Canon POWERSHOT A75 User guide

Add to my manuals
155 Pages

advertisement

Canon POWERSHOT A75 User guide | Manualzz

ENGLISH

Camera User Guide

CDI-E123-010 © 2004 CANON INC.

PRINTED IN MALAYSIA z Please read the Read This First section (p. 7).

z Please also see the Software Starter Guide and the Direct Print User Guide.

Flowchart and Reference Guides

This Guide

Shooting with the Camera

Software Starter Guide

Installing the Software

This Guide

Connecting the Camera to a Computer

This Guide

Software Starter Guide

Downloading Images to a Computer

Direct Print User Guide

Printer User Guide

Using the Printer and Printing

Use of genuine Canon accessories is recommended.

This product is designed to perform optimally when used with genuine Canon accessories.

Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this warranty does not apply to repairs arising out of the malfunction of non-genuine Canon accessories, although you may request such repairs on a chargeable basis.

1

Camera Body Temperature

If your camera is used for prolonged periods, the camera body may become warm. Please be aware of this and take care when operating the camera for an extended period.

About the LCD Monitor

The LCD monitor is produced with extremely highprecision manufacturing techniques. More than

99.99% of the pixels operate to specification. Less than 0.01% of the pixels may occasionally misfire or appear as red or black dots.

This has no effect on the recorded image and does not constitute a malfunction.

Video Format

Please set the camera's video signal format to the one used in your region before using it with a TV monitor (p. 113).

Language Setting

Please see page 24 to change the language setting.

Please read through the Read This First section

(p. 7) before using your camera.

2

Disclaimer

While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. Canon reserves the right to change the specifications of the hardware and software described herein at any time without prior notice.

No part of this guide may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without the prior written permission of Canon.

Canon makes no warranties for damages resulting from corrupted or lost data due to a mistaken operation or malfunction of the camera, the software, the CompactFlash

TM cards (CF cards), personal computers, peripheral devices, or use of non-Canon CF cards.

Trademark Acknowledgments

• Canon and PowerShot are trademarks of Canon,

Inc.

• CompactFlash is a trademark of SanDisk

Corporation.

• iBook and iMac are trademarks of Apple

Computer, Inc.

• Macintosh, PowerBook, Power Macintosh and

QuickTime are trademarks of Apple Computer,

Inc, registered in the United States and other countries.

• Microsoft, Windows, and Windows NT are either registered trademarks or trademarks of Microsoft

Corporation in the United States and/or other countries.

• Other names and products not mentioned above may be registered trademarks or trademarks of their respective companies.

Copyright © 2004 Canon Inc. All rights reserved.

3

Table of Contents

Functions and operations tables. These pages are shaded on the right edges to make them easy to find.

Read This First 7

Please Read ...........................................................7

Safety Precautions .................................................8

Preventing Malfunctions .......................................13

Components Guide 14

Preparing the Camera 17

Installing the Batteries ..........................................17

Installing a CF Card..............................................20

Setting the Date/Time...........................................22

Setting the Language ...........................................24

Basic Functions 25

Turning the Power On/Off.....................................25

Switching between Shooting and Playback..........26

Using the LCD Monitor .........................................28

Shooting – The Basics 33

Auto Mode ...................................................33

Reviewing an Image Right after Shooting ............36

Using the Mode Dial (Image Zone).......................38

Portrait ...............................................................38

Landscape ........................................................38

Night Scene .......................................................38

4

Fast Shutter .......................................................38

Slow Shutter......................................................38

Changing the Resolution and Compression......... 40

Using the Flash................................................ 42

Macro Mode ................................................... 44

Self-timer .............................................................. 45

Digital Zoom ......................................................... 46

Continuous Shooting ............................................ 47

Shooting Panoramic Images (Stitch Assist) ..... 48

Special Scene Mode..................................... 51

Postcard Print Mode ...................................... 53

Movie Mode ................................................... 55

Playback – The Basics 57

Displaying Images Individually

(Single Image Playback) ...................................... 57

Magnifying Images......................................... 58

Viewing Images in Sets of Nine (Index Playback) . 58

Jumping Between Images .................................... 59

Viewing/Editing Movies ........................................ 60

Erasing 63

Erasing Images Individually.................................. 63

Erasing All Images ............................................... 63

Shooting – Advanced Functions 64

Selecting Menus and Settings.............................. 64

Menu Settings and Default Settings .....................67

Resetting the Settings to Default ..........................73

Using the Mode Dial (Creative Zone) ...................74

P Program

Tv Setting the Shutter Speed ................................75

Av Setting the Aperture .........................................76

M Manually Setting the Shutter Speed and Aperture...77

Switching between Autofocus Modes...................78

Switching between Light Metering Modes ............79

Adjusting the Exposure.........................................80

Adjusting the Tone (White Balance) .....................81

Changing the ISO Speed......................................84

Changing the Photo Effect....................................85

Adjusting the Flash Output ...................................86

Shooting Problem Subjects for the Autofocus ......87

Setting the Auto Rotate Function..........................89

Playback – Advanced Features 91

Rotating Images in the Display.............................91

Attaching Sound Memos to Image .......................92

Auto Play ..............................................................93

Protecting Images.................................................94

Various Functions 96

About Printing .......................................................96

DPOF Print Settings .............................................98

Image Transfer Settings (DPOF Transfer Order) .......102

Downloading Images to a Computer .................. 104

Computer System Requirements ....................... 104

Viewing Images on a TV Set .............................. 112

Resetting the File Number.................................. 114

Customizing the Camera (My Camera Settings).... 115

Registering My Camera Settings........................ 116

List of Messages 120

Troubleshooting 122

Appendix 128

Using the Power Kits (Sold Separately) ............. 128

Using the Lenses (Sold Separately)................... 131

Camera Care and Maintenance ......................... 134

Specifications 136

Battery Performance .......................................... 140

CF Cards and Estimated Capacities

(Recordable Images).......................................... 140

Photo Tips and Information 144

Index 146

Functions Available in Each Shooting Mode ...... 151

5

Symbols Used

Icons under title bars show the operations mode.

As in the example below, the mode dial should be set to , , , , , , , , , , or .

Using the Flash

Mode Dial

This mark denotes issues that may affect the camera's operation.

This mark denotes additional topics that complement the basic operating procedures.

6

Read This First

Please Read

Test Shots

Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated correctly. Please note that Canon, its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including CompactFlash

TM

cards, that results in the failure of an image to be recorded or to be recorded in a format that is machine readable.

Warning Against Copyright Infringement

Please note that Canon digital cameras are intended for personal use and should never be used in a manner that infringes upon or contravenes international or domestic copyright laws and regulations.

Please be advised that in certain cases the copying of images from performances, exhibitions, or commercial properties by means of a camera or other device may contravene copyright or other legal rights even if the image was shot for personal use.

Warranty Limitations

This camera's warranty is only effective in the country of sale. If a problem arises while the camera is in use abroad, please convey it back to the country of sale before proceeding with a warranty claim to a

Canon Customer Support Help Desk.

For Canon Customer Support contacts, please see the Canon Limited Warranty supplied with your camera.

7

Read This First

Safety Precautions

z Before using the camera, please ensure that you have read and understood the safety precautions described below. Always ensure that the camera is operated correctly.

z The safety precautions noted on the following pages are intended to instruct you in the safe and correct operation of the camera and its accessories to prevent injuries or damage to yourself, other persons and equipment.

z In the next few pages, the term “equipment” refers primarily to the camera, batteries, and separately sold battery and charger kit and compact power adapter.

8

Read This First

WARNINGS

z Do not aim the camera directly into the sun or at other intense light sources which could damage your eyesight.

z Do not trigger the flash in close proximity to human or animal eyes. Exposure to the intense light produced by the flash may damage eyesight. In particular, remain at least one meter (39 inches) away from infants when using the flash.

z Store this equipment out of the reach of children and infants. Accidental damage to the camera or batteries by a child could result in serious injury. In addition, placement of the strap around a child's neck could result in asphyxiation.

z Do not attempt to disassemble or alter any part of the equipment that is not expressly described

in this guide. Disassembly or alteration may result in high-voltage electrical shock. Internal inspections, alterations and repairs should be conducted by qualified service personnel authorized by your camera distributor or a Canon Customer Support Help Desk.

z To avoid the risk of high-voltage electrical shock, do not touch the flash portion of the camera if it

has been damaged. Similarly, never touch internal portions of the equipment that become exposed as a result of damage. There is a risk of high-voltage electrical shock. Please take the first opportunity to consult your camera distributor or a Canon Customer Support Help Desk.

z Stop operating the equipment immediately if it emits smoke or noxious fumes. Failure to do so may result in fire or electrical shock. Immediately turn the camera’s power off, remove the camera batteries or unplug the power cord from the power outlet. Confirm that smoke or fume emissions have ceased. Please consult your camera distributor or the closest Canon Customer Support Help Desk.

9

Read This First z Stop operating the equipment if it is dropped or the casing is damaged. Failure to do so may result in fire or electrical shock. Immediately turn the camera’s power off, remove the camera batteries or unplug the power cord from the power outlet. Please consult your camera distributor or the closest

Canon Customer Support Help Desk.

z Do not allow the equipment to come into contact with, or become immersed in, water or other

liquids. Do not allow liquids to enter the interior. The camera has not been waterproofed. If the exterior comes into contact with liquids or salt air, wipe it dry with a soft, absorbent cloth. In the event that water or other foreign substances enter the interior, immediately turn the camera's power off and remove the camera batteries or unplug the power cord from the power outlet. Continued use of the equipment may result in fire or electrical shock. Please consult your camera distributor or the closest Canon Customer

Support Help Desk.

z Do not use substances containing alcohol, benzene, thinners or other flammable substances to

clean or maintain the equipment. The use of these substances may lead to fire.

z Remove the power cord on a regular periodic basis and wipe away the dust and dirt that collects

on the plug, the exterior of the power outlet and the surrounding area. In dusty, humid or greasy environments, the dust that collects around the plug over long periods of time may become saturated with humidity and short-circuit, leading to fire.

z Do not cut, damage, alter or place heavy items on the power adapter cord. Any of these actions may cause an electrical short circuit, which may lead to fire or electrical shock.

z Do not handle the power cord if your hands are wet. Handling it with wet hands may lead to electrical shock. When unplugging the cord, ensure that you hold the solid portion of the plug. Pulling on the flexible portion of the cord may damage or expose the wire and insulation, creating the potential for fires or electrical shocks.

z Use of power sources not expressly recommended for this equipment may lead to overheating,

distortion of the equipment, fire, electrical shock or other hazards. Use only the recommended power accessories.

10

Read This First z Do not place the batteries near a heat source or expose them to direct flame or heat. Neither

should you immerse them in water. Such exposure may damage the batteries and lead to the leakage of corrosive liquids, fire, electrical shock, explosion or serious injury.

z Do not attempt to disassemble, alter or apply heat to the batteries. There is serious risk of injury due to an explosion. Immediately flush with water any area of the body, including the eyes and mouth, skin, or clothing that comes into contact with the inner contents of a battery.

z Avoid dropping or subjecting the batteries to severe impacts that could damage the casings. It could lead to leakage and injury.

z Do not short-circuit the battery terminals with metallic objects, such as key holders. It could lead to overheating, burns and other injuries.

z Before you discard a battery, cover the terminals with tape or other insulators to prevent direct

contact with other objects. Contact with the metallic components of other materials in waste containers may lead to fire or explosions. Discard the batteries in specialized waste facilities if available in your area.

z Use only recommended batteries and accessories. Use of batteries not expressly recommended for this equipment may cause explosions or leaks, resulting in fire, injury and damage to the surroundings. z If using AA-size NiMH batteries, use only Canon AA-size NiMH batteries and the charger

recommended for use with these batteries. Use of another charger may cause batteries to overheat or deform, posing risk of fire or electric shock. z Disconnect the battery charger or compact power adapter from both the camera and power outlet after recharging and when the camera is not in use to avoid fires and other hazards.

z The camera terminal of the battery charger cord and the compact power cord is designed for

exclusive use with your camera. Do not use it with other products or batteries. There is a risk of fire and other hazards. z Exercise due caution when screwing on the separately sold wide converter, tele-converter, close-up

lens and conversion lens adapter. If they loosen, fall off and shatter, the glass shards may cause an injury.

11

Read This First

CAUTIONS

z Avoid using, placing or storing the equipment in places subject to strong sunlight or high

temperatures, such as the dashboard or trunk (boot) of a car. Exposure to intense sunlight and heat may cause the batteries to leak, overheat or explode, resulting in fire, burns or other injuries. High temperatures may also cause deformation of the casing. Ensure that there is good ventilation when using the battery charger to charge the battery pack or power the camera.

z Do not store the equipment in humid or dusty areas. Storage in such areas could lead to fire, electrical shock or other damage.

z Be careful not to bang the camera or subject it to strong impacts or shocks that could lead to injury or damage the equipment when wearing or holding it by the strap.

z Be careful not to cover the flash with your fingers or clothing when shooting. The flash may be damaged and emit smoke or noise. In addition, do not touch the surface of the flash after taking several pictures in rapid succession. Either action could result in burns.

z Do not operate the flash with dirt, dust or other items stuck to its lens. The resulting heat build-up could damage the flash.

z Ensure that the battery charger or compact power adapter is plugged into a power outlet of the

specified rating, not over the specified rating. The plug of the battery charger varies according to region.

z Do not use the battery charger or compact power adapter if the cable or plug is damaged, or if the plug is not fully inserted into the power outlet.

z Do not allow metal objects (such as pins or keys) or dirt to contact the charger terminals or plug. z If your camera is used for prolonged periods, the camera body may become warm. Please take care when operating the camera for an extended period as your hands may experience a burning sensation.

12

Read This First

Preventing Malfunctions

Avoid Strong Magnetic Fields

Never place the camera in close proximity to electric motors or other equipment generating strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data.

Avoid Condensation Related Problems

Moving the equipment rapidly between hot and cold temperatures may cause condensation (water droplets) to form on its external and internal surfaces. You can avoid this by placing the equipment in an airtight, resealable plastic bag and letting it adjust to temperature changes slowly before removing it from the bag.

If Condensation Forms Inside the Camera

Stop using the camera immediately if you detect condensation.

Continued use may damage the equipment. Remove the CF card and battery or power cord (if connected) from the camera and wait until the moisture evaporates completely before resuming use.

Extended Storage

When not using the camera for extended periods of time, remove the batteries from the camera or battery charger and store the equipment in a safe place. Storing the camera for extended periods with batteries installed may cause battery leaks, which can damage the camera.

However, the date, time and other camera settings may reset to default settings if the batteries have been removed for more than three weeks.

13

Components Guide

Shutter Button (p. 34)

Speaker

Shooting Mode Dial (p. 38)

ON/OFF Button (p. 25)

Power Indicator (p. 16)

Viewfinder Window (p. 35)

AF-assist Beam (p. 36)

Red-eye Reduction Lamp (p. 43)

Self-timer Lamp

Flash (p. 42)

A/V (Audio/Video) Out

Terminal (p. 112)

Ring Release Button

Zoom Lever

(p. 33, 46, 58, 59)

Lens

Microphone Ring

Terminal

Cover

DIGITAL Terminal (p. 107)

To connect the camera to a computer or printer, use one of the following cables.

Computer: Interface Cable IFC-400PCU (supplied with the camera)

Direct Print Compatible Printers (Sold Separately)

• CP Printers: Interface Cable IFC-400PCU (supplied with the camera) or the Direct Interface Cable DIF-100 (supplied with the CP-100/CP-10)

• Bubble Jet Printers:

- Bubble Jet Direct Compatible Printers: Please refer to your Bubble Jet printer user guide.

- PictBridge Compliant Printers: Interface Cable IFC-400PCU (supplied with the camera)

PictBridge Compliant Non-Canon Printers: Interface Cable IFC-400PCU (supplied with the camera)

Please refer to the System Map or the Direct Print User Guide supplied with the camera for direct print compatible printer information.

14

Components Guide

LCD Monitor**

(p. 28)

Indicators (p. 16)

MENU Button

(p. 65)

Strap Mount

Mode Switch

(p. 26)

Viewfinder

Attaching the wrist strap*

CF Card Slot Cover (p. 20)

Omni Selector ( / , (Macro)/ MF / , , )

SET Button

FUNC. (Function)/

(Single Image Erase) Button (p. 63, 64)

Battery Cover Lock (p. 17)

DC IN

Terminal (p. 131)

Tripod Socket

DISP. (Display) Button (p. 28)

(Print/Share) Button (p. 109)

The following operations are accessible through one easy press of the

Printing: See the Direct Print User Guide (separate from this guide)

(Print/Share) button.

Downloading images (Windows only): See page 104 of this guide and the Software Starter Guide (separate from this guide)

Blue: Ready to print/Ready to transfer images

Blinking Blue: Printing/Transferring

* Be careful not to wave the camera about or catch it on other items when dangling it from the wrist strap.

** The LCD monitor is covered with a thin plastic sheet for protection against scratches during shipment. Remove it before using the camera.

15

Components Guide

Shooting Mode Dial

Creative Zone

Use the shooting mode dial to select a Shooting mode.

Auto : Auto (p. 33)

The camera automatically selects settings.

Image Zone

• Image Zone

The camera automatically selects settings according to the image composition type.

: Portrait (p. 38) : Landscape (p. 38)

: Night Scene (p. 38)

: Slow Shutter (p. 38)

: Fast Shutter (p. 38)

: Stitch Assist (p. 38, 48)

: Special Scene (p. 38, 51) : Movie (p. 55)

• Creative Zone

The user selects exposure, aperture or other settings to achieve special effects.

: Program AE (p. 75)

: Shutter Speed-priority AE (p. 75)

: Aperture-priority AE (p. 76)

: Manual Exposure (p. 77)

Indicators

The indicators light or blink when the ON/OFF button or the shutter button is pressed.

• Indicator Next to the Viewfinder

(Upper Indicator)

Green: Ready to record/Ready to communicate

(during a computer connection)

Blinking Green: Starting up/Recording to CF card/

Reading CF card/Erasing from CF card/

Transmitting data (during a computer connection)

Orange: Ready to record (flash on)

Blinking Orange: Ready to record (camera shake warning)/Flash is charging (when LCD monitor is on)

• Indicator Next to the Viewfinder

(Lower Indicator)

Yellow: Macro mode/Manual Focus mode/AF Lock mode

Blinking Yellow: Focusing difficulty (although you can press the shutter button, try using focus lock or adjusting the focus manually (p. 89))

• Power Indicator

Green: Power is on

16

Preparing the Camera

Installing the Batteries

The camera uses four AA-size alkaline batteries supplied with the camera. You may also use separately sold nickel metal hydride

(NiMH) batteries.

1

Be sure that the camera power is off.

2

Slide the battery cover lock in the direction of the arrow, and open the cover.

3

Insert the batteries as shown.

Positive end (+)

Negative end (-)

4

Close the battery cover.

When the indicator next to the viewfinder blinks green, do not turn off the power or open the battery cover. The camera is writing, reading, erasing or transmitting an image to or from the CF card.

z We recommend the use of the separately sold AC Adapter Kit ACK600 to power the camera during long usage sessions (p. 130).

z The separately sold battery charger kit lets you use rechargeable NiMH batteries to power the camera (p. 128).

17

Preparing the Camera z For important information, see Battery

Performance (p. 140).

z For information about the Battery and

Charger Kit and AA-size rechargeable

NiMH batteries, see the System Map

(separate from this guide).

Proper Battery Handling

zUse AA-size alkaline or Canon AA-size NiMH batteries (sold separately) only. For information on AA-size NiMH battery handling, see Using

Rechargeable Batteries (p. 128).

zNever use manganese or lithium batteries, as these battery types may overheat in the camera.

zSince the performance of alkaline batteries may differ according to brand, the operating time of the batteries you purchase may not be as long as the batteries that came with the camera. zCamera operating time may shorten at low temperatures when alkaline batteries are used.

Also due to their specifications, alkaline batteries may expire faster than NiMH batteries. If you are using the camera in cold areas or for a long time, we recommend using Canon AA-size NiMH

Battery Kit NB4-200 (a four piece set).

18 zWhile it is possible to use AA-size nickel-cadmium batteries, performance is unreliable and their use is not recommended. zNever mix unused and partially used batteries. Always load four fresh (or fully recharged) batteries at the same time.

zBe careful to load the batteries with their positive (+) and negative (-) ends in the right direction.

zNever mix batteries of different types or from different manufacturers. All four batteries should be identical.

zBefore inserting the batteries, wipe the battery terminals well with a dry cloth. Oil from one’s skin or other dirt may cause a considerable reduction in the number of recordable images or reduced usage time.

zBattery performance deteriorates at low temperatures (especially with alkaline batteries).

If you are using the camera in cold areas and batteries are running down faster than they should, you may be able to restore performance by placing batteries in an inner pocket to warm them up prior to use. But be careful that you don’t put the batteries into a pocket together with a metal key chain or other metallic objects, as these objects may cause batteries to short-circuit.

zIf you do not plan to use the camera for a long time, remove the batteries from the camera and store them in a safe place. Batteries may leak and damage the camera if left installed during prolonged periods of non-use. However, the date, time and other camera settings may reset to default settings if the batteries have been removed for more than three weeks.

Preparing the Camera

The positive electrode (plus terminal) is flat.

The negative terminal is correctly formed (protruding from the metal base), but the seal does not extend up over the edge of the metal base.

WARNING

Never use damaged batteries or batteries whose outer seal is completely or partially missing or peeled off, as there is risk that such batteries may leak, overheat, or burst.

Always check the seals on store-bought batteries before loading them, as some batteries may come with defective seals. Do not use batteries with defective seals.

Never use batteries that look like this.

Batteries with all or part of the seal

(electrical insulation sheath) peeled off.

Battery Status Indications

The LCD monitor displays an icon or message to let you know when batteries are low or depleted.

Batteries are beginning to run low.

Replace (or recharge) batteries promptly. Replace or recharge the batteries if you wish to continue using the camera. If the LCD monitor is off, this icon will appear when you press any of the following buttons: DISP.

,

or / MF.

Change the batteries

Batteries are fully depleted and the camera can no longer operate. You should replace the batteries immediately.

19

Preparing the Camera

Installing a CF Card

1

Be sure that the camera is turned off.

2

Slide the CF card slot cover in the direction of the arrow, and open it.

3

Insert the CF card with the label facing out.

z Insert the CF card all the way into the slot, so that the CF card eject button pops all the way out.

mark

CF card eject button

Card label z To remove the CF card, press the CF card eject button.

4

Close the CF card slot cover securely.

z When the indicator next to the viewfinder blinks green, the camera is writing, reading, erasing or transmitting an image to or from the CF card. Do not perform the following, for image data may be lost or corrupted:

- Do not shake the camera.

- Do not turn off the power or open the

CF card slot cover.

z Be aware that use of CF cards whose contents have been edited at another camera or with another company’s software may cause the camera to operate incorrectly.

z You are recommended to use CF cards that have been formatted in your camera

(see next page). The card supplied with the camera may be used without further formatting.

For more information on CF cards, see CF

Cards and Estimated Capacities

(Recordable Images) (p. 140).

20

Preparing the Camera

About CF Cards

zCF cards are high-precision electronic devices.

Do not bend them, apply force to them, or subject them to shocks or vibration.

zDo not attempt to disassemble or alter a CF card.

zMoving a CF card rapidly between temperature extremes will cause condensation to form in the card and lead to a malfunction. To avoid condensation, place the CF card in a sealed plastic bag before moving it into a different temperature zone and allow it to adjust slowly to the new temperature. If condensation forms on the CF card, store it at room temperature until the water droplets have evaporated naturally.

zPlace the CF card in the supplied case for storage.

zDo not use or store CF cards in the following types of location.

• Locations subject to dust or sand

• Locations subject to high humidity and high temperatures

Formatting a CF Card

You should always format a new CF card or one from which you wish to erase all images and other data.

Please note that formatting a CF card erases all data, including protected images and other file types. Please check the contents of the CF card before formatting it.

1

Turn the power on (p. 25).

2

Press the MENU button and select

[ (Set up)] using

or .

3

Select (Format) press the SET button.

21

Preparing the Camera

4

Select [OK] using

or and press the SET button. z To cancel formatting instead, select [Cancel] and press the SET button.

z The capacity of the CF card displayed after formatting will be less than the rated capacity of the CF card. This is not a malfunction of the CF card or camera.

5

Press the MENU button. z If the camera does not work properly, the inserted CF card may be malfunctioning. Reformatting the CF card may solve the problem.

z When a non-Canon brand CF card is malfunctioning, reformatting it may solve the problem.

z CF cards formatted in another camera, computer or peripheral device may not operate correctly. When that happens, reformat the CF card with this camera.

22

Setting the Date/Time

The Set Date/Time menu will appear when the camera is first turned on or the date battery has run down. Start from Step 4 to set the date and time.

1

Turn on the camera (p. 25).

2

Press the MENU button and select the [ (Set up)] menu using or

.

3

Press select (Date/

Time), and then press the SET button.

4

Set the date and time.

z Press or to highlight another field.

z Press or to change the value of the highlighted field.

z The date can be set up to the year 2030.

5

Press the SET button.

6

Press the MENU button.

z The date, time and other camera settings may reset to the default settings if the batteries have been removed for more than three weeks. If this happens, reset these settings.

z For embedding the date on the image data, refer to page 54. z For printing images with the date on them, refer to page 100 or refer to the

Direct Printer User Guide (separate from this guide) or the Software Starter Guide

(separate from this guide).

Preparing the Camera

Charging the date/time battery z The camera has a built-in rechargeable lithium battery for saving settings such as the date and time. This battery is recharged by the AA-size batteries while it is in the camera. Right after purchasing the camera, leave fully charged batteries in the camera, or plug in the AC Adapter Kit ACK600 (sold separately), for about 4 hours to charge the date/time battery. It will charge even when the camera power is turned off.

z If the Date/Time menu appears when the camera power is turned on, the date/ time battery charge is low. Use the above method to recharge it.

23

Preparing the Camera

Setting the Language

Use this feature to select the language for the

LCD monitor display.

1

Turn on the camera (p. 25).

2

Press the MENU button and select the [ (Set up)] menu using or

.

4

Select a language

and press the

SET button.

z If you press the SET button without pressing the MENU button, the camera reverts to the

Set up menu without setting the language.

5

Press the MENU button.

3

Select using or and press the SET button.

Easy Operation

In Playback mode, you can display the language setting menu immediately by pressing the MENU button while holding the SET button (this operation is not available during movie playback or during a connection to a separately sold printer).

24

Basic Functions

Turning the Power On/Off

1

Press the ON/OFF button until the power indicator lights green (p. 16).

Shooting Mode

z Current shooting settings will appear in the

LCD monitor for about 6 seconds.

If you turn the mode switch to , the lens will retract after approximately 1 minute.

Playback Mode

z The LCD monitor displays an image.

Turning the Camera Off

z Press the ON/OFF button again to turn the power off.

z You will hear a start-up sound and see the start-up image when the power comes on. (To change the start-up sound and image, see below and pages

72 and 115.) z The start-up image does not appear when the LCD monitor is off in Shooting mode or the A/V OUT terminal is connected to a TV.

Turning on the camera without the startup sound and image

Press and hold the SET button, then turn on the power.

Power Saving Function

This camera is equipped with a power saving function. Depending on the power saving setting, the camera may power down or the LCD monitor may go off automatically.

zAuto Power Down

[On]:

Shooting mode:

Powers down approximately 3 minutes after the last time a camera control is accessed.

Playback mode:

Powers down approximately 5 minutes after the last time a camera control is accessed.

Printer connection mode:

Powers down approximately 5 minutes after the last time a camera control is accessed or something is printed on the printer.

25

Basic Functions

When the Auto Power Down Function Activates

Press the ON button again.

[Off]:

The power saving function does not activate.

zDisplay Off

The LCD monitor automatically shuts off approximately 1 minute* after the last time a camera control is accessed.

* This time can be changed (p. 70).

When the Display Off Function Activates

The LCD monitor display turns back on if any button other than the ON/OFF button is pressed. z The power saving function will not activate while the camera is in Auto Play mode or during a computer connection

(p. 93, 104).

z You can turn off the power saving function in the [ (Set up)] menu (p. 70).

Switching between Shooting and

Playback

You can quickly switch between Shooting mode and Playback mode. This is convenient when you wish to shoot again after checking or erasing an image immediately after it is shot.

Shooting Mode

Playback Mode

The lens does not retract for

1 minute after the camera switches to Playback mode.

Shooting Mode z Slide the mode switch to .

Playback Mode z Slide the mode switch to

.

When a printer (sold separately) is connected, images can be printed (see the

Direct Print User Guide).

When the camera is connected to a computer, recorded images can be downloaded to and viewed with a computer

(p. 104).

26

z When a printer (sold separately) is properly connected, , , or appears on the LCD monitor.

z When a computer is properly connected, the LCD monitor turns off.

Basic Functions

27

Basic Functions

Using the LCD Monitor

The LCD monitor can be used to compose images while shooting, adjust settings menus and play back images. Pressing the DISP. button cycles the LCD monitor to the next mode each time the button is pressed.

Shooting Mode

LCD Monitor Display

(No Information)

DISP. Button

LCD Monitor Display

(Information View)

AF Frame

Spot AE

Point Frame

DISP. Button Shutter Speed

Aperture Value

Shots Remaining or

Remaining Movie Time/

Elapsed Time (During Shooting)

(frames/sec.)

Off

DISP. Button

The AF frame changes according to its On/Off setting (LCD monitor On).

AiAF set to [On] (p. 78) AiAF set to [Off] (p. 78) z Green: Focusing complete (focused AF frame) z Green: Focusing complete z Does not appear: Focusing difficulty z Yellow: Focusing difficulty

28

Basic Functions

Shooting Mode p. 38, 74

Exposure Compensation p. 80

White Balance

Drive Mode p. 81 p. 45, 47

ISO Speed

Photo Effect

Light Metering Mode

Compression p. 84 p. 85 p. 79 p. 40

Resolution

Postcard Print p. 40 p. 53

Flash

Red-eye Reduction

Macro Mode

Manual Focus p. 42 p. 43 p. 44 p. 89

Auto Rotate Function p. 91

Movie Recording Mode p. 55

Digital Zoom Setting*

2 p. 46

Camera Shake Warning p. 16

Low Battery p. 19

*1 : The icons of all the SCN mode options appear (p. 51).

*2 : Zoom powers reflect the combined optical and digital zoom effects. These figures appear when the digital zoom is activated.

zWhen a Shooting mode setting is changed, the settings appear on the LCD monitor for about 6 seconds even if the LCD monitor is set to No information or off. (The Shooting mode settings may not appear depending on the camera setting.) You can set the flash, Macro mode, and the manual focus settings while this information appears on the LCD monitor.

z and the icons in the above appear even when the information view is turned off.

zIn addition to the above, the AF frame, spot light metering frame, shutter speed, aperture value, recordable images or recordable movie time are displayed as in the example to the left.

zSetting the mode dial to or modes turns the LCD monitor on regardless of whether it is set to on or off.

zA slow shutter speed has likely been selected because of insufficient lighting if the upper indicator beside the viewfinder blinks orange after the metering preparations are complete and the camera shake icon ( ) displays in the LCD monitor. Set the flash to or , or affix the camera to a tripod to shoot.

zAfter you take a photo by fully pressing the shutter button, the image displays on the LCD monitor for approximately two seconds (or the review duration you set from 2 to 10 seconds). If you press the SET button while the image is displayed, it will continue to display (p. 36).

29

Basic Functions

Playback Mode

DISP. Button

No Display

Standard Display

File Number

DISP. Button

Image Number and Total

(Display Image/Total)

Shooting

Date/Time

Aperture Value

Shutter Speed

Detailed Display*

Histogram

DISP. Button

Movie Length

Compression p. 40

Resolution (Still image) p. 40

Sound memo (WAVE file) p. 92

Movie

Protection Status p. 55 p. 94

* Detailed Display is not available in index playback (9 images).

30

Basic Functions

Shooting Mode p. 38, 74

Exposure Compensation p. 80

White Balance p. 81

Photo Effects

ISO Speed p. 85 p. 84

Flash

Macro Mode

Manual Focus

Light Metering Mode

Resolution (Movies) p. 42 p. 44 p. 89 p. 79 p. 40

Low Battery p. 19

In addition to the above, the shutter speed, aperture setting, histogram and recorded movie time are displayed as in the example in the figure on the left.

* Each mode of the SCN mode appears (p. 51).

The following information may also appear with some image files.

An audio file other than a wave file, or a file with an unrecognized format, is attached.

A JPEG file not supported by “Design rule for Camera File system” (DCF) standards.

RAW format file

A file with an unrecognized format.

The image in the LCD monitor may darken when the monitor is used under sunlight or other strong lighting. This is not a defect.

z The on/off setting of the LCD monitor display mode is memorized when the camera is turned off. When the camera is turned on again it assumes the last mode. However, when the LCD monitor is turned on and the “Change the Batteries” message appears, the LCD monitor may not automatically turn on the next time the camera is started.

31

Basic Functions z While a recorded image is displayed on the LCD monitor, you can check the exposure with the graph (see About the

Histogram (below)) that shows the distribution of the brightness data. If the exposure requires adjustment, set the exposure compensation and re-shoot.

(Press the DISP. button if the histogram and other information is not shown.) z Please note that image information recorded by this camera may not display correctly on other cameras and image information recorded by other cameras may not display correctly on this camera.

About the Histogram z The histogram is a graph that allows you to judge the brightness of the shot image. The greater the bias toward the left in the graph, the darker the image.

The greater the bias toward to the right, the brighter the image. If the image is too dark, adjust the exposure compensation to a positive value.

Similarly, adjust the exposure

32 compensation to a negative value if the image is too bright (p. 80).

Sample Histograms

Dark image Balanced image Bright image

Shooting – The Basics

See Functions Available in Each Shooting

Mode (p. 151) at the end of this manual to find out which settings can be changed in which

Shooting modes.

Auto Mode

Mode Dial

In this mode, all you have to do is press the shutter button and let the camera do everything else.

1

Check that the camera is in

Shooting mode (p. 26).

2

Turn the Shooting mode dial to

.

3

Aim the camera at the subject you wish to shoot.

4

Use the zoom lever to achieve the desired composition (relative subject size in the viewfinder).

: Decreases the size of the subject (Wide angle)

: Magnifies the size of subject (Telephoto) z The angle of view can be adjusted within the

35 to 105 mm range, in 35mm film equivalent.

z When the LCD monitor is on, the combined use of the digital zoom and optical zoom enables magnified shooting up to approx. 10x

(See Digital Zoom, p. 46).

33

Shooting – The Basics

5

Press the shutter button halfway.

z The shutter button has a two-stage action.

Pressing Halfway

Pressing halfway automatically sets the exposure and focus.

• Two beeps will sound when the camera has finished metering, and the indicator next to the viewfinder will light green or orange. If the LCD monitor is on, the AF frame will appear green.

• The indicator next to the viewfinder will blink yellow and the beep will sound one time if the subject is difficult to focus on.

6

Press the shutter button all the way.

Pressing Fully

Pressing fully releases the shutter.

34

• You will hear the shutter sound when the shot is complete. Do not move the camera until you hear this sound.

• The indicator next to the viewfinder blinks green while data is recorded onto the CF card.

• The picture appears for two seconds on the

LCD monitor, if it is on.

z See page 151 for settings that can be changed in this mode.

z With the Review function, you can change the length of time images show on the LCD monitor after shooting, or set it so they do not show at all (p. 36). z If the orange or yellow indicator blinks while you press halfway, you can still press fully to take the shot. z Images are first saved into the camera’s internal memory before being recorded onto the CF card, allowing the next images to be taken immediately as long as sufficient space is available in the internal memory.

z The beep and shutter sound can be set

On/Off in the Set up menu (p. 69).

z When the shutter sound is set to [ ,

, (On)] (p. 72) and [Mute] is set to

On, no sound will be heard.

z There is no shutter sound in movie mode.

z Shots cannot be taken while the flash is charging.

Shooting with the Viewfinder

You can save the power by turning the LCD monitor off (p. 28) and using the viewfinder to shoot.

1

Compose the image so that the subject appears in the center of the frame in the viewfinder

(autofocus range).

Shooting – The Basics

About the Autofocus Function

This camera employs AiAF technology

(artificial intelligence autofocus) which uses a broad metering field to calculate the focal distance with high precision. It delivers a crisp focus even when the photographic subject is slightly offcenter.

Image Seen in Viewfinder vs. Recorded

Image

Please note that the actual image may differ from the image seen in the optical viewfinder due to the physical separation between the viewfinder and lens. This is more noticeable the closer the subject is to the lens. In some cases, portions of images shot up close that appear in the viewfinder will not appear in the recorded image. Please use the

LCD monitor to shoot images up close

(p. 44).

Shows approximate center of the image

Viewfinder window

35

Shooting – The Basics

AF-assist Beam z The AF-assist beam will sometimes emit when the shutter button is pressed halfway to assist focusing in certain conditions, i.e. dark conditions.

z The AF-assist beam can be turned off

(p. 67).

For example, if animals are your subject, turn off the beam when shooting in the dark to avoid startling them.

However, please keep in mind the following facts.

• If the AF-assist beam is turned off, it may become more difficult for the camera to focus in dark conditions.

• The red-eye reduction lamp may emit when you press the shutter button halfway even if the AF-assist beam is turned off.

In order to prevent any lamp from emitting before the flash fires, set both the red-eye reduction function and the

AF-assist beam to [Off] in the Shooting menu.

Reviewing an Image Right after

Shooting

Mode Dial

After a photo is taken, the image displays on the LCD monitor for two seconds. In addition, the image will keep on displaying regardless of the review duration setting if one of the following operations is performed.

z Keeping the shutter button fully pressed z Pressing the SET button while the image is displayed

Press the shutter button halfway again to stop displaying it.

You can perform the following while images are displayed.

Erasing Images Individually (p. 63)

• Display the setting details of the image

(p. 30).

Magnifying Images (p. 58) (When pressing the SET button and displaying images)

36

Changing the Image Display Duration

The length of time images are displayed after a photo has been taken can be changed from

2 seconds to 10 seconds or turned off.

1

Press the MENU button.

z The [ (Rec.)] menu appears.

2

Select (Review) using or .

3

Select a duration using or and press the MENU button.

z With the [Off] option, the image will not automatically display.

z With the [2 sec.] to [10 sec.] options, the image will appear for the time selected.

z You can continue to display the image as long as the shutter button is held fully pressed regardless of the Review setting.

z Another picture can be taken even while the last is displayed.

Shooting – The Basics

37

Shooting – The Basics

Using the Mode Dial (Image Zone)

Settings fitting the shooting conditions of your subject can easily be set using the mode dial.

Portrait Movie

Use this mode to shoot movie clips. Shooting and sound recording starts simultaneously (p. 55).

Stitch Assist Special Scene

Use this mode when you want the subject to appear sharp and the background to blur.

Use this mode when taking shots that you want to combine into a panorama

(p. 48).

Select from 6 scene modes to shoot with the most appropriate settings for the scene (p. 51).

Landscape Night Scene Fast Shutter Slow Shutter

38

Use this mode to shoot spacious landscape scenes.

Use this mode to capture human subjects against the backdrop of an evening sky or night scene.

The subject is illuminated with light from the flash while the backdrop is captured at a slow shutter speed.

Use this mode to shoot fast moving objects.

Use this mode to shoot moving objects to make them appear blurred, such as river rapids.

1

Turn the mode dial and set the icon of the function you wish to use to .

z Shooting procedures are the same as for the mode (p. 33).

and Shooting Modes

Always use a tripod to prevent camera shake.

z See page 151 for settings that can be changed in this mode.

z Tips for each function:

Portrait Mode

• To best achieve the effect of the background gradually fading, compose the image so that the upper half of the subject’s body fills most of the viewfinder or LCD monitor.

Shooting – The Basics

• The background gets increasingly indistinct the more you adjust the focal length toward telephoto.

Landscape Mode

• The icon (camera shake warning) may appear on the LCD monitor since slower shutter speeds are frequently used in this mode. If this happens, affix the camera to a tripod.

Night Scene Mode

• The shutter speed slows down. Even if you use the flash, tell your subjects not to move for a few moments.

• Using the mode in daylight will produce an effect similar to that of the

mode.

z Fast Shutter

• Noise in the recorded image may increase if you shoot dark subjects.

39

Shooting – The Basics

Changing the Resolution and

Compression

Mode Dial

*The Postcard Print mode is not available in

*

and .

*

You can change the resolution and compression

(excluding movies) settings to suit the purpose of the image you are about to shoot.

L

(Large)

M1

(Medium 1)

M2

(Medium 2)

S

(Small)

Resolution

2048 x

1536 pixels

1600 x

1200 pixels

1024 x

768 pixels

640 x 480 pixels

High

Low

Purpose z Print up to A4 size*

210 x 297 mm (8.3 x

11.7 in.) prints z Print up to letter size*

216 x 279 mm (8.5 x

11 in.) prints z Print postcard size

148 x 100 mm (6 x 4 in.) prints z Print L-size 119 x 89 mm (4.7 x 3.5 in.) prints z Print credit card size

86 x 54 mm (3.4 x 2.1 in.) prints z Send images as e-mail attachments z Shoot more images

* Paper sizes vary according to region.

40

Movies can be shot with the following resolutions.

Resolution

640 x 480 pixels

320 x 240 pixels

160 x 120 pixels

1 or z The resolution is set to M1 (1600 x

1200) and the compression is set to

(Fine).

z See page 53 for Postcard Print mode information.

Compression

Superfine

Fine

Normal

Purpose

High

Quality

Shoot higher quality images

Shoot normal quality images

Normal

Shoot more images

Press the FUNC. button.

2

Select L

*

using

or .

* The current setting is displayed.

3

Select the resolution or compression you wish to set using

or .

Excluding

Number of recordable images

(Only displayed when the resolution, compression or file format is selected)

4

Press the SET button.

5

Select the compression you wish to set using

or .

Shooting – The Basics z You can shoot the image right after selecting settings by pressing the shutter button. This screen will appear again, once the image is shot.

6

Press the FUNC. button.

z Image File Size (Estimated) (p. 141) z CF Cards and Estimated Capacities

(Recordable Images) (p. 140)

41

Shooting – The Basics

Using the Flash

Mode Dial *

* In (Fireworks) mode, the flash is prohibited.

Use the flash according to the guidelines below.

Auto with red-eye reduction

The flash fires automatically as required by the lighting level, and the red-eye reduction lamp fires each time the main flash fires.

Auto

The flash fires automatically as required by the lighting level.

Flash on with red-eye reduction

The red-eye reduction lamp and the flash always fire.

Flash on The flash always fires.

Flash off The flash does not fire.

1

Press the button to switch between flash modes.

z The selected flash mode appears on the LCD monitor.

z You can switch between settings by pressing

When the red-eye reduction function is on

When the red-eye reduction function is off z This operation may not work in certain

Shooting modes (p. 151).

2

Shoot the image.

z The flash will fire if the indicator beside the viewfinder lights orange when the shutter button is pressed halfway. (Does not fire in .)

42

z Shooting procedures are the same as for the

mode (p. 33).

When shooting with a high ISO sensitivity and using the flash, there is more of a chance of overexposure the closer you are to the subject.

z When shooting in any mode other than

mode, the flash fires with automatic adjustments.

z The flash fires twice. A pre-flash will fire and will be followed by the main flash.

The pre-flash is used by the camera to obtain the subject’s exposure data so that the main flash can be set to the optimal intensity for the shot.

z In mode, the flash fires with the manually set adjustments.

z The fastest shutter speed for flash synchronization is 1/500 second. The camera automatically resets the shutter speed to 1/500 second if a faster speed is selected.

z In mode, the [Flash Output] option can be changed (p. 86).

Shooting – The Basics z Shots cannot be taken while the flash is charging.

z The flash may take up to approximately

10 seconds to charge in some cases.

Actual times will vary according to usage and the battery charge.

z The flash setting is saved when the camera is turned off in the , , and Shooting modes.

Setting the Red-eye Reduction

Function

The red-eye reduction lamp fires when the flash is used in dark areas. This reduces light reflecting back from the eyes and making them appear red.

1

In the [ (Rec.)] menu, set (Redeye) to [On].

z appears on the LCD monitor.

43

44

Shooting – The Basics z The red-eye reduction function cannot be set when the Special Scene mode

(p. 51) is set to (Fireworks).

z Red-Eye Reduction

When shooting with the red-eye reduction function, the subjects must look right at the red-eye reduction lamp for this mode to be effective. Try asking them to look directly at the lamp. Even better results can be obtained by shooting with the lens set to a wide angle, increasing the lighting in indoor settings or approaching closer to the subject.

Macro Mode

Mode Dial *

* Macro mode is not available in mode.

The image will be shot in macro mode when the distance between the lens and the subject is in the range of 5 to 46 cm (2.0 in. to 1.5 ft.) at wide angle end and 26 to 46 cm (10 in. to

1.5 ft.) at telephoto end.

Use to take close-up shots of flowers or small objects.

1

Press the DISP. button to turn the

LCD monitor on.

2

Press the button.

z The icon appears on the LCD monitor. z Pressing the button again cancels the macro mode.

3

Shoot the image.

z The indicator beside the viewfinder will light yellow when the shutter button is pressed halfway.

z Shooting procedures are the same as for the

Mode (p. 33).

z Always use the LCD monitor to compose images in macro mode. Shooting with the viewfinder is possible, though, part of the image may not appear in the final shot (p. 35).

z When the lens is zoomed out to the wide angle end, the recordable area is approx. 55 × 41 mm (2.2 in. × 1.6 in.)

*1

, and at telephoto end, it is 92 × 69 mm

(3.6 in. × 2.7 in.).

*2

When the zoom position is located between the telephoto end and the wide angle end, the distance between the front of the lens and the subject will be the same as the telephoto end.

z The exposure may not be optimal when the flash is used in macro mode.

*1

Closest focal distance.

*2

Maximum optical telephoto setting.

Shooting – The Basics

Self-timer

Mode Dial

1

Press the FUNC. button and select

* (Drive Mode)

* The current setting is displayed.

2

Select or using or and press the FUNC. button.

z When is selected, the shutter release will be delayed for 10 seconds, and when is selected, the shutter release will be delayed for 2 seconds, after you press the shutter button.

3

Shoot the image.

z When is selected, the self-timer lamp starts blinking when the shutter button is pressed all the way. The self-timer sounds and the blinking gets faster two seconds before the shutter activates.

45

46

Shooting – The Basics z When is selected, the self-timer lamp blinks fast from the beginning. The shutter activates in two seconds. z Shooting procedures are the same as for the

mode (p. 33).

You can change the self-timer sound by changing the setting in [Self-timer Sound] in the [ (My Camera)] menu (p. 72).

Digital Zoom

Mode Dial

Images can be zoomed with the combined optical and digital zoom functions as follows.

z 3.8x, 4.8x, 6.0x, 7.4x, and 10x

1

Press the DISP. button to turn the

LCD monitor on.

2

In the [ (Rec.)] menu, select

(Digital Zoom).

z See Selecting Menus

and Settings (p. 65).

3

Select [On] using or and press the MENU button.

4

Press the zoom lever toward .

z The lens will zoom to the maximum optical telephoto setting and stop. Release the lever

and press it toward again to further zoom the image digitally.

z Press the lever toward to zoom back out.

The combined magnifications of the optical zoom and digital zoom are displayed.

5

Shoot the image.

z Shooting procedures are the same as for the

mode (p. 33).

The digital zoom cannot be used when the

LCD monitor is off.

z Images become coarser the more they are digitally zoomed.

z Since camera shake may become a factor when using the digital zoom, the use of a tripod is recommended.

Shooting – The Basics

Continuous Shooting

Mode Dial

Continuous shooting is available when the shutter button is fully pressed.

1

Press the FUNC. button.

2

Select *

Mode) using or

.

* The current setting is displayed.

3

Select using or and press the FUNC. button.

4

Press the shutter button halfway to lock the focus.

47

Shooting – The Basics

5

Press the shutter button all the way to shoot.

z Shooting will stop when the shutter button is released.

z The continuous shooting speed is approx. 2.2 frames per second (Large/fine, LCD monitor off. These figures reflect Canon’s testing standard. The actual figures will vary according to the subject and shooting conditions.).

z The interval between frames may lengthen somewhat when the internal memory becomes full.

z The flash can be used, but the interval between images will lengthen to accommodate the flash recharge time.

Shooting Panoramic Images

(Stitch Assist)

Mode Dial

Use this mode when taking shots that you want to combine into a panorama. To create the panorama itself, you must stitch the images together using your computer.

To create the panorama with your computer, use the PhotoStitch software that came with your camera.

48

Shooting – The Basics

Framing a Subject

The PhotoStitch program detects the overlapping portions of adjoining images and merges them. When shooting, try to include a distinctive item (landmark) in the overlapping portions.

z Compose each frame so that it overlaps

30 to 50 % of the adjoining image. Try to keep the vertical misalignment to within

10 % of the image height.

z Do not include moving items in the overlap. z Do not try to stitch images that include both distant and close items. Objects may appear warped or doubled up. z Make the brightness in each image consistent. The final image will appear unnatural if the difference in brightness is too great.

z For good results, pan (swivel) the camera to take successive shots.

z To shoot close-ups, slide the camera over the subject, keeping it parallel as you move.

Shooting

1

Turn the Shooting mode dial to

.

z The LCD monitor will turn on.

2

Select the shooting sequence using or and press the

SET button.

z The shooting sequence is set.

49

Shooting – The Basics z You can also press the shutter button directly to shoot without pressing the SET button.

3

Shoot the first image.

z The exposure and white balance settings are set and locked with the first image.

4

Compose and shoot the second image so that it overlaps the first.

z Minor discrepancies in the overlap can be corrected with the software.

Sequence z An image can be retaken. Press or to return to that frame.

5

Use the same procedures to shoot the remaining frames.

z A maximum of 26 images can be recorded.

6

Press the SET button after the last shot.

z A custom white balance setting (p. 82) cannot be set in mode. To use a custom white balance setting, first set it in another Shooting mode.

z The settings in place for the first image are locked in and cannot be changed for subsequent shots.

z A TV cannot be used as the monitor for shooting in this mode.

See page 151 for settings that can be changed in this mode.

50

Special Scene Mode

Mode Dial

By simply selecting one of the following 6 modes, you can shoot the image with the most appropriate settings for the scene.

Foliage

Snow

Beach

Fireworks

Underwater

Indoor

Appropriate for shooting beautiful images with flowers, leaves or trees.

Appropriate for shooting scenes such as snowy mountains while preventing dark subjects and bluish backgrounds.

Appropriate for shooting scenes by the sea while preventing dark subjects and enhancing the blue of the sea.

Appropriate for shooting fireworks.

Appropriate for shooting images with the Waterproof Case

WP-DC30 (sold separately). This mode yields image data with less effects of minute sand, dirt or other particles underwater.

Prevents camera shake and maintains the subject's true color when shooting under fluorescent or tungsten lighting.

Shooting – The Basics

1

Turn the mode dial to (Special

Scene mode).

z The current Scene mode screen is displayed.

2

Select the scene you wish to shoot using or and shoot the image.

z The name of the Scene mode is displayed for six seconds each time you change the mode.

z Shooting procedures are the same as for the

mode (p. 33) excluding .

z For the shooting procedures of , see the

Waterproof Case User Guide included with the Waterproof Case WP-DC30 (sold separately).

51

Shooting – The Basics

Foliage

or

Indoor

or

Snow

or

Underwater z In mode, the shutter speed slows down. Use a tripod to avoid camera shake.

z In and modes, the ISO speed may increase and cause noise in the image.

z See page 151 for settings that can be changed in this mode. z Results may vary depending on the subject.

z When shooting images underwater, always turn the power off before inserting the camera into the waterproof case (sold separately).

or

Beach Fireworks

or

or

52

Postcard Print Mode

Mode Dial

You can shoot images with settings appropriate for postcard size printing.

* When printing standard image data to postcard size, sometimes the top, bottom and sides may not get printed. By shooting images in the

Postcard Print mode, you can check the printing area (vertical/horizontal ratio of 3:2) beforehand.

In addition, the resolution locks to M1 (1600 x

1200) and the compression locks to the (Fine) setting, rendering smaller file sizes.

1

Press the FUNC. button.

2

Select L*

or .

* The current setting is displayed.

3

Select using or .

Shooting – The Basics z You can shoot the image right after selecting settings by pressing the shutter button. The menu displays again after the shot, allowing you to change the settings easily.

4

Press the FUNC. button.

5

Shoot the image.

z When you press the shutter button halfway, the area that will not get printed grays out.

z Shooting procedures are the same as for the mode (p. 33).

Selecting cancels the [On] setting of the digital zoom.

z Some settings are not available with certain

Shooting modes. Please refer to Functions

Available in Each Shooting Mode (p. 151).

z When [Date Stamp] (p. 54) is set to [Date] or [Date & Time], appears on images in step 2 and 3.

z For printing instructions, refer to the

Direct Print User Guide.

53

Shooting – The Basics

Embedding the Date in the Image

Data

You can embed the date on image data when

is selected. The date will be printed on your images even if it has not been set at the computer or printer.

z Ensure that the camera’s date/time is set beforehand (p. 22).

1

Check that appears on the

LCD monitor.

2

Select

Stamp) in the [

(Rec.)] menu.

z See Selecting Menus

and Settings (p. 65).

3

Select [Off], [Date] or [Date & Time] using or .

z See Setting the Date/

Time (p. 22).

4

Press the MENU button.

5

Shoot the image.

z Shooting procedures are the same as for the

mode (p. 33).

When using a CP printer, part of the date may not get printed if the credit card size print (54 mm x 84 mm) is selected.

The Date Stamp cannot be deleted from the image data once it has been set.

54

Movie Mode

Mode Dial

Use this mode to shoot movie clips. The resolution can be set to either [ (640 × 480)],

[ (320 × 240)] or [ (160 × 120)] (p. 40)

1

Turn the Shooting mode dial to . z The LCD monitor turns on and displays the maximum recording time (in seconds).

2

Press the shutter button all the way.

z Shooting and sound recording starts simultaneously.

z During the shooting a red circle appears in the upper right of the LCD monitor.

3

Press the shutter button all the way to stop recording the movie.

z The maximum length of individual movie clips

(15 frames/second) is about 30 seconds* at the setting, 3 minutes at the setting and about 3 minutes* at the setting.

Shooting – The Basics

* Using the following CF cards:

- Supplied FC-32MH CF Card

- Separately sold Canon FC-256MH or FC-

512MSH CF card (not sold in some regions)

These times may vary with the subject and shooting conditions. Recording will automatically stop when the maximum is reached or when the CF cards runs out of free capacity.

z You are recommended to use a CF card that has been formatted in your camera to shoot movies (p. 21). The card supplied with the camera may be used without further formatting.

z The recording time may not display properly during shooting or filming may stop unexpectedly with the following types of CF cards.

- Slow recording cards

- Cards formatted on a different camera or a computer

- Cards which have had images recorded and erased repeatedly

Although recording time may not display properly during shooting, the movie will

55

Shooting – The Basics be recorded correctly on the CF card.

Recording time will display properly if you format the CF card in this camera

(excluding slow recording CF cards).

z Be careful not to touch the microphone while shooting.

z The AE, AF, white balance and zoom settings are set and locked to the settings of the first frame.

z The indicator on the left side of the viewfinder blinks green after a shot. You cannot shoot again until it stops blinking.

z See page 151 for settings that can be changed in this mode.

z Sound is recorded monaurally.

z There is no shutter sound in movie mode.

z QuickTime 3.0 or higher is required to playback movie files (AVI / Motion

JPEG) on a computer. (QuickTime (for

Windows) is bundled on the supplied

Digital Camera Solution Disk. On the

Macintosh platform, QuickTime 3.0 or later is generally bundled with Mac OS

8.5 or later operating system.)

56

Playback – The Basics

Displaying Images Individually

(Single Image Playback)

You can view the recorded images on the

LCD monitor.

1

Slide the mode switch to .

z The last recorded image appears (single image playback).

2

Move between images using or

.

z Use to move to the previous image and to move to the next. Holding or moves more rapidly between images, but the images will not appear as clearly.

You may not be able to play back images that have been shot with another camera or edited on a computer with other software applications.

z Press the DISP. button to show the data for the displayed image (p. 30).

z Press the button to quickly delete the displayed image (p. 63).

57

Playback – The Basics

Magnifying Images

Images can be magnified up to approximately 10 times in single image playback.

1

Slide the mode switch to .

2

Press the zoom lever toward .

Approximate position z You can move around the magnified image using

, ,

or

.

z Hold the SET button down and press the zoom lever toward to cycle through each setting, approximately 2.5 times, to approximately 5 times and 10 times.

Canceling the Magnified Display

1

Press the zoom lever toward .

Movie frames and index playback images cannot be magnified.

You can magnify an image while it is displayed on the LCD monitor in Shooting mode immediately after the image is shot

(p. 36).

Viewing Images in Sets of Nine

(Index Playback)

Up to 9 images can be viewed at once in index playback.

1

Slide the mode switch to .

2

Press the zoom lever toward .

z 9 images appear at once (index playback).

58

3

Change the image selection

The button operation in this row displays the previous set of 9 images.

Movie

Selected Images

The button operation in this row displays the next set of 9 images.

4

Press the zoom lever toward .

z Index playback cancels and the display reverts to single image playback.

Press the DISP. button to show the information for the displayed image (p. 30).

Playback – The Basics

Jumping Between Images

The display can be advanced or set back 9 images in index playback.

1

Press the zoom lever once toward while in index playback

(p. 58).

z The Jump bar appears.

2

The displayed images change.

z Jump 9 images behind or ahead using or .

z Pressing or while holding the SET button displays the first or last 9 images.

Jump Bar

3

Press the zoom lever toward .

z The jump bar disappears and the camera returns to index playback.

z If you press the zoom lever once more toward , the camera returns to single image playback.

59

Playback – The Basics

Viewing/Editing Movies

Viewing Movies

You can playback the images shot in mode.

1

Slide the mode switch to .

z Movies cannot be viewed in index playback.

2

Select a movie using or and press the SET button.

z A movie displays with the icon on it.

z The movie playback panel appears.

3

Select using or and press the SET button.

z The movie images and sound will play.

z You can adjust the volume using or .

Movie Playback

Panel Volume

60 z When a movie has finished playing, it will display the last frame.

If the SET button is pressed in this state, the camera will revert to the movie playback panel. If the SET button is pressed again, the movie will start playing from the first frame.

Pausing and Resuming Play

z Press the SET button to pause the movie.

Press it again to resume.

Fast Forwarding/Rewinding

z Select one of the following operations using

or and press the SET button.

z z z

(Exit): Return to single image playback

(First Frame): Display the first frame

(Previous Frame): Return to the previous frame (Rewinds if the

SET button is held down) z (Next Frame): Proceed on the next frame (Fast forwards if the SET button is held down) z (Last Frame): Display the last frame

You may experience frame dropping and audio breakup when playing back a movie on a computer with insufficient system resources.

z The volume at which movies play back can also be adjusted in the Set up menu

(p. 69).

z If [Mute] (p. 68) is set to [On] in the Set up menu, the volume setting returns to 0 but it can be adjusted using or .

z Please adjust the audio sound level on the TV when viewing movie files on a TV.

Editing Movies

You can delete unwanted portions from the first or second half of a movie clip.

1

Select the movie you wish to edit and press the SET button.

z See Viewing Movies (p. 60).

2

Select (Edit) using or and press the SET button.

Playback – The Basics z The movie editing panel and the movie editing bar appear.

3

Select an editing method using or

.

Movie Editing Panel z (Cut beginning):

Deletes frames in the first half of the movie.

z (Cut End):

Deletes frames in the second half of the movie.

Movie Editing Bar z (Exit):

Reverts to the movie playback panel.

4

Select the range you wish to edit

5

Select (Play) using or and press the SET button.

z The temporarily edited movie will start playing.

z The movie will stop if you press the SET button while it is playing.

61

Playback – The Basics

6

Select press the SET button.

z When is selected, the edited movie is not saved and the camera reverts to playback.

7

Select [Overwrite] or [New File] using

or and press the SET button. z [Overwrite] :

Saves the edited movie

under the same file name as the original movie. The original data is deleted.

z [New File] :

Saves the edited movie under a new file name. The original data is not deleted. z When there is not enough space left on the

CF card, only the overwrite function is available. If this happens, a small appears on the counter of the movie editing bar.

62 z Protected movies cannot be edited.

z It may take approximately 3 minutes to save an edited movie. If the batteries run out of charge partway through, edited movie clips cannot be saved. When editing movies, use fully charged NiMH batteries, unused alkaline batteries or the separately sold AC Adapter Kit

ACK600 (p. 130).

Movies with an original length of 1 second or more can be edited in 1-frame units.

Erasing

Please note that erased images cannot be recovered. Exercise caution before erasing a file.

Erasing Images Individually

1

Slide the mode switch to .

2

Select the image you wish to erase press the button.

z A confirmation screen appears.

3

Select [Erase] using or and press the SET button.

z To cancel instead of erasing, select [Cancel] and press the SET button.

Protected images cannot be erased with the erase function (p. 94).

Erasing All Images

1

In the [ (Play)] menu, select

(Erase all) and press the SET button.

z A confirmation screen appears.

2

Select [OK] using or and press the SET button.

z To cancel instead of erasing, select [Cancel] and press the SET button.

z Protected images cannot be erased with the erase function (p. 94).

z The [Erase all] function erases all the image data recorded on the CF card.

z You should format the CF card when you want to erase not only image data but also all the data contained on the card

(p. 21).

63

Shooting – Advanced Functions

Selecting Menus and Settings

Selecting Settings with the FUNC. Button (Shooting Mode Only)

3.

Select a FUNC. menu option using or and select setting contents using or .

Exposure Compensation (±0) (p. 80)

2.

FUNC.

Flash Output ( ) (p. 86)

Resolution ( ) (p. 40)

White Balance( ) (p. 81)

1

Slide the mode switch to .

2

Press the FUNC. button.

3

Select a FUNC. menu option setting contents using or

.

4

Press the FUNC. button.

5

Shoot the image.

64

Drive Mode ( ) (p. 47)

Photo Effect ( ) (p. 85)

ISO Speed ( ) (p. 84)

Light Metering ( ) (p. 79)

Resolution ( ) (Movies) (p. 40)

Compression ( ) (p. 40)

Items in ( ) show default settings.

4.

FUNC.

5.

Shoot the image

Shooting – Advanced Functions

Selecting Settings with the MENU Button

Shooting Mode Playback Mode

1

Press the MENU button.

2

Use

or

to switch between menus.

z You can also switch between menus using the zoom lever button.

3

Use

or

to select a menu item.

4

Use

or

to select the settings you wish to set.

5

Press the MENU button.

Rec. Menu Play Menu Set up Menu My Camera Menu

or or or

z For items with [...] next to them, push the SET button and carry out the settings from the next displayed menu. Once the settings are complete, press the SET button again and confirm these settings.

z In the Shooting mode, you can also close the menu by pressing the shutter button halfway.

65

Shooting – Advanced Functions z Some menu items may not be available for selection according to the Shooting mode (p. 151).

z You can apply a desired image and in Camera menu. For details, see Registering the

My Camera Settings (p. 116) or the

Software Starter Guide.

z The default of all the settings changed by the menu and button operations except for [Date/Time], [Language] and

[Video System] can be restored all at once (p. 73).

66

Shooting – Advanced Functions

Menu Settings and Default Settings

Rec. Menu

Menu Item Setting Content

AiAF

Red-eye

AF-assist Beam

Digital Zoom

Review

Date Stamp

Sets the AiAF to on (the camera automatically selects the AF frame when taking a picture) or off (AF frame is set to the center frame).

• On*/Off

Sets whether or not the red-eye reduction lamp fires.

• On*/Off

Sets the output of the AF-assist beam according to shooting conditions when using the auto focus.

• On*/Off

Sets whether or not the digital zoom combines with the optical zoom to zoom images.

• On/Off*

Sets the duration images display on the LCD monitor after the shutter button is released.

• Off and 2* to 10 sec.

Sets the date format to be embedded in image data when is selected.

• Off*/Date/Date & Time

* Default setting

Reference

Page

78

42

36

46

36

54

67

Shooting – Advanced Functions

Play Menu

Item Setting Content

Protect

Rotate

Protects images from accidental erasure.

Rotates images 90 or 270 degrees clockwise in the display.

Sound Memo Adds sound memos to images.

Erase All Erases all images from a CF card (excluding protected images).

Auto Play

Print Order

Plays images automatically one after the other.

Sets which images and how many copies will be printed on a printer with the direct print function or at a photo lab service.

Transfer Order

Sets in advance the images that will be transferred to a computer by the camera.

Set up Menu

Item

Mute

Reference

Page

94

91

92

63

93

98

102

Setting Content

Set [On] to mute the start-up sound, operation sound, self-timer sound and shutter sound all at once. For details, see How the Mute setting in the [ (Set up)] menu and each sound setting in the [ (My

Camera)] menu are related on page 72.

• On/Off *

Note that the error warning signal beeps even when the Mute setting is [On].

Reference

Page

-

* Default setting

68

Item

Volume

* Default setting

Shooting – Advanced Functions

Setting Content

Adjusts the volume of the start-up sound, operation sound, self-timer sound, shutter sound, or playback sound. The volume cannot be adjusted if [Mute] is set to [On].

• (Off) • (3)

• (1)

• (2)*

• (4)

• (5)

Shutter Volume

Adjusts the Shutter Sound volume when the shutter button is pressed all the way. There is no shutter sound in Movie mode.

Playback Volume

Adjusts the sound volume when a sound memo or movie is played.

Start-up Volume

Adjusts the Start-up Sound volume when the camera powers up.

Operation Volume

Adjusts the Operation Sound volume when any button except the shutter button is operated.

Self-timer Volume

Adjusts the volume of the Self-timer Sound heard from 2 seconds prior to the shot until the actual shot.

Reference

Page

-

34

60, 92

25

-

45

69

Shooting – Advanced Functions

Item

Power Saving

Date/Time

Format

File No. Reset

Auto Rotate

Setting Content

The Auto Power Down and Display Off settings can be set by pressing the SET button.

Auto Power Down

Sets whether or not the camera automatically powers down after a specified period of time elapses without camera operation.

• On* /Off

Display Off

Specifies a period of time before the LCD monitor turns off when no camera operation is performed.

• 10 sec. • 1 min.*

• 20 sec. • 2 min.

• 30 sec. • 3 min.

Sets the date, time and date format.

Formats (initializes) a CF card.

Sets how file numbers are assigned to images.

• On/Off *

Sets whether or not images shot with the camera held vertically are automatically rotated in the display.

• On*/Off

Reference

Page

25

26

22

21

114

89

* Default setting

70

Shooting – Advanced Functions

Item Setting Content

Distance Units

Language

Video System

Sets the format of the MF indicator’s displayed distance units.

• m/cm*

• ft/in

Sets the language used in the menus and messages on the LCD monitor.

English*

Deutsch

Italiano

Norsk

Français Svenska

Nederlands Español

Dansk

Suomi

Chinese

Japanese

You can change the language during image playback by holding the

SET button and pressing the MENU button.

Sets the video output signal standard.

• NTSC

• PAL

* Default setting

Reference

Page

89

24

113

71

Shooting – Advanced Functions

Customizing the Camera (My Camera Settings)

You can select the theme, start-up image and sound, shutter sound, operation sound and self-timer sound used on this camera. These are called My Camera settings. You can also customize the and options for each item with images from the CF card and newly recorded sounds or by using the supplied software. See the Software Starter Guide for details.

Item/Menu Screen Setting Content

Reference

Page

Theme

Selects a common theme for the start-up image, startup sound, shutter sound, operation sound, and self-timer sound.* 1

Start-up Image Sets Start-up image when you turn on the camera.

Start-up Sound Sets the start-up sound when you turn on the camera.*

1

Operation Sound

Sets the sound when any button other than the shutter button is operated.* 1

115

115

115

115

Self-timer Sound

Shutter Sound

Sets the sound informing you that the photo will be taken in 2 seconds.*

1

Sets the shutter sound when you press the shutter button. There is no shutter sound in Movie mode.*

1

115

115

My Camera menu settings content

(Off)/ */ / 115

* Default setting

*

1

How the [Mute] setting in the [ (Set up)] menu and each sound setting in the [ (My Camera)] menu are related

To turn off the start-up sound, the shutter sound, operation sound, and self-timer sound all at once, set [Mute] in the [

(Set up)] menu to [On]. This setting overrides each setting for those sounds. Note that the error warning signal beeps even when the [Mute] setting is [On].

72

Resetting the Settings to Default

You can reset the menu and button operation settings to default.

1

Turn on the camera.

z Can be performed from Shooting or Playback mode.

2

Press the MENU button for longer than 5 seconds.

z The message “Reset settings to default?” appears on the LCD monitor.

3

Press select [OK], and press the SET button.

z The screen on the right appears while resetting.

The normal screen resumes when resetting is complete.

z To cancel resetting, select [Cancel] instead of

[OK].

Shooting – Advanced Functions z The following settings do not reset to default.

- Date/Time, Language and Video System in the [ (Set up)] menu (p. 68, 69)

- The custom white balance (p. 82)

- Newly registered My Camera settings

(p. 115) z When the camera is connected to a computer or a printer, this operation does not work.

73

Shooting – Advanced Functions

Using the Mode Dial (Creative Zone)

Mode Dial

You can freely select camera settings such as the shutter speed and aperture value to suit your shooting purposes.

After settings are made, shooting procedures are the same as for the mode (p. 33).

See Functions Available in Each Shooting Mode

(p. 151) at the end of this manual to find out which settings can be changed in which shooting modes.

How to Use the Mode Dial

1

Check that the camera is in

Shooting mode.

2

Turn the mode dial and set the icon of the function you wish to use to .

z If the LCD monitor is on, the shutter speed and aperture value appear automatically.

z , and mode settings are made the following way.

: Select a shutter speed using or .

: Select an aperture value using or .

: Select a shutter speed using or , press the SET button and select an aperture value using or .

z The correct exposure has been set if the shutter speed and aperture value show in white on the LCD monitor.

3

Shoot the image.

74

Program AE

Use the program AE mode to have the camera automatically set the shutter speed and aperture value to match the brightness of the scene.

z The shutter speed and aperture value will show in red on the LCD monitor when the correct exposure cannot be obtained. Use the following methods to obtain the correct exposure and make them appear in white.

• Use the flash

• Change the ISO speed

• Change the light metering mode

Differences between the and Modes.

z The following settings can be adjusted in mode, but not in mode.

• Exposure Compensation • White Balance

• ISO Speed • Flash (Flash on)

• Photo Effects

• Light Metering Mode

• Autofocus

• Continuous Shooting

• Manual Focus z For the correlation between aperture value and shutter speed, see page 76.

Shooting – Advanced Functions

Setting the Shutter Speed

When you set the shutter speed in the shutter speed-priority AE mode, the camera automatically selects an aperture value to match the brightness.

Faster shutter speeds allow you to catch an instantaneous image of a moving subject while slower speeds create a flowing effect and allow you to shoot without a flash in dark areas.

z If the aperture value shows in red, the image is underexposed (insufficient light) or overexposed (too much light). Adjust the shutter speed using or until the aperture value display turns to white.

z The nature of CCD image sensors is such that noise in the recorded image increases at slow shutter speeds. This camera, however, applies special processing to images shot at shutter speeds slower than 1.3 seconds to eliminate the noise, thereby producing high-quality images. Nevertheless, a certain amount of processing time may be required before the next image can be shot.

75

Shooting – Advanced Functions

76 z Please note that camera shake becomes a factor at low shutter speeds.

If the camera shake warning appears in the center of the LCD monitor, secure the camera to a tripod before shooting.

z The aperture value and shutter speed change according to the zoom state as follows.

Telephoto

Aperture

F2.8

Wide Angle F3.2 - 4.0

F4.5 - 8.0

F4.8

F5.6 - 7.1

F8.0

Shutter Speed

(seconds) to 1/1250 to 1/1600 to 1/2000 to 1/1250 to 1/1600 to 1/2000 z The fastest shutter speed for flash synchronization is 1/500 second. The camera automatically resets the shutter speed to 1/500 second if a faster speed is selected.

Shutter Speed Display

The numbers in the table below indicate the shutter speed in seconds. For slower speeds, quote marks indicate the decimal place, so that 0"3 indicates 0.3 second and 2" indicates 2 seconds.

15" 13" 10" 8" 6" 5" 4" 3"2 2"5 2" 1"6 1"3

1" 0"8 0"6 0"5 0"4 0"3

1/4 1/5 1/6 1/8 1/10 1/13 1/15 1/20 1/25 1/30

1/40 1/50 1/60 1/80 1/100 1/125

1/160 1/200 1/250 1/320 1/400 1/500

1/640 1/800 1/1000 1/1250 1/1600

1/2000

Setting the Aperture

The aperture adjusts the amount of light that passes through the lens. Selecting a lower aperture value (opening the aperture) allows you to fade the background.

A higher aperture value (closing it) brings the entire range from foreground to background into focus.

z If the shutter speed shows in red on the

LCD monitor, the image is underexposed (insufficient light) or overexposed (too much light). Adjust the aperture value using or until the shutter speed display turns white.

z Some aperture values may not be available with certain zoom positions (p. 76).

z Please note that camera shake becomes a factor with larger aperture values that slow down shutter speeds. If (camera shake warning) appears in the LCD monitor, secure the camera to a tripod before shooting.

z In this mode, the shutter speed range with synchronized flash is 1/60 second to 1/500 second. The aperture value setting may therefore be changed automatically to match the synchronized flash speed even if its value was set previously.

Shooting – Advanced Functions

Aperture Value Display

The larger the aperture value, the smaller the lens aperture.

F2.8 F3.2 F3.5 F4.0 F4.5 F4.8 F5.0

F5.6 F6.3 F7.1 F8.0

Manually Setting the Shutter

Speed and Aperture

You can manually set the shutter speed and aperture to shoot images. You can select settings such as a long exposure to suit your purpose.

z When you press the shutter button halfway, a number indicating the difference between the standard exposure* and the selected exposure appears on the LCD monitor. If the difference is more than ±2 steps, “-2” or “+2” appears in red.

* The standard exposure is calculated by the

AE function according to the selected metering mode.

77

78

Shooting – Advanced Functions z See page 151 for settings that can be changed in this mode.

z If you wish to change the exposure, select the shutter speed or the aperture with the SET button and change the value using or .

z The LCD monitor’s brightness matches the selected shutter speed and aperture value. When you select a fast shutter speed or shoot a subject in a dark place and set the flash to (Red-eye

Reduction, Flash On) or (Flash On) the LCD monitor will always light up.

z For the correlation between aperture value and shutter speed, see page 76.

Switching between Autofocus Modes

Mode Dial

You can change the autofocus frame (AF frame) selection method. The AF frame will appear when the LCD monitor is turned on

(p. 28).

On

(Auto

Selection)

OFF

(Center)

The camera automatically selects between 9 AF frames to focus according to the shooting conditions.

Of 9 AF frames, the middle one is selected to focus. This is convenient for making sure the focus is exactly where you want it.

indicates the AF frame which appears on the monitor

1

In the [ (Rec.)] menu, select

(AiAF).

z See Selecting Menus and Settings (p. 65).

2

Select [On] or [Off]

3

Press the MENU button.

z You can immediately shoot the image using the selected AF frame by pressing the shutter button instead of pressing the MENU button.

The autofocus locks to center when using the digital zoom.

Shooting – Advanced Functions

Switching between Light

Metering Modes

Mode Dial

Evaluative

Metering

Appropriate for standard shooting conditions, including backlit scenes. The camera divides images into several zones for light metering. It evaluates the complex lighting conditions, such as the position of the subject, the brightness, the direct light, and the backlighting, and adjusts the settings to the correct exposure for the main subject.

Centerweighted

Averaging

Averages the light metered from the entire frame, but gives greater weight to the subject matter at the center.

Spot AE

Point

Meters the area within the spot

AE point at the center of the

LCD monitor. This is convenient when you wish to set the exposure adjustment on the subject.

79

Shooting – Advanced Functions

1

Select *

(Evaluative) from the FUNC. menu.

z See Selecting Menus

and Settings (p. 65).

* The current setting is displayed.

2

Select a light metering mode

3

Press the FUNC. button.

Adjusting the Exposure

Mode Dial

Adjust the exposure compensation setting to avoid making the subject too dark when it is backlit or shot against a bright background.

1

Select * from the FUNC. menu.

z See Selecting Menus

and Settings (p. 64).

* The current setting is displayed.

2

Adjust the compensation z The settings can be adjusted in 1/3 stops in the range of -2EV to +2EV.

z You can check the results of the compensation by viewing the image on the

LCD monitor when it is on.

80

z You can shoot the image right after selecting settings by pressing the shutter button. The menu displays again after the shot, allowing you to change the settings easily.

3

Press the FUNC. button.

z To cancel the exposure compensation, return the setting to 0 using or .

Shooting – Advanced Functions

Adjusting the Tone (White Balance)

Mode Dial

When the white balance is set to match the light source, the camera can reproduce colors more accurately.

Auto

Daylight

Cloudy

The camera sets the white balance automatically according to shooting conditions.

Use when shooting outdoors in sunlight on a clear day.

Use when shooting outdoors and the sunlight is not enough such as under cloudy skies, in shade or at dusk.

Tungsten

For shooting under tungsten and bulb-type 3-wavelength fluorescent lighting.

Fluorescent

For shooting under warm-white, cool-white or warm-white

(3-wavelength) fluorescent lighting.

81

Shooting – Advanced Functions

Fluorescent

H

For shooting under daylight fluorescent, or daylight fluorescent-type (3-wavelength) fluorescent lighting.

Custom

For setting a custom value with a white sheet of paper, etc., to obtain the optimal white balance for the conditions.

1

Select * (Auto) in the FUNC. menu.

z See Selecting Menus and Settings (p. 64).

* The current setting is displayed.

2

Select the white balance you wish to z See on the right regarding the custom setting.

z When the LCD monitor is on, you can check the setting on the display.

z A shot can be taken immediately by pressing the shutter button. The menu will reappear after the shot, allowing you to adjust the setting.

3

Press the FUNC. button.

The white balance cannot be adjusted when the photo effect is set to (sepia) or (B / W).

Setting a Custom White Balance

You can set a custom white balance to obtain optimal settings for your particular shooting conditions by having the camera evaluate a subject such as a white piece of paper or cloth. In the following three situations the white balance may not be correctly adjusted in (Auto). Always shoot after reading and setting the white balance data in

(Custom).

z Shooting at close distances (Macro mode) z Shooting monotone subjects (such as the sky, sea, forest, and so on) z Shooting under special light sources such as mercury lamps

82

1

Select * (Auto) from the FUNC. menu.

z See Selecting Menus and Settings (p. 64).

* The current setting is displayed.

2

Select (Custom) using or .

3

Aim the camera at a piece of white paper or cloth or gray card, and press the SET button.

z Aim the camera so that the white paper or cloth completely fills the frame at the center of the LCD monitor or completely fills the viewfinder before pressing the SET button.

The camera reads the white balance data when you press the SET button.

z You can shoot right after setting the white balance. The menu displays again after the shot, allowing you to change the settings easily.

4

Press the FUNC. button.

Shooting – Advanced Functions z Some settings are not available with certain Shooting modes. Please refer to

Functions Available in Each Shooting

Mode (p. 151).

z To set and use a custom white balance setting, it is advisable to select the

Shooting mode and set the exposure compensation to zero (±0). The correct white balance may not be obtained when the exposure is incorrect (image is completely black or white).

z It is also advisable to use the LCD monitor to compose the shot and to zoom in to the telephoto end setting. In this case, set the digital zoom to [Off].

z Since the white balance data cannot be read in mode, preset the white balance in another Shooting mode.

z Shoot with the same settings as when reading the white balance data. If the settings differ, the optimal white balance may not be set. Especially the following should not be changed.

83

84

Shooting – Advanced Functions

• Flash

Setting the flash to on or off is recommended. If the flash fires when reading the white balance data with the flash set to Auto with red-eye reduction or Auto, make sure that you also use the flash when you shoot.

• ISO Speed z The custom white balance setting is not canceled even if settings are reset to default settings. (p. 73)

Changing the ISO Speed

Mode Dial

Raise the ISO speed when you wish to reduce camera shake, when turning the flash off for use in dark conditions, or when a fast shutter speed is required.

1

Select * (ISO Speed) from the

FUNC. menu.

z See Selecting Menus and Settings (p. 64).

* The current setting is displayed.

2

Select an ISO speed using or

.

z A shot can be taken immediately by pressing the shutter button. The menu will reappear after the shot, allowing you to adjust the settings easily.

3

Press the FUNC. button.

z Higher ISO speeds increase the image noise. To take clean images, use as low an ISO speed as possible. z The AUTO setting selects the optimal speed. It will also automatically raise the speed when the light from the flash is insufficient to illuminate the subject matter.

You can easily shoot images in dark places such as indoor settings by using the

(Indoor (p. 51)) option of the SCN mode.

Shooting – Advanced Functions

Changing the Photo Effect

Mode Dial

By setting a photo effect before you shoot, you can change the look and feel of the pictures you take.

Effect Off

Vivid

Neutral

Low

Sharpening

Sepia

B/W

Records normally with this setting.

Emphasizes the contrast and color saturation to record in bold colors.

Tones down the contrast and color saturation to record neutral hues.

Records subjects with softened outlines.

Records images in sepia tones.

Records images in black and white.

85

Shooting – Advanced Functions

1

Select * (Effect OFF) in the

FUNC. menu.

z See Selecting Menus and Settings (p. 64).

* The current setting is displayed.

2

Select the photo effect using or

.

z If the LCD monitor is on, you can check the photo effect by viewing the image on the LCD monitor.

z A shot can be taken immediately by pressing the shutter button. The menu will reappear after the shot, allowing you to adjust the settings easily.

3

Press the FUNC. button.

Adjusting the Flash Output

Mode Dial

In mode, the flash output can be controlled in three steps when shooting.

1

Select

Output) from the

FUNC. menu.

z See Selecting Menus

and Settings (p. 64).

2

Adjust the flash output using or .

z You can shoot the image right after selecting settings by pressing the shutter button. The menu displays again after the shot, allowing you to change the settings easily.

3

Press the FUNC. button.

When the flash output is low, less shadow appears in the image. However, when shooting a wide scene or area, the image will likely be darker due to insufficient light. When adjusting the flash output, consider all the shooting conditions, including the distance to the subject.

86

Shooting Problem Subjects for the Autofocus

Mode Dial

The following types of subjects may not be suited to autofocus photography.

• Subjects with extremely low contrast to the surroundings

• Subjects mixing close and far objects

• Subjects with extremely bright objects at the center of the composition

• Subjects that are moving quickly

• Subject with horizontal stripes

To shoot these subjects, first aim the camera at an object at a similar distance, lock the focus and recompose the image with the desired subject, or use manual focus.

Shooting – Advanced Functions

Shooting with Focus Lock

1

Press the DISP. button to turn on the LCD monitor.

2

Aim the AF frame at an object at a similar distance to the subject you wish to shoot.

3

Press the shutter button halfway to lock the focus.

z The AE setting will also lock when you do this. The exposure may occasionally be incorrect if the difference between the two items is too great. Use AF Lock when this happens.

4

Recompose the image and press the shutter button all the way to shoot the image.

87

Shooting – Advanced Functions

Shooting with AF Lock

1

Press the DISP. button to turn on the LCD monitor.

2

Press the shutter button halfway to lock the focus. Keep it pressed and press the MF button.

z The icon appears on the LCD monitor.

z The focus setting will lock even if the shutter button and the MF button are released.

z The AF lock setting will cancel if the MF button is pressed again.

3

Recompose the image and press the shutter button all the way to shoot the image.

AF lock is not available in modes.

and

88 z When shooting in focus lock, you can lock the focus to the subject in the center

AF frame by setting to off in the [

(Rec.)] menu.

z Shooting with AF Lock is convenient because you can let go of the shutter button to recompose the image.

Moreover, the focus remains locked after the picture is taken, allowing you to capture a second image with the same focus.

z When shooting through glass, get as close as possible to avoid reflection off the glass.

Shooting in Manual Focus Mode

The focus can be manually set.

1

Press the DISP. button to turn on the LCD monitor.

2

Press the MF button until appears.

appears.

approximate figures. Use them as a shooting guideline only.

indicator z In the , , or modes, pressing the

SET button cycles the selection between the shutter speed, the aperture value, and the

MF indicator. (A green appears next to the selected item).

3

Focus using or and shoot the image.

Shooting – Advanced Functions z Adjust the focus using or until the image appears focused on the LCD monitor.

z Pressing the MF button a second time cancels the manual focus mode.

z You can use manual focus in the macro focal distance 5 to 46 cm (2.0 in. to 1.5 ft.) at wide angle end and 26 to 46 cm

(10 in. to 1.5 ft.) at telephoto end. In this case, the fine scale is adopted.

z You can change the MF indicator displayed distance units (p. 71).

Setting the Auto Rotate Function

This camera is equipped with an Intelligent

Orientation sensor that detects the orientation of an image shot with the camera held vertically and automatically rotates it to the correct viewing orientation in the display.

You can set this function on/off.

89

Shooting – Advanced Functions

1

In the [ (Set up)] menu, select

(Auto Rotate).

z See Selecting Menus

and Settings (p. 65).

2

Select [On] and press the MENU button.

z When this function is on, an icon showing the orientation of the camera appears at the upper right corner of the LCD monitor (when information display is on).

Normal

Right end down

Left end down z This function may not operate correctly when the camera is pointed straight up or down. Check that the arrow is pointing in the right direction and if it is not, then set the Auto Rotate function to

[Off].

z Even if the Auto Rotate function is set to

[On], the orientation of images downloaded to a computer will depend upon the software used to download the images.

z When the camera is held vertically to shoot, the Intelligent Orientation sensor judges the upper end to be “up” and the lower end to be “down”. It then regulates the optimal white balance and exposure for vertical photography. This function operates regardless of the on/off status of the Auto Rotate function.

z When changing the camera’s orientation between the horizontal and vertical positions, you may hear noise coming from the orientation detection mechanism. This is not a malfunction.

90

Playback – Advanced Features

Rotating Images in the Display

You can rotate an image by 90° or 270° clockwise in the LCD monitor.

z Movie images cannot be rotated.

z If an image has been rotated in the camera before being loaded onto a computer, the particular software in use will determine whether or not the rotation settings are retained.

Rotated images can be magnified (p. 58).

0° (Original) 90° 270°

1

In the [ (Play)] menu, select

(Rotate).

z See Selecting Menus and Settings (p. 64).

2

Press or to select the image to be rotated and press the SET button.

z Press the SET button to rotate the image 90°,

270° and back to original orientation.

3

Press the MENU button.

z The Play menu appears again. Press the

MENU button again to close the menu.

91

Playback – Advanced Features

Attaching Sound Memos to Image

In Playback mode (including single image playback, index playback and magnified playback) you can attach sound memos (up to 60 seconds) to an image. The sound data are saved in WAVE format.

1

Select (Sound Memo) from the

[ (Play)] menu.

z See Selecting Menus and Settings (p. 65).

z appears.

2

Select the image to which you wish to attach the sound memo using or , and press the SET button.

Sound Memo Panel z The Sound Memo panel appears.

3

Select press the SET button.

z The recording starts and the elapsed time is displayed. Speak towards the microphone of the camera.

z To stop recording, press the SET button. To restart recording press the SET button again.

z You can add as many sound memos as you like until their total reaches 60 seconds.

Playing the Sound Memos z Select (Play) in step 3. The icon is displayed on images with sound memos.

z To stop playback, press the SET button. To resume playback, press the SET button again.

You can adjust the volume using or .

Erasing the Sound Memos z Select in step 3.

Exiting the Sound Memos z Press the MENU button.

92

z You cannot attach sound memos to movies.

z You cannot record or play back sound memos for images that already have an incompatible sound file attached. If you attempt to record or play such images the “Incompatible WAVE format” message will display. z Sound memos for protected images cannot be erased (p. 94).

z You can also adjust the volume of the sound memo in the Set up menu (p. 69).

z If you set [Mute] to [On] in the Set up menu (p. 68), no sound is reproduced.

However, you can resume the sound and adjust the volume during movie playback by pressing or .

Playback – Advanced Features

Auto Play

Use this feature to automatically play back all of the images in the CF card (Auto Play). The

LCD monitor displays each image for approximately 3 seconds.

1

In the [ (Play)] Menu, select

(Auto Play).

z See Selecting Menus and Settings (p. 65).

z Once you have selected it, Auto Play starts.

z As with the single image playback mode, pressing or during auto play will advance through the images more rapidly.

Pausing and Resuming Auto Play z You can pause Auto Play at any time by pressing the SET button. You can then restart it by pressing the SET button again.

Stopping Auto Play z To stop Auto Play, press the MENU button.

93

Playback – Advanced Features z The display interval may vary for some images.

z Movie images play for the length of time that they were recorded.

z The power saving function is disabled during Auto Play (p. 93).

Protecting Images

Use the protect feature to protect important images from accidental erasure.

1

In the [ (Play)] menu, select

(Protect).

z See Selecting Menus and Settings (p. 64).

2

Select an image you want to protect using or

and press the

SET button.

Protected Icon z The icon appears on protected images.

z To release the protection, press the SET button again.

z Images can be selected in both single image playback and index playback modes (p. 57,

58).

3

Press the MENU button.

z The camera returns to the menu screen.

Press the MENU button again to exit the menu screen.

Please note that formatting (initializing) a

CF card erases all data, including protected images (p. 21) and other file types. Please check the contents of a CF card before formatting it.

94

Playback – Advanced Features

95

Various Functions

About Printing

Images shot with this camera can be printed using one of the following methods.

- Connecting the camera to a direct print compatible printer*

1

with a single cable and pressing the button on the camera.

- Selecting images and specifying the number of print copies (DPOF*

2

print settings) with the camera before sending the images (CF card) to a photo developing center that supports

DPOF.

*

1

This camera complies with the PictBridge standard, which allows you to print with non-

Canon PictBridge compliant printers as well.

*

2

Digital Print Order Format

This manual explains the DPOF print settings.

For information on how to print images, refer to the Direct Print User Guide supplied with the camera. Also, refer to your printer’s manual.

96

Direct Print Compatible Printers

• CP Printer

• Bubble Jet Printer

• Non-Canon PictBridge compliant printers

CF Card Photo Lab

Various Functions

Direct Print Compatible Printing

• Connect the camera to the printer

• Set various print settings (except DPOF print settings)

• Print

For printing instructions, see the Direct Print User Guide

(separate from this guide).

Print

DPOF Print Settings z Select the image you want to print (p. 98) z Select how many copies you want (p. 98) z Select the print style (p. 100)

• Standard/Index/Both

• Date On/Off

• File Numbers On/Off

For printing instructions, see the Direct Print User Guide.

DPOF Transfer Settings z Select the image you want to download to a computer (p. 103)

Please refer to the System Map supplied with your camera for direct print compatible printer information (CP series or Bubble Jet printers).

97

Various Functions

DPOF Print Settings

You can select images on a CF card for printing and specify the number of print copies in advance using the camera. This is extremely convenient for sending the images to a photo developing service that supports

DPOF or for printing on a direct print function compatible printer.

Refer to the Direct Print User Guide for instructions on how to select print settings from the printer.

Selecting Images for Printing

1

In the [ (Play)] menu, select

(Print Order) and press the SET button.

z See Selecting Menus and Settings (p. 65).

2

Select [Order] press the SET button.

z The mark may appear on images that have had print marks set by another

DPOF compliant camera. These settings will be overwritten by any print marks set by your camera.

z The output of some digital printers or photo lab services may not reflect the specified print settings.

z Movies cannot be printed.

3

Select images for printing.

Single Images z When the print type

(p. 100) is set to

[Standard] or [Both], select an image using or . You can set the number of copies (up to

99) to be printed using or .

Number of Copies

98

z When the print type

(p. 100) is set to [Index], select an image using or and mark or remove marks from images using or .

A check mark appears on the marked image.

z You can press the zoom lever and use the same procedures to select images in index playback (three images).

All the Images on a CF Card z Press the zoom lever to switch to index playback

(three images).

z You can set one copy of each image to print by pressing the SET button, then selecting [Mark all] using or , and pressing the SET button again.

z When the print type is set to [Standard] or

[Both], the setting for the number of print copies can be changed for each image.

Various Functions

When [Index] is selected, the print settings can be deleted. For the instructions on changing settings, please reread Step 3 from the beginning. z You can cancel all the settings by selecting

[Clear all].

4

Press the MENU button.

z The setting will be complete and the Print

Order menu will reappear.

z Images are printed in order from oldest to newest by the shooting date.

z A maximum of 998 images can be set.

z When [Print Type] is set to [Both], the number of copies can be set. When it is set to [Index], the number of copies cannot be set (only one copy will be printed).

z Print settings can also be assigned to images with the bundled software programs ZoomBrowser EX or

ImageBrowser on a computer. However, do not set the date in the DPOF print

99

Various Functions settings when printing images that have had the date embedded with the [Date

Stamp] function. This may cause the date to be printed twice.

Setting the Print Style

You can set up the print style as follows.

Print

Type

Standard

Index

Both

Print one image per sheet.

Print index prints

(multiple reduced-size images per page).

Print selected images both in standard and index format.

Date

File No.

Include the date on the print.

Include the file number on the print.

1

In the [ (Play)] menu, select

(Print Order) and press the SET button.

z See Selecting Menus and Settings (p. 65).

2

Select [Set up] press the SET button.

100

3

Select (Print Type), (Date) or

(File No.) using or .

4

Select a setting using or .

Print Type

Select [Standard], [Index] or [Both].

Date

Select [On] or [Off].

File No.

Select [On] or [Off].

Various Functions

5

Press the MENU button.

z The set up menu will close and the Print

Order menu will reappear.

z If you have chosen [Index] as the print type, you cannot set [Date] and [File

No.] to [On] at the same time.

z With CP printers, if you have chosen

[Both] as the print type, you can set both

[Date] and [File No.] to [On], however, only the file number is printed for the index print.

The date prints as the date and time in the format specified in the Set Date/Time menu (p. 22).

Resetting the Print Settings

The Reset feature clears all print selections, and resets Print Type to [Standard], Date to

[Off], and File No. to [Off].

101

Various Functions

1

In the [ (Play)] menu, select

(Print Order) and press the SET button.

z See Selecting Menus and Settings (p. 65).

2

Use select [Reset] and press the SET button.

3

Use or to select [OK] and press the SET button.

z Select [Cancel] and press the SET button to cancel the reset.

Image Transfer Settings

(DPOF Transfer Order)

You can use the camera to specify settings for images before downloading to a computer. Refer to the Software Starter

Guide for instructions on how to transfer images to your computer. You cannot use this function to transfer several images at once to a Mac OS X computer.

The settings used on the camera comply with the Digital Print Order Format (DPOF) standards.

The mark may appear on images that have had transfer marks set by another

DPOF compliant camera. These settings will be overwritten by any marks set by your camera.

102

Selecting Images for Transferring

1

In the [ (Play)] menu, select

(Transfer Order) and press the

SET button.

z See Selecting Menus and Settings (p. 65).

2

Use select [Order] and press the SET button.

z You can remove all the transfer marks at once by selecting [Reset].

3

Select images for transferring.

For setting images one by one z Use or to select the image and mark or remove checkmarks from images using or .

The check marks are displayed when set.

z The above method can be used even if you press the zoom lever toward to switch to index playback (3-images display).

Various Functions

For setting all images on the CF card z Switch to index playback

(a set of three images) by pressing the zoom lever toward .

z Press the SET button, select [Mark all] using or and press the SET button again to mark all the images. (If you select [Clear all] instead of [Mark all], you can remove marks from all the images.) z You can select images using or and change the settings using or after

[Mark all] or [Clear all] has been selected.

4

Press the MENU button.

z The selection mode will turn off and the

Transfer Order menu will reappear.

z Images are transferred in order from oldest to newest by the shooting date.

z A maximum of 998 images can be marked.

103

Various Functions

Downloading Images to a Computer

The following methods can be used to download images recorded by the camera to a computer. Some methods are not applicable to all operating systems.

z

Downloading via a Camera to

Computer Connection

Windows

98

Windows

Me

Windows

2000

Windows

XP

Mac

OS 9

Mac

OS X z With this method, you download images using computer commands after you have installed the appropriate software.

See Connecting the Camera to a

Computer on the right and the separate

Software Starter Guide.

Windows

98

Windows

Me

Windows

2000

Windows

XP z With this method, you download images using camera button operations after you have installed the appropriate software (the computer settings only need to be adjusted for the first download).

See Connecting the Camera to a

Computer on the right and Downloading

Images by Direct Transfer (p. 109).

104

Windows

XP

Mac

OS X z With this method, you download images using computer commands without installing any software.

See Connecting the Camera to a

Computer (below)(software installation is not required) and Connecting the

Camera to the Computer to Download

Images without Installing the Software

(p. 111).

z

Downloading Directly from a CF Card

With this method, you download images using a card adapter or card reader.

See Downloading Directly from a CF Card

(p. 111).

Connecting the Camera to a Computer

Computer System Requirements z

Windows

OS

Windows 98 (Including Second Edition)

Windows Me

Windows 2000

Windows XP (Home Edition,

Professional)

Computer

Model

CPU

RAM

The above OS should be pre-installed on computers with built-in USB ports.

Windows 98/Windows Me/Windows

2000: Pentium 150 MHz or higher processor

Windows XP: Pentium 300 MHz or higher processor

For all of the above OS: Pentium 500

MHz or higher processor is recommended (for editing movies)

Windows 98/Windows Me/Windows

2000: 64 MB or more

Windows XP: 128 MB or more

For all of the above OS: 128 MB or more is recommended (for editing movies)

Interface USB

Free Hard

Disk

Space zCanon Utilities

- ZoomBrowser EX: 200 MB or more

(Including the PhotoRecord printing program)

- PhotoStitch: 40 MB or more zCanon Camera TWAIN Driver:

25 MB or more zCanon Camera WIA Driver:

25 MB or more

Various Functions

Display

800 x 600 pixels/High Color (16 bit) or better is required

1,024 x 768 pixels or better is recommended z

Macintosh

OS

Mac OS 9.0 – 9.2,

Mac OS X (v10.1/v10.2)

Computer

Model

CPU

The above OS should be preinstalled on computers with built-in

USB ports.

PowerPC

RAM

Mac OS 9.0 – 9.2: 64 MB or more of application memory

Mac OS X (v10.1/v10.2): 128 MB or more

Interface USB

Free Hard

Disk

Space

Display zCanon Utilities

- ImageBrowser: 120 MB or more

- PhotoStitch: 30 MB or more

800 x 600 pixels/32,000 colors or better is required

1,024 x 768 pixels or better is recommended

105

Various Functions

IMPORTANT

You must install the software and driver bundled on the supplied Canon Digital Camera Solution

Disk onto your computer before connecting the camera to a computer.

The camera will not operate correctly if you connect it to your computer before installing the driver and software. If this happens, please refer to the

Troubleshooting section of the Software

Starter Guide.

z You do not need to turn off the camera or computer power when making a USB connection.

z Please refer to your computer’s manual for information regarding the location of the USB port.

z You are recommended to use new AA size batteries, fully charged AA size

NiMH batteries or AC Adapter Kit

ACK600 (sold separately) to power the camera when connecting to a computer

(p. 128, 130).

106 z All procedures performed with a connection to a USB 2.0 compliant board are not guaranteed.

1

Install the driver and the software applications bundled on the

Canon Digital Camera Solution

Disk.

z Please see the Software Starter Guide for the installation procedures.

2

Use the supplied interface cable to connect the computer's USB port to the camera's DIGITAL terminal.

USB port

Interface cable

DIGITALTerminal

1.Open the terminal cover with your finger nail.

2.Insert the connector until it clicks.

Various Functions

5

Select [Canon CameraWindow] in the events dialog that appears on the computer and click [OK] (first time only).

Always grasp the connector to remove the interface cable from the camera's DIGITAL terminal.

3

Set the camera's mode switch to .

4

Press the ON/OFF button until the power lamp lights green.

z Windows

J Proceed to steps 5 and 6 below.

z Macintosh

J Refer to the Software Starter Guide and download images.

If the events dialog fails to appear, click the

[Start] menu, followed by [Programs] or

[All Programs], [Canon Utilities],

[CameraWindows], and [CameraWindow -

Set Auto-Launch].

107

Various Functions

6

Click [Set] in the [CameraWindow

- Set Auto-Launch] window (first time only).

z Using the software and computer to download images:

J See the Software Starter Guide.

z Using the Camera to Download Images

(Direct Transfer Function):

J See Downloading Images by Direct Transfer

(p. 109).

z The Download Image window will display.

108

Downloading Images by Direct

Transfer

Use this method to download images using camera operations.

Install the supplied software and adjust the computer settings before using this method for the first time (p. 106).

All Images

New Images

DPOF Trans.

Images

Select &

Transfer

Transfers and saves all images to the computer.

Transfers and saves to the computer only the images that have not been previously transferred.

Transfers and saves to the computer only the images with DPOF Transfer Order settings (p. 102).

Transfers and saves single images to the computer as you view and select them.

Various Functions

Wallpaper

Transfers and saves single images to the computer as you view and select them.

The transferred images display on the computer desktop.

1

Confirm that the

Direct Transfer menu is displayed on the camera's

LCD monitor. z The blue.

button will light

Direct Transfer Menu z Press the MENU button if the Direct Transfer menu fails to appear.

109

Various Functions

All Images/New Images/DPOF Trans.

Images

2

Use

and press the

button. z To cancel the transfer, press the SET button.

z The images will download and the Direct

Transfer menu will reappear.

3

Use or to select images to download and press the button (or SET button).

z The images will download.

z The button will blink blue while downloading is in progress.

4

Press the MENU button.

z The Direct Transfer menu will display again.

Only JPEG format images can be downloaded as wallpaper for the computer.

Select & Transfer/Wallpaper

2

Use or to select or and press the button).

button (or SET

The option selected with the button is retained even when the camera's power is shut off. The previous setting will be in effect the next time the Direct Transfer menu is displayed. The image selection screen will appear directly when the Select and Transfer or the Wallpaper option was last selected.

110

Connecting the Camera to the

Computer to Download Images without Installing the Software

If you are using Windows XP or Mac OS X (v10.1 or v10.2), you can use the software distributed with these operating systems to download images

(JPEG format only) without installing the software bundled on the Canon Digital Camera Solution

Disk. This is useful for downloading images to a computer in which the software is not installed.

However, please note that there are certain limitations to downloading images with this method. For more details, please refer to the For

Windows

®

XP and Mac OS X Users leaflet.

1

Use the supplied interface cable to connect the computer's USB port to the camera's DIGITAL terminal.

z See steps 2 to 4 on pages 106 and 107.

2

Follow the onscreen instructions to proceed with downloading.

Various Functions

Downloading Directly from a CF card

1

Eject the CF card from the camera and insert it into a CF card reader connected to the computer.

z If you are using a PC card reader or a PC card slot, first insert the CF card into a PC card adapter (sold separately) and then insert the loaded adapter into the slot.

z Refer to your card adapter’s or card reader’s manual for information regarding the connection between the computer and card adapter or card reader.

111

Various Functions

2

Double-click the icon of the drive with the CF card. z Depending on the operating system, a window opens automatically.

3

Copy images from the card into a folder of your choice on the hard disk.

z The images are stored in the [xxx CANON] folders located in the [DCIM] folder (where xxx is a three-digit number from 100 to 998

(p. 114)).

Viewing Images on a TV Set

AV cable AVC-DC300 can be used to view images as you shoot or play them back.

1

Turn off the camera (p. 25).

z Turn off the television also.

2

Attach the AV Cable to the terminal on the camera.

112

3

Plug the other ends of the AV cable to the video in and audio in jacks on the TV.

Yellow Plug to the Video In Jack

Black Plug to the Audio In Jack

4

Turn on the TV and switch it to

Video mode.

5

Turn on the camera (p. 25).

z The image will appear on the TV. Shoot or playback images as usual.

z If the images are not appearing on the TV when shooting, press the DISP. button.

Various Functions z No image will appear on the LCD monitor when the camera is connected to a TV monitor.

z If the TV is a stereo model, you can plug the audio plug into either the left or right

Audio In jack. Please refer to the TV’s manual for details.

z A TV set cannot be used in mode.

z The video output signal can be switched

(NTSC or PAL) to accommodate different regional standards (p. 71). The default setting varies between regions.

- NTSC:Japan, U.S.A., Canada, Taiwan, etc.

- PAL: Europe, Asia (excluding

Taiwan), Oceania, etc.

If the video system is set incorrectly, the camera output may not display properly.

113

Various Functions

Resetting the File Number

Select the set up method for the file number.

On

Off

The camera resets the file number to

100-0001 each time you insert a new

(unused) CF card. If you insert a card that already contains some images, numbering resumes from the next available number.

The camera remembers the last file number, and starts numbering from the next number when you insert a new CF card.

1

In the [ (Set up)] menu, select

(File No. Reset).

z See Selecting Menus

and Settings (p. 65).

2

Press or to select [On] or

[Off].

3

Press the MENU button.

114

Setting the File No. Reset to [Off] is useful for avoiding file name duplication when images are downloaded to a computer.

About File and Folder Numbers

Images are assigned file numbers from

0001 to 9900, and folders are assigned folder numbers from 100 to 998 (Folder numbers cannot contain 99 in the last two digits).

Folder numbers cannot contain

99 in the last two digits.

Folder File Capacity

Each folder usually contains up to 100 images. However, since images shot in

Continuous Shooting or Stitch Assist mode are always saved into the same folder, a folder may contain more than 100 images.

The number of images may also exceed

100 if a folder contains images copied from a computer or images shot with other cameras. Please note, however, that the images in folders containing 2001 or more images cannot be played back in this camera.

Various Functions

Customizing the Camera

(My Camera Settings)

My Camera allows you to customize the start-up image and start-up, shutter, operation and self-timer sounds. Each menu item has three choices.

Example: Start-up image

As default settings, My Camera setting has a science fiction theme and My Camera setting has an animal theme.

Changing My Camera Settings

1

Press the MENU button.

z The [ (Rec.)] or [

(Play)] menu appears.

115

Various Functions

2

Select [ (My

Camera)] using or

and select a menu item using or .

3

Select the contents you wish to set using or .

4

Press the MENU button.

z Pressing the button closes the menu and makes the settings take effect.

z In Shooting mode, the menu can be closed by pressing the shutter button halfway.

z If you select [Theme] in Step 3, you can select a consistent theme for each of the

My Camera settings. z If [Mute] in the [ (Set up)] menu is set to

[On], the beep does not sound even if each sound item such as [Start-up

Sound], [Operation Sound], [Self-timer

Sound] or [Shutter Sound] in the [ (My

Camera)] menu is set to [ , ,

(On)] (p. 68). The error warning signal beeps even if [Mute] is set to [On].

116

Registering My Camera Settings

Images recorded onto the CF card and newly recorded sounds can be added as My

Camera settings to the and menu items. You can also use the supplied software to upload your computer’s images and sounds to the camera.

The following menu items can be saved to the camera.

z

Start-up Image

z

Start-up Sound

z

Operation Sound

z

Self-timer Sound

z

Shutter Sound

Registering the CF Card Images and

Sounds

1

Press the ON/OFF button to turn the camera on (p. 25) and set the mode switch to .

z The camera powers into Playback mode.

2

Press the MENU button.

z The [ (Play)] menu appears.

3

Select [ (My Camera)] using and select the menu item you wish to register using or .

Various Functions

5

Press the DISP. button.

z An image appears.

Start-up Image: Go to step 6a , 7a

Start-up Sound, Shutter Sound, Operation Sound, and Self-Timer Sound: Go to step 6b , 7b

6a

Select the image you wish to

7a

Press the SET button.

6b

Select (Record) using or

and press the SET button.

4

Select z appears.

117

Various Functions z Recording starts.

z Recording stops when the time is exceeded.

• Start-up Sound: 1 second

• Operation Sound: 0.3 seconds

• Self-timer Sound: 2 seconds

• Shutter Sound: 0.3 seconds

7b

Select (Register) using or

.

8

Select [OK] using or and press the SET button.

z Sounds recorded using the Sound

Memo function and movies cannot be registered as My Camera settings (p. 55,

92).

z When you register new My Camera settings, the previously registered settings are erased.

File Format of My Camera Settings

My Camera settings should conform to the below file formats. However, CF card images shot with this camera can be registered as

My Camera settings regardless of the below formats.

z Start-up Image

• Recording Format

• Sampling Rate

• Image Size

• File Capacity

JPEG (baseline JPEG)

4:2:0 or 4:2:2

320 x 240 pixels

20 KB or less z Start-up, Operation, Self-timer and Shutter

Sounds

• Recording Format

• Quantization Bits

WAVE (monaural)

8 bit

• Sampling Frequency 11.025 kHz or

8.000 kHz

118

• Recording Time

11.025 kHz 8.000 kHz

Start-up Sound 1.0 sec. or less 1.3 sec. or less

Operation Sound 0.3 sec. or less 0.4 sec. or less

Self-timer Sound 2.0 sec. or less 2.0 sec. or less

Shutter Sound 0.3 sec. or less 0.4 sec. or less

Any file formats other than those described above cannot be used with this camera.

An example of this function is to record “Say

Cheese”, as the self-timer sound so the camera will play back this sound 2 seconds before the photo is taken. You could also record cheerful music to bring out the natural smiles of your subjects, or so they can strike a pose fitting the music. In these ways you can customize your camera by creating and adding new My Camera settings.

See the supplied Software Starter Guide for more information on creating and adding to the My

Camera Settings files.

Various Functions

119

List of Messages

The following table explains each of the messages that may appear on the LCD monitor.

z

For messages which may appear when a printer is connected, refer to the Direct Print User

Guide.

Busy...

No memory card

Cannot record

Memory card error

Memory card full

Naming error

Change the batteries

No image

Image too large

Incompatible JPEG format

The camera is recording image data to the CF card.

The playback mode is running.

You attempted to shoot or play back with no CF card installed.

You attempted to shoot with no CF card installed.

There is something wrong with the CF card.

CF card is too full to accommodate more images or print settings.

The camera cannot generate a file name for the image you have shot because the card already contains a folder having the same name as the file to be created, or the file number has already reached the maximum possible value.

Display the Play menu and set [File Number Reset] to [On]. Save all images you wish to keep into your computer, and reformat the CF card. Please note that formatting will erase all data in the card.

Battery charge is insufficient to operate the camera. Replace all batteries at the same time with new AA-size alkaline batteries (p. 17) or fully recharged

Canon NiMH batteries.

No images recorded on CF card.

You attempted to play back an image whose resolution exceeded 4064 x

3048 pixels or whose file size was too large.

You attempted to play back an incompatible JPEG file.

120

Corrupted data

RAW

Unidentified image

Cannot magnify

Cannot rotate

Incompatible WAVE format

Cannot register this image

Protected

Too many marks

Unselectable image

Exx

List of Messages

You attempted to play back an image with corrupted data.

You attempted to play back an image recorded in the RAW format.

You attempted to play back an image that was recorded in a special format

(proprietary format used by the camera of another manufacturer) or a movie that was taken with another camera.

You attempted to magnify an image recorded by another camera, or recorded in a format that cannot be magnified, or edited on a computer or a movie clip.

You attempted to rotate an image recorded by another camera, or recorded in a format that cannot be rotated, or edited on a computer or a movie clip.

Cannot attach sound memo to the image because the image has some sound file recorded in an inappropriate format.

You attempted to register an image recorded with another camera or a movie clip as a start-up image.

You attempted to erase a protected image or movie clip.

Too many images have been marked for printing, transferring, or auto playing. Cannot process any more.

You attempted to set the print settings for a non-JPEG file.

Camera malfunctioned. Turn off the power and turn on again, then re-shoot or play back. If the same message recurs frequently, the camera may be damaged. Note down the error number [xx] and take the camera to a

Customer Support Help Desk. If this message appears immediately after you have taken a shot, the camera may not have shot the image. Switch to the Playback mode and check whether the image was actually recorded.

121

Troubleshooting

Problem

The camera doesn't function.

The camera doesn't shoot.

Cause

The camera is turned off.

The CF card slot cover or the battery cover is open.

Batteries are loaded in the wrong direction.

Batteries are depleted.

Solution z Press the ON/OFF button for a few moments.

z Be sure the cover is closed securely.

z Reload the batteries in the correct direction.

Batteries are not the right type.

Batteries are not making good electrical contact with the camera.

Camera is in Playback mode.

The flash is charging.

The CF card is full.

z Replace with unused alkaline or fully recharged batteries (four AA-size batteries) z Use a household power source.

z Use only unused AA-size alkaline batteries or

Canon AA-size NiMH batteries. (For information about alkaline batteries, see

Proper Battery Handling (p. 18).) z Wipe the battery terminals with a clean dry cloth.

z Change to the Shooting mode.

z Wait until the flash charges. You can press the shutter button when the indicator next to the viewfinder lights a steady orange.

z Insert a new CF card.

z Download images to your computer, then erase them from the card to free up more space.

122

Troubleshooting

Problem

The camera doesn't shoot.

Cannot play back

Lens will not retract

The batteries are consumed quickly.

The CF card is not formatted correctly.

Cause

You attempted to play back images shot with another camera or images edited at a computer.

File name was changed with a computer or file location was changed.

Battery cover or CF card slot cover opened with camera on.

Battery cover or CF card slot cover opened while camera was recording to CF card (warning signal sounds).

Batteries are not the right type.

Solution z Format the CF card. (p. 21).

z The card may be defective (its logical may be corrupted). Contact the nearest Canon

Customer Help Desk.

z Computer images that cannot be played back will playback if they are added to the camera using the bundled software program

ZoomBrowser EX or ImageBrowser. See the

ZoomBrowser EX/ImageBrowser User Guide

(PDF).

z Set the file name or location to the file format/ structure of the camera (See About File and

Folder Numbers (p. 114)).

z Close the CF card slot cover or battery cover, then turn off the camera.

z Close the covers, and then use the ON/OFF button to turn the power off correctly.

z Use only unused AA-size alkaline batteries or

Canon AA-size NiMH batteries. (For information about alkaline batteries, see

Proper Battery Handling (p. 18).)

123

Troubleshooting

Problem

The batteries are consumed quickly.

If using rechargeable batteries: Batteries do not charge in separately sold battery charger.

Cause

Battery capacity drops due to low ambient temperatures.

Battery terminals are dirty.

The batteries have not been used for over a year.

Battery life exceeded.

Batteries were placed in the charger in the wrong direction.

Poor electrical contact, between batteries and the charger.

Battery terminals are dirty.

Battery life exceeded.

Shots are blurry or unfocused.

The camera was moving when you took the shot.

Autofocus function hampered by obstruction to AF-assist beam.

The AF-assist beam settings are set to [Off].

Solution z If shooting in a cold area, keep the batteries warm (by placing them in an inner pocket, etc.) until ready to use them.

z Wipe them well with a dry cloth before use.

z Performance should return to normal after several charging cycles.

z Replace all 4 batteries with new ones.

z Put batteries back into the charger in the correct direction.

z Be sure to set batteries firmly into the charger.

z Be sure that the power cord is firmly connected to the charger, and is firmly plugged in to the power outlet.

z Wipe them well with a dry cloth before charging.

z Replace all 4 batteries with new ones.

z Hold the camera steady when shooting.

z Be careful not to block the AF-assist beam flash part with a finger or other object.

z Turn the [AF-assist beam] setting [On] (p. 67).

124

Troubleshooting

Problem

Shots are blurry or unfocused.

Cause

Subject out of focal range.

Subject is hard to focus on.

The subject comes out underexposed

(too dark).

Insufficient light for shooting.

The subject is darker than the surroundings.

Solution z Ensure that there is at least 46 cm (1.5 ft.) between the camera lens and subject.

z When shooting subjects within the 5 to 46 cm

(2.2 in. – 1.5 ft.) wide angle range or the 26 to

46 cm (10 in. – 1.5 ft.) telephoto range, use

Macro mode.

z Use the focus lock or the manual focus to shoot the image. (See Shooting Problem

Subjects for the Autofocus (p. 87)) z Set the flash on.

z Set exposure compensation to a positive value or use the spot metering function.

The subject comes out overexposed

(too bright).

Subject too far for flash to reach.

z When the flash is used, the distance between lens and subject should not exceed 4.2 m

(14 ft.) at wide angle and 2.5 m (8.2 ft.) at telephoto. Raise the ISO sensitivity and then shoot. (See Changing the ISO Speed (p. 84))

The subject is too close to the flash.

The subject is brighter than the surroundings.

z When the flash is used, the distance between lens and subject should be no less than 26 cm

(10 in.).

z Set exposure compensation to a negative value.

125

Troubleshooting

Problem

The subject comes out overexposed

(too bright).

Cause

Light is shining or reflecting into the camera.

The flash mode is set so that the flash always fire.

A vertical bar of light (red, purple) appears on the

LCD monitor.

White dots or white asterisks appear on the image.

The flash doesn't fire.

Solution z Adjust the camera angle.

z Set the flash to any other mode except on.

The subject is too bright.

Light from the flash has reflected off dust particles or insects in the air. This occurs more frequently in the following conditions:

- When shooting at the wide angle end.

- When shooting with a high aperture value in the aperturepriority AE mode.

The flash mode is set to flash off mode.

z This is a normal occurrence in devices containing CCDs and does not constitute a malfunction. (This red bar of light will not be recorded when shooting still photos, but it will be recorded when shooting movies.) z This is a phenomenon that occurs with digital cameras and does not constitute a malfunction.

z Set the flash mode to any other mode except

Off.

126

Troubleshooting

Problem

Image not showing on TV.

Cause

Incorrect video system setting.

The mode dial is turned to

(Stitch Assist).

Zoom does not operate.

Reading images from CF card is slow.

Recording images to CF card takes a long time.

Zoom lever was pressed while shooting in Movie mode.

CF card was formatted in another device.

Solution z Set the video system to the appropriate setting, NTSC or PAL, for your TV.

z Turn the mode dial to any mode other than .

z Operate the zoom before shooting in Movie mode.

z Use a CF card formatted in your camera. See

Formatting a CF Card (p. 21).

127

Appendix

Using the Power Kits (Sold Separately)

Using Rechargeable Batteries

(Battery and Charger Kit CBK4-200)

Included are the battery charger and four rechargeable AA-size NiMH (nickel metal hydride) batteries. Charge batteries as shown below.

To a power outlet

Indicator

The indicator blinks while charging, then lights steadily when charging is finished.

z This charger can be used only to charge

Canon AA-size NiMH NB-2AH batteries.

Please do not attempt to charge any other type of batteries with this charger.

z Never mix new batteries together with batteries that have been used in other devices.

128 z When recharging batteries from the camera, always recharge all four of them at the same time.

z All batteries you place in the charger should be at approximately the same charge state, and should have been purchased at the same time. Don't mix batteries with different purchase dates or different charge states. z Do not attempt to recharge fully charged batteries, as doing so may reduce or impair battery performance. Also, do not charge batteries for more than 24 consecutive hours.

z Do not recharge batteries in enclosed areas that tend to retain heat.

z Repeatedly recharging batteries before they become fully depleted may cause batteries to lose capacity. Do not recharge the batteries until the LCD monitor displays the “Change the batteries” message.

z Wipe the battery terminals well with a dry cloth in the following situations, as the terminals may be soiled with oil from one’s skin or other dirt:

- If the battery usage time has considerably diminished

- If the number of recordable images has considerably diminished

- When charging the batteries (insert and remove the batteries two or three times before charging)

- When charging completes in a matter of a few minutes (the battery charger indicator remains lit) z You may not be able to fully charge the batteries due to their specifications right after purchase or after long periods of non-use. If this happens, use the batteries until their charge is depleted before charging them again. After doing this several times, battery performance will be restored.

z Since storing fully charged batteries for long periods of time (about 1 year) can shorten their lifecycle or affect performance, you are recommended to use the batteries in the camera until they are completely discharged and to store them at normal temperature (23 °C/73 °F) or less. If you do not use the batteries for

Appendix long periods of time, charge them fully and discharge them fully in the camera at least once a year before returning them to storage.

z If battery usage time is considerably low despite their terminals being wiped and the battery charger's indicator remaining lit, it is possible that the batteries have reached the end of their lifespan. Switch to different, unused batteries. If you are purchasing new batteries, look for

Canon’s AA-size NiMH batteries (four piece set).

z Leaving batteries in the camera or charger may damage it causing battery leakage. Remove batteries from the camera or charger and store in a dry cool location when not in use.

z It takes approximately 250 minutes for the charger to fully recharge the batteries (as determined by testing at

Canon facilities). Please do not charge batteries in areas where the temperature is outside the range of 0 to 35°C (32 to

95°F).

129

Appendix z Charging time varies according to ambient temperature and to the batteries' initial charge state.

z The battery charger may emit noise while charging. This is not a malfunction.

z Battery/Charger Kit CBK100 can also be used. Use Canon AA-size batteries

NB-1AH with the CBK100 charger.

Using the AC Adapter Kit ACK600

Use of AC Adapter Kit ACK600 (sold separately) is recommended when using the camera continuously for prolonged periods of time and when connecting to a computer.

Be sure that the camera is turned off before connecting or disconnecting the compact power adapter.

1

Connect the power cord to the compact power adapter, and then plug the other end into the power outlet.

130

2

Open the terminal cover, and connect the compact power adapter's DC plug into the camera's DC IN terminal.

z Please unplug the adapter from the power outlet when you have finished using the camera.

Please do not attempt to use any AC adapter other than AC Adapter Kit ACK600 with your camera. Use of a different adapter may result in damage to the camera or to the adapter kit.

Appendix

Using the Lenses (Sold Separately)

The camera supports use of the separately sold

Wide Converter WC-DC52, Tele-converter

TC-DC52 and Close-up Lens 250D (52 mm). In order to attach any of these lenses, you also need to use the separately sold Conversion Lens

Adapter LA-DC52C.

z When attaching the wide converter, teleconverter or close-up lens, be sure to screw it on securely. If they come loose they may fall from the lens adapter, posing risk of injury from shattered glass.

z Never look into the sun or into strong light through the wide converter, tele-converter or the close-up lens, as this can result in blindness or impairment of vision.

z If you use the flash when shooting with the wide converter, the outer area of the recorded image (especially lower right corner) will come out relatively dark.

z When using the tele-converter, please set the focal length to the telephoto end. At other zoom settings, the image will appear as if its corners have been cut off.

131

Appendix z When using the wide converter, please set the camera to the wide angle end.

z The wide converter blocks part of the view through the viewfinder.

It is not possible to attach a lens hood or filter to the wide converter or teleconverter.

Wide Converter WC-DC52

Use this converter for taking wide-angle shots. The wide converter changes the focal length of the camera body’s lens by a factor of 0.7 (the thread diameter is 52 mm.).

Tele-converter TC-DC52

This 52 mm-threaded diameter magnifying conversion lens is for taking telephoto shots. The lens changes the focal length of the camera body’s lens by a factor of 2.4.

Close-Up Lens 250D (52 mm)

This lens makes it easy to take macro shots. With the camera set to Macro mode, you can use this option to shoot subjects that are 3 to 25 cm (1.2 to

9.8 in.) away from the front of the lens (or 13 to 25 cm (5.1 to 9.8 in.) at the telephoto end).

132

Shooting Ranges in Macro Mode

Telephoto

End

Wide Angle

End

Distance between Front of the Lens and

Subject

Field Coverage

13 cm (5.1 in.) 48 × 36 mm (1.9 × 1.4 in.)

25 cm (9.8 in.) 82 × 61 mm (3.2 × 2.4 in.)

3 cm (1.2 in.) 49 × 37 mm (1.9 × 1.5 in.)

25 cm (9.8 in.) 230 × 173 mm (9.1 × 6.8 in.)

Conversion Lens Adapter LA-DC52C

This separately sold adapter is required for attaching the wide converter, tele-converter and close-up lens (52 mm thread diameter).

Attaching a Lens

1

Be sure that the camera is turned off.

2

Press the ring release button and hold it down, and turn the ring in the direction of the arrow.

Ring Release Button a b

Ring

3

When the mark on the ring and the z mark on the camera are aligned, lift off the ring.

Appendix

4

Align the z mark on the conversion lens adapter with the

mark on the camera, and turn the adapter in the direction of the arrows as far as the mark on the camera.

5

Set the lens on the adapter, and attach it securely by turning it in the indicated direction.

133

Appendix z Completely remove all dust and dirt from conversion lenses with a lens blower brush before use. The camera may focus on any dirt that remains.

z Exercise due caution when handling the lenses since it is easy to dirty them with finger prints.

z Be careful not to drop the camera or adapter when removing the ring.

z When shooting with these attachments, please use the LCD monitor to compose your shots. The attachments block part of the view through the viewfinder, and the area shown in the viewfinder does not match the area of the shot that is actually recorded. Also, the angle of view cannot be confirmed in the viewfinder.

z You should not shoot images in mode when using these attachments.

Although it is possible to select this mode at the camera, the PhotoStitch software will not be able to stitch the images together at the computer.

Camera Care and Maintenance

Use the following procedures to clean the camera body, lens, viewfinder, LCD monitor and other parts.

Camera

Body

Lens

: Wipe the camera body with a soft cloth or eyeglass lens wiper.

: First use a lens blower brush to remove dust and dirt, then remove any remaining dirt wiping the lens lightly with a soft cloth.

z Never use synthetic cleaners on the camera body or lens. If dirt remains, contact the closest Canon Customer

Support Help Desk as listed on the separate Canon Customer

Support leaflet.

134

LCD Monitor,

Viewfinder

: Use a lens blower brush to remove dust and dirt. If necessary gently wipe the viewfinder and

LCD monitor with a soft cloth or an eyeglass lens wiper to remove stubborn dirt.

z Never rub or press forcefully on the LCD monitor. These actions may damage it or lead to other problems.

Never use water, paint thinner, benzene, or detergents to clean the camera, as these may cause damage or deformation.

Appendix

135

Specifications

All data is based on Canon’s standard testing methods. Subject to change without notice.

Camera Effective Pixels Approx. 3.2 million

Image Sensor

Lens

1/2.7-inch CCD (Total number of pixels: Approx. 3.3 million)

5.4 (W) – 16.2 (T) mm (35 mm film equivalent: 35 (W) – 105 (T) mm) f/2.8 (W) – f4.8 (T)

Approx. 3.2x (Up to approx. 10x in combination with the optical zoom) Digital Zoom

Optical Viewfinder

LCD Monitor

AF System

Shooting Distance

(from the front of the lens)

Shutter

Shutter Speeds

Light Metering System

Real-image zoom viewfinder

1.8-inch TFT color LCD, approx. 118,000 pixels

TTL autofocus

Focus lock available

Focusing frame: 9-point AiAF/1-point AF (Fixed to center)

Normal: 46 cm (18.1 in.) – infinity

Macro: 5 – 46 cm (2.0 in. – 1.5 ft.) (W) / 26 – 46 cm (10 in. – 1.5 ft.) (T)

Manual Focus: 5 cm (2.0 in.) – infinity (W) / 26 cm (10 in.) – infinity (T)

Mechanical shutter + electronic shutter

15 – 1/2000 sec.

z 15 – 1.3 sec. or slower shutter speeds are available in Shutter-priority mode or Manual mode.

z Slow shutter speeds of 1.3 sec. or slower operate with noise reduction.

Evaluative, Center-weighted average or Spot

(W): Wide angle (T): Telephoto

136

Specifications

Exposure Control System Program AE/Shutter-priority AE/Aperture-priority AE/Manual exposure control

Exposure Compensation ± 2 stops in 1/3-stop increments

Sensitivity Auto, ISO 50/100/200/400 equivalent

White Balance

Built-in Flash

Flash Range

Auto, pre-set (available settings: Daylight, Cloudy, Tungsten, Fluorescent,

Fluorescent H) or custom

Auto*, on*, off, Slow synchro

* Red-eye reduction available

Normal: 46 cm – 4.2 m (18 in. – 14 ft.) (W), 46 cm – 2.5 m (18 in. – 8.2 ft.) (T)

Macro: 26 – 46 cm (10 in. – 1.5 ft.) (W/T) (ISO speed set to Auto)

Shooting Modes

Continuous Shooting

Self-timer

PC-controlled Shooting

Recording Media

File Format

Image Recording Format

Auto

Creative zone: Program, Shutter-speed priority, Aperture priority, Manual

Image zone: Portrait, Landscape, Night scene, Fast shutter, Slow shutter,

Special Scene (Foliage, Snow, Beach, Fireworks, Underwater and Indoor),

Stitch assist and Movie

Approx. 2.2 shots/sec.

(Large/Fine mode, LCD monitor off)

Activates shutter after an approx. 10-sec./approx. 2-sec. delay

Available (USB connection only. Exclusive software program is included in the camera kit.)

CompactFlash

TM

(CF) card (Type I)

Design rule for Camera File System and DPOF compliant

Still images: JPEG (Exif 2.2)*

1

,

Movies: AVI (Image data: Motion JPEG; Audio data: WAVE (monaural))

137

Specifications

Compression

Number of

Recording Pixels

Playback Modes

Direct Print

Display Languages

My Camera Settings

Interface

Superfine, Fine, Normal

Still

Images

Large : 2048 x 1536 pixels Medium 1: 1600 x 1200 pixels

Medium 2: 1024 x 768 pixels Small : 640 x 480 pixels

Movies 640 x 480 pixels (Approx. 30 sec.)*

2

160 x 120 pixels (Approx. 3 min.)

320 x 240 pixels (Approx. 3 min.)

Approx. 15 frames/sec. (The data in parentheses refer to the maximum movie length per shooting.)

Single (histogram displayable), Index (9 thumbnail images), Magnified

(approx. 10x (max.) in LCD monitor), Auto play or Sound memos (up to 60 sec.).

Canon Direct Print/Bubble Jet Direct/PictBridge compatible

12 languages available for menus and messages (English, German, French,

Dutch, Danish, Finnish, Italian, Norwegian, Swedish, Spanish, Chinese and

Japanese)

The start-up image, start-up sound, shutter sound, operation sound and self-timer sound can be customized using the following methods:

1. Using the images and sounds recorded on a camera.

2. Downloading data from your computer using the supplied software.

Universal Serial Bus (mini-B, PTP [Picture Transfer Protocol])

Audio/Video output (NTSC or PAL selectable, monaural audio)

Power Source

AA-size alkaline batteries (included in the camera kit)

AA-size rechargeable NiMH batteries (sold separately)

AC Adapter Kit ACK600 (sold separately)

Operating Temperatures 0 – 40 °C (32 – 104 °F)

138

Specifications

Operating Humidity

Dimensions

Weight

10 – 90%

101.0 x 64.0 x 31.5 mm (4.0 x 2.5 x 1.2 in.) (excluding protrusions)

Approx. 200 g (7.1 oz.) (camera body only)

*

1

*

2

This digital camera supports Exif 2.2 (also called "Exif Print"). Exif Print is a standard for enhancing the communication between digital cameras and printers. By connecting to an Exif Print-compliant printer, the camera's image data at the time of shooting is used and optimized, yielding extremely high quality prints.

Recording time obtained when using the FC-32MH CF card (included with the camera) or the separately sold

FC-256MH or FC-512MSH CF card (not sold in some regions).

139

Specifications

Battery Performance

Number of Shots

LCD

Monitor

On

LCD

Monitor

Off

AA Alkaline Batteries

(included with the camera)

AA NiMH Battery

(NB-2AH)

Approx.

250 shots

Approx.

800 shots

Approx.

500 shots

Approx.

1200 shots

Playback

Time

Approx.

280 min.

Approx.

360 min.

*The data above reflects standard Canon testing conditions. The actual figures will vary according to the shooting conditions and settings.

<Test Conditions>

Shooting:Normal temperature (23 °C /73 °F), alternating wide angle end and telephoto end shots at 20-second intervals with flash fired once every four shots and camera power turned off and on every eighth shot.

Playback: Normal temperature (23 °C /73 °F), continuous playback at 3 seconds per image.

z For information on handling batteries, see

Proper Battery Handling

(p. 18).

140

CF Cards and Estimated Capacities

(Recordable Images)

L

M1

M2

S

Movie

FC-

32MH

18

CF card included with the camera

FC-64M

38

FC-

128M

76

FC-

256MH

154

FC-

512MSH

308

33

67

68

136

137

274

276

548

552

1095

30

54

108

53

61

109

217

107

122

219

435

215

246

440

868

431

491

879

1734

855

94

174

120

196

189

349

241

393

379

700

482

788

762

1390

962

1563

1522

2714

1891

3122

337 676 1355 2720 5203

30 sec. 61 sec. 124 sec. 249 sec. 499 sec.

91 sec. 183 sec. 368 sec. 735 sec. 1451 sec.

242 sec. 486 sec. 973 sec. 1954 sec. 3902 sec.

Specifications zSome CF cards are not sold in some regions.

zThe maximum movie clip length is approximately

30 sec. ( )* or 3 min. ( , ). The times shown are the maximum continuous recording times.

* When using the FC-32MH CF card (included), the separately sold FC-256MH or FC-512MSH

CF card (not sold in some regions).

z (Superfine), (Fine) indicate the compression setting.

zL (Large), M1 (Medium 1), M2 (Medium 2), S

(Small), , and show resolution rates.

L (Large)

M1 (Medium 1)

M2 (Medium 2)

S (Small)

2048 x 1536 pixels

1600 x 1200 pixels

1024 x 768 pixels

640 x 480 pixels

640 x 480 pixels

320 x 240 pixels

160 x 120 pixels

Image File Size (Estimated)

L

(2048 x 1536 pixels)

M1

(1600 x 1200 pixels)

M2

(1024 x 768 pixels)

S

(640 x 480 pixels)

1602 KB 893 KB 445 KB

1002 KB 558 KB 278 KB

570 KB

249 KB

320 KB

150 KB

170 KB

84 KB

990 KB/sec.

(640 x 480 pixels)

Movie

(320 x 240 pixels)

(160 x 120 pixels)

330 KB/sec.

120 KB/sec.

141

Specifications

NiMH Battery NB-2AH

Supplied with the separately sold NiMH Battery

NB4-200 set and the Battery/Charger Kit CBK4-200.

Type

Rechargeable nickel metal hydride battery

Nominal

Voltage

Typical

Capacity

Cycle Life

Operating

Temperatures

1.2 V DC

2300 mAh (min.: 2150 mAh)

Approx. 300 times

0 – 35 °C (32 – 95 °F)

Dimensions

Weight

Diameter: 14.5 mm (0.6 in.)

Length: 50 mm (2.0 in.)

Approx. 29 g (1.0 oz.)

Battery Charger CB-4AH/CB-4AHE

Supplied with the optional Battery and Charger Kit

CBK4-200.

Rated Input

Charging

Time

100 – 240 V AC (50/60 Hz),

CB-4AH: 16 – 21 VA

CB-4AHE: 9.13 – 0.08 A

Rated Output 565 mA *

1

, 1275 mA *

2

Approx. 250 min.

*

1

, approx. 110 min.

*

2

142

Operating

Temperatures

0 – 35 °C (32 – 95 °F)

Dimensions

65.0 × 105.0 × 27.5 mm

(2.6 × 4.1 × 1.1 in.)

Weight Approx. 95 g (3.4 oz.) (body only)

*1

*2

To charge four NB-2AH NiMH batteries

To charge two NB-2AH NiMH batteries loaded one at each end of the battery charger

Compact Power Adapter CA-PS500

(Supplied with the separately sold AC Adapter Kit

ACK600.)

Rated Input

100 – 240 V AC (50/60 Hz),

16 VA (100V) – 26 VA (240V)

Rated Output 4.3 V DC/1.5 A

Operating

Temperatures

0 – 40 °C (32 – 104 °F)

Dimensions

Weight

42.5 × 104.4 × 31.4 mm

(1.7 × 4.1 × 1.2 in.)

Approx. 180 g (6.3 oz.) (body only)

CompactFlash

TM

Card

Card slot type Type 1

Dimensions

Weight

36.4 × 42.8 × 3.3 mm

(1.4 × 1.7 × 0.1 in.)

Approx. 10 g (0.4 oz.)

Wide Converter WC-DC52 (Sold Separately)

Magnification

Focusing Range

(from front of lens)

Thread

Diameter

Dimensions

Weight

Approx. 0.7x (35 mm film equivalent at wide angle end: approx. 24.5 mm)

Approx. 2 mm (0.08 in.) – infinity

(wide angle end and Macro mode)

52 mm standard filter thread

(Conversion Lens Adapter

LA-DC52C is required.)

Diameter: 55.7 mm (2.2 in.)

Length: 23.7 mm (0.9 in.)

Approx. 74 g (2.6 oz.)

Close-up Lens 250D 52 mm (Sold

Separately)

Focal Length 250 mm

Focusing Range

(from front of lens)

4 – 25 cm (1.6 – 9.8 in.) (W)

13 – 25 cm (5.1 – 9.8 in.) (T)

Thread

Diameter

Dimensions

52 mm standard filter thread

(Conversion Lens Adapter

LA-DC52C is required)

Diameter: 54 mm (2.1 in.)

Length: 10.2 mm (0.4 in.)

Weight Approx. 55 g (1.9 oz.)

Specifications

Tele-converter TC-DC52 (Sold Separately)

Magnification

Focusing Range

(from front of lens)

Thread

Diameter

Dimensions

Weight

Approx. 2.4x (35 mm film equivalent at telephoto end: approx. 252 mm)

Approx. 1.3 m (Approx. 4.3 ft.) – infinity

(at telephoto end)

52 mm standard filter thread

(Conversion Lens Adapter

LA-DC52C is required)

Diameter: 67 mm (2.6 in.)

Length: 57 mm (2.2 in.)

Approx. 74 g (2.6 oz.)

Conversion Lens Adapter LA-DC52C

(Sold Separately)

Thread

Diameter

52 mm standard filter thread

Dimensions

Weight

Diameter: 55.6 mm (2.2 in.)

Length: 28.7 mm (1.1 in.)

Approx. 11 g (0.39 oz.)

143

Photo Tips and Information

This section offers photography tips.

z Tip for Using the Self-timer (p. 45)

Normally, the camera shakes a little when you press the shutter button.

Setting the self-timer to delays the shutter release for two seconds and allows the camera to stop shaking, thus preventing a blurred image.

Even better results can be obtained by placing the camera on a fixed, stable surface or by fixing the camera onto a tripod.

z To Shoot a Night Scene without a Subject (p. 42)

To shot a night scene without any subject in the foreground, set the flash to .

(A night scene usually consists of light sources in the night. When shooting with the flash, the light of the flash will washout these lights, so it is better to turn the flash off.)

This mode uses a slow shutter speed so always use a tripod to prevent camera shake.

z Advanced Technique for the Macro Mode (p. 44)

Macro mode can make unique images when used with the zoom function. For example, shooting a flower at maximum wide angle in

Macro mode allows the camera to bring both the flower and the background into focus. However, shooting at maximum telephoto can throw the background out of focus to make the flower stand out.

144

Macro with the wide angle zoom

Macro with the telephoto zoom z How to Adjust the Exposure (p. 80)

This camera automatically adjusts the exposure to shoot images with the optimal brightness.

However, recorded images may sometimes be brighter or darker than the actual image depending on the shooting conditions. If this happens, adjust the exposure compensation manually.

Underexposure

The whole recorded image is dark, which makes white elements of the image appear gray. Shooting bright subjects or in backlit conditions may cause the image to be underexposed. Adjust the exposure compensation towards the + end.

Optimal Exposure

Overexposure

The whole recorded image is bright, which makes black elements of the image appear gray. Shooting dark subjects or in dark places may cause the image to be overexposed. Adjust the exposure compensation towards the - end.

Photo Tips and Information z ISO Speed (p. 84)

The ISO speed is the numeric representation of the camera’s sensitivity to light. The higher the

ISO speed, the higher the sensitivity. A high ISO speed allows you to shoot images in dark indoor or outdoor conditions without a flash and also helps prevent blurred images due to camera shake. This is convenient when shooting images in places where flash photography is prohibited.

The ISO speed setting makes full use of the available light, resulting in images that convey the feel of the place they were shot.

ISO 50 equivalent ISO 400 equivalent

145

Index

A

AC Adapter Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130

AF Frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Aperture-Priority AE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Aperture Value . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Auto Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Auto Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

A/V Out Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

B

Batteries

Battery Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Handling Precautions . . . . . . . . . . . . . . . . . . . . . . . . 18

Installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Low Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140

Rechargeable Batteries . . . . . . . . . . . . . . . . . . . . . 128

Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Beep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 68, 72, 116

Black and White Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 85

C

Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134

CF Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

CF Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Downloading Images . . . . . . . . . . . . . . . . . . . . . . . 104

Formatting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

146

Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Recording Capacity . . . . . . . . . . . . . . . . . . . . . . . . 140

Slot Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

CompactFlash™ Card . . . . . . . . . . . . . . . . . . . . . 137, 142

Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Compression . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Continuous Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Creative Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

D

Date/Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 - 72

Digital Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 106

Digital Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Direct Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

Display Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 - 32

Detailed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 29

Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 29

DPOF

Print Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Transfer Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

E

Erasing

All Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Displayed Images . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Single Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Exposure

Aperture-Priority AE . . . . . . . . . . . . . . . . . . . . . . . . . 76

Compensation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Shutter Speed-Priority AE. . . . . . . . . . . . . . . . . . . . . 75

White Balance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

F

Fast Shutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

File No. Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70, 114

File Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70, 114

Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Focal Length . . . . . . . . . . . . . . . . . . . . . 39, 131, 132, 143

Focus

Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

H

Household Power Source . . . . . . . . . . . . . . . . . . . . . . 130

I

Image Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Index Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Information View . . . . . . . . . . . . . . . . . . . . . . . . . . .28 - 32

Interface

Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 106

ISO Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Index

J

Jump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

L

Landscape Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

LCD Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 - 32

Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Close-up Lens. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132

Conversion Lens Adapter . . . . . . . . . . . . . . . . . . . . 132

Tele-converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132

Wide Converter. . . . . . . . . . . . . . . . . . . . . . . . . . . . 132

Light Metering

Center-Weighted Averaging . . . . . . . . . . . . . . . . . . . 79

Evaluative . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Spot AE Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

M

Macro Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Magnifying Images. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134

Manual

Exposure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Shooting Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Menu

FUNC.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Rec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

147

Index

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Selecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Set up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68 - 71

Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Movie

Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Editing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

My Camera

Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

Registering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

N

Night Scene Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

O

Operation Sound . . . . . . . . .68, 69, 72, 116, 118, 119, 138

P

Photo Effect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Playback

Auto Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Index Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Jumping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Magnifying Images . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

148

Rotating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Single Image Playback . . . . . . . . . . . . . . . . . . . . . . . 57

Portrait Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Postcard Print Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Power On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 - 26

Power Saving. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

AC Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130

Rechargeable Batteries . . . . . . . . . . . . . . . . . . . . . 128

Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Selecting Images . . . . . . . . . . . . . . . . . . . . . . . . 98, 99

Print Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

Resetting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Print/Share Button . . . . . . . . . . . . . . . . . . . . . . . . . 15, 109

Program AE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Protect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

R

Recordable Images . . . . . . . . . . . . . . . . . . . . . . . . . . . 140

Red-Eye Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Resetting the settings to default . . . . . . . . . . . . . . . . . . 73

Ring Release Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Rotate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

S

Self-Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Shooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33, 64

Reviewing an Image . . . . . . . . . . . . . . . . . . . . . . . . . 36

Switching from Playback Mode. . . . . . . . . . . . . . . . . 26

TV Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

Shooting Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Functions Available. . . . . . . . . . . . . . . . . . . . . . . . . 151

Shutter

Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Shutter Speed Priority AE . . . . . . . . . . . . . . . . . . . . . 75

Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Shutter Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Pressing Halfway . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Pressing Fully . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Single Image Playback . . . . . . . . . . . . . . . . . . . . . . . . . 57

Slow Shutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Sound Memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Special Scene Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .136 - 143

Start-up

Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Stitch Assist Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Framing a Subject. . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Index

T

Telephoto . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Transfer (direct) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

Transfer Order

Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Selecting Images . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . .122 - 127

V

Video System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Viewfinder

LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 28

Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

W

WAVE Files . . . . . . . . . . . . . . . . 31, 92, 93, 118, 121, 137

White Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Wide Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Z

Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

149

FCC Notice (Digital Camera, Model PC1202)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions;

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the

FCC rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The cables with the ferrite core provided with the digital camera must be used with this equipment in order to comply with Class

B limits in Subject B of Part 15 on the FCC rules.

Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment.

Canon U.S.A. Inc.

One Canon Plaza, Lake Success, NY 11042, U.S.A.

Tel No. (516) 328-5600

Canadian Radio Interference Regulations

THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE

CAUSING EQUIPMENT REGULATIONS.

Réglementation canadienne sur les interférences radio

CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT

SUR LE MATERIEL BROUILLEUR DU CANADA

150

Functions Available in Each Shooting Mode

The following chart shows the functions and settings available in each Shooting mode.

Function

(1)

Resolution

Compression

Flash

Large

Medium 1

Medium 2

Small

Postcard Print

L O* O* O* O* O* O* O* U* – O* O* O* O*

M1 O O O O O O O U – O O O O

M2 O O O O O O O U –

S O O O O O O O U –

O O O O

O O O O

O O O O O O O – – O O O O

Movie

Movie

O

O*

Movie

Superfine

Fine

Normal

Auto

On

Off

Red-eye Reduction

Flash Output

AF-assist Beam

– – – – – – – – O –

O O O O O O O U – O

O

O

O

O* O* O* O* O* O* O* U* – O* O* O* O*

O O O O O O O U – O O O O

O* O* O O* O* O O* –

– O O O O O O U

O – – –

O O O O

O O O* O O O* O U* – O* O* O* O*

O

O

O

O

O

O

O

U

O O O O

– – – O

O O O O O O O U O O O O O

Reference

Pages

40

53

40

40

42

42

86

36

151

Function

(1)

Single Shot

Continuous

Mode

Drive

Mode

Self-timer

(10 sec.)

Self-timer

(2 sec.)

AF System Selection

AF Lock

Manual Focus

O*

O

O

O*

O

O

O

O

O

O*

O

O

O

O

O

O*

O

O

O

O

O

O*

O

O

O

O

O

O*

O

O

O

O

O

O*

O

O

O

– O O O O O O

O

O

U*

U

U

O*

O

O

O

O

O*

O

O

O

O

O

O

O*

O

O

O

O

O

O

O*

O

O

O

O

O

O

O*

O

O

O

O

O

O

Macro Mode O O – O O O O U O O O O O

ON O O O O O O O – – O O O O

Digital Zoom

Exposure Compensation

OFF O* O* O* O* O* O* O* –

– O O O O O O U

O

O*

O

O*

O

O*

O

O*

Light

Metering

System

Evaluative

Metering

Center-Weighted

Averaging

O

O

O

O

O

O

O

O

O

O*

O

O*

O

O*

O

O*

O

Spot Metering

White Balance

Photo Effect

(2)

(3)

– – – – – –

O O O O O –

(4)

– O O O O O –

(4)

– – O O O O

U O O O O O

U O O O O O

Reference

Pages

47

45

78

87

89

44

46

80

79

81

85

152

Function

ISO Speed

Auto Rotate

(1)

(4)

(4)

(4)

(4)

(4)

(4)

(4)

(4)

(4)

O O O O

(5)

ON O* O* O* O* O* O* O* U* – O* O* O* O*

OFF O O O O O O O U – O O O O

Reference

Pages

84

89

* : Default settings O : Available U: Available only for the first image – : Not available

: Setting remains in effect even when the camera is turned off.

The default for the settings changed by the menu and button operations can be restored all at once except for [Date/Time], [Language] and [Video System] (p. 73).

(1)The default setting of the flash for the [Foliage] and [Fireworks] options is [Off].

The following functions cannot be set in the [Fireworks] mode.

- The [Auto] and [On] setting of the flash

- Red-eye reduction function

- AF-assist beam

- AF System selection

- Macro mode

- AF lock

- Manual focus

(2)The photo effect [Sepia] and [B/W] cannot be selected.

(3)The white balance is set to [AUTO].

(4)Settings automatically set by the camera.

(5)ISO [AUTO] cannot be selected.

153

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • 3.3 MP CCD
  • Image sensor size: 1/2.7"
  • Optical zoom: 3x Digital zoom: 3.2x
  • Built-in microphone

Related manuals

Download PDF

advertisement

Table of contents