mm
• 20 nozzles 4.0 x 30 mm
• 40 spring clips for nozzles
• 1 x E 378 insert 1/1 mesh tray
H 80 + 30, W 460, D 460 mm
• Connection for hot-air drying unit
• With holder for ML/2 magnetic strip for
automatic mobile unit recognition
• H 502, W 535, D 515 mm
U 167 lower basket for anaesthetic
equipment
For use in PG 8535, PG 8536
• For 4 soda lime containers, 9 secretion
jars and various other utensils
• 20 x 200 mm holders, spacing approx.
95 mm
• Plastic-coated
• H 220, W 535, D 516 mm
E 496 injector nozzle
• For intubation material, 4 x 120 mm
E 368 mobile injector unit with drying
unit for intensive care
For use in PG 8535, PG 8536
• For narrow-gauge breathing tubes, fitted
with:
• 10 nozzles, 4.0 x 30 mm with spring
supports
• 14 nozzles, 6.0 x 220 mm with spring
supports
• 2 x E 431 injector nozzles for breathing
bags, 8 x 193 mm
• 1 instrument box, UTS/1
H 93, W 102, D 180 mm
• Connection for hot-air drying unit
• With holder for ML/2 magnetic strip for
automatic mobile unit recognition
• H 502, W 535, D 515 mm
A 6 cover net 1/2
• Stainless-steel frame with polypropylene
mesh (particularly stable and durable)
• e.g. for E 142 mesh tray
• 215 x 445 mm
E 427 module
• Rack for 6 laryngoscopes
• H 92, W 210, D 134 mm
E 430/1 insert 1/3 mesh tray
• Wire mesh, mesh size 5 mm
• H 40, W 150, D 445 mm
E 468 1/4 mesh insert with lid and
compartments
• For various utensils
• Made from welded cross-wires/stainless
steel with lid and compartments
• Mesh size 5 x 5 x 1 mm
• H 70/76, W 250, D 170 mm
UTS Utensil box
• For sundry small items, with lid
• 3 compartments, compartment size
115 x 100 mm
• H 93, W 102, D 350 mm
23
Inserts for upper and lower baskets
E 417 insert 2/5
• For approx. 30 ear and nose speculae
• 280 compartments, approx. 13 x 13 mm
• Mesh size on base 1.7 mm
• For upper or lower basket
• H 63, W 173, D 445 mm
E 803 insert 2/5
• For ear and nose speculae
• 160 compartments, approx. 13 x 13 mm
• Mesh size on base 1.7 mm
• For upper or lower basket
• H 63, W 165, D 317 mm
E 374 insert 2/5
• For ENT instruments such as inhalation
tubes, etc.
• 24 compartments, approx. 45 x 45 mm
• 27 compartments, approx. 12 x 12 mm
• Mesh size on base 1.7 mm
• For upper or lower basket
• H 63, W 173, D 445 mm
Further inserts for ENT applications:
E 373 insert on Page 26
and E 106 inserts on Page 29
E 416 insert 1/4
• For 6 one or two-piece speculae
• 7 holders, spacing 40 mm
• For upper or lower basket
• H 157, W 178, D 279 mm
24
E 130 insert 1/2
• For 10 trays
• 11 holders, H 170 mm,
spacing 35 mm
• For lower basket
• H 180, W 180, D 445 mm
E 806/1 insert
• For 8 half-trays or shallow trays
• 9 holders (8 compartments)
• Max. tray size 290 x 30 mm
• H 114, W 305, D 348 mm
E 339/1 insert 3/5
• For 13 half-trays or shallow trays
• 14 holders (13 compartments)
• Max. tray size 290 x 20 mm
• H 115, W 305, D 498 mm
E 131/1 insert 1/2
• For 5 mesh trays/kidney dishes
• 6 holders, H 160 mm,
spacing 80 mm
• For lower basket
• H 168, W 180, D 495 mm
E 800 insert
• For 3 mesh trays/kidney dishes
• 4 holders, H 165 mm,
spacing approx. 68 mm
• For upper or lower basket
• H 165, W 140, D 290 mm
E 492 insert 1/2
• For 9 kidney dishes
• 9 holders, H 86 mm,
spacing 49 mm
• For lower basket
• H 120, W 256, D 474 mm
25
Inserts for upper and lower baskets
E 146 insert 1/6 (illustrated)
• Mesh size on base 3 mm
• Mesh size on sides 1.7 mm
• Mesh size on lid 8 mm
• 2 hinged handles
• For upper or lower basket
• H 55, W 150, D 225 mm
E 328 inlay rack
• For instruments in upright position
• For E 146/E 363
E 373 insert 1/6
• For ENT instruments (e.g. ear funnels)
• Wire mesh, mesh size:
Base 3 mm, sides 1.7 mm,
lid 3 mm
• 28 upright supports
• 2 hinged handles
• For upper or lower basket
• H 55, W 150, D 225 mm
E 337/1 insert 2/5
• For micro-instruments, upright
• 12 compartments, approx. 22 x 28 mm
• 4 compartments, approx. 25 x 28 mm
• 4 plastic receptacles
• 48 compartments, approx. 13 x 14 mm
• H 113, W 173, D 445 mm
E 802/1 insert
• For micro-instruments, upright
• 8 compartments, approx. 30 x 28 mm
• 8 compartments, approx. 16 x 28 mm
• 3 plastic receptacles
• 15 compartments, approx. 16 x 20 mm
• H 113, W 163, D 295 mm
E 363 insert 1/6
• Mesh size 1 mm, with lid
• For upper or lower basket
• H 55, W 150, D 225 mm
E 441/1 insert 1/4
• For micro-instruments
• Mesh size on base 1.7 mm
• Solid sides, stackable
• Internal divisions with 6 adjustable
supports provide the ideal storage for
instruments.
• For upper or lower basket
• H 60, W 183, D 284 mm
26
E 142 insert 1/2
• DIN mesh tray
• 1 mm wire gauge
• Mesh size 5 mm
• 5 mm all-round frame
• 2 hinged handles
• Max. load 10 kg
• H 45/55, W 255, D 480 mm
E 143 insert 1/4
• Mesh tray
• 1 mm wire gauge
• Mesh size 5 mm
• 5 mm all-round frame
• 2 hinged handles
• Max. load 5 kg
• For upper or lower basket
• H 45/55, W 255, D 230 mm
E 378 insert 1/1
• For various utensils
• 0.8 mm wire gauge
• Mesh size 1.7 mm
• 5 mm all-round frame
• 2 handles
• For lower basket
• H 80/110, W 460, D 460 mm
E 473/1 mesh insert with lid
• Mesh basket with lid for small parts
• Hooks in place
• H 85, W 60, D 60 mm
E 379 insert 1/2
• For various utensils
• 0.8 mm wire gauge
• Mesh size 1.7 mm
• 5 mm all-round frame
• 2 handles
• For upper or lower basket
• H 80/110, W 180, D 445 mm
E 451 insert 1/6
• Mesh tray with lid for sundry small items
• Wire gauge:
1 mm base
0.8 mm sides,
1 mm lid
Mesh gauge:
3 mm base
1.7 mm sides
8 mm lid
• Internal divisions removable
• H 55, W 150, D 225 mm
27
E 484 insert for upper and lower baskets
28
E 484 insert 1/1
• For various utensils
• Wire mesh: 1.4 mm
Mesh size: 8 mm
• For holders
– 4 x E 485 for 9 kidney dishes or
– 4 x E 486 for 4 bowls or
– 4 x E 487 for 16 theatre shoes or
– 3 x E 488 for 9 breathing masks or
– 11 x E 489 universal holders
e.g. for insoles
• H 65 (150), W 470, D 480 mm
Sample features:
E 484 with 4 x E 485 holders
• Can be fitted with 4 holders
E 485 for 9 kidney dishes
Sample features:
E 484 with 4 x E 486 holders
• Can be fitted with 4 holders
E 486 for 4 bowls
Sample features:
E 484 with 4 x E 487 long holders
• Fitted with 4 x E 487 holders, each for 4
theatre shoes, height 280 mm
• Dimensions E 487
H 280, W 464, D 10 mm
Sample features:
E 484 with 11 x E 489 universal holders
• Fitted with 11 x E 489 universal holders,
e.g. for insoles, height 60 mm
• Dimensions E 489
H 60, W 464, D 10 mm
Sample features:
E 484 with 3 x E 488 holders
• Fitted with 3 x E 488 holders,
each for 9 breathing masks
Inserts
E 106 insert 1/2 (illustrated)
• For ENT instruments (e.g. ear funnels)
• 10 spring hooks, H 175 mm
• 16 spring hooks, H 105 mm,
Spacing approx. 60 mm
• H 186, W 195, D 430 mm
E 125 insert 1/1* (illustrated)
• For 9 bottles, 2,000 ml
• 9 compartments, compartment sizes
(bottle) 125 x 125 mm
• Compartment size (neck) 55 x 55 mm
• H 224, W 460, D 460 mm
E 128 insert 1/1
• For 24 bottles, 250 ml
• 24 compartments, compartment sizes
(bottle) 71 x 71 mm
• Compartment size (neck) 46 x 46 mm
• H 103, W 445, D 445 mm
E 106/1 insert 1/2
• 26 small spring hooks, H 105 mm,
Spacing approx. 60 mm
• H 116, W 195, D 410 mm
E 124 insert 1/1*
• For 16 bottles, 1,000 ml
• 16 compartments, compartment sizes
(bottle) 100 x 100 mm
• Compartment size (neck) 48 x 48 mm
• H 148, W 460, D 460 mm
E 127 insert 1/1
• For 44 bottles, 100 ml
• 44 compartments, compartment sizes
(bottle) 57 x 57 mm
• Compartment size (neck) 46 x 46 mm
• H 102, W 445, D 445 mm
E 129 insert 1/1
• For 20 bottles, 500 ml
• 20 compartments, compartment sizes
(bottle) 84 x 84 mm
• Compartment size (neck) 46 x 46 mm
• H 113, W 445, D 445 mm
E 126 insert 1/1 (illustrated)
• For 48 bottles, 50 ml
• 48 compartments, compartment sizes
(bottle) 45 x 45 mm
• Compartment size (neck) 28 x 28 mm
• H 83, W 445, D 445 mm
E 106/2 insert 1/2
• 13 large spring hooks, H 175 mm,
spacing approx. 85 mm
• H 186, W 180, D 420 mm
Description
• Baskets and inserts only suitable for the
simple cleaning of infusion bottles
• Neither direct injection nor double spray
system according to GMP guidelines.
* Not for use in upper basket
29
Minimally invasive surgical instruments
Injector rail on E 450/1
E 450/1 mobile injector unit with drying
connection
For use in PG 8535, PG 8536
• For MIS instruments,
max. length 550 mm
• E 451 mesh tray for sundry small items
• Loading on 2 levels
• Dimensions/clearance from bottom level
upwards:
Level 1 = H 110, W 480,
D 500 mm (for inserts, e.g. 2 x E 457)
• Level 2 = H 360, W 350, D 200 mm
• Applications
E 451 mesh tray for small items
E 457 insert for separable MIS
instruments
E 460 insert for rigid fibre optics
E 473 mesh tray for small items
E 444 spiral rack for lightguide and
irrigation hoses
• Connection for hot-air drying unit
• With holder for ML/2 magnetic strip for
automatic mobile unit recognition
• H 502, W 535, D 515 mm
30
Scope of delivery:
3 x E 336 irrigation sleeves, 121 mm
2 x E 362 blanking screws
15 x E 442 irrigation sleeves, 121 mm,
for MIS instruments, 4-8 mm
5 x E 443 irrigation sleeves, 121 mm,
for MIS instruments, 8-12 mm
1 x E 445, 12 caps
for irrigation sleeves, 6 mm
1 x E 446, 12 caps
for irrigation sleeves, 10 mm
3 x E 447 female adapters,
for male LuerLock
6 x E 448 silicone hose
300 mm, 5 x 1.5 mm with male
LuerLock adapter
5 x E 449 male adapter,
for female LuerLock
1 x E 451 1/6 mesh insert, with lid
3 x E 452 injector nozzles, 2.5 x 60 mm
8 x E 453 injector nozzles,
4.0 x 110 mm with spring support
6 x E 454 injector nozzles for trocar
sleeves, 10-15 mm
4 x E 456 spring stays for MIS instruments,
e.g. scissors, forceps, etc.
3 x E 464 sleeves for E 454 injector nozzles
2 x E 472 spring clip for injector nozzle,
Ø 4.0 mm
Minimally invasive instruments
Modular system for PG 8536
washer-disinfector
E 474/4 injector carriage with drying
connection
• For use in PG8536
• Carriage for inserts/modules
• Modular system for up to
2 MIS OP sets
• For lumened instruments in 3 inserts/
modules with integrated nozzles/adapters
• Applications:
E 903 module insert
for MIS instruments/urology
E 905 module insert
for short MIS instruments
E 906 module insert
for long MIS instruments
E 444 spiral rack for lightguide and
irrigation hoses
E 460 insert for rigid fibre optics
E 457 insert for separable MIS
instruments or
E 142 DIN mesh tray
• Connection for hot-air drying unit
• With holder for ML/2 magnetic strip for
automatic mobile unit recognition
• H 507, W 535, D 515 mm
Scope of delivery:
• 2 x E 362 blanking screws
• 3 x E 447 adapters, female
31
Minimally invasive surgical instruments
Modular system for PG 8536 washer-disinfector
When it comes to quality assurance in
surgeries and hospitals, the optimum
reprocessing of surgical instruments is
a central issue.
The use of instruments in transurethral
resection invariably means instruments
contaminated right down to the last lumen
and crevice. Furthermore, these often
very delicate instruments and the short
duration of surgery in this field poses
huge challenges in terms of the safe and
fast provision of fresh instruments and
adequate reprocessing. As in all medical
fields, the motto is:
There can be no successful disinfection
and sterilisation without thorough
cleaning.
Miele has developed a systematic
and comprehensive approach to the
reprocessing of minimally invasive
surgical instruments, e.g. from urology,
arthroscopy and laparoscopic surgery
which allows the decentral reprocessing
of entire instrument sets – efficiently,
gently and safely. The new PG 8536
washer-disinfector represents a new highperformance unit with freely programmable
controls. The E 474/4 load carrier and
the modular inserts for instruments offer
distinct advantages with respect to
handling, ergonomics, the protection of
personnel and flexibility. This standardised
reprocessing method together with
documented processes provides the safety
margins a commitment to quality demands.
The modules used can be configured to
suit individual sets of surgical instruments,
which are easily connected using on-board
adapters. For urological applications, the
E 903 module is available for TUR sets.
Sets of instruments from other disciplines,
e.g. laparoscopy, require the use of E 905
module inserts for short instruments or the
E 906 for long instruments.
32
For dental clinics, Miele offers the E 919
module for transmission instruments,
designed for the reprocessing of large
quantities of turbines, contra-angles and
hand-pieces. Each module is able to
accommodate 10 transmission instruments
and hence 3 modules offer ample space
for 30 transmission instruments per cycle
in the E 474.
Once loaded, the modules are placed in
the E 474/4 load carrier and connected.
Given the need to accommodate
application-specific variations, Miele offers
an empty load carrier without modules and
inserts, thereby allowing users to configure
units individually to meet particular needs,
particularly those in the field of minimally
invasive surgery.
Note
Miele's systematic approach to
reprocessing minimally invasive and TUR
surgical instruments is illustrated by the
video entitled 'Cleaning and disinfection of
minimally invasive instruments', available
on DVD.
For further information:
www.miele-professional.de
E 905/1 modular insert
• For short MIS instruments
• 16 receptacles
• Sectioned for arthroscopes,
laparoscopes etc.
• H 40, W 461, D 510 mm
Supplied as standard with:
• 1 x E 336 MIBO injector sleeve for
pipettes/MIS instruments
• 2 x E 362 blanking screws
• 1 x E 442 injector sleeves for MIS
instruments, 4–8 mm
• 2 x E 447 female adapters,
for male LuerLock
• 4 x E 448 silicone hoses, 300 mm,
5 x 1.5 mm with male LuerLock adapters
• 2 x E 449 male adapter,
for female LuerLock
• 4 x E 452 injector nozzles, 2.5 x 60 mm
• 3 x E 453 injector nozzles,
4.0 x 110 mm with spring supports
• 3 x E 454 injector nozzles for trocar
sleeves, 10-15 mm
• 1 x E 464 sleeve
for E 454 injector nozzles
• 1 x E 472 spring support for injector
nozzle, 4 mm
• 1 x E 907/1 insert / mesh tray with lid for
small parts
E 903/1 modular insert
• For TUR sets (transurethral resection)
• 10 receptacles
• H 40, W 461, D 510 mm
Supplied as standard with:
• 3 x E 442 irrigation sleeves, 121 mm,
for MIS instruments, 4–8 mm
• 1 x E 444 insert/spiral rack for fibre optic
cables and irrigation tubes
• 1 x E 447 female adapters,
for male LuerLock
• 4 x E 448 silicone hoses,
300 mm, 5 x 1.5 mm with male LuerLock
adapters
• 3 x E 453 injector nozzles,
4.0 x 110 mm with spring supports
• 1 x E 454 irrigation sleeve for bladder
syringe or trocar sleeve
• 3 x E 467 injector sleeves, 205 mm,
for MIS instruments/forceps
• 3 x E 469 injector sleeves, 300 mm,
for MIS instruments/urology
• 1 x E 907/1 insert / mesh tray with lid for
small parts
• 2 m silicone hose, Ø 5 mm
• 2 plastic supports, for use in E 474/1, E
902/1 mobile units
E 919
For connection of 10 turbines/hand-pieces
and contra-angles as well as dental and
ENT instruments
• For use in E 474
• Reprocessing using VARIO TD programme
• Cleaning should be performed using
neutral to mildly alkaline liquid detergents
• Combination with MIS instruments
possible
• Scope of delivery: 10 receptacles for
transmission instruments, without
adapters (ADS 1-3)
E 906/1 modular insert
• For long shafted MIS instruments
• 10 receptacles
• Sectioned for arthroscopes, laparoscopes
etc.
• H 40, W 461, D 510 mm
Supplied as standard with:
• 1 x E 336 MIBO injector sleeve for
pipettes/MIS instruments
• 2 x E 362 blanking screws
• 5 x E 442 injector sleeves for
minimally invasive instruments, 4–8 mm
• 3 x E 443 injector sleeves for MIS
instruments, 8–12 mm
• 2 x E 448 silicone hoses, 300 mm,
5 x 15 mm with male LuerLock adapters
• 1 x E 454 injector nozzles for trocar
sleeves, 10-15 mm
• 2 x E 456 spring stays
for MIS instruments
• 1 x E 464 sleeve
for E 454 injector nozzles
• 1 x E 908 insert for separable
MIS instruments/inner shafts
33
MIS accessories
34
E 451 insert 1/6
• Mesh tray with lid for sundry small items
• Wire gauge:
1 mm base
0.8 mm sides,
1 mm lid
Mesh gauge:
3 mm base
1.7 mm sides
3 mm lid
• Internal divisions removable
• H 55, W 150, D 225 mm
E 907/1 insert/mesh tray
• Mesh tray with lid for sundry small items
• Mesh size 3 x 1 mm
• Hooks to slot into E 905
• H 46, W 129, D 170 mm
E 908/1 insert
• For separable MIS instruments/inner
shafts
• Mesh width 8 x 1 mm,
solid sides
• Individual arrangements with 4 holders
for securely positioning 8–12 shafts from
disassembled MIS instruments
• Hooks to slot into E 906
• H 36, W 130, D 460 mm
E 142 insert 1/2
• DIN mesh tray
• 1 mm wire gauge
• Mesh size 5 mm
• 5 mm all-round frame
• 2 hinged handles
• Max. load 10 kg
• H 45/55, W 255, D 480 mm
E 473/1 insert/filter
• Mesh basket with lid for small parts
• For hooking onto mesh trays
• H 85, W 60, D 60 mm
E 444 insert/spiral rack
• For fibre optics and irrigation tubes
• Fibre optics and tubes wound spirally
around central rack
• H 168 mm, with folding clip, 214 mm
• Ø 140 mm
E 457 insert 1/2
• For separable MIS instruments
(e.g. 12 handles and inner shafts)
• Mesh base, 3 mm mesh size, solid sides
• Welded holders for 8-12 handles,
variable arrangement, with 3 holders for
storing and securing 8-12 shafts from
disassembled MIS instruments
• H 62, W 192, D 490 mm
E 460 insert 1/4
• For rigid fibre optics of varying lengths
• Mesh size, base 8 x 1 mm
Sides/lid 7 x 7 x 3 mm
• With 3 holders for 2 rigid fibre optics of
varying lengths
• H 53, W 100, D 430 mm
E 362 blanking screw
• M 8 x 1 thread, to close connectors on
mobile units
35
MIS accessories
2
1
1 2 3 4 5
E 469 irrigation sleeve 1
• For MIS instruments/
urology
• Length 300 mm, 11 mm
• Cap, 6 mm
(Mat. no. 4174960)
• Clamp
(Mat. no. 4174850)
E 467 irrigation sleeve 2
• For MI instruments/forceps
• Length 205 mm, 11 mm
E 336 irrigation sleeve 3
• Length 121 mm, 11 mm
E 442 irrigation sleeve 4
• For MIS instruments, 4-8 mm,
screw thread
• Length 121 mm, 11 mm
• Cap, 6 mm
(Mat. no. 4174960)
• Clamp (Mat. no. 4174850)
Clamp
(Mat. no. 4174850)
E 445 caps
• 12 caps for irrigation sleeves
• 6 mm
E 446 caps
• 12 caps for irrigation sleeves
• 10 mm
E 456 spring stay 1
• For MIS instruments
E 475 holder bracket 2
• For MIS insert
• To secure irrigation sleeves
(Mat. no. 4692430)
E 443 irrigation sleeve 5
• For MIS instruments,
8-8.5 mm
• Length 121 mm, 11 mm
• Cap, 10 mm
(Mat. no. 4174970)
• Clamp
(Mat. no. 4174850)
1 2 3 4 5
E 447 adapter, female 1
• For LuerLock, male, screw
thread for E 450/1,
O 176, O 183
E 452 injector nozzle 3
• Length 60 mm, 2.5 mm,
screw thread, for mobile
injector unit
E 449 adapter, male, without
centre pin* 2
• For LuerLock, female, screw
thread for E 450/1,
O 176, O 183
E 453 injector nozzle 4
• Clip bracket
• Length 110 mm, 4 mm, screw
thread, for mobile injector
unit
E 448 silicone hose 5
• LuerLock adapter, male
• Length 300 mm, 5 mm
• Nozzle, 8 x 1 mm thread
36
* Adapter with centre pin
available from Spares,
Mat. no. 4224230.
E 464 adapter
• For injector nozzle E 454,
13 x 65 mm
• Height-adjustment clip
(Mat. no. 4692440)
E 454 injector nozzle
• For trocar sleeves
10-15 mm, 8 x 150 mm
• Height-adjustment spring
(Mat. no. 4692430)
E 471 spring clamp
• For injector nozzle
2.5 mm, for E 452
E 472 spring clamp
• For injector nozzle
4.0 mm, for E 351, E 453
For ophthalmological micro-instruments
Geuder AG recommends that their current
range of instruments be reprocessed in a
Miele washer-disinfector.
E 429/1 mobile injector unit
For use in PG 8535
• For ophthalmological/micro-instruments
• For 2-4 OP sets
• Built-in spray arm
• Loading on 2 levels
• Vertical clearances from bottom:
Level 1: 125 mm
Level 2: approx. 150 mm from top of
threaded bush
• Level 1:
For inserts (e.g. E 441/1 or E 142)
• Level 2: left-hand side:
20 connectors for lumened instruments
(10 LuerLock adapters, male,
10 LuerLock adapters, female),
connection for E 478 is on feed pipe
• Level 2, right-hand side:
16 LuerLock adapters, male, with
horizontal hose
• With holder for ML/2 magnetic strip for
automatic mobile unit recognition
Supplied as standard with:
• 1 bag E 476 (50 off) and
• 1 bag E 477 (20 off)
• 8 x E 790 adapters LuerLock female/
female
• 8 x E 791 adapters, LuerLock female/
male
Note:
The E 429/1 requires a second feed pipe
from the bottom, hence the bottom spray
arm in the machine must be removed.
37
For ophthalmological micro-instruments
E 792
LuerLock connector, male with silicone
hose
E 790
Connector
LuerLock adapters, female/female
E 791
Connector
LuerLock female/male
E 440/3 mobile injector unit
For use on PG 8536
• For ophthalmological/micro-instruments
• For 4 OP sets
• Built-in spray arm
• Loading on 3 levels
• Levels 1 and 2: For inserts, (e.g. E 441/1)
or E 142
• Level 3: left-hand side:
20 connectors for lumened instruments
(10 LuerLock adapters, male,
10 LuerLock adapters, female),
connection for E 478 is on feed pipe
• Level 3, right-hand side:
16 LuerLock adapters, male, with
horizontal hose arrangement
• With holder for ML/2 magnetic strip for
automatic mobile unit recognition
• Clearances from bottom:
Level 1: 115 mm
Level 2: 86 mm
Level 3: approx. 110 mm from top of
threaded sleeve
38
Supplied as standard with:
• 1 bag E 476 (50 off) and
• E 477 bag (20 off)
• 8 x E 790 adapters LuerLock female/
female
• 8 x E 791 adapters, LuerLock female/
male
Adapters available individually:
• Pack of 4 x E 790
LuerLock female/female
• Pack of 4 x E 791
LuerLock female/male
• Pack of 4 x E 792
LuerLock male with silicone hose
(160 mm)
Accessories for micro-instruments
E 478/1 adapter
• For 4 narrow-lumened cannulae (Sautter
cannulae)
E 441/1 insert 1/4
• For micro-instruments
• Mesh size on base 1.7 mm
• Solid sides, stackable
• Internal divisions with 6 adjustable
supports provide the ideal storage for
instruments.
• H 60, W 183, D 284 mm
FP
• Stainless-steel filter insert for E 478
• Reprocessable
• Diameter 30 mm
E 476 adapters
• For use in mesh trays with 5 mm mesh
(e.g. E 142)
• 50 per bag
• For instruments with a diameter of 4 to
8 mm
E 142 insert 1/2
• DIN mesh tray
• 1 mm wire gauge
• Mesh size 5 mm
• 5 mm all-round frame
• 2 hinged handles
• Max. load 10 kg
• H 45/55, W 255, D 480 mm
Illustration shows E 142 with E 476
receptacles and E 477 stops
E 479 adapters
• For use in mesh trays with 5 mm mesh
(e.g. E 142)
• 50 per bag
• For instruments with a diameter of up to
4 mm
E 477 stoppers
• For use in mesh trays with 5 mm mesh
(e.g. E 142)
• 20 per bag
39
Inserts for baby bottles and accessories
40
E 135 insert 1/2
• Container for 19 baby bottles à 250 ml
Bottle size 56 x 56 mm
Neck 49 x 49 mm
• H 194, W 192, D 447 mm incl. lid
• For upper or lower basket
E 135/2 insert 1/2
• For 19 baby bottles à 90 ml
Bottle size 51 x 51 mm
Neck 42 x 42 mm
• H 125, W 192, D 447 mm
• For upper or lower basket
E 135/1 insert 1/2
• For 19 baby bottles à 110 ml
Bottle size 51 x 51 mm
Neck 45 x 45 mm
• H 135, W 192, D 447 mm
• For upper or lower basket
E 135/3 insert 1/2
• For 19 baby bottles à 120 ml
Bottle size 56 x 56 mm
Neck 49 x 49 mm
• H 135, W 192, D 447 mm
• For upper or lower basket
E 364 insert 1/2
• Container for 36 wide-necked teats
• 36 compartments, 41 x 41 mm
• Hinged lid with catch
• H 77, W 215, D 445 mm
E 458 insert 1/2
• Container for 36 screw-on teats
• 36 compartments, 29 x 29 mm
• Hinged lid with catch
• H 63, W 215, D 445 mm
AK 12 insert 1/2 basket version
• For breast pumps
• For various utensils
• H 67/127, W 225, D 442 mm
(A 14 lid not included)
Baby bottles:
Reprocessing and transportation system
Baby bottles are generally washed at
ward level. Miele's G 7862 and PG 8535
washer-disinfectors with a height of 820
mm (excl. lid) are interesting propositions
as they can be installed as undercounter
units. Miele has also developed a highly
practical container system for transporting,
handling, washing and disinfecting
baby bottles. The containers are able to
accommodate all standard bottle sizes.
This allows 76 baby bottles to be washed
and disinfected per cycle. Teats and
screw-on teat holders are each placed in
appropriate inserts.
1. Used and empty baby bottles are placed
in E 135 containers with their necks
facing up.
2. The container is then sealed with a mesh
lid and turned by 180° (bottle necks
facing downwards) and placed in the
disinfector.
3. After washing and disinfection, the lid is
removed and the bottles can be refilled
whilst still in the container.
4. Full bottles are then sealed and stored
until needed in a refrigerator.
41
Inserts for theatre shoes
Theatre shoes should be thoroughly
washed and disinfected after operations.
Most common are theatre shoes made
from polyurethane (PU). In the past, the
automatic reprocessing of these heatsensitive items relied on chemo-thermal
processes and a temperature of 60°C
with a 5-minute holding time. However,
the chemical disinfectants involved pose
handling problems and are costly.
After intensive trials, Miele has now
developed a purely thermal reprocessing
method for theatre shoes which has been
validated in practice.
This reprocessing programme is available
on models PG 8535 and PG 8536.
Thorough washing at temperatures below
55°C is followed by thermal disinfection in
the last water intake cycle at a temperature
of 75°C held for 2 minutes. At 22 minutes
(excluding drying), this new process is
considerably shorter than chemo-thermal
processes (approx. 37 minutes) and
dispensing with chemical disinfectants
offers both environmental and economical
benefits.
42
O 167 upper basket
• For up to 28 theatre shoe insoles
• Built-in spray arm
• H 195, W 531, D 475 mm
O 173 upper basket
• For up to 8 theatre shoes, max. Size 41
• Built-in spray arm
• H 195, W 531, D 475 mm
U 874/1 lower basket/open front
• For E 484 adapter
• Open front
• For various inserts
• Vertical clearances in combination with
upper basket:
O 176 approx. 110 mm
O 177/1 approx. 220 mm 20-40 mm
O 183 approx. 185 mm +/–20 mm
O 188/1 approx. 270 mm +/–20 mm
O 190/1 approx. 220 mm +/– 20 mm
O 191 approx. 295 mm
• With holder for ML/2 magnetic strip for
automatic mobile unit recognition
• H 50, W 534, D 515 mm
U 168/1 lower basket
• For up to 20 theatre shoes, max. Size 45
• 20 holders, 295 mm
• With holder for ML/2 magnetic strip for
automatic mobile unit recognition
• H 315, W 535, D 515 mm
E 484 insert 1/1
• For various utensils
• Wire mesh: 1.4 mm
Mesh size: 8 mm
• Fitted with holders
– 4 x E 487 for 16 theatres shoes or
– 11 x E 489 universal holders
e.g. for insoles
• H 65 (150), W 470, D 480 mm
E 484 with 4 x E 487 long holders
• Fitted with 4 x E 487 holders,
each for 4 theatre shoes, height 280 mm
• Dimensions E 487
H 280, W 464, D 10 mm
E 484 with 11 x E 489 universal holders
• Fitted with 11 x E 489 universal holders,
e.g. for insoles, height 60 mm
• Dimensions E 489
H 60, W 464, D 10 mm
43
Transport trolleys, accessories
MT Mieltrans trolley
• Trolley for storing and transporting
baskets and inserts
• 4 height-adjustable levels
• Loading dimensions
W 549, D 599 mm
• Height-adjustment increments 102.5 mm
• 4 lockable wheels
• H 1985, W 616, D 662 mm
44
MC/1 Mielcar,
supply and disposal trolley
• For loading washer-disinfectors and
handling baskets and inserts
• 2 levels (sloping towards centre)
• Rail handle and docking plate
• Docking height H 640–885 mm, infinitely
adjustable
• 4 wheels, of which 2 are lockable
• H 1000, W 630, D 814 mm
(with docking plate raised
D 960 mm)
• For use on PG 8536 and washerdisinfectors installed on 30 cm plinth
ML/2 magnetic strip
• Magnetic strip for automatic mobile unit
recognition
• 5 magnets, configurable
• 15 possible combinations
Retrofittable magnetic spray arm
• For spray arm sensing function with
retrofittable magnetic spray arms on
PG 8535, PG 8536 on baskets/inserts
without magnetic spray arms.
Plinths
UE 30-30/60-78 plinth
• For use with G 7895/1 and G 7896
• Stainless-steel plinth, bolted to machine
• H 300, W 300, D 600 mm
UC 30-90/70-78 plinth (illustrated)
• For use with PG 8535
• Stainless-steel plinth, bolted to machine
• H 300, W 900, D 700mm
45
Dispensing accessories
Dispenser modules and supply
containers can be optionally
accommodated in the G 7896 dispenser
cupboard or in an existing cabinet
DOS G 60 dispenser module
• For use on PG 8535
• For liquid alkaline detergents and
chemical disinfectants
• Peristaltic pump, adjustable via
machine's electronic controls
• Long siphon (300 mm) for 5 l and 10 l
canisters, incl. level fill monitoring
• Length of connection lead: 1.90 m
G 7896 dispenser unit
Housing unit for DOS modules and supply
containers for undercounter installation
• H 850 (820), W 300, D 600 mm
• Compatible with G 7881, G 7891
• Freestanding unit, can be built under
• Unit with removable door
• Outer panelling in stainless steel or white
• Interior dimensions: H 530, W 249, D 480
mm on 3 levels
Level 1: Removable pull-out drawer on
telescopic runners for DOS modules
Levels 2 and 3: Removable pull-out
drawer on telescopic runners with drip
tray and lock for canisters
DOS K 60 dispenser module
• For liquid alkaline detergents
and chemical disinfectants
• Peristaltic pump, adjustable via
machine's electronic controls
• Integrated dispenser monitoring function
ensuring high level of process security in
compliance with EN ISO 15883
• Long siphon (300mm) for 5 l and 10 l
canisters, incl level fill monitoring
• Length of connection lead: 1.90 m
• Option: Conversion kit, Part no. 5458030,
for siphon (10-30 l containers) available
from Spares.
Canister sizes
4 x 5l, 245 x 225 x 145 mm*
2 x 10 l, 140 x 193 x 307 mm
2 x 10 l, 223 x 203 x 321 mm
2 x 10 l, 229 x 193 x 323 mm
2 x 10 l, 194 x 204 x 353 mm
1 x 20 l, 289 x 233 x 396 mm
1 x 25 l, 288 x 234 x 456 mm
* Only possible with DOS K-60/1 dispenser with short siphon 46
Note
The use of liquid detergent is recommended in the VarioTD
programme.
DOS G 10 dispenser module
• For use on PG 8535
• For liquid acidic agents (surfactant,
neutralising agent)
• Features as per DOS G 60
DOS NA 120
• For use on PG 8536
• Integrated bellows-type dispenser pump
incl. ultrasound flow control for pHneutral/alkaline detergents and chemical
disinfectants
• Retrofittable by Service
DOS S 20
• For use on PG 8536
• Integrated bellows-type dispenser pump
for surfactants and neutralising agents
• Retrofittable by Service
47
Accessories for reprocessing
with fully demineralised water
E 318 full demineralisation cartridge,
empty
• Can be charged with 20 l of single-use
resin
Disposable resin
• 20 l homogenous, mixed-bed resins for
E 318
• Box with 2 bags x 10 l, vacuum-sealed in
plastic bags
• Replacement filter bag
E 316 refill set
• Plastic barrel with lid and funnel for 30 l
of disposable resin
G 7895/1 Aqua Purificator
• For use on G 7881, G 7891
• Housing unit for 2 x E 310/E 318
demineralisation cartridges
• Integrated conductivity meter
• Generally recommended quality for final
rinse < 15 µS/cm
• H 850 (820), W 300, D 600 mm
• Freestanding unit, can be built under
• Outer panelling in stainless steel or white
• Electrical connection AC 230 V 50 Hz
• Water connection:
1 x cold water, 3/4" threaded union
1 x connection between cartridge and
machine, 2.5 - 10 bar flow pressure to
cartridge
(pressure loss approx. 1 bar per cartridge)
E 310 full demineralisation cartridge
charged
• Pressure-proof stainless-steel cartridge
• H 570, Ø 240 mm
• Complete with vent and pressure relief
valve
• Contains 20 l of reusable mixed resin
Delivery capacity in l depends on the total
salt content of the raw water and the max.
acceptable conductivity.
Conductivity
5 µS/cm 10 µS/cm
5° dH 4,250 4,500
10° dH 2,125 2,250
15° dH 1,420 1,500
20° dH 1,070 1,125
25° dH 850
950
30° dH 710
750
The information provided in this chart is
intended as a guide only
48
LWM Module C conductivity meter
• For E 310/E 318 water demineralisation
cartridges
• H 118, W 235, D 110 mm
• Electrical connection AC 230 V 50 Hz
• 2 hoses, approx. 1.9 m,
3/4" threaded union
• Integrated conductivity meter:
Range: 0–20 µS/cm
1.5 µS/cm, corresponds to tridistilled
water
2.5 µS/cm, corresponds to bidistilled
water
20.0 µS/cm, corresponds to singledistilled water
Accessories for reprocessing
with fully demineralised and softened water
E 313 wall valve (top)
• For manual delivery of demineralised
water
• Pressure hose approx. 1.5 m, pressureproof to 10 bar
E 314 cabinet mounted valve (bottom)
• For manual delivery of demineralised
water
• Pressure hose approx. 1.5 m, pressureproof to 10 bar
PG 8597 AquaSoft system, twin-tank
water softener
• For continuous delivery of softened water,
max. 40°dH
• H 570, W 360, D 360 mm
• Weight (excl. salt) approx. 30 kg
• Freestanding unit on castors. Filled from
top.
• Plastic casing
• Capacity: 19 l/min (constant),
max. delivery 30 l/min
• Demand-controlled twin-tank system
• Does not require connection to power
supply
• Equipped with 2 x 4.5 l resin-filled
canisters and 1 container for 20 kg of salt
• Water connection
2 pressure hoses, approx. 1.5 m,
¾" threaded union
1 x cold or hot water, max. 70°C
Min. 1 bar intake flow pressure to system,
max. static pressure 8 bar
2.5 bar minimum flow pressure (machines
without softener)
3.5 bar min. flow pressure (machines with
softener)
1 x connection from system to machine
2 drain hoses, approx. 1.5 m
(DN 8 for reactivation water and overflow,
odour trap and non-return valve to be
provided on site)
• Water consumption 19 l/reactivation
cycle
49
Technical data
G 7862
Washer-disinfectors
G 7862
Frontloading unit with bottom-hinged door, excl. baskets
•
Freestanding unit with lid, can be built under
•
Freshwater system, max. temperature 93°C
•
Circulation pump [Qmax. l/min.]
400
Controls/Programmes
MULTI NOVOTRONIC / 8 programmes
•
Electric door lock
•
Buzzer, acoustic signal at end of programme
•
Programme recontinuation in event of power outage
•
Serial interface for process documentation,
•
Water connections
1 x cold water, 0.5–10 bar flow pressure (50–1000 kPa)
•
1 x hot water, 0.5–10 bar flow pressure (50–1000 kPa)
•
No. of inlet hoses, ½" with ¾" threaded union, l = approx. 1.7 m
2
Drain pump DN 22, head height 100 cm
•
Steam condenser water drain (DN 22)
• WaterProof System (WPS)
• Electrical connection, supply lead approx. 1.7 m, 5 x 2.5 mm²
3N AC 400 V 50 Hz/convertible to AC 230 V 50 Hz*
•
AC 230 V 50 Hz/convertible to 3N AC 400V 50Hz*
•
Heating [kW] (3N/ AC)
8.5/6
Circulation pump [kW] (3N/ AC)
0.7/0.7
Total rated load [kW] (3N/ AC)
9.2/6.7
Fuse rating [A] (3N/ AC)
3 x 15-16/1 x 30
Dispenser systems
1 door dispenser for powder detergent
•
1 door dispenser for liquid surfactant
•
Connection options
DOS K 60 for liquid detergents/chemicals
* Conversion results in changes to cycle times (charges apply)
50
1
Washer-disinfectors
G 7862
Water softeners
For cold and hot water to max 70°C, Monobloc
•
Steam condenser
Heat exchanger
•
Dimensions/Weight
External dimensions H/W/D (without lid H 820 mm) [mm]
850/600/600
Cabinet dimensions H/W/D [mm]:
500/530/O=474 U=516* Weight [kg]
72
Casing options
Stainless steel (AE)
•
Compliance with standards
DIN EN ISO 15883-1/2,
•
AS 4187 / AS 2945
•
Test certificates
VDE, VDE-EMC, IP X1
•
MDD CE 0366
•
DVGW
•
* O = Upper basket, U = Lower basket
• = Standard, – = Not available
G 7862
51
Technical data
PG 8535 and PG 8536
Washer-disinfectors
PG 8535
PG 8536
Frontloading unit with bottom-hinged door, excl. baskets
•
•
Built-under/freestanding unit without lid
•
–
Freestanding unit with lid
–
•
Freshwater system, max. temperature 93°C
•
•
Circulation pump [Qmax. l/min.]
400
600
PROFITRONIC+, freely programmable
•
•
64 programme slots
•
•
Spray arm sensing
•
•
Magnetic strip for automatic mobile unit recognition
•
•
Conductivity metering
–
Optional
Network interface for process documentation
•
•
Serial printer interface for process documentation
•
•
Remote service enabled
•
•
Electric door lock
•
•
Peak-load negotiation
•
•
1 x cold water, flow pressure
50–1000 kPa
200–1000 kPa
1 x cold water for steam condenser, flow pressure
50–1000 kPa
200–1000 kPa
1 x hot water, flow pressure
50–1000 kPa
200–1000 kPa
1 x demineralised water (AD). flow pressure
50–1000 kPa
50–1000 kPa
Feed pump for unpressurised demineralised water
Optional
Optional
4 inlet hoses ½" with ¾" threaded union, l = approx. 1.7 m
•
•
Drain pump DN 22, head height 100 cm
•
•
Steam condenser water drain (DN 22)
•
•
WaterProof System (WPS)
•
•
3 N AC 400 V 50 Hz, supply lead approx. 1.7 m, 5 x 2.5 mm²
•
•
Heating [kW]
9.0
9.0
Circulation pump [kW]
0.7
1.2
Total rated load [kW]
9.7
10.2
Fuse rating [A]
3 x 16
3 x 16
Controls/Programmes
Water connections
Electrical connection
PG 8535
5
Washer-disinfectors
PG 8535
PG 8536
Dispenser systems
1 dispenser pump for liquid acidic agents
• (Peristaltic pump)
• (Bellows-type pump)
1 dispenser pump for liquid detergent
• (Peristaltic pump)
• (Bellows-type pump)
1 connection for external DOS G10 or DOS G60 dispenser module
•
–
DOS S20 dispenser pump for neutralising agent and surfactant
–
Optional
DOS NA 120 dispenser pump for disinfectant or liquid detergent
Optional
Ultrasound flow control
–
•
Drawer for 2 x 5 l supply canisters
•
–
Drawer for 4 x 5 l supply canisters
–
•
•
–
–
•
•
•
Water softeners
for cold and hot water to max 70°C, Monobloc softener
for cold and hot water, max 70°C, large-capacity water softener
Steam condenser
Aerosol
Drying unit
Fan [kW]
0.3
0.3
Heater bank [kW]
2.3
2.3
Total rated load [kW]
2.6
2.6
Air throughput [m³/h]
60
60
Temperature selection in 1°C increments [°C]
60–115°C
60–115°C
Time selection in 1-minute increments [mins.]
1–240 mins.
1–240 mins.
Pre-filter EU 4, filter rating > 95%, filter life 100 h
•
•
•
•
Particulate filter/HEPA S-class filter H 13,
Filtration rate >99.992% (DIN EN 1822), life cycle 500 h
Dimensions/Weight
External dimensions H/W/D [mm]
820/900/700
1175/900/700
Cabinet dimensions H/W/D [mm]:
500/535/ O*=473, U*=516
500/535/ O*=473, U*=516
Weight [kg]
114
177
Stainless steel
Stainless steel
•
•
•
•
Casing
Stainless steel (AE)
Compliance with standards
DIN EN ISO 15883-1/2, EN 61010-2-40, EN 61326
Test certificates
VDE, VDE-EMC, MDD CE 0366, IP 20
*O = Upper basket, U = Lower basket, • = standard
PG 8536
53
54
Safety
through process reproducibility
The reproducible documentation of
reprocessing guarantees gap-free records
and allows the evaluation of reprocessing.
This represents a significant increase in
quality care for patients and for healthcare
workers as well. The careful documentation
of reprocessing gives the peace of mind
that comes from legal security.
Miele Professional now for the first time
is offering its own complete process
documentation package as part of
System4Med. The heart and soul of the
system is the Segosoft Miele Edition
documentation software. Depending on
the requirements of surgeries and onpremise conditions, various documentation
solutions are available. Miele machines
and their software are an ideal match and
interact perfectly.
The user-friendly Segosoft Miele Edition
allows full traceability and secure
documentation of processes on washerdisinfectors, small steam sterilisers and
heat-seal units. Traceability is guaranteed
by recording process protocols and
plotting temperatures and pressures information provided by the machine itself
via an interface. Alongside capturing this
process data, it is also possible to perform
daily routine tests or even accompany
each cycle with a test. This represents a
huge and convincing benefit compared
with manual documentation using forms
and templates.
The system also documents maintenance
intervals. Filter changes, for example,
can be documented along with further
replacement intervals. Consequently,
documentation represents a huge
contribution towards quality management
in surgeries and hospitals.
Digital documentation
National legislation requires that
documents are filed for up to 30 years.
Hence, paperless documentation
dispenses with considerable shelf space
for files. Electronic filing has become an
even more interesting proposition since
the introduction of enhanced digital
signatures, allowing documents to be
legally signed. This digital signature reveals
any subsequent changes to documents
and reliably prevents manipulation.
Documentation made simple
Segosoft Miele Edition excels in terms
of speed, simplicity and efficiency gains.
Once a Miele washer-disinfector or small
steam steriliser commences operation,
the software automatically logs all relevant
data during the reprocessing cycle. After
unloading and visual inspection, the user
can accept reprocessing results at a
computer and approve charges using a
user ID and password with no more than 2
mouse clicks. In all, the approvals process
takes less than 10 seconds.
Legal security
In the event that legal action is taken over
medical treatment, a reversal of the burden
of proof applies: The surgeon or hospital
must furnish proof that instruments were
hygienically reprocessed by keeping
records for up to 30 years. This proof can
best be provided on the basis of gap-free
and reproducible documentation of all
hygiene measures to refute allegations in
a court of law. Miele software also offers
legal security and meets the provisions of
the Robert Koch Institute guidelines and
medical ordinances.
SegoSoft Miele Edition:
Documents are created by the Segosoft
Miele Edition in PDF/A-1 format in
compliance with the ISO 19005-1:2005
standard. This format was specially
designed for long-term archiving and
ensures excellent legibility over time.
Digital signatures are created electronically
using a user name and password and do
not require any signature hardware.
Compared with flash card storage
systems processed using standard Office
programmes, Segosoft Miele Edition sets
standards in terms of the prevention of
manipulation and legal validity.
55
Process documentation options
Documentation of instrument reprocessing
can be performed in a variety of ways,
depending on surgeries' needs and on-site
conditions.
56
1. Electronic documentation:
Direct connection between PC and
machine
Miele washer-disinfectors or small steam
sterilisers are connected direct by cable
(up to 13 m long) to a computer on which
documentation software is installed. This
computer can be a netbook, laptop or PC
in the same room or an existing computer,
for instance, in a neighbouring office.
The serial connection on the machine can
be converted to USB using an adapter.
• Short distances and simple handling by
approving loads on-site.
• Most flexible approach to connecting two
or more units in hygiene room.
• Automatic data transfer from machine to
software.
• Digital archiving
2. Electronic documentation:
Network connection
Washer-disinfectors or small steam
sterilisers are connected to a surgery
network computer hosting documentation
software, e.g. central computer at
reception desk. Network integration of
machines with their serial interfaces is via a
network converter.
• Use of existing computer
• Automatic data transfer
from machine to software
• Digital archiving
3. Electronic documentation using
USB stick
Process data from washer-disinfectors
or small steam sterilisers can be saved
to a USB stick for subsequent transfer to
documentation software.
• Low level of investments in computer and
network infrastructure
• Use of existing computer
• Digital archiving
4. Process documentation via printer
Process data is printed using a receipt
printer in the hygiene room. The printouts
are filed.
Comparison of documentation options
Direct PC connection
Network connection
Documentation via USB
Printer
Documentation: Process protocol
•
•
•
•
Documentation: Temperature/pressure charts
•
•
•
–
Documentation: Routine checks
•
•
–
–
Documentation: Maintenance
•
•
–
–
Simple digital signature
–
–
•
–
Advanced digital signature with reference to user
•
•
Optional
–
Manual approval with signature
–
–
•
•
Digital approval with user name/password
•
•
Optional
–
Convenience of short distances
+++
++
++
+++
Paperless filing
•
•
•
–
Data backup function
•
•
–
–
Production of sterile supply labels
Optional
Optional
–
–
Legal security
•
•
•
•
Initial outlay
+++
++++
++
+
• = available – = not available + = evaluation scale
57
SegoSoft Miele Edition –
Products and accessories
SegoSoft Miele Edition:
Process documentation software
for direct PC connections or network
connections
Segosoft Miele Edition/USB solution
Process documentation software
for data transfer using USB stick
'Comfort Plus' package
with extended functionalities
• Documentation of process data,
routine checks, maintenance
• Advanced digital signature with reference
to user in PDF document
• User-referenced approval of process
protocols with user name and password
• User administration for any number of user
names/passwords
• Backup function for automatic data
backup
'Comfort' software package
with basic functionalities:
• Documentation of process data
• Simple digital signature
• User-referenced approval
on enclosed signature pad
• Optional: Software upgrade to
Comfort Plus, e.g. for digital approvals
with user name and password,
further functions, cf. Comfort Plus
software package
Scope:
• Software CD, Comfort Plus software
package, installation instructions
• Licence card for 1 machine
• Optional: Additional licence for further
units
• Free support
Free over-the-telephone installation
support for 30 days, software installation
and start-up instructions
Connectable model types:
• Serial connection: max. 4 machines
Network connection: Any number of
machines
Connection cables
to be ordered separately
58
Scope:
Complete package for 1 machine
• Software CD, Comfort software package,
installation instructions
• USB stick
• USB data logger
H x L x W: 31 x 90 x 109 mm,
incl. 230 V converter, 1.4 m supply lead
• Serial interface cable
to connect machine and data logger
(cable length: 3 m)
Connectable model types:
• max. 1 machine
• Optional: Connection of up to 5 machines
possible using software upgrade to
Comfort Plus
Net500 network converter
Net500 network converter for connection
of machines with serial interface to surgery
network, data conversion from RS 232 to
network format (TCP/IP)
Scope:
• Network converter
H x L x W: 31 x 90 x 109 mm
incl. 230 V converter, 1.4 m supply lead
PRT100 protocol printer
Printer to print process protocols, ink-jet
printer with indelible ink
Further additional components
To connect a machine to a PC, Miele offers
a range of approved cables. Miele can also
advise on the choice of suitable software
and hardware.
Fast labelling with
SegoLabel Miele Edition
Software for sterile supply labelling
With Segolabel Miele Edition software,
labels can be printed fast and sterile
supplies stored with an expiry date. The
labels are created after sterilisation using
a special printer and contain the cycle no,
date of creation, expiry date and the name
of the person responsible.
It is also possible to include information
on pouch contents. Labelling using a
barcode allows the fast assignment
of process data to patients' records,
providing uninterrupted traceability from
reprocessing to use on patients.
SegoLabel Miele Edition:
Starter kit
Complete package consisting of hard- and
software to create sterile supply labels.
Miele recommends the use of SegoLabel in
combination with SegoSoft Miele Edition.
Scope:
• Software CD, installation instructions
• PRT 200 label printer
incl. converter (cable length: 3.8 m)
and USB cable (length 2 m)
• 1 roll of labels, 1,000 off, and colour
ribbon (both also available from Miele as
accessories)
59
60
Miele Sales and Service –
A full range of benefits
Miele washer-disinfectors and small steam
sterilisers set standards in instrument
reprocessing in surgeries and outpatient
units. Miele Sales and Service with its
blanket geographical coverage and fast
on-site repairs guarantee comprehensive
peace-of-mind support, perfectly
complementing System4Med.
Sound advice from the very beginning
Miele's advisory service sets in long before
machines are installed. Miele specialists
provide expert support in helping select
the most appropriate machines and assist
in performing extensive feasibility studies.
Where needed, Miele also offers financing
models.
• Advice on machine selection
• Economic feasibility calculations
• Attractive financing
Comprehensive service package from
one single source
Even as early as when a new machine
is delivered, Miele supports clients by
providing a comprehensive range of
services. From the word 'go', work is
performed on site with due care and
diligence and in full compliance with
relevant legislation by carefully trained
Miele service engineers.
Your benefits:
• High-quality service with short response
times and blanket service coverage for
Miele medical products is provided by
specialised service engineers (e.g. over
150 technicians in Germany alone)
• Short call-out distances and on-site
repairs are generally guaranteed within
24 hours.
• Expert application technology advice
• 90% of service calls result in first-time
fixes
• Reliable spares service (even as long
as 15 years after the discontinuation
of series production in the case of key
functional spares)
Customised service contracts
Miele's inspection and maintenance
contracts ensure that Miele machines are
inspected at regular intervals by specially
trained Miele after-sales service engineers.
The proper functioning and safety of all
key components is analysed. Machine
uptime and smooth operation is ensured by
replacing spare parts at an early juncture.
This considerably minimises any downtime
risk.
Inspections and preventative maintenance
help ensure that machines retain their value
and represent a good long-term investment.
Miele offers the following service
contracts:
Inspection contract
An inspection contract covers the following:
• Annual inspection incl. comparison of
readings
• Detailed assessment and documentation
of technical state of repair
• Maintenance check
• Electrical safety check
• Thermoelectric test
Maintenance contract
In addition to the services provided by the
inspection contract, a maintenance contract
offers the following benefits:
• Extensive maintenance based on
specific Miele service plan for the model
concerned
• Offers submitted for further preventative
maintenance and repair work
• Pre-emptive replacement of defined highmortality parts
• Necessary safety checks
Validated performance
Miele also offers a series of process
checks performed by highly qualified Miele
medical product engineers in accordance
with the relevant legislation and standards
as well as national guidelines and goodpractice recommendations:
• Initial validation consists of installation,
operation and performance qualification
after machine installation
• Revalidation (repeat performance
qualification) is generally necessary every
12 months, after maintenance, repairs or
after any modifications to installation or
operation parameters.
• Performance qualification for washerdisinfectors, taking into consideration the
fact that mainly semi-critical instruments
are reprocessed in surgeries and
outpatient units.
Professional organisations and inspection
authorities are able to provide information
on which type of check is sufficient.
It is not without reason that Miele's
after-sales service operation has been
acclaimed for many years in succession
for its service excellence (in an annual
survey performed by ServiceBarometer
AG, Munich).
Should further repair work be necessary,
this is invoiced separately.
Rechnung gestellt.
Full-service maintenance contract
Miele's full-maintenance contract offers
good financial forward visibility. In addition
to the services provided under the
maintenance contract, it also covers the
costs of any necessary repairs. The cost of
spares, parts subject to wear and tear, callout charges and labour costs are assumed
by Miele
61
62
63
Miele Australia Pty Ltd
1 Gilbert Park Drive
Knoxfield VIC 3180
Tel: 1300 4 MIELE (464 353)
www.miele-professional.com.au
info@miele-professional.com.au
Miele worldwide:
AUSTRALIA
Miele Australia Pty. Ltd.
1 Gilbert Park Drive
Knoxfield, VIC, 3180
Tel. 1300 464 353
Fax +613 9764 7129
AUSTRIA
Miele Gesellschaft mbH.
Mielestraße 1
5071 Wals/Salzburg
Tel. +43 50 800-81 481
Telefax +43 50 800-81 429
BELGIUM
N.V. Miele S.A.
z.5 Mollem 480
Hof te Bollebeeklaan 9
1730 Mollem
Tel. +32 2451 14 11
Telefax +32 2451 14 14
ESTONIA
Miele SIA Eesti filiaal
A.H. Tammsaare tee 47
11316 Tallinn
Tel. +371 2922 3571 FINLAND
Miele Oy
Porttikaari 6
01200 Vantaa
Tel. +3589 87 59 70
Telefax +3589 87 59 72 99
FRANCE
Miele S.A.S.
9 avenue Albert Einstein
93151-Le Blanc-Mesnil (Paris)
Tel. +33(0)1/49 39 34 44
Telefax +33(0)1/49 39 44 38 CANADA
Miele Limited
161 Four Valley Drive
Vaughan, ON L4K 4V8
Tel. +1 905 532 2270
Telefax +1 904 532-2290
GERMANY
Miele & Cie. KG
Vertriebsgesellschaft Deutschland
Carl-Miele-Str. 29
33332 Gütersloh
Tel. 0800 22 44 644*
Telefax 0800 33 55 533*
*Only in Germany CHILE
Miele Electrodomesticos Ltda.
Nueva Costanera 4055
Vitacura
Santiago de Chile
Tel. +56 2 95700-00
Telefax +56 2 95700-79
GREAT BRITAIN
Miele Co. Ltd.
Fairacres
Marcham Road, Abingdon
Oxon OX14 1TW
Tel. 0845 330 3618
Telefax 01235 405636
CHINA
Miele (Shanghai) Trading Ltd
Beijing Branch
3F South Tower, Kerry Center
1 Guang Hua Road
Chaoyang District
100020 Beijing
Tel. +86 10 5783 2688
Telefax +86 10 5783 2600
GREECE
Miele Hellas E.P.E.
Mesogion 257
154 51 N. Psychiko-Athens
Tel. national 01/10 6 79 44 44
international 00 30/2/10 6 79 44 44
Telefax 01/10 6 79 42 09
international 00 30/2/10 6 79 42 09
Miele (Shanghai) Trading Ltd.
1-3 Floor, No. 82 Shi Men Yi Road,
Jing An District
200040 Shanghai PRC
Tel. +86 21 6135 3559
Telefax +86 21 6135 3993 CROATIA
Miele trgovina i servis d.o.o.
Buzinski prilaz 32
10000 Zagreb
Tel. +385/1/66 89 000
Telefax +385/1/66 89 090
CZECH REPUBLIC
Miele spol. s.r.o.
Holandská 4
63900 Brno
Tel. +420 5 4 35 53-1 11
Telefax +420 5 4 35 53-1 19
DENMARK
Miele A/S
2600 Glostrup, Erhvervsvej 2
Tel. +45 43 27 11 00
Tel. Salg/Professional
+45 43 27 15 00
Tel. Jylland +45 97 12 70 66
Telefax hovednr. +45 43 27 11 09
Telefax Salg/Professional
+45 43 27 15 09 ITALY
Miele Italia S.r.l.
Strada di Circonvallazione, 27
39057 S. Michele-Appiano (BZ)
Tel. +39 04 71/66 61 11
Telefax +39 04 71/66 63 50
NEW ZEALAND
Miele New Zealand Ltd.
8 College Hill, Freemans Bay
Auckland 1060
Tel. 0800 464 353
Fax +64 9573 1268
SPAIN
Miele S.A.U.
Avda. de Bruselas, 31
28108 Alcobendas (Madrid)
Tel. +34/91/6 23 20 00
Telefax +34/91/6 62 02 66
JAPAN
Miele Japan Corp.
Meguro Yamate Place 9F
2-10-11 Meguro
Meguro-ku, Tokyo
153-0063 Japan
Tel. +81(3)5740-0034
Telefax +81(3)5740-0035 NORWAY
Miele AS
Nesbruveien 71
1394 NESBRU
Tel. +47/67 17 31 00
Telefax +47/67 17 31 10
SWEDEN
Miele AB
Industrivägen 20
Box 1397
171 27 Solna
Tel. +46 85 62 29-000
Telefax +46 85 62 29-209
KAZAKHSTAN
Miele LLP
Building 1B (office 602)
Al-Farabi Pr. 13
050059 Almaty
Tel. +7 727 3111141
Telefax +7 727 3111042
KOREA
Miele Korea Limited
Miele House 8 fl.,
607-10 Yeoksam-dong
Gangnam-gu
Seoul 135-080
Tel. +82 2 3451 9333
Telefax +82 2 3451 9399
LATVIA
Miele SIA
Zaubes Str. 9A-38
1013 Riga
Tel. +371 66016600
Telefax +371 67889879
LITHUANIA
SIA “Miele” Lietuvos filialas
Laisvės pr. 125
06118 Vilnius
Tel. +371 29223521 HUNGARY
Miele Kft.
Alsó Törökvész út 2.
1022 Budapest
Tel. +36 1 8806-400
Telefax +36 1 8006-402
LUXEMBOURG
Miele s.à r.l.
20, Rue Christophe Plantin
2339 Luxembourg
Tel. +352/4 97 11-25
Telefax +352/4 97 11-39 HONG KONG
Miele (Hong Kong) Ltd.
41/F - 4101, Manhattan Place
23 Wang Tai Road,
Kowloon Bay
Tel. +852/2610 1331
Telefax +852/3579 1404
MALAYSIA
Miele Sdn Bhd
Suite 12-2, Level 12
Menara Kencana Petroleum
Solaris Dutamas
No. 1, Jalan Dutamas 1
Kuala Lumpur 50480
Tel. +603 6209 0288
Telefax +603 6205 3768 INDIA
Miele India Pvt. Ltd.
1st Floor,
Copia Corporate Suites,
Plot No. 9, Jasola,
New Delhi – 110025
Tel. +91 (0)11 469000-00
Telefax +91 (0)11 469000-01
IRELAND
Miele Ireland Ltd.
2024 Bianconi Avenue
Citywest Business Campus
Dublin 24
Tel. +3531 461 07 10
Telefax +3531 461 07-97
An active contribution towards protecting the environment:
This brochure is printed on paper bleached without the use of chlorine
MEXICO
Miele S.A. de C.V.
Av. Santa Fé 170
German Centre 0-4-2
Col. Lomas de Santa Fé
C.P. 01210 México, D.F.
Tel. +52/55 85 03 98 70
Telefax +52/55 85 03 98 74 NETHERLANDS
Miele Nederland B.V.
De Limiet 2
4131 NR Vianen
Tel. +31 3 47/37 88 83
Telefax +31 3 47/37 84 29
POLAND
Miele Sp. z. o. o.
ul. Gotarda 9
02-683 Warszawa
Tel. +48 22/5 48 40 00
Telefax +48 22/5 48 40 10
PORTUGAL
Miele Portuguesa, Lda.
Av. do Forte, 5
2790-073 Carnaxide
Tel. +351/21/42 48-100
Telefax +351/21/42 48-109
ROMANIA
Miele Appliances SRL
Intrarea Narciselor 8
Otopeni
Jud. Ilfov
Tel. +40 21 3520777
Telefax +40 21 3520776
RUSSIA
000 Miele CIS
Leningradsky Prospekt, 31A, bld. 1
125284 Moscow
Tel. +7 495 745-8992
Telefax +7 495 745-8680
SERBIA
Miele d.o.o. Beograd
Balkanska 2
Beograd – Stari Grad 11000
Tel. +381 11 2055060
Telefax +381 11 2055065
SINGAPORE
Miele Pte. Ltd.
163 Penang Road
#04-02/03 Winsland House II
Singapore 238463
Tel. +65/67 35 11 91
Telefax +65/67 35 11 61
SLOVAKIA
Miele s. r. o.
Plynárenská 1
82109 Bratislava
Tel. +421/2/58 10 31 11
Telefax +421/2/58 10 31 19 SWITZERLAND
Miele AG
Limmatstr. 4
8957 Spreitenbach
Tel. +4156 4 17 20 00
Telefax +4156 4 17-24 69
TURKEY
Miele Elektrikli Aletler
Dıs¸. Tic. ve Paz. Ltd. S¸ ti.
Güvercin Sokak No. 10
34330 Levent-Istanbul
Tel. +90/2 12/3 86-08 00
Telefax +90/2 12/3 25 84 49
UKRAINE
Miele LLC
Zhylyanskaya Str. 48, 50 A
01033 Kiev
Tel. +38 044 4960300
Telefax +38 044 4942285
UNITED ARAB EMIRATES
Miele Appliances Ltd.
Gold & Diamond Park
Sheikh Zayed Road
Building No. 6,
Offices No. 219
Dubai
Tel. +971 4 3418444
Telefax +971 4 3418852
USA
Miele, Inc.
9 Independence Way
Princeton, NJ 08540
Tel. 001-609/419 43 74
Telefax 001-609/419 18 53 OTHER COUNTRIES:
Sales International
Miele & Cie. KG
Carl-Miele-Straße 29
33332 Gütersloh
Tel. +49(0)52 41-89 15 07
Telefax +49(0)52 41-89 15 00
SLOVENIA
Miele d.o.o.
Brncˇicˇeva ulica 41 g
1231 Ljubljana – Črnuče
Tel. +386 1563 44-80
Telefax +386 1563 44-90
SOUTH AFRICA
Miele (Pty) Ltd.
63 Peter Place
Bryanston 2194
Tel. +27(0)11/875-9000
Telefax +27(0)11/875-9035
© Miele & Cie. KG, Gütersloh / Mat. no. 9 908 680 / FM 14-0170 / All rights reserved - 06/14