SGH-E890
User’s Guide
Drive safely at all times
Do not use a hand-held phone while driving. Park
the vehicle first.
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using
them in an aircraft is both illegal and dangerous.
Switch off the phone near all medical
equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules
in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Accessories and batteries
Meet any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger.
Use only Samsung-approved batteries and
accessories, such as headsets and PC data cables.
Use of any unauthorized accessories could damage
you and your phone and may be dangerous.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Emergency calls
Key in the emergency number for your present
location, then press
.
Keep your phone away from small children
Keep the phone and all its parts, including
accessories, out of the reach of small children.
Important safety precautions
Be aware of special regulations
• The phone could explode if the battery is
replaced with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
At very high volumes, prolonged listening
to a headset can damage your hearing.
Qualified service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see "Health
and safety information" on page 131.
1
About this Guide
This User’s Guide provides you with condensed
information about how to use your phone. To
quickly learn the basics for your phone, please refer
to “Get started” and “Step outside the phone.”
In this guide, the following instruction icons
appear:
Indicates that you need to pay careful
attention to the subsequent information
regarding safety or phone features.
Indicates that you need to press the
Navigation keys to scroll to the specified
option and then select it.
→
[
]
< >
2
Indicates that you can get more
information on the referenced page.
Indicates a key on the phone.
For example, [
]
Indicates a soft key, whose function is
displayed on the phone screen. For
example, <Menu>
• Camera and camcorder
Use the camera module on your
phone to take a photo or record
a video.
Special features of your phone
• Music player
Play music files using your
phone as a music player.
• Bluetooth
Transfer media files and
personal data and connect to
other devices using free,
wireless Bluetooth technology.
• Digital data printing
Print images, messages, and
other personal data directly
from your phone.
• Multimedia Message Service
(MMS)
Send and receive MMS
messages with a combination of
text, images, video, and audio.
• Offline mode
Switch your phone to use its
none-wireless function in an
airplane.
Special features of your phone
• Phone to TV
View photos and video clips
captured with the phone on
your TV screen.
• E-mail
Send and receive e-mails with
image, video, and audio
attachments.
• Java
Enjoy Java™-based embedded
games and download new
games.
• Alarm
Use your phone as an alarm
clock to wake you up in the
morning or notify you of an
impending event.
3
Contents
Unpack
6
Make sure you have each item
Your phone
6
Keys, features, and locations
Get started
7
First steps to operating your phone
Install and charge the phone ................................. 7
Power on or off.................................................... 8
Keys and display.................................................. 9
Access menu functions ....................................... 12
Use the stylus pen ............................................. 13
Customise your phone ........................................ 14
Make/Answer calls ............................................. 17
Step outside the phone
18
Begin with your camera, the web, and other special
features
Use the camera ................................................. 18
4 Play music files.................................................. 19
Browse the web .................................................
Use Phonebook..................................................
Send messages .................................................
View messages ..................................................
Send an SOS message........................................
Use Bluetooth wireless........................................
Watch the phone display on a TV .........................
Use a memory card ............................................
20
21
23
25
26
27
28
30
Enter text
32
Handwriting, Keypad, and Keyboard modes
Call functions
38
Advanced calling features
Menu functions
43
All menu options listed
Solve problems
129
Help and personal needs
Health and safety information
131
Index
140
Overview of menu functions
To access Menu mode, select <Menu> in Idle mode.
1 Call log
p. 43
3 Applications (continued)
5 Messages (continued)
1
2
3
4
5
6
7
p.
p.
p.
p.
p.
p.
p.
3
4
5
6
7
8
9
5
6
7
8
Recent contacts
Missed calls
Dialled calls
Received calls
Delete all
Call time
Call costs1
43
44
44
44
44
45
45
Image editor
Bluetooth
Java world
Games
Dictionary
PenMemo
SIM-AT1
p.
p.
p.
p.
p.
p.
p.
57
59
62
63
63
65
67
2 Phonebook
p. 46
4 Browser
p. 67
1
2
3
4
5
6
7
8
9
p.
p.
p.
p.
p.
p.
p.
p.
p.
1
2
3
4
5
6
p.
p.
p.
p.
p.
p.
Contact list
FDN contacts1
Create contact
Group
Speed dial
My namecard
Own number
Management
Service number1
46
47
47
49
49
50
51
51
51
3 Applications
p. 52
1 Music player
2 Voice recorder
p. 52
p. 55
Home
Bookmarks
Enter URL
Clear cache
Profile settings
Current profile
67
69
69
69
70
71
5 Messages
p. 71
1
2
3
4
p.
p.
p.
p.
Create new message
My messages
Templates
Delete all
71
76
82
83
Settings
SOS message
Broadcast messages
Memory status
p.
p.
p.
p.
83
90
91
92
8 Camera
p. 108
1
2
3
4
p.
p.
p.
p.
Take a photo
Record video
Go to My photos
Go to My video clips
108
112
114
115
6 My files
p. 92
9 Settings
p. 115
1
2
3
4
5
6
7
p.
p.
p.
p.
p.
p.
p.
1 Time and date
2 Phone settings
3 Display settings
4 Sound settings
5 Touch settings
6 Light settings
7 Network services
8 Security
9 Memory status
10 Reset settings
11 Key management
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
Images
Videos
Music
Sounds
Other files
Memory card2
Memory status
93
94
96
96
97
98
99
7 Planner
p. 99
1
2
3
4
5
6
7
8
p.
p.
p.
p.
p.
p.
p.
p.
Alarm
Calendar
Memo
World clock
Calculator
Convertor
Timer
Stopwatch
115
115
118
119
121
121
122
125
127
127
128
99
100
104
105 1. Shows only if supported by
your SIM card.
106
106 2. Shows only if a memory card
is inserted into the phone.
107
5
107
Unpack
Make sure you have each item
• Phone
• Travel adapter
• Battery
• User’s Guide
You can obtain various accessories
from your local Samsung dealer.
The items supplied with your phone
and the accessories available at your
Samsung dealer may vary,
depending on your country or service
provider.
Your phone
Keys, features, and locations
Camera
Earpiece
Camera key
Display
Memory
card slot
Navigation keys
(Up/Down/
Left/Right)
Volume keys
Left soft key
Dial key
Microphone
6
Hold key
Headset/
Adapter jack
Web access/
Confirm key
Right soft key
Power on/off/
Menu exit key
Cancel/Delete key
Get started
First steps to operating your phone
SIM card information
When you subscribe to a cellular network, you
receive a plug-in SIM (Subscriber Identity
Module) card loaded with your subscription
details, such as your PIN, and available optional
services.
Insert the SIM
card.
Make sure that the
gold-coloured
contacts are face
down.
Install the battery.
Install and charge the phone
Remove the battery
cover.
If the phone is
already on, first turn
it off by pressing and
holding [
].
Reattach the
battery cover.
7
Get started
Plug the travel
adapter into the
phone.
Plug the adapter into a standard AC power
outlet.
Low battery indicator
When the battery is low:
• a warning tone sounds,
• the low battery message displays, and
• the empty battery icon
blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
Power on or off
When the phone is completely charged
(the battery icon becomes still), unplug the
adapter from the power outlet.
Remove the
adapter from the
phone.
8
Switch on
1. Press and hold [
Do not turn on
the phone when
mobile phone
use is prohibited.
2. If necessary, enter the
PIN and select <OK>.
Switch off
Press and hold [
].
].
Key Lock mode
Offline mode
You can switch the phone to Offline mode, in
which the phone functions requiring network
connection are deactivated. This mode is helpful
when you want to use your phone in a place
where you are not allowed to use mobile
devices, such as in an airplane and at a
hospital.
To switch to Offline mode, select <Menu> →
Settings → Phone settings → Offline mode
→ On.
In Offline mode, you can use non-wireless
functions, such as games, calendar, camera,
and music player.
Keys and display
Get started
When you press and hold [HOLD], the key lock
feature locks the exposed keys to prevent
accidental key presses from affecting phone
operations.
To unlock the keypad, press and hold [HOLD].
Keys
Perform the function indicated on the
bottom line of the display.
In Idle mode, access your favourite
menus directly.p. 116
In Menu mode, scroll through menu
options.
In Idle mode, launch the web
browser.
In Menu mode, select the highlighted
menu option or confirm input.
Send or answer a call.
In Idle mode, retrieve numbers
recently dialled, missed, or received.
Delete characters from the display or
items in an application.
9
Get started
Press and hold to switch the phone
on and off.
End a call.
In Menu mode, cancel input and
return the phone to Idle mode.
Display
Layout
Icons
display various icons.
Text and graphics
display messages,
instructions, and
information you enter.
Adjust the phone volume.
In Idle mode, adjust the key tone
volume.
In Menu mode, scroll through the
menu options.
In Idle mode, access the Camera
menu. Press and hold to turn on the
camera.
In Camera mode, take a photo or
record a video.
In Idle mode, lock the exposed keys
when held down.
10
Menu
Icons1
Contacts
Soft key function
indicators
show the current
functions assigned to
the soft keys.
Received signal strength
Call in progress
Out of your service area; you
cannot make or receive calls
SOS message feature
activep. 90
Roaming network
Music playback in progress
Music playback paused
Memory card inserted
p. 31
Silent mode (Vibration)
Silent mode (Mute)
Ringer typep. 119
•
: Melody
•
: Vibration
•
: Melody and vibration
•
: Vibration then
melody
•
: Melody then
vibration
Battery power level
Get started
Alarm setp. 99
New text message
New multimedia message
New e-mail
New voicemail
One of the message Inboxes
is full
Call diverting feature active
p. 122
Bluetooth activep. 59
Syncshronised with a PC
GPRS network
EDGE network
Home zone, if registered for
the appropriate service
Office zone, if registered for
the appropriate service
1. You can select some icons by tapping. Tap an icon
to open a message or change settings.
11
Get started
Access menu functions
Use the
soft keys
The roles of the soft keys vary
depending on the function you
are using. The bottom line of the
display indicates their current
role.
Select
Press the left soft
key to select the
highlighted option.
12
Back
Press the right
soft key to return
to the previous
menu level.
Select an
option
By tapping on the touch screen:
Your phone’s display is a touch
screen which can recognise when
you touch items displayed on it.
1. Tap a desired soft key
indicator.
2. To scroll up or down or side
to side:
• Tap the left or right arrow
to scroll left or right.
• Tap and drag the scroll bar
to scroll up or down.
3. Tap a desired option or
function.
Use the stylus pen
A stylus pen is supplied with your phone to let
you tap and write on the touch screen.
1. Remove the stylus pen cover.
Get started
By pressing the soft keys and
Navigation keys:
1. Press a desired soft key.
2. Press the Navigation keys to
move to the next or previous
option.
3. Choose <Select> or press
[
] to confirm the
function displayed or option
highlighted.
4. To exit, choose either of the
following methods.
• Select <Back> to move up
one level.
• Press [ ] to return to Idle
mode.
2. Expand the stylus pen.
From the screen supporting
<Options>, you can open an
option list by tapping and
holding an item.
13
Get started
3. Use the stylus pen, holding it as you would
with a pen or pencil.
• Always use a Samsung authorised stylus
pen for tapping or for making strokes on
the phone screen. Never use an actual
pen, pencil, or other sharp object to write
on the phone screen as this will scratch
the screen.
• Do not push or tap the screen strongly
with the stylus pen.
14
Customise your phone
Display
language
Call ringer
melody
1. In Idle mode, select
<Menu> → Settings →
Phone settings →
Language.
2. Select a language.
1. In Idle mode, select
<Menu> → Settings →
Sound settings →
Incoming call → Ring
tone.
2. Select a ringtone category.
3. Select a ringtone.
4. Select <Save>.
Menu
mode skin
colour
You can set wallpaper for the
idle screen on the display.
1. In Idle mode, select
<Menu> → Settings →
Display settings →
Wallpaper → Wallpaper.
2. Select an image category.
3. Select an image.
4. Select <Save>.
Menu
shortcuts
You can set the Navigation keys
to function as shortcuts to
access your favourite menus.
1. In Idle mode, select
<Menu> → Settings →
Phone settings →
Shortcuts.
2. Select a key.
3. Select a menu to be
assigned to the key.
Get started
Idle mode
wallpaper
You can change the colour for
the display components, such
as title bars and highlight bars.
1. In Idle mode, select
<Menu> → Settings →
Display settings → Skin.
2. Select a colour pattern.
15
Get started
Shortcut
icons
Silent mode
16
You can set up a menu for your
own favourite menu items.
To set a shortcut item:
1. In Idle mode, select
<Menu> → Settings →
Phone settings → Idle
shortcuts.
2. Select an item.
3. Select <Save>.
To access a shortcut item:
In Idle mode, select the desired
item.
You can switch the phone to
Silent mode to avoid disturbing
other people.
In Idle mode, select
and tap
and hold .
Phone lock
You can protect the phone
against unauthorised use with a
phone password. The phone will
require the password
on power-up.
1. In Idle mode, select
<Menu> → Settings →
Security → Change
password.
2. Enter the default password,
00000000, and select
<OK>.
3. Enter a new 4-digit to
8-digit password and select
<OK>.
4. Enter the new password
again and select <OK>.
Adjust the
volume
during a
call
Press [ / ].
Get started
5. Select Phone Lock.
6. Select Enable.
7. Enter the password and
select <OK>.
Make/Answer calls
Make a call
Answer a
call
1. In Idle mode, select
.
2. Enter an area code and
phone number.
3. Tap
or press [
].
4. To end the call, press [ ].
1. When the phone rings,
press [
].
2. To end the call, press [
].
17
Step outside the phone
Begin with your camera, the web, and other special
features
View a
photo
Use the camera
Take a
photo
18
1. In Idle mode, press and
hold [Camera] to turn on
the camera.
2. Aim the lens at the subject
and make any desired
adjustments.
3. Select
on the bottom of
the display or press [
]
or [Camera] to take a
photo. The photo is saved
automatically.
4. Select <Back> to take
another photo.
Record a
video
1. In Idle mode, select
<Menu> → My files →
Images → My photos.
2. Select the photo you want.
1. In Idle mode, press and hold
[Camera] to turn on the
camera.
2. Select
on the top line of
the display to switch to Record
mode.
3. Select
at the bottom of the
display, or press [
] or
[Camera] to start recording.
4. Select < > or press
[Camera] to stop
recording.The video is saved
automatically.
5. Select <
> to record
another video.
1. In Idle mode, select
<Menu> → My files →
Videos → My video clips.
2. Select the video clip you
want.
Create a
play list
Play music files
Copy music
files to the
phone
Use these methods:
• Download from the wireless
webp. 67
• Download from a computer
using Samsung PC studio
Samsung PC studio
User’s guide
• Receive via Bluetooth
p. 62
• Copy to a memory card and
insert the card into the
phonep. 31
Play music
files
1. In Idle mode, select
<Menu> → Applications
→ Music player.
2. Select <Options> → Add
music from → Phone or
Memory card.
3. Select the files you want →
<Add>.
1. From the music player
screen, select
or press
[
].
2. During playback, use the
following keys and icons:
•
/
: pauses
playback.
•
/
: resumes
playback.
• Up: opens the current
album list.
19
Step outside the phone
Play a
video
Step outside the phone
Play music
files
(continued)
• Left: returns to the
previous file. Moves
backward in a file when
held down.
• Right: skips to the next
file. Skips forward in a file
when held down.
•
/ : adjusts the
volume.
3. Press [Down] to stop
playback.
Browse the web
Using the built-in web browser, you can easily
access the wireless web to get a variety of
up-to-date services and information and to
download web content.
20
Launch the
web
browser
Navigate
the web
In Idle mode, press [
•
•
•
•
•
].
To scroll through browser
items, press [Up] or
[Down].
To select an item, select
<
> or press [
].
To return to the previous
page, select <Back> or
press [C].
To return to the homepage,
press and hold [C].
To access browser options,
select
.
Use Phonebook
To the SIM card:
1. In Idle mode, select
.
2. Enter a phone number and
press [
].
3. Select SIM → New.
4. Tap the text input field.
5. Enter a name and press
[
].
6. Select <Save> to save the
contact.
Step outside the phone
Add a
contact
To the phone’s memory:
1. In Idle mode, select
.
2. Enter a phone number and
].
press [
3. Select Phone → New → a
number type.
4. Specify the contact
information: First name,
Last name, Mobile, Home,
Office, Fax, Other, Email,
Graphic ID, Ringtone,
Group, Anniversary, and
Notes.
5. Select <Options> → Save
to save the contact.
21
Step outside the phone
Find a
contact
22
1. In Idle mode, select
<Contacts>.
2. Select <Change>.
3. Enter the first few letters of
the name you want and
press [
].
4. Select a contact.
5. Scroll to a number and
press [
] to dial, or
[
] to edit the contact
information.
Create and
send a
name card
1. In Idle mode, select
<Menu> → Phonebook →
My namecard.
2. Specify your contact
information.
3. Select <Options> → Save
to save the name card.
4. To send the name card,
select <Options> → Send
via → a sending method.
Send messages
Send a
multimedia
message
(MMS)
1. In Idle mode, select
<Menu> → Messages →
Create new message →
Multimedia message.
2. Select Subject.
3. Enter the message subject
and press [
].
4. Select Image or video or
Music or sound.
5. For Image or video, select
Add image or Add video
and add an image or a video
clip.
For Music or sound, select
Add music or Add sound
and add a music file or a
sound clip.
Step outside the phone
Send a text
message
(SMS)
1. In Idle mode, select
<Menu> → Messages →
Create new message →
Text message.
2. Enter the message text and
].
press [
3. Select a destination field.
4. Enter a destination number
].
and press [
5. Select <Options> → Send
to send the message.
23
Step outside the phone
Send a
multimedia
message
(MMS)
(continued)
24
6. Select Text.
7. Enter the message text and
press [
].
8. Select <Options> → Send.
9. Select a destination field.
10. Enter a destination number
or an e-mail address and
].
press [
11. Select <Options> → Send
to send the message.
Send an
e-mail
1. In Idle mode, select
<Menu> → Messages →
Create new message →
Email.
2. Select Subject.
3. Enter the e-mail subject and
press [
].
4. Select Message.
5. Enter the e-mail text and
].
press [
6. Select File attach.
7. Add image, video, sound,
music files, or document
files.
8. Select <Options> → Send.
9. Select a destination field.
View messages
View a text
message
When a notification appears:
1. Select <View>.
2. Select the message from
the Inbox.
View a
multimedia
message
When a notification appears:
1. Select <View>.
2. Select the message from
the Inbox.
Step outside the phone
10. Enter an e-mail address and
].
press [
11. Select <Options> → Send
to send the e-mail.
From the Inbox:
1. In Idle mode, select
<Menu> → Messages →
My messages → Inbox.
2. Select the MMS message
(
).
From the Inbox:
1. In Idle mode, select
<Menu> → Messages →
My messages → Inbox.
2. Select the text message
( ).
25
Step outside the phone
View an
e-mail
1. In Idle mode, select
<Menu> → Messages →
My messages → Email
inbox.
2. Select Check new mail.
3. Select an e-mail or header.
4. If you selected a header,
select <Options> →
Retrieve to view the body
of the e-mail.
Send an SOS message
You can send an SOS message to your family or
friends for help in an emergency.
Set up SOS
message
options
1. In Idle mode, select
<Menu> → Messages →
SOS message.
2. Select Yes on the Message
sending field.
3. Select Recipients.
4. Select a destination field.
5. Enter the phone number to
which you want to send the
SOS message and select
<Save>.
6. Select <Options> → Save
to save your settings.
26
In Idle mode, press [ / ] 4
times when the keypad is
locked.
The phone sends the SOS
message.
Use Bluetooth wireless
Your phone is equipped with Bluetooth
technology, enabling you to connect the phone
wirelessly to other Bluetooth devices and
exchange data with them, talk hands-free, or
control the phone by remote control.
Turn on
Bluetooth
In Idle mode, select <Menu>
→ Applications → Bluetooth
→ Activation → On.
Search for
and pair
with a
Bluetooth
device
1. In Idle mode, select
<Menu> → Applications
→ Bluetooth → My
devices → Search new
device.
2. Select a device.
3. Enter a Bluetooth PIN or
the other device’s Bluetooth
PIN, if it has one, and select
<OK>.
When the owner of the
other device enters the
same code, pairing is
complete.
Step outside the phone
Send the
SOS
message
27
Step outside the phone
Send data
28
1. Access an application,
Phonebook, My files,
Calendar, or Memo.
2. Select the item you want to
send.
3. Select <Options> → Send
via → Bluetooth.
4. For Phonebook, select
which data you want to
send.
5. Select a device.
6. If necessary, enter the
Bluetooth PIN and select
<OK>.
Receive
data
1. When a device attempts to
access your phone, select
<Yes> to permit the
connection.
2. If necessary, select <Yes>
to confirm that you are
willing to receive.
Watch the phone display on a TV
You can view the display of your phone on a TV
screen by connecting the phone and TV with a
TV out cable. This enables you to enjoy the
photos, videos and music stored in the phone’s
memory with your family or friends on a larger
screen.
• Depending on your particular
TV model, the location and
shape of the video input and
audio output ports may vary.
Match cable connector and
TV port colours.
• Depending on the video
system, the image may
vibrate or in some other way
be less than optimal.
• Depending on the video
quality, some video clips
may not display.
• You cannot use a Bluetooth
stereo headset or the
zooming feature in TV Out
mode.
• You cannot use the touch
feature in TV Out mode.
Transfer
phone
display to
a TV
1. With the TV switched on,
connect your phone to the
TV with a TV out cable, as
shown.
Step outside the phone
Important
TV
information
2. Switch the TV to External
Input mode.
The display switches to TV
Out mode and you can view
the phone’s display on the
TV screen.
3. If necessary, set the video
system for your TV in the
TV-out.p. 119
29
Step outside the phone
4. Access the application you
want and open files.
Use a memory card
You can use a memory card to increase your
phone’s memory capacity.
Important
memory
card
information
30
• Frequent erasing and writing
will shorten a memory card’s
lifespan.
• Do not remove a memory
card from the phone or turn
off the phone while data is
being accessed or
transferred. This could result
in loss of data and/or
damage to the card or
phone.
• Do not subject memory
cards to strong shocks.
• Do not touch memory card
terminals with your fingers
or metal objects. If dirty,
wipe the card with a soft
cloth.
• Keep memory cards away
from small children or pets.
• Do not expose cards in a
place subject to electrostatic discharge and/or
electromagnetic
interference.
• Some memory cards may
not be compatible with your
phone, depending on the
size of the memory card.
1. Insert a memory card into
the memory card slot, with
the label side face down.
2. Press the card until it locks
into place.
Remove the
memory
card
Use a card
adapter
Using a card adapter and a
USB card reader/writer, you
can read the card on a PC.
1. Insert a memory card into
a card adapter, and then
the adapter into a card
reader/writer.
2. Plug the USB connecter of
the card reader/writer into
the USB port on your PC.
3. Access the appropriate
memory disk and copy to
and from the card.
Step outside the phone
Insert a
memory
card
1. Press the memory card so
that it is disengaged from
the phone.
2. Remove the card from the
slot.
31
Enter text
Handwriting, Keypad, and Keyboard modes
You can enter text in some features, such as
Messages, Phonebook, or Calendar, using
English mode, T9 mode, Number mode, and
Symbol mode.
Changing the text input mode
Example: Entering a message
1. In the text entry screen, select
.
2. Select the mode you want to use from the
list.
32
Using Handwriting mode
Your phone is equipped with powerful character
recognition software that allows you to convert
your handwriting into typed characters
accurately and efficiently
Tips for using Handwriting mode
• Because of the touch screens sensitivity,
choices displayed may differ each time you
write a character.
• If you cannot find the symbolic characters
you want with Handwriting mode, use the
Symbol mode to enter them.
• Write at a normal speed. If you write letters
too slowly or too quickly, the phone may not
recognise your writing.
• Tap, drag, and lift the stylus pen, as
precisely as possible.
Entering a word
Function
1
Text input field
2
Clear the last input.
3
Enter a space.
4/5
Enter an English letter.
3
6
Enter a number or symbol.
4
7
Expend the text input field.
6
8
Change the text input mode.
7
9
Changes the number of the text
input fields.
10
Pen stroke field
11
Combine the text input field and
pen stroke field.
1
11
10
9
2
5
8
Enter text
Location
1. Select an input mode from the screen.
33
Enter text
2. Write a character at a time on the Pen stroke
field.
3. Tap one of the choices to enter it into text.
Other Handwriting mode operations
• Draw the space
stroke as shown to
enter a space.
• Draw the backspace
stroke as shown to
delete a character.
Sequences of pen strokes
When you use the English alphabet, numbers,
and symbols, refer to the following tables to
enter strokes in the correct order.
34
English
Numbers
Using Keypad mode
Enter text
You can enter text by pressing the
alphanumeric keys on the phone, labelled with
the Chinese strokes and alphabet.
Using English mode
Symbols
1. Select
from the screen to switch to
English mode.
Change the
letter case.
35
Enter text
2. Tap the appropriate key until the character
you want appears on the screen.
Using T9 mode
This mode allows you to enter English by using
T9 technology. T9 is a predictive text input
mode that allows you to key in any character
using single keystrokes.
Entering a word
36
1. Select
from the screen to switch to
English word mode.
2. Tap 2 to 9 to start entering a word. Tap each
key once for each letter.
For example, tap 4, 3, 5, 5, and 6 to enter
Hello in T9 mode.
T9 predicts the word that you are typing,
and it may change with each key that you
press.
3. Enter the whole word before editing or
deleting characters.
4. When the word displays correctly, go to step
5. Otherwise, tap 0 to display alternative
word choices for the keys that you have
taped.
For example, Of and Me use 6 and 3.
5. Select
to insert a space and enter the
next word.
Adding a word to the T9 dictionary
This feature may not be available for some
languages.
1. Enter the word that you want to add.
2. Tap 0 to display alternative words for your
key presses. When there are no more
alternative words, Spell appears on the
bottom line.
3. Select <Spell>.
4. Enter the word you want using English mode
and select <Save>.
Using Keyboard mode
You can enter numbers and symbols by
selecting
from the screen.
You can select either the alphabetic, numeric,
or symbolic keyboard.To enter characters using
the onscreen keyboard, just tap the one you
want on the keyboard.
Enter text
Using Number or Symbol mode
1. Select an input mode from the screen.
1
2
Display more
symbols.
3
4
5
6
7
8
9
37
Call functions
Location
Function
1
Text input field
2
Clear the last input.
3
Enter a space.
4/5
Enter an English letter.
6
Enter a number or symbol.
7
Expend the text input field.
8
Change the text input mode.
9
Assign a tone for the selected
pinyin.
2. Enter the word you want.
3. Select one of the choices to enter it into text.
38
Call functions
Advanced calling features
Making a call
1. In Idle mode, select
.
2. Enter an area code and phone number.
• Select
or press [C] to clear the last
digit or tap and hold
or press and
hold [C] to clear the whole display. You
can move the cursor to edit an incorrect
digit.
• Tap and hold
to enter a pause
between numbers.
• Tap
to switch to the Speed dial screen.
p. 49
3. Select
or press [
].
4. When you want to end the call, press [
].
Making an international call
Redialling recent numbers
1. In Idle mode, press [
] to display the list
of recent numbers.
2. Scroll to the number you want and press
[
].
Making a call from Phonebook
Once you have stored a number in Phonebook,
you can dial the number by selecting it from
Phonebook. p. 46
You can quickly dial a number from the SIM
card using the location number assigned when
stored.
1. In Idle mode, select
.
2. Enter the location number for the phone
number you want and select .
3. Scroll through other numbers, if necessary.
] to dial the
4. Select <Dial> or press [
number you want.
Call functions
1. In Idle mode, select
.
2. Tap and hold 0. The + character appears.
3. Enter the country code, area code, and
phone number, then tap
or press [
].
Answering a call
When you receive a call, the phone rings and
displays the incoming call image.
] to answer the
Select <Accept> or press [
call.
Tips for answering a call
• When Anykey answer is active, you can
press any key to answer a call, except for
[ ], [ / ] and <Reject>.p. 117
• Select <Reject> or press [ ] to reject a
call.
39
Call functions
• Press and hold [ / ] to reject a call or
mute the ringer, depending on the Volume
key setting. p. 117
40
To
Press
redial the last call
the button and then
press and hold it again.
Viewing missed calls
answer a call
the button and hold.
If you have any missed calls, the screen
displays how many calls you have missed.
end a call
the button and hold.
1. Select <View>.
2. If necessary, scroll through the missed calls.
3. Press [
] to dial the number you want.
Options during a call
Using the headset
Adjusting the volume during a call
Use the headset to make or answer calls
without holding the phone.
Connect the headset to the jack on the left side
of the phone. The button on the headset works
as follows:
Use [ / ] to adjust the earpiece volume
during a call.
Press [ ] to increase the volume level and [
to decrease the volume level.
You can access a number of functions during a
call.
]
Placing a call on hold/Retrieving
Select <Hold> to place the call on hold, or
select <Retrieve> to retrieve the call.
1. Press [
] to answer the call. The first call is
automatically put on hold.
2. Select <Swap> to switch between the calls.
Making a second call
Using the speakerphone feature
You can make another call if your network
supports this function.
1.
2.
3.
4.
Select <Hold> to put the call on hold.
Make the second call in the normal way.
Select <Swap> to switch between the calls.
Select <Options> → End held call to end
the call on hold.
5. To end the current call, press [ ].
Answering a second call
You can answer an incoming call while already
on the phone, if your network supports this
function and you have activated the call waiting
feature.p. 123
Use the speakerphone feature to talk and listen
with the phone a short distance away.
Press [
] to activate the speakerphone
feature. Press the key again to switch back to
the earpiece.
Using In-call options
Select <Options> to access the following
options during a call:
• Switch to headset/Switch to phone:
switch the call to a Bluetooth headset or
hands-free car kit or back to the phone. To
use this feature, you first need to connect
your headset or car kit to the phone.
p. 60
41
Call functions
• Voice clarity on/Voice clarity off: remove
extraneous noise and increase call quality so
that the person with whom you are speaking
can hear you clearly even if you are in a
noisy place.
• Mute/Unmute: switch off the phone's
microphone so that the other person on the
phone cannot hear you, or switch it back on.
• Dialer: open the dialling screen.
• Mute keys/Send keys: switch the key
tones off or on.
•
•
•
To communicate with answering machines
or computerised telephone systems,
Send keys must be selected.
• Phonebook: access the contact list.
• Send DTMF: send the DTMF (Dual tone
multi-frequency) tones as a group. The
DTMF tones are the tones used in phones for
tone dialling, sounding when you select the
number keys from the dialling screen.
42
•
•
This option is helpful for entering a password
or an account number when you call an
automated system, like a banking service.
Message: read an incoming message and
send a new message.p. 71
Join: set up a multi-party call by adding a
caller on hold to a currently active call. You
can include up to five people on a
multi-party call.
Split: have a private conversation with the
selected participant. The other participants
can converse with each other. After the
private conversation, select Join to return
both private participants to the multi-party
call.
Transfer: transfer the currently active call
to a caller on hold. The two callers can talk
to each other, but you are disconnected from
the call.
Remove: disconnect the selected
participant.
• End held call: disconnect the call currently
on hold.
• Conv. record: record your conversation.
• SIM service: access special services, such
as news, weather forecasts, entertainment,
and location services, provided by your SIM
card. This option is available when you use a
SIM card supporting SIM AT menus.
Menu functions
All menu options listed
Call log
(Menu 1)
Use this menu to view the calls you have
dialled, received, or missed, and the length of
the calls. You can also check the cost of your
calls, if the SIM card supports this function.
To access this menu, select <Menu> in Idle
mode → Call log.
Recent contacts (Menu 1.1)
This menu displays the most recent calls
dialled, received, or missed.
Accessing a call record
1. Select a call type.
43
Menu functions
2. Scroll through the call list.
3. Press [
] to dial a number, or [
view the details of a call.
Missed calls (Menu 1.2)
] to
Using call record options
While viewing call details, select <Options> to
access the following options:
• Call: make a call to the number.
• Add to Phonebook: save the number in
Phonebook.
• View contact details: access contact
information, if the caller is saved in
Phonebook.
• Send message: send an SMS or MMS
message to the selected number.
• Delete: delete the selected call record or all
records.
• Add to reject list: add the number to the
Reject list.
44
This menu displays the most recent received
calls that you did not answer.
Dialled calls (Menu 1.3)
This menu displays the most recent calls you
have dialled.
Received calls (Menu 1.4)
This menu displays the most recent calls you
have received.
Delete all (Menu 1.5)
Use this menu to delete all of the records in
each call type.
1. Select the call types to clear.
2. Select <Delete>.
3. Select <Yes> to confirm the deletion.
This network feature displays the cost of calls.
This menu is available only if supported by your
SIM card. Note that this is not intended to be
used for billing purposes.
• Last call cost: check the cost of your last
call.
• Total cost: check the total cost of all your
calls. If the total cost exceeds the maximum
cost set in Set max cost, you must reset
the counter before you can make another
call.
• Max cost: check the maximum cost limit set
in Set max cost.
• Reset counters: reset the cost counters.
• Set max cost: set the maximum cost
authorised for your calls.
• Price/Unit: set the price per unit that is
applied when the cost of your calls is
calculated.
The password is preset to 00000000. You
can change this password.p. 125
Call log (Menu 1)
Call costs (Menu 1.7)
This menu displays the time log for calls made
and received. The actual time invoiced by your
service provider will vary.
• Last call time: check the length of your last
call.
• Total sent: check the total length of all the
calls you have dialled.
• Total received: check the total length of all
the calls you have received.
• Reset timers: reset the call timers. You
need to enter the phone password.
Menu functions
Call time (Menu 1.6)
45
Phonebook
(Menu 2)
You can store phone numbers on your SIM card
and in your phone’s memory. The SIM card and
phone’s memory are physically separate, but
they are used as a single entity called
Phonebook.
To access this menu, select <Menu> in Idle
mode → Phonebook.
Contact list (Menu 2.1)
Use this menu to search for contact information
stored in Phonebook.
Finding a contact
1. Select <Change>.
2. Enter the first few letters of the name that
you want to find and press [
].
3. Select the name you want from the list.
46
4. Scroll to a number and press [
] to dial, or
press [
] to edit the contact information.
Using Phonebook options
While viewing contact details, select
<Options> to access the following options:
• Edit: edit contact information.
• Send message: send an SMS or MMS
message to the selected number, or send an
MMS message or e-mail to the selected
e-mail address.
• Copy: copy the number to the phone’s
memory, to the SIM card, or to the FDN list.
• Send via: send the contact via SMS, MMS,
e-mail, or Bluetooth.
• Delete: delete the selected contact.
• Mark as default number: set the selected
number as the default for the contact.
Some printers may not be compatible with
the phone.
FDN contacts (Menu 2.2)
Using contact options
You can access contact options by selecting
<Options> in the contact list. p. 46
Phonebook (Menu 2)
Use this menu to create a list of contacts to be
used in FDN (Fixed Dialling Number) mode, in
which the phone allows outgoing calls only to
the specified phone numbers, if your SIM card
supports this feature. You can activate FDN
mode in the FDN mode menu.p. 126
• Name: assign a name.
• Phone number: add a number.
• Location: assign a location number.
4. Select <Save> to save the contact.
Menu functions
• Print via Bluetooth: print contact
information by connecting the phone to a
printer via Bluetooth.
Create contact (Menu 2.3)
Use this menu to add a new contact to
Phonebook.
Adding a contact
Storing a number in the phone’s
memory
1. From the FDN list, select <Options> →
Add.
2. Enter your PIN2 supplied with the SIM card
and select <OK>.
3. Enter information about the contact:
1. Select Phone.
2. Change the settings or enter information
about the contact:
• First name/Last name: assign a name.
47
Menu functions
• Mobile/Home/Office/Fax/Other: add a
number in any category.
You can change the number type, or set
the number as the default for the contact
by selecting <Options> → Change type
or Mark as default number.
• Email: assign an e-mail address.
You can set domain name extensions and
retrieve one by selecting <Options> →
Common address.
• Graphic ID: assign a caller ID image or a
video clip to alert you to a call from the
person.
• Ringtone: assign a ringtone to alert you
to a call from the person.
The settings specified in Graphic ID and
Ringtone are given priority over group
settings.
48
• Group: assign the number to a caller
group.
• Anniversary: enter the person’s
birthday.
• Notes: add a memo about the person.
3. Select <Save> to save the contact.
Storing a number on the SIM card
1. Select SIM → New.
2. Enter information about the contact:
• Name: assign a name.
• Phone number: add a number.
• Location: assign a location number.
To assign a caller ID image, ringtone, or group,
the contact must be saved to the phone’s
memory.
3. Select <Save> to save the contact.
Group (Menu 2.4)
Adding members to a caller group
Select
Select
Select
Select
a group.
<Add>.
the contacts you want.
<Options> → Add.
Speed dial (Menu 2.5)
Use this menu to assign speed dial numbers (2
to 9) for 8 of your most frequently dialled
numbers.
Managing caller groups
Assigning speed dial entries
While viewing the group list, select <Options>
to access the following options:
• View: display the members of the selected
group.
• Add: add a new group.
• Edit: change the properties of the selected
group.
1. Scroll to a key location from 2 to 9. Key 1 is
reserved for your voicemail server.
2. Select <Options> → Add → Contact list or
FDN contacts.
3. Select a contact from the contact list.
4. Select a number, if the contact has more
than one number.
Phonebook (Menu 2)
1.
2.
3.
4.
• Send message: send an SMS, MMS, or
e-mail to the members you want.
• Delete: delete the selected group. Group
members, however, will not be deleted from
Phonebook.
Menu functions
Use this menu to organise your contacts in
caller groups.
49
Menu functions
Managing speed dial entries
My namecard (Menu 2.6)
From the Speed dial screen, select <Options>
to access the following options:
• Add: assign a number to an unassigned key.
You can select a contact from Phonebook or
the FDN list.
• View: check the name and number assigned
to the key.
• Change: assign a different number to a key.
• Remove: clear the speed dial setting for a
key.
Use this menu to create a name card and send
it to other people.
Dialling speed dial numbers
1. In Idle mode, select
.
2. Tap .
3. Tap the appropriate number key.
50
Saving your name card
The procedure for creating your name card is
the same as the one for saving a number in the
phone’s memory.p. 47
Using name card options
After saving your name card, select <Options>
to access the following options:
• Edit: edit the name card.
• Send via: send the name card via SMS,
MMS, e-mail, or Bluetooth.
• Exchange namecard: exchange name
cards with another person’s name card via
Bluetooth.
• Remove: delete the name card.
Some printers may not be compatible with
the phone.
Own number (Menu 2.7)
Management (Menu 2.8)
Use this menu to manage contacts in
Phonebook.
• Save new contacts to: select a default
memory location for saving contacts. If you
select Always ask, the phone will ask you to
select a memory location each time you save
a number.
Phonebook (Menu 2)
Use this feature to check your phone numbers,
or to assign a name to each of the numbers.
Changes made here do not affect the actual
subscriber numbers on your SIM card.
• Copy all: copy all of the contacts stored on
the SIM card to the phone’s memory, or vice
versa.
• List by: sort your contacts by the first name
or last name.
• Delete all: delete all of the contacts from
your phone’s memory, your SIM card, or the
FDN list.
• Search by initials: search for a contact
with the initial letters of the first name and
last name in the contact list.
• Memory status: display the number of
contacts you have stored in Phonebook.
Menu functions
• Print via Bluetooth: print your contact
information by connecting the phone to a
printer via Bluetooth.
Service number (Menu 2.9)
Use this menu to view the list of Service Dialling
Numbers (SDN) assigned by your service
provider, including emergency numbers and
numbers for directory enquiries. This menu is
available if your SIM card supports SDN.
51
Menu functions
1. Scroll to the number you want and select
<View>.
2. Select <Dial> or [
].
Applications
(Menu 3)
Use this menu to play music files, edit photos,
or play Java applications. You can also use the
Bluetooth feature.
To access this menu, select <Menu> in Idle
mode → Applications.
Music player (Menu 3.1)
Use this menu to enjoy music. First, you need
to save music files in your phone’s memory or
on a memory card. To enjoy high quality music,
you can use an optional Bluetooth stereo
headset.
Normal headsets and Bluetooth mono headsets
are not compatible with the music player.
52
Downloading or receiving music files
You can play *. mp3, *.aac, and *.m4a files.
Use the following methods to save music files to
your phone:
• Download from the wireless webp. 67
• Download from a computer using the
Samsung PC Studio programmeSamsung
PC Studio User’s Guide
• Receive via an active Bluetooth connection
p. 62
• Copy to a memory card and insert the card
into the phone p. 30
Downloaded or received files are stored in the
Music folder.p. 96
Creating a play list
Add the music files to the play list so you can
play them.
Key/Icon Function
Sets the music player to play tracks
in random order.
Changes the repeat mode. (
:
Off,
: Repeat one,
: Repeat
all)
Playing music files
Key/Icon Function
/
Pauses playback.
/
Resumes playback.
Up
Opens the current play list.
Left
Returns to the previous file. Moves
backward in a file when held down.
Right
Skips to the next file. Skips forward
in a file when held down.
/
Down
Applications (Menu 3)
1. From the music player screen, select
<Options> → Play via.
2. Select Phone to use the phone speaker.
Select Bluetooth stereo headset to use a
Bluetooth stereo headset and then search for
and connect the phone to the headset.
During playback, use the following keys and
icons:
Menu functions
1. From the music player screen, select
<Options> → Add music from → Phone or
Memory card.
2. Select the files you want → <Add>.
Adjusts the volume.
Stops playback.
53
Menu functions
Using music player options
From the music player screen, select
<Options> to access the following options:
• Play/Pause: begin or pause playback.
• Stop: stop playback.
• Play via: play the selected file via the phone
speaker or a Bluetooth stereo headset.
• Transfer to Bluetooth stereo headset/
Transfer to phone: switch the sound
output to a Bluetooth headset or the phone
speaker.
• Open playlist: access the current play list
or album list.
• Remove from playlist: remove the
selected file from the play list.
• Send via: send the current file via MMS,
e-mail, or Bluetooth.
• Set as: set the file as your ringtone, as a
ringtone for a Phonebook entry, or as an
alarm tone.
54
• Activate key: get a new licence key when
the key for the selected DRM file expires.
• Reactivate key: get another licence key
even when the key for the selected DRM file
has not expired.
• Settings: change the default settings for
playing music files:
Repeat mode: select a repeat mode.
Shuffle: set the music player to play tracks
in random order.
Equaliser: change the equaliser setting.
3D sound: turn 3D sound on or off.
Visualization: change the playback
animation.
Volume: select a volume level.
Music overrides other sounds: set the
Music player to continue playback even if
you exit it.
• Details: access the file properties.
Accessing the play list
Voice recorder (Menu 3.2)
Applications (Menu 3)
From the music player screen, press [Up].
Select <Options> to access the following
options:
• Play via: play the selected file via the phone
speaker or a Bluetooth stereo headset.
• Add music from: add files to the play list.
• Move track in playlist: move the selected
file to the position you want within the play
list.
• Activate key: get a new licence key when
the key for the selected DRM file expires.
• Reactivate key: get another licence key
even when the key for the selected DRM file
has not expired.
• Go to all playlists: access the album list.
• Move to: move the selected file to another
music album.
• Copy to: copy the selected file to another
music album.
• Remove: remove the selected file or all files
from the play list.
• Details: access the file properties.
• Key management: manage the licence
keys you have acquired.
Menu functions
• Key management: manage the licence
keys you have acquired.
Use this menu to record voice memos. A voice
memo can be up to one hour long.
Recording a voice memo
1. Select
or press [
] to start recording.
2. Speak into the microphone.
• Select
or press [
] to pause the
recording.
• Select
or press [
] to resume the
recording.
55
Menu functions
3. When you have finished, select
or
<Save>, or press [Down]. The voice memo
is automatically saved.
Select
to save the voice memo and
review the memo immediately.
4. Select
or press [
] to review the
voice memo, or press [Up] to record a new
memo.
Playing a voice memo
1. From the voice recorder screen, select
<Options> → Go to My voice clips.
2. Select a voice memo. The memo plays.
During playback, use the following keys and
icons:
Key/Icon
56
Function
/
Pauses playback.
/
Resumes playback
Key/Icon
Function
Left
Moves backward in a file.
Switch to Record mode.
Right
/
Down
Skips forward in a file.
Adjusts the volume.
Stops playback.
Using voice recorder options
From the voice recorder screen, select
<Options> to access the following options:
• Play: play the selected voice memo in
Review mode.
• Record: record a new voice memo.
• Go to My voice clips: access the voice
memo list.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
Image editor (Menu 3.3)
Menu functions
Use this menu to edit your photos using various
editing tools.
Applying an effect
1. Select <Options> → New image → Open
or Take a photo.
2. Select a photo or take a new photo.
3. Select <Load>, or select <Options> →
Load.
4. Select <Options> → Effects → an effect
option.
5. Select <Done>.
6. Select <Options> → Save as.
7. Select <Yes>.
8. Enter a new file name and press [
].
Applications (Menu 3)
• Set as: set the file as your ringtone, as a
ringtone for a Phonebook entry, or as a
ringtone for alarms.
• Move to: move the file to another folder or
a memory card, if inserted.
• Copy to card: copy the file to a memory
card, if inserted.
• Delete: delete the file.
• Rename: change the file name.
• Bluetooth visibility: share the selected file
with other Bluetooth devices.
• Lock/Unlock: lock the file to prevent if from
being deleted, or unlock the file.
• Details: access the file properties.
57
Menu functions
Fine-tuning
58
1. Select a photo or take a new photo.
2. Select <Load>, or select <Options> →
Load.
3. Select <Options> → Adjust → an option.
• Brightness: adjust the image
brightness.
• Contrast: adjust the image contrast.
• Colour: adjust the image balance.
4. Adjust the image brightness, contrast, or
colour balance.
5. Select <Done>.
6. Select <Options> → Save as.
7. Select <Yes>.
8. Enter a new file name and press [
].
2. Select <Load>, or select <Options> →
Load.
3. Select <Options> → Transform → an
option.
• Rotate: rotate the photo 90 degrees
clockwise or counterclockwise.
• Flip: flip the photo.
• Crop: crop a desired portion of the photo.
After selecting a diagram for cropping,
you can change the size of the diagram
by dragging the resize icon ( ), or its
position by dragging the frame. Select
<Done>.
4. Select <Options> → Save as.
5. Select <Yes>.
].
6. Enter a new file name and press [
Reorienting
Adding visual features
1. Select a photo or take a new photo.
You can decorate photos by adding a frame or
an image.
6. Select <Options> → Save as.
7. Select <Yes>.
8. Enter a new file name and press [
].
Using Bluetooth wireless, you can connect the
phone wirelessly to other Bluetooth devices and
exchange data with them, talk hands-free, or
control the phone remotely.
Bluetooth technology allows free wireless
connections between all Bluetooth-compliant
devices within a range of 10 metres. Since the
devices communicate using radio waves, they
do not need to be in line of sight to each other.
Applications (Menu 3)
You can change the size of an inserted clip
art or emoticon by dragging the resize icon
( ), or its position by dragging the frame.
Bluetooth (Menu 3.4)
Menu functions
1. Select a photo or take a new photo.
2. Select <Load>, or select <Options> →
Load.
3. Select <Options> → Insert → a feature
type.
• Frame: add a decorative frame.
• Clip Art: add an image.
• Emoticon: add an emoticon.
4. Select an item.
5. If you select an image, adjust the position or
size of the inserted item and select
<Done>.
• If there are obstacles between the devices,
the maximum operating distance may be
reduced.
• It is recommended that you do not use the
Bluetooth feature while using multimedia
features such as voice recorder, camera, and
music player, or vice versa for better
performance.
• Some devices, especially those that are not
tested or approved by Bluetooth SIG may be
incompatible with your phone.
59
Menu functions
Setting up the Bluetooth feature
The Bluetooth menu provides the following
options:
• Activation: activate or deactivate the
Bluetooth feature.
• My devices: search for connectable
Bluetooth devices.
• My phone’s visibility: allow other
Bluetooth devices to connect to your phone.
• My phone’s name: assign a Bluetooth
device name to your phone, which is then
displayed on other devices.
• Secure mode: determine if the phone asks
for your confirmation when other devices
access your data.
• Bluetooth services: display available
Bluetooth services.
60
Searching for and pairing with a
Bluetooth device
1. From the Bluetooth menu, select My
devices.
2. Select Search new device.
After searching, a list of devices to which you
can connect displays. The following icons
indicate the kind of device:
•
Stereo headset
•
Mobile phone
•
Computer
•
PDA
•
Unknown device
•
Printer
•
Mono headset/Hands-free car kit
The colour of the icon indicates the status of
the device:
• Grey for unpaired devices
• Blue for paired devices
Using device options
Sending data via Bluetooth
From the device list, select <Options> to
access the following options:
• Connect: connect to a headset or handsfree car kit.
• Disconnect: end the connection with the
connected device.
1. Activate the Bluetooth feature.
2. Select the application in which the item you
want to send is stored.
3. Scroll to the item you want and select
<Options>.
Applications (Menu 3)
Some devices, especially headsets or
hands-free car kits, may have a fixed Bluetooth
PIN, such as 0000. If the other device has one,
you must enter the code.
• Browse files: search for data from the
device and import data directly to your
phone.
• Service list: access the Bluetooth service
list of the device.
• Rename: rename the paired device.
• Authorise device/Unauthorise device:
determine whether or not the phone asks
you to permit connection when other devices
try to connect to your phone.
• Delete: remove the selected device or all
devices.
Menu functions
• Orange for devices that are currently
connected to your phone
3. Select a device.
4. Enter a Bluetooth PIN and select <OK>. This
code is used just once and you do not need to
memorise it.
When the owner of the other device enters
the same code, pairing is complete.
61
Menu functions
4. Select Send via → Bluetooth.
The phone searches for devices within range
and displays a list of available devices.
5. Select a device.
6. If necessary, enter the Bluetooth PIN needed
for pairing and select <OK>.
Receiving data via Bluetooth
To receive data via Bluetooth, your phone’s
Bluetooth feature must be active and its
visibility must be enabled.
1. If an unauthorised Bluetooth device sends
data to your phone, select <Yes> to allow
the device to access your phone.
2. Select <Yes> to receive data.
Java world (Menu 3.5)
Use this menu to access the embedded Java
games and downloaded Java applications.
62
Playing a game
Select a game from the game list and follow the
onscreen instructions. The procedure may differ
from game to game.
Using Java application options
From the application list, select <Options> to
access the following options:
• Start: launch the selected application.
• Delete: delete the selected application.
• Details: access the application properties.
• Permission: set permission settings for
services charging you additional costs, such
as network access and SMS.
• Lock/Unlock: lock the application to
prevent it from being deleted, or unlock the
application.
• Upgrade: upgrade the application to the
latest version, except for embedded games.
- DNS1: enter the primary address.
- DNS2: enter the secondary address.
Games (Menu 3.6)
Dictionary (Menu 3.7)
Use this menu to search for words.
Looking up a word
1. Select <Change>.
2. Enter the word you want and press [
].
3. Select the word you want.
The display shows the pronunciation of the
word you entered and the corresponding
words.
63
Applications (Menu 3)
Use this menu to access the embedded touch
games.
Select a game from the game list and follow the
onscreen instructions. The procedure may differ
from game to game.
Menu functions
• Send information via text message: send
the URL address containing the application
via SMS, except for embedded games.
• Memory status: access memory
information for applications.
• Network settings: customise a connection
profile to be used for applications requiring
network access. The following options are
available:
APN: enter the access point name of the
network gateway.
Login ID: enter the user ID.
Password: enter the password.
Proxy: activate or deactivate the proxy
server.
Proxy settings: customise the following
proxy settings:
When the proxy is set to Enable:
- IP address: enter the gateway address.
- Port: enter the port number.
When the proxy is set to Disable:
Menu functions
4. To look up another word, select <Back> and
repeat from step 1.
To save the word in the Wordbook, select
<Options> → Save.
Using dictionary options
From the dictionary screen, select <Options>
to access the following options:
• History: view the list of words you have
searched for.
• Word book: view the list of the words you
have saved.
• Review: test whether or not you memorise
words you have saved in Word book.
next section
• Set colour: change the font colour to be
displayed on the screen.
• Cancel: exit the Dictionary screen.
64
Testing
1. From the Dictionary screen, select
<Options> → Review.
2. Select English, Chinese Simplified, or
Chinese Traditional.
3. Select <Change>.
4. Enter the word for the meaning displayed on
the screen and press [
].
5. Select <Options> → Answer.
While testing, select <Options> to access the
following options:
• Answer: check the correct answer.
• Show answer: show the correct answer.
• Next: skip to the next question.
• Cancel: exit the test.
PenMemo (Menu 3.8)
Creating a new PenMemo
Icons
Function
• Erases the drawing as you
move the pen when held down.
• Opens the line picker screen so
that you can change the line
thickness.
Function
Opens the line picker screen of the
paint brush so that you can change
the line thickness. This option is
not available when you select the
paint brush tool.
Creates a new sketch memo.
Changes the pen colour.
Switches to the paint brush.
Cancels your last action. Deletes
the last 10 strokes of the sketch
memo when held down.
Applications (Menu 3)
1. Draw a sketch using the stylus pen on the
screen.
2. Use the following icons at the bottom line of
the screen:
Icons
Menu functions
You can create memos by drawing a sketch
using the stylus pen on the touch screen
yourself.
Opens the memo list.
65
Menu functions
3. When you have finished, select
.
Using PenMemo options
While creating a memo, select <Options> to
the following options:
• Save: save the memo.
• New: create a new memo.
• Paint/Pen: switch between paint brush and
pen.
• Erase: erase the drawing as you move the
pen.
• Undo: cancel your last action.
• Tool diameter: open the line picker screen
so that you can change the line thickness.
• Tool colour: change the pen colour.
• PenMemo List: go to the memo list.
• Cancel: exit the PenMemo screen.
66
Viewing a PenMemo
1. From the PenMemo screen, select
.
2. Select the memo you want.
3. Use the following icons at the bottom line of
the screen:
Icons
Function
Edits the selected memo.
Creates a new memo.
Deletes the selected memo.
Changes the memo name.
While viewing a memo, select <Options> to
access the following options:
• View: return to the view screen.
• Edit: edit the memo.
• Create: create a new memo.
SIM-AT (Menu 3.9)
(Menu 4)
The Wireless Application Protocol (WAP) on
your phone allows you to access the wireless
web. Using the web browser, you can access
up-to-date information and a wide variety of
media content, such as wallpapers, ringtones,
and music files.
To access this menu, select <Menu> in Idle
mode → Browser.
Browser (Menu 4)
This menu is available if you use a SIM-AT card
that supports SIM Application Toolkit menus
and provides additional services, such as news,
weather, sports, entertainment, and location
services. Available services may vary,
depending on your service provider’s plans. For
details, see your SIM card instructions or
contact your service provider.
Browser
Menu functions
• Delete: delete the selected memo or all
memos.
• Rename: change the file name.
• View by: change the view mode of the
memo list.
Home (Menu 4.1)
Use this menu to connect your phone to the
network and load the homepage of the wireless
web service provider.
The touch screen is deactivated in this menu.
67
Menu functions
Navigating the web browser
To
Press
scroll through
browser items
[Up] or [Down].
select a browser
item
[
<
return to the
previous page
[C] or select
<Back>.
return to the
homepage
and hold [C].
] or select
>.
Using browser options
1. Select
.
2. Select one of the following browser options:
• Browser Menu: access other phone
menus:
68
•
•
•
•
•
Enter URL: enter a URL address
manually.
Bookmarks: switch to the Bookmarks
menu.
Messages: check the messages stored in
the My messages folder. You can also
create and send a new SMS message.
My files: switch to the My files menu.
Home: return to the homepage.
Back: return to the previous page.
Reload: reload the current page.
Show URL: display the URL address of
the current web page.
About ...: access version and copyright
information about the browser.
Exiting the browser
Press [ ] to end the network connection and
exit the browser.
After saving an item, select <Options> to
access the following options:
• Open: access the website.
• Edit: edit the address and name of the
bookmark.
• Delete: delete the selected bookmark or all
bookmarks.
Adding a bookmark
1. Select an empty location.
2. Select the Name line.
3. Enter a name for the bookmark and press
[
].
4. Select the URL line.
5. Enter the URL address and press [
].
6. Select <Save> to save the bookmark.
Browser (Menu 4)
Using bookmark options
Use this menu to save URL addresses to quickly
access a website.
Menu functions
Bookmarks (Menu 4.2)
Enter URL (Menu 4.3)
Use this menu to manually enter the URL
address of a website and access the website.
Accessing a bookmarked page
Clear cache (Menu 4.4)
Selecting a bookmark item launches the web
browser and access the associated web page.
Use this menu to clear the cache, which is the
temporary memory that stores the web pages
you have recently accessed.
69
Menu functions
Profile settings (Menu 4.5)
Use this menu to set up servers for the web
browser. Contact your service provider for
details about your setting options.
For each server, the following options are
available:
• Profile name: assign a name to the server
profile.
• Home URL: enter the address of your
homepage.
• Bearer: select a bearer for each type of
network address accessed.
• Proxy: activate or deactivate the proxy
server.
• GPRS settings: customise the GPRS
network settings:
When the proxy is set to Enable:
Proxy IP: enter the web gateway address.
70
Proxy port: enter the port number.
APN: enter the access point name of the
GPRS network gateway.
Login ID: enter the user ID.
Password: enter the password.
When the proxy is set to Disable:
DNS1: enter the primary address.
DNS2: enter the secondary address.
APN: enter the access point name of the
GPRS network gateway.
Login ID: enter the user ID.
Password: enter the password.
• GSM settings: customise the following GSM
network settings:
When the proxy is set to Enable:
Proxy IP: enter the web gateway address.
Proxy port: enter the port number.
Dial number: enter the PPP server phone
number.
Use this menu to activate one of the proxy
servers you have set up.
(Menu 5)
Use the Messages menu to send and receive
short messages, multimedia messages, and
e-mails. You can also access push messages
and broadcast message, and use the SOS
message feature.
To access this menu, select <Menu> in Idle
mode → Messages.
Messages (Menu 5)
Current profile (Menu 4.6)
Messages
Menu functions
Login ID: enter the user ID.
Password: enter the password.
Data call type: select a data call type.
When the proxy is set to Disable:
DNS1: enter the primary address.
DNS2: enter the secondary address.
Dial number: enter the PPP server phone
number.
Login ID: enter the user ID.
Password: enter the password.
Data call type: select a data call type.
Create new message (Menu 5.1)
Use this menu to create and send text
messages, multimedia messages, or e-mails.
Text message (Menu 5.1.1)
Short Message Service (SMS) allows you to
send text messages including pictures, audio
clips, and animated images.
71
Menu functions
Creating and sending an SMS message
1. Enter your message and press [
].
• The maximum number of characters
allowed in a message varies by service
provider. If your message exceeds the
maximum number of characters, the
phone will split the message.
• You can use various options by selecting
<Options>.next section
2. Select a destination field.
3. Enter a destination number and press
[
].
To send the message to more than one
recipient, fill in additional destination fields.
4. Select <Options> → Send to send the
message.
72
Using options while composing an SMS
message
While composing a message, select <Options>
to access the following options:
• Send only: just send the message.
• Save and send: send the message and then
save it in the Sentbox folder.
• Preview as vivid message: view the
message in 3D view mode. The phone
converts message text to 3D vivid graphics.
This option is available only when the
message consists of a single page.
• Insert: add a template, Phonebook entry, or
bookmarked URL address.
• Add picture/Add animation/Add melody:
attach a simple image, animated image, or a
melody.
• Attach: add name cards or calendar data as
data format attachments.
4. Select Add image or Add video and add an
image or a video clip.
Multimedia message (Menu 5.1.2)
Creating and sending an MMS message
1. Select the Subject line.
You can use various options by selecting
<Options>.next section
2. Enter the message subject and press [
3. Select the Image or video line.
].
• The maximum size allowed for a message
can differ, depending on your service
provider.
• Depending on the file type or DRM (Digital
Rights Management) system, some files
may not be able to be forwarded.
5. Select the Music or sound line.
6. Select Add music or Add sound and add a
music file or a sound clip.
7. Select the Text line.
8. Enter the message text and press [
].
9. When you have finished, select <Options>
→ Send.
10.Select a destination filed.
11.Enter a phone number or an e-mail address
and press [
].
To send the message to more than one
recipient, fill in additional destination fields.
Messages (Menu 5)
Multimedia Message Service (MMS) delivers
messages containing a combination of text,
image, video, and audio, from phone to phone
or from phone to e-mail.
Menu functions
• Save in: save the message in another
message folder.
• Text style: change the text attributes.
• Cancel: cancel composing the message.
73
Menu functions
12.Select <Options> → Send to send the
message.
Using options while composing an MMS
message
While composing a message, select <Options>
to access the following options:
• Add: add the message subject or message
text.
• Add image/Add video/Add music/Add
sound: add an image, video clip, or sound
clip.
When you add a video clip, you are unable to
add a sound file to the current page. To
insert a sound file, add a new page.
• Edit: edit the subject or text.
• Change image/Change video/Change
music/Change sound: replace an added
item.
74
• Preview: view the message as it will be
shown on the recipient’s phone.
• View: open the selected attachment.
• Send: send the message.
• Save in: save the message in another
message folder.
• Add page: add pages. Move to each page
by pressing [Left] or [Right].
• Delete page: delete the added page.
• Edit page: change the duration of page
display or move the page forward or
backward among the other pages.
• Attach: attach name cards or calendar data
as data format attachments, memos, or
document files stored in the Other files
folder.
• Remove subject/Remove text/Remove
media/Remove: remove an added item.
Email (Menu 5.1.3)
You can use various options by selecting
<Options>.next section
2. Enter the subject of your e-mail and press
[
].
3. Select the Message line.
4. Enter the e-mail text and press [
].
5. Select the File attach line.
6. Add media files, document files stored in the
Other files folder, Phonebook entries as
name cards, or calendar data as data format
attachments.
7. When you have finished, select <Options>
→ Send.
8. Select a destination field.
9. Enter an e-mail address and press [
].
To send the e-mail to more than one
recipient, fill in additional destination fields.
10.Select <Options> → Send to send the
e-mail.
Using options while composing an e-mail
While composing an e-mail, select <Options>
to access the following options:
• Add: add the subject of your e-mail or
e-mail text.
• Edit: edit the subject or text.
• Add image/Add videos/Add sounds/Add
music: add media files stored in the phone’s
memory.
75
Messages (Menu 5)
1. Select the Subject line.
Depending on the file type or DRM (Digital
Rights Management) system, some files
may not be able to be forwarded.
Menu functions
You can create and send e-mails that include
text, audio, and images. To use this feature,
you need to subscribe to an e-mail service and
set up your e-mail account and profile.
p. 88, p. 90
Creating and sending an e-mail
Menu functions
• Add other file: add document files stored in
the Other files folder.
• Add from memory card: add files stored
on a memory card.
• View/Play: open the selected attachment.
Attached files from the Other files folder
cannot be opened in your phone.
• Send: send the e-mail.
• Save in: save the e-mail in another
message folder.
• Attach: attach Phonebook entries as name
cards or calendar data as data format
attachments.
• Remove subject/Remove message/
Remove: clear the subject or text, or
attachment.
• Remove all attachments: delete all
attachments.
76
My messages (Menu 5.2)
Use this menu to access messages you have
received, sent, or have failed in sending.
Inbox (Menu 5.2.1)
This folder stores all of the messages you have
received, except for e-mails.
Viewing a message
The following icons may appear on the message
list to show the message type:
•
SMS
•
MMS
•
MMS notifications
•
Push messages
A ! icon next to a message means that the
message is of high priority. A grey-coloured
message icon indicates low priority.
Using message options
Messages (Menu 5)
SMS messages
• Reply via: reply to the sender via SMS or
MMS.
• Forward: forward the message to other
people.
• View as vivid message/View as text
message: view the message in 3D view
mode or switch back to normal view mode.
This option is available only when the
message consists of a single page.
• Delete: delete the message.
• Move to phone/Move to SIM: move the
message between the SIM card and the
phone’s memory.
• Add to block list: add the sender’s number
to the Block list.
• Cut address: extract URL addresses, e-mail
addresses, or phone numbers from the
message.
• Attached items: save media content from
the message into your phone’s memory.
• Print via Bluetooth: print the message by
connecting the phone to a printer via
Bluetooth.
Menu functions
While viewing a message, select <Options> to
access the following options:
Some printers may not be compatible with
the phone.
• Lock/Unlock: lock the message to prevent
it from being deleted, or unlock the
message.
MMS messages
• Retrieve: retrieve the MMS message from
the server.
• Reply via text message: send a reply
message via SMS.
77
Menu functions
• Reply via multimedia message to: send a
reply message via MMS to the sender or all
recipients.
• Forward: forward the message to other
people.
• Delete: delete the message.
• Add to block list: add the sender’s number
to the Block list.
• Cut address: extract URL addresses, e-mail
addresses, or phone numbers from the
message.
• Attached items: save media content from
the message into your phone’s memory.
• Lock/Unlock: lock the message to prevent
it from being deleted, or unlock the
message.
• Details: access the message properties.
78
Push messages
• Open URL: connect to the URL address
specified in the message.
• Delete: delete the message.
• Cut address: extract URL addresses, e-mail
addresses, or phone numbers from the
message.
Delivery reports
• Delete: delete the report.
Configuration messages
• Install: apply the configuration value in the
message to the phone.
• Delete: delete the message.
• Cut address: extract URL addresses, e-mail
addresses, or phone numbers from the
message.
• Lock/Unlock: lock the message to prevent
it from being deleted, or unlock the
message.
Draft (Menu 5.2.2)
This folder stores messages that the phone is
attempting to send or has failed to send.
While viewing a message, select <Options> to
access the following options:
• View/Play: open the selected file.
Attached files from the Other files folder
cannot be opened in your phone.
• Save to My files: save the selected file.
Messages (Menu 5)
Outbox (Menu 5.2.3)
• Save: save the attached name cards and
calendar items to the phone.
• Send again: retry sending the message.
• Forward: forward the message to other
people.
• Delete: delete the message.
• Move to phone/Move to SIM: move the
message between the SIM card and the
phone’s memory.
• Print via Bluetooth: print the message by
connecting the phone to a printer via
Bluetooth.
Menu functions
This folder stores messages you have saved to
send at a later time.
When you select an SMS or e-mail message, it
opens in Edit mode so that you can edit and/or
send the message.
When you select an MMS message, it opens in
Preview mode as in the Inbox. To edit the MMS
message, select <Options> → Edit.
Some printers may not be compatible with
the phone.
• Lock/Unlock: lock the message to prevent
it from being deleted, or unlock the
message.
• Details: access the MMS message
properties.
79
Menu functions
Sentbox (Menu 5.2.4)
This folder stores messages that you have sent
successfully.
While viewing a message, select <Options> to
access the following options:
• View/Play: open the selected file.
Attached files from the Other files folder
cannot be opened in your phone.
• Forward: forward the message to other
people.
• Cut address: extract URL addresses, e-mail
addresses, and phone numbers.
• Delete: delete the selected message.
• Move to phone/Move to SIM: move the
message between the SIM card and the
phone’s memory.
80
• Print via Bluetooth: print the message by
connecting the phone to a printer via
Bluetooth.
Some printers may not be compatible with
the phone.
• Lock/Unlock: lock the message to prevent
it from being deleted, or unlock the
message.
• Details: access the MMS message
properties.
Email inbox (Menu 5.2.5)
This folder stores e-mails that you have
received.
Viewing an e-mail
1. Choose <Select> when Check new mail
displays to get new e-mails from the server.
The phone checks the e-mail server and
downloads new e-mails.
A ! icon next to a message means that the
e-mail is of high priority. A grey-coloured
e-mail icon indicates low priority.
Using e-mail options
While viewing the e-mail or header, select
<Options> to access the following options:
• Retrieve: retrieve the body of the e-mail
from the e-mail server.
Attached files from the Other files folder
cannot be opened in your phone.
• Save to My files: save the selected file.
• Reply: send a reply to the sender via e-mail
or MMS.
• Reply to all: send a reply to the sender and
all of the other recipients.
• Forward: forward the e-mail to other
people.
• Delete: delete the e-mail from the phone’s
memory or from both the phone’s memory
and the e-mail server.
• Add to block list: add the sender’s e-mail
address or subjects to the Block list.
• Cut address: extract URL addresses, e-mail
addresses, and phone numbers.
Messages (Menu 5)
2. Select an e-mail or header.
3. Press [ / ] to view other pages in the
e-mail.
Press and hold [ / ] to move to the first
or last page in the e-mail.
• View/Play: open the selected file.
Menu functions
The following icons may appear on the list to
show the e-mail status:
•
Retrieved from the server
•
Being retrieved
•
Failed to be retrieved
81
Menu functions
• Attached items: save the selected
attachment or all attachments from the
e-mail to your phone’s memory.
• Print via Bluetooth: print the e-mail by
connecting the phone to a printer via
Bluetooth.
Some printers may not be compatible with
the phone.
• Lock/Unlock: lock the e-mail to prevent it
from being deleted, or unlock the e-mail.
• Details: access the e-mail properties.
My folder (Menu 5.2.6)
Use this menu to view the messages you have
moved to this folder using the Move to my
folder option while viewing a message list.
82
Templates (Menu 5.3)
Use this menu to make and use templates of
frequently used messages.
Text template (Menu 5.3.1)
You can create SMS templates with the
sentences you use frequently so that you can
retrieve and insert them when composing an
SMS message.
Creating a template
1. Select an empty location.
2. Enter a message and press [
].
Using template options
From the template list, select <Options> to
access the following options:
• Edit: edit the template.
• Send: create and send a new message using
the selected template.
Multimedia message template
(Menu 5.3.2)
You can access embedded MMS templates or
ones you have saved so that you can use them
in composing an MMS message.
• Edit: edit the selected template.
• Add new: add a new template.
• Delete: delete the selected template or all
templates. You cannot delete the embedded
templates.
Menu functions
• Delete: delete the selected template or all
templates.
Delete all (Menu 5.4)
Use this menu to delete all messages in each
message type at once.
1. Select <Options> → Add new.
2. Create a template as you would when
creating an MMS message.
3. Select <Options> → Save in → Templates.
1. Select the message folders you want.
2. Select <Delete>.
3. Select <Yes> to confirm the deletion.
Using template options
From the template list, select <Options> to
access the following options:
• View: open the selected template.
• Send: send the template via MMS.
Settings (Menu 5.5)
Messages (Menu 5)
Creating a template
Use this menu to set up various options for
using the messaging services.
83
Menu functions
Text messages (Menu 5.5.1)
84
You can configure SMS settings.
• Sending options: set up the options for
sending SMS messages:
Reply path: allow recipients to reply to you
through your SMS server.
Request delivery receipt: set the network
to inform you when messages have been
delivered.
Validity period: set the length of time your
messages are stored in the SMS server.
Message type: set the default message
type. The network can convert messages
into the selected format.
Service centre: store or change the
number of SMS server.
• Receiving options: activate 3D view mode
for displaying received messages. The phone
will convert message text to 3D vivid
graphics. This option is available only when
the message consists of a single page.
• Block number: specify phone numbers
from which you want to reject.
Multimedia messages (Menu 5.5.2)
You can configure MMS settings.
• Sending options: set up the options for
sending MMS messages:
Request delivery receipt: set the network
to inform you when your messages have
been delivered.
Address hiding: set your address to be
hidden from the recipient’s phone.
Request read receipt: send a read-reply
request along with your messages.
Priority: set the priority level of your
messages.
Expiry: set the length of time your
messages are stored in the MMS server.
Delivery time: set a time delay before
messages are sent.
- Manual: the phone displays notifications.
Use the Retrieve option to manually
download new messages.
• Multimedia message profile: set up an
MMS profile and select a profile to be used.
Current profile: select a profile.
Profile settings: configure MMS profiles
using different MMS servers:
- Profile name: assign a name to the MMS
profile.
- Server URL: enter the address of your
MMS server.
- Proxy: connect to the GPRS network using
the proxy server.
- GPRS settings: customise the settings
required for connecting to the GPRS
network.
When the proxy is set to Enable:
IP address: enter the gateway address.
Menu functions
Messages (Menu 5)
• Receiving options: set up the options for
receiving MMS messages:
Anonymous reject: reject messages from
unknown senders.
Advert allowed: accept advertisements.
Report allowed: set the network to inform
the sender when a message has been
delivered to you.
Home network: determine if your phone
retrieves new messages automatically when
you are in your home service area.
Network when abroad: determine if your
phone retrieves new messages automatically
when you are roaming on another network.
Reception within home network or abroad
has the following options:
- Automatic: the phone automatically
retrieves messages from the server.
- Reject: the phone rejects all messages.
85
Menu functions
Port: enter the port number.
APN: enter the access point name used for
the address of the GPRS network.
Login ID: enter the user ID.
Password: enter the password.
When the proxy is set to Disable:
DNS1: enter the primary address.
DNS2: enter the secondary address.
APN: enter the access point name used for
the address of the GPRS network.
Login ID: enter the user ID.
Password: enter the password.
- Version: select an available OMA version
and maximum size limit for sending or
receiving messages.
Depending on your service provider, it
may not be possible to support the
maximum limit 300KB. In this case, try
again after changing the setting to 100KB.
86
• Block number: set the Block number list to
reject MMS messages from specific phone
numbers. Numbers specified here are also
included in the SMS Block number list.
• Message class: select the type of message
content you will add or the message size.
Text only: you can add only text of up to 30
KB.
Small imaging: you can add any type of
item, except for video, of up to 30 KB.
Moderate imaging: you can add any type
of item, except for video, of up to 100 KB.
Small video: you can add any type of item
of up to 100 KB.
Moderate video: you can add any type of
items of up to 300 KB.
• Creation mode: select an MMS creation
mode.
You can configure e-mails settings.
You cannot change e-mail profile and account
settings while an e-mail is being sent or
retrieved.
• Sending options: set up the options for
sending e-mails:
Send copy to self: send a copy of your
e-mail to your e-mail account.
87
Messages (Menu 5)
Emails (Menu 5.5.3)
Request delivery receipt: set the network
to inform you when e-mails have been
delivered.
Request read receipt: send a read-reply
request for a reply along with e-mails.
Priority: select the priority level of your
e-mail.
Add signature: attach your name, phone
number, or a simple memo to e-mails.
Edit name: edit the name in your signature.
Edit telephone number: edit the phone
number in your signature.
Edit note: edit the tag line in your
signature.
• Receiving options: set up the options for
receiving e-mails:
Check interval: determine how often the
phone checks the server for incoming
e-mails.
Menu functions
Warning: you can create a message with
any type of content and of any size, but the
phone will inform you when the content and
size have exceeded the maximum.
Free: you can create a message with any
type of contents and of any size.
Restricted: you can create a message with
the type of content and size specified in
Message class.
Menu functions
If you select Not used, you can use the
Check new mail feature to check your e-mail
manually.
Send read receipt: determine whether or
not the phone sends a read-reply for
incoming e-mails. If you select Announce,
the phone asks you to send a read-reply.
Retrieve option: set whether the phone
downloads e-mail headers only or both
e-mail headers and bodies.
Delete option: determine whether e-mails
are deleted immediately or the next time
you connect to the server.
Download limit: determine the maximum
size for incoming e-mails. Your phone will
reject e-mails that exceed the specified size.
Keep in server: leave the copies of e-mails
in the server after retrieving.
• Email accounts: set up an e-mail account
and select an account to be used:
Current account: select an account.
88
Account settings: configure e-mail
accounts using different e-mail servers.
Select <Create>, or select <Options> →
Create, if one has already been saved.
- In use: select this option to use the
account and to display the account in
Email inbox.
- Account name: enter a name for the
currently selected account.
To access the following options, select
<Options> → Next.
- User name: enter a user name.
- Email address: enter your e-mail
address.
- Reply address: enter your e-mil address
to be used when the recipient sends a
reply.
To access the following options, select
<Options> → Next.
- SMTP server: enter the IP address or host
name of the outgoing e-mail server.
- POP3 password: enter the POP3
password.
- APOP login: connect to the server by
using the APOP login scheme when this
option is selected.
- Secure connection (POP3): use a secure
connection for the e-mail service.
When the protocol type is IMAP4:
- IMAP4 server: enter the IP address or
host name of the server that receives your
e-mail.
- IMAP4 port: enter the IMAP4 port
number.
- Same ID and password: select if you
want to have the same user ID and
password with the outgoing e-mail server.
- IMAP4 user ID: enter the IMAP4 user
name.
- IMAP4 password: enter the IMAP4
password.
Menu functions
Messages (Menu 5)
- SMTP port: enter the SMTP port number.
- SMTP user ID: enter the SMTP user
name.
- SMTP password: enter the SMTP
password.
- Secure connection (SMTP): use a secure
connection for the e-mail service.
- Retrieve server type: select the protocol
for the incoming e-mail server. The
remaining options depend on the protocol
type setting.
When the protocol type is POP3:
- POP3 server: enter the IP address or host
name of the server that receives your
e-mail.
- POP3 port: enter the POP3 port number.
- Same ID and password: select if you
want to have the same user ID and
password with the outgoing e-mail server.
- POP3 user ID: enter the POP3 user name.
89
Menu functions
- Secure connection (IMAP4): use a
secure connection for the e-mail service.
- Include attachments: select this option
to receive attachments with e-mails.
- Email retrieval limit: set the number of
headers you will retrieve from the server.
• Email profiles: set up an e-mail profile and
select a profile to be used.
Current profile: select a profile.
Profile settings: configure e-mail profiles
using different e-mail servers. Set the
options for each profile:
- Profile name: enter a name for the e-mail
profile.
- APN: enter the access point name used for
the GPRS network address.
- Login ID: enter the user ID.
- Password: enter the password.
- DNS1: enter the primary address.
- DNS2: enter the secondary address.
90
• Block list: specify e-mail addresses or
subjects you want to reject.
Push messages (Menu 5.5.4)
You can change the settings for receiving push
messages from the wireless web server.
• Receive: set how your phone receives push
messages.
• Service centre: enter the address of the
server from which you want to receive push
messages, when the Receive option is set
to Text message-C specific.
SOS message (Menu 5.6)
In an emergency, you can send an SOS
message to your family or friends for help. You
can also receive an SOS message from other
people who are in an emergency. Use this menu
to specify options for sending and receiving an
SOS message.
• Recipients: specify the phone numbers to
which you want to send an SOS message.
• Repeat sending: set the number of times
the phone resends the SOS message.
• Incoming SOS alert: set whether or not
the phone uses the preset alert type (siren
and alert message) for incoming SOS
messages. If you select No, the phone uses
the message ringer setting.
You can view the onscreen help by selecting
<Options> → Help.
Broadcast messages (Menu 5.7)
The broadcast service delivers short messages
on various topics such as the weather or traffic.
Use this menu to change the settings for the
service and to access broadcast messages.
• Read: open received messages.
All broadcast messages are stored in the
Temporary folder and will be deleted when
you turn the phone off. If you do not want a
message to be deleted, save it to the
Archive folder. While viewing the message,
select <Options> → Save.
• Activation: enable or disable the reception
of broadcast messages.
Messages (Menu 5)
While the phone is attempting to send an
SOS message,
turns to red and you
cannot access menu functions in this mode.
To use the phone as normal, press [
]
when the icon turns to blue.
• Text: check the preset SOS message text.
Menu functions
• Message sending: activate or deactivate
the SOS message feature. To send an SOS
message, press [ / ] 4 times when the
keypad is locked.
91
Menu functions
• Receiving channels: specify the channels
from which you receive broadcast messages.
• Language: select the languages in which
broadcast messages display.
Please contact your service provider for details.
Memory status (Menu 5.8)
Use this menu to view the memory status for
text, multimedia, e-mail, or push messages.
You can also access a message folder by
selecting it from this menu.
92
My files
(Menu 6)
The My files menu allows you to access
images, videos, voice memos, music files,
sounds, and other files stored in the phone’s
memory or on a memory card.
To access this menu, select <Menu> in Idle
mode → My files.
Tips for Digital Rights Management
As a result of the Digital Rights Management
(DRM) system, some of the media items you
download from the Internet or receive by MMS
may require a licence key to access them. You
can acquire the key from the website which
owns the rights to the content; use the Activate
key option.
Note the following icons on the list:
•
: Forwardable item with a valid key.
•
: Forwardable item without a valid key.
•
: Unforwardable item with a valid key.
•
Images (Menu 6.1)
Viewing an image
1. Select an image folder.
2. Select an image.
Viewing a slide show
You can view your images as a slide show.
1. Select an image folder.
2. While viewing an image, select <Options>
→ Slide show.
Using image options
While viewing an image, select <Options> to
access the following options:
• List: return to the image list.
• Full screen view/Normal view: change
the view mode.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Set as: set the file as your wallpaper or as a
caller ID image for a Phonebook entry.
• Edit: edit the image using the Image editor
if it is a photo taken by the camera on the
phone.p. 57
• Activate key: get a new licence key when
the key for the selected DRM file expires.
My files (Menu 6)
This menu displays photos you have taken and
images you have downloaded, received in
messages, or imported from your computer.
3. Select a time interval. The slide show begins.
4. Select <Back> to stop the slide show.
Menu functions
: Unforwardable item without a valid
key.
Your service provider supports only countbased or unlimited-access DRM files.
93
Menu functions
• Reactivate key: get another licence key
even when the key for the selected DRM file
has not expired.
• Move to: move the file to another folder or
a memory card, if inserted.
• Copy to card: copy the selected file or all
files to a memory card, if inserted.
• Delete: delete the selected file.
• Rename: change the file name.
• Slide show: view all image as a slide show.
• Bluetooth visibility: share the file with
other Bluetooth devices.
• Print via: print the image by connecting the
phone to a printer via Bluetooth or USB.
• To print via USB, you first need to set the
USB mode to Pictbridge. p. 117
• Some printers may not be compatible with
the phone.
94
• Lock/Unlock: lock the file to prevent it from
being deleted, or unlock the file.
• Details: access the file properties.
• Key management: manage the licence
keys you have acquired.
Videos (Menu 6.2)
This menu displays video clips you have
recorded, downloaded, or received in
messages, or imported from your computer.
Video clips recorded on other devices, such as
camcorders, may not play correctly.
Playing a video clip
1. Select a video folder.
2. Select a video clip.
Key/Icon Function
/
Pauses playback.
/
Resumes playback.
Switches to Full screen mode.
Opens the file list.
Left
Returns to the previous file. Moves
backward in a file when held down.
Right
Skips to the next file. Skips forward
in a file when held down.
/
Adjusts the volume.
/right
soft key
Returns to the previous screen.
Down
Stops playback.
My files (Menu 6)
Up/
After playback, select <
> to access the
following options:
• Play: play the selected file.
• Send via: send the selected file via MMS,
e-mail, or Bluetooth.
• Set as caller image: set the file as a caller
ID image for a Phonebook entry.
• Activate key: get a new licence key when
the key for the selected DRM file expires.
• Reactivate key: get another licence key
even when the key for the selected DRM file
has not expired.
• Move to: move the file to another folder or
a memory card, if inserted.
• Copy to card: copy the file to a memory
card, if inserted.
• Delete: delete the file.
• Rename: change the file name.
Menu functions
During playback, use the following keys and
icons:
95
Menu functions
• Bluetooth visibility: share the selected file
with other Bluetooth devices.
• Lock/Unlock: lock the file to prevent it from
being deleted, or unlock the file.
• Details: access the file properties.
• Key management: manage the licence
keys you have acquired.
Music (Menu 6.3)
Use this menu to access music files you have
downloaded or imported from your computer.
Playing a music file
Select a file. The music player opens and the
selected music file plays. p. 53
When you close the music player, background
music will not continue unless the file is added
to the play list.
96
Sounds (Menu 6.4)
This menu displays the voice memos you have
recorded, and sound files you have
downloaded, received in messages, or imported
from your computer.
Playing a sound clip
1. Select a sound folder.
2. Select a sound clip. For a voice memo, see
Voice recorder.p. 56
While playing a sound clip, select <Options>
to access the following options:
• List: return to the sound list.
• Send via: send the selected file via MMS,
e-mail, or Bluetooth.
• Set as: set the file as your ringtone, as a
ringtone for a Phonebook entry, or as a
ringtone for alarms.
Other files (Menu 6.5)
Menu functions
Files that you have received but which are not
supported by your phone are stored in this
folder. You cannot open these files on the
phone.
From the file list, select <Options> to access
the following options:
• Send via: send the file via e-mail or
Bluetooth.
• Activate key: get a new licence key when
the key for the selected DRM file expires.
• Reactivate key: get another licence key
even when the key for the selected DRM file
has not expired.
• Move to card: move the selected file to a
memory card, if inserted or the phone’s
memory.
• Copy to card: copy the selected file to a
memory card, if inserted or the phone’s
memory.
My files (Menu 6)
• Activate key: get a new licence key when
the key for the selected DRM file expires.
• Reactivate key: get another licence key
even when the key for the selected DRM file
has not expired.
• Move to: move the file to another folder or
a memory card, if inserted.
• Copy to card: copy the file to a memory
card, if inserted.
• Delete: delete the file.
• Rename: change the file name.
• Bluetooth visibility: share the selected file
or the files you want with other Bluetooth
devices.
• Lock/Unlock: lock the file to prevent it from
being deleted, or unlock the file.
• Details: access the file properties.
• Key management: manage the licence
keys you have acquired.
97
Menu functions
•
•
•
•
Delete: delete the selected file or all files.
Rename: change the file name.
List by: change the sort order of the file list.
Bluetooth visibility: share the currently
selected file or the files you want with other
Bluetooth devices.
• Print via: print the image by connecting the
phone to a printer via USB or Bluetooth.
• To print via USB, you first need to set the
USB mode to Pictbridge.p. 117
• Some printers may not be compatible with
the phone.
• Lock/Unlock: lock the file to prevent it from
being deleted, or unlock the file.
• Details: access the file properties.
• Key management: manage the licence
keys you have acquired.
98
Memory card (Menu 6.6)
Use this menu to access the files stored on a
memory card. This menu is shown only when a
memory card is inserted into the phone.
• Your phone is preset to use FAT16-formatted
memory cards. If you insert a FAT32formatted memory card, the phone will ask
you to reformat the memory card. If you do
not, you will not be able to access the card
from the phone.
• If a folder on a memory card has subfolders
which exceed the maximum folder depth
supported by your phone’s file system, you
may not open or delete the maximum depth
subfolders on the phone.
Alarm (Menu 7.1)
You can check the total amount of memory for
media items and the amount of memory
currently in use in each media box. You can also
access a media box by selecting it from this
menu.
Use this menu to set alarms. The alert type for
a normal alarm corresponds to the call alert
type settings. A wake up alarm is not affected
by your sound settings.
Planner (Menu 7)
1. Select the type of alarm.
2. Select an alarm option.
• Alarm: activate the alarm.
• Alarm time: enter the time for the alarm
to ring.
• AM/PM: set AM or PM in 12-hour time
format.
• Alarm day: select the days on which you
want the alarm to sound. If you select
Once only, the alarm sounds at the
specified time and then is deactivated.
• Alarm tone: select an alarm tone.
Setting an alarm
Planner (Menu 7)
Use this menu to keep track of your schedule.
You can also use convenient features, such as
an alarm clock, calendar, memo pad, world
clock, calculator, convertor, timer, and
stopwatch.
To access this menu, select <Menu> in Idle
mode → Planner.
Menu functions
Memory status (Menu 6.7)
99
Menu functions
3. Select <Save>.
Stopping an alarm
• For an alarm, press any key.
• For a wake-up alarm, select <Confirm> or
press [
].
Press any key, except for <Confirm> and
[
], to cause it to sound again after 5
minutes.
Deactivating an alarm
1. Select the alarm you want to deactivate.
2. Select Off on the Alarm lines.
3. Select <Save>.
Setting alarms to sound when the
phone is off
From the Alarm screen, select Auto power →
On.
100
If the phone is off when it is time for the alarm
to sound, the phone switches on and sounds
the alarm.
Calendar (Menu 7.2)
Use this menu to keep track of your monthly
schedule.
When you access the Calendar menu, the
calendar in Month view appears with today’s
date indicated by a grey box.
Creating an item
You can store appointments, anniversaries,
tasks, and miscellaneous items on the calendar.
More than one item per day can be stored.
Entering an appointment or a
miscellaneous item
1. Select a date on the calendar.
• Repeat: (for Appointment) select to set
the item to recur.
• until: (for Appointment) select a repeat
unit and set the date to end the
repeating.
4. Select <Save> to save the item.
Entering an anniversary
Menu functions
1. Select a date on the calendar.
2. Select <Options> → Create →
Anniversary.
3. Enter information or change the settings:
• Occasion: enter information about the
anniversary.
• Date: enter the date.
• Alarm: select to set an alarm for the
anniversary.
• before: set how long before the
anniversary the alarm is to alert you.
Planner (Menu 7)
2. Select <Options> → Create →
Appointment or Miscellany.
3. Enter information or change the settings:
• Subject: enter a title for the item.
• Details: enter item details.
• Start date and Start time: enter the
starting date and time for the item.
• AM/PM: select AM or PM in 12-hour
time format.
• End date and End time: enter the
ending date and time for the item.
• AM/PM: select AM or PM in 12-hour
time format.
• Location: (for Appointment) enter
information about the appointed location.
• Alarm: select to set an alarm for the
item.
• before: set how long before the item the
alarm is to alert you.
• Alarm tone: select an alarm tone.
101
Menu functions
102
• Alarm time: enter the time for the alarm
to sound.
• AM/PM: select AM or PM in 12-hour
time format.
• Alarm tone: select an alarm tone.
• Repeat every year: set the phone to
remind you of the anniversary every year.
4. Select <Save> to save the anniversary.
• before: set how long before the task the
alarm is to alert you.
• Alarm time: enter the time for the alarm
to sound.
• AM/PM: select AM or PM in 12-hour
time format.
• Alarm tone: select an alarm tone.
4. Select <Save> to save the task.
Entering a task
Consulting the calendar
1. Select a date on the calendar.
2. Select <Options> → Create → Task.
3. Enter information or change the settings:
• Task: enter information about the task.
• Start date: enter the starting date.
• Due date: enter the ending date.
• Priority: select a priority level.
• Alarm: select to set an alarm for the
task.
Once you have created items, the item icons
and the number of items for a specific day
appears at the bottom of the calendar.
•
Appointments
•
Anniversaries
•
Tasks
•
Miscellaneous items
Viewing an item
• Print via Bluetooth: print the item details
by connecting the phone to a printer via
Bluetooth.
Some printers may not be compatible with
the phone.
Planner (Menu 7)
Using calendar options
On the calendar, select <Options> to access
the following options:
• View by: change the view mode of the
calendar.
• Create: add a new item.
• Go to: select today’s date or enter a specific
date.
• Event list: sort items by the type of item.
• Delete: delete items stored on the calendar
by using various deleting options.
• Settings: change the default settings for
the calendar:
Starting day: select which day of the week
the calendar starts with.
Menu functions
1. Select a date on the calendar to display the
items for that day.
2. Select an item to view its details.
3. Press [Left] or [Right] to access the other
items scheduled for the selected day.
While viewing an item, select <Options> to
access the following options:
• Edit: edit the item.
• Create: add a new item.
• Send via: send the item via SMS, MMS,
e-mail, or Bluetooth.
• View by: change the view mode of the
calendar.
• Done/Not done: change the status of the
task.
• Delete: delete the item.
103
Menu functions
Default view by: select the default
calendar view mode.
• Missed alarm events: access items whose
alarms you have missed.
• Memory status: access the memory
information for the items stored on the
calendar.
Viewing items in a different mode
You can change the calendar display to Day
view or Week view. Select <Options> → View
by → a view mode.
Day view
You can view items for the selected date. The
following icons will be displayed according to
the items type and status:
•
Alarm set
•
Recurring item
•
Completed task
104
•
Task priority (Orange: high, Light blue:
normal, and Grey: low)
Select an item to view its details.
Week view
You can view items for the selected week. A cell
on the timetable indicates the presence of item
information. Blue boxes indicate scheduled
items, and green boxes indicate miscellaneous
items.
Select the cell that contains the item you want.
Memo (Menu 7.3)
You can create a list of memos.
Creating a memo
1. Select <Options> → Create.
2. Enter the memo contents and press [
].
Use this menu to find out the current time in
another part of the world.
Some printers may not be compatible with
the phone.
• Memory status: check the number of
memos stored in the phone’s memory.
Viewing world time
1. From the world map, press [Left] or [Right]
to scroll to the city you want on the upper or
lower line. As the time line moves, the time
and date of the given zone display.
2. Press [
] to save the time zone.
Planner (Menu 7)
World clock (Menu 7.4)
Select a memo from the list.
While viewing a memo, select <Options> to
access the following options:
• Edit: edit the memo.
• Send via: send the memo via SMS, MMS,
e-mail, or Bluetooth.
• Delete: delete the memo.
• Print via Bluetooth: print the memo by
connecting the phone to a printer via
Bluetooth.
Menu functions
Viewing a memo
Applying daylight saving time
1. From the world map, select <Options> →
Apply daylight saving time.
2. Select the time zones you want.
3. Select <Save>.
105
Menu functions
Calculator (Menu 7.5)
Convertor (Menu 7.6)
Use this menu to perform arithmetic functions
such as addition, subtraction, multiplication,
and division.
Use this menu for common conversions, such
as length and temperature.
1. Enter the first number.
You can use a decimal point or a bracket, use
additional arithmetic functions, and switch to
the Convertor screen by selecting
<Options>.
2. Enter the operation for your calculation by
selecting arithmetic functions on the display.
3. Enter the second number.
4. Press [
] or select = on the display to
view the result.
5. If necessary, repeat from step 2 to continue
the calculation.
106
Performing a conversion
1.
2.
3.
4.
Select a type of convertor.
Select the original unit and press [Down].
Press [
].
Enter the value to be converted and press
[
].
5. Press [Down].
6. Select the unit to which you want to convert.
The equivalent value for the amount you
entered displays.
While entering the value, select ± on the
display to change the temperature to above
zero (+) or below zero (-).
Stopping the timer
Select <Options> to access the following
options:
• Clear: clear the current values.
• Reverse: reverse the conversion.
• Exchange rate: access the currency rate
list.
• Press any key to stop the timer when it
sounds.
• Select
or press [
] on the Timer
screen to stop the timer before it sounds.
Use this menu to set a period of time for the
phone to count down. The phone sounds an
alarm when the specified period of time expires.
Starting the timer
1. Select <Set>.
2. Enter the length of time you want to count
down and select <OK>.
3. Select
or press [
] to start counting
down.
Use this menu to measure elapsed time. The
maximum time is 10 hours.
Planner (Menu 7)
Timer (Menu 7.7)
Stopwatch (Menu 7.8)
Menu functions
Using convertor options
1. Select
or press [
] to start the
stopwatch.
2. Select
or press [
] to select an
interval. You can repeat this step for a total
of 4 intervals.
3. To reset the stopwatch, select <Reset>.
107
Menu functions
Camera
(Menu 8)
You can use the camera module embedded in
your phone to take photos and record videos.
To access this menu, select <Menu> in Idle
mode → Camera, or press [Camera].
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras
are not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
Take a photo (Menu 8.1)
The camera produces jpeg photos.
When you take a photo in direct sunlight or in
bright conditions, shadows may appear on the
photo.
108
Taking a photo
1. Access the Take a photo menu to turn on
the camera, and switch the display to
Capture mode. You can also press and hold
[Camera] in Idle mode.
2. Make any desired adjustments.
• Press [Up] or [Down] to zoom in or out.
• Press [Left] or [Right] to adjust the
brightness.
• Press [ ] to flip the image vertically.
• Press [ ] to show the mirror image.
• Select <
> to use the camera options.
next section
• Use the setting icons on the display to
change the camera settings or switch to
other modes.p. 110
3. Select
at the bottom of the display or
press [
] or [Camera] to take a photo.
The photo is saved in the My photos folder.
4. To
send the photo via
MMS, e-mail, or
Bluetooth
or press [
].
•
[C] → <Yes>.
return to Capture mode <Back>.
Using camera options in Capture mode
In Capture mode, select <
> to access the
following options:
• Record video: switch to Record mode.
• Shooting mode: take a photo in the
following modes:
Single shot: take a photo in Normal mode.
You can select whether or not the camera
automatically saves a photo.
•
•
•
•
109
Camera (Menu 8)
delete the photo
<Options>.
p. 111
Multi shot: take a series of action stills. You
can select the number of photos the camera
will take and the shooting speed.
Mosaic shot: take several stills and save
them in one frame. You can select the
layout.
Effects: change the colour tone or apply a
special effect.
Frames: apply a decorative frame.
Timer: set a time delay before the camera
takes a photo.
Go to My photos: access the My photos
folder.
Camera settings: change the default
settings for taking a photo.
Photo settings: change the following image
settings:
- Size: select an image size.
- Quality: select an image quality.
- Viewfinder mode: select a preview mode.
Menu functions
use photo options
Select
Menu functions
- Scene program: set whether or not to use
Night shot mode.
- Exposure metering: select a method to
determine the exposure of an image,
based on a specific area of the image.
- White balance: adjust the colour
temperature of the camera, depending on
the current lighting conditions. You can
make the photo look warmer or cooler.
- ISO: change the ISO setting, which
controls the sensitivity of your camera. For
low light situations, select a higher ISO
number. The higher the ISO number, the
faster the camera shutter functions and the
more sensitive the camera is to light.
Higher ISO settings may distort an image.
Preferences: change the following camera
settings:
- Shutter sound: select the sound that you
hear when you press the shutter.
110
- Zoom sound: turn the sound effect for
zooming on or off.
- Brightness sound: turn the sound effect
for brightness adjustment on or off.
- Default name: change the default prefix
of file names.
Using camera setting icons in Capture
mode
You can use the setting icons on the display to
customise your camera settings in Capture
mode.
Icon
Function
Switches to Record mode.p. 112
Switches to Night shot mode.
Selects a method to determine the
exposure of an image, based on a
specific area of the image.
Icon
Function
Changes the shooting mode.
Changes the image size.
Changes the image quality setting.
Changes the ISO setting.
Using photo options
After saving a photo, select <Options> to
access the following options:
• View: access one of the multi-shot photos.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Viewfinder: return to Capture mode.
• Set as: set the photo as your wallpaper or
as a caller ID image for a Phonebook entry.
Camera (Menu 8)
Changes the white balance.
• Edit: edit the image using the Image editor.
p. 57
• Delete: delete the file.
• Multi shot delete all: delete the multi-shot
photos you want.
• Rename: change the file name.
• Go to My photos: access the My photos
folder.
• Bluetooth visibility: share the selected file
or the files you want with other Bluetooth
devices.
• Print via: print the image by connecting the
phone to a printer via Bluetooth or USB.
Menu functions
Sets the timer
• To print via USB, you first need to set the
USB mode to Pictbridge. p. 117
• Some printers may not be compatible with
the phone.
• Lock/Unlock: lock the file to prevent it from
being deleted, or unlock the file.
• Details: access the file properties.
111
Menu functions
Record video (Menu 8.2)
You can record a video of whatever is displayed
on the camera screen.
Recording a video
1. Access the Record video menu to turn on
the camera and switch the display to Record
mode.
2. Make any desired adjustments.
• Press [Up] or [Down] to zoom in or out.
• Press [Left] or [Right] to adjust the
brightness.
• Press [ ] to flip the image vertically.
• Press [ ] to show the mirror image.
• Select <
> to use the camera options.
next section
• Use the setting icons on the display to
change the camera settings or switch to
other modes. p. 113
112
3. Select
at the bottom of the display or
press [
] or [Camera] to start recording.
4. Select < > or press [Camera] to stop
recording. The video is saved in the My
video clips folder.
5. To
Select
play back the video clip
or press [
>.p. 114
use video options
<
delete the video
[C] → <Yes>.
return to Record mode <
>.
Using camera options in Record mode
In Record mode, select <
> to access the
following options:
• Take a photo: switch to Capture mode.
• Effects: change the colour tone or apply a
special effect.
].
White balance: adjust the colour
temperature of the camera, depending on
the current lighting conditions. You can make
the video look warmer or cooler.
Scene program: set whether or not to use
Night shot mode.
Zoom sound: turn the sound effect for
zooming on or off.
Brightness sound: turn the sound effect
for brightness adjustment on or off.
Default name: change the default prefix of
file names.
Menu functions
Camera (Menu 8)
• Timer: set a time delay before the camera
starts recording a video.
• Go to My video clips: access the My video
clips folder.
• Camcorder settings: change the following
settings for recording a video:
Recording mode: select a video recording
mode.
Select Limit for multimedia messages or
Limit for emails to record a video suitable
for an MMS message or e-mail. The video
clip is saved in 3gp file format.
Select Normal to record a video within the
limit of the currently available memory. The
video clip is saved in mp4 file format.
Size: select a frame size.
Quality: select an image quality.
Viewfinder mode: select a preview mode.
Record audio: record a video with audio.
Using camera setting icons in Record
mode
You can use the setting icons on the display to
customise your camera settings in Record
mode.
113
Menu functions
Icon
Function
Switches to Capture mode.p. 108
Change the video recording mode.
Mutes or unmutes audio.
Sets the timer.
Switches to Night shot mode.
Changes the frame size.
Changes the image quality setting.
Changes the white balance.
Using video options
After saving a video clip, select <
> to
access the following options:
• Viewfinder: return to Record mode.
114
• Send via: send the file via MMS, e-mail,
Bluetooth.
• Set as caller image: set the file as a caller
ID image for a Phonebook entry.
• Delete: delete the file.
• Rename: change the file name.
• Go to My video clips: access the My video
clips folder.
• Bluetooth visibility: share the file with
other Bluetooth devices.
• Lock/Unlock: lock the file to prevent it from
being deleted, unlock the file.
• Details: access the file properties.
Go to My photos (Menu 8.3)
Use this menu to access a list of photos you
have taken.p. 93
Go to My video clips (Menu 8.4)
Settings
(Menu 9)
Time and date (Menu 9.1)
Use this menu to set the current time and date
on your phone.
• Home zone: set your home time zone.
Select the city that corresponds to your
home zone. To set the daylight saving time,
select Set daylight saving time.
Settings (Menu 9)
The Settings menu provides you with various
setting options to customise the phone to your
preferences and needs. You can also reset the
settings to their default values.
To access this menu, select <Menu> in Idle
mode → Settings.
• Time: enter the current time.
• AM/PM: select AM or PM in 12-hour time
format.
• Time format: select a time format.
• Date: enter the current date.
• Date format: select a date format.
• Auto update: activate the auto time update
feature. Your phone will read the MCC
(Mobile Country Code) from the network and
automatically update the current time for the
country that you are in when you travel
abroad.
Menu functions
Use this menu to access a list of videos you
have recorded.p. 94
Time information may not be updated when
you move to one time zone to another within
a country.
Phone settings (Menu 9.2)
Many different features of your phone’s system
can be customised to suit your preferences.
115
Menu functions
Language (Menu 9.2.1)
Use this menu to select a language for the
display.
Greeting message (Menu 9.2.2)
Use this menu to enter the greeting that is
displayed briefly when the phone is switched
on.
Shortcuts (Menu 9.2.3)
You can use the Navigation keys as shortcut
keys to access specific menus directly from Idle
mode. Use this menu to assign a shortcut to a
key.
Idle shortcuts (Menu 9.2.4)
Assigning a shortcut to a key
1. Remove the check mark from the list.
2. Select the menu you want.
3. Select <Save>.
1. Select the key to be used as a shortcut key.
2. Select the menu that will be assigned to the
key.
116
Using shortcut options
Select <Options> to access the following
options:
• Assign: assign a shortcut menu.
• Change: change a shortcut menu.
• Remove: deactivate the shortcut
assignment to the selected key.
• Remove all: deactivate all shortcut
assignments.
Use this menu to change the shortcut icons on
the idle screen. The
icon is fixed. You can
set shortcut icons up to 2.
Volume key (Menu 9.2.5)
Use this menu to select a USB mode to be used
when you connect your phone to a PC or printer
via USB.
• Modem: select to use your phone as a
modem.
• Mass storage: select to access a memory
card, if a memory card is inserted.
Extra settings (Menu 9.2.7)
You can turn the automatic redialling or
answering features on or off.
• Auto redial: set the phone to make up to
ten attempts to redial a phone number after
an unsuccessful call.
• Anykey answer: answer an incoming call
by pressing any key, except for <Reject>,
[ / ], [HOLD] and [ ].
• Voice clarity: remove extraneous noise and
increase call quality so that the person with
whom you are speaking can hear you clearly
even if you are in a noisy place.
• Auto keypad lock: set the phone to lock
the keypad automatically when the display
turns off.
Settings (Menu 9)
USB settings (Menu 9.2.6)
• Pictbridge: select to connect your phone to
a PictBridge-compatible printer.
Menu functions
Use this menu to change the volume key
settings.
• Volume key function: set whether the
phone mutes the call ringer or rejects a call
if you press and hold [ / ] when a call
comes in. You can also set whether the
phone sends an SMS message to the caller
when a call is rejected.
• Text message: enter a message to be sent
to the caller when a call is rejected.
117
Menu functions
Offline mode (Menu 9.2.8)
Text display (Menu 9.3.2)
Use this menu to switch the phone to Offline
mode, or back to Online mode.
You can change the display settings for the text
displayed on the idle screen.
• Text position: select a position. If you do
not want text to display in Idle mode, select
Off.
• Text style: select a font style.
• Text colour: select a font colour.
Display settings (Menu 9.3)
Use this menu to change settings for the display
and light.
Wallpaper (Menu 9.3.1)
You can change the settings for the background
image.
• Wallpaper: select a background image in
Idle mode.
• Menu background: set whether to display
the same background image in Menu mode.
• Transparency: adjust the transparency of
the menu background image.
118
Skin (Menu 9.3.3)
You can select a skin colour pattern for Menu
mode.
Brightness (Menu 9.3.4)
You can adjust the brightness of the display for
varying lighting conditions.
Use this menu to select a volume level and alert
type for incoming calls.
• Alert type: specify how you are to be
informed of incoming calls.
• Ring tone: select a ringtone for the call
ringer.
• Volume: select a ringer volume.
Show caller ID (Menu 9.3.6)
Use this menu to set the phone to display
missed call notifications with the most recently
missed caller’s information.
TV-out (Menu 9.3.7)
Use this menu to select a video system of your
TV.
Sound settings (Menu 9.4)
Settings (Menu 9)
Incoming call (Menu 9.4.1)
Use this menu to customise the settings for
numbers entered and the background colour of
the display while dialling.
Menu functions
Dialling display (Menu 9.3.5)
Keypad tone (Menu 9.4.2)
Use this menu to select the tone that the phone
sounds when you press a key.
You can adjust the key tone volume using
[ / ] in Idle mode.
Use this menu to customise various sound
settings.
119
Menu functions
Message tone (Menu 9.4.3)
Silent mode (Menu 9.4.6)
Use this menu to set up the ringtone for
incoming messages.
• Alert type: specify how you are informed
when a message comes in.
• Tone: select one of the several message
tones.
• Repetition: specify how often the phone
informs you of a new message.
Use this menu to set how the phone acts to
alert you to a specific event in Silent mode.
Touch tone (Menu 9.4.4)
Use this menu to select the melody that the
phone sounds when you touch the screen.
Power-on/off tone (Menu 9.4.5)
Use this menu to select the melody that the
phone sounds when it is switched on or off.
120
Extra tones (Menu 9.4.7)
Use this menu to customise additional tones for
the phone.
• Minute minder: set the phone to beep
every minute during an outgoing call to keep
you informed of the length of your call.
• Connection tone: set the phone to beep
when an outgoing call is connected to the
system.
• Alerts on call: set the phone to beep when
you receive a new message or when the time
for an alarm comes during a call.
• Indicative tone: set the phone to beep
when a pop-up window displays.
Touch settings (Menu 9.5)
Calibration (Menu 9.5.1)
Handwriting (Menu 9.5.2)
You can change the settings for using
Handwriting mode.
• Style: select a pen type. You can also select
a line thickness of the pen, or a pen colour.
Light settings (Menu 9.6)
Use this menu to change settings for the light.
Settings (Menu 9)
You can calibrate your phone's touch screen.
When you turn on the phone for the first time
or if the screen does not recognise your touches
or reacts incorrectly to your touches, you need
to recalibrate the phone. Tap the cross hair
object firmly and precisely.
• Recognition: set the number of the text
input fields so that you can enter characters,
switching between text input fields. You can
also select the time interval for entering a
character by tapping
.
Menu functions
Use this menu to change the setting for using
the touch screen.
Backlight time (Menu 9.6.1)
You can select the length of time the backlight
or display stays on.
• On: select the length of time the backlight
stays on.
• Dim: select the length of time the display
stays on in Dim mode after the backlight
turns off. After a specified time, the display
turns off.
• During charging: set whether or not to
activate Dim mode while charging your
phone.
121
Menu functions
Keypad light (Menu 9.6.2)
You can set how the phone controls the use of
the keypad light.
• Any time: the keypad light is always used.
• Night time: the keypad light is used only
between 5:00 PM and 9:00 AM.
• Custom time: you can specify the time
period that the keypad light is used.
Network services (Menu 9.7)
Use this menu to access network services.
Please contact your service provider to check
their availability and subscribe to them, if you
wish.
Call diverting (Menu 9.7.1)
This network service reroutes incoming calls to
a phone number that you specify.
122
1. Select a call diverting option:
• Divert always: divert calls.
• Busy: divert calls when you are on
another call.
• No reply: divert calls when you do not
answer the phone.
• Unreachable: divert calls when you are
not in your service area or when your
phone is switched off.
• Cancel all: cancel all call diverting
options.
2. Select the type of calls to be diverted.
3. Select Activate. To deactivate call diverting,
select Deactivate.
4. Move to the Divert to line.
5. Enter the number to which calls are to be
diverted and choose <Select>.
6. If you selected No reply, move to the Sec
line and select the length of time the
network delays before diverting a call.
Call barring (Menu 9.7.2)
Settings (Menu 9)
1. Select a call barring option:
• All outgoing: prohibit outgoing calls.
• International: prohibit international
calls.
• International except home: only allow
calls to numbers within the current
country when you are abroad, and to your
home country.
• All incoming: prohibit incoming calls.
• Incoming while abroad: prohibit
incoming calls when you use your phone
outside of your home service area.
• Cancel all: cancel all call barring
settings, allowing to be sent and received
normally.
• Change barring password: change the
call barring password obtained from your
service provider.
2. Select the type of calls to be barred.
3. Select Activate. To deactivate call barring,
select Deactivate.
4. Enter the call barring password supplied by
your service provider and choose <Select>.
Menu functions
This network service allows you to restrict your
calls.
Call waiting (Menu 9.7.3)
This network service informs you when
someone is trying to reach you while you are on
another call.
1. Select the type of calls to which the call
waiting option will apply.
2. Select Activate. To deactivate call waiting,
select Deactivate.
123
Menu functions
Network selection (Menu 9.7.4)
Voice mail server (Menu 9.7.6)
This network service allows you to manually
select the network to be used while roaming
outside of your home area, or to let the network
be chosen automatically. You can select a
network other than your home network only if
there is a valid roaming agreement between the
two.
Use this menu to store the number of the
voicemail server and access your voicemails.
Caller ID (Menu 9.7.5)
This network service allows you to hide your
phone number from the person you are calling.
However, some networks do not allow the user
to change this setting. If you select Default,
the phone will use the default setting provided
by the network.
124
Your service provider can give you the voicemail
server number.
• Connect to voice server: connect to the
voicemail server to allow you to listen to
your messages.
• Voice server number: enter the voicemail
server number.
Band selection (Menu 9.7.7)
For the phone to make and receive phone calls,
it must register with an available network.
Your phone can handle any of the following
types of networks: Combined GSM 900/1800,
GSM 1900, and Tri band (GSM 900/1800/
1900).
Security (Menu 9.8)
Phone lock (Menu 9.8.3)
Use this menu to protect the phone against
unauthorised use by managing the several
access codes of your phone and SIM card.
The Phone lock feature locks the phone from
unauthorised use.
When this feature is enabled, you must enter a
4- to 8-digit phone password each time the
phone is switched on.
The password is preset to 00000000. To
change the password, use the Change
password menu.
If you enter an incorrect PIN/PIN2 three times,
the SIM card is blocked. To unblock it, you need
to enter your PUK/PUK2 (Personal Unblocking
Key). The codes are supplied by your network
operator.
PIN check (Menu 9.8.1)
The 4- to 8-digit PIN (Personal Identification
Number) protects your SIM card against
unauthorised use. When this feature is enabled,
the phone requires your PIN each time it is
switched on.
Use this menu to change your PIN. The PIN
check feature must be enabled to use this
feature.
Settings (Menu 9)
Change PIN (Menu 9.8.2)
Menu functions
The country where you purchased your phone
determines the default band that it uses. When
you travel abroad, you must remember to
change to an appropriate band.
Change password (Menu 9.8.4)
Use this menu to change your phone password.
125
Menu functions
Privacy (Menu 9.8.5)
FDN mode (Menu 9.8.7)
Use this menu to lock access to call logs,
Phonebook, or your media contents, including
messages, media files, and document files.
If supported by your SIM card, Fixed Dialling
Number (FDN) mode restricts your outgoing
calls to a limited set of phone numbers. When
this feature is enabled, you can make calls only
to phone numbers stored on the SIM card.
1. Select the items to lock.
2. Select <Save> to lock the marked items.
3. Enter the phone password and select <OK>.
To access a locked item, you need to enter the
phone password.
126
Change PIN2 (Menu 9.8.8)
If supported by your SIM card, use this menu to
change your current PIN2.
SIM lock (Menu 9.8.6)
Mobile tracker (Menu 9.8.9)
The SIM lock feature allows your phone to work
only with the current SIM by assigning a SIM
lock code. You must enter the SIM lock code to
use a different SIM card.
When someone tries to use your phone with
another SIM card, the phone will automatically
send the preset tracking message to your
family or friends. You can check the phone
number from which the messages are sent and
then track your phone. This feature is useful
when the phone is stolen or lost.
Use this menu to check the amount of memory
being used for storing data in Shared memory,
Messages, My files, Calendar, Phonebook, JAVA
world, and Memo.
Reset settings (Menu 9.10)
Use this menu to reset the phone settings,
display settings, sound settings, and light
settings individually.
Settings (Menu 9)
1. Enter the phone password and select <OK>.
2. Specify the following options:
• Mobile tracker: activate the Mobile
tracker feature.
• Recipients: specify phone numbers to
which you want to send the tracking
messages.
• Sender: enter the sender’s name.
• Message: check the preset tracking
message text.
3. When you have finished, press <Save>.
4. Press <Accept> if you agree to the terms
and conditions of service listed on the
screen.
Memory status (Menu 9.9)
Menu functions
Sending of the tracking message will be billed
to the user of the unauthorised SIM card. To
use your phone with any other SIM card, you
must first deactivate the mobile tracking
feature.
1. Select the setting categories to be reset.
2. Select <Reset> to reset the marked items
→ <Yes>.
3. Enter the phone password and select <OK>.
The password is preset to 00000000. You
can change this password. p. 125
127
Menu functions
Key management (Menu 9.11)
Use this menu to manage the licence keys you
have acquired to activate media files locked by
DRM systems.
Select <Options> to access the following
options:
• View: open the corresponding item.
• Delete: delete the selected licence key.
• Go to My Messages: access the message
that contains the media file.
• Go to My Items: access the corresponding
file folder.
• Go to Java: access the corresponding
game.
• Details: access the properties of the licence
key.
128
Solve problems
Help and personal needs
To save the time and expense of an
unnecessary service call, perform the simple
checks in this section before contacting a
service professional.
When you switch on your phone, the
following messages may appear:
“Insert SIM”
• Be sure that the SIM card is correctly
installed.
“Phone lock”
• The automatic locking function has been
enabled. You must enter the phone’s
password before you can use the phone.
“Enter PIN”
• You are using your phone for the first time.
You must enter the PIN supplied with the
SIM card.
• The PIN check feature is enabled. Every time
the phone is switched on, the PIN has to be
entered. To disable this feature, use the PIN
check menu.
“Enter PUK”
• The PIN code has been entered incorrectly
three times, and the SIM card is now
blocked. Enter the PUK supplied by your
service provider.
“No Service,” “Network Failure,” or “Not
Done” displays
• The network connection has been lost. You
may be in a weak signal area. Move and try
again.
• You are trying to access an option for which
you have no subscription with your service
provider. Contact the service provider for
further details.
129
Solve problems
130
You have entered a number but it was not
dialled
• Be sure that you have pressed [
].
• Be sure that you have accessed the right
cellular network.
• Be sure that you have not set an outgoing
call barring option.
• Be sure that you are holding the phone close
enough to your mouth. The microphone is
located at the bottom of the phone.
Your correspondent cannot reach you
• Be sure that your phone is switched on.
([ ] pressed for more than one second.)
• Be sure that you have accessed the right
cellular network.
• Be sure that you have not set an incoming
call barring option.
The audio quality of the call is poor
• Check the signal strength indicator on the
display (
). The number of bars indicates
the signal strength from strong (
) to
weak ( ).
• Try moving the phone slightly or moving
closer to a window if you are in a building.
Your correspondent cannot hear you
speaking
• Be sure that you have switched off the
microphone.
No number is dialled when you re-call a
Contacts entry
• Use the Contact list feature to ensure the
number has been stored correctly.
The phone starts beeping and “Battery
low” flashes on the display
• Your battery is insufficiently charged.
Recharge the battery.
• Re-store the number, if necessary.
The battery does not charge properly or
the phone sometimes turns itself off
• Wipe the charging contacts both on the
phone and on the battery with a clean soft
cloth.
If the above guidelines do not help you to
solve the problem, take note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung
after-sales service.
Health and safety information
SAR certification information
This phone meets European Union (EU)
requirements concerning exposure to radio
waves.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured to not
exceed the limits for exposure to radiofrequency (RF) energy, as recommended by the
EU Council. These limits are part of
comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines were developed by
independent scientific organisations through
the periodic and thorough evaluation of
scientific studies. The limits include a
substantial safety margin designed to ensure
the safety of all persons, regardless of age and
health.
131
Health and safety information
The exposure standard for mobile phones
employs a unit of measurement known as
Specific Absorption Rate (SAR). The SAR limit
recommended by the EU Council is 2.0 W/kg.1
The highest SAR value for this model phone was
0.673 W/kg.
SAR tests are conducted using standard
operating positions with the phone transmitting
at its highest certified power level in all tested
frequency bands. Although the SAR is
determined at the highest certified power level,
the actual SAR level of the phone while
operating can be well below the maximum
value.
This is because the phone is designed to
1. The SAR limit for mobile phones used by the public is
2.0 watts/kilogram (W/kg) averaged over ten grams of
body tissue. The limit incorporates a substantial margin
of safety to give additional protection for the public and
to account for any variations in measurements. The SAR
values may vary, depending on national reporting
132 requirements and the network band.
operate at multiple power levels so as to use
only the power required to reach the network.
In general, the closer you are to a base station,
the lower the power output of the phone.
Before a new model phone is available for sale
to the public, compliance with the European
R&TTE Directive must be shown. This directive
includes as one of its essential requirements the
protection of the health and safety of the user
and any other person.
Precautions when using batteries
• Never use a charger or battery that is
damaged in any way.
• Use the battery only for its intended
purpose.
• If you use the phone near the network’s
base station, it uses less power. Talk and
standby time are greatly affected by the
signal strength on the cellular network and
the parameters set by the network operator.
battery will be reduced. Try to keep the
battery at room temperature. A phone with a
hot or cold battery may not work
temporarily, even when the battery is fully
charged. Li-ion batteries are particularly
affected by temperatures below 0°C (32°F).
• Do not short-circuit the battery. Accidental
short-circuiting can occur when a metallic
object like a coin, clip or pen causes a direct
connection between the + and – terminals of
the battery (metal strips on the battery). For
example, do not carry a spare battery in a
pocket or bag where the battery may contact
metal objects. Short-circuiting the terminals
may damage the battery or the object
causing the short-circuiting.
• Dispose of used batteries in accordance with
local regulations. Always recycle. Do not
dispose of batteries in a fire.
Health and safety information
• Battery charging time depends on the
remaining battery charge, the type of
battery, and the charger used. The battery
can be charged and discharged hundreds of
times, but it will gradually wear out. When
the operation time is noticeably shorter than
normal, it is time to buy a new battery.
• If left unused, a fully charged battery will
discharge itself over time.
• Use only Samsung-approved batteries, and
recharge your battery only with Samsungapproved chargers. Disconnect the charger
from the power source when it is not in use.
Do not leave the battery connected to a
charger for more than a week, since
overcharging may shorten its life.
• Extreme temperatures will affect the
charging capacity of your battery: it may
require cooling or warming first.
• Do not leave the battery in hot or cold places
because the capacity and lifetime of the
133
Health and safety information
Road safety
Your wireless phone gives you the powerful
ability to communicate by voice, almost
anywhere, anytime. But an important
responsibility accompanies the benefits of
wireless phones, one that every user must
uphold.
When driving a car, driving is your first
responsibility. When using your wireless phone
while driving, follow local regulations in the
country or region you are in.
Operating environment
Remember to follow any special regulations in
force in the area you are in, and always switch
off your phone whenever it is forbidden to use
it, or when it may cause interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for
134
detailed safety instructions. Do not connect
incompatible products.
As with other mobile radio transmitting
equipment, users are advised that for the
satisfactory operation of the equipment and for
the safety of personnel, it is recommended that
the equipment should only be used in the
normal operating position (held to your ear with
the antenna pointing over your shoulder).
Electronic devices
Most modern electronic equipment is shielded
from radio frequency (RF) signals. However,
certain electronic equipment may not be
shielded against the RF signals from your
wireless phone. Consult the manufacturer to
discuss alternatives.
Other medical devices
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with
the pacemaker. These recommendations are
consistent with the independent research and
recommendations of Wireless Technology
Research. If you have any reason to suspect
that interference is taking place, switch off your
phone immediately.
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from
external RF energy.
Your physician may be able to assist you in
obtaining this information.
Switch off your phone in health care facilities
when regulations posted in these areas instruct
you to do so.
Hearing aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your
hearing aid manufacturer to discuss
alternatives.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in
motor vehicles. Check with the manufacturer or
its representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Health and safety information
Pacemakers
135
Health and safety information
Posted facilities
Switch off your phone in any facility where
posted notices require you to do so.
Potentially explosive environments
Switch off your phone when in any area with a
potentially explosive atmosphere, and obey all
signs and instructions. Sparks in such areas
could cause an explosion or fire resulting in
bodily injury or even death.
Users are advised to switch off the phone while
at a refuelling point (service station). Users are
reminded of the need to observe restrictions on
the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical
plants, or where blasting operations are in
progress.
Areas with a potentially explosive atmosphere
are often but not always clearly marked. They
include the areas below decks on boats,
136
chemical transfer or storage facilities, vehicles
using liquefied petroleum gas, such as propane
or butane, areas where the air contains
chemicals or particles, such as grain, dust or
metal powders, and any other area where you
would normally be advised to turn off your
vehicle engine.
Emergency calls
This phone, like any wireless phone, operates
using radio signals, wireless, and landline
networks as well as user-programmed
functions, which cannot guarantee connection
in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
communications like medical emergencies.
To make or receive calls, the phone must be
switched on and in a service area with adequate
signal strength. Emergency calls may not be
possible on all wireless phone networks or when
1. Switch on the phone.
2. Key in the emergency number for your
present location. Emergency numbers vary
by location.
3. Press [
].
Certain features like Call Barring may need to
be deactivated before you can make an
emergency call. Consult this document and
your local cellular service provider.
Other important safety information
• Only qualified personnel should service the
phone or install the phone in a vehicle.
Faulty installation or service may be
dangerous and may invalidate any warranty
applicable to the device.
• Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
• Do not store or carry flammable liquids,
gases, or explosive materials in the same
compartment as the phone, its parts, or
accessories.
• For vehicles equipped with an air bag,
remember that an air bag inflates with great
force. Do not place objects, including
installed or portable wireless equipment, in
the area over the air bag or in the air bag
deployment area. Improperly installed
wireless equipment could result in serious
injury if the air bag inflates.
• Switch off your phone before boarding an
aircraft. It is dangerous and illegal to use
wireless phones in an aircraft because they
can interfere with the operation of the
aircraft.
Health and safety information
certain network services and/or phone features
are in use. Check with local service providers.
To make an emergency call:
137
Health and safety information
• Failure to observe these instructions may
lead to the suspension or denial of telephone
services to the offender, or legal action, or
both.
Care and maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care.
The suggestions below will help you fulfill any
warranty obligations and allow you to enjoy this
product for many years.
• Keep the phone and all its parts and
accessories out of the reach of small children
and pets. They accidentally damage these
things or choke on small parts.
• Keep the phone dry. Precipitation, humidity,
and liquids contain minerals that corrode
electronic circuits.
138
• Do not use the phone with a wet hand. Doing
so may cause an electric shock to you or
damage to the phone.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of
electronic devices, damage batteries, and
warp or melt certain plastics.
• Do not store the phone in cold areas. When
the phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s
electronic circuit boards.
• Do not drop, knock, or shake the phone.
Rough handling can break internal circuit
boards.
• Do not use harsh chemicals, cleaning
solvents, or strong detergents to clean the
phone. Wipe it with a soft cloth.
• If the phone, battery, charger, or any
accessory is not working properly, take it to
your nearest qualified service facility. The
personnel there will assist you, and if
necessary, arrange for service.
Health and safety information
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
• Do not put the phone in or on heating
devices, such as a microwave oven, stove, or
radiator. The phone may explode when
overheated.
• When the phone or battery gets wet, the
label indicating water damage inside the
phone changes colour. In this case, phone
repairs are no longer guaranteed by the
manufacturer's warranty, even if the
warranty for your phone has not expired.
• If your phone has a flash or light, do not use
it too close to the eyes of people or animals.
This may cause damage to their eyes.
• Use only the supplied or an approved
replacement antenna. Unauthorised
antennas or modified accessories may
damage the phone and violate regulations
governing radio devices.
139
Index
A
Alarm • 99
Answering
call • 39
second call • 41
Anykey answer • 117
Auto redial • 117
B
Background image • 118
Backlight time, set
display • 121
keypad • 122
Band selection • 124
Barring, calls • 123
Battery
charging • 7
low indicator • 8
precautions • 132
Bluetooth
receiving, data • 62
140
sending, data • 61
settings • 60
Broadcast messages • 91
Browser, web • 67
C
Calculator • 106
Calendar • 99
Call costs • 45
Call records
dialled • 44
missed • 44
received • 44
Call time • 45
Caller group • 49
Caller ID • 124
Calls
answering • 39
barring • 123
diverting • 122
holding • 41
making • 38
redialling • 39
rejecting • 39
waiting • 123
Camera
photos • 108
videos • 112
CB (Cell Broadcast) messages •
91
Characters, enter • 32
Connection tone • 120
Convertor • 106
Creating messages
e-mail • 75
MMS • 73
SMS • 71
D
Date, set • 115
Deleting
calendar items • 103
E
E-mails
creating/sending • 75
deleting • 81
setting • 87
viewing • 80
Emergency calls • 136
English mode, text input • 35
F
FDN (Fixed Dialling Number)
mode • 126
File manager • 92
Inbox, messages
e-mail • 80
MMS/SMS • 76
International calls • 39
Internet • 67
K
Games • 62, 63
Greeting message • 116
Key management • 128
Key tones
selecting • 119
sending/muting • 42
volume • 119
Keyboard mode • 37
Keypad mode • 35
H
L
G
Handwriting mode • 32
Health and safety • 131
Holding, call • 41
I
Icons, description • 10
Image editor • 57
Images, downloaded • 93
Index
call logs • 44
contacts • 46, 51
e-mail • 81, 83
MMS • 78, 80, 83
SMS • 77, 80, 83
Dialled calls • 44
Dialling display, set • 119
Display
backlight, set • 121
brightness • 118
icons • 10, 11
language • 116
layout • 10
settings • 118
Diverting, calls • 122
Document files • 97
DRM (Digital Rights Management)
• 92
DTMF tones, send • 42
Language, select • 116
Last number, redial • 39
Light settings • 121
Locking
media contents • 126
phone • 125
SIM card • 126
Low battery indicator • 8
141
Index
M
Memory card
accessing files • 98
installing • 31
Memory status
contacts • 51
file manager • 99
messages • 92
phone • 127
Menu style • 118
Message tone • 120
Messages
cell broadcast • 91
configuration • 78
e-mail • 75
greeting • 116
MMS • 73
push • 78
SMS • 72
Minute minder • 120
Missed calls • 44
MMS messages
creating/sending • 73
142
deleting • 78
setting • 84
viewing • 76
Mobile tracker • 126
Multiparty-call • 42
Music player • 52
Music, downloaded • 96
My files • 92
N
Name card • 50
Names
entering • 32
searching • 46
Network band, select • 124
Network selection • 124
Network services • 122
Numbers
searching • 46
storing • 47
O
Offline mode • 118
Outbox, messages • 79
P
Password
call barring • 123
phone • 125
Phone
care and maintenance •
138
display • 10
icons • 10
locking • 125
password • 125
resetting • 127
switching on/off • 8
unpacking • 6
Phonebook
adding • 47
deleting • 46, 51
editing • 46
managing • 51
options • 46
searching • 46
R
Received calls • 44
Received messages
e-mail • 80
MMS/SMS • 76
Recording
videos • 112
voice memos • 55
Redialling
automatically • 117
manually • 39
Resetting phone • 127
Ringer
incoming calls • 119
messages • 120
Road safety • 134
Roaming • 124
S
Safety
information • 131
precautions • 1
Security, calls • 125
Sentbox, messages • 80
Shortcut • 116
Silent mode
entering • 16
setting • 120
SIM card
inserting • 7
locking • 126
Skin colour • 118
Slide settings • 116
SMS messages
creating/sending • 72
deleting • 77
setting • 84
viewing • 76
Sound settings • 119
Sounds, downloaded • 96
Speed dial • 49
Stopwatch • 107
Switching on/off
microphone • 42
phone • 8
Index
speed dialling • 49
Photos
editing • 57
taking • 108
viewing • 93
PIN, change • 125
PIN2, change • 126
Power on/off tone • 120
Privacy • 126
Problems, solve • 129
Push messages • 78, 90
T
T9 mode, text input • 36
Templates, message • 82
Text, enter • 32
Time, set • 115
Timer • 107
TV out • 20, 28
U
USB settings • 117
143
Index
V
Videos
playing • 94
recording • 112
Voice recorder
playing • 56
recording • 55
Voicemail server • 124
W
Waiting call • 123
Wallpaper • 118
Web browser
access • 67
bookmarks • 69
World time • 105
144
* Depending on the software installed or your service provider or country, some of the descriptions in
this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear different from the illustrations
in this guide.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-12558A
English (SEA). 11/2006. Rev. 1.0